Extech Instruments | CT40 | Continuity, Cable Identifiers & Battery Capacity

Continuity, Cable Identifiers & Battery Capacity Tester
CT20 Continuity Tester Pro
One person operation for wire and cable testing both local and remote
• Provides positive continuity checks with bright flashing LED and loud pulsating beeper
• Identify wire pairs and cables remotely using external probe
• Wire verification distance up to 10,000ft (3000m); cable size of 26AWG minimum
• Flashing remote probe - two lead, bi-colored (red/ green) LED probe
allows a single user to identify up to three wires or cables at a time
for correct labeling with only one trip to the other end location
• Great for Electricians and Helpers, Cable TV and Audio System Installers,
Alarm Technicians, HVAC Installers, and Auto Repair Technicians
• Dims: 3.6x2.2x1.14" (90x57x29mm); Wt: 9.2oz (260g)
• 1 year warranty
• Includes Remote probe with bi-colored LED for wire identification highlight
ORDERING
CT20
Continuity Tester Pro
CT40 16-Line Cable Identifier/Tester Kit
Electrical/electronic circuits — identify up to 16 local or remote lines
• CAT III-600V MultiMeter with 7 functions
• Transmitter/Receiver enables one person to remotely identify up to 16 wires
• Transmitter displays two red LED lamps and Receiver two digit blue LED display
• Includes 17 built-in alligator clips with the Transmitter
and 2 built-in alligator clips with the Receiver
• Cable resistance of 30kΩ max
• Wire voltage check from 5 to 16VDC
• Data Hold, Max Hold, Auto power off; Low battery indicator (transmitter/receiver)
• 1 year warranty
• Complete with 16-line Transmitter, MultiMeter/Receiver, batteries, and case
MULTIMETER SPECIFICATIONS
DC/AC Voltage (Basic DCV Accuracy)
0.1mV to 600VDC/ 1mV to 600VAC (±1.0% DCV)
DC/AC Current
0.1μA to 200mA
Resistance
0.1Ω to 20MΩ
Diode/Continuity
Yes
Dimensions/Wt
6.3x2.9x1.7" (162x74.5x44mm)/ 10.8oz (308g)
ORDERING
CT40
16-Line Cable Identifier/Tester Kit
BT100 Battery Capacity Tester
AC milliohmmeter checks Battery Condition in seconds while
the battery is in service
•
•
•
•
•
•
Includes software with
cable, Kelvin alligator
clips, Kelvin test leads,
and 6 AAA batteries
On-line testing without disconnecting battery
Datalogger stores up to 999 tests manually or 9600 sets in continuous mode
Simultaneously measures DC Voltage and AC Milliohms
Long battery life 7 hours; Auto power off to save battery
1 year warranty
Includes Windows® compatible software for downloading readings to a PC
SPECIFICATIONS
RANGE
RESOLUTION
Resistance
40mΩ, 400mΩ, 4Ω, 40Ω
10μΩ, 100μΩ, 1mΩ, 10mΩ
BASIC ACCURACY
±(1% rdg ± 10d)
Voltage
4V, 40V
1mV, 10mV
±(0.1% rdg ±6d)
Max Input Voltage
50VDC
50VDC
Dimensions/ Wt
9.75 x 4 x 1.75" (250 x 100 x 45 mm)/ 17.5oz (500g)
ORDERING
46
BT100
Battery Capacity Tester
BT102
120V AC Adaptor
Indicates products that are available with optional calibration traceable to NIST. See page 144 for a complete listing.
Download PDF