datasheet for ASD26-MT1032
ASD26-MT1 ET Series
2.5” SATA 6Gb/s SSD with 19nm Toggle
MLC NAND Flash
Features
SSDs
Sustained read up to 400 MB/s
Sustained write up to 400 MB/s
Capacity: 32, 64, 128, 256, 512 GB
SATA 6Gb/s interface
19nm Multi-level cell NAND Flash with Toggle
Mode technology
Shock and vibration resistant
Marvell 88SS9187 controller
Specifications
Compatibility
SATA
SATA Revision 3.0 compliant: compatible with SATA 1.5Gb/s,
3Gb/s & 6Gb/s interface
ATA/ATAPI- 8 compliant
SSD enhanced SMART ATA feature set
Native Command Queuing (NCQ) command set
TRIM supported
Native Command Queuing (NCQ) command set
TRIM supported
Physical
32, 64, 128, 256, 512GB GB
Multi-Level Cell (MLC) NAND
SATA 6Gb/s
2.5” slim design form factor
100 x 68.85 x 9.5mm (L x W x H)
80 g
Power Requirements
Performance
Bandwidth
(to be update)
Read and Write IOPS
512GB ET
Sustained read up to 400 MB/s
Sustained write up to 400 MB/s
256GB ET
Sustained read up to 400 MB/s
Sustained write up to 400 MB/s
128GB ET
Sustained read up to 400 MB/s
Sustained write up to 300 MB/s
64GB ET
Sustained read up to 400 MB/s
Sustained write up to 170 MB/s
32GB ET
Sustained read up to 300 MB/s
Sustained write up to 85 MB/s
512GB ET
Random 4KB Read: up to 70,000 IOPS
Random 4KB Write: up to 60,000 IOPS
256GB ET
Random 4KB Read: up to 70,000 IOPS
Random 4KB Write: up to 60,000 IOPS
128GB ET
Random 4KB Read: up to 60,000 IOPS
Random 4KB Write: up to 40,000 IOPS
64GB ET
Random 4KB Read: up to 56,000 IOPS
Random 4KB Write: up to 40,000 IOPS
32GB ET
Random 4KB Read: up to 40,000 IOPS
Random 4KB Write: up to 20,000 IOPS
Management
5V SATA
SATA interface power management
OS-aware hot plug/removal
15-pin SATA connector for DC 5V input
<1.0 sec
Connector
Power on to ready
Reliability
MTBF
Long Life Support
1,500,000 hours
Minimum of 5 years useful life
Ordering Information
Model Number
Description/Configuration
ASD26-MT1512-ET
2.5” 512GB SATA 6Gb/s SSD series, 19nm MLC type, (-40°~85°)
ASD26-MT1256-ET
2.5” 256GB SATA 6Gb/s SSD series, 19nm MLC type, (-40°~85°)
ASD26-MT1128-ET
2.5” 128GB SATA 6Gb/s SSD series, 19nm MLC type, (-40°~85°)
ASD26-MT1064-ET
2.5” 64GB SATA 6Gb/s SSD series, 19nm MLC type, (-40°~85°)
ASD26-MT1032-ET
2.5” 32GB SATA 6Gb/s SSD series, 19nm MLC type, (-40°~85°)
Dimensions
Units: mm
M3 screw holes (4X)
(Screw depth into drive=3.0mm Max.)
69.85 ± 0.38
M3 screw holes (4X)
(Screw depth into drive=3.5mm Max.)
4.065 ± 0.2 (2X)
61.72± 0.2 (2X)
9.4± 0.2 (2X)
Environmental
100 ± 0.38
Operating Temperature Commercial: 0°C to 70°C
Industrial: -40°C to 85°C
Storage Temperature
-40°C to 85°C
Shock
1,500 G, 0.5 ms
Vibration
Operating: 7~800 Hz, 2.17 Grms
Non-operating: 7~800 Hz, 3.08 Grms
Certiications
FCC, UL, CE , RoHS
0.3 (REF)
SEE DETAIL A
14 ± 0.2 (2X)
9.365 ± 0.2 (2X)
3± 0.2 (4X)
4.8 (REF)
30.125 ± 0.38
14 ± 0.2 (2X)
9.5 ± 0.2
HDD CENTER
3.5 ± 0.38
http://www.adlinktech.com/SSD/
76.6 ± 0.2 (2X)
9
Capacity
Flash Components
Interface
Form Factor
Dimensions
Weight:
SATA CONNECTOR CENTER
DETAIL A
SCALE 2/1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement