Resistors

Resistors
Passive Devices
Resistors
CONTENTS
■Quick Reference of Resistance Range
・・・・・・・
P. D2
■Class-leading Compact Size Chip Resistors (RASMID series)
Ultra-Compact Chip Resistors (SMR 003 <009005>)
・・・・・・ P.
D3
■Thick Film Chip Resistors (Standard series)
Compact Chip Resistors (MCR series <01005 to 0805>) ・・・・・・・ P. D4
Chip Resistors (MCR series <1206 to 2512>) ・・・・・・・・・ P. D5
Compact Chip Resistor Networks (MNR series <0402×2 to 1206×4>) ・・・・・・ P. D6
8-element Chip Resistor Networks (MNR series <0603×5 to 1206×5>) ・・・・・・・ P. D7
■Thick Film Chip Resistors (High reliability series)
High Anti-surge Chip Resistors (SDR series) ・・・・・・・・ P. D8
Anti-surge Chip Resistors (ESR series) ・・・・・・・・・・・・・・・・・・・ P. D8
High Power Chip Resistors <Wide Terminal type> (LTR series) ・・・・・・ P. D9
High Voltage Resistance Chip Resistors (KTR series) ・・・・・P. D10
Tolerance for sulfurization chip resistor(SFR series) ・・・・・・・P. D11
D
Resistors
■Chip Resistors for Current Detection (Thick Film type)
Chip Resistors (Low Ohmic MCR series) ・・・・・・・・・・・・・・・P. D12
Low Ohmic Chip Resistors <Face down type> (UCR series) ・・・・・P. D13
High Power Chip Resistors <Wide Terminal type> (Low Ohmic LTR series) ・・・・・P. D14
■Chip Resistors for Current Detection (Metal plate type)
Ultra Low Ohmic Chip Shunt Resistors (PMR series)
Ultra Low Ohmic Chip Shunt Resistors <Wide Terminal type> (PML series)
High Power Ultra Low Ohmic Chip Shunt Resistors (PSR series)
High Power Low Ohmic Chip Shunt Resistors (GMR series)
■Standard Nominal Resistance Values
・・・・・P.
D15
・・・・・P.
D16
・・・・・P.
D17
・・・・・P.
D18
・・・・・・
P. D19
ISO9001- / ISO / TS 16949-approved
www.rohm.com
D1
Passive Devices
Resistors
▶ Quick Reference of Resistance Range
Quick Reference of Resistance Range
■Low Ohmic Resistor Lineup
Part No. / mm[inch] / Page
Power
Rating
(W)
PSR GMR PML PMR
Resistance[Ω]
0.1m
5
0.2m
1m
10m
0.3m
PSR400 / 10×5.2[3921] / P.D17
3m
3
0.3m
☆PSR100 / 6.35×3.05[2512] / P.D17
3m
PML100 / 6432[2512] / P.D16
1m
PML50 / 5025[2010] / P.D16 0.5m
PML18 / 3216[1206] / P.D16
0.5m
PML10 / 2012[0805] / P.D16 1m
10m
PMR100
/ 6432[2512]
PMR100
/ 6432[2512]
/ P.D15
PMR50
/ 5025[2010]
/ P.D15
PMR50
/ 5025[2010]
1m
1m
0.66
Thick Film
100m
1
10
☆GMR100 / 6432[2512] / P.D18
100m
10m
LTR100 / 6432[2512] / P.D14
910m
10m
5m
MCR100 / 6432[2512] / P.D12
47m
PMR18 / 3216[1206] / P.D15
9.1
LTR18 / 3216[1206] / P.D14
10m 10m
1
2.5m
2.5m
1/2
11m
2m
PMR10 / 2012[0805] / P.D15
1/3
47m
MCR50 / 5025[2010] / P.D12
9.1
47m
MCR25 / 3225[1210] / P.D12
9.1
UCR18 / 3216[1206] / P.D13
100m
LTR10 / 2012[0805] / P.D14
47m
10m
11m
PMR03 / 1608[0603] / P.D15 10m
9.1
UCR10 / 2012[0805] / P.D13 100m
1/4
1/5
220m
2.2m
1m
PMR25 / 3225[1210] / P.D15
1
LTR MCR
2.2m
1m
1.5
UCR
PSR500 / 15×7.75[5931] / P.D17 2m
4
2
Metal Strip
20m
47m
MCR18 / 3216[1206] / P.D12
9.1
47m
MCR10 / 2012[0805] / P.D12
9.1
UCR03 / 1608[0603] / P.D13
PMR01 / 1005[0402] / P.D15 10m
200m
UCR03 / 1608[0603] / P.D13
1/8
220m
910m
UCR01 / 1005[0402] / P.D13
68m
100m
1/10
910m
UCR006 / 0603[0201] / P.D13
910m
MCR03 / 1608[0603] / P.D12
1
9.1
1/16
MCR01 / 1005[0402] / P.D12
1
9.1
1/20
☆MCR006 / 0603[0201] / P.D12
1
9.1
☆:Under Development
■1 Ω or more Resistor Lineup
Part No. / mm[inch] / Page
Power
Rating
(W)
2
1
0.75
1/2
D
Resistors
2/5
1/3
Resistance[Ω]
1
100
LTR100 / 6432[2512] / P.D9
1
LTR50 / 5025[2010] / P.D9
1
1
1
1K
10K
KTR
LTR MCR SFR SMR
10M
100K
LTR18 / 3216[1206] / P.D9
1M
MCR50 / 5025[2010] / P.D5
560K
ESR25 / 3225[1210] / P.D8
1
ESR10 / 2012[0805] / P.D8
1
KTR25 / 3225[1210] / P.D10
10M
30M
10M
ESR18 / 3216[1206] / P.D8
15M
MCR25 / 3225[1210] / P.D5
1
MCR18 / 3216[1206] / P.D5
1
KTR18 / 3216[1206] / P.D10
LTR10 / 2012[0805] / P.D9
3.3M
10M
15M
1M
SDR03 / 1608[0603] / P.D8
1
ESR03 / 1608[0603] / P.D8
10M
1
ESR01 / 1005[0402] / P.D8
10M
1
MCR10 / 2012[0805] / P.D4
10M
1
KTR10 / 2012[0805] / P.D10
1
MCR03 / 1608[0603] / P.D4
1
KTR03 / 1608[0603] / P.D10
1
KTR03 / 1608[0603] / P.D11
10M
1
MCR01 / 1005[0402] / P.D4
10M
1
MCR01 / 1005[0402] / P.D11
10M
1/20
1
MCR006 / 0603[0201] / P.D4
1/32
1
1/8
1/10
1/16
1/50
10M
30M
10M
UCR03 / 1608[0603]
SMR003 / 03015[009005] / P.D3
10M
10M
MCR004 / 0402[01005] / P.D4
10
30M
1M
MCR100 / 6432[2512] / P.D5
1
Thick Film
1M
1
1
1M
100K
SDR
1
1/5
D2
10
1
1
1/4
ESR
3M
1M
www.rohm.com
Passive Devices
Resistors
▶ Class-leading Compact Size Chip Resistors(RASMIDTM series)
Class-leading Compact Size Chip Resistors(RASMID series)
Ultra-Compact Chip Resistors (SMR003 <009005>)
●
●
●
Original process technology ensures greater accuracy
Chip dimensional precision improved from ±20μm to ±10μm
Gold electrodes utilized for superior solderability and reliability
SMR003
SMR003 <009005>
Part No.
SMR003
Size code Rated power
(70℃)
mm(inch)
03015
(009005)
Limiting
element voltage
(V)
0.020W
(1/50W)
Tolerance
Temperature
coefficient
(ppm /℃)
J(±5%)
10
Resistance range
±200
F(±1%)
10 to
1MΩ (E24 Series)
10 to
1MΩ (E24 , 96 Series)
Operating
temperature range
(℃)
Automotive
Grade
Available
-55 to +125
―
※E24 : Standard products E96 : Custom products
Jumper type
Part No.
Size code
mm(inch)
Rated current
Resistance
Temperature range(℃)
Automotive Grade
Available
SMR003
03015 (009005)
0.5A
50mΩ Max.
-55 to +125
―
■Dimensions (Unit : mm)
●SMR003
Part No.
Size code
mm(inch)
L
W
t
a
b
SMR003
03015
(009005)
0.30 ± 0.01
0.15 ± 0.01
0.11 ± 0.01
―
0.07 ± 0.01
L
W
t
b
b
■Part No. Explanation
S M R 0 0 3
Part No.
R Z
J
Tolerance
F
J
Nominal resistance
±1%
±5%
Resistance code, 3 or 4 digits.
000 denotes jumper type.
Tolerance
F
J
Resistance
code
:
4 digits
:
3 digits
D
Resistors
Packaging specifications Code
Part No.
Code
SMR003
RZ
Tolerance
J(±5%)
◎
F(±1%)
◎
Packaging specifications
Reel
Embossed tape(1mm Pitch)
φ180mm (7inch)
Basic ordering unit(pcs)
40,000
Reel (φ180mm) : Compatible with JEITA standard“EIAJ ET-7200B”
◎ : Standard product
※RASMID : ROHM’
s proprietary new method that enables superior dimensional precision, making it possible to develop the ultra-compact products
www.rohm.com
D3
Passive Devices
Resistors
▶ Thick Film Chip Resistors (Standard series)
Thick Film Chip Resistors (Standard series)
Compact Chip Resistors (MCR series <01005 to 0805>)
High reliability chip resistors optimized
for a variety of applications.
●
・Nine package sizes, ranging from 01005 to 2512.
・Market-proven reliability.
MCR004
MCR006
MCR01
MCR03
MCR10
MCR series <01005 to 0805>
Part No.
MCR004
Limiting
element voltage
(V)
Size code Rated power
(70℃)
mm(inch)
0402
(01005)
0.031W
(1/32W)
15
0603
(0201)
0.05W
(1/20W)
25
Tolerance
J(±5%)
F(±1%)
J(±5%)
MCR006
MCR01
MCR03
MCR10
1005
(0402)
2012
(0805)
D(±0.5%)
J(±5%)
0.063W※1
(1/16W)
1608
(0603)
F(±1%)
F(±1%)
50
0.063W
(1/16W)
D(±0.5%)
0.1W※1
(1/10W)
J(±5%)
FX(±1%)
50
0.1W
(1/10W)
D(±0.5%)
J(±5%)
0.125W※1
(1/8W)
F(±1%)
150
0.1W
(1/10W)
D(±0.5%)
Temperature
coefficient
(ppm /℃)
+600/-200
±300
±250
±300
±250
+600/-200
±250
±250
±200
±100
+500/-250
±200
±100
±100
±50
±400
±200
±100
±100
±50
±400
±200
±100
±100
±50
Resistance range
1.0Ω to 9.1Ω (E24 Series)
10Ω to 91Ω (E24 Series)
100Ω to 3MΩ (E24 Series)
0Ω to 9.76Ω (E24,96 Series)
100Ω to 3MΩ (E24,96 Series)
1.0Ω to 9.1Ω (E24 Series)
10Ω to 10MΩ (E24 Series)
10Ω to 10MΩ (E24,96 Series)
10Ω to 976Ω (E24,96 Series)
1kΩ to 1MΩ (E24,96 Series)
1.0Ω to 9.1Ω (E24 Series)
10Ω to 10MΩ (E24 Series)
10Ω to 2.2MΩ (E24,96 Series)
10Ω to 97.6Ω (E24,96 Series)
100Ω to 1MΩ (E24,96 Series)
1.0Ω to 9.1Ω (E24 Series)
10Ω to 10MΩ (E24 Series)
10Ω to 10MΩ (E24,96 Series)
10Ω to 97.6Ω (E24,96 Series)
100Ω to 1MΩ (E24,96 Series)
1.0Ω to 9.1Ω (E24 Series)
10Ω to 10MΩ (E24 Series)
10Ω to 2.2MΩ (E24,96 Series)
10Ω to 97.6Ω (E24,96 Series)
100Ω to 1MΩ (E24,96 Series)
Operating
temperature range
(℃)
Automotive
Grade
Available
-55 to +125
―
Yes
Yes
-55 to +155
Yes
Yes
※1 : Please contact us for the higher rated power.
※E24 : Standard products E96 : Custom products
Jumper type
Part No.
MCR004
MCR006
MCR01
MCR03
MCR10
Size code
Rated current
mm(inch)
0402 (01005)
0.5A
0603 (0201)
0.5A
1005 (0402)
1A
1608 (0603)
1A
2012 (0805)
2A
Resistance
Temperature range(℃)
-55 to +125
Automotive Grade
Available
―
Yes
50mΩ Max.
Yes
-55 to +155
Yes
Yes
■Dimensions (Unit : mm)
D
Part No.
Size code
mm(inch)
L
W
t
a
b
MCR004
0402 (01005)
0.4 ± 0.02
0.2 ± 0.02
0.13 ± 0.02
0.1 ± 0.03
0.1 ± 0.03
MCR006
0603 (0201)
0.6 ± 0.03
0.3 ± 0.03
0.23 ± 0.03
0.1 ± 0.05
0.15 ± 0.05
MCR01
1005 (0402)
1.0 ± 0.05
0.5 ± 0.05
0.35 ± 0.05
0.2 ± 0.1
0.25
MCR03
1608 (0603)
1.6 ± 0.1
0.8 ± 0.1
0.45 ± 0.1
0.3 ± 0.2
0.3 ± 0.2
MCR10
2012 (0805)
2.0 ± 0.1
1.25 ± 0.1
0.55±0.1
0.4 ± 0.2
0.4 ± 0.2
●MCR004/006/01
●MCR03 (Partially marked)
L
L
Resistors
Part No.
103
W
W
t
t
b
b
■Part No. Explanation
Y Z P
a
a
a
+ 0.05
- 0.10
b
M C R 0 0 6
●MCR10
J
Tolerance
D
F
±0.5%
±1%
J
±5%
Nominal resistance
Resistance code, 3 or 4 digits.
000 denotes jumper type.
Tolerance
J is also used
for jumper
D, F
J
Resistance
code
:
4 digits
:
3 digits
Packaging specifications Code
Part No.
Code
MCR004
MCR006
MCR01
MCR03
MCR10
YZP
YLP
MZP
EZP
EZP
Tolerance
J(±5%)
◎
◎
◎
◎
◎
F(±1%) D(±0.5%)
◎
◎
◎
◎
◎
―
◎
◎
◎
◎
Basic ordering unit(pcs)
Packaging specifications
Reel
Paper tape(2mm Pitch)
Paper tape(2mm Pitch)
Paper tape(2mm Pitch)
Paper tape(4mm Pitch)
Paper tape(4mm Pitch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
15,000
15,000
10,000
5,000
5,000
Remarks
―
―
―
―
―
Reel (φ180mm) : Compatible with JEITA standard“EIAJ ET-7200B”
◎ : Standard product
D4
www.rohm.com
Passive Devices
Resistors
▶ Thick Film Chip Resistors (Standard series)
Thick Film Chip Resistors (Standard series)
Chip Resistors (MCR Series <1206 to 2512>)
MCR18
MCR25
MCR50
MCR100
MCR Series <1206 to 2512>
Part No.
MCR18
Temperature
coefficient
(ppm /℃)
±400
J(±5%)
±200
F(±1%)
±100
±100
D(±0.5%)
± 50
500±350
J(±5%)
±500
±200
F(±1%)
±100
500±350
±500
J(±5%)
±200
±350
F(±1%)
±100
500±350
±500
J(±5%)
±350
±200
F(±1%)
±100
Limiting
Size code Rated power
element voltage
(70℃)
mm(inch)
(V)
3216
(1206)
0.25W
(1/4W)
Tolerance
200
0.125W
(1/8W)
MCR25
3225
(1210)
0.25W
(1/4W)
200
MCR50
5025
(2010)
0.5W
(1/2W)
200
MCR100
6432
(2512)
1W
200
Operating
Automotive
temperature range
Grade
(℃)
Available
Resistance range
1.0Ω to 9.1Ω (E24 Series)
10Ω to 10MΩ (E24 Series)
10Ω to 2.2MΩ (E24,96 Series)
10Ω to 97.6Ω (E24,96 Series)
100Ω to 1MΩ (E24,96 Series)
1.0Ω to 2.0Ω (E24 Series)
2.2Ω to 5.1Ω (E24 Series)
5.6Ω to 3.3MΩ (E24 Series)
10Ω to 1.0MΩ (E24,96 Series)
1.0Ω to 2.0Ω (E24 Series)
2.2Ω to 9.1Ω (E24 Series)
10Ω to 330kΩ (E24 Series)
360kΩ to 560kΩ (E24 Series)
10Ω to 180kΩ (E24,96 Series)
1.0Ω to 2.0Ω (E24 Series)
2.2Ω to 9.1Ω (E24 Series)
10Ω to 22Ω (E24 Series)
24Ω to 100kΩ (E24 Series)
10Ω to 82kΩ (E24,96 Series)
Yes
-55 to +155
Yes
Yes
-55 to +125
Yes
※E24 : Standard products E96 : Custom products
Jumper type
Part No.
Size code
Rated current
mm(inch)
MCR18
3216 (1206)
2A
MCR25
3225 (1210)
2A
MCR50
5025 (2010)
3A
MCR100
6432 (2512)
4A
Resistance
Temperature range(℃)
Automotive Grade
Available
-55 to +155
Yes
Yes
50mΩ Max.
Yes
-55 to +125
Yes
■Dimensions (Unit : mm)
●MCR18/25/50/100
Size code
mm(inch)
L
W
t
a
b
MCR18
3216 (1206)
3.2±0.15
1.6±0.15
0.55±0.1
0.5±0.25
0.5±0.25
MCR25
3225 (1210)
3.2±0.15
2.5±0.15
0.55±0.15
0.5±0.25
0.5±0.25
MCR50
5025 (2010)
5.0±0.15
2.5±0.15
0.55±0.15
0.6±0.25
0.6±0.25
MCR100
6432 (2512)
6.3±0.15
3.2±0.15
0.55±0.15
0.6±0.25
0.6±0.25
Part No.
L
a
a
103
W
t
b
b
D
M C R 1 8
Part No.
E Z P
Tolerance
D
F
±0.5%
±1%
J
±5%
Resistors
■Part No. Explanation
J
Nominal resistance
Resistance code, 3 or 4 digits.
000 denotes jumper type.
Tolerance
J is also used
for jumper
D, F
J
:
:
Resistance
code
4 digits
3 digits
Packaging Specifications Code
Part No.
Code
MCR18
MCR25
MCR50
MCR100
EZP
Tolerance
J(±5%) F(±1%) D(±0.5%)
◎
◎
◎
Packaging specifications
Reel
Basic ordering unit(pcs)
Paper tape(4mm Pitch)
φ180mm (7inch)
5,000
JZH
◎
◎
―
Embossed tape(4mm Pitch)
φ180mm (7inch)
4,000
JZH
◎
◎
―
Embossed tape(4mm Pitch)
φ180mm (7inch)
4,000
JZH
◎
◎
―
Embossed tape(4mm Pitch)
φ180mm (7inch)
4,000
Reel (φ180mm) : Compatible with JEITA standard“EIAJ ET-7200B”
◎ : Standard product
www.rohm.com
D5
Passive Devices
Resistors
▶ Thick Film Chip Resistors (Standard series)
Thick Film Chip Resistors (Standard series)
Compact Chip Resistor Networks (MNR series <0402×2 to 1206×4>)
●
Reduces cost
Use of chip networks reduces the
number of components and saves
mounting space.
●
Easy fillet inspection
Convex type electrodes facilitate visual
inspection of fillets.
Inspection can be performed with
automatic inspection equipment.
MNR02
MNR12
MNR32
MNR04
MNR14
MNR34
MNR series <0402×2 to 1206×4>
Part No.
No. of
Size code No. of
mm(inch) terminals elements
MNR02
1005 (0402) ×2
4
2
Limiting
element voltage
(V)
0.063W / Element
25
MNR04
1005 (0402) ×4
8
4
0.063W / Element
Rated power
(70℃)
Tolerance
J(±5%)
25
J(±5%)
J(±5%)
F(±1%)
MNR12
1608 (0603) ×2
4
2
0.063W / Element
50
MNR14
1608 (0603) ×4
8
4
0.063W / Element
50
MNR32
MNR34
3216 (1206) ×2
3216 (1206) ×4
4
8
2
4
0.125W / Element
0.125W / Element
200
200
J(±5%)
F(±1%)
J(±5%)
J(±5%)
Temperature
coefficient
(ppm /℃)
±200
+500/-250
±200
±200
±100
±500
±200
±100
±200
±200
Operating
Automotive
temperature range
Grade
(℃)
Available
Yes
Resistance range
10Ω to 1MΩ(E24 Series)
1Ω to 9.1Ω(E24 Series)
10Ω to 1MΩ(E24 Series)
Yes
-55 to +155
10Ω to 1MΩ(E24 Series)
2.2Ω
10Ω
10Ω
10Ω
10Ω
to
to
to
to
to
6.8Ω(E6 Series)
1MΩ(E24 Series)
1MΩ(E24 Series)
1MΩ(E24 Series)
1MΩ(E24 Series)
Yes
Yes
Yes
Yes
-55 to +125
Jumper type
Part No.
Size code
Rated current
mm(inch)
Resistance
Temperature range
Automotive Grade
Available
MNR02
1005 (0402) ×2 1A / Element
Yes
MNR04
1005 (0402) ×4 1A / Element
Yes
MNR12
1608 (0603) ×2 1A / Element
MNR14
1608 (0603) ×4 1A / Element
MNR32
3216 (1206) ×2 2A / Element
MNR34
3216 (1206) ×4 2A / Element
-55 to +155℃
Yes
50mΩ Max.
Yes
Yes
-55 to +125℃
Yes
■Dimensions (Unit : mm)
●MNR02 / MNR12 / MNR32 (Marked except MNR02)
●MNR04 / MNR14 / MNR34 (Marked except MNR04)
Different marking system may apply to each product type.
Equivalent
Circuit Diagram
Different marking system may apply to each product type.
Part No.
D
L
MNR02 1.0±0.1
W
t
a
b2
Equivalent
Circuit Diagram
c
p
Part No.
+0.1
0.25±0.1 0.68
1.0±0.1 0.35±0.1 0.2±0.1 0.33 -0.05
Resistors
MNR12 1.6±0.1
1.6±0.1
MNR32 2.6±0.2
3.1±0.2 0.55±0.1 0.5±0.3
0.5±0.1
0.3±0.2 0.6±0.15 0.25±0.15 0.8
1.0±0.2
L
W
MNR04 2.0±0.1
0.5Max. 1.27
t
a
b1
1.0±0.1 0.35±0.1 0.2±0.1
0.3±0.1
MNR14 3.2±0.1
1.6±0.1
MNR34 5.2±0.4
3.1±0.2 0.55±0.1 0.5±0.3 0.8±0.2
0.5±0.1
b2
Part No.
1.0±0.2
J
Tolerance
F
J
Nominal resistance
±1%
±5%
Resistance code, 3 or 4 digits.
000 denotes jumper type.
J is also used
for jumper
Tolerance
F
J
Resistance
code
:
4 digits
:
3 digits
Packaging specifications Code
Part No.
Code
MNR02
MNR04
MNR12
MNR14
MNR32
MNR34
M0AP
M0AP
E0AP
E0AP
J0AB
J5AB
Tolerance
J(±5%) F(±1%)
◎
—
◎
—
◎
◎
◎
◎
◎
—
◎
—
Packaging specifications
Reel
Basic ordering unit(pcs)
Paper tape(2mm Pitch)
Paper tape(2mm Pitch)
Paper tape(4mm Pitch)
Paper tape(4mm Pitch)
Embossed tape(4mm Pitch)
Embossed tape(4mm Pitch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
10,000
10,000
5,000
5,000
4,000
4,000
Reel (φ180mm) : Compatible with JEITA standard "EIAJ ET-7200B"
◎ : Standard product
D6
www.rohm.com
p
0.3±0.2 0.4±0.15 0.6±0.15 0.25±0.15 0.8
■Part No. Explanation
M N R 0 2 M 0 A P
c
0.4±0.1 0.25±0.1 0.5
0.5Max. 1.27
Passive Devices
Resistors
▶ Thick Film Chip Resistors (Standard series)
Thick Film Chip Resistors (Standard series)
8-element Chip Resistor Networks (MNR series <0603×5 to 1206×5>)
●
●
●
●
●
One package built in 8-element chip contributes to space-saving
8 resistor elements reduce mounting cost
Convex type electrodes facilitate visual inspection of fillets.
Inspection can be performed with automatic inspection equipment.
Suitable for pull-up resistor, damping resistor
No direction to be mounted
MNR15
MNR18
MNR35
MNR series <0603×5 to 1206×5>
No. of
No. of
Size code
mm(inch) terminals elements
Part No.
Rated power
(70℃)
Limiting
element voltage
(V)
Tolerance
Temperature
coefficient
(ppm /℃)
Resistance range
Operating
Automotive
temperature range
Grade
(℃)
Available
MNR15
1608 (0603) ×5
10
8
0.031W / Element
12.5
J(±5%)
±200
56Ω to 100kΩ(E24 Series)
MNR18
1605 (0602) ×8
16
8
0.063W / Element
25
J(±5%)
±200
10Ω to
MNR35
3216 (1206) ×5
10
8
0.063W / Element
50
J(±5%)
±200
56Ω to 100kΩ(E12 Series)
1MΩ(E24 Series)
Yes
-55 to +125
Yes
Yes
Jumper type
Size code
Rated current
mm(inch)
Resistance
Temperature range
Automotive Grade
Available
MNR18 1605 (0602)×8 1A / Element
50mΩ Max.
-50 to +125℃
Yes
Part No.
■Dimensions (Unit : mm)
●MNR18
●MNR15
Equivalent
Circuit Diagram
0.48±0.15
0.32±0.15
0.32±0.15
Equivalent
Circuit Diagram
(0.2)
0.3±0.1
0.3±0.1
0.3±0.2
0.3±0.2
1.6±0.1
3.8±0.1
(0.5)
0.3±0.1
0.5±0.1
101
0.3±0.1
1.6±0.1
0.64
0.45±0.1
3.2±0.1
R103
1.27
6.4±0.4
3.1±0.2
0.8±0.2 0.5±0.2
0.55±0.1
1.0±0.2
0.5±0.3
●MNR35
0.5Max.
*( ) : Reference Value
Equivalent
Circuit Diagram
10
6
1
5
D
Resistors
■Part No. Explanation
M N R 1 5
Part No.
E 0 R P
J
Tolerance
J
±5%
J is also used
for jumper
Nominal resistance
Resistance code,3 digits,
000 denotes Jumper type.
Packaging specifications Code
Part No.
Code
Tolerance
J(±5%)
Packaging specifications
Reel
MNR15
E0RP
◎
Paper tape(4mm Pitch)
φ180mm (7inch)
5,000
MNR18
E0AP
◎
Paper tape(4mm Pitch)
φ180mm (7inch)
5,000
MNR35
J5R
◎
Embossed tape(4mm Pitch)
φ180mm (7inch)
4,000
Basic ordering unit(pcs)
Reel (φ180mm) : Compatible with JEITA standard "EIAJ ET-7200B"
◎ : Standard product
www.rohm.com
D7
Passive Devices
Resistors
▶ Thick Film Chip Resistors (High reliability series)
Thick Film Chip Resistors (High reliability series)
High Anti-surge Chip Resistors (SDR series)
Anti-surge Chip Resistors (ESR series)
Exclusive resistive element pattern and laser
trimming technology results in significantly
improved surge resistance characteristics.
● Superior power ratings.
●
SDR03
ESR01
ESR03
ESR10
ESR18
ESR25
SDR series
Part No.
D(±0.5%)
Temperature
coefficient
(ppm /℃)
±200
±200
±100
±100
J(±5%)
+500 / -250
±200 F(±1%)
±100
J(±5%)
D(±0.5%)
±200
±200
±100
±100
J(±5%)
±200
1Ω to 30MΩ(E24 Series)
F(±1%)
±100
1Ω to 10MΩ(E24, 96 Series)
D(±0.5%)
±100
Limiting
Size code Rated power
element voltage
mm(inch)
(70℃)
(V)
Tolerance
J(±5%)
1608
(0603)
0.3W
ESR01
1005
(0402)
0.2W
(1/5W)
50
ESR03
1608
(0603)
0.25W
(1/4W)
150
2012
(0805)
0.4W
(2/5W)
150
0.33W
(1/3W)
200
SDR03
F(±1%)
150
ESR series
ESR10
ESR18
3216
(1206)
☆0.5W
(1/2W)
200
0.5W
(1/2W)
ESR25
3225
(1210)
F(±1%)
200
☆0.66W
(2/3W)
200
Operating
Automotive
temperature range
Grade
(℃)
Available
Resistance range
1Ω to 10MΩ(E24 Series)
1Ω to 9.76Ω(E24, 96 Series)
1Ω to 10MΩ(E24, 96 Series)
10Ω to 1MΩ(E24, 96 Series)
10Ω to
±200
1Ω to 15MΩ(E24 Series)
±100
1Ω to 10MΩ(E24, 96 Series)
D(±0.5%)
±100
J(±5%)
±200
±100
±100
J(±5%)
±200
F(±1%)
±100
D(±0.5%)
±100
J(±5%)
±200
F(±1%)
D(±0.5%)
±100
±100
10Ω to
SDR03
D
Size code
mm(inch)
L
1608 (0603)
1.6±0.1
Yes
Yes
-55 to +155
1MΩ(E24, 96 Series)
Yes
1Ω to 15MΩ(E24 Series)
1Ω to 10MΩ(E24, 96 Series)
10Ω to
1MΩ(E24, 96 Series)
1Ω to 10MΩ(E24 Series)
1Ω to 10MΩ(E24, 96 Series)
10Ω to
1MΩ(E24, 96 Series)
Yes
1Ω to 10MΩ(E24 Series)
1Ω to 10MΩ(E24, 96 Series)
10Ω to 1MΩ(E24, 96 Series)
※E24 : Standard products E96 : Custom products
☆ : Under Development
■Dimensions (Unit : mm)
Part No.
Yes
1MΩ(E24, 96 Series)
J(±5%)
F(±1%)
Yes
1Ω to 9.1Ω(E24Series)
10Ω to 10MΩ(E24Series)
10Ω to 976kΩ(E24, 96 Series)
1MΩ to 2.2MΩ(E24 Series)
1Ω to 10MΩ(E24 Series)
1Ω to 9.76Ω(E24, 96 Series)
10Ω to 10MΩ(E24, 96 Series)
10Ω to 1MΩ(E24, 96 Series)
F(±1%)
D(±0.5%)
-55 to +155
W
0.8±0.1
t
0.45±0.1
a
b
0.25±0.1
0.25±0.1
Resistors
ESR01
1005 (0402)
1.0±0.05
0.5±0.05 0.35±0.05
0.2±0.1
0.25+0.05
-0.1
ESR03
1608 (0603)
1.6±0.1
0.8±0.1
0.3±0.2
0.3±0.2
ESR10
2012 (0805)
2.0±0.1
1.25±0.1
0.55±0.1
0.3±0.2
0.4±0.2
ESR18
3216 (1206)
3.2±0.15
1.6±0.15
0.55±0.1
0.3±0.25
0.5±0.25
ESR25
3225 (1210)
3.2±0.15
2.5±0.15
0.55±0.1
0.3±0.25
0.5±0.25
0.45±0.1
●ESR01/03
●SDR03
●ESR10/18/25
L
L
L
a
a
a
a
SD
103
W
W
t
t
t
b
b
b
■Part No. Explanation
E S R 1 0
Part No.
E Z P
J
Tolerance
D
F
J
±0.5%
±1%
±5%
Nominal resistance
Resistance code, 3 or 4 digits.
Tolerance
F, D
J
:
:
Resistance
code
4 digits
3 digits
Packaging specifications Code
Part No.
Code
SDR03
ESR01
ESR03
ESR10
ESR18
ESR25
EZP
MZP
EZP
EZP
EZP
JZP
Tolerance
J(±5%) F(±1%) D(±0.5%)
◎
◎
◎
◎
◎
─
◎
◎
◎
◎
◎
◎
◎
◎
◎
◎
◎
◎
Packaging specifications
Reel
Basic ordering unit(pcs)
Paper tape(4mm Pitch)
Paper tape(4mm Pitch)
Paper tape(4mm Pitch)
Paper tape(4mm Pitch)
Paper tape(4mm Pitch)
Embossed tape(4mm Pitch)
φ180mm
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
5,000
10,000
5,000
5,000
5,000
4,000
Reel (φ180mm) : Compatible with JEITA standard "EIAJ ET-7200B"
◎ : Standard product
D8
www.rohm.com
W
b
Passive Devices
Resistors
▶ Thick Film Chip Resistors (High reliability series)
Thick Film Chip Resistors (High reliability series)
High Power Chip Resistors <Wide Terminal type> (LTR series)
●
●
●
High joint reliability with long side terminations.
Highest power ratings in their class.
Guaranteed anti-surge characteristic in all series.
LTR10
LTR18
LTR50
LTR100
LTR series
Part No.
LTR10
LTR18
LTR50
LTR100
Limiting
Size code Rated power
element voltage
(70℃)
mm(inch)
(V)
1220
(0508)
0.25W
(1/4W)
150
1632
(0612)
0.75W
(3/4W)
200
2550
(1020)
1W
3264
(1225)
2W
Tolerance
200
200
Temperature
coefficient
(ppm / ℃ )
Operating
Automotive
temperature range
Grade
(℃)
Available
Resistance range
J(±5%)
±200
1Ω to 1MΩ(E24 Series)
F(±1%)
±100
1Ω to 1MΩ(E24, 96 Series)
D(±0.5%)
±100
10Ω to 1MΩ(E24, 96 Series)
J(±5%)
±200
F(±1%)
±100
1Ω to 1MΩ(E24, 96 Series)
D(±0.5%)
±100
10Ω to 1MΩ(E24, 96 Series)
J(±5%)
±200
Yes
1Ω to 1MΩ(E24 Series)
1Ω to 1MΩ(E24 Series)
F(±1%)
±100
1Ω to 1MΩ(E24, 96 Series)
D(±0.5%)
±100
10Ω to 1MΩ(E24, 96 Series)
J(±5%)
±200
1Ω to 1MΩ(E24 Series)
F(±1%)
±100
1Ω to 1MΩ(E24, 96 Series)
D(±0.5%)
±100
10Ω to 1MΩ(E24, 96 Series)
Yes
-55 to +155
Yes
Yes
※E24 : Standard products E96 : Custom products
■Dimensions (Unit : mm)
●LTR10/18/50
Part No.
Size code
mm(inch)
L
W
t
LTR10
1220 (0508)
1.2±0.1
2.0±0.1
0.55±0.1
0.25±0.1
0.35±0.2
LTR18
1632 (0612)
1.6±0.15
3.2±0.15
0.55±0.1
0.3±0.2
0.5±0.2
LTR50
2550 (1020)
2.5±0.15
5.0±0.15
0.55±0.1
0.38±0.2
0.9±0.2
LTR100
3264 (1225)
3.2±0.15
6.4±0.15
0.55±0.15
a
0.4±0.25
b
●LTR100(No marking)
t
W
a
a
b
L
L
b
a
t
W
b
b
a
1.13±0.25
■Part No. Explanation
L T R 1 8
E Z P
Tolerance
D
F
J
D
Nominal resistance
±0.5%
±1%
±5%
Resistors
Part No.
J
Resistance code, 3 or 4 digits.
Tolerance
F, D
J
Resistance
code
:
4 digits
:
3 digits
Packaging specifications Code
Tolerance
J(±5%) F(±1%) D(±0.5%)
Basic ordering unit(pcs)
Part No.
Code
Packaging specifications
Reel
LTR10
EZP
◎
◎
◎
Paper tape(4mm Pitch)
φ180mm (7inch)
5,000
LTR18
EZP
◎
◎
◎
Paper tape(4mm Pitch)
φ180mm (7inch)
5,000
LTR50
UZP
◎
◎
◎
Embossed tape(4mm Pitch)
φ180mm (7inch)
5,000
LTR100
JZP
◎
◎
◎
Embossed tape(4mm Pitch)
φ180mm (7inch)
4,000
Reel (φ180mm) : Compatible with JEITA standard "EIAJ ET-7200B"
◎ : Standard product
www.rohm.com
D9
Passive Devices
Resistors
▶ Thick Film Chip Resistors (High reliability series)
Thick Film Chip Resistors (High reliability series)
High Voltage Resistance Chip Resistors (KTR series)
●
●
Twice the rated voltage of conventional
products.
Perfect for use in Camera Flash circuit, etc.
KTR03
KTR10
KTR18
KTR25
KTR series
Part No.
Limiting
Size code Rated power
element voltage
mm(inch)
(70℃)
(V)
KTR03
1608
(0603)
0.1W
(1/10W)
350
KTR10
2012
(0805)
0.125W
(1/8W)
400
KTR18
3216
(1206)
0.25W
(1/4W)
500
KTR25
3225
(1210)
0.33W
(1/3W)
600
Tolerance
Temperature
coefficient
(ppm /℃)
J (±5%)
±200
1Ω to 10MΩ (E24 Series)
F (±1%)
±100
1Ω to 10MΩ (E24, 96 Series)
Operating
Automotive
temperature range
Grade
(℃)
Available
Resistance range
J (±5%)
±200
1Ω to 30MΩ (E24 Series)
F (±1%)
±100
1Ω to 10MΩ (E24, 96 Series)
J (±5%)
±200
1Ω to 15MΩ (E24 Series)
F (±1%)
±100
1Ω to 10MΩ (E24, 96 Series)
J (±5%)
±200
1Ω to 10MΩ (E24 Series)
F (±1%)
±100
1Ω to 10MΩ (E24, 96 Series)
Yes
Yes
-55 to +155
Yes
Yes
※E24 : Standard products E96 : Custom products
■Dimensions (Unit : mm)
●KTR03
Size code
mm(inch)
L
KTR03
1608 (0603)
1.6±0.1
0.8±0.1
0.45±0.1
KTR10
2012 (0805)
2.0±0.1
1.25±0.1
0.55±0.1
0.3±0.2
0.4±0.2
KTR18
3216 (1206)
3.2±0.15
1.6±0.15
0.55±0.1
0.3±0.25
0.5±0.25
KTR25
3225 (1210)
3.2±0.15
2.5±0.15
0.55±0.1
0.3±0.25
0.5±0.25
Part No.
W
t
a
b
●KTR10/18/25
L
L
0.3±0.2
0.3±0.2
103
W
t
b
■Part No. Explanation
K T R 1 0
Resistors
Part No.
E Z P
J
Tolerance
F
J
±1%
±5%
Nominal resistance
Resistance code, 3 or 4 digits.
Tolerance
F
J
Resistance
code
:
4 digits
:
3 digits
Packaging specifications Code
Part No.
Code
KTR03
KTR10
KTR18
KTR25
EZP
EZP
EZP
JZP
Tolerance
J(±5%) F(±1%)
◎
◎
◎
◎
◎
◎
◎
◎
Packaging specifications
Reel
Basic ordering unit(pcs)
Paper tape(4mm Pitch)
Paper tape(4mm Pitch)
Paper tape(4mm Pitch)
Embossed tape(4mm Pitch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
5,000
5,000
5,000
4,000
Reel (φ180mm) : Compatible with JEITA standard "EIAJ ET-7200B"
◎ : Standard product
D10
W
t
b
D
a
a
a
www.rohm.com
b
Passive Devices
Resistors
▶ Thick Film Chip Resistors (High reliability series)
Thick Film Chip Resistors (High reliability series)
Tolerance for sulfurization chip resistor (SFR series)
●
Improved Anti-sulfur reliability by ROHM original structure.
SFR01
SFR03
SFR series
Part No.
Temperature
coefficient
(ppm / ℃ )
Resistance range
J(±5%)
+500 / -250
±200
1Ω to 9.1Ω(E24 Series)
10Ω to 10MΩ(E24 Series)
F(±1%)
±100
10Ω to 2.2MΩ(E24,96 Series)
J(±5%)
±400
±200
1Ω to 9.1Ω(E24 Series)
10Ω to 10MΩ(E24 Series)
F(±1%)
±100
10Ω to 10MΩ(E24,96 Series)
Limiting
Size code Rated power
element voltage
(70℃)
mm(inch)
(V)
SFR01
1005
(0402)
0.063W
(1/16W)
50
SFR03
1608
(0603)
0.1W
(1/10W)
50
Tolerance
Operating
Automotive
temperature range
Grade
(℃)
Available
Yes
-55 to +155
Yes
※E24 : Standard products E96 : Custom products
■Dimensions (Unit : mm)
Size code
mm(inch)
L
SFR01
1005 (0402)
1.0±0.05
0.5±0.05
0.35±0.05 0.33±0.08
SFR03
1608 (0603)
1.6±0.1
0.8±0.1
0.45±0.1
Part No.
W
t
a
0.4±0.1
●SFR01/03
b
L
+0.05
0.25
-0.10
0.3±0.2
a
W
t
b
■Part No. Explanation
S F R 0 3
Part No.
E Z P
Tolerance
F
J
J
Nominal resistance
±1%
±5%
Resistance code, 3 or 4 digits.
Tolerance
D
Resistors
F
J
Resistance
code
:
4 digits
:
3 digits
Packaging specifications Code
Tolerance
J(±5%) F(±1%)
Part No.
Code
SFR01
MZP
◎
◎
SFR03
EZP
◎
◎
Reel
Basic ordering unit(pcs)
Paper tape(2mm Pitch)
φ180mm (7inch)
10,000
Paper tape(4mm Pitch)
φ180mm (7inch)
5,000
Packaging specifications
Reel (φ180mm) : Compatible with JEITA standard "EIAJ ET-7200B"
◎ : Standard product
www.rohm.com
D11
Passive Devices
Resistors
▶ Chip Resistors for Current Detection (Thick Film type)
Chip Resistors for Current Detection (Thick Film type)
Chip Resistors (Low Ohmic MCR series)
●
●
Very-low ohmic resistance from
47m Ohm is in lineup by thick-film
resistive element.
High-reliability chip resistor employing
metal glaze as resistive element.
MCR006
MCR01
MCR03
MCR10
MCR18
MCR25
MCR50
MCR100
Low Ohmic MCR series
Operating
temperature range
(℃)
Automotive
Grade
Available
Size code
mm(inch)
Rated power
(70℃)
Tolerance
Temperature
coefficient
(ppm /℃)
☆MCR006
0603
(0201)
0.05W
(1/20W)
F (±1%)
+600 /-200
1.0Ω to
9.1Ω (E24 Series)
Yes
MCR01
1005
(0402)
0.063W
(1/16W)
F (±1%)
±400
1.0Ω to
9.1Ω (E24 Series)
Yes
MCR03
1608
(0603)
0.1W
(1/10W)
F (±1%)
±400
1.0Ω to
9.1Ω (E24 Series)
Yes
MCR10
2012
(0805)
0.25W
(1/4W)
MCR18
3216
(1206)
0.25W
(1/4W)
J (±5%)
F (±1%)
J (±5%)
F (±1%)
MCR25
3225
(1210)
0.5W
(1/2W)
MCR50
5025
(2010)
0.5W
(1/2W)
MCR100
6432
(2512)
1W
*Table 1
*Table 1
*Table 1
*Table 1
300±300
±200
300±300
±200
*Table 1
*Table 1
*Table 1
*Table 1
Part No.
J (±5%)
F (±1%)
J (±5%)
F (±1%)
J (±5%)
F (±1%)
Resistance range
0.047Ω to
0.047Ω to
0.047Ω to
0.047Ω to
0.047Ω to
0.1Ω to
0.047Ω to
0.1Ω to
0.047Ω to
0.047Ω to
0.047Ω to
0.047Ω to
0.91Ω
9.1Ω
0.91Ω
9.1Ω
0.091Ω
0.91Ω
0.091Ω
9.1Ω
0.91Ω
9.1Ω
0.91Ω
9.1Ω
(E24 Series)
(E24 Series)
(E24 Series)
(E24 Series)
(E24 Series)
(E24 Series)
(E24 Series)
(E24 Series)
(E24 Series)
(E24 Series)
(E24 Series)
(E24 Series)
Yes
-55 to +155
Yes
Yes
Yes
-55 to +125
Yes
☆ : Under Development
*Table 1
Tolerance
J (±5%)
F (±1%)
Temperature coefficient
(ppm /℃)
500±300
400±200
±250
Resistance range
0.047Ω to 0.091Ω (E24 Series)
0.1Ω to 0.13Ω (E24 Series)
0.15Ω to
9.1Ω (E24 Series)
■Dimensions (Unit : mm)
D
Part No.
Size code
mm(inch)
MCR006
0603 (0201) 0.6±0.03
L
●MCR006/01 ●MCR03 ●MCR10/18/25/50/100
W
t
a
b
0.3±0.03
0.23±0.03
0.1±0.05
0.15±0.05
0.35±0.05
0.2±0.1
0.25 +0.05
-0.1
MCR01
1005 (0402)
MCR03
1608 (0603)
1.6±0.1
0.8±0.1
0.45±0.1
0.3±0.2
0.3±0.2
MCR10
2012 (0805)
2.0±0.1
1.25±0.1
0.55±0.1
0.4±0.2
0.4±0.2
MCR18
3216 (1206)
3.2±0.15
1.6±0.15
0.55±0.1
0.5±0.25
0.5±0.25
MCR25
3225 (1210)
3.2±0.15
2.5±0.15
0.55±0.15
0.5±0.25
0.5±0.25
MCR50
MCR100
5025 (2010)
6432 (2512)
5.0±0.15
6.3±0.15
2.5±0.15
3.2±0.15
0.55±0.15
0.55±0.15
0.6±0.25
0.6±0.25
0.6±0.25
0.6±0.25
1.0±0.05
0.5±0.05
L
L
a
L
W
1R0
Resistors
Part No.
E Z H J
Tolerance
F
J
±1%
±5%
b
L
Special part code Nominal resistance
L
0.1 to 9.1Ω(F)
0.1 to 0.91Ω(J)
S
0.047 to 0.091Ω
MCR006
MCR01
MCR03
MCR10
MCR18
MCR25
MCR50
MCR100
YLP
MZP
EZP
EZH
EZH
JZH
JZH
JZH
Tolerance
J(±5%) F(±1%)
—
◎
—
◎
—
◎
◎
◎
◎
◎
◎
◎
◎
◎
◎
◎
Packaging specifications
Reel
Paper tape(2mm Pitch)
Paper tape(2mm Pitch)
Paper tape(4mm Pitch)
Paper tape(4mm Pitch)
Paper tape(4mm Pitch)
Embossed tape(4mm Pitch)
Embossed tape(4mm Pitch)
Embossed tape(4mm Pitch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
Resistance code, 3 or 4 digits.
Tolerance
+Special P/N
Resistance
code
:
:
4 digits
3 digits
Basic ordering unit(pcs)
15,000
10,000
5,000
5,000
5,000
4,000
4,000
4,000
Reel (φ180mm) : Compatible with JEITA standard "EIAJ ET-7200B"
◎ : Standard product
D12
www.rohm.com
t
b
Packaging specifications Code
Code
W
t
b
FL, FS, JS
JL
Part No.
R22
W
t
■Part No. Explanation
M C R 1 0
a
a
a
b
Passive Devices
Resistors
▶ Chip Resistors for Current Detection (Thick Film type)
Chip Resistors for Current Detection (Thick Film type)
Low Ohmic Chip Resistors <Face down type> (UCR series)
●
●
●
Chip resistors for current detection. (11mΩ-)
Resistive element is located at bottom side, which
reduces the resistance shift during mounting
process.
ROHM’
s unique structure achieved improvement
of heat.
UCR006
UCR01
UCR03
UCR10
UCR18
UCR series
Size code
mm(inch)
Rated power
(70℃)
Tolerance
UCR006
0603
(0201)
0.1W
(1/10W)
F (±1%)
UCR01
1005
(0402)
0.125W
(1/8W)
F (±1%)
Part No.
J (±5%)
F (±1%)
J (±5%)
F (±1%)
J (±5%)
0.33W
(1/3W)
F (±1%)
J (±5%)
0.5W
(1/2W)
3216
(1206)
UCR18
J (±5%)
0.2W
(1/5W)
2012
(0805)
UCR10
J (±5%)
0.25W
(1/4W)
1608
(0603)
UCR03
Temperature
coefficient
(ppm /℃)
F (±1%)
J (±5%)
☆1.0W
F (±1%)
Operating
temperature range
(℃)
Resistance range
Automotive
Grade
Available
0 to 300
100mΩ to 910mΩ(E24 Series)
Yes
0 to 300
0 to 250
0 to 200
68mΩ to 91mΩ(E24 Series)
100mΩ to 200mΩ(E24 Series)
220mΩ to 910mΩ(E24 Series)
Yes
0 to 250
0 to 200
0 to 150
20mΩ to 47mΩ(E24 Series)
51mΩ to 91mΩ(E24 Series)
100mΩ to 200mΩ(E24 Series)
0 to 150
220mΩ to 910mΩ(E24 Series)
250±200
0 to 250
0 to 150
0 to 250
0 to 150
0 to 350
0 to 200
0 to 150
11mΩ to 18mΩ(E24 Series)
20mΩ to 47mΩ(E24 Series)
51mΩ to 100mΩ(E24 Series)
11mΩ to 47mΩ(E24 Series)
51mΩ to 100mΩ(E24 Series)
11mΩ to 18mΩ(E24 Series)
20mΩ to 39mΩ(E24 Series)
43mΩ to 100mΩ(E24 Series)
0 to 350
0 to 200
11mΩ to 18mΩ(E24 Series)
20mΩ to 39mΩ(E24 Series)
Yes*1
-55 to +155
Yes
Yes
Yes
*1 Limited to 100mΩ and higher.
☆ : Under Development
■Dimensions (Unit : mm)
Part No.
Size code
mm(inch)
L
●UCR006/01
●UCR03
W
t
a
b
UCR006
0603 (0201) 0.64±0.05
0.34±0.05
0.28±0.05
0.16±0.1
0.22±0.1
UCR01
1005 (0402)
0.55±0.1
0.37±0.05
0.28±0.1
0.34±0.1
1.0±0.1
UCR03
1608 (0603)
1.6±0.1
0.87±0.1
0.5±0.1
0.45±0.2
0.45±0.2
UCR10
2012 (0805)
2.0±0.1
1.25±0.1
0.55±0.1
0.24±0.2
0.5±0.2
UCR18
3216 (1206)
3.2±0.15
0.55±0.1
0.3±0.2
0.9±0.25
1.6±0.15
●UCR03
●UCR10/18
(20mΩ≦R<50mΩ)
(50mΩ≦R≦910mΩ)
L
(Top)
a
(Top)
a
a
W
b
b
t
(Bottom)
b
b
b
Tolerance
F
J
±1%
±5%
W
t
t
b
b
(Bottom)
b
b
b
b
S
Special part code Nominal resistance
S
L
11mΩ to 91mΩ
100mΩ to
Resistance code, 3 or 4 digits.
Tolerance
+Special P/N
Resistance
code
FS, FL, JS :
JL
:
4 digits
3 digits
Packaging specifications Code
Part No.
Code
UCR006
UCR01
YVP
MVP
EWP
EVP
EVH
EVH
UCR03
UCR10
UCR18
Tolerance
J(±5%) F(±1%)
◎
◎
◎
◎
◎
◎
◎
◎
◎
◎
◎
◎
Packaging specifications
Reel
Basic ordering unit(pcs)
Paper tape(2mm Pitch)
Paper tape(2mm Pitch)
Paper tape(4mm Pitch)
Paper tape(4mm Pitch)
Paper tape(4mm Pitch)
Paper tape(4mm Pitch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
15,000
10,000
5,000
5,000
5,000
5,000
Remarks
─
─
20mΩ to 47mΩ
51mΩ to 910mΩ
─
─
Reel (φ180mm) : Compatible with JEITA standard "EIAJ ET-7200B"E
◎ : Standard product
www.rohm.com
D
Resistors
Part No.
E V H F
a
R022
■Part No. Explanation
U C R 1 0
L
a
W
(Bottom)
b
(Top)
L
a
D13
Passive Devices
Resistors
▶ Chip Resistors for Current Detection (Thick Film type)
Chip Resistors for Current Detection (Thick Film type)
High Power Chip Resistors <Wide Terminal type> (Low Ohmic LTR series)
●
●
●
Chip resistors for current detection. (10mΩ-)
High joint reliability with long side terminations.
Improvement of rated power enables to displace
smaller size of resistors, and it contributes space
savings in your set.
LTR10
LTR18
LTR100
Low Ohmic LTR series
Size code
mm(inch)
Rated power
(70℃)
LTR10
1220
(0508)
0.5W
(1/2W)
LTR18
1632
(0612)
1W
LTR100
3264
(1225)
2W
Part No.
Temperature
coefficient
(ppm /℃)
Tolerance
J(±5%)
±150
F(±1%)
47mΩ to
F(±1%)
9.1Ω(E24 Series)
J(±5%)
±200
100mΩ to 910mΩ(E24 Series)
F(±1%)
0 to 150
100mΩ to 910mΩ(E24 Series)
Automotive
Grade
Available
Yes
10mΩ to 18mΩ(E24 Series)
20mΩ to 47mΩ(E24 Series)
51mΩ to 470mΩ(E24 Series)
510mΩ to
1Ω(E24 Series)
0 to 300
0 to 200
0 to 150
±100
J(±5%)
Operating
temperature range
(℃)
Resistance range
-55 to +155
Yes
Yes
■Dimensions (Unit : mm)
●LTR10
Part No.
Size code
mm(inch)
L
LTR10
1220 (0508)
1.2±0.1
2.0±0.1
0.55±0.1
0.3±0.2
0.35±0.2
LTR18
1632 (0612)
1.6±0.1
3.2±0.1
0.58±0.1
0.5±0.2
0.5±0.2
LTR100
3264 (1225)
3.2±0.15
6.4±0.15
0.55±0.15
0.4±0.25
1.13±0.25
W
t
a
b
●LTR18/100(No marking)
(Top)
(Top)
t
W
b
a
b
L
L
b
a
(Bottom)
b
a
(Bottom)
b
b
b
b
■Part No. Explanation
D
L T R 1 0
Resistors
Part No.
E V H J
Tolerance
F
J
±1%
±5%
S
Special part code Nominal resistance
U
10mΩ
S
11mΩ to 91mΩ
L
100mΩ to
Resistance code, 3 or 4 digits.
Tolerance
+
Special part
number
FU, FS, FL, JS :
JU, JL
:
Resistance
code
4 digits
3 digits
Packaging specifications Code
Part No.
Code
LTR10
LTR18
LTR100
EVH
EZP
JZP
Tolerance
J(±5%) F(±1%)
◎
◎
◎
◎
◎
◎
Packaging specifications
Reel
Basic ordering unit(pcs)
Paper tape(4mm Pitch)
Paper tape(4mm Pitch)
Embossed tape(4mm Pitch)
φ180mm (7inch)
φ180mm (7inch)
φ180mm (7inch)
5,000
5,000
4,000
Reel (φ180mm) : Compatible with JEITA standard "EIAJ ET-7200B"
◎ : Standard product
D14
www.rohm.com
t
W
a
Passive Devices
Resistors
▶ Chip Resistors for Current Detection (Metal plate type)
Chip Resistors for Current Detection (Metal plate type)
Ultra Low Ohmic Chip Shunt Resistors (PMR series)
●
●
Ultra low-ohmic resistance range (1mΩ-)
Improved current detection accuracy by
trimming-less structure.
Highly recommended for large current /
High speed switching circuit.
●
Special low resistance temperature coefficient
(TCR) alloy utilized for the resistive element.
PMR01
PMR03
PMR10
PMR18
PMR25
PMR50
PMR100
PMR series
Size code
mm(inch)
Part No.
PMR01
1005 (0402)
PMR03
1608 (0603)
Rated power
(70℃)
0.2W
(1/5W)
0.25W
(1/4W)
0.5W
(1/2W)
PMR10
2012 (0805)
PMR18
3216 (1206)
1W
PMR25
3225 (1210)
1W
PMR50
5025 (2010)
1W
PMR100
☆3W
Automotive
Grade
Available
Temperature
coefficient
(ppm /℃)
J(±5%)
0 to 200
10
Yes
0 to 150
10(☆5)
Yes
±150
2,3,4,5,6,
7,8,9,10
1,2,3,4,5,6,
7,8,9,10
J(±5%)
F(±1%)
J(±5%)
F(±1%)
J(±5%)
F(±1%)
J(±5%)
F(±1%)
J(±5%)
F(±1%)
J(±5%)
F(±1%)
J(±5%)
F(±1%)
2W
6432 (2512)
Operating
temperature range
(℃)
Tolerance
Resistance value
(mΩ)
±100
±100
1,2,3,4,5
±100
±150
±100
1,2,2.5,3,4,5,
6,7,8,9,10
1,2
3,4,5,6,7,8,9,10
±150
1,2
Yes
Yes
-55 to +155
Yes
Yes
Yes
☆ : Under Development
Large current jumper type
Part No.
PMR01
PMR03
PMR10
PMR18
PMR25
PMR50
PMR100
Automotive Grade
Size code
Rated current Resistance Temperature range (℃ )
Available
mm(inch)
1005 (0402)
20.0A
Yes
1608 (0603)
22.4A
Yes
2012 (0805)
31.6A
Yes
0.5mΩ Max.
-55 to +155
3216 (1206)
38.7A
Yes
3225 (1210)
44.7A
Yes
5025 (2010)
50.0A
Yes
6432 (2512)
63.2A
Yes
■Dimensions (Unit : mm)
Part No.
PMR01
PMR03
PMR10
PMR18
PMR25
PMR50
PMR100
Size code
mm(inch)
L
W
t
a
b
c
●PMR01/03(No marking)
●PMR10/18
1005 (0402)
1.0±0.05
0.5±0.05
0.25±0.1
—
0.30±0.10
—
1608 (0603)
1.6±0.15
0.8±0.15
0.25±0.1
—
0.35±0.15
—
2012 (0805)
2.0±0.15
1.2±0.15
0.42 to 0.28*±0.15
—
0.75 to 0.35*±0.25
—
3216 (1206)
3.2±0.15
1.6±0.15
0.42 to 0.28*±0.15
—
1.20 to 0.5 *±0.25
—
3225 (1210)
3.2±0.2
2.5±0.2
0.52 to 0.32*±0.15
0.5±0.2
1.00 to 0.8 *±0.2
5025 (2010)
6432 (2512)
5.0±0.2
6.4±0.25
2.5±0.2
3.2±0.25
0.52 to 0.32*±0.15
0.52 to 0.32*±0.15
0.5±0.2
0.5±0.25
1.85 to 0.9 *±0.2 1.95±0.2
2.3 to 1.1 *±0.25 2.65±0.25
●PMR25/50/100
L
(Top)
(Top)
2L00
w
a
1.95±0.2
(Bottom)
* Each value range varies with the resistance. Please contact a ROHM sales representative for further details.
t
b
(Bottom)
c
Resistors
■Part No. Explanation
P M R 2 5
Part No.
H Z P
Tolerance
F
J
±1%
±5%
J
V
Special part code
U
V
5 to 10mΩ
1 to 4mΩ
*Jumper type doesn't have a special part code
Packaging specifications Code
Part No.
Code
PMR01
PMR03
PMR10
PMR18
PMR25
PMR50
PMR100
ZZP
EZP
EZP
EZP
HZP
HZP
HZP
Tolerance
J(±5%) F(±1%)
◎
—
◎
◎
◎
◎
◎
◎
◎
◎
◎
◎
◎
◎
Packaging specifications
Reel
Embossed tape(2mm Pitch)φ180mm (7inch)
Paper tape(4mm Pitch) φ180mm (7inch)
Paper tape(4mm Pitch) φ180mm (7inch)
Paper tape(4mm Pitch) φ180mm (7inch)
Embossed tape(4mm Pitch)φ180mm (7inch)
Embossed tape(4mm Pitch)φ180mm (7inch)
Embossed tape(4mm Pitch)φ180mm (7inch)
Basic ordering unit
(pcs)
10,000
5,000
5,000
5,000
2,000
2,000
2,000
Reel (φ180mm) : Compatible with JEITA standard "EIAJ ET-7200B"
◎ : Standard product
www.rohm.com
D
Nominal resistance
Resistance code, 3 or 4 digits.
Tolerance
F
J
Resistance
Value (Ω)
Jumper
1mΩ
2mΩ
3mΩ
4mΩ
5mΩ
6mΩ
7mΩ
8mΩ
9mΩ
10mΩ
Resistance
code
:
4 digits
:
3 digits
Tolerance
J
F
000
—
1L0
1L00
2L0
2L00
3L0
3L00
4L0
4L00
5L0
5L00
6L0
6L00
7L0
7L00
8L0
8L00
9L0
9L00
10L
10L0
D15
Passive Devices
Resistors
▶ Chip Resistors for Current Detection (Metal plate type)
Chip Resistors for Current Detection (Metal plate type)
Ultra Low Ohmic Chip Shunt Resistors <Wide Terminal type> (PML series)
●
●
●
Ultra-low resistance range (0.5mΩ-).
Wide terminal configuration for high joint reliability.
Improved current detection accuracy by trimming-less structure.
PML10
PML18
PML50
PML100
PML series
J(±5%)
G(±2%)
±200
1.0, 1.5, 2.0, 2.5
Yes
1W
J(±5%)
G(±2%)
±150
0.5, 1.0, 1.5, 2.0, 2.5
Yes
1.5W
(2W at 25℃ )
J(±5%)
±200
0.5, 1.0, 1.5, 2.0, 2.2
±100
1.0, 1.5, 2.0, 2.2
±150
0.5
PML10
1220
(0508)
0.66W
PML18
1632
(0612)
PML50
2550
(1020)
2W
(3W at 25℃ )
3264
(1225)
Tolerance
J(±5%)
2W
Part No.
Size code
mm(inch)
L
W
PML10
1220 (0508)
1.2±0.15
2.0±0.15
PML18
1632 (0612)
1.6±0.15
3.2±0.15
PML50
2550 (1020)
2.5±0.2
5.0±0.2
PML100
3264 (1225)
3.2±0.25
6.4±0.25
t
a
●PML10/18
b
0.45 to 0.3*
±0.2
0.42 to 0.28*
0.55 to 0.3*
—
±0.15
±0.2
0.52 to 0.32*
1.0 to 0.5*
0.4±0.2
±0.15
±0.2
0.5 to 0.36*
0.9 to 0.7*
0.45±0.25
±0.15
±0.25
0.42±0.15
-55 to +155
●PML50/100
(Top)
(Top)
—
b
1L00
Resistors
Part No.
Tolerance
G
J
J
(Bottom)
b
(Bottom)
b
b
V
Special part code Nominal resistance
±2%
±5%
Resistance code, 3 or 4 digits.
Tolerance
J
G
Resistance
Value (Ω)
0.5mΩ
1mΩ
1.5mΩ
2mΩ
2.2mΩ
2.5mΩ
Resistance
code
:
3 digits
:
4 digits
Tolerance
J
G
0L5
0L50
1L0
1L00
1L5
1L50
2L0
2L00
2L2
─
2L5
2L50
Packaging specifications Code
Part No.
Code
Tolerance
J(±5%) G(±2%)
Packaging specifications
Reel
Basic ordering unit(pcs)
PML10
EZP
◎
◎
Paper tape(4mm Pitch)
φ180mm (7inch)
5,000
PML18
EZP
◎
◎
Paper tape(4mm Pitch)
φ180mm (7inch)
5,000
PML50
HZP
◎
—
Embossed tape(4mm Pitch)
φ180mm (7inch)
2,000
PML100
HZP
◎
—
Embossed tape(4mm Pitch)
φ180mm (7inch)
2,000
Reel (φ180mm) : Compatible with JEITA standard "EIAJ ET-7200B"
◎ : Standard product
D16
L
a
■Part No. Explanation
H Z P
t
W
a
* Each value range varies with the resistance. Please contact a ROHM sales representative for further details.
P M L 5 0
Yes
Yes
■Dimensions (Unit : mm)
D
Automotive
Grade
Available
Resistance value
(mΩ)
Rated power
(70℃)
PML100
Operating
temperature range
(℃)
Temperature
coefficient
(ppm / ℃ )
Size code
mm(inch)
Part No.
www.rohm.com
Passive Devices
Resistors
▶ Chip Resistors for Current Detection (Metal plate type)
Chip Resistors for Current Detection (Metal plate type)
High Power Ultra Low Ohmic Chip Shunt Resistors (PSR series)
●
●
●
●
High power 3W to 5W
Ultra low resistance rage (0.2mΩ-).
Excellent TCR characterristics
Convex structure
PSR400
PSR100
PSR500
PSR series
Part No.
Size code
mm(inch)
Rated power
(70℃)
Tolerance
Temperature *1
coefficient
(ppm / ℃ )
Resistance range
(mΩ)
±175
0.3, 0.5
PSR100
☆
6432
(2512)
3W
F(±1%)
±100
1.0
±75
2.0, 3.0
PSR400
10×5.2
(3921)
4W
F(±1%)
PSR500
15×7.75
(5931)
5W
F(±1%)
±175
0.3, 0.5
±75
1.0, 2.0, 3.0
±225
0.2
±150
0.3, 0.4, 0.5
±75
1.0, 2.0
Operating
temperature range
(℃)
Automotive
Grade
Available
Preparing
-55 to +170
Yes
Yes
*1(+20℃ to +125℃)
☆ : Under Development
■Dimensions (Unit : mm)
Part No.
PSR100
PSR400
PSR500
Resistance
0.3mΩ
0.5mΩ
1.0mΩ
2.0mΩ
3.0mΩ
0.3mΩ
0.5mΩ
1.0mΩ
2.0mΩ
3.0mΩ
0.2mΩ
0.3mΩ
0.4mΩ
0.5mΩ
1.0mΩ
2.0mΩ
●PSR400/500
L
W
6.35±0.15
10±0.3
15±0.3
t
1.30±0.15
1.15±0.15
3.05±0.25 0.75±0.15
1.00±0.15
0.75±0.15
1.85±0.15
1.3±0.15
5.2±0.3
0.9±0.15
1.1±0.15
0.9±0.15
1.85±0.15
1.4±0.15
1.15±0.15
7.75±0.3
1.05±0.15
1.3±0.15
0.9±0.15
H
b
0.35±0.15
1.12±0.3
0.5±0.1
2.0±0.6
0.5±0.1
4.0±0.6
(Top)
L
W
(Bottom)
H
t
b
D
P S R 4 0 0
Part No.
I T Q F
Tolerance
F
1%
Special part code
C
D
0.2mΩ
0.3mΩ
E
0.4mΩ
F
0.5mΩ
H
1.0mΩ
J
L
2.0mΩ
3.0mΩ
Packaging specifications Code
Part No.
Code
Tolerance
F(±1%)
Packaging specifications
Resistors
■Part No. Explanation
Reel
Basic ordering unit(pcs)
PSR100
KTQ
☆
Embossed tape(8mm Pitch) φ330mm (13inch)
5,000
PSR400
ITQ
◎
Embossed tape(8mm Pitch) φ330mm (13inch)
3,000
PSR500
HTQ
◎
Embossed tape(12mm Pitch) φ330mm (13inch)
2,000
Nominal resistance
Resistance code, 4 digits.
Resistance
code
Tolerance
F
Resistance
0.2mΩ
0.3mΩ
0.4mΩ
0.5mΩ
1.0mΩ
2.0mΩ
3.0mΩ
:
4 digits
F
0L20
0L30
0L40
0L50
1L00
2L00
3L00
Reel (φ330mm) : Compatible with JEITA standard "EIAJ ET-7200B"
◎ : Standard product ☆ : Under Development
www.rohm.com
D17
Passive Devices
Resistors
▶ Chip Resistors for Current Detection (Metal plate type)
Chip Resistors for Current Detection (Metal plate type)
High Power Low Ohmic Chip Shunt Resistors (GMR series)
●
●
●
●
High power (3W)
High heat dissipation
Excellent TCR characterristics
Low ohmic (10mΩ to 220mΩ)
GMR100
GMR series
Part No.
☆GMR100
Size code
mm(inch)
Rated power
(70℃)
Tolerance
Temperature *1
coefficient
(ppm / ℃ )
6432
(2512)
3W
J(±5%)
F(±1%)
±20
Resistance range
(mΩ)
Operating
temperature range
(℃)
Automotive
Grade
Available
-55 to +170
Preparing
5mΩ to 220mΩ (E6 series *2)
*1(+20℃ to +60℃)
*2 Please contact us for another standard nominal resistance values.
☆ : Under Development (Development schedule will vary depending on resistance value. Please Contact us.)
■Dimensions (Unit : mm)
Part No.
Size code
mm(inch)
GMR100
6432
(2512)
L
W
t
b
6.40±0.25
3.20±0.25
0.40±0.15
2.75±0.25
D
Resistors
D18
www.rohm.com
●GMR100
Passive Devices
Resistors
▶ Standard Nominal Resistance Values
Standard Nominal Resistance Values
E3
10
E6
E12
22
10
15
22
47
33
47
68
10
12
15
18
22
27
33
39
47
56
68
82
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
102
105
107
110
113
115
118
121
124
127
130
133
137
140
143
147
150
154
158
162
165
169
174
178
182
187
191
196
200
205
210
215
221
226
232
237
243
249
255
261
267
274
280
287
294
301
309
316
324
332
340
348
357
365
374
383
392
402
412
422
432
442
453
464
475
487
499
511
523
536
549
562
576
590
604
619
634
649
665
681
698
715
732
750
768
787
806
825
845
866
887
909
931
953
976
E24
E96
■Nominal Resistance
Resistors of a series fall into one of nominal resistance
ranges shown in the table above. Nominal resistance is
determined by the common ratio shown right.
■Resistance coding
Nominal resistance is expressed in 3 digits when the
resistance tolerance is ±5% and in 4 digits when ±1%.
The leading 2 or 3 digits indicate significant figure while
the last digit indicates the number of zeros. The letter R
denotes the decimal point if necessary.
EX1
EX2
EX3
EX4
EX5
EX6
Series
Common ratio
Remarks
√‾
10≒1.46
E6
6
E12
12
E24
24
E96
96
√‾
10≒1.21
Rounded off to a 2-digit figure.
√‾
10≒1.10
√‾
10≒1.02
Rounded off to a 3-digit figure.
22Ω→22×10 0Ω→220 (the last digit indicates the number "0" of a multiplier)
47kΩ→47×103Ω→473 (the last digit indicates the number "3" of a multiplier)
1.2MΩ→12×10 5Ω→125 (the last digit indicates the number "5" of a multiplier)
2.7Ω→2R7 (the decimal point indicate the letter R / the letter R apply to the low Resistance less than 10Ω)
1130Ω→113×101Ω→1131 (the last digit indicates the number "1" of a multiplier / Resistance Tolerance 1% (F) products)
0.10Ω→R10
D
■ For basic guidelines on using resistors,
see the technical reports issued by Japan
Electronics and Information Technology
Industries Association. JEITA RCR-2121A.
“Guideline of notabilia for fixed resistors
for use in electronic equipment (Safety
Application Guide for fixed resistors for
use in electronic equipment)”
■Supplementary to notes
* 1 : When resistor is to be exposed to a transient load (excessive large load, such as pulse), mount the resistor on your
product and check the condition and evaluate the result. Constant application of a voltage above the rated voltage will
degrade the performance and reliability of the resistor.
Do not apply a voltage exceeding the rated voltage across any ROHM resistors.
* 2 : Rated voltage (V) =√rated power (W)×nominal resistance (Ω) or the limiting element voltage, whichever smaller, is the rated
voltage.
www.rohm.com
D19
Resistors
■Supplement of rated power
・When the ambient temperature exceeds the rated ambient temperature,
derate the load power based on the derating curve.
Passive Devices
Resistors
MEMO
D
Resistors
D20
www.rohm.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement