- No category
advertisement
PAM-120A/340A/480A
Public Address Amplifier
OC03
CHANNEL 1 CHANNEL 2 CHANNEL 3
MIN MAX MIN MAX MIN
CHANNEL 4 CHANNEL 5
MAX MIN MAX MIN
CHANNEL 6
MAX MIN
BASS TREBLE MASTER
MAX
12dB 12dB 12dB 12dB
MIN MAX
CHIME
SP 1 SP 2
SPEAKER
SP 3 SP 4 SP 5 ALL
ON
OFF
4
6
8
11
14
19
24
2
0
2
PROT
POWER
B370031
Welcome
Warning.........................................................................................................................................1
Unpacking ......................................................................................................................................2
Installation
Environment....................................................................................................................................2
Important Safety Instructions.............................................................................................................2
Features
............................................................................................................................................3
Accessories.....................................................................................................................................3
Operation
........................................................................................................................................3
Front Panel
......................................................................................................................................4
Rear Panel
PAM-120A .....................................................................................................................................6
PAM-340A/480A...........................................................................................................................8
Connecting Speakers
...................................................................................................................11
Applications
PAM-120A ...................................................................................................................................13
PAM-340A/480A.........................................................................................................................14
Block Diagram
PAM-120A ...................................................................................................................................15
PAM-340A/480A.........................................................................................................................16
Specifications
................................................................................................................................17
Service
Procedures....................................................................................................................................18
Schematic .....................................................................................................................................18
Parts List .......................................................................................................................................18
Variations and Options
...............................................................................................................18
Warranty
.......................................................................................................................................18
PUBLIC ADDRESS AMPLIFIER
A personal welcome to you from the management and employees of Inter-M
All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products.
We sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete satisfaction, we will endeavor to make things right.
Welcome to Inter-M, and thank you for becoming part of our worldwide extended family!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operation and maintenance
(servicing) instructions in the literature accompanying the appliance.
Caution: To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.
Attentions: Pour prévenir les chocs électriques ne pas utiliser cette fiche polarisée avec un prolongateur, une prise de courant on une autre sortie de courant, sauf si les lames peuvent
étre insérées à fond sans en laisser aucune partie à découvert.
*Do not install this equipment in a confined space such as a book case or similar unit.
*The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such vases, shall be placed on the apparatus.
*Worded: “WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING-WATER AND MOISTURE: Unit should not be used near water(e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so than objects do not fall and liquids are not spilled into the enclosure through openings.”
PAM-120A/340A/480A
1
PUBLIC ADDRESS AMPLIFIER
Unpacking
Although your PAM-120A or PAM-340A or PAM-480A is neither complicated nor difficult to operate, we recommend you take a few minutes to read this brief manual and familiarize yourself with the important information regarding product features, setup and operation.
As with most electronic devices, we strongly recommend you retain the original packaging. In the unlikely event the product must be returned for servicing, the original packaging (or reasonable equivalent) is required.
Environment
Never place this product in an environment which could alter its performance or reduce its service life. Such environments usually include high levels of heat, dust, moisture, and vibration.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
S3125A
S3125A
2
PAM-120A/340A/480A
PUBLIC ADDRESS AMPLIFIER
- MODULAR DESIGN
Optional modules can be installed in multiple configurations for convenience and ease of use. Choose the
PAM-CDA (Compact Disc), PAM-T (AM/FM Tuner) or PAM-D (Cassette Deck) modules to expand the
PAM-120A/340A/480A’s audio capabilities.
- INDIVIDUAL INPUT GAIN CONTROLS
Rear-panel gain controls for each input channel for total control of individual levels.
- SPEAKER SELECT
Six speaker select switches enable you to select any combination of up to five speakers.
- SELECTABLE PRIORITY MUTING
Switchable audio signal priority for Channels 1 and 2, Chime and Telephone input over other input sources.
- REMOTE CONTROL INPUT (only PAM-340A/480A)
Individual speaker zones can be selected and chime can be operated by wired remote control.
- ANNOUNCEMENT CHIME
Convenient four-tone chime for use with announcements.
- EM(EMERGENCY) - OPTIONAL EMERGENCY VOICE IC (only PAM-340A/480A)
When EM switch is pressed in emergencies, EM broadcasting stored in VOICE IC is outputted.
Make certain that speakers and input sources are properly connected before switching on.
Keep volume levels turned down before switching on.
