Getting Started with pylon 4 and OpenCV

Add to my manuals
12 Pages

advertisement

Getting Started with pylon 4 and OpenCV | Manualzz

APPLICATION NOTE

Getting Started with pylon and OpenCV

Applicable to all Basler USB3 Vision, GigE Vision, and IEEE 1394 cameras

Document Number: AW001361

Version: 01 Language: 000 (English)

Release Date: 18 November 2015

Software Version (pylon): 4.x

Contacting Basler Support Worldwide

Europe, Middle East, Africa

Basler AG

An der Strusbek 60–62

22926 Ahrensburg

Germany

Tel. +49 4102 463 515

Fax +49 4102 463 599 [email protected]

The Americas

Basler, Inc.

855 Springdale Drive, Suite 203

Exton, PA 19341

USA

Tel. +1 610 280 0171

Fax +1 610 280 7608 [email protected]

Asia-Pacific

Basler Asia Pte. Ltd.

35 Marsiling Industrial Estate Road 3

#05–06

Singapore 739257

Tel. +65 6367 1355

Fax +65 6367 1255 [email protected]

www.baslerweb.com

All material in this publication is subject to change without notice and is copyright

Basler AG.

AW00136101000 Basler Application Note

Table of Contents

1 Introduction .............................................................................................................................. 2

2 Requirements ........................................................................................................................... 2

2.1

2.2

2.3

Basler pylon Camera Software Suite .......................................................................... 2

OpenCV ....................................................................................................................... 2

Microsoft Visual Studio and Microsoft Windows ......................................................... 2

3 OpenCV Installation ................................................................................................................ 3

4 Common Settings for Building Applications with pylon and OpenCV in Visual

Studio ........................................................................................................................................ 4

5 Sample Code to Run pylon and OpenCV .............................................................................. 7

Revision History ............................................................................................................................ 10

Getting Started with pylon and OpenCV 1

AW00136101000 Basler Application Note

1 Introduction

OpenCV is an open-source computer vision library that allows you to perform image processing on

Basler Machine Vision cameras. This application note provides information on how to install and use OpenCV in combination with Basler’s pylon Camera Software Suite in Microsoft Visual Studio on Windows operating systems.

OpenCV does not support Machine Vision standards such as USB3 Vision, GigE Vision, or

IEEE 1394 (FireWire). Therefore, it is not recommended to grab images using OpenCV API functions. Instead, Basler recommends using the pylon Camera Software Suite SDK to grab images and convert them to OpenCV images.

This document provides further information on the integration of OpenCV functions for image display, image saving, and video recording into your pylon source code.

2 Requirements

2.1 Basler pylon Camera Software Suite

This document assumes you are using the latest version of the pylon Camera Software Suite for

Windows. The procedures described in this application note have been accomplished with the pylon Camera Software Suite version 4.2.0.4240 (64 bit).

You can download the pylon Camera Software Suite from the Downloads section of the Basler website: www.baslerweb.com

.

For information about how to install the pylon Camera Software Suite, see the Installation and

Setup Guide for Cameras Used with pylon for Windows (AW000611). You can download the

document from the

Documents Download section of the Basler website: www.baslerweb.com

.

2.2 OpenCV

This document assumes you are using OpenCV version 3.0.0.

You can download OpenCV for Windows from www.opencv.org

.

2.3 Microsoft Visual Studio and Microsoft Windows

The procedures described in this application note have been accomplished with Microsoft Visual

Studio 2012 on a Windows 7 64-bit operating system.

The procedures described in this document can also be applied to Microsoft Visual

Studio 2013 and Windows 7 or Windows 8 (32-bit or 64-bit operating systems).

Getting Started with pylon and OpenCV 2

AW00136101000 Basler Application Note

3 OpenCV Installation

The following steps apply to OpenCV version 3.0.0, but may also apply to newer versions.

To set up the environment variables for OpenCV:

1. Extract the OpenCV files to C:\

2. On the Start menu, right-click Computer and select Properties.

3. In the left pane of the System dialog box, click Advanced system settings.

4. On the

Advanced tab of the System Properties dialog box, click Environment Variables.

5. In the System Variables box of the Environment Variables dialog box, scroll to Path and select it.

6. Click the lower of the two Edit buttons in the dialog box.

7. In the

Edit System Variable dialog box, scroll to the end of the string in the Variable value box and add

;C:\opencv\build\x64\vc11\bin

For the 32-bit OpenCV version, replace x64 with x86.

If you are using Microsoft Visual Studio 2013, replace vc11 with vc12.

8. Click OK.

You should now set an OpenCV environment variable to facilitate your work. The variable will hold the path to the build directory of the OpenCV library. To do so:

9. Click the lower of the two New buttons in the dialog box.

10. In the New System Variable dialog box, select Variable name and add OPENCV_DIR.

11. Select Variable value and add C:\opencv\build\x64\vc11:

Depending on your Visual Studio and Windows operating system version, you may need to adapt the

Variable value entry accordingly. Possible entries for OpenCV

3.0.0 are:

C:\opencv\build\x86\vc11 (Visual Studio 2012 – 32-bit Windows)

C:\opencv\build\x64\vc11 (Visual Studio 2012 – 64-bit Windows)

C:\opencv\build\x86\vc12 (Visual Studio 2013 – 32-bit Windows)

C:\opencv\build\x64\vc12 (Visual Studio 2013 – 64-bit Windows)

Getting Started with pylon and OpenCV 3

AW00136101000 Basler Application Note

4 Common Settings for Building Applications with pylon and OpenCV in Visual Studio

The steps below outline how to prepare the Visual Studio settings in order to use OpenCV with

Basler’s pylon Camera Software Suite SDK.

For more information about how to set up your Microsoft Visual Studio project for building applications with pylon, refer to the Programmer's Guide and API Reference for pylon for

Windows. The guide is part of the pylon Camera Software Suite installation: (

Start >

All Programs > Basler > pylon 4 Camera Software Suite > Documentation > C++

Programmer's Guide and API Reference Documentation).

This application note assumes that you have already read the Programmer's Guide and API

Reference for pylon for Windows (especially the topic Programmer's Guide and its section

Common Settings for Building Applications with pylon) and have set up the PYLON_ROOT and

PYLON_GENICAM_ROOT environment variables for building a 64-bit application in your project.

The project used in this document is named “Pylon_with_OpenCV”.

To set up the Visual Studio project properties for OpenCV:

1. Open your project in Visual Studio 2012, right-click on the project, and select Properties:

2. In the Property Pages window, select C/C++ > General.

Getting Started with pylon and OpenCV 4

AW00136101000 Basler Application Note

3. From the

Additional Include Directories drop down, select Edit and add the OpenCV include directory: $(OPENCV_DIR)\..\..\include

4. Click

OK.

5. In the Property Pages window, select Linker > General.

6. From the

Additional Library Directories drop down, select Edit and add the OpenCV library directory: $(OPENCV_DIR)\lib

7. Click OK.

8. In the

Property Pages window, select Linker > Input.

9. From the Additional Dependencies drop down, select Edit and add the following OpenCV lib files:

• opencv_ts300.lib

• opencv_world300.lib

Getting Started with pylon and OpenCV 5

AW00136101000 Basler Application Note

10. Click OK.

11. Click

Apply.

12. To configure your project for Debug mode, do the following: a. In the

Configuration drop down box, select Debug. b. Repeat steps 2 to 8. c. In step 9, add the following OpenCV debug lib files:

• opencv_ts300d.lib

• opencv_world300d.lib d. Click

OK. e. Click Apply.

Getting Started with pylon and OpenCV 6

AW00136101000 Basler Application Note

5 Sample Code to Run pylon and OpenCV

The following sample code demonstrates how to accomplish these tasks:

 Acquire images with pylon API functions.

 Convert the acquired pylon images to OpenCV images.

 Display and save images with OpenCV functions.

 Record video files with OpenCV functions.

1. First, we include all necessary OpenCV and pylon API header files, declare required namespaces, and define some global variables needed throughout our sample.

Getting Started with pylon and OpenCV 7

AW00136101000 Basler Application Note

2. We then create the first camera we found, regardless of its interface, i.e. GigE Vision, USB3

Vision or IEEE 1394 (FireWire). We get the camera’s GenICam nodemap to access the camera’s Width and Height parameters which are needed for the initialization of OpenCV video creator. We set up a pylon image format converter object and define the desired output pixel format, which is needed to convert the grabbed pylon image buffer to a pylon image. After that, we convert the pylon image to an OpenCV image.

3. The OpenCV video creator and OpenCV image objects are declared and initialized. Then, we use pylon API functions to start image acquisition and retrieve the grabbed images:

Getting Started with pylon and OpenCV 8

AW00136101000 Basler Application Note

4. Finally, we convert the grabbed image buffer to a pylon image, which in turn is converted to an

OpenCV image. The OpenCV image is used for image display, image saving, and video file recording using OpenCV functions:

5. The image below shows the running application with a test image grabbed from a Basler dart

USB3 Vision camera in an OpenCV display window:

If you want to get the complete sample source code, get in contact with your local Basler support team as listed at the beginning of this document.

Getting Started with pylon and OpenCV 9

AW00136101000 Basler Application Note

Revision History

Document Number Date

AW001361 01000 18 Nov 2015

Changes

Initial release version of this document.

Getting Started with pylon and OpenCV 10

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals