null  null
Industrial enclosures:
In stainless
steel
●
●
●
Compact enclosures
Enclosures and support
arm systems for the
human / machine interface
Large enclosures
g
3
d in 2 0 0
u
l
In c tio n s
o va
In n
R
Rittal – system partners
Perfect holistic solutions
Be it automation, communications or power supply technology, Rittal
offers the right enclosures and cabinets to suit virtually all requirement
profiles in modern industrial engineering. As you would expect, the
range is also available in stainless steel with extremely high
specifications on hygiene and corrosion resistance.
Ingeniously designed system
platforms in conjunction with an
R
extensive range of system
accessories provide the basis for
the exceptional solution diversity
of the Rittal stainless steel range.
Allow us to advise you.
We are happy to work to your
requirements.
Demand-oriented production
Global customer proximity
Regardless of where your products are
developed, manufactured or used, we
are at your service.
Fresh milk, new car paint, important medication; however varied the demands placed on stainless steel
enclosures may be, we have the right solutions to
accommodate them. What is more, we are constantly
extending our expertise, by building on development
work in close dialogue with our customers.
:
ng e
m
e ra
h
y s te
t
to
re s 52 – 57
u
w
s
e
o
N
ncl
age ,
l
op e e p
● T S 8, se Pane 1
T
i u m 3 0 /3 g e o f s
m
e
t
e
r
● P e e p a g id e ra n p o n e n .
s
m
w
s
n
o
a r y c lu tio
lu s
● P ccesso um so
a
p tim
fo r o
Overview of diversity
Quality for your success
4–5
Integral systems
Meeting demands & cutting costs
6–7
Production and service
Meeting individual requirements
8–9
Product combinations
Ideas for new solutions
10 – 11
Compact enclosures
Accessories
12 – 23
24 – 27
Enclosures for the human/
machine interface
Accessories
28 – 47
48 – 49
Large enclosures
Accessories
50 – 61
62 – 69
System accessories
in Rittal Catalogue 30
70 – 71
Enclosure climate control
System benefits
72 – 73
Individual solutions
to perfection
74 – 75
Search and find:
Order numbers,
index
76 – 77
Countless possibilities
The use of system accessories is
the first step towards rational system integration.
The second step is afforded by a
broad range of modules for climate
control, electronics, IT networks
and power distribution. The result?
Holistic individual solutions, which
are both perfect and cost-effective.
3
Overview of diversity
Quality for your success
R
You define your requirements
Quality is the key
– Rittal has the solution!
. . . and at Rittal it is constantly being improved,
thanks to on-going quality
assurance in our accredited QA laboratory.
The system diversity offered
by us is exemplary. It is the
cumulation of expertise gleaned from countless discussions with customers.
The result? Fast, reliable solutions available off
System integration included
the shelf, immediately – and assembled ready
for use upon request.
Work more effectively, easily and reliably
Success is down to the
individual. Rittal offers
effective support through
its products.
The basic fittings of
every enclosure lend
themselves to a wide
range of external and
internal mounted parts.
Enclosures for the human / machine interface
4
Premium Panel
Command Panel
Command Panel
housing with door
Support arm
system/stand
system
AP one-piece
consoles
AP universal
consoles
Dimensions
for installed equipment 482.6 mm
(19˝)/7 U,
120 and 220 mm
deep, optionally
with keyboard
housing for
482.6 mm (19˝)/4 U
2 sizes
320/240/160 mm
and
400/320/160 mm
4 sizes
300/300/150 mm
to
600/400/150 mm
Various support
arm components
for enclosures KL,
AE and CP
4 sizes
600/960/400 mm
to
1200/960/400 mm
Size
600/1300/500 mm
Page 30/31
Page 32/33
Page 34/35
Page 36 – 41
Single or doubledoor
With tall or short
front door and
clearance for desk
section or drawer
Page 42/43
Page 44/45
Rittal Stainless steel brochure
Compact enclosures
Terminal boxes KL
Bus enclosures
BG
Compact
enclosures AE
Premium Line
KL
6 sizes
150/150/80 mm
to
300/300/120 mm
5 sizes
200/300/80 mm
to
600/200/123 mm
15 sizes
200/300/155 mm
to
1000/1200/300 mm
4 sizes
150/150/80 mm
to
400/300/120 mm
Cover, screw
fastened
Hinged door with
screw fastener
One-door or twodoor, lockable door
with double-bit lock
insert
Cover, screw
fastened
Page 14/15
Page 16/17
Page 18/19
Page 22/23
Large enclosures
PC enclosure
systems
TS 8 baying
systems
Free-standing
enclosures ES
Size
600/1600/620 mm
8 sizes
800/1800/400 mm
to
1200/2000/600 mm
6 sizes
600/1600/400 mm
to
1200/2000/500 mm
Single or doubledoor
Single or doubledoor
Page 54/55
Page 58/59
With viewing window and drawer or
desk section
Page 46/47
Rittal Stainless steel brochure
5
Integral systems
Meeting demands and cutting costs
R
With over 8,000 precision products
available worldwide, Rittal is a superior
systems supplier. The spectrum ranges
from standardised mass production to
customised individual solutions.
Our concept:
Uniform system platforms
Differentiated installation levels
Cost-efficient versatility
High standards of quality
All this from your one-stop suppliers. As competent system
partners, we work with you to develop holistic solutions
which are both perfect and cost-effective, tailored to your
specific requirements.
IT solutions
Power
distribution
Electronic systems
● All components for
data & communications networks.
● Also available for
stainless steel cases
and enclosures with
482.6 mm (19˝) and
metric installation.
● From connection systems to
isolators.
● Busbar systems in 40, 60, 100,
150 and 185 mm bar centre
distance
● Systems up to 3200 amps.
● MPS microcomputer packaging
systems
● Subracks
● Cases for industrial PCs.
6
System climate control
● Integral cooling technology
● Roof- and wall-mounted cooling
units
● Recooling systems
● Air/water heat exchangers
● Air/air heat exchangers
● Fan-and-filter units
● Rack-mounted climate control
● Heaters
System accessories
User-friendly
Early warning . . .
Modular solution diversity
e.g. with system lights,
socket strips, wiring plan
lecterns etc.
Signal pillars – just one example
of safety. We also offer a full
range of lock and monitoring
systems.
Outstanding:
All enclosures from the TS 8 system platform offer infinite
possibilities for interior installation.
Rittal Stainless steel brochure
7
Production and service
Meeting individual requirements
R
As global players, we boast many years of
experience in international markets.
With 19 production sites, 45 subsidiaries
and over 70 branch offices in 5 continents,
we are always close at hand.
Customer proximity regionally and worldwide
Innovative production techniques at the Wissenbach
stainless steel factory ensure a successful symbiosis
between individual solutions and cost-effective, topquality mass production. Stainless steel is a special
material which demands the special expertise offered
by our team.
Uncompromisingly
high quality
Individual solutions –
off the shelf
Excellent benefits from
standardised quality
Particularly for customers
who require small batches
in individual sizes or cutouts in enclosure and case
surfaces, laser technology
covers all the options for
cost-effective implementation of specific requirements.
Cost-effective products in an
exemplary quality are the
result of innovative mass production. For example, we
have developed special techniques for shaping and welding. One outstanding example is the 16-fold profiled
stainless steel section in the
TS 8 Top enclosure system,
with its infinite installation possibilities.
At Rittal, quality is not
defined by a one-off certificate, but is instead an ongoing process.
Every day, our products are
put through their paces at
our in-house laboratories.
This includes EMC testing,
climatic chambers, load
tests, 3D measurement,
dust testing and hosed
water tests, as well as electrical safety testing.
9
Product combinations
Ideas for new solutions
R
Leave the conventional path behind!
Combine standard products in a new way
to meet your requirements, and significantly broaden the range of options
available.
Here are just a few suggestions.
Example 1
Console with rotating operating housing
Consisting of:
● Command panel housing
with door,
see page 34/35
● Housing coupling, rotating,
see page 37
● Support section,
see page 36
● Wall/base mounting,
see page 38
● Wall console,
see page 40
● One-piece console,
see page 42
10
Example 2
Enclosure attached to a machine
Consisting of:
● AE compact enclosure,
see page 18/19
● With wall console, also suitable for
cable entry, see page 40
Example 3
Mini operating unit
Consisting of:
● Premium Line KL,
see page 22/23
● With support arm system,
see page 36
Example 4
Enclosure combination
Consisting of:
● Electronic Kombi system EL
(on request)
● With bus enclosure BG,
see page 16/17
Example 5
Mini operating console
Consisting of:
● Terminal box KL,
see page 14/15
● Two enclosure attachments,
see page 37
● Support section,
see page 36
● Pedestal base plate, small,
see page 41
Industrial Workstations IW
Outside of the Rittal stainless
steel enclosure range, this is an
example of solution diversity
with the most varied product
combinations.
Take a look at the IW brochure,
and allow yourself to be
inspired with new solutions
from this modular system.
11
Compact enclosures
Like the entire stainless steel range, our small and mediumsized models are ideal for all segments of industry with
superior demands in terms of hygiene and corrosion
protection.
They offer the correct volume to suit every requirement,
together with practical fittings and accessory components
for every application.
Rittal always has the solution you need. Every design
innovation helps to save your valuable time, whilst every
standard mounting part helps to cut costs.
Terminal boxes KL
● Screw-fastened cover
● Integral profile strip with
mounting holes for top-hat
rails or mounting plate
● Enclosure sealed all-round
Bus enclosures BG
Terminal boxes KL (Protection category IP 66)
W mm
H mm
D mm
Model No. KL
150
150
80
1521.010
300
200
300
400
300
150
200
200
200
300
80
80
80
120
120
1522.010
1523.010
1524.010
1525.010
1526.010
Page
● Hinged lid secured with
screw fastenings
● Including support rail
TS 35/7.5
● Enclosure sealed all-round
14/15
Bus enclosure BG (Protection category IP 66)
W mm
H mm
D mm
Model No. BG
200
300
80
1583.010
300
300
80
1584.010
400
300
80
1585.010
400
200
123
1558.010
600
200
123
1559.010
12
Page
16/17
Rittal Stainless steel brochure
Compact enclosures AE
● Door(s) with 3 mm double-bit
lock insert
● Including mounting plate
● Enclosure sealed all-round
Premium Line KL
● Screw-fastened lid for stringent requirements in the
food and hygiene sectors
● Threaded bolts for the installation of support rails, mounting brackets and mounting
plates
● Enclosure sealed all-round
Premium Line KL (Protection category IP 69K)
W mm
H mm
D mm
Model No. KL
150
150
80
1024.010
150
150
120
1024.020
300
200
120
1024.030
400
300
120
1024.040
Page
22/23
Compact enclosures AE (Protection category IP 66)
W mm
H mm
D mm
Model No. AE
200
300
155
1002.600
380
300
155
1004.600
300
380
210
1005.600
380
380
210
1006.600
500
500
210
1007.600
500
500
300
1013.600
380
600
210
1008.600
600
380
210
1009.600
600
600
210
1010.600
600
760
210
1012.600
760
760
300
1014.600
800
1000
300
1016.600
800
1200
300
1017.600
(Protection category IP 55)
1000
1000
300
1018.600
1000
1200
300
1019.600
Page
18/19
The enclosure Model Numbers listed here apply to variants in 1.4301 (AISI 304).
For the variant in 1.4404 (AISI 316L) the Model Number can be found on the
respective product page.
Terminal boxes
KL
Bus enclosures
BG
Compact enclosures
AE
UL
●
●
●
CSA
●
●
●
TÜV
●
●
●
Germanischer Lloyd
●
–
●
Norske Veritas
●
●
●
Russian Maritime Register
of Shipping
●
●
●
Lloyds Register of Shipping
●
●
●
Bureau Veritas
●
●
●
VDE
●
●
●
Approvals
Rittal Stainless steel brochure
13
80
120
15
15
B1
H3
20
H2
H4
H4
15.5
37.5
29
12.5
12.5
M5
20
Ø 4.6
29
H2
H1
H3
B5
15.5
T1 = 120
T1 = 80
Detail X
T1 = 120
Detail Y
T1 = 80
93.6
B4
X
20
20
14
14
i. L. = B2
M6 x 12
B4
20
Y
i. L. = B2
39.5
63
12.5
79.5
103
53.6
T1 = 120
12.5
47.5
B3
B3
20
T1 = 80
i.L. = Clearance width
Supply includes:
Enclosure, cover with all-round foamed-in
PU seal and cover screws, including plastic bushes.
Packs of
Width (B1) in mm
Height (H1) in mm
Depth (T1) in mm
Model No. KL
B2 = Clearance opening width
B3 = Cover width
B4 = Clearance width between profile strips
B5 = Hole-centre distance of profile strips
H2 = Clearance opening height
H3 = Cover height
H4 = Clearance height between profile strips
Weight (kg)
Cover screws
Accessories
Mounting plate KL
Wall mounting bracket KL
Wall angle SZ
Pole clamp SZ
Support rails TS 35/7.5 SZ
Page
150
150
80
1521.010
132
148
109
125
132
148
100
1.3
4
300
150
80
1522.010
282
298
259
275
132
148
100
1.8
4
200
200
80
1523.010
182
198
159
175
182
198
150
1.8
4
300
200
80
1524.010
282
298
259
275
182
198
150
2.4
4
400
200
120
1525.010
382
398
359
375
182
198
150
3.6
4
300
300
120
1526.010
282
298
259
275
282
298
250
3.9
4
1
4
1
1
1560.700
1561.700
1562.700
1563.700
1594.000
2583.000
2584.000
1564.700
1567.700
10
2314.000
2316.000
2315.000
2317.000
2316.000
1
2316.000
27
26
26
25
Cat. 30
983
To order terminal boxes in 1.4404 (AISI 316L), please change the last three digits of the Model No. to .510. Delivery times available on request.
14
Rittal Stainless steel brochure
Terminal boxes KL
Punching for wall mounting
bracket.
Enclosure with slotted profile
strips, some tapped.
Resistant sealing ring for screw
fastening.
Accessories:
see page 24 – 27
and page 70/71
or refer to index.
Material:
Stainless steel 1.4301
Box: 1.25 mm
Cover: 1.25 mm
Surface finish:
Box and cover:
Brushed, grain 180
Protection category:
IP 66 to EN 60 529/10.91
Complies with NEMA 4x
Support rails to accommodate
terminal blocks and electrical
equipment.
See Cat. 30, page 983.
Rittal Stainless steel brochure
Housing coupling
For attaching the 120 mm deep
KL to the support arm system..
See page 37.
Mounting plate
For component mounting even
outside of the box.
See page 27.
15
BG 1558.010 / BG 1559.010
BG 1583.010 / BG 1584.010 / BG 1585.010
i. L. 77
80
36.5
123
i. L. 118
1
i.L. = Clearance width
400/600
20.5
M5 x 8
135
20
20
1
200
3
12.5
300
2
40
40
80
20
2 x M5 x 8
40
55
23
200/300/400
M6 x 15
3 = Support rail TS 35/7.5
20
1 = Only for BG 1559.010
2 = Support rail TS 35/7.5
Supply includes:
Enclosure with 1 support rail
TS 35/7.5,
lid with foamed seal,
180° hinges,
with quick-release fasteners.
Packs of
Width in mm
Height in mm
Depth in mm
Model No. BG
Weight (kg)
Accessories
Wall mounting bracket KL
Pole clamp SZ
1
300
300
80
1584.010
3.7
1594.000
2584.000
400
300
80
1585.010
4.5
400
200
123
1558.010
4.5
600
200
123
1559.010
6.0
26
25
Cat. 30
Condensate discharge SZ
6
2459.000
2459.000
900
To order bus enclosures in 1.4404 (AISI 316L), please change the last three digits of the Model No. to .500. Delivery times available on request.
16
4
1
Page
200
300
80
1583.010
2.8
1594.000
2584.000
Rittal Stainless steel brochure
Bus enclosures BG
180° hinges made from die-cast
zinc, plated.
Support rail adjustable on profile
strip (with BG 1558.010,
BG 1559.010).
Support rail secured on studs
(with BG 1583.010, BG 1584.010,
BG 1585.010).
Accessories:
see page 24 – 27
and page 70/71
or refer to index.
Material:
Stainless steel 1.4301
Box: 1.25 mm
Cover: 1.25 mm
Hinges:
Die-cast zinc
Surface finish:
Box and cover:
Brushed, grain 180
Hinges: Plated
Protection category:
IP 66 to EN 60 529/10.91
Complies with NEMA 4x
Modification:
Viewing window for I/O
displays
Holes for screw connections
Other designs
available on request.
Rittal Stainless steel brochure
Wall mounting bracket
For secure attachment of
enclosures.
See page 26.
Pole clamp
For fastening to round or
square poles.
See page 25.
EMC cable glands
With special ring for 360°
contact.
See Cat. 30, page 894.
17
AE 1017.600
AE 1018.600 / AE 1019.600
1000
800
300
8
495
495
280
1
i.L. 1160 (i.L. 960)
1200
i.L. 1160
1200 (1000)
260 – 275
2
i.L. 760
i.L. 960
1 = Cam lock for AE 1018.600
2 = Locking rod for AE 1019.600
Dimensions in brackets for AE 1018.600
i.L. = Clearance width
AE 1002.600 – AE 1016.600
B
T
H
3
Detailed drawings
page 20/21.
20
3 = For AE 1002.600, AE 1004.600, AE 1005.600, AE 1006.600,
AE 1009.600 only one cam lock in the centre
Width (B) in mm
Height (H) in mm
Depth (T) in mm
Model No. AE
Doors
Weight (kg)
Accessories
Rain canopy SZ
Wall mounting bracket SZ
Wall angle SZ
Pole clamp SZ
Cam lock of 1.4301 SZ
Packs of
Width (B) in mm
Height (H) in mm
Depth (T) in mm
Model No. AE
Doors
Weight (kg)
Accessories
Rain canopy SZ
Wall mounting bracket SZ
Wall angle SZ
Pole clamp SZ
Cam lock of 1.4301 SZ
Packs of
1
1
4
1
1
1
1
1
4
1
1
1
200
300
155
1002.600
1
4.5
380
300
155
1004.600
1
8.8
300
380
210
1005.600
1
8.7
380
380
210
1006.600
1
12.0
500
500
210
1007.600
1
18.4
2470.000
2471.000
2361.000
2472.000 2362.000
2433.000
2583.000
2584.000
2304.000
500
500
300
1013.600
1
18.9
380
600
210
1008.600
1
17.0
600
380
210
1009.600
1
17.0
Page
–
2472.000
2473.000
25
26
26
25
24
600
600
210
1010.600
1
25.0
600
760
210
1012.600
1
31.7
760
760
300
1014.600
1
42.5
800
1000
300
1016.600
1
52.9
800
1200
300
1017.600
1
70.0
1000
1000
300
1018.600
2
71.0
1000
1200
300
1019.600
2
85.0
2473.000
2473.000
2474.000
2475.000
2363.000
2363.000
2584.000
2304.000
2584.000
2304.000
–
2304.000
2475.000
2433.000
2583.000
–
2304.000
–
–
–
–
–
–
25
26
26
25
24
Lock systems
In enclosures fitted with a cam lock, the standard double-bit lock insert (except for AE 1018.600 / AE 1019.600) may be exchanged for a 41 mm lock insert,
security cylinder insert, plastic handle, T-handles, design C, see Cat. 30, page 940 – 943.
With AE 1018.600, may only be exchanged for 41 mm lock inserts.
In enclosures with a locking rod, may be exchanged for 27 mm lock inserts, design A, see Cat. 30, page 942 and
Ergoform-S lock system, see Cat. 30, page 939.
To order compact enclosures in 1.4404 (AISI 316L), please change the last three digits of the Model No. to .500. Delivery times available on request.
18
Rittal Stainless steel brochure
Compact enclosures AE
Enclosure protection channel
prevents the ingress of dirt and
water when the door is opened.
To dismantle the door, the hinge
pin is simply pulled out.
Accessories:
see page 24 – 27
and page 70/71
or refer to index.
Supply includes:
Enclosure, door(s) with
foamed-in seal, mounting plate.
Material:
Stainless steel 1.4301
Enclosure and door:
Stainless steel
Mounting plate: Sheet steel
Cam lock: Die-cast zinc,
nickel-plated
Surface finish:
Enclosure and door:
Brushed, grain 180
Mounting plate: Zinc-plated
Protection category:
IP 66 to EN 60 529/10.91
for AE 1002.600 – AE 1017.600,
complies with NEMA 4x.
IP 55 to EN 60 529/10.91
for AE 1018.600 / AE 1019.600,
complies with NEMA 12.
Rittal Stainless steel brochure
Lock cover
Prepared for padlock or
multiple lock.
See Cat. 30, page 945.
Lock inserts
See Cat. 30, page 942.
Rain canopies
For protection against direct
water inflow.
see page 25.
19
AE 1002.600 – AE 1016.600
B1
2.5
100
2.5
2.5
M6 x 12
H2
H1
H3
T2
3
1
H4
B4
2
B3
100
75
75
20
20
2.5
B2
20
T1
1 = For AE 1002.600, AE 1004.600,
AE 1005.600, AE 1006.600,
AE 1009.600 only one cam lock
in the centre and no central bolts
2 = 50 for AE 1002.600
3 = Does not apply to AE 1002.600
Mounting plates
AE 1002.600
AE 1004.600 – AE 1016.600
122
9
Ø
G1
G2
225
260
275
9
6.5
122
138
10
162
90
F2
F1
Installation position of the mounting plate is rotated
through 90° for AE 1005.600
Compact enclosures AE
Dimensions of enclosures
Model No. AE
1002.600
1004.600
1005.600
1006.600
1007.600
1013.600
1008.600
1009.600
1010.600
1012.600
1014.600
1016.600
20
B1
200
380
300
380
500
500
380
600
600
600
760
800
B2
167
340
260
340
460
460
340
560
560
560
720
760
B3
–
250
175
250
375
375
250
475
475
475
625
675
B4
56
66
66
66
66
66
66
66
66
66
66
66
H1
300
300
380
380
500
500
600
380
600
760
760
1000
H2
295
295
375
375
495
495
595
375
595
755
755
955
H3
274
260
340
340
460
460
560
340
560
720
720
960
H4
225
225
275
275
425
425
525
275
525
675
675
925
T1
155
155
210
210
210
300
210
210
210
210
300
300
T2
135
113 – 129
168 – 184
168 – 184
168 – 184
258 – 274
168 – 184
168 – 184
168 – 184
168 – 184
258 – 274
258 – 274
G1
–
275
275
355
470
470
570
355
570
730
730
955
Dimensions of
mounting plate
G2
F1
–
–
250
334
250
334
330
334
445
449
445
449
545
334
330
549
545
549
705
549
705
704
930
739
Material thicknesses in mm
F2
–
295
295
295
410
410
295
510
510
510
665
700
Enclosure
1.25
1.38
1.38
1.38
1.38
1.50
1.38
1.38
1.38
1.38
1.50
1.50
Door
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
Mounting plate
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
2.5
3.0
3.0
3.0
Rittal Stainless steel brochure
Compact enclosures AE
Dimensions in detail
AE 1018.600 / AE 1019.600
800
1000
2.5
795
300
495
2.5
M6 x 12
M6 x 12
280
2.5
495
46.5
2.5
2.5
AE 1017.600
54
1
260 – 275
i. L. 1160 (960)
1125 (925)
2
1125 (925)
1200 (1000)
1200
1125
i. L. 1160
35
49
20
20
i. L. 760
20
375
375
75
75
75
75
i. L. 960
20
50
675
75
1 = Cam lock for AE 1018.600
2 = Locking rod for AE 1019.600
Dimensions in brackets are for AE 1018.600
i.L. = Clearance width
3.5 (2.5)
585
585
45
1194 (995)
30.5
Mounting plates
AE 1018.600
AE 1017.600 / AE 1019.600
520 (720)
12.5
1130
1150
G1
G2
12.5
10
90
F2
F1
700 (900)
18
740 (940)
Dimensions in brackets are for AE 1019.600
Compact enclosures AE
Model No. AE
1017.600
1018.600
1019.600
Dimensions of enclosures
B1
H1
800
1200
1000
1000
1000
1200
Rittal Stainless steel brochure
T1
300
300
300
G1
–
955
–
Dimensions of mounting plate
G2
F1
–
–
930
939
–
–
F2
–
900
–
Material thicknesses in mm
Enclosure
Door
Mounting plate
1.50
2.0
3.0
1.50
2.0
3.0
1.50
2.0
3.0
21
Rear panel attachment
detail
B1
20
26.5
T3
T2
T1
20
Welded stud
M5 x 8 (6 x)
H3
H2 (i.L.)
Earthing bolts M6 x 15
40
Earthing bolts
M6 x 15
51.5
H1
M8
40
B3
B2 (i.L.)
i. L. = Clearance width
B1 = Overall width in mm
Packs of
150
150
300
400
H1 = Overall height in mm
150
150
200
300
T1 = Overall depth in mm
80
120
120
120
Model No. KL
1
1024.010
1024.020
1024.030
1024.040
B2 = Clearance width of enclosure
103
103
253
353
B3 = Distance between axes of bolts
75
75
225
325
H2 = Clearance height of enclosure
103
103
153
253
H3 = Distance between axes of bolts
75
75
125
225
T2 = Clearance depth, enclosure only
51.5
91.5
91.5
91.5
T3 = Clearance depth
77
117
117
117
Possible mounting depth:
60
100
100
100
T4 = Mounting plate configuration, see mounting plate
T5 = Support rail configuration – see mounting bracket
69.5/54.5
109.5/94.5
109.5/94.5
109.5/94.5
Number of lid screws
4
4
6
10
Accessories
Support rail TS 35/7.5 SZ
10
2314.000
2314.000
2316.000
2317.000
To order Premium Line KL in 1.4404 (AISI 316L), please change the last three digits of the Model No. to 5X0. Delivery times available on request.
Mounting plate
For installation with spacer bolts, including
drilled holes for earthing.
Material:
Sheet steel, zinc-plated, passivated
Supply includes:
Including assembly screws and earthing
material.
Mounting plate
attachment
For
enclosure
1024.010
1024.020
1024.030
1024.040
Packs Model No.
of
KL
B5
H5
100
100
1
1024.910
250
350
150
250
1
1
1024.920
1024.930
B5
B3
T4
H5
H3
25
Spacer bolts
M5 x 15
Mounting bracket
For attaching support rails on a 12.5 mm
pitch pattern.
Material:
Stainless steel 1.4301
Supply includes:
Including assembly parts
Packs Model No.
of
KL
B5
H5
85
6
1 set
1024.810
135
235
10
18
1 set
1 set
1024.820
1024.830
Variant 2:
Variable on a mounting
bracket
variable
Variant 1:
In the centre of
the rear panel
For
enclosure
1024.010
1024.020
1024.030
1024.040
L
15
22
H3
36.5
5.5
25
T5
T5
6
N x 12.5 = H3
Rittal Stainless steel brochure
Premium Line KL
The seal lies between two surfaces and is easily cleaned.
Depending on customer requirements, screw head on the outside . . .
. . . or plastic stoppers on the
outside with concealed screws
(included in the supply).
Material:
Stainless steel 1.4301, 1.5 mm
Rittal service:
Other sizes and other enclosures with this sealing concept
are available on request.
Cutouts and drilled holes to
your specifications.
Surface finish:
Brushed, grain 240
Protection category:
IP 69K to DIN 40 050-9/5.93
A new design, a new concept
for the seal and lock
● Resistant to high-pressure
cleaning (protection category IP 69K).
The seal lies between two
seals and is perfectly compressed by screw fastening
(see detailed drawing).
● Screw fastening for stringent
requirements in the food and
hygiene sectors.
With plastic stoppers on the
inside or hex screws on the
outside.
● Optimum EMC conditions.
The sealing labyrinth
achieves a particularly high
level of RF shielding of the
enclosure.
● Cover retainer on the inside.
This solution is clearly superior to external hinges from a
hygiene point of view.
● Wall mounting can be implemented directly from the rear
using M8 pull-in nuts, or from
the front using wall mounting
brackets.
Retainer for lid
in the extended position.
Model No. CP 6682.000.
Rittal Stainless steel brochure
Wall mounting bracket
KL 1594.000, see page 26.
23
Accessories
Compact enclosures
Cam lock
Complete cam lock with double-bit insert
for AE stainless steel enclosures (with cam
lock).
Packs of
1
Model No. SZ
2304.000
Packs of
1
Model No. SZ
2534.500
Material:
Stainless steel 1.4301
Supply includes:
Assembly parts included
Semi-cylinder lock
For retrospective mounting on all singledoor AE compact enclosures in stainless
steel with cam lock. The cover plate is
latched by semi-cylinders with a total
length of 40 or 45 mm (to DIN 18 254).
An extra cover protects the cylinder from
dirt.
The protection category of the enclosure is
not reduced.
Supplied without semi-cylinder.
Lock cover
For padlocks and multiple locks.
For retrospective mounting on all singledoor compact enclosures AE with cam
lock.
Lug with 11 mm diameter hole for padlocks
or multiple locks.
The protection category of the enclosure is
not reduced.
Material:
Die-cast zinc, plated (matt).
German patent no. 195 12 280
US patent no. 5,916,282
Jap. patent no. 3.088.465
European patent no. 0778 913
with validity for GB, FR, IT
Packs of
1
Model No. SZ
2493.000
Material:
Die-cast zinc, plated (matt).
Supply includes:
Lock cover
assembly parts included.
Accessories:
Multiple lock,
see Cat. 30, page 945.
24
Rittal Stainless steel brochure
Accessories
Compact enclosures
Rain canopies for AE
Reliable protection for outdoor siting – with
water run-off to the rear. Easily retrofitted.
Material:
Stainless steel 1.4301
Surface finish:
Brushed
Supply includes:
Including assembly parts
38
1.5
Model No.
SZ
211 160 180 65 2470.000
311 260 235 120 2361.000
391 340 180 65 2471.000
B1
B2 T1 T2
391 340 235 120 2472.000
511 460 235 120 2362.000
611 560 235 95
2473.000
771 720 325 185 2474.000
811 760 325 185 2475.000
1011 960 325 185 2363.000
Accessories:
B2
Condensate discharge,
see Cat. 30, page 900.
23
A
A
B1
23
T2
25
15.5
25
50
T1
Note:
For outdoor siting, as a general principle,
we recommend a rain canopy above the
enclosure or above the gap between the
door or screw-fastened rear panel and the
enclosure, in order to protect against water
and UV rays.
The tests of IP protection levels for water
protection (2nd code digit to EN 60 529)
should not be applied to enclosures sited
outdoors or in similar conditions.
Rain canopies for other enclosures available on request.
For AE
enclosures
1002.600
1005.600
1004.600
1006.600
1008.600
1007.600
1009.600
1010.600
1012.600
1014.600
1016.600
1017.600
1018.600
1019.600
Pole clamp
For reliable, convenient fastening to round
or square poles.
For pole diameter/size:
Ø from 40 up to 190 mm
□ from 50 up to 150 mm
Material:
Cross rails, clamping section:
Sheet steel, zinc-plated
Clamping strap:
Stainless steel 1.4301
Pole clamp
Model No. SZ
2584.000
Supply includes:
2 cross rails, 600 mm long,
4 clamping sections,
2 clamping straps,
4 clamping brackets,
4 screws and M8 nuts
for mounting on the enclosure.
German patent no. 36 10 152
Rittal Stainless steel brochure
25
Accessories
Compact enclosures
Wall mounting bracket
For fastening KL, EB and BG enclosures.
Material:
Stainless steel 1.4301
Wall distance
8 mm
Packs of Model No. KL
4
1594.000
See drawing A for dimensions
Wall mounting bracket
For fastening KL, EB, BG, AE and EL
enclosures.
Material:
Stainless steel 1.4301
Wall distance
10 mm
Packs of Model No. SZ
4
2433.000
See drawing B for dimensions
With stainless steel enclosures, additional
holes are required in the rear wall for
reasons of hygiene and because of the
protection category.
Wall angle
For compact enclosures (additional holes
required in the enclosure).
Simple mounting, no distance from the
wall.
Packs
Model No. SZ
of
Material
Stainless steel
1.4301
1
2583.000
See drawing C for dimensions
Wall mounting brackets / angles
Drawing A
Drawing B
Drawing C
20
54
15
15
20
10
13
90
20
26
20
R4
34
6.5
26
2
Ø 8.2
Ø 10.2
20
20
10
10
8
35
29
25
70
Rittal Stainless steel brochure
Accessories
Compact enclosures
Mounting plates for KL
For component mounting, even before
fitting in the enclosure. Assembly screws
included in the accessory of the enclosure.
Accessories:
Self-drilling screws SZ 2487.000,
see Cat. 30, page 969.
Material:
2 mm sheet steel
Possible
alternative:
Surface finish:
Zinc-plated
For dimensions
mm
F2
F2
6.6
12.5
150 x 150
8.2
14.5
42.5
200 x 150
1
300 x 150
400 x 150
G1
200 x 200
300 x 200
400 x 200
23.5
500 x 200
600 x 200
800 x 200
18.5
F1
1 = With 125 mm wide plates,
fastening is in the centre only
Rittal Stainless steel brochure
300 x 300
400 x 300
500 x 300
600 x 300
400 x 400
600 x 400
800 x 400
Support rails,
see Cat. 30, page 983.
F0r Model No.
KL 1500.210, KL 1514.210,
KL 1521.010
KL 1528.210, KL 1529.210
KL 1501.210, KL 1515.210,
KL 1522.010, KL 1530.210
KL 1589.210
KL 1502.210, KL 1516.210,
KL 1523.010
KL 1503.210, KL 1517.210,
KL 1524.010, KL 1531.210
KL 1504.210, KL 1518.210,
KL 1525.010, KL 1532.210
KL 1505.210, KL 1533.210
KL 1506.210, KL 1519.210,
KL 1534.210
KL 1527.210, KL 1542.210
KL 1507.210, KL 1526.010,
KL 1535.210
KL 1508.210, KL 1536.210
KL 1509.210, KL 1537.210
KL 1510.210, KL 1538.210
KL 1511.210, KL 1539.210
KL 1512.210, KL 1540.210
KL 1513.210, KL 1541.210
Dimensions in mm
G1
F1
F2
Model No.
KL
135
125
–
1560.700
185
125
–
1575.700
285
125
–
1561.700
385
125
–
1576.700
185
175
50
1562.700
285
175
50
1563.700
385
175
50
1564.700
485
175
50
1565.700
585
175
50
1566.700
785
175
50
1574.700
285
275
50
1567.700
385
485
585
385
585
785
275
275
275
375
375
375
50
50
50
62.5
62.5
62.5
1568.700
1569.700
1570.700
1571.700
1572.700
1573.700
27
Human / machine interface
When it comes to ergonomics and user-friendliness, operat-
These include rational enclosure population, versatile
ing housings (particularly in conjunction with the support
positioning of monitoring and control components, and
arm system), consoles and PC cases are capable of meet-
high-quality controllers with an outstanding design.
ing the most discerning demands.
Under the motto “Standardised, not customised”, Rittal
Machines with modern, flexible production technology need
offers complete solutions to boost productivity at the
solutions at the operating interface which meet their
interface between human and machine.
requirements precisely.
Premium Panel
● Screw fastened rear panel to
meet discerning requirements in the food and
hygiene sectors
● Support arm connection with
reinforcement plate optionally at the top or bottom
● With keyboard housing on
request
● Two duct connectors, also
suitable for cable routing
between the operating housing and keyboard housing
● All-round sealed enclosure,
with designer front
Premium Panel with keyboard housing (Protection category IP 69K)
Command panel W mm H mm D mm
Support arm
Model No. Page
connection
530
460
120
top
6680.000
530
460
120
bottom
6680.010
530
460
220
top
6680.100
530
460
220
bottom
6680.110
Keyboard
530
200
80/63
housing
Premium Panel without keyboard housing
(Protection category IP 69K)
30/31
530
360
120
6681.000
530
360
220
6681.100
Command Panel housing with door
Command Panel
● Front panel or rear panel
screw-fastened all round
● Support arm connection with
reinforcement plate at the
top/bottom by rotating the
enclosure
● All-round sealed enclosure,
projection over the front
panel to protect installed
equipment
Command Panel (Protection category IP 65)
W mm
H mm
D mm
Model No. CP
320
240
160
6670.000
400
320
160
6672.000
28
● Door 40 mm deep, left-hand
hinge, side handle strips
made from plastic approved
for use in the food industry
● Support arm connection with
reinforcement plate at the
top/bottom by rotating the
enclosure
● All-round sealed enclosure,
3 mm double-bit lock insert
on the right-hand side
Command Panel housing with door (Protection category IP 66)
Page
32/33
W mm
H mm
D mm
Model No. CP
300
300
150
6535.010
400
300
150
6536.010
400
400
150
6538.010
600
400
150
6539.010
Page
34/35
Rittal Stainless steel brochure
AP universal consoles
● Front doors with 3 mm
double-bit lock insert at the
bottom, optionally in tall or
short version for desk section or keyboard drawer
● Rear door with tubular door
frame and 3 mm double-bit
lock insert
● Depth-adjustable with
mounting plate
● Three-piece gland plates
● Enclosure sealed at the
sides and top, with 25 mm
system punchings
Universal consoles AP (Protection category IP 56)
AP one-piece consoles
W mm
H mm
D mm
Model No. AP
with short
front door
Model No. AP
with tall
front door
Page
600
1300
500
2688.600
2689.600
44/45
PC enclosure systems
● Door(s) and console lid with
3 mm double-bit lock insert
● With height-adjustable
mounting plate
● Two-piece gland plates
● Enclosure sealed at the
sides and rear
● Front doors with 3 mm
double-bit lock insert at the
bottom, viewing window at
the top
● With keyboard drawer or
desk section
● Rear door with tubular door
frame and 3 mm double-bit
lock insert
● Three-piece gland plates
● Enclosure sealed at the
sides and top, with 25 mm
system punchings
AP one-piece consoles (Protection category IP 55)
W mm
H mm
D mm
Model No. AP
600
960
400/480
2683.600
800
960
400/480
2684.600
1000
960
400/480
2685.600
1200
960
400/480
2686.600
PC enclosure systems (Protection category IP 55)
W mm
H mm
D mm
Model No. PC
with keyboard
drawer
Model No. PC
with
desk section
Page
610
1600
620
4650.000
4650.704
46/47
Page
42/43
The enclosure Model Numbers listed here apply to the variant in 1.4301 (AISI 304).
For the variant in 1.4404 (AISI 316L), the Model Number can be found on the
respective product page.
Command panel
Command panel
housing with door
AP one-piece
consoles
AP universal
consoles
PC enclosure
systems
UL
●
●
●
●
●
CSA
●
●
●
●
●
TÜV
–
●
●
●
●
Germanischer Lloyd
–
–
●
●
●
Norske Veritas
–
●
●
●
●
Russian Maritime Register
of Shipping
–
–
●
●
●
Lloyds Register of Shipping
–
–
●
●
●
Bureau Veritas
–
●
●
●
●
VDE
–
●
●
●
●
Approvals
Rittal Stainless steel brochure
29
Hex screw
external
Operating housing
Screw, internal
with plastic bungs
220 (120)
530
313
360
100
(50)
193 (93)
40
5
5.
49
100
(50)
218.5
(118.5)
483
Support arm connection at
bottom by rotating the enclosure
Dimensions in brackets for
CP 6681.000
498
Operating and keyboard housing
220 (120)
80
380.8
460
220 (120)
530
193 (93)
483
3
2
60
200
Dimensions in
brackets for
CP 6680.010
19.5
62.5
382.3
1
359
100 (50)
460
194.5 (94.5)
94.5
(62.5)
15°
Adapting pieces included
in the supply of CP 6680.010
1 = Support arm connection at top
only with CP 6680.000, CP 6680.100
2 = Support arm connection at bottom
only with CP 6680.010 (see 3 ), CP 6680.110
498
Top view
Depth 120 mm
Keyboard housing
Top view
Depth 220 mm
192
467
60
300
Packs of
1
Model No. CP
Width mm
Height mm
Depth mm
For installation plate
WxH
Installation depth
Support arm connection
Operating housing
Keyboard housing
Operating housing
Keyboard housing
R4
40
R 40
5
200
367
63
50
5°
153
530
62.5
80
152
35.9
174.5
17.5
Premium Panel
with keyboard housing
6680.000
6680.010
6680.100
6680.110
530
460
200
120
220
63/80
Operating housing
Keyboard housing
Operating housing
482.6 mm (19˝) x 354.8 mm (8 U)
482.6 mm (19˝) x 177 mm (4 U)
115
215
front 58
rear 63
Keyboard housing
top
bottom
top
without keyboard housing
6681.000
6681.100
360
–
120
220
482.6 mm (19˝) x 310 mm (7 U)
–
115
215
–
bottom
top, bottom by turning
the housing
Accessories
Rear panel holder CP
2
6682.000
To order Premium Panel in 1.4404 (AISI 316L) please change the last four digits of Model No. CP 665X.XXX. Delivery times available on request.
30
Rittal Stainless steel brochure
Premium Panel
Easy-to-clean exterior gasket.
Cable entry into the
keyboard housing through
the duct connectors to the
operating housing.
Material:
Stainless steel 1.4301
Surface finish:
Brushed, grain 240
Protection category:
IP 69K to DIN 40 050-9/5.93
A new layout, a new concept
for seal and fastener
● Safe for high-pressure
cleaning (protection
category IP 69K to
DIN 40 050-9/5.93).
Seal is between two surfaces and is compressed
optimally through screw
fastening (see detailed
drawing).
● Screw fastening for high
standards in the areas of
food and hygiene.
Internally with plastic bungs,
external hex screw head.
● Best EMC conditions.
Through the seal labyrinth,
special EMC shielding is
achieved in the housing.
● Internal rear panel holder.
With regard to hygiene, this
solution is clearly superior to
external hinges.
● Two duct connectors
between the enclosures.
Rittal service:
The rear panel holder holds
the rear panel in position when
opened.
Model No. CP 6682.000
Rittal Stainless steel brochure
Accessories:
Other dimensions or other
housings with this sealing
design available on request.
Cutouts and holes to your
specifications.
see page 70/71
or refer to index.
Support arm system
See page 36.
Stainless steel keyboard
482.6 mm (19˝)/4 U
IP 67, for use in the food
industry,
see Innovations 2003, page 50.
31
B3
160
B1
B4
150
4.5
M 6 x 15
2
2
H4
H5
H3
1
H2
H1
1
19
19
B2
B5
145
1 = Does not apply to
CP 6670.000
2 = Does not apply to
CP 6672.000
72.5
1 = Does not apply to
CP 6670.000
2 = Does not apply to
CP 6672.000
X
40
X = Mounting cutout
5.
49
5
Supply includes:
Enclosure with cutout and reinforcement for
support arm system,
front panel or rear panel with seal and
assembly parts.
Two configuration options:
● Front panel screw-fastened at the front
● Front panel as rear panel, additional
handle strips made from food-safe
plastic similar to RAL 5002 (ultramarine
blue) available on request
Width (B1) in mm
Height (H1) in mm
Depth in mm
Model No. CP
B2 = Clearance in width
B3*= Width of front panel
B4 = Hole pitch
B5 = Hole pitch
H2 = Clearance in height
H3*= Height of front panel
H4 = Hole pitch
H5 = Hole pitch
Weight (kg)
Accessories
Mounting plate KL
Packs of
320
240
1
6670.000
275
313
288
180
195
233
208
–
5
1
1563.700
Support rails TS 35/7.5 SZ
10
400
320
Page
160
6672.000
355
393
368
220
275
313
288
180
8
27
Cat. 30
983
Cat. 30
Mounting plate
4
4532.000
978
Cat. 30
Mounting bracket
4
4597.000
978
To order Command Panels in 1.4404 (AISI 316L), please change the last three digits of the Model No. to .500. Delivery times available on request.
*Other sizes and front panel finishes available on request.
32
1567.700
2316.000
Rittal Stainless steel brochure
Command Panels
Multi-folded enclosure opening
with captive nuts to secure the
front panel.
Recessed front panel installation
provides a high level of mechanical protection for mounted equipment.
Accessories:
see page 70/71
or refer to index.
Material:
Stainless steel 1.4301
Enclosure: 1.25 mm
Front panel: 2.0 mm
Surface finish:
Brushed, grain 240
Protection category:
IP 65 to EN 60 529/10.91
Handle strips
Made of plastic, available on
request.
Rittal Stainless steel brochure
Enclosure attachment
with pre-fitted screw for location purposes.
See page 37.
Connector gland
for 2 cables up to 8 mm diameter.
Model No. SZ 2400.300.
See Innovations 2002, page 35.
33
150
105
40
H2
H1
H4
H3
2
30
H5
75 (A)
1
B5
168
1 = Welded stud M6 x 15
2 = Welded stud M8 x 30
B1
5.
Ø
40
52.5
B4
118
30
100
105
Ø 49
5
A
15
B7
B6
B3
B2
Supply includes:
All-round sealed enclosure,
with cutout and reinforcement
for support arm system,
fastener with guide plate.
Door with sealing frame and side handle
strips.
Support arm
connection
top
bottom
Width (B1) in mm
Packs of
Height (H1) in mm
Depth (T1) in mm
Model No. CP
1
B2 = Enclosure width with handle strips
B3 = Clearance opening, front
B4 = Spacing of mounting plate attachment
B5 = Max. front cutout, width
B6 = Hinged width for depth 100 mm
B7 = Hinged width for depth 138 mm
H2 = Enclosure height with handle strips
H3 = Spacing of mounting plate attachment
H4 = Max. front cutout, height
H5 = Distance from base – mounting plate attachment
Weight (kg)
Accessories
Matching mounting plate from AE
ID No.
Support rails* SZ
Model No. SZ
10
Door hinge
left
right
300
300
150
6535.010
340
260
215
225
220
212
310
250
255
25
6.3
400
300
150
6536.010
440
360
295
325
320
317
310
250
255
25
7.5
400
400
150
6538.010
440
360
295
325
320
317
410
330
355
35
8.8
600
400
150
6539.010
640
560
510
525
520
519
410
330
355
35
12.1
1033.600
1030.600
1380.600
1039.600
271926
274131
271548
271351
2316.000
2317.000
2317.000
2319.000
Page
Cat. 30
68
Cat. 30
983
Lock systems
Standard double-bit lock insert may be exchanged for 41 mm lock inserts, plastic handle and T handle, version C
see Cat. 30, page 940 – 942.
To order operating housings in 1.4404 (AISI 316L), please change the last three digits of the Model No. to .510. Delivery times available on request.
* = Only with vertical attachment of punched rail 23 x 23 mm see Cat. 30, page 976.
34
Rittal Stainless steel brochure
Operating housing
PE conductor connection point in
the door.
Cam with guide piece.
Support arm cutout with additional reinforcement plate.
Accessories:
see page 70/71
or refer to index.
Material:
Enclosure and door:
Stainless steel 1.4301
Handle strips: Plastic approved
for use with foodstuffs,
RAL 5002 (ultramarine blue)
Surface finish:
Brushed, grain 240
Protection category:
IP 66 to EN 60 529/10.91
Modifications:
● Separate keyboard housing
● Other sizes
● Modified support arm
cutout or door hinge
● Holes and cutouts for
switches and operator
panels
on request.
Rittal Stainless steel brochure
Semi-cylinder lock
For retro-fitting to stainless
steel enclosures with cam lock.
See page 24.
Cable fastening
screw-fastened.
See Cat. 30, page 1010.
The alternative. AE stainless
steel, rear door, support arm
connection and handle strips
available on request.
See page 18.
35
Support arm system
Support arm system
Load specifications
In conjunction with special command
panels, terminal boxes 120 mm deep and
compact enclosures AE made from stainless steel, the support arm system is particularly well-suited to situations where
corrosion protection and hygiene are paramount.
A tilting adaptor and housing coupling may
optionally be mounted at the top or bottom
of the enclosure. They are not suitable for
use as the base point of a system. For
such purposes, we recommend wall and
base mountings or, for larger heights, an
additional pillar made from steel tubing or
stainless steel, available on request.
Jib length in mm
Permissible static
(dimension B)
load* (N)
500
800
1000
400
1500
250
* For a maximum dimension A and C
of 800 mm
Support section
By special request, other sizes feasible
per specification.
Seven standard items are available off the
shelf, which can either be tailored to your
individual requirements by sawing to
length.
Material:
Stainless steel 1.4301
Surface finish:
Brushed, grain 240
Material:
Stainless steel 1.4305
Protection category:
IP 69K to DIN 40 050-9/5.93
(Resistant to high-pressure cleaning)
Order example:
U-bend = CP 6660.200
Dimension A = 300 mm
Dimension B = 800 mm
Dimension C = 240 mm
The minimum dimensions must be adhered
to, because of the bending radius and
immersion depth of the housing coupling or
wall/base mounting.
Dimensions:
External diameter: 48 mm
Wall thickness: 3.6 mm
Weight:
4.3 kg/m
Straight
Amin. = 100 mm,
Amax.= 2000 mm
A mm
500
1000
2000
per specification
A=
A
L-bend
Amin. = Bmin. = 240 mm,
Bmax. =1500 mm
Model No. CP
6660.050
6660.010
6660.020
6660.000*
A mm
B mm
Model No. CP
240
500
6660.110
500
1000
6660.120
per
per
specification specification
6660.100*
A=
B=
A
B
R130
U-bend
Amin. = Cmin. = 240 mm,
Bmin. = 410 mm,
Bmax.=1500 mm
C
A
B
R130
A mm
B mm
C mm
240
240
per
specification
A=
800
500
per
specification
B=
800
500
per
specification
C=
Model No.
CP
6660.210
6660.220
6660.200*
R130
* Extended delivery times
36
Rittal Stainless steel brochure
Support arm system
Tilting adaptor, 10°
For mounting between operating housing
and
● Enclosure attachment CP 6664.500
or
● Housing coupling CP 6664.000
Material:
Stainless steel 1.4305
84
40
Weight
0.7 kg
Model No. CP
6664.100
Supply includes:
1 set =
1 tilting adaptor,
4 assembly screws,
1 seal.
Mounting cutout
40
30
5.
5
49
10°
49
15
Enclosure attachment
Weight
1.0 kg
For rigid fastening of the enclosure to the
support section.
Material:
Stainless steel 1.4305
Note:
For assembly of a modular, stainless steel
pedestal 2 packs are required.
Ø 48.3
Model No. CP
6664.500
Accessories:
Enclosure reinforcement,
see page 41.
Mounting cutout
for pedestal, bottom
Mounting cutout,
for enclosure
Ø 5.5
52
31
Ø9
Ø 40
Ø 49
Ø 40
Ø 84
Ø 62
Housing coupling
Weight
1.1 kg
For mounting on the vertical part of the
support arm system, rotation range approximately 350°, lockable with knurled screw.
Material:
Stainless steel 1.4305
Supply includes:
1 set =
1 housing coupling,
2 assembly screws for support sections,
4 assembly screws for enclosure,
1 seal for support sections,
1 seal for enclosure.
Model No. CP
6664.000
Accessories:
Enclosure reinforcement,
see page 41.
Ø 48.3
40
Mounting cutout
Enclosure
5.
49
23
53
30
5
Ø 40
Ø 84
Rittal Stainless steel brochure
37
Support arm system
Wall / base mounting, rigid
For attachment of the support arm system
to vertical or horizontal surfaces.
Material:
Stainless steel 1.4305
Weight
1.6 kg
Model No. CP
6663.000
Accessories:
Supply includes:
1 set =
1 wall/base mounting,
2 assembly screws for support section,
3 adjusting screws,
1 seal for support sections,
1 seal for wall/base.
110
Wall consoles,
see page 40.
Mounting cutout
42
65
Ø 48.3
9 / M8
90
3
42 – 50
20
38
Rittal Stainless steel brochure
Support arm system
Swivel base mount
Attachment
M8 thread
at rear
Front hole
Ø 9 mm
For external mounting on
● Horizontal surfaces
● Wall consoles (only with CP 6663.500)
Rotation range approximately 350°, may
be limited in 60° increments using the supplied plate and clamped with a knurled
screw.
Weight Model No. CP
1.9 kg
6663.500
2.1 kg
6663.400
Accessories:
Material:
Stainless steel 1.4305
Wall brackets for base mounting
CP 6663.500,
see page 40.
Supply includes:
1 set =
1 base mount,
2 assembly screws for support section,
1 seal for support section,
1 seal for surface or wall bracket.
Ø 48.3
48
Mounting cutout
9
40
.5
111
95
M8
Ø 40
M8
Ø 110
Ø 48.3
12
48
Mounting cutout
40
12
111
M
8
9
Ø 40
Ø 149
Rittal Stainless steel brochure
39
Support arm system
Wall bracket
Attachment
M8 thread
at rear
Front hole
Ø 9 mm
With holes for mounting
● Swivel base mount CP 6663.500 with
4 screws
● Wall/base mounting, rigid, CP 6663.000
with 4 screws and nuts, including seal
to the vertical surface and an additional
seal for replacement when mounting
CP 6663.000.
Weight
Model No. CP
1.5 kg
6665.000
1.8 kg
6665.500
Material:
Stainless steel 1.4301
Surface finish:
Brushed, grain 240
Rear fastening
Mounting cutout
129
71
1
90
100
105
116
70
116
144
71
52
M8
M8
9
70
2
Example: CP 6665.000 + CP 6663.000
1 = Hole for CP 6663.000
2 = Hole for CP 6663.500
Mounting cutout
Front fastening
71
129
140
M8
100
105
160
70
116
71
144
52
1
70
Example: CP 6665.500 + CP 6663.500
2
7.5
1 = Hole for CP 6663.000
2 = Hole for CP 6663.500
40
Rittal Stainless steel brochure
Pedestal system
Pedestal, modular, small
A
B
For configuring compact operator stations.
Model No.
Page
CP
1104*
6143.310
C
41
30°
108
B
135
400
D
10
37
15°
6664.500
4 x M8
* with support section length of
1000 mm
37
6143.300
41
250
400
Enclosure reinforcement
Packs of
1
Ø6
Ø9
Material:
Stainless steel 1.4301
260
295
Surface finish:
Brushed
Supply includes:
Including assembly parts for the enclosure
and support section plus 2 seals.
Model No. CP
6143.310
9
110
For use with
● enclosure attachment CP 6664.500
● housing coupling CP 6664.000
145
For exterior or interior reinforcement of
enclosures of the appropriate size. Smaller
enclosures may also be installed directly
without a flange.
Ø 62
6664.500
Ø 32.5
Ø 49
36
36
36
Ø 40
6660.050
6660.010
6660.020
400
Can be assembled
from the following
modules:
A Enclosure
reinforcement
B Enclosure
attachment top
C Support section,
straight (can be
shorted by cutting off
individual lengths)
500 mm
1000 mm
2000 mm
B Enclosure
attachment bottom
D Pedestal base plate,
small
Accessories:
Enclosure attachment CP 6664.500,
see page 37.
Housing coupling CP 6664.000,
see page 37.
Pedestal base plate, small
With reinforcement bracket for assembling
a stainless steel support section via an
enclosure attachment.
● With one hole at the rear for commercially available cable conduit gland M20.
● With two holes at the top (incl. sealing
bungs) for lower base attachment cross
member.
● Prepared on the inside for a cable clamp
DK 7077.000 or DK 7078.000 for strain
relief.
Packs of
1
Model No. CP
6143.300
Accessories:
DK 7077.000 or DK 7078.000 cable clamp
see Cat. 30, page 981.
Material:
Stainless steel 1.4301
Surface finish:
Brushed
Supply includes:
Assembly parts for enclosure attachment
plus seal.
Note:
Commercially available screws up to M8
may be used for floor mounting.
Rittal Stainless steel brochure
41
AP 2685.600 / AP 2686.600
AP 2683.600 / AP 2684.600
B2
B2
B3
B3
480
498
447
20 °
1.5
B4
50
1.5
270
790
33
B5
B4
70
50
B7
B6
140
72
B5
50
1.5
47 (87) (127)
358 – 368
47
630
557
675
960
60
1
370
B1
1.5
400
B1
1 = No hinge for AP 2685.600
78.5
78.5
11
51
12.5
60
11
52.5
33.5
73.5
25
40
375
2
458
498
M6 x12
37
780
83
B8
11
12.5
40
B2
2 = No hinge for AP 2683.600 / AP 2684.600
52.5
23.5
F2
27.5
F1
Supply includes:
Enclosure, closed back and sides,
door or double door at the front, with rod
type lock console lid with lid stay and
stainless steel cam lock internally latched,
two-part gland plate,
zinc-plated mounting plate.
Width (B1) in mm
Packs of
Height in mm
Depth in mm
Model No. AP
1
B2 = Width
B3 = Clearance width, top
B4 = Clearance width, front
B5 = Clearance width, bottom
B6 = Width of door, left
B7 = Width of door, right
B8 = Section length of holes
F1 = Mounting plate width
F2 = Distance between mounting holes
Doors
Weight (kg)
Accessories
Base/plinth SO
Height 100 mm
1
Height 200 mm
1
600
960
400/480
2683.600
597
544
524
500
–
–
500
530
475
1
52.0
800
960
400/480
2684.600
797
744
724
700
–
–
700
730
675
1
65.2
1000
960
400/480
2685.600
997
944
924
900
495
497
900
930
875
2
79.5
1200
960
400/480
2686.600
1197
1144
1124
1100
595
597
1100
1130
1075
2
90.3
Page
2865.000
2875.000
2869.000
2878.000
2867.000
2885.000
2870.000
2886.000
63
63
Lock systems
Standard double-bit lock insert of locking rod may be exchanged for 27 mm lock inserts, type A,
see Cat. 30, page 942 and lock systems Ergoform-S, see Cat. 30, page 939.
To order one-piece consoles in 1.4404 (AISI 316L), please change the last three digits of the Model No. to .500. Delivery times available on request.
42
Rittal Stainless steel brochure
One-piece consoles AP
The lid support is secured to prevent accidental closure.
The mounting plate is heightadjustable by 2 x 40 mm, e.g. for
deep equipment installed in the
lid or cable entry from the rear.
Accessories:
see page 63/64
and page 70/71
or refer to index.
Material:
Stainless steel 1.4301
Enclosure: 1.5 mm
Door or double door and
console lid: 2.0 mm
Mounting plate:
Sheet steel 3.0 mm
Surface finish:
Enclosure, door and console
lid: Brushed, grain 120
Mounting plate: Zinc-plated
Protection category:
IP 55 to EN 60 529/10.91
Complies with NEMA 12
Levelling feet
for base/plinth to compensate
for floor irregularities.
See page 64.
Rittal Stainless steel brochure
P 67 mouse and mouse pad
See Cat. 30, page 1004.
Wall bracket, stainless steel
mounted on the rear panel for
additional command panel.
See page 40.
43
AP 2689.600 front door, tall
23
42.5
42.5
365
i. L. 515
23
42
11°
1196
44.3
44.3
i. L. = Clearance width
➀=
835
1
1
➀=
from 200 to 400 mm adjustable
on a 25 mm pitch pattern
25.5
502
25.5
502
763
i. L. 512
635
604
805
1300
1273.5
i. L. 512
i. L. 1212
173.5
28
i. L. 1212
1300
1273.5
i. L. 512
23
24.5
11°
i. L. 512
17
440
440
365
i. L. 515
499
417.5
592
48
600
592
73
417.5
600
Mounting plate
24.5
AP 2688.600 front door, short
from 200 to 400 mm adjustable
on a 25 mm pitch pattern
Order examples
AP 2688.600
Front door, short
AP 2690.000
Desk section
Supply includes:
Enclosure closed top and sides,
rear door,
three-part gland plates,
mounting plate.
AP 2688.600
Front door, short
AP 2690.000
Desk section
AP 2688.600
Front door, short
AP 2691.000
Keyboard drawer
AP 2688.600
Three-part front:
Top door inclined at 11°, r/h hinge.
Space for
– desk section AP 2690.000
– keyboard drawer AP 2691.000.
Bottom door, r/h hinge.
Packs of
Width in mm
Height in mm
Depth in mm
Model No. AP
Weight (kg)
Essential accessories
Desk section AP
or
Keyboard drawer AP
Accessories for external mounting
Base/plinth SO
Height 100 mm
Height 200 mm
Base/plinth trims, modular SO
1
AP 2689.600
Front door, tall
AP 2689.600
Two-part front:
Top door inclined at 11°, r/h hinge.
Bottom door, r/h hinge.
Universal console
with short front door
600
1300
500
2688.600
83.3
Page
with tall front door
600
1300
500
2689.600
84.5
1
2690.000
–
49
1
2691.000
–
49
1
1
4
2868.000
2876.000
2908.000
2868.000
2876.000
2908.000
63
63
64
Lock systems
Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A – see Cat. 30, page 942,
and Ergoform-S lock system – see Cat. 30, page 939.
To order universal consoles in 1.4404 (AISI 316L), please change the last three digits of the Model No. to .500. Delivery times available on request.
44
Rittal Stainless steel brochure
Universal consoles AP
All-round punchings on a 25 mm
pitch pattern for fast, versatile
installation.
Mounting plate with slide block
and runner for convenient installation and depth-variable attachment.
Accessories:
see page 48/49
and page 70/71
or refer to index.
Material:
Stainless steel 1.4301
Enclosure: 1.5 mm
Door: 2.0 mm
Mounting plate:
Sheet steel 3.0 mm, zinc-plated
Surface finish:
Brushed, grain 120
Protection category:
IP 56 to EN 60 529/10.91
Complies with NEMA12
Connector gland
for 3 cables up to a diameter of
6 mm.
Model No. SZ 2400.500.
See Innovations 2002, p. 35.
Rittal Stainless steel brochure
Rail for EMC screening plate
and strain relief
See Innovations 2002,
page 74.
Mouse pad support
For desk section, mouse and
mouse pad IP 67.
See Cat. 30, page 1004/1005.
45
PC 4650.000
with keyboard drawer
PC 4650.704
with desk section
i.L. 512
i.L. 502
381
max. 547*
627
max. 505*
589
558
381
599
293
i.L. 502
361
max. 547*
i.L. 512
max. 505*
627
293
589
816
599
i.L. 1512
1384
492
798
863
954
854
1603.5
125
53
1603.5
798
863
°
492
7
4
10
1384
125
100
i.L.15
47.5
i.L. 542
* adjustable in the 25 mm pitch
i. L. = Clearance width
On request:
PC enclosure system
with mounting
compartment, large
and keyboard drawer
PC enclosure
system
with keyboard
drawer
Supply includes:
Enclosure with closed sides, top and
bottom
Rear door with locking rod and double-bit
insert
Three-part gland plates
Component shelf for monitor, see description opposite
Bottom: Door, r/h hinge, with Ergoform-S
lock system and double-bit insert.
PC enclosure system
with desk section
PC 4650.000
Keyboard drawer
● Lock insert,
lock no. 3524 E
● Front can be folded down for hand rest
● Mouse pad support (also suitable for
IP 67 mouse), usable optionally l/h or
r/h side
● Cable support, hinged
Width in mm
Packs of
Height in mm
Depth in mm
Model No. PC
1
Weight (kg)
Accessories for external mounting
Base/plinth SO
Height 100 mm
1
Height 200 mm
1
Levelling feet, 100 mm high SO
1 set
Base/plinth trims, modular SO
4
Accessories for internal mounting
PC 4650.704
Desk section
● Blanking panel top and bottom
● Styling strip made of food-safe plastic
600
1600
620
4650.000
115.0
600
1600
620/820
4650.704
123.0
Page
2855.000
2877.000
2859.000
2913.000
2855.000
2877.000
2859.000
2913.000
63
63
64
64
Mounting angles for 482.6 mm (19˝)
4
4632.000
4632.000
Adaptor pieces, 482.6 mm (19˝)
8
4547.000
4547.000
Disk box SZ
1
2446.000
2446.000
Cat. 30,
1026
Cat. 30,
1026
Cat. 30,
951
Lock systems
Standard double-bit lock insert may be exchanged for 27 mm lock inserts, Design A, see Cat. 30, page 942.
Rear door prepared for installation of Ergoform-S lock system, see Cat. 30, page 939.
Order enclosures in 1.4404 (AISI 316L) with extension no. .50X. Delivery times available on request.
46
Rittal Stainless steel brochure
PC enclosure systems
Release mechanism in the keyboard drawer area for monitor
door.
Mouse pad support pulled out
from left or right side.
Cable support, hinged on the
keyboard extension.
Accessories:
see page 48/49
and page 70/71
or refer to index.
Material:
Stainless steel 1.4301
Enclosure:
10-fold profiled, 1.8 mm
Rear door: 2.0 mm
Gland plates: 1.5 mm
Monitor field with single-pane
safety glass for 19˝ screen
diagonal.
Surface finish:
Brushed, grain 240
Protection category:
IP 55 to EN 60 529/10.91
Complies with NEMA 12
Component shelves
installable in the height on a
25 mm pitch pattern.
See page 49.
Rittal Stainless steel brochure
PC mobile workstation
Plenty of space for tower PCs,
printers, and paper.
See page 48.
Connector grommet
dividable for keyboard, mouse,
or scanner cables.
See Innovations 2002,
page 35.
47
Accessories
Human / machine interface
Mobile PC workstation
Packs of
1
for Tower PC, printer, USB, Server, etc.
Model No. PC
4641.000
Option of installing in 600 mm wide
enclosures, 600 mm deep.
Load capacity:
75 kg
Also required:
Punched sections with mounting flanges,
punched sections without mounting
flanges,
see table.
Material:
Sheet steel
Colour:
RAL 7035
Supply includes:
Mobile workstation consisting of:
1 support frame,
2 shelves, top/bottom,
1 set of telescopic slides,
1 handle,
1 cable support, hinged,
mounting accessories.
For enclosure depth
mm
Accessories:
Fastening bolts DK 7115.000,
see Cat. 30, page 993.
For installation in
TS
ES, PC
2 punched sections with
2 punched sections without
mounting flanges,
mounting flanges*,
see Cat. 30, page 974
see Cat. 30, page 977
TS 8612.060
PS 4376.000
600
* plus
4 support brackets PS 4183.000, see Cat. 30, page 979,
8 threaded blocks M6 PS 4162.000, see Cat. 30, page 982,
8 screws M6 SZ 2504.500, see Cat. 30, page 981.
451
55
614
524
550
45
25
391
19
45
25
220
471
471
Shelf
for PC workstation
To accommodate additional equipment
such as modems, power packs etc. or
simply as a paper tray.
The shelf may be mounted to the workstation with height adjustment on a 25 mm
pitch pattern.
Material:
Sheet steel
Colour:
RAL 7035
48
Packs of
1
Model No. PC
4642.000
Supply includes:
Shelf including assembly parts.
Accessories:
Fastening bolts DK 7115.000,
see Cat. 30, page 993.
Rittal Stainless steel brochure
Accessories
Human / machine interface
Keyboard drawer
For a maximum keyboard width of 500 mm.
Drawer with mouse pad at the front.
Includes assembly material for attaching to
universal console AP 2688.600.
Material:
Stainless steel 1.4301
Keyboard drawer
Model No. AP
2691.000
Note:
Order keyboard drawer in 1.4404
(AISI 316L), with extension no. .500.
Delivery times available on request.
Surface finish:
Brushed
477
113
70
170
195
600
467
358
508
36
Desk section
Solid sides and front,
cover plates for top and bottom. May be
attached with either the inclined or straight
edge on top, by rotating through 180°.
Includes assembly material for attaching to
universal console AP 2688.600.
Material:
Stainless steel 1.4301
Desk section
Model No. AP
2690.000
Surface finish:
Brushed
Note:
Order desk section in 1.4404 (AISI 316L),
with extension no. .500.
Delivery times available on request.
592
i. L. 432
20
78.5°
58
195
122
i. L. 27
4.5
36.5
i. L. 271.5
i. L. 532
Component shelf,
static installation
To match the enclosure depth, for direct
mounting in the vertical system punchings.
Simply locate into 4 prefitted screws and
secure.
For ES, PC
For TS
Load capacity:
50 kg
Material:
Sheet steel 1.5 mm
Component shelf, pull-out
For direct attachment on the enclosure
frame. Additional punched sections are not
required.
Material:
Sheet steel
Colour:
RAL 7015 (slate grey)
Load capacity:
40 kg
Rittal Stainless steel brochure
350
i.L. = Clearance width
For ES, PC, colour RAL 7035
For enclosure depth*
620 mm
Model No. PC
4619.660
For TS, colour RAL 7015
For enclosure depth*
Model No. PC
600 mm
8800.900
* Enclosures without mounting plate.
For depth mm
600
Model No. IW
6902.9601)
1) May also be mounted in 800 mm deep enclosures based on TS (without mounting plate)
(rear attachment extendible).
Supply includes:
Component shelf with 2 telescopic slides
(supplied loose).
49
Large enclosures
Rittal has shaped and revolutionised the range of benefits
Standard modules, rather than customisation, offer infinite
afforded by large enclosures with constant innovations.
solution diversity, coupled with astonishing time and cost
Whether used as a free-standing or a bayed enclosure,
savings.
these systems offer the maximum in usable space. All this,
plus excellent solution diversity with system accessories.
The integration e.g. of climate control components and
system preparations for electronics make TS and ES enclosures ideally suited to demanding IE and IT applications.
Here too, system integration is based on the modular
approach.
TS 8 baying systems
● Frame structure made from
solid sections with 25 mm
system punchings
● Lockable door with four-point
lock and four hinges (130°),
adjacent door with separate
latching top and bottom, four
hinges (130°)
● Potential equalisation via the
assembly components with:
– Roof plate
– Rear panel with 8/10-fold
screw fastening
– Three-piece gland plates
– Depth-adjustable
mounting plate
TS baying system (Protection category IP 55)
50
W mm
H mm
D mm
Model No. TS
800
1800
400
8454.600
1200
1800
400
8456.600
600
1800
500
8457.600
800
1800
500
8455.600
1200
1800
500
8453.600
600
2000
600
8452.600
800
2000
600
8450.600
1200
2000
600
8451.600
Page
54/55
Rittal Stainless steel brochure
Free-standing enclosures ES 5000
● Enclosure sealed at the
sides and top, with 25 mm
system punchings
● Lockable door with threepoint lock and three hinges
(130°), adjacent door
latched via lockable door,
three hinges (130°)
● Rear panel with 6/8-fold
screw fastening
● Three-piece gland plates
● Depth-adjustable mounting
plate
ES free-standing enclosures (Protection category IP 56)
W mm
H mm
D mm
Model No. ES
600
1600
400
5450.600
600
1800
500
5451.600
800
1800
500
5452.600
800
2000
600
5453.600
1000
1800
400
5454.600
1200
2000
Page
58/59
(Protection category IP 55)
500
5455.600
The enclosure Model Numbers listed here apply to the variant in 1.4301 (AISI 304).
For the variant in 1.4404 (AISI 316L), the Model Number can be found on the
respective product page.
TS baying systems
ES free-standing enclosures
UL
●
●
CSA
●
●
TÜV
●
●
Germanischer Lloyd
●
●
Norske Veritas
–
●
Russian Maritime Register
of Shipping
●
●
Lloyds Register of Shipping
●
●
Bureau Veritas
●
●
VDE
●
●
Approvals
Rittal Stainless steel brochure
51
TS 8 – the Rittal Top enclosure system now available with more
variation options with standardised components. This variability
is the key to perfect, individual solutions and is outstanding value
for money. This is why the TS 8 in stainless steel is technically and
economically the answer for all industries that demand corrosion
protection and hygiene.
The sum of these useful
ideas is ri-volutionary.
● The core of the TS 8 is the vertical section. It is the focal point of a new dimension of usability.
● Considerably more interior space,
more effectively used with its two-level
concept.
● More options with fewer parts with
symmetry on all sides.
● Open on all sides: each of the four TS
vertical sections can house the hinges
for a door.
● Enclosures can be bayed to the left,
right, front, back, around corners, and
when needed top and bottom.
More space and infinite possibilities with
the two-level concept!
Outer level: up to 15% more space.
Inner level: more options with the classic
enclosure mounting surface.
Ingenious: Installation is feasible on both
levels simultaneously. The space gained
offers a lot of room for creative ideas, e.g.
separate cable entry or new options for
climate control.
The TS 8 savings concept
● Save time through simplification in
installation.
● When installing, save through more
options with fewer parts.
● Automatically save through standard,
integral features.
● Save through versatile components.
● Save through symmetry.
Symmetry makes many things easier,
from planning to installing equipment.
● Save through security, because risk
minimisation is an important factor in
cost-effectiveness.
52
Rittal Stainless steel brochure
TS 8 . . . infinite possibilities
Now in stainless steel
Each detail, a clever solution!
The integral channel above the seal on the
horizontal frame section prevents liquid
from collecting on the seals and penetrating the door or side panel when opened.
Between bayed enclosures, the cover provides additional protection.
Perfect locking!
Optimum closure of the door is achieved
via four locking points. The self-locking
mechanics of the comfort handles are protected against accidental opening, such
as, from vibration.
The adjacent door of double-door enclosures is secured through additional bolts
on top and at bottom with interconnecting
rods and handle from the middle outward.
Accidental opening of a heavily equipped
adjacent door, such as with a cooling unit,
is prevented. The lock system of the primary door is identical with single-door
enclosures.
Cable entry: fast and sealed!
For cables up to 47 mm diameter, the cable
entry plates in conjunction with the cable
entry grommets offer an ingeniously simple
and especially well sealed cable entry.
A model no. for the
base/plinth components
front and back.
A model no. for the
base/plinth trim pieces
at the side.
A complete base/plinth.
The modular base/plinth design
with added-value!
Fewer parts, more options, lower costs!
The modular base/plinth design simply
offers more: Cable entry variants for individual and bayed enclosures, cable clamping and routing as required.
Unlimited possibilities
Rittal offers a unique “Modular System” for
accessories. Mechanical installation as well
as equipment with many useful components is especially cost-effective and can
be implemented rapidly.
Rittal Stainless steel brochure
53
1197
405/505/605
512/712
1112
312/412/512
1630/1830
1630/1830
1630/1880
1712/1912
1805/2005
1805/2005
597/797
455
455/655
455
499/699/1099
1696/1896
Mounting
plate
Supply includes
Material
Stainless steel 1.4301
Surface finish
Enclosure frame
1.5 mm
Bare
Door(s)
2.0 mm
Roof
1.5 mm
Detail drawing
see page 56/57.
Exterior brushed,
grain 240
Rear panel
1.5 mm
Mounting plate
3.0 mm (sheet steel)
Zinc-plated
Gland plate,
1.5 mm
Bare
three-part
2 depth stiffening supports (PS 4696.000, see Cat. 30, page 975)
mounted in enclosure depth (only for 600 mm).
Protection category IP 55 to EN 60 529/10.91, complies with NEMA 12.
Width in mm
Packs of
Height in mm
Depth in mm
1
Model No. TS
Doors
800
1200
600
800
1200
600
800
1200
1800
1800
1800
1800
1800
2000
2000
2000
400
400
500
500
500
600
600
600
8454.600
8456.600
8457.600
8455.600
8453.600
8452.600
8450.600
8451.600
Page
1
2
1
1
2
1
1
2
112.9
170.4
92.5
116.3
174.9
104.4
129.7
194.7
2
8700.840
8700.840
8700.850
8700.850
8700.850
8700.060
8700.060
8700.060
66
Height 100 mm
1 set
8701.800
8701.200
8701.600
8701.800
8701.200
8701.600
8701.800
8701.200
62
Height 200 mm
1 set
8702.800
8702.200
8702.600
8702.800
8702.200
8702.600
8702.800
8702.200
62
Height 100 mm
1 set
8701.040
8701.040
8701.050
8701.050
8701.050
8701.060
8701.060
8701.060
62
Height 200 mm
1 set
8702.040
8702.040
8702.050
8702.050
8702.050
8702.060
8702.060
8702.060
62
4
2907.000
2907.000
2908.000
2908.000
2908.000
2913.000
2913.000
2913.000
64
Divider panel
1
8609.840
8609.840
8609.850
8609.850
8609.850
8609.060
8609.060
8609.060 Cat. 30, p. 906
Divider panel for module plates
1
–
–
8609.100
8609.100
8609.100
8609.130
8609.130
8609.130 Cat. 30, p. 907
Cable clamp rails
2
4192.000
4196.000
4191.000
4192.000
4196.000
4191.000
4192.000
4196.000 Cat. 30, p. 898
Cable entry plates, TS
2
8700.800
8700.120*
8700.600
8700.800
8700.120*
8700.600
8700.800
8700.120*
System support rails
2
4362.000
4363.000
4361.000
4362.000
4363.000
4361.000
4362.000
4363.000 Cat. 30, p. 899
Support strips for door
20
4598.000
4596.000
4596.000
4598.000
4596.000
4596.000
4598.000
4596.000 Cat. 30, p. 950
Wiring plan pocket, sheet steel
1
4118.000
4116.000
4116.000
4118.000
4116.000
4116.000
4118.000
4116.000 Cat. 30, p. 952
Weight (kg)
Side panels
Base/plinth
Components
front and back
Side trim pieces
Trim panels, modular SO
Accessories
65
Lock systems
Standard double-bit lock insert may be exchanged for other inserts and comfort handle, see page 68.
* Packs of 4
To order enclosure in 1.4404 (AISI 316L) use extension no. .500. Delivery times available on request.
54
Rittal Stainless steel brochure
TS 8 baying systems
Mounting plate, zinc-plated,
C fold at sides, depth-adjustable
on the 25 mm pitch pattern.
Solid frame sections, punched
on a 25 mm pitch pattern for
universal interior installation.
Vertical stays for two mounting
levels.
For a reliable IP protection rating – adjacent door with top
and bottom bolts as well as
interconnecting rods with four
bolts. Operated with the handle.
Rittal service:
Accessories:
TS stainless steel (1.4301) with
protection category NEMA 4x
(extension no. .640) available
on request.
see page 62 – 69
and page 70/71
or refer to index.
Baying cover
Keeps the seal free from liquids
and dirt.
See page 67.
TS punched section with
mounting flange 23 x 73 mm
with punchings on all sides for
captive nuts/threaded blocks.
See Cat. 30, page 974.
Note:
Because of the material hardness, for component installation we recommend using the
Torx screw SZ 2486.300,
see page 67.
Cable gland
of polyamide or brass.
Protection category IP 68.
See Innovations 2003, page 29.
Rittal Stainless steel brochure
55
B1
B7
2.5
2.5
60
60
B1
B7
B6
B6
B6
H4
H8
H6
71
i.L. H7
H4
H8
H6
i.L. H7
i.L. B5
71
i.L. B5
i.L. B5
22
i.L. T3
i.L. B8
i.L. B8
78.5
Ø1
6
6
Base/plinth attachment: B4 x T2
B2
15
30
65
i.L. B3
46.5
B2
15
i.L. B3
M 12
46.5
30
M 12
65
18
49
F
78.5
78.5
46.5
30
65
30
49
T1
T2
i.L. B8
Ø6
61
B4
30
49
78.5
Ø1
61
i.L. T3
F
96
61
30
M6
T2
B4
30
30
65
22
M6
49
T1
Ø9
Ø 4.6
46.5
96
Ø9
61
4 x 25 (= 100)
H9
71
18
H9
4 x 25 (= 100)
71
Base/plinth attachment: B4 x T2
i.L. = Clearance width
Note:
With fitted side panels, the overall width
(B1) is increased by 9 mm.
Between bayed enclosures, allow 3 mm for
the seal.
56
Rittal Stainless steel brochure
Baying systems TS 8
Dimensions in detail
Profile cross sections
35
vertical
64.5
6.5
F
17
25
25
48
73
4.5
23
24.5
23
30
55
46
3.5
i.L. T3
12.5
T7
35
42
T6
12.5
24.5
4
42.5
2
G
H5
i.L. (B3)
G
i.L. H3
H1
H2
i.L. (T3)
42.5
17
horizontal
i.L. (H3)
i.L. (B3/T3)
32.5
i.L. = Clearance width
Enclosures
Widths
SingleTwoB1 B2 B3 B4 B5
door
door
8454.600
797 792 712 675 655
8456.600 1197 1192 1112 1075 455
8457.600
597 592 512 475 455
8455.600
797 792 712 675 655
8453.600 1197 1192 1112 1075 455
8452.600
597 592 512 475 455
8450.600
797 792 712 675 655
8451.600 1197 1192 1112 1075 455
Heights
B6 B7 B8 H1
H2
H3
H4
H5
Depths
H6
H7
H8
H9
T1 T2 T3 T4 T5
675 735 640 1805 1797 1712 1777.5 1675 1650 1630 1600 911 405
475 1135 500 1805 1797 1712 1777.5 1675 1650 1630 1600 911 405
475 535 440 1805 1797 1712 1777.5 1675 1650 1630 1600 911 505
675 735 640 1805 1797 1712 1777.5 1675 1650 1630 1600 911 505
475 1135 500 1805 1797 1712 1777.5 1675 1650 1630 1600 911 505
475 535 440 2005 1997 1912 1977.5 1875 1850 1830 1800 1011 605
675 735 640 2005 1997 1912 1977.5 1875 1850 1830 1800 1011 605
475 1135 500 2005 1997 1912 1977.5 1875 1850 1830 1800 1011 605
Enclosure
B1 = overall width
B2 = width of door
B3 = clearance between enclosure frames
B4 = section length of system holes/hole distance between base and plinth attachment
B5 = clearance between the tubular door frame
B6 = distance between axes of the rows of
tubular door frame holes
B7 = spacing between eyebolts
B8 = clearance in base aperture
H1
H2
H3
H4
H5
H6
=
=
=
=
=
=
4
10.5
overall height
height of rear panel
clearance between the enclosure frame
height of door
section length of system holes
distance between axes of the rows of
tubular door frame holes
H7 = clearance between the tubular door frame
H8 = spacing of tubular door frame fastening
bolts
H9 = distance from base to centre of lock
275
275
375
375
375
475
475
475
312
312
412
412
412
512
512
512
368
368
468
468
468
568
568
568
240
240
340
340
340
440
440
440
12.5
12.5
25
T1
12.5
T4
4.5
i.L. T5
11.5
20
62.5
44
4.5
51
25
42.5
42.5
Mount. pl.
T6
130 – 355
130 – 355
130 – 455
130 – 455
130 – 455
130 – 555
130 – 555
130 – 555
T7
F
G
335 699 1696
335 1099 1696
435 499 1696
435 699 1696
435 1099 1696
535 499 1896
535 699 1896
535 1099 1896
T1 = overall depth
T2 = section length of system holes/hole distance between base and plinth attachment
T3 = clearance between the enclosure frames
T4 = depth of base frame
T5 = clearance in base aperture
T6 = possible installation depth
(mounting plate assembly),
depth-adjustable on a 25 mm pitch pattern
T7 = centre-to-centre distance between eyebolts
Mounting plate
F = overall width
G = overall height
Rittal Stainless steel brochure
57
ES 5450.600 / ES 5451.600 /
ES 5452.600 / ES 5453.600 /
ES 5454.600
ES 5455.600
402/502/602
512/712/912
1112
302/402/502
455/655/855
455
1830
1830
1430/1630/1830
2010
1512/1712/1912
1199
1610/1810/2010
599/799/999
455
499/699/899/1099
1496/1696/1896
Mounting
plate
Supply includes:
Enclosure, closed top and sides,
removable rear wall,
r/h door hinge, can be changed to
opposite side, except for ES 5455.600;
130° hinges, mounting plate,
three-part gland plates.
Width in mm
Packs of
Height in mm
Depth in mm
Model No. ES
1
Doors
Eyebolts
Weight (kg)
Accessories external mounting
Base/plinth SO Height 100 mm
1
Height 200 mm
1
Base/plinth plate, modular SO
1
Accessories internal mounting
Detailed drawings
see page 60/61.
600
1600
400
5450.600
1
2
92.5
600
1800
500
5451.600
1
2
169.6
800
1800
500
5452.600
1
2
131.8
800
2000
600
5453.600
1
2
154.0
1000
1800
400
5454.600
1
4
146.9
1200
2000
500
5455.600
2
4
205.4
Page
2865.000
2875.000
2907.000
2868.000
2876.000
2908.000
2866.000
2879.000
2908.000
2856.000
2880.000
2913.000
2867.000
2885.000
2907.000
2860.000
2887.000
2908.000
63
63
64
System support rails PS
2
4361.000
4361.000
4362.000
4362.000
4347.000
4363.000
Cable clamp rails PS
2
4191.000
4191.000
4192.000
4192.000
4336.000
4196.000
Support strips PS
20
4596.000
4596.000
4598.000
4598.000
4599.000
4596.000
Utility lectern PS
1
4638.600
4638.600
4638.800
4638.800
–
4638.600
Wiring plan pockets PS
1
4116.000
4116.000
4118.000
4118.000
4124.000
4116.000
Cat. 30
899
Cat. 30
898
Cat. 30
975
Cat. 30
951
Cat. 30
952
Lock systems
Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A – see Cat. 30, page 942
and Ergoform-S lock system – see Cat. 30, page 939
To order enclosures in 1.4404 (AISI 316L), please change the last three digits of the Model No. to .500. Delivery times available on request.
58
Rittal Stainless steel brochure
Free-standing enclosures ES 5000
Door with rectangular frame,
slotted.
Enclosure with twin rows of holes
in all 3 dimensions.
Mounting plate with slide block to
guide runner.
Rittal service:
Accessories:
ES stainless steel (1.4301) with
protection category NEMA 4x
(extension no. .640) available
on request.
see page 62 – 69
and page 70/71
or refer to index.
Signal pillars
Simple contact using bayonet
connectors.
See Cat. 30, page 1000.
Stainless steel viewing
window. Reliable protection for
installed components in stainless steel enclosures.
See page 69.
Material:
Stainless steel 1.4301
Enclosure: 1.8 mm
Door: 2.0 mm
Rear panel: 1.5 mm
Mounting plate:
Sheet steel 3.0 mm
Surface finish:
Enclosure, rear panel and
doors: Brushed, grain 240
Mounting plate: Zinc-plated
Protection category:
IP 56 to EN 60 529/10.91
(for all single-door ES),
IP 55 to EN 60 529/10.91
(for all double-door ES),
Complies with NEMA 12
Rittal Stainless steel brochure
Mounting plate
Also suitable for components
outside of the 25 mm pitch
pattern of holes.
See Cat. 30, page 978.
59
B1
B8
B7
72
H2
H8
H6
i.L. H7
H2
H8
H6
i.L. H7
3
3
B1
B8
72
i.L. B6
72
B7
B7
i.L. B6
i.L. B6
Ø9
4 x 25 = 100
H9
4 x 25 = 100
Ø9
H9
72
Ø 4.6
Ø 4.6
M6
25.5
98
25.5
98
M6
i.L. = Clearance width
63.5
50
99
i.L. B9
99
F
i.L. B9
99
B2
Cross-section
50
39
i.L. B9
99
Ø 16
i.L. B3
63.5
i.L. B3
30
50
Ø 16
62
30
25
F
B5
62
T2
50
25
63.5
62
30
T1
25
63.5
T2
T1
30
25
B5
62
8
B2
B2
Pitch pattern of holes
23.5
25
11.8
11.8
20.5
10.5
12.5
44.3
60
12.5
4.5
Rittal Stainless steel brochure
Free-standing enclosures ES 5000
Dimensions in detail
F
17
23
23
73
48
30
54.5
65
46.5
3
Mounting plate
38.5
24.5
T7
38.5
42
G
H5
T4
63.5
25
G
T5
33.5
45
25.5
24.5
2
53
i.L. H3
H1
H2
T6 – 149
20
20
T1
i.L. = Clearance width
Enclosures
Single-door
Two-door
ES 5450.600
ES 5451.600
ES 5454.600
ES 5452.600
ES 5453.600
ES 5455.600
B1
599
599
999
799
799
1199
B2
592
592
992
792
792
592
B3
512
512
912
712
712
1112
Widths
B5 B6
475 455
475 455
875 855
675 655
675 655
1075 455
Enclosure
B1 = overall width
B2 = width of door
B3 = clearance between enclosure frames
B5 = section length of system punchings/hole
distance of base and plinth attachment
B6 = clearance between the tubular door frame
sections
B7 = distance between the rows of tubular door
frame holes
B8 = spacing between eyebolts
B9 = clearance in base aperture
Rittal Stainless steel brochure
B7
475
475
875
675
675
475
B8
535
535
935
735
735
1135
B9
401
401
801
601
601
481
H1
1610
1810
1810
1810
2010
2010
H2
1575
1775
1775
1775
1975
1975
H3
1512
1712
1712
1712
1912
1912
Heights
H5 H6
1475 1450
1675 1650
1675 1650
1675 1650
1875 1850
1875 1850
H7
1430
1630
1630
1630
1830
1830
H1 = overall height
H2 = height of rear panel and door
H3 = clearance between enclosure frame
sections
H5 = section length of system punchings
H6 = distance between the rows of tubular door
frame holes
H7 = clearance between tubular door frame
sections
H8 = spacing of tubular door frame fastening
bolts
H9 = distance from base to centre of lock
H8
1400
1600
1600
1600
1800
1800
H9
798
898
898
898
998
998
T1
402
502
402
502
602
502
T2
275
375
275
375
475
375
Depths
T4 T5
349 269
449 369
349 269
449 369
549 469
449 369
T6
349
449
349
449
549
449
T7
325
425
325
425
525
425
Mount. pl.
F
G
499 1496
499 1696
899 1696
699 1696
699 1896
1099 1896
T1 = overall depth
T2 = section length of system punchings/hole
distance of base and plinth attachment
T4 = depth of base frame
T5 = clearance in base aperture
T6 = possible installation depth (mounting plate
assembly) up to 149 mm, depth-adjustable
on a 25 mm pitch pattern
T7 = centre-to-centre distance between eyebolts
Mounting plate
F = overall width
G = overall height
61
Accessories
Large enclosures
Base / plinth components
front and rear
Model No. TS
100 mm
200 mm
high
high
600
1
8701.600 8702.600
800
1
8701.800 8702.800
1200
1
8701.200 8702.200
Order base/plinth components in 1.4404
(AISI 316L), with extension no. .X05.
Delivery times available on request.
For
Packs
enclosure
of
width mm
for TS
Material:
Stainless steel 1.4301
Surface finish:
Brushed
Supply includes
1 set =
Height
100 mm
200 mm
–
2*
Accessories:
Corner pieces
Trim pieces
2
2
front/rear
Mounting accessories including 4 screws
and M12 nuts for fitting to the enclosure
* Corner piece with removable trim,
for mounting optionally on the front or
rear.
Trim panels, modular
(perforated plate),
see page 64.
Base / plinth trim, side
Model No. TS
100 mm
200 mm
high
high
400
1
8701.040 8702.040
500
1
8701.050 8702.050
600
1
8701.060 8702.060
Order base/plinth trim panels in 1.4404
(AISI 316L), with extension no. .0X5.
Delivery times available on request.
For
Packs
enclosure
of
depth mm
for TS
Installation between the base/plinth components front and rear. For 200 mm height
two 100 mm base/plinth trim pieces can be
used.
Base/plinth trim pieces (100 mm high) can
be installed rotated 90° to stabilise bayed
base/plinth components.
Material:
Stainless steel 1.4301
Accessories:
Surface finish:
Brushed
Attachment bolts for base/plinth,
see page 64.
Leveling feet, see page 64.
Supply includes:
1 set = 2 base/plinth trim panels including
material for attaching the base/plinth components.
Also required:
Base/plinth baying brackets TS 8601.100,
see Cat. 30, page 881,
for installation of base/plinth trim
components rotated by 90°.
Base/plinth 200 mm high
125
Base/plinth corner piece
62.5
32.5
18 x 14
13
13
18 x 14
12
32.5
14
14
Base/plinth trim, side
Base/plinth trim, side
B4
B4
B3
B3
B2
B2
B1
B1
Description of the hole pattern
B1/T1 = External dimensions
B2/T2 = For screw fastening in the thread of
the enclosure corner piece from
below
B3/T3 = For screw fastening via captive nut
on the enclosure floor from below
or above
All holes (B2 – B4/T2 – T4) can be used for
screw fastening on the floor.
25.5
42
Ø 9.4
59.5
T5
T4
T3
30
50
25.5
42
Ø 9.4
59.5
T2
T1
B5
30
50
T5
T4
T3
T2
T1
B5
62
59.5
59.5
62.5
Base/plinth components
front/rear
100
Base/plinth components
front/rear
61.5
100
12
Base/plinth 100 mm high
Base/plinth components front/rear
Base/plinth trim, side
Width mm
B1
B2
B3
B4
B5 Depth mm T1
T2
T3
T4
600
600 535 475 400 570
400
369 335 300 275
800
800 735 675 600 770
500
469 435 400 375
1200
1200 1135 1075 1000 1170
600
569 535 500 475
T5
250
350
450
Rittal Stainless steel brochure
Accessories
Large enclosures
Complete base / plinth
Height
100 mm 200 mm
Corner pieces
–
2*
Trim panels front/rear
2
2
Trim panels, side
2
4
Assembly parts including 4 screws and
captive nuts M12 for mounting on the
enclosure.
* Corner pieces with removable trim
panel, to be mounted optionally at the
front or rear.
Supply includes
Consisting of:
Trim panels front and rear (for height
200 mm with corner pieces and removable
trim panel on one side), and removable
trim panels.
Material:
Stainless steel 1.4301
Surface finish:
Brushed
Accessories:
Levelling feet, see page 64.
Trim panels, modular, see page 64.
Base/plinth for ES/PC/AP
For enclosures
Width mm
Depth mm
600
400
600
500
600
600
800
400
800
500
800
600
1000
400
1200
400
1200
500
Base/plinth 200 mm high
Ø 9.4
T
14 x 18
50
Ø 9.4
14 x 18
50
30
30
T
100
50
100
25
2
12.5
37.5
100
50
100
25
98
12.5
37.5
100
98
200
98
Base/plinth 100 mm high
Model No. SO
100 mm high
200 mm high
2865.000
2875.000
2868.000
2876.000
2855.000
2877.000
2869.000
2878.000
2866.000
2879.000
2856.000
2880.000
2867.000
2885.000
2870.000
2886.000
2860.000
2887.000
□ 14 x 14
32.5
B
T = Enclosure depth – 50 mm
B = Enclosure width
Rittal Stainless steel brochure
50
25
37.5
62.5
12.5
62.5
32.5
50
25
37.5
12.5
25
25
□ 14 x 14
62.5
62.5
32.5
32.5
B
T = Enclosure depth – 50 mm
B = Enclosure width
63
Accessories
Large enclosures
Levelling feet
For mounting underneath the base/plinth.
For unhindered access e.g. when cleaning
the floor and to compensate for floor
irregularities.
Max. permissible static load:
400 kg/foot
Adjustment range:
M12: 55 mm – 125 mm
M16: 45 mm – 120 mm
Thread
M12
M16
Packs of
1 set
1 set
Model No. SO
2889.000
2890.000
Supply includes:
1 set =
4 levelling feet, 4 mounting plates,
incl. assembly parts.
German utility model no. G 94 06 468
Material:
Stainless steel 1.4301
Levelling feet, 100 mm high
For mounting on TS and ES enclosures,
for easier floor cleaning and to compensate
for floor irregularities of ± 15 mm.
Height: 100 mm
Max. permissible static load:
350 kg/foot
Material:
Feet: Brass, nickel-plated
Threaded bolts and mounting plates:
Stainless steel 1.4301
Trim panels, modular
For cable routing in the base/plinth, made
from stainless steel, e.g. when using levelling feet (see above).
One perforated plate segment is 175 mm
wide. The system punchings are suitable
for accommodating cable ties SZ 2597.000
for tidy cable routing.
Material:
Stainless steel 1.4301
Supply includes:
4 perforated plates
Packs of
1 set
Model No. SO
2859.000
Supply includes:
1 set =
4 feet,
4 threaded bolts,
4 mounting plates,
including assembly parts for the enclosure.
Number of
trim panels
For
enclosure required for a given Model No.
plinth width*
depth
SO
mm
600 800 1000 1200
mm mm mm mm
400
3
4
5
6 2907.000
500
3
4
5
6 2908.000
600
3
4
5
6 2913.000
* If the surface is to be completely
closed
Accessories:
Cable ties,
see Cat. 30, page 1010.
Fastening bolt
for base / plinth
Through the clampable fastening bolts,
cable clamp rails and standard horizontal
C rails can be fitted.
Material:
Hexagon section steel,
19 mm across flats
Surface finish:
Zinc-plated, passivated
For trim panel
height mm
100
200
Model No. SZ
2819.000
2819.200
Accessories:
Cable clamp rail,
see Cat. 30, page 898.
167*
117*
67
Supply includes:
10 fastening bolts
* only for a height of 200 mm
64
Rittal Stainless steel brochure
Accessories
Large enclosures
Cable entry plates
for TS
For simple and quick cable entry and
sealing in combination with:
● Cable entry grommets
● Connector grommets.
These are used instead of segments of the
standard divided gland plates.
Material:
Stainless steel 1.4301
Supply includes:
2 or 4 cable entry plates
including assembly parts.
Cable entry grommets
In conjunction with the cable entry plate,
for simple, fast sealing of cables inserted
into the base area of enclosures.
Material:
Outer cover: Polypropylene
Seal: Cellular rubber
Protection category:
IP 55 to EN 60 529/10.91
Connector grommets
In conjunction with cable entry plates, for
the entry of cables pre-assembled with
connectors.
Suitable for cable diameters from
8 to 36 mm.
Enclosure Cutouts Packs Model No.
width mm per plate
of
TS
600
5
2
8700.600
800
8
2
8700.800
1200
6
4
8700.120
Order cable entry plates in 1.4404
(AISI 316L), with extension no. .XX5.
Delivery times available on request.
German patent no. 42 07 281
European patent no. 0560119
with validity for FR, GB, IT, NL
Japanese patent no. 2533052
US patent no. 5,422,436
Cables per
grommet
8
3
1
Packs of 25
max. Ø mm
13
21
47
Model No.
PS
4316.000
4317.000
4318.000
German patent no. 42 07 281
European patent no. 0560119
with validity for FR, GB, IT, NL
Japanese patent no. 2533052
US patent no. 5,422,436
Packs of
10
Model No. PS
4311.000
German patent no. 40 28 570
Material:
Outer cover: Polypropylene covered with
thermoplastic elastomer
Seal: Cellular rubber
Three examples from a wide range of possibilities
The illustrations show three examples for the positioning of cable
entry plates instead of segments of the standard three-part gland
plates. In that way a positioning suitable for the mounting plate
is possible.
Thanks to the enclosure symmetry, where dimensions permit, cable
entry plates may also be inserted in the enclosure depth, right and
left, analogous to the gland plates.
Rittal Stainless steel brochure
65
Accessories
Large enclosures
Side panels, screw-fastened
for TS
To finish a complete enclosure. Easy
attachment on the inside vertical enclosure
frame member.
Earthing inserts ensure automatic potential
equalisation and a higher degree of EMC
protection. Earth studs with contact surfaces already included.
Height
Depth
Packs Model No.
mm
mm
of
TS
1800
400
2
8700.840
1800
500
2
8700.850
2000
600
2
8700.060
To order side panels in 1.4404 (AISI 316L),
use the Model No. 8705.XXX.
Delivery times available on request.
Material:
Stainless steel 1.4301, 1.5 mm
Surface finish:
Brushed
363/463/563
Protection category:
IP 55 to EN 60 529/10.91
500/575
250/350/450
30
1
1797/1997
500/575
525/575
1697/1897
25
Supply includes:
2 side panels, 16 panel holders
including assembly parts.
275/375/475
1 = usable interior surface
Hose-proof hoods
for fan-and-filter units
When the hose-proof hood is mounted
above the fan-and-filter unit and outlet filter
in conjunction with a fine filter mat, a protection category of IP 55 to EN 60529/10.91
is achieved. Particularly suitable for use in
the food industry.
Material:
Stainless steel
For fan-andDimensions
Model No.
filter unit
in mm
SK
SK 3321. . . . 150 x 260 x 40 3321.800*
SK 3322. . . . 176 x 270 x 55 3322.800
SK 3323. . . . 233 x 410 x 55 3323.800
SK 3324. . . .
282 x 500 x 85 3324.800
SK 3325. . . .
SK 3326. . . .
350 x 560 x 110 3326.800
SK 3327. . . .
* Delivery times available on request.
Conforms to NEMA 3R + 12 in conjunction
with fan-and-filter units/outlet filters.
66
Rittal Stainless steel brochure
Accessories
Large enclosures
Cover for baying (top)
for TS
A cover may additionally be clipped over
the seal between two enclosures, simply
with two end caps. This prevents dirt and
liquid from collecting on the baying seal.
Material:
Stainless steel 1.4301
End caps: ABS plastic, black
For enclosure
Model No.
Packs of
depth mm
TS
400
1
8700.140
500
1
8700.150
600
1
8700.160
Order cover in 14404 (AISI 316L),
with extension no. .1X5.
Delivery times available on request.
Surface finish:
Brushed
31.5
Supply includes:
Cover incl. 2 end caps.
Note:
May also be fitted in the width with enclosures bayed back to back.
German patent no. 19737667
Baying connector, external
for TS
For connecting bayed TS sections from the
outside.
Installation:
Simply position on the outside and screwfasten from either inside or outside.
Material:
Stainless steel 1.4301
Supply includes:
Baying connector, including assembly
parts.
German patent no. 19737668
Torx screw
Special screw for the holes in the enclosure frame. Suited to high stainless steel
strength. For use with all enclosure systems with round holes
(TS, ES, PC, AP universal consoles).
Packs of
6
Model No. TS
8700.000
Possible
alternative:
Baying technology for:
Robust baying connection when
transporting bayed enclosures,
see Cat. 30, page 912/913.
The installation on site or for provisional
siting in the workshop,
see Cat. 30, page 914/915.
Packs of
300
Model No. SZ
2486.300
Supply includes:
1 pack of 300
Rittal Stainless steel brochure
67
Accessories
Large enclosures
Comfort handle
for locking applications
for TS
Prepared for the installation of lock inserts,
safety and push-button inserts.
Length: 295 mm
Material:
Die-cast zinc
Packs of
1
Model No. TS
8611.330
Accessories:
Lock inserts,
safety and push-button inserts, see below.
Surface finish:
Matt nickel-plated
Lock inserts
For comfort handles and the standard TS
lock (in exchange for the standard doublebit lock insert).
Material:
Die-cast zinc
Lock and
push-button insert
For installation in the comfort handles
for lock inserts.
Comfort handle
for semi-cylinder
for TS
Prepared for the installation of standard
semi-cylinders 40 or 45 mm in length to
DIN 18254 and security and push-button
inserts.
Length: 302 mm
Design
7 mm square
8 mm square
6.5 mm triangular
7 mm triangular
8 mm triangular
Screwdriver
Daimler
Double-bit, 3 mm
Fiat
Design
Lock insert
Lock no. 3524 E
Push-button insert
Push-button and lock
insert,
lock no. 12321,
no other lock is
possible
* with 2 keys
Packs of
1
Model No. TS
8611.100
8611.110
8611.220
8611.120
8611.130
8611.140
8611.150
8611.160
8611.170
Model No. TS
8611.180*
8611.190
8611.200*
Model No. TS
8611.340
Accessories:
Lock and push-button insert,
see above.
Material:
Die-cast zinc
Surface finish:
Matt nickel-plated
Lock and
push-button inserts
For installation in
● the comfort handle for semi-cylinder,
see above,
● Ergoform-S standard,
see Cat. 30, page 939.
68
Design
Lock insert
Lock no. 3524 E
Push-button insert
Lock and pushbutton insert,
lock no. 2123;
no other lock is
possible
* with 2 keys
Model No. SZ
2467.000*
2468.000
2469.000*
Rittal Stainless steel brochure
Accessories
Large enclosures
Hinge 180°
for TS
For retrospective conversion of standard
doors with 130° hinges.
Single handed installation:
● Exchange frame-side hinged parts for
180° hinges
(4 screws).
● Drill door at the pre-marked points.
● Screw on door-side hinge parts.
● Hang door.
● Push in captive hinge pins.
Material:
Die-cast zinc
Hinge pins: Stainless steel
Surface finish:
Matt nickel-plated
Packs of
4
Model No. TS
8701.180
Supply includes:
4 x 180° hinges, including assembly
screws. For twin doors, 2 packs units are
required.
Note:
Door configurations such as the comfort
handle can restrict the door opening angle.
The hinge pins may only be actuated and
the door removed with the door open.
The hinge cannot be dismantled from the
outside with the door closed (access protection).
Hinge 180°
Packs of
6
for ES/AP universal consoles
For retro-converting standard stainless
steel doors with 130° hinges, including
assembly material.
Model No. PS
4156.000
Material:
Stainless steel 1.4301
Viewing window
Material:
Stainless steel 1.4301
Single-pane safety glass
Protection category:
IP 54 to EN 60 529/10.91
Supply includes:
Viewing window with cam lock,
including assembly parts.
Width Height Depth
mm
mm
mm
522
600
38
722
600
38
B1
mm
408
608
Model No.
FT
2793.560
2793.760
Other widths and heights available on
request.
Accessories:
Lock inserts 27 mm,
design A,
see Cat. 30, page 942.
Ergoform-S handle SZ 2452.000,
see Cat. 30, page 939.
B
37.5
The perfect solution for display and control
elements in all areas with high hygiene
standards. Fitted as standard with internal
130° hinges and all-round seal.
The double-bit lock insert may be exchanged for 27 mm lock inserts, design A
and Ergoform-S handle SZ 2452.000.
B1
525
475
285
543
600
25.5
Rittal Stainless steel brochure
25
31
38
B = Width
69
More system accessories for perfect, cost-effective configuration of
the various stainless steel cases and enclosures can be found in
Rittal Catalogue 30.
Page in the
catalogue 30
Base / plinth
Levelling feet
Base assembly plate
Base
Twin castors
Gland plates
Cable clamps
Support rails
Walls
Divider panels
Module plates for connectors
Baying system
for transport
for baying at the installation site
Door
Viewing window
Operating panels
Door, external
Door, internal
Lock systems
Lock systems
Hinges
70
878 – 890
886/887
886
891 – 901
891
896
898
899
902 – 909
906 – 907
908
910 – 917
912 – 913
914 – 915
928 – 935
950 – 953
928 – 932
933
934 – 935
950 – 953
936 – 949
936 – 947
948 – 949
Rittal Stainless steel brochure
Rittal system accessories
in the Rittal Catalogue 30
Page in the
catalogue 30
Roof / wall mounting
Roof
Wall mounting
Interior installation
Cable ducts
Mounting plates
Rail systems
Component shelves
Mobile workstations
General accessories
System lights
Connection accessories
Signal pillar
Optical/acoustic components
Mounting components
Mouse, mouse pad IP 67
Mouse, mouse pad IP 67
Cable attachment / earthing
Cable attachment
Earthing/potential equalisation
482.6 mm (19˝) installation system
Swing frame
Mounting angles
Slide rails
Drawers
Blanking plates
Rittal Stainless steel brochure
954 – 963
954 – 961
962 – 963
964 – 996
964
965 – 969
970 – 985
986 – 993
995
996
997 – 999
999
1000 – 1002
1001
1002
1004 – 1005
1004 – 1005
1010 – 1013
1010
1011 – 1013
1014 – 1037
1014 – 1025
1026 – 1031
1027 – 1033
1034 – 1035
1036
71
With the right climate control components, you can significantly
With one of the world’s leading project ranges and a comprehen-
reduce the risk of expensive system failures or machine downtime
sive range of services, including thermal analysis, Rittal offers indi-
caused by overheating. Heat is still the number one enemy of
vidual solution concepts to minimize risks and boost productivity.
sensitive microelectronics. Overheating and temperature fluctuations are the most common cause of malfunctions and failures.
High cooling output,
central and cost-effective
Recooling systems
Enclosure cooling, machine and process
cooling as well as the cooling of liquids
and emulsions can be achieved centrally
from one recooling system.
Several items of equipment are easily connected in parallel.
Useful cooling output
from 0.96 kW – 176 kW
Air/water heat exchanger
For enclosure cooling in extreme ambient
conditions, a combination of recooling systems and air/water heat exchangers offers
an effective way of dissipating very high
heat loads.
If necessary, the enclosures and piping
can be designed in stainless steel.
Useful cooling output
from 600 W – 5000 W
Integral cooling technology
It sets standards for the modern unity
between enclosure and cooling components, both now and in the future. The cooling unit built into the enclosure door or side
panel keeps the enclosure internal temperature at the desired level, irrespective of
the ambient temperature. Thanks to two
mechanically separate, well-insulated air
circuits, the ingress of dust from the environment into the enclosure via the cooling
system is prevented.
The integral cooling system
● is sure to impress, with its particularly
effective cooling
● helps to cut the time spent on assembly
● reduces investment costs for the complete unit
Useful cooling output
from 1100 W – 2500 W
72
Enclosure climate control
System benefits
Safety is our
top priority
Enclosure surfaces
are kept free
SK customer service
Thermographic measurements on the populated
enclosures.
Roof-mounted cooling units
Roof mounting means that all enclosure
surfaces are kept free for control and display devices. Transportation and escape
routes are not obstructed. Depending on
the siting conditions and interior installation of the enclosure, we offer flexible air
routing for the outer and inner circuits.
Control is achieved using a built-in Basic or
Comfort controller.
le
ilab
a
v
a
el
also ss ste
w
No tainle
in s
Useful cooling output
from 500 W – 4000 W
Effective in every
performance category
Wall-mounted cooling units
Whether 225 W useful cooling output for
effective heat dissipation of command
panels, for example, or 4,000 W for the
dissipation of extremely high heat loads,
the refrigeration factor of Rittal cooling unit
technology demonstrates exceptionally
effective use of the power input.
The increased demands on network technology design are met to perfection by the
styling, with the option of full installation,
partial installation or external mounting.
Like the roof-mounted cooling units, the
wall-mounted cooling units are also
equipped with either Basic or Comfort controllers.
Useful cooling output
from 225 W – 4000 W
Risk minimisation through
central monitoring
This is achieved particularly effectively,
thanks to a combination of Rittal climate
control components with central monitoring
and control via the CMC.
Temperature limits are perfectly maintained, any potential defects are identified
to enable preventive action, and service
requirements are notified promptly and
organised from a central location.
Rittal Stainless steel brochure
73
Individual solutions to perfection
System platforms offer cost benefits
R
At Rittal, even “tailor-made” individual solutions
are based on our comprehensive knowledge of
system platforms for enclosures and cases.
In other words, the perfection and cost benefits
of mass-produced products are combined with customerspecific designs and features.
The outstanding benefits include perfect quality, significantly
lower costs, and precise implementation of customer requirements.
1. Assembly of system accessories
2. Modification of standard components
Ideas based on serial products are implemented to perfection ex works:
● Holes and cutouts
● Insertion of acrylic or safety
glass windows
● Your logo, sand/bead
blasted
● Other surface finishes
Make use of the versatile
opportunities offered by Rittal
system accessories! With full
internal mounting available ex
works.
A service to save you time and
money.
74
Example: Duct alarm box
● AE compact enclosure with
rain canopy in sprayfinished stainless steel
● Cutouts with opal plexiglass
panels
● Interior case for fire extinguisher and telephone
Rittal Stainless steel brochure
Material specifications
Rittal material diversity
Germany
German material
DIN designation
number
Europe
DIN EN designation
1
2
1.4301 (V2A)
1.4404
X 5 CrNi 18 10
X 2 CrNiMo 17-12-2
X 5 CrNi 18 10
X 2 CrNiMo 17-12-2
1
2
SAE J 405
30304
–
USA
AISI
304
316L
UNS
S 30400
–
1
2
UK
British Standard
304 S 15/16/31
316 S 11
France
AFNOR NF
Z 5 CN 17-08
Z 3 CND 17-11-02
Italy
UNI
X 5 CrNi 18 10
X 2 CrNiMo 17-12-2
1
2
Sweden
SS 14
2332/2333
2348
Russia
GOST
08Ch 18 N 10
–
Japan
JIS
SUS 304
SUS 316L
1
2
PR of China
GB
0Cr18Ni9(N)
00Cr17Ni14Mo2
3. Modified dimensions
Apart from stainless steel, we
also offer enclosures in the
following materials to suit all
applications:
Cast aluminium
Sheet steel, electrophoretic dipcoat
primed and powder coated
Sheet aluminium
Polycarbonate
Sheet steel with an aluminium zinc
surface finish
Polyester, fibreglass-reinforced
4. Individual solutions
Size variants are possible for all
stainless steel enclosures on
request:
● Enclosure systems TS/ES on
a 25 mm pitch pattern
● Enclosure systems without
pitch pattern
Project-specific solutions, fully
fitted and delivered on time – all
part of the Rittal service!
Rittal Stainless steel brochure
75
Table of order numbers
Model No.
Page
Model No.
Page
Model No.
Page
Model No.
Page
1002.600
1004.600
1005.600
1006.600
1007.600
1008.600
1009.600
1010.600
1012.600
1013.600
1014.600
1016.600
1017.600
1018.600
1019.600
1024.010
1024.020
1024.030
1024.040
1024.810
1024.820
1024.830
1024.910
1024.920
1024.930
1521.010
1522.010
1523.010
1524.010
1525.010
1526.010
1558.010
1559.010
1560.700
1561.700
1562.700
1563.700
1564.700
1565.700
1566.700
1567.700
1568.700
1569.700
1570.700
1571.700
1572.700
1573.700
1574.700
1575.700
1576.700
1583.010
1584.010
1585.010
1594.000
2304.000
2361.000
2362.000
2363.000
2433.000
2467.000
2468.000
2469.000
2470.000
2471.000
2472.000
2473.000
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
22
22
22
22
22
22
22
22
22
22
14
14
14
14
14
14
16
16
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
16
16
16
26
24
25
25
25
26
68
68
68
25
25
25
25
2474.000
2475.000
2486.300
2493.000
2534.500
2583.000
2584.000
2683.600
2684.600
2685.600
2686.600
2688.600
2689.600
2690.000
2691.000
2793.560
2793.760
2819.000
2819.200
2855.000
2856.000
2859.000
2860.000
2865.000
2866.000
2867.000
2868.000
2869.000
2870.000
2875.000
2876.000
2877.000
2878.000
2879.000
2880.000
2885.000
2886.000
2887.000
2889.000
2890.000
2907.000
2908.000
2913.000
3321.800
3322.800
3323.800
3324.800
3326.800
4156.000
4311.000
4316.000
4317.000
4318.000
4619.660
4641.000
4642.000
4650.000
4650.704
5450.600
5451.600
5452.600
5453.600
5454.600
5455.600
6143.300
6143.310
25
25
67
24
24
26
25
42
42
42
42
44
44
49
49
69
69
64
64
63
63
64
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
64
64
64
64
64
66
66
66
66
66
69
65
65
65
65
49
48
48
46
46
58
58
58
58
58
58
41
41
6535.010
6536.010
6538.010
6539.010
6660.000
6660.010
6660.020
6660.050
6660.100
6660.110
6660.120
6660.200
6660.210
6660.220
6663.000
6663.400
6663.500
6664.000
6664.100
6664.500
6665.000
6665.500
6670.000
6672.000
6680.000
6680.010
6680.100
6680.110
6681.000
6681.100
6682.000
6902.960
8450.600
8451.600
8452.600
8453.600
8454.600
8455.600
8456.600
8457.600
8611.100
8611.110
8611.120
8611.130
8611.140
8611.150
8611.160
8611.170
8611.180
8611.190
8611.200
8611.220
8611.330
8611.340
8700.000
8700.060
8700.120
8700.140
8700.150
8700.160
8700.600
8700.800
8700.840
8700.850
8701.040
8701.050
34
34
34
34
36
36
36
36
36
36
36
36
36
36
38
39
39
37
37
37
40
40
32
32
30
30
30
30
30
30
31
49
54
54
54
54
54
54
54
54
68
68
68
68
68
68
68
68
68
68
68
68
68
68
67
66
65
67
67
67
65
65
66
66
62
62
8701.060
8701.180
8701.200
8701.600
8701.800
8702.040
8702.050
8702.060
8702.200
8702.600
8702.800
8800.900
62
69
62
62
62
62
62
62
62
62
62
49
76
Rittal Stainless steel brochure
Index
A
Accessories
– Compact enclosures
– Human/machine interface
– Large enclosures
AE Compact enclosures
Assembly parts for support arm
F
24 – 27
48 – 49
62 – 69
18
37
B
Base plate for pedestal
Base/plinth
Baying connector, external
Baying system, internal
Baying systems
Baying systems TS 8
– Detailed drawings
Bus enclosures BG
41
62 – 63
67
70
54
56
16
Cable entry grommets
65
Cable entry plates
65
Cam lock
24
Clip-down handle
– Comfort handle
68
Comfort handle
– for locking applications
68
– for semi-cylinder
68
Command panels
32
Compact enclosures
12 – 23
– Accessories
24 – 27
Compact enclosures AE
18
– Dimensions in detail
20
Compact enclosures ES, single
58
Component shelf, pull-out
49
Component shelf, static installation
49
Connector grommets
65
Consoles
42 – 45
Cover for baying (top)
67
Cover for fan-and-filter units
66
49
56
20
60
68
49
49
H
Handles
Hinge 180°
Hood for fan-and-filter units
Hose-proof hoods
Housing coupling
Human/machine interface
– Accessories
68
69
66
66
37
28 – 47
48 – 49
Keyboard drawer
Keyboard housing
49
30
L
Large enclosures
– Accessories
Levelling feet
Lock
– for semi-cylinder
Lock and push-button insert
Lock cover
Lock inserts
Mobile PC workstation
Mounting bracket
Mounting for support arm
Mounting plate
Mounting plates for KL
37
67
41
50 – 61
62 – 69
64
24
68
24
68
58
46
54
25
31
41
25
S
Screw, Torx
67
Semi-cylinder lock
24
Shelf
– Component shelf, pull-out
49
– Component shelf, static installation
49
– for PC workstation
48
Side panels, screw-fastened
66
Support arm system
36 – 40
Support section
36
Swivel base mount
39
Terminal boxes KL
Terminal boxes Premium Line KL
Tilting adaptor, 10°
Torx screw
Trim panel
– Trim panels, modular
TS 8 baying systems
TS baying systems
– Detailed drawings
TS enclosures, bayable
TS hinge 180°
Tube
– Support section
48
22
37 – 38
22
27
14
22
37
67
64
54
56
54
69
36
36
U
Universal consoles AP
44
V
Viewing window
69
W
O
42
30
34
P
PC
– Enclosure systems
Pedestal base plate, small
Pedestal, modular, small
Pole clamp
Premium Line KL
Premium Panel
Rain canopies for AE
Rear panel holder for Premium Panel
Reinforcement for enclosures
– Enclosure reinforcement
Roof
– Rain canopies for AE
T
K
One-piece consoles AP
Operating and keyboard housing
Operating housing
E
Rittal Stainless steel brochure
65
M
D
Desk section
Detailed drawings
– Baying systems TS 8
– Compact enclosures AE
– Free-standing enclosures ES 5000
Door handles
Drawer
– Component shelf, pull-out
– Keyboard drawer
64
58
60
G
Gland plates
– Cable entry plates
C
Enclosure attachment
Enclosure connector
– Baying connector, external
Enclosure reinforcement
Enclosure systems
– ES
– PC
– TS
Fastening bolt for base/plinth
Free-standing enclosures ES 5000
– Detailed drawings
R
46
41
41
25
22
30
Wall angle
Wall bracket
Wall mounting bracket
Wall/base mounting, rigid
Wall-mounted enclosures
– with cover screwed
Wall-mounting
– with door
Walls
– Side panels, screw-fastened
Windows
– Viewing window
Wiring lecterns
26
40
26
38
14
16 – 19
66
69
42 – 45
77
Notes
78
Rittal Stainless steel brochure
Rittal international
Agencies worldwide
China
Rittal Electrical Equipment
(Shanghai) Co. Ltd.
No. 353, Ri Ying North Road
P. R.China
Shanghai, 200131
Tel.: +86(21) 50461671
Fax: +86(21) 50461990
email:
[email protected]
Colombia
COLSEIN Ltda.
Medición y Automatización
Calle 82 No. 5 – 48
Apartado Aereo 55479
Santafé de Bogotá,
D.C. Columbia
Tel.: +57(1) 6102674
Fax: +57(1) 6107868
email: [email protected]
Argentina
Racklatina S.A.
Av. Pedro B.
Palacios 81 – 85
1704, Ramos Mejía
Buenos Aires
Tel.: +54(11)4656-3231
Fax: +54(11)4656-2323
email: [email protected]
Australia
Rittal Pty. Ltd.
130 – 140 Parraweena Rd.
Taren Point. 2229 N.S.W
Tel.: +61(2) 95252766
Fax: +61(2) 95255302
Free Call 1800350665
email: [email protected]
Austria
Rittal-Schaltschränke
Ges.m.b.H.
Laxenburger Straße 246a
A-1239 Wien
Tel.: +43(1) 61009-0
Fax: +43(1) 61009-21
email: [email protected]
Bahrain
Please contact
Rittal Middle East FZE
Dubai/U.A.E.
Belarus
Netexpert
Volocha Str. 1 of 310
220036 Minsk
Tel.: +375 (172) 862003
Fax: +375 (172) 566515
Belgium
Rittal nv/sa
Industrieterrein E17/3
Stokkelaar 8
B-9160 Lokeren
Tel.: +32(9) 3539111
Fax: +32(9) 3556862
email: [email protected]
Bosnia-Herzegovina
SYS Company d.o.o.
Sibenska b.b.
BiH-71000 Sarajevo
Tel.: +387/33/277090
Fax: +387/33/230557
email: [email protected]
Brazil
Rittal Sist. Eletrom. Ltda.
Av. Cândido Portinari,
nr. 1.174
VI Jaguara
05114-001 São Paulo-SP
Tel.: +55(11) 36222377
Fax: +55(11) 36222399
email: [email protected]
Bulgaria
RITTBUL Ltd.
56 Gorski patnik Str. Office 5
BG-1421 Sofia
Tel.: +359(2) 651066
Fax: +359(2) 9632516
email: [email protected]
Canada
Rittal Systems Ltd.
7320 Pacific Circle
Mississauga, Ontario
L5T 1V1
Tel.: +1(905) 7950777
Fax: +1(905) 7959548
email:
[email protected]
Chile
AMMY S.A.
Camino El Cerro 5090
Casilla 241-V C21
Huechuraba
Santiago
Tel.: +56(2) 7400102
Fax: +56(2) 7401065
email:
[email protected]
Costa Rica
Elvatron
400 metros norte
de la agencia del
Banco de Costa Rica
San José
Tel.: +506(296)1060
Fax: +506(232)6071
Croatia
Technoshell D.O.O.
Av. V. Holjevca 20/III
10020 Zagreb
Tel./Fax:
+385/1/6553-547
email: [email protected]
Cyprus
Christos Charalambous
& Sons Ltd.
9 – 11 Zanettos Street
P.O. Box 1268
Nicosia
Tel.: +357/27720 55
Fax: +357/24581 97
email:
[email protected]
Czech Republic
Rittal Czech, s.r.o.
Ke Zdibsku 182
250 66 Zdiby u Prahy
Tel.: +420234099000
Fax: +420234099099
email: [email protected]
Denmark
Duelco a/s
Holtvej 10
Hoeruphav
6400 Soenderborg
Tel.: +45-74 415284
Fax: +45-74 415209
email:
[email protected]
Dubai/U.A.E.
Rittal Middle East FZE
Warehouse GC2
P.O.Box 17 599
Jebel Ali Free Zone – Dubai
U.A.E.
Tel.: +971(4) 8834131
Fax: +971(4) 8834244
email:
[email protected]
Egypt
Rittal Egypt S.A.E.
45, Gamiat Al Dewal
Al Arabia St.
Mohandesine, Giza
Tel.: +2(012) 74 28 012
Fax: +2(02) 74 82 276
Finland
Rittal Oy
Valimotie 35
PL 134
01510 Vantaa
Tel.: +358 9 4134400
Fax: +358 9 41344410
email: [email protected]
France
Rittal France SAS
880, rue Marcel Paul
Z.A. des Grands Godets
94507 Champigny
sur Marne Cedex
Tel.: +33(1) 49836000
Fax: +33(1) 49838206
email: [email protected]
France-East
Sermes S.A.
14, rue des Frères Eberts
Boîte Postale 177
67025 Strasbourg-Cedex
Tel.: +33(3) 88407200
Fax: +33(3) 88407249
email:
[email protected]
Rittal Stainless steel brochure
Great Britain
Rittal Limited
Braithwell Way
Hellaby Industrial Estate
Hellaby
Rotherham
S Yorks
S668QY
Tel.: +44(1709) 704000
Fax: +44(1709) 701217
email:
[email protected]
Greece
RITTAL EPE
Thessalonikis 98
14342 Nea Philadelphia,
Athen
Tel.: +30/210/27 17 975
976
Fax: +30/210/27 12 398
www.rittal.gr
Guatemala
INTEK
Ingeniería y Tecnología
Via 5 y Ruta 3,
Zona 4 Esquina
01004 Guatemala, C.A.
Tel.: +50(2) 3321489
3324336
Fax: +50(2) 3344338
Hong Kong
Ranger
Enterprise Co. Ltd.
Units A-B, 8/F, Block 1
Tai Ping Industrial Center
57 Ting Kok Road
Tai Po, N. T.
Hong Kong
Tel.: +852 24208928
Fax: +852 24949228
email:
[email protected]
Hungary
Rittal Kereskedelmi Kft.
Ipari Park u.1.
1044-Budapest
Tel.: +36(1) 3998000
Fax: +36(1) 3998009
email: [email protected]
Iceland
Smith & Norland h/f
Nóatúni 4
P.O.Box 519
121 Reykjavík
Tel.: +354 520 3000
Fax: +354 520 3011
email: [email protected]
India
Rittal India Pvt. Ltd.
Nos. 23 & 24 Kiadb
Industrial Area
Veerapura
Doddaballapur
Bangalore 561203
Tel.: +91(80) 7622335
7623075
Fax: +91(80) 7623343
email: [email protected]
Indonesia
PT Dwitama Beta Perdana
Jl. R. S. Fatmawati No. 20
Blok II/209
Jakarta 12430
Tel.: +62(21) 7692834
Fax: +62(21) 75908481
email: [email protected]
Ireland
Rittal Ltd.
Unit 4C
M7 Business Park,
Newhall, Naas
Co Kildare
Ireland
Tel.: +353(45)896884
Fax: +353(45)896890
email: [email protected]
Israel
Rittal Enclosure Systems Ltd.
15, Hátarshish St. Zone 29
P.O. Box 3597
Industrial Park
Caesarea 38900
Tel.: +972(4) 6275505
Fax: +972(4) 6275535
Italy
Rittal S.p.A.
S.P. n.14 Rivoltana-Km 9,5
20060 Vignate (MI)
Tel.: +39(02) 9593 01
Fax: +39(02) 9536 0209
email: [email protected]
Japan
Rittal K.K.
1438-1 Shimonohara
Nishi-izumida
Sakai-machi, Sashima-gun
Ibaraki 306-0431
Tel.: +81(280) 875120
Fax: +81(280) 875108
email: [email protected]
Jordan
Please contact
Rittal Middle East FZE
Dubai/U.A.E.
Kuwait
Please contact
Rittal Middle East FZE
Dubai/U.A.E.
Lebanon
Please contact
Rittal Middle East FZE
Dubai/U.A.E.
Lithuania
Rittal UAB
Meistru 8
2038 Vilnius
Tel.: +370/52306669
Fax: +370/52306665
email: [email protected]
Luxembourg
D.M.E. s.a.r.l.
Distribution de matériel
électrique
Z.A.R.E. Ouest
4384 Ehlerange
Tel.: +352-574344
Fax: +352-574357
email: [email protected]
Macedonia
SiskonSystemEngineering
Taskenska 4A
MK-91000 Skopje
Tel.: +389/91/362423
Fax: +389/91/361250
email:
[email protected]
Malaysia
Rittal Systems Sdn. Bhd.
No. 5 Jalan 4/118C
Desa Tun Razak
56000 Cheras
Kuala Lumpur
Tel.: +60(3)-91736488
Fax: +60(3)-91736499
email: [email protected]
Mexico
Rittal, S.A. de C.V.
Prol. 5 de Mayo No. 29
Parque Industrial
Naucalpan
Naucalpan de Juarez
Estado de México
53489 México
Tel.: +52(55) 5300-2570
Fax: +52(55) 5300-04 95
email: [email protected]
Morocco
S.M.R.I.
Société marocaine de
réalisations industrielles
109, Rue Abou Ishak
El Marouni
20110 Casablanca
Tel.: +212-225 94 90
Fax: +212-223 77 08
email: [email protected]
Philippines
Enclosure Systems
Specialist Incorporated
G/F, GE Phils Building
2291 Pasong Tamo
Extension
Makati City 1231
Philippines
Tel.: +63(2) 8138580
Fax: +63(2) 8138596
email: [email protected]
S.R. Vietnam
ESACO Ltd.
15 – 17 Tran Quoc
Taho Street
District 3
Hochiminh City
Socialist Republic
of Vietnam
Tel.: +84(8) 9303580
Fax: +84(8) 9303193
email: [email protected]
Poland
Rittal Sp. z o.o.
Ul. Królewska 6
05-825 Grodzisk Maz.
k/Warszawy
Tel.: +48(22) 7242784
Fax: +48(22) 7240852
email: [email protected]
Sweden
Rittal Scandinavian ab
26273 Ängelholm
Tel.: +46(431) 442600
Fax: +46(431) 442637
email: [email protected]
Portugal
RITTALSIS-Sistemas
Electricos e Electronicos
Unipersonal Lda.
Z.I. Rio Meao/Apdo. 434
4520-907 Rio Meao.
Sta Ma da Feira
Tel.: +351256780210
Fax: +351256780219
email: [email protected]
Qatar
Please contact
Rittal Middle East FZE
Dubai/U.A.E.
Republic of Slovakia
Rittal s.r.o.
Plynárenská 1
SK-82109 Bratislava
Tel.: +421(2) 5363 0651
Fax: +421(2) 5363 0951
email: [email protected]
Romania
Cubrit s.r.l.
Sos. Chitilei, no. 114
Sector 1 – Bucharest
Romania
Tel./Fax: +40/21/3129497
email: [email protected]
Russia
Rittal OOO
Letchika Babushkina 1a
129344 Moscow
Tel.: +7(095) 7750230
Fax: +7(095) 7750239
email: [email protected]
Saudi Arabia
A. Abunayyan Electric
Corp.
King Abdulaziz Street
P.O. Box 321
Riyadh 11411
Kingdom of Saudi Arabia
Tel.: +966(1) 4779111
Fax: +966(1) 4793312
email:
[email protected]
abunayyangroup.com
Netherlands
Rittal bv
Hengelder 56
Postbus 246
6900 AE Zevenaar
Tel.: +31(316) 591911
Fax: +31(316) 525145
Singapore
Rittal Pte. Ltd.
7 Loyang Street
Loyang Industrial Estate
Singapore 508842
Tel.: +65-65426818
Fax: +65-65426833
email: [email protected]
New Zealand
Rittal Ltd.
5 Pretoria Street
P.O. Box 30-453
Lower Hutt
Wellington
Tel.: +64(4) 5667630
Fax: +64(4) 5669219
Slovenia
Rittal d.o.o.
Smartinska 152
SLO-1533 Ljubljana
Tel.: +386/1/5466370
Fax.:+386/1/5411710
email: [email protected]
Norway
Rittal AS
Postboks 79 Stovner
Luhrtoppen 2
0913 Oslo
Tel.: +47-67912300
Fax: +47-67912323
email: [email protected]
South Africa
Controp Rittal (Pty) Ltd.
123, Terrace Road
Sebenza
P.O. Box 462
Edenvale, 1610
Tel.: +27(11) 609-8294
Fax: +27(11) 452-5816
email: [email protected]
controprittal.co.za
Oman
Please contact
Rittal Middle East FZE
Dubai/U.A.E.
Peru
CE-YE-SA
Ingenieria Electrica
Av. Enrique Meiggs
255 – 257
Parque Internacional
de Industria y Comercio
Callao
Tel.: +51(1) 4517936
Fax: +51(1) 4517272
South Korea
Rittal Co. Ltd.
1 NA 509 Sihwa-Gongdan
1254-8 Jeungwang-Dong
Sihung-Shi, Gyeonggi-Do
Korea 429-450
Tel.: +82(031) 499-5961~3
Fax: +82(031) 499-5964
email: [email protected]
Spain
Rittal Disprel, S.A.
Mas Baiona, 40
Polígono Industrial
Can Roqueta
08202 Sabadell
(Barcelona)
Tel.: +34(93) 7001300
Fax: +34(93) 7001301
email: [email protected]
Switzerland
Rittal AG
Ringstrasse 1
5432 Neuenhof
Tel.: +410564160600
Fax: +410564160666
email: [email protected]
Syria
Please contact
Rittal Middle East FZE
Dubai/U.A.E.
Taiwan
Rittal Systems Taiwan Ltd.
13 – 1 Fl., No. 87,
Wen Hua 3rd Rd.
Kuei Shan
Taoyuan Hsien
Taiwan
Tel.: +886 (3) 397-1745
(3) 327-8871
Fax: +886 (3) 397-2019
email:
[email protected]
Thailand
Rittal Ltd.
101 Soi 7, Saeree 7
Rama 9 Road
Kwaeng Suanluang
Khet Suanluang
Bangkok 10250
Tel.: +66 (2) 7183296
(2) 7183297
Fax: +66 (2) 7183298
email: [email protected]
Turkey
STOKS Ltd.
Zümrütevier Mah. Visne
Sok. No: 5
81530 Maltepe
Istanbul/Turkey
Tel.: +90(2 16) 4417009
4515739
Fax: +90(2 16) 4591290
email:
[email protected]
Ukraine
Advanced Network
Technology
Scherbakova Str. 37
04111 Kiev
Tel.: +38(44) 495 11 36
Fax: +38(44) 443 95 22
USA
Rittal Corporation
One Rittal Place
Springfield, OH 45504
Tel.: +1(9 37) 3 99-05 00
Fax: +1(9 37) 3 90-55 99
email: [email protected]
Uzbekistan
Naytov Ltd.
Ul. Matbuotschilar 32
700047 Taschkent
Tel.: +9 98/71-132 08 56
Fax: +9 98/71-132 08 59
Venezuela
EMI
Equipos y sistemas C. A.
Edificio Centro Cyanamid,
P.B. Calle 1 – 2
La Urbina – 1073 Caracas
Tel.: +58(212) 243 6401
5072
Fax: +58(212) 243 6401
Yemen
Please contact
Rittal Middle East FZE
Dubai/U.A.E.
Yugoslavia
Vesimpex d.o.o.
Petra Konjovica 12 v
11090 Beograd
Tel./Fax:
+3 81/11/35 10 683
email:
[email protected]
Stand: 30.12.03 09:04:29
Germany
Rittal GmbH&Co.KG
Postfach 1662
D-35726 Herborn
Tel.: +49 (2772) 505-0
Fax: +49 (2772) 505-2319
email: [email protected]
www.rittal.com
79
Global Rittal. Worldwide service.
Industrial enclosures
Small enclosures
Compact enclosures
Large enclosures
PC enclosure and case systems
Console systems
Industrial Workstations
Electronic packaging
Command panel systems
Stainless steel enclosures and support arm systems
EMC shielding enclosures
Ex enclosures
System climate control
Power distribution
IT solutions
Rittal has one of the largest ranges of enclosures available for
The global alliance between production, distribution and
immediate delivery. However, Rittal also supplies integral
service guarantees customer proximity. World-wide!
solutions at a high level – up to Level 4. Fully assembled and
Wherever in the world you develop and implement solutions
functional, according to your specific requirements. Wherever
for yourself and your customers, we are close at hand.
09/03 E121
Communication systems
your location.
Rittal GmbH & Co. KG
P.O. Box 1662
D-35726 Herborn
Telephone: +49(0)2772 505-0
Telefax: +49(0)2772 505-2319
eMail: [email protected]
www.rittal.com
R
Switch to perfection
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement