GLC2000_NP011117_GLC2000_01E16

Graphic Logic Controller
GLC2600T
GLC2400T
GLC2300T
GLC2300L
Graphic Logic Controller
2000
SERIES
Graphic Logic Controller
2000 SERIES
The Next-Generation of 1-Box Solution
that Lets You Build a Wide Range of Systems by
Integrating Information, Display and Control Functions
Graphic Logic Controller
NEW
2000 SERIES
As demands increase in every field for systems that can capitalize on today's IT advantages, everyone finds
themselves looking for the next solution. The Pro-face GLC Series offers exactly that, with a concept that revolutionizes
operation and display panels by placing all control functions at your fingertips. Ethernet-ready, this sophisticated
series brings new advances to the area of information control as well.
By meeting these pressing IT demands, the 1-box GLC Series points directly to the production systems of tomorrow.
Featuring the same specifications as higherlevel models, these compact units open the
capacity of IT solutions with network and
Internet. The TFT color LCD of the GLC2300T
delivers sharp, crisp images, while the
GLC2300L helps to keep costs down.
An aluminum
body for superb
cooling and dust
resistance.
The mid-size 5.7-inch models with network connectivity.
GLC
GLC2400T
2300T
GLC
l Model: GLC2300-TC41-24V
2300L
l Model: GLC2300-LG41-24V
* For use of GLC2300T/L, an add-on kit for GP-PRO/PBIII V5.05 and Pro-Control Editor V3.0 is required.
Interfaces
GLC2600T
11 9
1
10
1
2
GLC2600T
Printer Interface
Print out screen and production data.
8
The 7.4-inch size with 640 x 480 pixels resolution
meets a variety of applications, from large-size
equipment to panel integration.
Adding the Video-mix Unit allows simultaneous
video/PC display on the easy-viewing
12.1-inch screen of the top GLC model.
GLC
CF Card Interface
Removal storage media for production and screen data handling.
2600T
GLC
2400T
2
3
4
5 6
4
7
Ethernet Interface
Serial Interface (COM 1)
Connect your GLC to a host controller.
GLC2400T
9
1
5
3
Flex Network Interface
Connect to the high-speed GLC I/O system interfaces.
l Model: GLC2400-TC41-24V
l Model: GLC2600-TC41-24V
3
Connect to PLCs or data management system via a high-speed network.
6
Sound Output Interface
Output audio messages for alarming and instructions.
GLC2600T
Display
Color
Display Resolution
Application Memory
Data Backup Memory
Program Memory
Valuable Data Memory
Flex Network Master I/F
COM 1 (RS-232C/RS-422)
COM 2 (RS-232C)
Ethernet (10Base-T)
CF Card Interface
Sound Interface
Printer Interface, Narrow-pitch D-sub
Video-mix Bus Interface
1
12.1" TFT
GLC2400T
7.4" TFT
256 Colors
800 x 600 pixels
640 x 480 pixels
4MB FEPROM
256KB SRAM
128KB
32KB
2CH
Yes
Yes
Yes
Yes
Yes
Yes
Yes
GLC2300T
5.7" TFT
GLC2300L
7
5 6
Tool Connector
Transfer screen and system data.
5.7" LCD
Black & White
320 x 240 pixels
2MB FEPROM
4
8
4
GLC2300T/L
7
8
2
Expansion Serial Interface (COM 2)
Connect a serial device, such as two-dimensional code reader.
9
9
Expansion Unit Interface 1 (for network connection)
Connect to a field Network.
8
7
10
Expansion Unit Interface 2 (for optional Video Mix unit)
The optional Video-mix Unit can be connected to input video image and PC
screen data and output GLC screen data to an external monitor.
1
5
3
11
CF Card Front Maintenance Interface
Connect to the CF Card Front Maintenance Unit.
2
Greater 3-Way Expansion:
Information, Communication, and Control
Highly Functional Software
for a Variety of System Development Needs
1-way
Data Collection and Distribution
Information flows smoothly to and from the
host PC via a CF card or Ethernet, forming
a highly reliable system for process
control or data collection and providing
reliable, assured support for management
strategy building.
Easy data
transfer with
the CF card.
*Available Soon
Secured and real-time data exchange with commonly used
PC applications over CF card, Ethernet or the Internet.
Super-easy Control Programming
to Optimize the Performance
Logic Program Development
A Host of Functions to Simplify
System Development
Easy Maintenance and Real-time Monitoring
On-line Editing
High-speed and Remote Data Transfer
Ethernet Communication Supported
Increased System Expandability for Distributed Control
Web Operation Software
Data Collection Software
A Wide Range of Protocols Supported
GLCCNT-ED01W-V
**
2-way
GW-CJ01-V
**
Distributed I/O
Terminals for up to
1008 Points
Versatile interfaces support flexible
expansion for a control system that
meets your needs.
The remote I/O system contributes to
more reliable, high-speed control,
cutting costs and work for wiring.
To connect various
controllers
*For details of Flex Network, refer to the GLC catalogs or
contact your local sales representative.
Single-board computer
PC
Inverter
I/O Unit
Temperature
controller
PLC
SIO 2ch (COM 2)
Serial devices, such as bar
code reader or two-dimensional
code reader.
Expansion Bus
Fieldbus slave connection
• PROFIBUS • INTERBUS • CANopen
• DeviceNet
• Ethernet
16-point
Sink/Source Input
8-point Sink/Source Input,
8-point SinkTransistor Output
8-point Relay
Output / 1 Common
FN-X16TS41
FN-XY08TS41
FN-Y08RL41
16-point
Sink Output
16-point
Source Output
FN-Y16SK41
32-point
Sink/Source Input
High-speed
Counter Unit
FN-Y16SC41 FN-X32TS41*
FN-HC10SK41*
Analog Unit
The Video-mix Unit enables more
realistic monitoring and control
4-channel
Analog Input Unit
*Only for GLC2600T.
GLC
FN-AD04AH11
FN-DA04AH11
*Available Soon
Backed by Reliable Development Applications
Logic Program Development
Video images provide virtually on-site
monitoring of line conditions.
Dr
Professional Screen Creation
ag
a n d Dro p
GP-PRO/PBIII
for Windows
for Windows
GPW-PB01W-V
**
NEW
Flexible Displays of Windows
Font Images
Functions*
Instant Language Display Changes
On-line Selection of Multiple Languages
JPEG Screen Capturing for Status
Recording
Up to 16 different languages texts can be registered,
for on-line display change. The import/export functions
of multiple languages tables allow easy input and
translation on a CSV file.
256-color Library Parts
for Realistic Screens
BMP Images for Customizable Parts
Screen Editor
Servomotor
GLCCNT-ED01W-V
**
for Windows
GPW-PB01W-V
*To use GLC2300T/L, an add-on kit to GP-PRO/PBIII and Pro-Control Editor
is required.
3
By simply dragging the symbols you've created in
your ladder program onto the GP-PRO/PBIII for
Windows screen, all of the data (addresses, labels,
and names) required to create on-screen parts is
automatically set.
GLC uses the most popular control
language of ladder logic.
The instructions used in this software
were selected based on their frequency
and ease of use.
FN-PC10SK41 *
*Available Soon
Amplifier
Dynamic Link between
Control and Screen Data
Complete Set of Instructions
1-axis
Positioning Unit
4-channel Analog
Output Unit
VM
1-axis Positioning Unit
An I/O configuration can be made easily by
selecting an I/O unit to be used and then
dragging-and-dropping the created variable
name over the desired I/O terminal
diagram's I/O unit. The I/O configuration
screen is based on an image of the terminal
block, allowing you to quickly and intuitively,
Configure inputs and outputs.
Screen Editor
Precision equipment field, semiconductor
inspection line
Surveillance
camera
Flex Network
CF Card Memory Loader
Pro-Control
Adding the Video-mix Unit enables high-precision line surveillance and
control over the same screen. Remote operation and monitoring ensures
trouble free line control. Plus, the expandability of the GLC2600T with the
3-way control opens up a wealth of new production possibilities.
System example...
Easy-to-carry Tool for Control, Screen and Production
Data Maintenance
I/O Configuration
3-way
Ethernet
Useful Interfaces
to Meet Your Needs
SIO 1ch (COM 1)
PSW-ED01-V
**
**
English
French
German
*These feature will be available with GP-PRO/PBIII C Package01.
4
Connectable Controllers
PLCs
Fanuc
Ladder Logic Instruction List
FATEK
( µ sec)
Class
Type
Inst. Symbol
Speed (ON/OFF)
2600T/2400T
2300T/L
Normally
Open
NO
0.3
0.3
Normally
Closed
NC
0.3
0.3
( µ sec)
Class
Type
Inst. Symbol
Speed (ON/OFF)
2600T/2400T
ADD
EN DN
Add
ADD
A
C
0.3
2300T/L
Timer
On-Delay
0.3
B
1.7
N
NT
2.3
Subtract
1.7
SUB
A
C
0.3
Timer
Off-Delay
0.3
B
2.7
MUL
EN DN
Multiply
MUL
A
C
0.3
0.3
B
Output Coil
9.9
OUT
10
Negated Coil
M
M
9.9
0.3
NEG
IM
10
10
Unlatch Coil
RST
R
8
8.1
RM
RM
8
8.1
Latch Coil
SET
S
8
8.1
Latch
Retention Coil
SM
SM
8
8.1
AND
EN DN
AND
A
C
0.3
A
Speed (ON/OFF)
Inst. Symbol
TON
0.3
0.3
TOF
2600T/2400T
Series Name
CPU
F30
F50
F60
F70S
F80
F80H
F81
F120
F120H
F120S
F200
F250
NB1
NB2
NB3
NJ
NS
TON
IN Q
PT ET
Fuji
MICREX-F
2300T/L
7.8
9.9
MOD
A
C
0.3
TOF
IN Q
PT ET
11
Series Name
Timer Pulse
TP
TP
IN Q
PT ET
4
Series90-30
7.6
Series90-70
CTU
CE Q
Counter Up
CTU
8.5
7.7
R
DEC
EN DN
DEC
Decrement
A
0.3
Counter
Up Down
1.6
7.9
R
CTUD
CE Q
CTUD
Series Name
18.8
UP QU
R
QD
19.2
Hitachi
HIDIC-S10α
INC
EN DN
INC
Increment
A
0.3
BCD
Conversion
0.3
EQ
0.3
A
BCD
NEW
EQ
EN Q
Equal To (=)
BCD
EN DN
0.3
Encode*1
ENCO
A
HIDIC-H
1.9
B
ENCO
EN DN
A
3.6
B
1.9
4
B
GT
EN Q
GT
A
C
NEW
0.3
0.3
Decode*1
DECO
HIZAC EC
DECO
EN DN
A
1.5
B
S10mini
3.2
B
OR
OR
EN DN
A
C
0.3
0.3
Greater or
Equal To (>=)
3.1
GE
EN Q
GE
0.3
0.3
B
3.3
B
A
LT
Less Than (<)
XOR
XOR
EN DN
A
C
0.3
0.3
B
Less or
Equal To (<=)
A
LE
EN Q
LE
Jump
0.3
BMOV
0.3
0.3
Not Equal (<>)
A
3.4
B
4
FA-3S
MICRO3
MICROSmart
FC4A
(All-in-One Type)
–>>LabelName
JMP
0.3
0.3
Jump to
Subroutine
JSR
Return from
Subroutine
RET
MICROSmart
FC4A
(Slim Type)
–>>SubroutineName<<–
OpenNet Controller FC3
–<RETURN>–
Series Name
NEW
0.3
B
A
BIN
FA-2J
BIN
EN DN
B
BMOV
EN DN
A E
Block Move
Binary
Conversion
LT
EN Q
B
Exclusive
Logical Add
Izumi/Idec
NE
EN Q
NE
A
FOR
FOR
EN DN
A
Keyence
KZ-300
KZ-A500
Repeat*1
0.3
KV
0.3
NEXT
B
C
FA-2
NEXT
KV-700
D
File Move
FMOV
EN DN
A D
FMOV
B
* All instruction speeds given here are for your reference only. Instruction execution speed can vary slightly from the above value, depending on
program and memory conditions. For details, contact your local Pro-face distributor.
*1 These new instructions will be provided on GP-PRO/PBIII C Package01.
0.3
Movement Instructions
MOV
KOSTAC SZ
ROL
MOV
EN DN
IN OUT
ROL
EN DN
A
0.3
0.3
As shown in this diagram, the GLC scan time consists of the time to execute the logic
(ladder) program and the time for graphic/communication/touch processing. The time
required to execute the logic program is called "logic time."
C
0.3
0.3
Reads the input
ROR
EN DN
ROR
A
C
Writes the
output
Scan
START
(10ms min.)
0.3
Graphic/communication/
touch processing
Shift Left
SHL
A
C
0.3
0.3
N
Shift Right
SHR
SHR
EN DN
A
N
5
C
0.3
0.3
: Scan time
Series Name
Matsushita
Electric
Reads all input from the I/O driver.
Run
Executes the logic program.
: Logic time
Graphic
Phase
Panadac 7000
Series Name
Read
Write
0.3
N
SHL
EN DN
DL-205
DL-305
DL-405
Example
Scan time: 10ms
Logic time: 4ms (from the "Logic Execution Speed" reference above)
Graphic/communication/touch processing time: 10-4 = 6ms
N
Rotate Right
KOSTAC SR
GLC Scan Time (Program Execution Cycle)
Runs the logic program
Rotate Left
KOSTAC SU
0.3
C
Move
Koyo/PLC Direct
Series Name
KOSTAC SG
Writes all output to the I/O driver.
Screen refresh, communication and touch
processing (including SIO communication)
*The scan time is set by the operator, but it is automatically adjusted every
64 scans and includes an error of approximately 0.02%.
Matsushita
Electric Works/NAIS
MEWNET
Series Name
Mitsubishi
MELSEC-A
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Direct
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Modicon
Series Name
Omron
Direct
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
SYSMAC α
●
●
●
●
●
●
SYSMAC CV
(EH-CPU448)
●
SYSMAC CS1
●
●
●
Link
Direct
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
SYSMAC CJ
ORIM VEXTA
Rockwell
(Allen-Bradley)
CPU
P7000-PLC-001
P7000-PLC-031H
P7000-PLC-031S
P7000-PLC-A01
Link
●
●
●
●
●
●
●
●
●
●
●
Direct
Link
●
●
●
●
●
●
●
●
Shinko
Siemens
(SIMATIC)
●
●
●
●
●
●
●
●
●
●
●
●
Series Name
SELMART
SIMATIC-S5
SIMATIC S7-200
Multi-Link
●
SIMATIC S7-400
SIMATIC 505
●
●
●
●
●
New Satellite JW
Direct Multi-Link Ethernet CC-Link
●
●
SLC500
Series Name
●
●
●
●
●
●
●
●
●
CPU
SIMATIC S7-300
●
●
●
●
●
●
●
Series Name
Series Name
Sharp
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Toshiba
Series Name
PROSEC EX
PROSEC T
PROVISOR B
Series Name
Toshiba Machine
CPU
C20H
C28H
C40H
C120
C120F
C200H
C200HS
C500
C500F
C1000H
C1000HF
C2000
C2000H
CQM1-CPU11
CQM1-CPU42
CQM1H-CPU21
CQM1-CPU51
CQM1-CPU61
CPM1-20CDR-A
CPM2A
CPM2C
SRM1-CO2
C200HE-CPU42
C200HE-CPU42-Z
C200HG-CPU43
C200HG-CPU63
C200HX-CPU44
C200HX-CPU64
C200HX-CPU64-Z
C200HX-CPU85-Z
CV500
CV1000
CVM1
CS1G-CPU42
CS1G-CPU43
CS1G-CPU44
CS1G-CPU45
CS1H-CPU63
CS1H-CPU64
CS1H-CPU65
CS1H-CPU66
CS1H-CPU67
CJ1G-CPU44
CJ1G-CPU45
CPU
CPU11
ControlLogix 5550
●
●
●
●
●
●
●
●
●
●
Direct Multi-Link Ethernet CC-Link
Link
●
●
●
Series Name
Toyota
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Direct
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Control Pack
Memocon Micro
PROGIC-8
MP900
Series Name
Yokogawa
●
●
PROVISOR TC200
SLC-5/01
SLC-5/02
SLC-5/03
SLC-5/04
PLC-5 Series
PLC-5/11
PLC-5/20
PLC-5/30
PLC-5/40
PLC-5/40L
PLC-5/60
PLC-5/60L
1756-L1
1756-L1M1
1756-L1M2
1756-L1M3
Link Direct 1:n
STARDOM
Series Name
Fuji
●
●
●
●
●
CPU
TCCUH
TCCUHS
TCCUSS
FVR-E11S
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Series Name
Mitsubishi
FREQROL-A500
FREQROL-A500L
FREQROL-E500
FREQROL-F500
*
*
●
●
●
●
FREQROL-F500L
●
●
FREQROL-S500
●
●
FREQROLB, B3
●
Series Name
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Fuji
Micro Controller-X(PXR)
Toho
Series Name
TTM-004
TTM-X04
TTM-00B
TTM-10L
TTM-100B
TTM-110
TTM-110B
Link
●
TTM-120
Multi- Device
DH+
Link -Net
DF1
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
DH Remote
485 I/O
●
●
●
●
TTM-300
TTM-300B
●
TTM-1020
●
●
●
●
*
*
*
*
Multi-Link
●
●
●
●
●
●
●
SR-Mini
INTERBUS
Series Name
Shinko Technos
C
FC
*
*
*
*●
FIR
●
●
●
●
●
GC
FCL
●
PC-900
Series Name
Yamatake
SDC
DMC
Link
●
●
●
●
●
●
●
●
●
Multi-Link
●
Link
●
●
●
●
●
●
●
●
●
Device
Link Direct 1:n Multi- n:m Ethernet
-Net
Link
●
●
●
●
●
●
●
●
●
Inverter
FRN□□G11S-2
FRN□□G11S-4
FRN□□P11S-2
FRN□□P11S-4
FVR□□□E11S-2
FVR□□□E11S-7
FVR□□□C11S-2
FVR□□□C11S-6
FVR□□□C11S-7
1:n
●
●
Inverter
FR-A520-□K
FR-A540-□K
FR-A520L-□K
FR-A540L-□K
FR-E520-□K
FR-E540-□K
FR-E520S-□K
FR-E510W-□K
FR-F520-□K
FR-F540-□K
FR-F520L-□K
FR-F540L-□K
FR-S510W-□K-R
FR-S520-□K-R
FR-S520S-□K-R
FR-B-□K
FR-B3-□□□K
1:n
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
1:n
CB Series
Direct Profibus MPI
●
●
●
●
Temperature Controllers
E5EN-□□□□□-FLK
E5CN-□□□□□-FLK
E5GN-□□□□□-FLK
E5AN-□□□□□-FLK
E5_N Digital
Temperature Controller
Series Name
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
1:n
RKC
●
●
●
●
●
●
●
●
Multi-Link
Temperature Controllers
TTM-004-□-A□□□
TTM-X04-□-□□□□
TTM-00B-□-□□□□
TTM-10L-□-□-□
TTM-100B4-□□-□□□□-□□□
TTM-100B8-□□-□□□□-□□□
TTM-114-□-□□-□□□□□□-□
TTM-115-□-□□-□□□□□□-□
TTM-117-□-□□-□□□□□□-□
TTM-119-□-□□-□□□□□□-□
TTM-110B-□-□□-□□□□□□-□
TTM-124-□-□□-□□□□□□-□
TTM-125-□-□□-□□□□□□-□
TTM-127-□-□□-□□□□□□-□
TTM-129-□-□□-□□□□□□-□
TTM-304-□-□N-□□□□-□
TTM-305-□-□N-□□□□-□
TTM-309-□-□N-□□□□-□
TTM-300B-□-□N-□□□□-□
TTM-1520-□□-□□-□□□-□
TTM-1521-□□-□□-□□□-□
TTM-1522-□□-□□-□□□-□
TTM-1523-□□-□□-□□□-□
TTM-1524-□□-□□-□□□-□
TTM-1525-□□-□□-□□□-□
TTM-1920-□□-□□-□□□-□
TTM-1921-□□-□□-□□□-□
TTM-1922-□□-□□-□□□-□
TTM-1923-□□-□□-□□□-□
TTM-1924-□□-□□-□□□-□
TTM-1925-□□-□□-□□□-□
●
●
●
●
●
●
●
●
Direct
1:n
Modular Dual Loop
Temperature Controller
●
Link
Link
●
●
●
●
●
●
●
●
●
Temperature Controllers
PXR4□□□□-□□M00
PXR4□□□□-□□V00
Series Name
OMRON
Link
Link
Temperature Controllers
●
●
CPU
SELMART
CPU
EX2000
T3
T3H
T2N
T2E
B200CH
B200CUF
B200CURM
B200CUFRM
FRENICS5000G11S
FRENICS5000P11S
Multi- Device Ethernet
Link -Net
●
●
●
●
●
●
●
●
●
●
●
●
Inverters
FVR-C11S
CPU
JW20
JW-32CUH
JW-32CUH1
JW-33CUH3
JW50
JW70
JW100
CPU
S5 90U
S5 95U
S5 100U
S5 115U
S5 135U
S5 155U
CPU212
CPU214
CPU221
CPU222
CPU224
CPU226
CPU312IFM
CPU313
CPU314
CPU315
CPU315-2DP
CPU413-2DP
SIMATIC545-1101
SIMATIC545-1102
SIMATIC545-1103
SIMATIC545-1104
SIMATIC545-1105
SIMATIC545-1106
SIMATIC555-1101
SIMATIC555-1102
SIMATIC555-1103
SIMATIC555-1104
SIMATIC555-1105
SIMATIC555-1106
CPU
FA500
FA-M3
FCN
FCJ
FACTORY ACE
Modbus Plus(n:m)
●*2
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Memocon-SC
1:n
●
●
●
●
CPU
U84
U84J
U84S
GL40S
GL60S
GL60H
GL70H
GL120
GL130
CP-9200
CP-9200H
CP-9200SH
Micro
PROGIC-8
MP920
MP930
Series Name
Yaskawa
Link
CPU
PC2
L2
PC2J
PC3J
TOYOPUC-PC2
TOYOPUC-PC3
●
●
●
●
●
●
●
●
CPU
–
884
984A/984B
Series Name
E1
PLC-5
Link
Link
SYSMAC C
Multi-Link DeviceNet
CPU
SG-8
SU-5
SU-6
SU-6B
SZ-4
SR-21
SR-22
D2-240
D3-330
D4-430
D4-440
CPU
AOJ2
AOJ2H
A1N
A1S
A1SH
A1SJ
A1SJH
A1SCPUC24-R2
A2A
A2A-S1
A2CCPUC24
A2CJ-S3
A2N
A2N-S1
A2S
A2SH
A2U
A2U-S1
A2US
A2US-S1
A2USH-S1
A3A
A3H
A3N
A3U
A4U
CPU
F2-20M
F2-40M
F2-60M
A1FX
FX0
FX0N-60MR
FX1
FX1S
FX2
FX2C
FX2N
FX2N-64MR
FX2NC-32MT
Q2A
Q2A-S1
Q2AS
Q2ASH
Q2AS-S1
Q3A
Q4A
Q4AR
Q00CPU
Q00JCPU
Q01CPU
Q02CPU
Q02CPU-A
Q02HCPU
Q02HCPU-A
Q06HCPU
Q06HCPU-A
Q12HCPU
Q25HCPU
*1 The GP becomes a slave. *2 The connection port varies depending on the model.
Direct
Link
Multi-Link
CPU
KZ-300
●
●
KZ-350
●
●
KZ-A500
●
●
KV-10
●
KV-16
●
KV-24
●
KV-40
●
KV-700*
●
●
*The KZ-700 uses the KZ-300 and KZ-A500 protocol.
CPU
FP2
FP3
FP5
FP10(S)
FP1
FP-M
FP10SH
FP0
Series Name
Modbus Master*1
884/984
Link
CPU
PF2-CPU1
PF2-CPU5M
PF2J-CPU1
PF3S-CP11
PF3S-CP12
PF3S-CP13
MICRO3
FC4A-C10R2B
FC4A-C16R2B
FC4A-C24R2B
FC4A-D20K3
FC4A-D20S3
FC4A-D20RK1
FC4A-D20RS1
FC4A-D40K3
FC4A-D40S3
FC3A-CP2K
FC3A-CP2S
MELSEC-QnA
MELSEC-Q
Link
CPU
CPU311
CPU331
CPU360/363/364
CPU313/323
CPU340/341
CPU350/351/352
CSE311/313
CSE323/331/340
CPU731/732
CPU771/772
CPU780/781/782
CPU
2α(LWP000)
2αE(LWP040)
2αH(LWP070)
4α
4αF
2αHf(LWP075)
H20
H28
H40
H64
H-200
H-252C
H-300
H-302
H-700
H-702
H-2000
H-2002
H4010
EH-150
MICRO-EH
EC-40HR
LQP000
LQP010
LQP011
T-Link
●
CSE924/925
CPX772/782
CPX928
7.9
PV CV
Conversion
Logic Operation
Logical Add
NOT
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
CSE784
Series Name
Bit Negation
●
CPU788/789
PV CV
MELSEC-F2
MELSEC-FX
Direct
Link
CPM790
Counter Down CTD
Mitsubishi
●
Direct
CGR772
Greater
Than (>)
NOT
EN DN
A C
●
CGR935
B
Series Name
Direct
Link
CPM915/925
CPX935
PV CV
CTD
CE Q
0.3
12
GE Fanuc
Automation
MOD
EN DN
0.3
B
C
B
Residual
Processing
NM
Logical
Multiply
DIV
0.3
Negated
Retention Coil
Unlatch
Retention Coil
Divide
10
Mathematical Instructions
Bit Manipulation
DIV
EN DN
Retention Coil
CPU
20MC
FLEX-PC
Timer/Counter Instructions
Negative
Transition
P
PT
Type
Class
CPU
16-MC
Power Mate
Series Name
Facon FB
( µ sec)
SUB
EN DN
Positive
Transition
Series Name
FANUC Series
FANUC Power Mate
(Motion Controllers)
Series Name
Ethernet
Yokogawa M&C
●
●
UT2000
GREEN SERIES
E5ZN-□□□□□-FLK
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Temperature Controllers
CB100 Z-1021
CB400 Z-1021
CB500 Z-1021
CB700 Z-1021
CB900 Z-1021
H-PCP-A Z-1021
1:n
Temperature Controllers
CPT-20A
FCD-13A□□ ,C
FCD-13A□□ ,C5
FCD-15A□□ ,C
FCD-15A□□ ,C5
FCR-13A□□ ,C
FCR-13A□□ ,C5
FCR-15A□□ ,C
FCR-15A□□ ,C5
FIR-201-M□□ ,C
FIR-201-M□□ ,C5
GCS-300□□,C5
FCL-13A□□,C5
PC-935□□ ,C
PC-935□□ ,C5
PC-955□□ ,C
PC-955□□ ,C5
1:n
Temperature Controllers
SDC20
SDC21
SDC30
SDC31
SDC40A
SDC40B
SDC40G
DMC10
1:n
Temperature Controllers
UT2400-□
UT2800-□
UT320-□1
UT350-□1
UT420-□7
UT450-□1
UT450-□2
1:n
Servo
M□DA□□□□□□
MUDS□□□□□□
1:n
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Servo
Series Name
Matsushita
Electric
MINAS-A
MINAS-S
Indicates newly tested connection confirmation.
●
●
Indicates newly supported protocol.
* ··· Under development (Tentatively scheduled to be marketed in February 2002.)
• The newly supported drivers require "GP-PRO/PBIII for Windows" Version 6.0. *Available soon
• These drivers are included in the "GP-PRO/PBIII for Windows" Version 6.0 software package. Please check with your local Pro-face distributor for recently available drivers not listed here.
• Each connection requires a specific Link Unit, connection option(s), and cable. Various precautions must also be observed. Please refer to the GP-PRO/PBIII for Windows Equipment Connection Manual for this information.
An I/F Unit may also be required, limiting application to large-type connections.
• n:1(Multi-link) = multiple GP : 1 PLCs * 1:n = 1 GP : multiple PLCs * n:m = multiple GP : multiple PLCs
6
Built-in Interface Specifications
Functional Specifications
Model
Item
GLC2600-TC41-24V
Type
Colors
GLC2300-TC41-24V
GLC2300-LG41-24V
Monochrome
Black and White
CCFL (average lifespan of 50,000 hours min.
CCFL (average lifespan of 50,000 hours min.
with continuous operation)
with continuous operation) User replaceable.
320 x 240 pixels
640 x 480 pixels
800 x 600 pixels
W246.0mm [9.69in.] x H184.5mm [7.27in.]
W149.8mm [5.9in.] x H112.3mm [4.42in.]
W115.2mm [4.54in.] x H86.4mm [3.40in.]
4 levels via touch panel
8 levels of adjustment available via touch panel.
ASCII: (Code page 850) Alphanumeric (including European fonts), Chinese: (GB2312-80 codes) simplified Chinese fonts, Japanese:
ANK 158 type, Kanji: 6962 types (JIS Type 1 and 2), Korean: (KSC5601-1992 codes) Hangul fonts, Taiwanese: (Big 5 codes) traditional Chinese fonts
80 char. x 60 rows
40 char. x 30 rows
100 char. x 75 rows
80 char. x 30 rows
40 char. x 15 rows
100 char. x 37 rows
40 char. x 30 rows
20 char. x 15 rows
50 char. x 37 rows
10 char. x 7 rows
20 char. x 15 rows
25 char. x 18 rows
8 x 8 pixels, 8 x 16 pixels, 16 x 16 pixels, 32 x 32 pixels
Width: 1, 2, 4 or 8 times expandable/Height: 1/2, 1, 2, 4 or 8 times expandable
4MB FLASH EPROM(approx.1280 screens at 3.2KB/screen)
2MB FLASH EPROM
SRAM 256KB – uses lithium battery*4
Backlight
CCFL (average lifespan of 50,000 hours min.with continuous operation) User replaceable.
Resolution
Nominal Display Area (mm)
Brightness Control
Contrast Control
Text Displayable
Characters
Language Fonts*2
8 x 8 Dots
8 x 16 Dots
16 x 16 Dots
32 x 32 Dots
Display Sizes*2
Font Sizes
Application
Memory
Data Backup
Control Program Area
3
Memory* Variable Area
Serial (COM 1)
Expansion Serial
(COM 2)
Ethernet
128KB FEPROM
SRAM 32KB – uses lithium battery*4
Asynchronous Transmission Method: RS-232C/RS-422 Data Length: 7 or 8 bits Stop Bit: 1 or 2 bits Parity: None, Odd or Even Data Transmission Speed: 2400 to 115.2kbps
Asynchronous Transmission Method: RS-232C/RS-422 Data Length: 7 or 8 bits Stop Bit: 1 or 2 bits Parity: None,
Odd or Even Data Transmission Speed: 2400 to 38.4kbps
IEEE802.3 (10Base-T)
Synchronous TTL level nonprocedure command I/F
<During screen creation> Used to connect a data transfer cable for transferring data from screen creation software.
<During logic program development>Used to connect a data transfer cable for transferring data from logic program development software.
<During Operation>Used as a bar code reader and serial printer. (Conforms to NEC PC9801 keyboard I/F.)
Tool Connector
1 slot (CompactFlash™)
CF Card Front Maintenance Unit Connector
Compatible with NEC PC-PR201/PL , EPSON ESC/P24-J84(C), HP Laser Jet PCL 4 command printer *5
External Reset Input (1), Input Voltage: DC24V±10%, Input Current: 4mA (TYP),
Min. Pulse Width: 2ms, Operating Voltage: ON Voltage Min. DC21.1V, OFF Voltage Max. DC3V, Isolation: Photocoupler
CF Card
External CF Card
Printer
Auxiliary Input/Output
Expansion Unit I/F 1
Expansion Unit I/F 2
Communication Configuration
Connection Method
Max. Distance
Communication Method
Communication Speed
Communication I/F
Error Check
Max. Number of Nodes
Flex Network
External Interfaces
GLC2400-TC41-24V
TFT Color LCD
256 colors, No blink/64 colors, 3-speed blink (software control)*1
Sound Output
GLC Distributed I/O, Flex Network, I/F Specifications
This high-speed remote I/O unit for 6Mbps/12Mbps data communication can be used without giving the impression of being remote.
Up to 1008 I/O points can be connected, with a communication delay time of only 0.94ms (for 512 points at 12Mbps).
The network can be extended up to 400 meters (2 channels at 6Mbps).
I/F Connector (GLC2600T/2400T)
Communication
Configuration
1:N
Connection
Method
Multi-Drop Connection
Max. Distance
200m/channel at 6Mbps,
100m/channel at 12Mbps
Communication
Method
6Mbps/12Mbps (selectable)
Communication
Speed
Differential,
pulse-transformer isolation
Communication
I/F
Cyclic Time Division, half-duplex
-*6
-
Yes
Pin No.
Signal Name
1
2
3
4
5
6
7
8
9
10
11
12
AUXCOM
AUXRESET
TR+
TRSLD
TR+
TRSLD
RESERVE
SP OUT
GND
LINE OUT
-
Yes
1: N
Multi-Drop Connection
200m/channel at 6Mbps, 100m/channel at 12Mbps
Cyclic Time Division, half-duplex
6Mbps/12Mbps
Differential, pulse-transformer isolation
Format, bit, CRC-12 verification
63 (1008 I/O points)
External Speaker Connection (Terminal Block) Monaural 1CH Speaker Output 70mW (Rated Load: 8Ω, Frequency: 1kHz)
Sound Line Out Output 2.7Vp-p (Rated Load: 10kΩ) Recommended wire: AWG#28 to #16
Ext.Reset
1
Flex
Network
––
12
Sound
Output
I/F Connector (GLC2300T/L)
Pin No.
Signal Name
1
2
3
4
5
6
TR+
TRSLD
TR+
TRSLD
-
*1 Changing the "Colors" setting to "256 colors" will disable the blink feature on all of your project’s screen. If you wish to use the blink feature, do not change this setting to "256 colors".
*2 The display font varies depending on the selected language and expansion ratio.
*3 The 128-KB program area is allotted in SRAM for online editing use.
*4 A lithium battery's lifetime is: 10 years when the battery's ambient temperature is under 40˚C, 4.1 years when the battery's ambient temperature is under 50˚C,
1.5 years when the battery's ambient temperature is under 60˚C, When used for backup: Approximately 60 days, with a fully charged battery Approximately 6 days, with a half-charged battery.
*5 Printers with only Windows drivers cannot be used. However, certain types of printers with both Windows® and DOS® drivers can be used. For details, contact your local Pro-face distributor.
*6 GLC2300T/L supports serial printers.
Pin Assingments
Condition
External Reset Common
External Reset Input
CH1 Communication Data
CH1 Communication Data
CH1 Cable Shield Line
CH2 Communication Data
CH2 Communication Data
CH2 Cable Shield Line
Reserve
Speaker Output
Ground
Sound Lineout Output
Error Check
Format, bit, CRC-12 verification
Max. Number
of Nodes
63 (number of occupied points
varies according to I/O units)
Pin Assingments
Condition
CH1 Communication Data
CH1 Communication Data
CH1 Cable Shield Line
CH2 Communication Data
CH2 Communication Data
CH2 Cable Shield Line
1
6
General Specifications
Structural
Environmental
Electrical
Item
Model
GLC2600-TC41-24V
GLC2400-TC41-24V
GLC2300-TC41-24V
GLC2300-LG41-24V
Input Voltage
DC24V
DC19.2~DC28.8V
Rated Voltage
Power Consumption
50W or less
28W or less
22W or less
Allowable Voltage Drop
10ms or less
Voltage Endurance
AC1000V at 20mA for 1 minute (between charging and FG terminals)
Insulation Resistance
Above 20MΩ at DC500V (between charging and FG terminals)
Ambient Operating Temperature
0˚C to 50˚C*7
Storage Temperature
-20˚C to 60˚C
10~90%RH (non-condensing, drybulb temperature: 39˚C or less)
Ambient Humidity
Storage Humidity
10~90%RH (non-condensing, drybulb temperature: 39˚C or less)
Vibration Resistance
IEC61131-2(JIS B 3501)Compliant When vibration is NOT continuous:10Hz to 57Hz 0.075mm, 57Hz to 150Hz 9.8m/s2 When vibration is continuous:10Hz to 57Hz 0.035mm, 57Hz to 150Hz 4.9m/s2 X, Y, Z directions for 10 times (80min.)
Noise Immunity
Noise Voltage: 1500Vp-p,
Noise Voltage: 1000Vp-p,
Pulse Duration: 1 µs Arise time: 1ns
Pulse Duration: 1 µs Arise time: 1ns
(via noise simulator)
Electrostatic Discharge Immunity
Contact discharge of 6kV (IEC 61000-4-2 Level 3)
3
0.1mg/m
or
less
(non-conductive
levels)
Dust
Atmospheric Endurance
800hPa to 1,114hPa (2,000 meters or lower)
Atmosphere
Free of corrosive gases
Grounding
100Ω or less, or your country's applicable standard
Rating
Equivalent to IP65f (JEM1030) *8, and NEMA TYPE#250 4 x / 12(limited to the front face after installation in a panel)
Certifications
EN55011, EN61000-6-2, UL / C-UL1604
EN55022 Class A, EN50082-2, UL60950
External Dimensions
W171mm [6.73in.] x H138mm [5.43in.] x D60mm [2.36in.]
W317mm [12.48in.] x H243mm [9.57in.] x D58mm [2.28in.] (main unit only)
W215mm [8.46in.] x H170mm [6.69in.] x D60mm [2.36in.]
Weight
1.2kg (2.6lb) or less (main unit only)
3.5kg (7.7lb) or less (main unit only)
1.7kg (3.7lb) or less
Natural air circulation
Cooling Method
*7 Operating temperature reflects the panel external (GLC unit front face) and panel internal temperatures.
*8 The degree of protection provided by these products is equivalent to IP65f, however their performance cannot be guaranteed
for every environment. Be sure to confirm your work environment requirements prior to installation.
GLC2400T
58 [2.28]
8 [0.31]
GLC2300T/L
1
60 [2.36]
60 [2.36]
7.5 [0.3]
Serial I/F (COM 2) Specifications
Pin No. Signal Name Signal Direcyion
204.0 [8.03]
317 [12.48]
5 [0.2]
215 [8.46]
171 [6.73]
138 [5.43]
123 [4.84]
170 [6.69]
159.0 [6.26]
227 [8.94]
243 [9.57]
<Panel Cut Dimensions>
Unit: mm [in.]
7
]
Under 4-R3
Unit: mm [in.]
Input
Request send (RS-232C)
CS
Clear send (RS-232C)
6
NC
No connection
7
SG
Signal ground
8
CD
Carrier detect (RS-232C)
9
TRMX
Termination (RS-422)
10
RDA
Receive data A (RS-422)
11
SDA
Send data A (RS-422)
12*
RESERVE
Reserve
13*
RESERVE
Reserve
14
VCC
5V ±5% output 0.25A
15
SDB
Send data B (RS-422)
16
RDB
Receive data B (RS-422)
17
NC
No connection
18
CSB
Clear send B (RS-422)
Enable receive (RS-232C)
Receive data (RS-232C)
Clear send A (RS-422)
22
ERA
Enable receive A (RS-422)
23
NC
No connection
24
NC
No connection
25
NC
No connection
Send data (RS-232C)
Output
Enable receive (RS-232C)
5
SG
––––––
Signal Ground
6
DR
Input
Dta set ready (RS-232C)
Input
RS
5
CSA
ER
Input/Output
4
21
4
CS
Receive data (RS-232C)
Enable receive B (RS-422)
Input
RI/VCC
Send data (RS-232C)
RD
ER
Input
9
SD
3
ERB
SD
8
2
20
Request send (RS-232C)
Pin Assingments
5
1
9
6
Pin Assingments
Condition
Frame ground
19
Condition
RD
Output
FG
Carrier detect (RS-232C)
3
RS
1
1
14
25
13
*Pins 12 and 13 are reserves. Do not connect anything to them.
Clear send (RS-232C)
Ring Indicate (RS-232C)
+5V+5% 0.25A
0 ]
156+10 [6.14 +0.04
Under 4-R3
Unit: mm [in.]
0 ]
123.5 +10 [4.86+0.04
[8.05
159.5 +10 [6.28 +0.04
0 ]
Under 4-R3
0 ]
227.5 +10 [8.96 +0.04
204.5
+0.04
0
CD
I/O Connector Specifications
Pin No. Signal Name
Common I/F Specifications
<Panel Cut Dimensions>
301.5 +10 [11.87 +0.04
0 ]
+1
0
XM2D-0901 (Omron)
XM2S-0913 (Omron)
XM2Z-0073 (Omron)
2
7
<Panel Cut Dimensions>
Asynchronous: RS-232C/RS-422;
data length: 7 or 8bits;
stop bit: 1 or 2bits; parity: none,
odd or even; transmission rate: 2400 to 115.2Kbps
Serial I/F
I/O Connector Specifications
155 [6.10]
301 [11.85]
Recommended Connector: Dsub 25-pin plug XM2A-2501 (Omron)
Recommended Cover:
Dsub 25-pin cover XM2S-2511 (Omron)
Jack Screw
XM2Z-0071 (Omron)
* Use M2.6 x 0.45 coarse thread screws to mount.
Recommended Cable:
CO-MA-VV-SB5P x 28AWG (Hitachi Cable)
Recommended Connector: Dsub 9-pin socket
Recommended Cover:
Dsub 9-pin cover
Jack Screw
External Interfaces
GLC2600T
Serial I/F (COM 1) Specifications
Tool Connector
Tool Connector
Asynchronous: TTL level non-procedural command Connect
data transfer cable for transferring data,
serial printer, Bar code reader
* GLC2300T/L support serial printer connection.
8
GLC Distributed I/O System
Available Soon
Flex Network I/O Specifications
Available Soon
1-axis Positioning Unit (FN-PC10SK41)
High-speed Counter Unit (FN-HC10SK41)
The Flex Network 1-axis Positioning Unit allows positioning
data to be shared by the Unit and the GLC.
Freely changeable counter input. Meets a variety of counting
applications, and allows versatile input and output.
Analog Units
DIO Terminals
32-point Sink/Source Input
FN-X32TS41
8-point Sink/
Source Input,
8-point Sink
Transistor Output
8-point
Relay Output/
1 Common
FN-X16TS41
FN-XY08TS41
FN-Y08RL41
16-point
Sink Output
16-point Source
Output
FN-Y16SK41
FN-Y16SC41
16-point Sink/Source Input,
16-point Source Transistor Output
4-channel
Analog Input Unit
4-channel
Analog Output Unit
FN-AD04AH11
FN-XY16SC41
FN-DA04AH11
DC24V
DC24V
Allowable Voltage Range
DC20.4~28.8V
DC20.4~28.8V
Allowable Voltage Drop
10ms or less (for DC24V power supply)
10ms or less (for DC24V power supply)
Internal Power Consumption
Under 1.5W
Under 1.0W
Under 4.8W
Under 1.5W
Voltage Endurance
AC1500V at 10mA for 1 minute (between inputs/outputs and FG terminal),
AC500V for 1 minute (between primary and secondary sides of power supply)
Insulation Resistance
Above 10MΩ at 500VDC (between charging and non-charging parts)
Above 10MΩ at 500VDC (between charging and non-charging parts)
0 ~ 55˚C
0 ~ 55˚C
Storage Temperature
–25 ~70˚C
–25 ~70˚C
Ambient Humidity
30% RH to 95% RH (non-condensing) Level RH-1
30% RH to 95% RH (non-condensing) Level RH-1
Storage Humidity
30% RH to 95% RH (non-condensing) Level RH-1
30% RH to 95% RH (non-condensing) Level RH-1
0.1mg/m3 or less (non-conductive levels)
Dust
0.1mg/m3 or less (non-conductive levels)
Free of corrosive gases
5Hz to 55Hz, 60m/s2 for 2 hours each in X, Y, and Z directions
*1
Noise Immunity (via noise simulator)
Noise voltage: 1000Vp-p, Pulse Duration: 1µs, Arise time: 1ns
Noise voltage: 1000Vp-p, Pulse Duration: 1µs, Arise time: 1ns
Electrostatic Discharge Immunity
Contact discharge of 6kV (IEC 61000-4-2 Level 3)
Contact discharge of 6kV (IEC 61000-4-2 Level 3)
Mounting Method
35-mm DIN track or screw mounting
35-mm DIN track or screw mounting
Cooling Method
Natural air circulation
Natural air circulation
Weight
Max. 0.15kg (0.3lb)
Max. 0.35kg (0.8lb)
External Dimensions
108mm (W) x 45mm (H) x 49mm (D)
4.25in (W) x 1.77in (H) x 1.92in (D)
168mm (W) x 50mm (H) x 50mm (D)
6.61in (W) x 1.96in (H) x 1.96in (D)
Rating
IP20
IP30
Input Terminal Rated Voltage
DC24V
Input Terminal Allowable
Voltage Range
DC20.4~28.8V
16 points
Input
Input Points
12bit
––
4 (fixed)
––
Conversion
Time
Max. 2msec/4 channels
0 to 5V
0 to 5V
––
(impedance 1MΩ)
(impedance 1kΩ)
Input OFF Voltage
Max. DC5V
––
Input Impedance
4.1kΩ
––
OFF – ON
Max. 1.5ms
––
0 to 10V
0 to 10V
ON – OFF
Max. 1.5ms
––
(impedance 1MΩ)
(impedance 1kΩ)
Power Consumption
Output Points
Output Current
DC24V
––
DC20.4~28.8V
––
––
––
1 common, max.
common current 1.6A)
1.2W or less
(with all outputs
ON/DC24V)
8 points/
1 common
––
––
16 points
(open drain
sink output)
0.2A/point
(16 points/1 common,
max. common current 2.0A)
1.0A/point (8 points/
––
Max. Load Current
Available Soon
Input/
Output
Range
––
1W or less
(with all outputs
ON/DC24V)
8 points
(open drain
sink output)
0.2A/point (8 points/
––
1 common, max.
common current 4.0A)
Short-circuit Protection
––
None
––
None
Voltage Drop (ON Voltage)
––
Max. DC1.5V
––
Max. DC1.5V
Clamp Voltage
––
DC39V±1V
––
DC39V±1V
Leakage Current
––
Max. 0.1mA
––
0.1mA
OFF – ON
––
Max. 1ms
Max. 10ms
Max. 1ms
ON – OFF
––
Max. 1ms
Max. 5ms
Max. 1ms
Output
Delay
Item
Contact Rating
––
load, dielectric load)
1A at DC24V (resistive
load, dielectric load)
Min. Closing Load
––
1mA/DC5V
––
Initial Contact Resistance
––
Max. 50mΩ
––
Electrical Lifetime
––
Min. 100,000 operations
––
Mechanical Lifetime
––
Min. 20,000,000 operations
––
1
Control Input Method
DC24V photocoupler isolation
Programming Method
Sequence program and teaching loader via LogiTouch
90 points (ABS/INC)
Pulse Output Method
CW/CCW method, line driver output/open collector output
Output Frequency
250k/500k/1 M/2Mpps, parameter selectable
Max. No. of Pulses
±2,147,483,648 (32-bit counter)
Acceleration/Deceleration Method
Trapezoidal acceleration/deceleration, S-shaped acceleration/deceleration
Position Setting
Absolute/incremental
Backlash Compensation
0 to 65,535 pulses
Control Modes
Direct positioning instructions/memory point instructions
Home Reset Function
4 types (free, low-speed, and two high-speed)
Home Compensation
0 to 65,535 pulses
Occupied Node Number
4
––
1 to 5V
1 to 5V
(impedance 1MΩ)
(impedance 1kΩ)
-5 to 5V
-5 to 5V
(impedance 1MΩ)
(impedance 1kΩ)
-10 to 10V
-10 to 10V
(impedance 1MΩ)
(impedance 1kΩ)
0 to 20mA
0 to 20mA
(impedance 200Ω)
(impedance 400Ω)
4 to 20mA
4 to 20mA
(impedance 200Ω)
(impedance 400Ω)
Max. 200m
Channel 2
Up to 1008 points
400m
Max. 200m x 2 (at 6Mbps)
9
2-phase/1-phase rotary encoder input
(differential input possible)/sensor input
Multiply Selector
1/2/4
Counter Classification
Linear counter, ring counter, frequency counter
Comparator Output
Coincidence comparison output
(applicable to 16-bit/32-bit up counters)
Applicable to 32-bit up/down counters; 8 dogs x 2 cams
(1 cam, 1 output; forward-reverse operation possible)
Programmable Cam Switch
8
Occupied Node Number
*1 Selectable
Flex Network I/O Circuit Diagrams
FN-X16TS41*1
FN-XY08TS41*1
FN-Y08RL41*3
Input 0
*2
Set by rotary switch
Offset/Gain
Setting
Calibration function Set upper
and lower limits of each
range by switch
Accuracy
Isolation
Method
Input 0
Internal
circuit
Internal
circuit
Output 7
FN-XY16SK41*1
OV
+24V
VV+
COM
*2 INPUT
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
COM1
INPUT *4
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Internal
circuit
Conversion
Timing
Continual conversion
of all channels (not selectable)
Occupied
Node Number
Input 0
R
Internal
circuit
Input 15
R
COM2
*2
L
INPUT *4
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Photocoupler
isolation
(between output
terminal and
internal circuit)
Simple average, moving
average Delete max./min.
values of sample data
*1 The input section shows the wiring diagram with the sink output type.
*2
The dotted box shows the wiring diagram with the source output type.
Input 16
R
Internal
circuit
Input 31
L
R
Input 0
R
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
OUTPUT
FG
OP amp
Model numbers ending in "41" comply
with the following standards:
L
L
R
V+
AG
Input 0
R
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
OUTPUT
Internal
circuit
Input 15
Output 0
Output 15
R
Voltage
input unit
FG
Analog
GND
(b) Current output
D/A
converter
I+
Low pass filter
AG
FG
Shield
Output 15
A/D converter
(b) Current input
Current
output unit
Input 15
Output 0
D/A
converter
Low pass filter Analog switch
200Ω
International Safety Standards
Internal
circuit
Output Section Circuit Diagram (FN-DA04AH11)
V+
AG
Shield
OV
+24V
VV+
COM
INPUT
*2
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
(a) Voltage output
(a) Voltage input
Voltage
output unit
FN-XY16SC41*1
*3
The COM power supply can be changed according to the relay specifications.
*4 When using IN0 to IN15, use COM1 as the input common. When using IN16 to IN31, use COM2 as the input common.
Input Section Circuit Diagram (FN-AD04AH11)
4
*2 Digital input for detecting signals from relay contacts, pushbuttons, switches,
or other mechanical contact switching devices.
Internal
circuit
Input 7
Output 7
FN-X32TS41*1
FN-Y16SC41
0.3% / FS(25˚C)
0.5% / FS(0~55˚C)
Postconversion
Processing
Output 0
Internal
circuit
Input 15
Output 15
Photocoupler
isolation
(between input
terminal and
internal circuit)
FN-Y16SK41
Input 7
Output 0
Output 0
Input/
Output
Range
Selection
*1 IEC61131-2 (JIS B 3501) compliant
When vibration is NOT continuous: 10Hz to 57Hz, 0.075mm, 57Hz to 150Hz, 9.8m/s2
When vibration is continuous: 10Hz to 57Hz, 0.035mm, 57Hz to 150Hz, 4.9m/s2
X, Y, Z directions for 10 times (90min).
High-speed of 6Mbps/12Mbps
Channel 1
32-bit up counter x 1, 200kHz/50kHz selectable, ±2,147,483,648
32-bit up/down counter x 1, 200kHz/50kHz selectable, ±2,147,483,648
Input Method
1MΩ
Max. 200m
Specification
16-bit up counter x 2, 10kHz/1kHz selectable, 0 to 65,535
Counter Classifications
and Counting Ranges*1
*2
1A at AC240V (resistive
Occupied Node Number
1
Input 0
(common for sink/
source types)
Type 1*2
––
Output Terminal Allowable
Voltage Range
Control Axes
*2
Min. DC15V
Output Terminal
Rated Voltage
Input/Output
Resolution
Output/Input
Channels
Input ON Voltage
Input
Delay
Output
––
8 points
(common for sink/
source types)
Input Type
Specification
Free of corrosive gases
Input/Output
Structural
Atmosphere
Vibration Resistance
Performance Specifications
Item
Max. Positioning Memory
Under 7.2W
AC1500V at 10mA for 1 minute
(between charging and non-charging parts)
Ambient Operating Temperature
Environmental
Electrical
Unit Rated Voltage
Performance Specifications
FN-XY16SK41
16-point
Sink/Source Input
High-speed Counter
Positioning Unit
16-point Sink/Source Input,
16-point Sink Transistor Output
Analog
GND
Analog switch
OP amp
A/D converter
I+
AG
Current
input unit
FG
10
Accessories
Software
Logic Program Development
GLCCNT-ED01W-V
**
Screen Editor
Data Collection Software
Web Operation Software
PSW-ED01-V
GW-CJ01-V
for Windows
GPW-PB01W-V
**
*Data transfer cable sold separately.
*Available Soon
For Tool Connector
**
**
*For GLC2300T/L, an add-on kit for GP-PRO/PBIII V5.05 and Pro-Control Editor V3.0 is required.
For Serial Interface
For CF Card Interface
CF Card (16M)
GP077-CF20
Data Transfer
Cable
GPW-CB02
CF Card (32M)
RS-232 Cable (5m)
RS-422 Cable (5m)
For Multi-link Cable
RS-442 Connector
Terminal Block Adapter
GP410-IS00-O
GP230-IS11-O
GP230-IS12-O
GP070-CN10-O
GP077-CF30
For Printer Interface
Printer Cable
PSM-PRCB00
For
For
GLC2600T GLC2400T
For Expansion Unit
Interface 1
CPU I/F Cable
for Mitsubishi PLC A Series
CPU I/F Cable
for Mitsubishi PLC FX Series
RS-422 cable
for Two-port AdapterII
Two-port AdapterII for
Mitsubishi PLC A. QnA. FX Series
CF Card Adaptor
CF Card Front Maintenance
GP430-IP10-O
GP430-IP11-O
GP070-MDCB11
GP070-MD11
GP077-CFAD10
GP077-CFFM10
For Expansion Unit
Interface 2
For Flex Network I/0
Maintenance Option
PROFIBUS Slave Unit*
Installation Fastener
CA1-PFSALL-21
FN-CABLE
2010-31-MS (10m)
CA1-DNSALL-21
CANopen Slave Unit*
FN-CABLE
2050-31-MS (50m)
CA1-COSALL-21
MPI Adapter
*Available Soon
GP070-AT01
Flex Network
Communication Cable
DeviceNet Slave Unit*
GP070-MPI-41
For
GLC2600T
Video-mix Unit
GP2000-VM41
For
FN-CABLE
2200-31-MS (200m)
Connector Cover
Backlight
Rubber Gasket
PS600-BU00-MS
GP570-WP10-MS
For
PS400-BU00-MS
For
GLC2600T
PS400-WP00-MS
For
GLC2400T
PS300-BU00-MS
GLC2600T
For
PS-BH00
For
GLC2600T
Screw Lock Terminal Block
GPL-AXCN01
GLC2400T
For
GLC2300L/T
GLC2300-FNCN01
Caution: Before operating any of these products, please be sure to read all related manuals thoroughly.
For printing purposes, the colors in this catalog may differ from those of the actual unit.
Actual user screens may differ from the screens shown here.
LCD screens may exhibit minute grid-points (light and dark) on the Display Panel surface. Also, "Contouring" - where some parts of the screen are
brighter than others, producing a wavelike pattern - may occasionally occur. Both are normal for an LCD display and are not defects.
Microsoft® Excel, Access are registered trademarks of Microsoft Corporation.
All product names used in this catalog are the registered trademarks of their respective companies.
All information contained in this catalog is subject to change without notice.
GLC2600T
For
PS300-WP00-MS
GLC2300L
For
Screen Protection Sheet
(5 sheets/set)
PSL-DF00
For
GLC2600T
For
GLC2400T
PS400-DF00 GLC2400T
For
PS300-DF00 GLC2300L/T
GLC2300L/T
For
www.pro-face.com
Worldwide Contacts:
General Info: [email protected]
Technical Info: [email protected]
2001 Digital Electronics Corporation All Rights Reserved.
Global Head Office
Taiwan
France
Scandinavia
Digital Electronics Corporation
8-2-52 Nanko-higashi
Suminoe-ku, Osaka 559-0031
JAPAN
Tel: +81-(0)6-6613-3116
Fax: +81-(0)6-6613-5888
http://www.pro-face.com
[email protected]
Pro-face Taiwan Co., Ltd.
2F, No. 69 Fushing North Road
Taipei 105
TAIWAN R.O.C.
Tel: +886-(0)2-2772-5208
Fax: +886-(0)2-8773-7892
http://www.proface.com.tw
[email protected]
Pro-face France S.A.S.
Le Vinci
1, rue Henri Becquerel
77290 Mitry-Mory
FRANCE
Tel: +33 (0)1 60 21 22 91
Fax: +33 (0)1 60 21 22 92
http://www.proface.com
[email protected]
Pro-face HMI Scandinavia
Danmarksvej 30 L1
8660 Skanderborg
DENMARK
Tel: +45 70 22 0122
Fax: +45 70 22 0133
http://www.proface.com
[email protected]
China
North/South America
Pro-face China Representative Office
3606C, Southern Security Tower
No. 580, Nanjing Road West
Shanghai 200041
P. R. CHINA
Tel: +86-(0)21-5234-1646
Fax: +86-(0)21-5234-1649
http://www.proface.com.cn
Pro-face America, Inc./ Xycom
750 North Maple Road
Saline, MI 48176
U.S.A.
Tel: +1-734-429-4971
Fax: +1-734-429-1010
http://www.profaceamerica.com
[email protected]
[email protected]
European Head Office
South Korea
Pro-face Korea Co., Ltd.
Room #701, Jaeyoung Building
678-10 Deungchon-dong
Kangseo-ku, Seoul 157-030
SOUTH KOREA
Tel: +82-(0)2-658-6835
Fax: +82-(0)2-3664-6839
http://www.proface.co.kr
[email protected]
Pro-face HMI B.V.
Amsteldijk 166
1079 LH Amsterdam
THE NETHERLANDS
Tel: +31 (0)20 6464 134
Fax: +31 (0)20 6464 358
http://www.proface.com
[email protected]
United Kingdom
Germany
Pro-face Deutschland GmbH
Albertus-Magnus-Straße 11
42719 Solingen
GERMANY
Tel: +49 (0)212 258 260
Fax: +49 (0)212 258 2640
http://www.pro-face.de
[email protected]
Pro-face UK, Ltd.
The Venture Centre,
The Science Park,
Coventry CV4 7EZ
ENGLAND
Tel: +44 (0)2476 692363
Fax: +44 (0)2476 692365
http://www.profaceuk.com
[email protected]
Italy
Pro-face Italia S.p.A.
Via Carcano 44
20033 Desio (MI)
ITALY
Tel: +39 0362 33 71 63
Fax: +39 0362 30 77 25
http://www.proface.com
[email protected]
NP011117-GLC2000-01E16

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project