NOTE:
The system’s operation is delayed by approximately three seconds after pressing the power switch. This is due to the built-in protection circuitry, designed to protect the speakers and other system components.
PAM-120A/340A/480A
3
PUBLIC ADDRESS AMPLIFIER
1 2 3
CHANNEL 1
CHANNEL 2 CHANNEL 3
MIN MAX MIN MAX MIN
CHANNEL 4
CHANNEL 5
MAX MIN MAX MIN
CHANNEL 6
MAX MIN
BASS TREBLE MASTER
MAX
12dB 12dB 12dB 12dB
MIN
MAX
CHIME
SP 1 SP 2
SPEAKER
SP 3 SP 4 SP 5 ALL
ON
OFF
14
19
8
11
24
PROT
2
0
2
4
6
POWER
4 5 6 7 8 9 10
1. TUNER MODULE BAY
This panel provides for installation of optional PAM-T (AM/FM Tuner) Module, via the unit’s internal connectors.
2. CASSETTE DECK AND CD MODULE BAY
This panel provides for installation of optional PAM-CDA (CD Player) or PAM-D (Cassette Deck) Modules, via the unit’s internal connectors.
3. OUTPUT LEVEL DISPLAY
This seven-segment LED meter indicates the amplifier’s output level in RMS.
4. CHANNEL 1-6 VOLUME
Controls the individual volume levels of Channels 1-6.
5. TONE CONTROL
Individual Bass and Treble controls are used to cut (decrease) or boost (increase) the lower and higher frequencies ±12dB.
6. MASTER VOLUME
This rotary switch controls the overall output volume of the amplifier’s output signal.
7. CHIME BUTTON
Pressing this switch activates the chime circuitry.
4
PAM-120A/340A/480A
PUBLIC ADDRESS AMPLIFIER
8. SPEAKER SELECTOR SWITCHES
These switches are used to select output to any combination of up to five individual speakers.
9. POWER SWITCH
Pressing this switch turns the unit on, as indicated by the Power LED above the switch. Pressing it again turns the unit off.
10. PROTECTION INDICATOR
This LED indicates the state of the amplifier’s protection circuitry. When the Protection LED is on (illuminated), the protection circuitry is active, indicating that the unit is not operating normally. This is typically due to overheating or power limiting. Please check the Input and Output condition of the amplifier.
PAM-120A/340A/480A
5
PUBLIC ADDRESS AMPLIFIER
Rear Panel
(PAM-120A)
4
SPEAKER SELECTOR
Ω SP 5 SP 4 SP 3 SP 2 SP 1
COM
~
AC INPUT
230V 50Hz, 135W
IMPEDANCE SELECTOR
100V
(83
Ω)
70V
(42
Ω)
FM
MODEL NO. PAM-120A
PUBLIC ADDRESS AMPLIFIER
OUTPUT POWER: 120W
COM AM
LINK IN EXT
CHIME
EXT
MUTE
DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
AVIS;
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.
S N
MADE IN KOREA
DC INPUT
24V PREAMP OUT AMP IN
www.inter-m.com
1. SPEAKER OUTPUT TERMINAL STRIP
Connect up to five individual speakers to this strip.
Impedances for 4Ω, 70V and 100V operation are shown below. Connect speakers whose combined impedance is equal to or higher than the rated output impedance, as shown below.
2. IMPEDANCE SELECTOR
Selects between high impedance operation at 70V or 100V distributed systems. Note that when speakers are connected to the 4Ω terminal, this switch is inactive.
MODEL
PAM-120A
4Ω
22V
70V
42Ω
100V
83Ω
3. ANTENNA CONNECTOR (OPTIONAL)
This terminal is used to connect the antenna, when used with the optional PAM-T AM/FM Tuner module.
4. EQ CONTROLS
Three-band equalization control provides ±12dB of cut (decrease) or boost (increase) over the high, mid and low frequency ranges of the individual channel signals.
HIGH – 10kHz, ±12dB MID – 1kHz, ±12dB LOW – 100Hz, ±12dB
5. PHANTOM POWER SWITCH
This switch turns the phantom power supply on or off for all channels. When the switch is turned on, +22V DC power is supplied to pins 2 and 3 of each channel’s input connector.
Use phantom power when connecting condenser microphones, which require an external power supply.
NOTE:
It is safe to connect most modern dynamic microphones or line level devices to the channel inputs when phantom power is activated. However, some older ribbon microphones may be damaged by phantom power, and certain unbalanced line level devices may malfunction or produce an audible hum when phantom power is active.
6
PAM-120A/340A/480A
PUBLIC ADDRESS AMPLIFIER
6. PRIORITY SWITCH
When selected, these switches will give priority to Channels 1 and/or 2 over all other channels and audio inputs.
7. AC POWER INPUT
Connect a standard three-pin AC cable your AC outlet.
8. EXT CHIME
When these two terminals are shorted, the four-tone chime circuitry is activated.
9. EXT MUTE
When these two terminals are shorted by wired remote, signals from Input Channels 3-6 and any optional modules are muted. Signals from Channel 1, Channel 2, Link In and Chime are not muted.
10. DC INPUT TERMINALS
These terminals are provided for the connection of backup battery. Connect a 24VDC battery source to these terminals. Make certain the red terminal is connected to the battery’s positive (+) side, and the black terminal to the battery’s negative (–) side.
11. PREAMP OUTPUT
This output connects the unit with an external power amplifier. Inserting a plug into the Preamp Out jack will disconnect signal to the unit’s power amp, sending the output of the internal mixer to the external amplifier.
12. AMP IN
This input connects an external mixer or preamp with the unit’s power amp. Inserting a plug into the Amp In jack will disconnect all input signal from the unit’s internal mixer. Only signal from the external source will be heard.
13. LINK IN
This line-level input connects the unit with an external mixer for expanded input channels.
14. CHANNEL INPUTS 1-6
These balanced three-pin XLR connectors accept a standard microphone cable or other low impedance signal.
Optional phone jack, screw terminal, RCA jack or transformer balanced inputs are also available.
15. INPUT GAIN CONTROLS
These knobs provide continuous control of the input levels for each of the six input channels. When adjusting the input gain, make certain that the levels are not set too high, or distortion will result.
The approximate levels for these controls are as follows:
MIC
MIC ATT
AUX mic level instrument level line level
(-50dB ~ -60dB)
(-30dB ~ -50dB)
(-20dB ~ -30dB)
PAM-12A/340A/480A
7
PUBLIC ADDRESS AMPLIFIER
Rear Panel
(PAM-340A/480A)
SPEAKER SELECTOR
SP 5 SP 4 SP 3 SP 2 SP 1
COM
~
AC INPUT
230V 50Hz, 360W
FM
MODEL NO. PAM-480A
PUBLIC ADDRESS AMPLIFIER
OUTPUT POWER: 480W
COM AM
EM EXT
CHIME
EXT
MUTE
CAUTION;
DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
AVIS;
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.
S N
MADE IN KOREA
LINK IN
REMOTE AMPLIFIER PREAMP OUT AMP IN
www.inter-m.com
PRIORITY
PHANTOM PHANTOM
HIGH
PHANTOM
+12
-12
HIGH
PHANTOM
+12
-12
HIGH
PHANTOM
+12
-12
HIGH
+12
-12
HIGH
PRIORITY
PHANTOM
+12
-12
HIGH
+12
-12
MID
LOW
TRIM
+12
-12
MID
+12
-12
LOW
-60
-16
TRIM
+12
-12
+12
-12
MID
LOW
-60
-16
TRIM
+12
-12
+12
-12
-60
-16
MID
LOW
TRIM
+12
-12
+12
-12
-60
-16
MID
LOW
TRIM
+12
-12
+12
-12
-60
-16
MID
LOW
TRIM
+12
-12
+12
-12
-60
-16
CH 6 CH 5 CH 4 CH 3 CH 2 CH 1
1. SPEAKER OUTPUT TERMINAL STRIP
Connect up to five individual speakers to this strip.
Impedances for 100V operation are shown below. Connect speakers whose combined impedance is equal to or higher than the rated output impedance, as shown below.
MODEL
PAM-340A
PAM-480A
100V
29.4Ω
20.8Ω
2. ANTENNA CONNECTOR (OPTIONAL)
This terminal is used to connect the antenna, when used with the optional PAM-T AM/FM Tuner module.
3. EQ CONTROLS
Three-band equalization control provides ±12dB of cut (decrease) or boost (increase) over the high, mid and low frequency ranges of the individual channel signals.
HIGH – 10kHz, ±12dB MID – 1kHz, ±12dB LOW – 100Hz, ±12dB
4. PHANTOM POWER SWITCH
This switch turns the phantom power supply on or off for all channels. When the switch is turned on, +22V
DC power is supplied to pins 2 and 3 of each channel’s input connector.
Use phantom power when connecting condenser microphones, which require an external power supply.
NOTE:
It is safe to connect most modern dynamic microphones or line level devices to the channel inputs when phantom power is activated. However, some older ribbon microphones may be damaged by phantom power, and certain unbalanced line level devices may malfunction or produce an audible hum when phantom power is active.
8
PAM-120A/340A/480A
PUBLIC ADDRESS AMPLIFIER
5. PRIORITY SWITCH
When selected, these switches will give priority to Channels 1 and/or 2 over all other channels and audio inputs.
6. AC POWER INPUT
Connect a standard three-pin AC cable to your AC outlet.
7. EM
When EM switch is connected and pressed in fire or other emergencies, EM broadcasting stored in VOICE IC is outputted.
* Remove an input jack from AMP IN not to affect Emergency signal to be played or adjust the main audio signal to adequate level for emergency broadcasting.
8. EXT CHIME
When these two terminals are shorted by wired remote (see item 14 above), the four-tone chime circuitry is activated.
9. EXT MUTE
When these two terminals are shorted by wired remote (see item 14 above), signals from Input Channels 3-6 and any optional modules are muted. Signals from Channel 1, Channel 2, Link In and Chime are not muted.
10. REMOTE CONTROL INPUT
By connecting a 15-pin D-SUB connector, it is possible to control speaker zone selection and activate the chime via wired remote. Connection terminals for the remote are shown below.
Pin 1: Remote amplifier input signal hot(+)
Pin 2: Remote amplifier input signal cold(–)
Pin 3: Signal ground
Pin 4: Remote control 1(Speaker 1)
Pin 5: Remote control 2(Speaker 2)
Pin 6: Remote control 3(Speaker 3)
Pin 7: Remote control 4(Speaker 4)
NOTE:
Remote controller is used to RM-01.
Pin 8: Remote control 5(Speaker 5)
Pin 9: Remote control ground
Pin 10: DC +24V
Pin 11: Input Chime
Pin 12: NC
Pin 13: NC
Pin 14, 15: NC
11. PREAMP OUTPUT
This output connects the unit with an external power amplifier. Inserting a plug into the Preamp Out jack will disconnect signal to the unit’s power amp, sending the output of the internal mixer to the external amplifier.
12. AMP IN
This input connects an external mixer or preamp with the unit’s power amp. Inserting a plug into the Amp In jack will disconnect all input signal from the unit’s internal mixer. Only signal from the external source will be heard.
13. LINK IN
This line-level input connects the unit with an external mixer for expanded input channels.
PAM-120A/340A/480A
9
PUBLIC ADDRESS AMPLIFIER
14. CHANNEL INPUTS 1-6
These balanced three-pin XLR connectors accept a standard microphone cable or other low impedance signal. Optional transformer balanced inputs are also available.
15. INPUT GAIN CONTROLS
These knobs provide continuous control of the input levels for each of the six input channels. When adjusting the input gain, make certain that the levels are not set too high, or distortion will result.
The approximate levels for these controls are as follows:
MIC
MIC ATT
AUX mic level instrument level line level
(-50dB ~ -60dB)
(-30dB ~ -50dB)
(-20dB ~ -30dB)
10
PAM-120A/340A/480A
PUBLIC ADDRESS AMPLIFIER
Before connecting speakers, disconnect the AC power cable. Note the proper connecting terminals as shown below. Make certain that the total impedance is not less than the rated impedance indicated.
- CONNECTING 4Ω OR 8Ω SPEAKER SYSTEMS (only PAM-120A)
When connecting conventional 4Ω or 8Ω speaker systems, connect the speaker’s positive (+) side to the terminal labeled 4. Connect the speaker’s negative (–) side to the terminal labeled COM. See illustration below:
SPEAKER OUTPUT
SP 1 SP 2 SP 3 SP 4 SP 5
COM
- CONNECTING HIGH-VOLTAGE DISTRIBUTED SPEAKER SYSTEMS
When connecting a high-impedance speaker system in parallel, you can connect speakers with a total rated input of up to 120W (PAM-120A) or 340W (PAM-340A) or 480W(PAM-480A).
SPEAKER SELECTOR
SP 5 SP 4 SP 3 SP 2 SP 1
10W 10W 10W 10W
COM
Total rated input of up to 120W (PAM-120A) or 340W (PAM-340A) or 480W(PAM-480A)
PAM-120A/340A/480A
11
PUBLIC ADDRESS AMPLIFIER
For example, if you are connecting speakers with a rated input of 15W, you can connect up to 8 speakers in parallel, as shown below:
SPEAKER SELECTOR
SP 5 SP 4 SP 3 SP 2 SP 1
15W 15W 15W 15W
COM
15Wx8 units(120W(PAM-120A))
WARNING:
Extreme care must be exercised when connecting low-impedance systems, as potentially hazardous voltages may be present at these terminals.
Do not install this equipment in a confined space with less-than-adequate ventilation.
12
PAM-120A/340A/480A
PUBLIC ADDRESS AMPLIFIER
Applications
(PAM-120A)
4
SPEAKER SELECTOR
COM
~
AC INPUT
230V 50Hz, 135W
EXT
CHIME
EXT
MUTE
CAUTION;
DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
AVIS;
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.
S N
MADE IN KOREA
IMPEDANCE SELECTOR
100V
(83
Ω)
70V
(42
Ω)
FM
MODEL NO. PAM-120A
PUBLIC ADDRESS AMPLIFIER
OUTPUT POWER: 120W
COM AM
LINK IN
DC INPUT
24V PREAMP OUT AMP IN
www.inter-m.com
•
OTHER SOURCE
•
PAM-120A/340A/480A
13
PUBLIC ADDRESS AMPLIFIER
Applications
(PAM-340A/480A)
•
OTHER SOURCE
SPEAKER SELECTOR
SP 5
(IMPEDANCE: 20.8
SP 4 SP 3
Ω)
SP 1
COM
~
AC INPUT
230V 50Hz, 360W
FM
MODEL NO. PAM-480A
PUBLIC ADDRESS AMPLIFIER
OUTPUT POWER: 480W
COM AM
EM EXT
CHIME
EXT
MUTE
CAUTION;
DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
AVIS;
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.
S N
MADE IN KOREA
LINK IN
REMOTE AMPLIFIER PREAMP OUT AMP IN
www.inter-m.com
PRIORITY
PHANTOM PHANTOM
HIGH
PHANTOM
+12
-12
HIGH
PHANTOM
+12
-12
HIGH
PHANTOM
+12
-12
HIGH
+12
-12
HIGH
PRIORITY
PHANTOM
+12
-12
HIGH
+12
-12
MID
LOW
TRIM
+12
-12
+12
-12
MID
LOW
-60
-16
TRIM
+12
-12
MID
+12
-12
LOW
-60
-16
TRIM
+12
-12
MID
+12
-12
LOW
-60
-16
TRIM
+12
-12
+12
-12
MID
LOW
-60
-16
TRIM
+12
-12
+12
-12
MID
LOW
-60
-16
TRIM
+12
-12
+12
-12
-60
-16
CH 6 CH 5 CH 4 CH 3 CH 2 CH 1
RM-05A
•
14
PAM-120A/340A/480A
Block Diagram
(PAM-120A)
PUBLIC ADDRESS AMPLIFIER
PAM-120A/340A/480A
15
PUBLIC ADDRESS AMPLIFIER
Block Diagram
(PAM-340A/480A)
16
PAM-120A/340A/480A
PUBLIC ADDRESS AMPLIFIER
Rated Output Power.................................................................................PAM-120A(THD 1%) : 120W (RMS)
..........................................................................................................
PAM-340A(THD 3%) : 340W (RMS)
..........................................................................................................
PAM-480A(THD 3%) : 480W (RMS)
Frequency Response
Amp In ....................................................................................................................................80Hz~20kHz
Link In......................................................................................................................................80Hz~15kHz
CH1~CH6................................................................................................................................120Hz~8kHz
Remote In ...........................................................................................120Hz~8kHz(PAM-340A, PAM-480A)
T.H.D.(at 1kHz Rated Output)...................................................................................Less than 1%(PAM-120A)
T.H.D.(at 1kHz Half Power Output) .....................................................Less than 0.5%(PAM-340A, PAM-480A)
S/N
Amp In .............................................................................................................Better than 90dB(PAM-120A)
.........................................................................................................
Better than 88dB(PAM-340A/480A)
Link In .................................................................................................................................Better than 65dB
CH1~CH6 ...........................................................................................................................Better than 50dB
Remote In ...............................................................................................Better than 50dB(PAM-340A/480A)
Input Sensitivity/Impedance
CH1~CH6
TRIM VR -60dB Position ............................................................................................................1mV/10kΩ
TRIM VR -16dB Position ........................................................................................................158mV/10kΩ
Link In .................................................................................................................................100mV/10kΩ
Amp In ....................................................................................................................1V/47kΩ(PAM-120A)
....................................................................................................................
1V/20kΩ(PAM-340A/480A)
Remote In......................................................................................................1V/10KΩ(PAM-340A/480A)
Speaker Output/Impedance...................................................PAM-120A : 120W/4Ω, 70V/42Ω, 100V/83Ω
............................................................................................................
PAM-340A : 340W, 100V/29.4Ω
............................................................................................................
PAM-480A : 480W, 100V/20.8Ω
Preamp Output/Impedance ............................................................................................................1V/600Ω
Tone Control (100Hz, 10kHz)..............................................................................................................±12dB
CH1~CH6 EQ Control (100Hz, 1kHz, 10kHz) ......................................................................................±12dB
- GENERAL
Power Source.......................................100–120VAC or 220V–240VAC; 50/60Hz, 24V DC(only PAM-120A)
..............................................................
(Supplied AC mains transformer depends on country requirements)
Power Consumption ..................PAM-120A : 135W(1/8 POWER), 200W(1/3 POWER), 300W(FULL POWER)
...............................................
PAM-340A : 260W(1/8 POWER), 400W(1/3 POWER), 620W(FULL POWER)
...............................................
PAM-480A : 360W(1/8 POWER), 550W(1/3 POWER), 880W(FULL POWER)
Weight .................................................................................................................PAM-120A : 13kg/28.7lb
.....................................................................................................................
PAM-340A : 13.5kg/29.7lb
.....................................................................................................................
PAM-480A : 15.5kg/34.2lb
Dimensions ........................................................420(W) x 132(H) x 360(D)mm/16.5(W) x 5.2(H) x 14.2(D)in
Operation Temperature..........................................................................................14F~104F (-10°C~+40°C)
* Specifications and design subject to change without notice.
PAM-120A/340A/480A
17
PUBLIC ADDRESS AMPLIFIER
Procedures
Ensure the problem is not related to operator error, or system devices that are external to this unit. Information provided in the troubleshooting portion of this manual may help with this process. Once it is certain that the problem is related to the product contact your warranty provider as described in the warranty section of this manual.
Schematic
A Schematic is available by contacting your warranty provider.
Parts List
A Parts List is available by contacting your warranty provider.
Variations
Products supplied through legitimate sources are compatible with local AC power requirements.
Options
No optional items are available for this product.
Warranty terms and conditions vary by country and may not be the same for all products. Terms and conditions of warranty for a given product may be determined first by locating the appropriate country which the product was purchased in, then by locating the product type.
To obtain specific warranty information and available service locations contact Inter-M directly(in Korea or the
USA) or the authorized Inter-M Distributor for your specific country or region.
18
PAM-120A/340A/480A
NOTE
NOTE
Inter-M, Ltd. (Korea) began operations in 1983.
Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world.
Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).
The company is no longer just a Korean company, but rather a global company that is truly international in scope, with factories and offices in Korea and China, and sales and marketing operations located in Japan, Europe, and the U.S.A.
With more than 850 employees around the globe,
Inter-M is well-poised for further growth and expansion.
INTER-M AMERICAS, INC.
1 EAST BEACON LIGHT LANE CHESTER, PA USA 19013-4409
TEL : 1-610-874-8870, FAX : 1-610-874-8890
Home Page : http://www.inter-m.net, E-mail : [email protected]
INTER-M Corporation
SEOUL OFFICE:653-5 BANGHAK-DONG, DOBONG-KU, SEOUL, KOREA
TEL : 82-2-2289-8140~8, FAX : 82-2-2289-8149
Home Page : http://www.inter-m.com, E-mail : [email protected]
MADE IN KOREA
September 2005 9007108310
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Warning
- 4 Unpacking
- 4 Environment
- 4 Important Safety Instructions
- 5 Accessories
- 8 PAM-120A
- 10 PAM-340A/480A
- 15 PAM-120A
- 16 PAM-340A/480A
- 17 PAM-120A
- 18 PAM-340A/480A
- 20 Procedures
- 20 Schematic
- 20 Parts List