Remarks
{-Thanks you for your interest in this projector, please read rhis manual book carefully before using the projector.
*To
ensure stable porver supply. please use national standard pos'er cable and
.|Please use the po*'er cord s'ith grounding.
pot'er suppl;' and power cable indicated on the projector or the manual.
{'To protect your e)'es. please do not look into the lens rvhile the machine is s'orking:
+\Vhile working. the projector should be kept as'a1' from cloth, sofa or any other material that could have stock the tentilation holes. And no flammable and explosion materials should be put around the proj ector-
*To
prevent electric shock, the proj ector and porver adaptor should be kept au-ay from water as they have no \\'ater-proof function; no such apparatus as vase or cup should be put around the projector.
*The projector should be put in the place with good ventilation, dry and clean condition, and avoid vibration, heat and radiation.
*Please turn offthe projector and cut offthe porver supply,
if
it
will
not been used for long time.
*Ifany
trouble is found for the projector, please cut offthe power supply first. Customer please does not dismantle the projector without authorization, or the company bears no obligation for free maintenance service.
*The projector might be different from description in the useimanual because ofthe software update, please subject to the projector, use manual is for reference only.
1.
Product Feature
*The professiona appearance design for ventilation has largely improved the stability and life time for the projector;
+ The LED lamp can works for over 20 thousand hours, and.
can pror-ide beautiful colors;
* Manual focus adjusting, get picture from 20 to 60 inches;
* Professional trouble shooting and protection measures;
* The projector is small and iight, easy to carry with;
* Easy changing in
1
6:9 ar,d.4:3 aspect ratio;
* Low power consumption, echo-oriented;
* Multi-function interface: AV,VGA,SD, USB;
* Vehicle power supply supported, easy to use;
2.,
Fittings
IJser manual
Power adaptor
3 in
1
AV cable
Remote control pc pc pc pc
3-
Specifications
.rXlilF,XSs i$:{{iq!sac"
320r240
LED
English etc
300:l
20-
80Inches
:inittgt,Iaislatiiar ffi eoi,{$iii&i!i{i!
t67'toK
24W i:ttlw$tg&f'.'i, 0.38KG
:'i.Qii$r!.{6irs:,'
xll&l{,{*:l,
Manual rem ote controi
Head phone
':.;'lQt$Aili&ii:li
I[igc
.:i
*.r.-
ii
Sryport€d.a
rosolutior'i
Input
Yoltaee
BrighEess-,
Lens
Pmjction dbtance
Projection
Spcaler
SiE
LCD
I
024t768
t2v
48 Lux
F=l15
1.25-.t.0m
Front projection
l.0s '2
127* 126.56.6mm
Working
Temp
I
0-36c
Itrput AV,T/GA.USB SD
4,, Multi-media
support
files
WMA
.wma
M P3.
mp3
M4,A .m4a
IPEG.
BM P.
ipe bmp png PNG
M PEGl
H264
MOV datLmogLmoee
M PEG2.
mpg
M PEG4, avi\ -mo4
RM,
RMVB rm\rmvb
.mkvLmov
.avi\.mo4
M JPEG
FLV
vcl
DivX,
.avl
.flv
.wmv/-asf
,DIVX\.AVI
DIVX.XVIf)
RV8\9\10
MPEG1.2 4
H264 vc1
MPEG.DIVX
Remarks:
Ifyou
want to play any frles that is not included in the above table, you might encounter troubles, and please transform the format first so as to make it play snoothly and normally.
5..
Product details
AV
input
fl0ff[[[[
VGA IN
IR
RECEIVER
k
6'.
Button function
Indicator
Power button
Enter
Left
Right
Input
Exit
Enter: confirmthe choosingitem;
Left:
moveleft,
upandvolumedown:
Right: move right. down and volume up:
Input:
Choose the signal input source;
Esc: exit the current menu or back;
Power button: power on and off.
7,,
Remote
Button function
1. Power
2. Play/pause
3.Up,down
4. left, right button
Confirm/ok
5.
6.
OSD menu
Exit
7. Forward/backward
8. Previous/next
9.
Zoon
10. Previous page
11.
Mute
12. Next page l3.Information
14.
1
5.
Volume adjust
Input source
16. Sound mode
(9
Li-batterry is used for the remote control, for the installment, please see the attachment.
8.. Function
operation
8.1,
Power on and
off
Stand-by
status:
After the projector is power through adaptor, it goes into stand-by status, and the red indicate light flashes;
Power on: Press the power button once, the indicator light stops flash, the projector start works.
Power the
off:
Press the power button once, the projector is off, and indicate light starts flash.
8.2.
Focusing
Take the table ofprojection size and distance table for reference.
Put the projector at a certain place within the distance scale, and then rotate the lens to make the picture c1ear.
Remarks:
While using the projector, please connect the power adaptor with the projector first, and then connect the power adaptor with the power.
8.3 Menu Operation
8.3.1
Input
source
selection
Prsss control get
*soorce" button on the remote
or-irput"on
the projector to
&e souce menu, then press
"OK"
button
m
the remote control to confirm the inpu.tsource you need.
8.3 .2 Picture
menu
operation
Press "OSD Menu" to enter into the main menu and press
"
<l>"
buttontochoose picture, then press up or down button to choose sub
-menu you need to adjust, the sub-menu you can adjust is
Picture mode, screen and color temperature, aspect ratio, noise reduction horizontal
flip.
u$&r
e&ffi,'reuaX
8.3.3 Sound
menu
operation
Press "OSD Menu" to enter into the main menu and press sound, then press up or down button to choose sub menu you want to adjust.
The sub-menu for sound includes: sound mode, balance auto volume, surround sound EQ and SPDIF mode.
8.3 .4 Time
menu
operation
Press "OSD Menu" to enter into the main menu and press
"
</> "
button to choose
Time, then press up or down button to choose sub menu you want to adjust.
The sub-menu for time includes:
Clock, off time, on time, sleep timer, and auto sleep
8.3.5
Option
menu
operation
Press "OSD to enter into
Menu" the main menu and press
*
<l>"
button to choose sound, then press up or down button to choose sub menu you want to adjust.
The sub-menu you can adjust under option menu are:
OSD language, software update, color range, blending
OSD duration.
8.3.6
Multi-media
menu
operation
lnsert the USB or SD first, and then choose Media from source menu. Then choose the icon for different files and press OK to confirm.
By this menu, you need to play video, photo and music correspondently with the icon showing.
Remarks: You can only insert the USB or SD on at a time, or the projector can not rec ognize any ofthem.
9..
Daily
Maintenance
During use, you are required to perform some simple daily maintenance work to keep the projector in good status. And this simple job is to keep the lens clean, but do not dismantle any parts of the projector.
But you need to note that:
A
Its' much better to use professional lens cleaning cloth, orair gun to ofthe lensgetridofthe dust on the surface
B Ifany dirt port is found,please getrid of ir byusing the lens of cleaning paper or wet soft cloth to get rid it. Please note thatyou need to clean them gentle, do not use abrasive substance to rub the surface the lens.
of
C Please do not use wax, or ethyl alcohol, benzene, diluent any other chemical cleaning material, because they are harmful to the case ofthe projector
Ifthe projector will not be used for a long time, please do not forget:
A
Store the projector in the place with temperature of-10-60 co
B
Take out the battery in the remote control,
C Use the original packing.
10..
Trouble
Shooting
Any trouble encountered during use, refer to the table below
L
The powq switch ou the botlom ofthe projec,tor is not tumed on;
2, Thepowercableisnot well conBected;
3.
The outlet short"
I.
Signal soure tumed off;
2.
Prcjector is not connected with the input source;
3,
Choose th€wronginpul signal source" volume is set on the min one.
1.
Switch on the powd;
, Raonnectthepowo cable;
J. Use a new outlet"
1. Tm on signal soure
. R€oonect the input souce;
3, Chage signal source" remote control tro use prcjector is not focused rightly l.
No battery in remote antrol
,
Battery is used off
3. distanre is too far or not rightly
Adjut focus mtil image is cleil
1. Addbatttry.
2,
Chmge new battery
3,
Pl€tre operato the rmote within one metel, and with the remote control point to the IR rweiver.
If
after all the steps above, you
still
can not solve this problem please contact with the distributor.
