Broadvox SIP Trunk Setup Guide
DSX
Broadvox SIP Trunk Setup
April 22, 2011
Issue 1.05
NEC Corporation of America
4 Forest Parkway, Shelton, CT 06484
DSX SIP Trunk Setup
DSX
Issue 1.05
Copyright 2011
NEC Corporation of America
6535 N. State Highway 161
Irving, TX 75039-2402
Communications Technology Group
Revision History
Issue
Date
1.04
1/19/11
1.05
4/22/11
NEC Corporation of America
Revisions
•
Corrected typo: Available SIP line numbers in a DSX-40 without
a COIU expansion card are 5-12.
•
In the System Administrator, Single registration mode is called
Common.
•
Updated required software level, expanded RTP port forwarding
range, and added System Administrator screen shots.
•
Removed requirement for 1104-09.
Page 2 of 11
April 22, 2011
DSX
Broadvox SIP Trunk Setup
1.05
Contents
1 Overview................................................................................................................................................ 4 2 Method 1: Broadvox Static Setup .......................................................................................................... 4 2.1 System Router Setup.......................................................................................................................... 4 2.1.1 NAT and SIP.................................................................................................................................... 4 2.1.2 Port Forwarding ............................................................................................................................... 4 2.2 DSX Setup .......................................................................................................................................... 4 2.2.1 Software Level ................................................................................................................................. 4 2.2.2 Assign SIP Lines.............................................................................................................................. 5 2.2.3 Select the SIP Trunk Provider Type ................................................................................................ 6 2.2.4 Set Up the SIP Trunk Registration................................................................................................... 6 2.2.5 Codec Setup .................................................................................................................................... 7 2.2.6 Assign DID Numbers to your SIP Lines........................................................................................... 7 2.2.7 Fax Setup ........................................................................................................................................ 7 3 Method 2: Broadvox Registration Setup ................................................................................................ 8 3.1 System Router Setup.......................................................................................................................... 8 3.1.1 NAT and SIP.................................................................................................................................... 8 3.1.2 Port Forwarding ............................................................................................................................... 8 3.2 DSX Setup .......................................................................................................................................... 8 3.2.1 Software Level ................................................................................................................................. 8 3.2.2 Assign SIP Lines.............................................................................................................................. 9 3.2.3 Select the SIP Trunk Provider Type .............................................................................................. 10 3.2.4 Set Up the SIP Trunk Registration................................................................................................. 10 3.2.5 Codec Setup .................................................................................................................................. 11 3.2.6 Assign DID Numbers to your SIP Lines......................................................................................... 11 3.2.7 Fax Setup ...................................................................................................................................... 11 Tables
Table 1: Broadvox Static Method Account Information ................................................................................ 4 Table 2: Broadvox Registration Method Account Information...................................................................... 8 NEC Corporation of America
Page 3 of 11
April 23, 2011
DSX
1
Broadvox SIP Trunk Setup
1.05
Overview
The DSX is compatible with Broadvox GO! SIP Trunking. This setup guide summarizes the account
information you will receive from Broadvox and provides step-by-step instructions on how to program that
information into the DSX.
You can set up SIP trunks as standard loop start lines or DID lines. All the feature available with other
types of loop start and DID lines are also available with Broadvox SIP trunk lines. For details on the
features available with loop start and DID lines, refer to the on-line DSX Software Manual at:
http://www.necdsx.com/docs/dita/dsx_v3_complete/index.html
Note: DSX does not currently support T.38 fax and multiple host names.
2
Method 1: Broadvox Static Setup
To set up your GO! SIP Trunking account, contact Broadvox at http://www.broadvox.com. Once your
account is set up they will provide you with the following service information:
Table 1: Broadvox Static Method Account Information
Option
Hostname
DID(s)
2.1
2.1.1
Description
The Hostname is the SIP registration domain for your
Broadvox SIP trunks. When your SIP trunks initially register
they use this domain.
These are the telephone numbers that users will dial to reach
you over your Broadvox SIP trunks.
System Router Setup
NAT and SIP
In the router to which the DSX is connected, enable NAT and disable all special SIP management
features (such as SIP ALG). The DSX router must have a fixed public WAN IP address to use
Broadvox Static Method.
2.1.2
Port Forwarding
Forward UDP ports 5060 and 1024 through 1215 to the DSX system’s IP address.
2.2
2.2.1
DSX Setup
Software Level
3.31.96 or higher.
NEC Corporation of America
Page 4 of 11
April 23, 2011
DSX
2.2.2
Broadvox SIP Trunk Setup
1.05
Assign SIP Lines
1231-01: IP Lines [SYSTEM: PORTS: IP LINES: IP LINE ASSIGNMENT]
The first DSX SIP line is the first line beyond the last assigned line. Each SIP line uses an IP
resource (licensed VoIP port) in DSX. The maximum number of VoIP licenses is 8 in DSX-40 and
16 in DSX-80/160.
Example with DSX-40:
• The first SIP line in a DSX-40 without a COIU expansion card is line 5. Available SIP line
numbers are 5-12.
• With the COIU expansion card installed, the first SIP line is line 9. Available SIP line numbers are
9-16.
• DSX-40 supports a maximum of 8 VoIP licenses. When the total number of licenses are in use,
only Peer-to-Peer calls are available.
Example with DSX-80/160:
• The first SIP line in a DSX-80/160 with a single 8COIU card is line 9. Available SIP lines are 9-17.
• The last line number in DSX-80/160 is 64. In a system with an 8COIU and two T1/PRI cards, this
will limit the available number of SIP lines.
• DSX-80/160 supports a maximum of 16 VoIP licenses. When the total number of licenses are in
use, only Peer-to-Peer calls are available.
1232-01: IP Line Provider Number [SYSTEM: PORTS: IP LINES: IP LINE ASSIGNMENT]
Assign each SIP line in DSX to a provider number (1 or 2). DSX supports up to two providers
simultaneously.
Example: If Broadvox is your only SIP trunk provider, assign all the SIP lines designated in 1231-01
to provider 1.
1232-02: IP Line Username [SYSTEM: PORTS: IP LINES: IP LINE ASSIGNMENT]
1232-03: IP Line Password [SYSTEM: PORTS: IP LINES: IP LINE ASSIGNMENT]
These options are not used with Broadvox SIP trunks using the Static Method.
NEC Corporation of America
Page 5 of 11
April 23, 2011
DSX
2.2.3
Broadvox SIP Trunk Setup
1.05
Select the SIP Trunk Provider Type
1831-01: Provider Number [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2)]
Select the provider number you want to set up. This selection corresponds to the provider number
you assigned to the SIP lines in 1232-01.
Example: If Broadvox is your only SIP trunk provider, and you have chosen provider 1 in 1232-01,
select provider 1 for this option also.
1831-02: Provider Type [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): SERVICE PROVIDER]
Dial 03 to choose Broadvox as the type for the provider selected in 1831-01.
1831-03: Provider Name [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): DESCRIPTION]
The provider name is an optional 18-character entry that describes the provider. Enter any name
you like – the entry does not affect provider setup or registration.
1831-04: Profile [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): PROFILE]
Select the VoIP profile that the system will use when connecting to the SIP trunk provider. The
entry you make here corresponds to the profiles set up in programs 1811-1815. Choose profile 4.
2.2.4
Set Up the SIP Trunk Registration
1832-01: Provider IP Registration [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): SERVER ADDRESS]
Select the provider number you want to set up (see 1831-01) and enter the Table 2 Hostname
entry as it was provided to you by Broadvox. This option uses the text entry method. You should
select a host from the list of servers in your geographical location provided by Broadvox. Do not
select fs.broadvox.net.
1832-02: Registration Type [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): REGISTRATION TYPE]
Choose the IP line registration type. For the Broadvox static method, choose 00: None.
1832-03: Account Username [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): USER]
1832-04: Account Password [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): PASSWORD]
1832-05: Proxy [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): PROXY ADDRESS]
1832-06: SIP Type or Service (ToS) [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): SIP TOS]
1832-07: RTP Type of Service (ToS) [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): RTP TOS]
These options are not used with Broadvox SIP trunks using the Static Method.
NEC Corporation of America
Page 6 of 11
April 23, 2011
DSX
2.2.5
Broadvox SIP Trunk Setup
1.05
Codec Setup
1812: Codecs [SYSTEM: VOIP: PROFILE 4: CODECS]
For Broadvox SIP Trunks, leave Profile 4 at default.
2.2.6
Assign DID Numbers to your SIP Lines
3101-07: Telephone Number [LINES: CONFIG: SETUP: TYPE: PHONE NUMBER]
For each of your SIP lines, enter a telephone number that corresponds to one of the DID numbers
in Table 2. Each line must have a unique entry. This entry is required for both Loop Start and DID
lines.
2.2.7
Fax Setup
1812: Codecs [SYSTEM: VOIP: PROFILE X: CODECS]
1815: DTMF [SYSTEM: VOIP: PROFILE X: PAYLOAD TYPES]
SIP trunks to be used for fax must be set for G.711, 20mS Frame Size, with Inband DTMF. The fax
is transmitted in-band DTMF only.
NEC Corporation of America
Page 7 of 11
April 23, 2011
DSX
3
Broadvox SIP Trunk Setup
1.05
Method 2: Broadvox Registration Setup
To set up your GO! SIP Trunking account, contact Broadvox at http://www.broadvox.com. Once your
account is set up they will provide you with the following service information:
Table 2: Broadvox Registration Method Account Information
Option
Hostname
BTN and Username
Password
DID(s)
3.1
3.1.1
Description
The Hostname is the SIP registration domain for your
Broadvox SIP trunks. When your SIP trunks initially register
they use this domain.
This is the username that Broadvox uses to authenticate your
registration.
The Password is the password required with your BTN and
Username.
These are the telephone numbers that users will dial to reach
you over your Broadvox SIP trunks.
System Router Setup
NAT and SIP
In the router to which the DSX is connected, enable NAT and disable all special SIP management
features (such as SIP ALG).
3.1.2
Port Forwarding
Forward UDP ports 5060 and 1024 through 1215 to the DSX system’s IP address.
3.2
3.2.1
DSX Setup
Software Level
3.31.96 or higher.
NEC Corporation of America
Page 8 of 11
April 23, 2011
DSX
3.2.2
Broadvox SIP Trunk Setup
1.05
Assign SIP Lines
1231-01: IP Lines [SYSTEM: PORTS: IP LINES: IP LINE ASSIGNMENT]
The first DSX SIP line is the first line beyond the last assigned line. Each SIP line uses an IP
resource (licensed VoIP port) in DSX. The maximum number of VoIP licenses is 8 in DSX-40 and
16 in DSX-80/160.
Example with DSX-40:
• The first SIP line in a DSX-40 without a COIU expansion card is line 5. Available SIP line
numbers are 5-12.
• With the COIU expansion card installed, the first SIP line is line 9. Available SIP line numbers are
9-16.
• DSX-40 supports a maximum of 8 VoIP licenses. When the total number of licenses are in use,
only Peer-to-Peer calls are available.
Example with DSX-80/160:
• The first SIP line in a DSX-80/160 with a single 8COIU card is line 9. Available SIP lines are 9-17.
• The last line number in DSX-80/160 is 64. In a system with an 8COIU and two T1/PRI cards, this
will limit the available number of SIP lines.
• DSX-80/160 supports a maximum of 16 VoIP licenses. When the total number of licenses are in
use, only Peer-to-Peer calls are available.
1232-01: IP Line Provider Number [SYSTEM: PORTS: IP LINES: IP LINE ASSIGNMENT]
Assign each SIP line in DSX to a provider number (1 or 2). DSX supports up to two providers
simultaneously.
Example: If Broadvox is your only SIP trunk provider, assign all the SIP lines designated in 1231-01
to provider 1.
1232-02: IP Line Username [SYSTEM: PORTS: IP LINES: IP LINE ASSIGNMENT]
1232-03: IP Line Password [SYSTEM: PORTS: IP LINES: IP LINE ASSIGNMENT]
These options are not used with Broadvox SIP trunks using the Registration Method.
NEC Corporation of America
Page 9 of 11
April 23, 2011
DSX
3.2.3
Broadvox SIP Trunk Setup
1.05
Select the SIP Trunk Provider Type
1831-01: Provider Number [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2)]
Select the provider number you want to set up. This selection corresponds to the provider number
you assigned to the SIP lines in 1232-01.
Example: If Broadvox is your only SIP trunk provider, and you have chosen provider 1 in 1232-01,
select provider 1 for this option also.
1831-02: Provider Type [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): SERVICE PROVIDER]
Dial 03 to choose Broadvox as the type for the provider selected in 1831-01.
1831-03: Provider Name [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): DESCRIPTION]
The provider name is an optional 18-character entry that describes the provider. Enter any name
you like – the entry does not affect provider setup or registration.
1831-04: Profile [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): PROFILE]
Select the VoIP profile that the system will use when connecting to the SIP trunk provider. The
entry you make here corresponds to the profiles set up in programs 1811-1815. Choose profile 4.
3.2.4
Set Up the SIP Trunk Registration
1832-01: Provider IP Registration [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): SERVER ADDRESS]
Select the provider number you want to set up (see 1831-01) and enter the Table 2 Hostname
entry as it was provided to you by Broadvox. This option uses the text entry method. You should
select a host from the list of servers in your geographical location provided by Broadvox. Do not
select fs.broadvox.net.
1832-02: Registration Type [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): REGISTRATION TYPE]
Choose the IP line registration type. DSX IP lines can share the same registration (01: Single) or
have a unique registration for each line (02: Per Line). For Broadvox, choose 01: Single (Common
in the System Administrator).
1832-03: Account Username [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): USER]
Enter the username for your Broadvox SIP trunk account. This option uses the text entry method
and is the BTN and Username entry in Table 2.
1832-04: Account Password [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): PASSWORD]
This option is the password associated with the Account Username assigned in 1832-03. The
password can be up to 24 characters long. This is the Password entry in Table 2.
1832-05: Proxy [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): PROXY ADDRESS]
1832-06: SIP Type or Service (ToS) [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): SIP TOS]
1832-07: RTP Type of Service (ToS) [SYSTEM: VOIP: PROVIDERS: PROVIDER (1 OR 2): RTP TOS]
These options are not used with Broadvox SIP trunks using the Registration Method.
NEC Corporation of America
Page 10 of 11
April 23, 2011
DSX
3.2.5
Broadvox SIP Trunk Setup
1.05
Codec Setup
1812: Codecs [SYSTEM: VOIP: PROFILE 4: CODECS]
For Broadvox SIP Trunks, leave Profile 4 at default.
3.2.6
Assign DID Numbers to your SIP Lines
3101-07: Telephone Number [LINES: CONFIG: SETUP: TYPE: PHONE NUMBER]
For each of your SIP lines, enter a telephone number that corresponds to one of the DID numbers
in Table 2. Each line must have a unique entry. This entry is required for both Loop Start and DID
lines.
3.2.7
Fax Setup
1812: Codecs [SYSTEM: VOIP: PROFILE X: CODECS]
1815: DTMF [SYSTEM: VOIP: PROFILE X: PAYLOAD TYPES]
SIP trunks to be used for fax must be set for G.711, 20mS Frame Size, with Inband DTMF. The fax
is transmitted in-band DTMF only.
NEC Corporation of America
Page 11 of 11
April 23, 2011
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement