Pure Digital | VX4600 | Technical information | Pure Digital VX4600 Technical information

1.800.565.5911
Boating
Supplies
ELECTRONICS
Boating
Supplies
Boating
Supplies
Boating
Supplies
info@CargoEast.ca | P: (204) 956.0771 | F: (204) 957.5886 | #3 276 Marion St. Winnipeg, MB R2H 0T7
PAGE 1
ELECTRONICS
Instruments
153
Gauges
156 - 159
Fuel Metering / Senders
160 - 161
Furuno
163 - 169
Maretron
171 - 175
Depth Sounders
175 - 176
Charting
C-Map
177 - 178
Stereos & Speakers
Fusion
180 - 182
Jensen
183 - 184
Hailers/Intercoms
184 - 185
VHF Radios
188 - 189
CB Radios
188
Antennas
191 - 198
Antenna Accessories
199 - 200
Antenna Mounts
200 - 202
TV / Satellite Radio Antennas
203
Radar Mounts
204 - 206
VHF Radios
Antennas & Mounting
Wind Instruments
207 - 208
Meters
209 - 212
Chargers & Inverters
Fuel Cells / Battery Monitors
212 - 213
Battery Chargers
213 - 217
Inverters
217 - 219
Inverter/Chargers
221 - 228
Generators
228
Isolators, Integrators & Separators
229
Inverter Accessories
230
Corrosion Control Products
230 - 231
TACHOMETERS
FAR 32805
~
FAR 32840
FAR 33040
7000 RPM Universal outboard with LCD hour meter
4000 RPM Mechanical diesel take-off & var-ratio alt
~
FAR 32841
FAR 32807
FAR 33041
FAR 33007
4000 RPM Diesel mag pickup with LCD hour meter
Twin gas in-boards, I/O’s and most diesels (*See note 1)
FAR 32812
FAR 33010
80 MPH (*See note 4)
~
~
~
Metric 10 Bar (*See note 2)
FAR 12821
FAR 12860
FAR 13010
~
10 - 16 Volts D.C. (12 volt system)
20 - 32 Volts D.C. (24 volt system)
60 - 0 - 60 Amps
AMMETER
VOLT METERS
FAR 12822
~
FAR 13011
FAR 12812
~
40º - 120ºC. (*See note 2)
100º - 250ºF
FAR 13004
WATER TEMPERATURE GAUGES
FAR 12803
FAR 12845
FAR 13002
80 PSI
100 PSI
OIL PRESSURE GAUGES
Empty - 1/2 - Full
FAR 12801
~
~
FAR 13001
FAR 32810
FAR 33009
55 MPH (*See note 4)
60 MPH (*See note 4)
FUEL LEVEL GAUGE
FAR 32808
FAR 33008
35 MPH (*See note 4)
SPEEDOMETERS
SYCHRONIZERS
FAR 32842
~
FAR 33003
4000 RPM Diesel mag pickup
7000 RPM Universal outboards
~
FAR 32804
FAR 33004
FAR 33005
EURO
CORAL
~
~
FAR 15121
~
FAR 15112
~
~
FAR 15103
FAR 15101
FAR SE9424
~
FAR 35122
FAR 35108
~
~
~
~
~
~
FAR 35105
FAR 35104
EURO
BEIGE S.S.
FAR 12912
~
FAR 12911
FAR 12929
FAR 12904
FAR 12926
~
FAR 12902
FAR 12901
FAR 32910
~
FAR 32909
FAR 32908
FAR 32907
FAR 32941
~
FAR 32942
FAR 32940
FAR 32932
FAR 32905
FAR 32904
EURO WHITE
• Perimeter lighted black face
• Blue & white graphics
• Black aluminum raised bezels
• Contoured white pointer
• Flat glass lens
Coral
6000 RPM Universal outboards with LCD hour meter
6000 RPM Gas in-boards and I/O’s
TYPE OF GAUGE
Faria marine instruments are manufactured and assembled
entirely in the U.S.A. Faria offers the industry’s only transferable
limited LIFETIME WARRANTY. Speedometers, synchronizers
and tachometers are 4” and require a 3-3/8” hole. All other Faria
gauges have a 2-1/2” bezel and require a 2-1/16” hole.
~
~
FAR 13705
~
FAR 13704
~
~
FAR 13702
FAR 13701
~
FAR 33704
~
~
FAR 33701
~
~
~
~
~
FAR 33718
FAR 33710
CHESAPEAKE
S.S. BLACK
Euro
~
~
FAR 13805
~
FAR 13804
~
~
FAR 13802
FAR 13801
~
~
FAR 33811
~
FAR 33801
~
~
~
~
FAR 33832
FAR 33817
FAR 33807
CHESAPEAKE
S.S. WHITE
• Perimeter lighted black face
• Bold white graphics
• Contoured white pointer
• Flat glass lens
FAR 13149
~
FAR 13120
~
FAR 13110
~
~
FAR 13102
FAR 13101
FAR 33113
~
FAR 33112
FAR 33122
~
~
~
~
~
~
FAR 33104
FAR 33103
DRESS WHITE
FAR 14631
~
FAR 14605
~
FAR 14604
~
~
FAR 14602
FAR 14601
FAR 34619
FAR 34611
~
~
~
~
FAR 34618
FAR 34642
~
~
FAR 34617
FAR 34607
PROFESSIONAL
RED
• Perimeter lighted beige dial
• Bold black graphics
• Polished stainless steel bezel
• Domed glass lens
Euro Beige
Stainless Steel
156
Instruments
FAR 12819
~
FAR 12827
FAR 12826
FAR 12829
FAR 13016
FAR 13015
FAR 13018
OMC Sea drives & OMC stern drives (Except Cobra)
OMC Cobra & Volvo SX stern drives
Note 1: Not for flywheel sensors
Note 2: Use with European/International sending units
Note 3: With installation kit
Note 4: Requires pitot tube on boat
Note 5: Use with standard marine sending unit
Note 6: Non-illuminated gauge
25 Bar/350PSI Metric
TRANSMISSION PRESSURE
Requires sender
RUDDER ANGLE INDICATOR
Empty - Full. Potable water (*See note 5)
~
FAR 12833
FAR 12830
~
~
~
~
~
FAR 15129
~
FAR 15127
FAR 15128
~
~
~
FAR 15124
EURO
BEIGE S.S.
~
FAR 12931
FAR 12920
FAR 12922
FAR 12903
FAR 12917
~
FAR 12915
FAR 12916
FAR 12933
FAR 12910
FAR 12923
FAR 12913
EURO WHITE
• Perimeter lighted white dial
• Blue & white graphics
• Polished stainless steel bezel
• Contoured black pointer
• Domed glass lens
Chesapeake White
Stainless Steel
~
~
~
~
FAR 13712
FAR 13708
FAR 13734
FAR 13709
FAR 13707
~
FAR 13706
~
FAR 13713
CHESAPEAKE
S.S. BLACK
FAR KTF002
FAR KTF004
FAR KTF001
FAR KTF003
White
Black
Speedometer w/pitot,
Tachometer, Fuel, Volt
White
Black
Outboards (4 piece)
FAR 14626
~
FAR 14626
~
FAR 14612
FAR 14608
FAR 14630
FAR 14609
FAR 14607
FAR 14623
~
FAR 14652
FAR 14613
PROFESSIONAL
RED
Speedometer w/pitot, Tachometer, Fuel,
Volt, Temperature, Oil & Pressure
~
~
~
~
~
~
~
~
FAR 13122
~
~
FAR 13152
FAR 13121
DRESS WHITE
• Perimeter lighted black dial
• Red and white graphics
• Black aluminum bezel
• Tear drop white pointer
• Flat glass lens
Professional Red
Inboards (6 piece)
~
~
~
~
FAR 13812
FAR 13808
~
FAR 13809
FAR 13807
~
FAR 13806
~
FAR 13813
CHESAPEAKE
S.S. WHITE
• Perimeter lighted white dial
• Black graphics
• White aluminum bezel
• Contoured black pointer
• Flat glass lens
Dress White
Complete set of fog free Chesapeake series
stainless steel
in white or black
See Colour Insert For More Details
► gauges
NOTE:
Faria Boxed Sets
~
FAR 13024
~
~
~
2 Bar Metric For water cooled outboard motors (*See note 2)
TANK LEVEL
FAR 12810
~
30 PSI For water cooled outboard motors (*See note 3)
WATER PRESSURE GAUGE KITS
FAR 12828
FAR 13017
Mercury & Mariner O/B’s & Mercruiser stern drives.
OMC O/B’s Johnson / Evinrude & Suzuki
TRIM GAUGES
Displays energy remaining for12 volt batteries
BATTERY CONDITION INDICATOR
60º - 220ºF. For water cooled outboards. Comes with sending unit.
CYLINDER HEAD TEMPERATURE GAUGE KIT
CLOCK
~
FAR 12825
FAR 13014
Quartz analog clock
FAR 13012
FAR 12824
FAR 13013
10,000 hours. Elapsed time in hours & tenths of hours. (*See note 6)
HOURMETER
EURO
CORAL
• Perimeter lighted black dial
• Blue & white graphics
• Polished stainless steel bezel
• Contoured white pointer
• Domed glass lens
Chesapeake Black
Stainless Steel
TYPE OF GAUGE
• Perimeter lighted white dial
• Bold black graphics
• Black aluminum bezel
• Contoured black pointer
• Flat glass lens
Euro White
Instruments
157
158
Instruments
Faria 4-In-One Combo Gauge
Faria Accessories
4” Combination gauge includes fuel, volts, oil
pressure and engine temperature analog readings.
White face with a chrome bezel.
Rudder Angle Indicator Senders
FAR 33851
Chesapeake S/S white
Faria Euro Tachometer w/ System Check
• 4” Diameter
• 7000 RPM
• 4 system check indicators: no oil, low oil,
temperature, engine check
FAR 32850
Single station, Standard or floating ground
Dual station, Standard or floating ground
Lighting Boots
Change the colour of your Faria instrument lighting.
FAR 90807
Blue tint 4/pkg
FAR 90808
Green tint 4/pkg
FAR 90809
Red tint 4/pkg
Euro, black
Replacement Bulbs
SPE 161 Fits all 2" gauges, black/gray dials except water Faria Boxed Sets
Complete set of fog free Chesapeake
stainless steel gauges in white or black.
Inboards (6 piece)
• Speedometer w/ pitot, Tachometer, Fuel,
Volt, Temperature, Oil pressure
FAR KTF001
White
FAR KTF003
Black
• Outboards (4 piece)
• Speedometer w/ pitot, Tachometer, Fuel, Volt
FAR KTF002
White
FAR KTF004
Black
► Also See:
FAR 90530
FAR 90531
Fuel Senders pg 519
pressure, vacuum boost, vacuum & 2" operator warning system.
SPE 658 Fits all 2" gauges, white dials except water pressure, vacuum boost, vacuum & 2" operator warning system.
SPE 194 Fits all tachometers & Speedometers except competition series.
24 Volt Adapters
Adapts 12V Faria to 24V systems.
FAR 90303
FAR 90306
FAR 90310
FAR 90314
All tachometers and synchronizers
All clocks
All Mercury, Mariner trim gauges
Fuel level, tank level, trim for OMC
(except Cobra). Also, do not use with Professional Red series.
Misc Items
Faria Digital Depth Sounder
w/ Dual Temperature
• Displays in feet or meters
• Shallow and deep water alarms
• Alarms are audio & visual
• Programmable keel offset
• Transom mounted transducer included
• Complete with air & water temperature sensors
FAR 13752
Chesapeake, S/S black
Parts:
FAR SN 2011A
Transom mount depth transducer
► Also See:
Faria Depth Sounders pg 176
FAR 90801
Bulb socket only
Moeller Dash Mount Electronic Fuel Gauge
• All electrical senders are calibrated to 33 to
240 OHMs
• 100% inspected during manufacturing
MOE 035727-10
Moeller Conversion Capsules
Direct site mechanical read capsule.
MOE 035759-10
Conversion capsule from mechanical to
electrical dash mounted gauge.
MOE 035760-10
Instruments
VDO Oceanline Series Instruments
VDO Oceanline Series Instruments
All VDO Ocean Line instruments are hermetically sealed,
corrosion-free and fitted with anti-fog double lenses in shockresistant plastic. Resistance to sea water is guaranteed. The domed
design ensures that water flows off quickly when instruments are
mounted horizontally. The dials are back lit using transmitted light
technology. Front panels and bezels can be interchanged.
3-3/8" Diameter Gauges
2-1/6" (52mm) Diameter Gauges
• Pressure: electrical
• Depth: 2.59"
VDO 02-124-126
VDO 350-110-4
VDO 02-124-166
VDO 02-124-566
VDO 02-124-168
VDO 02-124-568
72 PSI 12V, Oil
80 PSI 24V, Oil
150 PSI 12V, Oil
150 PSI 24V, Oil
400 PSI 12V, Transmission
400 PSI 24V, Transmission
• Rudder Angle
• 12V
VDO 03-211-412
VDO 440-003
Position indicator
Sender
• Voltmeter
• 8-16 Volts 12V system, 16-32 Volts
24V system
• Depth: 2.59"
VDO 332-1101
12V
VDO 02-410-906
24V
• Water Temperature
• Electrical
• 250°F/120°C
VDO 02-321-728
• Ammeter
VDO 1901101
• Fuel Gauge
• 10-180ohm
VDO 301-1103
• Clock
• 12/24volt
VDO 3701101
• Diesel tachometer gauges with LCD hour
meter, electrical, 85mm (3-3/8") Dia.
VDO 02-012-126
VDO 02-012-150
3,000 RPM
4,000 RPM
Gauge Parts:
VDO 600-807D
VDO 600-822
VDO 850-040
VDO 850-041
24 volt bulb
24 volt red mini wedge bulb
Bezel 85mm, chrome
Bezel 52mm, chrome
Spare Parts:
VDO 600-001
VDO 600-003
VDO 600-513
VDO 600-515
Square bezel & gasket 2-1/16"
Square bezel & gasket 4"
4" Lens kit, inner & outer
2-1/16" Lens kit, inner & outer
159
160
Fuel Metering / Senders
Faria Digital Fuel Management Systems
Marine Works Temperature Switch
For gas engines only
• Displays gas remaining
• Monitors fuel flow from .5 to 34 gallons per hour
or 2.0 to 129 litres per hour
• Trip fuel log and total fuel log displayed in
gallons or litres
• Includes a selectable low fuel audible alarm
• Back light
• Splash resistant
• Size - 2-1/16
• Voltage: 8-16.5 V.D.C
• Display- 3 character L.C.D
Used with light. Set at 210oF. 3/8" NPT.
FAR FFM001
FAR FFM009
MWK 25101
200°F trip
Marine Works
Water Temperature Senders
Water temperature sender operates Faria,
Stewart-Warner and Teleflex gauges.
Single Station
MWK 26611
MWK 26621
MWK 26631
Black dial & bezel
Euro White
1/4" NPT 240°F
3/8" NPT 240°F
1/2" NPT 240°F
Dual Station
MWK 26641
MWK 26651
1/8" NPT 240°F
1/4" NPT 240°F
VDO Water Temperature Senders
Universal senders use a tapered thread and do not need
Teflon tape or pipe sealant.
Single Station
Floscan Cruisemaster Gasoline Flow Meters
Floscan systems are available for virtually all
types of engines and applications (diesel or gas,
single or twin engine).
Engine (s)
Litres/Hour
O/B HP
FLO 55160-20B-1
Gas, Single
0-160
150 HP
FLO 55160-20B-2*
Gas, Twin
0-160
150 HP
*Request Item
Sierra Temperature Senders
SIE 18-5896
SIE 18-5897
SIE 18-5898
1/8” 240°F
3/8” 240°F
1/2” Dual 240°F
3/8"-18 NPT 250°F/120°C
1/4" NPT 250°F/120°C
3/8" NPT 250°F/120°C
1/2" NPT 250°F/120°C
1/4" NPT 300°F/150°C
Dual Station
The series 5500 Cruisemaster flow meters fit
gasoline inboard, I/O and outboard engines.
• Self contained totalizer with permanent LCD display records
fuel consumption up to 9999.9 litres.
• Resettable or non-resettable operating modes.
• Maintenance free fuel flow sensor.
• Microprocessor based electronics with user adjustable
calibration for superior accuracy.
• Twin engine models use one gauge and show individual flow
rates to each engine by an external switch with the totalizer
recording the combined fuel consumption.
• Bezel diameter: 3-3/8". Panel mounted into a 3-1/16" opening.
Series 5500 for inboards/stern drives up to 350 H.P. and outboard's
below 150 HP. Fits all EFI engines except those with return line to
the tank.
Part #
VDO 323-421
VDO 323-477
VDO 323-479
VDO 323-478
VDO 323-485
VDO 325-007
VDO 325-002
VDO 325-010
3/8" NPT 250°F/120°C
1/4" NPT 250°F/120°C
1/2" NPT 250°F/120°C
Universal Kits
Includes 1/8"-27 NPT sender, 1/4"-18 bushing, 3/8"-18
bushing, 1/2"-14 bushing and 1/4" spade terminal.
VDO 323-900
VDO 323-905
250°F/120°C
300°F/150°C
Faria Water Temperature Senders
Single station or dual station for use with most
marine water temperature gauges.
FAR 90401
FAR 90402
FAR 90403
FAR 90404
FAR 90406
FAR 90412
FAR 90601
FAR 90602
1/8" NPT, water temp sender
1/4" NPTF, temperature sender
3/8" NPTF, water/oil/temp sender
1/2" NPTF, temperature sender
1/8" NPT, dual sender
1/8" NPTF Euro. single standard ground
Sender bushing kit (1/4" & 3/8")
Sender bushing kit (1/2" & 5/8")
Faria Cylinder Head Temperature Sender:
Works with all models
FAR 90405
Sender
Senders
Faria Diesel Tachometer Sender
Faria Oil Pressure Senders
Generates signal by coupling to mechanical
take-off on engine. Complete with swivel
adaptor assembly. One sender will operate two
tachometers.
American (0-80 P.S.I.)
FAR 90901
Sierra Oil Pressure Sender
• Single station
• 1/8"-27 thread size
• 10-32 stud terminal
• 0-80 PSI
SIE 18-5899
Marine Works Oil Pressure Switch
Oil switch. Used for electric fuel pump shut
off. Set at 6 PSI. Used by Mercury Marine and
Volvo. (1/8" NPT).
MWK 22900
FAR 90512
FAR 90511
Single station, standard ground
Dual station, standard ground
European
FAR 90515
FAR 90526
1/8" NPTF 5 BAR single standard ground
1/8" NPTF 10 BAR/150 PSI single standard ground
VDO Oil Pressure Switches
Heavy duty switches compatible with a wide
variety of fluids, making them ideal for most
engine system applications.
Normally closed-Single circuit-2 TerminalInsulated ground
VDO 230-504
4 PSI
Dual circuit-Normally open-Normally closedInsulated ground
VDO Oil Pressure Senders
VDO 230-604
Universal senders use a tapered thread and do not need
Teflon tape or pipe sealant.
Faria Pitot Tube Assembly Kits
Single Station
VDO 360-406
VDO 360-410
VDO 360-430
VDO 360-431
1/8" 400 PSI, single
1/8" 80 PSI, single
1/8" 150 PSI, single
1/8" 350PSI, single
Dual Station
VDO 362-001
VDO 362-002
VDO 362-004
1/8" 80 PSI, dual
1/8" 150 PSI, dual
1/8" 400 PSI, dual
Universal Kits
Includes 1/8"-27 NPT sender, 1/4"-18 bushing, 3/8"-18
bushing and 1/2"-14 bushing.
VDO 360-900
VDO 360-905
80 PSI
150 PSI
Marine Works Oil Pressure Senders
Oil pressure sender operates Faria,
Stewart-Warner and Teleflex gauges.
Range: 0-80 PSl (1/8" NPT).
MWK 24891
Dual station
Range: 0-100 PSI (1/8" NPT)
MWK 24301
Single station
161
4 PSI
Complete transom mount speedometer
pick-up with escutcheon plate and
mounting hardware (less tubing) for all
marine speedometers through 80 MPH.
Rugged, heavy-duty design.
FAR 91109
Same as 91109 but includes 20' of tubing
FAR 91106
Cover Plate
Black finish cover plate for pitot tubing or
cable entry.
FAR 91105
Shields Speedo Tubing
• Black vinyl tubing for pitot hook-up.
• Dimensions: 1/8" I.D. x 1/4" O.D
HOS 151-0185
HOS 151-1/8"
1/8" x 25'
Per foot
Sea-Dog Pitot Tube Shield
Made from 304 stainless steel. Designed to guard
cables and electrical wiring on items such as depth
sounders, speedometers and coaxial cables when
they are passing through the
transom.
SED 331310-1
Beyond Virtual Reality!
Experience a world of 3D navigation that transports you beyond any conventional Chart Plotter, Radar, or Fish Finder you’ve
encountered. Tremendously intuitive operation, lightning fast performance, and the ultimate in situational awareness are finally
here. Journey beyond virtual reality with NavNet 3D!
Now optionally available on NavNet 3D!
www.FurunoUSA.com
Furuno
163
Furuno GPS Receiver
Furuno Fish Finders
• Dual frequency - 50 and 200 kHz
• Targets presented in up to 4 grey tones
• Picture resolution of 240(H) x 320(V)
pixels
• 300 Watt RMS (2400 P-P) output power
• Seven depth scales, from 0-10 to 0-640’
• Depth offset to 1,500’, maximum depth scale of 3,000’
• Automatic or manual depth range and gain adjustment
• A-scope for rapid fish detection and species identification
• White line mode for enhanced bottom fish detection
• Audible and visual, temp, speed, fish or bottom alarm
• TLL output sends position, temp and depth to Furuno TLL
capable plotters
• Speed and temperature input via optional sensor or NMEA
0183 data
• Mini navigator allows storage of up to 12 way points, with
capability to navigate back to these points
• Two NMEA0183 ports - one bidirectional and one "listen-only"
• Transducer sold separately
FUR LS4100
FUR LS6100
5” monochrome display
6” monochrome display
Furuno Colour Fish Finders
• Bright, 5.6" or 8.4" waterproof colour LCD
gives excellent readability even in broad
daylight
• Dual-frequency 50/200 kHz
• New DSP filter makes the picture clearer and
easier to discriminate between bait fish and
larger target species
• 8/16/64 colour echo presentations
• Hands free adjustments of gain, STC & output power through
digital filtering 8 range scales to 2,500 feet
• Selectable automatic cruising or fishing modes to suit your
style of boating
• Automatic function for detecting fish and bottom in both
shallow and deep water
• User-programmable nav data display provides analog and
digital nav data
• Alarms: bottom, fish (bottom lock and normal), speed, water
temperature and arrival (speed, arrival and water temperature
alarms require appropriate sensor)
• White line feature helps discriminate fish lying near the bottom
• Fast transmission rate of 3,000 PRR (pulse repetition rate) per
second for enhanced shallow water detection
• Transducer sold separately
FUR FCV620
FUR FCV585
6” colour display (600W)
8.4” colour display (600W/1Kw)
• Improved accuracy with built-in WAAS
receiver
• Multiple display modes to suit a variety
of navigational requirements
• Up to 999 way points, 50 routes and
1,000 track points
• One-touch way point entry
• Customizable NavData screens
• Track back feature stores way points at user defined intervals
for early trace-back cruise
• Way point & route upload/download through RS-232C port
• Includes GP017 GPS antenna & 10m cable
FUR GP32
4.5” monochrome display
Furuno GPS/Chart Plotter
• High-performance GPS/WAAS receiver
sunlight viewable 7" TFT bright colour
LCD (16:9 aspect ratio)
• Enhanced chart redraw speed
• Display modes: course plot, nav data,
steering, highway
• User-friendly interface and operation with rotary encoder and
soft keys
• Includes GPA017 GPS/WAAS antenna with 10M cable
• Dual SD card slots for memory and chart cards
• Uses C-MAP NT MAX SD charts
FUR GP7000/NT
7” colour display
Furuno GPS/Chart Plotter/Fish Finder
All of the features above, with the addition of a fish finder.
The fish finder function graphically depicts underwater conditions,
such as fish schools and seabed. Operating frequency is 50 and 200
kHz with high transmission output power of 600 watts or 1,000
watts. The information can be displayed together with the course
plot mode in split screen or by itself on a full screen.
Transducer sold separately
FUR GP7000F/NT
► Also See:
7” colour display
Transducers pg 169
164
Furuno
Furuno NavNetVX2
GPS/Chart Plotters
Chart Plotter Features:
• 7" or 10.4" sunlight viewable VGA (480
x 640) display
• Front loading card port
• Simplified installation with new network
wizard set-up
• Cursor L/L position display
• On-screen display of vessel position, heading, etc.
• Vessel position display in L/L or Loran-C TD's
• North-up, course-up or automatic course-up display modes
• Plotter, nav data, steering director or highway display modes
• Up to 8,000 points for ship's track and marks, 999 way points,
35 quick points, 1 MOB, 200 planned routes (max. 35 Way
points/route) and 1 quick route
• Add multiple displays connecting to Navnet interface
• Add network sounder connecting to Navnet interface
• MOB key stroke stores vessel position and time
• Plotter range scales from 0.14 To 6,144 nautical miles
• 16 Different mark symbols may be used
• Way point entry by L/L position or TD position or target range
and bearing
• Plotter position interval set by time or distance travelled
• Full functioning infrared remote control
• Dual SD card slots for memory and chart cards
• Uses C-MAP NT MAX SD charts
GPS Features:
• Integral parallel tracking GPS/WAAS receiver w/ 10m cable
• Up to 900 knot tracking velocity
• 20 seconds for first position fix
• GPS position accuracy of approximately 10 meters, 95% of the
time with S/A off
• WAAS position accuracy of approximately 3 meters, 95% of
the time with S/A off
• Includes BBWGPS & 10m cable
FUR GP1720C-NT 7” colour display
FUR GP1920C-NT 10.4” colour display
MaxSea Marine Software
MaxSea TimeZero advances PC Chart Plotting to the next level,
allowing you to navigate in ways never before possible. An all-new
graphics engine, updated tool sets and included raster and vector
charts for the entire U.S. coastline make MaxSea
Time Zero the most powerful PC navigation
package you can own.
TZ-Navigator
With TimeZero Navigator, MaxSea offers an
entry-level system developed for the US market.
You can connect your GPS and autopilot, download/overlay
weather, and perform advanced planning. You can begin using
Navigator right out of the box with free, detailed raster and vector
charts for the U.S. that are included on DVDs.
• Full-time 3D environment
• Ergonomics and performance
• MapMedia MM3D vector and raster charts
• Satellite Photo Fusion
• Online support
FUR TZ-NAVIGATOR*
*Request Item
Furuno 6” LCD Radar
(Stand Alone)
• Waterproof, 6" silver bright monochrome
LCD display
• 14 range scales from 0.125 to 24 nm
• Low power consumption in watchman
mode - only 8 W
• Dual bandwidth IF amplifier: broad band
for high fidelity in short ranges, narrow
band for enhanced detection in long ranges
• Variable antenna speeds with range scales for optimum
performance on all ranges
• Cursor position can be read in L/L (GPS navigator is required)
• Way point lollipop on-screen to aid in vessel navigation (GPS
navigator is required)
• Programmable navigation data repeater feature
• Zoom in to a specific area
• Reverse video feature for effective use at night
• Guard zone alarm (US Patent No.5032842)
• 10 m cable
FUR 1623
2.2kW 16NM, 15” radome included
Furuno 7” LCD Radar
(Stand Alone)
• Waterproof, 7" silver bright
monochrome LCD display
• 14 range scales from 0.125 to 24 nm
• Low power consumption in Watchman
mode - only 8 W
• Dual bandwidth IF amplifier: broad
band for high fidelity in short ranges,
narrow band for long ranges
• Variable antenna speeds with range scales for optimum
performance on all ranges
• Cursor position can be read in L/L (GPS navigator required)
• Way point lollipop on-screen to aid in vessel navigation (GPS
Navigator is required)
• Programmable navigation data repeater feature
• Zoom in to a specific area
• Reverse video feature for effective use at night
• Guard zone alarm (US Patent No.5032842)
• 10 m cable
FUR 1715
2.2kW 24NM, 18” radome included
TZ-Explorer
Includes all of the TZ-Navigator features plus:
• MaxSea TimeZero Weathercaster for sea surface
temperature, altimetry and chlorophyll
• NavNet 3D radar overlay
• NavNet 3D chart license sharing and chart server
• NavNet 3D route and waypoint exchange via network
synchronization
FUR TZ-EXPLORER*
*Request Item
Furuno
Furuno NavNetVX2 Radar/Chart Plotters
• AR-coated, high-brightness display unit
for improved sunlight viewability
• Automatic GST (gain, sea clutter,
tuning) receiver
• Target or echo trails with selectable
time intervals
• Enhanced graphics with 256 colour full
VGA presentations
• Improved screen redraw, scroll refresh, and memory cache
• New quick point L/L direct entry way point
• 100 Target AIS display with I/F module and external AIS RX
• Simplified installation with new network wizard set-up
• Adjustable (in or out) radar guard zone alarm
• Picture off-centering or target zoom mode
• Cursor L/L position display
• Watchman mode activates the radar for safety and security
• On-screen display of vessel position, heading, etc.
• Way point lollipop on-screen, to simplify navigation
• Full functioning infrared remote control
• Radar overlay available with appropriate heading sensor
• Vessel position display in L/L or Loran-C TD's
• North-up, course-up or automatic course-up display modes
• Plotter, nav data, steering director or highway display modes
• Up to 8,000 points for ship's track and marks, 999 way points,
35 quick points, 1 MOB, 200 planned routes (max. 35 Way
points/route) and 1 quick route
• Add multiple displays by connecting to Navnet interface
• Add network sounder by connecting to Navnet interface
• Dual SD card slots for memory and chart cards
• Uses C-MAP NT MAX SD charts
• Sunlight viewable 7” colour VGA (480 x 640) TFT LCD
display
• New radome antenna adjusts antenna rotation speed based on
the range in use, 30rpm in short range and 24rpm in mid/long
ranges
• 10m cable
FUR 1724C/NT
7” colour display, 18” radome
165
Furuno NavNet3D
Multi-Function Displays & Black Box
• True 3D chart architecture
• High resolution satellite photography that can be loaded
• Satellite Photo Fusion adjusts photo transparency according to
depth for complete chart information
• TimeZero technology for instant chart redraw, zooming and
chart handling with no lag time
• Head-up, course-up and north-up modes
• True colour depth shading utilizing bathymetric data
• NavNet 3D ROTOKEY Puts a whole new spin in User Friendly.
• Dedicated scroll pad allows you to pan, shift and search the
chart
• Dedicated ship key automatically brings you back to own ship's
position after exploring the chart
• Unlimited range scales for zooming
• Dedicated 3D key allows you to easily toggle between 2D and 3D
• More than 12,000 ship's track points and over 2,000 way points
• Standard video input and output
• 200 planned routes, with up to 100 way points/routes
• Preloaded tides and currents
• Dual SD card slots for memory and chart cards
• Uses NavNet 3D charts
Furuno NavNet3D Multi-Function Displays
• Colour LCD displays
• True 3D environment for a more instinctive chart presentation
• Satellite photo fusion
FUR MFD 8
FUR MFD 12
8.4” colour display
12.1” colour display
Furuno NavNet3D Black Box
• Sunlight viewable 10.4” colour VGA (640 x 480) TFT LCD
display
FUR 1834C/NT
FUR 1934C/NT
10.4” colour display, 24” radome
10.4” colour display, 3.5’ open array
• Extended Mode feature of Navnet 3D Black Box allows you to
connect two monitors and synch the video, or ‘split’ the two
screens into eight different quarters to display the information
you want to see most
• Display sold separately
FUR MFD BB
166
Furuno
Furuno Ethernet Hub
Furuno GPS/WAAS Receiver
The HUB101 is the centre of your NavNet
3D system, connecting all of your displays
and components together and allowing for
the distribution of information across the
network. NavNet 3D is built on an ethernet
network, allowing you to add as few or as many components as
you desire along with up to ten displays to create your perfect
navigational suite. Power on/off synchronization amongst all of
the NavNet 3D display units can be achieved with the use of the
dedicated ethernet HUB101.
WAAS/GPS receiver antenna makes any
NavNet product capable of receiving WAAS
and GPS information. It delivers accuracy
better then 3 meters by decoding GPS
correction signals from the WAAS (Wide
Area Augmentation System). In addition to its
WAAS capability, the antenna has a compact
12-channel GPS receiver that provides
accurate and reliable position fixing. Simply
connect the antenna to any NavNet display and you can display
WAAS/GPS information on one display or the entire NavNet
network.
• NMEA 0183
• 10m cable
FUR HUB101
Furuno
Navnet 30 VHD Radomes
• Ultra High Definition (UHD) digital
radar offers crystal clear, noise-free
target presentation with automatic
real-time digital signal processing
• Real-time digital auto gain/sea/rain controls to deliver noisefree radar presentation
• Radar antenna rotation speed (24/36/48 rpm) is automatically
shifted to the appropriate pulse length
• Simultaneous scanning technology, providing unsurpassed
target detection. With each sweep of antenna, dual progressive
scan transmissions are sent, received and processed to
display two separate radar ranges on your NavNet 3D display
simultaneously. Each radar presentation acts autonomously,
allowing for manipulation of individual gain and clutter
controls
• Radome incorporates a NMEA 2000 port to which certain
NMEA2000 sensors can be directly connected. Power for
these networked sensors is supplied directly from the radome
itself, allowing for flexible installation of multiple NMEA 2000
sensors without the need to run cables all the way to the main
processor unit
FUR DRS2D
FUR DRS4D
2.2kW 24NM, 18” dome
4kW 36NM, 24” dome
Furuno Navnet 30 VHD Open Array Antennas
• Enhanced detection both in long and
short range by digital radar sensor
• Enhanced auto tuning, auto gain and
anti-clutter controls
• 48 rpm antenna rotation speed for
HSC and river applications
• Adaptive antenna rotation speed according to pulse length
• Accurate radar overlay on both 2D/3D chart presentation with
aid from heading sensors
• True echo trail shows afterglow of moving radar targets
• True colour radar shows density of targets in 16 colour levels
• Radar guard zone and watchman features alert you to potential
danger
• Dual VRM (variable range marker) and dual EBL (electric
bearing line)
• Automatic IP address assignment for true plug and play
installation
FUR DRS4A
FUR DRS6A
4kW 48NM, 3.5’ open array
6kW 64NM, 4’ open array
FUR BBWGPS
Furuno GPS/WAAS Receiver
The GP-330B is a high performance GPS
receiver designed for any type of vessel. This
compact and cost-effective receiver offers
extremely accurate position fixes, within 3
meters with the WAAS mode activated.
The GP330B is capable of data output in NMEA2000 or NMEA
0183 format, making it an ideal GPS sensor for use with NavNet
3D systems. The sensor comes with all of the hardware required for
deck- or mast-mounting solutions. A 6m cable with NMEA2000
connector is supplied as standard.
FUR GP330B
Furuno Heading Sensor
• Required for radar overlay on any Navnet system
• Inexpensive heading sensor with the highest
accuracy and stability in this class of equipment
• Automatic correction for local magnetic variation
with an appropriate GPS navigator or manual correction with
an optional remote display RD-30
• High stability by a solid-state rate gyroscope
• Compact waterproof housing with visual status indicators for
a simple installation
• Three heading data output ports: two IEC/NMEA 0183 ports,
one AD-10 port
• High speed heading data output in IEC 61162-2 format
FUR PG500R
► Also See:
Solid State Compass pg 171
Furuno
Furuno Target Auto Plotter
The ARP11 is a 10-target auto plotter designed for use with NavNet
and NavNet vx2, as well as the FR8002 radar series. The ARP
automatically tracks automatically or manually acquired radar
targets and calculates their courses and speeds, indicating them by
vectors. Since the data generated by the auto plotter are based on
what radar targets are selected, the radar must always be optimally
tuned for use with the ARP to ensure required targets will not be
lost or unwanted targets such as sea returns and noise will not be
acquired and tracked.
FUR ARP-11
Furuno Satellite Marine Weather
• Live, up-to-date weather information and
forecasting
• Weather information is delivered via digital
receiver through Sirius’ marine weather
services
• You have the ability to receive weather information and
forecasting that you can overlay onto your C-Map MAX charts
(NavNet vx2) or NOAA raster and vector charts (NavNet 3D)
• Current weather reports, NOWRad nationwide high resolution
weather radar imagery and high-resolution sea surface
temperature images
• TRUE colour radar/chart plotter and Sirius marine weather!
• Includes antenna & 7.6m of cable
Satellite weather receiver service is available for NavNet vx2
7", 10.4" and Black Box units, as well as all NavNet 3D models.
Requires Sirius weather service subscription, sold separately.
FUR BBWX1
Furuno Weather Station Sensor
The enhanced PB150 ultrasonic weather station
instrument features higher-accuracy temperature
readings and improved wind speed and direction
accuracy. Weathercaster PC software version 2.0
puts your own personal weatherman on-board the
boat, 24 hours a day. The easy-to-use program has
multiple screen views and advanced setup features.
Connect the PB150 to a NMEA 0183 display for up-to-the-minute
weather information. Check the weather history graphs, as the
weathercaster software can store readings for up to 72 hours.
Docking the on-board PC or chart plotter can display true wind
data by combining Furunos popular RD30 nav data repeater with
the PB150 weather station, you can now display important weather
information in a large, easy-to-read format. The PB150 has been
fitted with an internal compass as well as a state-of-the-art Furuno
GPS sensor, allowing you to utilize the PB150 as a backup GPS
navigator.
• 15m cable
FUR PB150
167
Furuno Black Box AIS Receiver
• Enhances safe navigation by receiving
critical navigation information from
local AIS-equipped vessels
• Vastly improves situational awareness
in any weather conditions including dense fog, darkness, and
congested waterways
• Dual parallel channel, "full duplex" receiver design receives
AIS contact messages up to 100% more often than dual channel
"multiplexing" receivers
• High sensitivity, synthesized receiver automatically switches
between international and local AIS channels
• Optional amplified VHF splitter allows the use of a single
antenna for VHF radio and AIS receiver
• Network output to NavNet 3D/vx2 and PCs for added
redundancy and installation flexibility
• Serial output for integration with various radar and chart
plotter systems
• AIS viewer software included for on-board PC or land based
installations
• Bulkhead mounting and low power, flexible DC input voltage
design for simplified installations
Requires VHF antenna
FUR FA30
Furuno Network Sounder
• Enhanced detection of fish targets by
FURUNO digital Filter (FDF) fish
finder technology
• Selectable display modes include high
or low frequency, dual frequency, zoom, nav data, a-scope,
marker zoom, bottom zoom or bottom-lock
• Audio and visual alarms alert you whenever preset limits are
met for water depth, water temperature and fish echoes
• 2 selectable automatic gain control modes: cruising and
fishing modes to match your boating purposes
• IP address is automatically assigned to deliver plug and play
installation
• Transducers sold separately
FUR DFF1
► Also See:
600w/ 1kW Dual
Transducers pg 169
Furuno
Depth/Temp/Nav Repeater
• Organizes operation of GPS, video
plotter, radar, echo sounder, etc. For
user's preference
• NMEA 0183 or IEC 61162-1 digital
interface
• Positive display of own ship position, speed, course, water
temperature, depth, speed and direction of current and wind
• AIRMAR Smart Sensor providing water temperature, water
depth and speed relative to water
• Audible alarms for course error, ship speed, cross track error,
temperature, depth, arrival
• High contrast 4.5" silver bright LCD display is night and day
light viewable
FUR RD30
4.5” display
168
Furuno
Furuno FI-150 Series Instruments
• Bright backlit displays with wide viewing angles
• Auto-backlighting feature minimizes power consumption
• NMEA2000 interface offers "plug and play" networking
• Ideal for mast or bulkhead mounting configurations
• White face gauges provide maximum contrast and visibility
• New use organic light emitting diode (OLED) backlighting
technology reduces power consumption
Furuno 2nd Station Display
The FAP5011A is a single-din sized display
designed for use in a NavPilot 500 or NavPilot
511 system where multiple stations are desired.
Multi-station capability, maximum of six stations,
is available through the utilization of a high speed
network. The FAP5011A is supplied with all of
the hardware required to connect to the NavPilot system.
FUR FAP5011A
FI-501 Apparent and true wind angle is displayed
in both analog and digital format when connected
to the FI-5001 or other NMEA2000 wind
measurement system.
FUR FI-501
Wind Angle Display
FI-502 Provides detailed and precise wind bearing
measurements from 60 port to 60 starboard, an
important range for close hauled (CH) points of sail.
FUR FI-502
Wind bearing Display
FI-503 Displays critical digital data for navigation,
such as depth, speed, temp, and atmospheric weather
data in a 3-way split screen.
FUR FI-503
Digital Depth/Speed Display
FI-504 Features a large digital display. The
combination of alpha and numeric characters present
all of the data and functionality available in the FI50 Network. Alternating data displays are possible
and selected information can be switched at 3
second intervals.
FUR FI-504
Multi Function Display
FI-507 Is a large digital display capable of
presenting all of the information available in the
CAN bus network*. Alternating data display mode switches the
user-selected information in 3-second intervals
in large, easy-to-read characters.
W: 6.9" x H: 4.5" x D: 1.9"
FUR FI507*
*Request Item
FI5001 Capable of detecting wind
angle accuracy of better than ±10° and
wind speed accuracy of better than
±5% (20 kt). The FI5001 has a power
requirement of less than 40 mA on a
12VDC system.
• Note: The FI5001 Sensor does not come with a cable
FUR FI-5001
Analog Wind Transducer
An NMEA2000 Junction Box for use with NavNet 3D and the
FI50 series of instrument displays, as well as the FI5001 Wind
Sensor. The FI5002 features 2 NMEA2000 backbone ports, as
well as 6 NMEA2000 ports. Its power requirements are less than
2A on a 12VDC system.
FUR FI-5002
Junction box
3.6” display
Furuno Auto Pilots
• Unparalleled "adaptive" technology
allows NAVpilot to continue
improving your vessel's steering on
every voyage
• Auto set-up and self-learning for vessel speed and course
• Versatile, high-resolution LCDs allow for a variety of userdefined display configurations
• One-touch operation for standby, auto and nav modes
• Exclusive FishHunter feature guides your vessel in orbit, figure
eight or spiral manoeuvres around fish targets
• Network up to six full-size NAVpilot-500, compact
NAVpilot-511 and/or handheld NAVpilot-520 control units
• The NAVpilot-520 (handheld type) can work as a fullfunctioned remote control unit within a NAVpilot system
• Multi language: English, French, German, Italian, Portuguese
and Spanish
FUR NAVPILOT5004.6” display
FUR NAVPILOT5113.6” display
Furuno 2nd Station Handheld
The FAP5021 is a handheld control unit
for the NavPilot series of autopilots. It
features a 3.6" Silver Bright LCD with
a variety of user-customizeable display.
The FAP5021 allows for full control of
your NavPilot system including onetouch STBY, AUTO, NAV and DODGE
selection. Its tactile rotary knob allows for
easy course and menu selection. Mounting bracket included.
FUR FAP5021
Furuno
Furuno Thru-Hull Transducers
235DST-MSE
• 200 watts
• 235 kHz
• Bronze thru-hull
• Depth, speed and temperature (+/ - 1 degree )
• 10m cable with 7-Pin connector
• Can be flush mounted on a hull with up to a 22 degree dead rise
FUR 235DST-MSE
235DST-PSE
• 200 watts
• 235 kHz
• Plastic thru-hull
• Depth, speed and temperature (+/ - 1 degree )
• 10m cable with 7-pin connector
FUR 235DST-PSE
25STID-MSD
• 600 watts
• 50/200 kHz
• 40/10 degree beam angles
• Bronze thru-hull with speed and temperature
• 30 foot cable with 10-pin connector
• High-speed fairing block included
FUR 525STID-MSD
520-PLD
• 600 watts
• 50/200 kHz
• 45/15 degree beam angles
• Low profile plastic thru-hull
• 30 foot cable with 10-Pin connector
FUR 520-PLD
Furuno Transom Mount Transducer
• 600 watts
• 50/200 kHz
• 45/11 degree beam angles
• Plastic transom mount with temperature and
removable speed assembly
• 30 Foot cable with 10-pin connector
FUR 525STID-PWD
Furuno In-Hull Transducer
• 600 watts
• 50/200 kHz
• 45/15 degree beam angles
• Plastic in-hull mount for shoot-through
applications
• 30 foot cable with 10-pin connector
FUR 520-IHD
169
Furuno Smart Sensors
The DST-800PSF retractable smart sensor offers
depth, speed and temperature functions (DT-800PSF
depth & temp. only) in one compact thru hull fitting.
Only one hole in the boats hull makes this multisensor attractive to both boat builders and boat
owners alike. The DST-800PSF is a NMEA2000
device. The wide fore-aft, fan shaped beam is able
to find bottom even when installed on high dead rise hulls or on
sailboats.
• 235 kHz
• Depth, speed and temperature (+/ - 1 degree )
• 2-Meter cable with 5-Pin NMEA2K Connector
• Airmar's patent pending speed signal processing for stable
and high accuracy speed readings from 160 MPH near-flush
housing minimizes drag with only 5 mm (3/16") extending
outside of the hull
• Depth, speed, and temperature insert is easily removed for
quick service or storage
• Self-jacking cap makes it easier to remove insert
FUR DST-800PSF Depth/speed/temp sensor NMEA
FUR DT-800PSF Depth/temp sensor NMEA 2000
Furuno Parts & Accessories
FUR PSU12
FUR 000-010-511
FUR 000-138-974
FUR 000-140-436
FUR 000-144-463
FUR 000-144-534
FUR 000-144-564
FUR 000-144-565
FUR 000-154-027
FUR 000-154-028
FUR 000-154-049
FUR 000-154-050
FUR 000-154-054
FUR 000-159-689
FUR 000-166-945
FUR 000-167-171
FUR 000-167-175
FUR 000-167-176
FUR 000-167-177
FUR 000-167-962
FUR 000-167-963
FUR 000-167-964
FUR 000-167-965
FUR 000-167-966
FUR 008-523-070
Power supply unit DRS4A/6A W/MFD8
30m cable for fi 5001 sensor
20m radar extension cable 18x4c
20m radar extension cable 19x4c
.5m hub adapter cable
10m BBWGPS extension cable
15m signal cable assembly
20m signal cable assembly
1m ethernet cable
5m NMEA 7pin cable
5m ethernet cable
10m ethernet cable
5m NMEA 6pin cable
Navnet display adapter
5m NMEA2000 cable assembly 1ended
3m network cable assembly RJ45
2m network cable assembly RJ45
5m network cable assembly RJ45
10m network cable assembly RJ45
1m NMEA2000 cable assembly 2ended
2m NMEA2000 cable assembly 2ended
6m NMEA2000 cable assembly 2ended
1m NMEA2000 cable assembly 1ended
2m NMEA2000 cable assembly 1ended
Video interface kit for 10.4" display
AFFORDABLE VESSEL MONITORING & CONTROL
Display software
You decide what to monitor and control
Maretron products plug and play over the
open industry standard – NMEA 2000®
Anchor Monitoring
•
AC Power Monitoring
•
DC Power Monitoring
•
Depth Monitoring
•
AC/DC Electrical
•
•
•
•
•
•
Distribution Monitoring
Engine Monitoring
•
Environmental Monitoring
•
Speed / Distance Monitoring
Tank Monitoring
Time & Date Information
Transmission Monitoring
Vessel Attitude and Trim
Tabs Monitoring
Wind Speed and Direction
•
Monitoring
GPS Monitoring
•
Heading Monitoring
•
•
•
Indicator Monitoring
•
Fuel Management
AC/DC Electrical Distribution
Control
Navigation Monitoring
•
Rudder Position Monitoring
•
•
•
Alerts
Video
www.maretron.com | 866.550.9100
Maretron
Maretron Wind & Weather Station
Maretron’s outdoor weather station measures
wind speed and direction, air temperature,
barometric pressure, and relative humidity. The
wind measurement is performed using ultrasonic
sensors, which means there are no moving parts to wear out or to
get caught in the rigging. The WSO100 accurately measures wind
speed and direction even when tilted, making it ideally suited for
heeled sailboats or powerboats operating in pitching and rolling
seaways. When used with Maretron displays (DSM200/DSM250/
N2KView), you can view apparent wind speed and direction,
humidity, air temperature, barometric pressure (with graphs to
see trends), wind chill factor, heat index, and dew point. If you
add speed through water (DST100), GPS (GPS100) and compass
(SSC200), you can view true vessel referenced wind speed and
direction as well as ground referenced speed and direction.
• Apparent wind speed
• Apparent wind direction
• Atmospheric pressure
• Air temperature
• Relative humidity
• Dia: 4.25" x H: 3.45"
MRE WSO100-01
Maretron Solid State Compass
Maretron’s SSC200 is a solid state, rate gyro
electronic compass that provides better than 1°
heading accuracy through ±45° of roll and pitch
angle, and better than 1° roll and pitch accuracy in
static conditions. Each SSC200 is factory calibrated
for maximum accuracy. It delivers precise, reliable heading
information ten times per second, plus vessel attitude including
pitch and roll readings once per second. A micro machined rate
gyro is used by advanced stabilization algorithms to provide
accurate, stable readings during dynamically changing conditions
such as hard turns or rough seas, making it an ideal heading sensor
for autopilot applications. Maretron’s SSC200 is certified to the
NMEA 2000 network standard and compatible with the NMEA
0183 digital interface standard. It connects directly with any NMEA
2000 network and/or NMEA 0183 listeners to share information
with navigational software, chart plotters, autopilots, and dedicated
instrument displays - including Maretron’s DSM250 and DSM200
graphical displays.
• 4.46" x 3.23" x 2.14"
MRE SSC200-01
171
Maretron NMEA 2000
GPS Antenna/Receiver
32 channel GPS antenna and receiver
capable of providing five position fixes
per second, accurate boat speed four times
per second, and precision time once per
second. An additional benefit of the GPS200 is that it broadcasts
precision magnetic variation information using the current position
and world magnetic model (WMM-2010).
The GPS200 antenna/receiver is a plug-and-play device that is
fully compliant and certified to the NMEA 2000 Standard. It will
directly connect to any NMEA 2000 network and communicate
with navigational software, chart plotters, autopilots and dedicated
instrument displays.
The GPS200 automatically decodes GPS correction signals from
Satellite Based Augmentation Systems (SBAS) including the North
American Wide Area Augmentation System (WAAS), the European
Geostationary Navigation Overlay System (EGNOS), or the Asian
Multifunctional Transport Satellite-based Augmentation System
(MSAS) to provide better than 2.5m accuracy.
The GPS200 is easily mounted to any 1” standard marine mount
with its standard 1”-14 male threads. It can also be mounted
directly to a deck, or even (due to it's unprecedented sensitivity)
underneath a fibreglass deck.
MRE GPS200-01
172
Maretron
Maretron Colour Display
Maretron Gateway
Maretron’s DSM250 is a highresolution sunlight viewable colour
display that allows easy interpretation
of NMEA 2000 instrument and
navigation data through custom display configurations, featuring
an easy-to-use five-key illuminated keypad. Unlike traditional
single-display units, DSM250 users can choose numeric, gauge, or
graph formats in single or multiple displays, with cycling options
possible for a wide range of favourite data. These multiple display
options conserve mounting space and reduce overall system
cost. The DSM250 will directly connect with any NMEA 2000
network and display any or all information captured throughout
the vessel. Various audio and visual alarms are also programmable.
The DSM250 displays a multitude of information including AC
power, battery, depth, engine, environment, fuel management,
GPS, heading, navigation, rudder, speed, tanks, time, transmission,
weather, wind and more. Maretron’s DSM250 is engineered
and manufactured to the highest standards (IEC 60945 maritime
navigation and radio communication equipment). Its compact
waterproof housing will provide years of reliable performance.
W: 6.875" x H: 5.75" x D: 1.75"
Maretron’s J2K100 attaches directly into J1939
networks of compatible engines, transmissions,
and gensets and converts the J1939 data to the
new marine digital interface (NMEA 2000).
Critical engine, transmission, and genset data
is then distributed throughout the vessel over a single cable where
it can be monitored by any NMEA 2000 compatible display. The
J2K100 can also be used as part of a complete fuel computer.
Simply connect the J2K100 together with Maretron universal
displays (DSM200/DSM250/N2KView) and GPS antenna/receiver
(GPS100) and you have a system capable of displaying gallons per
hour and/or miles per gallon.
3.11" x 3.46" x 1.38"
MRE DSM250-01
Maretron Transducer
Maretron’s DST100 Smart retractable depth/ speed/
temperature transducer, delivers precise digital
depth, accurate speed and exact water temperature
even at speeds above 40 knots — all with no
programming or calibration necessary. Its patented Smart sensor
technology, retractable and removable sensor, and NMEA 2000
network connectivity make the DST100 easy to interpret, easy
to install and connect with other navigation equipment, and easy
to maintain. The DST100 measures precise water depth at 0.4m
to 60m with a wide beam width and is tolerant to most dead rise
angles. It reads water temperature from -10°C to +40°C at ±1.0°C
accuracy, and accurate speed from 1 to 60 knots. At 235kHz it can
be used with a fishfinder as an ideal navigation tool for sport or
commercial fishing vessels—or with sailing vessels of all sizes. The
DST100’s plastic housing is compatible with any hull material. It
includes a blank plug to replace its sensor unit when the vessel will
be docked for extended periods or trailered. This prevents damage
to the sensor and reduces fouling growth. Maretron’s DST100
is CE compliant (IERC945) and is manufactured to the highest
quality standards under ISO9K/2K procedures.
MRE DST100-01
Bronze housing
MRE J2K100-01
The J2K100 converts the following
information:
• AC generator current
• AC generator frequency
• AC generator voltage
• Tachometer
• Engine hours
• Coolant pressure
• Coolant water temperature
• Engine oil pressure
• Engine oil temperature
• Boost pressure
• Fuel rate monitoring
• Charging voltage
• Percent engine load
• Percent engine torque
• Rated engine speed
• Vin
• Software
• Transmission gear
• Transmission oil pressure
• Transmission oil temperature
The J2K100 Gateway
is compatible with any
engine, transmission, or
genset equipped with a
J1939 interface, including
products from the following
manufacturers:
• Caterpillar
• Cummins
• Detroit Diesel
• John Deere
• Kohler
• Northern Lights
• Onan
• Perkins
• Steyr
• Volvo Penta
• Yanmar
Maretron USB Gateway
A gateway for bridging USB equipment using
NMEA 0183 sentences - such as an on-board
computer running navigational software - with an
NMEA 2000 network. The gateway automatically
converts incoming NMEA 2000 messages to
NMEA 0183 sentences so you can continue benefiting from
navigational and charting software that you already own while
enjoying the many benefits of networked NMEA 2000 instruments.
The USB100 translates a multitude of NMEA 2000 messages to
NMEA 0183 sentences including GPS data, Speed Over Ground
(SOG), Course Over Ground (COG), vessel heading, rudder angle,
depth, speed, distance log, weather, wind and more. Engineered and
manufactured to standards IEC 60945 (maritime navigation and
radio communication equipment).
• 3.11" x 3.46" x 1.38"
MRE USB100-01
Maretron
173
Maretron Tank Level Adapter
Maretron Direct Current (DC) Monitor
The TLA100 is used to adapt commercially
available resistive tank senders to the NMEA
2000 network. This allows you to observe tank
levels anywhere on the vessel where there are
NMEA 2000 compatible displays such as the
Maretron DSM250 or DSM200. The TLA100
is compatible with both the American standard
(240-30 ohm) and the European standard (10180 ohm) resistive senders. In fact, the TLA100
can be calibrated for any resistance between 0 and 300 ohms.
Unlike most tank senders that only work with rectangular tanks,
the TLA100 can be calibrated for irregular tank shapes so you
know the true level of the tanks. You can also use the TLA100
with analog gauges at the same time as NMEA 2000 so you don’t
have to give up existing analog gauges to enjoy the advantages of
digitally networked information.
• NMEA 2000 Interface
• Adapts American standard (240-30 ohm) resistive senders to
NMEA 2000 Network
• Adapts European standard (10-180 ohm) resistive senders to
NMEA 2000 Network
• Calibrated for any resistance range from 0 to 300 ohms or 300
to 0 ohms
• Accommodates irregularly shaped tanks with 16 point
calibration
• 16 Programmable tank types including fuel, fresh water, waste
water, live well
• Programmable tank number (s) up to 16 per tank type
• Programmable tank capacity
• Works alongside of analog gauges
• Can be used standalone without analog gauges
Maretron's DCM100 DC Monitor is an
advanced electronic monitoring device used
to measure the voltage and current of any
direct current (DC) power source or load.
Examples of DC power sources that can be
monitored with the DCM100 include batteries,
alternators, solar panels, and wind generators.
The DCM100 can also be used to monitor DC loads like inverters,
windlasses, DC refrigerators, or any DC branch circuit. When the
DCM100 is used to monitor batteries, sophisticated circuitry and
software algorithms monitor battery temperature, load current,
charging current and terminal voltage to precisely compute battery
state of charge, state of health, and time remaining. To measure
current, the DCM100 uses an effect current sensor which simply
slips over the wire - you don't have to break connections or install
connectors as you do with inline shunts used by other solutions.
The DCM100 is NMEA 2000 certified so you can view any and all
DC information anywhere on the vessel using a compatible NMEA
2000 display. The DCM100 is a key component of Maretron's
N2KView vessel monitoring and control system.
• 3.5" x 4.2" x 2.03"
MRE TLA100-01
Maretron
Alternating Current (AC) Monitor
Monitors AC power sources and outputs
information about these sources onto the industry
standard NMEA 2000 marine data network. The
ACM100 can monitor power busses, generators,
or utility power. ACM100 output information is then displayed with
networked NMEA 2000 equipment such as the Maretron DSM250
dedicated display or with NMEA 2000 compatible software such
as Maretron N2KView. Best of all, the ACM100 is NMEA 2000
certified so you can view any and all AC information anywhere on
the vessel using a compatible NMEA 2000 display. The ACM100
is a key component of Maretron’s N2KView vessel monitoring and
control system.
• 3.5" x 4.2" x 2.03"
MRE ACM100-01
MRE DCM100-01
Maretron Adapter Cords
MARE-005 The Raymarine E-Series product
to NMEA 2000 network adapter cable is used
to connect a Raymarine E-series product, such
as an E80 or E120 display, to an NMEA 2000
network. The cable is 1 meter in
length and has a female Raymarine
E-series connector on one end
and a standard male NMEA 2000
Micro series connector on the other end. Simrad SimNet product
to NMEA 2000 network adapter cable, manufactured by Simrad,
is used to connect a Simrad SimNet product like the NMEA 2000/
NMEA 0183 Adapter (AT10) or CX NavStation series products to
an NMEA 2000 network. The cable is 0.5 meters in length and has
a female SimNet connector on one end and a standard male NMEA
2000 Micro Series connector on the other end.
MRE MARE-002
MRE MARE-005
NMEA2000 to Yamaha CMD
Raymarine E-Series to NMEA2000
174
Maretron
Maretron Micro Cables & Connectors
MRE CF-SPWRO5-CF
MRE CM-CF-4
MRE FA-CF-ST
MRE FA-CM-ST
MRE IT-CM-CF
MRE CM-CF-CF
MRE TR-CF
MRE TR-CM
Powertap tee 5m
4 Way multi-port box
Field attachable connector female
Field attachable connector male
In-line termination resistor
Micro tee
Micro termination resistor (female)
Termination resistor (male)
MRE CG1-100
MRE CM-CG1-CF01.0
MRE CM-CG1-CF-03
MRE CM-CG1-CF-06
MRE CM-CG1-CF-10
Cable
Double ended cordset-1m
Double ended cordset-3m
Double ended cordset-6m
Double ended cordset-10m
Maretron Mini Cables & Connectors
MRE FA-NF-ST
MRE FA-NM-ST
MRE NF-NM4P-NF
MRE NM-CF-NF
MRE TR-NM
MRE TR-NF
MRE 24005729
MRE AT-10
MRE DST100-01
Field attachable connector female
Field attachable connector male
Powertap
Mini/micro tee
Termination resistor (male)
Termination resistor (female)
SIMRAD simnet adapter cable
NMEA 2000/NMEA 0183 Bridge
Depth/speed/temp triducer
MRE NG1-100
MRE M84-0050
MRE NM4P-05
Cable
Mini cable
Power cordset 5m
Depth Sounders
Maretron Diagnostic Tool
The N2KMeter is a diagnostic tool
for NMEA 2000 networks that allows
users to validate NMEA 2000 network
compatibility and operations during
installation of a device or complete
system, and diagnose possible network
flaws or failures that occur on an
operational network. Cut troubleshooting
time from hours to seconds, by effectively
identifying and diagnosing network problems. N2KMeter provides
the detailed technical information an NMEA 2000 troubleshooting
expert needs, yet it simplifies and summarizes, allowing an
NMEA 2000 novice to effectively identify and diagnose network
problems. Battery-powered operation allows a novice user to save
readings for experts to analyse later, off the boat. N2KMeter uses
a patented integrated intelligence technique to summarize multiple
NMEA 2000 network operational variables into a single health
index. To a service technician, it's a "guru-in-a-box", providing a
detailed reading of network performance. It summarizes NMEA
2000 network health by displaying a happy face icon, indicating
a healthy network; a sad face, indicating a serious problem; or a
neutral face, indicating nominal performance (a good indication to
repair things before they actually fail). N2KMeter then walks the
user through each fault condition and its source, or it can record
key operating parameters for offline review.
MRE N2KMETER-01
ACR Class B Transponder
• Small in size
• Plug and play
• Transmits and receives
• Water resistant
• Remote SRM switch
• GPS receiver
Enjoy the benefits of the AIS system knowing larger commercial
vessels are aware of your position increasing your personal
safety while navigating at sea. Unlike receive only AIS devices
which do not transmit vessel information to surrounding traffic,
the Nauticast-B system allows you to virtually participate
in neighbouring vessels manoeuvring activities for collision
avoidance. Announce your identity, position, speed and course
over ground to oncoming traffic allows for increased security
that you will be seen in low visibility conditions. Avoid not being
seen because of extreme weather conditions or busy vessel traffic
environments. Generate a safety distress message to surrounding
AIS equipment, including vessels, base-stations, and possibly SAR
teams. All in all, it is a horizon expanding experience; especially in
combination with an electronic chart system.
ACR 2680
175
Hawkeye
Portable Depth Sounder
To Use: Simply turn the power on, toss
the unique floating sonar sensor from the
shoreline, bridge, or boat and instant depth,
fish, weed, and bottom contour readings are
now in the palm of your hand.
• Unit dimensions:. .................. 1.5”H x
2.8”W x 4.3”D
• Display window size:. ........... 1.5”W x 1.8”H
• Display type:. ........................ VirtuView liquid crystal icon
• LCD backlighting:................. Green LED softglow
• Power requirement:............... 4 x ’AAA’ alkaline batteries
• Battery life:............................ 30 hours continuous use
• Units of measure:. ................. Feet & meters
• Depth range min - max:. ....... 1.5' - 99.9'
• Readout increments:.............. 1 Foot/meter
• Sonar sensor type:................. Floating, trollable, shoot-thru
• Sonar sensor cable:................ 35'
• Operational temp. range:....... 0 to 122° F
• Warranty:............................... 2 years
NRC F33P
Hawkeye Portable Depth Sounder
The 2200PX is the most versatile
hand-held depth sounder ever
produced. Use it in the winter to
shoot through ice before cutting
your hole. Use it in the summer
as a range finder and temperature
meter while diving. Use it as a
backup depth sounder on your
pleasure boat.
• Fish detection indicator
• Positive buoyancy/floats
• SideScan for depth drop-offs or hiding fish
• Unit dimensions:. ...................7” x 2” x 2”
• Unit weight:............................8 oz
• Display type:. .........................Polarized LCD
• Display window size:. ............1.6” x .75”
• LCD backlighting:..................Softglow
• Temperature readout:.............14 to 122° F
• Depth range min - max:. ........2.5 - 199'
• Depth readout increments:......1 Ft/m
• Power requirement:................4 ‘AA’ batteries (not included)
• Battery life:.............................30 hours continuous use
• Units of measure:. ..................Ft, M / F, C
• Waterproof rating:..................IPX 8
• Waterproof limit:....................200'
• Warranty:................................2 years
NRC H22PX
176
Depth Sounders
Hawkeye Depth Sounders
Hawkeye PWC Depth Sounder
The HawkEye Digital Depth Sounder
(DF1000D) is designed to give precise
depth readings from 2.5 to 200 feet,
up to 63 mph. Utilizing a sophisticated
microprocessor, it reacts instantly to
changes in depth, and will warn you
of depth changes using the built-in 3 Stage Advanced Warning
System M. The unit mounts in a standard 2-1/8” gauge hole, or can
be surface mounted using HawkEye’s MB01 mounting bracket.
The unit’s auto-ranging, auto-sensitivity features ensure precise
readings under any condition.
• Case dimensions:...............2” Dia, 1.75” Depth
• Display window size:. .......1.65” x .87”
• Display type:. ....................Polarized liquid crystal
• Backlighting:.....................Green softglow display & buttons
• Units of measure:. .............Feet and meters
• Readout:.............................2.5 - 99.9', 100 to 200'
• Depth range min-max:. .....2.5' - 200'
• Transducer type:................Transom/glue in (in-hull)
• Transducer cable:. .............30'
• Alarm signalling:. .............Audible, red led, blinking LCDs
• Alarm range:......................3-200’ full range
• Warranty:...........................2 years
Features completely waterproof
construction, micro-display housing, and
ShootThru sonar technology. The D11S’s
compact micro-display housing can
be easily mounted within reach on any vessel’s dash, while Easy
Touch Programming allows one-touch access to a built-in audible
depth alarm. An auto-off feature even kills the power. Instant depth
updates to the nearest 1/10th foot or meter, updated four times per
second.
• Display dimensions:........... 2.44 x 1.24”
• Display window size:. ........ 97” x .67” • Display type:. ..................... Polarized LCD
• Units of measure:. .............. Feet and meters
• Readout:.............................. 1.5 - 99.9'
• Depth range min-max:. ...... 1.5' - 99.9'
• Transducer type:................. Transom/glue in (in-hull)
• Transducer cable:. .............. 30'
• Alarm signalling:. .............. Audible, blinking LCD icons
• Depth alarm range:............. 2 - 10'
• Waterproof rating:.............. IPX7
• Warranty:............................ 2 years
NRC D10D
NRC P06
Clam pack
Thru-hull transducer
Hawkeye Digital Depth Sounder
with Air/Water Temperature
The D10DX includes all the advanced sonar, depth alarm, and keel
offset capabilities of the D10D, yet incorporates dual temperature
displays. A simple press of a button gives instant access to water
or air temperature readings via integrated sensors in both the
transducer and head unit. Includes interchangeable black and white
bezels and face plates, and also a sun cover to protect the LCD
during storage.
NRC D10DX.01T
NRC D10DX.06T
Transom transducer
Thru-hull transducer
Hawkeye Mounting Brackets
MB01 allows the surface mount of any in dash
depth sounder.
NRC MB01
NRC D11S
Uniden Digital Depth Sounders
• Transducer freq of 200 KHz
• Backlit LCD display
• Depth from 2.5 - 200 ft.
• Shallow water alarm
• 250 Watts of transmitting power
• 3 Optional transducers
UNI QT-206B
UNI QT-206WB
UNI QT-206HP
UNI QT-206WHP
UNI QT-206C
Black with transom transducer
White with transom transducer
Black with in-hull transducer
White with in-hull transducer
Black with through-hull transducer
Faria Depth Sounders
Digital depth sounders can be bought with
options of an in hull transducer or transom
mount transducer.
• Depth range to 199' (61m)
• Reads depth in meters, fathoms and feet
• Keel offset, shallow/ deep water audio and visual alarms.
FAR 12850
FAR 12851
FAR 12950
FAR 12951
FAR 13850
► Also See:
Euro Black w/ transmount transducer
Euro Black w/ in-hull transducer
Euro White w/ transmount transducer
Euro White w/ in-hull transducer
Chesapeake White w/ transom transducer
Faria Depth Sounders pg 158
177
C-Map
C-Map
C-Map
electronic Charts
MAX Features
Welcome to Jeppesen Marine, home of
award-winning C-Map electronic charts.
Around the world, more navigators trust
C-Map to make their time on the water safer,
easier and more enjoyable. Whether you prefer
PC-based navigation or use GPS/chart plotters
from leading manufacturers, C-Map is the only
electronic chart solution you’ll ever need.
Trust us for the
most accurate,
up-to-date
cartography
worldwide and
powerful charting features to guide your sailing,
cruising and fishing adventures. You can also count
on our industry leading customer service and
technical support to be there when you need it, so
you can enjoy every day on the water.
When it comes to MAX, there's no comparison. Advanced features make cruising,
sailing and fishing easier, safer and more fun. With the most accurate chart detail,
versatile features and a wealth of important value-added data, we take your
boating enjoyment to the MAX!
Flashing navAids
photos & diagrams
EXCLUSIVE
dynamic surface Currents
Guardian Alarm
MAX Technology
MAX electronic charts are available
in several formats to suit your
navigational needs...
EXCLUSIVE
perspective View
specialty Charts
C-card
SD-card
Disc
detailed Marina Charts
MAX 2008 Chart Libra
EXCLUSIVE
MAX Lakes
north America
Ultimate electronic maps for better freshwater
fishing and hunting!
Wides
C-Map brings new power to your plotter with
MAX Lakes freshwater electronic maps.
Designed for freshwater fishing and hunting,
MAX Lakes delivers the highest level of
detail and value-added data not found on any
other electronic map on the market. Plus the
MAX Lakes database is constantly growing
and updated yearly!
NA-M021
NA-M022
NA-M023
2
Jeppesen is proud to FeAture C-MAp produCts
Shaded Depth Areas (up to 16 colors)
Points Of Interest (POIs)* such as
campgrounds, shops, gas stations & more.
~ State Fishing Regulations*
~ State Hunting Regulations*
~ Fish Identification Photos*
~ Water Fowl Identification Photos*
~ Interstate Highways, Secondary and
Lake Roads
~ Boat Ramps
~ National Parks and Recreation Areas
~
~
*Indicates those features not found in competitive freshwater maps
Call for Details & Selection
MAX Bathymetrics
The power of MAX meets the
added contour shading and
high detail of bathymetric
bottom data. We put more
c-map.com
3
Standard Coverage
NA-M024
NA-M025
NA-M026
NA-M027
NA-M028
SA-M500
SA-M501
Canada North and East
U.S. East Coast and the Bahamas
U.S. Gulf Coast, Inland Rivers and the
Great Lakes
U.S. West Coast and Hawaii
Canada West
Great Lakes and the Maritimes
Central America and the Caribbean
Alaska
Costa Rica to Chile and the Falklands
Gulf of Paria to Cape Horn
MegaWides
M
p
•
•
•
•
•
Larger Coverage
NA-M033
NA-M034
SA-M503
Atlantic Coast, Gulf and the Caribbean
Pacific Coast, Gulf and the Caribbean
South America, Gulf and the Caribbean
Continental Cards
Full Coastal Coverage
NA-M036
NA-M037
MAX U.S. (no inland lakes or rivers)
MAX Canada (no inland lakes or rivers)
Bathymetrics (not shown)
Bottom Contour Data
NA-M320
NA-M321
Passamaquoddy Bay, ME to Cape
Lookout, NC
Cape Henry, VA to Apalachicola Bay, FL
A
a
a
s
o
t
178
C-Map
North America
MAX Wides @ $199
(1) NA-M021
Canada North
and East
(2) NA-M022
U.S. East Coast
and the Bahamas
(3) NA-M023
U.S. Gulf of
Mexico, Inland
Rivers and the
Great Lakes
MAX, the Ultimate
Navigator, brings electronic
charts to life. See NavAids
on the screen exactly as
they appear through your
pilothouse window. Get
at-a-glimpse information
about current strength and
direction. Even view an aerial
photograph of an unfamiliar
inlet before you enter.
MAX gracefully combines
unparalleled levels of chart
accuracy and detail.
(4) NA-M024
U.S. West Coast
and Hawaii
(5) NA-M025
Canada West
(6) NA-M026
Great Lakes &
the Maritimes
(7) NA-M027
Central America
and the
Caribbean
(8) NA-M028
Alaska
North America
8
Jeppesen is proud to FeAture C-MAp produCts
MAX MegaWides @ $249
(1) NA-M033 c-map.com
Atlantic Coast,
Gulf of Mexico
and the Caribbean
9
(2) NA-M034
pacific Coast,
Gulf of Mexico
and the Caribbean
10
Jeppesen is proud to FeAture C-MAp produCts
c-map.com
11
TRUE MARINE ENTERTAINMENT
BETTER DESIGNED,
BUILT AND BACKED
BETTER CONSTRUCTION
UNIQUE AND SUPERIOR iPod INTERFACE
Designed specifically for the marine environment.
An industry leading IPX5 360o waterproof rating,
solid die cast chassis and sealed over-moulded
cable looms ensure the ultimate in rugged design.
Nothing beats digital music on a boat. FUSION’s
unique software and iPod
docking technology provides
a superior user interface and
protection for your iPod.
SUPERIOR ZONE TECHNOLOGY
Boats have multiple spaces that require a
different sound level. The cockpit, flybridge or
tower on a ski boat needs to be much louder than
the salon. FUSION’s unique Zone Technology is the
only brand to deliver this capability.
HIGHER POWER OUTPUT,
LESS POWER CONSUMPTION
There is no substitute for power in audio
equipment. Most FUSION True Marine stereo’s
boast 4x70W output, 40% more powerful
than the closest competitor. The unique class
D amplifier requires nearly 40% less power
consumption than competitive products.
BETTER DESIGN
Boats are a moving platform, that’s why at
FUSION our stereos feature large easy to read
displays and keys, and a large rotary knob for
primary functionality. You’ll appreciate the design
differences in a 6’ swell.
BETTER BUILT MEANS BETTER BACKED
FUSION Electronics offers an industry-leading Limited Five Year Consumer Warranty on
all True Marine products consisting of a three year warranty plus a two year warranty
extension. For full terms and conditions visit www.fusionelectronics.com
MS-IP600
MARINE STEREO for iPod
MS-AV600
MARINE DVD STEREO
MS-CD600
MARINE CD STEREO
MS-RA200
MARINE STEREO
» AM/FM/Sirius Ready.
» AM/FM/Sirius Ready/DVD/CD/CD-R/CD-RW,
MP3 playback.
» AM/FM/Sirius Ready/CD/CD-R/CD-RW,
MP3 playback.
» AM/FM/Sirius Ready/VHF receiver,
USB playback.
World first iPod docking system ensures
your iPod is waterproof, charging and secure
inside the stereo while you are on the water.
4x70W. 3-Zone audio control. Large 2.7” dot
matrix display.
FUSION has produced an impressive stereo
capable of playing CD/MP3 and DVD.
4x70W. 3-Zone audio control. Large 2.7” dot
matrix display.
The Marine CD Stereo includes the same
great benefits as the MS-IP600, but features
a CD/MP3 drive instead of an internal iPod
dock.
The palm size marine stereo featuring a VHF
receiver is ideal for space conscious installs.
4x50W. 2-Zone audio control. Dot matrix
display.
www.fusionelectronics.com
Specifications and design are subject to change without notice. *The IPX5 standard requires water projected in jets against the installed enclosure from any direction to have no harmful effects. For the latest news on supported iPod models visit www.fusionelectronics.com
iPod is a trademark of Apple Inc., registered in the U.S. and other countries. “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
180
Marine Stereos
Fusion 600 Series Features
• 2.7" greyscale LCD display
• Powerful D-class 70W x 4 (Max)
• Multi-Zone control for different levels of volume in different
areas of the boat from a single source of audio; 3 zone
• High quality AM/FM tuner
• Auxiliary in
• Electronic skip protection (MS-CD600, MS-AV600)
• 360° IPx5 waterproof rating
• Large rotary encoder and rubber back lit buttons
• Electronic bass / treble / balance control
• Fusion Alpha Search Technology (FAST) allows for quick
navigation of your iPod data
• Zone line out (1 x stereo, 1 x subwoofer)
• Subwoofer level control
• 12/24 hour clock
THIS IS TRUE MARINE
FUSION’s stamp of quality and assurance that our audio products are
designed and engineered specifically for the marine environment.
TRUE 360˚ WATERPROOF DESIGN
Complies with IPx5* Waterproof standards
INNOVATIVE MULTI-ZONE CONTROL
Fully adjustable volume control in all zones of the vessel.
USER FRIENDLY
User interface is intuitive and simple to use, while the recessed back lit
keypad is large enough to view and operate in the roughest conditions.
TRUE DOCKING FOR iPod
Keeps your iPod waterproof, secure and protected. Complete iPod
integration and control is provided through a replication of the iPod menu on
the stereo display
SUPERIOR DIE-CAST CONSTRUCTION
SUPERIOR DISPLAY
Large, adjustable back lit LCD allows for accurate display of the iPod and
Sirius interface.
Fusion Marine iPod Stereo
• A unique iPod docking system ensures your iPod is waterproof,
charging and secure inside the stereo while you are on water
• AM/FM/SIRIUS Ready
FUE MS-IP600G
Fusion Marine CD Stereo
• This CD Stereo includes the same features as the MS-IP600,
but has a CD/MP3 drive instead of an internal iPod dock
• CD / CD-R / CD-RW, MP3 playback
• AM/FM/SIRIUS Ready
FUE MS-CD600G
Fusion Marine DVD Stereo
• Stereo capable of playing CD/MP3 and DVD
• AM/FM/SIRIUS Ready
• Add the optional External Dock for the iPod to gain the
benefit's of FUSION's iPod connectivity
FUE MS-AV600G
Fusion iPod Marine External Dock
The dock connects directly to your Marine
Stereo, allowing full control and integration
of your iPod through the Stereo. The
bulkhead mount dock complies with IP65
waterproof and dust standards on the front
of your unit, protecting your iPod from the
harsh marine environment
Compatible with the CD Stereo (MS-CD600) & DVD
Stereo (MS-AV600)
ADVANCED POWER SAVING
High output efficiency and low battery drain through the latest D-Class
Amplifier technology.
FUSION Electronics offers an industry-leading limited 5 year consumer
warranty on a number of our True Marine products – consisting of a three
year warranty plus a two year warranty extension. Conditions apply.
Compatible with the following iPods
•
•
•
•
•
•
iPod classic, 80GB 120GB 160GB (2007, 2009);
iPod with video, 30GB 60GB 80GB;
iPhone; iPhone 3G; iPhone 3GS
iPod touch; iPod touch (2nd Gen);
iPod nano (3nd Gen); iPod nano (4th Gen);
iPod nano (5th Gen)
Fusion Marine Stereo
• AM/FM/Sirius Ready
• VHF/Weather receive
• 50W x 4 amplifier
• IPx5 waterproof rating
• 2 zone audio control
• MS-IPDK and MS-IPDKUSB compatible
• 1 year warranty
• Faceplate: 6.2" x 2.7"
FUE MS-RA200
FUE MS-IPDOCK-G2
Fusion 600-Series Wired Remote
• Enables local control of the audio in each zone of your vessel
• Up to three remotes can be linked to the stereo
• Complies with IPX5 waterproof standard
• Plug & Play - no external power required
• Comes with 6m cable
FUE MS-WR600-C
Parts:
FUE MS-WR-600EXT6
FUE MS-WR-600Y
6m extension cable for remote
Remote Y cable for remote
Fusion Marine Stereo Combo
• Complete with MS-RA200 Stereo (see above), MS-DKIPUSB iPod Dock and FSM-65 Speakers
• MS-DKIPUSB allows user to dock iPod in a safe, waterproof
enclosure; slides in a tooled sleeve; no bouncing or banging
while under way
FUE MS-RA200KTSD
Marine Stereos
Fusion 2-Way Speakers
• Complies with IP65 waterproof and dust standards
• Efficiency (1W/1M): 90dB
• Frequency response: 70Hz-22kHz
• Impedance: 4 Ohms
• Magnet type: Shielded
• Max Power (Watts): 200
• Tweeter type: Titanium dome
FUE MS-FR602
6"
• 200 watt
• Mounting depth: 75mm (3”)
FUE MS-FR702
7"
• 250 watt
• Mounting depth: 80mm (3.15”)
*Speakers come complete with three grille options (cloth, standard
and sport) as well as three gel badge options.
Fusion 2-Way Speakers
Complies with IP65 waterproof and dust standards and features
a fully sealed cross-over, magnet and tweeter housing with
waterproof cone and surrounds.
• Efficiency (1W/1M): 87dB
• Frequency response: 90Hz-22kHz
• Impedance: 4 Ohms
• Magnet type: Shielded
• Max Power (watts): 120
• Mounting depth: 60mm (2.36")
• Tweeter type: Titanium dome
FUE MS-FR402
4”
Fusion 2-Way Speakers
• 6.5" poly carbon cones
• Water resistant construction
• Removable grill
• 25 oz magnet
• 1" high temperature aluminum voice coil
• 1" Mylar dome tweeter
• Power handling: 200 watts max.
• Frequency response: 80-20,000 Hz
• Sensitivity: 90dB
• 4 ohm impedance
FUE FSM-65
Fusion 2-Way Box Speakers
• 3.5" woofer
• 1" super titanium tweeter
• Fully sealed UV resistant cabinet
• Indoor/outdoor equalization switch
• Aluminum mesh grill and mounting brackets
• Power Handling: 120 watts max
• Frequency response: 90Hz-22KHz
• Sensitivity: 87dB
• Impedance: 4 ohms
• W: 18cm x H: 18cm x D: 14cm
181
D-Class technology is highly efficient amplifier technology and utilized in
FUSION’s Marine Stereos (MS-CD600), (MS-AV600) and (MS-IP600) and
Marine Zone Amplifier (MS-AM702).
It allows higher levels of output with less power use, resulting in lower
battery drain. This enables you to listen to your music louder, and for
longer, than a regular audio system without the concern of high levels of
battery drain – a great advantage in the marine environment.
Fusion Internal Cube Speakers
FUSION’s internal cube speakers offer cabin-filling stereo
performance from a small, versatile package. The dual pivot
design enables a range of different installations; free standing,
wall or ceiling mounted. Combine your
cube speakers with any Fusion marine
stereo and/or amplifier for pure audio
reproduction.
Discrete Enclosures:
• ABS + UV speaker enclosures
• Feature a Dual Pivot Design enabling a
mixture of direct and reflected cabin filling sound
• Includes mounting brackets
Midbass Technology:
• 2 x 2.5” Polypropylene Mica driver technology per dual cube
FUE MS-BX225
Fusion Subwoofer
Designed to produce unparalleled bass in the
marine environment. Added to our audio system,
marine subwoofers increase the bass level of
your music or improve the overall sound quality.
To operate your subwoofer correctly you must
also install a 2 or 4 channel amplifier.
FUE MS-SW10
10” 400W
Fusion 8" Active Subwoofer
Discrete Enclosure:
• Rigid ABS + UV enclosure
• Tuned Bass reflex design
• Down firing subwoofer system
• Vertical & horizontal mounting options
• Included stainless 304 hardware
Amplifier:
• 210 Watts (MAX) amplifier
• Conformal coated PCB assembly
• Power / ground “plug and play” wiring system
• Level and bass frequency variable adjustment
High Output 8” Subwoofer:
• Injection molded Polypropylene cone assembly
• Long throw voice coil
• Frequency Response: 30Hz - 300Hz
• Impedance: 4 Ohms
FUE MS-AB108
FUE MS-BX402
► Also See:
Sirius Receiver pg 184
182
Marine Stereos
Fusion Amplifiers
Add more power to your marine speakers
by connecting a FUSION Marine
Amplifier to your audio system, or install
with a subwoofer to increase the bass level
of your music. Amplifiers feature anti-corrosion treated PCB's and
stainless steel end panels to maximize corrosion protection.
A 2 channel amplifier is used to power a subwoofer, increasing the
level of your audio system
• Dimensions (W) x (H) x (D) 220mm x 260mm x 57.5mm
• 65 Watts RMS per channel @ 4 Ohms
• 100 Watts RMS per channel @ 2 Ohms
• 200 Watts RMS Bridged channel @ 4 Ohms
FUE FM-402
2 channel, 400 watt
A 4 channel amplifier can be used to power two pairs of speakers
and a subwoofer.
• Dimensions (W) x (H) x (D) 220mm x 330mm x 57.5mm
• 65 Watts RMS per channel @ 4 Ohms
• 95 Watts RMS per channel @ 2 Ohms
• 200 Watts RMS Bridged channel x 2 @ 4 Ohms
FUE FM-504
4 channel, 500 watt
A Marine Zone Amplifier (MS-AM702) is needed if;
1) you are planning a multi-zoned marine audio system, comprising of
three or four zones
2) you are planning an audio system that has more than four pairs of speakers
1 zone system......1-4 pairs of speakers
1 zone system......More than 4 pairs of speakers
2 zone system......1-4 pairs of speakers
2 zone system......More than 4 pairs of speakers
3 zone system
4 zone system
Fusion Zone Amplifier
The Zone Amplifier is designed to support the
multi-zone technology of the marine stereo
unit. This amplifier is small, enabling discrete
installation and when combined with the
marine stereo unit provides the platform with a true multi-zone
audio system. Marine stereo units have the capability to run up to
four pairs of speakers.
You will also need to install a Marine Zone Amplifier if your sound
system has more than four pairs of speakers
• High Pass Crossover 60Hz–600Hz
• Max Power Rating (Watts): D-Class 70 Watts
• Operating Range 10 -16 volts DC
• Ratings per Channel 20 Watts RMS @ 4 ohms per channel: 33 Watts RMS @ 2 ohms per channel
• 2 Channel
• 2 Ohm Stable
• Water resistant design
• Conformal coated PCB
• Audio detect selectable function the amplifier turns on when
audio is detected and goes to sleep / low power mode when
audio is not present
• Selectable high pass/ full range setting
• Variable high pass filter
• Small and discrete size: 128 x 78 x 51mm
FUE MS-AM702
No zone amplifier needed
Zone amplifier needed
No zone amplifier needed
Zone amplifier needed
Zone amplifier needed
Zone amplifier needed
FUSION’s Marine Multi-Zone technology allows you to create a truly customised
audio solution, purpose built for your vessel.
Creating multiple independent audio ‘Zones’, provides an entertainment solution
that everyone on board can enjoy - party with loud music on the fly bridge while
the girls relax below with quieter music in the saloon.
Control the audio settings for all Zones through the Marine Stereo, or
alternatively customise the audio system by installing a Wired Remote Control in
each zone of the vessel.
Fusion Stereo Cover
Fusion Remote Control Y Connector
Fully sealed waterproof cover with
a tinted polycarbonate front panel.
Compatible with dual shaft, Din &
removable Din size radios. Stainless
steel hardware included.
Enables the connection of multiple Marine
Remote Control (MS-WR100) to your 500 Series
Marine Stereo. Required to utilize Fusion’s
multi-zone technology when installing Wired
Remotes in each of your audio zones.
FUE F-MC
FUE MS-WR-100Y
Fusion Stereo Housing
Fully sealed body, waterproof cover
with a tinted polycarbonate front
panel. Compatible with dual shaft, Din
& removable Din size radios. Multi
angle bracket. Stainless steel hardware
included.
• D: 10.25", W: 9", H: 3.75"
FUE F-MH
Marine Stereos
Jensen Stereo Stereo & Speakers
Features:
• AM/FM with CD/CD-R/R
• 160 watts
• Conformal coated circuit boards
• Blue LED display
• UV stable faceplate
• Front auxiliary input jack
• 10 Second CD ESP (Electronic Skip Protection)
• Weatherproof radio housing
• Spring loaded flip-up door
• Dimensions: 9-5/8" W x 4-3/8" H
Speakers:
• 6.5" coaxial speakers
• 60 watts
• One piece basket design
• Includes speaker mounting hardware package
JEN CPM510
Jensen Marine Stereo & Speakers
• AM/FM/SIRIUS Ready
• Storage pocket with AUX input
Positive LCD display; waterproof face
• Sirius satellite ready (tuner sold
separately)
• 160 watts (40W x 4)
• MSR180 stereo/AMS602B speakers
JEN MSR180RTL
Jensen Marine Modular Stereo
Forget the weatherproof housing, this
modular design consists of a compact full
function, waterproof commander (IPX6
rated) with compact, high tech styling
and a remotely mounted tuner/amp unit.
Conformal coated circuit boards, rubber
keypad controls and UV resistant front
panel resist harsh marine conditions such as humidity, salt air, and
moisture and fight corrosion.
• AM/FM/iPod Ready/Sirius Ready
• 200W power
• USB feature allows connection of jump drives
• 1.0 gigabyte of on board memory for music storage
• Separate waterproof (IPX5) tuner/amp module can be remotely
located
• Sirius satellite radio ready (tuner sold separately)
• Full iPod controls (adapter cable sold separately)
• Zero memory current draw
• Dot matrix positive LCD display with blue backlight
• US/Euro frequency
• Wired remote ready
Jensen Marine Stereo
• AM/FM/CD/iPod Ready/ Sirius Ready
• 160 watts
• Sirius satellite ready (tuner sold
separately)
• Full iPod controls (adapter cable
sold separately)
• Plays CD-A/CD-R/RW
• 40 second CD electronic skip protection (ESP)
• Zero memory current draw
• Dot matrix positive LCD display with blue backlight
JEN MSR3007
Accessories:
JEN JIPDCBL12
iPod adapter cable
Jensen Marine Stereo
• The MSR7007 is unlike anything the marine industry has ever
been offered. This unit combines
the latest cutting edge audio
features in a waterproof marine
design and is developed from the
ground up to meet the unique
needs of the industry.
• AM/FM/CD Player/iPod Ready/Sirius Ready
• 200W output power (MOSEF)
• Waterproof faceplate (IPX5) and water resistant/sealed chassis
• 40 seconds electronic skip protection (CD)
• MP3/WMA compatible
• Radio broadcast data system
• NOAA weatherband with weather alert
• Wired remote ready (MWR75, MWR100, and MRF27)
• Multiple line LCD display
• Rear aux-in, pre-amp output
• Low battery (voltage) warning
• Zero current memory draw
• 1 DIN chassis
JEN MSR7007
Accessories:
JEN JIPDCBL12
iPod adapter cable
JEN MSR2107
Accessories:
JEN JIPDCBL12
183
iPod adapter cable
► Also See:
Sirius Receiver pg 184
184
Marine Stereos / Sirius Receiver
Jensen Marine Speakers
• 150 watts peak (50W RMS)
• Conforms to ASTM B117
standard for salt and
moisture resistance
• Certified to be ignition
protected in accordance with
US Coast Guard standard 33CFR183.410
• Flush mount speaker with UV stable plastic grille
• Magnetically shielded to prevent disruption of marine
instrumentation
• Marine grade 6-1/2” polypropylene woofer cone w/ UV
resistant polymer material to resist cracking and discoloration
• 19mm soft dome tweeter
• Gold plated speaker terminals and stainless steel hardware
• 11 oz. magnet
• Usable frequency: 50Hz-20kHz
• Sensitivity: 91 dB
• Impedance: 4 Ohms
• Mounting Depth: 3-7/16”
JEN MS6501
6-1/2"
Jensen Dual Cone Marine Speakers
• 150 watts peak (50W RMS)
• Conforms to ASTM B117
standard for salt and
moisture resistance
• Certified to be ignition
protected in accordance with
US Coast Guard standard
33CFR183.410
• Flush mount speaker with
UV stable plastic grille
• Magnetically shielded to prevent disruption of marine
instrumentation
• Marine grade 6-1/2” polypropylene woofer cone w/ UV
resistant polymer material to resist cracking and discoloration
• 19mm soft dome tweeter
• Gold plated speaker terminals and stainless steel hardware
• 11 oz. magnet
• Usable frequency: 50Hz-20kHz
• Sensitivity: 91 dB
• Impedance: 4 Ohms
• Mounting Depth: 3-7/16”
JEN MS6151DC
6-1/2"
Jensen
Sirius Receiver Generation 3
• New Sirius 3.0 technology
• Includes mounting hardware and 15'
data cable
• Two-wire hookup: antenna and data
cable
JEN SCC1BL
*Antenna Sold Separately
► Also See:
Sirius Antenna pg 203
Jensen AM/FM Antenna
Rubber mast antenna.
JEN 118-1067
Jensen Waterproof Marine Housing
A gimbal mount, water resistant
housing unit for securing standard
DIN marine stereo systems. The
unit is developed for easy universal
installation, reliability, and precise
fit. Extra side pocket for iPod or MP3
player.
JEN MGH300
Jensen Weatherproof Marine Housing
A weatherproof housing designed
specifically for marine use. Features a
spring loaded, flip-up door with a smoke
coloured window. Support self in rear of
housing for greater stability.
• W: 9-5/8” x H:4-3/8”
JEN MRH211W
JEN MRH211B
White
Black
Jensen Aux, MP3 Input & Accessories
Connect your iPod/MP3 player to your Jensen stereo.
JEN JPORT
Y connector
JEN MWRCYBL
17' Remote extension cable
JEN MWREXT
USB & auxiliary audio input jack
JEN JENAUX
Speakers / Intercoms
Shakespeare 2-1/4" External Speaker
• Mylar cone in a compact white housing
• 4-ohm. speaker for input power of up to 5
watts (RMS)
• Comes with a ratchet action mounting
bracket, hardware mounting kit and six
feet of cable with "mini phone" plug
installed
SHA ES-2
Shakespeare Deluxe External Speakers
• A four-inch, 4-ohm, speaker with Mylar
cone and white plastic cabinet
• Maximum input power is 8 watts (RMS)
• Comes with a swivel mounting bracket,
hardware mounting kit and six feet of cable
with “mini-phone” plug installed
SHA ES-4
ES-4P Same features as the ES-4 but with a built-in
amplifier with volume, tone control and a switchable
attenuator.
SHA ES-4P
Shakespeare Hailer Speaker
• 5" External hailer speaker
• White plastic horn speaker rated at 4 ohms
• 15 watts (RMS) input
SHA HS-5
Wesmar Hailer Speakers
• Weatherproof design, stainless steel
hardware
• ABS plastic construction
• 8 Ohm, 30W Rms, 40W peak
• Vertical adjustable
• Dimensions: W: 8" x H: 4-3/4" x D: 9-1/2"
WES SPC15RP
• Weatherproof design with stainless steel
hardware
• ABS plastic construction (off white)
• 8 Ohm, 40W Rms, 40W peak
• Metal mount with vertical and horizontal
adjustment
• Can be flush mounted
• Dimensions: W: 6.5" x H: 11" x D: 8-1/2"
WES SPC40RP
185
Sailing Specialties VHF Storage Box
• Acrylic capped ABS lockable box
• Stainless steel hinge
• Starboard door with S/S door restraint
• Lockable slam latch
• 9-3/8” W x 12-3/4” H x 11-1/4” H
SSI 47605000
Sea-Dog Microphone Clip
• 304 Stainless steel
• 1-7/8" x 1"
SED 329990-1
Newmar Intercoms
The PI-10 model is offered for larger
vessels where multiple station calling
capability is desired. With the PI-10 system
in place, communication can take place
between up to 10 different stations. Any
station can be individually selected and
called by any other station. The phone
base features 10 numbered call-buttons
and a label is provided for identifying
the different stations. The PI-10 model is
sold individually so that the system can be sized to
requirements. 12 volt power source required.
NEW PI-10-BLACK
NEW PI-10-WHITE
Newmar Intercom Sets
A two station, 12 volt intercom system makes for
simple communication between the bridge, galley,
engine room or staterooms. The system comes
complete with 2 intercoms, 40' of hook-up wire and
all the necessary hardware.
NEW PI-2SET-BLK
NEW PI-2-SET-IVY
NEW PI-2-BLACK
Black, 2-station set
Ivory, 2-station set
Black, phone only
Interconnect Wire
For PI-2 (2 station) systems, use 5 conductor wire. (Included
in PI-2 set.) For Multi -Station systems, use 15 conductor wire.
Minimum recommended wire: 22 AWG.
• Sold per foot
NEW 22-15
15 conductor (22-15)
188
VHF Radios / CB Radio
Uniden Solara DSC VHF Radio
• All channel scan
• USA/International/Canadian
marine channels
• DSC capability including
distress and individual calling
• Submersible - meets the JIS7
standards
• Rubber gripped microphone
• NOAA weather channels
• Large backlit display for enhanced night vision
• 3 year water protection warranty
UNI SOLARA-DSC
UNI SOLARA-DSC-BK
White
Black
Accessories:
UNI FMB322B
UNI FMB322W
Flush mount faceplate, black
Flush mount faceplate, white
Uniden UM-415 VHF Radio
• All USA, Canadian and international
marine channels
• Rugged speaker microphone with
channel, up/down, scan and 16/9 keys
• S.A.M.E. emergency/weather alert
• 1/25 watt transmit power
• Class D DSC
• Easy-to-use intuitive menus in full dot matrix display
• Large backlit display for enhanced night vision
• Programmable channel scan means you never miss a call
• 10 weather channels
• NMEA0183 input and output
• Operating temperature range: -20°c To +50°c (-4°f To +122°f)
• External speaker capable (40 ohm)
• Size: 6.25" W x 2.5" H x 6.0" D
• 3 year warranty protection
UNI UM-415
UNI UM-415
White
Black
Uniden Whamx4 Wireless Remote
• Compatible with the UM-Series
• Full function wireless 2.4GHz
• Add up to 4 remotes
• Full intercom with up to two radio stations
• Call wham to wham up to .5 Miles apart
• DSC (digital selective calling)
• Inductive charging - no metal contacts to corrode
• S.A.M.E. Weather alert - specific area message encoding
• Accepts optional VOX headset
• Triple Watch Plus
• 2-Way hailer control
• Rechargeable NiMH battery and charger included
• JIS7 rated, completely submersible
• 3 year water protection warranty
• Belt clip included
UNI WHAM-4
UNI WHAM-4BK
White
Black
Parts:
UNI BBTY0566001
Battery pack
Uniden UM-425 VHF Radio
• Ultra compact construction saves
valuable space and allows for
convenient mounting
• Full dot matrix display with easy-to-use
intuitive menus
• All USA/International/Canadian
marine channels
• DSC Including distress button, position send and request
• Quik Command One-Touch Ch 16/9 Key on Mic
• Backlit keypad - is easy to use in low-light
• Triple Watch Plus monitor emergency channel 16 and 9
• User can assign names to all marine channels for quicker
reference
• Memory scan - scans all channels saved in memory
• Weather alert - NOAA weather signal
• Public address - one switch allows you to select PA or normal
marine radio operations
• JIS7 Rated - completely submersible
• 3 year water protection warranty
UNI UM-425
UNI UM-425-BK
White
Black
Furuno VHF Radio
• All U.S., international channels and
NOAA weather channels available
• Easy channel selection with large
rotary control
• Triple watch on selected channel while monitoring channel 16 and 70
• DSC
• Quick access to channel 16/9 key
• Add a second station by adding the FM3010 remote mic.
FUR FM-3000
Accessories:
FUR FM-3010
FUR FM-3040
2nd station mic
Flush mount kit
Uniden PRO 510-XL CB Radio
• Channel display
• Automatic noise limiter
• 4 Segment LED S/RF meter
• Adjustable squelch & volume
UNI PRO 510-XL
VHF Radios
Uniden MHS-125 VHF Radio
• Rugged chassis
• JIS 8
• Strobe light
• Floats
• Includes 1000 mAh battery
• Includes alkaline battery tray
• AC, DC chargers and charger cradle
• 3 year water protection warranty
UNI MHS-125
Grey
Uniden MHS-75 VHF Radio
The durable MHS75 VHF Handheld Radio from
Uniden offers a compact design and is rated JIS8
submersible. Offering superior receiver performance,
the MHS75 VHF Handheld Radio features dual, trip
and quad watch, memory channel scan and weather
alert function.
• Compact design
• JIS8 submersible
• Dual/triple/quad watch
• Memory channel scan
• Weather alert
• DC clip-on charger
• Runs 11 hours on rechargeable lithium ion battery
(included)
• 3 year water protection warranty
UNI MHS-75
Uniden Atlantis-250 VHF Radio
• USA/International & Canadian marine channels
• JIS4/CFR46 waterproof level
• 1/5 watt switchable
• Ni-MH and alkaline battery capability
• Instant channel 16/9/Triple watch
• Back lit L.C.D. display & key pad
• N.O.A.A. weather channels with weather alert
• Memory channel scan
• Comes complete with AC/DC charger
• 3 year water protection warranty
UNI ATLANTIS-250G
UNI ATLANTIS250BK
Grey
Black
Accessories:
UNI BADG0892-001
UNI BP-250
UNI BP-250BK
UNI HHSPM
UNI BATY0467-001
UNI BHATL250-BK
UNI PCLTD
AC adaptor-Atlantis-250
Battery pack, BP250
Battery pack, 250BK
Speaker microphone
Antenna, black
Battery holder
DC adapter
189
Uniden Voyager VHF Radio
Worlds smallest portable VHF radio is durable, reliable
and made for any marine activity
• AC & DC adapter and charging cradle included
• Meets JIS7 waterproof specifications
• Lithium-ion battery
• Rubber grips/seal
• N.O.A.A. Weather channels with weather alert
• S.A.M.E. Weather alert - specific area message
encoding
• Triple watch plus - allows you to monitor emergency channel
16 and 9, another user selectable channel plus weather alert
• USA/International/Canadian marine channels
• 1/5 Watt transmit power
• Memory scan
• Optional speaker/microphone
• 3 year water protection warranty
UNI VOYAGER
Accessories:
UNI BP-VOY
UNI HHSPM
UNI BATG0478-001
UNI HH-VTA-85
Battery pack
Speaker microphone
Antenna
Drop in charger
Uniden MHS-350 VHF Radio
Features a huge LCD display housed in a die-cast
aluminum case.
• USA, International and CDN marine channels
• NOAA Emergency/Weather Alert with S.A.M.E.
• 1/5 watt power settings
• JIS7 submersible rated and designed to get wet ­
• Two 1100 mAH batteries for up to 28 hours of
operation
• Triple Watch/Programmable Scan
• Unique rubber grip design that won’t slip
• 3 year warranty
UNI MHS350
Accessories:
UNI BBTY0513001 Battery pack
VHF
Low-loss ethafoam spacer for
strong mechanical support
Exclusive white fiberglass seals
out moisture to prevent corrosion
Rugged, high-gloss, non-yellowing
finish assures long-lasting beauty
High-quality, silver-plated brass
outer element for extended life,
maximum efficiency and superior
mechanical strength
Low-loss polyethylene
dielectric
Stainless steel ferrule
resists corrosion
Flexible coax that has higher power capabilities,
less loss per foot, UV stable jacketing, stranded
copper core, and copper shielding to help
maximize antenna performance
AM/FM
Ultra efficient, silver-plated
brass choking sleeve
suppresses cable radiation
for maximum on-air signal
CELLULAR
D ependability
Stranded, high-quality tinned
copper inner conductor
maximizes signal strength
HF/SSB
P erformance
CB
R eliability
l a ility
MARINE TV
E ntertaining
SATELLITE RADIO
S trength
www.shakespeare-marine.com
Antennas
191
Shakespeare Antenna Considerations
What boat? In choosing an antenna for your boat, the first consideration is the boat itself, as well as what type of boating you do with it. If yours is
a simple fishing boat that would be dwarfed by a 23-foot antenna, then of course the longer, better, higher-gain antennas are out of the question.
If yours is one of the luxurious boats with the multiple decks, then that 23-footer might not even do. Remember, though, that the important
consideration is not just the size of the boat, but what you do with it. If you never take your 90-footer out of Lake Fishbitten, then you don’t need a
huge antenna, after all. And it’s not likely that you’ll take your bass boat Pacific island hopping.
What kind of boating do you do? How much range do you really need from your radio? The farther you venture from shore the longer reach you’ll
need from your radio - and thus from your antenna - to communicate with base stations like the Coast Guard. The farther out you go, the farther you
have to reach to communicate with other boats, too. If yours is a fishing vessel, and you need to communicate with others in your fleet who are some
distance away, you’ll need a large antenna, high up. For VHF, output power is limited to 25 watts. So, the antenna has to “reach” with its antenna
gain, a function of antenna height, length, and quality.
Antenna Gain Shakespeare’s VHF antennas come in gain categories, like 3dB, 9dB, etc. This is a measure of how efficient the antenna is with the
signal you feed it, but it depends a great deal on the length of the antenna. The gain of an antenna is stated in decibels (dB) of effective radiated
power. Gain is an increase (or even a decrease) in ERP. You do not get antenna gain from any so-called amplifiers built into the antenna, and it does
not mean you can put more than the maximum legal 25 watts into a VHF antenna. You only get dB gain from longer, more efficient antennas. High
gain factors are 6dB, 9dB, and thereabouts. Unity means no antenna gain - a multiplier of “one.”
Shakespeare Emergency VHF Antenna
Stores itself in a yellow, metal tube that hangs up
where it's handy. The tube becomes part of the mount
when you set up the antenna. Includes 20' of RG-174
mini coax with a PL-259 connector.
• Self-contained
• Convenient hanger for easy storage
• Sealed, tin-plated copper wire coil
• One section
• Built-in mount
• Closed 9" long, open 16"
SHA 5910
Shakespeare 36" Stainless Steel Skinny Mini
VHF Antenna
This compact, lightweight antenna is ideal for vessels where space
is limited - bass boats and fishing vessels, for example. Its chrome
plated brass canister minimizes de-tuning. Cable and PL-259
connector included.
• VHF marine band 3dB
• 3 foot stainless steel whip
• Sealed, tin-plated copper wire coil
• Requires mount with centre hole for passage of the
supplied 15' RG-58 cable
• One section
SHA 5250
Shakespeare The Stowaway Emergency
VHF Flex Antenna 1/4 Wave Whip
Comes packed in a 12” weather-resistant,
plastic tube which can “stow away” in an
easy-to-reach location for instant emergency
capability if your main antenna becomes
broken or disabled. Complete with 12’ cable,
connector, and rubber suction cup for fast,
easy mounting to any smooth horizontal
surface.
• Flexible vinyl outer covering
• 10” overall length
• Velcro strips for storage included
SHA 5911
Shakespeare Sailboat Racers VHF Antenna
• Super light-weight black stainless steel antenna
• Gold-plated connector
• End-fed, center-loaded design
• Black L-bracket included for mast mounting
• One 15" section
SHA 5216
Skinny Mini VHF AIS Antenna
Designed to meet the broader bandwidth requirements
of all popular AIS transceivers, this antenna mounts
with ease. Its compact size will be welcome aboard
any vessel. Chrome plated brass canister minimizes
de-tuning.
• Built for AIS transceivers
SHA 5250-AIS
Shakespeare 36" Low Profile End-Fed
1/2 Wave VHF Antennas
The perfect choice for bass boats, centre console fishing
boats, or any vessel where compact size is most important.
Comes with a standard-duty stainless steel whip. Chrome
plated brass canister minimizes de-tuning.
• Sealed, tin-plated copper wirecoil
• Requires mount with centre hole for passage of the
supplied 15’ RG-58 cable. PL-259 connector included
• Stainless steel whip
SHA 5240-R
SHA 5241-R
Standard whip
Heavy duty whip
192
VHF Antennas
Shakespeare 36" Squatty Body End-Fed
1/2 Wave VHF Antennas
Shakespeare 8' Collinear Phased
5/8 Wave VHF Antenna
A favourite with sailboat owners, this light weight, low
profile, stainless steel antenna was specially designed for
masthead mounting.
• Hermetically sealed, tin-plated copper wire coil
• Stainless steel body and whip
• SO-239 connector
• Mount: Stainless steel “L” bracket (supplied)
A favourite of maritime professionals, this rugged antenna
boasts an extra heavy-duty radome and powerful internal
elements for reliable service day after day under the most
demanding conditions.
• Brass and copper elements
• Chrome-plated brass ferrule with 1”-14 thread
• Includes a PL-259 connect & 20' RG58 cable
• One section
SHA 5215
Same features as the 5215 but comes complete with 60' of
low-loss RG-8/X cable and a PL259 connector
SHA 5215C-X
SHA 5215L/BRKT
“L” Bracket for 5215
Shakespeare 36" Low Profile End-Fed 1/2 Wave
HD Lift-n-Lay Whip VHF Antenna
A 3dB base load antenna with a threefoot stainless steel whip that Lifts ‘n
Lays down, out of the way, for fishing,
trailering, boat covers, or storage. The
Lift-n-Lay feature makes the antenna
extra easy to set up and lay down. Superb
value, performance, and convenience.
• Sealed, copper wire coil
• Extra heavy duty stainless steel whip
(36") minimizes flexing at high speeds
• Mounts by passing the antenna’s
SO-239 connector through horizontal
surfaces up to 1/2" thick
• Coax and PL-259 connector (sold
separately)
• L-bracket included for mast mounting.
• One section
SHA 5247A
Shakespeare 5' Centre-Fed 1/2 Wave
Coaxial Sleeve VHF Antenna
Shakespeare’s most economical 5’ antenna package.
A great, basic 3dB antenna for day-to-day cruising in
calm to moderate seas. The antenna has an integral
polycarbonate Lift-n-Lay mount for deck mounting,
and comes with a levelling plate and installation
hardware.
• Brass and copper elements
• Includes a PL-259 connect & 15' RG58 cable
• Integral deck mount
• One section
SHA 420
SHA 5202
Shakespeare5' Centre-Fed 1/2 Wave
Coaxial Sleeve VHF Antenna
Outstanding, basic 3dB antenna designed to reduce
signal fading in rough seas. This is probably the most
widely used antenna on Coast Guard vessels.
• Brass and copper elements
• Chrome-plated brass ferrule with 1”-14 thread
• Includes a PL-259 connect & 15' RG58 cable
• One section
SHA 396-1
Shakespeare 8' End-Fed w/ Matching Stub
VHF Antennas
An economical and lightweight, self-supporting antenna for
good communications where range is not the predominant
factor.
• Quality copper cable elements
• Chrome-plated brass ferrule with 1”-14 thread
• Includes a PL-259 connect & 15' RG58 cable
• One section
SHA 5206-C
Chrome brass ferrule
SHA 5206-N
Nylon ferrule
For matching CB antenna order SHA 5205
193
Antennas
Length
Gain
Max. Input
Watts
SWR Nominally
Bandwidth within
2.0:1 SWR
DC
Ground
Termination
SHA 420
5'
3dB
50
1.5:1 @ 156.8 MHz
5MHz
No
15' RG-58 cable
SHA 396-1
5'
3dB
50
1.5:1 @ 156.8 MHz
5MHz
No
15' RG-58 cable
SHA 5202
8'
6dB
50
1.5:1 @ 156.8 MHz
3MHz
Yes
20' RG-58 cable
SHA 5206-C & N
8'
6dB
50
1.3:1 @ 156.8 MHz
3MHz
No
15' RG-58 cable
SHA 5215
36"
3dB
50
1.5:1 @ 156.8 MHz
7MHz
No
SO-239
SHA 5215C-X
36"
3dB
50
1.5:1 @ 156.8 MHz
7MHz
No
60' RG-8X cable
SHA 5240-R
36"
3dB
50
1.5:1 @ 156.8 MHz
7MHz
No
15' RG-58 cable
SHA 5911
10"
Unity
25
N/A
N/A
Yes
12' Cable
Part #
Shakespeare Centennial Series VHF Antennas
The Centennial antennas have a high-gloss, polyurethane finish that won't turn yellow in the sun.
• Brass and copper elements
• Chrome-plated brass ferrule with 1”-14 thread
• Includes 15’ RG-58 cable and a PL-259 connector
• One 8' section
Part #
Type
Gain
Max. Input
SWR Nominally
Bandwidth
DC Ground
SHA 5101
End-fed with matching stub
6dB
50 Watts
1.5:1 @ 156.8 MHz
5MHz
Yes
SHA 5102
6db collinear phased 5/8-wave
6dB
50 Watts
1.5:1 @ 156.8 MHz
5MHz
No
PHASE III
In A Class by Itself
The new line of Phase III marine antennas has taken years of painstaking
development. The process entailed not just designing the antennas, but
also engineering the custom-made tools and equipment for manufacturing.
The result is the finest, highest performing series of marine antennas
Shakespeare have ever built.
Construction Goes High-Tech
Phase III antennas embody the ultimate in antenna design, construction
and performance. We intend them for discerning, tech-conscious boaters
who won't settle for less than the best, most versatile and most attractive
antennas. For highest electrical efficiency, performance, and longevity,
Phase III VHF and Cellular antennas start with silver-plated elements. They
also feature Shakespeare's unique low-angle radiation that puts your signal
where it matters most. All of our extra heavy-duty Phase III radomes are
completely foam-filled. This sophisticated technique, which is no easy feat
to manufacture, isolates the radiators from vibration and moisture for long,
dependable service. Antenna mounting has also been designed for more
versatility. Phase III's newly engineered ferrules accommodate a variety
of installation possibilities, including standard 1" - 14 thread mounts, and
strapping or clamping to a mast. The ferrule, its coupling ring, and the "N"
connector at the base allow the antennas to be quickly and easily installed
without re-routing your existing coax.
Lasting Luxury
Great design and innovative construction demanded high-end looks that
exemplify luxury and lasting beauty, while providing superb durability
and the very best in UV stability. Phase III antennas get under way with
a new Shakespeare gleaming white finish that is protected by our new,
proprietary, aircraft grade high-gloss clear coating. Our new ferrules and
fittings enhance the Phase III beauty with versatility and mirror-finished
stainless steel. We take pride in building these antennas with the utmost
attention to detail. Our skilled craftsmen hand assemble the antennas
individually, and they hand solder every electrical connection.
PHASE III VHF Antennas
• 4'
• 3 DB gain
• Center-fed 1/2 wave coaxial sleeve
PHA 6400
• 8'
• 6 DB gain
• Center-fed 5/8 wave coaxial sleeve
PHA 6225
PHASE III Cellular Antennas
PHA 6410
PHA 6237
4'
8'
PHASE III AM/FM Antennas
• 800/900 MHz and 1900MHz cellular
• Handles all digital, analog and PCS cellular bands
• Brass chocking sleeve eliminates pattern distortion
PHA 6420
PHA 6235
4'
8'
194
VHF Antennas
The Galaxy-XP Silver Series
Low-loss ethafoam spacer
Galaxy performance starts with innovative and
sophisticated electrical engineering. Then, highly skilled
Low-loss polyethylene dielectric
craftsmen hand assemble and hand finish each antenna,
Tinned copper inner conductor
using only the best materials.
Silver-plated brass outer element
Guaranteed
Galaxy quality comes with a quality
guarantee: five years.
Silver-plated brass choking sleeve
Stainless steel ferrule
Shakespeare Silver Series VHF Antennas
For the toughest of the tough jobs, Shakespeare introduces the extra edge of silver plated elements on worldrenowned, world class, Galaxy marine VHF antennas. It’s designed to withstand the wind forces and high
speeds when used on hard tops, T-tops, and radar arches. The antenna’s legendary Galaxy high-gloss finish
assures that it’s welcome aboard.
• Copper and silver plated brass elements for extraordinary range and efficiency
• Stainless steel ferrule with standard 1”-14 thread
• 20’ RG-8/X low-loss cable plus a PL-259 connector
• Maximum output is 150 watts
Type
Length
Gain
SWR Nominally
Bandwidth within
2.0:1 VSWR
DC Grounding
SHA 5225-XP
Collinear-phased
5/8 wave elements
8'
6dB
1.5: 1@ 156.8MHz
3 MHz
Yes
SHA 5400-XP
Center-fed 1/2 wave
coaxial sleeve
4'
3dB
1.5: 1@ 156.8MHz
3 MHz
No
Part #
Breakthrough Antenna
Technology
Shakespeare Galaxy Eliminator Series VHF Antennas
These antennas implement Shakespeare’s innovative filtering technology that helps
get pager and Out-of-Band interference under control in installations demanding taller,
higher-gain antennas. In busy radio areas like harbours, the antenna’s filter can make a big
difference in how much “RF garbage” you hear. Working with your radio’s own rejection
circuitry, it can actually improve the fidelity of your VHF radio.
• Greatly reduces pager and intermod interference
• Patented – special, high efficiency filter built-in
• Brass and copper elements
• Stainless steel ferrule with standard 1"-14-thread
• Includes 20' RG-8/X cable and a PL-259 connector
• Filter loss: less than 0.25dB
• Maximum input: 30 Watts
• Suggested mount: 409-R or 410-R mounting kit (sold separately)
Finish
Type
Length
Gain
DC Ground
SHA 5018-FLT
Part #
White
Phased 1/2 wave elements in a collinear array
17.5' in two sections
9dB
No
SHA 5225-FLT
White
Collinear phased 5/8 wave elements
8'
6dB
Yes
195
VHF Antennas
Shakespeare 4' Galaxy 'Little Giant'
3dB VHF Antenna
Shakespeare 4' Galaxy AIS 'Little Giant'
3dB VHF Antenna
Center-fed 1/2 wave coaxial sleeve. An outstanding, 4’
antenna of heavy-duty construction for general purpose
communications. It’s at home on T-tops, hard-tops and other
positions aloft, where its small size can deliver maximum
range.
• Brass and copper elements to maximize range
• Stainless steel ferrule w/ standard 1”-14 thread
• Includes 20’ RG-8/X cable and a PL-259 connector
Max. Power Input:......... 50 watts
SWR:.............................. Less than 1.5:1 at 156.8 MHz
Bandwidth:..................... 5 MHz within 2.0:1 VSWR
DC Grounding:.............. *No
Specially designed to meet the broader bandwidth
requirements of all popular AIS transceivers, Shakespeare’s
Galaxy Style 5396-AIS antenna features commercial-grade
fibreglass construction. It’s at home on T-tops, hard-tops and
other positions aloft, where its small size can deliver maximum
range.
• Center-fed 1/2 wave coaxial sleeve
• Brass and copper elements to maximize range
• Stainless steel ferrule w/ standard 1”-14 thread
• Includes 20’ RG-8/X cable and a PL-259 connector
Max. Power Input:......... 50 watts
SWR:.............................. Less than 1.5:1 at 156.8 MHz
Bandwidth:..................... 5 MHz within 2.0:1 VSWR
DC Grounding:.............. Yes
SHA 5400-XT
SHA 5396-AIS
Shakespeare Galaxy VHF Antennas
These professional quality antennas are
performance powerhouses. They are extra
strong – sturdy enough to be self-supporting,
even in high winds and high speeds.
• Brass and copper elements
• Stainless steel ferrule with standard 1”-14 thread
• 20’ RG-8/X low-loss cable plus a PL-259 connector
• SWR Nominally: 1.5:1 at 156.8 MHz
Part #
SHA 5018
SHA 5230
Bandwidth
DC
Ground
150
Watts
3 MHz
No
8dB
200
Watts
3 MHz
Yes
Type
Length
Gain
Phased 1/2 wave elements in a
collinear array with chocking sleeve
to suppress cable radiation
17' 6"
2-Section
9dB
14'
2-Section
5/8 wave over 1/2 wave dipole
Max.
Power
Mount
409-R
or
410-R
SHA 5309-R
Phased 1/2 wave elements in
collinear array with a band spread
matching sleeve and a choking stub
to suppress cable radiation
23'
2-Section
9dB
150
Watts
5 MHz
No
409-R
or
410-R
SHA 5399
Collinear-phased 5/8 wave with two
coaxial chokes to suppress cable
radiation
9' 6"
2-Section
6dB
100
Watts
3 MHz
Yes
4187-HD
or
452
Broadband VHF designed for
military, commercial, law
enforcement, and disaster
readiness. No tuning or ground
plane required
6'5"
1 Section
3.3-4.3
125
Watts
Maximized for
136-174 MHz
Yes
4187-HD
or
410-R
SHA HS-2774-1
FYI
Here is a formula for calculating the range of an antenna:
Square Root of Height (in feet) above water x 1.42 = Range in miles
Remember to perform the calculation for BOTH vessels, then add
the results to get the range between two vessels.
196
VHF / SSB Antennas
Shakespeare 2' Galaxy 3dB VHF Antenna
Low-profile, end-fed 1/2 wave. Designed especially for rigid
inflatables and other applications requiring a short overall
length, the black stainless steel whip has a helical design to
avoid excessive whipping. A unique solderless connector at
the base provides for easy installation and removal.
• Durable all black finish
• “L” bracket mount supplied
• 20’ black RG-58 coax cable and a PL-259 connector
Max. Power Input:........ 50 watts
SWR:............................. less than 1.5:1 at 156.8 MHz
Bandwidth:.................... 6 MHz within 2.0:1 VSWR
Polarization:.................. Vertical
Impedance:.................... 50 ohms
SHA 5415
Shakespeare 8' Galaxy 'Extra Tough'
6dB VHF Antenna
Collinear-phased 5/8 wave elements
Shakespeare’s best – maximizes range and quality in a great
looking antenna. The new5225-XT is Shakespeare’s classic
Style 5225 in a new, stronger, stiffer radome. It’s extra tough
for use on hard tops, T-tops, radar arches, or wherever its extra
resistance to high winds and high speeds is welcome.
• Brass and copper elements
• Stainless steel ferrule with standard 1”-14 thread
• 20’ RG-8/X low-loss cable plus a PL-259 connector
• Twin to: Galaxy Style 5223 CB antenna
Max. Power Input:..........100 watts
SWR: . ............................nominally 1.5:1 at 156.8 MHz
Bandwidth:......................3 MHz within 2.0:1 VSWR
DC Grounding:...............*Yes
SHA 5225-XT. .............. White
SHA 5226-XT. .............. Black
Shakespeare 23' Commercial Ocean Twin
VHF Antenna
Phased 1/2-wave elements in a collinear array with
choking stub to suppress cable radiation and a
band spread matching sleeve. Its nine phased 1/2wave element, 23-foot design means long distance
communications. Includes 15' RG-58 cable and a PL-259
connector.
Two sections: Base 162" & Tip 114"
• Frequency:..........................VHF Marine band
• SWR:. .................................1.5:1 @156.8 MHz
• Impedance:.........................50 Ohms
• Gain:...................................9 dB
• Max. Input:.........................25 Watts
• DC Ground:........................NO
SHA 5208-R
Shakespeare 3' Little Giant
CB Antennas
Great for bass boats and other boats where fishing
over a short antenna is more desirable than greater
range. Coil is permanently sealed in Shakespeare
white fibreglass. Includes 7' cable and a PL-259
connector which can not be cut or altered but
can be lengthened with suitable connectors and
extension coax (each sold separately)
• Frequency:............. 27 MHz Citizens Band
• SWR Nominally:... 2.0:1 or less @channel 19
• Unity Gain
• One section
• 4050-B Mount: Integral polycarbonate Lift ‘n
Lay mount with installation hardware
SHA 4050-B
SHA 4051
4050-B
4051
Polycarbonate Lift-n-Lay Mount
Nylon ferrule with standard 1in-14 thread
Shakespeare 23' Commercial Ocean Twin
SSB Antenna
This award-winning performer is often referred to as “the
standard of the industry” by virtue of its capabilities and
popularity. Conductors run the full length of antenna (no
loading coil).
• Chrome-plated brass ferrules
• Side feed termination band
• Maximum input:...................1 kW
• Bandwidth. ...........................10.8 MHz
• Frequency:............................2-30 MHz w/ tuner
• Suggested mount:.................409 or 410
• 23' in two sections:...............Base 162” & Tip 112”
SHA 390
Shakespeare 23' Commercial Ocean Twin
SSB Antenna
A rugged performer for day to day communications.
Conductors run the full length and are permanently sealed in
Shakespeare white fibreglass.
• Chrome-plated brass ferrules
• Side feed termination band
• Maximum input:.................1 kW
• Bandwidth. .........................10.8 MHz
• Frequency:..........................2-30 MHz w/ tuner
• Suggested mount:...............409 or 410
• 23' in two sections:.............Base 162” & Tip 114”
• Twin to: Style 5208 VHF
SHA 5308-R
SSB / CB / AM/FM / Cellular Antennas
Shakespeare 23' HF/SSB Whip Galaxy 'Style'
Antenna
Full-length conductors, no loading coil.
This hand-crafted antenna is a top performer for commercial
vessels, yachts and larger sportfishing boats. Easily handles
up to 1 kw input power.
• Brass and copper elements
• Stainless steel ferrule with standard 1”-14 thread
• Side feed termination band
• Suggested mount: Shakespeare Style 409 or 410
Mounting Kit (pictured mount not included)
• Two sections: Base 172”, Tip 105”
• Twin to: Galaxy Style 5309-A VHF
• Max. Power Input:..............1 kw
• Resonant frequency:...........10.8 MHz
• Frequency: .........................2-30 MHz with a tuner
197
Shakespeare 4' Galaxy Little Giant AM/FM
This Little Giant is in charge of the entertainment. Its
sturdy construction and outstanding performance make it
an excellent choice for T-tops, hard-tops and other elevated
mounting positions. Extra rigid, extra tough.
• Copper elements to maximize range
• Stainless steel ferrule with standard 1"-14 thread
• Includes 12' RG-62 cable with Motorola type plug
installed
• One section
SHA 5420-XT
SHA 5310-R
Shakespeare 8' Centennial Series AM/FM
Shakespeare 8' 'Salty Mate'
CB Antenna
AM/FM antenna puts high-end features where high-end does
the most good. When you’re far from your favourite stations,
this antenna helps bring them in loud and clear.
• Chrome-plated brass ferrule with 1”-14 thread
• Includes Motorola connector & 15' cable
• Coil is permanently sealed in Shakespeare’s
white fibreglass
• Includes 7' cable and PL-259 connector which
cannot be cut or altered but can be lengthened
with suitable connectors and 50-ohm coax
(sold separately)
• Utility Gain
• Maximum output:...... 25 Watts
• Frequency:................. 27 MHz Citizens band
• DC Ground:............... Yes
• Single section
• Chrome-plated brass ferrule with standard
1"-14 thread
SHA 5205
Shakespeare 3' AM/FM Antenna
This combination antenna features a distributive load
for super signal pulling power. The coil is permanently
sealed in Shakespeare’s white fibreglass.
• Includes 10’ RG-62 coax with Motorola plug
• Integrated Lift-n-Lay mount w/ hardware
• One section, 39” overall length
SHA 4350
Lift-n-Lay
Same as the 4350 above but with
1"-14 thread for standard mount.
SHA 4351
Shakespeare AM/FM Antenna
This innovative design lets you put an AM/FM
antenna on your boat where it won’t get in the way.
It is a clear tape with embedded antenna elements.
Its permanent adhesive strip lets you attach it
quickly and easily onto your boat’s windshield or
any smooth, nonmetallic surface. It comes with a
6’ cable and attached “Motorola type” plug.
SHA 4353
SHA 5120
Shakespeare Galaxy Dual Band
3dB Gain Cellular Antenna
5205/5207
800/900 MHz and 1900 MHz Cellular.
These antennas cover digital, analog and PCS cell phone
bands. Electrical connections are hand soldered for reliability.
Use one of Shakespeare’s CPA Series adapters to connect
your portable cell phone.
• Brass and copper elements to maximize range
• Stainless steel ferrule w/ standard 1”-14 thread
• Includes 25’ of Lo-Max cable & “TNC” connector
SWR: . .............. Less than 1.5:1 at 852.65 MHz;
Less than 1.5:1 at 1918.7 MHz;
Bandwidth:........ 96 MHz within 2.0:1 VSWR (800/900 MHz)
140 MHz within 2.0:1 VSWR (1900 MHz)
Frequency:......... Dual Band 800-900 MHz, 1800-1900 MHz
SHA 5410-XT
SHA 5237-XT*
4'
8'
* A brass choking sleeve eliminates pattern distortion due to
cable radiation.
198
Cellular / Wi Fi / Loran / CB / Antennas
Shakespeare 2' Galaxy 8dB Wi-Fi Antenna
Shakespeare CruiseNet Cellular Modem (Telus)
This Shakespeare Galaxy antenna brings Wi-Fi to the marine
environment. It features an N-type connector and a special
sleeve-collar ferrule design that accommodates larger
diameter coax. Moreover, should the antenna ever need to be
replaced, it can be done without rerunning the coax.
• 2.4 GHz band
• Hi-tech PCB copper elements
• Stainless steel 1"- 14 thread ferrule with special sleevecollar design
• One section
CruiseNet works just like the broadband connection at your home
or office. Once installed, just connect your laptop and you are up
and running, automatically connected to the high-speed cellular
network.
• Send e-mails, surf the net, check online weather, and more
right on your boat
• Send and receive e-mail
• Surf the net for online weather, news, and services
• Access remote surveillance and alarm systems
• Monitor your boat while you're away
• High-speed uploads and downloads
SHA 5248
Shakespeare 8' Navigator Loran Antenna
Fibreglass whip with chromed brass fitting, 3/8" - 24
male threads. Recommended by virtually all Loran
manufacturers.
SHA 4208
Shakespeare 8' 'Sea Mate' CB Antenna
SHA CN-1100T
Telus
• Dimensions: 4.6"L x 2.5"W x 1.4"H
• Weight: 0.7 lbs.
• Wireless WAN: EV-DO Rev. A with Fallback to EVDO Rev. 0 and CDMA 1x
• Host Interfaces: Ethernet 10/100 Mbps RJ-45, RS232 DB9 DCE (300-230400 baud)
All Cruisenet Systems include installation/activation instructions, quick-start
user guide and user manual, plus a one-year subscription to CruiseNet FullThrottle Web Accelerator Operates on 12 VDC ships power or 120 VAC, and
includes AC power adapters and DC wire harness. SMA-TNC adapters also
included. The CN-1100-T includes two detachable flex antennas.
This outstanding antenna can be tuned for minimum VSWR
and optimum performance. A VSWR meter ART-3 (sold
separately) is required for the tuning process.
• Continuous-loaded, end-fed 1/2-wave CB antenna
• Needs only 3/8" hole for passage of the coax
• Chrome-plated brass ferrule with standard 1in-14 thread
• Includes 15ft RG-58 cable, which can be cut to size, and a
PL-259 connector
• Gain: Utility
• Maximum output:...........25 Watts
• Frequency:......................27 MHz Citizens band
• DC Ground:....................Yes
• Suggested mount: Use a Style 410-R Mounting Kit and a
Style 4008 Extension Mast to form a 16ft antenna system
SHA 5207
With many types of mobile Internet access you must pay by the
minute or by the amount of data you send. Not so with the CruiseNet.
A flat monthly fee provides you unlimited, always-on, high-speed
access to the Internet, e-mail and instant messaging.
199
Antenna Accessories
Shakespeare Cell Phone Cables
Hook your cell phone up to ship’s antenna.
These cell phone adapter cables make the
connection.
SHA CPA-120
Motorola 3000, 6500, A1688, CD920, CD928,
DS8500, L2000, P8088, P8162, P8167, P8767, ST7760 ST7790,
ST7868, STAR TAC, T8167, Timeport Series (Flip type), V2088,
V3188, V3610, V3620, V3688, V8088, V8162
Shakespeare
AM/FM Marine Band Separator
Eliminate the need for separate AM/FM and
VHF antennas. As well operate your AM/FM
and VHF radio at the same time. Includes 10'
of RG-62 coaxial cable and 3' of RG-58 VHF
cable.
SHA 4357-S
For base loaded antennas such as the 5215, 5240-R, 5241-R. SHA CPA-123
LG 5200 Series, 5250, C-1500, VX-3200, VX4400, VX-4600, VX-6000, VX-6100, VX-6190, VX-6290, VX-7000,
VX-8000; for Motorola 120C, 120E, 120T, 120X, 182c, T190, T191,
T193, V200, V235, V265, V300, V400, V505, V551, V600, V710; for
Samsung SCH-1000, SCH-A310, SCH-A620, SCH-A670; for Nokia
3285i
SHA CPA-126
Shakespeare TV/AM/FM Stereo Band Separator
Complete with 12" cable and Motorola type plugs
for proper connections. Works with any 75 ohm.
TV antenna system.
Audiovox CDM-8900, CDM-8910; for LG
4-NE1, VX-2000, VX-4500; for Motorola T720, T720g, T720i, T730c,
T740; for Samsung SGH-E105; for Sanyo SCP-4700
SHA 4358
SHA CPA-128
Motorola T721
Shakespeare Cable Kits
SHA CPA-130
Nokia 232, 2110, 2120, 2160, 2190
SHA CPA-132
LG 110 Series, 510 Series, 520 Series,
DM510, TM510, V111 Series, VX-1, VX-10; for Nokia 3285, 5110,
5120, 5160, 5165, 5180, 5180i, 5185i, 6110, 6120, 6150, 6160,
6190, 6210, 6310, 6340, 6340i, 6360, 7110, 7160, 7170; for
Touchpoint 1100, 2200
Shakespeare Antenna Radio Tester
Unlike other meters in its class, the ART-3 tests receiver function as
well as output power and VSWR (antenna efficiency). It is powered
by an internal battery or can be connected to ships 12 VDC with the
supplied power cable. Battery level can be checked at the flip of a
switch.
• Frequency Range: 155-158 MHz
• RF Power Scale: 0 to 30 watts
• Impedance: 50 ohms
• Connectors: SO-239
• Tone: 1000 Hz
• RF Level: -115 dBM (approx.)
• Die-cast aluminum construction
SHA ART-3
Shakespeare Automatic Switch
This switch allows you to have two radios on
one antenna. It mounts out of the way. When
keying the microphone on one radio the AS-2
switches the antenna to it automatically.
SHA AS-2
Parts:
SHA 4079
1m RG-58 cable w/ connectors
► Also See:
Coaxial Connects pg 142
For longer cables runs, pick the appropriate length Shakespeare
SRC Series cable kit for your installation. Connectors come preinstalled on all cables. These cable kits must be run as a single
piece and cannot be joined together.
• 50 feet of marine grade RG-58
SHA SRC-25
SHA SRC-50
SHA SRC-90
25'
50'
90'
Coaxial Cable pg 109
► Also See:
Shakespeare Heavy Duty Extension Masts
Constructed of high quality white fibreglass and finished
to match the Galaxy series of antennas. These extensions
can be used to increase the height of the antenna, thus
improving effective range and boost placement of an
antenna above on-board obstructions. Stainless steel upper
and lower ferrules with standard 1" thread.
SHA 5228
SHA 5228-1
SHA 5228-4
8 ft. long - 1-1/2" dia
1 ft. long - 1" dia
4 ft. long - 1-1/2" dia
Sea-Dog Antenna Mount Extension
• Investment cast 316 stainless steel
• Standard 1"-#14 thread
Part #
Length
Diameter
Tube Wall
SED 329532-1
12"
1-1/16"
13/16"
SED 329536-1
24"
1-1/16"
13/16"
200
Antenna Mounts
Shakespeare Tube Mounted Antenna Base
Shakespeare Extension Accessories
• Heavy duty, chrome plated brass standoff
• Adjustable length 3 to 8"
• Use to clear overhang or other obstacles
Slip on to a 1" diameter pipe for a 1"-14 thread male
fitting. Can be used with any 1" O.D. stainless tubing.
Attaches easily with set screws.
SHA 4191
SHA 4705
1 foot, 1" thick white polycarbonate mast extension
for light to moderate duty applications.
Sea-Dog Tube Mounted Antenna Base
Investment cast 316 stainless steel. can be used with
any 1" O.D. stainless tubing allowing for custom
mount.
SHA 4364
SED 329520-1
Heavy duty stainless steel extension masts.
1"-14 thread male and female fittings.
SHA 4700
SHA 4700-1
SHA 4700-2
Sea-Dog Antenna Hook
6" Extension
1' Extension
2' Extension
Made from 304 Stainless Steel. This hook keeps
your antenna positioned in the lay down position
while your boat is not in use.
SED 329790-1
4700
Shakespeare Antenna Hook
Antenna stainless steel lay down hook.
J-shaped hook supports up to 1-1/2" dia. when in
lay down position.
4 foot moderate duty mast extension. Made from white
polycarbonate fittings. Standard
1"-14 thread, upper male, lower female.
Actual length 50".
SHA 4712
SHA 498
Shakespeare
Standoff Mounting Bracket
8 foot moderate duty mast extension. Needs a 410
mounting kit. Made from white polycarbonate fittings.
Standard 1"-14 thread, upper male, lower female. Actual
length 98".
A rugged, angled mast mount and stand-off
bracket in one. Fits all Shakespeare lowprofile, base-loaded antennas.
• Attaches easily to any flat, vertical surface
• Corrosion resistant black plastic
• Mounting screws not included
SHA 499
SHA 4716
4-1/2" stainless steel mast extension.
Standard 1"-14 thread.
Sea-Dog Antenna Standoff Bracket
SHA 4006
This bracket holds antennas in place
when running and also provides
additional support. Made from nylon
and comes complete with stainless steel
mounting hardware.
8 foot heavy duty mast extension. 1-1/2" dia.
extension mast of strong fibreglass. Use a 410
mounting kit. Chrome plated brass upper and lower
ferrules. Standard 1"-14 thread. Actual length 91".
SED 329780-1
SHA 4008
Same as 4008 but shorter. Actual length 50".
SHA 4008-4
Shakespeare Stand-Off Bracket
Insulated standoff bracket made of white moulded
plastic. Use on antennas of 1",
1-1/8" and 1-1/2" dia. Includes mounting hardware.
SHA 408-R
Antenna Mounts
Shakespeare Mounting Kits
Shakespeare Antenna Mount
Combines a versatile heavy duty swivel
mount base with a 408 standoff bracket.
• For antennas of 1", 1-1/8" and 1-1/2" dia.
• Chrome plated
• Includes mounting hardware
• Solid nylon
• Four-way ratchet design with handle
• For deck or bulkhead mounting
• Standard 1"-14 thread male threads
• For use with small antennas
The 4186 is not for use with antennas longer than
8' in self-supporting mode.
SHA 409-R
SHA 4186U
Combines a deck/side swivel mount base with
a moulded upper bracket.
• For antennas of 1", 1-1/8" and 1-1/2" dia.
• Includes mounting hardware
SHA 410-R
Shakespeare 4 Way Antenna Mount
Versatile 4 way action antenna mount that fits
almost any mounting location and permits
antenna lay down in desired direction. For deck
or side mounting when used with a standoff
bracket.
• Accept any antenna 1"-14 thread
SHA 407
Shakespeare Lift-N-Lay Mount
Positive snap action. Comes with levelling plate.
Standard 1''-14 thread. Has a 3/8"-24 thread brass
insert. Handles antennas to 8'. Polycarbonate.
SHA 495-B
Sea-Dog Antenna Mount
Injection molded nylon with dual swivelling
mounts for full adjustability. Open base design
allows the antenna wire to be fed directly through
the base eliminating the need for a cable outlet.
• Accept any antenna 1"-14 thread
• Use 1/4" F.H. screw
• W: 2-1/2" x L: 3-5/8" x H: 5-5/8"
SED 329100-1
Sea-Dog Antenna Mount
• Injection molded nylon ratchet
• Accept any antenna 1"-14 thread
• Use 1/4" F.H. screw
• W: 2-9/16" x L: 3-5/8" x H: 4-3/4"
• Colour - White
SED 329130-1
Sea-Dog Antenna Base
Die cast chrome plated zinc makes it the
affordable choice for fresh water environments.
Also designed with an integral feed system for
Loran cable.
• Accept any antenna 1"-14 thread
• Use 1/4" F.H. screw
• W: 2-1/8" x L: 3-5/8" x H: 4-3/4"
SED 329300-1
Sea-Dog Adjustable Antenna Mount
316 Investment Cast Stainless Steel. Dual
swivelling mounts allow for full adjustment. Has
integral feed system for Loran cable.
• Accept any antenna 1"-14 thread
• Use 1/4" F.H. screw
• W: 2-1/2" x L: 2-15/16" x H: 4-1/2"
SED 329230-1
Shakespeare Antenna Ratchet Mount
Stainless steel antenna base uses a four way
ratchet design with locking handle for deck or
side mount. Standard 1''-#14 thread, 9/32'' hole
for cable feed. HD version (with extra strength
and rigidity) was developed to accommodate the
Galaxy series antennas.
SHA 4187
SHA 4187HD
Sea-Dog Heavy Duty Deck Mounted
Antenna Mount
316 Investment cast stainless steel. This is a
heavy duty version of the above 329230. It has
been enhanced with extra height and weight.
• Accept any antenna 1"-14 thread
• Use 1/4" F.H. screw
• W: 2-1/4" x L: 3-3/4" x H: 5-15/16"
SED 329235-1
Shakespeare Antenna Ratchet Mount
• Stainless steel
• New designer look, four-way ratchet mount
• Its simple lines come from a nutless design
• Standard 1”-14 threads and a special cable
slot that eliminates removal of most factory
installed connectors
• Bolt holes: 5/16” dia,, 3” x 1-1/2" on centre
SHA 5187
201
202
Antenna Mounts
Shakespeare Rail Mount Antenna Base
Shakespeare Antenna Rail Mount
• Stainless steel
• Ratchet action for quick and easy installation
onto 7/8''-1'' railing
• For antennas up to 8' in length
• Standard 1''-14 thread
• 9/32'' hole for cable feed
Economy stainless steel rail mount. Comes
with adaptors to fit 7/8", 1 & 1-1/4" vertical
or horizontal rails. For use with standard
1"-14 thread antennas. Can also be mounted
on flat surfaces.
SHA 4190
SHA 4720
Sea-Dog Fixed Antenna Base
Shakespeare Rail Mount Antenna Base
• Stainless steel
• Ratchet action for quick and easy
installation on to 7/8''-1'' (4188S) or 1" to
1-1/2" (4188SL) railing
• For antennas up to 8' in length
• Standard 1''-14 thread
• 9/32"' hole for cable feed
SHA 4188S
SHA 4188SL
7/8" - 1"
1" - 1-1/2"
Shakespeare Nylon Ratchet Rail Mount
This sturdy plastic mount attaches to 7/8" and 1"
horizontal rails and has a side slot in the 1"-14
thread section for antennas with coax exiting the
bottom centre of their ferrule.
• Accommodates cable
• Accept any antenna 1"-14 thread
SHA 4722
Shakespeare Economy Nylon Ratchet Rail Mount
• Ratchet action for quick and easy
installation on to 7/8''-1'' railing
• Accept any antenna 1"-14 thread
SHA 4721
Sea-Dog Rail Mount Antenna Bracket
Made from injection molded nylon
and comes complete with stainless
steel screws.
Will fit rails 7/8" - 1", 3" high.
• Accept any antenna 1"-14 thread
• Accept any antenna 1"-14 thread
• Base diameter: 2-13/16"
• Use 1/4" RH fasteners
SED 329500-1
Shakespeare Flange Mount Nylon
• Low profile, 1" high mount
• Accept any antenna 1"-14 thread
• For GPS, marine TV and shorter antennas
SHA 4710
SHA 4711
Stainless steel
Nylon
Shakespeare Straight Antenna Base
• All stainless steel construction
• Accept any antenna 1"-14 thread
• 4" high
• Perfect for radar arches
• Can be used with a 4364 extension mast
• Use 1/4" fasteners
SHA 4365
Sea-Dog Straight Antenna Base
• All stainless steel construction
• Wire will feed through base
• Accept any antenna 1"-14 thread
• 4" high 2-7/8" base
• Use 1/4" fasteners
SED 329510-1
SED 327149-1
Shakespeare Mounting Shims
Sea-Dog Rail Mount Antenna Bracket
Shim kit for ratchet mounts consists of 4
shims, two each with front/back and side/side
slope. Each shim adds a half-notch (5°) tilt.
Stack them for extra height or for compound
angles.
Made from injection molded nylon
and comes complete with stainless
steel screws.
Will fit rails 7/8" - 1", 3-5/8" high.
• Accept any antenna 1"-14 thread
SHA 414
SED 327148-1
Shakespeare Sail Boat Mast Mount
Aluminum mast mount supplied with
a 1-1/4" thread fitting for either the
SeaWatch 2030 or 2020 antennas.
SHA 4366
Sea-Dog Antenna Adapter
This adapter allows the mounting of a 3/8"-24
thread Loran whip onto standard 1" base.
SED 329550-1
TV / Satellite Radio Antennas
Shakespeare SeaWatch 2025 14" Diameter
Omnidirectional Marine TV Antenna System With
Variable Gain Control
You get plenty of choices
with the omnidirectional
SeaWatch 2025 Marine
TV antenna system. Its
sophisticated design
lets you adjust its
amplification for best
picture quality. Crank up
the Gain to a full +20dB where the stations are weak, or attenuate
-10dB where the signals are strong. A convenient knob on its
control panel makes adjustment easy. The panel offers a wide
choice of mounting options. You can flush mount it, surface mount
it, or attach it to the set-top. You choose!
The Style 2025’s antenna head is as mechanically advanced as its
controller. Simply clamp it onto any 1" diameter pipe, extension
mast, or straight mount. As an added convenience, this sleek and
stylish Marine TV antenna also provides an Auxiliary Input for
Cable or Satellite. When the 2025 is turned off, the auxiliary input
is automatically connected to the TV. This unique and handy
feature eliminates the external “A/B” switches required by other
systems.
The 2025 comes complete with AC wall adaptor, 30' of ultra low
loss RG-59 coax and gold-plated, screw-on “F” connectors.
SHA 2025
Shakespeare
14" Diameter Omnidirectional Marine TV Antenna
The ideal smaller marine TV antenna where
styling and size are the predominant factors.
Perfect for close-in or stronger signal areas.
TV Antenna system includes antenna with
nylon ferrule, AC/DC switchable power
supply, 30' of ultra low loss RG-59 coax
cable, and gold plated screw-on "F" type connectors.
• Omnidirectional antennas capture VHF, UHF, and FM point of
the compass without aiming the antenna.
• 14-inch diameter
• Sleek and attractive
• 110vAC or 12/24 DC power
• Digital HDTV-ready
SHA 2020G
203
Shakespeare 21" Diameter Omnidirectional
Marine TV Antenna
Designed specifically for maximum
omnidirectional performance in the
marine environment. TV Antenna
system includes the antenna with
built-in 1"-14 thread nylon ferrule,
AC/DC switchable power supply,
30' of ultra low loss RG-59 coax
cable, and gold plated screw-on "F" type connectors.
• Omnidirectional antennas capture VHF, UHF, and FM point of
the compass without aiming the antenna.
• 21-inch diameter
• Sleek and attractive
• 110vAC or 12/24 DC power
• Digital HDTV-ready
SHA 2030G
Shakespeare Galaxy SRA-40
Satellite Radio Antenna
Digital Satellite Radio Antenna receives and amplifies
the satellite signal. At a tiny 3.5-inch diameter, it’s
ideal for smaller vessels. The low profile, white plastic
housing mounts in a variety of ways with or without
the included pedestal mount (pictured). When mounted directly to
the surface, the antenna accommodates surfaces up to 1 inch thick.
• 1.36” high (4" with pedestal)
• No separate power cable required
• 25-foot low-loss cable and connectors included
• White UV-stabilized ASA plastic housing
• 1 year limited warranty
SHA SRA-40
Includes SM31 mounting kit
Parts:
SHA SM30
SHA SM31
Surface mount kit
Pedestal mount kit (sold with the SRA-40)
Shakespeare Galaxy SRA-25
Satellite Radio Antenna
Specially designed for smaller boats that ply
inland waters, the SRA-25 sports an ultra-lowprofile. Tiny as it is, it delivers plenty: weather,
news, music, sports, and entertainment from
Sirius Satellite Radio. The versatile SRA-25
accommodates a variety of mounting methods,
with or without running its cable through the
mounting surface. Comes with a 25-foot RG174 cable. Attach to surfaces up to 1” thick via 9/16” diameter
threaded shaft, or use the included SM-32 Surface Mounting Kit
to secure the antenna to flat surfaces where access to the area
underneath is difficult or impossible.
• H: 3/4" x W: 2-3/8" x L: 2"
• No separate power cable required
• Single-cable design for newer receivers
• Shakespeare Limited Warranty: 1 year
SHA SRA-25
204
Radar Mounts
UV resistant ABS
plastic housing
Water tight gasket
Gore-Tex vent
Seaview Pod Display Housings
Anodized aluminum base
• Accommodate nearly all brands of marine electronics
• Fully adjustable mounting base for better viewing
• Can be mounted vertical or upside down
These Pods are constructed of high quality marine grade aluminum
base and UV resistant white ABS plastic housing. The Seaview Pod
Display Housings quickrelease handle feature allows for full adjustment
horizontally, vertically, with tilt and provides a clean, professional look
in your helm station. The unit’s gasket ensures a water-tight and secure
installation.
Pods carry a three year limited warranty.
Pre-cut for Displays
SVW PODW-2-RC80*
SVW PODW-4-RC120*
SVW PODW-3-RC90W*
SVW PODW-4-RC120W*
Raymarine E80 / C80 (white base)
Raymarine E120 / C120 (white base)
Raymarine C90W / E90W (white base)
Raymarine C120W / E120W (white base)
SVW PODW-2-G4008*
SVW PODW-4-G4012*
SVW PODW-2-G5008*
SVW PODW-4-G5012*
SVW PODW-4-G5015*
Garmin 4008 / 4208 (white base)
Garmin 4012 / 4212 (white base)
Garmin 5008 / 5208 (white base)
Garmin 5012 / 5212 (white base)
Garmin 5015 / 5215 (white base)
SVW PODW-3-FMFD8* Furuno MFD8 (white base)
SVW PODW-4-FMFD12* Furuno MFD12 / DCU12 (white base)
SVW PODW-4-FMU120* Furuno MU120C (white base)
SVW PODW-1-LHDS5*
SVW PODW-1-LHDS7*
SVW PODW-2-LHDS8*
SVW PODW-3-LHDS10*
Lowrance HDS 5 (white base)
Lowrance HDS 7 (white base)
Lowrance HDS 8 (white base)
Lowrance HDS 10 (white base)
SVW PODW-3-SNX40*
SVW PODW-4-SNX45*
Simrad Nx40 (white base)
Simrad Nx45 (white base)
SVW PODW-2-NM84*
SVW PODW-4-NM121*
Northstar M84 (white base)
Northstar M121 (white base)
*Request Items
Polished S/S quick
release handles
Radar Mounts
Seaview Standard Power Mounts
Power Mounts are constructed of high quality
marine grade aluminum and treated with an
epoxy primed then finished with brilliant
white powder coated finish. Each unit has a
waterproof radar cable gland positioned aft
Forward mount
and below the top plate.
• Mounts have a 7” x 7" base
• 20° Forward leaning
SVW PMF-5R-7
5" (Raymarine), Braodband BR24
SVW PMF-5U-7
5" Universal (Furuno, JRC/Northstar, Koden, Sitex, Lowrance, Simrad, Nobeltec, Maptech 12-20" & 24" domes)
Seaview Power Mounts Plus
w/ Light/GPS Bar option
All the same features as the Power
Mount but also accepts the optional:
Universal light/GPS bar (LTB), hinge
adapter, wedge or floodlight kit
• 20° AFT or FWD leaning profile
• Mounts with a 7” x 7" base
SVW PMA-5FJ-7L
SVW PMA-5R-7L
SVW PMA-5G-7L
SVW PMA-5U-7L
SVW PMA-5U-7
SVW PMA-5N-7L
SVW PMA-10R-7L
SVW PMA-10G-7L*
SVW PMA-10U-7L
SVW PMA-10N-7L
SVW PMF-10FJ-7L
SVW PMF-10U-7L
SVW PMA-16U-7L
SVW PMF-5R-7L*
Seaview Open Array Radar
Power Mounts
Fits 3-1/2' to 6' open array antenna.
Heavy-duty bolt-on light bar (LTBOA) is sold separately. Accepts all
Aft open array mount
power mount accessories.
w/ optional LTB-OA
• Mounts have a 8” x 8" base
• 20° Aft leaning profile
SVW PMA-6FO-8L* Open array (Furuno 4')
SVW PMA-6GO-8L* Open array (Garmin 4')
SVW PMA-6JO-8L Open array (JRC 4')
SVW PMA-6RO-8L Open array (Raymarine 4')
*Request Item
Seaview Satellite Pole Mounts
Aft mount shown
w/ optional LTB
5" (Furuno/JRC)
5" (Raymarine), Braodband BR24
5" (Garmin)
5" (Universal) +
5" (Universal)
5" (Simrad 18"-24", 25" Koden 25")
10" (Raymarine), Braodband BR24
10" (Garmin)
10" (Universal) +
10" (Simrad 18"-24", 25" Koden 25")
10" (Furuno/JRC 24"Dome)
10" (Universal)
16" (Universal)+
5" (Raymarine), Braodband BR24 20°
forward leaning
SVW PMF-10R-7L*
205
SVW AM-M3
3" diameter, 5" tall pole for
(KVH M2/M3, Ray 37STV, Sea Tel Coastal 14 & Sea-King 9815 RJ)
SVW AP4B1*
4" diameter, 12" tall pole for
(KVH 18", Ray 45STV, Sea Tel 20"-27"
& Sea-King 9818 RJ)
SVW AM-M5*
3" diameter, 5" tall pole for (KVH M5, Ray 45STV, Seatel 18"-27" & Seaking 18")
*Request Item
Seaview Satellite Power Mounts
Constructed with high quality marine grade
aluminum and treated with an epoxy primed then
finished with a brilliant white powder coated finish.
• 20° Aft leaning profile
SVW PMA-12-10B
10" (Raymarine), Braodband BR24 20° forward leaning
• Mounts with a 8” x 8" base
SVW PMA-24R-8L 24" (Raymarine), Braodband BR24
SVW PMA-24U-8L 24" (Universal) +
+ Universal: Furuno, JRC/Northstar, Koden, Sitex, Simrad
Lowrance, Nobeltec, Maptech 12-20" & 24")
12" (KVH 18", Ray 45STV,
SeaTel Coastal 14 & Sea-King 16")
SVW PMA-12-10M* 12" (KVH M2/M3, Ray STV,
SeaTel 20"-27" & Sea-King 9818 RJ)
SVW PMA-18-10B*
18" (KVH 18", Ray 45STV,
Sea Tel 20"-27" & Sea-King 9818 RJ)
SVW PMA-18-10M* 18" (KVH M2/M3, Ray STV,
SeaTel 20"-27" & Sea-King 9818 RJ)
*Request Item
*Request Items
Please ask for a 2010 SEAVIEW Catalogue
206
Radar Mounts
Seaview Satellite
Dual Power Mounts
• 20° Aft leaning profile
• Light bar sold separately
SVW PMA-DM1
Raymarine 45STV & KVH14, SeaTel, SeaKing
SVW PMA-DM1-M3* Fits most domes and KVH M2/M3, SeaTel Coastal 14, SeaKing 1500HD & Raymarine 37STV
SVW PMA-DM2*
Dual mount for open array
SVW PMA-DM2-M3* Dual mount for open array
*Request Items
12" to 18"
Universal +
For Raymarine, Garmin & , Braodband BR24
18" radars
24"
SVW SM-24-U
SVW SM-24-R
Universal
For Raymarine & Garmin 24" radars
25" to 28"
SVW SM-25-N
4° Radar wedges made from KingStarboard
plastic designed to be used directly between
the radome and the mounting surface when
extra height is not required . This will compensate for deck angle or
planing attitude of the boat.
SVW RW 4-1
SVW RW 4-2
SVW RW 4-6*
Furuno, JRC, Simrad, Koden, Lowrance, Sitex & Maptech 12-18" radomes
2kW/4kW Raymarine, Garmin & 4kW Nobeltec, Koden, Maptech, Sitex & Simrad
4kW Furuno, Northstar & JRC radomes
*Request Items
Seaview Power Mount Adapters & Accessories
Base Wedges:
Seaview Radar/Satcom Mast
Platforms
SVW SM-18-U
SVW SM-18-R
Seaview Radar Wedges
SVW PM-W2-7
SVW PM-W4-7
SVW PM-W6-7
2° for 7" x 7" base
4° for 7" x 7" base
6° for 7" x 7" base
SVW PM-W2-8
SVW PM-W4-8
SVW PM-W6-8
2° for 8" x 8" base
4° for 8" x 8" base
6° for 8" x 8" base
PM-H7
Hinged Adapters:
SVW PM-H7
SVW PM-H8
7" x 7" base for 5", 10" & 16" models
8" x 8" base for 24" & 36" models
SVW SV-KNOB Spare knob
For Koden 25" & Simrad 24" radars
LTB
LTB-100
+ Universal: Furuno, JRC/Northstar, Koden, Sitex, Simrad
Lowrance, Nobeltec, Maptech 12-20" & 24")
PM-1LT-DLX
Satellite Dome
SVW SM-18-A
Fits KVH 15"-18", Raymarine 37/45STV, SeaKing 9815/9818RJ & Sea Tel 15"-20") Trawler masts only.
Satcom Mast Platform
SVW SM-10-A
Fits KVH Tracphone/Fleet 33/
SeaTel Wave Call 3000
Seaview Low Profile
Satdome Adapters
Satellite adapters are constructed by Resin Transfer Molding, which
produces a high strength composite part. Each adapter is pre-drilled
to fit a complete range of Satcom/TV Antennas and is designed
with a small mounting base for installation in limited areas.
SVW AMA-10
10” (For Trac 252)
SVW AMA-16*
KVH M2/M3, Raymarine 37STV, Seaking 9815RJ / 1500HD, Seatel Coastal 14 & Intellian i3
18” (For KVH 18", Raymarine 45STV,
Sea Tel 20"-27" & Sea-King 9818RJ)
SVW AMA-18
SVW AMA-24
24” (For KVH 24" & Raymarine 60STV)
SVW AMA-GFX* 3" Tall Low Profile Satdome Adapter For SVW AMA-W
KVH M1, Intellian i1 / i2, Furuno Fleet 55 / Felcom 50 & All Glomex Sadomes
Adjustable wedge from 0°-12°
Light/GPS Bar:
SVW LTB
SVW LTB100
SVW LTB100-LED*
SVW DM-LTB
SVW DM-LTB-100*
SVW DM-LTB-BOX*
SVW LTB-OA
Light and/or GPS bar (no light included)
Light bar includes Perko 1197
masthead/all-round light
LED light bar
Light bar for all dual mounts
Light bar for all dual mounts, w/ Perko light
Light bar fits Aqua Series 40/41 light
Light bar f/open ray radar bracket
Flood Light Kit for LTB:
SVW PM-1LT-DLX
PM-U1A
4" x 6" halogen light & S/S mount
PM-U2A
LTB Adapters:
SVW PM-U1A
SVW PM-U2A
Dual mount adapter for light & GPS
Triple mount adapter for light & dual GPS
Please ask for a 2010 SEAVIEW Catalogue
Wind Instruments
Speedtech Windmates
Swiss-made impeller components, is water resistant,
shockproof and floats. For long-range shooting, the unit
can be tripod-mounted and uses the optional wind tunnel, Model
SM-WT for very precise measurements. All WindMates meet NIST
calibration standards and wind speed accuracy tested better than +/3%. 2-Year Warranty.
Common Features:
• Current, maximum wind speed
• Average wind speed over 5,10,13 seconds
• Choose any measurement unit
• Reads in tenths
• Replaceable 400-hr Lithium battery
• Easy to read LCD
• Threaded for tripod mounting
• Unique pocket-knife design to protect unit when not in use
• Comes with adjustable lanyard
• 2 year warranty
Specifications:
Accuracy: Wind +/- 3% when aligned with winds axis
Range: Wind .8-89 MPH
Response Times: Current & maximum wind 1-sec
Optional Units: Knots, MPH, KPH, Ft/Min, M/Sec, Beaufort
Power: CR2032 Lithium battery (included)
Measures: 5.5 x 1.75 x .75 (closed)
Weighs: 3.4 oz
WM-100 WindMate
Includes a wind vane to ensure accurate measurements
on the winds axis. Unlike other wind meters, the
jackknife case allows more precise wind speed readings
because the users hand is distant from the wind impeller,
which then measures undisturbed air flow.
SPT WM-100
WM-200 WindMate
All of the WM-100 features above plus:
• Windmeter with wind vane
• Fluxgate compass for digital wind direction
• Reads when held vertically
• Wind direction in degrees & compass points
• Calculates cross wind, head/tail wind
• Use as a bearing compass
• Temp & wind chill
• Backlight
SPT WM-200
WM-350 WindMate
All of the WM-200 features above plus:
Includes the Accuweather.com patented Comfort
Index, which is the effect of temp, wind speed, relative
humidity & sun intensity on the human body and is
superior to Heat Index.
• Swiss humidity sensor, lifetime calibrated
• Temp/windchill/relative humidity/
wet bulb/dew point/Delta T
SPT WM-350
207
Davis Wireless Vantage Vue
Weather Station
Accurate, reliable
weather monitoring
in a self-contained,
easy-to-install system.
Sleek but tough your outdoor sensor
suite sets up in minutes and starts sending data wirelessly to your
console. You'll see current weather conditions, including indoor
and outdoor temperature and humidity, barometric pressure, wind
speed and direction, dew point and rainfall. You'll also get weather
forecast icons, moon phase, sunrise/sunset times, graphing of
weather trends, alarms and more. Vantage Vue also boasts the
innovative Weather Centre button that displays additional data on
weather variables for today and over the last 25 days.
DIN 6250
Davis Weather Wizard III
Features include: inside and outside
temperature, wind direction, wind
speed, and wind chill. Highs and lows
are maintained for most functions,
and may be quickly viewed along
with the time and date they occurred.
Programmable alarms alert you to
changes in weather conditions. Information may be displayed in
U.S. or metric units of measure. Wind speed may be displayed in
either miles per hour, kilometres per hour, knots, or meters per
second. A reversible mounting base allows you to place the Weather
Wizard III on a desk, table or shelf, or to mount it on a wall. The
auto-scan routine reviews all weather conditions, or you may enter
your own scan selections. The Weather Wizard III comes complete
with anemometer with 40 feet of cable, external temperature sensor
with 25 feet of cable, junction box with 8 feet of cable, AC-power
adapter, mounting hardware, and detailed instruction book.
DIN 7425
Davis Wind Wizard
• Corrosion resistant construction
• Dial reads in: MPH (0-60), Meters/
Sec., and Beaufort
• Sapphire jewel bearing
• Folding handle
• Carry bag included
DIN 281
► Also See: Wind Instruments pg 167, 168, & 171
Davis Newport Tell-Tales
This wind direction indicator is a
practical sailing aid that attaches to
stays without tools. 360o free swing
that will not foul. Sold in pairs with
extra tails.
DIN 221
DIN 222
DIN 223
1/8"
3/16"
1/4"
208
Wind Instruments
Davis Air-Flow Tels
Davis Windex AV Wind Vane
Lightweight, rips top nylon. Easy-toread Tels attach to sails with waterproof
adhesive discs. Indicate maximum
performance trim on sails. Each kit
includes 14 Tels and full instructions on
where to apply and how to read them.
This complete kit allows you to install a
Windex 15” vane to any Shakespeare,
Metz or other brand whip antenna. Comes
with Teflon bearing washers,
adjustable stainless tacking arms
and reflectors underneath the tabs
and wind vane.
DIN 950
DIN 3160
Davis Windex 10 Wind Vane
Offers exceptional performance with
the sapphire jewel suspension bearing,
large fin-low inertia vane, and easy-toread, fully adjustable tacking tab system.
Reflector tape on the vane and tacking
tabs make it easy to see day and night.
Wind tunnel tested to wind speeds of
80 knots! Includes glass reinforced
polycarbonate J-Base for side, top or front of mast mounting on
most dinghies, smaller boats and sport boats. Stands just 9.25”
(23.5 cm) tall, 10” (25 cm) vane and weighs 1.2 ounces (31 g).
Davis Spar-Fly Wind Vane
Combines needle bearing balance,
high impact plastic and marine grade
metals for unsurpassed sensitivity and
durability. Bright red in colour. Comes
with both a top mount fitting and quick
release side mount.
DIN 1310
DIN 1311
Complete
Spare vane
DIN 3120
Spare Parts:
DIN 3101
DIN R3102
Davis Windex Offset Masthead Mount
10" Replacement vane
Reference tab for 3120
Davis Windex 15 Wind Vane
Offers exceptional performance with the
sapphire jewel suspension bearing, large
fin-low inertia vane, and easy-to-read,
fully adjustable tacking tab system. A
perfect choice for all cruising and racing boats 15
feet (4.6 meters) and bigger. Reflector tape on the
vane and tacking tabs make it easy to see. Wind
tunnel tested to wind speeds of 80 knots! Windex
15 has a 15” (38 cm) vane. Includes throughbolt or drill and tap mounting socket; 5/16” -18
stainless stud, washers and nut. Stands 12.75” (32 cm) tall and
weighs 3.6 ounces (101 g).
DIN 3150
Spare Parts:
DIN 3151
DIN R3150C
DIN R3152
15" Replacement vane
Reference tab only
Reference tab assembly
Davis Black Max Wind Direction Indicator
An extension base that mounts any Windex indicator away
from hardware at the masthead or for better visibility from
the deck. Boom provides 12" of extension and comes with
all the hardware necessary for top or side mounting. All
parts are aluminum or stainless steel.
DIN 1705
Davis Windex Light
A unique, non-dazzling lighting system that
allows "reading of the wind" at night. It mounts
directly onto the masthead fitting of the Windex
10 and 15. Completely waterproof with non-corroding, silver
parts. 12V.
DIN 3200
Lev-O-Gage Meters
Sailing Clinometers use flex-tube design and have
engraved white numerals.
LEV 7301-C
LEV 307-M
LEV 303-M
3.5", 45o Clinometer
3.5", 10o Lev-o-Gage II
6.5", 50o Senior
Improve your sailing with this high impact plastic
indicator. It comes with a stainless arm that quickly
attaches to your mast or boom. Designed to withstand
years of punishment. Comes with an unbreakable storage
tube for dry land storage.
DIN 1295
303-M
307-M
7301-C
Meters
Sea-Dog DC Voltmeter
• 8-16 DC voltmeter in a bakelite case
• Complete with mounting screws
• W: 2-13/16" x H: 2-3/8"
• 2-1/8" round cut-out
SED 421512-1
Sea-Dog Battery Test Switch
• Stamped anodized aluminum
• W: 3-1/4" x H: 2-1/2"
SED 422020-1
Sea-Dog Battery Monitor
This panel features an expanded scale,
simplified colour band meter for accurate
battery condition of two separate batteries.
Operation is controlled by a 3 position rocker
switch, allowing independent testing of either
battery. Comes complete with instructions and basic mounting
hardware. 12 volts DC.
• W: 5-1/4" x H: 3-3/4"
SED 423112
Blue Sea Systems DC Analog Ammeters
• Can be surface or flush mounted
• Simple 2-wire connection from shunt
• Meter senses and powers from shunt connection
• Packaged with shunt (except 8005 with internal shunt)
• W: 2.625" x H: 2.375"
BSS 8005
BSS 8022
BSS 8016
BSS 8017
BSS 8018
0-25 amp DC
0-50 amp DC
0-75 amp DC
0-100 amp DC
0-150 amp DC
Blue Sea Systems Analog DC Voltmeter
• Displays to .2 volt
• Draws only 1 milliamperes
• Accurate to 3% of scale range
• W: 2.625" x H: 2.375"
BSS 8003
BSS 8240
8-16 Volts DC
18-32 Volts DC
Blue Sea Systems AC Voltmeter
• 150 Volt dial marked in 50 increments
• Simple 2-wire connection
• W: 2.625" x H: 2.375"
BSS 9353 AC voltmeter
Blue Sea Systems AC Ammeter
• 50 Amp dial marked in 2 amp
increments
• Meter senses and powers from coil
slipped over wire to be measured
• Includes current transformer
• Simple 2-wire connection
• W: 2.625" x H: 2.375"
BSS 9630
Analog ammeter, 50A
Blue Sea Systems 3-Bank Voltage Monitor
• Standard 8-16 voltmeter
• 3.75 "H x 5.25" W panel
• Rotary switch to switch between 3
different battery banks
BSS 8015
Blue Sea Systems
3-Bank Digital DC Voltmeter
• Reads from 7-60 VDC
• Large easy to read red LED display w/
dimmer
• Meter senses and powers from same location
• Draws as little as 13 milliamperes
• Simple 3-wire installation
• Dimensions: 3.75" H x 5.25" W
BSS 8051
7-60 volt DC voltmeter
Blue Sea Systems
Meter Mounting Panels
Slate grey aluminum panels for mounting all
analog or digital meters. Exact colour and size
match to Blue Sea electrical panels.
BSS 8013
BSS 8014
Single 3-3/4"H x 5-1/4"W
Double 7-1/4" H x 5-1/4"W
209
210
Meters
Blue Sea Systems Digital Meters
New Spin-On Mounting System
• Surface mounts in a standard 2” (52 mm) round hole
• Panel mounts in any full size Blue Sea Systems’ electrical
panel meter cut-out
All digital series meters share the following features:
• 3 display brightness levels + off (sleep mode)
• Splash proof front
• Display character size: 9/16”
• Power consumption min. 0.60 Watt
• Power consumption max. 1.00 Watt
• W: 2.625" x H: 2.431"
Blue Sea Systems Digital Meters
AC Digital Ammeter
• Displays amps from 0 to 150 amps
• Includes current transformer
• Input voltage range 80 to 249 VAC*
BSS 8238
AC digital ammeter
AC Digital Frequency
Displays frequency from 40 to 90 Hz
BSS 8239
AC digital frequency
DC Digital Voltmeter
• Displays voltage from 7 to 60 volts
• 3 Display brightness levels & off
• Splash-proof front
BSS 8235
DC digital voltmeter
DC Digital Ammeter
• Displays amperage from -500 to +500 amps
• Standard meter operates in negative side of circuit only
• Input voltage 7-60VDC
• Includes 500 amp shunt
BSS 8236
DC digital ammeter
DC Digital Multimeter With Alarm
• Displays amperage from -500 to +500 amps
• Displays voltage from 7 to 60 volts in 0.01 volt increments
• User defined high and low voltage, audio and visual alarms
• Standard meter operates in negative side of circuit only
• Includes 500 amp shunt
BSS 8248
DC digital muti-meter
DC Digital Voltmeter With Alarm
• Displays voltage from 7 to 60 volts
• User defined high and low voltage audio and visual alarms
• Input voltage 7-60VDC
BSS 8251
DC digital voltmeter
AC Digital Voltmeter
• Displays voltage from 80 to 249 volts
• Input voltage range 80 to 249 VAC*
BSS 8237
AC digital voltmeter
AC Digital Multimeter With Alarm
• Displays amperage from 0 to 150 amps
• Displays voltage from 80 to 249 volts
• Displays power from 0-35 kilowatts
• Displays frequency from 40 to 90 hertz
• User defined high amperage audio and visual alarm
• Includes current transformer
BSS 8247
AC digital multi-meter
Meters / Shunts
211
Newmar Digital Monitors
BEP DC Digital Monitor
These digital instruments provide comprehensive monitoring of
voltage, current, power consumed, power available, AC frequency,
abnormal system conditions, and more. LCD displays are easily
read in bright sunlight and feature five level adjustable red backlighting for conservation of night vision. The meter/touch-pad and
surrounding 2-1/2" bezel are fully waterproof and the ABS housing
is UV stabilized.
Digital monitors are designed for easy
installation and offer full battery monitoring in
one gauge. Units can be fitted to a surface with
minimum protrusion or recessed into a panel.
• Voltage monitoring for 3 battery banks with custom selectable
legends. Eg. Start batt, house batt, radio batt.
• Charge and discharge amps (house bank only)
• Amp hours remaining (house bank only)
• Hi-low voltage alarms on 3 battery banks
• Low amp hour alarm
• Operating voltage 10-35vdc
• Software includes peukerts exponent
• Meter supplied with 450A-50mv shunt
• Suitable for monitoring amp hours on battery banks with a
capacity between 100 & 3000 amp hours.
AC Energy Monitor
• For 115/230 volt systems
• Reads: 90-300 VAC (True RMS), 0-150
amps, frequency from 40-70 Hz and power
from 0-45 kW
• Alarm circuits for high/low voltage and high/
low frequency
• Can be programmed to provide automatic generator shutdown
in the event that voltage or frequency exceed predetermined
range
• Current and voltage transformers are included
• 12/24V source required to power meter
NEW ACE
DC Energy Monitor
• Displays volts, amps, energy used and
remaining for 12/24V systems up to 500
amps and up to 3,000 amp-hour capacity
• Monitor voltage on up to three separate
banks
• House bank may be programmed for the
following functions:
1. Monitor charge/discharge amperage
2. Total energy monitor can be set for amp-hours or percent-of-charge
3. High/low voltage alarm, plus alarm set-point for low amp-
hours remaining
• 500 amp shunt included
• NMEA 0183 compatible output for data logging
NEW DCE
DC Voltmeter
• For three battery banks, 12 and/or 24 volt
systems
• Reads to the nearest 1/10 volt
• Programmable high/low voltage alarm
circuit for each bank
• NMEA 0183 compatible for PC interface
NEW DCV
Newmar Single Panel
Single Universal Panel; accommodates one 2 1/2"
analog meter or one Digital Instrument in frontmount configuration; can be oriented for either
horizontal or vertical mounting.
• 3-3/4" x 5-1/4"
NEW MPB-SU
BEP 600-DCM
BEP 600-DCM-5M
Monitor
Cable kit, 16.5'
Blue Sea Systems Shunt Shifter
• Shunt Adapter for DC digital ammeter
positive side shunt applications, such as
alternator measurement
• Designed for use with BSS 8255
• Advanced technology shifts the shunt’s
positive reference to negative as required by digital meters
• Installs directly onto shunt using existing sense screws
• Ideal for use with 12-36 volt DC systems
BSS 8242
Blue Sea Systems DC Shunts
Power all Blue Sea Systems external shunt
ammeters.
W: 1.75" x L: 3.25" x H: 1.75"
BSS 8255
BSS 9230
500 amp
100 amp
212
Battery Monitors
Xantrex
Linklite Battery Monitor
Defining the amount of energy available in a
battery is a complex task since battery age,
discharge current and temperature all influence
the actual battery capacity. High performance
measuring circuits, along with complex software algorithms, are
used to exactly determine the remaining battery capacity.
• Read your battery bank like a fuel gauge
• Provides critical information about the status of your battery
bank
• Displays voltage, current, consumed amp hours and remaining
battery capacity
• Secondary battery bank voltage monitoring
• Auto sensing battery voltage inputs
• Large backlit LCD Display
• Quick nut mounting construction
• Programmable alarm relay
• Shunt selection capability enables flexible system integration
• Splash proof front panel
• 500 Amp shunt included
• CE and e-mark certified
Blue Sea Systems
Vessel Systems Monitor VSM 422
• Three intuitive display modes
• Flexible case design offers three mounting
options
• Fully programmable legends and adjustable
alarm functions can be customized to fit
every boat
• Included in retail packaging—head unit,
surface mount bezel, surface mount gasket, DC Current Shunt
8255, AC Current Transformer 8256, Battery Temperature
Sensor 1820, connectors, and mounting screws
• Monitors DC systems—voltage, amperage, battery state of
charge - amp hours remaining, time remaining, % charge,
battery temperature (alarms for all values)
• Monitors AC systems—voltage, amperage, watts, frequency
(alarms for voltage, amperage, and frequency)
• Monitors tank levels—fuel, water, waste, (alarms for high level
waste, low level fuel, and water)
• Monitors bilge—active, cycle count, volume, duration (alarms
for cycles, volume, duration)
BSS 1800
XAN 84-2030-00
Xantrex
LinkPRO Digital Battery Monitor
The LinkPRO selectively displays voltage,
charge and discharge current, consumed amp
hours, remaining battery capacity and the time
remaining of your battery bank. Using a clear
backlit LCD Display and an intuitive user
interface, all parameters can be recalled with just a button press.
A second battery input is also provided to monitor voltage on a
second battery. It is equipped with an internal programmable alarm
relay, to run a generator when needed or to turn off devices when
the battery voltage exceeds programmable boundaries.
• Provides critical information about the status of your battery
bank
• Displays voltage, current, consumed amp hours and remaining
battery capacity
• Secondary battery bank voltage monitoring
• Auto sensing battery voltage inputs
• Large backlit LCD Display
• Programmable alarm relay
• Shunt selection capability enables flexible system integration
• Splash proof front panel
• 500 Amp shunt included
• Displays time remaining
• Communication/expansion port
• Stores a wide range of history events in internal memory
• Battery temperature sensor input
XAN 84-2031-00
Blue Sea Systems Ultrasonic Tank Sender
• Accurate - used with the Vessel Systems
Monitor VSM 422 PN 1800 above—can be
precisely calibrated for each tank
• Reliable - SSI Technologies, Inc. Fluid-Trac
is non-contacting eliminating any mechanical
moving parts that can wear and cause
intermittent or complete signal loss
• Digital filtering - Eliminates errors due to liquids sloshing in
mobile tanks
BSS 1811
BSS 1810
Gasoline only, max tank depth 24"
Diesel, water or waste, max tank depth 32"
Fuel Cells / Battery Chargers
Max Power Marine Fuel Cell
The Marine Fuel Cell can supply
power for all 12 V on board equipment
providing power while in an idyllic
anchorage or on a long passage in total
silence for the ever increasing list of 12V
equipment; electronics, refrigerators,
microwaves, inverters and even water
makers all of which are being fitted to
sailing yachts. Max Power's new Marine Fuel Cell range offers
extended lifespan, reduced methanol consumption and increased
user control, providing clean and virtually silent 12V DC power
to constantly charge your batteries. Capable of running 24hr/day,
the fuel cell continually supplies power as needed. This "constant
power" approach reduces the charge/discharge cycles imposed
on house batteries, thereby significantly increasing their service
life. Fuel cells are ecologically friendly and with the capacity to
replace fossil fuel, they are now a reality with the potential to
power the next generation of yachts.
• Ah per day:
100
• Continuous output 12V:
4.2A
• Recommended for yachts:
32-40'
• Dimensions:
L: 435 x W: 200 x H: 276 mm
• Weight: 7.5 kg
Fuel Cartridge:
• Capacity: • Weight: • Hour/Cartridge: 5 Litre
4.2 kg
82
MXP MFC110
Parts:
MXP MFCM5
MXP MFCMO*
Methanol cartridges 5 litre each, 2/set
Medium process
*Request item
Professional Mariner
Bat Savr & Bat Savr M
Designed for charging up to 25 amp
hours per day as well as long term
battery storage. Plugs into a standard
120 VAC outlet and connects to your
battery with alligator clips. LED light
signifies proper operation and does not drain battery if AC is off.
Cannot over charge.
• Fully automatic
• Does not drain battery if A.C. is off
• Reverse polarity protected
• Precise voltage regulation
• Current limiting
• Over temp. protection
PRO 10115
PRO 10116
6' D.C. output wires with alligator clips.
Wall or bulkhead mount, AC cord, and 5 foot D.C. output wires.
213
Guest
Portable Battery Chargers
Automatic 3-stage portable charger
designed for fast, full charging and
maintenance. Completely sealed
unit is waterproof, corrosion proof
and shock proof. Built in electronic
overload & thermal protection, LED
indicators, reverse polarity protection
and carrying handle. Comes pre-wired with a 6' AC cord
and a 4' DC output wire with alligator clips.
GUE 2612A
GUE 2606A
10 amp portable charger
6 amp portable charger
Xantrex
TrueCharge 2 Battery Chargers
Easy-to-read display can be augmented
with an optional remote panel.
• Microprocessor-controlled,
multistage charging algorithms
• Settings for two and three-stage
charging
• Settings for flooded, gel, AGM or lead-calcium batteries
• Temperature-compensated charging (with optional sensor)
• Power factor corrected for efficient charging
• Battery-equalization feature
• Ability to charge dead batteries
• Reverse battery polarity protection
• Over and under-temperature protection
• DC over-voltage protection
• Battery overcharging protection
• Ignition protection
• 3 DC outputs
Part #
Output
Dimensions
Weight
XAN 804-1220
20A-12V
H: 2.8" x W: 6.7" x L: 9.8"
4.8lbs
XAN 804-1240
40A-12V
H: 2.8" x W: 6.7" x L: 9.8"
4.8lbs
XAN 804-1260
60A-12V
H: 3.5" x W: 6.7" x L: 13.4"
9.9lbs
Accessories:
XAN 808-0232-01 Battery temperature sensor
XAN 808-8040-00 Remote Panel
Xantrex TrueCharge 2 Remote Panel
Unit reads like a fuel gauge and displays
critical information on charging of battery
banks.
• Gives the user flexibility to set
maximum charger output current
• Allows the charger to be powered on or
placed into standby while AC power is connected
• Programs the charger for battery type and temperature
• Displays faults and warnings, basic battery level and settings
• Displays the current status of each battery or each battery
bank
• Simple push buttons to change charger settings
• FCC Class B compliant
• 7.6 m (25’) 6-conductor crossed telephone cable
• 4-9/16" x 11/16" x 3-9/16”
XAN 808-8040-00
214
Battery Chargers
Guest Charge Pro Series Chargers
3-Stage Charging:........... Bulk Stage
Absorption Stage
Float Maintenance Stage
• Ignition, reverse polarity & short circuit protected
• Maintenance mode protects batteries during storage
• Fully potted to waterproof electronics
• Vibration and shock protected
• Self-protecting under extreme ambient conditions
• For flooded, gel and AGM batteries
• 2 - year limited warranty
Single
Battery
Dual
Battery
Triple
Battery
Part #
Total
Amps
Outputs
Amps
per Out
Battery Systems
AC
DC
Dimensions
GUE 2608A
6
1
6
12V
6' cord w/ connect
charge plug
4' with ring
terminals
3.5" x 6.4" x 2.25"
GUE 2610A
10
2
5/5
12V
Studs
Studs
5.5" x 7.75" x 2.42"
GUE 2611A
10
2
5/5
12V+12V or 24V
6' cord w/ connect
charge plug
4' with ring
terminals
5.5" x 7.75" x 2.42"
GUE 2620A
20
2
10/10
12V+12V or 24V
6' cord w/ connect
charge plug
6' with ring
terminals
7.0" x 9.6" x 2.63"
GUE 2623A
25
3
10/5/10
12V+12V+12V
or 24V+12V
6' cord w/ connect
charge plug
6' with ring
terminals
7.0" x 13.0" x 2.6"
Guest Charge Pro PLUS Series Chargers
The Charge Pro PLUS system combines a Guest charger with an alternator power
module (VSR) to continuously charge the trolling motor or house battery while the
engine is running. This system allows energy which is normally wasted on a fully
charged cranking (or starting) battery bank to be re-directed to the trolling motor or
house battery bank ensuring that all batteries are fully charged.
Part #
Total
Amps
Outputs
Amps
per Out
Battery
Systems
AC
DC
Weight
Dimensions
GUE 36082-12
8
2
4
12V
6' cord w/ connect charge plug
Studs
6 lbs
6.3" x 6.8" x 3"
GUE 36202-12
20
2
10/10
12V
6' cord w/ connect charge plug
Studs
9.5 lbs
8.0" x 8.9" x 3"
Battery Chargers
Magnum MC MagnaCharger
This battery charger is compatible with
power from the world over, is easy to
install, and simple to setup. Connections
to the charger are clearly marked and
easy to make because of the large wiring
compartments. Large DC terminals make
accommodating the right size cable
possible. Low loss isolation makes charging the batteries more
efficient. Built for mobile applications and compliant to UL1236
including the marine supplement and CSA 107.2 safety standards.
• Charger efficiency: >85%
• Five stage charging: Bulk, Absorption, Float, Full Charge, and
Equalize Battery
• Automatic temperature compensation
• Internal cooling: Passive
• Over temperature protected
• DC over load protected: current limited
• Conformal coating on PCB's, anodized aluminum heatsink and
stainless steel fasteners
• Warranty 2 years
Output
VDC
Outputs
LxWxH
Weight
lbs
MAG MC 20
20
3
14.8” x 6.5” x 4”
7
MAG MC 40
40
3
14.8” x 6.5” x 4”
8
Part #
Professional Mariner ProTech i-Series
Auto Battery Chargers
• Fully automatic multi-stage
charging: 4 complete stages, for
fast charge times, conditioning,
maintenance of each battery &
dockside power supply mode
• Active battery balance control
(BBC): actively monitors the
condition of each battery or bank while charging, to ensure no
battery is overcharged.
• User programmable battery type selector: for use with lead
acid, AGM and gel batteries
• User programmable conditioning mode: 1 to 4 hours
• Fully automatic wide range global AC input: select 95VAC - 250VAC 50/60Hz
• Built in safety: ignition protection, over temperature, over
voltage and reverse polarity protection
Part #
Volts
Amps
Banks
Size L x W x H
Weight
4 lbs
PRO 63310
12
10
2
10.5" x 6.375" x 2.875"
PRO 63315
12
15
3
10.5" x 6.375" x 2.875"
4 lbs
PRO 63320
12
20
3
10.5" x 6.375" x 2.875"
4 lbs
PRO 63325
12
25
3
10.5" x 6.375" x 2.875"
4 lbs
PRO 63331
12
30
3
15.5" x 6.375" x 2.875"
6.5 lbs
6.5 lbs
6.5 lbs
PRO 63341
12
40
3
15.5" x 6.375" x 2.875"
PRO 63420
24
20
3
15.5" x 6.375" x 2.875"
215
Professional Mariner
ProNautic Series Auto Battery
Chargers
• Intelligent C3 software controlled multi
stage charging: optimal fast charge,
conditioning, maintenance & dockside
power supply mode
• Active battery balance control (BBC): C3
software actively monitors the condition of each battery or
bank while charging, to ensure no battery is ever overcharged
• Intelligent self calculating absorption-conditioning mode:
Automatically programs charge/conditioning time based on
discharge state of batteries, resulting in a 100% charge while
desulfating batteries and extending battery life
• Automatic 10 day re-condition mode: added conditioning to
maximize battery life
• Fully automatic wide range global AC input: 95VAC to
250VAC 50/60hz
• True temperature compensation with remote probe
• Interactive remote port for optional helm control & display
• User programmable charge profiles for up to 7 battery types
• Built in safety: ignition protection, over temperature, over
voltage and polarity protection
• 17" x 8.25" x 3.75"
Part #
Volts
Amps
Banks
Weight
PRO 63725
24
25
3
11 lbs
Professional Mariner
ProSport Series Battery
Chargers
• Distributed-on-demand
technology: automatically
charge and maintain engine
crank battery (s) while sensing
and distributing 100% of the available charging amps to
trolling motor or house bank battery (s).
• Automatic multi-stage charging: fully charge and extend the
life of your batteries
• Automatically charges and conditions your batteries with a
built-in safe maintenance mode
• Digital battery type selector: user selectable performance
charge profiles for: flooded (lead-acid)/STD AGM, GEL & high
performance (hp) AGM
• LED status centre provides at-a-glance status of: AC power,
charge mode, battery type, and ready/maintenance mode.
• Extruded aluminum housing
• Dynamic thermal output control: controls charging amps while
maintaining the recommended charger temperature.
• 100% Waterproof and shockproof, dual inline DC safety fuses
for trolling motor accessory battery banks, dynamic thermal
output control, over voltage, overload, over temperature,
reverse polarity, and ignition protection.
• Pre-wired (5') for easy installation
Part #
Volts
Amps
Banks
LxWxH
Weight
PRO 42006
12
6
1
5.75" x 7.25" x 2.5"
6 lbs
PRO 42008
12/24
8
2
7" x 7.25" x 2.5"
8 lbs
PRO 42012
12/24
12
2
8.5" x 7.25" x 2.5"
9 lbs
PRO 42021
12/24/36
20
3
10.75" x 7.25" x 2.5"
11 lbs
216
Battery Chargers
Mastervolt ChargeMasters
• High Frequency Switch Mode Technology = compact, lightweight and extremely efficient
• Universal input (90-135, 180-265VAC, 50/60Hz)
• Power Factor Corrected meeting CE certification - >0.98
• 3-stage+ battery charging of up to 3 battery banks
• For use with lead acid, gel or AGM batteries
• Includes auxiliary power supply to provide DC voltage even if batteries are not connected
• Ability to charge a “dead battery”
• High quality output power to keep the batteries healthy, even with low-quality input power
• No reduction of charging power if input power is low
• Meets FCC Class B, over-temperature, ignition protected, meets UL, ABYC and CE
requirements, meets IP23
• Charging capabilities optimized even in high ambient operating temperatures
• Memory function prevents overcharging with peaks in the power supply
• Includes CANbus port for easy connection to Mastervolt’s MasterBus CANbus network
• 2 year warranty
• Includes battery temperature sensor
• Remote panel available, see MasterView Easy, MSV 77-01-0305 (pg 227)
Mass Chargers
Total Charge
Current
Output
Voltage
Battery
Capacity
Dimensions
H x W x D (mm)
Weight
kgs
MSV 44-01-0500
50A @ 14.4V
12V
100-500 Ah
301 x 210 x 131
4
MSV 44-01-0700
70A @ 14.4V
12V
140-700 Ah
360 x 277 x 150
6.7
MSV 44-01-1000
100A @ 14.4V
12V
200-1000 Ah
360 x 277 x 150
6.7
MSV 44-02-0400*
40A @ 28.8V
24V
80-400 Ah
360 x 277 x 150
6.7
MSV 44-02-0600
60A @ 28.8V
24V
120-600 Ah
360 x 277 x 150
6.7
MSV 44-02-0800
80A @ 28.8V
24V
160-800 Ah
430 x 277 x 150
8.8
MSV 44-02-1000*
100A @ 28.8V
24V
200-1000 Ah
430 x 277 x 150
8.8
*Request Item
Mastervolt PowerCharger
• 12V, 20 amp and 40 amp units
• Universal input (90-265VAC, 50/60Hz) , one charger for domestic and international applications
• Fully automatic multi-stage battery charging of up to 3 battery banks
• Settings for lead acid, gel, AGM, flooded or spiral batteries
• Built in memory prevents over-charging
• Auxiliary power supply supplies a constant DC voltage even if the batteries are not connected
• Ability to charge a “dead battery”
• Compatible with low-quality power sources, will not decrease charging power
• Safety Features: Over temp, shutdown, ignition protected, overload protection,
surge and short circuit protection
• Meets UL, ABYC and CE requirements
• Does not include CANbus capabilities; please use the ChargeMaster battery charger series for these applications
• 2 year warranty
Total Charge
Current
Output
Voltage
Battery
Capacity
Dimensions
HxWxD
Weight
lbs
MSV 44-21-0200
20A @ 14.4V
12V
40-200 Ah
8.3" x 5.1" x 2.4"
2.5
MSV 44-21-0400
4A @ 14.4V
12V
70-350 Ah
11.5" x 8.3" x 5.2"
8.8
Power Chargers
The ChargeMaster fully automatic
battery chargers are designed for
medium and large sized recreational
and semi-professional systems. The
ChargeMaster can charge batteries
everywhere in the world with the auto
ranging input voltage.
217
Battery Chargers / Inverters
Newmar Battery Chargers
Phase Three “Smart” battery charging technology interacts with batteries to put them through
the optimum three stage charge process which provides for fastest recovery and ideal
conditioning, maximizing battery performance and extending battery life. All models are housed
in a stainless steel case and the internal circuitry is polyurethane coated for maximum corrosion
resistance.
Ref
• “Smart” circuitry provides three stage charging - bulk, absorption, float
• Gel-cell/flooded lead-acid/AGM battery type switch selects charge/float voltages
A-1
• Charger status displayed with LED and/or audible indicators
A-2
• Multiple isolated output banks; ammeter indicates total output current
• Optional sensor adjusts output voltage based on battery temperature (except PT-7) A-3
• Current limiting-prevents damage from overloading
A-4
• Use as a power supply; can power loads without a battery in line
A-5
• Full two year parts and labour warranty
A-6
Height x Width x Depth (mm)
10.5”(26.7) x 5.0”(12.7) x 2.8”(7.1)
12.5”(31.8) x 7.7”(19.6) x 4.3”(10.9)
14.1”(39.4) x 9.5”(24.1) x 4.0”(12.7)
15.5”(39.4 x 9.7”(24.6) x 5.0”(12.7)
16.7”(42.4) x 9.8”(24.9) x 6.7”(17.0)
19.5”(49.5) x 12.2”(40.0) x 8.2”(20.8)
Max. Output
Amps @115V
Output
Banks
Battery
Capacity
(amp hours)
Case
Size
Weight
lbs
3.2
Volts
Input VAC
Input Amps
@115V
NEW PT-7
12
88-132 or 76-264
2
7
2
14-70
A-1
NEW PT-14
12
85-264
2.8
14
3
28-140
A-2
8
NEW PT-24-20W
24
85-135 / 150-270
8.5
20
3
40-200
A-3
12
NEW PT-25 W
12
90-132 / 80-254
6.5
25
3
50-250
A-2
8.2
NEW PT-40
12
85-132 / 70-270
8.5
40
3
80-400
A-3
12
NEW PT-80
12
90-264
12
80
3
160-800
A-5
15.2
NEW PT-24-8
24
85-364
2.8
8
3
16-80
A-2
8
NEW PT-24-13
24
90-132 / 180-264
6.5
13
3
26-130
A-2
8.2
NEW PT-24-45U
24
90-264
12
45
3
90-450
A-5
12.2
NEW PT-24-95W
24
207-253
N/A
N/A
3
180-950
A-6
34
Part #
Newmar Temperature Sensor
Newmar Remote Indicator Panel
- 5 mV per cell per °C. Sensor supplied with
25' cable and plug-in connector.
LED’s indicate charger output stage. Button
allows manual re-initialization of three stage
charge cycle. Supplied with 25' cable and plugin connector. (Not for all models)
NEW TCS-12/24-25'
Sensor
NEW RP
3" H x 4.75" W
Mastervolt Mass Sine Wave Inverters
• Utilizes High Frequency Switch Mode Technology Small, lightweight and amazingly quiet
• True sine wave – clean output power for sensitive devices such as electronics
• High surge power output when starting
• Compatible with any electrical system, easily incorporated into existing electrical systems
• AC power always available even without shore power or generator power
• Energy-efficient circuit
• All loads’ power factors are allowed
• Electronic components are perfectly shielded
• Easy installation, operation and clear signaling
• Broad Range – 800W to 15kVA, 120VAC/60Hz, 230VAC/50Hz
• Optional on/off LED panel (see below) for control and remote operation
Battery
Low Battery
Switch OFF/ON
High Battery
Switch OFF/ON
Max. Peak
Load
Input
Current
MSV 02-50-12000
12V
10V / 11V
15V / 14.5V
4000 VA
200A
MSV 02-50-22500
24V
19V / 22V
33V / 31V
5000 VA
120A
Part #
Mastervolt Remote Panels
Model C4-RI, has an inverter on/off switch, an ‘on’ indicator and a 'fault’ indicator. Possible
faults include battery voltage too low, overload, or a short circuit in the AC circuitry.
MSV 07-04-04110
Weight
HxWxD
20 lbs
16.6" x 12.5" x 5.9"
Smart choice for power™
POWER SOLUTIONS FOR ALL MARINE APPLICATIONS
FREEDOM SW Sine Wave Inverter/Chargers
• Premium performance & hard-to-match pricing in one package
• Power factor corrected, multi-stage charging uses less AC
input power than traditional chargers
• High surge capability for demanding electrical applications
• Available in two 12 V models: Entry level 2000 watt and
Feature rich 3000 watt
Battery Chargers
• Powerful, high efficiency charger in an ultra-compact footprint
• Worldwide input voltage range: 90Vac - 240 Vac nominal
• Power factor corrected charging effectively uses incoming AC
shorepower minimizing current draw
• Wide operating temperature range
• Available in three 12 V models: 20, 40 and 60 amps
Sine Wave Inverters
• Cost effective line of inverters provides an affordable alternative
to modified sine wave products
• Conformal coated circuit boards for all climate conditions
• Built-in USB port to charge handheld electronic devices
• Available in three 12 V models: 600, 1000 and 2000 watt models
© 2010 Xantrex Technology Inc. All rights reserved. Xantrex, Smart choice for power, TrueCharge and PROwatt
are trademarks of Schneider Electric Services International sprl, registered in the U.S. and other countries.
www.xantrex.com
219
Inverters
Xantrex XS400 Sine Wave Inverter
Xantrex Prosine 1000/1800 Series Inverters
400 watts of sine wave AC power for
your electronics. Its clean utilitygrade output will not produce noise
and distortion on TV's, VCR's,
DVD's and stereos. With a surge
rating of 800 watts, it can power
complete entertainment systems
including two 27” televisions. Includes a built-in transfer switch
that automatically transfers between inverter power and incoming
AC power.
• DSP control technology starts complex loads with ease
• Dual AC outlets and hard wire AC connections
• CSA/NTRL certified to UL458 and CSA 107.1
• Remote panel
• Battery over-voltage and under-voltage protection
• Over temperature shutdown
• Automatic overload, short circuit and ground fault protection
(GFCI)
• Dimensions: 3.3" x 7.4" x 13.5"
• Weight: 10 lbs
• One year warranty
Offering true sine wave output, the
Prosine 1000 and 1800 stand-alone
inverters are ideally suited for
electrical systems that already have
a multi-stage battery charger. Their
120-volt, 60 Hz AC power output
is capable of handling both heavy
duty and smaller, multiple AC loads.
• True sine wave AC output (crystal controlled)
• Removable LCD display can be mounted remotely
• DC terminals offer 180-degree connections for installation in
tight places
• Powersave mode draws only 1.5 watts under no load
• Over temperature shutdown and automatic overload protection
• Over voltage and under voltage protection
• Short circuit and AC back-feed protection
• Weight: 14.5 lbs
• Dimensions: H 4.5" x W 11" x D 15.4"
• Two year warranty
XAN 806-0400
With remote panel
Xantrax Prowatt Sine Wave Inverters
True sine wave output with high surge capability, the PROwatt
SW Series provides the necessary current to startup demanding
electrical loads. In addition to dual GFCI AC receptacles, the
PROwatt SW Series includes a USB connection for providing
power to most USB chargeable devices. Provide power for all types
of electrical loads including, variable speed power tools, advanced
electrical appliances and microwaves.
• Built-in digital display for DC volts and output power
• Heavy duty terminals for battery connection
• Available ON/OFF remote switch (with ignition lockout)
• Low voltage shutdown (10.5 Vdc)
• Low voltage alarm (11.0 Vdc)
• Over voltage protection (15.5 Vdc)
• Over load shutdown
• Over temperature shutdown
• GFCI protection
• Two year warranty
XAN 806-1206
XAN 806-1210
XAN 806-1220
600 watt
1000 watt
2000 watt
Accessories:
XAN 808-9001
Remote
XAN 806-1000
XAN 806-1800
XAN 806-1802
1000 Watt, 12V
1800 Watt, 12V
1800 Watt, 12V, AC hard wire terminal strip for permanent installation into an electrical
system with 15 A transfer switch
Accessories:
XAN 808-1800 Interface panel
Replaces the LCD Panel in the inverter so that
it may be moved remotely in a location of your
choice. Features include: LED indicator for
status monitoring, ON/Bypass switch, internal
filter for reduced interference and comes with
30' of telephone cable.
Xantrex Pro Series Inverters
These modified sine wave
inverters feature a detachable,
digital remote control (using
standard telephone wire &
jacks) to display precise
inverter, AC source and battery
status information from one
convenient location. A built
in transfer switch automatically detects when generator or shore
power status changes to ensure power is always available.
• Can be mounted either horizontally or vertically
• Conformal coated boards
• 1000/1800W inverter easily powers TVs, small appliances, and
other electronics
• Built-in 15A circuit breaker on AC pass-through
• Conformal coated electronics provide moisture resistance
• Hard-wired using a terminal strip or by connecting AC through
a GFCI receptacle (included)
• Battery over-voltage and under-voltage protection
• Over temperature shutdown
• Automatic overload, short-circuit and ground fault protection
• Meets FCC Class B regulations
• UL 458 certified
Part #
Surge
Rating
Output
XAN 806-1010
2000W
8.3A
7.5 lbs
4" x 8.3" x 13"
XAN 806-1810
3600W
15A
9.5 lbs
4" x 8.3" x 15.5"
Weight
HxWxD
There is a Magnum Inverter/Charger to meet your needs
ME Series Inverter/Charger
MM Series Inverter/Charger
Works with: Marine & RV Systems
Works with: Marine & RV Systems
Models:
Models:
ME-2012, ME-2512, ME-3112
MM-1212
MMS Series Inverter/Charger
MS Series Inverter/Charger
Works with: Marine & RV Systems
Works with: Marine, RV Systems &
Renewable Energy (Off-grid and back-up)
Models:
MMS-1012
Models:
MS-2000, MS-2012, MS-2012-20B,
MS-2812, MS-4024
Available Accessories:
Automatic Generator Start Module (AGS), Battery Monitor Kit, Fuse
Blocks, LCD Remote Displays, Smart Battery Combiner (ME-SBC)
Call and ask for our full
catalog for complete
product information.
Phone:
425-353-8833
Web:
www.magnumenergy.com
ME-SBC
Remote
AGS
Battery Monitor Kit
The Powerful Difference
Inverter/Chargers
Magnum MM & MMS Series Inverter/Chargers
MM & MMS inverters provide a cost effective solution for those
with smaller power needs in mobile applications. Versatile, easyto-use, and lightweight, the MM & MMS series provides a reliable
base for your energy system. Units use a PFC (Power Factor
Corrected) charger, which is 85% efficient and the same charger
topology used in all Magnum models. ETL listed to the stringent
requirements of UL/cUL 458, CSA C22.2 #107.1-01 and meets
the KKK-A-822E standard. AC power to continue to pass-thru to
power loads even if the inverter is off.
• Dead battery charging allows charging of batteries that are
extremely low
• Automatic, 4-stage battery charger with power factor
correction
• Inverter/charger has a 12 amp AC transfer relay
• The AC input and output are provided with pigtail wires to
allow hard wiring to a main AC distribution panel or inverter
sub-panel
• Neutral-to-ground switching
• Includes 15’ battery temperature sensor
• Dimensions L: 16.6” x W: 8.4” x H: 4.7”
• Weight 20 lb
• Two year warranty
MM Modified Sine Wave
Inverter
• Input battery voltage: 9-15.5 VDC
• Rated input battery current 125 ADC
Part #
MAG MM1212
Magnum ME & MS Series Inverter/Chargers
ME Series Modified Sine Wave
The power corrected charger efficiently
charges your batteries even at low AC
voltage, while the modified sine wave
inverter keeps the cost down. Additionally,
the battery temperature sensor works with
the charger for optimum battery charging.
• ETL Listed to the requirements of UL/cUL 458
• Designed with Flash programming for memory upgrades
• Mount on a shelf, bulkhead, or even upside down
• Aluminum base and cover
• Multiple ports, including an RS485 communication port for
network expansion, and a remote port
• Comes with an on/off inverter-mounted switch with an easy-toread LED indicator
• Expanded transfer relay: 50 amp transfer service
• Extra large AC access cover with terminal screw block and
360° DC connection terminals with covers
• All boards can be replaced in the field
• Five stage charging including bulk, absorb, float, equalize, and
battery saver
• 13.75" H x 12.65" W x 8" D
• Three year warranty
Charger
Output
Inverter
Output
Weight
MAG ME-2012
100 amp
2000W-12V
38 lbs
MAG ME-2512
120 amp
2500W-12V
45 lbs
MAG ME-3112
160 amp
3100W-12V
48 lbs
Part #
Charger
• Continuous output at 25° C 70 ADC
Chargrer Output
Inverter Output
70 amp
1200W-12V
221
MS Series Pure Sine Wave
All of the same features as the ME series
above but with a Pure Sine Wave Inverter.
Power your T.V.s, stereos, plasma
screens, and other sensitive electronics
without worry. The pure sine wave
inverter and power factor corrected
charger provide clean, reliable inverter power with low total
harmonic distortion (THD) of less than 5%.
MMS Pure Sine Wave
Inverter
• Input battery voltage: 9-17 VDC
• Rated input battery current 102 ADC
Charger
• Continuous output at 25° C 50 ADC
Part #
MAG MMS 1012
Chargrer Output
Inverter Output
50 amp
1000W-12V
Part #
MAG MS-2012
Charger Output
Inverter Output
Weight
100 amp
2000W-12V
43 lbs
MAG MS-2812
125 amp
2800W-12V
53 lbs
MAG MS-4024
105 amp
4000W-24V
58 lbs
222
Inverter/Chargers
Magnum MS-AE Series Pure Sine Wave
Inverter/Chargers
The MS-AE Series Inverter/Charger
from Magnum Energy is a pure sinewave
inverter designed specifically for the most
demanding renewable energy applications.
The unique design of the MS-AE Series
can provide 120 and 240 volts AC output
in one unit, eliminating the need to stack
two units together to get 240 volts. ETL listed to the stringent
requirements of UL 1741 and CSA C22.2 No. 107.1-01 for
renewable energy installations.
3 year warranty
• Two legs at 30A per leg transfer service
• Comes with an on/off inverter mounted switch with an easy-to
read LED indicator
• 13.75" H x 12.65" W x 8" D
• Weight: 54.5 lbs
Charger Output
Inverter Output
MAG MS 4448AE
Part #
105 amp
4000W-12V
MAG MS 4024AE
60 amp
4400W-24V
Magnum Remote Control
Simple to use, yet allows full set-up features
of the ME, MM, MS and RD Series inverters.
The ME-RC also has the option of controlling
the ME-AGS Automatic Gen Start using a
network connection to the inverter.
• Non-volatile memory saves your settings even if the power is
disconnected
• The large LCD screen and at-a-glance LEDs display the
inverter/charger status
• Soft keys give access to menus and a rotary encoder knob
quickly scrolls through menus and selects settings
• Multiple functions in one place, including: inverter on/off,
charger on/off, shore power breaker settings, AGS control,
meter button, setup, and technical menus
MAG ME-RC-50
Panel w/ 50' cable
Magnum Battery Monitor
A fuel gauge for your batteries. It gives
you a percentage of charge of your battery
bank. The monitor reports percent of charge,
real time amps, amp hours, minimum and
maximum DC volts. The kit includes a
Battery Monitor, cables, and a 500 amp
shunt.
MAG ME BMK
Kit
Magnum Battery Teperature Sensor
MAG ME-BTS-15 Kit
Magnum Remote Control
Optional remote control provides six LED
indicators for inverter and charger status,
includes a remote ON/OFF switch; comes
with 25’ cable. This remote is for MM Series
inverters with the battery charger feature; such as the MM612AE,
MM1212 or MM1212AE models.
MAG MM-RC25
Magnum ME 300F & ME 400F Fuse Kits
The Magnum Energy fuse block is
designed to provide code compliant overcurrent protection. It uses a fast acting,
current limiting class-T fuse cartridge
which provides instantaneous protection
in the event of a short circuit but also
employs a time delay to allow momentary current surges common
in inverter applications. Rugged injection molded polycarbonate
base and thermoformed ABS cover.
MAG ME 300F
MAG ME 400F
300 amp
400 amp
Magnum Automatic Generator Start Module
The Magnum AGS is compatible with
most major generators and is designed to
automatically start your generator based
on low battery condition or the inside
temperature of the boat.
Adjust the AGS to meet your needs: With the
AGS, you can set the battery start voltage from 10-12 VDC or 2022 VDC, the start temperature from 65° - 85°F, the run time from .5
to 6 hours, and the quiet time.
Manual start and stop: Auto gen start settings do not interfere
with the manual start / stop operation of the generator. Just use any
existing start / stop switch in your coach.
• Selectable quiet time 5 choices: 9 pm - 7 am, 9 pm - 8 am, 9 pm
- 9 am, 10 pm - 8 am, 11 pm - 8 am
The network version AGS allows operation of the AGS via the
ME Series remote panel with Magnum ME & MS series charger/
inverters.
MAG ME AGS-N
Inverter/Chargers
223
Xantrex Freedom Inverter/Chargers
The Freedom SW 2000 inverter/charger features pure sine wave output and power factor corrected multi-stage charging to meet
power needs of today’s sensitive and sophisticated electronics. The Freedom SW 2000 offers premium performance and hardto-match pricing in one package. It provides 2000 watts of continuous sine wave power to operate commonly used AC-powered
electronics such as plasma television sets, microwaves, entertainment systems, computers, printers, power tools, mini refrigerator and
much more
Features:
• Pure sine wave output to operate sensitive electronics
• Built-in transfer switch automatically transfers between inverter power and incoming AC power
• Power factor corrected multi-stage charger for fast, efficient charging
• Temperature compensated charging for all climate conditions
• Wide operating temperature range: 32°F to 122°F (0°C to 50°C)
• Ignition lockout prevents unnecessary battery drain when the alternator is not providing power
• Adjustable low-voltage disconnect
• Conformal coated circuit boards for humid environments
• On/off remote control panel with 25’ cable included (Part# 808-9002)
• Easy to install and easy to use
• Optional GFCI (part# 808-9003)
• Meets CSA, UL458 (with marine supplement), ABYC and FCC Part 15, Class B requirements
Protection:
• Battery over-voltage and under voltage protection
• Over-temperature shutdown
• Automatic overload protection
• Short-circuit protection
• Ground-fault protection on units with GFCI option
Part #
Output
Output Current
Surge Power
Dimensions
Weight lbs
XAN 815-2000
2000A
100 Amp
4000 amps
H: 7.75" x W: 13.5" x L: 15.25"
66
XAN 815-3000
3000A
150 Amp
6000 amps
H: 11.8" x W: 17.1" x L: 20.5"
77
N ot e s
224
Inverter/Chargers
Xantrex Prosine 2.0 Series
Inverter/Charger
Xantrex Freedom HF
Inverter/Chargers
Available in two sizes: 1000 watts with a 20-amp charger and
1800 watts with a 40 amp charger. Temperature-controlled
multistage charging ensures that your batteries are recharged
safely and efficiently. Both include an automatic transfer switch
and a detachable digital remote control panel display that provides
precise system information and can be mounted wherever you
require the information.
• Power microwave ovens, TVs, DVD players, small appliances
and other electronic equipment
• Automatic three-stage battery charger
• Hardwired using a terminal strip, or by connecting AC through
GFCI receptacles (included)
• Built-in 30 amp relay to automatically transfer between inverter
power and incoming
• Battery over-voltage and under-voltage protection
• Over temperature shutdown
• Automatic overload, short-circuit and ground-fault protection
• ETL listed for use in marine applications
Dimensions: 806-1020 H: 4.2 x W: 9.5 x L:15.5“
806-1840 H: 4.2 x W: 9.5 x L: 18.0“
Output
Charge
Rate
Surge
Power
Weight
lbs
XAN 806-1020
1000A
20 Amp
2000 amps
10
XAN 806-1840
1800A
40 Amp
3600 amps
12.8
Part #
Prosine 2.0 inverter/chargers
deliver up to 2000 watts of true sine
wave output power and combines
this with a 100 amp, Multi-stage
battery charger. Series stack ability
allows for two units to power 240
VAC applications such as power tools, oven ranges, washer/dryer
combinations and air conditioners. Includes a full function LCD
remote control panel and battery temperature sensor.
100 Amp, 3-stage charger for flooded, AGM and gel batteries.
LCD Display panel
Independent inverter and charger on/off controls
• Push button control of power sharing, equalizing,
battery set-up, and system configuration
• Easy to read backlit digital text messaging display
• Numerically displays AC and DC system information
including volts, amps and state of inverter/charger
Monitors battery temperature and adjusts charger to
provide an accurate charge in any climate
Battery Temperature Sensor
The included battery temperature sensor lets the unit adjust
the charge formula in real time according to the actual battery
temperature to ensure that batteries are fully, but not overcharged,
even when the temperature fluctuates. 25' cable.
Electrical Specifications - Inverter
Output current ............................. 17 A RMS continuous, 50 A peak
Output voltage ............................. 117 VAC RMS
Electrical Specifications - Charger
Output current ............................. 100 A DC continuous
Output voltage ............................. 12 VDC nominal
Output voltage range . ................. 0 - 17.5 V
Charge control . ........................... 3 stage with manual equalize
Charge temperature comp............ Remote battery sensor
Input AC voltage .......................... 120 VAC nominal
Input AC voltage range ................ 90 - 135 VAC
• Built-in 30 A transfer switch automatically transfers between
inverter power and incoming AC power
• Power sharing reduces charging current when AC loads are
activated to prevent tripping of shorepower breaker
• Equalization mode conditions batteries for longer life
• Ground fault circuit interrupt protection
• Two year warranty
• 17.7 H x 11.2 W x 5.7" D
XAN 805-2020
����������������
������������������
�����������������������������������������
�������������������������������������������������������������������������������������������
����������������������������������������������������������������������������������������
��������������������������������������������������������������������������������������
������� ���������� ������� ���������� ������ ���� ������ ������������� �� ������� ������ ����
����������� ������� ��������� ���� ������� ����� ����������� ����������� ����� ��� ���������
���������������������������������������������������������������������������������������
���������������������������������������������������
���������������������������
226
Inverter/Chargers
Mastervolt Mass Combination Inverter/Chargers
Battery charging, supplying 120V power, switching and the use of extended AC loads to be utilized on board, even
when limited shore power is available. Power can be drawn from a shore connection, generator or charged batteries.
Mastervolt’s three-step plus charging method guarantees more battery power and a longer life span. These units are
1/2 the weight and 1/2 the amp draw of traditional inverter/chargers..
• True Sinewave for clean, efficient power
• High surge power output when starting
• Switch mode technology - extremely light weight & compact
• Generator / shore support - Parallel to generator or shore to increase start-up power
with limited generator power
• Output power rated at max./peak voltage
• 3 stage + battery charging of up to 3 battery banks of lead acid, gel or AGM batteries
• Charger has the ability to revive a dead battery, includes an auxiliary power supply
• Built-in GND relay
• Ground stud
Standard panel comes with the Mass Combis (panel frame
• Automatic transfer switch
exclusive). It indicates DC consumption, charge phase, failure
• Variable speed fans for cooling
and AC availability and contains a ’charger only’ on/off switch.
• Meet UL, ABYC and CE requirements
Connection cable (6m) included
• Includes battery temperature sensor and ICC Remote Panel
MSV 37-01-2005
DC input voltage (nominal)
12V
DC input voltage range
10­-15V
MSV 37-02-2005
MSV 37-01-4005
24V
12V
20-­31V
10-15V
MSV 37-02-4005
24V
20-31V
Continuous power @ 25°C / 77°F
2000 VA / 16.7A
Parallel use (to double the power)
yes
no
Parallel with shore/generator
yes
yes
Dimensions (H x W x D)
18.1" x 12.5" x 5.6"
18.7" x 12.5" x 10"
Weight
24.3 lbs
46.3 lbs
3750VA / 16.5A
Max. charge rate (adjustable)
100A @ 14.25V DC
60A @ 28.5V DC
200A @ 14.25V
100A @ 28.5V
Primary AC consumption
1635 VA / 14.5A
1955 VA - 17A
3270 VA - 29A
5270 VA - 29A
Charge voltage @ 25°C / 77°F
14.25 / 13.25V
28.5 / 26.5V
14.25 / 13.25V
28.5 / 26.5V
Second charge output, 3­stage
5A
2 x 5A
Temperature sensor battery
6 metre cable and telejack plug standard
20' Cable & Telejack
Newmar Inverter/Chargers
These inverters output pure sinusoidal AC for efficient operation of all appliances, plus loads with sensitive
electronics and microprocessors such as computers and medical equipment. For applications where reliability
and performance are paramount, and low noise operation has become a critical factor. All connectors and
mounts are heavy duty commercial grade.
• Built-in high output charger for rapid battery bank replenishment - 1800-3000 watt models feature three
stage charger with output programmable for, gel-cell, flooded lead-acid or AGM battery type and amphour capacity selector for proper charging in various applications
• Internal charger is activated by an automatic transfer relay whenever external AC power is available.
• Large DC input terminal blocks and front panel GFCI protected outlet receptacles (AC may be hard-wired)
• All important aspects of inverter and charger operation clearly displayed with front panel status indicators optional remote panel available (See below)
Ref
Height x Width x Depth (mm)
• Short circuit, overload, over-temp, ground fault and output circuit breaker protection
• Thermally controlled cooling fan prolongs life of components
I-2 7.5”(19.1) x 16.0”(40.6) x 15.5”(39.4)
• Automatic low voltage shutdown circuit prevents damage to batteries
I-3
10”(25.4) x 17”(43.2) x 16”(40.6)
• Powder coated aluminum and con-formal coated internal circuitry
• UL listed with full two year warranty
Remote Panel
Charger Output
Max Amps @V
Charger
Input Max
Amps
Case
Type
Weight
lbs
4000/1800
85A@12V
15
I-2
54
6500/3000
105A@12V
20
I-3
75
6500/2200
40A@24V
15
I-2
57
14,000/4800
115A@24V
40
I-3
95
Part #
Battery
Voltage
Inverter Output
Surge/Continuous
NEW 12-1800IC
12
NEW 12-3000IC
12
NEW 24-2200IC
24
NEW 24-4800IC
24
Remote control and
indicator panel,
duplicates all status
indicators found on unit front
panel and allows remote ON/
OFF capability. Provided with
25' of cable.
NEW ICR-2-25
Remote Panels
Mastervolt
Masterview Easy Touch Remote
Mastervolt
Masterlink MICC Panel
• Allows the monitoring and control of
multiple Mastervolt devices on one panel
• 3.5” Touch screen
• Multi language operation
• Compatible with the Mastervolt MasterBus
network plug-and-play
• Low power consumption
• Integrated buzzer
• No external power supply needed
• Night view backlight
• Alarm indication via backlight color
• Key board lock function
• Flush front mounted and adhesive template
• Standard delivered with mounting bracket
• Fits in Raymarine/ Simrad size 110x110mm
Remote control for a battery charger, inverter
or charger/inverter combination (Combi).
The information provided includes reading voltage, current, Ah,
time remaining and remaining capacity in percentage terms of two
independent batteries. The Masterlink MICC has LED indicators
for remote monitoring of the battery level. A LCD screen also
displays direct online data or historical information. A back box,
easy to install, is included as standard for protecting the electronic
components against moisture and dust.
• With LCD readout and LED bar
• Included shunt for precise measuring
• Includes protective housing
• Dimensions: 120 W x 65 H mm
MSV 70403105
MSV 77-01-0305
Mastervolt
Masterlink BTM-III Panel
Mastervolt Mass Combi Remote
• Illuminated
• Adjustment of AC input limitation (4, 6, 10, 16 and 25 Amps)
• LED bars for read out of actual AC load, actual AC voltage and
selected AC input limitation
• Status LED’s for external AC source and failure
MSV 70-40-5050
Mastervolt C3-Rs Remote Panel
• Aluminium construction
• Contains a CSI (Charger Status
Interface) and a DC high/low alarm
• Will show an occurring charger error on
its LED display by means of a code
• Dimensions: W: 120 x H: 65 x D: 40 mm
227
• For three independent batteries
• State of charge for all three banks
• Automatic calculation of charge efficiency
factor
• More historical data than ever before, including ‘abuse
counter’ (excessive & very slow discharges)
• Includes protective housing
• NMEA 0183 connection
• Read-out possible in ten different languages
• One shunt (500A/50mV) included (precise measuring of
one battery)
MSV 70-40-3163
Parts:
MSV 6502001030
MSV 65-02-100150
MSV 07-04-03040
No te s
6 m remote cable
15 m remote cable
228
Generators
Mastervolt Whisper 3.5 Diesel Generator
The Whisper 3.5 is an extremely compact oil-cooled one-cylinder diesel engine
that can be fitted into the smallest location on board but is sufficiently powerful
to run a small air-conditioning system, to permit limited electric cooking or to
use a low energy water maker etc. At the same time your batteries are being
charged quickly, allowing you to switch back to silent inverter power for the
remainder of the day.
• 3.5 (3.2 kW) 120V 60Hz (3600 rpm) wet exhaust
• Sound shield of thick polyester
• Virtually vibration-free
• Most efficient initial surge tolerance
• Pure sine wave for continuous AC output
• Low-emission diesel technology
• Modern indirect-injection diesel engine
• Plug & Play installation
• Easy control and one-button operation
• Digital Diesel Control system included
• Easily removable composite casing
• Exhaust levels satisfy the most rigorous standards
• Dim: including sound shield L: 19.9" x W: 15.9" x H: 19.7"
• Dry weight 190 lbs
MSV 50-900-555
Installation Kits
• Rotating hose fittings
• Ultra silent
• Easy installation
• Non flammable
• All installation parts included
MSV 50-23-0093 MSV 50-23-0097
Exhaust silencer/waterlock
Water/gas separator
N ot e s
Extensive monitoring and single-touch
operating is easy because of the Digital Diesel
Control (DDC) panel (even automatic start/stop
on low battery capacity voltage and interval).
Isolators
Sure Power Battery Equalizer
Newmar Battery Integrators
• Enables charging of two separate banks
without voltage drop, yet maintains 100%
isolation at all other times
• For systems of three banks or more, an
additional unit may be installed for each
additional bank
• Continuous duty rated to 100 amps
• Easy three-wire hook up for two bank systems
• Terminal for optional wiring of remote light indicating when
battery banks are integrated
NEW BI-100
NEW BI-24-100
• Equalizers make sure 24 and 12V batteries charge and
discharge equally. Will not interfere with other electronic
components
• Fully sealed
• 40 Amp capacity
• Green L.E.D. operational light
• 8-1/2” W x 3-1/4” H x 7-1/4” D
• Weight: 9.16 lbs
SUR 52204
Mastervolt Battery Mates
12 volt
24 volt
While battery isolators are conventional
diode splitters, the Battery Mate’s
technology is electronic and includes
mosfets (transistors). Its components
compensate for variations in voltage
and ensure that charging continues at
the right voltage level, even with several battery banks, with an
alternator maximum of 160Ah at 12V or 24V. The input side on the
Battery Mate is connected to the alternator and/or battery charger,
while two batteries are connected to the output side. The Battery
Mate is easy to install on a DIN rail (industry standard).
• Protects batteries & onboard equipment
• Complete Charging & simultaneous charging
• Robust, durable
• Solid state electronic technology (including Mosfets)
• Easy to install, Ignition proof
• Adjustable set-points
• Input: battery charger or alternator
• 207 H x 140 W x 80 D (mm)
Sure Power Battery Separators
Connects to primary battery, auxiliary battery and
ground. No system modifications are necessary.
Works with any type of 12V negative ground
charging system 100 amps or less. Allows multiple
batteries to be charged from one charging source.
• Charges primary and auxiliary battery after
13.2V
SUR 1314 SUR 1315 229
Uni-Directional
Bi-Directional
Sure Power Battery Isolators
These solid state isolators provide
automatic charge distribution and load
isolation of batteries, eliminating the need
for operator intervention. Designed for
negative ground alternator systems and
batteries of the same nominal voltage.
Will operate at full rated load over the
ambient temperature range of -40oF to +250oF.
MSV 08-31-16025 2 batteries
Mastervolt Masterswitch
Charging
Sources
Charging
Amps
Banks
Dimensions
(L x W x H)
SUR 702-D
1
70
2
4.5 x 3.25 x 3.25
SUR 703-D
1
70
3
4.5 x 3.25 x 3.25
SUR 1202-D
1
120
2
3.25 x 4.5 x 3.25
SUR 1203
1
120
3
6.5 x 4.5 x 3.25
SUR 1302
1
130
2
6.5 x 4.5 x 3.25
SUR 2002
1
200
2
9 x 4.5 x 3.25
SUR 2403
1
240
3
12 x 4.5 x 3.25
SUR 2702
2
70
2
6.5 x 4.5 x 3.25
Mastervolt gives you the option to switch
automatically between available power sources. The
Masterswitch will connect the output to the highest
priority input, if available. Combing power sources
becomes possible for high power consumption
situations, such as when you want to do the laundry
and cook at the same time with a limited shore or generator
power supply.
• Selectable time delay for generator stability
• Two inputs (120V): inverter, shore power or generator
• Single outlet to the 120V power group
• Fully automatic or manual switching
• Power transfer up to 7 kW
• Can be combined with circuit breakers
• Discreet installation enclosure
SUR 2703
2
70
3
6.5 x 4.5 x 3.25
MSV 05-51-06100
SUR 3202
2
120
2
12.5 x 4.25 x 3.25
SUR 3203
2
120
3
12.5 x 4.25 x 3.25
Part #
230
Inverter Accessories / Corrosion Control
Mastervolt Master Shunt
Mastervolt DC-DC Converter
The next generation in battery shunts. MasterShunt integrates the main system fuse
with the shunt adding new technology to take
analog battery information and turn it into
digital information that can be read on the
MasterVolt MasterView digital touch screen remote displays. All
battery conditions, events and capacity can be displayed. The
MasterShunt removes all the complexity of sense wires, small fuses
in signal wires and the main system fuse. The MasterShunt should
be located close to the batteries.
• Easy to install
• Real time clock for auto functions.
• 500 Amps continuous
• Monitored, built-in 500 amp fuse
• Parallel capability up to 4 units (2000A)
• Compatible with Mastervolt’s MasterBus CANbus network
• Auto start/stop for the generator
• 150 x 146 x 65 mm
This microprocessor-controlled converter,
will turn 24V DC into 12V DC. Ensures that
your onboard equipment has a stable power
supply with the right voltage. If you have
many power-consuming devices onboard, the parallel use of
several units can allow capacities of 40, 60 or more Amps.
• Rugged aluminium extrusion body
• Completely shock proof
• Temperature-controlled fan
• Longer life span of halogen lights
• Battery charger function
• Dimmer function for atmospheric lighting
• Programmable via a desktop or laptop PC
• Efficient cooling (microprocessor controlled fan)
• Dimensions: 190 x 130 x 61 mm
• Weight: 1 kg
MSV 77-02-0100
Forespar Lightning Master
Magnum Smart Battery Connector
• An easy to use stand alone battery
combiner and isolator
• Apply a single charging source to the
main battery and the ME-SBC charges
a second battery using a portion of the
charge
• Adjustable voltage ranges, automatic on-off points
• Transfers up to 25 amps
• Bi-directional charging
MAG ME-SBC
Designed to charge auxiliary or starting
batteries from an inverter/charger or other
charging source with limited voltage drop.
• 15 A maximum charge current
• Automatically adjusts for 12 or 24 volt
battery banks
• Automatically switches on/off without
affecting the in-house battery bank or
over-charging
• Utilizes excess current from the primary charging source
• Built-in thermal and over-current circuits
• Reverse polarity protection
• Easy three wire installation
12/24 Volt
Xantrex Alternator Regulator
This unit turns an alternator into an
intelligent source of charging. Multistage regulation provides optimal
charging voltage for common battery
types including flooded, gel, AGM and
Optima batteries. Start delay and soft ramp features reduce belt and
engine wear, and the Amp Manager function adjusts the maximum
alternator output.
XAN 84-2006-01
Lightning Master Static Dissipaters lower
the exposure to a direct lightning strike by
controlling the conditions which trigger direct
strikes (i.e. they reduce the buildup of static
ground charge and retard the formation of the
ion “streamers” which complete the path for
a lightning strike). The Dissipater employs
the point-discharge principal to continually
leak off the lightning causing ground potential in low amperage
dissipation over a long period of time instead of the short duration.
• Length: 21"
FRS 151100
Xantrex Echo-Charge
XAN 82-0123-01
MSV 81200100
Regulator
Newmar Copper Ground Strap
10 mil thick x 2" wide soft copper ground
strap. 100' rolls .
NEW GS-2"X100'
Corrosion Control
Guest Dynaplate
Hull Bonding and Grounding Plate
Guest Galvanic Isolator
Reduces problems of RF interference,
poor SSB or AM transmission / reception
and poor reception of low frequency
navigational bands such as Loran. Takes
the ground away from your engine,
providing a static-free line, eliminating interference and improving
performance. Reduces the occurrence of electrolysis and galvanic
corrosion due to differences between dissimilar metals. The bronze
material serves as the next sacrificial metal on the galvanic scale
after your zincs, providing another buffer against corrosion of
stainless steel parts. Low drag, non-fouling shape scrapes clean
with a wire brush. Each plate includes one gold plated mounting
bolt and silver contact paste.
Part #
Plate Size
Equals Copper Sheathing
GUE 4006
6" x 2" x 1/2"
12 sq ft
GUE 4008
8" x 2-1/2" x 1/2"
20 sq ft
GUE 4012
12" x 3" x 1/2"
40 sq ft
ProMariner Shaft Brush
A 12" phosphor bronze shaft with metal graphite
brush. Bonds propeller shafts to the vessel's
bonding system, eliminating the need for shaft
zincs.
PRO 20035
ProMariner
ProSafe Galvanic Isolation
Interrupts galvanic circuit with other
boats and the dock when your boat is
plugged into a shore power system.
Maintains AC safety ground and solves
the most common cause of galvanic corrosion. Protects against
zinc loss. An economical way of stopping zinc loss and
providing galvanic protection, but with no monitoring.
• Input: 120 VAC, 50/60Hz
• Rated: 41 amp continuous duty
• Use with 30 amp shore power cord
• L: 6-1/4" x W: 6" x H: 1-3/4"
PRO 22033
Newmar Galvanic Isolators
Installing a galvanic isolator between
the AC safety ground and DC bonding
system, blocks a majority of the low
voltage currents, and corrosive action on
the zincs is significantly reduced. This means a significant savings
in boat haul-out fees and zinc replacement costs. For additional
safety, the units feature a large capacitor, providing a secondary low
impedance path for sending AC current to ground.
NEW GI-30 NEW GI-50 30 amp, 2.45 lbs, 2.7" x 4.8" x 7.3"
50 amp, 3.2 lbs, 4.5" x 4.7" x 8.9"
Prevents the galvanic corrosion that occurs on
boats with AC power feeds.
• Voltage Rating: 115/230VAC
• Frequency Rating: 50/60Hz
• Current Rating: 30A at 50°C
• Operating Temp: -20 to 50°C
• Continuous Amps: 30 Amps
• Operation: 115/230VAC/50-60Hz
• Dimensions: 7-3/4' W x 5' L x 2-1/2' H
• Weight: 3.25 lbs
GUE 4531001
ProMariner
Corrosion Test Meter
This analog test meter can help you
find corrosion problems. Best used
in saltwater environment. Easy to
read good-/bad colour scale. Includes
accurate silver chloride half cells on 20
foot test lead and a 10 foot probe lead.
PRO 20006
ProMariner Deluxe Corrosion Monitor
For monitoring corrosion on all types
of vessels. It is installed between the
zinc and the boat's bonding system. It
monitors galvanic and stray currents
that cause corrosion.
PRO 20030
All the same features as the 20030
above but also includes a corrosion
controller which prevents wooden hull
damage and controls zinc consumption.
PRO 20020
ProMariner Corrosion Workbook
Take the guesswork out of corrosion
control. Written for the nontechnical person,
this book answers questions and corrects
misunderstandings about galvanic corrosion
and stray current corrosion.
PRO 20001
231
Download PDF