brochure panels en
© Siemens AG 2010
SIMATIC Panels
Operator panels to suit all demands
Brochure · April 2009
SIMATIC HMI
Answers for industry.
© Siemens AG 2010
Totally Integrated Automation
Rely on new productivity standards
for sustained competitive advantages
To be able to respond to the increasing international
competitive pressure, it is more important than ever
to consistently make full use of the potential for
optimization – over the complete lifecycle of a
machine or plant.
2
SystemIntegrated
Totally
features Automation
Optimized processes reduce the total cost of
ownership, shorten the time to market, and improve
quality. This perfect balance between quality, time,
and costs is now, more than ever, the decisive success
factor in industry.
© Siemens AG 2010
Contents
Totally Integrated Automation is optimally aligned to all
requirements and open for international standards and
third-party systems. With its six characteristic system
features (engineering, communications, diagnosis,
safety, security, and robustness), Totally Integrated
Automation supports the complete lifecycle of a
machine or plant. The complete system architecture
offers holistic solutions for every automation segment
on the basis of a comprehensive range of products.
SIMATIC Panels
System features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Operator panels to suit all demands . . . . . . . . . . . . . 6
WinCC flexible
Maximum configuration efficiency
for all applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
SIMATIC Panels – Product range
SIMATIC: more efficient and systematic automation
SIMATIC, a core component of Totally Integrated
Automation, includes a variety of standardized, flexible,
and scalable products – such as SIMATIC Panels presented in this brochure.
SIMATIC Push Button Panels . . . . . . . . . . . . . . . . . . 10
SIMATIC Micro Panels
with the SIMATIC S7-200 . . . . . . . . . . . . . . . . . . . . . 11
SIMATIC Mobile Panels . . . . . . . . . . . . . . . . . . . . . . 12
SIMATIC Basic Panels . . . . . . . . . . . . . . . . . . . . . . . . 15
SIMATIC is currently considered to be the global number one in automation. One of the decisive reasons for
this is that SIMATIC exhibits the six system features of
Totally Integrated Automation:
• Engineering
• Communication
• Diagnosis
• Safety
• Security
• Robustness
In addition, SIMATIC features two additional system
features:
• Technology
• High availability
SIMATIC Panels – 70 series . . . . . . . . . . . . . . . . . . . 16
SIMATIC Panels – 170 series . . . . . . . . . . . . . . . . . . 17
SIMATIC Panels – 270 series . . . . . . . . . . . . . . . . . . 18
SIMATIC Multi Panels – 170/270/370 series . . . . . . 19
SIMATIC Thin Clients . . . . . . . . . . . . . . . . . . . . . . . . 21
SIMATIC Panels with stainless steel front . . . . . . . . 22
Fully protected HMI devices. . . . . . . . . . . . . . . . . . . 23
Customer-specific solutions. . . . . . . . . . . . . . . . . . . 24
Accessories, starter and promotion packages
Accessories for SIMATIC Operator Panels . . . . . . . . 25
SIMATIC Panels starter packages . . . . . . . . . . . . . . . 26
You can find more about the system features and the
resulting advantages in the following chapter "System
features".
The new SIMATIC HMI promotion packages . . . . . . 27
Totally Integrated
Automation
System
features
3
© Siemens AG 2010
System features
Engineering
Maximum engineering efficiency –
in all phases of the lifecycle of the machine and plant
With SIMATIC you rely on an integrated engineering environment. Efficient software supports
you over the complete lifecycle of your machine or plant – from the planning and design
stages through configuring and programming as far as commissioning, operation and
upgrading. With its integration capability and harmonized interfaces, SIMATIC software
supports a high degree of data consistency – throughout the entire engineering process.
Communications
Maximum data transparency on all automation levels –
based on proven standards
SIMATIC creates the foundations for unlimited integration in communication – and thus for
maximum transparency on all levels, from the field and control level to the operations
management level all they way up to the corporate management level. SIMATIC relies on
international, cross-vendor standards which can be combined flexibly: PROFIBUS, the global
No. 1 fieldbus, and PROFINET, the leading Industrial Ethernet standard.
Diagnosis
Minimization of downtimes –
through efficient diagnosis concepts
All SIMATIC products feature integrated diagnostic functions with which a fault can be
identified and eliminated to provide increased system availability.
Even with larger plants, the Maintenance Station provides you with a uniform view of the
maintenance-relevant information of all automation components.
Safety
Protection of personnel and machines –
within the framework of an integrated complete system
SIMATIC Safety Integrated offers TÜV-certified products, which facilitate compliance with
relevant standards: IEC 62061 up to SIL 3, EN ISO 13849-1 up to PL e, as well as EN 954-1.
Due to the integration of safety technology in standard technology, only one controller,
one I/O, one engineering, and one bus system are required. Thus the system advantages
and comprehensive functionality of SIMATIC are also available for fail-safe applications.
4
System features
© Siemens AG 2010
Security
Data security in the networked world – through harmonized, scalable
security systems
With SIMATIC you can use all the advantages that result as the worlds of automation and
office grow together more and more: Seamless exchange of data across all levels
(Collaborative Manufacturing), or access to production data via the Internet from any
location. In order to meet the resulting increased security requirements, SIMATIC offers
you IT Security for the protection of production and data, e.g. by means of firewall functions,
access protection, encryption, and Virtual Private Networks.
Robustness
Maximum industrial suitability – through increased robustness
Each standard product from the SIMATIC range is characterized by the highest quality and
robustness and is perfect for use in industrial environments. Specific system tests ensure the
planned and required quality. SIMATIC components meet all relevant international standards
and are certified accordingly. Temperature and shock resistance are defined in the SIMATIC
quality guidelines, as are vibration resistance or electromagnetic compatibility.
For demanding to extreme rated conditions, special versions such as SIPLUS extreme or special versions of SIMATIC ET200 are available. These include an increased degree of protection,
extended temperature ranges, and exceptional environmental stress.
Technology
More possibilities, less complexity –
through integrated technology functionality
Counting and measuring, cam control, closed-loop control, or motion control: You can
integrate technological tasks in many different combinations and with various degrees of
complexity without a system changeover into the world of SIMATIC – easily, conveniently,
consistently.
Parameter assignment and programming are implemented in the familiar STEP 7
environment.
High availability
Maximum availability –
with integrated high availability concepts
Siemens offers a comprehensive high availability concept to ensure high availability
for the entire plant: from the field level to the control level all the way up to the management
level. For example, field-tested controllers ensure high availability through bumpless
switching with automatic event synchronization.
www.siemens.com/simatic-system-features
System features
5
© Siemens AG 2010
SIMATIC Panels
Operator panels to suit all demands
SIMATIC Panels have been proving their value in many different applications in all industrial sectors for many years
now. Their innovative power is undiminished here.
With SIMATIC Panels, you have absolute control over even the
most complex processes, which increases the availability and
productivity of your plant. SIMATIC Panels provide the interface between man and machine and offer maximum transparency.
The product range includes versions for all industrial applications: from a simple operator keypad to mobile and stationary
panels and all the way to the flexible Multi Panel. Devices with
PROFINET connection are used for solutions that utilize the
Industrial Ethernet standard for automation. Devices with
complete IP65 protection can be located on supporting arms
or stands – wherever is best for the operator.
Rugged for use at the machine level
With IP65/NEMA 4 degree of protection on the front side, high
EMC and extreme vibration resistance, the SIMATIC Operator
Panels are ideally suited for use at the machine level in harsh
industrial environments. Approvals for many different sectors/applications are the proof.
(www.siemens.com/simatic/zertificates)
Selection of possible operating modes
SIMATIC Panels are available as Key or Touch panels.
Some even offer both at the same time.
Everything at a glance on brilliant displays
All SIMATIC Panels have large, bright and high-contrast displays for optimal operator control and monitoring. Whether
text-based or pixel-graphics, color or monochrome, with display sizes of 3 to 19" – now also in 4" widescreen format – the
long service life of the backlighting convinces in every case.
Diverse connection options
As standard, SIMATIC Panels communicate over PROFIBUS.
PROFINET/Ethernet are gaining importance. Most SIMATIC
Panels are already prepared for this. Other devices, such as
printers, can be connected through additional interfaces such
as USB.
The software: integrated and scalable
SIMATIC Panels are configured with an integrated software
tool: SIMATIC WinCC flexible. WinCC flexible is scalable to
match the different performance levels of the panels.
SIMATIC Operator Panel series
Push
Button
Panels5)
Mobile
Stationary
Micro Panels
TD
6)
70 series
●
●
●
●
●
●
Mobile Panels
170 series
5)
Basic Panels5)
170 series
270 series
●
●
●
●
Operation
Touch
Key
Touch and Key
●
●
●1)
●1)
●
●
●
●
Display
TFT
STN
●
●
●
●
●
●
●
Interfaces
PPI
PROFIBUS
PROFINET/Ethernet
USB
●
●3)
●
●1)
●3)
●1)
●
●1)
●4)
●1)
●
●
HMI functionality
Signaling system
Recipes
Archive
Visual Basic scripts
Software options
●2)
●
If you are looking for exactly the right operator panel for your application,
we recommend you use the SIMATIC HMI selection guide.
You can find it at: www.siemens.com/simatic-hmi
with the most up-to-date product range.
6
SIMATIC Panels
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Feature always available
Feature available in the devices of the upper performance range of the
series
© Siemens AG 2010
Perfectly suited for worldwide use
Approvals for the most important export countries are available. In addition to the standard version of WinCC flexible with
five configuration languages (German, English, French, Spanish, and Italian), there is also a version for Asia with four Asian
languages. Multilingual configuration is supported by automated text translation and text export and text import functions. Up to 32 languages can be administered in one project.
Highlights of SIMATIC Panels
■
Integrated configuration, data management, and
communication
■
Designed for harsh industrial environments
– Rugged and compact
– Safe and ergonomic operation by means of
keypads or touch screens
– Brilliant displays for best readability
■
Open and easy to extend
– Cross-manufacturer OPC communication
– (OPC server) for Multi Panels
– Controllers from the most diverse manufacturers
can be connected
– TCP/IP via PROFINET/Ethernet
– Innovative HMI concepts: Traceability/easy validation, service and diagnostics via the Internet
– Worldwide application with extensive language
support, including Asian languages
■
Proven Siemens quality
Open for a wide variety of automation systems
Different interfacing options for SIMATIC S7, drivers for nonSiemens controllers, and vendor-independent communication over OPC ensure the correct connection for many different automation solutions.
Embedded Automation on the basis of SIMATIC Multi
Panels
Embedded Automation stands for control solutions specially
tailored to embedded operating systems and which utilize
rugged diskless devices without fans as hardware. SIMATIC
Multi Panels support Embedded Automation in a special way:
With an integral display, they allow HMI functions as well as
controller functions in a single device.
SIMATIC Basic Panels
For small machines or simple applications: Basic Panels offer
basic functionality at an attractive price.
Panels
Multi Panels
70 series5)
170 series5)
270 series5)
170 series5)
270 series5)
370 series5)
●
●
●
●
●
●
●1)
●1)
●
●
●1)
●1)
●1)
Mobile
Stationary
Operation
●
●1)
●
Touch
Key
Touch and Key
Display
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
TFT
STN
Interfaces
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
PPI
PROFIBUS
PROFINET/Ethernet
USB
HMI functionality
●
1)
●
●
As device version
2) Via integral LEDs
3) Only Mobile Panel 277, but not Mobile Panel 277F IWLAN and 277 IWLAN
4)
Mobile Panel 277 IWLAN via WLAN
Signaling system
Recipes
Archive
Visual Basic scripts
Software options
5)
As SIPLUS extreme component, also for corrosive atmosphere/
condensation (www.siemens.com/siplus-extreme)
6) As SIPLUS extreme component also for an extended temperature range
(-25 °C ... +60 °C) and corrosive atmosphere/condensation
(www.siemens.com/siplus-extreme)
SIMATIC Panels
7
© Siemens AG 2010
WinCC flexible
Maximum configuration efficiency for all applications
The WinCC flexible engineering software allows integrated configuring of all SIMATIC Operator Panels right up
to PC-based visualization workstations.
WinCC flexible stands for maximum configuring efficiency:
Libraries with off-the-shelf objects, re-usable faceplates, intelligent tools right up to automated text translation in the case
of multi-language projects. WinCC flexible is available in different versions graded according to price and performance.
They are based on each other and are optimally tailored to the
individual classes of operator panels. The larger software
package always includes the configuration options of the
smaller package. Existing projects can simply be reused.
Minimizing configuration costs by means of function block
technology
Reusable objects can be centrally stored in a structured format
in libraries. Part of WinCC flexible is a large number of scalable
and dynamically variable objects for creating faceplates.
Changes to the faceplates only have to be performed at one
central location. They then become effective wherever the
faceplate is used. This not only saves time, but also ensures data
consistency.
Highlights of SIMATIC WinCC flexible
■
Innovative configuration interface based on the
latest software technologies
■
Function block libraries: Variable blocks are freely
definable and reusable, and they can be modified
centrally
■
Dynamic faceplates
■
Intelligent tools, such as screen navigation
■
You can graphically configure motion objects
and conveniently configure bulk data
(e.g. tag editor), etc.
■
Access protection with user ID and password
■
Recipe management
■
Report system
■
Language support for worldwide use:
– Manage 32 languages in one project
– Text library for multilingual texts and
automatic translation
– Simple import/export of texts for
translation
■
Individually expandable with options:
– [email protected] Client/Server concepts
– Service and diagnostics over the Internet
– OPC server communication
– Process diagnostics
– Logging and tracking of
operator actions and configurations
Intelligent tools for efficient configuration
Table-based editors simplify the generation and processing of
similar types of object, e.g. for tags, texts or messages. Complex configuration tasks such as the definition of motion paths
or the setup of the fundamental operator prompting system
are simplified by means of graphical configuration.
Real-time operation through PROFINET IO
The new SIMATIC Panels of the 170 and 270 series also support real-time capable PROFINET IO. Thus time-critical conditions, e.g. as implemented over PROFIBUS by means of the DP
direct keys, are now also possible based on Industrial Ethernet.
Operating and display options
Visualization for WinCC flexible is performed using a Windowscompliant user interface with parameterizable screen objects as
well as technological faceplates.
Alarms
Alarms can be generated in WinCC flexible as discrete alarms,
analog alarms, and alarms by means of the Alarm_S message
frame alarm procedure with SIMATIC S7. User-defined alarm
classes can be used to define acknowledgement functions and
the visualization of alarm classes.
Logs and reports
WinCC flexible permits time and event-driven output of logs
and reports. The layout can be freely selected.
8
WinCC flexible
© Siemens AG 2010
Password protection
Access protection can be activated, if required. Administrators
can create user groups who have specific privileges.
Logging of process data and alarms
Process value and alarm archiving with WinCC flexible/
Archives is used to record and evaluate process data. Process
sequences are documented, the capacity utilization or the
quality of products is monitored and recurring fault conditions
are logged.
Management of recipes
WinCC flexible/Recipes is used to manage recipes which contain associated machine or production data.
Flexibly expandable via options
Remote maintenance simplifies service and support
The option WinCC flexible/[email protected] permits access to the
PROFINET/Ethernet-compatible Panels and Multi Panels from a
PC via Internet Explorer.
An e-mail can also be sent automatically from the operator
panel to the maintenance personnel via an SMTP (Simple Mail
Transfer Protocol) server. When using an e-mail/text message
gateway, access is gained to standard networks and, in critical
situations, a text message can be sent to a mobile phone.
Client/server functionality and plant-wide data exchange
With the WinCC flexible/[email protected] option, PROFINET-compatible Panels and Multi Panels communicate with each other
over PROFINET/Ethernet or the intranet/Internet.
Process error diagnostics for increased plant availability
WinCC flexible/ProAgent permits specific process diagnostics
for machines and plants which are controlled by SIMATIC S7.
In the case of a process fault, ProAgent acquires information
about the location and cause of the fault and supports troubleshooting.
Traceability and easy validation
The WinCC flexible/Audit option covers essential requirements
outlined by GMP (Good Manufacturing Practice) and the FDA
(Food and Drug Administration) in accordance with 21 CFR
(Code of Federal Regulations), Part 11, for applications subject to validation in the pharmaceutical industry.
The creation of new versions and tracking of changes
Any change to the configuration can be recorded and assigned a version number with the WinCC flexible/Change Control option. This fulfills the GMP requirements with respect to
change control.
OPC for vendor-independent communication
With the WinCC flexible/OPC server option, the Multi Panels
are capable of communicating with every OPC-compatible application (e.g. MES, ERP, or office applications) via Ethernet using TCP/IP.
WinCC flexible
9
© Siemens AG 2010
SIMATIC Push Button Panels
The innovative operator panels
SIMATIC Push Button Panels can be used for creating conventional operator panels according to the principle of
"plug and control": They are ready for installation and preassembled. In this way, time-consuming individual assembly and wiring, as required for conventional operator panels, is not necessary. This reduces the time required for
wiring by up to 90 % compared to conventional wiring. All
that is required is the corresponding installation cutout
and a bus cable (PROFINET, PROFIBUS DP, or MPI) for connection to the controller.
Highlights of the SIMATIC Push Button Panels
SIMATIC Push Button Panels can be connected via:
• PROFINET
• PROFIBUS DP as standard slave with up to 12 Mbit/s to any
DP master (including third-party masters)
• MPI to SIMATIC S7-200/-300/-400
(does not apply to PP17-I PROFIsafe)
■
Preassembled short-stroke keys with long-life
multicolored surface LEDs
■
All keys can also be used as individual switches
■
Integrated flashing frequencies and adjustable signal
extension
■
Up to 16 DI/16 DO onboard for flexible expansions,
e.g. for keys or lamps
■
Perforated 22.5 mm cutouts for integrating standard
elements, e.g. buttons, lamps, emergency stop or
key-operated switches
■
Slide-in labels for individual labeling
■
Can be installed next to and combined with SIMATIC
Panels
■
Central enable input
■
Service-friendly
– Maintenance-free, because it needs no battery
– Permanently integrated test functions, such as the
lamp test
1)
PP17-I PROFIsafe
Push Button Panel with 16 illuminated short-stroke keys and
free, digital inputs and outputs, supplemented with fail-safe
input channels (F-DI) for simple emergency stop applications.
With the help of the integrated PROFIsafe communication, the
operator panel can be used for fail-safe operation with
SIMATIC S7-F-CPU 300/400 for simple emergency stop applications. Up to 2/4 two-channel emergency stop buttons can be
connected. The safety-relevant signals can achieve SIL3/Category 4 (with PROFIBUS) or SIL3/PL e, Category 3 (with
PROFINET). The external dimensions and installation cutout
are the same as for the PP17-I.
Additionally with PP17-I PROFIsafe
1)
Push Button Panels, PP17-I and
PP17-II
10
SIMATIC Push Button Panels
PP17-I PROFIsafe – installed in
the operator station
■
1 to 4 F channels for emergency stop with PROFIBUS,
1 to 2 F channels for emergency stop with PROFINET
■
Up to 14 free digital inputs (depends on the number
of connected emergency stop buttons) with
PROFIBUS, 16 free digital inputs with PROFINET
■
Up to 14 free digital outputs (depends on the number
of connected emergency stop buttons) with PROFIBUS, 8 free digital outputs with PROFINET
Push Button Panels are also available in a SIPLUS extreme version for
extreme environmental conditions (e.g. use in corrosive atmosphere/
with condensation). Further information:
www.siemens.com/siplus-extreme
© Siemens AG 2010
SIMATIC Micro Panels
Simple and low-cost operator control with the SIMATIC S7-200
The S7-200 micro system is compact, modular, and has a
variety of communication ports. For this reason, it is suitable
for many diverse automation tasks. The Micro Panels are optimally adapted to the performance and applications of the
S7-200.
They are available as text displays which are configured with
SIMATIC Micro/WIN, but also as operator panels and touch
panels with graphic displays configurable with WinCC flexible.
The device range at a glance
SIMATIC TD 100C
■
FSTN display, 4 lines
■
14 freely configurable
keys
■
The layout of the user
interface is freely configurable
■
Display of message texts
The Touch Panel TP 177micro has a 5.7'' STN display with 4
blue levels and a touch screen. Vertical (portrait) setup offers
additional display options for process screens.
Coupling options
The SIMATIC Micro Panels are connected to the S7-200 with a
standard MPI or PROFIBUS cable. In addition, multi-master
communication, e.g. for connection to networks, is possible.
The device range at a glance
TD 400C2)
■
LC display with 4 lines of
24 characters each
■
15 freely configurable keys
■
The layout of the user
interface is freely configurable
■
Press of a button with tactile,
audible or visual feedback
Devices that can be configured using WinCC flexible
SIMATIC TD 2001)
■
LC display, 2 rows
■
8 freely configurable
keys, 5 system keys
■
Display of message texts
SIMATIC TD 200C1)
■
LC display, 2 rows
■
20 freely configurable keys
■
The layout of the user
interface is freely configurable
■
SIMATIC OP 73micro
■
Pixel graphics 3'' display
■
4 freely configurable
keys, 8 system keys
SIMATIC TP 177micro
■
Pixel graphics 5.7'' display
■
Touch screen
■
Vertical installation possible
■
Further graphics options
through vector graphics
■
Trend display
Display of message texts
1)
As SIPLUS extreme component also for an extended temperature range
(-25 °C ... +60 °C) and corrosive atmosphere/condensation
(www.siemens.com/siplus-extreme)
2)
As SIPLUS extreme component also for an extended temperature range
(-10 °C ... +60 °C) and corrosive atmosphere/condensation
(www.siemens.com/siplus-extreme)
Detailed information on Micro Panels can be found at:
www.siemens.com/micropanels
SIMATIC Micro Panels
11
© Siemens AG 2010
SIMATIC Mobile Panels
Maximum mobility for operator control and monitoring
Regardless of the industry or application, if mobility is required for on-site control and monitoring of machines and
plants, mobile panels offer some crucial advantages: The
machine operators or commissioning engineers are able
to work exactly where they have the best view of the
workpiece or process.
Highlights of the Mobile Panels
■
Rugged design for industrial use
■
Ergonomic, compact and light-weight
■
Flexible thanks to hot swapping
■
Insertion and removal without interrupting the
emergency stop circuit (with Plus connection box)
■
Reliable operation with sophisticated safety concept
■
Connection point detection
■
Integrated interfaces: Serial, MPI, PROFIBUS or
PROFINET/Ethernet
■
Short device startup time after docking
New: Device with 10" touch display for clear representation of complex
process mimics
Reliable and secure operation
Compact and ergonomic design
Operation takes place intuitively via the touch screen or membrane keys, which provide perceptible and thus reliable feedback – even when the operator is wearing gloves.
With its low weight and handy, compact structure, the Mobile
Panel is easy to handle. It permits different holding and gripping positions and can be easily operated for longer periods
both by right-handed and left-handed people.
Rugged design for industrial use
Thanks to the double-walled structure and the rounded casing, SIMATIC Mobile Panels are extremely shock-resistant. For
example, they can survive a fall from a height of more than one
meter without damage. The STOP button in particular is protected with a "protective collar". This minimizes the possibility of unintentional triggering of the safety function or the risk of damage
when the device is dropped. SIMATIC Mobile Panels are completely dust-proof and splash-proof (IP65 degree of protection).
The high requirement for ruggedness also comprises the connection box and cable.
For time-critical operation and control processes with very
short response times the membrane keys and touch screen
can also be connected directly to the distributed I/O. Even the
additional control elements can be configured as direct keys.
With the optional wall bracket, the Mobile Panel can be securely stored or used as a stationary terminal.
Innovative connection solutions
The Mobile Panel is simply plugged into the connection box
wherever it is needed on the machine and is immediately
ready for use. The rugged and safe connection box with IP65
degree of protection can be mounted anywhere, even outside
the control cabinet. It ensures fault-free hot-swapping.
Fast device startup
The Mobile Panels are characterized by a fast device startup after
plugging them into the connection boxes. By using an optional battery pack, the startup time of the Mobile Panel – after a
short period of separation from the connection box – can
again be significantly reduced.
Mobile Panel 177 (left) or 277 (right) – the right model for every application – also with PROFINET/Ethernet connection
12
SIMATIC Mobile Panels
© Siemens AG 2010
Connection point detection
The SIMATIC Mobile Panel can be configured such that the
user interface changes according to the connection point. The
connection point is clearly detected when the Mobile Panel is
plugged into the connection box. This enables machine-specific
HMI authorizations or actions to be performed depending on
the selected connection point.
Integrated interfaces
Mobile Panels are available with PROFIBUS and PROFINET/
Ethernet connection. The connecting cable can be up to 25
meters long. The interfaces are already integrated and a variety of drivers – even for non-Siemens PLCs – are also included
in the scope of supply. The PROFINET connection boxes can be
connected in series with integrated switches.
STOP and acknowledgement buttons are designed with dual
circuits according to the safety regulations (EN 60204-1). This
means it is possible to achieve Safety Category 3 according to
EN 954-1.
Connection at one point of the machine
The "Basic" connection box is used for connecting SIMATIC Mobile Panels with STOP button to one point of the plant. The disconnection of the device in this case causes an opening of the
emergency stop circuit and thus triggers the emergency stop.
Variable connection to different stations of a machine or
plant
If you use a Mobile Panel with STOP button together with a
"Plus" connection box, a configuration can be set up in which
the Mobile Panel can be used at different connection points.
Sophisticated safety concept
SIMATIC Mobile Panels offer the option of making safety functions available on a mobile basis at any point of a machine or
plant. They have two acknowledgement buttons which ensure the protection of personnel and machines in critical situations (dead man's switch). The acknowledgement buttons
are integrated into the handle on the back.
Device models with an additional STOP button can be wired
into the emergency stop circuit of a machine or plant by means
of the connection boxes.
In this way, the STOP button offers the functionality of an
emergency stop button, but differs visually from conventional
emergency stop devices due to its gray color to avoid confusion.
When the Mobile Panel is connected, the device is looped into
the emergency stop circuit. The emergency stop circuit remains closed regardless of whether the Mobile Panel is
plugged in or disconnected. If the Mobile Panel is disconnected during operation, the emergency stop circuit in the Plus
connection box is automatically closed which prevents triggering of the emergency stop circuit.
The Plus connection box is also available in a SIPLUS extreme
version for extreme environmental conditions (e.g. use in corrosive atmosphere/with condensation).
Further information: www.siemens.com/siplus-extreme
$XWRPDWLFFORVLQJRIWKH(PHUJHQF\6WRSFLUFXLWE\FRQQHFWLRQER[3OXV'3RU31
0RELOH3DQHOSOXJJHGLQ
(PHUJHQF\6WRSFLUFXLWFORVHG
0RELOH3DQHOGLVFRQQHFWHG (PHUJHQF\6WRSFLUFXLWFORVHG
352),1(7
352),%86
03,
&RQQHFWLRQER[
3OXV'3RU31
0RELOH3DQHO
ZLWK6723EXWWRQ
*B67B;;B
(PHUJHQF\6WRSFLUFXLW
Variable connection to different stations, using the Mobile Panel 177 on the PROFIBUS as an example
SIMATIC Mobile Panels
13
© Siemens AG 2010
Maximum mobility in operator control and monitoring –
wireless and with complete safety functionality
The SIMATIC Mobile Panel 277(F) IWLAN is a worldwide
novelty in the field of operator control and monitoring: a
wireless operator panel with full HMI functionality. Two
versions are available: one device for wireless operator
control and monitoring without safety functionality and
one with safety functionality. In addition there is the option of using the SIMATIC Mobile Panel 277 (F) IWLAN for
SIMOTION applications as well.
PROFIsafe
2
1
Certified safety
3
The suitability of the device for particularly high safety requirements was tested and certified by TÜV (SIL 3). The necessary radio approvals already exist for worldwide use.
Definite effective ranges
The SIMATIC WinCC flexible engineering software can be used
to define ranges from which the machine with acknowledgement buttons can be operated. Within these "effective ranges", the device is identified by means of transponders or in an
additional version by means of economical RFID tags (Moby D
smart cards). This ensures reliable operation and the clear assignment of suitable operating screens and operator authorizations from any point in the plant.
Location-dependent behavior can also be defined for the
SIMATIC Mobile Panel 277 IWLAN (without safety function).
Here the transponder can generate zones where specific functions are configured, e.g. an automatic screen display or operator authorizations for specific persons.
Rugged for tough industrial environments
With its IP65 degree of protection and a drop height of over
one meter, the device can be optimally used in tough industrial environments. The powerful batteries can be replaced without interrupting operation. This ensures trouble-free operation.
2
1 Access point as network gateway from WLAN to the PROFINET
2 WLAN area in which communication with the SCALANCE W access point
is possible
3 Mobile Panel in the effective range/zone
Fail-safe operation of the plant with the acknowledgement
buttons only becomes possible when the operator panel is
logged on in an effective range (defined by transponders or RFID
tags) within the WLAN area. Due to its high safety standard, the
device satisfies safety category SIL 3.
Rapid Roaming
The Mobile Panel 277F IWLAN communicates by means of the
extended WLAN access procedure iPCF-MC (industrial point
coordination function with management channel). This procedure – also known as "rapid roaming" – ensures uninterrupted handover of the wireless signals between the individual access points.
WLAN area and effective range
The WLAN area is the area in the plant where the operator
panel communicates with an access point over a wireless local
area network.
As soon as the PROFIsafe communication between the controller and operator panel is established in the WLAN area, the
emergency stop button on the operator panel becomes active.
Mobile Panel 277F IWLAN (left) and 277 IWLAN (right)
14
SIMATIC Mobile Panels
G_ST80_XX_00393
The SIMATIC Mobile Panel 277F IWLAN has two acknowledgement buttons and one emergency stop button. A fail-safe
SIMATIC F-CPU must be used to be able to utilize the safety
functions. For industrial systems, the use of SIMATIC Industrial
Wireless LAN is recommended.
© Siemens AG 2010
SIMATIC Basic Panels
Low-cost operator control and monitoring for simple applications
The process quality can be significantly improved with visualization even in the case of small machines or simple
applications. Despite this, however, the human machine
interface option has until now frequently remained unused for cost reasons.
Highlights of the Basic Panels
■
Field-proven SIMATIC quality
■
Ideal for simple visualization tasks
The new SIMATIC Basic Panels offer HMI basic functions at an
attractive price and thus open up new possibilities for mechanical engineering.
■
Displays with touch functionality for intuitive operator
control
■
Freely configurable keys with tactile feedback
Clear representation on high-contrast color displays
■
Versions for connecting to PROFINET/Ethernet and
PROFIBUS
■
Upward-compatible WinCC flexible projects
■
Installation-compatible with SIMATIC Panels and
Multi Panels
SIMATIC Basic Panels are available with 4" to 15" touch displays for intuitive operator control. Most devices also have
freely configurable keys with tactile feedback. With an IP65
degree of protection, Basic Panels are also suitable for use in
harsh environments.
Integral functionality
The software functions are independent of the display size:
Signaling system, recipe management, trend curve functionality, and language switching are available in all cases.
Different communication options
The Basic Panels communicate as standard using PROFINET/
Ethernet or PROFIBUS.
Upgradability is ensured
Basic Panels are configured with WinCC flexible. Existing
projects can thus be transferred to another SIMATIC Panel, Multi
Panel or also to a PC, in the event of an upgrade. The matching
installation cutouts of Basic Panels, Panels and Multi Panels
make it possible to equip the same machine with the level of
HMI functionality desired by the customer, or to change from
one Basic Panel to a more powerful SIMATIC Operator Panel at
a later time.
Operating and monitoring of microcontrollers
The new SIMATIC STEP 7 Basic engineering system allows integrated engineering for the new S7-1200 microcontrollers
and Simatic HMI Basic Panels. Simatic Step 7 Basic V10.5 with
integrated WinCC Basic for visualization tasks supports the
user with task-oriented and intuitive editors for a high degree
of operator-friendliness and efficiency in engineering.
SIMATIC Basic Panels
15
© Siemens AG 2010
SIMATIC Panels – 70 series
Low-cost operator control using rugged keys
The SIMATIC Panels of the 70 series1) are the low-cost entry-level devices in the range of graphics-capable operator
panels. They are ideally suited to small-scale HMI tasks.
The pixel-graphics display can be used for the graphical display of the processes using, for example, bit maps or bar
graphs. The font size can be varied to achieve excellent readability even from a distance. Symbols or text can be used for labeling the function keys. This enables intuitive user interfaces
to be created and saves translation work.
■
3" or 4.5" pixel graphics displays also support
bitmap and bar displays
■
Compact, space-saving design (installation cutout
as for the predecessor versions OP3 or OP7)
■
MPI and PROFIBUS onboard
■
5 online languages, also Asian and Cyrillic characters
Connection to controller
■
Graphical labeling of soft keys possible
The OP 73 and OP 77A/B can be connected to SIMATIC S7-200/
-300/-400. The OP 73micro version has been specially designed for SIMATIC S7-200. Drivers for interfacing to a range
of different controllers are also available for the OP 77B. The necessary interfaces are already onboard.
■
Three devices are available:
• SIMATIC OP 73 Operator Panel with 3" graphics display
(160 x 48 pixels)
• SIMATIC OP 77A and OP 77B Operator Panel with 4.5"
graphics display (160 x 64 pixels)
As the most powerful panel in the 70 series, the OP 77B includes simplified data handling and more communication options than the OP 73 and OP 77A.
Simple data handling for OP 77B
Using a generally available Multi Media Card, the memory
available for recipe data and project back-up can be expanded
significantly with the OP 77B. The recipes can be stored
in standard format (CSV) for further processing in the PC using, for example, Excel. Back-up and restore functions for the
complete project allow panels to be replaced easily in the
event of a fault, for example.
1)
16
Highlights of the SIMATIC Panels of the 70 series
Panels of the 70 series are also available in a SIPLUS extreme version for extreme environmental conditions (e.g. use in corrosive atmosphere/
with condensation). Further information:
www.siemens.com/siplus-extreme
SIMATIC Panels – 70 series
New powerful functions, e.g. comprehensive alarm
concept with freely-definable alarm classes
Additional communication options for OP 77B
The OP 77B features a USB interface for connecting a printer
or downloading a project.
The project can also be loaded to the device over the RS 232
interface or from a central location via MPI or PROFIBUS. Remote download of the configuration, for example, via a modem or with SIMATIC TeleService saves money and time during servicing.
© Siemens AG 2010
SIMATIC Panels – 170 series
The all-rounders with comprehensive basic functionality
The Touch Panels and Operator Panels of the 170 series1)
have proved themselves for operator control and monitoring of small applications. The performance capability of
the devices is scalable. These higher-quality devices have
a retentive message buffer, and the color devices also
have a PROFINET/Ethernet interface.
TP 177A highlights
SIMATIC TP 177A – Operator control and monitoring at a
favorable price
The Touch Panel TP 177A stands out due to its especially favorable price/performance ratio. It facilitates the use of graphics-capable operator panels with intuitive touch operation, even for
small projects and on low budgets.
■
Pixel-graphics 5.7" STN display, blue mode (4 levels)
■
Vertical (portrait) installation possible
(resolution 240 x 320 pixels)
■
Signaling system with freely definable message classes
(status/fault messages) for defining acknowledgment
behavior and presentation of the alarm events
■
Vector graphics, plots
■
Functions for switches, indicator lamps, password protection, displays, bar charts, input and output fields,
predefined texts, etc.
■
Recipes
■
Long service life of the backlighting
TP 177B and OP 177B highlights
SIMATIC TP 177B and OP 177B – intuitive and innovative
The TP 177B and OP 177B are available with 4 blue mode or
256-color STN displays. The OP 177B with additional, rugged
membrane keyboard has been designed for applications that
cannot do without mechanical keys. The function keys can additionally be configured as system keys as desired. As a special
feature, the OP 177B also has a touch display.
■
Choice between touch or key operation.
OP 177B combines touch and key operation
■
Non-volatile message buffer (without battery, therefore maintenance-free)
■
Function keys can be assigned system key functions
and configured as direct keys
■
2 Mbyte user memory plus additional integral recipe
memory
■
12 Mbyte onboard PROFIBUS interface
■
Color versions feature an additional PROFINET/
Ethernet interface
■
Interface for standard Multi Media Card
■
USB interface, e.g. for printer connection
TP 177B 4" highlights
The TP 177B with a 4" display in widescreen format is a new
addition. It is characterized by compact installation dimensions, despite which it still offers around a third more visualization surface than comparable devices on the market.
1)
■
4.3" TFT touch display with 256 colors in widescreen
format 16: 9 (480 x 272 pixels): improved display
options in minimum space
■
Combination of touch display and tactile keys
■
PROFIBUS and PROFINET at an especially favorable
price
■
Dimmable backlighting (20 to 100 %)
Panels of the 170 series are also available in a SIPLUS extreme version for
extreme environmental conditions (e.g. use in corrosive atmosphere/
with condensation). Further information:
www.siemens.com/siplus-extreme
SIMATIC Panels – 170 series
17
© Siemens AG 2010
SIMATIC Panels – 270 series
The universal devices with high-contrast TFT displays
Based on the Windows CE operating system, the devices of
the 270 series1) offer innovative operator control and monitoring combined with the tried and tested advantages of
the Operator Panels and Touch Panels: Ruggedness, stability and simple handling.
A number of options for innovative automation and operator
concepts can be utilized during configuration with WinCC flexible. Standard hardware and software interfaces ensure more
flexibility and openness and access to the office world. Archive data, for example, can be loaded directly into Excel and
then processed further.
TP/OP 277 highlights
■
Standard interfaces for more flexibility
- Multi Media Card Slot for memory expansion or additional interfaces
- PROFINET/Ethernet interface
- Integrated USB interface for connection of I/O devices
which are approved for Windows CE (keyboard, mouse,
printer)
■
Retentive data memory
■
Standard Windows CSV file format for further processing of the data with standard tools
■
Visual Basic scripts
■
Archives, recipes
SIMATIC TP 277
The SIMATIC Touch Panel TP 277 for operator control and
monitoring at the machine level is available with a brilliant 6"
TFT display. In addition to its optimized performance, the devices also features USB, MPI/DP, and PROFINET/Ethernet interfaces. The 4 MB user memory can be expanded for archives
and recipe data by means of the Multi Media Card slot.
SIMATIC OP 277
Das SIMATIC OP 277 Operator Panel is operated by means of a
membrane keyboard, otherwise it has the same functionality
as the TP 277.
1)
TP/OP 277 Panels are also available in a SIPLUS version for extreme environmental conditions (e.g. use in corrosive atmosphere/with condensation).
Further information: www.siemens.com/siplus-extreme
SIMATIC OP 277 6" key device and TP 277 with 6" touch display
18
SIMATIC Panels – 270 series
© Siemens AG 2010
SIMATIC Multi Panels – 170/270/370 series
More than just operator control and monitoring
Thanks to the Windows CE operating system, the multifunctional platforms offer PC-like openness and flexibility
combined with rugged, compact, and cost-optimized hardware. Without hard disk and fan, the SIMATIC Multi Panels
can be used for visualization even where high vibrations
or dust-laden atmospheres restrict the use of a PC.
Highlights of the Multi Panels
Multi Panels1) are distinguished by their high performance,
openness and expandability, and permit integration of additional software applications based on standard Windows CE.
This means the Multi Panels can combine several automation
functions on a single platform. HTML documents for operating
or work instructions, for example, can be displayed with the
help of the Microsoft Internet Explorer (preinstalled). It can be
configured which Internet/intranet pages are accessible.
■
Rugged design with no rotating media
■
HTML documents can be accessed from HMI applications with Internet Explorer
■
High memory capacity with additional memory expansion possible by means of card slots, e.g. for archives or
recipes, backup/restore
■
Onboard MPI, PROFIBUS, PROFINET/Ethernet and USB
interfaces
■
Brilliant TFT display with 64 K colors
■
Modular expansion possible with options, e.g.
- SIMATIC WinAC MP software PLC
- OPC server for vendor-independent communication
- [email protected] for remote maintenance and service over
the Intranet/Internet
- [email protected] for getting started with client/server
functionality
- ProAgent for visualizing process diagnostics messages
- Audit for traceability and simple validation
Central data or project management
SIMATIC MP 277 10" key device and MP 277 with 10" touch display
Individual function expansions
• Additional functions can be configured with Visual Basic
scripts. Logic operations, loops, and decisions, for example,
can also be executed outside the controller. More complex
functional expansions for customer-specific requirements
can be implemented via ActiveX components.
• The WinAC MP option is a software PLC under Windows CE.
WinAC MP runs simultaneously with WinCC flexible. Thus
the Multi Panel becomes a cost-effective solution for visualization and control tasks. Ruggedness is ensured due to the
fan-free and diskless hardware of the Multi Panels. Process
data is backed up automatically in case of a power failure.
WinAC MP is available in versions optimized for the performance of the Multi Panels. They are configured and programmed with STEP 7. The I/O is connected to the controller over PROFIBUS DP. WinAC MP can be purchased
individually or even more cost-effectively together with a
Multi Panel.
Access to the office world is opened up by networking the
Multi Panels using PROFINET/Ethernet. Archives and recipes
can be stored and managed centrally on the higher-level computer, and data can be exchanged without problems. For print
functions, the Multi Panels can use printers integrated into the
network.
1)
Multi Panels are also available in a SIPLUS version for extreme
environmental conditions (e.g. use in corrosive atmosphere/with
condensation).
Further information: www.siemens.com/siplus-extreme
SIMATIC Multi Panels – 170/270/370 series
19
© Siemens AG 2010
SIMATIC Multi Panels – 170/270/370 series
SIMATIC MP 177 1)
SIMATIC MP 377 1)
The MP 177 is suitable as the entry-level Multi Panel. It is already equipped with the innovative Windows CE5.0 operating
system, and it corresponds largely to the MP 277 in functionality. The high-resolution TFT touch display represents 64 K
colors and has a diameter of 5.7". For applications that do not
require archives and scripts, the MP 177 offers a low-cost alternative to the MP 277.
The MP 377 Multi Panels fulfill the highest performance requirements for complex applications. They are equipped with
the innovative Windows CE 5.0 operating system. It was possible to achieve increased performance compared to the predecessor version MP 370. The retentive message buffer offers
benefits to both operators and service personnel. Since the
latest technologies are utilized for the interfaces (PROFINET, 2
x USB 2.0, MMC/SD card slot), a maximum degree of investment protection is ensured.
A PROFINET/Ethernet interface, a PROFIBUS DP/MPI interface
(RS484/422) and a USB interface are onboard.
MP 377 Multi Panels are available in the following variants:
As with the MP277, the retentive message buffer offers benefits to both operators and service personnel.
SIMATIC MP 277 1)
With the option of creating archives and integrating additional
functions via scripts, the MP 277 is suitable for more demanding tasks.
■
12" touch display
■
12" display and membrane keyboard
■
15" touch display
■
19" touch display
The high-resolution TFT displays display 64 K colors.
MP 277 Multi Panels are available in the following variants:
■
7.5" touch display
■
7.5" display and membrane keyboard
■
10.4" touch display
■
10.4" display and membrane keyboard
The high-resolution TFT displays display 64 K colors.
SIMATIC MP 377 with 12" display and membrane keyboard
The integrated Microsoft Media Player provides multimedia
functionality and permits the display of videos. In addition to an
expanded Internet Explorer, Word documents, Excel tables, and
PDF documents can be displayed in the Microsoft Viewers.
Accessories for SIMATIC Multi Panels
SIMATIC MP 277 with 10.4" display and membrane keyboard
1)
20
MP 177 are also available as a SIPLUS extreme version for extreme environmental conditions (e.g. for use in corrosive atmosphere/condensation).
Further information: www.siemens.com/siplus-extreme
SIMATIC Multi Panels – 170/270/370 series
A rugged USB hub with IP65 degree of protection with 4 interfaces that can be accessed at the front or rear is available for
the new Multi Panels. This hub permits the quick connection
of I/O devices such as USB flash drives and printers without
having to open the control cabinet door and possibly interrupting the plant operation.
© Siemens AG 2010
SIMATIC Thin Clients
Low-cost operator stations on site in distributed systems
Thin Clients are low-cost operator terminals that provide
panel functionality on site in large or extensive systems
and thus they contribute to an enhanced overview, operability, and productivity of the plant.
SIMATIC Thin Clients are low-cost operator stations that can
be used in large plants in addition to SIMATIC Panels or Panel
PCs. As remote operator terminals, they also allow for the use
of SCADA, office or IT functionalities directly on site at the machine in addition to HMI connection. Their installation cutout
and design are compatible with Multi Panels of the corresponding size. SIMATIC Thin Clients are always operated using
a touch screen or via an external keyboard or mouse connected to the USB interface.
SIMATIC Thin Clients always communicate with a host
(SIMATIC Panel, Panel PC or server) via [email protected] (screen
copy of panel on the client) or the Microsoft standard RDP (Remote Desktop Protocol), and therefore do not require installation, licenses or additional software on the unit itself. Larger
distances from the host can also be covered over Ethernet.
On-site host functionality
HMI applications such as WinCC or WinCC flexible as well as
Office applications such as MS Excel or SAP can be operated
direct at the SIMATIC Thin Client on the machine on site over
the RDP connection. Unlike with Microsoft CE Office Viewers,
the data can be written. RDP is a standard protocol that is supported by all Windows operating systems.
Integrated communication
SIMATIC Thin Clients can be integrated in PROFINET/Ethernet
networks. Alternatively, a point-to-point connection to the
host is possible using Ethernet cables. Distances of up to
100 m (even more with switches) can be bridged. This is considerably more than with conventional operator panels connected over USB-DVI.
Typical SIMATIC Thin Client application scenarios
■
WinCC, installed on server systems, can be displayed
and operated on Thin Clients by means of the Remote
Desktop Protocol (RDP). Thin Clients prove their worth
in this case as rugged and low-cost distributed operator stations. Thin Clients with complete IP65 protection
permit operator control and monitoring since they can
be flexibly mounted and set up as required outside of the
control cabinet even in harsh environments.
■
WinCC flexible, installed on SIMATIC Multi Panels or
SIMATIC PCs, can be displayed and operated on Thin
Clients by means of the option [email protected] In this
case as well, Thin Clients can be used as low-cost local
operator stations. This can be of interest if the same
process needs to be controlled from several locations
in the plant.
■
Access to HTML pages on the web is possible by means
of the integrated browser. Thin Clients prove their
worth in this case as additional web terminals for Intranet/Internet applications.
Easy commissioning
SIMATIC Thin Clients require only one IP address. Local software installation or configuring are not required. The display
and user interface are provided by the host. Therefore the client also does not have to implement backup, restore, or update actions. The total costs of ownership are correspondingly
low.
High degree of ruggedness
As a remote operator terminal without a hard disk and fan, the
device can be operated on machines with particularly high
mechanical ruggedness requirements (e.g. vibration resistance).
You will find information on an all-round IP65-protected version on page 23.
SIMATIC Thin Client
10"
15"
Display
TFT, 64 K colors
TFT, 64 K colors
Resolution
640x480 (VGA)
1024x768 (XGA)
Can be installed with
MP 277 (10"),
MP 370 (12")
MP 370 (15")
Interfaces
USB (on the rear), PROFINET/Ethernet,
24 V power supply
Terminal connection
[email protected], RDP (Microsoft)
Web connection
HTML, HTTP, JavaScript
Degree of protection
IP54, IP65 (optional) at the front
SIMATIC Thin Clients
21
© Siemens AG 2010
SIMATIC Panels with stainless steel front
To meet the highest demands for safety and hygiene
Panels with touch screens and stainless steel fronts are designed for operator control and monitoring of food processing machines in the food, beverages and tobacco industry. They are based on DIN EN 1672-2 "Food processing
machinery – Safety and hygiene requirements".
The highlights of panels with stainless steel front
The external dimensions and installation cutout are the same
as for standard products. The optimized frame is almost flush
with the control cabinet.
■
Resistant and rugged stainless steel fronts with polished surface for easy cleaning
■
Optimized rack design with slight projections to the
cabinet and for allowing liquids to run off
■
Minimized grooves and gaps as well as increased resistance to cleaning and disinfection agents
■
Non-migrating, food-standard sealing material (flat
seals to FDA 21 CFR 177.2006) and display splash protection to avoid contamination by foodstuffs
■
The device front is based on DIN EN 1672-2
■
Decorative foil, resistance against chemicals
tested according to DIN 42115, Part 2
■
IP66 degree of protection (IP66K in part)
■
ATEX approval
Special
properties of the
SIMATIC Panels with
stainless steel front
TP 177B color PN/DP INOX
MP 277 10" Touch INOX
MP 377 15" Touch INOX
Panel PC 677B INOX
Front
Stainless steel 1.4301, polyester foil/polished, grain size 240
Material/surface
EPDM
Seal
Optimized frame design, inclined surfaces
Special features
Ambient conditions
Degree of protection
Ambient temperature during
operation
Front: IP66K,
Front: IP66K,
Front: IP66K,
NEMA 4, 4 x and 12,
NEMA 4, 4 x and 12,
NEMA 4, 4 x and 12,
on the rear: IP20
on the rear: IP20
on the rear: IP20
Vertical mounting: 0 ... 50 °C; max. angle of inclination: +/- 35°: 0 ... 40 °C
Relative humidity
Max. 85 % (no condensation)
Transport/storage temperature
-20 °C ... +60 °C
Approvals
FM Class 1 Div 2, cULus, CE,
C-Tick, Ex-Zone 2/22
FM Class 1 Div 2, cULus,
CE, C-Tick, Ex-Zone 22
Front plate W x H (in mm)
212 x 156
Installation cutout W x H
(in mm)
Weight
Front: IP66K,
rear: IP20
+5 °C ... 50 °C in maximum
configuration
FM Class 1 Div 2, cULus,
CE, C-Tick, Ex-Zone 2/22
cULus, CE
335 x 263
400 x 310
483 x 310
198 x 142
310 x 248
368 x 290
450 x 296
Approx. 1.5 kg
Approx. 4.2 kg
Approx. 7 kg
Approx. 15 kg
Dimensions
Special features
22
SIMATIC Panels with stainless steel front
Clamping frame on the rear side
© Siemens AG 2010
Fully protected HMI devices
For flexible use on a supporting arm or stand
The new HMI devices with all-round protection supplement the portfolio of the tried and tested built-in units
with rugged operator panels in a slim and appealing design. The devices are designed for mounting on a stand or
supporting arm and feature all-round IP65 protection.
Highlights
■
Operator panels with all-round IP65 protection
for mounting on supporting arms or stands
■
Removable backplane hood for optimum service
friendliness.
■
Maximum compactness and low weight for easy
mounting
■
Easy adjustability to changing requirements thanks to
modular expansions
The series is technically based on available built-in devices:
• SIMATIC Flat Panel Monitor PRO 15" – the brilliant, rugged
industrial display at an attractive price; up to 30 m away
from the PC
• SIMATIC Thin Client PRO 15" – ideal as second operator station for cost-optimized automation concepts with Thin Client technology
• SIMATIC Multi Panel 377 PRO 15" – with maximum performance, optimized for the SIMATIC WinAC MP software PLC
and expandable by means of software options.
All devices feature a brilliant 15" touch display and can be flexibly mounted onto many different supporting arm and stand
systems. Thus they can be optimally used on machines without requiring a control cabinet. This permits ergonomic operation at different locations in plants or at production lines. The
devices are connected to supporting arm systems from different manufacturers by means of adapters, optionally on the
top or bottom of the device. Both options are provided as standard.
Due to their low weight, the HMI devices with all-round protection can be mounted easily and quickly. The backplane can
be removed easily – e.g. for subsequent installation of cables
or replacing memory cards – and thus ensures a high degree
of service friendliness even when the device is already mounted on the machine.
Modular expansions
The new, modular expansion units perfectly supplement the
completely protected HMI devices and ideally match the attractive design.
They can be attached optionally on the right, on the left, or
above or below the operator panels. The IP65 degree of protection is retained for the entire system even after installation.
The expansion units can be equipped individually with switches
or illuminated pushbuttons, and they thus open up operator
control options such as emergency off (also PROFIsafe) or
plant-specific, mechanical control elements.
Fully protected HMI devices
23
© Siemens AG 2010
Customer-specific solutions
The technical design of SIMATIC Panels is oriented toward
the requirements of all industries. Individual SIMATIC Panels meet specific requirements.
There are also SIMATIC Panels based on standard products
which are tailored to individual customer requirements. Panels can be adapted to the machine design as follows:
24
■
Customized design
■
Use of the company name instead of the Siemens logo
and modification of the type designation
■
Different housing color
■
Customer-specific hardware modifications such as the
design and dimensions of the front plate, selection of
the display, memory configuration, drives, options
■
Customer-specific Panel PC configuration as a rugged
embedded hardware and software system, without hard
disk and with tailor-made software
■
Customer-specific software suite with choice of Windows operating systems
■
Customer-specific applications for Windows CE-based
panels (Open Platform Program)
■
Device mounted in a stainless steel cabinet as a readyto-install and ready-to-connect terminal that is ergonomic, functional, and with high degree of protection
and tested heat dissipation (e.g. all-round IP66 degree
of protection)
■
Tested hygiene with LGA test mark 5664018.
Customer-specific solutions
HMI operator stations
Complete HMI operator stations can be used wherever HMI
devices cannot be installed in a control cabinet or directly at
the machine.
The HMI operator station concept is based on a modular design where HMI devices can be installed according to function
in selected housings.
■
HMI device encapsulation for all-round protection (IP65)
■
Can be mounted on a stand or supporting arm.
Can be rotated with the help of adjusting elements
■
Possible connection of external keyboard and mouse
■
Installation option for specific hardware components.
© Siemens AG 2010
Accessories for SIMATIC Operator Panels
Memory media
Converters/adapters
Converters and adapters
expand the physical possibilities for connecting
SIMATIC Operator Panels.
This makes it possible, for
example, to externally convert from RS422 to RS232.
Furthermore, this allows
SIMATIC S5 controllers and
non-Siemens controllers to
be connected. Using angled
adapters, the connector
Data such as the operating
system, projects, license
keys, etc. can be saved and
transferred via various
types of standard storage
media. The selection of
storage media for SIMATIC
HMI ranges from Compact
Flash cards and Multi Media
Cards to the SD card. Standard USB flash drives are
approved for all of the panels with Windows CE 5.0 or higher.
outlet can be rotated by 90°.
Industrial Hub 4
Protective covers, cover foils
With protective covers, installed SIMATIC Operator
Panels can be protected
against scratching and dirt
on the front side. The degree of protection of the
panel is retained or even
improved. In addition to
protective covers, protective membranes are also
available for the touch displays.
The active industrial USB
Hub 4 has 4 USB V1.1 ports.
These are arranged such
that up to four standard
USB flash drives, for example, can be securely attached. When installed, the
four ports can be accessed
simultaneously from the
front via an IP65 flap and
from the control cabinet at
the back. The USB Hub 4
can also be optionally mounted direct on a standard mounting
rail. All USB products approved for panels or PCs can be connected.
Connectors
For PROFIBUS and
PROFINET, there is a comprehensive selection of
connection plugs and plugin connectors with various
connection methods available. The bus connector is
available in several versions
for various cable outlets. Integrated terminating resistors can easily be connected from outside. 24 V DC
power supply connectors can also be ordered.
Service packs
Service packs for SIMATIC
Panels contain all of the removable parts for the respective panel, e.g. mounting clamp, mounting seal,
and connecting plug. The
contents vary depending
on the panel. You can easily
create your own labeling
strips using an inkjet or laser printer. A Word template is provided for this
purpose.
Accessories for SIMATIC Operator Panels
25
© Siemens AG 2010
SIMATIC Operator Panels at an introductory price
SIMATIC Panels starter packages
Easy entry at a minimum price: you save up to 40 % compared to purchasing the products individually.
Starter packages
Consisting of
Panel
Engineering
software
Cable
Other
Micro Panels
OP 73micro
Operator Panel OP 73micro 3", Key
WinCC flexible Micro
MPI (5 m)
–
TP 177micro
Touch Panel TP 177micro 6"
WinCC flexible Micro
MPI (5 m)
–
Wall bracket, DP Box or
PN Plus Box
Wall bracket,
PN Plus Box
1 x charging station,
1 x additional battery
3 x transponders,
1 x charging station,
1 x additional battery
Mobile Panels
177 (DP Plus/PN Plus)
277 (DP Plus/PN Plus)
277 IWLAN
277F IWLAN
Mobile Panel 177 DP or PN
6", Touch + Key
Mobile Panel 277 8", Touch + Key
WinCC flexible Compact
DP or PN (10 m)
WinCC flexible Standard
DP or PN (10 m)
Mobile Panel 277 IWLAN 8",
Touch + Key
Mobile Panel 277F IWLAN 8",
Touch + Key
WinCC flexible Standard
–
WinCC flexible Standard
–
Basic Panels
KTP400 Basic mono PN
KTP400 Basic mono PN
WinCC flexible Compact
PN (10 m)
–
KTP600 Basic mono PN
KTP600 Basic mono PN
WinCC flexible Compact
PN (10 m)
–
KTP600 Basic color DP
KTP600 Basic color DP
WinCC flexible Compact
MPI (5 m)
–
KTP600 Basic color PN
KTP600 Basic color PN
WinCC flexible Compact
PN (10 m)
–
KTP1000 Basic color DP
KTP1000 Basic color DP
WinCC flexible Compact
MPI (5 m)
–
KTP1000 Basic color PN
KTP1000 Basic color PN
WinCC flexible Compact
PN (10 m)
–
TP1500 Basic color PN
TP1500 Basic color PN
WinCC flexible Compact
PN (10 m)
–
MPI (5 m), PC/PPI
Multimaster
MPI (5 m), PC/PPI
Multimaster
MPI (5 m), RS 232 (5 m)
–
MPI (5 m), PC/PPI
Multimaster
MPI (5 m), PC/PPI
Multimaster
MPI (5 m)
–
MPI (5 m), PC/PPI
Multimaster
–
–
–
Panels
OP 73
OP 73 Operator Panel 3", Key
WinCC flexible Compact
OP 77A
OP 77A Operator Panel 4.5", Key
WinCC flexible Compact
OP 77B
OP 77B Operator Panel 4.5", Key
WinCC flexible Compact
TP 177A
TP 177A Touch Panel 6", Touch
WinCC flexible Compact
TP 177B 4"
TP 177B Touch Panel 4.3",
TFT widescreen color display
TP 177B PN/DP Touch Panel 6", Touch
WinCC flexible Compact
OP 177B
OP 177B PN/DP Operator Panel 6",
Touch + Key
WinCC flexible Compact
MP 277 8", Touch
MP 277 Multi Panel 8", Touch
WinCC flexible Standard
MP 277 10", Touch
MP 277 Multi Panel 10", Touch
WinCC flexible Standard
MP 377 12", Touch
Multi Panel 12", Touch
WinCC flexible Standard
MPI (5 m), PC/PPI
(RS 232)
MPI (5 m), PC/PPI
(RS 232)
MPI (5 m)
MP 377 15", Touch
Multi Panel 15", Touch
WinCC flexible Standard
MPI (5 m)
TP 177B 6"
WinCC flexible Compact
–
–
–
–
Multi Panels
–
–
The documentation is supplied on CD-ROM. For most of the devices, we offer a free one-year Software Update Service.
26
SIMATIC Operator Panels at an introductory price
© Siemens AG 2010
The new SIMATIC HMI promotion packages
SIMATIC TD 400C/SIMATIC S7-200 promotion package
SIMATIC MP 277/SIMATIC Thin Client promotion package
The TD 400C provides a backlit, 4-line LC display and 15 freely
assignable keys with tactile, acoustic or visual feedback. Additional user friendliness is made possible by the freely configurable interface of the device, which can be individually
adapted to the respective application.
Thanks to the Windows CE operating system, the Multi Panel
277 offers PC-like openness and flexibility combined with rugged, compact, and cost-optimized hardware.
The TD 400C is ideally adapted to the performance and applications of the S7-200, which means lower configuration overhead. It is connected to the S7-200 using a standard MPI cable
and configured with the SIMATIC STEP7 Micro/WIN software.
Components:
• TD 400C
• SIMATIC S7-200 CPU 224
• SIMATIC STEP7 Micro/
Win V4.0
• Simulator module
• Memory module
• PPI cable
• HMI Manual Collection
• TANOS Box
SIMATIC KTP600 Basic color DP/SIMATIC S7-200 promotion
package
The SIMATIC KTP600 Basic color DP has 6 keys with tactile
feedback and a 6" touch display for intuitive operation. Communication is implemented over PROFIBUS by default. The
new Basic Panel is configured with SIMATIC WinCC flexible.
The compact and powerful S7-200 micro PLC is the ideal controller for Basic Panels and is now available in a combined promotion package with the KTP600 Basic Panel.
Components:
• KTP600 Basic color DP
• SIMATIC S7-200 CPU 224
• SIMATIC WinCC flexible
2008 Compact
• SIMATIC STEP7 Micro/
WIN 4.0 software
• PPI cable
• PROFIBUS cable
• HMI Manual Collection
• TANOS Box
In large systems, where the same process must be controlled
at several locations, the SIMATIC Thin Client can be used as a
cost-effective, additional operator terminal.
In combination with the Multi Panel 277, all of the operating
screens that are configured with SIMATIC WinCC flexible are
not only displayed on the Multi Panel, but also via the WinCC
flexible option [email protected] Access on the Thin Client, where they
can also be operated.
This means that the operator has on-site access to panel functionality on the Thin Client at a favorable price, which contributes to an improved overview, operability and thus
productivity of the plant.
Components:
• SIMATIC Multi Panel 277
10" Touch
• SIMATIC Thin Client 10"
• SIMATIC WinCC flexible
Standard
• SIMATIC WinCC flexible
[email protected] Access license
• MPI cable
• PROFINET cables
• HMI Manual Collection
Take advantage of the new promotion packages to become familiar with the benefits of the perfect interplay of the selected
combinations of devices. The packages are only available for a
limited time. For further information, see:
www.siemens.com/simatic-hmi
SIMATIC Operator Panels at an introductory price
27
© Siemens AG 2010
Get more information
www.siemens.com/simatic-hmi
www.siemens.com/simatic-panels
SIPLUS extreme – hardening and finishing:
www.siemens.com/siplus-extreme
SIMATIC Guide manuals:
www.siemens.com/simatic-docu
You can order further documents on the topic SIMATIC at:
www.siemens.com/simatic/printmaterial
Service & Support Portal:
www.siemens.com/automation/support
SIMATIC contacts:
www.siemens.com/automation/partner
Information and ordering platform:
www.siemens.com/industrymall
Siemens AG
Industry Sector
Industrial Automation Systems
Postfach 48 48
90327 NÜRNBBERG
GERMANY
www.siemens.com/automation
Subject to change without prior notice
PDF (6ZB5370-0CJ02-0BB2)
3P.8101.30.08 / Dispo 26100
BR 0409 3.0 ROT 28+16 En
0410 5. PDF / 3P.8201.30.09
Printed in Germany
© Siemens AG 2009
Die Informationen in dieser Broschüre enthalten Beschreibungen
bzw. Leistungsmerkmale, welche im konkreten Anwendungsfall
nicht immer in der beschriebenen Form zutreffen bzw. welche
sich durch Weiterentwicklung der Produkte ändern können. Die
gewünschten Leistungsmerkmale sind nur dann verbindlich,
wenn sie bei Vertragsschluss ausdrücklich vereinbart werden.
Liefermöglichkeiten und technische Änderungen vorbehalten.
Alle Erzeugnisbezeichnungen können Marken oder Erzeugnisnamen der Siemens AG oder anderer, zuliefernder Unternehmen
sein, deren Benutzung durch Dritte für deren Zwecke die Rechte
der Inhaber verletzen kann.
SO_Poster_Panels_Titel_EN_1504201 1
15.04.2010 08:22:52
Answers for industry.
SIMATIC HMI
Technical specifications · April 2009
Operator panels to suit all demands
© Siemens AG 2010
SIMATIC Panels
Get more information
www.siemens.com/simatic-hmi
www.siemens.com/simatic-panels
SIPLUS extreme – hardening and finishing:
www.siemens.com/siplus
For further details, refer to the SIMATIC Manuals Guide:
www.siemens.com/simatic-docu
You can order further documents on the topic SIMATIC at:
www.siemens.com/simatic/printmaterial
In-depth technical documentation is available from our
Service&Support Portal:
www.siemens.com/automation/support
For a personal discussion, you can locate your nearest contact at:
www.siemens.com/automation/partner
You can place a direct order electronically over the Internet at the
Industry Mall:
www.siemens.de/industrymall
Siemens AG
Industry Sector
Postfach 48 48
90026 NÜRNBERG
GERMANY
www.siemens.com/automation
Subject to change without prior notice
PDF (6ZB5370-0CJ02-0BB2)
3P.8101.30.09 / Dispo 26100
BR 0509 3. ROT 16 En
0410 5. PDF / 3P.8201.30.09
Printed in Germany
© Siemens AG 2009
The information provided in this brochure contains descriptions or
characteristics of performance which in case of actual use do not
always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the
terms of contract. Availability and technical specifications are subject to change without notice.
All product designations may be trademarks or product names of
Siemens AG or supplier companies whose use by third parties for
their own purposes could violate the rights of
the owners.
SO_POSTER_Bediengeraete_EN_TD_oben_15042009.fm Seite 1 Donnerstag, 15. April 2010 8:07 08
Basic Panels
Panels
70 series
Low-cost operator control and monitoring of simple applications
Multi Panels
170 series
Low-cost operator control using rugged keys
270 series
The all-rounder with comprehensive basic functionality
The universal devices with high-contrast TFT displays
Technology
overview
KTP 400
Basic
mono PN
4“ Touch
+ Key
KTP 600
Basic
mono PN
6“ Touch
+ Key
KTP 600
Basic
color DP
6“ Touch
+ Key
KTP 600
Basic
color PN
6“ Touch
+ Key
KTP1000
Basic
color DP
10“ Touch
+ Key
KTP1000
Basic
color PN
10“ Touch
+ Key
TP1500
Basic
color PN
15“ Touch
170 series
270 series
370 series
Getting started
Convincing performance, openness and expandability
with the MP class
OP 73
OP 77A
OP 77B
TP 177A
TP 177B
TP 177B
OP 177B
TP 277
OP 277
MP 177
3"
Key
4,5"
Key
4,5"
Key
6"
Touch
4"
Touch
6"
Touch
6"
Touch + Key
6"
Touch
6"
Key
6"
Touch
Mobile Panels
Meeting the toughest demands on performance, openness, and expandability
MP 277
8"
Touch
10"
Touch
Maximum mobility for operator control and monitoring
MP 377
8"
Key
10"
Key
12"
Touch
12"
Key
15"
Touch
19"
Touch
177
277
277(F) IWLAN
277
6"
Touch + Key
8"
Touch + Key
8"
Touch + Key
10"
Touch
Display
STN liquid crys- STN liquid crys- TFT liquid crystal TFT liquid crystal TFT liquid crystal TFT liquid crystal TFT liquid crystal
tal display (LCD), tal display (LCD), display (LCD),
display (LCD),
display (LCD),
display (LCD),
display (LCD),
4 gray scales
4 gray scales
256 colors
256 colors
256 colors
256 colors
256 colors
STN liquid crystal display (LCD), monochrome
STN liquid crystal display (LCD), monochrome
STN liquid crystal display (LCD), monochrome
STN liquid crystal display (LCD),
4 blue levels
TFT wide-screen display (LCD), 256 colors
STN liquid crystal display (LCD), 4 blue levels or 256 colors
STN liquid crystal display (LCD), 4 blue levels or 256 colors
TFT liquid crystal display (LCD), 256 colors
TFT liquid crystal display (LCD), 256 colors
TFT liquid crystal display (LCD), 64K colors
TFT liquid crystal display (LCD), 64K colors
TFT liquid crystal display (LCD), 64K colors
TFT liquid crystal display (LCD), 64K colors
TFT liquid crystal display (LCD), 64K colors
TFT liquid crystal display (LCD), 64K colors
TFT liquid crystal display (LCD), 64K colors
TFT liquid crystal display (LCD), 64K colors
TFT liquid crystal display (LCD), 64K colors
STN liquid crystal
display (LCD),
256 colors
TFT liquid crystal
display (LCD),
64K colors
TFT liquid crystal
display (LCD),
64K colors
TFT liquid crystal
display (LCD),
64K colors
Size (in inches)
3.8
5.7
5.7
5.7
10.4
10.4
15.1
3
4.5
4.5
5.7
4.3
5.7
5.7
5.7
5.7
5.7
7.5
10.4
7.5
10.4
12.1
12.1
15
19
5.7
7.5
7.5
10.4
Resolution (W x H in pixels)
320 x 240
320 x 240
320 x 240
320 x 240
640 x 480
640 x 480
1024 x 768
160 x 48
160 x 64
160 x 64
320 x 240
480 x 272
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1280 x 1024
320 x 240
640 x 480
640 x 480
800 x 600
MTBF backgr. lighting (at 25°C in h)
30,000
50,000
50,000
50,000
50,000
50,000
50,000
100,000
100,000
100,000
50,000
30,000
50,000
50,000
50,000
50,000
50,000
50,000
50,000
50,000
50,000
50,000
50,000
50,000
50,000
50,000
50,000
50,000
50,000
Front dimensions (in mm)
140 x 116
214 x 158
214 x 158
214 x 158
335 x 275
335 x 275
400 x 310
154 x 84
150 x 186
150 x 186
212 x 156
140 x 116
212 x 156
243 x 212,5
212 x 156
308 x 204
212 x 156
240 x 180
325 x 263
352 x 221
483 x 310
335 x 275
483 x 310
400 x 310
483 x 400
Diameter 245
Diameter 290
Diameter 290
Diameter 350
Operator controls
Touch screen,
4 tactile keys
Touch screen,
6 tactile keys
Touch screen,
6 tactile keys
Touch screen,
6 tactile keys
Touch screen,
8 tactile keys
Touch screen,
8 tactile keys
Touch screen
Membrane keyboard
Membrane keyboard
Membrane keyboard
Touch screen
Membrane keyboard,
touch screen
Touch screen
Membrane keyboard,
touch screen
Touch screen
Membrane keyboard
Touchscreen
Touchscreen
Touchscreen
Membrane keyboard
Membrane keyboard
Touchscreen
Membrane keyboard
Touchscreen
Touchscreen
Membrane keyboard,
touch screen
Membrane keyboard,
touch screen
Membrane keyboard,
touch screen
Touch screen
Function keys (programmable)/
system keys
4/–
6/–
6/–
6/–
8/–
8/–
–/–
4/8
8 / 23
8 / 23
–/–
4/–
–/–
32 / –
–/–
24 / 36
–/–
–/–
–/–
26 / 38
36 / 38
–/–
36 / 38
–/–
–/–
14 / 14
18 / 18
18 / 18
–/–
External keyboard/mouse/printer
–/–/–
–/–/–
–/–/–
–/–/–
–/–/–
–/–/–
–/–/–
–/–/–
–/–/–
– / – / USB
–/–/–
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
USB / USB / USB
–/–/–
USB / USB / USB
USB / USB / USB
USB / USB / USB
512 Kbyte
512 Kbyte
512 Kbyte
512 Kbyte
1024 Kbyte
1024 Kbyte
1024 Kbyte
256 Kbyte
256 Kbyte
1024 Kbyte
512 Kbyte
2 Mbyte
2 Mbyte
2 Mbyte
4 Mbyte
4 Mbyte
2 Mbyte
6 Mbyte
6 Mbyte
6 Mbyte
6 Mbyte
12 Mbyte
12 Mbyte
12 Mbyte
12 Mbyte
2 Mbyte
6 Mbyte
6 Mbyte
6 Mbyte
– / 40 Kbyte
– / 40 Kbyte
– / 40 Kbyte
– / 40 Kbyte
– / 40 Kbyte
– / 40 Kbyte
– / 40 Kbyte
–/–
– / 32 Kbyte
– / 32 Kbyte
– / 32 Kbyte
– / 32 Kbyte
– / 32 Kbyte
– / 32 Kbyte
– / 64 Kbyte
– / 64 Kbyte
– / 32 Kbyte
1024 Kbyte / 64 Kbyte
1024 Kbyte / 64 Kbyte
1024 Kbyte / 64 Kbyte
1024 Kbyte / 64 Kbyte
12 Mbyte / 128 Kbyte
12 Mbyte / 128 Kbyte
12 Mbyte / 128 Kbyte
12 Mbyte / 12 Kbyte
– / 32 Kbyte
1024 Kbyte / 64 Kbyte
1024 Kbyte / 64 Kbyte
1024 Kbyte / 64 Kbyte
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–/–/–
–/•/•
–/•/•
•/•/•
–/•/•
•4) / • / •
•4) / • / •
•4) / • / •
•4) / • / •
•4) / • / •
•4) / • / •
•4) / • / •
•4) / • / •
•4) / • / •
•4) / • / •
•4) / • / •
•4) / • / •
•4) / • / •
•4) / • / •
• / •2) / •2)
•/•/•
–/–/–
•/•/•
•3)
•3)
•
•
•
•
•
•
•
•
•
•
•
•1)
•
(•) / (• via IWLAN)
•
Usable memory
Memory for options/recipes
6)
Alarm buffer
•
•
•
•
•
•
–/–/–
–/–/–
–/•/•
–/–/–
–/•/•
–/–/–
Interfaces
Serial / MPI / PROFIBUS DP
PROFINET (Ethernet)
•
•
–
•
–
•
•
–
–
–
–
•3)
USB
–
–
–
–
–
–
–
–
–
•
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
–
•
•
•
Slot for CF / Multi Media / SD Cards
–/–/–
–/–/–
–/–/–
–/–/–
–/–/–
–/–/–
–/–/–
–/–/–
–/–/–
–/• /–
–/–/–
–/•/•
–/ •/–
–/•/–
–/•/–
–/•/–
– /• / •
– /• / •
–/•/•
–/•/•
–/•/•
•/•/•
•/•/•
•/•/•
•/•/•
–/•/–
–/•/•
–/•/•
–/•/•
Functionality (when configuring with WinCC flexible)
Signaling system (number of messages/message classes)
200 / 32
200 / 32
200 / 32
200 / 32
200 / 32
200 / 32
200 / 32
500 / 32
1000 / 32
1000 / 32
1000 / 32
2000 / 32
2000 / 32
2000 / 32
4000 / 32
4000 / 32
2000 / 32
4000 / 32
4000 / 32
4000 / 32
4000 / 32
4000 / 32
4000 / 32
4000 / 32
4000 / 32
2000 / 32
4000 / 32
4000 / 32
4000 / 32
Process screens
50
50
50
50
50
50
50
500
500
500
250
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
Tags
250
500
500
500
500
500
500
1000
1000
1000
500
1000
1000
1000
2048
2048
1000
2048
2048
2048
2048
40967)
40967)
40967)
40967)
1000
2048
2048
2048
Vector graphics
•
•
•
•
•
•
•
–
–
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Bar graphs/curve charts
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/–
•/–
•/–
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
Faceplates
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
–
•
•
•
•
•
•
•
•
–
•
•
•
Recipes
5
5
5
5
5
5
5
–
5
100
5
100
100
100
300
300
100
300
300
300
300
500
500
500
500
100
300
300
300
Archiving
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
–
•
•
•
•
•
•
•
•
–
•
•
•
Visual Basic scripts
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
–
•
•
•
•
•
•
•
•
–
•
•
•
PG functions (STATUS/CONTROL)
–
–
–
–
–
–
–
–
–
–
–
with SIMATIC S5/S7
with SIMATIC S5/S7
with SIMATIC S5/S7
with SIMATIC S5/S7
with SIMATIC S5/S7
with SIMATIC S7
with SIMATIC S5/S7
with SIMATIC S5/S7
with SIMATIC S5/S7
with SIMATIC S5/S7
with SIMATIC S5/S7
with SIMATIC S5/S7
with SIMATIC S5/S7
with SIMATIC S5/S7
with SIMATIC S5/S7
with SIMATIC S5/S7
with SIMATIC S7
with SIMATIC S7
SIMATIC S7 / SIMATIC WinAC
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
SIMATIC S5 / SIMATIC 505
–/–
–/–
–/–
–/–
–/–
–/–
–/–
–/–
–/–
•/•
–/–
•5) / •
•5) / •
•5) / •
•5) / •
•5) / •
•5) / •
•5) / •
•5) / •
•5) / •
•5) / •
•5) / •
•5) / •
•5) / •
•5) / •
•2)5) / •2)
•5) / •
–/–
•5) / •
SINUMERIK / SIMOTION
–/–
–/–
–/–
–/–
–/–
–/–
–/–
–/–
–/–
–/–
–/–
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
–/–
•/•
2)
•/•
–/–
•/•
•/•/•/•
–/–/–/–
•/•/•/•
WinCC flexible Compact, WinCC flexible
Standard, Advanced
Standard / Advanced
WinCC flexible
Standard / Advanced
WinCC flexible
Standard
Connection to controller
Allen Bradley / Mitsubishi
–/–
Modicon/Omron/GE-Fanuc/LGGlofaGM • / – / – / –
–/–
•/•
–/–
•/•
–/–
–/–
–/–
•/–
•/•
•/–
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
• /•
•/–/–/–
•/•/–/–
•/–/–/–
•/•/–/–
•/–/–/–
•/–/–/–
–
–
•/•/•/•
–
•/•/•/•
•/•/•/•
•/•/•/•
•/•/•/•
•/•/•/•
•/•/•/•
•/•/•/•
•/•/•/•
•/•/•/•
•/•/•/•
•/•/•/•
•/•/•/•
•/•/•/•
•/•/•/•
•2) / •2) / •2) / •2)
Engineering software
WinCC flexible Compact or higher
STEP 7 Basic
2)
9)
STEP 7 Basic
WinCC flexible Compact, Standard, Advanced
9)
STEP 7 Basic
WinCC flexible Compact, Standard, Advanced
WinCC flexible Standard, Advanced
9)
WinCCflexible, Compact,
Standard, Advanced
WinCC flexible Standard, Advanced
Options, applications
[email protected] / [email protected] /
ProAgent / Audit / Logon
–/–/–/–/–
–/–/–/–/–
–/–/–/–/–
–/–/–/–/–
–/–/–/–/–
–/–/–/–/–
–/–/–/–/–
–/–/–/–/–
–/–/–/–/–
–/–/–/–/–
–/–/–/–/–
•3)/ •3) / – / – / •
•3)/ •3) / – / – / •
•3)/ •3)/ – / – / •
•/•/•/•/•
•/•/•/•/•
•/•/–/–/•
•/•/•/•/•
•/•/•/•/•
•/•/•/•/•
•/•/•/•/•
•/•/•/•/•
•/•/•/•/•
•/•/•/•/•
•/•/•/•/•
•1) / •1) / – / – / •
•/•/–/•/•
•/•/–/•/–
• / • / – / – / –8)
OPC server / Pocket Internet Explorer
–/–
–/–
–/–
–/–
–/–
–/–
–/–
–/–
–/–
–/–
–/–
–/–
–/–
–/–
–/–
–/–
–/–
•/•
•/•
•/•
•/•
•/•
•/•
•/•
•/•
–/–
•/•
•/•
•/•
WinAC MP
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
•
•
•
•
•
–
–
–
–
1)
Device version PN
2)
Device version DP
3)
PN/DP version
4)
RS232 with adapter
5)
Using PROFIBUS DP only
6)
Integrated flash, expandable using memory card
7)
Configuration with WinCC flexible 2008 or higher
8)
Only monitoring mode for Mobile Panel 277F IWLAN
9)
With integrated WinCC Basic for S7-1200
© Siemens AG 2010
User memory
SO_POSTER_Bediengeraete_EN_TD_unten_15042009.fm Seite 1 Donnerstag, 15. April 2010 8:30 08
Push Button Panels
Micro Panels
The innovative operator panels
Thin Clients
Simple and low-cost operator control with the SIMATIC S7-200
Operator panels for special requirements
Low-cost operator stations in distributed systems
Technology
Overview
PP7
PP17-I
PP17-II
Type of operation
Function keys (programmable)
8 with LEDs
16 with LEDs
16 with LEDs
Output type
TD 100C
TD 200/
TD200C
TD 400C
OP 73micro
TP 177micro
Thin Client
Thin Client
Key
Key
Key
3"
Key
6"
Touch
10“
Touch
15“
Touch
Display
FSTN display (reflecting – STN display (with backno backlighting))
lighting)
STN display (with backlighting)
STN liquid crystal display STN liquid crystal display
(LCD), monochrom
(LCD) 4 blue levels
TFT, 64K colors
TFT, 64K colors
Size (in inches)
4 lines
4 lines
3“
5.7“
10“
15“
Resolution (W x H in pixels)
Max. 16 characters/line
Max. 20 characters/line
Character height 3.34 mm Character height 5 mm
16 or
24 characters/line
160 x 48
320 x 240
325 x 263
400 x 310
2 lines
3
3
3
MTBF backgr. lighting (at 25°C in h)
–
50,000
50,000
100,000
50,000
50,000
50,000
Number of LEDs
8
16
32
Front dimensions (in mm)
90 x 76
148 x 76
174 x 102
154 x 84
212 x 156
–
–
Operator controls
Membrane keyboard
Membrane keyboard
Membrane keyboard
Membrane keyboard
Touch screen
Touchscreen
Touchscreen
Function keys (programmable)/
system keys
14 (freely configurable)
TD 200: 8 / 5; TD 200C:
20 (freely configurable)
15 (freely configurable)
4/8
–/–
–/–
–/–
External keyboard/mouse/printer
–/–/–
–/–/–
–/–/–
–/–/–
–/–/–
– /via USB/ –
– /via USB/ –
User data on CPU
User data on CPU
User data on CPU
128 Kbyte
256 Kbyte
–
–
–/–
–/–
–/–
–/–
–/–
–
–
–
–
–
•
•
–
–
Serial / MPI / PROFIBUS DP
PPI
PPI
PPI
PPI
PPI
–
–
PROFINET (Ethernet)
–
–
–
–
–
1 x Ethernet (RJ45)
1 x Ethernet (RJ45)
USB
–
–
–
–
–
1 x USB
1 x USB
Slot for CF / Multi Media / SD Cards
–/–/–
–/–/–
–/–/–
–/–/–
–/–/–
–/–/–
–/–/–
[email protected] Access
[email protected] Access
Typical service life
Short-stroke keys (switching cycles)
1,500,000
1,500,000
LEDs (ON period in %)
1,500,000
100
Digital inputs
Number of digital inputs
Memory
4
16
16
Digital outputs
Number of digital outputs
Memory for options/recipes
–
16
16
Functionality
Key and lamp test
6)
Alarm buffer
Interfaces
yes
yes
yes
Degree of protection
Front / rear
User memory
IP65/IP20
IP65/IP20
IP65/IP20
Connection to controller
SIMATIC S7, WinAC
MPI, PROFIBUS DP
MPI, PROFIBUS DP
MPI, PROFIBUS DP
Functionality (when configuring
with WinCC flexible)
Configuration by means
of Micro/WIN
Configuration by means
of Micro/WIN
Configuration by means
of Micro/WIN
SIMATIC S5
PROFIBUS DP
PROFIBUS DP
PROFIBUS DP
Signaling system (number of messages/message classes)
40
80
80
250 / 32
500 / 32
Masters of any vendor
PROFIBUS DP
PROFIBUS DP
PROFIBUS DP
Process screens
32
64
64
250
250
Tags
288
864
864
500
250
Ambient conditions
Mounting position
Vertical
Vertical
Vector graphics
–
–
–
–
•
+/- 35
Max. permissible angle of inclination
without forced ventilation (in degrees)
+/- 35
+/- 35
Bar graphs/curve charts
–/–
–/–
–/–
•/–
•/•
Max. relative humidity (in %)
95
95
Faceplates
–
–
–
–
–
Recipes
–
–
–
–
–
Vertical
95
Temperature
SIMATIC Thin Clients – Low-cost on-site operator stations
•
WinCC, installed on server systems, can be displayed and operated by
means of the Remote Desktop Protocol (RDP). Thin Clients with complete
IP65 protection permit operator control and monitoring outside of the
control cabinet
•
WinCC flexible, installed on SIMATIC Multi Panels or SIMATIC PCs, can be
displayed and operated on site on Thin Clients by means of the
[email protected] option.
•
Access to HTML pages on web sites is possible by means of the integrated browser. Thin Clients can thus be used as additional web terminals for Intranet/Internet applications.
Operation (vertical installation in °C)
0 … + 55
0 … + 55
0 … + 55
Archiving
–
–
–
–
–
Operation
(max. angle of inclination in °C)
0 … + 55
0 … + 55
0 … + 55
Visual Basic scripts
–
–
–
–
–
PG functions (STATUS/CONTROL)
–
–
–
–
–
Enclosure front (W x H in mm)
114 x 204
114 x 204
114 x 204
Connection to controller
Installation cutout/device depth
(W x H / D in mm)
130 x 190 / 53
130 x 190 / 53
130 x 190 / 53
SIMATIC S7 / SIMATIC WinAC
S7-200
S7-200
S7-200
S7-200
S7-200
S7 modular embedded controller
S7 modular embedded controller
SIMATIC S5 / SIMATIC 505
–
–
–
–
–
–
–
SINUMERIK / SIMOTION
–
–
–
–
–
Available soon
Available soon
Allen Bradley / Mitsubishi
–
–
–
–
–
–
–
Modicon / Omron / GE-Fanuc /
LG Glofa GM
–
–
–
–
–
–
–
Engineering software
Micro/WIN V4.0 SP2
Micro/WIN V4.0
Micro/WIN V4.0 SP 6
WinCC flexible Micro, Compact, Standard, Advanced
–
–
[email protected] / [email protected] /
ProAgent / Audit / Logon
–
–
–
–
–
–
–
OPC server / Pocket Internet Explorer
–
–
–
–/–
–/–
–
–
WinAC MP
–
–
–
–
–
–
–
Dimensions
Options, application
Fully protected HMI devices
Memory media
The new HMI devices with all-round protection supplement the portfolio of tried and tested built-in units with rugged operator
panels in a slim and captivating design. The devices are designed for mounting on a support bracket or stand and feature allround IP65 protection.
Data such as the operating system, projects, license keys, etc. can be saved and transferred using various types of standard storage media. The selection of storage media for SIMATIC HMI ranges from
CompactFlash Cards and Multi Media Cards to SD Cards. Standard USB flash drives are approved for all
panels with Windows CE 5.0 or higher.
The series is technically based on available built-in devices:
• SIMATIC Thin Client PRO 15"
– ideal as second operator station for cost-optimized automation concepts with thin client technology
• SIMATIC Multi Panel 377 PRO 15"
– with maximum performance, optimized for the SIMATIC WinAC MP software PLC and expandable by means of
software options.
SIMATIC Panels with stainless steel front
Panels with touch screens and stainless steel fronts are designed for operator control and monitoring of food processing
machines in the food, beverage and tobacco industry. They are based on DIN EN 1672-2 "Food processing machinery – Safety
and hygiene requirements".
Available with stainless steel front:
• TP 177B color PN/DP INOX
• MP 277 10" Touch INOX
• MP 377 15" Touch INOX
• Panel PC 677B INOX
SIMATIC Multi Panel 377 15" Touch Daylight Readable
The SIMATIC Multi Panel 377 15" Touch Daylight Readable features a special display and touch technology. Thanks to
increased display brightness, operator control and monitoring is possible even in very bright environments. Good readability is ensured even in direct sunlight due to the transflective properties of the display. You can dim the backlighting
of the display on the display itself as well as externally and centrally via process values, e.g. by means of an potentiometer via the controller.
This means you can use the panel in control cabins for rigs and in control stations onboard ships. If installed in a suitable
control cabinet, the operator panel can even be used outdoors. The required extended ambient temperature range during operation can be achieved with the help of active heating and cooling in the control cabinet. Intelligent control of
heating and cooling can be implemented with the retrofit option "TEK – Temperature Extension Kit".
Industrial Hub 4
The active industrial USB Hub 4 has four USB V1.1 ports. These are arranged such that up to four standard USB flash drives can be locked in securely. When installed, the four ports can be accessed from
the control cabinet via an IP65 flap on the front and back. The USB Hub 4 can also be optionally
mounted directly on a standard mounting rail. All USB products approved for panels or PCs can be connected.
Connectors
For PROFIBUS and PROFINET, there is a comprehensive range of connection plugs and plug-in connectors with various connection methods available. The bus connector is available in several versions for
various cable outlets. Integrated terminating resistors can easily be connected from the outside. 24 V
DC power supply connectors can also be ordered.
Converters/adapters
Converters and adapters expand the physical possibilities for connecting SIMATIC Operator Panels. This
makes it possible, for example, to externally convert from RS422 to RS232. Furthermore, this allows
SIMATIC S5 controllers and third-party controllers to be connected. Using angled adapters, the connector outlet can be rotated by 90°.
Protective covers, cover foils
With protective covers, installed SIMATIC Operator Panels can be protected against scratching and dirt
on the front side. The degree of protection of the panel is retained or even improved. In addition to
protective covers, there are also cover foils for touch displays available.
Service packs
Service packs for SIMATIC Operator Panels contain all of the loose parts for the respective panel, e.g.
mounting wrench, mounting seal, and connection plug. The contents vary depending on the panel.
You can easily create your own labeling strips using an inkjet or laser printer. A Word template is provided for this purpose.
© Siemens AG 2010
LED color modes
Accessories
SO_Poster_Panels_Titel_EN_1504201 1
15.04.2010 08:22:52
Answers for industry.
SIMATIC HMI
Technical specifications · April 2009
Operator panels to suit all demands
© Siemens AG 2010
SIMATIC Panels
Get more information
www.siemens.com/simatic-hmi
www.siemens.com/simatic-panels
SIPLUS extreme – hardening and finishing:
www.siemens.com/siplus
For further details, refer to the SIMATIC Manuals Guide:
www.siemens.com/simatic-docu
You can order further documents on the topic SIMATIC at:
www.siemens.com/simatic/printmaterial
In-depth technical documentation is available from our
Service&Support Portal:
www.siemens.com/automation/support
For a personal discussion, you can locate your nearest contact at:
www.siemens.com/automation/partner
You can place a direct order electronically over the Internet at the
Industry Mall:
www.siemens.de/industrymall
Siemens AG
Industry Sector
Postfach 48 48
90026 NÜRNBERG
GERMANY
www.siemens.com/automation
Subject to change without prior notice
PDF (6ZB5370-0CJ02-0BB2)
3P.8101.30.09 / Dispo 26100
BR 0509 3. ROT 16 En
0410 5. PDF / 3P.8201.30.09
Printed in Germany
© Siemens AG 2009
The information provided in this brochure contains descriptions or
characteristics of performance which in case of actual use do not
always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the
terms of contract. Availability and technical specifications are subject to change without notice.
All product designations may be trademarks or product names of
Siemens AG or supplier companies whose use by third parties for
their own purposes could violate the rights of
the owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement