Pro-face | PFXGM4301TAD | 65.536 värin kirkas TFT näyttö, ethernet vakiona, nopea

Graphic Operator Interface
Uutu
us!
www.klinkmann.fi
Markkinajohtajalta
täysin uuden sukupolven käyttöpääte
GP4000MSERIES
3.5"
QVGA
65.536 värin
kirkas TFT näyttö, ethernet
vakiona, nopea asennus
ø 22mm reikään
5.7"
QVGA
Pieni
tehonkul.
5,7” < 6,8W
3,5” < 6,5W
Kevyt
5,7” 620g
3,5” 360g
Sama pääte kaikkiin järjestelmiin: Rockwell,
Siemens, Omron, Schneider, ABB, ethernet jne.
Nopea konfiguroida ja asentaa
Edullinen hintataso myös sarjatuotteisiin
Täydellinen pääteperhe, samalla ohjelmistolla - katso erillinen esite GP-mallit 3,4”-15”.
www.klinkmann.fi
Operation panel with realistic graphics
comes as a HMI standard
Simple and precise operation made possible by the 65,536-colors TFT display.
Easy to identify, easy to install and easy to connect via a variety of interfaces.
Easy to identify
Crystal-clear TFT LCD for
powerful expression in
65,536 colors.
Realize expressive operation screens with
3D Real Parts in 65,536 colors.
Enhanced graphics for even the
most basic functions.
Utilize 65,536 colors for basic functions
such as 7-digit display and color-swap for
alarm status messages.
A variety of graphical fonts provides easy-to-read numbers.
Easy to create
Drag-and-drop allows you to easily create operation screens on
GP-Pro EX, a screen creation software.
In addition, it’s easy to create attractive screens by downloading
backgrounds and illustrations online.
http://www.pro-face.com/otasuke/
Use the project converter to distribute screens assets with
GP-Pro EX.
5.7"
Low Power
Consumption
QVGA
Light Weight
5.7” 0.62 kg (1.36 lb.) or less
3.5” 0.36 kg (0.79 lb.) or less
5.7” 6.8 W or less
3.5” 6.5 W or less
*Main units only
* Image of 5.7”model
Easy to install
Just make a φ22 mm [0.87 in. ] circular hole.
Display module
Enclosure
Nut
Rear module
Easy to connect
Provides a variety of onboard interfaces for hassle-free connection to various peripheral and control devices.
Ethernet
PC
USB mini B (Device)
Screen Transfer
USB Type A (Host)
Bar-code Reader
2D Code Reader
USB memory
Ethernet (10Base-T/100Base-TX)
Controller
or Serial (RS-232C/422/485)
GP-4000M
GP-4000M
GP-4000M
PLC
The Ethernet Multilink function allows you to add a GP as a
sub-display on an Ethernet network without changing any
machine settings.
Connect to various control devices via Ethernet or a serial port.
Connect directly to a variety of devices
Maker Name
Driver Name
General Ethernet
General SIO
Memory Link
FATEK AUTOMATION Corporation FB Series SIO
MICREX-F Series SIO
Fuji Electric
MICREX-SX Series Ethernet
Corporation
MICREX-SX Series SIO
TOYOPUC CMP-LINK Ethernet
JTEKT Corporation
TOYOPUC CMP-LINK SIO
KV700/1000/3000/5000 CPU Direct
KEYENCE
Corporation
KV-10_80RW/TW CPU Direct
KOSTAC/DL Series CCM SIO
KOYO ELECTRONICS
CO., LTD.
KOSTAC/DL Series MODBUS TCP
Master-K Series Cnet
LS Industrial Systems
XGT Series Cnet
XGT Series Fenet
Mitsubishi Electric Corporation A Series
Digital Electronics
Corporation
More drivers under development
SIO or
Ethernet
Ethernet
multi-link
* On the GP4000M Series, either of a serial interface or an Ethernet interface
can be active for communication to control devices.
Maker Name
Driver Name
A Series Computer Link
A Series Ethernet
FX Series Computer Link
FX Series CPU Direct
FX Series Ethernet
Mitsubishi Electric
Q Series CPU Direct
Corporation
Q Series QnU CPU Ethernet
Q/QnA Serial Communication
Q/QnA Series Ethernet
QnA Series CPU Direct
QUTE Series CPU Direct
General MODBUS RTU SIO Master
MODBUS IDA
General MODBUS TCP Master
C/CV Series HOST Link
OMRON Corporation
CS/CJ Series Ethernet
CS/CJ Series HOST Link
Panasonic Electric Works, Ltd. FP Series Computer Link SIO
SIO or
Ethernet
Ethernet
multi-link
Maker Name
Driver Name
Temp. Controller MODBUS SIO
Temperature Controller
DF1
Rockwell Automation, Inc. DH-485
EtherNet/IP
MODBUS SIO Master
MODBUS Slave
Schneider Electric
Industries
MODBUS TCP Master
Uni-Telway
SIMATIC S7 Ethernet
Siemens AG
SIMATIC S7 MPI Direct
Siemens Building
SAPHIR SIO
Technologies
TOSHIBA MACHINE CO., LTD. TC Series(TCmini/TC200)
MP/SARVO Ethernet
YASKAWA Electric
Corporation
MP Series SIO(Extension)
YOKOGAWA Electric
Personal
Computer Link SIO
Corporation
SIO or
Ethernet
Ethernet
multi-link
RKC INSTRUMENT INC.
Visit the Otasuke Pro! support website for the newest drivers and more detailed information! → http://www.pro-face.com/otasuke/
Functional Specifications
GP-4301TM
GP-4201TM
General Specifications
Display Type
5.7” TFT Color LCD
3.5” TFT Color LCD
International Safety
Standards
Display Colors
65,536 colors
Resolution
320 x 240 pixels (QVGA)
LED Backlight
White LED
W115.2 x H86.4
mm(W4.53×H3.40 in.)
Effective Display Area
GP-4301TM
GP-4201TM
UL508, UL 1604 *3 orANSI/ISA 12.12.01*3, CSA-C22.2 No.142, CSA-C22.2
No.213 *3, 2004/108/EC EMC Directive,GOST-R,KC
Conforming Standards
Input Voltage
W70.56 x H52.92
mm(W2.78×H2.08 in.)
DC24V
Power Consumption
6.8 W or less
6.5 W or less
Surrounding Air Temperature
0 to 50 °C (32 to 122 °F)
Grounding
Functional grounding: Grounding resistance of 100Ω,
2mm2 (AWG 14) or thicker wire, or your country’s applicable standard.
Vibration Resistance
IEC/EN61131-2 compliant,5 to 9 Hz Single amplitude 3.5 mm [0.14 in.],
9 to 150 Hz Fixed acceleration: 9.8 m/s2,X, Y, Z
directions for 10 cycles (100 min)
Resistive Film (analog)
Structure
NEMA#250 Type 4x (indoor, installed in an enclosure)
Display Module: IP 65f (IEC60529) Rear Module: IP 20 (IEC 60529)
Ethernet (LAN)
IEEE802.3i/ IEEE802.3u, 10BASE-T/100BASE-TX
Connector: Modular jack (RJ-45) x 1
Weight
Serial (COM)
RS232C / RS422 / RS485
Asynchronous Transmission,
Data Length: 7 or 8 bit, Parity: none,Odd or Even, Stop Bit:1 or 2 bit,
Data Transmission Speed:2,400 bps to187,500 bps
D-Sub 9 pin (plug)
USB (Type A)
Conforms to USB2.0 (Type A) x 1, Power Supply Voltage: DC 5 V 5 %,
Communication Distance: 3 m (9.84 ft) or less
USB (Type mini B)
Conforms to USB2.0 (mini B) x 1, Communication Distance: 5 m (16.40 ft) or
less
Language Fonts *1
Japanese, English, Chinese (Simplified),
Chinese (Traditional), Korean, Cyrillic, Thai
Character Sizes
Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts,
Stroke font: 6 to 127 pixel fonts,Image font: 8 to 72 pixel fonts
Application memory *2
FLASH EPROM 8 MB
Clock Accuracy
Uses the clock of an external device
Interface
Touch Panel Type
0.62 kg (1.36 lb.) or less
(main unit only)
Cooling Method
0.36 kg (0.79 lb.) or less
(main unit only)
Natural air circulation
*3 Suitable for use in hazardous locations in accordance with Class ,Division 2 Groups A, B, C and D
standards.
*1 Please refer to the GP-Pro EX Reference Manual for details on font types and character codes.
*2 Capacity available for user application. The capacity depends on how many fonts you load from
Editor software.
Unit:mm [in.]
<External Dimensions & Parts Names>
Display Module GP-4301TM
Display Module GP-4201TM
Rear Module (for all GP units)
30.6
[1.20]
32.8
[1.29]
16.2
[0.63]
98.1[3.86]
③
97.6
[3.84]
④ ⑤ ⑥
A
B
9.5
[0.37]
⑦
C
D
17.2[0.67]
80
[3.14]
22φ [0.86φ ]
①②
31.5
[1.24]
163
[6.41]
17.5[0.69]
Parts Names
③
129.4
[5.09]
22.1φ [0.87φ ]
118
[4.64]
①②
Panel Cut-out (for all GP units)
⑧
40.1
[1.57]
A
B
D
C
+0
+0
+0
1.5 to 6
4.00[0.16] 22.5[0.89] 30.00[1.18]
[0.06 to 0.23] -0.20[0.008] -0.30[0.012] -0.20[0.008]
*If rotating torque acted on a display module is 2.5 N.m
(22.12 in-lb) or more, use an anti-rotation tee which is
supplied with a GP unit. The anti-rotation tee supports
up to 6 N.m (53.10 in-lb).
①Display ②Touch panel ③Anti-rotation tee ④USB (Type A) interface connector ⑤Serial I/F (host I/F) ⑥Ethernet Interface (LAN) ⑦Power Plug Connector ⑧USB (mini B) interface connector
■ Units
Product Name
Model No.
Description
GP-4301TM
PFXGM4301TAD
5.7", QVGA (320 x 240 pixels), 65,536 colors, RS-232C/422/485, USB (Host x1, Device x1), Ethernet, DC24V
GP-4201TM
PFXGM4201TAD
3.5", QVGA (320 x 240 pixels), 65,536 colors, RS-232C/422/485, USB (Host x1, Device x1), Ethernet, DC24V
■ Option Items * We offer various cables for connections to control devices via serial interfaces. For details, please refer to the manual.
Product Name
Model No.
Interface
USB
GP-Pro EX
Description
EXEDV**
Cable to convert the USB interface of a GP unit into a serial (RS-232C) interface.
USB Transfer Cable (USB Type A/mini B)(1.8 m)
CA5-USBEXT-01
Cable for transferring screen data from a PC (USB Type A) to the GP unit (USB mini B).
USB Panel-mount Extension Cable (USB mini B) (1 m)
CA6-USB232-01
Extension cable attaching to the USB (mini B) interface on the front side of the operation panel.
USB Front Cable (1m)
ZC9USCBMB1
Extension cable attaching USB interface to front panel.
ZC9USEXMB1
Screen editor software Ver.2.71 or later
USB-Serial (RS-232C) Conversion Cable (0.5m)
GP unit Description Screen
Protection Sheet
For GP-4301TM
PFXZCBDS61
For GP-4201TM
CA6-DFS4-01
Accessories Kit
PFXZGMAK1
Disposable, dirt-resistant sheet for the GP unit’s screen. (5 sheets/set) (Hard type)
Anti-rotation Tee*1, USB cable clamp to prevent disconnection (USB Type A*1, Mini B, for 1 port), 2mm-hight spacer to
adjust installation panel thickness (1pc/each)
*1 Please purchase when the product is damage or lost.
■ Maintenance Items *Please purchase when the product is damage or lost.
Product Name
Model No.
Description
DC Power Supply Connector
PFXZGMNT1
Connector to connect DC power supply cables (5 pcs/set)
Display Installation Nut
PFXZGMSW1
Nut to install the display module (10 pcs/set)
Socket Wrench
PFXZGMCNDC1
Socket wrench to tighten and loosen the display installation nut (1 pc/set)
Proface_GP4000M_fi_1213
www.klinkmann.com
Riga
tel. +371 6738 1617
klinkmann@klinkmann.lv
Helsinki
tel. +358 9 540 4940
automation@klinkmann.fi
St. Petersburg
tel. +7 812 327 3752
klinkmann@klinkmann.spb.ru
Moscow
tel. +7 495 641 1616
moscow@klinkmann.spb.ru
Yekaterinburg
tel. +7 343 287 19 19
yekaterinburg@klinkmann.spb.ru
Samara
tel. +7 846 273 95 85
samara@klinkmann.spb.ru
Кiev
tel. +38 044 495 33 40
klinkmann@klinkmann.kiev.ua
Vilnius
tel. +370 5 215 1646
post@klinkmann.lt
Tallinn
tel. +372 668 4500
klinkmann.est@klinkmann.ee
Мinsk
tel. +375 17 200 0876
minsk@klinkmann.com
Download PDF