Section C - Lighting and Fan Control

Section C - Lighting and Fan Control
LIGHTING CONTROLS
SECTION
Commercial Grade Lighting Controls
C
Lighting and Fan
Speed Controls
INDEX
Lighting and Fan Speed Controls Index
Architectural Lighting Control Systems
Dimensions® D3200...........................................C2-C4
Dimensions® D4000..........................................C5, C6
Power Extenders ......................................................C7
a-2000 Modular Dimming Cabinets ...................C8, C9
Architectural Specification
Overview ................................................................C10
Monet® Controls ............................................C11, C12
Monet® Multi-Gang Wallplates ...............................C13
Renoir® Preset Slide Controls.........................C14, C15
Van Gogh® Rotary Dimmers...................................C16
Ganging and Derating Lighting Controls ...................C17
Designer Controls
Overview ................................................................C18
Vizia™ Digital Controls ............................................C19
Vizia™ Remotes .....................................................C20
Vizia-RF™ Scene Capable Dimmers.......................C21
Vizia-RF™ Remotes................................................C22
Mural® Digital Controls...........................................C23
Mural® Scene Controls ..................................C24, C25
Touch Lighting Controls
Overview ................................................................C26
True Touch™ Digital Touch Dimmer .......................C27
ToggleTouch™ Digital Dimmer................................C28
Traditional Controls
Overview ................................................................C29
IllumaTech™ Preset Slide Controls .........................C30
IllumaTech™ Rotary Controls..................................C31
SureSlide™ Slide Controls ......................................C32
Trimatron™ Deluxe Rotary Controls ........................C33
Incandescent Lighting Controls
Toggle Dimmers.....................................................C34
Decora 911 Flasher Switch ....................................C34
4-Level Step Dimmer .............................................C35
Feed-Through Lamp-Cord Dimmers ......................C35
Tabletop Dimmer ...................................................C35
Full-Range Dimmer Socket....................................C35
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
DIMENSIONS® ARCHITECTURAL LIGHTING CONTROL SYSTEM FEATURES
Commercial Grade Lighting Controls
WHETHER IT’S ADVANCED ARCHITECTURAL LIGHTING CONTROL SYSTEMS THAT CAN BE CUSTOM-MANUFACTURED FOR
ANY SITE-SPECIFIC REQUIREMENT OR INNOVATIVE BOX-MOUNTED CONTROLS FOR INCANDESCENT, LOW-VOLTAGE AND
FLUORESCENT LIGHTING, LEVITON HAS THE PRODUCTS YOU CAN DEPEND ON.
Our designer preset systems and distributed programmable computer-controlled systems are ideal for large-scale, multiuse environments. Leviton’s innovative line of box-mounted controls includes digital multi-location devices that provide
maximum performance in architectural, commercial and residential settings.
Dimensions Architectural Lighting Control Systems
Each Dimensions® System combines ease of operation with a wide range of entry stations and
accessories to provide a powerful and flexible control solution. The bright LCD readout displays functions
and scene information in plain English, and guides you step-by-step through setup and operation. They
enable the optimal mix of lighting to be selected—to evoke the right mood—without the guesswork.
Architectural Lighting Control Systems
Triac with generous
1000W zone capacity
LCD with intuitive, menudriven Wizard interface
guides setup and operation
Zone information buttons
display zone name and
brightness level
Interchangeable covers
Features and Benefits
I
Astronomical clock for event scheduling
Programmable scene and zone names,
fade rates and much more
I Join/separate functionality (D3208
and D4200)
I Optional setup software and handheld remote control
I Meets ASHRAE Standard 90.1 requirements
I Backed by a Limited Two-Year Warranty
I
One-touch scene
recall buttons
Individual zone
dim/bright control
NOTE: The Dimensions product line also includes the highly advanced
D8000 system. Consult your Leviton representative for more information.
DIMENSIONS D3200 SYSTEM
Built-in IR receiver for
use with hand-held
remote control
DIMENSIONS D4000 SYSTEM
D3200 Scene Controller
Four-scene Decora® wall
controller with Off switch.
Ideal for secondary
entranceways and
residential applications.
NE505 shown
D3200 Multizone Controller/Dimmer
Advanced, multipoint scene control and dimming with
4 to 6 dimming loads and 8 scene buttons. D3208
features join/separate for partitioning and the addition
of two auxiliary zones via network power extenders.
D3206-ILS shown
D3200 Infrared
Remote Control
Handheld remote
control for use with
any IR-receiving
D3200 controller.
NE210 shown
D3200 LCnet SmartJack
(with Software)
PC/laptop-to-network jack that
enables D3200 Data Manager
software.
NE100-00C shown
D4000 Series Multizone Controller
32-zone digital lighting controller and entry
station used with dimming cabinets, relay cabinets
remote receivers, and accessory stations.
D4200-00W shown
D4000 Series Remote Station
Decora-style wall controllers in
15 versions, each with unique
range of D4000 functionality.
D42P8-00W shown
C
learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
2Courtesy of Steven Engineering,To Inc.
● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
DIMENSIONS® ARCHITECTURAL LIGHTING CONTROL SYSTEMS
Commercial Grade Lighting Controls
Dimensions D3200 Architectural Lighting Control System
The Dimensions D3200 is a component-based lighting system flexible enough for a wide range
of commercial and high-end residential lighting applications. The essential component is the
Multizone Controller/Dimmer, a self-contained programmable dimmer and scene controller that
will control up to eight zones of lighting. The unit will also function as a control unit for other
devices attached to the Leviton Control Network (LCnet). By adding wall mounted scene
controllers, a hand-held remote and a SmartJack for PC-based programming, the D3200
offers a comprehensive lighting control solution that can be expanded at any time.
Dimensions D3200 Multizone Controller/Dimmers
DESCRIPTION
CAT. NO.
D3204 Multizone Controller/ Dimmer—Self-contained dimmer D3204-1LW
with learning IR receiver. Controls up to 4 local zones and a
maximum of 248 remote zones. Features 8 scene buttons
and 32-scene capability. LCD with wizard menus. Supplies
24VDC @ 150mA power to hardwired control devices.
COLOR*
D3208
D3206-1LW
Same as D3204-1LW
W
Dimensions D3208 Multizone Controller/Dimmer—
D3208-1LW
All features of the D3206 plus: Combine/separate functionality
for 8 partitioned spaces in up to 256 configurations. Up to
64 scheduled scene changes. Easy access to 2 auxiliary
loads from front panel. Controls 62 additional remote
zones (248 max).
Same as D3204-1LW
W
D3204 Multizone Controller/Dimmer—same as D3204-IL
except rated for 230V loads.
D3204-2LW
230V AC 50–60Hz:
W
2400W/VA total output,
800W/VA max. per zone. For use with
Incandescent, Tungsten, Magnetic
Low Voltage Transformer,
Advance Mark 10™ Powerline
Electronic Fluorescent Dimming
Ballast, Neon, Cold Cathode
and non-dimming loads.
D3206 Multizone Controller/Dimmer—same as D3206-1L
except rated for 230V loads.
D3206-2LW
Same as D3204-2LW
W
Dimensions D320x Color Change Kits
D32CK
—
II, WW,
AA, GG,
EE, SW
2.65 (67.3)
2.63 (66.8)
2.84 (72.1)
4.73 (120.1)
2.26 (57.4)
Architectural Lighting Control Systems
Dimensions D3206 Multizone Controller/Dimmer—
Self-contained dimmer with learning IR receiver. Controls
up to 6 local zones and a maximum of 186 remote zones.
Features 8 scene buttons and 32-scene capability. LCD
with wizard menus. Supplies 24VDC @ 150mA power to
hardwired control devices.
LOAD RATING
120V AC 60Hz:
W
1920W/VA total output,
1000W/VA max. per zone,
1200W/VA max. per side.
For use with Incandescent, Tungsten,
Magnetic Low Voltage Transformer,
Advance Mark 10™ Powerline
Electronic Fluorescent Dimming
Ballast, Neon, Cold Cathode
and non-dimming loads.
Electronic Low Voltage and 0-10V DC
Fluorescent Hi-Lume and
Eco-10 controlled with optional
power extenders.
*COLOR/CONTROLLERS
8.80 (223.5)
Available with White Frame/White Cover
(-1LW) or (-2LW). For other colors, order
Cat. No. D32CK Color Change Kit and
add suffix as follows: Ivory Frame/Ivory
Cover (-II), White Frame/White Cover
(-WW), Almond Frame/Almond Cover
(-AA), Gray Frame/Gray Cover (-GG),
Black Frame/Black Cover (-EE), White
Frame/Smoke Cover (-SW).
C
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
3
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
DIMENSIONS® ARCHITECTURAL LIGHTING CONTROL SYSTEM FEATURES
Commercial Grade Lighting Controls
Dimensions D3200 Architectural Lighting Control System
2.69 (68.3)
3.28 (83.3)
4.71 (119.6)
Dimensions D3200 System Components
1.10
(27.9)
NE505
CAT. NO.
LOAD RATING
COLOR*
Scene Controller—Decora-style 5-button wall
controller with 4 scene recall buttons
plus OFF. Features learning IR receiver.
NE505
Input Voltage: 24VDC
Input Current: 24mA
White with
Ivory Color
option*
NE505 Color Change Kit with Customizable Labels
(wallplates sold separately)
DCK05-0C
—
I, W, A,
G, E
Decora Partition Controller–with 5 buttons
(4 walls and Reset). For use in D3208 system.
NE515
Input Voltage: 24VDC
Input Current: 24mA
White
with
Ivory
Color
option*
Infrared Remote Control—Handheld remote
for use with any IR-receiving D3200 Controller.
Provides 8 scene selections, group DIM/BRIGHT,
Max and OFF buttons.
NE210
No load rating—
for use with any
IR-receiving D3200
Controller
Black
Terminator Block—For use with LCnets not terminated NE600
with D3200s and with total wire length greater than 10 ft.
No load rating
White
SmartJack—Decora-style jack enables D3200 Setup
Software to be run from PC or laptop. Includes PC
cable and Software CD. Essential for any LCnet
system where PC interface is desired.†
NE100-00C
No load rating
White with
Ivory Color
option*
Power Extenders—Extend the power handling
capacity of any D3206/D3208 dimming zone or
activates auxilary zones.
See page C7
for complete
listing
Models available for
incandescent, magneticlow voltage, electronic lowvoltage, Advance Mark 7™
0–10V or equivalent and
0–10VDC dimmable
electronic fluorescent ballasts.
See page C8 for ratings.
See page C7
0.84
(2.1)
†Software can be downloaded from www.leviton.com/D3200
6.79 (172.8)
Architectural Lighting Control Systems
1.75 (44.5)
DESCRIPTION
Dimensions D3200
D
SPECIFICATIONS AND FEATURES
2.00 (50.8)
NE210
D3204 and D3206
• 41 internally-driven dimming loads (D3206); 4 for
D3204
• Controls up to 186 remote zones via Leviton
Control Network (LCnet) bus (D3206); D3204
controls up to 248
• 6 (D3206) and 4 (D3204) Scene buttons and
32-scene capability
• 2-line, 32-character LCD with Wizards for easy setup
• LED Light-level indicators
• Group raise/lower buttons for changing all zone light
levels at same time
• Learning IR Receiver
• Powers LCnet controllers and Leviton SmartJack
• Mounts in 4-gang box with 4-gang device cover
• UL Listed, CSA Certified
• California Title 24 compliant and meets ASHRAE
Standard 90.1 requirements
• Backed by a Limited Two-Year Warranty
D3208 Additional Features
• Up to 64 scheduled scene changes based on time
of day or astronomical clock
• Combine/Separate functionality for 8 partitions in up
to 256 different configurations
• Controls up to 248 remote zones
• Easy front panel access to 2 auxiliary LCnet dimming
zones or switching loads
APPLICATIONS
•
•
•
•
•
•
•
•
•
Home Theaters
Great Rooms
Ballrooms
Conference Rooms
Restaurants
Executive Offices
Surgical Suites
Houses of Worship
Light Commercial Applications
D3200 System Components
*COLOR/COMPONENTS
Cat Nos. NE505, NE515 and NE100 come in White
with matching wallplate. Include snap-on Ivory Color
Change Kit. (Ivory wallplate sold separately). With
DCK05-0C Color Change Kits add to suffix as follows:
Ivory (I), White (W), Almond (A), Gray (G), and
Black (E).
TESTING AND CODE COMPLIANCE
• UL Listed, CSA Certified, FCC Part 15
(where applicable)
• Backed by a Limited Two-Year Warranty
C
learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
4Courtesy of Steven Engineering,To Inc.
● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
DIMENSIONS® ARCHITECTURAL LIGHTING CONTROL SYSTEMS
Commercial Grade Lighting Controls
Dimensions D4000 Series Architectural Lighting Control System
The Dimensions D4000 Series offers a wide range of entry stations and accessories for a
powerful and flexible lighting control solution. Easy to install, configure and operate, D4000
Series products are scalable for every application from stand-alone systems to a complete
network environment.
Product Compatibility Chart
PRODUCTS BEING CONTROLLED
D4000
D4200 D4200 iSeries e Z-MAX
Closure
Series
Entrance Partition a-2000 Network
/D4104/
Input/
Controllers Stations Stations
MDS
Panels NPC D4106 D4200 D4206 D4006 Output AV
D4104/
Yes
Yes
—
—
—
—
—
—
—
—
—
D4106
D4200
Yes
Yes
Yes
Yes
Yes
—
Yes
Yes
Yes
Yes
Yes
D4206
Yes
Yes
Yes
Yes
Yes
—
Yes
Yes
Yes
Yes
Yes
D8000
—
—
Yes
Yes
Yes
—
—
Yes
Yes
Yes
Yes
D4200
SPECIFICATIONS AND FEATURES
•
•
•
•
•
•
•
•
•
•
Up to 32 zones/channels of control
Up to 6 Internal Network Dimmers
Scene memory 16 + 2
Fade times for each scene
Room partition control
Remote dimmer configuration
Includes Lockout and Sequencer
Complete multi-event scheduler
Integrated astronomical time clock
Dimmer Rating for Incandescent, Advance Mark
10®*, Lutron Tu-Wire®* and Magnetic Low Voltage
load types:
- 120V: Max 1,000W per Dimmer; Max 1,920W per
unit (continuous); Max 1,200W per side
- 230V: Max 800W per Dimmer; Max 2,420W per
unit (continuous); Max 1,200W per side
D4104/D4106 Stand-Alone Systems
• Compatible with Entry and Room Combine Stations
• Used when integration with other product or rooms
is not required.
• 4 or 6 channels and dimmers
D4200 Network Controller
• Full network compatibility
• 32 control channels
• Used to control other dimmers or relays on the
Luma-Net network
D4206 Network Controller w/Dimmers
• Full network and device compatibility
• 32 control channels
• Used to control other dimmers or relays on the
Luma-Net network
• 6 internal dimmers
D4006 Remote Dimmer
• Full network compatibility
• Controllable by any network controller
• Start channel and Network ID (address) set from
front panel
• Full configuration from any connected D4200
or D4206
• 6 internal dimmers
Entrance Stations
• Connect to controller via Luma-Net network
• Used to remotely control scenes and zones on a
master station
Command Stations
• Connect to controller via Luma-Net network
• Used to execute commands on a master station
Room Combine Stations
• Connect to controller via Luma-Net network
• Requires 1 Master station in each room, addressed
10 for room 1, 20 for room 2, etc.
• Other room-combine options available, contact your
local sales agent for more information
APPLICATIONS
•
•
•
•
•
•
•
•
•
Ballrooms
Cafeterias
Auditoriums
Lecture Halls
Conference Rooms
Hotel Suites
Restaurants
Museums
Houses of Worship
Architectural Lighting Control Systems
D42P8-00W
* Mark 10 ® is a registered trademark of Advance Transformer Company.
Lutron Tu-Wire ® is a registered trademark of Lutron Electronics Co., Inc.
C
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
5
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
DIMENSIONS® ARCHITECTURAL LIGHTING CONTROL SYSTEMS
Commercial Grade Lighting Controls
Dimensions D4000 Series Architectural Lighting Controls
DESCRIPTION
120V, 4 Channels/Dimmers, Stand-Alone System
230V, 4 Channels/Dimmers, Stand-Alone System
120V, 6 Channels/Dimmers, Stand-Alone System
230V, 6 Channels/Dimmers, Stand-Alone System
Network Controller
120V, 6 Channels/Dimmers, Network Controller w/Dimmers
230V, 6 Channels/Dimmers, Network Controller w/Dimmers
120V, 6 Channels/Dimmers, Remote Dimmer
230V, 6 Channels/Dimmers, Remote Dimmer
2.69 (68.3)
3.28 (83.3)
4.71 (119.6)
Dimensions D4000 Series Lighting Controller
CAT. NO.
D4104-1LW
D4104-2LW
D4106-1LW
D4106-2LW
D4200-00W
D4206-1LW
D4206-2LW
D4006-1LW
D4006-2LW
Dimensions D4000 Series Wall-Mounted Remote Stations
1.20
(30.6)
2.69 (68.3)
4.71 (119.6)
D42P8-00W
3.28 (83.3)
Architectural Lighting Control Systems
1.75 (44.5)
One-button Start/Stop Sequencer
One-button Start/Stop Event Timer
One-button Join/Separate Link
One-button Lock/Unlock
Two-button: Preset Scene 1 and OFF, built-in IR receiver
Two-button: Master Raise and Lower, built-in IR receiver
Two-button: Preset Scene Max and OFF, built-in IR receiver
Three-button: Preset Scene 1, Max and OFF, built-in IR receiver
Four-button: Max, OFF, Master Raise and Lower, built-in IR receiver
Five-button: Preset Scenes 1–4 and OFF, built-in IR receiver
Five-button: Preset Scene 1, Max, OFF, Master Raise and Lower, built-in IR receiver
Eight-button: Preset Scenes 1–4, Max, OFF, Raise and Lower, built-in IR receiver
Eight-button: Preset Scenes 9–16
Ten-button: Preset Scenes 1–8, Max and OFF, built-in IR receiver
Ten-button: Preset Scenes 9–16, Raise and Lower, built-in receiver
D42SQ-00W
D42ET-00W
D42LI-NKW
D42LO-CKW
D42P1-00W
D42RL-00W
D42MO-00W
D42P1-M0W
D42MO-RLW
D42P4-00W
D42P1-RLW
D42P4-RLW
D42P9-16W
D42P8-00W
D42P9-RLW
Dimensions D4000 Series Room-Combine Stations
1.75 (44.5)
D42CS-03W
0.84
(2.1)
1.20
(30.6)
One-button: Combines 2 rooms with 1 partition
Three-button: Combines 3 rooms with 3 partitions
Four-button: Combines 4 rooms with 4 partitions
Two-button: Combines 3 rooms with 2 partitions
Three-button: Combines 4 rooms with 3 partitions
D42CS-01W
D42CS-3AW
D42CS-04W
D42CS-02W
D42CS-03W
Dimensions D4000 Series IR Handheld Controls†
Four Preset Scenes
Eight Preset Scenes
Sixteen Preset Scenes
D42IR-04L
D42IR-08L
D42IR-16L
†Remote IR Ceiling-Mount Receivers available in single-gang and 2-gang models. Consult your Leviton representative for
more information.
See page C5 For Dimensions D4000 Series Specifications and Features
2.25 (57.2)
2.69 (68.3)
6.79 (172.9)
2.42 (61.2)
1.95 (49.5)
2.00 (50.8)
C
D42IR-16L
learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
6Courtesy of Steven Engineering,To Inc.
● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
POWER EXTENDERS for ARCHITECTURAL LIGHTING CONTROL SYSTEMS
Commercial Grade Lighting Controls
Standard Power Extenders
RATING
PE100-10W
Input Voltage: 120V 50/60Hz
Load Rating: 1920W/VA
Load Output Power: phase independent
of control device
Dimmer Input: 120V 50/60Hz
Extends dimming zone capacity to full 1920VA @ 120V
for Mark 10™ Powerline, Hi-Lume®, or equivalent
dimmable fluorescent ballast. Aluminum heat sink with
snap-on white cover
PE200-10W
Input Voltage: 120V 50/60Hz
Load Rating: 1920VA
Load Output Power: phase independent
of control device
Dimmer Input: 120V 50/60Hz
Extends dimming zone capacity to full 3000VA @ 277V
for Mark 10™ Powerline, Hi-Lume®, or equivalent
dimmable fluorescent ballast. Aluminum heat sink with
snap-on white cover
PE200-70W
Input Voltage: 277V 50/60Hz
Load Rating: 3000VA
Load Output Power: phase independent
of control device
Dimmer Input: 120V 50/60Hz
Extends dimming zone capacity to full control
of a 20A circuit with 0–10 V DC Mark 7® 0–10V,
Lutron 0–10V, OSRAM Sylvania Quicktronic® Helios™
or equivalent ballast. Metallic silver color.
PE300-D0W
Input Voltage: 120V AC to
277V AC, 60Hz
Load Rating: 20A–2400VA @ 120V AC,
5500VA @ 277V AC
Power Consumption: 6W @ 120V AC,
18W @ 277V AC
Output Ballast Control: 0–10V DC
Dimmer Input: 120V 60Hz
Extends dimming zone capacity to full control of a
1000W/VA @ 120V AC for electronic low voltage or
incandescent lighting. Aluminum heat sink with
snap-on white cover
PE400-10W
Input Voltage: 120V AC 50/60Hz
Load Rating: 1000W/VA
Load Output Power: phase independent
of control device
Dimmer Input: 120V 60Hz
Mark 10™ and Mark 7™ are trademarks of Advance Transformer Company.
Hi-Lume® is a registered trademark of Lutron Electronics Co., Inc.
4.50 (114.3)
2.06
(52.3)
PE100/200/400/AUX/AU7
4.30 (109.2)
CAT. NO.
Extends dimming zone capacity to full 1920W/VA @ 120V
for incandescent, magnetic low-voltage, halogen or
neon/cold cathode lighting. Aluminum heat sink with
snap-on white cover
Auxillary-Zone Network Power Extenders (for D3200 Systems only)
DESCRIPTION
CAT. NO.
RATING
Enables 2 auxiliary zones on a D3200 Controller/Dimmer
for full control over incandescent, magnetic low-voltage,
or neon/cold cathode lighting. Aluminum heat sink with
snap-on white cover
PEAUX-12W
Input Voltage: 120V AC 50/60Hz
Load Rating: 1920W/VA total,
or 1000W/VA max. per zone
Load Output Power: phase independent
of control device
Dimmer Input: D3200
Enables 1 auxiliary zone on a D3200 Controller/Dimmer
for full control over incandescent, magnetic low-voltage,
or neon/cold cathode lighting Aluminum heat sink with
snap-on white cover
PEAUX-AUW
Enables 1 auxiliary zone on a D3200 Controller/Dimmer
for full control over Mark 7™ 0-10V, OSRAM
Sylvania Quicktronic Helios, Lutron 0-10V, or equivalent
ballasts. Aluminum heat sink with snap-on white cover
PEAU7-M1W
Input Voltage: 230V AC 50/60Hz
Load Rating: 2400 W/VA total
Load Output Power: phase independent
of control device
Dimmer Input: D3200
Input Voltage: 120-230V 50-60Hz
Output Ballast Control: 0-10V DC
Load Rating: 20A-120V & 10A-230V
Load Output Power: phase independent
of control device
Dimmer Input: D3200
Power Extender Compatibility
Standard Power Extenders work with any Dimensions Multizone Controller/Dimmer and all Architectural
Systems. Refer to the chart below for compatibility with Leviton Box-Mounted Dimmers.
POWER EXTENDER
BOX-MOUNTING DIMMER COMPATIBILITY
PE100-10W
Must use 120V 600W Incandescent version of Acenti, IllumaTech, Mural,
True Touch, ToggleTouch, Sure Slide and Home Controls. (or 600VA
version of Acenti). For Monet, use 120V 600VA Magnetic Low-Voltage
version (requires Neutral wire). For dimmers that include a Neutral wire,
the dimmer Neutral wire must be connected.
PE200-10W
PE200-70W
Must use 120V 600VA Mark 10 version Acenti, of Monet, IllumaTech, and
Mural. For dimmers that include a Neutral wire, the dimmer Neutral wire
must be connected. For Hi-Lume ballasts, use incandescent dimmers.
PE200-70W is compatible with all 600VA-220V box-mounted dimmers.
PE300-D0W
Must use 120V 600W Incandescent version of Acenti, llumaTech, Mural,
True Touch, ToggleTouch, Sure Slide and Home Controls. For Monet,
use 120V 600VA Magnetic Low-Voltage version (requires Neutral wire).
For dimmers that include a Neutral wire, the dimmer Neutral wire must
be connected.
PE400-D0W
Must use 120V 600W Incandescent version of Acenti, llumaTech, Mural,
True Touch, Trimatron and Sure Slide Home Controls. For Monet, use
120V 600VA Magnetic Low-Voltage version (requires Neutral wire). For
dimmers that include a Neutral wire, the dimmer Neutral wire must be
connected.
4.00 (101.6)
3.62
(91.9)
PE300-DOW
SPECIFICATIONS AND FEATURES
Standard Power Extenders
• Emulates characteristics of dimmer it
is connected to in terms of dimming
range and resolution
• Low-end trim available for setting
minimum brightness level (PE100,
PE200, PE300)
• PE100, PE200 and PE400 can be
surface or flush mounted using 1900
Box and 2-gang raised cover
• PE300 mounts in 4" square box
Architectural Lighting Control Systems
DESCRIPTION
4.72 (119.9)
Power Extenders—PE100, PE200, PE300, PE400
APPLICATIONS
Standard Power Extenders
• Works with any D3200 Multizone
Controller/Dimmer to extend load
capacity of any zone
• Extends load capacity of box-mounted
dimmers (see compatibility chart)
• Works with all families of Leviton
Architectural Systems
Network Power Extenders
• Enables a D3200 Multizone
Controller/Dimmer to accommodate
extra loads
• Works with any D3200 Multizone
Controller/Dimmer to extend load
capacity of any zone
TESTING AND CODE COMPLIANCE
• UL Listed (except PEAUX-AUW), CSA
Certified and NOM Certified
• Backed by a Limited Two-Year
Warranty
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
C
7
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
ARCHITECTURAL DIMMING CABINETS
Commercial Grade Lighting Controls
a-2000® Modular Dimming Cabinets
The a-2000® is a compact, high-performance dimming cabinet that combines theatrical grade
performance with the ability to control a wide variety of architectural load types. Its modular design
enables rapid servicing of both dimming modules and control electronics. The a-2000 digital
module cabinets are easy to install and work with virtually all types of lighting, including 120
and 277VAC dimming fluorescent lamps. This state-of-the-art cabinet integrates seamlessly with
preset or manual controls, building automation, daylight harvesting and time clock systems. The
a-2000 is a highly versatile dimming platform supporting a broad array of control requirements.
Built-in DMX512 input for simple
integration of theatrical control
Architectural Lighting Control Systems
a-2000-24
LCD Screen for easy,
menu-driven setup
Reliable fan-cooled design
24-Channel a-2000
Front-mounted bypass switches
for dimmer override
For complete ordering information
on Leviton a-2000 Dimming Cabinets
consult your Leviton representative.
Slide-in dimmer modules for tool-free service
Contractor friendly wireways with generous knuckle room
SPECIFICATIONS AND FEATURES
• Fully programmable from front panel
• Plug-in dimmer modules for easy maintenance
• Communication inputs: DMX512, Luma-Net III,
RS485, full bright, emergency, and +0-10VDC
analog
• Capacity of up to 48 dimmer circuits
• Each dimmer channel rated to 20A continuous
(20A modules only)
• All load types supported
• Rugged dual-SCR dimmer circuitry for superior
dimming performance and reliability over triac
dimmers
• Individual bypass per-dimmer provides work-light
function
• Restoration feature restores the last lighting look
in the event of power failures
• Lifetime non-volatile memory
• Super-quiet, redundant ball-bearing fan design
for added reliability
• Contractor-friendly design for easy installation
with a large wiring space
• Compact 30-3/8 inch cabinet width holds up to
24 dimmer CCTS and fits between two stud
widths
• Surface or recessed mounting
• Top, bottom or side feed
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
Office spaces
Daylight harvesting
Cafeterias
Ballrooms
Auditoriums
Houses of worship
Lecture halls
Conference rooms
Restaurants
Multi-purpose rooms
Office spaces
Spaces requiring a single dimming source for a
broad range of loads
C
learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
8Courtesy of Steven Engineering,To Inc.
● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
ARCHITECTURAL DIMMING CABINETS
Commercial Grade Lighting Controls
a-2000® Dimmer Modules
The a-2000 uses a modular dimmer, allowing for ease of replacement and custom tailoring of
module type to each project’s specific needs. Leviton’s a-2000 dimmer modules employ
proven dual SCR dimming technology, inherited from Leviton’s line of theatrical equipment.
UNIVERSAL
x
x
x
x
x
x
x
240V
x
x
x
x
x
x
x
STANDARD
x
x
x
x
x
x
x
x
x
x
x
–
x
x**
–
–
a-2000-24 with Relay Cabinet
* Electronic Low Voltage transformers are supported upon the manufacturer’s approval for use with forward phase
dimmers. When the use of Electronic Low Voltage is required that does not meet this requirement, Leviton’s PE400 power
extender may be used. Contact your local Leviton LMS representative for more information.
** Supports all standard load types as well as 2 circuits of Hi-lume and other 3-wire fluorescent dimming ballasts.
† Mark 7 ® and 10 ® are registered trademarks of Advance Transformer Company.
Eco-10™ is a trademark and Hi-lume ® is a registered trademark of Lutron Electronics Co., Inc
SPECIFICATIONS AND FEATURES
• 20A continuous duty rating (120V modules only)
• Voltage regulation: compensates for incoming line
voltage variations
• 97% efficiency
• 350¨µS rise time standard
• Ratings are for continuous use at 100% load
Universal Modules:
• Bypass switch has two modes: Normal and Bypass.
When the switch is set to Bypass (red LED illuminated), the SCRs and relays are forced to turn on
independent of the control module
Architectural Lighting Control Systems
SUPPORTED LOAD TYPE
Incandescent
Tungsten
Neon
Cold-Cathode
Magnetic Low Voltage
Electronic Low Voltage*
Fluorescent Dimming Ballasts
0–10V Fluorescent Ballast Example†:
Advance Mark 7®
2-Wire Fluorescent Ballast Example†:
Advance Mark 10 ®
3-Wire Fluorescent Ballast Examples†:
Lutron Hi-lume® & Eco-10™
• 277V Universal modules may be used in 120V
cabinets.
• 120V Universal modules may be used only in 120V
cabinets.
240V Modules:
• Built-in bypass switches (240V): Bypasses control
electronics permitting the cabinet to be used for
work lights during construction.
Standard Modules:
• Built-in bypass switches (120V) or shunts (277V):
Bypasses control electronics, permitting the cabinet
to be used for work lights during construction.
C
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
9
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
ARCHITECTURAL SPECIFICATIONS LIGHTING CONTROLS FEATURES
Commercial Grade Lighting Controls
Architectural Specification Lighting Controls
Inspired by the great painters, Leviton’s Monet®, Renoir® and Van Gogh® dimmers and fan speed
controls accent today’s most beautiful interiors. Leviton’s premier line of architectural lighting
controls can accommodate high wattage loads and mate with screwless narrow- and wide-fin
wallplates—for the ultimate flexibility in design.
Architectural Specifications Lighting Controls
Internal surge-protective MOV
Extruded aluminum heat sink
Locator LED illuminates for
easy location in dark
Built-in radio/TV
interference filter
Copper heat
spreader
Air-gap switch
eases service
Highly reliable triac
Monet ® MNI06-1LW
Full range slider for
smooth, precise dimming
Features and Benefits
I
Full-range dimming for both single-pole and multilocation control
I Accommodates high-power loads
I Low profile, designer styling; mates with narrow- and
wide-fin screwless wallplates
I
Wide range of colors available through convenient
color change kits
I UL and CSA Listed
I Backed by a Limited Five-Year Warranty
ARCHITECTURAL SPECIFICATION DIMMING AND FAN SPEED CONTROLS
Monet® Slide Dimmer
Low-profile architectural
controls with advanced
features. With narrow or
wide fin. Matte finish.
Custom-engraved
wallplates available.
MNI06-1LW shown
Renoir® Slide Dimmer
Rugged, full-range preset
slide dimmer for highpower loads. With narrow
or wide fin
81000-W shown
Van Gogh® Rotary Dimmer
Architectural yet classic
full-range rotary dimmer for
high-power incandescent
loads. Rugged design.
60800-W shown
C
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
10
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
MONET® LIGHTING CONTROLS • 600–1200 WATTS • 120–277V AC 60Hz
Commercial Grade Lighting Controls
Monet Architectural Specification Grade Preset Controls
120V and 277V AC 60Hz
4.72 (119.9)
Low-profile Architectural Decora Digital Preset Slide Dimmers with LED locator light. Most
Monet dimmers provide single-pole (1 location) and 3-way (multi-location) control with
Switching Remote.
Incandescent 120V AC U R
CAT. NO.
MNI06-1LW
MNI10-1LW
MNI15-1LW
MNI06-10W
RATING
600W
1000W
1500W
600W
COLOR CHANGE KIT
I, W, A, G, E, B
I, W, A, G, E, B
I, W, A, G, E, B
I, W, A, G, E
MNI10-10W
1000W
I, W, A, G, E
2.75 (69.9)
MNI06-1LW
CAT. NO.
MNE04-1LW
MNM06-1LW
MNM10-1LW
MNM15-1LW
RATING
400VA (320W)
600VA (450W)
1000VA (800W)
1500VA (1200W)
COLOR CHANGE KIT
I, W, A, G, E, B
I, W, A, G, E, B
I, W, A, G, E, B
I, W, A, G, E, B
CAT. NO.
MNX10-1LW
MNX15-1LW
MNX20-7LW
RATING
1000VA 120V AC
1500VA 120V AC
2000VA 277V AC
COLOR CHANGE KIT
I, W, A, G, E, B
I, W, A, G, E, B
I, W, A, G, E, B
MNX30-7LW
3000VA 277V AC I, W, A, G, E, B
Mark 10™ Fluorescent Ballast 120 and 277V AC U R
For Advance Mark 10™ Powerline fluorescent dimming ballasts.
DESCRIPTION
Monet Mark 10 Fluorescent Dimmer (narrow fin)
Monet Mark 10 Fluorescent Dimmer (wide fin)
Monet Mark 10 277V Fluorescent Dimmer
(narrow fin)
Monet Mark 10 277V Fluorescent Dimmer
(wide fin)
4.72 (119.9)
Low-Voltage 120V AC U R
DESCRIPTION
Monet Dimmer (narrow fin) Electronic
Monet Dimmer (narrow fin) Magnetic
Monet Dimmer (narrow fin) Magnetic
Monet Dimmer (wide fin) Magnetic
4.25 (108.0)
Fan Speed Controls 120V AC U R
DESCRIPTION
Monet Fan Speed Control (narrow fin)
Monet Fan Speed Control (wide fin)
1.57
(39.9)
MNI15-1LW
CAT. NO.
MNF07-1LW
MNF10-1LW
RATING
7.5A 120V AC
10A 120V AC
COLOR CHANGE KIT
I, W, A, G, E, B
I, W, A, G, E, B
DESCRIPTION
Monet Remote Non-Dimming Switching
Unit for 3-Way Applications
(Unlighted)
CAT. NO.
MN00R-D0W
COLOR CHANGE KIT
I, W, G, E, A
Color Change Kits for MN00R-D0W Monet
3-Way Switching Unit
Color Change Kit for Narrow Fin Monet
Lighted Controls
Color Change Kit for Wide Fin Monet
Lighted Controls
Color Change Kit for Monet Unlighted Dimmers
Monet Adapter Plate: Allows any Decora
strap-mount device to be ganged with
either small or large-size Monet controls.
In multi-gang installations, must use on ends
MNK0R-00
RATING
No load rating,
use with
120V & 277V
Monet
dimmers only
—
I, W, G, E, A
MNKIT-SL
—
I, W, A, G, E, B
MNKIT-1L
—
I, W, A, G, E, B
MNKIT-S0
MN0LA-000
(large)
MN0SA-000
(small)
—
—
I, W, A, G, E
Metal
Heat Sink
0.24
(6.1)
Note: Mark 10 ® is a trademark of the Advance Transformer Company.
NOTE: Multi-gang wallplates are available for combining narrow and wide dimmers, with or without fins removed. Refer to page C13.
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral to
each phase. Consult Leviton Techline if problems persist.
Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructions included
with each device. They can be used in conventional 3-way and 4-way wiring circuits only when the Control is properly
connected to the load as indicated by the device’s wiring instructions.
2.64 (67.1)
3.28 (83.3)
4.72 (119.9)
Monet Accessory Products
2.75 (69.9)
MN00R-D0W
Architectural Specification Lighting Controls
DESCRIPTION
Monet Dimmer (narrow fin)
Monet Dimmer (narrow fin)
Monet Dimmer (wide fin)
Monet Incandescent Dimmer, Single-Pole,
Unlighted (narrow fin)
Monet Incandescent Dimmer, Single-Pole,
Unlighted (narrow fin)
2.64 (67.1)
0.24
(6.10
1.57
(39.9)
Monet Architectural Fin Width
Narrow: 2.75" (69.9 mm)
Wide: 4.25" (108.0 mm)
CAUTION ON RETROFITS: When
retrofitting Mark 10® Powerline dimming ballasts into fixtures that originally had Instant Start ballasts, the
sockets MUST be replaced with Rapid
Start sockets to allow proper dimmer
operation and prevent damage to the
dimming ballast. Refer to the instructions provided with the ballast and the
Leviton dimmer.
See page C12 for Monet Specifications and Features
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
C
11
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
MONET® LIGHTING CONTROLS • 20 AMP 120 and 120/277V
Commercial Grade Lighting Controls
Monet Architectural Specification Grade Controls
Monet Switches U R
CAT. NO.
MNS20-1L
RATING
20A 120V AC
MNS20-D3
20A 120/277V AC I, W, A, G, E
MNS20-D4
20A 120/277V AC I, W, A, G, E
COLOR*
I, W, A, G, E
.40 (10.2)
2.60 (66.0)
4.72 (119.8)
MNS20-1LW
3.28 (83.3)
Architectural Specifications Lighting Controls
DESCRIPTION
Monet Single-Pole Rocker Switch with Screw
Terminals, Lighted (narrow fin)
Monet 3-Way Rocker Switch with Screw
Terminals, Unlighted (narrow fin)
Monet 4-Way Rocker Switch with Screw
Terminals, Unlighted (narrow fin)
1.04 (26.4)
2.75 (69.9)
MNS20 shown
SPECIFICATIONS AND FEATURES
• Premier Architectural Specification Grade dimmer
combines high load capability, esthetic appearance,
digital circuitry and Scene Lighting capabilities
• Provides single-pole and 3-way switching with
Monet Non-Dimming Remote Unit
• Low-profile architectural fins, even on wide-fin
models, for a flush fit appearance
• Smooth slide-dimming operation. Push slider for
ON/OFF preset
• Digital circuit provides Soft-ON/Fade-OFF for
eye-pleasing effect and prolonged bulb life
• Specially designed to minimize shadows with nonreflective, easy-to-clean matte finish. Ideal for
museums, art galleries, showrooms
• Soft, green locator LED discretely positioned
on slider
• Square Law Dimming ensures linear slide control
across entire dim and bright output range
• Hidden air-gap switch; slider moves into hidden keyway to access air-gap switch for servicing needs.
When air gap switch is open, red line appears at top
• Small and large size adapter plates fit all Leviton
Decora straps to make them compatible with
Monet wallplates
• Screwless, designer Monet wallplates with matte
finish included. Multi-gang wallplates also available
for combining narrow and wide dimmers, with or
without fins removed (see page C13)
• Customized wallplate engravings available—See
your Leviton representative for more information
• Built-in radio/TV interference filter
• Protected memory during temporary power failures
• Internal MOV for surge protection
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Two-Year Warranty*
*COLOR
Cat. No. denotes White device. For other colors,
order Color Change Kits and add suffix as follows:
Ivory (-I), White (-W), Gray (-G), Black (-E), Brown
(-B) and Almond (-A). Monet Rocker Switches listed
above do not use Color Change Kits–Add suffix to
basic Cat. No. for color selection.
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
C
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
12
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
MONET® WALLPLATE SPECIFICATIONS
Commercial Grade Lighting Controls
Monet Multi-Gang Wallplates
TABLE 1 — FOR INSTALLATIONS WITH NO FINS BROKEN OFF
Wallplate Cat. No.
Number of Narrow
Wallbox
Fin/Wide Fin Controls
Requirements
Monet multi-gang wallplates are available for every permissible combination of small fin and large fin dimmers. Tables 1 and 2 can be used
to determine if a specific combination of devices is possible. When
small and large fin devices are combined, all the large fin devices
must be placed to one side and all the small fin devices must be
placed to the other side. In an installation where all the fins are broken
off, do not remove the fins from the dimmers at each of the extreme
ends of the installation.
MNW10-00
1 Narrow
1-Gang
MNW20-00
2 Narrow
3-Gang
MNW30-00
3 Narrow
5-Gang
MNW40-00
4 Narrow
6-Gang
MNW50-00
5 Narrow
9-Gang
MNW60-00
6 Narrow
10-Gang
MNW01-00
1 Wide
1-Gang
MNW02-00
2 Wide
4-Gang
MNW03-00
3 Wide
7-Gang
MNW04-00
4 Wide
9-Gang
MNW11-00
1 Narrow/1 Wide
4-Gang
MNW21-00
2 Narrow/1 Wide
5-Gang
MNW31-00
3 Narrow/1 Wide
7-Gang
MNW41-00
4 Narrow/1 Wide
8-Gang
Number of small-fin devices
MNW51-00
5 Narrow/1 Wide
10-Gang
Monet Wallplate
MNW12-00
1 Narrow/2 Wide
6-Gang
MNW22-00
2 Narrow/2 Wide
8-Gang
MNW32-00
3 Narrow/2 Wide
9-Gang
MNW13-00
1 Narrow/3 Wide
9-Gang
MNW23-00
2 Narrow/3 Wide
10-Gang
Example: MNW31-00W
Add letter to indicate color:
-I (Ivory), -W (White), -A (Almond), -G (Gray)
and -E (Black)
00 = No fins removed
FB = Fins broken off
Number of large-fin devices
Maximum Load per Monet Dimmer Multi-Gang with Fins Broken Off
Cat. No.
Single
2-Gang
More Than
2-Gang
MNE04
400VA (320W)
300VA (240W)
250VA (200W)
MNF07
7.5A
6A
5.3A
MNF10
10A
8A
7A
MNI06
600W
500W
400W
1000W
800W
700W
1000W
MNW20-FB
2 Narrow
2-Gang
MNI10
MNW30-FB
3 Narrow
3-Gang
MNI15
1500W
1250W
MNW40-FB
4 Narrow
4-Gang
MNM06
600VA (450W)
500VA (375W)
400VA (300W)
1000VA (800W)
800VA (640W)
700VA (560W)
1000VA (800W)
MNW50-FB
5 Narrow
5-Gang
MNM10
MNW60-FB
6 Narrow
6-Gang
MNM15
1500VA (1200W)
1250VA (1000W)
MNW70-FB
7 Narrow
7-Gang
MNX10
1000VA (980W)
800VA (784W)
700VA (686W)
1500VA (1470W)
1250VA (1225W)
1000VA (980W)
MNW80-FB
8 Narrow
8-Gang
MNX15
MNW90-FB
9 Narrow
9-Gang
MNX20-7
2000VA (1960W)
1600VA (1568W)
1400VA (1372W)
MNW02-FB
2 Wide
3-Gang
MNX30-7
3000VA (2940W)
2500VA (2450W)
2000VA (1960W)
5-Gang
4 Wide
7-Gang
MNW05-FB
5 Wide
9-Gang
MNW11-FB
1 Narrow/1 Wide
3-Gang
MNW21-FB
2 Narrow/1 Wide
4-Gang
MNW31-FB
3 Narrow/1 Wide
5-Gang
MNW41-FB
4 Narrow/1 Wide
6-Gang
MNW51-FB
5 Narrow/1 Wide
7-Gang
MNW61-FB
6 Narrow/1 Wide
8-Gang
MNW71-FB
7 Narrow/1 Wide
9-Gang
MNW81-FB
8 Narrow/1 Wide
10-Gang
MNW12-FB
1 Narrow/2 Wide
5-Gang
MNW22-FB
2 Narrow/2 Wide
6-Gang
MNW32-FB
3 Narrow/2 Wide
7-Gang
MNW42-FB
4 Narrow/2 Wide
8-Gang
MNW52-FB
5 Narrow/2 Wide
9-Gang
MNW62-FB
6 Narrow/2 Wide
10-Gang
MNW13-FB
1 Narrow/3 Wide
7-Gang
MNW23-FB
2 Narrow/3 Wide
8-Gang
MNW33-FB
3 Narrow/3 Wide
9-Gang
MNW43-FB
4 Narrow/3 Wide
10-Gang
MNW14-FB
1 Narrow/4 Wide
9-Gang
MNW24-FB
2 Narrow/4 Wide
10-Gang
3.12 (79.2 mm)
2.64 (67.1 mm)
3 Wide
MNW04-FB
6.00 (152.4 mm)
1.32
(33.5 mm)
4.85 (123.2 mm)
MNW03-FB
Note: For more information on Fin Removal, refer to the instruction sheet provided
with each Monet device.
Architectural Specification Lighting Controls
TABLE 2 — FOR INSTALLATIONS WITH FINS BROKEN OFF
Wallplate Cat. No.
Number of Narrow
Wallbox
Fin/Wide Fin Controls
Requirements
MONET MULTI-GANG WALLPLATE CATALOG NUMBER SYSTEM
0.161
(4.1 mm)
MNW20-00
C
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
13
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
RENOIR® LIGHTING CONTROLS • 800–2000 WATTS • 120 and 277V AC 60Hz
Commercial Grade Lighting Controls
Renoir Architectural Specification Preset Slide Dimmers
Renoir Incandescent 120V AC 60Hz Only U R
C
2.57 (65.3)
2.75 (69.9)
1.05
(26.6)
81000-W
DESCRIPTION
Renoir Single-Pole (narrow fin)
Renoir 3-Way (narrow fin)
Renoir Single-Pole (narrow fin)
Renoir Single-Pole, Illuminated (narrow fin)
Renoir 3-Way (narrow fin)
Renoir 3-Way, Illuminated (narrow fin)
Renoir Single-Pole (wide fin)
Renoir 3-Way (wide fin)
Renoir Single-Pole (wide fin)
Renoir Single-Pole, Illuminated (wide fin)
Renoir 3-Way (wide fin)
Renoir 3-Way, Illuminated (wide fin)
CAT. NO.
80800
80800-3
81000
81000-L
81000-3
81000-L3
81500
81500-3
82000
82000-L
82000-3
82000-L3
RATING
800W
800W
1000W
1000W
1000W
1000W
1500W
1500W
2000W
2000W
2000W
2000W
COLOR*
I, W, GY, B
I, W, GY, B
I, W, A, GY, B
I, W
I, W, A, GY, B
I, W
I, W, A, GY, B
I, W, A, GY, B
I, W, A, GY, B
I, W
I, W, A, GY
I, W
Renoir Magnetic Low-Voltage 120V AC 60Hz Only U R
DESCRIPTION
Renoir Single Pole (narrow fin)
Renoir 3-Way (narrow fin)
Renoir Single Pole (wide fin)
Renoir 3-Way (wide fin)
CAT. NO.
71111
71113
71511
71513
RATING
1000VA (800W)
1000VA (800W)
1500VA (1200W)
1500VA (1200W)
COLOR*
I, W, GY, B
I, W, B
I, W
I
Renoir Fluorescent Dimming Ballasts 120V and 277V AC 60Hz Only U R
4.50 (114.3)
Architectural Specifications Lighting Controls
4.50 (114.3)
0.75
(19.1)
DESCRIPTION
Renoir Fluorescent Dimmer,
Single-Pole and 3-Way (wide-fin)
CAT. NO.
26666-31
Renoir Fluorescent Dimmer,
Single-Pole and 3-Way (wide-fin)
26666-37
RATING
1200VA (900W) 120V AC
Advance Mark 10™ Powerline
fluorescent dimming ballast
1200VA (900W) 277V AC
Advance Mark 10™ Powerline
fluorescent dimming ballast
COLOR*
White
White
Note: For complete information on installation, ganging and derating of High Wattage Dimmers, consult Leviton's Lighting
Controls Product Selection Guide or the Dimmer Instruction Sheet provided with the device.
When ganging these units, no derating is necessary except on those units which have had both sets of snap-off, fins
removed. These shall be derated as follows:
4.50 (114.3)
82000-W
Renoir Architectural Fin Width
Narrow: 2.75" (69.9 mm)
Wide: 4.50" (108.0 mm)
CAUTION ON RETROFITS: When
retrofitting Mark 10 ® Powerline
dimming ballasts into fixtures that
originally had Instant Start ballasts,
the sockets MUST be replaced with
Rapid Start sockets to allow proper
dimmer operation and prevent
damage to the dimming ballast.
Refer to the instructions provided
with the ballast and the Leviton
dimmer.
Maximum Load per Renoir Dimmer Multi-Gang with Fins Broken Off
Cat. No.
Single
2-Gang
More Than
2-Gang
26666-31
1200VA
1100VA
1050VA
26666-37
1200VA
1200VA
1200VA
71111/3
1000VA (800W)
800VA (800W)
700VA (640W)
71511/3
1500VA (1200W)
1300VA (1200W)
1100VA (1040W)
80800
800W
700W
600W
81000
1000W
800W
700W
81500
1500W
1300W
1000W
82000
2000W
1800W
1500W
NOTE: For fin removal and switchbox requirements for ganging Leviton Renoir dimmers, refer to page C17.
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral to
each phase. Consult Leviton Techline if problems persist.
SPECIFICATIONS AND FEATURES
• ON/OFF rocker switch turns lights ON at last selected
brightness level
• Smooth-action, linear slide control for easy, precise
operation
• Available in single-pole (one location) and 3-way
(multi-location) versions. 3-way dimmer is used with
standard 3-way ON/OFF switch
• Decora-styling coordinates with Leviton’s extensive
line of Decora devices
• Decora-style screwless snap-on wallplates present an
attractive appearance in any application
• Slim, compact housing easily fits in standard wall
boxes
• Fins are easily removed for multi-gang applications
• Large radio/TV interference filter
• Illuminated versions available
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Five-Year Warranty
*COLOR
Add suffix to catalog numbers as follows for color
selection: Ivory (-I) White (-W), Almond (A), Gray (-GY),
Brown (-B)
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
14
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
RENOIR® FAN SPEED CONTROLS • 7.5–15 AMP 120V AC 60HZ
Commercial Grade Lighting Controls
Renoir Architectural Specification Preset Slide Fan Speed Controls
Renoir Fan Speed Controls 120V AC 60Hz Only U R
RATING
7.5 Amps
10 Amps
15 Amps
COLOR*
I, W
I, W
I, W
NOTE: For fin removal and switchbox requirements for ganging Leviton Renoir fan speed controls, refer to page C17.
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral to each
phase. Consult Leviton Techline if problems persist.
2.57 (65.3)
CAT. NO.
80827
81127
81527
4.50 (114.3)
DESCRIPTION
Renoir Single-Pole (narrow-fin)
Renoir Single-Pole (wide-fin)
Renoir Single-Pole (wide-fin)
0.75
(19.1)
1.05
(26.6)
80827-W
Renoir Architectural Fin Width
Narrow: 2.88" (73.2 mm)
Wide: 4.69" (119.1 mm)
SPECIFICATIONS AND FEATURES
• Smooth-action, linear slide control for easy, precise
operationr
• Manual low-end trim adjustment feature on fan
speed controls allows precise adjustment of lowend fan settings when installing device
• Decora-styling coordinates with Leviton’s extensive
line of Decora devices
• Decora-style screwless snap-on wallplate
present an attractive appearance in any
application
• Slim, compact housing easily fits in standard wall
boxes
• Fins are easily removed for multi-gang
applications
Architectural Specification Lighting Controls
2.75 (69.9)
TESTING AND CODE COMPLIANCE
• UL Listed (File # E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Five-Year Warranty
*COLOR
Add suffix to catalog numbers as follows for color
selection: Ivory (-I) White (-W).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
C
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
15
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
VAN GOGH® LIGHTING CONTROLS • 800–2000 WATTS • 120V AC 60Hz
Commercial Grade Lighting Controls
Van Gogh Architectural Specification Rotary Dimmers
Van Gogh Incandescent 120V AC 60Hz Only U R
4.50 (114.3)
2.69 (68.3)
0.75
(19.1)
DESCRIPTION
Van Gogh Single-Pole Rotary (narrow fin)
Van Gogh 3-Way Push ON/Push OFF (narrow fin)
Van Gogh Single-Pole Rotary (narrow fin)
Van Gogh 3-Way Push ON/Push OFF (narrow fin)
Van Gogh Single-Pole Rotary (wide fin)
Van Gogh Single-Pole Rotary (wide fin)
CAT. NO.
60800
60800-3
61000
61000-3
61500
62000
RATING
800W
800W
1000W
1000W
1500W
2000W
COLOR*
I, W
I, W
I, W
I, W
I, W
I, W
1.32
(33.5)
2.75 (69.9)
61000-W
Maximum Load per Van Gogh Dimmer Multi-Gang with Fins Broken Off
Cat. No.
Single
2-Gang
More Than
2-Gang
60800
800W
700W
600W
61000
1000W
800W
700W
61500
1500W
1300W
1100W
62000
2000W
1800W
1500W
NOTE: For fin removal and switchbox requirements for ganging Leviton Van Gogh dimmers, refer to page C17.
Color Change Kits for 60800, 61000 Dimmer Units
DESCRIPTION
Brown Cover and Matching Knob w/Gold Insert
Ivory Cover and Matching Knob w/Gold Insert
White Cover and Matching Knob w/ Silver Insert
4.50 (114.3)
Architectural Specifications Lighting Controls
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral to
each phase. Consult Leviton Techline if problems persist.
When ganging these units, no derating is necessary except on those units which have had both sets of snap-off, fins
removed. These shall be derated as follows:
CAT. NO.
60001
60001-I
60001-W
Color Change Kits for 61500, 62000 Dimmer Units
DESCRIPTION
Brown Cover and Matching Knob w/Gold Insert
Ivory Cover and Matching Knob w/Gold Insert
White Cover and Matching Knob w/ Silver Insert
CAT. NO.
60002
60002-I
60002-W
4.56 (115.8)
Van Gogh™ Architectural Rotary Fan Speed Control 120V AC 60Hz Only
62000-W
DESCRIPTION
Van Gogh Single-Pole (wide fin)
Van Gogh Architectural Fin Width
Narrow: 2.75" (69.9 mm)
Wide: 4.56" (115.8 mm)
CAT. NO.
61027
RATING
10 Amps
COLOR*
I, W
Note: When more than one ceiling fan is controlled, make sure the blades are rotating on all fans.
SPECIFICATIONS AND FEATURES
• Classic rotary architectural-style dimmer is a popular
choice in many installations
• Available in Rotary ON/OFF (single pole only) and
Push-ON/Push-OFF (3-way).
• 3-way version is used with a standard 3-way
ON/OFF switch
• Snap-on cover conceals heat fins
• Color-matched dimmer control knob with gold insert
for an attractive appearance in any installation
• Snap-off fins permit easy ganging with other devices
• Slim, compact housing easily fits in standard wall box
• Large radio/TV interference filter
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373, 62000 File #E-66800)
• CSA Certified (File #LR-3413)
• Backed by a Limited Five-Year Warranty
*COLOR
Add suffix to catalog number as follows for colors:
Ivory cover with Gold insert (-I), White cover with
Silver insert (-W).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
C
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
16
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
GANGING AND DERATING LIGHTING CONTROLS
Commercial Grade Lighting Controls
Ganging and Derating Box-Mounted Lighting Controls
Ganging is an installation practice where two or more lighting controls
are mounted side-by-side using the required number of connected
wallboxes. Ganging may require the removal of part of the fins on
Architectural Dimmers or part of the mounting strap on strap-mounted
devices. In Architectural Dimmers, the metallic fins help dissipate heat
from within the device. Strap mounted dimmers use the mounting
strap for the same purpose. Therefore, removing a portion of the fins or
strap for ganging purposes will require derating the dimmers to prevent
them from overheating.
Ganging and Derating Leviton Lighting Controls
When ganging Mural, True Touch, ToggleTouch and IllumaTech
controls, the side sections of the mounting strap must be removed.
Use pliers to carefully bend side sections back and forth until they
break off. The side sections of the strap dissipate heat, so removing
them requires derating the dimmer’s capacity. See Chart 1.
Note that Leviton SureSlide and Trimatron lighting controls can be
ganged without removing any sections of their mounting straps.
However, SureSlide and Trimatron controls must also be derated
when they’re ganged.
Maximum Load Per Dimmer for Multi-Ganging
All Strap-Mounted Dimmers
Dimmer
Rating
500W
600W
1000W
400VA
600VA*
1000VA
Chart 1
2-Gang
Single
500W
600W
1000W
400VA
600VA
1000VA
More Than
2-Gang
300W
400W
700W
250VA
400VA
700VA
400W
500W
800W
350VA
500VA
800VA
*Except IPX06-7, which requires no derating
Maximum Bulb Wattage for Magnetic Low-Voltage Lighting
The capacity of a magnetic low-voltage dimmer is its VA rating. If a
wattage rating is also listed (as in this book), it is merely an estimate of
the lamp wattage that can be placed on a UL-approved magnetic lowvoltage transformer without exceeding the dimmer's VA rating. (This
is, in turn, based on an estimate of transformer efficiency.)
Chart 2
Transformer
Efficiency
X 80%
X 75%
Power To
Transformer
1000VA
600VA
Lamp Load
= 800W
= 450W
When fins are broken off on wide and narrow controls for ganging purposes, the number of switch boxes required can be quickly determined by
referring to the two charts below.
Ganging
0
0
1
•
2
•
3
•
4
0
•
•
1
1
3
5
7
8
2
4
6
7
9
11
3
7
9
10
11
13
4
9
11
12
14
16
Switch boxes required
for ganging Leviton
architectural controls 0
when all inside fins
0
are removed:
0
1
2
3
4
5
6
0
1
2
3
4
5
6
1
1
3
4
5
6
7
8
2
3
5
6
7
8
9
10
3
5
7
8
9
10
11
12
4
7
9
10
11
12
13
14
5
9
11
12
13
14
15
16
6
11
13
14
15
16
17
18
Number of Wide Controls
Number of Narrow Controls*
Number of Wide Controls
Switch boxes required
for ganging Leviton
architectural controls
when no fins are removed:
Number of Narrow Controls
Lighting Controls
Ganging and Leviton Renoir® and Van Gogh® Architectural Lighting Controls
*Narrow controls must have fins broken off to be ganged.
C
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
17
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
DESIGNER CONTROL FEATURES
Commercial Grade Controls
Designer Lighting Controls
Brilliant inside and out — the Vizia ® collection includes dimmers, fan speed controls and radio frequency
(RF) products integrated into a stylish form factor. With Vizia RF, homeowners can automate lighting as
well as select appliances and electronics. The Mural ® line encompasses scene-capable enhancement
products. These designer-style devices provide full-range dimming in a sleek, Decora body that will
enhance any décor.
Back & side-wiring
screw terminals
Air gap switch
eases service
Lighting Controls
Dim/bright bar
Back & side-wiring
screw terminals
Microcontroller
with onboard
non-volatile memory
Return-toneutral
push pad
High-grade triac for
superior reliability
Robust MOV for
superior surge
protection
VZI06-IL
LED brightness
display
Built-in radio/TV
interference filter
LED indicator
Features and Benefits
I
Easy to operate for people of all ages and abilities
Digital circuitry provides eye-pleasing soft-ON/fade-OFF
that extends lamp life
I Compatible with Decora® screwless and Decora standard
designer wallplates
I
I
Wide range of colors available through convenient color
change kits
I UL and CSA Listed
I Backed by a Limited Five-Year Warranty
LEVITON DESIGNER DIMMERS FOR FULL-RANGE DIMMING
C
Vizia Controls
Vizia digital dimmer with
LED brightness level indicators, intuitive Dim/Bright
bar and return-to-neutral
pushpad. Color-change
kits available.
VZI06-1L shown
Vizia Remote Controls
Enables multi-location
dimming or fan control
when used in conjunction
with Vizia Dimmer/Fan
Speed Controls.
VZ00R-1L shown
Mural 7-Scene Controller
Decora style controller
sends commands for up to
7 distinct scenes to individual
Mural Scene-Capable
Controllers.
MN00C-1LW shown
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
18
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
VIZIA™ CONTROLS • 600–1000 WATTS • 120 AND 277V AC 60Hz
Commercial Grade Controls
Vizia Digital Controls
CAT. NO.
RATING
Vizia Incandescent Dimmer†
Vizia Magnetic Low Voltage Dimmer†
VZI06-1L
VZM06-1L
Vizia Incandescent/Magnetic Low Voltage
Dimmer†
VZM10-1L
Vizia Electronic Low Voltage Dimmer; neutral required†
Vizia Electronic Low Voltage Dimmer; neutral required†
Vizia Fluorescent Dimmer for Advance Mark 10®
Powerline or Tu-Wire® Ballasts; neutral required
Vizia Fluorescent Dimmer for Advance Mark 10®
Powerline Ballasts; neutral required
Vizia Fluorescent Dimmer for Hi-Lume® or Eco-10®
(Eco Series) Ballasts; neutral required
Vizia Fluorescent Dimmer for Hi-Lume® or Eco-10®
(Eco Series) Ballasts; neutral required
Vizia Quiet Fan Speed Control; neutral required
Vizia Switch with LED Locator; neutral required
Vizia Matching Dimmer/Fan Speed
Color Change Kit
Vizia Coordinating Dimmer/Fan Speed
Color Change Kit; no LED
Vizia Matching Switch
Color Change Kit with LED Locator
Vizia Coordinating Switch
Color Change Kit, no LED
VZE04-1L
VZE06-1L
VZX10-1L
600W 120V AC 60Hz
600VA (450W)
120V AC 60Hz
1000W Incandescent,
1000VA Magnetic Low
Voltage 120V AC 60Hz
400W 120V AC 60Hz
600W 120V AC 60Hz
1000VA 120V AC 60Hz
VZX12-7L
COLOR*
X=I+W+A
Z=I+W+T
X, Z, W
X, Z
X, Z
1.75 (44.5)
X, Z
X, Z
X, Z
1.40
(35.6)
VZI06-1LX
X, Z
VZH08-1L
1200VA
277V AC 60Hz
8A 120V AC 60Hz
VZH06-7L
6A 277V AC 60Hz
X, Z
VZF01-1L
VZS15-1L
VZKIT-MD
1.5A 120V AC 60Hz
15A 120V AC 60Hz
—
VZKIT-CD
—
VZKIT-MS
—
VZKIT-CS
—
X, Z
X, Z
I, W, A, T,
G, E, R, B
I, W, A, T,
G, E, R, B
I, W, A, T,
G, E, R, B
I, W, A, T,
G, E, R, B
X, Z
Use Leviton Power Extenders to extend
the load capacity of box-mounted dimmers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark 10® Powerline fluorescent dimming ballasts or equivalents,
and 0–10 VDC dimmable fluorescent
ballasts such as Advance Mark 7®
0-10V, OSRAM Sylvania Quicktronic
Helios or equivalent ballasts.
† Contractor Packs are available in White (-W), Almond (-A) or Light Almond (-T), packaged 10 pieces/box.
To order, add suffix –ML to catalog number followed by color designation. Ex.: VZI06-ML*
Eco-10 ® (Eco-Series) Tu-Wire® and Hi-Lume ® are trademarks of Lutron Electronics Co., Inc.
See Page C7 for more information on Leviton Power Extenders
Lighting Controls
DESCRIPTION
4.13 (104.9)
3.28 (83.3)
Vizia Digital Controls with LED Locator and Brightness Display
Single-Pole, 3-Way or more applications U R
2.71 (68.8)
All Vizia Preset Dimmers and Fan Speed Controls provide single-pole (one location) or 3-way
(multi-location) control when used with a Vizia remote unit.
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral to each phase. Consult Leviton Techline if problems persist.
Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructions included with each device.
CAUTION ON RETROFITS: When retrofitting Mark 10 ® Powerline dimming ballasts into fixtures that originally had Instant Start ballasts, the sockets MUST be
replaced with Rapid Start sockets to allow proper dimmer operation and prevent damage to the dimming ballast. Refer to the instructions provided with the ballast
and the Leviton dimmer.
SPECIFICATIONS AND FEATURES
• Streamlined Decora styling complements any
interior, adds a “family look” when ganged with
any Decora device
• Push pad always returns to neutral regardless of
load status
• Digital circuitry provides Soft-ON/Fade-OFF
lighting and prolonged lamp life or an option via
simple programming for classic ON/OFF
• Green LED locator light illuminates when lights
are OFF
• Air-gap switch completely disconnects power to
unit for bulb changing or removal from service
• Provides single pole (one-location) or multi-location full range dimming when used with Vizia
Dimmer Remotes (see P. C20 for Vizia Remotes)
• Vizia Six-Pack: Three color choices along with
single pole or 3-way control provide 6 different
options in each box, eliminating the need to stock
a large variety of devices
• Color Change Kits are available in a wide range of
colors, making it easy and economical to change
decorating schemes
• Power failure recovery assures retention of lighting levels during long-term power interruptions
• Built-in radio/TV interference filter
• Quiet 1.5Amp Fan Speed Controls are perfect for
libraries, study rooms and any areas where ceiling
fan noise could become distracting
• Fits in standard wallbox – units may be ganged
• LED display alongside push pad indicates
selected brightness /fan speed level
• Dim/Bright Bar allows user to set brightness level
when lights are ON or OFF
• Minimum brightness level can be easily programmed from 1 to 50% of full brightness
• Dim Lock level feature determines preset light
level regardless of last setting
• Selectable Fade Rate is easily programmable for
desired Fade ON/OFF
• Press and hold push pad to turn lights on to full
bright from any preset light level
• To use the Delayed OFF feature while lights are
ON (10 seconds to OFF), press and hold the
push pad
• Compatible with Decora PLUS screwless
wallplates and Decora wallplates
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #M/C 152105)
• Backed by a Limited Five-Year warranty
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
*COLOR
Vizia Controls come packaged with three colors.
Controls with suffix (-X) include White, Ivory and
Almond. Controls with suffix (-Z) include White,
Ivory and Light Almond. Color Change Kits
available in the following colors: Ivory (I), White
(-W), Almond (-A), Light Almond (-T), Gray (-G),
Black (-E), Red (-R) and Brown (-B).
C
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
19
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
VIZIA™ CONTROLS • 120 AND 277V AC 60Hz
Commercial Grade Controls
4.13 (104.9)
3.28 (83.3)
2.71 (68.8)
Vizia Remotes
1.75 (44.5)
2.71 (68.8)
1.40
(35.6)
4.13 (104.9)
3.28 (83.3)
Lighting Controls
VZ00R-10X
Vizia Remotes — No Load Rating
For Use with Vizia Dimmers, Switches and Fan Speed Controls
UR
DESCRIPTION
CAT. NO.
RATING
Vizia Matching Remote Unit to 120V Dimmers/Fan Speed
Control for 3-way or up to 5 locations, with LED Locator and
Brightness/Fan Speed Display; neutral required†
Vizia Matching Remote Unit to 277V Dimmers for 3-way or
up to 5 locations, with LED Locator and Brightness Display;
neutral required
Vizia Coordinating Remote Unit to 120V Dimmers/Fan Speed
Control for 3-way or up to 10 locations, no LED; neutral
required when used with a device that requires a neutral wire†
Vizia Matching Switch Remote Unit to 120V Dimmers/
Fan Speed Control and VZS15-1L Switch for 3-way or
up to 5 locations, with LED Locator; neutral required
Vizia Coordinating Switch Remote Unit to 120V Dimmers/
Fan Speed Control and VZS15-1L Switch for 3-way or up to
10 locations, no LED; neutral required when used with a
device that requires a neutral wire
Vizia Matching Dimmer/Fan Speed Remote Color Change Kit
with LED Locator and Brightness Display
Vizia Coordinating Dimmer/Fan Speed Remote
Color Change Kit, no LED
Vizia Matching Switch Remote Color Change Kit with
LED Locator
Vizia Coordinating Switch Remote Color Change Kit, no LED
VZ00R-1L
120V AC 60Hz
COLOR*
X=I+W+A
Z=I+W+T
X, Z, W
VZ00R-7L
277V AC 60Hz
X, Z
VZ00R-10
120V AC 60Hz
X, Z
VZ0SR-1L
120V AC 60Hz
X, Z
VZ0SR-10
120V AC 60Hz
X, Z
VZKIT-MD
—
VZKIT-CD
—
VZKIT-MS
—
VZKIT-CS
—
I, W, A, T,
G, E, R, B
I, W, A, T,
G, E, R, B
I, W, A, T,
G, E, R, B
I, W, A, T,
G, E, R, B
† Contractor Packs are available in White (-W), Almond (-A) or Light Almond (-T), packaged 10 pieces/box. To order, add
suffix –ML to catalog number followed by color designation. Ex.: VZ00R-ML*
1.75 (44.5)
1.40
(35.6)
VZ00R-1LX
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral to
each phase. Consult Leviton Techline if problems persist.
Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructions included
with each device.
SPECIFICATIONS AND FEATURES
Use Leviton Power Extenders to extend
the load capacity of box-mounted dimmers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark 10® Powerline fluorescent dimming ballasts or equivalents,
and 0–10 VDC dimmable fluorescent
ballasts such as Advance Mark 7®
0–10V, OSRAM Sylvania Quicktronic
Helios or equivalent ballasts.
• Can be used with all Vizia Dimmers, Switches and
Fan Speed controls
• Streamlined Decora styling complements any
interior, adds a “family look” when ganged with
any Decora device
• Push pad returns to neutral regardless of load status
• Green LED locator light illuminates when lights are
OFF (matching remotes only)
• Provides multi-location full range control when used
with Vizia Dimmers/Fan Speed Controls
• Three color options in each box eliminates the need
to stock a large variety of devices
• Color Change Kits are available in a wide range of
colors, making it easy and economical to change
decorating schemes
• Fits in standard wallbox – units may be ganged
• Matching Remotes have LEDs and
provide control from up to 5 different locations
(neutral wire required)
• Coordinating Remotes provide control from up to
10 different locations
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #M/C 152105)
• Backed by a Limited Five-Year Warranty
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
*COLOR
Vizia Remotes come packaged with three colors.
Controls with suffix (-X) include White, Ivory and
Almond. Controls with suffix (-Z) include White, Ivory
and Light Almond. Color Change Kits available in the
following colors: Ivory (I), White (-W), Almond (-A),
Light Almond (-T), Gray (-G), Black (-E), Red (-R)
and Brown (-B).
C
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
20
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
VIZIA RF™ CONTROLS • 600-1000W • 120V AC 60HZ
Residential Grade Home Control System
Vizia RF Scene Capable Dimmers
CAT. NO.
RATING
Vizia RF Incandescent Scene Capable Dimmer
with LED Locator and Brightness Display
Vizia RF Incandescent Scene Capable Dimmer
with LED Locator and Brightness Display
Vizia RF Magnetic Low-Voltage Scene Capable
Dimmer with LED Locator and Brightness Display
Vizia RF ON/OFF Scene Capable Switch
with LED Locator
RZI06-1L
600W
COLOR*
X=I+W+A
X
RZI10-1L
1000W
X
RZM10-1L
1000VA
X
RZS15-1L
15A
X
4.13 (104.9)
3.28 (83.3)
DESCRIPTION
1800W Resistive
1800W Incandescent
1800VA Fluorescent
1800VA Inductive
1/2 HP Motor (9.8A)
Vizia RF Matching Dimmer Color Change Kit
VZKIT-MD
Vizia RF Matching Switch Color Change Kit with
LED Locator and Brightness Display
VZKIT-MS
2.71 (68.8)
All Vizia RF dimmers provide single-pole (one-location) and 3-way (multi-location) control when used with
a Vizia coordinating (no LED) remote unit.
1.75 (44.5)
I, W, A, T,
G, E, R, B
I, W, A, T,
G, E, R, B
1.40
(35.6)
RZI06-1LX
See Page C20 for Vizia Non-RF remotes. See Page C22 for Vizia RF remotes.
RATING
300W
COLOR*
White
RZP15-1L
15A
White
1800W Resistive
1800W Incandescent
1800VA Fluorescent
1800VA Inductive
1/2 HP motor loads
@ 120V AC, 60Hz
Vizia RF Plug-In Serial Interface Module
ASCII to Z-Wave Interface
RZC0P-1L
—
4.13 (104.9)
3.28 (83.3)
CAT. NO.
RZP03-1L
White
1.75 (44.5)
1.37
(34.8)
RZM10-1LX
SPECIFICATIONS AND FEATURES
Vizia RF Scene Capable Dimmers
• Scene capable, wireless control via RF
(Z-Wave® technology)
• Digital circuitry provides soft ON/fade OFF light
switching and smooth full-range changes in
brightness level for extended bulb life
• Push pad always returns to neutral position
regardless of load status
• Compatible with Decora Plus screwless wallplates
and Decora wallplates
• Complements Vizia Lighting Controls (see page
C19 for more information)
• Color change kits are available to allow fast color
changeover and simplify stocking inventory
• Vizia Six-Pack: Three color choices along with
single pole or 3-way control provide 6 different
options in each box, eliminating the need to stock
a large variety of devices
• Easy adjustments for minimum brightness level,
Dim-Lock and selectable fade rates
• Lights turn ON at the last selected brightness level
or at user-programmable Dim-Lock setting
• Manual and remote ON/OFF/DIM/BRIGHT
control of connected Dimmer
• ON/OFF/DIM/BRIGHT scene and zone control
capability
• Responds to Vizia RF Controllers as well as
selected Z-Wave certified controllers from other
manufacturers
• Works with the Vizia RF 1-Zone Controller/
Matching Dimmer Remote (RZCZ1-1L) for
RF virtual 3-way control without the need for
traditional 3-way wiring or for a dedicated
traveler wire
• Works with Vizia™ (non-RF) Coordinating
Remotes (VZ00R-10) for hardwired 3-way or up
to 10-location control
• Enhanced 2-way communication
• Easy to clean, high gloss finish complements a
wide range of décors
• DIM/BRIGHT bar allows user to select brightness
level when lights are ON or OFF— green LED
displays brightness level
• Power-failure memory allows light levels to return
to the same levels set prior to power interruption
• RFI filtering for radio, audio and video equipment
• UL required air gap switch disconnects power
from load locally. It is concealed during normal
operation and is accessible without removing
the wallplate
Vizia RF Scene Capable Plug-in Appliance Module
(RZP15)
• Provides 15A-120VAC NEMA 5-15R grounding
receptacle for use with a wide variety of lamps
and appliances
• Provides Manual ON/OFF switching of plug-in
load and remote scene and zone control
compatibility
• Enhanced 2-way communication
Vizia RF Scene Capable Plug-in Lamp Dimming
Module (RZP03)
• Provides NEMA polarized 1-15R 2-blade
receptacle for use with incandescent lamps
• Load Sensing feature allows lamp to be turned
ON manually using the lamp’s switch or the
integrated ON/OFF button
• Provides manual and remote ON/OFF/DIM/
BRIGHT control of plug-in lamps
• Enhanced 2-way communication
• Provides ON/OFF/DIM/BRIGHT scene and zone
control capability
TESTING AND CODE COMPLIANCE
•
•
•
•
•
•
UL Listed (File #E-66800)
CSA Certified (File #152105)
NOM Certified (#057)
Complies with FCC Part 15, Class B
Z-Wave Certified
Backed by a Limited Five-Year Warranty
Lighting Controls
DESCRIPTION
Vizia RF Scene Capable Plug-In
Lamp Dimming Module
Vizia RF Scene Capable Plug-In Appliance Module
2.71 (68.8)
Vizia RF Plug-In Modules
*COLOR
Vizia-RF Lighting Controls come packaged with
three colors. Controls with suffix (-X) include White,
Ivory and Almond. Color Change Kits available in
the following colors: Ivory (-I), White (-W), Almond
(-A), Light Almond (-T), Gray (-G), Black (-E), Red
(-R) and Brown (-B).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
C
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
21
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
VIZIA RF™ HOME CONTROLS • 120V AC 60HZ
Residential Grade Controls
4.13 (104.9)
3.28 (83.3)
2.71 (68.8)
Vizia RF™ Remotes for Use with
Vizia RF Scene-Capable Dimmers and Switches
Vizia RF™ Remotes U R
1.75 (44.5)
1.75 (44.5)
RZCS4-1LX
RZCPG-0SG
C
1.40
(35.6)
CAT. NO.
RATING
Vizia RF 1-Button Zone Dimming Controller
RZCZ1-1L
Vizia RF 4-Button Zone Controller
RZCZ4-1L
Vizia RF 1-Button Scene Controller
RZCS1-1L
Vizia RF 4-Button Scene Controller
RZCS4-1L
VZKIT-S4
No load rating –
120V AC 60Hz
No load rating –
120V AC 60Hz
No load rating –
120V AC 60Hz
No load rating –
120V AC 60Hz
2 AA batteries
(Included)
2 AA batteries
(Included)
2 AA batteries
(Included)
—
VZKIT-Z4
—
I, W, A
VZKIT-MD
—
I, W, A
VZKIT-MS
—
I, W, A
VZ00R-10
No load rating –
120V AC 60Hz
X, Z
Vizia RF Handheld Remote Controller
RZCPG-0SG
Programmer/Timer (Internal Astronomical Clock)
Vizia RF Handheld Remote Controller
RZCPG-BSG
Programmer (Basic)
Vizia RF IR Handheld Remote Controller
RZMR1-0SG
2.71 (68.8)
4.13 (104.9)
3.28 (83.3)
Lighting Controls
RZCS1-1LX
1.40
(35.6)
DESCRIPTION
4-Button Scene Controller Color Change Kit
with LED Locator
4-Button Zone Controller Color Change Kit
with LED Locator
Matching Dimmer Color Change Kit with
LED Locator and Brightness Display for RZCZ1
Matching Switch Color Change Kit with
LED Locator for RZCS1
Coordinating Dimmer Remote for up to
10 location applications; neutral required
SPECIFICATIONS AND FEATURES
Vizia RF Controllers
• Compatible with Decora Plus screwless wallplates
and Decora wallplates
• Enhanced 2-way communication
• Popular Vizia-style push pad on 1-button controllers
blend seamlessly with other devices in the Vizia
collection
Vizia RF 1-Button Scene Controller (RZCS1-1L)
• Provides remote ON/OFF control of one scene
• Virtual 3-way and multi-location remote ON/OFF
control of selected Vizia RF switches without the
need for traditional 3-way wiring or a dedicated
traveler wire
• Controller fits in standard wall box and utilizes
household 120VAC 60Hz wiring (when neutral wire
is present) for easy “no-new-wires” installation
• Green LED illuminates to indicate controlled scene.
When acting as a matching remote, LED will illuminate when the load is OFF
Vizia RF 1-Button Zone Dimming Controller (RZCZ1-1L)
• Provides remote ON/OFF/DIM/BRIGHT control of
one Vizia RF Dimmer
• Virtual 3-way remote dimming control of selected
Vizia RF dimmers without the need for traditional
3-way wiring or a dedicated traveler wire
• Controller fits in standard wall box and utilizes
existing 120VAC 60Hz wiring to replace a regular
switch (when neutral wire is present) for easy
“no-new-wires” installation
• Green LED locator illuminates to indicate controlled
zone or load is OFF
Vizia RF 4-Button Scene (RZCS4-1L) or Zone
(RZCZ4-1L) Controllers
• Provides remote ON/OFF/DIM/BRIGHT control of
four scenes (RZCS4-1L) or zones/areas (RZCZ4-1L)
of selected Vizia RF devices
• Integrated infrared (IR) port
• Controller fits in standard wall box and utilizes
existing 120VAC 60Hz wiring to replace a regular
switch (when neutral wire is present) for easy
“no-new-wires” installation
• Green LED illuminates when the assigned scene
(RZCS4-1L) or zone/area (RZCZ4-1L) is ACTIVE
COLOR*
X=I+W+A
Z=I+W+T
X
X
X
X
Silver
Silver
Silver
I, W, A
Vizia RF Handheld Remotes
RZCPG
• Primary device for creating and programming a Vizia
RF system
• Provides user level control of up to 128 devices
• Can operate as a secondary remote control
• Provides remote control (ON/OFF/DIM/BRIGHT/
SCENE/ZONE) of all devices in the Vizia RF network
RZMR1
• Works with Vizia RF IR compatible controllers
• Controls four scenes and four zones
TESTING AND CODE COMPLIANCE
• UL Listed (File #-E-66800)
• CSA Certified (File #152105)
• NOM Certified (#057)
• Complies with FCC Part 15, Class B
• Z-Wave Certified
• Backed by a Limited Five-Year Warranty
Handheld Remotes
• Complies with FCC Part 15, Class B
• Z-Wave Certified
*COLOR
Vizia-RF Home Controls come packaged with three
colors. Controls with suffix (-X) include White, Ivory
and Almond. Controls with suffix (-Z) include White,
Ivory and Light Almond. Color Change Kits available in
the following colors: Ivory (I), White (-W), Almond (-A).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 131°F
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
22
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
MURAL® LIGHTING CONTROLS • 600–1000 WATTS • 120V AC 60Hz
Commercial Grade Controls
Mural Digital Controls
All Mural controls provide single-pole (one location) or 3-way (multi-location) control when
used with Multi-Remote unit.
RATING
600W
MDI10-1L
1000W
MDM06-1L
600VA (450W)
MDM10-1L
1000VA (800W)
MDE03-1L
350VA (280W)
MDF01-1L
1.5A
MS00R-10
No load rating
MSE0R-10
No load rating
COLOR*
I, W, A
(G, E, B with Kit)
I, W, A
(G, E, B with Kit)
I, W, A
(G, E, B with Kit)
I, W, A
(G, E, B with Kit)
W
(I, A, G, E, B with Kit)
I, W, A
(G, E, B with Kit)
I, W, A
(G, E with Kit)
2.67 (67.8)
CAT. NO.
MDI06-1L
3.28 (83.3)
DESCRIPTION
Mural Incandescent Dimmer with LED Locator
and Brightness Display
Mural Incandescent Dimmer with LED Locator
and Brightness Display
Mural Magnetic Low-Voltage Dimmer with
LED Locator and Brightness Display
Mural Magnetic Low-Voltage Dimmer with
LED Locator and Brightness Display
Mural Electronic Low-Voltage Dimmer with
LED Locator and Brightness Display
Mural Quiet Fan Speed Control with LED Locator
and Brightness Display; neutral required
Coordinating Remote Unit to Dimmers/
Fan Speed Controls for 3-way or up to
10 locations, no LED
Coordinating Remote Unit to Electronic
Low-Voltage Dimmer for 3-way or up to
10 locations, no LED; neutral required
4.13 (104.9)
Mural Digital Controls 120V AC 60Hz Only U R
2.38 (60.5)
1.32
(33.6)
MDI06-1LW
W
(I, A, G, E with Kit)
Color Change Kits for Mural Controls
CAT. NO.
DRKDD-1L
COLOR*
I, W, A, G, E, B
DRK0R-00
I, W, A, G, E, B
Lighting Controls
DESCRIPTION
Mural Dimmer Color Change Kit
with LED Locator and Brightness Display
Remote Color Change Kit,
no LED Locator or Display
Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructions included
with each device.
See Page C7 for more information on Leviton Power Extenders
SPECIFICATIONS AND FEATURES
• Provides single-pole (one-location) or multi-location full
range dimming when used with MS00R remote unit
• Streamlined popular Decora styling enhances any
interior and adds a family look when ganged with other
Decora devices
• Smooth ON/OFF and DIM/BRIGHT Decora rocker
action provides ease of operation for people of all ages
and abilities
• Digital circuitry provides Soft-ON/Fade-OFF switching
for an eye-pleasing effect and extended lamp life
• Compatible with DecoraPLUS screwless and Decora
wallplates
• Locator LED illuminated when lights are OFF
• Color change kits available in a wide range of choices,
making it easy and economical to change decorating
schemes
• Color change kits simplify inventory for distributors and
contractors who can offer a complete range of colors
without stocking a different device for each one
• Protected memory and voltage compensation maintain
light levels after short-term power outages and during
minor power fluctuations
• Coordinates with Leviton’s DHC line of products
• Green LED display alongside rocker indicates selected
brightness level on MD models
• Built-in radio/TV interference filter
• Air gap switch completely disconnects power to unit for
bulb changing or removal from service
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Five-Year Warranty
*COLOR
To order colors, add suffix to basic catalog number.
Colors in parentheses must be ordered as Color
Change Kits. Color suffixes are: Ivory (-I), White (-W),
Almond (-A), Gray (-G), Black (-E) and Brown (-B).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
Use Leviton Power Extenders to extend
the load capacity of box-mounted dimmers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark 10 ® Powerline fluorescent dimming ballasts or equivalents,
and 0–10 VDC dimmable fluorescent
ballasts such as Advance Mark 7®
0–10V, OSRAM Sylvania Quicktronic
Helios or equivalent ballasts.
C
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
23
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
MURAL® LIGHTING CONTROLS • 600–1000 WATTS • 120V AC 60Hz
Commercial Grade Lighting Controls
Mural Scene Capable Digital Dimmers
Compatible with Scene Controller and Scene Enhancement Products — See page C25.
2.67 (67.8)
3.28 (83.3)
4.13 (104.9)
Mural Scene Capable Digital Dimmer 120V AC 60Hz Only U R
2.38 (60.5)
1.32
(33.6)
MCM06-1LW
DESCRIPTION
Mural Scene Capable Incandescent/
Magnetic Low-Voltage Dimmer with
LED Locator and Brightness Display
Mural Scene Capable Incandescent/
Magnetic Low-Voltage Dimmer with
LED Locator and Brightness Display
Mural Scene Capable Preset Fluorescent
Dimmer for Mark 10® Powerline Ballast
with LED Locator and Brightness Display;
neutral required
Color Change Kits for Mural MC
Scene Capable Dimmer
CAT. NO.
MCM06-1L
COLOR*
I, W, A
(G, E, B with Kit)
MCX10-1L
RATING
600W Incandescent
600VA Magnetic
Low Voltage
1000W Incandescent
1000VA Magnetic
Low Voltage
1000VA
DRKDD-1L
—
I, W, A, G, E. B
MCM10-1L
I, W, A
(G, E, B with Kit)
W
(I, A, G, E, B with Kit)
See Page C7 for more information on Leviton Power Extenders
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral
to each phase. Consult Leviton Techline if problems persist.
Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructions included
with each device.
Lighting Controls
CAUTION ON RETROFITS: When retrofitting Mark 10 ® Powerline dimming ballasts into fixtures that originally had Instant
Start ballasts, the sockets MUST be replaced with Rapid Start sockets to allow proper dimmer operation and prevent
damage to the dimming ballast. Refer to the instructions provided with the ballast and the Leviton dimmer.
SPECIFICATIONS AND FEATURES
Use Leviton Power Extenders to extend
the load capacity of box-mounted
dimmers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark 10 ® Powerline fluorescent dimming ballasts or equivalents,
and 0–10 VDC dimmable fluorescent
ballasts such as Advance Mark 7®
0–10V, OSRAM Sylvania Quicktronic
Helios or equivalent ballasts.
• Responds to lighting level commands sent by the
Cat. No. MN00C-1L Scene Controller (See Page
C25). Users can program the desired lighting level
for individual Mural Scene Dimmers in up to seven
distinct lighting scenes, which are easily accessed
by one or more Scene Controllers
• Smooth ON/OFF and DIM/BRIGHT Decora rocker
action provides ease of operation for people of all ages
and abilities
• Local DIM/BRIGHT adjustment on individual scene
dimmers will not affect programmed scene lighting
settings
• Compatible with Scene Enhancement Products
including Contact Closure Interface, Infrared HandHeld Remote and Infrared Receiver, and one-way
and two-way Signal Repeater
• Streamlined, popular Decora styling enhances any
interior and adds a “family look” when ganged with
any Decora device
• Digital circuitry provides Soft-ON/Fade-OFF operation
for an eye-pleasing effect and prolonged lamp life
• Green LED display alongside rocker indicates selected
brightness level
• Locator LED illuminates when lights are OFF
• Color change kits available in a wide range of choices,
making it easy and economical to change decorating
schemes
• Color change kits simplify inventory for distributors and
contractors who can offer a complete range of colors
without stocking a different device for each one
• Minimum Brightness Adjustment sets comfortable
minimum light level
• Protected memory and voltage compensation maintain
light levels after power outages and during minor power
fluctuations
• Built-in radio/TV interference filter
• Air-gap switch completely disconnects power to unit for
bulb changing or removal from service
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Five-Year warranty
*COLOR
To order colors, add suffix to basic catalog number.
Colors in parentheses must be ordered as Color
Change Kits. Color suffixes are: Ivory (-I), White (-W),
Almond (-A), Gray (-G), Black (-E) and Brown (-B).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
C
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
24
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
MURAL® SCENE CONTROLS • NO LOAD RATING
Commercial Grade Lighting Controls
Mural Scene Controller and Accessories
DCKS7-00
RATING
No load rating,
use with 120V
Mural Scene
Dimmers only
—
COLOR*
White, for
other colors
use Color
Change Kits
I, W, A, G, E
Color Change Kits with Text for Mural
MN00C-1L Scene Controller
Color Change Kit with Customizable Labels
for Mural Scene Controller
DCKS7-0C
—
I, W, A, G, E
2.69 (68.2)
CAT. NO.
MN00C-1L
3.28 (83.3)
DESCRIPTION
Mural Scene Controller:
7 Lighting-Scene Buttons plus
OFF and Group DIM/BRIGHT Buttons
4.71 (119.7)
Scene Controller for Mural Scene Capable Lighting Controls U R
Scene Enhancement Products—
Compatible with Mural Scene Capable Lighting Controls U R
DESCRIPTION
Signal Repeater—Must be used if
controlling lighting on more
than one circuit. One-Way and
Two-Way versions available
Contact Closure Interface—Allows control
of Mural Scene Capable devices from
home theater and building control systems
via momentary contact inputs
Infrared Receiver available with
Wall Mount and Ceiling Fan Bezels
CAT. NO.
17100-1WY,
17100-2WY
Hand-Held Infrared Remote Control:
with 4 Scene Buttons plus OFF
RATING
No load rating
120V AC
COLOR*
—
1.75 (44.5)
MN00C-1LW
No load rating
120V AC
(Non-color item)
177IR-IWA
No load rating
120V AC
177RC
No load rating
120V AC
Supplied with
Ivory, White and
Almond bezels
E
Scene Controller
• Sends commands for up to seven distinct scenes to
individual Mural Scene Capable Dimmers
• Multiple Scene Controllers can be used for multipoint access to scenes.
• Provides OFF button and two arrow-shaped buttons
for group Dim and Bright control
• Local DIM/BRIGHT adjustment on individual scene
dimmers will not affect programmed scene settings
• Green LED display for each scene button indicates
selected scene
• Fast, easy scene programming: Press scene button
on MN00C, adjust individual level on Mural Scene
Capable dimmer, press program button on dimmer
• Controls up to 20 scene dimmers per circuit
• Streamlined, popular Decora styling enhances any
interior and adds a “family look” when ganged with
any Decora device
• Use Decora Plus or any standard Decora wallplate
• Color change kits are available in a wide range of
colors making it easy and economical to change
decorating schemes
• Internal MOV for surge protection
Lighting Controls
177BI
Note: A Repeater must be used on any installation that uses more than one circuit.
SPECIFICATIONS AND FEATURES
1.30
(33.1)
• Customized lettering for each scene button available (maximum of 8 characters and spaces) — see
your Leviton representative for ordering information
Scene Enhancement Products
• Two-Way Repeater provides scene control communication link between branch circuits. One-Way
Repeater allows the creation of separate scene
control zones
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373 – Cat. Nos. MN00C and
177IR; File #E-66800 – Cat. Nos. 17100-1WY and
17100-2WY; File #E-600800 – Cat. No. 177BI )
• CSA Certified (File #LR-3413)
• Backed by a Limited Five-Year Warranty
*COLOR
Basic Cat. No. denotes White device. For other
colors, order Color Change Kits and add suffix as
follows: Ivory (-I), White (-W), Almond (-A), Gray (-G)
and Black (-E) .
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
C
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
25
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TOUCH LIGHTING CONTROL FEATURES
Commercial Grade Lighting Controls
Touch Lighting Controls
The Leviton Touch series includes two full-range dimming lines that use digital touch pad technology to
enable dimming and switching with a touch of a finger: True Touch™ and ToggleTouch™.
Microcontroller with onboard
non-volatile memory
Touch pad for
brightening
Lighting Controls
Locator LED for easy
location in dark
Touch pad
for dimming
Built-in radio/TV
interference filter
Highly
reliable triac
Copper heat
spreader
ToggleTouch™ TGI10-1LW
Smooth-action
toggle arm
Features and Benefits
I
I
I
I
Preset dimmers incorporate touchpad technology
Digital circuitry provides eye-pleasing Soft-ON/
Fade-OFF that extends lamp life (most models)
I Single- and multi-location control available
Wide range of colors coordinates with any décor
UL and CSA Listed
I Backed by a Limited Five-Year Warranty
LEVITON TOUCH DIMMERS FOR FULL-RANGE DIMMING
True Touch™ Dimmer
Decora-style digital touch
dimmer. Provides fingertip
full-range single-pole and
multi-location dimming.
Color change kits available.
TTI10-1LX shown
ToggleTouch™ Dimmer
Unique design features
toggle-style ON/OFF
switch with bright and
dim digital touch pads
alongside toggle and LED
locator light.
TGI10-1LW shown
C
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
26
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TRUE TOUCH™ LIGHTING CONTROLS • 600–1000 WATTS • 120V AC 60Hz
Commercial Grade Lighting Controls
True Touch Digital Dimmers
CAT. NO.
RATING
True Touch Incandescent Dimmer
with LED Locator
TTI06-1L
600W
COLOR*
X=I+W+A
Z=I+W+T
X, Z, GS
True Touch Incandescent Dimmer
with LED Locator
TTI10-1L
1000W
X, Z, GS
True Touch Magnetic Low-Voltage Dimmer
with LED Locator
TTM10-1L
1000VA (800W)
X, Z, GS
Coordinating Remote Unit to True Touch Dimmers
for 3-way or up to 10 locations, no LED
TT00R-1
No load rating
X, Z, GS
True Touch Dimmer Color Change Kit
TTKIT
—
I, W, A, T, GY, E, WS,
GI, BG
True Touch Remote Dimmer Color Change Kit
TTKTR
—
I, W, A, T, GY, E, WS,
GI, BG
2.67 (67.8)
UR
DESCRIPTION
3.28 (83.3)
True Touch Digital Dimmer 120V AC 60Hz
4.13 (104.9)
All True Touch dimmers provide single-pole (one location) or 3-way (multi-location) control when
used with TrueTouch Remote.
2.38 (60.5)
1.38
(35.1)
TTI10-1LX
See Page C7 for more information on Leviton Power Extenders
Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructions included
with each device. They can be used in conventional 3-way and 4-way wiring circuits only when the Control is properly
connected to the load as indicated by the device’s wiring instructions.
Lighting Controls
SPECIFICATIONS AND FEATURES
• Provides fingertip ease of use and precise
adjustment of lighting levels. Simple one-touch
for ON at preset level, or again for OFF. Touch
and hold for BRIGHT/DIM lighting control
• Provides single-pole (one-location) and multilocation full range dimming when used with TT00R
remote dimmer
• Attractive Decora styling blends with any interior
• Digital circuitry provides Soft-ON/Fade-OFF
switching for an eye-pleasing effect and extended
lamp life
• Compatible with DecoraPLUS screwless and
Decora wallplates
• Locator LED is illuminated when lights are OFF
(no LED on Remote Unit)
• Color change kits offered in a wide range of colors,
making it easy and economical to change decorating
schemes
• Protected memory maintains light levels after
short-term power outages and during minor power
fluctuations
• Built-in radio/TV interference filter
• Air gap switch completely disconnects power to unit
for bulb changing or removal from service
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373
• CSA Certified (File #LR-3413)
• Backed by a Limited Five-Year Warranty
*COLOR
TTI06, TTI10 and TTM10 products come packaged
with three colors. Products with suffix (-X) include
White, Ivory and Almond; products with suffix (-Z)
include White, Ivory and Light Almond; products with
suffix (-GS) include White, Gold and Silver. Color
change kits available in the following colors: White
(-W), Ivory (-I), Almond (-A), Light Almond (-T), Gray
(-G), Black (-E), White Frame/Silver Touch (-WS),
Ivory Frame/Gold Touch (-GI) and Brown Frame/
Gold Touch (-BG).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
Use Leviton Power Extenders to extend
the load capacity of box-mounted dimmers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark 10 ® Powerline fluorescent dimming ballasts or equivalents,
and 0–10 VDC dimmable fluorescent
ballasts such as Advance Mark 7®
0–10V, OSRAM Sylvania Quicktronic
Helios or equivalent ballasts.
C
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
27
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TOGGLETOUCH™ LIGHTING CONTROLS • 600–1000 WATTS • 120V AC 60Hz
Commercial Grade Lighting Controls
ToggleTouch Digital Dimmers
All ToggleTouch Preset Dimmers provide single-pole (one-location) or 3-way (multi-location) control when
used with a 3-way switch, except where noted.
2.70 (68.6)
3.28 (83.3)
4.13 (104.9)
ToggleTouch Digital Touch Dimmer with LED Locator 120V AC 60Hz U R
DESCRIPTION
ToggleTouch Incandescent Dimmer
ToggleTouch Incandescent Dimmer
ToggleTouch Magnetic Low-Voltage Dimmer
CAT. NO.
TGI06-1L
TGI10-1L
TGM10-1L
RATING
600W
1000W
1000VA (800W)
COLOR*
W, I, A, T, B
W, I, A, T, G
W, I, A, T, G
Note: Leviton does not recommend using the ToggleTouch Dimmer with metal wallplates.
See Page C7 for more information on Leviton Power Extenders
1.75 (44.5)
1.44
(36.6)
Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructions included
with each device. They can be used in conventional 3-way and 4-way wiring circuits only when the Control is properly
connected to the load as indicated by the device’s wiring instructions.
Lighting Controls
TGI06-1LW
SPECIFICATIONS AND FEATURES
Use Leviton Power Extenders to extend
the load capacity of box-mounted
dimmers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark 10 ® Powerline fluorescent dimming ballasts or equivalents,
and 0–10 VDC dimmable fluorescent
ballasts such as Advance Mark 7®
0–10V, OSRAM Sylvania Quicktronic
Helios or equivalent ballasts.
• Provides a unique combination of toggle-style
ON/OFF switching and digital touch pad technology
• Designed for smooth ON/OFF toggle action and
fingertip touch dimming control that’s easy to
operate
• Provides single-pole (one-location) and 3-way
(multi-location) control when used with a
3-way switch
• Touch pads match color of toggle switch
• Fits and gangs perfectly with Leviton standard
toggle wallplates and all Leviton toggle switches
• Provides preset dimming with Soft-ON feature
(does not provide Fade-OFF)
• Locator LED is illuminated when lights are OFF
• Protected memory during temporary power failures
ensures that ToggleTouch will retain last setting
before power interruption
• Built-in radio/TV interference filter
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Five-Year Warranty
*COLOR
To order colors, add suffix to catalog number as
follows: Ivory (-I), White (-W), Almond (-A), Light
Almond (-T), Gray (-G) and Brown (-B).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
C
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
28
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TRADITIONAL CONTROL FEATURES
Commercial and Residential Grade Controls
Traditional Controls
Leviton offers a full line of slide, rotary and toggle dimmers and fan speed controls ideally suited to
traditional interiors. The line includes IllumaTech™, SureSlide™, and Trimatron® brand devices as well
as a number of specialty lighting devices. Leviton traditional controls are offered in a variety of colors.
Smooth-action slide
potentiometer
Built-in radio/TV
interference filter
Captured
slide knob
remains
on device
Highly
reliable triac
IPI10-1LZ
Locator LED
illuminates for
easy location
in dark
Features and Benefits
I
I
I
I
Features slide, rotary and toggle style dimmers
Most with full-range dimming and built-in radio/TV
interference filter
I Single- and multi-location control available
Lighting Controls
Single-pole and
3-way mechanism
UL and CSA Listed
Backed by a Limited Five-Year Warranty
TRADITIONAL STYLE SLIDE AND ROTARY LIGHTING CONTROLS
IllumaTech™ Slide and Rotary Dimmers
Decora-style dimmer with full-range slide or rotary
dimming for single- or multi-location dimming
control. Color change kits available.
IPI06-1LZ and RPI06-ILZ shown
SureSlide™ Slide Controls
Smooth-action slide control
for easy, precise operation.
Slim design ideal for multigang installations. Preset
and slide-to-off versions.
6633-PLW shown
Trimatron® Rotary Controls
Ultra-compact, full-range
rotary dimmers.
6681-W shown
Specialty Lighting Controls
Specialty dimmers, sockets
and switches. Emergency
switch flashes lights on and
off. Lamp-cord and 4-step
dimmers also available.
911-W shown
C
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
29
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
ILLUMATECH™ CONTROLS • 600–1000 WATTS • 120 and 277V AC 60Hz
Commercial Grade Controls
IllumaTech Preset Slide Controls
2.68 (68.1)
3.28 (83.3)
4.15 (105.4)
All IllumaTech Preset Dimmers provide single-pole (one-location) or 3-way (multi-location) control when
used with a 3-way switch.
1.75 (44.5)
1.41
(35.8)
2.12 (53.8)
Lighting Controls
IPI10-1LZ
IllumaTech Slide Contols—Single Pole and 3-Way U R
DESCRIPTION
CAT. NO.
RATING
IllumaTech Incandescent Dimmer
with LED Locator
IllumaTech Incandescent Dimmer
with LED Locator
IllumaTech Electronic Low-Voltage Dimmer
with LED Locator; neutral required
IllumaTech Magnetic Low-Voltage Dimmer
with LED Locator
IllumaTech Magnetic Low-Voltage Dimmer
with LED Locator
IllumaTech Fluorescent Dimmer for Advance Mark 7®
0-10V Ballast with LED Locator; neutral required
IPI06-1L
IllumaTech Fluorescent Dimmer for Advance Mark 10®
Powerline Ballasts, no LED; neutral required
IllumaTech Fluorescent Dimmer for Advance Mark 10®
Powerline Ballasts, no LED; neutral required
IllumaTech Fluorescent Dimmer for Advance Mark 10®
Powerline Ballasts, no LED; neutral required
IllumaTech Fluorescent Dimmer for Advance Mark 10®
Powerline Ballasts, no LED; neutral required
IllumaTech Quiet Fan Speed Control
with LED Locator; neutral required
IllumaTech Fully variable Fan Speed Control
with LED Locator; neutral required
IllumaTech Color Change Kit
with LED Locator
IllumaTech Color Change Kit, no LED
IPX06-10
IPKIT-00
600W
120V AC 60Hz
1000W
120V AC 60Hz
400VA (320W)
120V AC 60Hz
600VA (450W)
120V AC 60Hz
1000VA (800W)
120V AC 60Hz
1200VA @
120V AC 60Hz,
1500VA @
277V AC 60Hz
600VA
120V AC 60Hz
1000VA
120V AC 60Hz
600VA
277V AC 60Hz
1200VA
277V AC 60Hz
1.5 Amps
120V AC 60Hz
5 Amps
120V AC 60Hz
—
IPKIT-0N
—
IllumaTech Color Change Kit
for Fan Speed Control
IPQFK-00
—
IPI10-1L
IPE04-1L
IPM06-1L
IPM10-1L
IP710-DL
IPX10-10
IPX06-70
IPX12-70
IPF01-1L
IPF05-1L
COLOR*
X=I+W+A
Z=I+W+T
X, Z
X, Z
X, Z
X, Z
X, Z
X, Z
X, Z
X, Z
X, Z
X, Z
X, Z
X, Z
I, W, A, T,
G, E, R, B
I, W, A, T
G, E, R, B
I, W, A, T,
G, E, R, B
See Page C7 for more information on Leviton Power Extenders
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral to
each phase. Consult Leviton Techline if problems persist.
CAUTION ON RETROFITS: When retrofitting Mark 10® Powerline dimming ballasts into fixtures that originally had Instant
Start ballasts, the sockets MUST be replaced with Rapid Start sockets to allow proper dimmer operation and prevent damage to the dimming ballast. Refer to the instructions provided with the ballast and the Leviton dimmer.
SPECIFICATIONS AND FEATURES
Use Leviton Power Extenders to extend
the load capacity of box-mounted dimmers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark 10 ® Powerline fluorescent dimming ballasts or equivalents,
and 0–10 VDC dimmable fluorescent
ballasts such as Advance Mark 7®
0–10V, OSRAM Sylvania Quicktronic
Helios or equivalent ballasts.
C
• Fluid slide movement allows fine adjustment of light
level with minimum effort
• Captured, wrap-around slide bar stays in place and
cannot fall off during use
• Easy-to-use pushbutton switch with conveniently
positioned locator LED. Makes the pushbutton
easier to find in the dark
• Provide single-pole (one-location) and multi-location
lighting control when used with a 3-way switch
• IllumaTech Six-Pack: Three color choices, along with
single- or multi-location control provide six different
options in each box, eliminating the need to stock a
large variety of devices
• Attractive Decora styling blends with any interior
• Compatible with Decora screwless and Decora
standard designer wallplates
• Power failure recovery ensures retention of last
setting before power interruption
• Built-in radio/TV interference filter
• Quiet 1.5 Amp Fan Speed Controls are ideal for
libraries, study rooms and any area where ceiling
fan noise could become distracting. Full range
5-amp fan speed controls also available
• Color change kits feature a self-aligning mechanism
that automatically connects it to internal slider
• Snap-On Color Change Kits allow color changes on
any device, eliminating the need to stock a separate
device for every available color
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Five-Year Warranty
*COLOR
IllumaTech Preset Controls come packaged with
three colors. Controls with suffix (-X) include Ivory,
White and Almond; controls with suffix (-Z) include
Ivory, White and Light Almond. Color Change Kits
available in the following colors: Ivory (-I), White (-W),
Almond (-A), Light Almond (-T), Gray (-G), Black (-E),
Brown (-B) and Red (-R).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
30
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
ILLUMATECH™ CONTROLS • 600 WATTS • 120V AC 60Hz
Residential Grade Controls
IllumaTech Rotary Controls
All IllumaTech Rotary Controls combine the ease of a traditional rotary dial with the contemporary look of
Leviton Decora®.
RATING
IllumaTech Rotary Incandescent Dimmer,
Single-Pole or 3-way, with LED Locator
IllumaTech Rotary Incandescent Dimmer,
Single-Pole or 3-way, no LED
IllumaTech Rotary Quiet Fan Speed Control,
Single-Pole, no LED
IllumaTech Rotary Quiet Fan Speed Control
and Dimmer, Single-Pole, no LED
RPI06-1L
600W
COLOR*
X=I+W+A
Z=I+W+T
X, Z
RPI06-10
600W
X, Z
RTF01-1L
1.5A
X, Z
RTD01-10
1.5A
Fan Control/
300W Dimmer
X, Z
2.23 (56.6)
CAT. NO.
3.28 (83.3)
DESCRIPTION
4.12 (104.6)
IllumaTech Rotary Controls 120V AC 60Hz U R
1.73 (44.0)
1.30
(33.1)
4.12 (104.6)
3.28 (83.30)
1.73
(44.0)
1.30
(33.1)
RTD01-10X
SPECIFICATIONS AND FEATURES
• Combines traditional rotary dial with contemporary
Decora styling
• Dimmers provide single-pole (one-location) and
3-way (multi-location) control when used with a
3-way switch
• IllumaTech Six-Pack: Three color choices, along
with single- or 3-way control provide six different
options in each box, eliminating the need to stock
a large variety of devices
• Dimmers available in illuminated and nonilluminated versions
• Quiet 1.5 Amp Fan Speed Controls are perfect for
libraries, study rooms and any area where ceiling
fan noise could become distracting
• Dual fan speed control and dimmer is ideal for
ceiling fans with built-in light fixtures
• Attractive Decora styling coordinates perfectly with
Leviton’s complete line of Decora wiring devices
• Compatible with Decora Plus screwless and Decora
standard designer wallplates
• Built-in radio/TV interference filter
• Slim, compact housing fits easily into a standard
wallbox and is suitable for multi-gang installations
Lighting Controls
2.67 (67.8)
RPI06-1LX
See Page C7 for more information on Leviton Power Extenders
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Five-Year Warranty
*COLOR
IllumaTech Rotary Controls come packaged with
three colors. Controls with suffix (-X) include White,
Ivory and Almond; controls with suffix (-Z) include
Ivory, White and Light Almond.
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
Use Leviton Power Extenders to extend
the load capacity of box-mounted dimmers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark 10 ® Powerline fluorescent dimming ballasts or equivalents,
and 0–10 VDC dimmable fluorescent
ballasts such as Advance Mark 7®
0–10V, OSRAM Sylvania Quicktronic
Helios or equivalent ballasts.
C
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
31
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
SURESLIDE™ CONTROLS • 600 WATTS • 120V AC 60Hz
Residential Grade Controls
2.70 (68.6)
3.28 (83.3)
4.13 (104.9)
SureSlide™ Full Range Slide Controls 120V AC 60Hz Only
Incandescent U R
DESCRIPTION
SureSlide Single-Pole Slide-To-Off Dimmer, with
optional use LED
SureSlide Single-Pole or 3-Way Dimmer
with Preset On/Off Switch, with optional use LED
SureSlide Incandescent or Magnetic Low-Voltage
Dual Slide-To-Off Dimmer—two Single-Pole Loads
CAT. NO.
6631-L
RATING
600W
COLOR*
I, W, A, T
6633-PL
600W
I, W, A, T
6628
300W or 300VA I, W, A
per circuit;
600W/600VA Total
Low Voltage U R
1.73 (43.9)
6631-LW
1.34
(34.0)
DESCRIPTION
CAT. NO.
SureSlide Magnetic Low-Voltage Dimmer, Single-Pole or 6613-PL
3-Way with Preset On/OFF Switch, with optional use LED
SureSlide Electronic Low-Voltage Dimmer, Single-Pole or 6615-P
3-Way with Preset On/OFF Switch
RATING
600VA (450W)
COLOR*
I, W, A, T
300W
W, T
Advance Mark 10® Powerline /Philips Marathon™ U R
2.70 (68.6)
4.13 (104.9)
3.28 (83.3)
Lighting Controls
DESCRIPTION
SureSlide Dimmer for Mark 10 PowerLine /
Phillips Marathon Ballasts, Single-Pole
1.73 (43.9)
CAT. NO.
6668
RATING
COLOR*
Mark 10
I, W
500W-120V,
Philips Dimmable
Marathon–
350W-120V
DESCRIPTION
SureSlide Single-Pole
CAT. NO.
6627-1
RATING
5A
COLOR*
I, W (Also available
in Brown)
SureSlide Single-Pole or 3-Way with Preset ON/OFF
6637-P
5A
I, W, A
DESCRIPTION
CAT. NO.
RATING
COLOR* (Brown not
available)
SureSlide Single-Pole or 3-way Quiet Step with
Preset ON/OFF
SureSlide Dual Quiet Fan Speed Control and Dimmer
6629-3
1.5A
I, W, A, GY
6630
1.5A Fan Control/ I, W, A, T, GY
300W Dimmer
Full-Range Fan Speed Control U R
Quiet Step Fan Speed Controls
1.34
(34.0)
UR
6633-PLW
See Page C7 for more information on Leviton Power Extenders
CAUTION ON RETROFITS: When retrofitting Mark 10™ Powerline dimming ballasts into fixtures that originally had Instant
Start ballasts, the sockets MUST be replaced with Rapid Start sockets to allow proper dimmer operation and prevent
damage to the dimming ballast. Refer to the instructions provided with the ballast and the Leviton dimmer.
SPECIFICATIONS AND FEATURES
Use Leviton Power Extenders to extend
the load capacity of box-mounted dimmers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark 10® Powerline fluorescent dimming ballasts or equivalents,
and 0–10 VDC dimmable fluorescent
ballasts such as Advance Mark 7®
0–10V, OSRAM Sylvania Quicktronic
Helios or equivalent ballasts.
• All SureSlide devices have a permanently mounted
smooth-action integrated linear slide control for easy,
precise operation
• SureSlide features a slim, compact housing that fits
easily into a standard wallbox and is suitable for
multi-gang installations
• Preset versions provide single-pole (one-location) and
3-way (multi-location) lighting control when used with
a 3-way switch
• Illuminated versions feature optional-use Locator LED
• SureSlide’s attractive Decora styling coordinates
perfectly with Leviton’s complete line of Decora
wiring devices
• Compatible with Decora screwless and Decora
standard designer wallplates
• Built-in radio/TV interference filter
• Quiet 1.5 Amp Fan Speed Controls are ideal for
libraries, study rooms and any area where ceiling fan
noise could become distracting. Full range 5-amp fan
speed controls also available
• SureSlide Cat. No. 6668 is specially designed to
work with the Philips Dimmable Marathon™
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Limited Five-Year Warranty
*COLOR
To order colors, add suffix to catalog number as
follows: Ivory (-I), White (-W), Almond (-A), Light
Almond (-T), Gray (-GY) and Black (-E). Basic Cat. No.
denotes Brown where Brown is available.
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
C
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
32
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TRIMATRON™ CONTROLS • 600 WATTS
Residential Grade Controls
RATING
600W-120V AC
COLOR*
I, W, A
6683
600W-120V AC
I, W, A
6602
6602-220
I, W
W
80400
600W-120V AC
600W-220V
50Hz
—
Dimmer Knobs with metal insert
(packed 25 per box)
26115
—
2.16 (54.9)
CAT. NO.
6681
3.28 (83.3)
DESCRIPTION
Trimatron Incandescent Dimmer, push-ON/
push-OFF, Single-Pole
Trimatron Incandescent Dimmer, push-ON/
push-OFF 3-Way
Trimatron Incandescent Dimmer, Single-Pole
Trimatron Incandescent Dimmer Single-Pole
(Not UL Listed or CSA Certified)
Decora Plastic Adapter for Rotary Dimmers —
plastic, standard size; fits over .406" dimmer shaft
4.00 (101.6)
Trimatron™ Deluxe Full Range Rotary Controls
Trimatron Incandescent Rotary Dimmers 600 Watts U R
I, W, A, E
(Basic Cat. No.
denotes Brown)
I, W, A, T, E
(Basic Cat. No.
denotes Brown)
1.59 (40.4)
6602-W
0.92
(23.4)
Note: All dimmers have a ground wire.
RATING
5A-120V AC
1.5A-120V AC
COLOR*
I, W
I, W
See Page C7 for more information on Leviton Power Extenders
2.23 (56.6)
CAT. NO.
6616-X
6639
3.28 (83.3)
DESCRIPTION
Trimatron Full-Range Fan Speed Control
Trimatron Quiet Fan Speed Control
4.12 (104.6)
Trimatron Fan Speed Controls 120V AC 60Hz Only U R
1.73 (44.0)
1.73 (44.0)
6616-XW
1.38
(35.1)
TESTING AND CODE COMPLIANCE
3.28 (83.3)
*COLOR
Add suffix to catalog numbers as follows to select
colors: Ivory (-I), White (-W), Almond (-A), Light
Almond (-T) and Black (-E). Cat. Nos. 80400 and
26115 also available in Brown (no suffix).
2.69 (68.4)
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Five-Year Warranty
4.12 (104.6)
SPECIFICATIONS AND FEATURES
• Leviton Trimatron lighting controls are traditional
rotary-style dimmers featuring an ultra-compact
design that fits in even the tightest single-gang
wallboxes and is suitable for multi-gang
installations
• Built-in radio/TV interference filter
• Quiet 1.5 Amp Trimatron Fan Speed Controls are
ideal for libraries, study rooms and any area where
ceiling fan noise could become distracting. Full
range 5-Amp fan speed controls also available
• Wire leads provided for fast, easy assembly
and wiring
1.30
(33.1)
2.23 (56.6)
3.28 (83.3)
4.12 (104.6)
6681-W
Lighting Controls
Use Leviton Power Extenders to extend the load capacity of box-mounted dimmers. Leviton Power Extenders are available
for incandescent, magnetic low-voltage, electronic low-voltage, Advance Mark 10® Powerline fluorescent dimming
ballasts or equivalents, and 0–10 VDC dimmable fluorescent ballasts such as Advance Mark 7® 0–10V, OSRAM Sylvania
Quicktronic Helios or equivalent ballasts.
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
1.73 (44.0)
6639-W
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
1.38
(35.1)
C
33
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
INCANDESCENT LIGHTING CONTROLS • 500–600 WATTS • 120V AC 60Hz
Residential Grade Lighting Controls
Incandescent Lighting Controls
3.28 (83.3)
3.99 (101.4)
Toggle Dimmers 600 Watts 120V AC 60Hz Only U R
DESCRIPTION
CAT. NO.
RATING
Incandescent Dimmer, Single-Pole
Incandescent Dimmer for Single-Pole or 3-Way
Incandescent Dimmer, Single-Pole, Illuminated
Incandescent Dimmer, Single-Pole or 3-way, Illuminated
6641
6643
6691
6693
600W-120V AC
600W-120V AC
600W-120V AC
600W-120V AC
COLOR*
(Basic Cat. No.
Denotes Brown)
I, W,
I, W
Clear
Clear
Decora® 911 Flasher 500 Watts 120V AC 60Hz Only U R
1.75 (44.5)
1.90
(48.3)
CAT. NO.
911
RATING
500W-120V AC
COLOR*
I, W, A
2.65 (67.3)
4.14 (105.0)
3.28 (83.3)
Lighting Controls
6641-W
DESCRIPTION
Decora 3-Position Emergency Flasher Rocker Switch,
Incandescent only
2.39 (60.7)
911-W
1.43
(36.4)
SPECIFICATIONS AND FEATURES
Toggle Dimmers
• Easy-to-install shallow design replaces standard
switch in single wallbox
• Built-in radio/TV interference filter
• Positive ON/OFF action with smooth, full-range
brightness control
911 Switch
• 911 replaces standard single-pole switch and
alerts neighbors and helps emergency personnel
locate a house quickly
• 911 Switch has standard ON/OFF operation plus a
special illuminated “FLASH” position that causes
controlled lighting to flash ON and OFF at one
second intervals
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Five-Year Warranty
*COLOR
Basic Cat. No. denotes Brown where indicated. Add
suffix to catalog number as follows for other colors:
Ivory (-I), White (-W), and Almond (-A).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
C
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
34
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
INCANDESCENT LIGHTING CONTROLS • 150–500 WATTS • 120V AC 60Hz
Residential Grade Lighting Controls
Specialty Dimmers and Sockets
RATING
500W
COLOR*
W, I, A
1420
200W
Full-Range Feed-through Lamp-Cord Dimmer
(Individually boxed)
(not UL Listed or CSA Certified)
Tabletop Dimmer for plug-in lamps
6250-3
200W
TBI03
300W
W
(Basic Cat. No.
Denotes Brown)
I
(Basic Cat. No.
Denotes Brown)
W, E
CAT. NO.
6151
RATING
150W
COLOR*
(Non-color item)
Dimmer Socket 120V AC 60Hz Only U R
DESCRIPTION
Full-Range Compact Dimmer Socket
(1/8 I.P.S Thread and Set Screw)
2.65 (67.3)
CAT. NO.
6161
3.28 (83.3)
DESCRIPTION
Decora 4-Level Step Dimmer
Incandescent only
HI-LO Feed-through Lamp-Cord Dimmer
4.13 (105.0)
Incandescent Dimmers 120V AC 60Hz Only U R
1.73 (43.4)
1.53
(38.9)
6161-W
1.50 (38.1)
6151
SPECIFICATIONS AND FEATURES
Four-Level Step Dimmer
• Eliminates guesswork — user selects one of four
preset lighting levels (25%, 50%, 75%, 100%)
• Easily installs in place of single-pole switch
• LED indicates selected level of brightness
• Sleek designer styling; can be ganged with other
Decora devices
Lamp Cord and Socket Dimmers
• Compact Dimmer Socket interchangeable with
standard lampholder for dimmer conversion
(eliminates need for expensive 3-way bulbs)
• Full-Range Feed-Through Lamp Cord Dimmer
provides full-range dimming with positive ON/OFF
action in a completely insulated plastic housing
Lighting Controls
2.66 (67.5)
1.25 (31.7)
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-3810) – 6151; (File #E-7458) –
1420; (File #E-7442) – 6250-3
• CSA Certified (File #LR-1863) – 6151;
(File #LR-3413) – 1420
• Backed by a Limited Five-Year Warranty
*COLOR
Basic Cat. No. denotes Brown where indicated. Add
suffix to catalog number as follows for other colors:
Ivory (-I), White (-W).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
C
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
35
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
HOW TO USE THIS CATALOG
The L-101 Leviton Wiring Device Catalog is designed to help you find the device you’re seeking in the quickest and easiest way
possible. Most product sections are divided into three distinct categories in the following sequence—Industrial Grade, Commercial
Grade and Residential Grade—and grouped according to amperage and voltage, lowest to highest. For example, if you need to
order 15 Amp, 125 Volt Industrial Grade straight-blade duplex receptacles, begin your search with the main Table of Contents at the
front of the book. Here you’ll see that all straight blade receptacles are listed in Section G. Turn to Section G for a more detailed Table
of Contents on the first page. Each section page contains product descriptions, ratings and catalog numbers. There are also helpful
highlights including Specifications and Features, Testing and Code Compliance, Color listing, Material Characteristics and dimensioned color product photos. Any product page in the L-101 Catalog can be clearly copied or faxed to customers and prospects for
use as a specifier sheet or as part of a presentation.
The Quick Reference Guide follows the main Table of Contents to help you pinpoint and locate specific products. Technical
Section V provides general product and test data, industry standards, NEMA configuration charts, a glossary of wiring device
terms, ANSI architectural symbols and other related information. Specific catalog numbers are listed in the exhaustive index at
the back of the catalog.
A
B
D
C
G
E
F
H
I
K
L
J
A RATING
E CATALOG NUMBER
I SPECIFICATIONS & FEATURES
B Choose GRADE, if appropriate
F DESCRIPTION
J TESTING AND CODE COMPLIANCE
C DIMENSIONED PHOTOGRAPH
G Check for NEMA CONFIGURATION
K COLOR LISTING
D WIRING/CERTIFICATIONS
H WALLPLATE REFERENCE, if appropriate
L MATERIAL CHARACTERISTICS
C
36
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement