POWERAMP CM Series dock leveler Owner's/User's Manual

Below you will find brief information for dock leveler CM Series. The CM Series mechanical dock leveler safely and efficiently lowers and raises the platform to match the height of the transport vehicle bed, preventing damage to the dock and vehicle. This manual will provide you with detailed instructions for installation, operation, and maintenance, ensuring you get the most out of your CM Series dock leveler.

PDF Download
Document
dock leveler CM Series Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Mechanical dock leveler
  • Simple and efficient design
  • Designed for long-term performance
  • Minimum maintenance requirement
  • Secure and safe operation
  • Adjustable lift arm and lip assist spring tension
  • Easy to operate

Frequently asked questions

The CM-series mechanical dock leveler is designed to compensate for a maximum ± 12 inches (305 mm) of height difference between the loading dock and the transport vehicle bed.

To raise the platform, pull and hold the platform release ring located in the recess at the rear of the platform. To lower the platform, walk out onto the platform.

Always chock the transport vehicle wheels before operating the dock leveler. Do not activate the dock leveler until the transport vehicle is positioned squarely against the dock bumpers. Never remove the wheel chocks until loading and unloading is finished and the transport vehicle driver has been given permission to leave. Keep hands and feet clear of pinch points and avoid putting any part of your body near moving parts. Never attempt to walk on an unsupported lip.
Preparing document for printing…
0%