ViewSonic | N3752w-1M | User guide | ViewSonic N3752w-1M User guide

- User Guide
- Guide de l’utilisateur
- Guía del usuario
Model No. : VS11771-1M
Compliance Information .................................................................................. 1
Declaration of RoHS Compliance ................................................................... 2
Important Safety Instructions .......................................................................... 3
Copyright Information ...................................................................................... 4
Product Registration ........................................................................................ 4
Antenna Installation Instructions ..................................................................... 5
Cleaning the LCD TV ...................................................................................... 5
Getting Started
Package Contents ........................................................................................... 6
Mounting ViewSonic LCD TV to the wall ......................................................... 6
Front View of the Product ................................................................................ 7
Rear View of the Product ................................................................................ 8
Remote Control ............................................................................................... 9
Installation ....................................................................................................... 11
Basic Operation ............................................................................................... 17
OSD Functions
Video Menu ..................................................................................................... 20
Audio Menu ..................................................................................................... 21
TV Menu .......................................................................................................... 22
Setup Menu ..................................................................................................... 23
Parental Menu ................................................................................................. 26
Other Information
Specifications .................................................................................................. 30
Troubleshooting .............................................................................................. 31
Customer Support ........................................................................................... 32
Limited Warranty ............................................................................................. 33
Compliance Information
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void your authority to operate the equipment.
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and Electronic
Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment as unsorted
municipal waste, but use the return and collection systems according to local law.
This product has been designed and manufactured in compliance with Directive 2002/95/EC
of the European Parliament and the Council on restriction of the use of certain hazardous
substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply
with the maximum concentration values issued by the European Technical Adaptation
Committee (TAC) as shown below:
Proposed Maximum
Actual Concentration
Lead (Pb)
< 0.1%
Mercury (Hg)
< 0.1%
< 0.01%
< 0.1%
Polybrominated biphenyls (PBB)
< 0.1%
Polybrominated diphenyl ethers (PBDE)
< 0.1%
Cadmium (Cd)
Hexavalent Chromium
Certain components of products as stated above are exempted under the Annex of the RoHS
Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not
specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic
ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium
containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by
Declaration of RoHS Compliance
Important Safety Instructions
Read these instructions completely before using the equipment.
Keep these instructions in a safe place.
Heed all warnings.
Follow all instructions.
Do not use this equipment near water. Warning: To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or moisture.
Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV”
in this guide for further instructions.
Do not block any ventilation openings. Install the equipment in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce heat.
Do not attempt to circumvent the safety provisions of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade and the third prong are
provided for your safety. If the plug does not fit into your outlet, consult an electrician for
replacement of the outlet.
10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the
point where if emerges from the equipment. Be sure that the power outlet is located near
the equipment so that it is easily accessible.
11. Only use attachments/accessories specified by the manufacturer.
Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this equipment when it will be unused for long periods of time.
14. Refer all servicing to qualified service personnel. Service is required when the unit has
been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid
is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if
the unit does not operate normally or has been dropped.
15. This product is only to perform the useful function of entertainment and visual display
tasks are excluded.
Copyright Information
Copyright © ViewSonic Corporation, 2007. All rights reserved.
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right
to change product specifications without notice. Information in this document may change
without notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
Product Registration
To meet your future needs, and to receive any additional product information as it becomes
available, please register your product on the Internet at:
Product Name:
For Your Records
Model Number:
Document Number:
Serial Number:
Purchase Date:
ViewSonic LCD TV
N3735w-M_UG_ENG Rev. 1B 06-28-07
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of this
product properly at the end of its useful life. Your local waste disposal company may provide
information about proper disposal.
The lamp in this product contains mercury. Please dispose of properly in accordance with
environmental laws of your location.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered
trademarks of ViewSonic Corporation.
Antenna Installation Instructions
1. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges and built-up static charges, Article 810
of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
2. Lightning
For added protection for this product during a lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will
prevent damage to the product due to lightning and power-line surges. Do not disconnect the antenna or the
power cord during a heavy storm lighting may strike while you are holding the cable cord, causing serious
injury; turn off your LCD TV and wait for the weather to improve.
3. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light
or power circuits, or where it can fall into such power lines or circuits, When installing an outside antenna
system, extreme care should be taken to keep from touching such power lines or circuits as contact with them
might be fatal.
Ground clamp
Antenna discharge unit
Electric service equipment
Ground clamps
Grounding conductors
Power service grounding electrode system
Cleaning the LCD TV
• Make sure the LCD TV is turned off.
• Never spray or pour any liquid directly onto the screen or case.
To clean the screen:
1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft,
lint-free cloth, and wipe the screen.
To clean the case:
1. Use a soft, dry cloth.
2. If still not clean, apply a small amount of a non-ammonia, non-alcohol based, mild non-abrasive detergent
onto a clean, soft, lint-free cloth, then wipe the surface.
ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the LCD TV screen or
case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD TV. ViewSonic
will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
Getting Started
Congratulations on your purchase of a ViewSonic® LCD TV.
Important! Save the original box and all packing material for future shipping needs.
Your LCD TV package includes:
• Power Cord
Package Contents
• Remote Control with batteries
• ViewSonic User Guide & Quick Start Guide
Mounting ViewSonic LCD TV to the wall
The LCD TV can be used in a free standing position or wall-mounted. Before installing the
product to the wall, please consider the following guidelines:
• Read the Important Safety Instructions, at the start of this manual.
• Do not install in a moist or wet environment. This equipment is intended for indoor use.
• Do not install near heat source, or strong magnetic fields.
• Use only ViewSonic approved wall-mounting brackets to support the LCD TV weight.
• Before attaching the wall mount plate to the back cover, ensure the product is working.
• If your LCD TV is already set up for free-standing operation, you need to first remove the
stand before mounting the device to the wall.
To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:
• Disconnect the power and any other cables that might hinder moving the LCD TV.
• Set the LCD TV on a table or work surface, placing the screen face down on a towel or
woolen blanket to protect the screen surface from damage while installing plate.
• Through the matching screw holes in the bracket, there are 6 screws mounted on the
backside of the LCD TV. Loosen all 6 screws, and keep for future use.
• Install the wall mount plate to the LCD TV using screws NO LONGER than 10mm, as
longer screws found in universal (non-ViewSonic) wall mount kits may damage the
power supply causing the unit to fail. The wall-mount screw type is M6 x L10.
• Mount the wall mount bracket to the wall ensuring use of proper screws to support the
installation. Ensure there is at least 3cm of space surrounding any air-vents of your
LCD TV to allow adequate cooling during operation.
• Hang the LCD TV wall mount plate to the wall mount bracket, completing installation.
Enjoy your ViewSonic LCD TV!
Front View of the Product
1 Volume Down
Decrease sound volume or adjust a highlighted control while in OSD menu.
2 Volume Up
Increase sound volume or adjust a highlighted control while in OSD menu.
3 Menu
Turn OSD menu ON/OFF.
4 CH Down
Channel down when source is TV, or select a control while in OSD menu.
5 CH Up
Channel up when source is TV, or select a control while in OSD menu.
To highlight a control in OSD menu.
7 Power ON/OFF button
8 Remote Control Receiver
9 Power LED Indicator
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
(Only for DTV source in this model.)
1. Press VOL+ and MENU buttons at the same time to lock power button, and press
VOL+ and MENU buttons again to unlock it.
2. Press VOL- and VOL+ buttons at the same time to lock OSD menu, and press
VOL- and VOL+ buttons again to unlock it.
Rear View of the Product
A Power (AC input)
Using power cord provided, connect to a power source.
B Composite Video input
Connect this port to the composite video output of A/V device.
C Headphone Jack
Connect this port to your headphone.
D HDMI 2 / DVI 2 Input Terminal
Connect this port to the HDMI output of A/V device.
E HDMI 1 / DVI 1 Input Terminal
Connect this port to the HDMI output of A/V device.
F VGA signal input
Connect this port to the VGA output of your PC.
G VGA/ DVI 1 Audio input
Connect this port to PC line out jack.
H DVI 2 signal Audio input (left/right)
Connect this port to the RCA audio output connectors of your A/V device.
I YPbPr 2 signal input
Connect this port to the YPbPr output of A/V device.
YPbPr 1 signal input
Connect this port to the YPbPr output of A/V device.
S-Video input
Connect this port to the S-Video output of A/V device.
YPbPr 2 signal Audio input (left/right)
Connect this port to the RCA audio output connectors of your A/V device.
YPbPr 1 signal Audio input (left/right)
Connect this port to the RCA audio output connectors of your A/V device.
AV/ S-Video signal Audio input (left/right)
Connect this port to the RCA audio output connectors of your A/V device.
Audio output
Connect this port to your A/V device with audio in (RCA) connectors or to audio amplifier.
Air/Cable input jack
Connect the coaxial (RF) connector from Antenna/ Cable/ Digital cable.
SPDIF Optical output
Connect this port to the SPDIF input of A/V device.
Remote Control
Remote control button function as follow
Power ON/OFF
Select Mono, Stereo or SAP sound
Display current information
Select sound modes
Set timer to turn off TV
“Freeze-Frame” the current screen
Adjust window size
0~9, - number button
Directly channel select
VOL+ and VOL-
Adjust volume UP/DOWN
Show electronic program guide (EPG)
To skip or restore Favorite Channels
ENTER button
UP/ DOWN for OSD function select and LEFT/ RIGHT
for function adjust
ENTER: Enter the function setting
Input source select
Volume mute ON/OFF
Swap between TV/CATV
Select picture modes
Change the image size
Return to previous channel
CH▲ and CH▼
Adjust Channel UP/DOWN
Select from preset Favorite Channels
On Screen Display (OSD) menu ON/OFF
1. Insert Remote Control Batteries
1 Remove the battery cover by pulling then lifting the knob on the cover.
2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3 Reattach the battery cover.
• Only use the specified AAA batteries.
• Do not mix new and old batteries. This may result in cracking or leakage,
which may pose a risk of fire or lead to personal injury.
• Insert batteries according to (+) and (-) markings. Inserting the batteries
incorrectly may result in cracking or leakage, which may pose a risk of fire or
lead to personal injury.
• Dispose of the battery in accordance with local laws and regulations.
• Keep the battery away from children and pets.
• When the remote control will not to be used for an extended period, remove
the batteries.
2. Connecting RF antenna and Cable TV
Make sure the power is OFF before installing your LCD TV.
1) AIR TV: Connect the LCD TV to TV antenna with 75-ohm coaxial cable. Preset
the air TV channels into memory with Auto Scan function when using an antenna
TV system. This air input jack both support TV and DTV systems. Besides, the TV
system (NTSC) and DTV system (ATSC) can be found by the scanning of “AIR”
in the Auto Scan function. See page 23.
2) Cable TV: Connect the LCD TV to the cable with CATV and Digital cable. Preset
the cable TV channels into memory with Auto Scan function when using a cable
TV system. The cable input jack both support CATV and Digital cable systems.
Besides, the CATV system (cable TV) and Digital cable system (clear QAM) can
be found by the scanning of “Cable” in the Auto Scan function. See page 23.
Note: Users can select either Air or Cable TV cable to be connected to the TV/DTV
IN jack. To watch both of them, use an adapter to connect both Air and Cable
cables to the jack.
RF Cable, CATV/ Digital cable
or Adapter (not supplied)
3. Connecting to DVD / Set Top Box
Connect Video/ Audio cables from compatible devices into the back panel of LCD TV.
1) With AV cable:
RCA A/V Cable (not supplied)
VCR or DVD Player
2) With S-Video cable:
S-Video Cable (not supplied)
Audio Cable
(not supplied)
VCR or DVD Player
3) With YPbPr cable:
YPbPr Cable (not supplied)
Audio Cable
(not supplied)
VCR or DVD Player
4) With HDMI 1 or HDMI 2 cable:
(DVD Player should have
the HDMI output terminal)
VCR or DVD Player
HDMI Cable (not supplied)
5) With DVI 1 (HDMI 1) cable [for AV device]:
Audio Cable (not supplied)
(DVD Player should have the
HDMI-DVI output terminal)
VCR or DVD Player
HDMI-DVI Cable (not supplied)
6) With DVI 2 (HDMI 2) cable [for AV device]:
(DVD Player should have the
HDMI-DVI output terminal)
VCR or DVD Player
HDMI-DVI Cable (not supplied)
4. Connecting to External Stereo System to Listen to LCD TV Sound
Connect the audio output terminal of the LCD TV to audio in terminal of the stereo
system (stereo system sold separately).
Audio Cable
(not supplied)
Stereo system
5. Connecting to the Headphone
Connect the headphone to the headphone output terminal of the LCD TV.
(Headphone sold separately).
(not supplied)
Audio Cable (not supplied)
6. Connecting to a Computer
1) With VGA cable:
Connect the VGA cable from VGA output of computer to the VGA terminal input of
your LCD TV. Also, Connect the Audio cable (green) from audio output of your
Computer to the audio input terminal (green) of your LCD TV.
PC Audio Connection
(not supplied)
VGA 15 Pin Cable (not supplied)
2) With HDMI 1 to DVI cable:
Connect the HDMI-DVI cable from the DVI output of the computer to the HDMI
terminal input of the LCD TV. Also, Connect the Audio cable (green) from audio
output of your Computer to the audio input terminal (green) of your LCD TV.
PC Audio Connection
(not supplied)
HDMI-DVI Cable (not supplied)
7. Connecting to A/V Device with SPDIF input
Connect SPDIF optical cable from A/V device into the SPDIF output connector of
Audio Cable
(not supplied)
A/V Device
SPDIF Optical Cable
(not supplied)
Stereo System
8. Connecting with the power cord
Connect the power cord to the AC inlet on the back of your LCD TV, after all
connections have been completed, and plug the other end of the power cord into
a correctly grounded electrical outlet.
AC wall socket
Basic Operation
To operate your LCD TV, you may use the TV remote control or top panel buttons to
select input source, change channels, or adjust volume.
Turning on the LCD TV
Before using the LCD TV:
1. Connect external equipment properly.
2. Insert the power plug, and the power LED indicator will light amber.
Power On/Off
To turn the LCD TV on/off:
Press the POWER button under the LCD TV, or press the POWER button on your
remote control to turn on/off the TV. The power LED indicator lights blue when the
LCD TV is on.
Selecting input source
To select the required input source:
Press the INPUT button on the remote control. Use ▲▼ to select the required input
source between TV, AV, S-Video, YPbPr 1, YPbPr 2, VGA, HDMI 1, and HDMI 2.
To confirm the selection, press ENTER.
Volume adjusting
Press VOL+/- to adjust the volume.
To turn off the volume, press MUTE.
If you want to restore volume, press MUTE again, or press VOL+/- directly.
To display the current information of the LCD TV:
Press INFO, and the current state will be displayed on the screen. (It shows all or
some of the information about Input, Channel, Resolution, Audio Type, etc., depending
on what input source it is in.)
Channel Select
Press number key or CH▲/▼ button to select your desired channel.
1. ATV
The “-” button has no function in ATV mode. Directly press the number buttons to
select channels.
2. DTV
Use “-” button to select the sub channel in DTV.
Ex: Your desired number is 80-3.
Press 8 → press 0 → press “-” → press 3.
*Whether in ATV or DTV, after you input the channel numbers, press ENTER button
to direct to the channel immediately, or wait for 3 seconds to change automatically.
*Return to the previous channel, press RETURN button.
※How to switch between Air TV and Cable TV?
When in TV mode, press TV/CATV button to switch, or go to the Tuner Mode in the
TV menu to select.
Sleep Time Setting
Repeatedly press SLEEP button to set the off timer. The function is used to automatically
shut off the LCD TV after a preset period of time passed. There are several times for
choice – Off, 10min, 20min, 30min, 40min, 50min, 60min, 90min, or 120min.
Press ZOOM button repeatedly to select the screen size. You can select from Zoom x 1,
Zoom x 2, Zoom x 4, Zoom x 1/4, and Zoom x 1/2 sizes.
Repeatedly press WIDE button to select the aspect ratio of screen. You can select
between No scale, Normal, Full, Letterbox, Zoom, and Panorama.
Electronic Program Guide (EPG)
Press the GUIDE button on the remote control and the program information for the
channel you are watching will be displayed on the screen with the live program content
in a small window in the lower left corner of the panel.
Press the ◄ or ► button to scroll up or down the channels. Each time you pause at
a channel, the program list will update with the program schedule for that channel
and the window will show the live program for that channel. Press the GUIDE button
to exit this feature.
Freeze Picture
Press FREEZE button to freeze picture. However, the sound still continues. Press
FREEZE button again to restore.
Using the OSD function
You can use the OSD menus and options to adjust various settings by using the remote
The basic operation is as following:
• Press MENU to display OSD Menu.
• Press ▲▼ to select your desired top Menu, and press ENTER or ◄► to enter the
next level menu.
• Use ▲▼ to select the control you want to adjust.
• When selecting the control with II►, press ENTER to enable the function.
• Press ◄► to adjust or select the settings.
• Press MENU to exit from the OSD menu.
OSD Functions
Video Menu — To adjust the picture quality
In TV, AV, S-Video, YPbPr 1, YPbPr 2, HDMI 1, HDMI 2 source:
Note: When in AV, S-Video, YPbPr 1, YPbPr 2, HDMI 1 or HDMI 2 source,the TV option on
the left does not appear.
In VGA source:
• Picture Mode: To select picture mode between User, Cinema, Sport, Vivid, and Hi-Bright.
• Brightness: To adjust luminance of video. (right: Max, left: Min.)
• Contrast: To adjust contrast of video. (right: Max, left: Min.)
• Color: To adjust color. (right: brilliant color, left: pale color.)
• Tint: To adjust tint level. (right: greenish tone, left: reddish tone.)
• Sharpness: To adjust picture sharpness. (right: sharper, left: softer.)
• Color Temperature: Press ENTER to select color temperature from User, Cool, Normal,
and Warm.
When Color Temperature is selected to User, the R, G, B Gain level can be adjusted
• Auto Adjust: Press ENTER to auto adjust picture’s horizontal position, vertical position,
fine tune and H-Size.
• VGA: Press ENTER to adjust VGA setting.
*H. Position: To adjust the horizontal position of the picture.
*V. Position: To adjust the vertical position of the picture.
*Phase: To adjust delay time of phase in order to reduce the noise of picture.
*Clock: To adjust delay time of clock in order to reduce the noise of picture.
Audio Menu — To set the audio quality and status
In TV source:
In AV, S-Video, YPbPr 1, YPbPr 2, HDMI 1, HDMI 2, VGA source:
• Balance: To adjust left and right audio balance.
• Bass: To adjust bass.
• Treble: To adjust the treble.
• Surround: To enjoy a concert hall effect, select “On” when stereo is playing.
• Reverb: To enjoy the reverb sound effect of Concert, Living Room, Hall, Bathroom, Cave,
Arena, or Church.
• Equalizer: To select equalizer modes from Rock, POP, Live, Dance, Techno, Classic, Soft.
• SPDIF Type: To select SPDIF Type from Dolby Digital, PCM, or Off.
• Auto Volume control: To turn On or Off Auto Volume control. (This function is only effective
in TV source.)
TV Menu — To set up for TV
It is only active in TV source.
• Tuner Mode: To select Cable or Air as the TV source. Select “Cable” if you want to watch
Cable TV channels, and select Air to watch Air TV channels.
• Auto Scan: To auto scan the TV and DTV channels. Press ENTER to start auto scanning
Air and Cable TV channels. Press MENU again at any time to interrupt scanning.
• Channel Skip: Press ENTER to skip the channel. To restore the channel, press ENTER
• MTS: To select audio mode from Mono, Stereo, or SAP when available.
• Audio Language: To select audio language from English, Spanish, or French.
Setup Menu — To set up OSD window
In TV, AV, S-Video, YPbPr 1, YPbPr 2, HDMI 1, HDMI 2 source:
Note: When in AV, S-Video, YPbPr 1, YPbPr 2, HDMI 1 or HDMI 2 source, the TV option on
the left does not appear.
In VGA source:
• OSD Language: To select an OSD language from English, Spanish or French.
• Aspect Ratio: To select image size between No scale, Normal, Full, Letterbox, Zoom, and
• Blue Mute: To set the background color to blue when there is no signal.
• Time Setup: To set Time Zone, Time, Sleep Timer, and Auto Sleep.
*Time Zone: To select the time zone appropriate to your location.
*Time: To set the current time.
Auto Synchronization: When “Auto Synchronization” is enabled, the date and time will
be automatically synchronized according to the program content.
Timer: To set power-on and power-off time.
*Sleep Timer: To set the off timer from 10~120 minutes.
*Auto Sleep: To set the off timer for longer intervals -- 1 hour, 2 hours, or 5 hours.
• Close Caption: To set close caption options.
*Analog Closed Caption: To set basic analog closed caption options. (CC1~CC4,
*Digital Closed Caption: To select closed caption signal formats and set up caption
modes for digital TV channels. (Service1~6, Off)
*Digital Caption Style: Press ◄► to select Caption Style from “As Broadcaster” or
“Custom”. When “Custom” is selected, use ▲▼ to select the desired controls, ◄► to
adjust detailed settings.
Font Size: To select a font size from Large, Small, or Medium.
Font Color: To select a font color from Black, White, Green, Blue, Red, Cyan, Yellow, or
Font Opacity: To select font opacity from Solid, Translucent, or Transparent.
Background Color: To select background color.
Background Opacity: To select background opacity.
Window Color: To select window color.
Window Opacity: To select window opacity.
• Memory Recall: To restore the factory default settings.
Parental Menu — To set up Parental Control options
It is active in all input sources; however, when in AV, S-Video, YPbPr 1, YPbPr 2,
HDMI 1, HDMI 2, or VGA source, the TV option on the left does not appear.
Enter password and the screen below will show. (The default password is 0000.)
• Channel Block: To block channels. Use ▲▼ to select the channel you want to block, and
then press ENTER to block or unblock it.
• Program Block: To set TV and Movie Ratings.
*Rating Enable: Choose “On” to enable the below settings.
*U.S. TV Ratings: To adjust TV blocking level in the US. You can select between TV-Y,
TV-Y7, TV-G, TV-PG, TV-14, or TV-MA.
The TV Ratings in the US are defined as following.
TV-PG Parental guidance suggested
All children
TV-Y7 Directed to older children: this
program is designed for children
age 7 and above
TV-MA Mature audience only
General audience
Parents strongly cautioned: this
program contains some material
that is unsuitable for children
under 14 years of age
Use ENTER button to block or unblock the ratings, and use MENU to exit.
*U.S. Movie Ratings: To adjust movie blocking level in the US. You can select between G,
PG, PG-13, R, NC-17, or X.
The movie Ratings in the US are defined as following.
General audience
Parental guidance suggested
NC-17 No one 17 and under limited
PG-13 Parents strongly cautioned
Adult audience only
*Canadian English Ratings: To adjust blocking level in English-speaking region of
Canada. You can select between C, C8+, G, PG, 14+, 18+.
*The Canadian English Ratings are defined as following.
Parental guidance
Children eight years and older
Viewers 14 years and older
General programming, suitable for
all audiences
Adult programming
Use ENTER button to block or unblock the ratings, and use MENU to exit.
*Canadian French Ratings: To adjust blocking level in French-speaking region of
Canada. You can select between G, 8 ans +, 13 ans +, 16 ans +, 18 ans +.
The Canadian French Ratings are defined as following.
16 ans + Not appropriate for children of
less than 16 years
8 ans +
Children eight years and older
18 ans + Reserved to adults
13 ans + Not appropriate for children of less
than 13 years
Use ENTER button to block or unblock the ratings, and use MENU to exit.
*Block Unrated: To block unrated movie or TV programs.
Use ENTER button to block or unblock the ratings, and use MENU to exit.
• Input Block: To set the input source to be blocked. Users will not be able to watch the
content coming from the blocked input source.
Use ENTER button to block the input source, and press ENTER again to unblock.
• Change Password: To change the password, press ENTER, and the following screen
Enter the new password from the remote control, and then enter the new password again
to confirm.
Note: Please make sure you remember your new password after changing, because you
cannot recall the default setting of the password by any selection.
• Clear All: To clear all the locks set before, press ENTER, and then select “OK” to confirm.
Other Information
Color Filter
Glass surface
Input signal
37.02” TFT Active Matrix RGB
0.6 (H) x 0.6 (V) mm pixel
RGB vertical stripe
RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate
fh: 30-82 kHz, fv:50-75 Hz
TV system Antenna / NTSC+ATSC, TV cable
system / CATV+Digital cable
1 composite RCA, 1 S-Video,
2 YPbPr component, 2 HDMI
1 mini-stereo, 4 pair of RCA (L/R) stereo
Up to 1360 x 768 Non-interlaced
and supported
1360 x 768 @ 60 Hz
1280 x 1024 @ 60 Hz
1280 x 768 @ 60 Hz
1024 x 768 @ 60, 75 Hz
800 x 600 @ 60, 75 Hz
640 x 480 @ 60, 75 Hz
Speaker Output
10W x 2 @ THD=10%
Audio Output
1 stereo RCA jack, 1 SPDIF (optical),
1 Headphone jack
100-240 VAC, 50/60 Hz (auto switch)
Display area
Full Scan
819.6mm (H) x 460.8mm (V)
32.3” (H) x 18.1” (V)
Operating conditions
32°F to + 104°F ( 0°C to + 40°C)
20% to 65% (no condensation)
To 10,000 feet (3,000m)
Storage condition
-4°F to + 140°F (-20°C to + 60°C)
10% to 90% (no condensation)
To 40,000 feet (12,000m)
941.1mm (W) x 725.8mm (H) x 294.6mm (D)
37.1’’ (W) x 28.6’’ (H) x 11.6’’ (D)
31.4 kg (69.08 Ib)
Power consumption
UL/cUL, FCC-B (Doc-B), NOM, BETS-7
Stand by
< 200 W (blue LED)
< 3 W (amber LED)
Preset Timing Mode (Pre-adjusted to GTF® 1360 x 768 @ 60 Hz)
Warning: Do not set the graphics card in your computer to exceed these refresh rates;
doing so may result in permanent damage to the LCD TV.
Note: Product Specifications are subject to change without notice.
No power
• Make sure the LCD TV is properly connected.
• Make sure the AC power cord is properly connected.
• Make sure the AC power is ON, DC power button is ON (Blue LED).
• Plug another electrical device (like a radio) to the power outlet to verify that the outlet is
supplying the proper voltage.
Poor or no picture
• The TV station may be experiencing problems. Try another channel.
• The Cable TV signal may be scrambled or encoded. Please contact your local cable
• Make sure that connection to other components are correct.
• Make sure that setup has been done correctly after connections.
• Make sure the correct input is selected and the input signal is compatible.
Strange color, light color, or color misalignment
• Ensure that the video cable is securely connected.
• The picture may appear dim in a brightly lit room.
• Adjust brightness and contrast.
• Check the input signal setting.
No sound
• Check your audio connections
• The MUTE button may have been pressed, try pressing this button again.
• Check your audio settings, your TV audio may be set to minimum.
• Press the Volume + (Up) button on the remote control.
Remote control unit does not operate
• Make sure batteries are inserted correctly.
• Batteries could be weak or dead. Replace batteries.
• Is a fluorescent light illuminated near the remote control sensor?
• The path of the remote control beam may be blocked. Make sure the path is clear and that
the remote control is aimed at the remote control sensor on the TV.
• Press only one button at a time and it is the correct one for the operation you want to
Unit cannot be operated
• External influences such as lightning or static electricity may cause improper operation.
In this case, operate the unit after first turning on the power of the LCD TV and the AVC
System, or unplug the AC cord for 1 to 2 minutes, then replug again.
Power is cut off suddenly
• Is the sleep timer set?
• The internal temperature of the unit has increased. Remove any objects blocking the vent
or clean as necessary.
No CATV reception (or no reception above CH13)
• Is the AIR/CABLE option set correctly? Please set the AIR/CABLE option to CABLE.
• CATV is connected improperly or not connected; please check all the CATV connections.
• The cable TV service is interrupted; please contact your cable operator.
Picture is cut off/with sidebar screen
• Is the image positioned correctly?
• Are screen mode adjustments such as picture size set correctly?
Customer Support
For technical support or product service, see the table below or contact your reseller.
Web Site
United States
T= (800) 688 6688
F= (909) 468 1202
T= (866) 463 4775
Note: You will need the product serial number.
Limited Warranty
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty
period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole option
repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or
How long the warranty is effective:
ViewSonic LCD TV are warranted for one (1) year for all parts excluding the light source and one (1) year for labor from the date of
the first customer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electric power fluctuations or failure.
f. Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the
product for an extended period of time.
4. Removal, installation, and set-up service charges.
5. When you mount it on the wall, the following must be noticed:
a. The accessories attached with this product are applicable for this product only.
b. When the product is mounted on the wall, holes and fixed screws will remain in the wall body.
c. Wall face may discolor when this product has been mounted on the wall for a long time.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support. You will need to provide your
product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d)
a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of
merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product,
loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other
commercial loss, even if advised of the possibility of such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do
not allow limitations on implied warranties and/or do not allow the exclusion of incidental or consequential damages, so the above
limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local
ViewSonic dealer.
The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan Excluded) is subject to the terms and
conditions of the Maintenance Guarantee Card.
1 of 1
LTV_LW01 Rev. 1B 06-30-06
4.3: ViewSonic LCD TV Warranty
Download PDF