Boss Audio Systems | R1004 | Service manual | Boss Audio Systems R1004 Service manual

MEX-M70BT
SERVICE MANUAL
US Model
Canadian Model
Ver. 1.3 2014.12
Note: This service manual is
also applicable to areas
other than the US and
Canadian.
The service manual of the mechanism deck, used in
this model, has been issued in a separate volume.
Please refer to the service manual of the MG-101
series for the mechanism deck information.
• The tuner and CD sections have no adjustments.
Model Name Using Similar Mechanism
CDX-G3000UP
Mechanism Type
MG-101CF-188
Optical Pick-up Name
DAX-25A
SPECIFICATIONS
FOR THE CUSTOMERS IN THE USA. NOT
APPLICABLE IN CANADA, INCLUDING IN THE
PROVINCE OF QUEBEC.
POUR LES CLIENTS AUX ÉTATS-UNIS. NON
APPLICABLE AU CANADA, Y COMPRIS LA
PROVINCE DE QUÉBEC.
AUDIO POWER SPECIFICATIONS
CEA2006 Standard
Power Output: 17 Watts RMS × 4 at 4
Ohms < 1% THD+N
SN Ratio: 80 dBA
(reference: 1 Watt into 4 Ohms)
Tuner section
FM
Tuning range:
87.5 – 108.0 MHz (at 50 kHz step)
87.5 – 108.0 MHz (at 100 kHz step)
87.5 – 107.9 MHz (at 200 kHz step)
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 80 dB (stereo)
Separation: 50 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
AM
Tuning range:
531 – 1,602 kHz (at 9 kHz step)
530 – 1,710 kHz (at 10 kHz step)
AM tuning step:
9 kHz/10 kHz switchable
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency:
9,124.5 kHz or 9,115.5 kHz/4.5 kHz (at 9 kHz step)
9,115 kHz or 9,125 kHz/5 kHz (at 10 kHz step)
Sensitivity: 26 μV
CD Player section
Signal-to-noise ratio: 120 dB
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit
Corresponding codec: MP3 (.mp3) and WMA (.wma)
USB Player section
Interface: USB (High-speed)
Maximum current: 1 A (front), 2.1 A (rear)
The maximum number of recognizable tracks:
10,000
Corresponding codec:
MP3 (.mp3), WMA (.wma) and WAV (.wav)
Wireless Communication
General
Communication System:
BLUETOOTH Standard version 3.1
Output:
BLUETOOTH Standard Power Class 2
(Max. +4 dBm)
Maximum communication range:
Line of sight approx. 10 m (33 ft)*1
Frequency band:
2.4 GHz band (2.4000 – 2.4835 GHz)
Modulation method: FHSS
Compatible BLUETOOTH Profiles*2:
A2DP (Advanced Audio Distribution Profile) 1.3
AVRCP (Audio Video Remote Control Profile) 1.5
HFP (Handsfree Profile) 1.6
PBAP (Phone Book Access Profile)
SPP (Serial Port Profile)
MAP (Message Access Profile)
HID (Human Interface Device Profile)
Outputs:
Audio outputs terminal (front, rear, sub)
Power antenna (aerial)/Power amplifier control
terminal (REM OUT)
Inputs:
SiriusXM input terminal
Remote controller input terminal
Antenna (aerial) input terminal
MIC input terminal
AUX input jack (stereo mini jack)
USB port: front, rear
Power requirements:
12 V DC boat battery (negative ground (earth))
Dimensions:
Approx. 178 mm × 50 mm × 177 mm
(7 1/ 8 in × 2 in × 7 in) (w/h/d)
Mounting dimensions:
Approx. 182 mm × 53 mm × 160 mm
(7 1/ 4 in × 2 1/ 8 in × 6 5/ 16 in) (w/h/d)
Mass: Approx. 1.2 kg (2 lb 11 oz)
Package contents:
Remote commander (1): RM-X231
Microphone (1)
Parts for installation and connections (1 set)
Marine remote commander: RM-X11M
*1 The actual range will vary depending on factors such
as obstacles between devices, magnetic fields
around a microwave oven, static electricity,
reception sensitivity, antenna (aerial)’s performance,
operating system, software application, etc.
*2 BLUETOOTH standard profiles indicate the purpose
of BLUETOOTH communication between devices.
Power amplifier section
Output: Speaker outputs
Speaker impedance: 4 – 8 ohms
Maximum power output: 55 W × 4 (at 4 ohms)
* Accessories/equipment other than the marine
remote commander RM-X11M are not waterproof. Do
not subject them to water.
Design and specifications are subject to change
without notice.
AUDIO SYSTEM
9-893-929-04
2014L33-1
© 2014.12
Sony Corporation
Published by Sony Techno Create Corporation
MEX-M70BT
Copyrights
SiriusXM Connect Vehicle Tuner and Subscription
sold separately.
www.siriusxm.com
Sirius, XM and all related marks and logos are
trademarks of Sirius XM Radio Inc. All rights
reserved.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Sony Corporation is under
license. Other trademarks and trade names are
those of their respective owners.
The N-Mark is a trademark or registered trademark
of NFC Forum, Inc. in the United States and in other
countries.
Windows Media is either a registered trademark or
trademark of Microsoft Corporation in the United
States and/or other countries.
This product is protected by certain intellectual
property rights of Microsoft Corporation. Use or
distribution of such technology outside of this
product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered in
the U.S. and other countries. App Store is a service
mark of Apple Inc.
MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and Thomson.
Pandora, the Pandora logo, and the Pandora trade
dress are trademarks or registered trademarks of
Pandora Media, Inc., used with permission.
Google, Google Play and Android are trademarks of
Google Inc.
BlackBerry® is the property of Research In Motion
Limited and is registered and/or used in the U.S.
and countries around the world. Used under license
from Research In Motion Limited.
NOTES ON CHIP COMPONENT REPLACEMENT
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be damaged by heat.
FLEXIBLE CIRCUIT BOARD REPAIRING
• Keep the temperature of soldering iron around 270 °C during
repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
CAUTION
The use of optical instruments with this product will
increase eye hazard.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation exposure.
2
SAFETY-RELATED COMPONENT WARNING!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE
PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
MEX-M70BT
SECTION 1
SERVICING NOTES
TABLE OF CONTENTS
1.
SERVICING NOTES .............................................
2.
GENERAL .................................................................. 16
3.
DISASSEMBLY
3-1. Disassembly Flow ...........................................................
3-2. Mini Fuse (Blade Type) (10A/32V) (FU1),
Cover Block ....................................................................
3-3. CD Mechanism Deck (MG-101CF-188) ........................
3-4. Sub Panel Complete Assy ...............................................
3-5. Connection Cable (Automobile) ( ) (CNC1) ................
3-6. MAIN Board ...................................................................
3-7. Antenna BT (BT1) ..........................................................
3
18
18
19
20
20
21
21
4.
TEST MODE ............................................................ 21
5.
DIAGRAMS
5-1. Block Diagram - SERVO/BT/USB Section - .................
5-2. Block Diagram - MAIN Section -...................................
5-3. Block Diagram
- PANEL/POWER SUPPLY Section - ............................
5-4. Printed Wiring Boards - MAIN Section (1/2) - ..............
5-5. Printed Wiring Boards - MAIN Section (2/2) - ..............
5-6. Schematic Diagram - MAIN Section (1/4) - ...................
5-7. Schematic Diagram - MAIN Section (2/4) - ...................
5-8. Schematic Diagram - MAIN Section (3/4) - ...................
5-9. Schematic Diagram - MAIN Section (4/4) - ...................
6.
22
23
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference generated by
the charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
Never look into the laser diode emission from right above when
checking it for adjustment. It is feared that you will lose your sight.
If the optical pick-up block is defective, please replace the whole
optical pick-up block.
Never turn the semi-fixed resistor located at the side of optical
pick-up block.
optical pick-up
24
26
27
28
29
30
31
EXPLODED VIEWS
6-1. Sub Panel Section ........................................................... 41
6-2. Chassis Section ............................................................... 42
7.
ELECTRICAL PARTS LIST .............................. 43
Accessories are given in the last of the electrical parts list.
semi-fixed resistor
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
3
MEX-M70BT
DESTINATION SETTING METHOD
When the complete MAIN board or IC502 on the MAIN board is
replaced, the destination setting is necessary.
1-3. Entering the Destination Code
• Method of operation by main unit
1. Destination Setting
Set destination according to the procedure below.
1-1. Setting the Destination Code
1. In the state of source off (the clock is displayed), enter the test
mode by pressing the buttons in order of the [ 4] t [MIC
5] t [PAUSE 6] (press only the [PAUSE 6] button for two
seconds).
2. In the state in which the software main version is displayed on
the liquid crystal display (refer to following figure), enter the
destination setting mode by pressing the buttons in order of the
[> M SEEK+] t [SEEK– m .] t [PUSH ENTER/
VOICE/ APP].
(Displayed characters/values in the following figure are example)
Software main version
1. Rotate the control dial, and select the alphanumeric character
of “0 to F”.
2. The digit advances by pressing the [PUSH ENTER/VOICE/
APP] or [> M SEEK+] button.
The digit returns by pressing the [MODE ] or [SEEK– m
.] button.
3. The setting is completed by pressing the [PUSH ENTER/
VOICE/ APP] button, and the initialization operation is done.
•
Method of operation by remote commander
3. Input the alphanumeric character of 12 digits of “F XXXXXX”
displayed on the liquid crystal display, and execute the destination setting.
Note: Refer to following “1-3. Entering the Destination Code” for operation method.
4. The resetting operation is executed by pressing the [ OFF
SRC] button for 1 second after the setting ends, and the unit
returns to the normal condition.
1-2. Display in Destination Setting Mode
(Displayed characters/values in the following figure are example)
Destination code
OP5 OP4 OP3 OP2 OP1 OP0
12 digits
4
1. Press the [V] or [v] button, and select the alphanumeric character of “0 to F”.
2. The digit advances by pressing the [b] button.
The digit returns by pressing the [B] button.
3. The setting is completed by pressing the [ENTER] button, and
the initialization operation is done.
– Continued on next page –
MEX-M70BT
Ver. 1.2
1-4. Destination Code
OP5
F
OP4
2
OP3
4
OP2
2
OP1
E
OP0
0
2. Confirmation After Destination Setting
Execute the following operation after completing the destination
setting, and confirm a correct destination was set.
Destination setting checking method:
1. In the state of source off (the clock is displayed on the liquid
crystal display), enter the test mode by pressing the buttons in
order of the [ 4] t [MIC 5] t [PAUSE 6] (press only the
[PAUSE 6] button for two seconds).
2. In the state in which the software main version is displayed
on the liquid crystal display (refer to following figure), enter
the destination setting value display mode by pressing the [
DSPL MENU] button twice.
(Displayed characters/values in the following figure are example)
Software main version
3. Confirm the alphanumeric character of 12 digits in liquid crystal display is a value correctly input.
(Displayed characters/values in the following figure are example)
Destination code
OP5 OP4 OP3 OP2 OP1 OP0
12 digits
4. The resetting operation is executed by pressing the [ OFF
SRC] button for 1 second after the confirming ends, and the
unit returns to the normal condition.
TEST DISCS
Use following TEST DISC (for CD) when this unit confirms the
operation and checks it.
Part No.
Description
3-702-101-01
4-225-203-01
DISC (YEDS-18), TEST
DISC (PATD-012), TEST
NOTE OF REPLACING THE KEY BOARD
When the KEY board is defective, replace the FRONT PANEL
(SV) (ASSY) (Ref. No. FP1).
NOTE OF REPLACING THE IC804 AND IC1002 ON
THE MAIN BOARD
IC804 and IC1002 on the MAIN board cannot replace with single.
When these parts are damaged, replace the complete mounted
board.
IMPORTANT NOTE OF “INITIALIZING”
The purpose of “Bluetooth Initialize” is to initialize the Bluetooth
connection history (HF/Audio Streaming). (To delete the device
information for the devices that you connected to when searching,
etc.)
When complete MAIN board is replaced, it is necessary to initialize this unit.
Refer to the following, initialize this unit.
Note: Phonebook data and dialed/received call history can be deleted by
executing “Bluetooth Initialize”.
Procedure:
1. In the state of source off (the clock is displayed), press the [
DSPL MENU] button.
2. Rotate the control dial, and select the “SET BT”.
3. Press the [PUSH ENTER/VOICE/ APP] button.
4. Rotate the control dial, and select the “SET BT INIT”.
5. Press the [PUSH ENTER/VOICE/ APP] button, and the message “SET INIT-NO” is displayed on the liquid crystal display.
6. Rotate the control dial clockwise, and the message “SET INITYES” is displayed on the liquid crystal display.
7. Press the [PUSH ENTER/VOICE/ APP] button, and the message “INITIAL” is blinked on the liquid crystal display.
8. When “Bluetooth Initialize” is completed, the message
“COMPLETE” is displayed on the liquid crystal display for a
moment.
9. Press the [MODE ] button, and return to the state of source
off (the clock is displayed) mode.
5
MEX-M70BT
OPERATION CHECK OF THE NFC AFTER COMPLETING THE REPAIRS
After completing the repairs of this unit, follow the procedure below
to check normal operation of the NFC.
Note: After checking of NFC operation, be sure to delete the pairing information before returning this unit to the customer.
REPLACING THE LITHIUM BATTERY OF THE REMOTE
COMMANDER
When the battery becomes weak, the range of the
remote commander becomes shorter. Replace the
battery with a new CR2025 lithium battery. Use of
any other battery may present a risk of fire or
explosion.
Connecting with a Smartphone by One
touch (NFC)
+ side up
By touching the control dial on the unit with an
NFC* compatible smartphone, the unit is paired and
connected with the smartphone automatically.
* NFC (Near Field Communication) is a technology
enabling short-range wireless communication
between various devices, such as mobile phones and
IC tags. Thanks to the NFC function, data
communication can be achieved easily just by
touching the relevant symbol or designated location
on NFC compatible devices.
For a smartphone with Android OS 4.0 or lower
installed, downloading the app “NFC Easy Connect”
available at Google Play™ is required. The app may
not be downloadable in some countries/regions.
1
Activate the NFC function on the
smartphone.
For details, refer to the operating instructions
supplied with the smartphone.
2
Touch the N-Mark part of the unit with
the N-Mark part of the smartphone.
Notes on the lithium battery
ˎ Keep the lithium battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
ˎ Wipe the battery with a dry cloth to assure a good
contact.
ˎ Be sure to observe the correct polarity when installing
the battery.
ˎ Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble, or dispose of in
fire.
CLEANING THE CONNECTORS
The unit may not function properly if the
connectors between the unit and the front panel
are not clean. In order to prevent this, detach the
and clean
theclean
connectors
with
front panel (page
8) and
the connectors
with
a cotton swab. Do not apply too much force.
Otherwise, the connectors may be damaged.
Make sure that
unit.
lights up on the display of the
To disconnect by One touch
Touch the N-Mark part of the unit with the N-Mark
part of the smartphone again.
Notes
ˎ When making the connection, handle the
smartphone carefully to prevent scratches.
ˎ One touch connection is not possible when the unit is
already connected to another NFC compatible device.
In this case, disconnect the other device, and make
connection with the smartphone again.
Notes
ˎ For safety, turn off the ignition before cleaning the
connectors, and remove the key from the ignition
switch.
ˎ Never touch the connectors directly with your fingers
or with any metal device.
CANCELING THE DEMO MODE
You can cancel the demonstration display which
appears while this unit is turned off.
1
Press MENU, rotate the control dial to
select [DISPLAY], then press it.
2
Rotate the control dial to select [DEMO],
then press it.
3
Rotate the control dial to select [DEMOOFF], then press it.
The setting is complete.
4
Press
(back) twice.
The display returns to normal reception/play
mode.
6
MEX-M70BT
BLUETOOTH FUNCTION CHECKING METHOD USING
A CELLULAR PHONE
1. Required Equipment
• This unit to be tested, external microphone of attachment if necessary
• Cellular phone (Recommended SEMC W880 or W910i, or select from connectable cellular phones list)
• Bluetooth audio devices (SONY NWZ-A826, or select from
connectable cellular phones/audio devices list)
• Speaker connection (at least Front L/R ch)
• DC power supply (12 V)
2. Preparation
• Confirm the setting of this unit and note down it.
• Press the [CALL ] button and rotate the control dial until
“SET PAIRING” appears, then press it, confirm that the Bluetooth signal icon ( ) is flashing.
• Turn on the Bluetooth function of the cellular phone.
3. Test Environment
• No other Bluetooth device is making a communication in the
periphery (within 20 m).
• No other this unit are supplied with electric power.
• There are no two or more wireless LAN access points in the
periphery (with 50 m) (one is OK).
• The set should be tested in a place such as a meeting room, free
from ambient noise.
• The speaker at the far end should be in a place such as another
meeting room separated acoustically.
4. Setting
Install this unit on the desktop.
Approx. 50 cm
Speaker
Unit
6. Bluetooth Phone (Hands Free) Function Check
Note: Depending on the connecting device, Signal-strength/Battery-remaining indications might not be displayed.
Or, depending on the connecting device, the levels of indications are
shown incorrectly.
Even if you see no indications or wrong indications, they are not failures of this unit.
1. Search for this unit from the Bluetooth device (cellular phone),
and confirm whether this unit (“Sony Car Audio”) is displayed.
2. Search for the distance of this unit and the Bluetooth device
(cellular phone) about 5 m apart.
Confirm whether the Bluetooth device (or this unit) is displayed after it searches.
3. Do the pairing of the cellular phone and this unit (input of
passkey).
4. Connect the cellular phone with this unit, and confirm the
“HF” icon ( ) lights.
5. Confirm the connection continues even if the distance of the
cellular phone and this unit is separated by about 5 m.
6. Set this unit besides the “BT PHONE” source, and call the cellular phone connected with this unit.
Confirm the automatic change of this unit into “BT PHONE”
source, and the change into the screen for incoming calls.
Confirm the ring tone is heard from the front speaker.
7. Take a phone call (press the [CALL ] button), and start a
conversation.
Confirm the other person voice is heard from the speaker.
Speak toward the microphone of this unit, and confirm whether the other party hears its voice (At the external microphone
noncontact).
Compare the sound quality with a normal set. Confirm that
there is no big difference.
8. Speak toward an external microphone at the following condition, and confirm the other party hears its voice.
• An external microphone is connected.
9. Turn on ACC from off, and confirm whether this unit connects
Bluetooth with the cellular phone again.
Note: Depending on the cellular phone, it might not reconnect automatically when ACC is turned on.
7. Bluetooth Audio Function Check
Approx. 80 cm
Note: Depending on the connecting BT Audio device, track information
(e.g. track name, playback time) can be on display.
If the device doesn’t support AVRCP1.3, or, if AVRCP1.3 feature of
the device has not been validated with this unit;
the track information won't be shown.
Even if there is no track information on display during playback of
an AVRCP1.3 device, it is not a failure of this unit.
Tester
5. Precautions
Beware of the following points when conducting the
talking test:
• There is no fault if a talking can be made by adjusting appropriately the volume of the telephone of the other party and the
cellular phone connected through the Bluetooth, besides the
setup of this unit.
• The speaker’s voice will become loud naturally if the periphery is noisy, or become low if quiet (even though the speaker
intents to talk on the same volume level).
• The speaker’s voice will become loud naturally if the other
party’s voice is loud.
1. Connect the Bluetooth audio device (or cellular phone with
Bluetooth audio function) with this unit, and confirm the “Audio Streaming” icon ( ) lights.
2. Playback Bluetooth audio. Confirm the sound is emitted from
this unit when this unit is switched to “Bluetooth Audio”
source.
3. Confirm whether Bluetooth audio can be controlled by operating this unit (the [> M SEEK+], [SEEK– m .] and
[PAUSE 6] buttons operation).
Note: Varies depending on the connected Bluetooth audio device.
8. What to Do after Checking
• After checking, select “SET BT INIT” from the menu list of
this unit to execute initialization.
(Connected device information is deleted)
7
MEX-M70BT
Ver. 1.3
BLUETOOTH INFORMATION WRITING METHOD
When the complete MAIN board, knob (VOL) (SV) assy or front
panel (SV) (assy) is replaced, the writing of Bluetooth information
is necessary.
Write the Bluetooth information according to the procedure below.
Preparation:
• Windows PC
• NFC compatible smartphone that installed the file manager application (ASTRO File Manager, File Expert, etc.)
• USB cable for the smartphone
• NFCtagWriter.apk (ver.1.0.2 and above)
Note 1: The NFCtagWriter.apk is updated. When the NFCtagWriter.apk
is prepared already, be sure to refer to the “6. Version Check
Method of the NFC Tag Data Writing Application for the Servicing” on the page 12, and check the version of NFCtagWriter.apk.
Note 2: Confirm the method of obtaining the NFCtagWriter.apk to the
service headquarters.
1. Installing the NFC Writing Application for the Servicing
Install the NFCtagWriter.apk on the smartphone for writing of
Bluetooth information.
9. Refer to the “6. Version Check Method of the NFC Tag Data
Writing Application for the Servicing” on the page 12, and
check the version of NFCtagWriter.apk.
ver.0.9.0
: The use is not allowed.
Install the NFCtagWriter.apk of ver.1.0.2
and above.
ver.1.0.2 and above : The use is allowed.
2. Writing the NFC Tag Data
Write the NFC tag data (Bluetooth information) to the NFC module in the knob (VOL) (SV) assy.
Procedure:
1. Check the Bluetooth address (BD_ADDR).
There are following two checking methods.
• How to read from the BT module label
• How to display on the liquid crystal display by the test mode
How to read from the BT module label:
Set the unit to the state where the BT module (Ref. No. IC1002
on the MAIN board) can be seen.
(Refer to the “3. DISASSEMBLY” on the page 18 and after)
– MAIN board top view –
Procedure:
1. Prepare the NFCtagWriter.apk file on the PC.
2. Connect the smartphone to the PC with the USB cable.
3. Transfer the NFCtagWriter.apk to the smartphone.
4. When tapping the “Settings” → “Security” on the screen of the
smartphone, check the box “Unknown sources”.
BD_ADDR
(Barcode)
5. Disconnect the smartphone from the PC.
6. Use the file manager application to explore the NFCtagWriter.
apk on the smartphone.
7. Click on the NFCtagWriter.apk to open it, and install the
NFCtagWriter.apk to the smartphone.
8. When tapping the “Settings” → “Security” on the screen of the
smartphone, uncheck the box “Unknown sources”.
– Screen after the installation
for reference –
8
Movies
Settings
WALKMAN
Album
YouTube
Media Player
Play Store
Camera
Chrome
NFCtagWriter
Maps
Browser
NFCtagWriter
application
48D2242F241A
BD_ADDR
BT module label
– Continued on next page –
MEX-M70BT
Ver. 1.3
How to display on the liquid crystal display by the
test mode:
1. In the state of source off (the clock is displayed on the
liquid crystal display), enter the test mode by pressing the
buttons in order of the [ 4] t [MIC 5] t [PAUSE 6]
(press only the [PAUSE 6] button for two seconds).
6. Input the Bluetooth address (BD_ADDR).
(Input the Bluetooth address (BD_ADDR) that written on the
BT module label with the keyboard on the smartphone, or tap
the “QR” on the screen of the smartphone and read the barcode
with the camera of the smartphone)
Software main version
Sony Car Audio
2. In the state in which the software main version is displayed
on the liquid crystal display, enter the Bluetooth address
(BD_ADDR) display mode by pressing the [ DSPL
MENU] button.
(Displayed characters/values in the following figure are
example)
Bluetooth Device Addres
Bluetooth address (BD_ADDR)
7. Tap the “Write” on the screen of the smartphone, in the state
that unchecked the box “Read-only”.
Note 1: When pressing the [ DSPL MENU] button again, the destination code is displayed on the liquid crystal display, but it is
not necessary to display in this step.
3. The resetting operation is executed by pressing the [ OFF
SRC] button for 1 second after the confirming ends, and
the unit returns to the normal condition.
Sony Car Audio
2. Turn on the NFC function of the smartphone.
3. Start the NFCtagWriter application on the smartphone.
4. Tap the “Write” on the screen of the smartphone.
48D2242F241A
8. Touch the N-mark part of the smartphone to the N-mark part of
the unit.
5. Input the Bluetooth Local Name (BL_NAME).
(Input the “Sony Car Audio” with the keyboard on the smartphone, or tap the “List” on the screen of the smartphone and
select the “Sony Car Audio”)
9
Check that “Completed!” is displayed on the screen of the
smartphone.
Note 2: When “Completed!” is not displayed on the screen of the smartphone, refer to “3. Error Display” on the page 10.
Bluetooth Local Name
Bluetooth Device Addres
– Continued on next page –
9
MEX-M70BT
Ver. 1.3
10. End the NFCtagWriter application on the smartphone.
11. Check the operation of connecting with the smartphone by one
touch (NFC).
(Refer to the “OPERATION CHECK OF THE NFC AFTER
COMPLETING THE REPAIRS” on the page 6)
12. Start the NFCtagWriter application on the smartphone.
13. Tap the “Write” on the screen of the smartphone.
17. Tap the “Read” on the screen of the smartphone.
18. Check that “BD_ADDR” on the screen of the smartphone accords with BD_ADDR written on the BT module label and
“MODE” on the screen of the smartphone is “00 00 (Readonly)”.
14. Check the box “Read-only” on the screen of the smartphone,
and tap the “Write” on the screen of the smartphone.
Sony Car Audio
48D2242F241A
15. Touch the N-mark part of the smartphone to the N-mark part of
the unit.
19. End the NFCtagWriter application on the smartphone.
20. Check the operation of connecting with the smartphone by one
touch (NFC).
(Refer to the “OPERATION CHECK OF THE NFC AFTER
COMPLETING THE REPAIRS” on the page 6)
3. Error Display
When the writing of the NFC tag data has failed, “Error” is displayed on the screen of the smartphone.
When “Error” is displayed on the screen of the smartphone, operate according to the procedure below.
16. Check that “Completed!” is displayed on the screen of the
smartphone.
Note 3: When “Completed!” is not displayed on the screen of the smartphone, refer to “3. Error Display”.
Procedure:
1. Tap the “Write” on the screen of the smartphone to write of the
NFC tag data again.
2. When “Error” is displayed on the screen of the smartphone
again, tap the “Read” on the screen of the smartphone.
3. Check that “MODE” on the screen of the smartphone is not
“00 00 (Read-only)”.
4. When “MODE” on the screen of the smartphone is “00 00
(Read-only)”, execute the writing of the NFC tag data again
after replacing the knob (VOL) (SV) assy.
(When “MODE” on the screen of the smartphone is “00 00
(Read-only)”, the writing of the NFC tag data cannot execute)
10
MEX-M70BT
Ver. 1.3
4. Check Method of the NFC Tag Data
Check the NFC tag data according to the procedure below.
2. Turn on the NFC function of the smartphone.
3. Start the NFCtagWriter application on the smartphone.
4. Tap the “Read” on the screen of the smartphone.
Procedure:
1. Check the Bluetooth address (BD_ADDR).
There are following two checking methods.
• How to read from the BT module label
• How to display on the liquid crystal display by the test mode
How to read from the BT module label:
Set the unit to the state where the BT module (Ref. No. IC1002
on the MAIN board) can be seen.
(Refer to the “3. DISASSEMBLY” on the page 18 and after)
– MAIN board top view –
5. Check that “BD_ADDR” on the screen of the smartphone accords with BD_ADDR written on the BT module label and
“MODE” on the screen of the smartphone is “00 00 (Readonly)”.
BD_ADDR
(Barcode)
6. End the NFCtagWriter application on the smartphone.
48D2242F241A
BD_ADDR
BT module label
How to display on the liquid crystal display by the
test mode:
1. In the state of source off (the clock is displayed on the
liquid crystal display), enter the test mode by pressing the
buttons in order of the [ 4] t [MIC 5] t [PAUSE 6]
(press only the [PAUSE 6] button for two seconds).
Software main version
2. In the state in which the software main version is displayed
on the liquid crystal display, enter the Bluetooth address
(BD_ADDR) display mode by pressing the [ DSPL
MENU] button.
(Displayed characters/values in the following figure are
example)
Bluetooth address (BD_ADDR)
Note: When pressing the [ DSPL MENU] button again, the destination code is displayed on the liquid crystal display, but it is not
necessary to display in this step.
3. The resetting operation is executed by pressing the [ OFF
SRC] button for 1 second after the confirming ends, and
the unit returns to the normal condition.
11
MEX-M70BT
Ver. 1.3
5. The Factor that One Touch Connection is Impossible
The four following factors are considered as the factor that one touch connection is impossible.
Guess and check the defective factor by each checking result.
Note: The four following factors are examples.
Factor
1 BT module defect
Knob (VOL) (SV)
2
assy defect
NFC tag data
3
writing failure
4 Smartphone
Bluetooth manual connection check by user
NG
NFC tag data check
―
Bluetooth manual connec- NFC one touch connection
tion check by servicing
check with smartphone
NG
NG
OK
NG
OK
NG
OK
NG
OK
NG
OK
OK
OK
NG
6. Version Check Method of the NFC Tag Data Writing
Application for the Servicing
Check the version of the NFC tag data writing application
(NFCtagWriter application) for the servicing according to the
procedure below.
Procedure:
1. Start the NFCtagWriter application on the smartphone.
2. Tap the “ ” (menu button) or “ ” of the screen of the smartphone, then tap the “About” that is displayed on the screen of
the smartphone.
AFFIXING OF LABEL (SERIAL NUMBER)
When the front panel (SV) (assy) is replaced, it is necessary to affix the label (serial number).
2 labels (serial number) are included with a new front panel (SV)
(assy). Affix 1 label to the rear side of the front panel (SV) (assy).
Affix the other one to the bottom side of main unit.
Be sure to perform this procedure, as Bluetooth will not operate
correctly if the serial number of the front panel (SV) (assy) and
main unit do not match.
Also, since the serial number has changed, print page 13 and hand
the tear-off with the product to the customer when returning the
product after repairs are complete.
or
label (serial number)
– Front panel (SV) (assy) rear view –
label (serial number)
3. Check that version of the NFC tag data writing application for
the servicing is displayed on the screen of the smartphone.
– Main unit bottom view –
ver.0.9.0
The use is not allowed
(Use the ver.1.0.2 and above)
12
ver.1.0.2
The use is allowed
MEX-M70BT
• Please cut out along the dotted line and use it.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
Notice about the serial number change on the back side of
the front panel:
The serial number on the back of the front panel has changed due to
repairs.
For details, refer to the “Detaching the Front Panel” section of “Getting
Started” in the instruction manual.
13
MEX-M70BT
MEMO
14
MEX-M70BT
Ver. 1.3
SERVICE POSITION
Note: The length of cable flexible flat (27 core) has been changed from 150 mm to 80
mm in the midway of production.
When the length of cable flexible flat (27 core) is 80 mm, cannot performing the
operation check in the state that is removed the CD mechanism deck from the
main unit. When performing the operation check, use following flexible flat cable.
Part No.
Descrimination
1-846-819-31 CABLE FLEXIBLE FLAT (27 CORE) (Length: 150 mm)
OK
OK
CD mechanism deck
CD mechanism deck
insulating sheet
insulating sheet
stand
stand
cable flexible flat (27 core)
Note: Do not cable flexible flat (27 core) is
damaged by the edge of the chassis.
main unit
main unit
NG
NG
CD mechanism deck
Note: CD mechanical deck should
not be placed vertically.
cable flexible flat (27 core)
cable flexible flat (27 core)
Note: Do not cable flexible flat (27 core) is
damaged by the edge of the chassis.
main unit
CD mechanism deck
Note: CD mechanical deck should
not be placed vertically.
main unit
cable flexible flat (27 core)
NG
CD mechanism deck
Note: CD mechanical deck should
not be placed upside down.
cable flexible flat (27 core)
main unit
15
MEX-M70BT
SECTION 2
GENERAL
This section is extracted
from instruction manual.
A
Smartphone, iPod/iPhone, USB device
Téléphone intelligent, iPod/iPhone, périphérique USB
Teléfono inteligente, iPod/iPhone, dispositivo USB
Ferrite sleeve
Gaine en ferrite
Casquillo de ferrita
*1
Smartphone*6, iPod/iPhone*7, USB
device
Téléphone intelligent*6, iPod/
iPhone*7, périphérique USB
Teléfono inteligente*6, iPod/
iPhone*7, dispositivo USB
Equipment used in illustrations (not supplied)
Appareils utilisés dans les illustrations (non fournis)
Equipo utilizado en las ilustraciones (no
suministrado)
*9
*9
Front speaker
Haut-parleur avant
Altavoz frontal
Subwoofer
Caisson de graves
Altavoz potenciador de graves
*9
Satellite radio tuner (SiriusXM)*3
Syntoniseur radio satellite
(SiriusXM)*3
Sintonizador de radio por satélite
(SiriusXM)*3
Fuse (10 A)
Fusible (10 A)
Fusible (10 A)
*1
B
*9
Rear speaker
Haut-parleur arrière
Altavoz posterior
RM-X11M
*8
from boat antenna (aerial)
à partir de l’antenne
du bateau
desde la antena del barco
Satellite radio tuner (SiriusXM)*1
Syntoniseur radio satellite (SiriusXM)*1
Sintonizador de radio por satélite (SiriusXM)*1
ʛ*
4
*1 RCA pin cord (not supplied).
*2 Separate adaptor may be required.
*3 not supplied
*4 For details on installing the microphone, see “Installing the microphone (˳)” on the
reverse side.
*5 Whether in use or not, route the microphone input cord such that it does not interfere
with driving. Secure the cord with a clamp, etc., if it is installed around your feet.
*6 To connect a smartphone to the main unit, an appropriate cable (not supplied) is
required.
*7 To connect an iPod/iPhone, use the USB connection cable for iPod (not supplied).
*8 Supplied with the marine remote commander.
*9 not waterproof
*10Speaker impedance: 4 – 8 ohms × 4
Blue/white striped
Rayé bleu/blanc
Con rayas azules y blancas
REM OUT
*2
Marine remote commander
Télécommande marine
Mando a distancia subacuático
ʔ
C
Max. supply current 0.4 A
Courant max. fourni 0,4 A
Corriente máx. de alimentación de 0,4 A
White
Blanc
Blanco
Left
Gauche
Izquierdo
White/black striped
Rayé blanc/noir
Con rayas blancas y negras
Gray
Gris
Gris
Right
Droit
Derecho
*10
Left
Gauche
Izquierdo
Right
Droit
Derecho
Black
Noir
Negro
Orange/white striped
Rayé orange/blanc
Con rayas naranjas/blancas
Gray/black striped
Rayé gris/noir
Con rayas grises y negras
Green
Vert
Verde
Red
Rouge
Rojo
Green/black striped
Rayé vert/noir
Con rayas verdes y negras
Purple
Violet
Morado
Yellow
Jaune
Amarillo
ILLUMINATION
ACC
BATTERY
Purple/black striped
Rayé violet/noir
Con rayas moradas y negras
English
Cautions
Be sure to install this unit in the dashboard of the
boat as the rear side of the unit becomes hot
during use.
ˎThis unit is designed for negative ground (earth) 12 V
DC operation only.
ˎDo not get the leads under a screw, or caught in
moving parts (e.g. seat railing).
ˎBefore making connections, turn the boat’s ignition
off to avoid short circuits.
ˎConnect the yellow and red power supply leads
only after all other leads have been connected.
ˎRun all ground (earth) leads to a common ground
(earth) point.
ˎBe sure to insulate any loose unconnected leads
with electrical tape for safety.
ˎUnder the environment of potential water splash,
Sony highly recommends to protect the unit with
Waterproof Car Stereo Cover (not supplied).
While an iPod or USB device is connected, the
Waterproof Car Stereo Cover cannot be fully closed.
Avoid splashing water on the unit.
ˎThe use of optical instruments with this product will
increase eye hazard.
Notes on the power supply lead (yellow)
ˎWhen connecting this unit in combination with other
stereo components, the connected boat circuit’s
rating must be higher than the sum of each
component’s fuse.
ˎWhen no boat circuits are rated high enough,
connect the unit directly to the battery.
Connection example ( )
Subwoofer Easy Connection (ǵ-C)
You can use a subwoofer without a power amplifier
when it is connected to a rear speaker cord.
*1 not supplied (ǵ-B)
*2 Do not connect a speaker in this connection (ǵ-C).
Notes
ˎBe sure to connect the ground (earth) lead before connecting the
amplifier (ǵ-A).
ˎThe alarm will only sound if the built-in amplifier is used (ǵ-A).
ˎBe sure to connect a 4 - 8 ohm subwoofer. Do not connect a
speaker to the other rear speaker cord (ǵ-C).
16
Power amplifier
Amplificateur de puissance
Amplificador de potencia
Connection diagram ( )
ɞ To battery or distribution block ground
First connect the black ground (earth) lead, then connect the
yellow and red power supply leads.
ɟ To the power antenna (aerial) control lead or
power supply lead of antenna (aerial) booster
Notes
ˎIt is not necessary to connect this lead if there is no power
antenna (aerial) or antenna (aerial) booster, or with a
manually-operated telescopic antenna (aerial).
ˎWhen your boat has a built-in FM/AM antenna (aerial) in the
rear/side glass, see “Notes on the control and power supply
leads.”
To AMP REMOTE IN of an optional power
amplifier
This connection is only for amplifiers and a power antenna
(aerial). Connecting any other system may damage the unit.
ɠ To a boat’s illumination signal
Be sure to connect the black ground (earth) lead to the battery
or distribution block ground first.
ɡ To the +12 V power terminal which is energized
in the accessory position of the ignition switch
Notes
ˎIf there is no accessory position, connect to the +12 V power
(battery) terminal which is energized at all times.
Be sure to connect the black ground (earth) lead to the battery
or distribution block ground first.
ˎWhen your boat has a built-in FM/AM antenna (aerial) in the
rear/side glass, see “Notes on the control and power supply
leads.”
ɢ To the +12 V power terminal which is energized
at all times
Be sure to connect the black ground (earth) lead to the battery
or distribution block ground first.
Notes on the control and power supply leads
ˎREM OUT lead (blue/white striped) supplies +12 V DC when you turn
on the unit.
ˎWhen your boat has built-in FM/AM antenna (aerial) in the rear/
side glass, connect REM OUT lead (blue/white striped) or the
accessory power supply lead (red) to the power terminal of the
existing antenna (aerial) booster. For details, consult your dealer.
ˎA power antenna (aerial) without a relay box cannot be used with
this unit.
Memory hold connection
When the yellow power supply lead is connected, power will always
be supplied to the memory circuit even when the ignition switch is
turned off.
Notes on speaker connection
ˎBefore connecting the speakers, turn the unit off.
ˎUse speakers with an impedance of 4 to 8 ohms, and with
adequate power handling capacities to avoid its damage.
ˎDo not connect the speaker terminals to the boat chassis, or
connect the terminals of the right speakers with those of the left
speaker.
ˎDo not connect the ground (earth) lead of this unit to the negative
(–) terminal of the speaker.
ˎDo not attempt to connect the speakers in parallel.
ˎConnect only passive speakers. Connecting active speakers (with
built-in amplifiers) to the speaker terminals may damage the unit.
ˎTo avoid a malfunction, do not use the built-in speaker leads
installed in your boat if the unit shares a common negative (–) lead
for the right and left speakers.
ˎDo not connect the unit’s speaker leads to each other.
Français
Mises en garde
Installez cet appareil sur le tableau de bord du
bateau, car l’arrière de l’appareil chauffe en cours
d’utilisation.
ˎCet appareil est exclusivement conçu pour
fonctionner sur une tension de 12 V CC avec masse
négative.
ˎÉvitez de fixer des vis sur les câbles ou de coincer
ceux-ci dans des pièces mobiles (par exemple,
armature de siège).
ˎAvant d’effectuer les raccordements, coupez le
contact du bateau pour éviter les courts-circuits.
ˎRaccordez les câbles d’alimentation jaune et rouge
seulement après avoir terminé tous les autres
raccordements.
ˎRassemblez tous les câbles de mise à la masse en
un point de masse commun.
ˎPour des raisons de sécurité, veillez à isoler avec du
ruban isolant tout câble libre non raccordé.
ˎSi l’appareil risque d’être exposé à des
éclaboussures d’eau, Sony recommande fortement
de le protéger avec une housse imperméable pour
chaîne stéréo de voiture (non fournie).
Lorsqu’un iPod ou un périphérique USB est raccordé,
la housse imperméable pour chaîne stéréo de
voiture ne peut pas se fermer complètement. Évitez
d’exposer l’appareil à des éclaboussures d’eau.
ˎL’utilisation d’instruments optiques avec ce produit
augmente les risques pour les yeux.
Remarques sur le câble d’alimentation (jaune)
ˎLorsque cet appareil est raccordé à d’autres
éléments stéréo, la valeur nominale du circuit du
bateau raccordé doit être supérieure à la somme des
fusibles de chaque élément.
ˎSi aucun circuit du bateau n’est assez puissant,
raccordez directement l’appareil à la batterie.
Exemple de raccordement ( )
Raccordement facile d’un caisson de graves (ǵ-C)
Vous pouvez utiliser un caisson de graves sans
amplificateur de puissance lorsque vous effectuez le
raccordement à un cordon de haut-parleur arrière.
*1 non fourni (ǵ-B)
*2 Ne raccordez pas un haut-parleur avec cette connexion (ǵ-C).
Remarques
ˎRaccordez d’abord le câble de mise à la masse avant de raccorder
l’amplificateur (ǵ-A).
ˎL’alarme est émise uniquement lorsque l’amplificateur intégré est
utilisé (ǵ-A).
ˎAssurez-vous de raccorder un caisson de graves de 4 - 8 ohms. Ne
raccordez pas de haut-parleur à l’autre cordon de haut-parleur
arrière (ǵ-C).
Schéma de raccordement ( )
Español
*1 Cordon à broche RCA (non fourni).
*2 L’utilisation d’un adaptateur pourrait être nécessaire.
*3 non fourni
*4 Pour les détails sur l’installation du microphone, référez-vous à « Installation du
microphone (Ǽ) » au verso.
*5 Qu’il soit en usage ou non, acheminez le cordon d’entrée du microphone de telle sorte
qu’il ne gêne pas votre conduite. Fixez le cordon à l’aide d’une attache, etc., s’il est
installé autour de vos pieds.
*6 Pour raccorder un téléphone intelligent à l’appareil principal, un câble approprié (non
fourni) est requis.
*7 Pour raccorder un iPod/iPhone, utilisez le câble de raccordement USB pour iPod (non
fourni).
*8 Fourni avec la télécommande marine.
*9 non étanche
*10Impédance des haut-parleurs : 4 – 8 ohms × 4
*1 Cable con terminales RCA (no suministrado).
*2 Puede requerirse un adaptador independiente.
*3 no suministrado
*4 Para obtener detalles sobre la instalación del micrófono, consulte “Instalación del
micrófono (Ǽ)” al reverso.
*5 Se esté utilizando o no, coloque el cable de entrada del micrófono de modo que no
interfiera en el manejo del automóvil. Si instala los cables cerca de la zona de los pies,
fíjelos con una abrazadera, etc.
*6 Para conectar un teléfono inteligente a la unidad principal, es necesario utilizar un
cable adecuado (no suministrado).
*7 Para conectar un iPod/iPhone, use el cable de conexión USB para iPod (no
suministrado).
*8 Suministrado con el mando a distancia subacuático.
*9 no es resistente al agua
*10Impedancia del altavoz: 4 – 8 Ω × 4
Diagrama de conexión ( )
ɞ Vers la batterie ou le répartiteur de terre
Precauciones
ɞ A la conexión a masa de la batería o del bloque
ɟ Au câble de commande d’antenne électrique ou
Asegúrese de instalar la unidad en el tablero del
barco, ya que la parte posterior de la unidad se
calienta durante el uso.
ɟ Al cable de control de la antena motorizada o al
Branchez d’abord le câble de mise à la masse noir et, ensuite, les
câbles d’alimentation jaune et rouge.
au câble d’alimentation de l’amplificateur
d’antenne
Remarques
ˎIl n’est pas nécessaire de raccorder ce câble s’il n’y a pas
d’antenne électrique ni d’amplificateur d’antenne, ou avec une
antenne télescopique manuelle.
ˎSi votre bateau est équipé d’une antenne FM/AM intégrée
dans la vitre arrière/latérale, voir « Remarques sur les câbles de
commande et d’alimentation ».
Au niveau de AMP REMOTE IN de l’amplificateur
de puissance en option
Ce raccordement s’applique uniquement aux amplificateurs et à
une antenne électrique. Le branchement de tout autre système
risque d’endommager l’appareil.
ɠ Vers le connecteur du signal d’éclairage du
bateau
Commencez par raccorder le câble de mise à la masse noir à la
batterie ou au répartiteur de terre.
ɡ À la borne d’alimentation +12 V qui est
alimentée quand la clé de contact est sur la
position accessoires
Remarques
ˎS’il n’y a pas de position accessoires, raccordez la borne
d’alimentation (batterie) +12 V qui est alimentée en
permanence.
Commencez par raccorder le câble de mise à la masse noir à la
batterie ou au répartiteur de terre.
ˎSi votre bateau est équipé d’une antenne FM/AM intégrée
dans la vitre arrière/latérale, voir « Remarques sur les câbles de
commande et d’alimentation ».
ɢ À la borne d’alimentation +12 V qui est
alimentée en permanence
Commencez par raccorder le câble de mise à la masse noir à la
batterie ou au répartiteur de terre.
Remarques sur les câbles de commande et d’alimentation
ˎLe câble REM OUT (rayé bleu/blanc) fournit une alimentation de
+12 V CC lorsque vous mettez l’appareil en marche.
ˎLorsque votre bateau est équipé d’une antenne FM/AM intégrée
dans la vitre arrière/latérale, raccordez le câble REM OUT (rayé
bleu/blanc) ou le câble d’alimentation des accessoires (rouge) à la
borne d’alimentation de l’amplificateur d’antenne existant. Pour
plus de détails, consultez votre détaillant.
ˎUne antenne électrique sans boîtier de relais ne peut pas être
utilisée avec cet appareil.
Raccordement pour la conservation de la mémoire
Lorsque le câble d’alimentation jaune est raccordé, le circuit de la
mémoire est alimenté en permanence même si la clé de contact est
sur la position d’arrêt.
Remarques sur le raccordement des haut-parleurs
ˎAvant de raccorder les haut-parleurs, éteignez l'appareil.
ˎUtilisez des haut-parleurs ayant une impédance de 4 à 8 ohms avec
une capacité électrique adéquate pour éviter de les endommager.
ˎNe raccordez pas les bornes du système de haut-parleurs au
châssis du bateau et ne raccordez pas les bornes du haut-parleur
droit à celles du haut-parleur gauche.
ˎNe raccordez pas le câble de mise à la masse de cet appareil à la
borne négative (–) du haut-parleur.
ˎN’essayez pas de raccorder les haut-parleurs en parallèle.
ˎRaccordez uniquement des haut-parleurs passifs. Le raccordement
de haut-parleurs actifs (avec amplificateurs intégrés) aux bornes
des haut-parleurs peut endommager l’appareil.
ˎPour éviter tout problème de fonctionnement, n’utilisez pas les
câbles des haut-parleurs intégrés installés dans votre bateau si
l’appareil possède un câble négatif commun (–) pour les
haut-parleurs droit et gauche.
ˎNe raccordez pas entre eux les câbles des haut-parleurs de
l’appareil.
ˎEsta unidad ha sido diseñada para alimentarse sólo
con cc de 12 V de masa negativa.
ˎNo coloque los cables debajo de ningún tornillo, ni
los aprisione con partes móviles (p. ej. los rieles del
asiento).
ˎAntes de realizar las conexiones, desactive el
encendido del barco para evitar cortocircuitos.
ˎConecte los cables de fuente de alimentación
amarillo y rojo solamente después de haber
conectado los demás.
ˎConecte todos los cables de conexión a masa a un
punto común.
ˎPor razones de seguridad, asegúrese de aislar con
cinta aislante los cables sueltos que no estén
conectados.
ˎEn caso de riesgo accidental de salpicaduras de
agua, Sony recomienda encarecidamente proteger
la unidad con una Cubierta resistente al agua para el
reproductor estéreo (no suministrado).
Mientras el iPod o el dispositivo USB está conectado,
la Cubierta resistente al agua para el reproductor
estéreo no puede cerrarse por completo. Evite tirar
agua sobre la unidad.
ˎEl uso de instrumentos ópticos con este producto
aumenta el riesgo de sufrir daños oculares.
Notas sobre el cable de fuente de alimentación
(amarillo)
ˎCuando conecte esta unidad en combinación con
otros componentes estéreo, la capacidad nominal
del circuito conectado del barco debe ser superior a
la suma del fusible de cada componente.
ˎSi no hay circuitos del barco con capacidad nominal
suficientemente alta, conecte la unidad
directamente a la batería.
Ejemplo de conexiones ( )
Conexión sencilla del altavoz potenciador de graves
(ǵ-C)
Cuando el altavoz potenciador de graves está
conectado al cable de altavoz posterior, puede usarlo
sin un amplificador de potencia.
*1 no suministrado (ǵ-B)
*2 No conecte un altavoz a esta conexión (ǵ-C).
Notas
ˎAsegúrese de conectar primero el cable de conexión a masa antes
de realizar la conexión del amplificador (ǵ-A).
ˎLa alarma sonará únicamente si se utiliza el amplificador
incorporado (ǵ-A).
ˎAsegúrese de conectar un altavoz potenciador de graves de 4 a
8 Ω. No conecte un altavoz al otro cable de altavoz posterior (ǵ-C).
de distribución
Conecte primero el cable de conexión a masa negro, y después
los cables amarillo y rojo de fuente de alimentación.
cable de fuente de alimentación del
amplificador de señal de la antena
Notas
ˎSi no se dispone de antena motorizada ni de amplificador de
señal de la antena, o se utiliza una antena telescópica
accionada manualmente, no será necesario conectar este
cable.
ˎSi el barco tiene una antena de FM/AM incorporada en el
cristal trasero o lateral, consulte “Notas sobre los cables de
control y de fuente de alimentación”.
A AMP REMOTE IN de un amplificador de
potencia opcional
Esta conexión es sólo para amplificadores y una antena
motorizada. La conexión de cualquier otro sistema puede dañar
la unidad.
ɠ Una señal de iluminación del bote
Asegúrese de conectar primero el cable de conexión a masa
negro a la batería o a la toma a masa del bloque de distribución.
ɡ Al terminal de alimentación de +12 V que recibe
energía en la posición de accesorio del
interruptor de encendido
Notas
ˎSi no hay posición de accesorio, conéctelo al terminal de
alimentación (batería) de +12 V que recibe energía sin
interrupción.
Asegúrese de conectar primero el cable de conexión a masa
negro a la batería o a la toma a masa del bloque de
distribución.
ˎSi el barco tiene una antena de FM/AM incorporada en el
cristal trasero o lateral, consulte “Notas sobre los cables de
control y de fuente de alimentación”.
ɢ Al terminal de alimentación de +12 V que recibe
energía sin interrupción
Asegúrese de conectar primero el cable de conexión a masa
negro a la batería o a la toma a masa del bloque de distribución.
Notas sobre los cables de control y de fuente de alimentación
ˎEl cable REM OUT (rayado azul y blanco) suministra cc de +12 V al
encender la unidad.
ˎSi el barco tiene una antena FM/AM integrada en el cristal posterior
o lateral, conecte el cable REM OUT (rayado azul y blanco) o el cable
de fuente de alimentación auxiliar (rojo) al terminal de alimentación
del amplificador de señal de la antena existente. Para obtener más
detalles, consulte a su distribuidor.
ˎCon esta unidad no es posible utilizar una antena motorizada sin
caja de relé.
Conexión para protección de la memoria
Si conecta el cable de fuente de alimentación amarillo, el circuito de
la memoria recibirá siempre alimentación, aunque apague el
interruptor de encendido.
Notas sobre la conexión de los altavoces
ˎAntes de conectar los altavoces, desconecte la alimentación de la
unidad.
ˎUtilice altavoces con una impedancia de 4 a 8 Ω, con la capacidad
de potencia adecuada para evitar que se dañen.
ˎNo conecte los terminales de altavoz al chasis del barco, ni conecte
los terminales del altavoz derecho con los del izquierdo.
ˎNo conecte el cable de conexión a masa de esta unidad al terminal
negativo (–) del altavoz.
ˎNo intente conectar los altavoces en paralelo.
ˎConecte solamente altavoces pasivos. Si conecta altavoces activos
(con amplificadores incorporados) a los terminales de altavoz,
puede dañar la unidad.
ˎPara evitar fallas de funcionamiento, no utilice los cables de altavoz
incorporados instalados en el barco si la unidad comparte un cable
negativo común (–) para los altavoces derecho e izquierdo.
ˎNo conecte los cables de altavoz de la unidad entre sí.
MEX-M70BT
English
1
Unit: mm (in)
Unité : mm (po)
Unidad: mm
1
182 (7 1/4)
53 (2 1/8)
ʖ
Catch
Loquet
Enganche
ʓ
q
Mounting angle adjustment
2
Français
Precautions
ˎChoose the installation location carefully so that the
unit will not interfere with normal boating or car
driving operations.
ˎAvoid installing the unit in areas subject to dust, dirt,
excessive vibration, or high temperatures, such as in
direct sunlight or near heater ducts.
ˎSelect carefully the mounting location to avoid
internal damage by water entering the unit. Areas
subject to water splashes should be avoided. The
Waterproof Car Stereo Cover (not supplied) is
recommended.
ˎUse only the supplied mounting hardware for a safe
and secure installation.
Adjust the mounting angle to less than 45°.
Removing the protection collar
and the bracket ( )
Remove the protection collar ʖ.
Pinch both edges of the protection collar ʖ, then
pull it out.
2
Remove the bracket ʓ.
ɞ Insert both release keys ʕ together between
the unit and the bracket ʓ until they click.
ɟ Pull down the bracket ʓ, then pull up the unit
to separate.
Claws
Griffes
Uñas
2
3
Inner console panel
Panneau de console interne
Panel interno de la consola
ʕ
q
ʙ*
ʓ
q
ʚ
ʖ
ʓ
* Max. size M4 × 6 mm (1/4 in)
Dimension max. M4 × 6 mm (1/4 po)
Tamaño máx. M4 × 6 mm
Face the hook inwards.
Tournez le crochet vers
l’intérieur.
Gire el gancho hacia la
parte interior
Mounting example ( )
Notes
ˎBefore installing, make sure that the catches on both sides of the
bracket ʓ are bent inwards 2 mm (3/32 in). If the catches are straight
or bent outwards, the unit will not be installed securely and may
spring out (Ǹ-1).
ˎBend these claws outward for a tight fit, if necessary (Ǹ-2).
ˎMake sure that the 4 catches on the protection collar ʖ are
properly engaged in the slots of the unit (Ǹ-3).
Mounting the unit in a Japanese
car ( )
You may not be able to install this unit in some makes
of Japanese cars. In such a case, consult your Sony
dealer.
Note
To prevent malfunction, install only with the supplied screws ʗ.
How to detach and attach the
front panel ( )
A
TOYOTA
Before detaching the front panel, be sure to press and
hold OFF. Press the front panel release button, and
pull it off towards you.
A
ʗ
Ǻ-B To attach
size
5 × max. 8 mm
(7/32 × max. 5/16 in)
dimension
5 × max. 8 mm
(7/32 × 5/16 po max.)
tamaño
5 × 8 mm máx.
to dashboard/center console
vers le tableau de bord/la console centrale
al salpicadero o consola central
Warning if your boat’s ignition
has no ACC position
size
5 × max. 8 mm
(7/32 × max. 5/ 16 in)
dimension
5 × max. 8 mm
(7/32 × 5/ 16 po max.)
tamaño
5 × 8 mm máx.
Bracket
Support
Soporte
Engage part ʭ of the front panel with part ʮ of the
unit, as illustrated, and push the left side into position
until it clicks.
Be sure to set the Auto Off function. For details, see
the supplied Operating Instructions.
The unit will shut off completely and automatically in
the set time after the unit is turned off, which prevents
battery drain.
If you do not set the Auto Off function, press and hold
OFF until the display disappears each time you turn
the ignition off.
ʗ
Bracket
Support
Soporte
OFF
Fuse replacement ( )
B
Existing parts supplied with your car
Pièces existantes fournies avec la voiture
Piezas existentes suministradas con su automóvil
B
Front panel release button
Touche de déverrouillage de
la façade
Botón de liberación del panel
frontal
When replacing the fuse, be sure to use one matching
the amperage rating stated on the original fuse. If the
fuse blows, check the power connection and replace
the fuse. If the fuse blows again after replacement,
there may be an internal malfunction. In such a case,
consult your nearest Sony dealer.
NISSAN
Installing the microphone
( )
ʗ
size
5 × max. 8 mm
(7/32 × max. 5/16 in)
dimension
5 × max. 8 mm
(7/32 × 5/16 po max.)
tamaño
5 × 8 mm máx.
ʗ
Bracket
Support
Soporte
size
5 × max. 8 mm
(7/32 × max. 5/ 16 in)
dimension
5 × max. 8 mm
(7/32 × 5/ 16 po max.)
tamaño
5 × 8 mm máx.
Bracket
Support
Soporte
Existing parts supplied with your car
Pièces existantes fournies avec la voiture
Piezas existentes suministradas con su automóvil
q
to dashboard/center console
vers le tableau de bord/la console centrale
al salpicadero o consola central
Installing on the dashboard
To capture your voice during handsfree calling, you
need to install the microphone ͮ.
The microphone is not waterproof. Select a location
for the microphone which is dry and protected from
water; for example, near the windshield.
Install a clip (not supplied) and adjust the length and
position of the cord so that it does not obstruct your
driving.
Cautions
ˎKeep the microphone away from extremely high
temperatures and humidity.
ˎIt is extremely dangerous if the cord becomes
wound around the steering column or gear stick. Be
sure to keep it and other parts from obstructing your
driving.
ˎIf airbags or any other shock-absorbing equipment
is in your boat, contact the store where you
purchased this unit, or the boat dealer, before
installation.
Notes
ˎBefore attaching the double-sided tape , clean the
surface of the dashboard with a dry cloth.
ˎAdjust the microphone angle to the proper position.
Notes on the tuning step
Fuse (10 A)
Fusible (10 A)
Fusible (10 A)
ˎFor how to set the tuning step, see the supplied
Operating Instructions.
ˎIf replacing the boat battery or changing the
connections, the tuning step setting will be erased.
Extracción del marco de
protección y del soporte ( )
Retrait du tour de protection et
du support ( )
Avant d’installer l’appareil, retirez le tour de
protection ʖ et le support ʓ de l’appareil.
Retirez le tour de protection ʖ.
Pincez les deux bords du tour de protection ʖ, puis
sortez-le.
1
2
Retirez le support ʓ.
ɞ Insérez les clés de déblocage ʕ en même
temps entre l’appareil et le support ʓ jusqu’au
déclic.
ɟ Tirez le support ʓ vers le bas, puis tirez sur
l’appareil vers le haut pour les séparer.
Exemple de montage ( )
Installation dans l’orifice prédécoupé sur le bateau
Remarques
ˎAvant l’installation, assurez-vous que les loquets des deux côtés du
support ʓ sont bien pliés de 2 mm (3/32 po) vers l’intérieur. Si les
loquets sont droits ou pliés vers l’extérieur, l’appareil ne peut pas
être fixé solidement et peut se détacher (Ǹ-1).
ˎSi nécessaire, pliez ces griffes vers l’extérieur pour assurer une prise
correcte (Ǹ-2).
ˎAssurez-vous que les 4 loquets situés sur le tour de protection ʖ
sont correctement engagés dans les fentes de l’appareil (Ǹ-3).
Montage de l’appareil dans une
voiture japonaise ( )
Cet appareil ne peut pas être installé dans certaines
voitures japonaises. Consultez, dans ce cas, votre
détaillant Sony.
Remarque
Pour éviter tout problème de fonctionnement, utilisez uniquement
les vis ʗ fournies pour le montage.
Before installing the unit, detach the front panel.
Ǻ-A To detach
Ajuste el ángulo de montaje a menos de 45°.
Réglez l’inclinaison à un angle inférieur à 45°.
Installation in the cutout hole on boat
ʘ
Precauciones
ˎElija cuidadosamente el lugar de montaje de forma
que la unidad no interfiera con las funciones
normales de conducción del automóvil o del barco.
ˎEvite instalar la unidad donde pueda quedar
expuesta a polvo, suciedad, vibraciones excesivas o
altas temperaturas, por ejemplo, a la luz solar directa
o cerca de conductos de calefacción.
ˎSeleccione cuidadosamente el lugar de montaje
para evitar que el agua provoque daños internos.
Deben evitarse las zonas expuestas a salpicaduras
de agua. Se recomienda utilizar la cubierta resistente
al agua para el reproductor estéreo para
automóviles (no suministrada).
ˎPara realizar una instalación segura y firme, utilice
solamente elementos de instalación suministrados.
Ajuste del ángulo de montaje
Réglage de l’angle de montage
Before installing the unit, remove the protection
collar ʖ and the bracket ʓ from the unit.
1
Español
Précautions
ˎChoisissez soigneusement l’emplacement
d’installation pour que l’appareil ne gêne pas la
conduite du bateau ou de la voiture.
ˎÉvitez d’installer l’appareil dans un endroit exposé à
la poussière, à la saleté, à des vibrations excessives
ou à des températures élevées comme en plein
soleil ou à proximité de conduits de chauffage.
ˎSélectionnez soigneusement l’emplacement
d’installation afin d’éviter que l’eau ne pénètre à
l’intérieur de l’appareil et n’entraîne des problèmes
de fonctionnement. Évitez les zones sujettes aux
projections d’eau. L’utilisation de la housse
imperméable pour chaîne stéréo de voiture (non
fournie) est recommandée.
ˎPour garantir un montage sûr, n’utilisez que le
matériel fourni.
Retrait et fixation de la façade
( )
Antes de instalar la unidad, retire el marco de
protección ʖ y el soporte ʓ de la misma.
1
Retire el marco de protección ʖ.
Apriete ambos bordes del marco de protección ʖ y,
a continuación, tire de él hacia fuera.
2
Retire el soporte ʓ.
ɞ Inserte ambas llaves de liberación ʕ entre la
unidad y el soporte ʓ hasta que encajen.
ɟ Presione el soporte ʓ y, a continuación, levante
la unidad para separar ambos elementos.
Ejemplo de montaje ( )
Instalación en el orificio de corte del barco
Notas
ˎAntes de instalar la unidad, compruebe que los enganches de
ambos lados del soporte ʓ estén doblados hacia adentro 2 mm. Si
no lo están o están doblados hacia afuera, la unidad no se instalará
correctamente y puede saltar (Ǹ-1).
ˎSi es necesario, doble las uñas hacia fuera para que encaje
firmemente (Ǹ-2).
ˎCompruebe que los 4 enganches del marco de protección ʖ estén
bien fijados en las ranuras de la unidad (Ǹ-3).
Montaje de la unidad en un
automóvil japonés ( )
Es posible que no pueda instalar esta unidad en
algunos automóviles japoneses. En tal caso, consulte
a su distribuidor Sony.
Nota
Para evitar que se produzcan fallas de funcionamiento, realice la
instalación solamente con los tornillos suministrados ʗ.
Forma de extraer e instalar el
panel frontal ( )
Antes de instalar la unidad, extraiga el panel
frontal.
Avant d’installer l’appareil, retirez la façade.
Ǻ-A Pour la retirer
Avant de retirer la façade, n’oubliez pas de maintenir
enfoncée la touche OFF. Appuyez sur la touche de
déverrouillage de la façade, puis faites glisser la
façade vers vous.
Ǻ-B Pour la fixer
Engagez la partie ʭ de la façade dans la partie ʮ de
l’appareil, comme illustré, puis appuyez sur le côté
gauche jusqu’au déclic indiquant que la façade est en
position.
Avertissement si le contact de
votre bateau ne comporte pas de
position ACC
Veillez à régler la fonction Auto Off. Pour obtenir
davantage d’informations, reportez-vous au mode
d’emploi fourni.
L’appareil s’éteint complètement et automatiquement
après le laps de temps choisi une fois l’appareil arrêté
afin d’éviter que la batterie ne se décharge.
Si vous ne réglez pas la fonction Auto Off, appuyez sur
la touche OFF et maintenez-la enfoncée jusqu’à ce
que l’affichage disparaisse à chaque fois que vous
coupez le contact.
Remplacement du fusible ( )
Lorsque vous remplacez le fusible, veillez à utiliser un
fusible dont l’intensité, en ampères, correspond à la
valeur indiquée sur le fusible usagé. Si le fusible grille,
vérifiez le branchement de l’alimentation et remplacez
le fusible. Si le nouveau fusible grille également, il est
possible que l’appareil soit défectueux. Dans ce cas,
consultez votre détaillant Sony le plus proche.
Installation du microphone
( )
Fixation sur le tableau de bord
Pour capturer votre voix durant les appels mains
libres, vous devez installer le microphone ͮ.
Le microphone n’est pas étanche. Choisissez un
endroit sec et à l’abri de l’eau pour le microphone; par
exemple, près du pare-brise.
Installez un clip (non fourni) et ajustez la longueur et
la position du cordon de façon à ce qu’il ne gêne pas
la conduite.
Mises en garde
ˎN’exposez pas le microphone à des températures
extrêmement élevées et à l’humidité.
ˎVeillez à ce que le cordon ne soit pas enroulé autour
du volant ou du levier de vitesses. Ceci peut s’avérer
extrêmement dangereux. Veillez à ce que le cordon
et les autres pièces ne gênent pas votre conduite.
ˎSi un système de coussins de sécurité gonflables ou
tout autre équipement absorbant les chocs est
présent dans votre bateau, contactez le magasin où
vous avez acheté cet appareil ou votre
concessionnaire avant l’installation.
Remarques
ˎAvant de fixer l’adhésif double face , nettoyez la
surface du tableau de bord avec un chiffon sec.
ˎRéglez l’angle du microphone afin de le positionner
correctement.
Remarques sur l’intervalle de
syntonisation
ˎPour savoir comment régler l’intervalle de
syntonisation, consultez le mode d’emploi fourni.
ˎSi vous remplacez la batterie du bateau ou modifiez
les raccordements, le réglage de l’intervalle de
syntonisation sera effacé.
Ǻ-A Para extraerlo
Antes de extraer el panel frontal, asegúrese de
mantener presionado OFF. Presione el botón de
liberación del panel frontal y extraiga el panel frontal
hacia usted.
Ǻ-B Para instalarlo
Coloque la parte ʭ del panel frontal en la parte ʮ de
la unidad, como se muestra en la ilustración, y
después presione la parte izquierda hasta que encaje.
Advertencia: si el encendido del
barco no dispone de una posición
ACC
Asegúrese de ajustar la función de desconexión
automática. Para obtener más información, consulte el
manual de instrucciones suministrado.
La unidad se apagará completa y automáticamente en
el tiempo establecido después de que se desconecte
la unidad, lo que evita que se desgaste la batería.
Si no ha ajustado la función de desconexión
automática, mantenga presionado OFF cada vez que
apague el interruptor de encendido, hasta que la
pantalla desaparezca.
Sustitución del fusible ( )
Al sustituir el fusible, asegúrese de utilizar uno cuyo
amperaje coincida con el especificado en el original. Si
el fusible se funde, verifique la conexión de
alimentación y sustitúyalo. Si el fusible vuelve a
fundirse después de sustituirlo, es posible que exista
alguna falla de funcionamiento interno. En tal caso,
consulte con el distribuidor Sony más cercano.
Instalación del micrófono
( )
Instalación en el salpicadero
Para capturar la voz durante llamadas con manos
libres, debe instalar el micrófono ͮ.
El micrófono no es resistente al agua. Seleccione un
lugar para el micrófono que esté seco y protegido del
agua, por ejemplo, cerca del parabrisas.
Instale un clip (no suministrado) y ajuste la longitud y
la posición del cable de modo que no obstruya la
conducción.
Precauciones
ˎMantenga el micrófono alejado de lugares con
humedad y temperaturas muy altas.
ˎQue el cable se enrolle alrededor del volante o de la
palanca de cambios es extremadamente peligroso.
Asegúrese de impedir que el cable y otros
componentes obstruyan la conducción.
ˎSi el bote dispone de airbags u otros dispositivos de
amortiguación de impactos, póngase en contacto
con el establecimiento donde ha adquirido esta
unidad o con el distribuidor de embarcaciones antes
de llevar a cabo la instalación.
Notas
ˎAntes de colocar la cinta adhesiva de doble cara ,
limpie la superficie del tablero con un paño seco.
ˎAjuste el ángulo del micrófono en la posición
adecuada.
Notas acerca de la sintonización
ˎPara obtener información sobre cómo ajustar la
sintonización, consulte el manual de instrucciones
suministrado.
ˎSi se reemplaza la batería del barco o se cambian las
conexiones, la configuración de la sintonización se
borrará.
Clip (not supplied)
Clip (non fourni)
Clip (no suministrado)
17
MEX-M70BT
SECTION 3
DISASSEMBLY
•
This set can be disassembled in the order shown below.
3-1.
DISASSEMBLY FLOW
SET
FRONT PANEL SECTION
Note: Illustration of disassembly is omitted.
3-2. MINI FUSE (BLADE TYPE) (10A/32V) (FU1),
COVER BLOCK
(Page 18)
3-3. CD MECHANISM DECK (MG-101CF-188)
(Page 19)
3-4. SUB PANEL COMPLETE ASSY
(Page 20)
3-5. CONNECTION CABLE (AUTOMOBILE) (
(Page 20)
) (CNC1)
3-7. ANTENNA BT (BT1)
(Page 21)
3-6. MAIN BOARD
(Page 21)
Note: Follow the disassembly procedure in the numerical order given.
3-2.
MINI FUSE (BLADE TYPE) (10A/32V) (FU1), COVER BLOCK
4 cover block
Note: When installing the cover, check
that four bosses are all locked.
OK
2 two bosses
Boss is locked.
NG
3 three claws
2 two bosses
Boss is unlocked.
1 mini fuse (blade type) (10A/32V)
(FU1)
18
MEX-M70BT
Ver. 1.3
3-3.
CD MECHANISM DECK (MG-101CF-188)
Note 1: The service manual of the mechanism deck, used in this model has been issued in a separate volume. Please refer to the
service manual of the MG-101 series for the mechanism deck
information.
Note 2: When installing the CD mechanism block,
align the rib and the slot.
6 bracket (CD)
5 two screws
(PTT2.6 u 4)
Note 2: When installing the CD mechanism block,
align the rib and the slot.
7 CD mechanism deck
(MG-101CF-188)
4 cable flexible flat (27 core)
(Length: 150 mm) (FFC1)
(CN401) (See Note 4)
1 screw
(PTT2.6 u 6)
2 Remove the CD mechanism block
in the direction of the arrow.
slot
slot
1 two screws
(PTT2.6 u 6)
3 connector
(CN701)
1 screw
(PTT2.6 u 6)
‡+RZWRLQVWDOOWKH&'PHFKDQLVPGHFN
Note 4: The length of cable flexible flat (27 core) (FFC1) has been changed from 150 mm to 80 mm in the midway of production.
When the length of cable flexible flat (27 core) (FFC1) is 80 mm, install the CD mechanism deck in the following procedures.
CD mechanism deck
(MG-101CF-188)
2 cable flexible flat (27 core)
(Length: 80 mm)
(FFC1) (CN701)
3
1 cable flexible flat (27 core)
(Length: 80 mm)
(FFC1) (CN401)
Note 3: When installing the cable flexible flat (27 core) (FFC1), insert straight to the connector and lock a connector completely.
No slanting after insertion.
OK
Insert is straight to the interior.
cable flexible flat
(27 core) (FFC1)
connector
NG
Connector is unlock.
cable flexible flat
(27 core) (FFC1)
connector
NG
Insert is incline
cable flexible flat
(27 core) (FFC1)
connector
NG
Insert is shallow
cable flexible flat
(27 core) (FFC1)
connector
19
MEX-M70BT
Ver. 1.1
3-4.
SUB PANEL COMPLETE ASSY
1 filament tape
‡:LUHVHWWLQJ
MAIN board
connector
(CN1004)
3 two claws
lead wire from
microphone
filament tape
hole
hole
3 two claws
rib
rib
2 connector (CN1004)
4 sub panel complete assy
Note: When installing the sub panel complete assy,
align two ribs and two holes.
3-5.
front side
CONNECTION CABLE (AUTOMOBILE) ( ) (CNC1)
Note 1: When the complete MAIN board is replaced, it is necessary to replace knob (VOL) (SV) assy simultaneously. Also, the destination
setting, Bluetooth operation check and Bluetooth information writing is necessary. Refer to “DESTINATION SETTING METHOD”
on page 4, “BLUETOOTH FUNCTION CHECKING METHOD
USING A CELLULAR PHONE” on page 7 and “BLUETOOTH
INFORMATION WRITING METHOD” on page 8.
5 connection cable (automobile) (
(CNC1)
Note 2: REGULATOR board has been deleted in the midway of production.
For details, please refer to service manual supplement-1.
4 screw
(PTT2.6 u 8)
1 filament
tape
3 connector
(CN1300)
‡:LUHVHWWLQJ
lead pin lead pin
2 Remove the cable
from lead pin.
Note 3: Connection cable (automobile) do not
touch with REGULATOR board.
MAIN board
connector
(CN1300)
REGULATOR
front side
board
20
filament tape
lead pin
2 Remove the cable
from two lead pins.
)
MEX-M70BT
Ver. 1.1
3-6.
MAIN BOARD
3 ground point screw
(PTT2.6 u 6)
3-7.
ANTENNA BT (BT1)
4 screw
(PTT2.6 u 8)
3 lead wire with connector
(CN1002)
3 two ground point screws
(PTT2.6 u 6)
2 filament
tape
2 connector
(CN1300)
4 screw
(PTT2.6 u 8)
‡:LUHVHWWLQJ
lead wire from antenna BT
MAIN
connector
board connector
(CN1002)
(CN1300)
‡:LUHVHWWLQJ
connector
(CN1002)
lead wire from antenna BT
MAIN board
antenna BT
front side
6 Remove the
MAIN board block
in the direction
of the arrow.
5 claw
4 screw (T)
1 Remove the cable
from lead pin.
5 antenna BT
(BT1)
OK
lead wire with connector
connector
NG
lead wire with connector
connector
1 lead wire with connector
(CN1002)
5 claw
7 Remove the
solder.
[black]
SECTION 4
TEST MODE
connector
SETTING THE TEST MODE
‡:LUHVHWWLQJ
C848
7 Remove the
solder. 9 filament
[red]
tape
[black]
MAIN board
Setting method:
1. In the state of source off (the clock is displayed), enter the test
mode by pressing the buttons in order of the [ 4] t [MIC
5] t [V ALBUM 1] (press only the [V ALBUM 1] button for
two seconds).
2. It is set to the test mode, and all segments of the liquid crystal
display light.
[red]
C848
7 Remove the
solder.
[blue]
C501
[blue]
Releasing method:
Press the [ OFF SRC] button for 1 second.
C501
MICROPHONE AUDIO LOOPBACK
To confirm the state of the external microphone used when a
handsfree function is used, the microphone audio is output from
the speaker.
The breakdown judgment of the microphone can be done without
connecting H/F with the cellular phone.
filament
tape
8 REGULATOR board block
0 MAIN board
REGULATOR
board
front side
filament tape
Procedure:
1. Enter the test mode.
2. Press the [ OFF SRC] button to select the Bluetooth Phone
function.
3. On/off of the microphone audio loopback function changes
whenever the [ALBUM v 2] button is pressed (“ ” is displayed on the liquid crystal display).
Note: REGULATOR board has been deleted in the midway of production.
For details, please refer to service manual supplement-1.
LOOPBACK
MEX-M70BT
NG
lead wire with connector
antenna BT
front side
OK
lead wire with connector
lead pin
21
21
ON
Lit
OFF
None
connector
MEX-M70BT
SECTION 5
DIAGRAMS
5-1.
BLOCK DIAGRAM - SERVO/BT/USB Section -
CD MECHANISM
DECK BLOCK
(MG-101CF-188)
A
18 FPI1
C
17 FPI2
DAO2 (F_R-CH) 54
16 FNI1
DAO4 (R_L-CH) 59
B
22 VRO
PD
24 MDI
AUTOMATIC
POWER CONTROL
Q701
AU_IN_LCH,
AU_IN_RCH
AU_IN_LCH
C
(Page
23)
AU_IN_RCH
XO 67
X701
16.9344MHz
LRCK_OUT
LRCK_IN_R
DEC_INT
DEC_XMUTE
SP_DATA
SP_CLK
CD_BUS2
CD_BUS3
CD_BUCK
CD_XCCE
ZDET
/SRAMSTB
/RST
XI 66
BSIF_GATE
BSIF_INT
SDIN_R
SDOUT_CH0
BCK_OUT
BCK_IN_R
FOO
TRO
FMO
DMO
SUB
ADIN2 (IN_R-CH) 74
BSIF_DATA
BCK_IN_F
LRCK_IN_F
31
32
34
35
R-CH
ADIN1 (IN_L-CH) 70
25 LDO
FOCUS
TRACK
SL
SP
B
(Page
23)
RL
DAO1 (R_R-CH) 52
RF AMP,
DIGITAL SERVO PROCESSOR,
AUDIO DSP
IC705
FL, RL, SUB
R-CH
DAO5 (SUB-CH) 61
20 TPI
21 TNI
1/2VCC
FL
DAO3 (F_L-CH) 57
15 FNI2
F
E
LD
27 RFZI
RFRP 28
90 91 92
89 88 42 45 49 43
48 44 87 93 95 96 79 80 81 82 94 37 85
R-ch is omitted due to same as L-ch.
SIGNAL PATH
: AUDIO
: CD PLAY
BUFFER
IC504
91
30
13 8 6 5 22 20 17 19 10 15 14
AUDIO_X1
DEC_LRCK_IN
DEC_INT
DEC_XMUTE
SP_DATA
SP_CLK
CD_SDI
CD_SDO
CD_BUSCLK
CD_XCCE
CD_ZDET
DSP_SSTBY
DSP_RST
DRV_ON
MEC_LOAD
MEC_EJECT
MEC_LIMIT
MEC_DSW
MEC_INSW
MEC_SELFSW
27 24 26 44 12 16 32 33 29
BSIF_DO
BSIF_BCK
BSIF_LR
LRCK_INT
BSIF_GATE
BSIF_ST_REQ
DEC_SDOUT_F
DEC_SDIN_CH0
DEC_BCK_IN
47
60
41
57
124
51
137
DRV_ON
LOAD
EJECT
L_SW
D_SW
IN_SW
SELF
: USB
: Bluetooth
SERIAL FLASH
IC502
BT1
BT ANTENNA
SF1_D1
SF1_D0
SF1_CLK
SF1_CE
SF1_D2
SF1_D3
IC1002
BT MODULE
PATTERN
ANTENNA
39 RF
PCM2_IN
PCM2_OUT
PCM_CLK
PCM2_SYNC
UART_TX
UART_RX
RESET
25
26
23
24
13
14
12
54
55
52
53
65
133
114
BT_DOUT
BT_DIN
BT_CLK
BT_SYNC
BT_RX
BT_TX
BT_RST
SYSTEM CONTROLLER
IC503 (1/3)
2
5
6
1
3
7
172
170
168
169
166
167
DO
DI
CLK
CS
WP
HOLD
2 SDA
6 SCL
I2C0_SDA 126
I2C0_SCL 125
D501
RESET
EEPROM
IC1009
I2C0_SDA
I2C0_SCL
(Page 24) A
CNC1
4
D+
3
D–
139
71
70
68
67
X1 10
35 DP4
34 DM4
22
22
X501
48MHz
X502
13.333MHz
X503
32.768kHz
I2C0_SDA
I2C0_SCL
140
X1300
30MHz
USB CONTROLLER
IC1301
MEX-M70BT
RTC_X1
X2 11
RTC_X2
151 DP0
150 DM0
EXTAL
DPU 22
DMU 21
XTAL
26 DP1
25 DM1
USB_X1
D+
D–
USB_X2
KEY BOARD (1/3)
(Page
23)
I2C0_SDA, I2C0_SCL
I2C0_SDA, I2C0_SCL
D
E
(Page
24)
MEX-M70BT
5-2.
BLOCK DIAGRAM - MAIN Section INPUT SELECTOR, ELECTRICAL VOLUME
IC402
FL, RL, SUB
B
FL
33 AU_IN_FL
J401
L
AU_OUT_FL 36
FRONT
(Page
22)
R
R-CH
RL
31 AU_IN_RL
L
AU_OUT_RL 38
REAR
R
R-CH
SUB
30 AU_IN_SUB
AU_OUT_SL 40
SUB
AU_OUT_SR 39
KEY BOARD (2/3)
8 AUX_LCH
AUX_L
AUX_GND
R-CH
AUX_R
AU_OUT_LCH 28
AU_OUT_RCH 27
MIC1001
MIC INPUT
SELECTOR
IC1051
MIC AMP
IC1003
1 BUS_LCH
2 BUS_RCH
I2C_SDA 23
I2C_SCL 22
AU_IN_LCH
AU_IN_RCH
I2C0_SDA
I2C0_SCL
AU_IN_LCH,
AU_IN_RCH
(Page 22)
I2C0_SDA,
I2C0_SCL
MUTING
Q404
C
MUTING
Q406
MUTING
Q408
MUTING
Q407
POWER AMP
IC301
6
MUTING
CONTROL
Q401, 402, 808
FL+ 5
R-CH
FL+
12 IN_FL
8
FL– 3
D
FL–
5
FR+
(Page 22)
R-CH
7
FR–
J1001
MIC
2
RL+ 9
AUDIO_OUT_L
AUDIO_OUT_R
RL– 7
5 TU_LCH
R-CH
SDA
SCL
RSTN
RL–
1
RR+
R-CH
3
RR–
16 22 4
R-ch is omitted due to same as L-ch.
SIGNAL PATH
CN801
(SIRIUSXM IN)
: AUDIO
1
: TUNER
11 XM_LCH
: SIRIUSXM
4
R-CH
: AUX
1 BT_MIC_DET
ATT 175
128 I2C1_SDA
127 I2C1_SCL
176 HIT2_RESET
BEEP 28
AMP_ATT 2
AMPSTB 3
: MIC
2
63 XM_RX
6
BUFFER
IC801, 802
10
48 XM_TX
96 XM_PWR
9
4
AC_GND (BEEP)
MUTE
STBY
RF_ANT_IN
J001
(ANTENNA IN)
RL+
11 IN_RL
TU01
TUX-DSP03 (TUNER UNIT)
MEX-M70BT
CN301 (1/2)
F801
VCC
SYSTEM CONTROLLER
IC503 (2/3)
23
23
AUDIO OUT
MEX-M70BT
Ver. 1.1
5-3.
BLOCK DIAGRAM - PANEL/POWER SUPPLY Section RESET
SYSTEM CONTROLLER
IC503 (3/3)
RES 76
+1.2V REGULATOR
IC001 (Former type)
IC805 (New type)
P-COM_1.2V
KEY BOARD (3/3)
40 LCD_DO
35 LCD_CLK
38 LCD_CE
D502
SIRC
KEY_1
KEY_0
RE_1
RE_0
PANEL_SW
BU_3.3V
136 SIRCS
83 KEY_IN1
82 KEY_IN0
49 KEY_ACK1
132 RE_IN1
131 RE_IN0
REGULATOR
IC803
+1.5V
REGULATOR
IC703
BU_1.5V
SDA 7
33 VOUT0
36 SW2
32 VIN1
SCL 8
BT_3.3V
E
(Page
22)
15
TU_5V
13 VOUT3
HSW1 38
VBUS_5V
20 VOUT4
VIN3 15
AU_8.5V
28 VOUT2
REGULATOR
IC401
IC402 B+
I2C0_SCL
VCC
VIN0 43
VIN2 26
VINSW 41
BT_PWR 112
135 DOOR_SW
I2C0_SDA,
I2C0_SCL
I2C0_SDA
CN301 (2/2)
+3.3V
REGULATOR
IC1001
9
AMP_REM
D816
VIN4 16
GATE1
GATE5
LCD_DATA
LCD_CLK
LCD_CE
SYNC
EN
LD4EN
ECO
ERR2
120 RC_IN1
81 RC_IN0
59 KEY_ACK0
J801
(REMOTE IN)
A
(Page
22)
RESET SIGNAL
GENERATOR
IC501
9 2 3 4 6
23 44
USB_ON 118
PWR_ECO 106
USB_OVR 108
DR_1.5V
DR_3.3V
+1.5V
REGULATOR
IC704
+3.3V
REGULATOR
IC702
SERVO_ON 4
+6V
REGULATOR
IC804
DR_6V
B+ SWITCH
Q803
REGULATOR
Q810, 811
D802
POWER
CONTROL
Q801, 802
VBUSIN0 152
REGULATOR
Q805
FP_B+
+3.3V
REGULATOR
IC1302
USB_VBUS
USBIN 7
FLT_USB
EN_USB
5 USBOUT
9 12
USB_OVR2
USB_ON2
SYNC_OUT
EN_SYS
2 LX VIN 3
DC/DC CONVERTER
IC1300
SYNC
EN_SYS
IC1301 +3.3V
8 4
111
110
42
104
VCC
D817
BACK UP
VOLTAGE DETECT
Q812, 814
BU_IN 56
D818
BATTERY
CHECK
Q813
ACCESSORY
CHECK
Q806
ACC_IN 45
DIMMER
DETECT
Q807
ILL_IN 103
13
ACC
D814
11
ILL
Note: Refer to “NEW/FORMER DISCRIMINATION” on page 1 on service
manual supplement-1 for how to distinguish New/Former types.
MEX-M70BT
24
24
MEX-M70BT
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
For Printed Wiring Boards.
For Schematic Diagrams.
Note:
• X : Parts extracted from the component side.
• Y : Parts extracted from the conductor side.
•
f : Internal component.
•
: Pattern from the side which enables seeing.
(The other layers’ patterns are not indicated.)
Note:
• All capacitors are in μF unless otherwise noted. (p: pF) 50
WV or less are not indicated except for electrolytics and
tantalums.
• All resistors are in Ω and 1/4 W or less unless otherwise
specified.
•
f : Internal component.
• C : Panel designation.
Caution:
Pattern face side:
(Conductor Side)
Parts face side:
(Component Side)
Caution:
Pattern face side:
(SIDE B)
Parts face side:
(SIDE A)
Parts on the pattern face side seen
from the pattern face are indicated.
Parts on the parts face side seen from
the parts face are indicated.
Parts on the pattern face side seen
from the pattern face are indicated.
Parts on the parts face side seen from
the parts face are indicated.
• Indication of transistor.
C
Q
These are omitted.
B E
Note: When the complete MAIN board is replaced, it is necessary to replace knob (VOL) (SV) assy simultaneously. Also, the destination setting, Bluetooth operation
check and Bluetooth information writing is necessary.
Refer to “DESTINATION SETTING METHOD” on
page 4, “BLUETOOTH FUNCTION CHECKING
METHOD USING A CELLULAR PHONE” on page
7 and “BLUETOOTH INFORMATION WRITING
METHOD” on page 8.
Note:
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part
number specified.
• Waveforms
– MAIN Board –
1
IC705 rk (LRCK_OUT)
74.8 ns
22.7 Ps
Note:
Les composants identifiés
par une marque 0 sont
critiques pour la sécurité.
Ne les remplacer que par
une pièce portant le numéro spécifié.
1 V/DIV, 10 Ps/DIV
2
• A : B+ Line.
• Power voltages is dc 14.4V and fed with regulated dc
power supply from ACC and BATT cords.
• Voltages and waveforms are dc with respect to ground
under no-signal (detuned) conditions.
no mark : TUNER (FM)
(
): CD PLAY
• Voltages are taken with VOM (Input impedance 10 M).
Voltage variations may be noted due to normal production
tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal production
tolerances.
• Circled numbers refer to waveforms.
• Signal path.
F
: AUDIO
f
: TUNER
h : SIRIUS/XM
J
: CD PLAY
d
: USB
E
: AUX
a : Bluetooth
N
: MIC
IC705 rl (BCK_OUT)
IC503 ua (XTAL)
3.4 Vp-p
3.4 Vp-p
1 V/DIV, 20 ns/DIV
8
IC503 <zv/ (USB_X2)
3.4 Vp-p
352 ns
3
IC705 yj (XO)
3.9 Vp-p
59.2 ns
1 V/DIV, 20 ns/DIV
4
IC1301 qa (X2)
1.3 Vp-p
33.4 ns
500 mV/DIV, 20 ns/DIV
5
IC1300 1 (BST)
15.6 Vp-p
2.6 Ps
5 V/DIV, 2 Ps/DIV
6
IC503 yk (RTC_X2)
1 Vp-p
30.4 Ps
500 mV/DIV, 20 Ps/DIV
25
25
0.7 Vp-p
21.2 ns
1 V/DIV, 200 ns/DIV
Note: When the complete MAIN board is replaced, it is necessary to replace knob (VOL) (SV) assy simultaneously. Also, the destination setting, Bluetooth operation
check and Bluetooth information writing is necessary.
Refer to “DESTINATION SETTING METHOD” on
page 4, “BLUETOOTH FUNCTION CHECKING
METHOD USING A CELLULAR PHONE” on page
7 and “BLUETOOTH INFORMATION WRITING
METHOD” on page 8.
MEX-M70BT
7
200 mV/DIV, 10 ns/DIV
MEX-M70BT
Ver. 1.1
5-4.
PRINTED WIRING BOARDS - MAIN Section (1/2) 1
2
3
•
: Uses unleaded solder.
4
5
6
7
8
9
10
11
A
MAIN BOARD (COMPONENT SIDE)
C310
D805
A
K
C811
R834
C816
5 R831 8 C825
R821
A
K
D809
C832
R836
1
5
R817
R841
3
4
R850
R814 R818
R849
1
JL002
BLU
C003 C002
JL001
R1033
R1031
IC1003
R638
R639
FB505
R1032
R656
C014
L505
C568
R519
R509
132
C511
C507
R534
R660
R535
R560
133
CL530 R558
C503
R1117
A
K
C015
R576
R540
R544
C1016
R1019
R1001
CN1001
(11)
6
REGULATOR BOARD (SIDE B)
11
21
10
R1004
R1005
C1332
C1329
C1322
IC1002
BT MODULE
(WB113C)
R1035
(NC)
R1023 R1025
20
R1011
R1013
11
1-893-423-
8
C536
R583
L502
R525
6
H
C443
C535
(NC)
C559
R566 CL511
R556
BLK
RED
4
R601
R604
R603
C530
C537
MIC1001
CN502
R602
3 R571
27
(CHASSIS)
C567
CL525 R665
CL524
C570
C521
C524
C523
R572
88
R567
1
2 C519
CL521 CL522
89
C517
CL509
C516
R681
R542
R541
CL510
CL508
R548
C508
R545
R731
JL003
R613
R1006
C1334
C1321
C1342
C1336
C1333
C1341
1
R012
1
30
I
R1010
R1012
CN1002
C1353
R1040
CL1332
L1307
5
CL1331
R108
CAM101
CL112
C104
C109
C106
K
CNC1
CN1300
L1303
40
BT1
BT ANTENNA
PATTERN
ANTENNA
L1302
1
31
1
1
R593
R594
4
1
IC001
3
C010
176 CL528
IC503
C09
1
R104
FB101
A001
CD MECHANISM
DECK BLOCK
(MG-101CF-188)
OPTICAL
PICK-UP
BLOCK
(DAX-25A)
R641
C533
C531
R551
G
C549
1
X503
R680
REGULATOR BOARD (SIDE A)
R646
R625
R633
45
R579
IC501
CN701
FFC1
R616
R592 R640
C547
R658
X502
SERVO
BOARD
R632
R627 R635
R651
CL513
R666
SENSOR
BOARD
D1003
2
L501
C705
IC1051
R1052
R552
R703 E
R706
F
44
C564
C719
R712
K
FB02
R619
R650
Q701
R714
C1313
C402
R743
FB501
R637
C504
D502
C1312
IC401
R634
R653
R622
R629
R643
C720
3
1
R21
1
C404
R510
R511
R553
R1358
C747
C502
R1312
R1306
9
IC1300
R557
JL709
C501
C1310
R1309
R1310
4
6
R655
R718 R721
C722 C749
R407
R408
C1317
8
BLU
R1030
4
C1011
C1010
1
C1012
C1013
CN1004
R683
R1333
C723
C729
C846
R1307
C1304
FB404
4
K
C400
1
R416
JL721
C786
R720
4
(CHASSIS)
A D1306
A
5
C407
8
R538
R539
IC804
1
FB703
R719
CL702
8
R1090
C1050
R630
R528
C1316
R722
5
5
C1019 C1014
C1052
R1056
R415
C755
R760
R756
C787
C553
L1301
C759
C446
R412
CL529
GS S S 8
C814
C1318
R1311
16
C772
R513
E Q802
C874
1
R723
R1037
C746
R516
R517
C878
Q803
C442
C748
R741
C781
R745
C845
R808
R809
C1309
C1306
C765
C861
C441
R1036
C1017
C528
A
CAM01
C425
C744
R410
R684
CL507
D802
R1355
R1354
CL703
R420
R404
R411
R715
3 R701
C702 R702
R502
R501
1
C750
C560
C866
C416
C444
R409
R711
R631
R624
C711
R662
R708
IC702
5
4
R512
5
C716
C731
C780
4
R526
C865
L801
E
R307
R318
C318
R319
C319
R320
C321
C320
R322
R309
C324
R305
C316
1
R574
C801
E
C417
C401
C541
E
C867
C410
C409
E R434 R438
R433
C1018
3
C782
DD D D
E
C335
R727
R806
Q801
R812
R890
E R422
C406
D401
C743
RED
R846
K
Q405
E R421
C013
JL820
R840
JL310
Q403
Q404
E
C334
R892
R835
R838
C830
R401
A
R435
C414 R440
C418
C419
R436
R432
Q408
Q407
Q406
C337
IC704
C831
JL823
R413
C336
C411
R417
R742
E
R317
C408
R414
R323
R744
R858
C341
C707
R707
C704
C840
JL308
Q806
C837
C835
C323
JL307
R860
R306
R321
C325
C326
K
R312
C571
C848
A
R861
E
C322
C712
L802
BLK
A
R857
C841
C843
C833
C844
K D813
D811
R888
D814 K
Q807
C317
R878
A
K
R862
R308
R406
R705
FB804
C
D
C314
R304
C343
C342 FB302
C340
C339
R315 R316
C308
C305
C309
C333
C331
C311
C330
C313
C338
JL306
R439
C405
D304
C328
R423
A
IC802
R848
FB803
C803
C804
FB801
FB802
C332
C307 R303
R813
5
F801
C329
C315
C807
R597
R659
1
IC801
4
D808 K
8
A
R829
B
A
(CHASSIS)
D114
C1337
C1339
22
J
C1338
11
1-893-423-
(11)
Note 1: IC804 and IC1002 on the MAIN board cannot replace
with single. When these parts are damaged, replace
the complete mounted board.
MEX-M70BT
1-889-479-
(22)
CL110
26
26
Note 2: The service manual of the mechanism deck, used in this model,
has been issued in a separate volume. Please refer to the service
manual of the MG-101 series for the mechanism deck information.
MEX-M70BT
5-5.
PRINTED WIRING BOARDS - MAIN Section (2/2) 1
2
3
•
: Uses unleaded solder.
4
5
6
7
8
9
10
11
12
MAIN BOARD (CONDUCTOR SIDE)
J401
J1001
REAR
A
SUB
FRONT
L
(FRONT VIEW)
CN301
AUDIO OUT
R
L
1
MIC
FU1
4
R
2
J801
(REMOTE IN)
3
5
8
6
9
7
10
R302
J001
(ANTENNA IN)
PW1
CL301
CL302
CN801
(SIRIUSXM IN)
IC301
B
24
2
25
2
14
1
13
8
9
10
7
1
5
2
6
3
5
6
7
8
9
10
11
12
13
14
15
16
TO
CN301
JL801
1
JL301
C302
E
C525
R505
4
5
24
C1344
FB1300
R1353
L1304
36
JL1300
C1323
C1324
R1316
R1350
4
ACC
GND
BATT
JL802
C809
JL720
C847
A
R805
R863
C828
C818
C821
C839
C819
GS S
Q805
DDD D
R853
K
C876
C306
R851
C875
R852 R854
C817
G
S
S
S
G
R811
D801
A
Q810
Q811
D
D
K
C1303
C1301
C1307
K
R1303
JL713
C717
23
R803
C805
R870
A
R894
R839
C829
R816
22
R1304
C1308
R1301
JL712
C834
C838
C850
R826
C810
R810
D1300
R618
R617
R832
R822
R825
R815
C813
C812
D303
K
R865 C823
R823
C815
R827
R830
C738
JL724
C734
C718
C721
JL719
R726
C761
C760
C758
C768 R740
YEL
ILL
R1300
R1334
JL715
JL716
JL1030
JL805
1-889-479-
JL727
(22)
JL732
JL731
JL1012
3
JL1001
4
R1002
1
5
JL1007
R1015
R1055
R871
R1007 JL1002
C1005
R872
JL1011
CL1001
JL1003
IC1302
5
C1330 C1325
C764
R606
IC10013
JL1008
R1029
48
R1317
I
R1320
C1320
C1009
R1028
C1314
1
IC1301 37
C1006
C1008
X1300
12
25
A
JL1020
C1315
C1328
13
L1305
C1331
R547
R546
R549
D501
JL1019
FB1301
R1313
C1326
R1318
BLK
REM OUT MAX 0.4A
JL701
IC1009
C1327
H
RED
FRONT RCH (–)
JL702
K
R1361
ORG/WHT
FRONT LCH (–)
JL729
C1004
8
BLU/WHT
FRONT RCH (+)
JL733
R520
R522
R521
R1017
1
R591
C512
R1014
R561
R523
R515
R514
C1094
R527
GRY/BLK
FRONT LCH (+)
C509
R524
R506
R578
R503
R504
R559
R529
CL504
CL501
CL502
JL538 JL730
JL710
R554
R563
C505
C510
C506
CL503
G
C540
CL523
C526
C518
WHT/BLK
REAR RCH (–)
22
JL708
JL717
C515
GRY
REAR LCH (–)
JL711
JL707 JL706
JL539
CL519
JL704
JL705
C529
R573
CL518
CL517
R608
R555
R507
JL1018
C522 C527
C520
R565
JL703
R585
R582
5
C569
X501
R598
R605
4
R562
R600
R586
R728
JL714
C827
A C806
D806
A
C872
R833
IC803
C822
FB805
JL718
25
R709
C745
C714
IC504
C532
C539
C538
C566
3
1
CL520
L504
C534
CL535
CL537
C762
C736
C767 FB702
R657 R609
C543
R599
JL540
R568
R623
JL726
JL725
R607
JL723
JL722
C766
WHT
REAR RCH (+)
K
R837
R1359
C735
26
R750
1
R748
C783
C793
C770
C771
R590
K
JL804
JL808
R717
R550
R682
JL526
JL528
CL505
IC502
4
R628
CL536
R626
R642
R649
5
R652
JL529
R612
C548
C544
8
IC705
JL1010
1
IC703
5
C715
C728
CL701
C732
C727
R751 100
C546
R621
R610
R615
C550
JL1016
R611
C551
JL530
1
4
C730
R734
C725
R654
R587 R644
CL512
CL539
R1024
JL527
R533
R648
JL524
FB504
JL525
R614
JL1102
CL02
3
R753
R752
JL534
JL522
JL523
8
C545
CL01
R733
R842
R845
JL806
R704
51
R757
R1003
R647
L01
C754
JL533
JL1014
R11 R02
JL803
R301
R869
JL807
D816
50
C790
C788
E
K
D818
R819
C742
R758 76
R749
JL532
JL531
R10
C05
R725
R737
A
E
C737
R724
R762 R754
JL402
JL01
R09
C756
75
R747
R763
L401
E
C773
R105
C03
C763
R738
R739
C775
VIO/BLK
REAR LCH (+)
L301
44
R856
R868
R807
JL403
C777
C779
CL1000
R103
TU01
TUX-DSP03
(TUNER UNIT)
R735
C751
C769
Q814
C706
C107
C105
C103
R732
X701
C420
C421
C422
R107
C1358
D817
Q812 Q813 A
K
E
C741 C740
C739
20
R437
1
R859
1
R431
R424
1
R310
C415
R761 R755
C423
C424
D1002
C1054
21
IC402
D
A
C412 C413
C445
40
GRN/BLK
D301
R311
R729
R430
R425
R426
R427
R428
R429
JL1021
K
VIO
JL305 JL304
A
JL309
D1001
A
K
GRN
C303
D812
C820
E
A
FB1005
R828
FB1004
Q402
FB1003
K
C
F
JL311 JL303
C304
C301
R1302
Q401
4
4
JL302
E
2
3
15
16
JL401
Q808
1
JL1004
JL1005
R1314
1
JL1006
JL1017
R1021
JL1015
JL1013
R1016
R1020
R1018
JL1009
R1145
JL108
JL105
JL107
JL106
JL104
JL109
JL110
JL111
JL113
JL114
JL101
2
JL112
JL118
JL115
JL102
R1173
JL119
R102
JL103
JL116
C102
20
JL117
1
J
19
CN101
KEY
BOARD
MEX-M70BT
Note 1: When IC502 on the MAIN board is replaced, the destination
setting is necessary. Refer to “DESTINATION SETTING
METHOD” on page 4.
27
27
Note 2: When the KEY board is defective,
replace the FRONT PANEL (SV)
(ASSY) (Ref. No. FP1).
MEX-M70BT
5-6.
SCHEMATIC DIAGRAM - MAIN Section (1/4) - • See page 25 for Waveforms. • See page 32 for IC Block Diagrams. • See page 35 for IC Pin Function Description.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
MAIN BOARD (1/4)
IC702
C745
0.1
+3.3V REGULATOR
IC702
BU33TD3WG-TR
C771
0.1
C767
0.1
C749
1
C764
0.01
JL724
C770
0.01
C766
0.0022
C793
47p
FB702
R751
47k
CL702
IC704
OPTICAL
PICK-UP
BLOCK
(DAX-25A)
H
SELF
16
IN_SW
17
LOAD
18
SL
19
SP
20
BU_GND
21
D_SW
22
L_SW
23
DRV_GND
24
DRV_GND
25
DRV_6V
26
DRV_6V
27
JL730
MEC_INSW
JL731
MEC_LOAD
R715
0
JL715
JL732
MEC_DSW
JL733
MEC_LIMIT
JL701
R706
0
R740 100
C761 0.1
(1.5)
LPFO
(1.7)
VCOF
PVREF
RVSS3
(1)
(1.7)
VCOI
(3.3)
RVDD3
LRCK_IN_R
PIO17
CD_XCCE 82
45
SDOUT_CH0
LRCK_OUT
CD_BUCK 81
46
PIO16
BCK_OUT
CD_BUS3 80
PIO20
CD_BUS2 79
VDD3-2 83
47
CD_BUS1 78
49
CD_BUS0 77
MS 76
C728
0.1
C747
0.1
C731
1
C754
0.1
(0.1)
CD_ZDET
(3.4)
DEC_XMUTE
(0.4)
R733 0
LRCK_IN
(0)
R734 0
BSIF_BCK
(0)
BSIF_DO
(0)
BSIF_GATE
(0)
BSIF_ST_REQ
(0)
DEC_INT
(1.5)
R749
100k
(3.3)
(3.3)
C790
0.1
DSP_RST
(3.1)
R756 100
(3.3)
R757 100
(0.1)
R754 100
CD_SDI
(0.3)
R755 100
CD_SDO
CD_XCCE
CD_BUSCLK
(3.3)
R758
100k
(0)
R760
100k
R747
100k
R761
100k
R762
100k
C782
0.1
R737
0
R724
330
R727
0
R725
330
R729
330
R732
330
R735
330
R763
100k
3
SERVO_ON
C756
12p
C772
2.2
C750
4.7
50V
C712
0.1
C777
2.2
C780
0.0022
R744
10k
C763
12p
C781
0.0022
FB703
C748
4.7
50V
C730
0.1
R743
10k
C759
0.1
C746
4.7
50V
C787
0.1
C779
2.2
C765
2.2
R738
2.2k
C744
4.7
50V
C786
1
C775
2.2
R739
1M
C741
0.0033
(Page 31)
SP_DATA
C788
0.1
C740
0.0033
R702
0
SP_CLK
R753 100
C742
0.1
C739
0.0033
AU_GND
R752 100
(2.9)
R745
0
X701
16.9344MHz
C725
0.001
(3.4)
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
C743
22
6.3V
R701
0
R707
0
(1.7)
ADVSS3
48
C705
0.1
(Page 29)
BUS1
(1.7)
BCK_IN_R
44
C755
0.001
C723
0.01
JL702
A_GND
BUS2
(1.7)
43
VSS-3 84
D_GND
3
SLCO
SDIN_R
(1.6)
CL703
C716
2.2
R731
0
DR_GND
MAIN
BOARD
(4/4)
(1.7)
PIO11
C738
0.0033
J
RFI
/RST 85
41
42
JL716
I
2
RFEQO
DCOFC
RFO
AGCI
RVSS3
FNI2
FNI1
FPI2
FPI1
TPI
VDD1-4 86
C737
0.0033
MAIN
BOARD
(2/4)
RFRPI
(1.7)
(1.7)
(1.7)
(1.5)
(1.9)
(1.9)
(1.9)
(1.9)
(1.5)
(1.9)
(1.9)
(1.7)
PIO10
2
C729
1
TNI
DEC_INT 87
40
ADIN2 (IN_R-CH)
DRV_ON
MEC_SELFSW
BSIF_INT 88
IC705
TC94A99FG-003 (SYCH
50
1
JL713
RF AMP, DIGITAL SERVO PROCESSOR, AUDIO DSP
VDD3-1
ADVREFH
(1.7)
R723
100
C727
0.1
JL712
JL729
(1.7)
DEC_BCK_IN
VDD1-2
39
BSIF_GATE 89
ADVCM
14
15
DEC_LRCK_IN
MEC_EJECT
38
BSIF_DATA 90
IC705
(1.7)
(1.6)
G
13
TRACK
JL727
/SRAMSTB
(2.7)
FOCUS
DRV_ON
JL711
VDDM1
37
ADVREFL
12
JL710
R722
100
36
ADIN1 (IN_L-CH)
EJECT
R703
0
BCK_IN_F 91
(1.7)
11
JL714
LRCK_IN_F 92
DMO
(0.7)
10
JL709
FMO
(1.6)
LD
DRV_VREF
(0.9)
34
35
ADVDD3
FFC1
SERVO
BOARD
(1.7)
R721 100
R748
330k
ZDET 94
XVDD3
9
R720 0
1
DEC_XMUTE 93
XO
8
PD
DEC_SDIN_CH0
(1.7)
VSS-1
(3.3)
OP_GND
JL708
(0.9)
R719 100
TRO
33
(3.3)
7
R718
100
DEC_SDOUT_F
JL707
32
(1.5)
1/2VCC
JL706
DSP_SSTBY
2
SP_CLK 96
XI
6
C722
0.1
JL705
3
SP_DATA 95
(1.5)
5
(3.3)
FOO
XVSS3
C732
0.1
JL704
AVDD3
VSS-2
F
OP_VCC
(1.5)
30
31
VDD1-3
(3.4)
4
TEST 97
DVSS5
(1.5)
TEI
(1.5)
4
(1.7)
(US, CND)
C715
2.2
29
DAO5 (SUB-CH)
4
5
PDO 98
(1.7)
3
E
(2.1)
(1.7)
RFRP
DVDD12
SENSOR
BOARD
C
(1.6)
RFZI
DVDD5
CL701
6
TMAX 99
27
28
DAO4 (R_L-CH)
(1.5)
(1.7)
7
LPFN 100
(3.3)
CD MECHANISM
DECK BLOCK
(MG-101CF-188)
2
(3.3)
8
FSMONIT
(3.3)
NC
5
JL721
F
A
(1.7)
9
26
DVSS34
VOUT
JL703
1
JL723
R717 0
CN701
27P
B
C720
47
JL718
GND
STBY
(1.7)
(2.2)
C719
0.1
R711
0
JL722
(1.7)
IC703
C735
0.033
VDD1-1
(1.8)
DAO3 (F_L-CH)
3
VIN
Q701
2SA2119K
AUTOMATIC
POWER
CONTROL
(1.7)
(3.3)
C706
1
E
1
2
R704
0
25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
(2.1)
DVDD34
(3.3)
BU_3.3V
(Page 30)
(2.8)
+1.5V REGULATOR
IC703
BU15TD3WG-TR
DR_6V
MAIN
BOARD
(3/4)
C734
0.0056
JL719
C704
1
C702
0.1
1
R712
1
C714
0.047
4
C711
0.1
IC B/D
D
NC
C717
0.047
VRO
STBY
C721
470p
(1.5)
DVREF
GND
5
DAO2 (F_R-CH)
3
C718
470p
VOUT
(3.3)
2
(3.3)
R705
0
VIN
LDO
1
R750
15k
R709
1k
IC704
BU15TD3WG-TR
(3.3)
C783
0.015
JL720
+1.5V REGULATOR
C
C762 0.0056
22k
(1.7)
IC B/D
JL726
R726
R708
0
C736
0.001
R728
22k
C758 0.1
R714
12
4
C760 0.015
NC
(0.2)
STBY
(3.3)
AVSS3
B
GND
5
DVSS12
3
VOUT
MDI
2
(3.3)
VIN
DAO1 (R_R-CH)
1
(1.7)
(6)
C707
1
18
JL725
IC B/D
C768
0.01
A
17
C751
2.2
AU_RR_CH
K
4
MAIN
BOARD
(2/4)
(Page 29)
R741
2.7k
AU_FR_CH
R742
2.7k
AU_FL_CH
AU_RL_CH
C769
2.2
AU_SUB_CH
C773
2.2
AU_IN_LCH
AU_IN_RCH
Note: The service manual of the mechanism deck, used in this model, has been issued in a separate volume.
Please refer to the service manual of the MG-101 series for the mechanism deck information.
MEX-M70BT
28
28
MEX-M70BT
5-7.
SCHEMATIC DIAGRAM - MAIN Section (2/4) - • See page 25 for Waveforms. • See page 32 for IC Block Diagrams. • See page 35 for IC Pin Function Description.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
MAIN BOARD (2/4)
A
23
J401
6P
R
FRONT
JL401
L
JL402
R416
0
R420
10k
0.7
Q401
LTC014EUBFS8TL
45
ON/OFF
7
3
V+
CLK
6
4
C–
GND
5
IN_FL
C409 10 16V
R421 220
IN_FR
C406 10 16V
R413 220
C443
47p
R436
47k
AU_IN_LCH
R411
10k
R425
0
C417
2.2
R434
220
C425
2.2
R438
220
(Page 28)
J001
0
0
8.4
8.4
8.4
8.4
8.4
8.4
4.2
4.2
4.2
4.2
4.2
4.2
4.2
8.8
4.2
3.4
16.4
3.4
C404 0.1
40
4
MAIN
BOARD
(1/4)
AU_FR_CH
C407
0.1
0
0
R302
0
C013
0.1
0
0
(ANTENNA IN)
R21
0
32
33
34
35
36
37
38
39
40
XM_LCH
AU_IN_SUB
AUX_RCH
AU_IN_RL
AUX_GND
AU_IN_RR
AUX_LCH
AU_IN_FL
TU_RCH
AU_IN_FR
TU_GND
AU_OUT_FR
TU_LCH
AU_OUT_FL
NCO
AU_OUT_RR
NCO
AU_OUT_RL
BUS_RCH
AU_OUT_SR
BUS_LCH
AU_OUT_SL
14
13
11
10
JL1007
3
2
0
Q406
LTC914TUBFS8TL
0
Q407
LTC914TUBFS8TL
0
Q408
LTC914TUBFS8TL
MUTING
MUTING
MUTING
MUTING
C405
47p
1
C408
47p
C411
47p
C414
47p
C418
47p
FB02
TU01
TUX-DSP03
(TUNER UNIT)
C419
47p
4.2
4
4.2
5
4.1
4.1
4.1
4.1
6
0
Q405
LTC914TUBFS8TL
MUTING
C420
1
C421
1
C422
1
JL1018
JL1016
C1005
47
G
7
0
Q404
LTC914TUBFS8TL
MUTING
1
2
R437
1k
JL1001
R409
0
8
XM_LCH
JL1019
R1145
0
9
0
Q403
LTC914TUBFS8TL
0
XM_RCH
R1361
5.6k
17
12
4.1
15
4.1
16
4.1
31
NCO
FN2
30
IC402
22
18
29
INPUT SELECTOR,
ELECTRICAL VOLUME
IC402
BD3468FV
23
19
28
IC B/D
24
20
17
27
XM_GND
GND
18
0.1
19
26
XM_RCH
AU_OUT_LCH
I2C_SDA
20
FP2
HIVOLB
R1173
0
25
4.1
24
FP1
AU_OUT_RCH
23
FIL
FN1
VCCL(8.5V)
22
VCCH
37
NCO
21
I2C_SCL
C400 10
39
38
R102
0
(Page 31)
R435
47k
R432
47k
1.1
34
F
R423
47k
AU_RR_CH
33
MAIN
BOARD
(4/4)
R417
47k
AU_RL_CH
35
6
SUB
R414
47k
AU_FL_CH
36
E
L
AU_SUB_CH
3.5
41
(Page 30)
REAR
AU_IN_RCH
NCO
5
R
R415
6.8k
42
MAIN
BOARD
(3/4)
AUDIO OUT
0
0
R439
C441
47p
C442
47p
43
D
R440
16.4
C402
1
44
R422 220
R426
0
8.8
0
46
C+
8
C410 10 16V
R427
0
13.7
47
2
VOUT
C444
47p
C445
47p
IN_RR
R428
0
9.4
FB
R431
0
C413
0.1
R433 220
R429
0
1
I2C0_SCL
C446
10
35V
C416 10 16V
R430
0
1.3
R424
0
IN_RL
JL403
0
0
I2C0_SDA
C412
10
ATT
0
13.9
C
REGULATOR
IC401
NJW4190R-A
Q808
LTA014EUBFS8TL
Q402
LTA014EUBFS8TL
R404
150k
IC401
IC B/D
Q401, 402, 808
MUTING CONTROL
L401
2.2uH
C415
10
B
L01
4.7uH
R02
0
C03
1
C424
0.022
4.1
3
4.1
4
R09 1k
2.4
5
I2C1_SCL
R10 0
2.8
6
I2C1_SDA
R11
2.8
7
4.9
8
100
C423
0.022
C09
47
C010
1
JL1102
RF_ANT_IN
RF_GND_B
AUDIO_OUT_L
AUDIO_OUT_R
RSTN
SCL
SDA
+5V
CL01
R1055
0
FB404
R1003
100k
A_GND
3
STBY
NC
R1013
0
JL1014
R1019 100
3.3
C05
0.1
R1023 100
5
JL1010
JL1008
VOUT
GND
R1017 22
VIN
R1011 0
1
2
3.4
R1025
100
R1024
100k
C1006
0.1
11
R1029 0
C1353
0.1
C1323
4.7
R1320
1k
C1331
1
5
2
MIC_SIGNAL
1
MIC_GND
2
CNC1
O
1.5
0
MIC INPUT SELECTOR
2.4
2
1
6
3.3
2
5
3.3
4
1.5
3
VCC
GND
R1090
0
D1002
DZ2J06800L
C1010
1
2.7
3
1.3
4
NOISE
REG
STBY
IN+
1
USB_GND
2
D–
3
D+
4
V_BUS
5
3.3
3.3
3.3
3.3
C106
0.001
32
2.6
GND
V+
OUT
IN–
7
6
1.3
5
1.3
R1030
100
30
29
28
3.3
27
PPB4
PPB3
CSB3
VSS
PPB2
CSB2
PPB1
CSB1
CSB4
DP2 29
26
R1031
2.2k
VSS 27
DP1 26
VDD25
DM1 25
0
JL118
0
JL119
L1305
15nH
VDD25
X2
12
VSS
X1
11
C1332
0.1
JL102
JL101
L1304
15nH
JL115
C1333
0.1
JL114
JL113
C1017
0.001
C1334
0.1
R1036
680
C1013
0.047
C1012
1
C1011
1
C1018
4.7
C1019
0.47
RE_IN0
JL112
RE_IN1
JL111
KEY_IN1
JL110
R1313
0
R1353
1M
X1300
30MHz
D1001
DZ2J06800L
C1315
10p
(Page 31)
CN101
20P
JL109
KEY_IN0
D1306
RB751V40,115
MAIN
BOARD
(4/4)
DM2 28
3.3
R1033
15k
7
31
L1303
15nH
DM3 31
10
4
R1037
47
8
33
0
13 14 15 16 17 18 19 20 21 22 23 24
C1314
10p
USB_SHIELD
C104
0.001
L1302
15nH
0
2.6
1
C109
0.1
DP3 32
VDD33 30
0
0.5
USB CONTROLLER
IC1301
PPD720114GA-YEU-AT-SAK
0
IC1051
C1052
0.1
C1054
0.001
MIC
CN1300
5P
VDD33
IC1003
NJM2781RB1
IC1051
NLASB3157DFT2G
FB1003
J1001
AMBER
MIC AMP
FB1004
N
IC1003
R1052
0
C1050
0.001
2.6
C1014
1
GREEN
9
DPU
1.2
IC B/D
7
8
3.3
D1003
DZ2J06800L
MIC1001
1.2
JL1021
LED1
DMU
R1056
0
R1032
10k
CN1004
2P
0
6
IC1301
VDD33
3.3
LED2
VDD25 33
AVDD
0
R1021 100
5
VSSREG
AVSS
R1016 100
JL1017
6
M
R1012
0
R1020 100
JL1011
LED3
DP4 35
DM4 34
AVDD
GND
JL1015
4
VSS 36
VDD25OUT
2.6
5
LED4
2.6
4
3
AVSS(R)
3
SPI_CS
R108
470
D114
DZ2J06800L
SYSRSTB
1
RREF
SPI_CLK
SPI_MISO
R1001
0
VBUSM
VDD33REG
2.6
BUS_B
2
R103
2.2k
R107
12k
48 47 46 45 44 43 42 41 40 39 38 37
C1320
22
3.3
SPI_MOSI
C107
1
FB101
C1321
0.1
1
R1018 100
JL1013
C105
2.2
R105
12k
R104
470
R1318 2.43k
1
C103
1
3
JL1009
L
VCC
C1342
0.001
4
2
R1010
0
CN1001
6P
C1341
0.001
R1317 0
6
CN1002
K
R1040
18k
R1316 10k
7
C1324
1
3.3
GND_1
R1028 0
8
TEST
32
IC1002
BT MODULE (WB113C)
GND_40
GPIO[3]
9
3.3
GND_2
C1008 2.2
1.3
RESET
VREG_IN_USB
12
13
UART_TX
15
14
UART_RX
16
17
USB_DP
UART_RTS
GND_3
GPIO[1]
31
PATTERN
ANTENNA
18
GPIO[2]
WP
30
NC
PCM_CLK
RF
29
GND_5
GPIO[5]
GPIO[4]
10
40
28
SPI_PCM_SEL
PCM2_OUT
GND_38
JL1006
BT1
BT ANTENNA
27
39
JL1005
26
38
J
JL1004
VREG_EN
GND_6
SPI_CS
25
JL1003
PCM2_IN
SPI_CLK
R1006 100
USB_DN
USB/UART
24
VREG_IN_HV
PCM2_SYNC
37
CL1001
R1035 0
R1350
0
C1009 2.2
VREG_OUT_HV
36
BT_DIN
23
SPI_MOSI
CL1000
VREG_OUT_USB
22
SPI_MISO
BT_DOUT
JL1002
35
R1005 100
34
R1004 100
BT_SYNC
UART_CTS
20
BT_CLK
21
GPIO[0]
JL717
VDD_HOST
R1007
0
R412
0
VDD_PADS
R410
0
AU_GND
19
R407
0
DR_GND
(Page 28)
(NC)
JL01
4
33
2
MAIN
BOARD
(1/4)
I
5
D_GND
R1014 100
C1004
1
R406
0
H
R1015 22
+3.3V REGULATOR
IC1001
BU33TD3WG-TR
JL1012
IC B/D
IC1001
C1016
10
C1326
0.1
C1329
0.1
FB1301
FB1300
C1327
4.7
C1322
0.1
C1328
4.7
LCD_DATA
JL107
LCD_CE
JL106
LCD_CLK
JL105
JL104
JL108
SIRCS
C1339
2.2
JL116
JL117
FB1005
JL103
NOSE_SW
C102
1
C1338
47p
1
USB_VBUS
2
USB_GND
3
D–
4
D+
5
GND
6
AUX_L
7
AUX_R
8
AUX_GND
9
RE_0
10
RE_1
11
KEY_1
12
KEY_0
13
LCD_DATA
14
LCD_CE
15
LCD_CLK
16
ILL(FP+B)
17
SIRC
18
KEY_GND
19
GND
20
PANEL_SW
KEY
BOARD
C1337
0.1
L1307
C015
0.001
C014
1
R012
0
C1336
47p
CAM101
(CHASSIS)
CAM01
(CHASSIS)
MEX-M70BT
29
29
Note 1: IC1002 on the MAIN board cannot replace with single. When
this part is damaged, replace the complete mounted board.
Note 2: When the KEY board is defective, replace the
FRONT PANEL (SV) (ASSY) (Ref. No. FP1).
MEX-M70BT
Ver. 1.1
5-8.
SCHEMATIC DIAGRAM - MAIN Section (3/4) - • See page 25 for Waveforms. • See page 32 for IC Block Diagrams.
1
2
3
4
8
10
9
11
12
13
14
15
16
17
18
20
19
21
22
23
CN301
16P
ACC
13
14
BATT
15
16
ILL
11
NC
12
ACC
13
TELL_ATT
14
VCC
15
GND
16
C301
47p
C305
47p
C304
47p
C302
47p
R878
0
R301
4.7k
PW_GND4(FR)
OD
FR–
23
7.2
25
22
3.7
24
VCC1
21
7.2
FR+
MUTE
PW_GND3(RR)
20
14.1
RR+
RR–
19
17
7.2
7.2
AC_GND(BEEP)
16
3.7
18
IN_RR
15
3.7
IN_FL
PRE_GND
IN_FR
14
13
12
3.7
3.7
RIPPLE
11
3.7
IN_RL
PW_GND1(RL)
10
3.7
RL–
RL+
9
8
7.2
FL+
VCC2
7
FL_N
FL_P
JL311
RL_N
JL303
RL_P
JL304
RR_N
JL305
RR_P
IN_FL
10
POWER AMP
IC301
PURE5001H-4WX
C337
4.7
50V
IN_RL
9
NC
GND
FL_N
8
AMP_REM
12
FR_N
IN_FR
11
FL_P
7.2
FL–
FR_P
STBY
7
6
6
14.1
5
FL+
FR–
IC B/D
IC301
IN_RR
ILL
FR+
RL_P
RL_N
FL–
10
FRONT LCH (–)
REM OUT MAX0.4A
4
5
9
TO
CN301
RL–
RR_P
RR_N
4
8
3
3
6
2
7.2
5
7
FRONT LCH (+)
FRONT RCH (–)
1
RL+
RR–
3.4
REAR LCH (–)
FRONT RCH (+)
RR+
7.2
4
TAB
2
3
PW_GND2(FL)
1
REAR LCH (+)
REAR RCH (–)
2
REAR RCH (+)
1
PW1
C
7
MAIN BOARD (3/4)
A
B
6
5
C336
4.7
50V
C335
4.7
50V
C334
4.7
50V
FR_N
FR_P
FU1
10A
32V
J801
CN801
(SIRIUSXM IN)
(REMOTE IN)
1
D
2
4
5
3
6
8
9
R305
1k
C316
1
C317
1
R306
1k
C318
1
C319
1
R307
1k
C320
1
C321
1
R308
1k
C322
1
C323
1
R322
10k
R320
10k
R317
10k
R315
10k
JL307
JL309
7
10
JL310
L301
C340
47p
D303
GN1G
F801
2A
36V
5
4
GND
R841
100k
C832
0.1
R312
47k
D304
DA2J10100L
D401
DA2J10100L
C343
47p
4.9
0
R849
39k
R848
22
R309
150
C303
4700
16V
C310
0.1
C306
0.1
C329
0.1
C308
47p
C331
47p
R311
0
C324
47p
C315
47p
R401
22
R323
0
C326
1
C328
47p
C804
0.001
VCC
R304
0
2
3
C825
0.1
NC
R869
1k
C314
10
1
0
3.3
5
GND
R836
100
4.9
6
4
R868
1k
C313
47p
3
IC802
74LVC1G17GW-125
C311
47p
4.8
R831
100k
4.9
7
C325
1
C309
47p
FB804
8
VCC
2
C803
0.001
FB302
BUFFER
D301
DB2441600L
1
3.3
R818
12k
C338
47p
IC802
4.9
D818
DZ2J18000L
4.9
D817
DZ2J07500L
R814
12k
F
R821
1k
R817
0
D809
DZ2J18000L
R813
1k
R859
10k
BUFFER
IC801
TC7WH126FK
FB803
FB802
R856
10k
D808
DZ2J18000L
FB801
IC801
R829
100
C816
100p
R834
100
C1358
2200p
C811
100p
C332
0.1
C307
1
D805
DZ2J18000L
JL308
C342
47p
C339
47p
C807
0.001
E
C341
47p
C330
47p
R321
6.8k
C401
47
25V
C333
47p
R319
6.8k
R318
6.8k
R316
6.8k
47
46
XM_LCH
XM_RCH
45
G
R850
68k
JL301
JL302
R310
47k
CL302
CL301
43
42
D811
DZ2J18000L
C840
0.47
D812
GN1G
D813
DZ2J18000L
XM_PWR
9
RC_IN0
8
Q812, 814
BACK UP
VOLTAGE DETECT
JL806
16
ECO
C843
0.001
BATTERY CHECK
3.3
R888
0
0
0
IC1009
39
EEPROM
IC1009
MFI337S3959
37
1
1.7
36
35
3
R862
100k
NC
VCC
3.3
5
3.4
2
1.7
4
GND
1
GND
VCC
8
2
SDA
RST
7
3
NC
SCL
6
4
NC
NC
5
34
3.3
3.4
C566
0.1
Q806
LSCR523UBFS8TL
R1117
0
(Page
29)
33
Q807
LSCR523UBFS8TL
DIMMER DETECT
R830
39k
3.3
MAIN
BOARD
(2/4)
C1094
0.1
0
ACCESSORY CHECK
5
38
IC504
74LVC1G17GW-125
C844
4.7
25V
R861
22k
0.6
0
Q812
LTC044EUBFS8TL
Q814
LSCR523UBFS8TL
R842
0
15
EN_SYS
FB805
USB_ON
D816
RSX051VA-30
14
R860
47k
R858
4.7k
6.5
Q813
LTC014EUBFS8TL
6.5
40
BUFFER
D814
DA2J10100L
C841
0.47
R845
0
12
USB_OVR
SYNC_OUT
11
13
I
0
10
R827
390k
(Page 31)
RC_IN1
8
MAIN
BOARD
(4/4)
7
BU_IN
6
41
IC504
STB
5
I2C0_SDA
I2C0_SCL
3
4
AMP_ATT
2
R857
47k
BEEP
1
H
44
R303
10k
R1002
0
JL802
J
R871
0.068
1/2W
R872
0.047
1/2W
R809
10k
R808
10k
C814
100
16V
C813
22
C827
1
C812
1
R828
82k
C839
150p
C822
10
BU_3.3V
DR_6V
K
R837
33k
R822
270
C806
0.1
C820
0.47
C809
0.0068
R823
4.7k
IC B/D
R854
100k
C810
10p
R810
15k
O
C805
680p
R835
75k
R865
360k
C848
47
GATE5
C837
470
16V
C867
470
16V
C834
10
C876
10
C838
0.1
R852
10k
C875
10
R819
100k
R894
56k
C1301
10
C831
470
16V
C821
10
R826
300k
R890
0
C1304
1
C861
10
R1355
0
R1358
0
R838
120k
R840
120k
C830
470p
R846
1k
6.4
R806
100k
D802
DZ2J09100L
Q801
LTC014EUBFS8TL
Q802
LTA014EUBFS8TL
6.4
C878
2.2
C1306
47
R1300
1k
R1334
1k
C1307
22
C845
1
JL803
14.1
3
3.3
4
5.2
5
1
6
5.2
7
1.1
8
VREF
BST
LX
RT
VIN
GNDA
EN_SYS
SS_SYS
USBOUT
EN_USB
FB_USB
VIC_USB
USBIN
ISET_USB
SYNC
FLT_USB
16
6
15
1.6
C1318
2.2
R1311 100k
14
C1316 0.01
13
6
12
3.3
11
0
R1307 10k
10
1
C1317 0.1
9
3.3
R1303
100
Q801, 802
POWER CONTROL
0
R1301
10k
R1302
150k
C1310
100
16V
R1309
82k
R1310
82k
C1325
1
C1312
0.01
C1313
22
R1306
1k
R1312
1k
JL807
IC B/D
0
6.4
7
6.4
6.4
8
6
S
Q803
NTTFS5116PLTWG
B+ SWITCH
5
VCC
IC804
IC1302
+6V REGULATOR
+3.3V REGULATOR
C874
47p
C1330
47
C846
10
IC1302
BU33TD3WG-TR
VO
NC_7
VO_S
NC_6
GND
EN
R1359
0
IC B/D
IC804
BD60HA5WEFJ-E2
R812
100
6.4
6.4
R870
1k
C1303
10
D1300
RSX205L-30TE25
VIN0
C835
470
16V
0
C829
470p
2
JL1030
R863
0
JL823
R892
0
1
5.2
R851
0
JL808
C828
1
R1304
39k
10.5
44
43
14.1
C1308
680p
12.1
VINSW
BCAP
42
41
14.1
14.1
14.1
NC
HSW1
HSW2
39
40
C847
22
C850
10
R805
100k
R807
27k
38
GND4
37
36
SW2
3.3
14.1
FB2
INV2
34
1.5
0.9
C872
470p
D806
RSX205L-30TE25
C833
0.1
R839
680k
R833
1k
C819
10
R825
33k
L801
22uH
JL805
R803
18k
C817
0.1
L802
47uH
C866
47
D801
RB050L-60
C865
47
C818
10
C823
1
C815
10
JL820
R815
0.039
1/2W
R832
1k
R811
0
R816
0.039
1/2W
35
VOUT0
3.3
33
VIN1
ADJ1
31
3.3
0.7
32
VOUT1
30
1.2
0.9
29
ADJ2
VOUT2
28
GND3
8.8
26
VIN2
14.1
27
SNSH
25
GATE1
SNSL
24
23
11.5
14.1
M
14.1
6.4
C801
47
L1301
47uH
REGULATOR
IC803
BD49100RFS-E2
11.5
JL801
12.1
IC803
Q811
RSD046P05TL
N
14.1
1
0.9
EN
2
3.3
9.1
IC B/D
ADJ5
3.4
3.4
3
4
ECO
LD4EN
3.4
5
6
ERR1
SDA
ERR2
7
3.4
1.1
3.4
8
9
SYNC
SCL
10
0.6
RT
11
12
GND2
GND1
0.9
5
13
14
15
ADJ3
VOUT3
6.2
VIN3
16
6.4
VIN4
0
0
0
17
CLCAL
18
19
TIMER
VOCAL
5.2
0.9
S
6.4
20
VOUT4
14.1
21
1.7
FB1
11.5
INV1
22
S
NC_4
1
6
2
6
5.2
2
5.1
3
4
1
R1314
100k
3
VIN
VOUT
GND
STBY
NC
5
4
3.3
JL1300
R408
0
JL804
P
Q
R1354
0
S
14.1
Q810
RSD046P05TL
IC1300
OZ539IGN-A1-0-TR
REGULATOR
(Page
28)
R1333
100k
DC/DC CONVERTER
5
C1309
0.01
Q805
NVTFS5124PLTWG
Q810, 811
REGULATOR
L
IC1300
R853
2.7k
1
MAIN
BOARD
(1/4)
REGULATOR BOARD
IC B/D
IC001
+1.2V REGULATOR
IC001
S-13A1A12-E6T1U3
R
4
3.3
C003
4.7
5
6
SSC
VSS_5
VIN
ON/OFF
VSS_2
VOUT
JL003
3.3
3
2
1
JL002
1.2
Note: IC804 on the MAIN board cannot replace with single. When
this part is damaged, replace the complete mounted board.
C002
4.7
JL001
MEX-M70BT
30
30
MEX-M70BT
5-9.
SCHEMATIC DIAGRAM - MAIN Section (4/4) - • See page 25 for Waveforms. • See page 32 for IC Block Diagrams. • See page 35 for IC Pin Function Description.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
STB
BEEP
AMP_ATT
ACC_IN
BU_IN
B
SYNC_OUT
MAIN BOARD (4/4)
A
115
NC
0 116
Vss
R578 100
3.3 117
C539
0.1
M
C1344
1
BT_CLK
BT_SYNC
C520
0.1
C526
22
C527
0.1
C569
0.1
C544
0.1
R657 100k
(3.3)
3.3
JL538
R605 100k
R606 100k
0
C567
1
45
ACC_IN
R609 100
R590 100
DRV_ON 47
Vss 46
R608 0
(3.3)
0
3.3
PVcc 50
KEY_ACK1 49
XM_TX 48
BT_CLK 52
MEC_INSW 51
BT_DOUT 54
BT_SYNC 53
0
1.2
34
1.2 (0.9)
33
1.3 (0.9)
HIT2_RESET
DEC_SDOUT_F
1.7
R631 10k
DEC_LRCK_IN
30
1.7
R632 10k
DEC_BCK_IN
29
0
R557 100
28
0
R624 100
27
0.4
26
3.3
25
0
R642
100
20
NOSE_SW
22
SIRCS
23
24
R552
470
R559
100k
D502
RB751V40,115
R558
100k
R576
100k
R565
470
8
R561
100
C522
8p
X501
48MHz
L504
4.7uH
BSIF_BCK
JL532
R646 10k
CD_SDO
23
0.3
22
1.2
21
0.1
R627 100
JL531
CD_SDI
20
3.1
R634 100
JL533
CD_XCCE
18
3.3
R625 100
JL534
17
0
R533 0
R616
0
3.3
R630 100
DSP_SSTBY
DSP_RST
0
DEC_INT
R528 0
0
BSIF_GATE
3.3
R637 100k
0.1
CD_ZDET
R683 0
0 (3.4)
DEC_XMUTE
1.2
R647 100k
3.3 (2.9)
SP_DATA
R648 100k
3.4
SP_CLK
R638 100
(3.3)
SERVO_ON
0
R592 100k
R639 100
R650 100
3
3.4
R640 100k
2
3.3
R641 100k
1
FB505
FB504
R619
100
R651
100
JL530
R615
100k
R614
100k
R612
100
R602
100
MEC_SELFSW
R626
100k
C568 0.001
3.3
0
3.3
L502 15nH
R652
100
CS
1
HOLD
DO
2
CLK
WP
3
GND
4
8
VCC
7
6
5
DI
IC502
ATT
R611
100
CN502
8P
JL522
R601 100
JL523
R604 100
JL524
R603 100
JL525
R665 100
JL526
R656 100
JL527
R600 100
JL528
JL529
1
SF_SI
2
SF_CE
3
SF_SO
4
SF_CLK
5
WP
6
HOLD
7
RESET
8
GND
SERIAL FLASH
(NC)
0
0
0
BUS1
BUS2
IC502
MX25L3235EM2I-10G
MEX-M70BT
(Page 29)
BSIF_ST_REQ
R610
100
C536
22
26
MAIN
BOARD
(2/4)
CD_BUSCLK
R635 100k
3.4
L505
4.7uH
C535
0.1
29
19
3.3
C534
22
30
28
27
R633 10k
7
31
CL512
CL539
R613
100k
19
32
BSIF_DO
C545
0.1
R649
100
33
24
176
ATT
175
100
C553 10k
31
3.4
174
PVcc
3.3
0
SF1_D1
Vss
USB_CHG_MOD1
173
172
171
0
R629
R622 100
32
CL528
3.3
170
SF1_D0
SF_CLK
SF1_D3
SF_CE
169
167
168
0
0
SF1_D2
166
3.3
DEC_SDIN_CH0
L501 15nH
N
LCD_CLK
R662 10k
18
C537
0.1
(Page 29)
3.3
R598 100k
R599 100
0
BU_IN 56
BT_DIN 55
NC
0
165
NC
164
Vss
163
Vss
162
161
USBUVss
USBUVcc
USBAVss
R583
5.6k
C525
0.1
C518 7p
6
0
35
R553
100
17
MAIN
BOARD
(2/4)
DRV_ON
MEC_INSW
BT_DIN
R568 0
MEC_LIMIT
R597 220k
CL513
3.3
(3.3)
0
R594 0
3.3
R659 10k
R593 100
(0)
1.2
Vcc 58
MEC_LIMIT 57
PVcc 62
Vss 61
MEC_LOAD 60
KEY_ACK0 59
DEBUG_RX 64
XM_RX 63
TBD 66
BT_RX 65
RTC_X1 67
1.4
RTC_X2 68
1.6
1.7
1.7
3.3
PLLVcc 69
70
Vss 72
XTAL 71
EXTAL
Vss 73
NMI 74
RES 76
Vss
75
3.3
CL521
3.3
77
3.3
NC 78
PVcc
3.3
CL522
CL523
R658 100
CL525
C504
0.01
CL524
C530
22
CL530
C503
0.01
3.3
R544
33k
C532
0.1
160
BT_TX
RE_IN1
159
RE_IN0
1.2
NC
133
L
CL537
36
SERVO_ON 4
USBAVcc
132
R540
33k
R623 1k
MEC_EJECT
CL529
37
BT_MIC_DET
NC
USBAPVcc
R511
1k
LCD_CE
R643
100k
38
SP_CLK 5
158
0 131
CL536
AMP_ATT
157
0 130
RE_IN1
R628 1k
I2C1_SDA
3.3
3.3 129
0
SP_DATA 6
3.3
R539 2.2k
LCD_DATA
39
AMPSTB
USBAPVss
R510
1k
3.3 128
CL535
I2C1_SCL
REFRIN
RE_IN0
R538 2.2k
R621 1k
3.3
Vcc 7
I2C0_SDA
USBDVss
2.8 127
3.4 125
R535 2.2k
R504 100
156
2.8 126
R506 100
155
R505 100
CL504
R587 100
0
40
DEC_XMUTE 8
I2C0_SCL
154
CL503
I2C1_SDA
(0)
41
Vss 9
1.3
CL502
I2C1_SCL
42
CD_ZDET 10
MEC_DSW
USBDVcc
I2C0_SDA
R534 2.2k
R503 100
PVcc
153
I2C0_SCL
1.1
PVcc 11
RE_ON
LRCK_IN
2.8
BSIF_GATE 12
Vss
VBUSIN0
K
3.4 124
RC_IN1
C549
0.1
FB501
43
DSP_RST 14
DEC_INT
13
Vcc
152
(0) 123
R655
0
44
DSP_SSTBY 15
USB_ON
1.2
3.3 122
CL501
Vss
CD_BUSCLK
4.5
3.3 121
C551
0.1
0.3
BSIF_ST_REQ 16
NC
DP0
120
CD_XCCE
DM0
3.3 119
C507
0.1
CD_SDO
BT_RST
R660 100
R560 100k
Vcc
NC
114
1.2 118
R556
100
RC_IN1
Vss
CD_SDI
IC503
R7S7200022CFP
BT_PWR
USBDPVss
J
BSIF_BCK
SYSTEM CONTROLLER
USB_OVR2
151
USB_ON
USB_ON2
150
CL505
C511
0.1
IC503
PVcc
149
3.3 113
PVcc
0
112
R517
100
BSIF_LR
USB_OVR
0
3.4 111
R516 100
Vss
USBDPVcc
3.3 110
R529 100k
I
BSIF_DO
USBDVss
3.3 109
R514 100
PWR_ECO
148
R515
100
BEEP
Vcc
147
3.3 108
DEC_BCK_IN
EN_SYS
3.3
3.4 107
R523 100k
DEC_LRCK_IN
USBDVcc
R524
100
Vss
NC
106
D501
RB751V40,115
CL510
103
ILL_IN
3.4 105
0
3.3
DEC_SDOUT_F
Vss
146
R550
KEY_IN0 82
RC_IN0
81
NC
80
NC 79
DEC_SDIN_CH0
TCK
102
145
R682 100k
USB_OVR
3.3
TMS
101
1.2 104
ECO
KEY_IN1 83
100
1.2
3.3
Vcc
144
R522 100
LCD_CLK
TDI
NC
R521 100k
EN_SYS
99
Vss
TDO
NC
3.3
TRST
98
143
0
97
NC
USBDPVss
R548 10k
R549 100k
XM_PWR
142
3.3
Vcc
96
USBDPVcc
H
R520
100
R547 10k
LCD_CE
95
USB_X2
R501
100
0
3.3
PVcc
141
SYNC_OUT
R542 100
SYNC_ON
140
R546 10k
LCD_DO
139
R502
100
SYNC_OUT
3.3
R509
100
0
LRCK_INT
MEC_EJECT
1.7
16
I2C0_SCL
3.3
C550
0.1
C548
0.1
R644
100
Vss
USB_X1
R545 10k
C546
0.1
R526
100
NC
1.7
15
3.3
CL511
R525 100
R512
100
94
R654
0
R653
2.2k
AUDIO_X1
Vss
I2C0_SDA
93
MEC_SELFSW
3.3
1.2
13
14
92
138
0
137
CL508
R527
C543
0.1
C547
0.1
DEBUG_TX
(3.3)
11
PVcc
91
R507
0
10
12
BSCANP
90
SIRCS
G (Page 30)
C510
0.1
89
DOOR_SW
9
8
1.7
136
7
3.3
CL507
135
DEC_BCK_IN
6
8
0
3.3
5
CL509
USB_CHG_MOD2
R541
100k
ACC_IN
134
4
MAIN
BOARD
(3/4)
AVref 88
Vss
87
AVcc
86
NC
85
NC
84
XM_PWR
3
0
F
3.3
C506
0.1
2
MEC_LOAD
R519
100
R555
100
C505
0.1
1
C541 1
C531
15p
X503
32.768kHz
JL539
JL540
3.3
C515
0.1
R591 100k
C512
0.1
R586 100k
E
C508
0.001
0
KEY_IN1
3.3
R554
100
R582 100k
KEY_IN0
CL517
RC_IN0
R617
100k
C540
0.1
C523
0.1
C517
0.1
R551
100
C509
0.1
R607
100
R618
100
R585 100k
C516
1
C538
0.1
6
R579
270k
CL520
C560
47
C521
0.1
C528
10p
R681
100k
CL518
R684
0
R562
10k
C559
0.0033
R571
0
CL519
R563
10k
C519
0.1
R567
0
3.3
R566
10k
C501
100
10V
7
1.6
0
C564
220
6.3V
3.3
R666 0
CT 3
X502
13.333MHz
VOUT 4
2 VDD
C533
15p
C570 2.2
C502
100
10V
D
1 GND
R573 100k
3.3
R513
100
R574
0
R572 100k
C
C571
0.1
C524
10p
RESET SIGNAL GENERATOR
IC501
BU4228F-STR
C529 0.1
IC B/D
IC501
BT_DOUT
MEC_DSW
R680
100
3
MAIN
BOARD
(1/4)
(Page 28)
Note: When IC502 on the MAIN board is replaced, the destination setting is
necessary. Refer to “DESTINATION SETTING METHOD” on page 4.
31
31
MEX-M70BT
• IC Block Diagrams
– MAIN Board –
IC301 PURE5001H-4WX
IC402 BD3468FV-E2
FADER
BOOST
FADER
ATT
LEVEL
SHIFT
40 OUTC
LEVEL
SHIFT
39 OUTS
FADER
ATT
LEVEL
SHIFT
38 OUTR1
FADER
ATT
LEVEL
SHIFT
37 OUTR2
SUB
SELECTION
A1 1
A2 2
6
7 8 9
10
11
12
13
14
15
16
17 18 19
20
21
TAB
ST-BY
OUT2+
VCC2
OUT1–
PW-GND1
OUT1+
SVR
IN1
IN2
S-GND
IN4
IN3
AC-GND
OUT3+
PW-GND3
OUT3–
VCC1
OUT4+
22
23 24
25
BP2 4
CP1 5
FADER
BOOST
ISO
GND
AMP
REAR
SELECTION
FADER
BOOST
ISO
GND
AMP
ISO
GND
AMP
CP2 7
DP1 8
DP2 10
VREF
8 VOUT
–
+
DIVIDER
INTERNAL CLK: 1/2
EXTERNAL CLK: 1/4
EP1 11
6 CLK
EP2 13
LEVEL
SHIFT
FADER
ATT
+
LEVEL
SHIFT
36 OUTF1
FADER
BOOST
FADER
ATT
+
LEVEL
SHIFT
35 OUTF2
FRONT
SELECTION
34 INF2
33 INF1
32 INR2
ISO
GND
AMP
31 INR1
V+ 3
C– 4
ISO
GND
AMP
EN 12
7 ON/OFF
CLOCK
GENERATOR
ISO
GND
AMP
FADER
BOOST
FP1 14
THERMAL
SHUT DOWN
ISO
GND
AMP
FN1 15
LEVEL
SHIFT
FN2 16
30 INS
SUB GAIN
ADJUST
LEVEL
SHIFT
C+ 2
ISO
GND
AMP
DN 9
IC401 NJW4190R-A (TE2)
FB 1
ISO
GND
AMP
INPUT SELECTOR
(1 SINGLE-END AND 5 STEREO ISO)
CN 6
INPUT GAIN
5
HSD
4
MUTE
2 3
OUT4–
PW-GND4
1
PW-GND2
OUT2–
BP1 3
MAIN GAIN
ADJUST
HIGH SIDE
DRIVER
FADER
ATT
2ND ORDER LOW-PASS FILTER
FADER
BOOST
29 INC
ISO
GND
AMP
5 GND
FP2 17
28 IG1
27 IG2
MIN 18
REG (4.15V)
BN 19
IC501 BU4228F-STR
IC702, 1001, 1302 BU33TD3WG-TR
IC703, 704 BU15TD3WG-TR
HIVOLB 20
I2C BUS
LOGIC
GND 1
VOLTAGE
REFERENCE
+
–
OVER CURRENT
PROTECTION
4 VOUT
3 CT
GND 2
VDD 2
STBY 3
MEX-M70BT
23 SDA
22 SCL
21 VCCH
VIN 1
VREF
26 VCCL
25 VREF
24 GND
THERMAL
SHUTDOWN
–
+
5 VOUT
4 NC
STANDBY
32
32
MEX-M70BT
IC803 BD49100RFS-E2
ADJ5 1
LDO5
(CONTROLLER)
44 GATE5
INTERNAL
REGULATOR
EN 2
BU_SW
LD4EN 3
43 VIN0
UVLO
BU_CONT
L_DET
OVP
ECO 4
42 BCAP
ERR1 5
41 VINSW
ERR2 6
SDA 7
SCL 8
40 N.C.
I2C
I/F
TSD
HSIDE
SW2
39 HSW2
HSIDE
SW1
38 HSW1
SYNC 9
GND1 10
RT 11
37 GND4
OSC
GND2 12
VOUT3 13
ADJ3 14
VIN3 15
VIN4 16
CLCAL 17
VOCAL 18
TIMER 19
DCDC2
LDO3
STB_LDO
LDO4
(CALIBRATE)
TIMER
LATCH
32 VIN1
31 ADJ1
30 VOUT1
LDO2
29
28
27
26
DCDC1
(CONTROLLER)
ADJ2
VOUT2
GND3
VIN2
25 SNSH
24 SNSL
23 GATE1
N.C.
N.C.
EN
IC1003 NJM2781RB1
VCC
IC804 BD60HA5WEFJ-E2
SW2
FB2
INV2
VOUT0
LDO1
VOUT4 20
INV1 21
FB1 22
36
35
34
33
8
7
6
5
NOISE 1
8 GND
REG 2
REGULATOR
STBY 3
OVER CURRENT
PRORECITON
IN+ 4
SOFT
START
–
–
+
7 V+
+
–
6 OUT
5 IN–
1
2
3
4
VO
VO_S
GND
N.C.
THERMAL
SHUTDOWN
33
MEX-M70BT
IC1300 OZ539IGN-A1-0-TR
16 VREF
BST 1
S
Q
R
HDR
OSCILLATOR
LX 2
15 RT
REFERENCE
GENERATOR
OVER CURRENT
PROTECTION
14 GNDA
+
–
+
VIN 3
EN_SYS 4
USBOUT 5
VS
SEL
+
–
FB_USB 6
ADJUSTMENT
GENERATOR
CHARGE
PUMP
13 SS_SYS
12 EN_USB
+
–
11 VIC_USB
USBIN 7
VOUT_SYS (USBIN)
FAULT PROTECTION
2V
UVLS
+
–
OVER-CURRENT
LIMIT
10 ISET_USB
USB FAULT
PROTECITON
9 FLT_USB
SYNC 8
– REGULATOR Board –
IC001 S-13A1A12-E6T1U3
VOUT 1
6 VIN
OVERCURRENT
PROTECTION
THERMAL
SHUTDOWN
+
–
ON/OFF
CONTROL
REFERENCE
VOLTAGE
5 VSS
VSS 2
ON/OFF 3
INRUSH CURRENT
LIMITING
34
4 SSC
MEX-M70BT
• IC Pin Function Description
MAIN BOARD IC503 R7S7200022CFP (SYSTEM CONTROLLER)
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
Pin Name
BT_MIC_DET
AMP_ATT
AMPSTB
SERVO_ON
SP_CLK
SP_DATA
Vcc
DEC_XMUTE
Vss
CD_ZDET
PVcc
BSIF_GATE
DEC_INT
DSP_RST
DSP_SSTBY
BSIF_ST_REQ
CD_BUSCLK
Vss
CD_XCCE
CD_SDO
Vcc
CD_SDI
Vss
BSIF_BCK
PVcc
BSIF_LR
BSIF_DO
BEEP
DEC_BCK_IN
DEC_LRCK_IN
Vss
DEC_SDOUT_F
DEC_SDIN_CH0
Vcc
LCD_CLK
Vss
NC
LCD_CE
PVcc
LCD_DO
MEC_EJECT
SYNC_OUT
DEBUG_TX
LRCK_INT
ACC_IN
Vss
DRV_ON
XM_TX
KEY_ACK1
PVcc
MEC_INSW
BT_CLK
BT_SYNC
BT_DOUT
BT_DIN
BU_IN
I/O
I
O
O
O
O
I
O
I
O
I
O
O
I
O
O
O
I
O
O
O
O
I
I
O
I
O
O
O
O
O
O
I
I
O
O
I
I
I
I
O
I
I
Description
External microphone plug insert detection signal input terminal for the Bluetooth
Amplifier muting on/off control signal output to the power amplifier “L”: muting on
Standby signal output to the power amplifier “L”: standby
Power on/off control signal output to the servo section “H”: power on
Serial data transfer clock signal output to the audio DSP
Serial data input from the audio DSP
Power supply terminal (+1.18V) (for internal)
Muting on/off control signal output to the audio DSP “L”: muting on
Ground terminal
Zero data detection signal input from the audio DSP
Power supply terminal (+3.3V) (for I/O)
Gate signal output to the audio DSP
Interrupt signal input from the audio DSP
Reset signal output to the audio DSP “L”: reset
Standby signal output to the audio DSP “L”: standby
Request signal input from the audio DSP
Serial data transfer clock signal output to the audio DSP
Ground terminal
Chip enable signal output to the audio DSP
Serial data output to the audio DSP
Power supply terminal (+1.18V) (for internal)
Serial data input from the audio DSP
Ground terminal
Bit clock signal output to the audio DSP
Power supply terminal (+3.3V) (for I/O)
L/R sampling clock signal output to the audio DSP
Audio data output to the audio DSP
Beep sound drive signal output to the power amplifier
Bit clock signal input from the audio DSP
L/R sampling clock signal input from the audio DSP
Ground terminal
Audio data output to the audio DSP
Audio data input from the audio DSP
Power supply terminal (+1.18V) (for internal)
Serial data transfer clock signal output to the front panel block
Ground terminal
Not used
Chip enable signal output to the front panel block
Power supply terminal (+3.3V) (for I/O)
Serial data output to the front panel block
Loading motor drive signal (eject direction) output terminal “H”: motor on
Frequency control signal output to the regulator and DC/DC converter
Transmit data output terminal for the debug Not used
L/R sampling clock signal input from the pin 26 (BSIF_LR)
Accessory power detection signal input terminal “L”: accessory power on
Ground terminal
Driver control signal output to the CD mechanism deck block
Serial data output to the SIRIUSXM in connector
Key acknowledge signal (wake up signal) input from the front panel block
Power supply terminal (+3.3V) (for I/O)
Disc insert detection switch input terminal
Serial data transfer clock signal input from the BT module
Sync signal input from the BT module
Audio data output to the BT module
Audio data input from the BT module
Back-up power detection signal input terminal “L” is input at low voltage
35
MEX-M70BT
Pin No.
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72, 73
74
75
Pin Name
MEC_LIMIT
Vcc
KEY_ACK0
MEC_LOAD
Vss
PVcc
XM_RX
DEBUG_RX
BT_RX
TBD
RTC_X1
RTC_X2
PLLVcc
EXTAL
XTAL
Vss
NMI
Vss
I/O
I
I
O
I
I
I
I
I
O
I
O
I
-
76
RES
I
77
78 to 80
81
82, 83
84, 85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
PVcc
NC
RC_IN0
KEY_IN0, KEY_IN1
NC
AVcc
Vss
AVref
BSCANP
PVcc
AUDIO_X1
NC
Vss
SYNC_ON
Vcc
XM_PWR
TRST
TDO
TDI
TMS
TCK
Vss
ILL_IN
EN_SYS
Vcc
PWR_ECO
Vss
USB_OVR
PVcc
USB_ON2
USB_OVR2
BT_PWR
NC
BT_RST
NC
Vss
NC
USB_ON
Vcc
RC_IN1
I
I
I
I
O
O
I
O
I
I
I
I
O
O
I
O
I
O
O
O
I
36
Description
Limit in detection switch input terminal
Power supply terminal (+1.18V) (for internal)
Key acknowledge signal (wake up signal) input from the rotary commander
Loading motor drive signal (loading direction) output terminal “H”: motor on
Ground terminal
Power supply terminal (+3.3V) (for I/O)
Serial data input from the SIRIUSXM in connector
Receive data input terminal for the debug Not used
Serial data input from the BT module
Fixed at “L” in this unit
System clock input terminal (32.768 kHz)
System clock output terminal (32.768 kHz)
Power supply terminal (+1.18V) (for PLL)
System clock input terminal (13.333 MHz)
System clock output terminal (13.333 MHz)
Ground terminal
Fixed at “H” in this unit
Ground terminal
System reset signal input from the reset signal generator “L”: reset
For several hundreds msec. after the power supply rises, “L” is input, then it change to “H”
Power supply terminal (+3.3V) (for I/O)
Not used
Rotary commander key input terminal
Front panel key input terminal
Not used
Power supply terminal (+3.3V) (analog system)
Ground terminal
Reference power supply (+3.3V) input terminal (analog system)
Fixed at “L” in this unit
Power supply terminal (+3.3V) (for I/O)
Audio clock signal input terminal
Not used
Ground terminal
Not used
Power supply terminal (+1.18V) (for internal)
Power supply on/off control signal output to the SIRIUSXM in connector “H”: power on
Reset signal input terminal for the JTAG Not used
Data output terminal for the JTAG Not used
Data input terminal for the JTAG Not used
Mode selection signal input terminal for the JTAG Not used
Clock signal input terminal for the JTAG Not used
Ground terminal
Illuminate line detection signal input terminal
Power on/off control signal output to the regulator and DC/DC converter “H”: power on
Power supply terminal (+1.18V) (for internal)
Low power mode selection signal output to the regulator “L”: low power mode
Ground terminal
USB over current detection signal input from the regulator “L”: over current
Power supply terminal (+3.3V) (for I/O)
USB power on/off control signal output to the DC/DC converter “H”: power on
USB over current detection signal input from the DC/DC converter “L”: over current
Power on/off control signal output terminal for the Bluetooth section “H”: power on
Not used
Reset signal output to the BT module “L”: reset
Not used
Ground terminal
Not used
USB power on/off control signal output to the regulator “H”: power on
Power supply terminal (+1.18V) (for internal)
Rotary commander shift key input terminal
MEX-M70BT
Pin No.
121
122
123
124
125
126
127
128
129, 130
131, 132
133
134
135
136
137
138
139
140
141
142
143 to
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162, 163
164, 165
166
167
168
169
170
171
172
173
174
175
176
Pin Name
Vss
RE_ON
PVcc
MEC_DSW
I2C0_SCL
I2C0_SDA
I2C1_SCL
I2C1_SDA
NC
RE_IN0, RE_IN1
BT_TX
USB_CHG_MOD2
DOOR_SW
SIRCS
MEC_SELFSW
Vss
USB_X1
USB_X2
USBDPVcc
USBDPVss
I/O
O
I
O
I/O
O
I/O
I
O
O
I
I
I
I
O
-
NC
-
USBDVcc
USBDVss
USBDPVcc
USBDPVss
DM0
DP0
VBUSIN0
USBDVcc
USBDVss
REFRIN
USBAPVss
USBAPVcc
USBAVcc
USBAVss
USBUVcc
USBUVss
Vss
NC
SF1_D2
SF1_D3
SF1_CLK
SF1_CE
SF1_D0
Vss
SF1_D1
USB_CHG_MOD1
PVcc
ATT
HIT2_RESET
I/O
I/O
I
I
O
O
O
O
O
I
O
O
O
Description
Ground terminal
Jog dial pulse pull-up signal output terminal
Power supply terminal (+3.3V) (for I/O)
Chucking end detection switch input terminal
Serial data transfer clock signal output to the electrical volume, regulator and EEPROM
Two-way data bus with the electrical volume, regulator and EEPROM
Serial data transfer clock signal output to the tuner unit
Two-way data bus with the tuner unit
Not used
Jog dial pulse input from the rotary encoder
Serial data output to the BT module
USB charge control signal output terminal Not used
Front panel remove/attach detection signal input terminal “L”: Front panel is attached
Remote control signal input from the front panel block
Self loading position detection switch input terminal
Ground terminal
System clock input terminal (48 MHz)
System clock output terminal (48 MHz)
Power supply terminal (+3.3V) (for USB digital)
Ground terminal (for USB digital)
Not used
Power supply terminal (+1.18V) (for USB digital)
Ground terminal (for USB digital)
Power supply terminal (+3.3V) (for USB digital)
Ground terminal (for USB digital)
Two-way USB data (–) bus with the USB controller
Two-way USB data (+) bus with the USB controller
VBUS power detection signal input terminal “H”: VBUS power is detected
Power supply terminal (+1.18V) (for USB digital)
Ground terminal (for USB digital)
External resistor connection terminal
Ground terminal (for USB analog)
Power supply terminal (+3.3V) (for USB analog)
Power supply terminal (+1.18V) (for USB analog)
Ground terminal (for USB analog)
Power supply terminal (+1.18V) (for USB 48 MHz)
Ground terminal (for USB 48 MHz)
Ground terminal
Not used
Write protect signal output to the serial flash
Hold signal output to the serial flash
Serial data transfer clock signal output to the serial flash
Chip select signal output to the serial flash
Serial data output to the serial flash
Ground terminal
Serial data input from the serial flash
USB charge control signal output terminal Not used
Power supply terminal (+3.3V) (for I/O)
Audio muting on/off control signal output terminal “H”: muting on
Reset signal output to the tuner unit “L”: reset
37
MEX-M70BT
MAIN BOARD IC705 TC94A99FG-003 (SYCH (RF AMP, DIGITAL SERVO PROCESSOR, AUDIO DSP)
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16, 17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40, 41
42
43
44
45
46, 47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
38
Pin Name
LPFO
PVREF
VCOF
RVSS3
VCOI
RVDD3
SLCO
RFI
RFRPI
RFEQO
DCOFC
AGCI
RFO
RVSS3
FNI2
FNI1, FPI2
FPI1
VDD1-1
TPI
TNI
VRO
AVSS3
MDI
LDO
FSMONIT
RFZI
RFRP
TEI
AVDD3
FOO
TRO
VSS-1
FMO
DMO
VDDM1
/SRAMSTB
VDD1-2
VDD3-1
PIO10, PIO11
SDIN_R
BCK_IN_R
LRCK_IN_R
SDOUT_CH0
PIO16, PIO17
LRCK_OUT
BCK_OUT
PIO20
DVDD12
DAO1 (R_R-CH)
DVSS12
DAO2 (F_R-CH)
DVREF
DVDD34
DAO3 (F_L-CH)
DVSS34
DAO4 (R_L-CH)
DVDD5
DAO5 (SUB-CH)
I/O
O
O
I
O
I
I
O
O
I
O
I
I
I
I
I
O
I
O
O
I
O
O
O
O
O
O
I
I/O
I
I
I
O
I/O
O
O
I/O
O
O
O
O
O
Description
PLL circuit low-pass filter amplifier output terminal
PLL circuit reference voltage (+1.65V) terminal
VCO filter terminal
Ground terminal
DSP VCO control voltage input terminal
Power supply terminal (+3.3V)
EFM slice level output terminal
RF signal input terminal
RF ripple signal input terminal
RF equalizer circuit output terminal
RF equalizer offset compensation low-pass filter output terminal
RF signal auto gain control amplifier input terminal
RF signal generation amplifier output terminal
Ground terminal
Main beam (B) input from the CD mechanism deck block
Main beam (C) input from the CD mechanism deck block
Main beam (A) input from the CD mechanism deck block
Power supply terminal (+1.5V)
Sub beam (F) input from the CD mechanism deck block
Sub beam (E) input from the CD mechanism deck block
Reference voltage (+1.65V) output to the CD mechanism deck block
Ground terminal
Laser power detection signal input from the CD mechanism deck block
Laser power control signal output the CD mechanism deck block
Not used
RF ripple zero-cross signal input terminal
RF ripple signal output terminal
Tracking error signal output terminal
Power supply terminal (+3.3V)
Focus coil control signal output to the CD mechanism deck block
Tracking coil control signal output to the CD mechanism deck block
Ground terminal
Sled motor control signal output to the CD mechanism deck block
Spindle motor control signal output to the CD mechanism deck block
Power supply terminal (+1.5V)
Standby signal input from the system controller “L”: standby
Power supply terminal (+1.5V)
Power supply terminal (+3.3V)
Not used
Audio data input from the system controller
Bit clock signal input from the pin 49 (BCK_OUT)
L/R sampling clock signal input from the pin 48 (LRCK_OUT)
Audio data output to the system controller
Not used
L/R sampling clock signal output to the system controller
Bit clock signal output to the system controller
Not used
Power supply terminal (+3.3V)
Audio signal (rear R-ch) output to the electrical volume
Ground terminal
Audio signal (front R-ch) output to the electrical volume
Reference voltage terminal
Power supply terminal (+3.3V)
Audio signal (front L-ch) output to the electrical volume
Ground terminal
Audio signal (rear L-ch) output to the electrical volume
Power supply terminal (+3.3V)
Audio signal (sub-ch) output to the electrical volume
MEX-M70BT
Pin No.
62
63
64
65
66
67
68
69
70
71
72
73
74
75
Pin Name
DVSS5
VDD1-3
VSS-2
XVSS3
XI
XO
XVDD3
ADVDD3
ADIN1 (IN_L-CH)
ADVREFL
ADVCM
ADVREFH
ADIN2 (IN_R-CH)
ADVSS3
I/O
I
O
I
O
O
O
I
-
76
MS
I
77, 78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
CD_BUS0, CD_BUS1
CD_BUS2
CD_BUS3
CD_BUCK
CD_XCCE
VDD3-2
VSS-3
/RST
VDD1-4
DEC_INT
BSIF_INT
BSIF_GATE
BSIF_DATA
BCK_IN_F
LRCK_IN_F
DEC_XMUTE
ZDET
SP_DATA
SP_CLK
TEST
PDO
TMAX
LPFN
I/O
O
I
I
I
I
O
O
I
I
I
I
I
O
O
I
I
O
O
I
Description
Ground terminal
Power supply terminal (+1.5V)
Ground terminal
Ground terminal
System clock input terminal (16.9344 MHz)
System clock output terminal (16.9344 MHz)
Power supply terminal (+3.3V)
Power supply terminal (+3.3V)
Audio signal (L-ch) input from the electrical volume
Reference voltage output terminal
Reference voltage output terminal
Reference voltage output terminal
Audio signal (R-ch) input from the electrical volume
Ground terminal
Microprocessor interface mode selection signal input terminal
“L”: serial interface, “H”: parallel interface Fixed at “L” in this unit
Serial data input/output terminal Not used
Serial data output to the system controller
Serial data input from the system controller
Serial data transfer clock signal input from the system controller
Chip enable signal input from the system controller
Power supply terminal (+3.3V)
Ground terminal
Reset signal input from the system controller “L”: reset
Power supply terminal (+1.5V)
Interrupt signal output to the system controller
Request signal output to the system controller
Gate signal input from the system controller
Audio data input from the system controller
Bit clock signal input from the system controller
L/R sampling clock signal input from the system controller
Muting on/off control signal input from the system controller “L”: muting on
Zero data detection signal output to the system controller
Serial data output to the system controller
Serial data transfer clock signal input from the system controller
Test mode setting terminal Normally fixed at “L”
EFM and PLCK phase difference signal output terminal
TMAX detection result output terminal
PLL circuit low-pass filter amplifier inversion input terminal
39
MEX-M70BT
MAIN BOARD IC1301 PD720114GA-YEU-AT-SAK (USB CONTROLLER)
Pin No.
1
2
3 to 6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
40
Pin Name
VDD25OUT
VSSREG
LED4 to LED1
GREEN
AMBER
VDD33
X1
X2
VDD25
BUS_B
TEST
RREF
AVSS (R)
AVDD
AVSS
AVDD
VDD33
DMU
DPU
VSS
VDD25
DM1
DP1
VSS
DM2
DP2
VDD33
DM3
DP3
VDD25
DM4
DP4
VSS
SYSRSTB
PPB4
CSB4
PPB3
CSB3
VSS
PPB2
CSB2
PPB1
CSB1
VBUSM
VDD33REG
I/O
O
O
O
O
I
O
I
I
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I
I/O
I
I/O
I
I/O
I
I/O
I
I
I
Description
Internal regulator power supply voltage (+2.5V) output terminal
Ground terminal (for internal regulator)
LED drive signal output terminal Not used
LED (green color) control signal output terminal Not used
LED (amber color) control signal output terminal Not used
Power supply terminal (+3.3V)
System clock input terminal (30 MHz)
System clock output terminal (30 MHz)
Power supply terminal (+2.5V)
Power supply setting terminal Fixed at “H” in this unit
Test mode control signal input terminal Fixed at “L” in this unit
Reference resistor connection terminal
Ground terminal
Power supply terminal (+2.5V)
Ground terminal
Power supply terminal (+2.5V)
Power supply terminal (+3.3V)
Two-way USB data (–) bus with the system controller
Two-way USB data (+) bus with the system controller
Ground terminal
Power supply terminal (+2.5V)
Two-way USB data (–) bus with the USB connector
Two-way USB data (+) bus with the USB connector
Ground terminal
Two-way USB data (–) bus terminal Not used
Two-way USB data (+) bus terminal Not used
Power supply terminal (+3.3V)
Two-way USB data (–) bus terminal Not used
Two-way USB data (+) bus terminal Not used
Power supply terminal (+2.5V)
Two-way USB data (–) bus with the USB cable connector
Two-way USB data (+) bus with the USB cable connector
Ground terminal
Reset signal input terminal “L”: reset Fixed at “H” in this unit
Power control signal input/output terminal Not used
Over current detection signal input terminal Not used
Power control signal input/output terminal Not used
Over current detection signal input terminal Not used
Ground terminal
Power control signal input/output terminal Not used
Over current detection signal input terminal Not used
Power control signal input/output terminal Not used
Over current detection signal input terminal Not used
VBUS power monitor terminal
Internal regulator power supply voltage (+3.3V) input terminal
MEX-M70BT
Ver. 1.3
SECTION 6
EXPLODED VIEWS
Note:
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
• Items marked “*” are not stocked since
they are seldom required for routine service. Some delay should be anticipated
when ordering these items.
6-1.
• The mechanical parts with no reference
number in the exploded views are not supplied.
• Color Indication of Appearance Parts Example:
KNOB, BALANCE (WHITE) . . . (RED)


Parts Color Cabinet’s Color
SUB PANEL SECTION
1
not supplied
C
#2
B
CD mechanism deck section
(MG-101CF-188)
not supplied
#2
A
FU1
FFC1
PW1
#1
B
A
not supplied
NFC1
D
C
3
MIC1001
D
chassis section
#1
FP1
#1
5
4
Note 1: The service manual of the mechanism deck, used in this model
has been issued in a separate volume. Please refer to the service
manual of the MG-101 series for the mechanism deck information.
Note 2: When the knob (VOL) (SV) assy (Ref. No. NFC1) is replaced,
Bluetooth information writing is necessary. Refer to “BLUETOOTH INFORMATION WRITING METHOD” on page 8.
Ref. No.
#1
Part No.
Description
Remark
1
2
3
4
5
2-590-307-03
X-2587-191-1
2-898-980-02
3-250-543-21
2-683-516-01
SHEET, COVER
PANEL ASSY, SUB
HOLDER (MIC SLOT)
SCREW (+B P-TITE M2)
CAP (AUX)
FFC1
1-846-819-31
FFC1
1-846-819-41
CABLE FLEXIBLE FLAT (27 CORE)
(Length: 150 mm) (See Note 4)
CABLE FLEXIBLE FLAT (27 CORE)
(Length: 80 mm) (See Note 4)
2
Note 3: When the front panel (SV) (assy) (Ref. No. FP1) is replaced, the
Bluetooth information writing and affixing of label (serial number) is necessary. Refer to “AFFIXING OF LABEL (SERIAL
NUMBER)” and “BLUETOOTH INFORMATION WRITING
METHOD” on page 8.
Note 4: The length of cable flexible flat (27 core) has been changed
from 150 mm to 80 mm in the midway of production.
When replacing the part of Ref. No. FFC1, use the part of the
same length as before replacing.
Ref. No.
Part No.
Description
Remark
FP1
A-2037-605-A
FU1
1-523-227-11
MIC1001 1-542-919-11
PANEL (SV) (ASSY) FRONT (See Note 3)
MINI FUSE (BLADE TYPE) (10 A/32 V)
MICROPHONE
NFC1
PW1
#1
#2
KNOB (VOL) (SV) ASSY (See Note 2)
CONNECTION CABLE, AUTOMOBILE (POWER)
SCREW +PTT 2.6X6 (S)
SCREW +PTT 2.6X4 (S)
X-2588-698-1
1-846-979-11
7-685-792-09
7-685-790-01
41
MEX-M70BT
Ver. 1.3
6-2.
CHASSIS SECTION
Note 1: REGULATOR board has been deleted in the midway of production.
For details, please refer to service manual supplement-1.
CNC1
#3
#3
not supplied
54
#4
#5
#4
not supplied
not supplied
#4
MAIN
board
E
#5
#4
not supplied
not supplied
#3
53
D
E
53
not supplied
(REGULATOR board)
(See Note 1)
not supplied
#5
TU01
53
not supplied
52
not supplied
D
BT1
51
Note 2: When the complete MAIN board (Ref No. 54) is replaced, it is necessary
to replace knob (VOL) (SV) assy (Ref. No. NFC1: page 41) simultaneously. Also, the destination setting, Bluetooth operation check and Bluetooth
information writing is necessary. Refer to “DESTINATION SETTING
METHOD” on page 4, “BLUETOOTH FUNCTION CHECKING METHOD USING A CELLULAR PHONE” on page 7 and “BLUETOOTH INFORMATION WRITING METHOD” on page 8.
Ref. No.
Part No.
Description
51
52
53
54
3-042-244-01
4-548-823-01
4-410-504-01
A-2033-096-A
54
A-2033-096-B
SCREW (T)
SHEET HEAT TRANSFER
SCREW (+PTT 2.6X6), GROUND POINT
MAIN BOARD, COMPLETE (Former type)
(See Note 2, 3)
MAIN BOARD, COMPLETE (New type)
(See Note 2, 3)
42
Remark
Ref. No.
Note 3: Refer to “NEW/FORMER DISCRIMINATION” on
page 1 on service manual supplement-1 for how to
distinguish New/Former types.
Part No.
Description
BT1
CNC1
TU01
#3
#4
1-754-894-21
1-846-892-21
A-1946-531-A
7-685-793-01
7-685-794-01
BT, ANTENNA
CONNECTION CABLE (AUTOMOBILE) (
TUX-DSP03 (TUNER UNIT)
SCREW +PTT 2.6X8 (S)
SCREW +PTT 2.6X10 (S)
#5
7-685-134-19
SCREW +P 2.6X8 TYPE2 NON-SLIT
Remark
)
MEX-M70BT
SECTION 7
ELECTRICAL PARTS LIST
Note:
• Due to standardization, replacements in
the parts list may be different from the
parts specified in the diagrams or the components used on the set.
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
• Items marked “*” are not stocked since
they are seldom required for routine service. Some delay should be anticipated
when ordering these items.
• RESISTORS
All resistors are in ohms.
METAL: Metal-film resistor.
METAL OXIDE: Metal oxide-film resistor.
F: nonflammable
Ref. No.
Part No.
• CAPACITORS
uF: μF
• COILS
uH: μH
• SEMICONDUCTORS
In each case, u: μ, for example:
uA. . : μA. . , uPA. . , μPA. . ,
uPB. . : μPB. . , uPC. . , μPC. . ,
uPD. . : μPD. .
Description
Remark
KEY BOARD
**********
When the KEY board is defective, replace the FRONT PANEL (SV) (ASSY) (Ref.
No. FP1).
*************************************************************
A-2033-096-A
MAIN BOARD, COMPLETE (See Note)
********************
7-685-134-19
7-685-794-01
SCREW +P 2.6X8 TYPE2 NON-SLIT
SCREW +PTT 2.6X10 (S)
< CAPACITOR/RESISTOR >
Ref. No.
KEY
MAIN
When indicating parts by reference number, please include the board name.
Part No.
Description
Remark
C321
C322
1-114-813-11
1-114-813-11
CERAMIC CHIP 1uF
CERAMIC CHIP 1uF
10%
10%
16V
16V
C323
C324
C325
C326
C328
1-114-813-11
1-164-866-11
1-114-813-11
1-114-813-11
1-164-866-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
47PF
1uF
1uF
47PF
10%
5%
10%
10%
5%
16V
50V
16V
16V
50V
C329
C330
C331
C332
C333
1-118-347-11
1-164-866-11
1-164-866-11
1-118-361-11
1-164-866-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
47PF
47PF
0.1uF
47PF
10%
5%
5%
10%
5%
25V
50V
50V
50V
50V
* C03
C05
C09
C010
C013
1-116-738-11
1-118-386-11
1-116-707-11
1-114-813-11
1-118-361-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.1uF
47uF
1uF
0.1uF
10%
10%
20%
10%
10%
6.3V
16V
10V
16V
50V
C334
C335
C336
C337
C338
1-128-996-11
1-128-996-11
1-128-996-11
1-128-996-11
1-162-923-11
ELECT CHIP
ELECT CHIP
ELECT CHIP
ELECT CHIP
CERAMIC CHIP
4.7uF
4.7uF
4.7uF
4.7uF
47PF
20%
20%
20%
20%
5%
50V
50V
50V
50V
50V
C014
C015
C102
* C103
C104
1-114-813-11
1-115-416-11
1-116-733-11
1-116-738-11
1-118-290-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.001uF
1uF
1uF
0.001uF
10%
5%
10%
10%
10%
16V
25V
25V
6.3V
50V
C339
C340
C341
C342
C343
1-162-923-11
1-162-923-11
1-162-923-11
1-162-923-11
1-162-923-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47PF
47PF
47PF
47PF
47PF
5%
5%
5%
5%
5%
50V
50V
50V
50V
50V
C105
C106
* C107
C109
C301
1-118-477-11
1-118-290-11
1-116-738-11
1-118-347-11
1-164-866-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
2.2uF
0.001uF
1uF
0.1uF
47PF
10%
10%
10%
10%
5%
6.3V
50V
6.3V
25V
50V
C400
C401
C402
C404
C405
1-118-047-11
1-128-992-21
1-114-813-11
1-118-386-11
1-162-923-11
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10uF
47uF
1uF
0.1uF
47PF
10%
20%
10%
10%
5%
16V
25V
16V
16V
50V
C302
C303
C304
C305
C306
1-164-866-11
1-112-839-11
1-164-866-11
1-164-866-11
1-118-361-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47PF
4700uF
47PF
47PF
0.1uF
5%
20%
5%
5%
10%
50V
16V
50V
50V
50V
C406
* C407
C408
C409
C410
1-124-779-00
1-118-035-11
1-162-923-11
1-124-779-00
1-124-779-00
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
ELECT CHIP
10uF
0.1uF
47PF
10uF
10uF
20%
10%
5%
20%
20%
16V
25V
50V
16V
16V
C307
C308
C309
C310
C311
1-114-813-11
1-164-866-11
1-164-866-11
1-118-347-11
1-164-866-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
47PF
47PF
0.1uF
47PF
10%
5%
5%
10%
5%
16V
50V
50V
25V
50V
C411
C412
C413
C414
C415
1-162-923-11
1-100-966-91
1-118-386-11
1-162-923-11
1-116-865-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47PF
10uF
0.1uF
47PF
10uF
5%
20%
10%
5%
10%
50V
10V
16V
50V
25V
C313
C314
C315
C316
C317
1-164-866-11
1-118-930-11
1-164-866-11
1-114-813-11
1-114-813-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47PF
10uF
47PF
1uF
1uF
5%
10%
5%
10%
10%
50V
10V
50V
16V
16V
C416
C417
C418
C419
* C420
1-124-779-00
1-116-728-11
1-162-923-11
1-162-923-11
1-116-738-11
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10uF
2.2uF
47PF
47PF
1uF
20%
10%
5%
5%
10%
16V
10V
50V
50V
6.3V
C318
C319
C320
1-114-813-11
1-114-813-11
1-114-813-11
CERAMIC CHIP 1uF
CERAMIC CHIP 1uF
CERAMIC CHIP 1uF
10%
10%
10%
16V
16V
16V
* C421
* C422
C423
1-116-738-11
1-116-738-11
1-118-389-11
CERAMIC CHIP 1uF
CERAMIC CHIP 1uF
CERAMIC CHIP 0.022uF
10%
10%
10%
6.3V
6.3V
25V
Note: When the complete MAIN board is replaced, it is necessary to replace knob (VOL) (SV) assy simultaneously.
Also, the destination setting, Bluetooth operation check and Bluetooth information writing is necessary. Refer to
“DESTINATION SETTING METHOD” on page 4, “BLUETOOTH FUNCTION CHECKING METHOD USING
A CELLULAR PHONE” on page 7 and “BLUETOOTH INFORMATION WRITING METHOD” on page 8.
43
MEX-M70BT
MAIN
Ref. No.
Part No.
Description
Part No.
Description
C424
C425
1-118-389-11
1-116-728-11
CERAMIC CHIP 0.022uF
CERAMIC CHIP 2.2uF
10%
10%
25V
10V
C566
* C567
1-118-386-11
1-116-738-11
CERAMIC CHIP 0.1uF
CERAMIC CHIP 1uF
10%
10%
16V
6.3V
C441
C442
C443
C444
C445
1-164-866-11
1-164-866-11
1-164-866-11
1-164-866-11
1-164-866-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47PF
47PF
47PF
47PF
47PF
5%
5%
5%
5%
5%
50V
50V
50V
50V
50V
C568
C569
C570
C571
C702
1-115-416-11
1-118-361-11
1-118-477-11
1-118-361-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
0.1uF
2.2uF
0.1uF
0.1uF
5%
10%
10%
10%
10%
25V
50V
6.3V
50V
16V
C446
C501
C502
C503
C504
1-114-599-21
1-165-492-21
1-165-492-21
1-118-345-11
1-118-459-11
ELECT CHIP
ELECT CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
10uF
100uF
100uF
0.01uF
0.01uF
20%
20%
20%
10%
10%
35V
10V
10V
25V
25V
* C704
C705
* C706
* C707
C711
1-116-738-11
1-118-386-11
1-116-738-11
1-116-738-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.1uF
1uF
1uF
0.1uF
10%
10%
10%
10%
10%
6.3V
16V
6.3V
6.3V
16V
C505
C506
C507
C508
C509
1-118-386-11
1-118-386-11
1-118-386-11
1-118-290-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.001uF
0.1uF
10%
10%
10%
10%
10%
16V
16V
16V
50V
16V
C712
C714
C715
C716
C717
1-118-386-11
1-118-388-11
1-118-477-11
1-118-477-11
1-118-388-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.047uF
2.2uF
2.2uF
0.047uF
10%
10%
10%
10%
10%
16V
25V
6.3V
6.3V
25V
C510
C511
C512
C515
C516
1-118-386-11
1-118-386-11
1-118-386-11
1-118-386-11
1-165-908-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.1uF
1uF
10%
10%
10%
10%
10%
16V
16V
16V
16V
10V
* C718
C719
C720
* C721
C722
1-118-407-11
1-118-386-11
1-116-707-11
1-118-407-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
470PF
0.1uF
47uF
470PF
0.1uF
10%
10%
20%
10%
10%
50V
16V
10V
50V
16V
C517
C518
C519
C520
C521
1-118-386-11
1-164-847-11
1-118-386-11
1-118-386-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
7PF
0.1uF
0.1uF
0.1uF
10%
0.5PF
10%
10%
10%
16V
50V
16V
16V
16V
C723
C725
C727
C728
C729
1-118-459-11
1-118-403-11
1-118-386-11
1-118-386-11
1-165-908-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.001uF
0.1uF
0.1uF
1uF
10%
10%
10%
10%
10%
25V
50V
16V
16V
10V
C522
C523
C524
C525
C526
1-164-848-11
1-118-386-11
1-164-850-11
1-118-386-11
1-116-711-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
8PF
0.1uF
10PF
0.1uF
22uF
0.5PF
10%
0.5PF
10%
20%
50V
16V
50V
16V
16V
C730
C731
C732
C734
C735
1-118-386-11
1-116-733-11
1-118-386-11
1-118-394-11
1-127-772-81
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
1uF
0.1uF
0.0056uF
0.033uF
10%
10%
10%
10%
10%
16V
25V
16V
50V
10V
C527
C528
C529
C530
C531
1-118-386-11
1-164-850-11
1-118-386-11
1-116-711-11
1-164-854-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
10PF
0.1uF
22uF
15PF
10%
0.5PF
10%
20%
5%
16V
50V
16V
16V
50V
C736
C737
C738
C739
C740
1-115-416-11
1-118-397-11
1-118-397-11
1-118-397-11
1-118-397-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
0.0033uF
0.0033uF
0.0033uF
0.0033uF
5%
10%
10%
10%
10%
25V
50V
50V
50V
50V
C532
C533
C534
C535
C536
1-118-386-11
1-164-854-11
1-116-711-11
1-118-386-11
1-116-711-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
15PF
22uF
0.1uF
22uF
10%
5%
20%
10%
20%
16V
50V
16V
16V
16V
C741
C742
C743
C744
C745
1-118-397-11
1-118-386-11
1-124-778-00
1-128-996-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
ELECT CHIP
CERAMIC CHIP
0.0033uF
0.1uF
22uF
4.7uF
0.1uF
10%
10%
20%
20%
10%
50V
16V
6.3V
50V
16V
C537
C538
C539
C540
C541
1-118-386-11
1-118-386-11
1-118-386-11
1-118-386-11
1-116-737-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.1uF
1uF
10%
10%
10%
10%
20%
16V
16V
16V
16V
10V
C746
C747
C748
C749
C750
1-128-996-11
1-118-386-11
1-128-996-11
1-165-908-11
1-128-996-11
ELECT CHIP
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
ELECT CHIP
4.7uF
0.1uF
4.7uF
1uF
4.7uF
20%
10%
20%
10%
20%
50V
16V
50V
10V
50V
C543
C544
C545
C546
C547
1-118-386-11
1-118-386-11
1-118-386-11
1-118-386-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
16V
16V
16V
16V
16V
C751
C754
C755
C756
C758
1-116-728-11
1-118-386-11
1-118-403-11
1-164-852-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
2.2uF
0.1uF
0.001uF
12PF
0.1uF
10%
10%
10%
5%
10%
10V
16V
50V
50V
16V
C548
C549
C550
C551
C553
1-118-386-11
1-118-386-11
1-118-386-11
1-118-386-11
1-216-833-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
METAL CHIP
0.1uF
0.1uF
0.1uF
0.1uF
10K
10%
10%
10%
10%
5%
16V
16V
16V
16V
1/10W
C759
C760
C761
C762
C763
1-118-386-11
1-127-988-81
1-118-386-11
1-100-579-81
1-164-852-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.015uF
0.1uF
0.0056uF
12PF
10%
10%
10%
10%
5%
16V
16V
16V
25V
50V
C559
C560
C564
1-164-940-11
1-116-707-11
1-100-354-21
CERAMIC CHIP 0.0033uF
CERAMIC CHIP 47uF
ELECT CHIP
220uF
10%
20%
20%
16V
10V
6.3V
C764
C765
C766
1-118-345-11
1-118-477-11
1-118-399-11
CERAMIC CHIP 0.01uF
CERAMIC CHIP 2.2uF
CERAMIC CHIP 0.0022uF
10%
10%
10%
25V
6.3V
50V
44
Remark
Ref. No.
Remark
MEX-M70BT
MAIN
Ref. No.
Part No.
Description
Part No.
Description
C767
C768
1-118-386-11
1-118-459-11
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.01uF
10%
10%
16V
25V
Remark
Ref. No.
C848
C850
1-118-929-11
1-118-359-11
CERAMIC CHIP 47uF
CERAMIC CHIP 10uF
10%
10%
16V
16V
Remark
C769
C770
C771
C772
C773
1-116-728-11
1-118-459-11
1-118-386-11
1-118-477-11
1-116-728-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
2.2uF
0.01uF
0.1uF
2.2uF
2.2uF
10%
10%
10%
10%
10%
10V
25V
16V
6.3V
10V
C861
C865
C866
C867
* C872
1-116-716-11
1-118-929-11
1-118-929-11
1-100-769-21
1-118-407-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
10uF
47uF
47uF
470uF
470PF
10%
10%
10%
20%
10%
16V
16V
16V
16V
50V
C775
C777
C779
C780
C781
1-116-728-11
1-116-728-11
1-116-728-11
1-118-399-11
1-118-399-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
2.2uF
2.2uF
2.2uF
0.0022uF
0.0022uF
10%
10%
10%
10%
10%
10V
10V
10V
50V
50V
C874
C875
C876
C878
C1004
1-162-923-11
1-116-716-11
1-118-359-11
1-116-728-11
1-116-737-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47PF
10uF
10uF
2.2uF
1uF
5%
10%
10%
10%
20%
50V
16V
16V
10V
10V
C782
C783
C786
C787
C788
1-118-386-11
1-127-988-81
1-165-908-11
1-118-386-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.015uF
1uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
16V
16V
10V
16V
16V
C1005
C1006
C1008
C1009
* C1010
1-116-707-11
1-118-386-11
1-118-040-11
1-118-040-11
1-116-738-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47uF
0.1uF
2.2uF
2.2uF
1uF
20%
10%
10%
10%
10%
10V
16V
16V
16V
6.3V
C790
C793
C801
C803
C804
1-118-386-11
1-164-866-11
1-118-929-11
1-118-290-11
1-118-290-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
47PF
47uF
0.001uF
0.001uF
10%
5%
10%
10%
10%
16V
50V
16V
50V
50V
* C1011
* C1012
C1013
* C1014
C1016
1-116-738-11
1-116-738-11
1-118-388-11
1-116-738-11
1-116-716-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
1uF
0.047uF
1uF
10uF
10%
10%
10%
10%
10%
6.3V
6.3V
25V
6.3V
16V
C805
C806
C807
C809
C810
1-118-405-11
1-118-386-11
1-118-403-11
1-118-393-11
1-164-850-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
680PF
0.1uF
0.001uF
0.0068uF
10PF
10%
10%
10%
10%
0.5PF
50V
16V
50V
50V
50V
C1017
C1018
C1019
C1050
C1052
1-118-403-11
1-116-724-11
1-116-741-11
1-118-290-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
4.7uF
0.47uF
0.001uF
0.1uF
10%
20%
20%
10%
10%
50V
6.3V
10V
50V
16V
C811
C812
C813
C814
C815
1-164-874-11
1-114-813-11
1-116-712-11
1-135-366-11
1-118-359-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
100PF
1uF
22uF
100uF
10uF
5%
10%
10%
20%
10%
50V
16V
10V
16V
16V
C1054
C1094
C1301
C1303
C1304
1-118-290-11
1-118-386-11
1-118-932-11
1-118-932-11
1-116-733-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
0.1uF
10uF
10uF
1uF
10%
10%
10%
10%
10%
50V
16V
16V
16V
25V
C816
C817
C818
C819
C820
1-164-874-11
1-118-386-11
1-118-359-11
1-118-359-11
1-116-740-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
100PF
0.1uF
10uF
10uF
0.47uF
5%
10%
10%
10%
10%
50V
16V
16V
16V
16V
C1306
C1307
C1308
C1309
C1310
1-118-929-11
1-118-931-11
1-162-963-11
1-118-391-11
1-135-366-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
47uF
22uF
680PF
0.01uF
100uF
10%
10%
10%
10%
20%
16V
10V
50V
50V
16V
C821
C822
* C823
C825
C827
1-116-716-11
1-116-716-11
1-116-738-11
1-118-386-11
1-114-813-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10uF
10uF
1uF
0.1uF
1uF
10%
10%
10%
10%
10%
16V
16V
6.3V
16V
16V
C1312
C1313
C1314
C1315
C1316
1-118-459-11
1-100-055-21
1-162-915-11
1-162-915-11
1-118-391-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
22uF
10PF
10PF
0.01uF
10%
20%
0.5PF
0.5PF
10%
25V
16V
50V
50V
50V
C828
* C829
* C830
C831
C832
1-114-813-11
1-118-407-11
1-118-407-11
1-100-769-21
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
1uF
470PF
470PF
470uF
0.1uF
10%
10%
10%
20%
10%
16V
50V
50V
16V
16V
C1317
C1318
C1320
C1321
C1322
1-118-386-11
1-118-278-91
1-100-159-91
1-118-386-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
2.2uF
22uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
16V
10V
6.3V
16V
16V
C833
C834
C835
C837
C838
1-118-386-11
1-118-359-11
1-100-769-21
1-100-769-21
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
ELECT CHIP
CERAMIC CHIP
0.1uF
10uF
470uF
470uF
0.1uF
10%
10%
20%
20%
10%
16V
16V
16V
16V
16V
C1323
C1324
* C1325
C1326
C1327
1-118-480-11
1-116-737-11
1-116-738-11
1-118-386-11
1-118-480-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
4.7uF
1uF
1uF
0.1uF
4.7uF
10%
20%
10%
10%
10%
6.3V
10V
6.3V
16V
6.3V
C839
C840
C841
C843
C844
1-164-878-11
1-116-739-11
1-116-739-11
1-118-403-11
1-100-764-21
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
150PF
0.47uF
0.47uF
0.001uF
4.7uF
5%
10%
10%
10%
20%
50V
50V
50V
50V
25V
C1328
C1329
C1330
C1331
C1332
1-118-480-11
1-118-386-11
1-116-707-11
1-116-737-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
4.7uF
0.1uF
47uF
1uF
0.1uF
10%
10%
20%
20%
10%
6.3V
16V
10V
10V
16V
C845
C846
C847
1-114-813-11
1-116-716-11
1-118-955-11
CERAMIC CHIP 1uF
CERAMIC CHIP 10uF
CERAMIC CHIP 22uF
10%
10%
20%
16V
16V
16V
C1333
C1334
C1336
1-118-386-11
1-118-386-11
1-162-923-11
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.1uF
CERAMIC CHIP 47PF
10%
10%
5%
16V
16V
50V
45
MEX-M70BT
Ver. 1.1
MAIN
Ref. No.
Part No.
Description
Part No.
Description
C1337
C1338
1-118-386-11
1-162-923-11
CERAMIC CHIP 0.1uF
CERAMIC CHIP 47PF
10%
5%
16V
50V
Remark
FB703
FB801
1-469-084-21
1-500-113-22
INDUCTOR, FERRITE BEAD (1005)
BEAD, FERRITE (CHIP) (1608)
C1339
C1341
C1342
* C1344
C1353
1-118-045-11
1-118-403-11
1-118-403-11
1-116-738-11
1-118-361-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10%
10%
10%
10%
10%
25V
50V
50V
6.3V
50V
FB802
FB803
FB804
FB805
FB1003
1-500-113-22
1-500-113-22
1-500-113-22
1-500-113-22
1-500-113-22
BEAD, FERRITE (CHIP) (1608)
BEAD, FERRITE (CHIP) (1608)
BEAD, FERRITE (CHIP) (1608)
BEAD, FERRITE (CHIP) (1608)
BEAD, FERRITE (CHIP) (1608)
C1358
1-162-966-91
CERAMIC CHIP 0.0022uF
10%
50V
FB1004
FB1005
FB1300
FB1301
1-500-113-22
1-500-113-22
1-469-094-21
1-469-094-21
BEAD, FERRITE (CHIP) (1608)
BEAD, FERRITE (CHIP) (1608)
FERRITE, EMI (SMD) (1608)
FERRITE, EMI (SMD) (1608)
2.2uF
0.001uF
0.001uF
1uF
0.1uF
< CONNECTOR >
CN101
CN301
CN502
CN701
CN801
1-842-266-22
1-843-330-11
1-779-806-21
1-843-775-11
1-779-886-11
SOCKET, CONNECTOR 20P
PIN, CONNECTOR 16P
CONNECTOR 8P
CONNECTOR, FFC/FPC (ZIF) 27P
SOCKET, MINIATURE DIN CONNECTOR
(SIRIUSXM IN)
CN1001
CN1002
CN1004
CN1300
1-785-125-21
1-821-559-11
1-784-650-21
1-779-993-11
CONNECTOR 6P
CONNECTOR, COAXIAL (SMT TYPE)
CONNECTOR 2P
PIN, CONNECTOR (PWB) 5P
< DIODE >
D114
D301
D303
D304
D401
6-502-969-01
6-503-548-01
6-503-238-01
6-502-961-01
6-502-961-01
DIODE
DIODE
DIODE
DIODE
DIODE
DZ2J06800L
DB2441600L
GN1G
DA2J10100L
DA2J10100L
D501
D502
D801
D802
D805
6-503-759-01
6-503-759-01
6-504-041-01
6-502-972-01
6-503-031-01
DIODE
DIODE
DIODE
DIODE
DIODE
RB751V40, 115
RB751V40, 115
RB050L-60
DZ2J09100L
DZ2J18000L
* D806
D808
D809
D811
D812
6-503-973-01
6-503-031-01
6-503-031-01
6-503-031-01
6-503-238-01
DIODE
DIODE
DIODE
DIODE
DIODE
RSX205L-30TE25
DZ2J18000L
DZ2J18000L
DZ2J18000L
GN1G
D813
D814
D816
D817
D818
6-503-031-01
6-502-961-01
6-504-047-01
6-503-016-01
6-503-031-01
DIODE
DIODE
DIODE
DIODE
DIODE
DZ2J18000L
DA2J10100L
RSX051VA-30
DZ2J07500L
DZ2J18000L
6-502-969-01
6-502-969-01
6-502-969-01
6-503-973-01
6-503-759-01
DIODE
DIODE
DIODE
DIODE
DIODE
DZ2J06800L
DZ2J06800L
DZ2J06800L
RSX205L-30TE25
RB751V40, 115
D1001
D1002
D1003
* D1300
D1306
< FUSE >
F801
1-576-415-11
Ref. No.
< IC/BT MODULE >
IC301
IC401
IC402
IC501
IC502
6-720-774-01
6-721-140-01
6-721-168-01
6-719-855-01
6-721-462-01
IC
IC
IC
IC
IC
PURE5001H-4WX
NJW4190R-A (TE2)
BD3468FV-E2
BU4228F-STR
MX25L3235EM2I-10G-A01 (for SERVICE)
(See Note 1)
IC503
IC504
IC702
IC703
IC704
6-721-336-01
6-710-376-01
6-717-694-01
6-716-355-01
6-716-355-01
IC
IC
IC
IC
IC
R7S7200022CFP
74LVC1G17GW-125
BU33TD3WG-TR
BU15TD3WG-TR
BU15TD3WG-TR
IC705
IC801
IC802
IC803
IC804
6-715-712-11
6-709-182-01
6-710-376-01
6-721-184-01
(Not supplied)
IC
IC
IC
IC
IC
TC94A99FG-003 (SYCH
TC7WH126FK
74LVC1G17GW-125
BD49100RFS-E2
BD60HA5WEFJ-E2 (See Note 2)
IC1001
IC1002
IC1003
IC1009
IC1051
6-717-694-01
(Not supplied)
6-703-863-01
6-718-324-01
6-716-858-01
IC BU33TD3WG-TR
BT MODULE (WB113C) (See Note 2)
IC NJM2781RB1
IC MFI337S3959
IC NLASB3157DFT2G
IC1300
IC1301
IC1302
6-718-913-01
6-718-416-01
6-717-694-01
IC OZ539IGN-A1-0-TR
IC uPD720114GA-YEU-AT-SAK
IC BU33TD3WG-TR
< JACK >
J001
J401
J801
J1001
1-843-791-11
1-822-714-21
1-566-822-81
1-566-822-91
JACK (ANT) (ANTENNA IN)
JACK, PIN 6P (FRONT/REAR/SUB AUDIO OUT)
JACK (REMOTE IN)
JACK (MIC)
< COIL >
L01
L301
L401
L501
L502
1-400-073-21
1-456-617-11
1-469-844-11
1-414-842-21
1-414-842-21
INDUCTOR
COIL, CHOKE
INDUCTOR
INDUCTOR
INDUCTOR
4.7uH
L504
L505
L801
L802
L1301
1-400-073-21
1-400-073-21
1-460-704-11
1-481-904-11
1-481-904-11
INDUCTOR
INDUCTOR
COIL, CHOKE
INDUCTOR
INDUCTOR
4.7uH
4.7uH
22uH
47uH
47uH
L1302
L1303
L1304
L1305
L1307
1-414-842-21
1-414-842-21
1-414-842-21
1-414-842-21
1-457-223-11
INDUCTOR
15nH
INDUCTOR
15nH
INDUCTOR
15nH
INDUCTOR
15nH
COMMON MODE CHOKE COIL
2.2uH
15nH
15nH
FUSE (2 A/32 V)
< FERRITE BEAD >
FB02
FB101
FB302
FB404
FB501
1-400-334-21
1-500-113-22
1-481-746-11
1-500-113-22
1-500-113-22
FERRITE, EMI (SMD) (1608)
BEAD, FERRITE (CHIP) (1608)
SDM EMI FERRITE
BEAD, FERRITE (CHIP) (1608)
BEAD, FERRITE (CHIP) (1608)
FB504
FB505
FB702
1-500-113-22
1-400-823-11
1-469-084-21
BEAD, FERRITE (CHIP) (1608)
EMI FERRITE (SMD) (1005)
INDUCTOR, FERRITE BEAD (1005)
Note 1: When IC502 on the MAIN board is replaced, the destination
setting is necessary. Refer to “DESTINATION SETTING
METHOD” on page 4.
46
Remark
Note 2: IC804 and IC1002 on the MAIN board cannot replace
with single. When these parts are damaged, replace
the complete mounted board.
MEX-M70BT
MAIN
Ref. No.
Part No.
Description
Remark
< TRANSISTOR >
Q401
Q402
Q403
Q404
Q405
6-552-936-01
6-552-922-01
6-552-856-01
6-552-856-01
6-552-856-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
LTC014EUBFS8TL
LTA014EUBFS8TL
LTC914TUBFS8TL
LTC914TUBFS8TL
LTC914TUBFS8TL
Q406
Q407
Q408
Q701
Q801
6-552-856-01
6-552-856-01
6-552-856-01
6-551-120-01
6-552-936-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
LTC914TUBFS8TL
LTC914TUBFS8TL
LTC914TUBFS8TL
2SA2119K
LTC014EUBFS8TL
Q802
Q803
Q805
Q806
Q807
6-552-922-01
6-553-498-01
6-553-497-01
6-552-892-01
6-552-892-01
TRANSISTOR
FET
FET
TRANSISTOR
TRANSISTOR
LTA014EUBFS8TL
NTTFS5116PLTWG
NVTFS5124PLTWG
LSCR523UBFS8TL
LSCR523UBFS8TL
Q808
Q810
Q811
Q812
Q813
6-552-922-01
6-553-496-01
6-553-496-01
6-552-949-01
6-552-936-01
TRANSISTOR
FET
FET
TRANSISTOR
TRANSISTOR
LTA014EUBFS8TL
RSD046P05TL
RSD046P05TL
LTC044EUBFS8TL
LTC014EUBFS8TL
Q814
6-552-892-01
TRANSISTOR
LSCR523UBFS8TL
< RESISTOR >
R02
R09
R10
R11
R012
1-216-864-11
1-218-953-11
1-218-990-81
1-218-941-81
1-216-864-11
SHORT CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
SHORT CHIP
0
1K
0
100
0
R21
R102
R103
R104
R105
1-216-864-11
1-216-864-11
1-216-825-11
1-216-817-11
1-218-966-11
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
0
2.2K
470
12K
R107
R108
R301
R302
R303
1-218-966-11
1-216-817-11
1-216-214-00
1-216-864-11
1-218-965-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
12K
470
4.7K
0
10K
R304
R305
R306
R307
R308
1-216-864-11
1-218-953-11
1-218-953-11
1-218-953-11
1-218-953-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
1K
1K
1K
1K
R309
R310
R311
R312
R315
1-218-943-11
1-218-973-11
1-216-864-11
1-218-973-11
1-216-833-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
R316
R317
R318
R319
R320
1-250-515-11
1-216-833-11
1-250-515-11
1-250-515-11
1-216-833-11
R321
R322
R323
R401
R404
1-250-515-11
1-216-833-11
1-218-990-81
1-218-933-11
1-208-939-11
5%
1/16W
5%
1/16W
Ref. No.
Part No.
Description
R406
R407
R408
R409
R410
1-216-864-11
1-216-296-11
1-216-296-11
1-216-296-11
1-216-295-91
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
0
0
0
0
0
Remark
R411
R412
R413
R414
R415
1-250-519-11
1-216-296-11
1-250-600-11
1-250-656-11
1-250-515-11
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
0
220
47K
6.8K
R416
R417
R420
R421
R422
1-216-864-11
1-250-656-11
1-250-519-11
1-250-600-11
1-250-600-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
47K
10K
220
220
R423
R424
R425
R426
R427
1-250-656-11
1-218-990-81
1-218-990-81
1-218-990-81
1-218-990-81
METAL CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
47K
0
0
0
0
R428
R429
R430
R431
R432
1-218-990-81
1-218-990-81
1-218-990-81
1-218-990-81
1-250-656-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
R433
R434
R435
R436
R437
1-250-600-11
1-250-600-11
1-250-656-11
1-250-656-11
1-218-953-11
R438
R439
R440
R501
R502
1%
1/16W
1%
1%
1%
1/10W
1/10W
1/16W
1%
1%
1%
1%
1/10W
1/16W
1/10W
1/10W
1%
1/10W
0
0
0
0
47K
1%
1/10W
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
220
220
47K
47K
1K
1%
1%
1%
1%
5%
1/10W
1/10W
1/10W
1/10W
1/16W
1-250-600-11
1-218-990-81
1-218-990-81
1-218-941-81
1-218-941-81
METAL CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
220
0
0
100
100
1%
1/10W
5%
5%
1/16W
1/16W
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
1-216-864-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
100
100
100
100
0
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
5%
5%
5%
1/10W
1/10W
1/16W
5%
5%
5%
1/16W
1/10W
1/8W
5%
1/16W
R503
R504
R505
R506
R507
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R509
R510
R511
R512
R513
1-218-941-81
1-218-953-11
1-218-953-11
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
1K
1K
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
150
47K
0
47K
10K
5%
5%
1/16W
1/16W
5%
5%
1/16W
1/10W
R514
R515
R516
R517
R519
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
6.8K
10K
6.8K
6.8K
10K
1%
5%
1%
1%
5%
1/16W
1/10W
1/16W
1/16W
1/10W
R520
R521
R522
R523
R524
1-218-941-81
1-218-977-11
1-218-941-81
1-218-977-11
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100K
100
100K
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
6.8K
10K
0
22
150K
1%
5%
1/16W
1/10W
METAL CHIP
METAL CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
100
100
0
0
100K
1/16W
1/16W
1/16W
1/16W
1-218-941-81
1-218-941-81
1-218-990-81
1-218-990-81
1-218-977-11
5%
5%
5%
0.5%
R525
R526
R527
R528
R529
5%
1/16W
47
MEX-M70BT
MAIN
Ref. No.
Part No.
Description
R533
R534
R535
R538
R539
1-218-990-81
1-218-957-11
1-218-957-11
1-218-957-11
1-218-957-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
2.2K
2.2K
2.2K
2.2K
Remark
5%
5%
5%
5%
R540
R541
R542
R544
R545
1-218-971-81
1-218-977-11
1-218-941-81
1-218-971-81
1-218-965-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
33K
100K
100
33K
10K
R546
R547
R548
R549
R550
1-218-965-11
1-218-965-11
1-218-965-11
1-218-977-11
1-218-990-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
R551
R552
R553
R554
R555
1-216-809-11
1-218-949-11
1-218-941-81
1-216-809-11
1-216-809-11
R556
R557
R558
R559
R560
Ref. No.
Part No.
Description
1/16W
1/16W
1/16W
1/16W
R608
R609
R610
R611
R612
1-218-990-81
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
100
100
100
100
Remark
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R613
R614
R615
R616
R617
1-218-977-11
1-218-977-11
1-218-977-11
1-218-990-81
1-218-977-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
10K
10K
10K
100K
0
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R618
R619
R621
R622
R623
1-218-941-81
1-218-941-81
1-218-953-11
1-218-941-81
1-218-953-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
470
100
100
100
5%
5%
5%
5%
5%
1/10W
1/16W
1/16W
1/10W
1/10W
R624
R625
R626
R627
R628
1-216-809-11
1-218-941-81
1-218-977-11
1-218-977-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100K
100K
100K
5%
5%
5%
5%
5%
1/10W
1/16W
1/16W
1/16W
1/10W
R561
R562
R563
R565
R566
1-218-941-81
1-250-519-11
1-250-519-11
1-218-949-11
1-250-519-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
10K
10K
470
10K
5%
1%
1%
5%
1%
R567
R568
R571
R572
R573
1-218-990-81
1-218-990-81
1-218-990-81
1-218-977-11
1-218-977-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
0
0
0
100K
100K
R574
R576
R578
R579
R582
1-218-990-81
1-218-977-11
1-218-941-81
1-250-553-11
1-218-977-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
* R583
R585
R586
R587
R590
1-250-513-11
1-218-977-11
1-218-977-11
1-218-941-81
1-218-941-81
R591
R592
R593
R594
R597
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
100K
100K
100K
0
100K
5%
5%
5%
1/16W
1/16W
1/16W
5%
1/16W
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
1K
100
1K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
1-218-941-81
1-218-941-81
1-218-977-11
1-218-941-81
1-218-953-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100K
100
1K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R629
R630
R631
R632
R633
1-218-941-81
1-218-941-81
1-218-965-11
1-218-965-11
1-218-965-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
10K
10K
10K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
1/16W
R634
R635
R637
R638
R639
1-218-941-81
1-218-977-11
1-218-977-11
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100K
100K
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
5%
5%
1/16W
1/16W
R640
R641
R642
R643
R644
1-218-977-11
1-218-977-11
1-218-941-81
1-218-977-11
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
100
100K
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
0
100K
100
270K
100K
5%
5%
1%
5%
1/16W
1/16W
1/16W
1/16W
R646
R647
R648
R649
R650
1-218-965-11
1-218-977-11
1-218-977-11
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
100K
100K
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
5.6K
100K
100K
100
100
1%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R651
R652
R653
R654
R655
1-218-941-81
1-218-941-81
1-218-957-11
1-218-990-81
1-216-864-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
SHORT CHIP
100
100
2.2K
0
0
5%
5%
5%
1/16W
1/16W
1/16W
1-218-977-11
1-218-977-11
1-218-941-81
1-218-990-81
1-218-981-81
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
100K
100K
100
0
220K
5%
5%
5%
1/16W
1/16W
1/16W
5%
1/16W
R656
R657
R658
R659
R660
1-218-941-81
1-218-977-11
1-218-941-81
1-216-833-11
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100K
100
10K
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/10W
1/16W
R598
R599
R600
R601
R602
1-218-977-11
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100
100
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R662
R665
R666
R680
R681
1-218-965-11
1-218-941-81
1-216-296-11
1-218-941-81
1-218-977-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
10K
100
0
100
100K
5%
5%
1/16W
1/16W
5%
5%
1/16W
1/16W
R603
R604
R605
R606
R607
1-218-941-81
1-218-941-81
1-218-977-11
1-218-977-11
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100K
100K
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R682
R683
R684
R701
R702
1-218-977-11
1-218-990-81
1-216-295-91
1-216-864-11
1-218-990-81
METAL CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
100K
0
0
0
0
5%
1/16W
48
MEX-M70BT
MAIN
Ref. No.
Part No.
Description
R703
R704
R705
R706
R707
1-216-864-11
1-216-864-11
1-218-990-81
1-216-864-11
1-216-864-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
0
0
0
0
0
Remark
R708
R709
R711
R712
R714
1-216-864-11
1-218-953-11
1-216-864-11
1-242-967-11
1-208-637-11
SHORT CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
0
1K
0
1
12
R715
R717
R718
R719
R720
1-216-864-11
1-218-990-81
1-218-941-81
1-218-941-81
1-218-990-81
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
0
0
100
100
0
R721
R722
R723
R724
R725
1-218-941-81
1-218-941-81
1-218-941-81
1-218-947-11
1-218-947-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
R726
R727
R728
R729
R731
1-218-969-11
1-218-990-81
1-218-969-11
1-218-947-11
1-216-864-11
R732
R733
R734
R735
R737
5%
1/16W
5%
0.5%
1/16W
1/16W
Part No.
Description
* R810
R811
R812
R813
R814
Ref. No.
1-250-523-11
1-218-990-81
1-218-941-81
1-216-821-11
1-218-966-11
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
15K
0
100
1K
12K
Remark
R815
R816
R817
R818
R819
1-257-321-11
1-257-321-11
1-216-864-11
1-218-966-11
1-216-845-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
0.039
0.039
0
12K
100K
R821
R822
R823
R825
R826
1-216-821-11
1-250-602-11
1-250-632-11
1-208-923-11
1-208-946-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1%
1/16W
5%
5%
5%
1/16W
1/10W
1/16W
1%
1%
1/2W
1/2W
5%
5%
1/16W
1/10W
1K
270
4.7K
33K
300K
5%
1%
1%
0.5%
0.5%
1/10W
1/10W
1/10W
1/16W
1/16W
5%
5%
1/16W
1/16W
100
100
100
330
330
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R827
R828
R829
R830
R831
1-250-557-11
1-250-541-11
1-216-809-11
1-250-533-11
1-218-977-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
390K
82K
100
39K
100K
1%
1%
5%
1%
5%
1/16W
1/16W
1/10W
1/16W
1/16W
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
22K
0
22K
330
0
5%
1/16W
5%
5%
1/16W
1/16W
R832
R833
R834
* R835
R836
1-250-495-11
1-250-495-11
1-216-809-11
1-250-540-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
1K
100
75K
100
1%
1%
5%
1%
5%
1/16W
1/16W
1/10W
1/16W
1/10W
1-218-947-11
1-218-990-81
1-218-990-81
1-218-947-11
1-218-990-81
METAL CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
SHORT CHIP
330
0
0
330
0
5%
1/16W
5%
1/16W
R837
* R838
R839
* R840
R841
1-216-839-11
1-250-545-11
1-250-563-11
1-250-545-11
1-218-977-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
33K
120K
680K
120K
100K
5%
1%
1%
1%
5%
1/10W
1/16W
1/16W
1/16W
1/16W
* R738
R739
R740
R741
R742
1-250-503-11
1-218-989-11
1-218-941-81
1-218-958-11
1-218-958-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
2.2K
1M
100
2.7K
2.7K
1%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R842
R845
R846
R848
R849
1-218-990-81
1-218-990-81
1-250-495-11
1-216-801-11
1-218-972-11
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
0
1K
22
39K
1%
5%
5%
1/16W
1/10W
1/16W
R743
R744
R745
R747
R748
1-218-965-11
1-218-965-11
1-218-990-81
1-218-977-11
1-218-983-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
10K
10K
0
100K
330K
5%
5%
1/16W
1/16W
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
68K
0
10K
2.7K
100K
1/16W
1/16W
1/16W
1-218-975-11
1-218-990-81
1-250-519-11
1-208-897-81
1-250-543-11
5%
5%
5%
R850
R851
R852
R853
* R854
1%
0.5%
1%
1/16W
1/16W
1/16W
R749
R750
R751
R752
R753
1-218-977-11
1-218-967-11
1-216-841-11
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
15K
47K
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/10W
1/16W
1/16W
R856
R857
R858
R859
R860
1-216-073-91
1-218-973-11
1-218-961-11
1-216-073-91
1-218-973-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
47K
4.7K
10K
47K
5%
5%
5%
5%
5%
1/10W
1/16W
1/16W
1/10W
1/16W
R754
R755
R756
R757
R758
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
1-218-977-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R861
R862
R863
R865
R868
1-218-969-11
1-218-977-11
1-218-990-81
1-208-948-11
1-216-821-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
22K
100K
0
360K
1K
5%
5%
1/16W
1/16W
0.5%
5%
1/16W
1/10W
R760
R761
R762
R763
R803
1-218-977-11
1-218-977-11
1-216-845-11
1-218-977-11
1-250-525-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
100K
100K
18K
5%
5%
5%
5%
1%
1/16W
1/16W
1/10W
1/16W
1/16W
R869
R870
R871
R872
R878
1-216-821-11
1-250-495-11
1-248-473-11
1-245-453-11
1-216-296-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
1K
1K
0.068
0.047
0
5%
1%
1%
1%
1/10W
1/16W
1/2W
1/2W
* R805
R806
* R807
R808
R809
1-250-543-11
1-218-977-11
1-250-529-11
1-250-640-11
1-250-640-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
27K
10K
10K
1%
5%
1%
1%
1%
1/16W
1/16W
1/16W
1/10W
1/10W
R888
R890
R892
R894
R1001
1-216-864-11
1-216-864-11
1-216-864-11
1-218-974-11
1-216-296-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
SHORT CHIP
0
0
0
56K
0
5%
1/16W
49
MEX-M70BT
Ver. 1.3
MAIN REGULATOR
Ref. No.
Part No.
Description
R1002
R1003
R1004
R1005
R1006
1-216-296-11
1-218-977-11
1-218-941-81
1-218-941-81
1-218-941-81
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
100K
100
100
100
Remark
R1007
R1010
R1011
R1012
R1013
1-218-990-81
1-218-990-81
1-218-990-81
1-216-864-11
1-218-990-81
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
0
0
0
0
0
R1014
R1015
R1016
R1017
R1018
1-218-941-81
1-218-933-11
1-216-809-11
1-218-933-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
22
100
22
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/10W
1/16W
1/10W
R1019
R1020
R1021
R1023
R1024
1-218-941-81
1-216-809-11
1-216-809-11
1-218-941-81
1-218-977-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100K
5%
5%
5%
5%
5%
1/16W
1/10W
1/10W
1/16W
1/16W
R1025
R1028
R1029
R1030
R1031
1-218-941-81
1-218-990-81
1-218-990-81
1-218-941-81
1-218-957-11
METAL CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
100
0
0
100
2.2K
5%
1/16W
R1032
R1033
R1035
R1036
R1037
1-218-965-11
1-218-967-11
1-218-990-81
1-218-951-11
1-218-937-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
10K
15K
0
680
47
R1040
R1052
R1055
R1056
R1090
1-250-525-11
1-216-864-11
1-216-864-11
1-216-864-11
1-218-990-81
METAL CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
18K
0
0
0
0
R1117
R1145
R1173
R1300
R1301
1-218-990-81
1-216-296-11
1-216-296-11
1-218-953-11
1-250-640-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
0
0
0
1K
10K
5%
1%
1/16W
1/10W
R1302
R1303
R1304
R1306
R1307
1-250-668-11
1-216-809-11
1-250-654-11
1-216-821-11
1-250-519-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
150K
100
39K
1K
10K
1%
5%
1%
5%
1%
1/10W
1/10W
1/10W
1/10W
1/16W
R1309
R1310
R1311
R1312
R1313
1-250-541-11
1-250-541-11
1-250-664-11
1-216-821-11
1-216-864-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
82K
82K
100K
1K
0
1%
1%
1%
5%
1/16W
1/16W
1/10W
1/10W
R1314
R1316
R1317
R1318
R1320
1-218-977-11
1-216-833-11
1-216-864-11
1-246-184-81
1-216-821-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
100K
10K
0
2.43K
1K
5%
5%
1/16W
1/10W
0.5%
5%
1/16W
1/10W
R1333
R1334
R1350
R1353
1-218-977-11
1-218-953-11
1-216-864-11
1-218-989-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
100K
1K
0
1M
5%
5%
1/16W
1/16W
5%
1/16W
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
Ref. No.
Part No.
Description
R1354
1-216-296-11
SHORT CHIP
0
Remark
R1355
R1358
R1359
* R1361
1-216-864-11
1-216-864-11
1-216-864-11
1-250-513-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
0
0
0
5.6K
1%
1/16W
< TUNER UNIT >
TU01
A-1946-531-A
TUX-DSP03 (TUNER UNIT)
< VIBRATOR >
X501
1-814-485-11 QUARTZ CRYSTAL UNIT (48 MHz)
X502
1-814-767-11 QUARTZ CRYSTAL UNITS (13.333 MHz)
X503
1-814-777-11 QUARTZ CRYSTAL UNITS (32.768 kHz)
X701
1-814-778-11 QUARTZ CRYSTAL UNITS (16.9344 MHz)
X1300
1-814-367-11 QUARTZ CRYSTAL UNITS (30 MHz)
*************************************************************
REGULATOR BOARD
****************
< CAPACITOR >
C002
C003
CERAMIC CHIP 4.7uF
CERAMIC CHIP 4.7uF
10%
10%
6.3V
6.3V
5%
5%
1/16W
1/16W
5%
5%
1/16W
1/16W
IC001
6-719-012-01 IC S-13A1A12-E6T1U3
*************************************************************
5%
5%
1/16W
1/16W
MISCELLANEOUS
**************
1%
1/16W
Note 1: When the front panel (SV) (assy) (Ref. No. FP1) is replaced, the Bluetooth information writing and affixing of label (serial number) is necessary. Refer to “AFFIXING OF LABEL (SERIAL NUMBER)” and
“BLUETOOTH INFORMATION WRITING METHOD” on page 8.
50
1-112-746-11
1-112-746-11
< IC >
BT1
CNC1
FFC1
1-754-894-21
1-846-892-21
1-846-819-31
FFC1
1-846-819-41
FP1
A-2037-605-A
BT, ANTENNA
CONNECTION CABLE (AUTOMOBILE) ( )
CABLE FLEXIBLE FLAT (27 CORE)
(Length: 150 mm) (See Note 3)
CABLE FLEXIBLE FLAT (27 CORE)
(Length: 80 mm) (See Note 3)
PANEL (SV) (ASSY) FRONT (See Note 1)
FU1
1-523-227-11 MINI FUSE (BLADE TYPE) (10 A/32 V)
MIC1001 1-542-919-11 MICROPHONE
NFC1
X-2588-698-1 KNOB (VOL) (SV) ASSY (See Note 2)
PW1
1-846-979-11 CONNECTION CABLE, AUTOMOBILE (POWER)
*************************************************************
ACCESSORIES
************
1-489-810-42
4-489-404-14
REMOTE COMMANDER (RM-X231)
MANUAL, INSTRUCTION
(ENGLISH, FRENCH, SPANISH)
4-489-405-12 MANUAL, INSTRUCTION, INSTALL
(ENGLISH, FRENCH, SPANISH)
*************************************************************
Note 2: When the knob (VOL) (SV) assy (Ref. No. NPC1) is replaced,
Bluetooth information writing is necessary. Refer to “BLUETOOTH INFORMATION WRITING METHOD” on page 8.
Note 3: The length of cable flexible flat (27 core) has been changed
from 150 mm to 80 mm in the midway of production.
When replacing the part of Ref. No. FFC1, use the part of the
same length as before replacing.
MEX-M70BT
Ver. 1.3
Ref. No.
Part No.
Description
Remark
PARTS FOR INSTALLATION AND CONNECTIONS
**************************************
501
502
503
504
505
X-2583-962-1
4-276-003-02
4-461-753-01
1-846-979-11
2-889-508-01
FRAME ASSY, FITTING
KEY (FRAME) (1 piece)
COLLAR
CONNECTION CABLE, AUTOMOBILE (POWER)
PLATE (FITTING)
506
507
508
7-682-160-01
3-915-917-01
1-542-986-11
509
510
3-934-325-21
2-683-516-01
SCREW +P 4X6
SCREW, +T 4X12
MICROPHONE UNIT
(Including DOUBLE-SIDED TAPE)
SCREW, +K (5X8) TAPPING (1 piece)
CAP (AUX)
501
502
KEY (FRAME)
u2
FITTING FRAME ASSY
u1
503
504
POWER CORD
u1
COLLAR
u1
505
506
PLATE (FITTING)
u1
507
+P4 u6
u1
508
+T4 u12
u1
509
MICROPHONE
u1
DOUBLE-SIDED TAPE
u1
+K5 u8
u4
MICROPHONE UNIT
u1
510
CAP (AUX)
u1
51
MEX-M70BT
MEMO
52
MEX-M70BT
US Model
Canadian Model
SERVICE MANUAL
Ver. 1.1 2014.04
SUPPLEMENT-1
File this supplement with the service manual.
Subject: Change of MAIN board (Suffix-41)
Deletion of REGULATOR board
The MAIN board has been changed in the midway of production.
Moreover, REGULATOR board has been deleted with change of MAIN
board.
Discrimination, printed wiring board, schematic diagram and electrical
parts list of the MAIN board of New type are described in this service
manual SUPPLEMENT-1.
Refer to original service manual for information of Former type.
1. NEW/FORMER DISCRIMINATION
•
Distinguish by the part number of the silk print.
– MAIN Board (Component Side) –
•
Distinguish by the availability of the REGULATOR board.
– Top view –
Former : 1-889-479-22
New
: 1-889-479-41
REGULATOR board
Available
: Former type
Not available : New type
9-893-929-81
MEX-M70BT
2. DIAGRAMS
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
For Printed Wiring Boards.
For Schematic Diagrams.
Note:
• X : Parts extracted from the component side.
• Y : Parts extracted from the conductor side.
•
f : Internal component.
•
: Pattern from the side which enables seeing.
(The other layers’ patterns are not indicated.)
Note:
• All capacitors are in μF unless otherwise noted. (p: pF) 50
WV or less are not indicated except for electrolytics and
tantalums.
• All resistors are in Ω and 1/4 W or less unless otherwise
specified.
•
f : Internal component.
• C : Panel designation.
Caution:
Pattern face side:
(Conductor Side)
Parts face side:
(Component Side)
Parts on the pattern face side seen
from the pattern face are indicated.
Parts on the parts face side seen from
the parts face are indicated.
• Indication of transistor.
C
Q
These are omitted.
B E
Note: When the complete MAIN board is replaced, it is necessary to replace knob (VOL) (SV) assy simultaneously. Also, the destination setting, Bluetooth operation
check and Bluetooth information writing is necessary.
Refer to “DESTINATION SETTING METHOD” on
page 4, “BLUETOOTH FUNCTION CHECKING
METHOD USING A CELLULAR PHONE” on page
7 and “BLUETOOTH INFORMATION WRITING
METHOD” on page 8 on original service manual.
Note:
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part
number specified.
Note:
Les composants identifiés
par une marque 0 sont
critiques pour la sécurité.
Ne les remplacer que par
une pièce portant le numéro spécifié.
• A : B+ Line.
• Power voltages is dc 14.4V and fed with regulated dc
power supply from ACC and BATT cords.
• Voltages are dc with respect to ground under no-signal
(detuned) conditions.
no mark : TUNER (FM)
(
): CD PLAY
• Voltages are taken with VOM (Input impedance 10 M).
Voltage variations may be noted due to normal production
tolerances.
• Signal path.
F
: AUDIO
f
: TUNER
h : SIRIUS/XM
J
: CD PLAY
d
: USB
E
: AUX
a : Bluetooth
N
: MIC
Note: When the complete MAIN board is replaced, it is necessary to replace knob (VOL) (SV) assy simultaneously. Also, the destination setting, Bluetooth operation
check and Bluetooth information writing is necessary.
Refer to “DESTINATION SETTING METHOD” on
page 4, “BLUETOOTH FUNCTION CHECKING
METHOD USING A CELLULAR PHONE” on page
7 and “BLUETOOTH INFORMATION WRITING
METHOD” on page 8 on original service manual.
2
MEX-M70BT
Ver. 1.3
2-1.
PRINTED WIRING BOARD - MAIN Board (Component Side) 1
2
3
•
4
: Uses unleaded solder.
5
6
7
8
9
10
11
A
MAIN BOARD (COMPONENT SIDE)
C310
D805
A
K
C811
R834
C816
5 R831 8 C825
R821
A
K
D809
C832
R836
1
5
R817
R841
3
4
R850
R814 R818
R849
JL308
1
R593
R594
R630
R528
C402
R1033
R1031
IC1003
R638
R639
R683
R613
MIC1001
C567
R602
R601
R604
R603
CL525 R665 R656
CL524
IC503
C530
C537
C533
C531
C535
L502
C014
L505
C536
R583
C570
C568
3 R571
R551
R731
R1032
C443
R420
R404
R411
R631
R624
C010
176 CL528
C521
C524
C523
4
R572
88
R567
1
2 C519
CL521 CL522
89
C517
CL509
C516
R681
R542
R541
CL510
CL508
R548
C508
R545
C09
C559
OPTICAL
PICK-UP
BLOCK
(DAX-25A)
R641
1
X503
R680
CD MECHANISM
DECK BLOCK
(MG-101CF-188)
C549
45
R579
IC501
CN701
FFC1
G
R646
R625
R633
C547
R658
X502
SERVO
BOARD
R616
R651
R592 R640
CL513
R666
SENSOR
BOARD
R632
R627 R635
L501
R706
F
R619
R650
FB505
C564
R703 E
C705
C1313
44
R637
Q701
C719
R712
2
R566 CL511
R556
R519
132
R509
C511
C507
R534
R660
R535
R560
R1117
A
K
C015
R576
R540
R544
R525
27
133
CL530 R558
C503
R552
R714
IC401
C504
D502
C502
C1312
R21
1
C404
R538
R539
R1309
R1310
R742
R743
C720
D1003
CN1004
1
R634
R653
R622
R629
R643
FB501
C1310
IC1051
R1052
C400
R510
R511
R553
9
IC1300
C747
R407
R1312
R1306
8
R557
JL709
R516
R517
C1317
K
FB02
R655
R718 R721
C722 C749
C501
R408
4
R416
R502
R501
R1333
C723
C729
C846
R1307
C1304
FB404
4
5
C407
8
JL721
C786
R720
C553
IC804
1
FB703
R719
CL702
R662
C1316
R722
5
3
1
A
R415
C755
R760
R756
C787
CL529
L1301
C759
4
6
R1090
C1050
K
R1030
4
C1011
C1010
1
C1012
C1013
8
C1019 C1014
C1052
R1056
(CHASSIS)
A D1306
5
C746
C446
R412
R512
GS S S 8
C814
C1318
R1311
16
C772
R513
E Q802
C874
1
R723
C845
R1036
C1017
R1037
C748
R741
C781
R745
C878
C441
C442
C744
R410
C765
C861
Q803
CAM01
C425
C528
A
R808
R809
C1309
C1306
CL703
R684
CL507
D802
R1355
E
R307
R318
C318
R319
R715
3 R701
C702 R702
C560
C866
L801
R1358
1
C750
R526
C865
DD D D
E
C417
C416
C444
R409
R711
R574
C801
R1354
C711
C541
E
C867
R708
IC702
5
4
C782
R806
Q801
C410
C409
E R434 R438
R433
C401
C780
5
C716
C731
R744
4
R727
R890
E
C335
C743
R812
R846
E R422
C406
D401
C707
R707
C704
1
JL820
R840
JL310
K
Q405
E R421
C1018
3
R892
R835
R838
C830
R401
A
Q403
Q404
E
R435
C414 R440
C418
C419
R436
R432
Q408
Q407
Q406
C013
IC704
C831
JL823
R413
C336
C411
R417
C334
C712
E
R317
C408
R414
R323
C337
Q806
R858
C341
C319
R320
C321
C320
C323
JL307
R860
R306
R321
C325
C326
R322
R309
C324
R305
C316
Q807
C317
C322
K
R312
R597
R659
D
C848
A
R861
E
C837
C835
L802
A
C840
R878
C843
C833
C844
K D813
D811
R888
D814 K
R857
C841
C
A
K
R862
R308
R406
R705
FB804
C314
R304
C343
C342 FB302
C340
C339
R315 R316
C308
C305
C309
C333
C331
C311
C330
C313
C338
JL306
R439
C405
D304
C328
R423
A
C312
IC802
R848
FB803
C803
C804
FB801
FB802
C332
C307 R303
R813
5
F801
C329
C315
C807
C571
1
IC801
4
D808 K
8
A
R829
B
C1016
R1019
R1001
R1023 R1025
20
11
21
10
C1332
R1004
R1005
C1329
C1322
IC1002
BT MODULE
(WB113C)
R1035
R1006
R1010
R1012
CN1002
L1303
C1353
L1307
CNC1
5
CL1331
R108
CAM101
C106
K
R012
CL1332
CL112
C104
C109
R1040
C1341
1
CN1300
40
BT1
BT ANTENNA
PATTERN
ANTENNA
L1302
1
31
C1342
C1336
C1333
30
I
C1334
C1321
1
R1011
R1013
R104
FB101
H
A
(CHASSIS)
D114
C1337
C1339
41
C1338
J
Note 1: IC804 and IC1002 on the MAIN board cannot replace
with single. When these parts are damaged, replace
the complete mounted board.
MEX-M70BT
1-889-479-
(41)
CL110
3
Note 2: The service manual of the mechanism deck, used in this model,
has been issued in a separate volume. Please refer to the service
manual of the MG-101 series for the mechanism deck information.
3
MEX-M70BT
Ver. 1.3
2-2.
PRINTED WIRING BOARD - MAIN Board (Conductor Side) - •
1
2
3
4
: Uses unleaded solder.
5
6
7
8
9
10
11
12
MAIN BOARD (CONDUCTOR SIDE)
J401
J1001
REAR
A
SUB
FRONT
L
(FRONT VIEW)
CN301
AUDIO OUT
R
L
1
MIC
FU1
4
R
2
J801
(REMOTE IN)
3
5
8
6
9
7
10
R302
J001
(ANTENNA IN)
PW1
CL301
CL302
CN801
(SIRIUSXM IN)
IC301
B
24
2
25
2
14
1
13
4
8
9
10
7
1
5
2
6
3
TO
CN301
JL801
1
JL302
JL301
C302
E
C525
CL523
C526
R515
R514
C1094
24
C1326
R1318
IC1301 37
X1300
1
C1320
JL1300
C1323
C1324
FB1300
4
BLK
YEL
REM OUT MAX 0.4A
ILL
ACC
GND
BATT
C852
JL802
JL723
JL724
C717
C847
C834
23
R803
C805
R870
A
R805
C828
R863
C838
C850
C809
22
C818
C821
C839
C819
GS S
Q805
DDD D
R853
K
C876
C306
R851
R852 R854
C817
G
S
S
S
G
R811
D801
D1300
R618
R617
R832
R827
C738
R830
C812
R847
R810
A
R894
R839
C829
R816
3
C813
R825
R815
6
R823
R826
C827
JL804
D303
K
R865 C823
C815
1
IC803
C822
FB805
A C806
D806
A
C872
R833
C810
JL806
A
Q810
Q811
D
D
K
C1303
C1301
C1307
K
R1303
JL719
R726
16
FRONT RCH (–)
R1300
R1334
JL715
C714
JL716
JL1030
JL805
JL727
1-889-479-
(41)
JL732
JL731
JL1012
3
JL1001
4
R1002
1
5
JL1007
R1015
R1055
R871
R1007 JL1002
C1005
R872
JL1011
CL1001
JL1003
IC1302
5
C1330 C1325
K
C761
C760
C758
C768 R740
C764
R606
IC10013
JL1008
R1029
C1314
R1350
C1009
R1028
48
R1316
I
R1320
R1317
C1331
R547
R546
C1344
12
L1304
36
C1006
C1008
C1315
R1353
25
A
JL1020
C1328
13
L1305
15
RED
FRONT LCH (–)
JL702
K
D501
JL1019
FB1301
R1313
C1327
H
14
ORG/WHT
FRONT RCH (+)
JL701
IC1009
R1361
13
BLU/WHT
FRONT LCH (+)
JL729
C1004
5
12
GRY/BLK
JL733
CL1000
8
R591
C512
R1017
1
4
JL538 JL730
JL710
R520
R522
R521
R1014
R561
11
WHT/BLK
REAR RCH (–)
41
JL708
R1003
R505
R503
R504
R559
10
GRY
REAR LCH (–)
JL711
JL707 JL706
R554
R563
C505
R527
9
WHT
REAR RCH (+)
C509
R524
R506
R578
R549
CL504
CL501
CL502
R529
G
JL705
JL539
CL519
JL714
JL704
R585
JL717
C510
C506
CL503
R728
JL703
C529
R573
CL518
CL517
R608
C515
C518
R657 R609
C543
R599
JL540
R582
5
R555
R507
JL1018
C522 C527
C520
R565
R586
R562
4
C569
X501
R598
R605
1
CL520
IC504 3
C532
C539
R600
C538
C566
L504
C534
CL535
R568
R623
CL537
26
JL722
R750
JL718
1
25
R748
JL726
R709
C734
C783
C745
C718
C793
C721
C766
C770
C762
JL712
C771
R590
JL720
JL713
C736
JL725
C767 FB702
R607
JL1010
IC502
R621
CL536
R626
R642
R649
5
R652
JL1016
8
R628
R523
JL526
JL528
CL505
C548
C544
C735
R751 100
C546
C540
JL530
1
4
C550
8
VIO/BLK
REAR LCH (+)
K
R837
R1359
R717
R550
R682
R615
C851
5 JL808
C715
C728
CL701
C732
C727
IC705
4
JL807
D816
IC805
IC703
R301
R869
R842
R845
1
4
C730
R734
C725
R654
R587 R644
R1024
R611
C551
JL529
R612
R533
CL512
CL539
R610
3
R753
R752
JL1014
JL527
50
C790
C788
R733
R648
JL524
FB504
JL525
R614
JL1102
CL02
R704
51
R757
R749
JL534
JL522
JL523
8
C545
CL01
C754
75
JL803
C742
R758 76
D818
R819
JL533
R647
L01
C756
E
K
R1304
C1308
R1301
JL402
JL532
JL531
R10
R11 R02
R725
R737
E
C737
R724
R762 R754
L401
C05
C763
R738
R739
C775
C773
R747
R763
JL01
R09
C777
A
R868
R822
JL403
C779
7
GRN/BLK
L301
44
R856
R807
C769
R105
C03
E
R735
C751
Q814
C706
C107
C105
C103
R103
TU01
TUX-DSP03
(TUNER UNIT)
R732
X701
C420
C421
C422
R107
C1358
D817
K
E Q812 Q813 A
C741 C740
C739
20
R437
1
R859
1
R431
R424
1
R310
C415
R761 R755
C423
C424
D1002
C1054
21
IC402
D
A
C412 C413
C445
40
6
VIO
D301
R311
R729
R430
R425
R426
R427
R428
R429
JL1021
K
5
GRN
JL305 JL304
A
JL309
D1001
A
K
4
C303
D812
C820
E
A
FB1005
R828
FB1004
Q402
FB1003
K
C
F
JL311 JL303
C304
C301
R1302
Q401
E
2
3
15
16
JL401
Q808
1
JL1017
JL1004
JL1005
R1314
1
JL1006
R1021
JL1015
JL1013
R1016
R1020
R1018
JL1009
R1145
JL108
JL105
JL107
JL106
JL104
JL111
JL109
JL110
JL113
JL114
JL101
2
JL112
JL118
JL115
JL102
R1173
JL119
R102
JL103
JL116
C102
20
JL117
1
J
19
CN101
KEY
BOARD
MEX-M70BT
Note: When IC502 on the MAIN board is replaced, the destination
setting is necessary. Refer to “DESTINATION SETTING
METHOD” on page 4 on original service manual.
Refer to page
27 on original
service manual
4
4
MEX-M70BT
SCHEMATIC DIAGRAM - MAIN Board (1/4) 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
MAIN BOARD (1/4)
A
17
C745
0.1
+3.3V REGULATOR
IC702
BU33TD3WG-TR
C771
0.1
C767
0.1
C749
1
C764
0.01
JL724
C770
0.01
C766
0.0022
C793
47p
FB702
R751
47k
CL702
IC704
G
SELF
16
IN_SW
17
LOAD
18
SL
19
SP
20
BU_GND
21
D_SW
22
L_SW
23
DRV_GND
24
DRV_GND
25
DRV_6V
26
DRV_6V
27
JL730
MEC_INSW
JL731
MEC_LOAD
JL732
MEC_DSW
JL733
MEC_LIMIT
JL701
R740 100
C761 0.1
(1.5)
LPFO
(1.7)
VCOF
PVREF
RVSS3
(1)
(1.7)
VCOI
(3.3)
RVDD3
PIO17
CD_XCCE 82
45
SDOUT_CH0
LRCK_OUT
CD_BUCK 81
46
PIO16
BCK_OUT
CD_BUS3 80
PIO20
CD_BUS2 79
VDD3-2 83
47
CD_BUS1 78
48
49
CD_BUS0 77
MS 76
R706
0
C728
0.1
C747
0.1
C731
1
C754
0.1
R724
330
R727
0
R725
330
R729
330
R732
330
R735
330
CD_ZDET
(3.4)
DEC_XMUTE
(0.4)
R733 0
LRCK_IN
(0)
R734 0
BSIF_BCK
(0)
BSIF_DO
(0)
BSIF_GATE
(0)
BSIF_ST_REQ
(0)
DEC_INT
(1.5)
R749
100k
(3.3)
(3.3)
C790
0.1
DSP_RST
(3.1)
R756 100
(3.3)
R757 100
(0.1)
R754 100
CD_SDI
(0.3)
R755 100
CD_SDO
CD_XCCE
CD_BUSCLK
(3.3)
R758
100k
(0)
R760
100k
R747
100k
R761
100k
R763
100k
C772
2.2
C780
0.0022
R744
10k
C763
12p
C781
0.0022
FB703
C750
4.7
50V
C712
0.1
R743
10k
X701
16.9344MHz
SERVO_ON
C756
12p
C748
4.7
50V
C730
0.1
C779
2.2
C765
2.2
C759
0.1
C746
4.7
50V
C787
0.1
C777
2.2
R738
2.2k
C744
4.7
50V
C786
1
C775
2.2
R739
1M
C741
0.0033
(Page 8)
(0.1)
R762
100k
C782
0.1
R737
0
C740
0.0033
R702
0
SP_DATA
C788
0.1
C739
0.0033
AU_GND
SP_CLK
R753 100
C742
0.1
C743
22
6.3V
C725
0.001
R752 100
(2.9)
R745
0
C705
0.1
R701
0
(3.4)
CL703
C755
0.001
C723
0.01
JL702
(Page 6)
BUS1
(1.7)
LRCK_IN_R
R707
0
(1.7)
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
C716
2.2
R731
0
A_GND
BUS2
(1.7)
BCK_IN_R
44
D_GND
3
RFI
43
VSS-3 84
50
R715
0
DR_GND
MAIN
BOARD
(4/4)
SLCO
SDIN_R
C738
0.0033
J
RFRPI
PIO11
JL716
I
2
RFEQO
DCOFC
RFO
AGCI
RVSS3
FNI2
FNI1
FPI2
FPI1
VDD1-1
/RST 85
41
42
C737
0.0033
MAIN
BOARD
(2/4)
(1.7)
(1.7)
(1.7)
(1.7)
(1.5)
(1.9)
(1.9)
(1.9)
(1.9)
(1.5)
(1.9)
(1.9)
VDD1-4 86
C729
1
JL715
TPI
PIO10
(1.6)
ADVSS3
DRV_ON
MEC_SELFSW
(1.7)
DEC_INT 87
40
JL713
JL729
(0.2)
BSIF_INT 88
IC705
TC94A99FG-003 (SYCH
ADIN2 (IN_R-CH)
C727
0.1
JL712
RF AMP, DIGITAL SERVO PROCESSOR, AUDIO DSP
VDD3-1
ADVREFH
(1.7)
R723
100
VDD1-2
39
BSIF_GATE 89
ADVCM
14
15
OPTICAL
PICK-UP
BLOCK
(DAX-25A)
H
13
TRACK
(1.7)
DEC_BCK_IN
MEC_EJECT
38
BSIF_DATA 90
IC705
(1.7)
(1.6)
FOCUS
DRV_ON
JL727
/SRAMSTB
(2.7)
12
DEC_LRCK_IN
JL711
VDDM1
37
ADVREFL
EJECT
JL710
R722
100
36
ADIN1 (IN_L-CH)
11
R703
0
BCK_IN_F 91
(1.7)
10
JL714
LRCK_IN_F 92
DMO
(0.7)
LD
DRV_VREF
JL709
FMO
(1.6)
FFC1
SERVO
BOARD
(0.9)
34
35
ADVDD3
9
(1.7)
R721 100
R748
330k
ZDET 94
XVDD3
8
PD
R720 0
1
DEC_XMUTE 93
XO
OP_GND
DEC_SDIN_CH0
(1.7)
VSS-1
(3.3)
7
JL708
(0.9)
R719 100
TRO
33
(3.3)
1/2VCC
R718
100
DEC_SDOUT_F
JL707
32
XI
6
JL706
2
SP_CLK 96
(1.5)
5
DSP_SSTBY
3
SP_DATA 95
(1.5)
F
OP_VCC
C722
0.1
JL705
FOO
(1.5)
4
(3.3)
AVDD3
XVSS3
C732
0.1
JL704
30
31
(1.7)
3
E
(1.5)
4
TEST 97
VSS-2
(3.4)
TEI
VDD1-3
(1.5)
29
DVDD12
SENSOR
BOARD
C
(1.7)
(US, CND)
5
PDO 98
DVSS5
4
RFRP
DAO5 (SUB-CH)
(1.7)
RFZI
(3.3)
CD MECHANISM
DECK BLOCK
(MG-101CF-188)
2
(1.6)
6
TMAX 99
27
28
DVDD5
CL701
7
LPFN 100
(3.3)
(1.5)
(1.7)
8
FSMONIT
DAO4 (R_L-CH)
NC
5
JL721
F
A
(3.3)
9
26
DVSS34
VOUT
JL703
1
(1.7)
R717 0
CN701
27P
B
JL723
JL718
GND
STBY
C720
47
C715
2.2
C706
1
E
3
(1.7)
(2.2)
C719
0.1
R711
0
JL722
(1.7)
(3.3)
VIN
C735
0.033
DAO3 (F_L-CH)
(1.8)
(1.7)
(Page 7)
1
2
R704
0
Q701
2SA2119K
AUTOMATIC
POWER
CONTROL
DVDD34
C704
1
(3.3)
BU_3.3V
25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
(2.1)
+1.5V REGULATOR
IC703
BU15TD3WG-TR
DR_6V
MAIN
BOARD
(3/4)
(2.1)
(2.8)
4
C711
0.1
C702
0.1
1
C734
0.0056
JL719
IC703
D
R712
1
C714
0.047
(3.3)
NC
C717
0.047
TNI
STBY
C721
470p
(1.5)
VRO
GND
5
DVREF
3
C718
470p
VOUT
DAO2 (F_R-CH)
2
(3.3)
R705
0
VIN
LDO
1
R750
15k
R709
1k
IC704
BU15TD3WG-TR
(3.3)
C783
0.015
JL720
+1.5V REGULATOR
C
C762 0.0056
22k
JL726
R726
R708
0
C736
0.001
R728
22k
C758 0.1
R714
12
4
C760 0.015
NC
AVSS3
STBY
(3.3)
DVSS12
B
GND
5
(1.7)
3
VOUT
MDI
2
(3.3)
VIN
DAO1 (R_R-CH)
1
(1.7)
(6)
C707
1
18
JL725
IC702
C768
0.01
2-3.
C751
2.2
AU_RR_CH
K
4
MAIN
BOARD
(2/4)
(Page 6)
R741
2.7k
AU_FR_CH
R742
2.7k
AU_FL_CH
AU_RL_CH
C769
2.2
AU_SUB_CH
C773
2.2
AU_IN_LCH
AU_IN_RCH
Note: The service manual of the mechanism deck, used in this model, has been issued in a separate volume.
Please refer to the service manual of the MG-101 series for the mechanism deck information.
MEX-M70BT
5
5
MEX-M70BT
Ver. 1.3
2-4.
SCHEMATIC DIAGRAM - MAIN Board (2/4) 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
MAIN BOARD (2/4)
A
23
J401
6P
R
FRONT
JL401
L
JL402
R416
0
R420
10k
0.7
Q401
LTC014EUBFS8TL
45
ON/OFF
7
3 V+
CLK
6
4
GND
5
C+
C–
IN_FL
C409 10 16V
R421 220
IN_FR
C406 10 16V
R413 220
C443
47p
R411
10k
R425
0
C425
2.2
R438
220
J001
0
0
8.4
8.4
8.4
8.4
8.4
8.4
4.2
4.2
4.2
4.2
4.2
4.2
4.2
8.8
4.2
31
32
33
34
35
36
37
38
39
40
XM_LCH
AU_IN_SUB
AUX_RCH
AU_IN_RL
AUX_GND
AU_IN_RR
AUX_LCH
AU_IN_FL
TU_RCH
AU_IN_FR
TU_GND
AU_OUT_FR
TU_LCH
AU_OUT_FL
NCO
AU_OUT_RR
NCO
AU_OUT_RL
BUS_RCH
AU_OUT_SR
BUS_LCH
AU_OUT_SL
14
13
11
10
0
0
R302
0
C013
0.1
0
0
C421
1
R437
1k
JL1016
R1145
0
JL1018
JL1001
17
R409
0
(ANTENNA IN)
R21
0
R1003
100k
A_GND
3
STBY
NC
3.3
R1013
0
2
0
Q408
LTC914TUBFS8TL
MUTING
MUTING
C405
47p
1
C408
47p
C411
47p
C414
47p
C418
47p
FB02
TU01
TUX-DSP03
(TUNER UNIT)
C419
47p
4.2
3
4.2
4.1
4.1
4.1
4
C03
1
C424
0.022
1
4.1
3
4.1
4
R09 1k
2.4
5
I2C1_SCL
R10 0
2.8
6
I2C1_SDA
R11
2.8
7
4.9
8
100
C423
0.022
JL1012
JL1010
JL1014
R1023 100
5
5
0
Q407
LTC914TUBFS8TL
MUTING
C09
47
C05
0.1
R1019 100
VOUT
GND
R1011 0
VIN
R1014 100
1
2
3.4
R1015 22
5
D_GND
FB404
JL1008
IC1001
+3.3V REGULATOR
IC1001
BU33TD3WG-TR
C1004
1
6
0
Q406
LTC914TUBFS8TL
MUTING
C010
1
JL1102
RF_ANT_IN
RF_GND_B
AUDIO_OUT_L
AUDIO_OUT_R
RSTN
SCL
SDA
+5V
CL01
R1055
0
R1017 22
JL1007
XM_LCH
18
XM_RCH
JL1019
7
0
Q405
LTC914TUBFS8TL
MUTING
C422
1
R1361
5.6k
19
8
0
Q404
LTC914TUBFS8TL
MUTING
2
22
20
9
0
Q403
LTC914TUBFS8TL
0
INPUT SELECTOR,
ELECTRICAL VOLUME
IC402
BD3468FV
23
12
4.1
15
4.1
16
IC402
4.1
30
NCO
FN2
FP2
17
29
4.1
18
28
XM_GND
GND
0.1
19
27
XM_RCH
AU_OUT_LCH
I2C_SDA
20
26
4.1
VCCH
HIVOLB
R1173
0
25
C420
1
24
FP1
AU_OUT_RCH
23
FIL
FN1
VCCL(8.5V)
22
NCO
21
I2C_SCL
37
R406
0
R1025
100
R1024
100k
JL01
C1006
0.1
4
11
C1353
0.1
C1323
4.7
R1320
1k
C1331
1
5
2
CN1004
2P
MIC1001
MIC_SIGNAL
1
MIC_GND
2
C1050
0.001
1.5
0
C1054
0.001
USB_SHIELD
1
USB_GND
2
O
D–
3
D+
4
V_BUS
5
AMBER
VDD33
4
1
6
3.3
2
5
3.3
4
1.5
3
VCC
GND
R1090
0
D1002
DZ2J06800L
C1010
1
STBY
IN+
3.3
3.3
3.3
27
26
PPB4
CSB4
VSS
PPB3
CSB3
PPB2
CSB2
PPB1
CSB1
VSS 27
DM1 25
0
IN–
3.3
6
1.3
5
1.3
R1033
15k
R1030
100
JL119
L1305
15nH
C1332
0.1
JL102
JL101
L1304
15nH
JL115
C1333
0.1
JL114
JL113
C1017
0.001
C1334
0.1
R1036
680
RE_IN0
JL112
RE_IN1
JL111
KEY_IN1
JL110
JL109
KEY_IN0
R1031
2.2k
D1306
RB751V40,115
C1013
0.047
C1012
1
C1011
1
C1018
4.7
C1019
0.47
R1313
0
R1353
1M
X1300
30MHz
D1001
DZ2J06800L
C1315
10p
(Page 8)
JL118
0
VDD25
DP1 26
VDD25
VSS
X2
BUS_B
V+
OUT
7
MAIN
BOARD
(4/4)
CN101
20P
2.6
1.3
REG
GND
30
DP2 29
0
3
VDD33 30
7
31
L1303
15nH
28
X1
0
2.7
32
2.6
29
12
R1037
47
8
33
0
DM3 31
11
3.3
IC1051
NLASB3157DFT2G
NOISE
C106
0.001
DP3 32
10
2.6
2
C104
0.001
DM2 28
2.6
2.4
USB CONTROLLER
IC1301
PPD720114GA-YEU-AT-SAK
3.3
MIC INPUT SELECTOR
C109
0.1
L1302
15nH
0
13 14 15 16 17 18 19 20 21 22 23 24
C1314
10p
MIC
CN1300
5P
GREEN
9
IC1003
NJM2781RB1
C1052
0.1
FB1003
J1001
IC1003
7
8
MIC AMP
FB1004
N
2.6
LED1
DPU
1.2
C1014
1
6
IC1301
R1318 2.43k
D1003
DZ2J06800L
M
1.2
JL1021
LED2
DMU
R1056
0
5
VDD25 33
VDD33
0
LED3
DP4 35
DM4 34
AVDD
3.3
4
VSS 36
VDD25OUT
VSSREG
AVSS
0
R1021 100
LED4
AVDD
R1016 100
JL1017
3
AVSS(R)
R1012
0
R1020 100
JL1011
1
R108
470
D114
DZ2J06800L
SYSRSTB
1
VBUSM
VDD33REG
2.6
JL1015
0.5
R103
2.2k
R107
12k
48 47 46 45 44 43 42 41 40 39 38 37
R1018 100
IC1051
3.3
C1321
0.1
1
R1001
0
R1052
0
C107
1
R105
12k
R104
470
C1320
22
R1032
10k
C105
2.2
FB101
RREF
L
C103
1
3
JL1009
JL1013
C1342
0.001
4
2
R1010
0
C1341
0.001
R1317 0
6
CN1002
K
R1040
18k
R1316 10k
7
C1324
1
3.3
GND_40
RF
GND_1
R1029 0
TEST
IC1002
BT MODULE (WB113C)
32
WP
GPIO[3]
R1028 0
8
3.3
GND_2
9
3.3
GND_3
GPIO[1]
C1008 2.2
1.3
RESET
VREG_IN_USB
12
13
UART_TX
15
14
UART_RX
UART_RTS
16
USB_DP
17
18
PCM_CLK
GPIO[2]
31
PATTERN
ANTENNA
NC
10
40
30
GND_5
GND_38
29
JL1006
BT1
BT ANTENNA
GND_6
GPIO[5]
GPIO[4]
39
28
JL1005
VREG_EN
SPI_PCM_SEL
PCM2_OUT
38
27
JL1004
PCM2_IN
SPI_CS
26
SPI_CLK
25
J
USB_DN
USB/UART
24
JL1003
37
R1006 100
VREG_IN_HV
PCM2_SYNC
36
CL1001
R1350
0
C1009 2.2
VREG_OUT_HV
SPI_MOSI
BT_DIN
23
SPI_MISO
R1035 0
VREG_OUT_USB
22
35
BT_DOUT
CL1000
JL1002
34
R1005 100
UART_CTS
20
R1004 100
BT_SYNC
GPIO[0]
BT_CLK
21
VDD_PADS
JL717
VDD_HOST
R1007
0
R412
0
33
R410
0
AU_GND
19
R407
0
DR_GND
(Page 5)
CNC1
(Page 5)
C400 10
39
C1016
10
I
3.4
3.4
16.4
40
38
C1005
47
2
R434
220
C404 0.1
G
MAIN
BOARD
(1/4)
C417
2.2
4
MAIN
BOARD
(1/4)
AU_FR_CH
C407
0.1
24
H
R436
47k
AU_IN_LCH
R102
0
(Page 8)
R435
47k
R432
47k
1.1
34
F
R423
47k
AU_RR_CH
33
MAIN
BOARD
(4/4)
R417
47k
AU_RL_CH
35
6
SUB
R414
47k
AU_FL_CH
36
E
L
AU_SUB_CH
3.5
41
(Page 7)
REAR
AU_IN_RCH
NCO
5
R
R415
6.8k
42
MAIN
BOARD
(3/4)
AUDIO OUT
0
0
R439
C441
47p
C442
47p
43
D
R440
16.4
C402
1
44
R422 220
R426
0
8.8
0
46
8
C410 10 16V
R427
0
13.7
47
2
VOUT
C444
47p
C445
47p
IN_RR
R428
0
9.4
FB
R431
0
C413
0.1
R433 220
R429
0
1
I2C0_SCL
C446
10
35V
C416 10 16V
R430
0
1.3
R424
0
IN_RL
JL403
0
0
I2C0_SDA
C412
10
ATT
0
13.9
C
REGULATOR
IC401
NJW4190R-A
Q808
LTA014EUBFS8TL
Q402
LTA014EUBFS8TL
R404
150k
IC401
Q401, 402, 808
MUTING CONTROL
L401
2.2uH
C415
10
B
L01
4.7uH
R02
0
C1326
0.1
C1329
0.1
FB1301
FB1300
C1327
4.7
C1322
0.1
C1328
4.7
LCD_DATA
JL107
LCD_CE
JL106
LCD_CLK
JL105
JL104
JL108
SIRCS
C1339
2.2
JL116
JL117
FB1005
JL103
NOSE_SW
C102
10
C1338
47p
1
USB_VBUS
2
USB_GND
3
D–
4
D+
5
GND
6
AUX_L
7
AUX_R
8
AUX_GND
9
RE_0
10
RE_1
11
KEY_1
12
KEY_0
13
LCD_DATA
14
LCD_CE
15
LCD_CLK
16
ILL(FP+B)
17
SIRC
18
KEY_GND
19
GND
20
PANEL_SW
KEY
BOARD
Refer to page
29 on original
service manual
C1337
0.1
L1307
C015
0.001
C1336
47p
C014
1
R012
0
CAM101
(CHASSIS)
CAM01
(CHASSIS)
MEX-M70BT
6
6
Note: IC1002 on the MAIN board cannot replace with single. When
this part is damaged, replace the complete mounted board.
MEX-M70BT
Ver. 1.3
2-5.
SCHEMATIC DIAGRAM - MAIN Board (3/4) 1
2
3
4
6
5
7
8
10
9
11
12
13
14
15
16
17
18
20
19
21
22
23
MAIN BOARD (3/4)
A
CN301
16P
11
12
C
ACC
BATT
13
15
NC
10
ILL
11
NC
12
ACC
13
TELL_ATT
14
VCC
15
GND
16
14
16
GND
C305
47p
C304
47p
C302
47p
R878
0
R301
4.7k
PW_GND4(FR)
OD
25
23
7.2
FR–
22
3.7
24
VCC1
21
7.2
FR+
MUTE
PW_GND3(RR)
20
14.1
RR+
RR–
19
7.2
AC_GND(BEEP)
17
7.2
18
16
3.7
IN_FR
IN_RR
15
3.7
IN_FL
PRE_GND
14
12
3.7
13
11
3.7
3.7
RIPPLE
10
3.7
FL_N
C301
47p
IN_RL
PW_GND1(RL)
RL+
RL–
8
FL+
STBY
VCC2
FR_N
FL_N
FL_P
JL311
IN_FL
ILL
9
IN_RL
10
8
IN_FR
9
7
FL–
IC301
POWER AMP
IC301
PURE5001H-4WX
IN_RR
REM OUT MAX0.4A
FR–
AMP_REM
FL_P
9
TO
CN301
FR_P
7.2
8
6
7
7
FRONT LCH (–)
5
FL+
7.2
FRONT LCH (+)
FRONT RCH (–)
FR+
6
6
14.1
B
5
FL–
FRONT RCH (+)
RL_P
RL_N
5
4
4
3
RL–
7.2
RR–
REAR LCH (–)
RR_P
RR_N
3.4
4
2
TAB
3
1
RL+
PW_GND2(FL)
REAR RCH (–)
RR+
3
2
2
1
REAR LCH (+)
7.2
REAR RCH (+)
1
PW1
RL_N
JL303
C337
4.7
50V
RL_P
C312
0.1
JL304
RR_N
JL305
C336
4.7
50V
C335
4.7
50V
C334
4.7
50V
RR_P
FR_N
FR_P
J801
(REMOTE IN)
FU1
10A
32V
CN801
(SIRIUSXM IN)
1
D
2
4
5
3
6
8
9
R305
1k
C316
1
C317
1
R306
1k
C318
1
C319
1
R307
1k
C320
1
C321
1
R308
1k
C322
1
C323
1
R322
10k
R320
10k
R317
10k
R315
10k
JL307
JL309
7
10
JL310
L301
C340
47p
D303
GN1G
F801
2A
36V
6
4
R836
100
4.9
1
0
3.3
5
GND
R312
47k
D304
DA2J10100L
C804
0.001
VCC
5
4
GND
R841
100k
C832
0.1
C326
1
C343
47p
4.9
2
3
C825
0.1
NC
R304
0
D401
DA2J10100L
0
R849
39k
R848
22
R309
150
C303
4700
16V
C310
0.1
C306
0.1
C329
0.1
C308
47p
C331
47p
R311
0
C324
47p
C315
47p
R401
22
R323
0
7
3
R869
1k
C328
47p
2
R868
1k
C314
10
4.8
4.9
C313
47p
FB804
C325
1
IC802
74LVC1G17GW-125
C311
47p
R818
12k
C803
0.001
FB302
BUFFER
R831
100k
C309
47p
3.3
C338
47p
IC802
4.9
8
VCC
D301
DB2441600L
1
D818
DZ2J18000L
4.9
D817
DZ2J07500L
R814
12k
F
R821
1k
R817
0
D809
DZ2J18000L
R813
1k
R859
10k
BUFFER
IC801
TC7WH126FK
FB803
FB802
R856
10k
D808
DZ2J18000L
FB801
IC801
R829
100
C816
100p
R834
100
C1358
2200p
C811
100p
C332
0.1
C307
1
D805
DZ2J18000L
JL308
C342
47p
C339
47p
C807
0.001
E
C341
47p
C330
47p
R321
6.8k
C401
47
25V
C333
47p
R319
6.8k
R318
6.8k
R316
6.8k
47
46
XM_LCH
XM_RCH
45
G
R850
68k
JL301
JL302
R310
47k
CL302
CL301
43
42
D811
DZ2J18000L
C840
0.47
D812
GN1G
R303
10k
D813
DZ2J18000L
XM_PWR
9
RC_IN0
8
JL806
15
ECO
EN_SYS
6.5
16
R860
47k
C843
0.001
BATTERY CHECK
3.3
R888
0
0
0
Q806
LSCR523UBFS8TL
ACCESSORY CHECK
40
BUFFER
IC1009
39
EEPROM
IC1009
MFI337S3959
37
1
1.7
VCC
36
35
3.3
5
3.4
2
3
R862
100k
NC
1.7
4
GND
1
GND
VCC
8
2
SDA
RST
7
3
NC
SCL
6
4
NC
NC
5
34
3.3
MAIN
BOARD
(2/4)
(Page 6)
3.4
C566
0.1
R1117
0
C1094
0.1
0
33
Q807
LSCR523UBFS8TL
DIMMER DETECT
R830
39k
3.3
5
38
IC504
74LVC1G17GW-125
C844
4.7
25V
R861
22k
0.6
0
Q812
LTC044EUBFS8TL
Q814
LSCR523UBFS8TL
R842
0
14
FB805
USB_ON
D816
RSX051VA-30
C841
0.47
41
IC504
D814
DA2J10100L
R858
4.7k
6.5
Q813
LTC014EUBFS8TL
R845
0
12
USB_OVR
SYNC_OUT
11
13
I
0
Q812, 814
BACK UP
VOLTAGE DETECT
10
R827
390k
(Page 8)
7
RC_IN1
8
MAIN
BOARD
(4/4)
BU_IN
6
STB
5
I2C0_SDA
I2C0_SCL
3
4
AMP_ATT
2
R857
47k
BEEP
1
H
44
R1002
0
JL802
C814
100
16V
C813
22
C827
1
C812
1
C820
0.47
C809
0.0068
R828
82k
C839
150p
C822
10
BU_3.3V
DR_6V
R837
33k
R808
10k
R823
4.7k
R809
10k
R822
270
R871
0.068
1/2W
R872
0.047
1/2W
C806
0.1
J
R854
100k
(Page 5)
IC1300
R853
2.7k
R1333
100k
DC/DC CONVERTER
K
C810
10p
R810
15k
REGULATOR
R1354
0
0.9
1
IC803
O
C805
680p
C819
10
R835
75k
R865
360k
C848
47
R838
120k
GATE5
VIN0
43
12.1
42
14.1
R892
0
C835
470
16V
C837
470
16V
C867
470
16V
C834
10
C876
10
C838
0.1
R852
10k
R894
100k
R819
100k
C1301
10
C831
470
16V
C821
10
R826
300k
C830
470p
R890
0
C1303
10
C1304
1
C861
10
R1355
0
R1358
0
6.4
R806
100k
D802
DZ2J09100L
JL803
R846
1k
14.1
3
3.3
4
5.2
5
1
6
5.2
7
1.1
8
VREF
BST
LX
RT
VIN
GNDA
EN_SYS
SS_SYS
USBOUT
EN_USB
FB_USB
VIC_USB
USBIN
ISET_USB
SYNC
FLT_USB
C1318
2.2
16
6
15
1.6
R1311 100k
13
6
C1316 0.01
12
3.3
11
0
R1307 10k
10
1
C1317 0.1
9
3.3
14
R1303
100
R1309
82k
R1310
82k
C878
2.2
C1306
47
R1300
1k
R1334
1k
C1307
22
Q801
LTC014EUBFS8TL
Q802
LTA014EUBFS8TL
Q801, 802
POWER CONTROL
R1301
10k
R1302
220k
C1310
100
16V
C845
1
C1325
1
C1312
0.01
C1313
22
R1306
1k
R1312
1k
0
6.4
6
S
6.4
Q803
NTTFS5116PLTWG
B+ SWITCH
0
8
7
6.4
6.4
6.4
R1359
0
C874
47p
C1330
47
JL807
IC804
IC1302
+6V REGULATOR
+3.3V REGULATOR
IC1302
BU33TD3WG-TR
IC804
BD60HC0WEFJ-E2
R812
100
6.4
R870
1k
2
JL1030
R863
0
JL823
R840
120k
1
5.2
R851
0
0
C829
470p
R1304
39k
10.5
44
BCAP
VINSW
41
40
14.1
14.1
14.1
NC
HSW2
39
HSW1
14.1
38
GND4
SW2
3.3
36
FB2
INV2
34
1.5
0.9
C872
470p
D806
RSX205L-30TE25
37
C828
1
R805
100k
R807
27k
C847
22
C850
10
R839
680k
C817
0.1
R833
1k
C818
10
R825
33k
L801
22uH
JL805
R803
18k
C833
0.1
C1308
680p
JL808
L802
47uH
C866
47
C823
1
C815
10
C865
47
D801
RB050L-60
C801
47
JL820
R815
0.039
1/2W
R832
1k
R811
0
R816
0.039
1/2W
35
VOUT0
VIN1
32
3.3
31
3.3
0.7
33
ADJ1
VOUT1
30
1.2
29
ADJ2
VOUT2
27
28
0.9
GND3
8.8
26
25
14.1
14.1
VIN2
SNSH
SNSL
GATE1
23
11.5
14.1
M
24
6.4
JL801
L1301
47uH
REGULATOR
IC803
BD49100RFS-E2
11.5
Q811
RSD046P05TL
N
14.1
12.1
ADJ5
EN
2
3.3
3.4
3.4
3
4
5
ECO
LD4EN
3.4
6
ERR2
ERR1
3.4
7
SDA
1.1
3.4
8
9
SYNC
SCL
0.6
10
11
12
RT
GND1
VOUT3
GND2
13
5
0.9
ADJ3
14
15
6.2
VIN3
16
6.4
0
17
18
CLCAL
VIN4
0
0
19
20
9.1
D1300
RSX205L-30TE25
6.4
TIMER
S
VOCAL
5.2
VOUT4
14.1
21
1.7
Q810
RSD046P05TL
FB1
11.5
INV1
22
S
0.9
S
14.1
L
IC1300
OZ539IGN-A1-0-TR
C1309
0.01
Q805
NVTFS5124PLTWG
Q810, 811
REGULATOR
1
MAIN
BOARD
(1/4)
5
VCC
VO
NC_7
VO_S
NC_6
GND
EN
NC_4
1
6
2
6
5.2
4
1
2
3
5.1
R1314
100k
3
VIN
VOUT
GND
STBY
NC
5
4
C846
10
3.3
JL1300
R408
0
JL804
P
IC805
Q
+1.2V REGULATOR
IC805
S-13A1A12-E6T1U3
4
3.3
R
MEX-M70BT
C851
4.7
5
6
SSC
VSS_5
VIN
ON/OFF
VSS_2
VOUT
3.3
3
2
1
R847
0
1.2
C852
4.7
7
7
Note: IC804 on the MAIN board cannot replace with single. When
this part is damaged, replace the complete mounted board.
MEX-M70BT
Ver. 1.3
2-6.
SCHEMATIC DIAGRAM - MAIN Board (4/4) 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
STB
BEEP
AMP_ATT
ACC_IN
BU_IN
B
SYNC_OUT
MAIN BOARD (4/4)
A
115
NC
0 116
Vss
R578 100
3.3 117
C539
0.1
M
C1344
1
C520
0.1
C526
22
C527
0.1
C569
0.1
C544
0.1
BT_CLK
BT_SYNC
DRV_ON
MEC_INSW
BT_DIN
R568 0
R657 100k
(3.3)
3.3
JL538
R605 100k
R606 100k
0
45
R590 100
0
ACC_IN
R609 100
(3.3)
DRV_ON 47
Vss 46
R608 0
3.3
PVcc 50
KEY_ACK1 49
XM_TX 48
MEC_INSW 51
0
BT_DOUT 54
BT_SYNC 53
BT_CLK 52
R599 100
0
3.3
R598 100k
R597 220k
CL513
3.3
BU_IN 56
BT_DIN 55
0
R594 0
1.2
Vcc 58
MEC_LIMIT 57
MEC_LOAD 60
KEY_ACK0 59
(3.3)
R658 100
3.3
R659 10k
R591 100k
R593 100
(0)
PVcc 62
Vss 61
DEBUG_RX 64
XM_RX 63
TBD 66
BT_RX 65
1.4
RTC_X1 67
RTC_X2 68
1.6
1.7
3.3
PLLVcc 69
1.7
Vss 72
XTAL 71
EXTAL 70
3.3
Vss 73
NMI 74
3.3
RES 76
Vss
75
CL522
CL523
3.3
NC 78
PVcc
77
3.3
CL521
1.2 (0.9)
33
1.3 (0.9)
DEC_SDIN_CH0
R629
R622 100
100
DEC_SDOUT_F
C553 10k
31
1.7
R631 10k
DEC_LRCK_IN
30
1.7
R632 10k
DEC_BCK_IN
29
0
R557 100
28
0
R624 100
27
0.4
26
3.3
25
0
33
32
30
29
BSIF_DO
28
CL512
27
CL539
R633 10k
BSIF_BCK
JL532
R646 10k
CD_SDO
7
31
26
MAIN
BOARD
(2/4)
(Page 6)
24
23
0.3
22
1.2
21
0.1
R627 100
JL531
CD_SDI
20
3.1
R634 100
JL533
CD_XCCE
18
3.3
R625 100
JL534
17
0
19
CD_BUSCLK
R635 100k
3.4
R533 0
3.3
R630 100
BSIF_ST_REQ
DSP_SSTBY
DSP_RST
0
DEC_INT
R528 0
0
BSIF_GATE
3.3
R637 100k
0.1
CD_ZDET
R683 0
0 (3.4)
DEC_XMUTE
1.2
R647 100k
3.3 (2.9)
SP_DATA
R648 100k
3.4
SP_CLK
R638 100
(3.3)
SERVO_ON
0
R592 100k
R639 100
R650 100
3
3.4
R640 100k
2
3.3
R641 100k
1
FB505
176
HIT2_RESET
ATT
FB504
R619
100
R651
100
JL530
3.4
175
174
PVcc
3.3
LCD_CLK
R662 10k
32
R615
100k
CL528
0
SF1_D1
Vss
USB_CHG_MOD1
173
172
171
0
SF1_D0
170
SF_CLK
SF1_D3
SF_CE
169
167
168
0
0
3.3
SF1_D2
166
3.3
0
165
NC
NC
164
163
Vss
USBUVss
Vss
162
161
USBUVcc
USBAVcc
USBAVss
159
C567
1
R614
100k
R612
100
R602
100
R642
100
C545
0.1
R649
100
R613
100k
R604 100
JL524
JL522
R603 100
JL525
R656 100
JL527
R601
100
R665
100
MEC_SELFSW
JL526
18
19
20
NOSE_SW
22
SIRCS
23
24
R552
470
R559
100k
D502
RB751V40,115
R558
100k
R576
100k
R565
470
R561
100
C522
8p
L504
4.7uH
R610
100
3.3
C534
22
X501
48MHz
L505
4.7uH
C535
0.1
C537
0.1
(Page 6)
1.2
34
JL523
R583
5.6k
C525
0.1
C518 7p
6
0
35
R553
100
17
MAIN
BOARD
(2/4)
CL525
C504
0.01
CL524
C530
22
CL530
C503
0.01
3.3
R544
33k
C532
0.1
158
BT_TX
RE_IN1
1.2
RE_IN0
USBAPVcc
NC
133
L
CL537
36
SERVO_ON 4
157
132
R540
33k
R623 1k
MEC_EJECT
CL529
37
BT_MIC_DET
NC
3.3
R511
1k
LCD_CE
R643
100k
38
SP_CLK 5
USBAPVss
0 131
CL536
AMP_ATT
REFRIN
0 130
RE_IN1
R628 1k
I2C1_SDA
156
3.3 129
0
SP_DATA 6
155
R539 2.2k
LCD_DATA
39
AMPSTB
154
R510
1k
3.3 128
CL535
I2C1_SCL
3.3
RE_IN0
R538 2.2k
R621 1k
3.3
Vcc 7
I2C0_SDA
1.3
2.8 127
3.4 125
R535 2.2k
R504 100
USBDVss
2.8 126
R506 100
USBDVcc
R505 100
CL504
R587 100
0
40
DEC_XMUTE 8
I2C0_SCL
153
CL503
I2C1_SDA
(0)
41
Vss 9
VBUSIN0
CL502
I2C1_SCL
42
CD_ZDET 10
MEC_DSW
152
I2C0_SDA
R534 2.2k
R503 100
PVcc
1.2
I2C0_SCL
1.1
PVcc 11
RE_ON
LRCK_IN
2.8
BSIF_GATE 12
Vss
4.5
3.4 124
RC_IN1
C549
0.1
FB501
43
DSP_RST 14
DEC_INT
13
Vcc
DP0
K
(0) 123
R655
0
44
DSP_SSTBY 15
USB_ON
DM0
3.3 122
JL528
CL501
Vss
CD_BUSCLK
USBDPVss
3.3 121
C507
0.1
C551
0.1
0.3
BSIF_ST_REQ 16
NC
151
R600
100
CD_SDO
CD_XCCE
150
120
Vcc
NC
BT_RST
3.3 119
Vss
CD_SDI
IC503
R7S7200022CFP
BT_PWR
R660 100
R560 100k
BSIF_BCK
SYSTEM CONTROLLER
USB_OVR2
114
1.2 118
R556
100
RC_IN1
USB_ON2
149
J
IC503
PVcc
0
USB_ON
PVcc
0
CL505
C511
0.1
BSIF_LR
USB_OVR
USBDPVcc
3.3 113
Vss
USBDVss
112
R517
100
BSIF_DO
148
3.4 111
R516 100
PWR_ECO
147
3.3 110
R529 100k
I
BEEP
Vcc
3.3
3.3 109
R514 100
DEC_BCK_IN
EN_SYS
USBDVcc
R515
100
DEC_LRCK_IN
146
3.3 108
Vss
145
3.4 107
R523 100k
D501
RB751V40,115
CL510
103
ILL_IN
3.4 105
0
3.3
DEC_SDOUT_F
Vss
106
R524
100
USB_OVR
R550
KEY_IN0 82
RC_IN0
81
NC
80
NC 79
DEC_SDIN_CH0
TCK
102
1.2
R682 100k
KEY_IN1 83
TMS
101
1.2 104
ECO
3.3
100
NC
3.3
Vcc
NC
R522 100
LCD_CLK
TDI
144
R521 100k
EN_SYS
99
Vss
TDO
143
3.3
TRST
98
NC
0
97
NC
USBDPVss
R548 10k
R549 100k
XM_PWR
142
3.3
Vcc
96
USBDPVcc
H
R520
100
R547 10k
LCD_CE
95
USB_X2
R501
100
0
3.3
PVcc
141
SYNC_OUT
R542 100
SYNC_ON
140
R546 10k
LCD_DO
139
R502
100
SYNC_OUT
3.3
16
I2C0_SCL
LRCK_INT
MEC_EJECT
1.7
R509
100
0
C550
0.1
C548
0.1
R644
100
Vss
USB_X1
15
3.3
C546
0.1
R526
100
NC
Vss
R545 10k
94
R654
0
R653
2.2k
AUDIO_X1
138
R525 100
R512
100
93
1.7
I2C0_SDA
3.3
CL511
3.3
1.2
13
14
92
MEC_SELFSW
0
137
CL508
R527
C543
0.1
C547
0.1
DEBUG_TX
SIRCS
11
PVcc
91
R507
0
10
12
BSCANP
90
DOOR_SW
G (Page 7)
C510
0.1
89
136
9
8
1.7
135
7
3.3
CL507
3.3
DEC_BCK_IN
6
8
0
(3.3)
5
CL509
USB_CHG_MOD2
R541
100k
ACC_IN
134
4
MAIN
BOARD
(3/4)
AVref 88
Vss
87
AVcc
86
NC
85
NC
84
XM_PWR
3
0
F
3.3
C506
0.1
2
MEC_LIMIT
MEC_LOAD
R519
100
R555
100
C505
0.1
1
C541 1
C531
15p
JL539
JL540
R582 100k
3.3
C515
0.1
160
C512
0.1
R586 100k
E
C508
0.001
0
KEY_IN1
R585 100k
R554
100
CL520
KEY_IN0
CL517
RC_IN0
R617
100k
C540
0.1
C523
0.1
C517
0.1
R551
100
C509
0.1
R607
100
R618
100
CL518
C516
1
C538
0.1
CL519
C560
47
C521
0.1
R579
270k
R681
100k
3.3
R684
0
R562
10k
C559
0.0033
R571
0
3.3
R563
10k
C519
0.1
R567
0
0
R566
10k
C501
100
10V
C528
10p
1.6
C529 0.1
C564
220
6.3V
3.3
R666 0
CT 3
X502
13.333MHz
VOUT 4
2 VDD
C533
15p
C570 2.2
C502
100
10V
D
1 GND
R573 100k
3.3
R513
100
R574
0
R572 100k
C
C571
0.1
C524
10p
X503
32.768kHz
IC501
RESET SIGNAL GENERATOR
IC501
BU4228F-STR
BT_DOUT
MEC_DSW
R680
100
C536
22
R616
0
R626
100k
C568 0.001
3.3
0
L501 15nH
3.3
L502 15nH
N
R652
100
CS
1
HOLD
DO
2
CLK
WP
3
GND
4
8
VCC
7
6
5
DI
0
0
JL529
BUS1
BUS2
IC502
ATT
R611
100
0
SERIAL FLASH
3
MAIN
BOARD
(1/4)
(Page 5)
IC502
MX25L3235EM2I-10G
MEX-M70BT
Note: When IC502 on the MAIN board is replaced, the destination setting is necessary. Refer
to “DESTINATION SETTING METHOD” on page 4 on original service manual.
8
8
MEX-M70BT
Ver. 1.3
MAIN
3. ELECTRICAL PARTS LIST
Note:
• Due to standardization, replacements in
the parts list may be different from the
parts specified in the diagrams or the components used on the set.
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
• Items marked “*” are not stocked since
they are seldom required for routine service. Some delay should be anticipated
when ordering these items.
• RESISTORS
All resistors are in ohms.
METAL: Metal-film resistor.
METAL OXIDE: Metal oxide-film resistor.
F: nonflammable
Ref. No.
• CAPACITORS
uF: μF
• COILS
uH: μH
• SEMICONDUCTORS
In each case, u: μ, for example:
uA. . : μA. . , uPA. . , μPA. . ,
uPB. . : μPB. . , uPC. . , μPC. . ,
uPD. . : μPD. .
Part No.
Description
Remark
A-2033-096-B
MAIN BOARD, COMPLETE (See Note)
********************
7-685-134-19
7-685-794-01
SCREW +P 2.6X8 TYPE2 NON-SLIT
SCREW +PTT 2.6X10 (S)
< CAPACITOR/RESISTOR >
Ref. No.
When indicating parts by reference number, please include the board name.
Part No.
Description
Remark
C326
1-114-813-11
CERAMIC CHIP 1uF
10%
16V
C328
C329
C330
C331
C332
1-164-866-11
1-118-347-11
1-164-866-11
1-164-866-11
1-118-361-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47PF
0.1uF
47PF
47PF
0.1uF
5%
10%
5%
5%
10%
50V
25V
50V
50V
50V
* C03
C05
C09
C010
C013
1-116-738-11
1-118-386-11
1-116-707-11
1-114-813-11
1-118-361-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.1uF
47uF
1uF
0.1uF
10%
10%
20%
10%
10%
6.3V
16V
10V
16V
50V
C333
C334
C335
C336
C337
1-164-866-11
1-128-996-11
1-128-996-11
1-128-996-11
1-128-996-11
CERAMIC CHIP
ELECT CHIP
ELECT CHIP
ELECT CHIP
ELECT CHIP
47PF
4.7uF
4.7uF
4.7uF
4.7uF
5%
20%
20%
20%
20%
50V
50V
50V
50V
50V
C014
C015
C102
* C103
C104
1-114-813-11
1-115-416-11
1-116-716-11
1-116-738-11
1-118-290-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.001uF
10uF
1uF
0.001uF
10%
5%
10%
10%
10%
16V
25V
16V
6.3V
50V
C338
C339
C340
C341
C342
1-162-923-11
1-162-923-11
1-162-923-11
1-162-923-11
1-162-923-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47PF
47PF
47PF
47PF
47PF
5%
5%
5%
5%
5%
50V
50V
50V
50V
50V
C105
C106
* C107
C109
C301
1-118-477-11
1-118-290-11
1-116-738-11
1-118-347-11
1-164-866-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
2.2uF
0.001uF
1uF
0.1uF
47PF
10%
10%
10%
10%
5%
6.3V
50V
6.3V
25V
50V
C343
C400
C401
C402
C404
1-162-923-11
1-118-047-11
1-128-992-21
1-114-813-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
47PF
10uF
47uF
1uF
0.1uF
5%
10%
20%
10%
10%
50V
16V
25V
16V
16V
C302
C303
C304
C305
C306
1-164-866-11
1-112-839-11
1-164-866-11
1-164-866-11
1-118-361-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47PF
4700uF
47PF
47PF
0.1uF
5%
20%
5%
5%
10%
50V
16V
50V
50V
50V
C405
C406
* C407
C408
C409
1-162-923-11
1-124-779-00
1-118-035-11
1-162-923-11
1-124-779-00
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
47PF
10uF
0.1uF
47PF
10uF
5%
20%
10%
5%
20%
50V
16V
25V
50V
16V
C307
C308
C309
C310
C311
1-114-813-11
1-164-866-11
1-164-866-11
1-118-347-11
1-164-866-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
47PF
47PF
0.1uF
47PF
10%
5%
5%
10%
5%
16V
50V
50V
25V
50V
C410
C411
C412
C413
C414
1-124-779-00
1-162-923-11
1-100-966-91
1-118-386-11
1-162-923-11
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10uF
47PF
10uF
0.1uF
47PF
20%
5%
20%
10%
5%
16V
50V
10V
16V
50V
C312
C313
C314
C315
C316
1-118-347-11
1-164-866-11
1-118-930-11
1-164-866-11
1-114-813-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
47PF
10uF
47PF
1uF
10%
5%
10%
5%
10%
25V
50V
10V
50V
16V
C415
C416
C417
C418
C419
1-116-865-11
1-124-779-00
1-116-728-11
1-162-923-11
1-162-923-11
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10uF
10uF
2.2uF
47PF
47PF
10%
20%
10%
5%
5%
25V
16V
10V
50V
50V
C317
C318
C319
C320
C321
1-114-813-11
1-114-813-11
1-114-813-11
1-114-813-11
1-114-813-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
1uF
1uF
1uF
1uF
10%
10%
10%
10%
10%
16V
16V
16V
16V
16V
* C420
* C421
* C422
C423
C424
1-116-738-11
1-116-738-11
1-116-738-11
1-118-389-11
1-118-389-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
1uF
1uF
0.022uF
0.022uF
10%
10%
10%
10%
10%
6.3V
6.3V
6.3V
25V
25V
C322
C323
C324
C325
1-114-813-11
1-114-813-11
1-164-866-11
1-114-813-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
1uF
47PF
1uF
10%
10%
5%
10%
16V
16V
50V
16V
C425
C441
C442
C443
1-116-728-11
1-164-866-11
1-164-866-11
1-164-866-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
2.2uF
47PF
47PF
47PF
10%
5%
5%
5%
10V
50V
50V
50V
Note: When the complete MAIN board is replaced, it is necessary to replace knob (VOL) (SV) assy simultaneously. Also, the
destination setting, Bluetooth operation check and Bluetooth information writing is necessary. Refer to “DESTINATION
SETTING METHOD” on page 4, “BLUETOOTH FUNCTION CHECKING METHOD USING A CELLULAR PHONE”
on page 7 and “BLUETOOTH INFORMATION WRITING METHOD” on page 8 on original service manual.
9
MEX-M70BT
MAIN
Ref. No.
Part No.
Description
Part No.
Description
C444
1-164-866-11
CERAMIC CHIP 47PF
5%
50V
C571
1-118-361-11
CERAMIC CHIP 0.1uF
10%
50V
C445
C446
C501
C502
C503
1-164-866-11
1-114-599-21
1-165-492-21
1-165-492-21
1-118-345-11
CERAMIC CHIP
ELECT CHIP
ELECT CHIP
ELECT CHIP
CERAMIC CHIP
47PF
10uF
100uF
100uF
0.01uF
5%
20%
20%
20%
10%
50V
35V
10V
10V
25V
C702
* C704
C705
* C706
* C707
1-118-386-11
1-116-738-11
1-118-386-11
1-116-738-11
1-116-738-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
1uF
0.1uF
1uF
1uF
10%
10%
10%
10%
10%
16V
6.3V
16V
6.3V
6.3V
C504
C505
C506
C507
C508
1-118-459-11
1-118-386-11
1-118-386-11
1-118-386-11
1-118-290-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.1uF
0.1uF
0.1uF
0.001uF
10%
10%
10%
10%
10%
25V
16V
16V
16V
50V
C711
C712
C714
C715
C716
1-118-386-11
1-118-386-11
1-118-388-11
1-118-477-11
1-118-477-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.047uF
2.2uF
2.2uF
10%
10%
10%
10%
10%
16V
16V
25V
6.3V
6.3V
C509
C510
C511
C512
C515
1-118-386-11
1-118-386-11
1-118-386-11
1-118-386-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
16V
16V
16V
16V
16V
C717
* C718
C719
C720
* C721
1-118-388-11
1-118-407-11
1-118-386-11
1-116-707-11
1-118-407-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.047uF
470PF
0.1uF
47uF
470PF
10%
10%
10%
20%
10%
25V
50V
16V
10V
50V
C516
C517
C518
C519
C520
1-165-908-11
1-118-386-11
1-164-847-11
1-118-386-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.1uF
7PF
0.1uF
0.1uF
10%
10%
0.5PF
10%
10%
10V
16V
50V
16V
16V
C722
C723
C725
C727
C728
1-118-386-11
1-118-459-11
1-118-403-11
1-118-386-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.01uF
0.001uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
16V
25V
50V
16V
16V
C521
C522
C523
C524
C525
1-118-386-11
1-164-848-11
1-118-386-11
1-164-850-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
8PF
0.1uF
10PF
0.1uF
10%
0.5PF
10%
0.5PF
10%
16V
50V
16V
50V
16V
C729
C730
C731
C732
C734
1-165-908-11
1-118-386-11
1-116-733-11
1-118-386-11
1-118-394-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.1uF
1uF
0.1uF
0.0056uF
10%
10%
10%
10%
10%
10V
16V
25V
16V
50V
C526
C527
C528
C529
C530
1-116-711-11
1-118-386-11
1-164-850-11
1-118-386-11
1-116-711-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
22uF
0.1uF
10PF
0.1uF
22uF
20%
10%
0.5PF
10%
20%
16V
16V
50V
16V
16V
C735
C736
C737
C738
C739
1-127-772-81
1-115-416-11
1-118-397-11
1-118-397-11
1-118-397-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.033uF
0.001uF
0.0033uF
0.0033uF
0.0033uF
10%
5%
10%
10%
10%
10V
25V
50V
50V
50V
C531
C532
C533
C534
C535
1-164-854-11
1-118-386-11
1-164-854-11
1-116-711-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
15PF
0.1uF
15PF
22uF
0.1uF
5%
10%
5%
20%
10%
50V
16V
50V
16V
16V
C740
C741
C742
C743
C744
1-118-397-11
1-118-397-11
1-118-386-11
1-124-778-00
1-128-996-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
ELECT CHIP
0.0033uF
0.0033uF
0.1uF
22uF
4.7uF
10%
10%
10%
20%
20%
50V
50V
16V
6.3V
50V
C536
C537
C538
C539
C540
1-116-711-11
1-118-386-11
1-118-386-11
1-118-386-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
22uF
0.1uF
0.1uF
0.1uF
0.1uF
20%
10%
10%
10%
10%
16V
16V
16V
16V
16V
C745
C746
C747
C748
C749
1-118-386-11
1-128-996-11
1-118-386-11
1-128-996-11
1-165-908-11
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
0.1uF
4.7uF
0.1uF
4.7uF
1uF
10%
20%
10%
20%
10%
16V
50V
16V
50V
10V
C541
C543
C544
C545
C546
1-116-737-11
1-118-386-11
1-118-386-11
1-118-386-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.1uF
0.1uF
0.1uF
0.1uF
20%
10%
10%
10%
10%
10V
16V
16V
16V
16V
C750
C751
C754
C755
C756
1-128-996-11
1-116-728-11
1-118-386-11
1-118-403-11
1-164-852-11
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
4.7uF
2.2uF
0.1uF
0.001uF
12PF
20%
10%
10%
10%
5%
50V
10V
16V
50V
50V
C547
C548
C549
C550
C551
1-118-386-11
1-118-386-11
1-118-386-11
1-118-386-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
16V
16V
16V
16V
16V
C758
C759
C760
C761
C762
1-118-386-11
1-118-386-11
1-127-988-81
1-118-386-11
1-100-579-81
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.015uF
0.1uF
0.0056uF
10%
10%
10%
10%
10%
16V
16V
16V
16V
25V
C553
C559
C560
C564
C566
1-216-833-11
1-164-940-11
1-116-707-11
1-100-354-21
1-118-386-11
METAL CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
10K
0.0033uF
47uF
220uF
0.1uF
5%
10%
20%
20%
10%
1/10W
16V
10V
6.3V
16V
C763
C764
C765
C766
C767
1-164-852-11
1-118-345-11
1-118-477-11
1-118-399-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
12PF
0.01uF
2.2uF
0.0022uF
0.1uF
5%
10%
10%
10%
10%
50V
25V
6.3V
50V
16V
* C567
C568
C569
C570
1-116-738-11
1-115-416-11
1-118-361-11
1-118-477-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.001uF
0.1uF
2.2uF
10%
5%
10%
10%
6.3V
25V
50V
6.3V
C768
C769
C770
C771
1-118-459-11
1-116-728-11
1-118-459-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
2.2uF
0.01uF
0.1uF
10%
10%
10%
10%
25V
10V
25V
16V
10
Remark
Ref. No.
Remark
MEX-M70BT
Ver. 1.3
MAIN
Ref. No.
Part No.
Description
Part No.
Description
C772
1-118-477-11
CERAMIC CHIP 2.2uF
10%
6.3V
Remark
Ref. No.
C865
1-118-929-11
CERAMIC CHIP 47uF
10%
16V
Remark
C773
C775
C777
C779
C780
1-116-728-11
1-116-728-11
1-116-728-11
1-116-728-11
1-118-399-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
2.2uF
2.2uF
2.2uF
2.2uF
0.0022uF
10%
10%
10%
10%
10%
10V
10V
10V
10V
50V
C866
C867
* C872
C874
C876
1-118-929-11
1-100-769-21
1-118-407-11
1-162-923-11
1-118-359-11
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47uF
470uF
470PF
47PF
10uF
10%
20%
10%
5%
10%
16V
16V
50V
50V
16V
C781
C782
C783
C786
C787
1-118-399-11
1-118-386-11
1-127-988-81
1-165-908-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.0022uF
0.1uF
0.015uF
1uF
0.1uF
10%
10%
10%
10%
10%
50V
16V
16V
10V
16V
C878
C1004
C1005
C1006
C1008
1-116-728-11
1-116-737-11
1-116-707-11
1-118-386-11
1-118-040-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
2.2uF
1uF
47uF
0.1uF
2.2uF
10%
20%
20%
10%
10%
10V
10V
10V
16V
16V
C788
C790
C793
C801
C803
1-118-386-11
1-118-386-11
1-164-866-11
1-118-929-11
1-118-290-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
47PF
47uF
0.001uF
10%
10%
5%
10%
10%
16V
16V
50V
16V
50V
C1009
* C1010
* C1011
* C1012
C1013
1-118-040-11
1-116-738-11
1-116-738-11
1-116-738-11
1-118-388-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
2.2uF
1uF
1uF
1uF
0.047uF
10%
10%
10%
10%
10%
16V
6.3V
6.3V
6.3V
25V
C804
C805
C806
C807
C809
1-118-290-11
1-118-405-11
1-118-386-11
1-118-403-11
1-118-393-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
680PF
0.1uF
0.001uF
0.0068uF
10%
10%
10%
10%
10%
50V
50V
16V
50V
50V
* C1014
C1016
C1017
C1018
C1019
1-116-738-11
1-116-716-11
1-118-403-11
1-116-724-11
1-116-741-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
10uF
0.001uF
4.7uF
0.47uF
10%
10%
10%
20%
20%
6.3V
16V
50V
6.3V
10V
C810
C811
C812
C813
C814
1-164-850-11
1-164-874-11
1-114-813-11
1-116-712-11
1-135-366-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
10PF
100PF
1uF
22uF
100uF
0.5PF
5%
10%
10%
20%
50V
50V
16V
10V
16V
C1050
C1052
C1054
C1094
C1301
1-118-290-11
1-118-386-11
1-118-290-11
1-118-386-11
1-118-932-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
0.1uF
0.001uF
0.1uF
10uF
10%
10%
10%
10%
10%
50V
16V
50V
16V
16V
C815
C816
C817
C818
C819
1-118-359-11
1-164-874-11
1-118-386-11
1-118-359-11
1-118-359-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10uF
100PF
0.1uF
10uF
10uF
10%
5%
10%
10%
10%
16V
50V
16V
16V
16V
C1303
C1304
C1306
C1307
C1308
1-118-932-11
1-116-733-11
1-118-929-11
1-118-931-11
1-162-963-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10uF
1uF
47uF
22uF
680PF
10%
10%
10%
10%
10%
16V
25V
16V
10V
50V
C820
C821
C822
* C823
C825
1-116-740-11
1-116-716-11
1-116-716-11
1-116-738-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.47uF
10uF
10uF
1uF
0.1uF
10%
10%
10%
10%
10%
16V
16V
16V
6.3V
16V
C1309
C1310
C1312
C1313
C1314
1-118-391-11
1-135-366-11
1-118-459-11
1-100-055-21
1-162-915-11
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
100uF
0.01uF
22uF
10PF
10%
20%
10%
20%
0.5PF
50V
16V
25V
16V
50V
C827
C828
* C829
* C830
C831
1-114-813-11
1-114-813-11
1-118-407-11
1-118-407-11
1-100-769-21
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
1uF
1uF
470PF
470PF
470uF
10%
10%
10%
10%
20%
16V
16V
50V
50V
16V
C1315
C1316
C1317
C1318
C1320
1-162-915-11
1-118-391-11
1-118-386-11
1-118-278-91
1-100-159-91
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10PF
0.01uF
0.1uF
2.2uF
22uF
0.5PF
10%
10%
10%
10%
50V
50V
16V
10V
6.3V
C832
C833
C834
C835
C837
1-118-386-11
1-118-386-11
1-118-359-11
1-100-769-21
1-100-769-21
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
ELECT CHIP
0.1uF
0.1uF
10uF
470uF
470uF
10%
10%
10%
20%
20%
16V
16V
16V
16V
16V
C1321
C1322
C1323
C1324
* C1325
1-118-386-11
1-118-386-11
1-118-480-11
1-116-737-11
1-116-738-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
4.7uF
1uF
1uF
10%
10%
10%
20%
10%
16V
16V
6.3V
10V
6.3V
C838
C839
C840
C841
C843
1-118-386-11
1-164-878-11
1-116-739-11
1-116-739-11
1-118-403-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
150PF
0.47uF
0.47uF
0.001uF
10%
5%
10%
10%
10%
16V
50V
50V
50V
50V
C1326
C1327
C1328
C1329
C1330
1-118-386-11
1-118-480-11
1-118-480-11
1-118-386-11
1-116-707-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
4.7uF
4.7uF
0.1uF
47uF
10%
10%
10%
10%
20%
16V
6.3V
6.3V
16V
10V
C844
C845
C846
C847
C848
1-100-764-21
1-114-813-11
1-116-716-11
1-118-955-11
1-118-929-11
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
4.7uF
1uF
10uF
22uF
47uF
20%
10%
10%
20%
10%
25V
16V
16V
16V
16V
C1331
C1332
C1333
C1334
C1336
1-116-737-11
1-118-386-11
1-118-386-11
1-118-386-11
1-162-923-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.1uF
0.1uF
0.1uF
47PF
20%
10%
10%
10%
5%
10V
16V
16V
16V
50V
C850
C851
C852
C861
1-118-359-11
1-112-746-11
1-112-746-11
1-116-716-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10uF
4.7uF
4.7uF
10uF
10%
10%
10%
10%
16V
6.3V
6.3V
16V
C1337
C1338
C1339
C1341
1-118-386-11
1-162-923-11
1-118-045-11
1-118-403-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
47PF
2.2uF
0.001uF
10%
5%
10%
10%
16V
50V
25V
50V
11
MEX-M70BT
Ver. 1.3
MAIN
Ref. No.
Part No.
Description
Part No.
Description
C1342
1-118-403-11
CERAMIC CHIP 0.001uF
10%
50V
Remark
Ref. No.
FB1003
1-500-113-22
BEAD, FERRITE (CHIP) (1608)
Remark
* C1344
C1353
C1358
1-116-738-11
1-118-361-11
1-162-966-91
CERAMIC CHIP 1uF
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.0022uF
10%
10%
10%
6.3V
50V
50V
FB1004
FB1005
FB1300
FB1301
1-500-113-22
1-500-113-22
1-469-094-21
1-469-094-21
BEAD, FERRITE (CHIP) (1608)
BEAD, FERRITE (CHIP) (1608)
FERRITE, EMI (SMD) (1608)
FERRITE, EMI (SMD) (1608)
< CONNECTOR >
< IC/BT MODULE >
CN101
CN301
CN701
CN801
1-842-266-22
1-843-330-11
1-843-775-11
1-779-886-11
CN1002
1-821-559-11
SOCKET, CONNECTOR 20P
PIN, CONNECTOR 16P
CONNECTOR, FFC/FPC (ZIF) 27P
SOCKET, MINIATURE DIN CONNECTOR
(SIRIUSXM IN)
CONNECTOR, COAXIAL (SMT TYPE)
CN1004
CN1300
1-784-650-21
1-779-993-11
CONNECTOR 2P
PIN, CONNECTOR (PWB) 5P
< DIODE >
D114
D301
D303
D304
D401
6-502-969-01
6-503-548-01
6-503-238-01
6-502-961-01
6-502-961-01
DIODE
DIODE
DIODE
DIODE
DIODE
DZ2J06800L
DB2441600L
GN1G
DA2J10100L
DA2J10100L
D501
D502
D801
D802
D805
6-503-759-01
6-503-759-01
6-504-041-01
6-502-972-01
6-503-031-01
DIODE
DIODE
DIODE
DIODE
DIODE
RB751V40, 115
RB751V40, 115
RB050L-60
DZ2J09100L
DZ2J18000L
* D806
D808
D809
D811
D812
6-503-973-01
6-503-031-01
6-503-031-01
6-503-031-01
6-503-238-01
DIODE
DIODE
DIODE
DIODE
DIODE
RSX205L-30TE25
DZ2J18000L
DZ2J18000L
DZ2J18000L
GN1G
D813
D814
D816
D817
D818
6-503-031-01
6-502-961-01
6-504-047-01
6-503-016-01
6-503-031-01
DIODE
DIODE
DIODE
DIODE
DIODE
DZ2J18000L
DA2J10100L
RSX051VA-30
DZ2J07500L
DZ2J18000L
6-502-969-01
6-502-969-01
6-502-969-01
6-503-973-01
6-503-759-01
DIODE
DIODE
DIODE
DIODE
DIODE
DZ2J06800L
DZ2J06800L
DZ2J06800L
RSX205L-30TE25
RB751V40, 115
D1001
D1002
D1003
* D1300
D1306
< FUSE >
F801
1-576-415-11
FUSE (2 A/32 V)
< FERRITE BEAD >
FB02
FB101
FB302
FB404
FB501
1-400-334-21
1-500-113-22
1-481-746-11
1-500-113-22
1-500-113-22
FERRITE, EMI (SMD) (1608)
BEAD, FERRITE (CHIP) (1608)
SDM EMI FERRITE
BEAD, FERRITE (CHIP) (1608)
BEAD, FERRITE (CHIP) (1608)
FB504
FB505
FB702
FB703
FB801
1-500-113-22
1-400-823-11
1-469-084-21
1-469-084-21
1-500-113-22
BEAD, FERRITE (CHIP) (1608)
EMI FERRITE (SMD) (1005)
INDUCTOR, FERRITE BEAD (1005)
INDUCTOR, FERRITE BEAD (1005)
BEAD, FERRITE (CHIP) (1608)
FB802
FB803
FB804
FB805
1-500-113-22
1-500-113-22
1-500-113-22
1-500-113-22
BEAD, FERRITE (CHIP) (1608)
BEAD, FERRITE (CHIP) (1608)
BEAD, FERRITE (CHIP) (1608)
BEAD, FERRITE (CHIP) (1608)
IC301
IC401
IC402
IC501
IC502
6-720-774-01
6-721-140-01
6-721-168-01
6-719-855-01
6-721-462-01
IC
IC
IC
IC
IC
PURE5001H-4WX
NJW4190R-A (TE2)
BD3468FV-E2
BU4228F-STR
MX25L3235EM2I-10G-A01 (for SERVICE)
(See Note 1)
IC503
IC504
IC702
IC703
IC704
6-721-336-01
6-710-376-01
6-717-694-01
6-716-355-01
6-716-355-01
IC
IC
IC
IC
IC
R7S7200022CFP
74LVC1G17GW-125
BU33TD3WG-TR
BU15TD3WG-TR
BU15TD3WG-TR
IC705
IC801
IC802
IC803
IC804
6-715-712-11
6-709-182-01
6-710-376-01
6-721-184-01
(Not supplied)
IC
IC
IC
IC
IC
TC94A99FG-003 (SYCH
TC7WH126FK
74LVC1G17GW-125
BD49100RFS-E2
BD60HC0WEFJ-E2 (See Note 2)
IC805
IC1001
IC1002
IC1003
IC1009
6-719-012-01
6-717-694-01
(Not supplied)
6-703-863-01
6-718-324-01
IC S-13A1A12-E6T1U3
IC BU33TD3WG-TR
BT MODULE (WB113C) (See Note 2)
IC NJM2781RB1
IC MFI337S3959
IC1051
IC1300
IC1301
IC1302
6-716-858-01
6-718-913-01
6-718-416-01
6-717-694-01
IC
IC
IC
IC
< JACK >
J001
J401
J801
J1001
1-843-791-11
1-822-714-21
1-566-822-81
1-566-822-91
JACK (ANT) (ANTENNA IN)
JACK, PIN 6P (FRONT/REAR/SUB AUDIO OUT)
JACK (REMOTE IN)
JACK (MIC)
< COIL >
L01
L301
L401
L501
L502
1-400-073-21
1-456-617-11
1-469-844-11
1-414-842-21
1-414-842-21
INDUCTOR
COIL, CHOKE
INDUCTOR
INDUCTOR
INDUCTOR
4.7uH
L504
L505
L801
L802
L1301
1-400-073-21
1-400-073-21
1-460-704-11
1-481-904-11
1-481-904-11
INDUCTOR
INDUCTOR
COIL, CHOKE
INDUCTOR
INDUCTOR
4.7uH
4.7uH
22uH
47uH
47uH
L1302
L1303
L1304
L1305
L1307
1-414-842-21
1-414-842-21
1-414-842-21
1-414-842-21
1-457-223-11
INDUCTOR
15nH
INDUCTOR
15nH
INDUCTOR
15nH
INDUCTOR
15nH
COMMON MODE CHOKE COIL
2.2uH
15nH
15nH
< TRANSISTOR >
Q401
Q402
Q403
Q404
Note 1: When IC502 on the MAIN board is replaced, the destination
setting is necessary. Refer to “DESTINATION SETTING
METHOD” on page 4 on original service manual.
12
NLASB3157DFT2G
OZ539IGN-A1-0-TR
uPD720114GA-YEU-AT-SAK
BU33TD3WG-TR
6-552-936-01
6-552-922-01
6-552-856-01
6-552-856-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
LTC014EUBFS8TL
LTA014EUBFS8TL
LTC914TUBFS8TL
LTC914TUBFS8TL
Note 2: IC804 and IC1002 on the MAIN board cannot replace
with single. When these parts are damaged, replace
the complete mounted board.
MEX-M70BT
MAIN
Ref. No.
Part No.
Description
Q405
6-552-856-01
TRANSISTOR
LTC914TUBFS8TL
Remark
Q406
Q407
Q408
Q701
Q801
6-552-856-01
6-552-856-01
6-552-856-01
6-551-120-01
6-552-936-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
LTC914TUBFS8TL
LTC914TUBFS8TL
LTC914TUBFS8TL
2SA2119K
LTC014EUBFS8TL
Q802
Q803
Q805
Q806
Q807
6-552-922-01
6-553-498-01
6-553-497-01
6-552-892-01
6-552-892-01
TRANSISTOR
FET
FET
TRANSISTOR
TRANSISTOR
LTA014EUBFS8TL
NTTFS5116PLTWG
NVTFS5124PLTWG
LSCR523UBFS8TL
LSCR523UBFS8TL
Q808
Q810
Q811
Q812
Q813
6-552-922-01
6-553-496-01
6-553-496-01
6-552-949-01
6-552-936-01
TRANSISTOR
FET
FET
TRANSISTOR
TRANSISTOR
LTA014EUBFS8TL
RSD046P05TL
RSD046P05TL
LTC044EUBFS8TL
LTC014EUBFS8TL
Q814
6-552-892-01
TRANSISTOR
LSCR523UBFS8TL
< RESISTOR >
R02
R09
R10
R11
R012
1-216-864-11
1-218-953-11
1-218-990-81
1-218-941-81
1-216-864-11
SHORT CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
SHORT CHIP
0
1K
0
100
0
R21
R102
R103
R104
R105
1-216-864-11
1-216-864-11
1-216-825-11
1-216-817-11
1-218-966-11
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
0
2.2K
470
12K
R107
R108
R301
R302
R303
1-218-966-11
1-216-817-11
1-216-214-00
1-216-864-11
1-218-965-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
12K
470
4.7K
0
10K
R304
R305
R306
R307
R308
1-216-864-11
1-218-953-11
1-218-953-11
1-218-953-11
1-218-953-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
1K
1K
1K
1K
R309
R310
R311
R312
R315
1-218-943-11
1-218-973-11
1-216-864-11
1-218-973-11
1-216-833-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
R316
R317
R318
R319
R320
1-250-515-11
1-216-833-11
1-250-515-11
1-250-515-11
1-216-833-11
R321
R322
R323
R401
R404
R406
R407
R408
R409
R410
5%
1/16W
5%
1/16W
Ref. No.
Part No.
Description
R411
R412
R413
R414
R415
1-250-519-11
1-216-296-11
1-250-600-11
1-250-656-11
1-250-515-11
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
0
220
47K
6.8K
Remark
R416
R417
R420
R421
R422
1-216-864-11
1-250-656-11
1-250-519-11
1-250-600-11
1-250-600-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
47K
10K
220
220
R423
R424
R425
R426
R427
1-250-656-11
1-218-990-81
1-218-990-81
1-218-990-81
1-218-990-81
METAL CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
47K
0
0
0
0
R428
R429
R430
R431
R432
1-218-990-81
1-218-990-81
1-218-990-81
1-218-990-81
1-250-656-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
R433
R434
R435
R436
R437
1-250-600-11
1-250-600-11
1-250-656-11
1-250-656-11
1-218-953-11
R438
R439
R440
R501
R502
1%
1/16W
1%
1%
1%
1/10W
1/10W
1/16W
1%
1%
1%
1%
1/10W
1/16W
1/10W
1/10W
1%
1/10W
0
0
0
0
47K
1%
1/10W
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
220
220
47K
47K
1K
1%
1%
1%
1%
5%
1/10W
1/10W
1/10W
1/10W
1/16W
1-250-600-11
1-218-990-81
1-218-990-81
1-218-941-81
1-218-941-81
METAL CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
220
0
0
100
100
1%
1/10W
5%
5%
1/16W
1/16W
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
1-216-864-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
100
100
100
100
0
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
5%
5%
5%
1/10W
1/10W
1/16W
5%
5%
5%
1/16W
1/10W
1/8W
5%
1/16W
R503
R504
R505
R506
R507
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R509
R510
R511
R512
R513
1-218-941-81
1-218-953-11
1-218-953-11
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
1K
1K
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
150
47K
0
47K
10K
5%
5%
1/16W
1/16W
5%
5%
1/16W
1/10W
R514
R515
R516
R517
R519
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
6.8K
10K
6.8K
6.8K
10K
1%
5%
1%
1%
5%
1/16W
1/10W
1/16W
1/16W
1/10W
R520
R521
R522
R523
R524
1-218-941-81
1-218-977-11
1-218-941-81
1-218-977-11
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100K
100
100K
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
1-250-515-11
1-216-833-11
1-218-990-81
1-218-933-11
1-208-939-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
6.8K
10K
0
22
150K
1%
5%
1/16W
1/10W
METAL CHIP
METAL CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
100
100
0
0
100K
1/16W
1/16W
1/16W
1/16W
1-218-941-81
1-218-941-81
1-218-990-81
1-218-990-81
1-218-977-11
5%
5%
5%
0.5%
R525
R526
R527
R528
R529
5%
1/16W
1-216-864-11
1-216-296-11
1-216-296-11
1-216-296-11
1-216-295-91
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
0
0
0
0
0
R533
R534
R535
R538
R539
1-218-990-81
1-218-957-11
1-218-957-11
1-218-957-11
1-218-957-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
2.2K
2.2K
2.2K
2.2K
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
13
MEX-M70BT
MAIN
Ref. No.
Part No.
Description
Part No.
Description
R540
R541
R542
R544
R545
1-218-971-81
1-218-977-11
1-218-941-81
1-218-971-81
1-218-965-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
33K
100K
100
33K
10K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R613
R614
R615
R616
R617
1-218-977-11
1-218-977-11
1-218-977-11
1-218-990-81
1-218-977-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
100K
100K
100K
0
100K
5%
5%
5%
1/16W
1/16W
1/16W
5%
1/16W
R546
R547
R548
R549
R550
1-218-965-11
1-218-965-11
1-218-965-11
1-218-977-11
1-218-990-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
10K
10K
10K
100K
0
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R618
R619
R621
R622
R623
1-218-941-81
1-218-941-81
1-218-953-11
1-218-941-81
1-218-953-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
1K
100
1K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R551
R552
R553
R554
R555
1-216-809-11
1-218-949-11
1-218-941-81
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
470
100
100
100
5%
5%
5%
5%
5%
1/10W
1/16W
1/16W
1/10W
1/10W
R624
R625
R626
R627
R628
1-218-941-81
1-218-941-81
1-218-977-11
1-218-941-81
1-218-953-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100K
100
1K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R556
R557
R558
R559
R560
1-216-809-11
1-218-941-81
1-218-977-11
1-218-977-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100K
100K
100K
5%
5%
5%
5%
5%
1/10W
1/16W
1/16W
1/16W
1/10W
R629
R630
R631
R632
R633
1-218-941-81
1-218-941-81
1-218-965-11
1-218-965-11
1-218-965-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
10K
10K
10K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R561
R562
R563
R565
R566
1-218-941-81
1-250-519-11
1-250-519-11
1-218-949-11
1-250-519-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
10K
10K
470
10K
5%
1%
1%
5%
1%
1/16W
1/16W
1/16W
1/16W
1/16W
R634
R635
R637
R638
R639
1-218-941-81
1-218-977-11
1-218-977-11
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100K
100K
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R567
R568
R571
R572
R573
1-218-990-81
1-218-990-81
1-218-990-81
1-218-977-11
1-218-977-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
0
0
0
100K
100K
5%
5%
1/16W
1/16W
R640
R641
R642
R643
R644
1-218-977-11
1-218-977-11
1-218-941-81
1-218-977-11
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
100
100K
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R574
R576
R578
R579
R582
1-218-990-81
1-218-977-11
1-218-941-81
1-250-553-11
1-218-977-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
100K
100
270K
100K
5%
5%
1%
5%
1/16W
1/16W
1/16W
1/16W
R646
R647
R648
R649
R650
1-218-965-11
1-218-977-11
1-218-977-11
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
100K
100K
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
* R583
R585
R586
R587
R590
1-250-513-11
1-218-977-11
1-218-977-11
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
5.6K
100K
100K
100
100
1%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R651
R652
R653
R654
R655
1-218-941-81
1-218-941-81
1-218-957-11
1-218-990-81
1-216-864-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
SHORT CHIP
100
100
2.2K
0
0
5%
5%
5%
1/16W
1/16W
1/16W
R591
R592
R593
R594
R597
1-218-977-11
1-218-977-11
1-218-941-81
1-218-990-81
1-218-981-81
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
100K
100K
100
0
220K
5%
5%
5%
1/16W
1/16W
1/16W
5%
1/16W
R656
R657
R658
R659
R660
1-218-941-81
1-218-977-11
1-218-941-81
1-216-833-11
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100K
100
10K
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/10W
1/16W
R598
R599
R600
R601
R602
1-218-977-11
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100
100
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R662
R665
R666
R680
R681
1-218-965-11
1-218-941-81
1-216-296-11
1-218-941-81
1-218-977-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
10K
100
0
100
100K
5%
5%
1/16W
1/16W
5%
5%
1/16W
1/16W
R603
R604
R605
R606
R607
1-218-941-81
1-218-941-81
1-218-977-11
1-218-977-11
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100K
100K
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R682
R683
R684
R701
R702
1-218-977-11
1-218-990-81
1-216-295-91
1-216-864-11
1-218-990-81
METAL CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
100K
0
0
0
0
5%
1/16W
R608
R609
R610
R611
R612
1-218-990-81
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
100
100
100
100
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R703
R704
R705
R706
R707
1-216-864-11
1-216-864-11
1-218-990-81
1-216-864-11
1-216-864-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
0
0
0
0
0
14
Remark
Ref. No.
Remark
MEX-M70BT
Ver. 1.3
MAIN
Ref. No.
Part No.
Description
R708
R709
R711
R712
R714
1-216-864-11
1-218-953-11
1-216-864-11
1-242-967-11
1-208-637-11
SHORT CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
0
1K
0
1
12
Remark
R715
R717
R718
R719
R720
1-216-864-11
1-218-990-81
1-218-941-81
1-218-941-81
1-218-990-81
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
0
0
100
100
0
R721
R722
R723
R724
R725
1-218-941-81
1-218-941-81
1-218-941-81
1-218-947-11
1-218-947-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
R726
R727
R728
R729
R731
1-218-969-11
1-218-990-81
1-218-969-11
1-218-947-11
1-216-864-11
R732
R733
R734
R735
R737
5%
1/16W
5%
0.5%
1/16W
1/16W
Ref. No.
Part No.
Description
R815
R816
R817
R818
R819
1-257-321-11
1-257-321-11
1-216-864-11
1-218-966-11
1-216-845-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
0.039
0.039
0
12K
100K
1%
1%
1/2W
1/2W
Remark
5%
5%
1/16W
1/10W
R821
R822
R823
R825
R826
1-216-821-11
1-250-602-11
1-250-632-11
1-208-923-11
1-208-946-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
270
4.7K
33K
300K
5%
1%
1%
0.5%
0.5%
1/10W
1/10W
1/10W
1/16W
1/16W
5%
5%
1/16W
1/16W
100
100
100
330
330
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R827
R828
R829
R830
R831
1-250-557-11
1-250-541-11
1-216-809-11
1-250-533-11
1-218-977-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
390K
82K
100
39K
100K
1%
1%
5%
1%
5%
1/16W
1/16W
1/10W
1/16W
1/16W
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
22K
0
22K
330
0
5%
1/16W
5%
5%
1/16W
1/16W
R832
R833
R834
* R835
R836
1-250-495-11
1-250-495-11
1-216-809-11
1-250-540-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
1K
100
75K
100
1%
1%
5%
1%
5%
1/16W
1/16W
1/10W
1/16W
1/10W
1-218-947-11
1-218-990-81
1-218-990-81
1-218-947-11
1-218-990-81
METAL CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
SHORT CHIP
330
0
0
330
0
5%
1/16W
5%
1/16W
R837
* R838
R839
* R840
R841
1-216-839-11
1-250-545-11
1-250-563-11
1-250-545-11
1-218-977-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
33K
120K
680K
120K
100K
5%
1%
1%
1%
5%
1/10W
1/16W
1/16W
1/16W
1/16W
* R738
R739
R740
R741
R742
1-250-503-11
1-218-989-11
1-218-941-81
1-218-958-11
1-218-958-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
2.2K
1M
100
2.7K
2.7K
1%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R842
R845
R846
R847
R848
1-218-990-81
1-218-990-81
1-250-495-11
1-216-864-11
1-216-801-11
SHORT CHIP
SHORT CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
0
0
1K
0
22
1%
1/16W
5%
1/10W
R743
R744
R745
R747
R748
1-218-965-11
1-218-965-11
1-218-990-81
1-218-977-11
1-218-983-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
10K
10K
0
100K
330K
5%
5%
1/16W
1/16W
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
39K
68K
0
10K
2.7K
1/16W
1/16W
1/16W
1/16W
1-218-972-11
1-218-975-11
1-218-990-81
1-250-519-11
1-208-897-81
5%
5%
5%
5%
R849
R850
R851
R852
R853
1%
0.5%
1/16W
1/16W
R749
R750
R751
R752
R753
1-218-977-11
1-218-967-11
1-216-841-11
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
15K
47K
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/10W
1/16W
1/16W
* R854
R856
R857
R858
R859
1-250-543-11
1-216-073-91
1-218-973-11
1-218-961-11
1-216-073-91
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
10K
47K
4.7K
10K
1%
5%
5%
5%
5%
1/16W
1/10W
1/16W
1/16W
1/10W
R754
R755
R756
R757
R758
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
1-218-977-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R860
R861
R862
R863
R865
1-218-973-11
1-218-969-11
1-218-977-11
1-218-990-81
1-208-948-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
47K
22K
100K
0
360K
5%
5%
5%
1/16W
1/16W
1/16W
0.5%
1/16W
R760
R761
R762
R763
R803
1-218-977-11
1-218-977-11
1-216-845-11
1-218-977-11
1-250-525-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
100K
100K
18K
5%
5%
5%
5%
1%
1/16W
1/16W
1/10W
1/16W
1/16W
R868
R869
R870
R871
R872
1-216-821-11
1-216-821-11
1-250-495-11
1-248-473-11
1-245-453-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
1K
1K
0.068
0.047
5%
5%
1%
1%
1%
1/10W
1/10W
1/16W
1/2W
1/2W
* R805
R806
* R807
R808
R809
1-250-543-11
1-218-977-11
1-250-529-11
1-250-640-11
1-250-640-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
27K
10K
10K
1%
5%
1%
1%
1%
1/16W
1/16W
1/16W
1/10W
1/10W
R878
R888
R890
R892
R894
1-216-296-11
1-216-864-11
1-216-864-11
1-216-864-11
1-218-977-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
0
0
0
0
100K
5%
1/16W
* R810
R811
R812
R813
R814
1-250-523-11
1-218-990-81
1-218-941-81
1-216-821-11
1-218-966-11
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
15K
0
100
1K
12K
1%
1/16W
5%
5%
5%
1/16W
1/10W
1/16W
R1001
R1002
R1003
R1004
R1005
1-216-296-11
1-216-296-11
1-218-977-11
1-218-941-81
1-218-941-81
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
0
100K
100
100
5%
5%
5%
1/16W
1/16W
1/16W
15
MEX-M70BT
Ver. 1.3
MAIN
Ref. No.
Part No.
Description
R1006
R1007
R1010
R1011
R1012
1-218-941-81
1-218-990-81
1-218-990-81
1-218-990-81
1-216-864-11
METAL CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
100
0
0
0
0
R1013
R1014
R1015
R1016
R1017
1-218-990-81
1-218-941-81
1-218-933-11
1-216-809-11
1-218-933-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
100
22
100
22
5%
5%
5%
5%
1/16W
1/16W
1/10W
1/16W
R1018
R1019
R1020
R1021
R1023
1-216-809-11
1-218-941-81
1-216-809-11
1-216-809-11
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
5%
5%
5%
5%
5%
1/10W
1/16W
1/10W
1/10W
1/16W
R1024
R1025
R1028
R1029
R1030
1-218-977-11
1-218-941-81
1-218-990-81
1-218-990-81
1-218-941-81
METAL CHIP
METAL CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
100K
100
0
0
100
5%
5%
1/16W
1/16W
5%
1/16W
R1031
R1032
R1033
R1035
R1036
1-218-957-11
1-218-965-11
1-218-967-11
1-218-990-81
1-218-951-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
2.2K
10K
15K
0
680
5%
5%
5%
1/16W
1/16W
1/16W
5%
1/16W
R1037
R1040
R1052
R1055
R1056
1-218-937-11
1-250-525-11
1-216-864-11
1-216-864-11
1-216-864-11
METAL CHIP
METAL CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
47
18K
0
0
0
5%
1%
1/16W
1/16W
R1090
R1117
R1145
R1173
R1300
1-218-990-81
1-218-990-81
1-216-296-11
1-216-296-11
1-218-953-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
0
0
0
0
1K
5%
1/16W
R1301
R1302
R1303
R1304
R1306
1-218-871-11
1-216-849-11
1-216-809-11
1-218-885-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
220K
100
39K
1K
0.5%
5%
5%
0.5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R1307
R1309
R1310
R1311
R1312
1-208-911-11
1-250-541-11
1-250-541-11
1-250-664-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
82K
82K
100K
1K
0.5%
1%
1%
1%
5%
1/16W
1/16W
1/16W
1/10W
1/10W
R1313
R1314
R1316
R1317
R1318
1-216-864-11
1-218-977-11
1-216-833-11
1-216-864-11
1-246-184-81
SHORT CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
0
100K
10K
0
2.43K
5%
5%
1/16W
1/10W
0.5%
1/16W
R1320
R1333
R1334
R1350
R1353
1-216-821-11
1-218-977-11
1-218-953-11
1-216-864-11
1-218-989-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
1K
100K
1K
0
1M
5%
5%
5%
1/10W
1/16W
1/16W
5%
1/16W
R1354
R1355
R1358
R1359
* R1361
1-216-296-11
1-216-864-11
1-216-864-11
1-216-864-11
1-250-513-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
0
0
0
0
5.6K
1%
1/16W
16
Remark
5%
Ref. No.
Part No.
1/16W
Description
Remark
< TUNER UNIT >
TU01
A-1946-531-A
TUX-DSP03 (TUNER UNIT)
< VIBRATOR >
X501
X502
X503
X701
X1300
1-814-485-11
1-814-767-11
1-814-777-11
1-814-778-11
1-814-367-11
QUARTZ CRYSTAL UNIT (48 MHz)
QUARTZ CRYSTAL UNITS (13.333 MHz)
QUARTZ CRYSTAL UNITS (32.768 kHz)
QUARTZ CRYSTAL UNITS (16.9344 MHz)
QUARTZ CRYSTAL UNITS (30 MHz)
MEX-M70BT
US Model
Canadian Model
SERVICE MANUAL
Ver. 1.3 2014.12
SUPPLEMENT-2
File this supplement with the service manual.
Subject: Change of MAIN board (Suffix-42)
The MAIN board has been changed in the midway of production.
Discrimination, printed wiring board, schematic diagram and electrical
parts list of the MAIN board of New type are described in this service
manual SUPPLEMENT-2.
Refer to original service manual and service manual supplement-1 for
information of Former type.
1. NEW/FORMER DISCRIMINATION
•
Distinguish by the part number of the silk print.
– MAIN Board (Component Side) –
Former : 1-889-479-31
or
1-889-479-41
New
: 1-889-479-42
9-893-929-82
•
Distinguish by the mount state of D1309 on the MAIN board.
– MAIN Board (Component Side) –
Former : D1309 no mount
New
: D1309 mount
MEX-M70BT
2. DIAGRAMS
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
For Printed Wiring Boards.
For Schematic Diagrams.
Note:
• X : Parts extracted from the component side.
• Y : Parts extracted from the conductor side.
•
f : Internal component.
•
: Pattern from the side which enables seeing.
(The other layers’ patterns are not indicated.)
Note:
• All capacitors are in μF unless otherwise noted. (p: pF) 50
WV or less are not indicated except for electrolytics and
tantalums.
• All resistors are in Ω and 1/4 W or less unless otherwise
specified.
•
f : Internal component.
• C : Panel designation.
Caution:
Pattern face side:
(Conductor Side)
Parts face side:
(Component Side)
Parts on the pattern face side seen
from the pattern face are indicated.
Parts on the parts face side seen from
the parts face are indicated.
• Indication of transistor.
C
Q
These are omitted.
B E
Note: When the complete MAIN board is replaced, it is necessary to replace knob (VOL) (SV) assy simultaneously. Also, the destination setting, Bluetooth operation
check and Bluetooth information writing is necessary.
Refer to “DESTINATION SETTING METHOD” on
page 4, “BLUETOOTH FUNCTION CHECKING
METHOD USING A CELLULAR PHONE” on page
7 and “BLUETOOTH INFORMATION WRITING
METHOD” on page 8 on original service manual.
Note:
The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part
number specified.
Note:
Les composants identifiés
par une marque 0 sont
critiques pour la sécurité.
Ne les remplacer que par
une pièce portant le numéro spécifié.
• A : B+ Line.
• Power voltages is dc 14.4V and fed with regulated dc
power supply from ACC and BATT cords.
• Voltages are dc with respect to ground under no-signal
(detuned) conditions.
no mark : TUNER (FM)
(
): CD PLAY
• Voltages are taken with VOM (Input impedance 10 M).
Voltage variations may be noted due to normal production
tolerances.
• Signal path.
F
: AUDIO
f
: TUNER
h : SIRIUS/XM
J
: CD PLAY
d
: USB
E
: AUX
a : Bluetooth
N
: MIC
Note: When the complete MAIN board is replaced, it is necessary to replace knob (VOL) (SV) assy simultaneously. Also, the destination setting, Bluetooth operation
check and Bluetooth information writing is necessary.
Refer to “DESTINATION SETTING METHOD” on
page 4, “BLUETOOTH FUNCTION CHECKING
METHOD USING A CELLULAR PHONE” on page
7 and “BLUETOOTH INFORMATION WRITING
METHOD” on page 8 on original service manual.
2
MEX-M70BT
2-1.
PRINTED WIRING BOARD - MAIN Board (Component Side) 1
2
3
4
•
: Uses unleaded solder.
5
6
7
8
9
10
11
A
MAIN BOARD (COMPONENT SIDE)
C310
D805
A
K
C811
R834
C816
5 R831 8 C825
R821
A
K
D809
C832
R836
1
5
R817
R841
3
4
R850
R814 R818
R849
R706
F
1
R593
R594
R1031
IC1003
R638
R639
R683
R613
R1032
MIC1001
C567
R602
R601
R604
R603
CL525 R665 R656
CL524
IC503
C530
C537
C533
C531
C535
L502
C014
L505
C536
R583
C570
C568
3 R571
R551
R731
R1033
C443
R420
R404
R411
R630
R528
C010
176 CL528
C521
C524
C523
4
R572
88
R567
1
2 C519
CL521 CL522
89
C517
CL509
C516
R681
R542
R541
CL510
CL508
R548
C508
R545
C09
C559
OPTICAL
PICK-UP
BLOCK
(DAX-25A)
R641
1
X503
R680
CD MECHANISM
DECK BLOCK
(MG-101CF-188)
C549
45
R579
IC501
CN701
FFC1
G
R646
R625
R633
C547
R658
X502
SERVO
BOARD
R616
R651
R592 R640
CL513
R666
SENSOR
BOARD
R627 R635
L501
C564
R703 E
C705
C1313
R619
R650
Q701
C719
R712
2
R566 CL511
R556
R519
132
C511
C507
R509
R534
R660
R535
R560
R1117
A
K
C015
R576
R540
R544
R525
27
133
CL530 R558
C503
R552
R714
44
R632
R637
FB505
C502
C1312
IC401
R510
R511
R553
R1309
R1310
D1003
R21
1
C404
C504
D502
C720
IC1051
R1052
CN1004
R538
R539
9
IC1300
FB501
C1310
K
FB02
C400
1
R634
R653
R622
R629
R643
R407
R1312
R1306
8
C747
C501
R408
C1317
R557
JL709
R516
R517
R1333
3
1
R655
R718 R721
C722 C749
C729
C846
R1307
C1304
C723
R631
R624
C1316
FB404
4
4
R416
JL721
C786
R720
5
C407
8
R502
R501
IC804
1
FB703
R719
CL702
C553
L1301
R722
5
4
6
A
R415
C755
R760
R756
C787
R662
GS S S 8
C746
C446
R412
CL529
E Q802
C814
C1318
R1311
16
C772
K
R1030
4
C1011
C1010
1
C1012
C1013
8
R1090
C1050
(CHASSIS)
A D1306
5
C1019 C1014
C1052
R1056
C748
R741
C781
R513
1
C759
R1036
C1017
R1037
C402
R743
C765
R723
C845
C441
C442
C744
R410
R745
C878
C874
C1306
CL703
C861
Q803
CAM01
C425
C528
A
R808
R809
R1355
E
R307
R318
C318
R319
C319
R320
C321
C320
R715
3 R701
C702 R702
R512
1
C750
R684
CL507
D802
E
C417
C416
C444
R409
R711
C560
C866
C1309
R1358
C711
R526
C865
L801
R1354
R708
IC702
5
4
R742
5
C716
C731
C780
4
R574
C801
DD D D
C410
C409
E R434 R438
R433
C401
C541
E
C867
C707
R707
C704
1
C782
R806
Q801
E
C335
R727
R890
C406
D401
C743
R812
R846
E R422
C1018
3
JL820
R840
JL310
K
Q405
E R421
C013
IC704
C831
JL823
R401
A
Q403
Q404
E
R435
C414 R440
C418
C419
R436
R432
Q408
Q407
Q406
C334
R892
R835
R838
C830
R322
R309
C324
R305
C316
Q807
C317
E
R317
R413
C336
C411
R417
C337
Q806
R858
C341
C408
R414
R323
R744
C848
JL308
K
R312
C571
D
L802
R306
R321
C325
C326
C323
JL307
R860
C837
C835
K
A
R861
E
C322
C712
C833
A
C840
R878
C843
D1309
C844
K D813
D811
R888
A
D814 K
R857
C841
C
A
K
R862
R308
R406
R705
FB804
C314
R304
C343
C342 FB302
C340
C339
R315 R316
C308
C305
C309
C333
C331
C311
C330
C313
C338
JL306
R439
C405
D304
C328
R423
A
C312
IC802
R848
FB803
C803
C804
FB801
FB802
C332
C307 R303
R813
5
F801
C329
C315
C807
R597
R659
1
IC801
4
D808 K
8
A
R829
B
C1016
R1019
R1001
R1023 R1025
20
R1011
R1013
11
21
10
C1332
R1004
R1005
C1329
C1322
IC1002
BT MODULE
(WB113C)
R1035
R1006
R1012
CN1002
PATTERN
ANTENNA
C1353
BT1
BT ANTENNA
L1303
L1307
CNC1
5
CL1331
R108
CAM101
C106
K
R012
CL1332
CL112
C104
C109
R1040
C1341
1
CN1300
40
R104
FB101
R1010
L1302
1
31
C1342
C1336
C1333
30
I
C1334
C1321
1
H
A
(CHASSIS)
D114
C1337
C1339
42
C1338
J
Note 1: IC804 and IC1002 on the MAIN board cannot replace
with single. When these parts are damaged, replace
the complete mounted board.
MEX-M70BT
1-889-479-
(42)
CL110
3
Note 2: The service manual of the mechanism deck, used in this model,
has been issued in a separate volume. Please refer to the service
manual of the MG-101 series for the mechanism deck information.
3
MEX-M70BT
2-2.
PRINTED WIRING BOARD - MAIN Board (Conductor Side) - •
1
2
3
4
: Uses unleaded solder.
5
6
7
8
9
10
11
12
MAIN BOARD (CONDUCTOR SIDE)
J401
J1001
REAR
A
SUB
FRONT
L
(FRONT VIEW)
CN301
AUDIO OUT
R
L
1
MIC
FU1
4
R
2
J801
(REMOTE IN)
3
5
8
6
9
7
10
R302
J001
(ANTENNA IN)
PW1
CL301
CL302
CN801
(SIRIUSXM IN)
IC301
B
24
2
25
2
14
1
13
4
8
9
10
7
1
5
2
6
3
TO
CN301
JL801
1
JL302
JL301
C302
E
C525
CL523
C526
R515
R514
C1094
24
C1326
R1318
IC1301 37
X1300
1
C1320
JL1300
C1323
C1324
FB1300
4
BLK
YEL
REM OUT MAX 0.4A
ILL
ACC
GND
BATT
C812
JL802
JL723
R810
C809
22
JL724
C717
23
R803
C805
R870
C847
A
R805
C828
R863
C839
C818
C821
A
R894
R839
C829
R816
C810
R826
R825
C819
GS S
Q805
DDD D
R853
K
C876
C306
R851
R852 R854
C817
G
S
S
S
G
R811
D801
D1300
R618
R617
C834
C838
C850
R823
R815
C852
R832
R827
C738
R830
C813
D303
K
R865 C823
C815
3
R847
A
Q810
Q811
D
D
K
C1303
C1301
C1307
K
R1303
JL719
R726
16
FRONT RCH (–)
R1300
R1334
JL715
C714
JL716
JL1030
JL805
1-889-479-
JL727
(42)
JL732
JL731
C1004
JL1012
3
JL1001
4
R1002
1
5
JL1007
R1015
R1055
R871
R1007 JL1002
C1005
R872
JL1011
CL1001
JL1003
IC1302
5
C1330 C1325
C827
A C806
D806
A
C872
R833
IC803
C822
FB805
C761
C760
C758
C768 R740
C764
R606
IC10013
JL1008
R1029
C1314
R1350
C1009
R1028
48
R1316
I
R1320
R1317
C1331
R547
R546
C1344
12
L1304
36
C1006
C1008
C1315
R1353
25
A
JL1020
C1328
13
L1305
15
RED
FRONT LCH (–)
JL702
K
D501
JL1019
FB1301
R1313
C1327
H
14
ORG/WHT
FRONT RCH (+)
JL701
IC1009
R1361
13
BLU/WHT
FRONT LCH (+)
JL733
CL1000
5
12
GRY/BLK
JL729
R1017
8
R591
C512
R520
R522
R521
R1014
1
4
JL538 JL730
JL710
JL1010
R561
11
WHT/BLK
REAR RCH (–)
42
JL708
R1003
R505
R503
R504
R559
10
GRY
REAR LCH (–)
JL711
JL707 JL706
R554
R563
C505
R527
9
WHT
REAR RCH (+)
C509
R524
R506
R578
R549
CL504
CL501
CL502
R529
G
JL705
JL539
CL519
JL714
JL704
R585
JL717
C510
C506
CL503
R728
JL703
C529
R573
CL518
CL517
R608
C515
C518
C735
26
R657 R609
C543
R599
JL540
R582
5
R555
R507
JL1018
C522 C527
C520
R565
R586
R562
4
C569
X501
R598
R605
1
CL520
IC504 3
C532
C539
R600
C538
C566
L504
C534
CL535
R568
R623
CL537
R523
JL526
JL528
CL505
IC502
4
CL536
R626
R642
R649
5
R652
R621
8
R628
JL1016
1
C548
C544
C540
JL530
8
VIO/BLK
REAR LCH (+)
K
R837
R1359
JL722
R750
JL718
1
25
R748
JL726
R709
C734
C783
C745
C718
C793
C721
C766
C770
C762
JL712
C771
R590
JL720
JL713
C736
JL725
C767 FB702
R607
C546
JL806
1
6
R717
R751 100
K
JL804
C851
5 JL808
C715
C728
CL701
C732
C727
IC705
R550
R682
R615
C550
4
JL807
D816
IC805
IC703
R301
R869
R842
R845
1
4
C730
R734
C725
R654
R587 R644
R1024
R611
C551
JL529
R612
R533
CL512
CL539
R610
3
R753
R752
JL1014
JL527
50
C790
C788
R733
R648
JL524
FB504
JL525
R614
JL1102
CL02
R704
51
R757
R749
JL534
JL522
JL523
8
C545
CL01
C754
75
JL803
C742
R758 76
D818
R819
JL533
R647
L01
C756
E
K
R1304
C1308
R1301
JL402
JL532
JL531
R10
R11 R02
R725
R737
E
C737
R724
R762 R754
L401
C05
C763
R738
R739
C775
C773
R747
R763
JL01
R09
C777
A
R868
R822
JL403
C779
7
GRN/BLK
L301
44
R856
R807
C769
R105
C03
E
R735
C751
Q814
C706
C107
C105
C103
R103
TU01
TUX-DSP03
(TUNER UNIT)
R732
X701
C420
C421
C422
R107
C1358
D817
K
E Q812 Q813 A
C741 C740
C739
20
R437
1
R859
1
R431
R424
1
R310
C415
R761 R755
C423
C424
D1002
C1054
21
IC402
D
A
C412 C413
C445
40
6
VIO
D301
R311
R729
R430
R425
R426
R427
R428
R429
JL1021
K
5
GRN
JL305 JL304
A
JL309
D1001
A
K
4
C303
D812
C820
E
A
FB1005
R828
FB1004
Q402
FB1003
K
C
F
JL311 JL303
C304
C301
R1302
Q401
E
2
3
15
16
JL401
Q808
1
JL1017
JL1004
JL1005
R1314
1
JL1006
R1021
JL1015
JL1013
R1016
R1020
R1018
JL1009
R1145
JL108
JL105
JL107
JL106
JL104
JL111
JL109
JL110
JL113
JL114
JL101
2
JL112
JL118
JL115
JL102
R1173
JL119
R102
JL103
JL116
C102
20
JL117
1
J
19
CN101
KEY
BOARD
MEX-M70BT
Note 1: When IC502 on the MAIN board is replaced, the destination
setting is necessary. Refer to “DESTINATION SETTING
METHOD” on page 4 on original service manual.
Refer to page
27 on original
service manual
4
4
Note 2: IC1009 on the MAIN board cannot replace
with single. When this part is damaged, replace
the complete mounted board.
MEX-M70BT
SCHEMATIC DIAGRAM - MAIN Board (1/4) 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
MAIN BOARD (1/4)
A
17
C745
0.1
+3.3V REGULATOR
IC702
BU33TD3WG-TR
C771
0.1
C767
0.1
C749
1
C764
0.01
JL724
C770
0.01
C766
0.0022
C793
47p
FB702
R751
47k
CL702
IC704
G
SELF
16
IN_SW
17
LOAD
18
SL
19
SP
20
BU_GND
21
D_SW
22
L_SW
23
DRV_GND
24
DRV_GND
25
DRV_6V
26
DRV_6V
27
JL730
MEC_INSW
JL731
MEC_LOAD
JL732
MEC_DSW
JL733
MEC_LIMIT
JL701
R740 100
C761 0.1
(1.5)
LPFO
(1.7)
VCOF
PVREF
RVSS3
(1)
(1.7)
VCOI
(3.3)
RVDD3
PIO17
CD_XCCE 82
45
SDOUT_CH0
LRCK_OUT
CD_BUCK 81
46
PIO16
BCK_OUT
CD_BUS3 80
PIO20
CD_BUS2 79
VDD3-2 83
47
CD_BUS1 78
48
49
CD_BUS0 77
MS 76
R706
0
C728
0.1
C747
0.1
C731
1
C754
0.1
R724
330
R727
0
R725
330
R729
330
R732
330
R735
330
CD_ZDET
(3.4)
DEC_XMUTE
(0.4)
R733 0
LRCK_IN
(0)
R734 0
BSIF_BCK
(0)
BSIF_DO
(0)
BSIF_GATE
(0)
BSIF_ST_REQ
(0)
DEC_INT
(1.5)
R749
100k
(3.3)
(3.3)
C790
0.1
DSP_RST
(3.1)
R756 100
(3.3)
R757 100
(0.1)
R754 100
CD_SDI
(0.3)
R755 100
CD_SDO
CD_XCCE
CD_BUSCLK
(3.3)
R758
100k
(0)
R760
100k
R747
100k
R761
100k
R763
100k
C772
2.2
C780
0.0022
R744
10k
C763
12p
C781
0.0022
FB703
C750
4.7
50V
C712
0.1
R743
10k
X701
16.9344MHz
SERVO_ON
C756
12p
C748
4.7
50V
C730
0.1
C779
2.2
C765
2.2
C759
0.1
C746
4.7
50V
C787
0.1
C777
2.2
R738
2.2k
C744
4.7
50V
C786
1
C775
2.2
R739
1M
C741
0.0033
(Page 8)
(0.1)
R762
100k
C782
0.1
R737
0
C740
0.0033
R702
0
SP_DATA
C788
0.1
C739
0.0033
AU_GND
SP_CLK
R753 100
C742
0.1
C743
22
6.3V
C725
0.001
R752 100
(2.9)
R745
0
C705
0.1
R701
0
(3.4)
CL703
C755
0.001
C723
0.01
JL702
(Page 6)
BUS1
(1.7)
LRCK_IN_R
R707
0
(1.7)
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
C716
2.2
R731
0
A_GND
BUS2
(1.7)
BCK_IN_R
44
D_GND
3
RFI
43
VSS-3 84
50
R715
0
DR_GND
MAIN
BOARD
(4/4)
SLCO
SDIN_R
C738
0.0033
J
RFRPI
PIO11
JL716
I
2
RFEQO
DCOFC
RFO
AGCI
RVSS3
FNI2
FNI1
FPI2
FPI1
VDD1-1
/RST 85
41
42
C737
0.0033
MAIN
BOARD
(2/4)
(1.7)
(1.7)
(1.7)
(1.7)
(1.5)
(1.9)
(1.9)
(1.9)
(1.9)
(1.5)
(1.9)
(1.9)
VDD1-4 86
C729
1
JL715
TPI
PIO10
(1.6)
ADVSS3
DRV_ON
MEC_SELFSW
(1.7)
DEC_INT 87
40
JL713
JL729
(0.2)
BSIF_INT 88
IC705
TC94A99FG-003 (SYCH
ADIN2 (IN_R-CH)
C727
0.1
JL712
RF AMP, DIGITAL SERVO PROCESSOR, AUDIO DSP
VDD3-1
ADVREFH
(1.7)
R723
100
VDD1-2
39
BSIF_GATE 89
ADVCM
14
15
OPTICAL
PICK-UP
BLOCK
(DAX-25A)
H
13
TRACK
(1.7)
DEC_BCK_IN
MEC_EJECT
38
BSIF_DATA 90
IC705
(1.7)
(1.6)
FOCUS
DRV_ON
JL727
/SRAMSTB
(2.7)
12
DEC_LRCK_IN
JL711
VDDM1
37
ADVREFL
EJECT
JL710
R722
100
36
ADIN1 (IN_L-CH)
11
R703
0
BCK_IN_F 91
(1.7)
10
JL714
LRCK_IN_F 92
DMO
(0.7)
LD
DRV_VREF
JL709
FMO
(1.6)
FFC1
SERVO
BOARD
(0.9)
34
35
ADVDD3
9
(1.7)
R721 100
R748
330k
ZDET 94
XVDD3
8
PD
R720 0
1
DEC_XMUTE 93
XO
OP_GND
DEC_SDIN_CH0
(1.7)
VSS-1
(3.3)
7
JL708
(0.9)
R719 100
TRO
33
(3.3)
1/2VCC
R718
100
DEC_SDOUT_F
JL707
32
XI
6
JL706
2
SP_CLK 96
(1.5)
5
DSP_SSTBY
3
SP_DATA 95
(1.5)
F
OP_VCC
C722
0.1
JL705
FOO
(1.5)
4
(3.3)
AVDD3
XVSS3
C732
0.1
JL704
30
31
(1.7)
3
E
(1.5)
4
TEST 97
VSS-2
(3.4)
TEI
VDD1-3
(1.5)
29
DVDD12
SENSOR
BOARD
C
(1.7)
(US, CND)
5
PDO 98
DVSS5
4
RFRP
DAO5 (SUB-CH)
(1.7)
RFZI
(3.3)
CD MECHANISM
DECK BLOCK
(MG-101CF-188)
2
(1.6)
6
TMAX 99
27
28
DVDD5
CL701
7
LPFN 100
(3.3)
(1.5)
(1.7)
8
FSMONIT
DAO4 (R_L-CH)
NC
5
JL721
F
A
(3.3)
9
26
DVSS34
VOUT
JL703
1
(1.7)
R717 0
CN701
27P
B
JL723
JL718
GND
STBY
C720
47
C715
2.2
C706
1
E
3
(1.7)
(2.2)
C719
0.1
R711
0
JL722
(1.7)
(3.3)
VIN
C735
0.033
DAO3 (F_L-CH)
(1.8)
(1.7)
(Page 7)
1
2
R704
0
Q701
2SA2119K
AUTOMATIC
POWER
CONTROL
DVDD34
C704
1
(3.3)
BU_3.3V
25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
(2.1)
+1.5V REGULATOR
IC703
BU15TD3WG-TR
DR_6V
MAIN
BOARD
(3/4)
(2.1)
(2.8)
4
C711
0.1
C702
0.1
1
C734
0.0056
JL719
IC703
D
R712
1
C714
0.047
(3.3)
NC
C717
0.047
TNI
STBY
C721
470p
(1.5)
VRO
GND
5
DVREF
3
C718
470p
VOUT
DAO2 (F_R-CH)
2
(3.3)
R705
0
VIN
LDO
1
R750
15k
R709
1k
IC704
BU15TD3WG-TR
(3.3)
C783
0.015
JL720
+1.5V REGULATOR
C
C762 0.0056
22k
JL726
R726
R708
0
C736
0.001
R728
22k
C758 0.1
R714
12
4
C760 0.015
NC
AVSS3
STBY
(3.3)
DVSS12
B
GND
5
(1.7)
3
VOUT
MDI
2
(3.3)
VIN
DAO1 (R_R-CH)
1
(1.7)
(6)
C707
1
18
JL725
IC702
C768
0.01
2-3.
C751
2.2
AU_RR_CH
K
4
MAIN
BOARD
(2/4)
(Page 6)
R741
2.7k
AU_FR_CH
R742
2.7k
AU_FL_CH
AU_RL_CH
C769
2.2
AU_SUB_CH
C773
2.2
AU_IN_LCH
AU_IN_RCH
Note: The service manual of the mechanism deck, used in this model, has been issued in a separate volume.
Please refer to the service manual of the MG-101 series for the mechanism deck information.
MEX-M70BT
5
5
MEX-M70BT
2-4.
SCHEMATIC DIAGRAM - MAIN Board (2/4) 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
MAIN BOARD (2/4)
A
23
J401
6P
R
FRONT
JL401
L
JL402
R416
0
R420
10k
0.7
Q401
LTC014EUBFS8TL
45
ON/OFF
7
3 V+
CLK
6
4
GND
5
C+
C–
IN_FL
C409 10 16V
R421 220
IN_FR
C406 10 16V
R413 220
C443
47p
R411
10k
R425
0
C425
2.2
R438
220
J001
0
0
8.4
8.4
8.4
8.4
8.4
8.4
4.2
4.2
4.2
4.2
4.2
4.2
4.2
8.8
4.2
31
32
33
34
35
36
37
38
39
40
XM_LCH
AU_IN_SUB
AUX_RCH
AU_IN_RL
AUX_GND
AU_IN_RR
AUX_LCH
AU_IN_FL
TU_RCH
AU_IN_FR
TU_GND
AU_OUT_FR
TU_LCH
AU_OUT_FL
NCO
AU_OUT_RR
NCO
AU_OUT_RL
BUS_RCH
AU_OUT_SR
BUS_LCH
AU_OUT_SL
14
13
11
10
0
0
R302
0
C013
0.1
0
0
C421
1
R437
1k
JL1016
R1145
0
JL1018
JL1001
17
R409
0
(ANTENNA IN)
R21
0
R1003
100k
A_GND
3
STBY
NC
3.3
R1013
0
2
0
Q408
LTC914TUBFS8TL
MUTING
MUTING
C405
47p
1
C408
47p
C411
47p
C414
47p
C418
47p
FB02
TU01
TUX-DSP03
(TUNER UNIT)
C419
47p
4.2
3
4.2
4.1
4.1
4.1
4
C03
1
C424
0.022
1
4.1
3
4.1
4
R09 1k
2.4
5
I2C1_SCL
R10 0
2.8
6
I2C1_SDA
R11
2.8
7
4.9
8
100
C423
0.022
JL1012
JL1010
JL1014
R1023 100
5
5
0
Q407
LTC914TUBFS8TL
MUTING
C09
47
C05
0.1
R1019 100
VOUT
GND
R1011 0
VIN
R1014 100
1
2
3.4
R1015 22
5
D_GND
FB404
JL1008
IC1001
+3.3V REGULATOR
IC1001
BU33TD3WG-TR
C1004
1
6
0
Q406
LTC914TUBFS8TL
MUTING
C010
1
JL1102
RF_ANT_IN
RF_GND_B
AUDIO_OUT_L
AUDIO_OUT_R
RSTN
SCL
SDA
+5V
CL01
R1055
0
R1017 22
JL1007
XM_LCH
18
XM_RCH
JL1019
7
0
Q405
LTC914TUBFS8TL
MUTING
C422
1
R1361
5.6k
19
8
0
Q404
LTC914TUBFS8TL
MUTING
2
22
20
9
0
Q403
LTC914TUBFS8TL
0
INPUT SELECTOR,
ELECTRICAL VOLUME
IC402
BD3468FV
23
12
4.1
15
4.1
16
IC402
4.1
30
NCO
FN2
FP2
17
29
4.1
18
28
XM_GND
GND
0.1
19
27
XM_RCH
AU_OUT_LCH
I2C_SDA
20
26
4.1
VCCH
HIVOLB
R1173
0
25
C420
1
24
FP1
AU_OUT_RCH
23
FIL
FN1
VCCL(8.5V)
22
NCO
21
I2C_SCL
37
R406
0
R1025
100
R1024
100k
JL01
C1006
0.1
4
11
R1028 0
8
R1029 0
C1353
0.1
C1323
4.7
R1320
1k
C1331
1
5
2
CN1004
2P
MIC1001
MIC_SIGNAL
1
MIC_GND
2
1.5
0
USB_SHIELD
1
USB_GND
2
O
D–
3
D+
4
V_BUS
5
VDD33
1
6
3.3
2
5
3.3
4
1.5
3
VCC
GND
R1090
0
D1002
DZ2J06800L
C1010
1
2.7
3
1.3
4
NOISE
REG
STBY
IN+
3.3
3.3
3.3
3.3
3.3
32
2.6
3.3
27
PPB4
VSS
PPB3
CSB3
PPB2
CSB2
PPB1
CSB1
CSB4
DP2 29
VSS 27
26
V+
OUT
IN–
7
X2
DP1 26
VDD25
DM1 25
0
6
1.3
5
1.3
R1030
100
C1332
0.1
2.6
0
0
JL119
L1305
15nH
JL102
JL101
L1304
15nH
JL115
C1333
0.1
JL114
JL113
C1017
0.001
C1334
0.1
R1036
680
RE_IN0
JL112
RE_IN1
JL111
KEY_IN1
JL110
JL109
KEY_IN0
R1031
2.2k
D1306
RB751V40,115
C1013
0.047
C1012
1
C1011
1
C1018
4.7
C1019
0.47
R1313
0
R1353
1M
X1300
30MHz
D1001
DZ2J06800L
C1315
10p
(Page 8)
JL118
0
3.3
R1033
15k
MAIN
BOARD
(4/4)
CN101
20P
VDD25
X1
BUS_B
GND
30
28
VDD33 30
7
31
L1303
15nH
29
12
R1037
47
8
33
0
DM3 31
11
3.3
2
C106
0.001
DP3 32
10
2.6
2.4
C104
0.001
DM2 28
2.6
MIC INPUT SELECTOR
USB CONTROLLER
IC1301
PPD720114GA-YEU-AT-SAK
3.3
1
C109
0.1
L1302
15nH
0
13 14 15 16 17 18 19 20 21 22 23 24
C1314
10p
MIC
CN1300
5P
AMBER
IC1003
NJM2781RB1
C1052
0.1
C1054
0.001
FB1003
J1001
GREEN
9
MIC AMP
FB1004
N
IC1003
IC1051
NLASB3157DFT2G
C1050
0.001
2.6
7
8
VSS
1.2
C1014
1
LED1
R1318 2.43k
D1003
DZ2J06800L
M
1.2
JL1021
6
IC1301
DPU
R1056
0
LED2
VDD25 33
DMU
0
5
VSSREG
VDD33
3.3
LED3
DP4 35
DM4 34
AVDD
0
R1021 100
4
VSS 36
VDD25OUT
AVSS
R1016 100
JL1017
LED4
AVDD
R1020 100
JL1011
3
AVSS(R)
R1012
0
JL1015
0.5
R108
470
D114
DZ2J06800L
SYSRSTB
1
VBUSM
VDD33REG
2.6
R1018 100
IC1051
R103
2.2k
R107
12k
48 47 46 45 44 43 42 41 40 39 38 37
R1001
0
R1052
0
C107
1
FB101
C1321
0.1
1
C1320
22
R1032
10k
C105
2.2
R105
12k
R104
470
RREF
L
C103
1
3
JL1009
JL1013
C1342
0.001
4
2
R1010
0
C1341
0.001
R1317 0
6
CN1002
K
R1040
18k
R1316 10k
7
C1324
1
3.3
GND_40
GND_1
9
TEST
IC1002
BT MODULE (WB113C)
32
WP
GPIO[3]
C1008 2.2
1.3
RESET
VREG_IN_USB
12
13
UART_TX
15
14
UART_RX
UART_RTS
16
USB_DP
17
18
GND_2
GPIO[1]
31
PATTERN
ANTENNA
GND_3
RF
30
GPIO[2]
10
40
29
JL1006
BT1
BT ANTENNA
NC
PCM_CLK
GND_38
JL1005
GND_5
GPIO[5]
GPIO[4]
39
28
SPI_PCM_SEL
PCM2_OUT
38
27
VREG_EN
GND_6
SPI_CS
26
JL1004
SPI_CLK
25
JL1003
PCM2_IN
37
R1006 100
J
USB_DN
USB/UART
24
VREG_IN_HV
PCM2_SYNC
36
CL1001
R1035 0
R1350
0
C1009 2.2
VREG_OUT_HV
SPI_MOSI
BT_DIN
23
SPI_MISO
CL1000
VREG_OUT_USB
22
35
BT_DOUT
JL1002
34
R1005 100
UART_CTS
20
R1004 100
BT_SYNC
GPIO[0]
BT_CLK
21
VDD_PADS
JL717
VDD_HOST
R1007
0
R412
0
33
R410
0
AU_GND
19
R407
0
DR_GND
(Page 5)
CNC1
(Page 5)
C400 10
39
C1016
10
I
3.4
3.4
16.4
40
38
C1005
47
2
R434
220
C404 0.1
G
MAIN
BOARD
(1/4)
C417
2.2
4
MAIN
BOARD
(1/4)
AU_FR_CH
C407
0.1
24
H
R436
47k
AU_IN_LCH
R102
0
(Page 8)
R435
47k
R432
47k
1.1
34
F
R423
47k
AU_RR_CH
33
MAIN
BOARD
(4/4)
R417
47k
AU_RL_CH
35
6
SUB
R414
47k
AU_FL_CH
36
E
L
AU_SUB_CH
3.5
41
(Page 7)
REAR
AU_IN_RCH
NCO
5
R
R415
6.8k
42
MAIN
BOARD
(3/4)
AUDIO OUT
0
0
R439
C441
47p
C442
47p
43
D
R440
16.4
C402
1
44
R422 220
R426
0
8.8
0
46
8
C410 10 16V
R427
0
13.7
47
2
VOUT
C444
47p
C445
47p
IN_RR
R428
0
9.4
FB
R431
0
C413
0.1
R433 220
R429
0
1
I2C0_SCL
C446
10
35V
C416 10 16V
R430
0
1.3
R424
0
IN_RL
JL403
0
0
I2C0_SDA
C412
10
ATT
0
13.9
C
REGULATOR
IC401
NJW4190R-A
Q808
LTA014EUBFS8TL
Q402
LTA014EUBFS8TL
R404
150k
IC401
Q401, 402, 808
MUTING CONTROL
L401
2.2uH
C415
10
B
L01
4.7uH
R02
0
C1326
0.1
C1329
0.1
FB1301
FB1300
C1327
4.7
C1322
0.1
C1328
4.7
LCD_DATA
JL107
LCD_CE
JL106
LCD_CLK
JL105
JL104
JL108
SIRCS
C1339
2.2
JL116
JL117
FB1005
JL103
NOSE_SW
C102
10
C1338
47p
1
USB_VBUS
2
USB_GND
3
D–
4
D+
5
GND
6
AUX_L
7
AUX_R
8
AUX_GND
9
RE_0
10
RE_1
11
KEY_1
12
KEY_0
13
LCD_DATA
14
LCD_CE
15
LCD_CLK
16
ILL(FP+B)
17
SIRC
18
KEY_GND
19
GND
20
PANEL_SW
KEY
BOARD
Refer to page
29 on original
service manual
C1337
0.1
L1307
C015
0.001
C1336
47p
C014
1
R012
0
CAM101
(CHASSIS)
CAM01
(CHASSIS)
MEX-M70BT
6
6
Note: IC1002 on the MAIN board cannot replace with single. When
this part is damaged, replace the complete mounted board.
MEX-M70BT
2-5.
SCHEMATIC DIAGRAM - MAIN Board (3/4) 1
2
3
4
6
5
7
8
10
9
11
12
13
14
15
16
17
18
20
19
21
22
23
MAIN BOARD (3/4)
A
CN301
16P
11
12
C
ACC
BATT
13
15
NC
10
ILL
11
NC
12
ACC
13
TELL_ATT
14
VCC
15
GND
16
14
16
GND
C305
47p
C304
47p
C302
47p
R878
0
R301
4.7k
PW_GND4(FR)
OD
25
23
7.2
FR–
22
3.7
24
VCC1
21
7.2
FR+
MUTE
PW_GND3(RR)
20
14.1
RR+
RR–
19
7.2
AC_GND(BEEP)
17
7.2
18
16
3.7
IN_FR
IN_RR
15
3.7
IN_FL
PRE_GND
14
12
3.7
13
11
3.7
3.7
RIPPLE
10
3.7
FL_N
C301
47p
IN_RL
PW_GND1(RL)
RL+
RL–
8
FL+
STBY
VCC2
FR_N
FL_N
FL_P
JL311
IN_FL
ILL
9
IN_RL
10
8
IN_FR
9
7
FL–
IC301
POWER AMP
IC301
PURE5001H-4WX
IN_RR
REM OUT MAX0.4A
FR–
AMP_REM
FL_P
9
TO
CN301
FR_P
7.2
8
6
7
7
FRONT LCH (–)
5
FL+
7.2
FRONT LCH (+)
FRONT RCH (–)
FR+
6
6
14.1
B
5
FL–
FRONT RCH (+)
RL_P
RL_N
5
4
4
3
RL–
7.2
RR–
REAR LCH (–)
RR_P
RR_N
3.4
4
2
TAB
3
1
RL+
PW_GND2(FL)
REAR RCH (–)
RR+
3
2
2
1
REAR LCH (+)
7.2
REAR RCH (+)
1
PW1
RL_N
JL303
C337
4.7
50V
RL_P
C312
0.1
JL304
RR_N
JL305
C336
4.7
50V
C335
4.7
50V
C334
4.7
50V
RR_P
FR_N
FR_P
J801
(REMOTE IN)
FU1
10A
32V
CN801
(SIRIUSXM IN)
1
D
2
4
5
3
6
8
9
R305
1k
C316
1
C317
1
R306
1k
C318
1
C319
1
R307
1k
C320
1
C321
1
R308
1k
C322
1
C323
1
R322
10k
R320
10k
R317
10k
R315
10k
JL307
JL309
7
10
JL310
L301
C340
47p
D303
GN1G
F801
2A
36V
6
4
R836
100
4.9
1
0
3.3
5
GND
R312
47k
D304
DA2J10100L
C804
0.001
VCC
5
4
GND
R841
100k
C832
0.1
C326
1
C343
47p
4.9
2
3
C825
0.1
NC
R304
0
D401
DA2J10100L
0
R849
39k
R848
22
R309
150
C303
4700
16V
C310
0.1
C306
0.1
C329
0.1
C308
47p
C331
47p
R311
0
C324
47p
C315
47p
R401
22
R323
0
7
3
R869
1k
C328
47p
2
R868
1k
C314
10
4.8
4.9
C313
47p
FB804
C325
1
IC802
74LVC1G17GW-125
C311
47p
R818
12k
C803
0.001
FB302
BUFFER
R831
100k
C309
47p
3.3
C338
47p
IC802
4.9
8
VCC
D301
DB2441600L
1
D818
DZ2J18000L
4.9
D817
DZ2J07500L
R814
12k
F
R821
1k
R817
0
D809
DZ2J18000L
R813
1k
R859
10k
BUFFER
IC801
TC7WH126FK
FB803
FB802
R856
10k
D808
DZ2J18000L
FB801
IC801
R829
100
C816
100p
R834
100
C1358
2200p
C811
100p
C332
0.1
C307
1
D805
DZ2J18000L
JL308
C342
47p
C339
47p
C807
0.001
E
C341
47p
C330
47p
R321
6.8k
C401
47
25V
C333
47p
R319
6.8k
R318
6.8k
R316
6.8k
47
46
XM_LCH
XM_RCH
45
G
R850
68k
JL301
JL302
R310
47k
CL302
CL301
43
42
D811
DZ2J18000L
C840
0.47
D812
GN1G
R303
10k
D813
DZ2J18000L
XM_PWR
9
RC_IN0
8
JL806
15
ECO
EN_SYS
6.5
16
R860
47k
C843
0.001
BATTERY CHECK
3.3
R888
0
0
0
Q806
LSCR523UBFS8TL
ACCESSORY CHECK
40
BUFFER
IC1009
39
EEPROM
IC1009
MFI337S3959
37
1
1.7
VCC
36
35
3.3
5
3.4
2
3
R862
100k
NC
1.7
4
GND
1
GND
VCC
8
2
SDA
RST
7
3
NC
SCL
6
4
NC
NC
5
34
3.3
MAIN
BOARD
(2/4)
(Page 6)
3.4
C566
0.1
R1117
0
C1094
0.1
0
33
Q807
LSCR523UBFS8TL
DIMMER DETECT
R830
39k
3.3
5
38
IC504
74LVC1G17GW-125
C844
4.7
25V
R861
22k
0.6
0
Q812
LTC044EUBFS8TL
Q814
LSCR523UBFS8TL
R842
0
14
FB805
USB_ON
D816
RSX051VA-30
C841
0.47
41
IC504
D814
DA2J10100L
R858
4.7k
6.5
Q813
LTC014EUBFS8TL
R845
0
12
USB_OVR
SYNC_OUT
11
13
I
0
Q812, 814
BACK UP
VOLTAGE DETECT
10
R827
390k
(Page 8)
7
RC_IN1
8
MAIN
BOARD
(4/4)
BU_IN
6
STB
5
I2C0_SDA
I2C0_SCL
3
4
AMP_ATT
2
R857
47k
BEEP
1
H
44
R1002
0
JL802
C814
100
16V
C813
22
C827
1
C812
1
C820
0.47
C809
0.0068
R828
82k
C839
150p
C822
10
BU_3.3V
DR_6V
R837
33k
R808
10k
R823
4.7k
R809
10k
R822
270
R871
0.068
1/2W
R872
0.047
1/2W
C806
0.1
J
R854
100k
(Page 5)
IC1300
R853
2.7k
R1333
100k
DC/DC CONVERTER
K
C810
10p
R810
15k
REGULATOR
R1354
0
0.9
1
IC803
O
C805
680p
C819
10
R835
75k
R865
360k
C848
47
R838
120k
GATE5
VIN0
43
12.1
42
14.1
R892
0
C835
470
16V
C837
470
16V
C867
470
16V
C834
10
C876
10
C838
0.1
R852
10k
R894
100k
R819
100k
C1301
10
D1309
DB2441600L
C831
470
16V
C821
10
R826
300k
C830
470p
R890
0
C1303
10
C1304
1
C861
10
R1355
0
R1358
0
6.4
R806
100k
D802
DZ2J09100L
JL803
R846
1k
14.1
3
3.3
4
5.2
5
1
6
5.2
7
1.1
8
VREF
BST
LX
RT
VIN
GNDA
EN_SYS
SS_SYS
USBOUT
EN_USB
FB_USB
VIC_USB
USBIN
ISET_USB
SYNC
FLT_USB
C1318
2.2
16
6
15
1.6
R1311 100k
13
6
C1316 0.01
12
3.3
11
0
R1307 10k
10
1
C1317 0.1
9
3.3
14
R1303
100
R1309
82k
R1310
82k
C878
2.2
C1306
47
R1300
1k
R1334
1k
C1307
22
Q801
LTC014EUBFS8TL
Q802
LTA014EUBFS8TL
Q801, 802
POWER CONTROL
R1301
10k
R1302
220k
C1310
100
16V
C845
1
C1325
1
C1312
0.01
C1313
22
R1306
1k
R1312
1k
0
6.4
6
S
6.4
Q803
NTTFS5116PLTWG
B+ SWITCH
0
8
7
6.4
6.4
6.4
R1359
0
C874
47p
C1330
47
JL807
IC804
IC1302
+6V REGULATOR
+3.3V REGULATOR
IC1302
BU33TD3WG-TR
IC804
BD60HC0WEFJ-E2
R812
100
6.4
R870
1k
2
JL1030
R863
0
JL823
R840
120k
1
5.2
R851
0
0
C829
470p
R1304
39k
10.5
44
BCAP
VINSW
41
40
14.1
14.1
14.1
NC
HSW2
39
HSW1
14.1
38
GND4
SW2
3.3
36
FB2
INV2
34
1.5
0.9
C872
470p
D806
RSX205L-30TE25
37
C828
1
R805
100k
R807
27k
C847
22
C850
10
R839
680k
C817
0.1
R833
1k
C818
10
R825
33k
L801
22uH
JL805
R803
18k
C833
0.1
C1308
680p
JL808
L802
47uH
C866
47
C823
1
C815
10
C865
47
D801
RB050L-60
C801
47
JL820
R815
0.039
1/2W
R832
1k
R811
0
R816
0.039
1/2W
35
VOUT0
VIN1
32
3.3
31
3.3
0.7
33
ADJ1
VOUT1
30
1.2
29
ADJ2
VOUT2
27
28
0.9
GND3
8.8
26
25
14.1
14.1
VIN2
SNSH
SNSL
GATE1
23
11.5
14.1
M
24
6.4
JL801
L1301
47uH
REGULATOR
IC803
BD49100RFS-E2
11.5
Q811
RSD046P05TL
N
14.1
12.1
ADJ5
EN
2
3.3
3.4
3.4
3
4
5
ECO
LD4EN
3.4
6
ERR2
ERR1
3.4
7
SDA
1.1
3.4
8
9
SYNC
SCL
0.6
10
11
12
RT
GND1
VOUT3
GND2
13
5
0.9
ADJ3
14
15
6.2
VIN3
16
6.4
0
17
18
CLCAL
VIN4
0
0
19
20
9.1
D1300
RSX205L-30TE25
6.4
TIMER
S
VOCAL
5.2
VOUT4
14.1
21
1.7
Q810
RSD046P05TL
FB1
11.5
INV1
22
S
0.9
S
14.1
L
IC1300
OZ539IGN-A1-0-TR
C1309
0.01
Q805
NVTFS5124PLTWG
Q810, 811
REGULATOR
1
MAIN
BOARD
(1/4)
5
VCC
VO
NC_7
VO_S
NC_6
GND
EN
NC_4
1
6
2
6
5.2
4
1
2
3
5.1
R1314
100k
3
VIN
VOUT
GND
STBY
NC
5
4
C846
10
3.3
JL1300
R408
0
JL804
P
IC805
Q
+1.2V REGULATOR
IC805
S-13A1A12-E6T1U3
4
3.3
R
MEX-M70BT
C851
4.7
5
6
SSC
VSS_5
VIN
ON/OFF
VSS_2
VOUT
3.3
3
2
1
R847
0
1.2
C852
4.7
7
7
Note: IC804 and IC1009 on the MAIN board cannot replace with single.
When these parts are damaged, replace the complete mounted board.
MEX-M70BT
2-6.
SCHEMATIC DIAGRAM - MAIN Board (4/4) 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
STB
BEEP
AMP_ATT
ACC_IN
BU_IN
B
SYNC_OUT
MAIN BOARD (4/4)
A
115
NC
0 116
Vss
R578 100
3.3 117
C539
0.1
M
C1344
1
C520
0.1
C526
22
C527
0.1
C569
0.1
C544
0.1
BT_CLK
BT_SYNC
DRV_ON
MEC_INSW
BT_DIN
R568 0
R657 100k
(3.3)
3.3
JL538
R605 100k
R606 100k
0
45
R590 100
0
ACC_IN
R609 100
(3.3)
DRV_ON 47
Vss 46
R608 0
3.3
PVcc 50
KEY_ACK1 49
XM_TX 48
MEC_INSW 51
0
BT_DOUT 54
BT_SYNC 53
BT_CLK 52
R599 100
0
3.3
R598 100k
R597 220k
CL513
3.3
BU_IN 56
BT_DIN 55
0
R594 0
1.2
Vcc 58
MEC_LIMIT 57
MEC_LOAD 60
KEY_ACK0 59
(3.3)
R658 100
3.3
R659 10k
R591 100k
R593 100
(0)
PVcc 62
Vss 61
DEBUG_RX 64
XM_RX 63
TBD 66
BT_RX 65
1.4
RTC_X1 67
RTC_X2 68
1.6
1.7
3.3
PLLVcc 69
1.7
Vss 72
XTAL 71
EXTAL 70
3.3
Vss 73
NMI 74
3.3
RES 76
Vss
75
CL522
CL523
3.3
NC 78
PVcc
77
3.3
CL521
1.2 (0.9)
33
1.3 (0.9)
DEC_SDIN_CH0
R629
R622 100
100
DEC_SDOUT_F
C553 10k
31
1.7
R631 10k
DEC_LRCK_IN
30
1.7
R632 10k
DEC_BCK_IN
29
0
R557 100
28
0
R624 100
27
0.4
26
3.3
25
0
33
32
30
29
BSIF_DO
28
CL512
27
CL539
R633 10k
BSIF_BCK
JL532
R646 10k
CD_SDO
7
31
26
MAIN
BOARD
(2/4)
(Page 6)
24
23
0.3
22
1.2
21
0.1
R627 100
JL531
CD_SDI
20
3.1
R634 100
JL533
CD_XCCE
18
3.3
R625 100
JL534
17
0
19
CD_BUSCLK
R635 100k
3.4
R533 0
3.3
R630 100
BSIF_ST_REQ
DSP_SSTBY
DSP_RST
0
DEC_INT
R528 0
0
BSIF_GATE
3.3
R637 100k
0.1
CD_ZDET
R683 0
0 (3.4)
DEC_XMUTE
1.2
R647 100k
3.3 (2.9)
SP_DATA
R648 100k
3.4
SP_CLK
R638 100
(3.3)
SERVO_ON
0
R592 100k
R639 100
R650 100
3
3.4
R640 100k
2
3.3
R641 100k
1
FB505
176
HIT2_RESET
ATT
FB504
R619
100
R651
100
JL530
3.4
175
174
PVcc
3.3
LCD_CLK
R662 10k
32
R615
100k
CL528
0
SF1_D1
Vss
USB_CHG_MOD1
173
172
171
0
SF1_D0
170
SF_CLK
SF1_D3
SF_CE
169
167
168
0
0
3.3
SF1_D2
166
3.3
0
165
NC
NC
164
163
Vss
USBUVss
Vss
162
161
USBUVcc
USBAVcc
USBAVss
159
C567
1
R614
100k
R612
100
R602
100
R642
100
C545
0.1
R649
100
R613
100k
R604 100
JL524
JL522
R603 100
JL525
R656 100
JL527
R601
100
R665
100
MEC_SELFSW
JL526
18
19
20
NOSE_SW
22
SIRCS
23
24
R552
470
R559
100k
D502
RB751V40,115
R558
100k
R576
100k
R565
470
R561
100
C522
8p
L504
4.7uH
R610
100
3.3
C534
22
X501
48MHz
L505
4.7uH
C535
0.1
C537
0.1
(Page 6)
1.2
34
JL523
R583
5.6k
C525
0.1
C518 7p
6
0
35
R553
100
17
MAIN
BOARD
(2/4)
CL525
C504
0.01
CL524
C530
22
CL530
C503
0.01
3.3
R544
33k
C532
0.1
158
BT_TX
RE_IN1
1.2
RE_IN0
USBAPVcc
NC
133
L
CL537
36
SERVO_ON 4
157
132
R540
33k
R623 1k
MEC_EJECT
CL529
37
BT_MIC_DET
NC
3.3
R511
1k
LCD_CE
R643
100k
38
SP_CLK 5
USBAPVss
0 131
CL536
AMP_ATT
REFRIN
0 130
RE_IN1
R628 1k
I2C1_SDA
156
3.3 129
0
SP_DATA 6
155
R539 2.2k
LCD_DATA
39
AMPSTB
154
R510
1k
3.3 128
CL535
I2C1_SCL
3.3
RE_IN0
R538 2.2k
R621 1k
3.3
Vcc 7
I2C0_SDA
1.3
2.8 127
3.4 125
R535 2.2k
R504 100
USBDVss
2.8 126
R506 100
USBDVcc
R505 100
CL504
R587 100
0
40
DEC_XMUTE 8
I2C0_SCL
153
CL503
I2C1_SDA
(0)
41
Vss 9
VBUSIN0
CL502
I2C1_SCL
42
CD_ZDET 10
MEC_DSW
152
I2C0_SDA
R534 2.2k
R503 100
PVcc
1.2
I2C0_SCL
1.1
PVcc 11
RE_ON
LRCK_IN
2.8
BSIF_GATE 12
Vss
4.5
3.4 124
RC_IN1
C549
0.1
FB501
43
DSP_RST 14
DEC_INT
13
Vcc
DP0
K
(0) 123
R655
0
44
DSP_SSTBY 15
USB_ON
DM0
3.3 122
JL528
CL501
Vss
CD_BUSCLK
USBDPVss
3.3 121
C507
0.1
C551
0.1
0.3
BSIF_ST_REQ 16
NC
151
R600
100
CD_SDO
CD_XCCE
150
120
Vcc
NC
BT_RST
3.3 119
Vss
CD_SDI
IC503
R7S7200022CFP
BT_PWR
R660 100
R560 100k
BSIF_BCK
SYSTEM CONTROLLER
USB_OVR2
114
1.2 118
R556
100
RC_IN1
USB_ON2
149
J
IC503
PVcc
0
USB_ON
PVcc
0
CL505
C511
0.1
BSIF_LR
USB_OVR
USBDPVcc
3.3 113
Vss
USBDVss
112
R517
100
BSIF_DO
148
3.4 111
R516 100
PWR_ECO
147
3.3 110
R529 100k
I
BEEP
Vcc
3.3
3.3 109
R514 100
DEC_BCK_IN
EN_SYS
USBDVcc
R515
100
DEC_LRCK_IN
146
3.3 108
Vss
145
3.4 107
R523 100k
D501
RB751V40,115
CL510
103
ILL_IN
3.4 105
0
3.3
DEC_SDOUT_F
Vss
106
R524
100
USB_OVR
R550
KEY_IN0 82
RC_IN0
81
NC
80
NC 79
DEC_SDIN_CH0
TCK
102
1.2
R682 100k
KEY_IN1 83
TMS
101
1.2 104
ECO
3.3
100
NC
3.3
Vcc
NC
R522 100
LCD_CLK
TDI
144
R521 100k
EN_SYS
99
Vss
TDO
143
3.3
TRST
98
NC
0
97
NC
USBDPVss
R548 10k
R549 100k
XM_PWR
142
3.3
Vcc
96
USBDPVcc
H
R520
100
R547 10k
LCD_CE
95
USB_X2
R501
100
0
3.3
PVcc
141
SYNC_OUT
R542 100
SYNC_ON
140
R546 10k
LCD_DO
139
R502
100
SYNC_OUT
3.3
16
I2C0_SCL
LRCK_INT
MEC_EJECT
1.7
R509
100
0
C550
0.1
C548
0.1
R644
100
Vss
USB_X1
15
3.3
C546
0.1
R526
100
NC
Vss
R545 10k
94
R654
0
R653
2.2k
AUDIO_X1
138
R525 100
R512
100
93
1.7
I2C0_SDA
3.3
CL511
3.3
1.2
13
14
92
MEC_SELFSW
0
137
CL508
R527
C543
0.1
C547
0.1
DEBUG_TX
SIRCS
11
PVcc
91
R507
0
10
12
BSCANP
90
DOOR_SW
G (Page 7)
C510
0.1
89
136
9
8
1.7
135
7
3.3
CL507
3.3
DEC_BCK_IN
6
8
0
(3.3)
5
CL509
USB_CHG_MOD2
R541
100k
ACC_IN
134
4
MAIN
BOARD
(3/4)
AVref 88
Vss
87
AVcc
86
NC
85
NC
84
XM_PWR
3
0
F
3.3
C506
0.1
2
MEC_LIMIT
MEC_LOAD
R519
100
R555
100
C505
0.1
1
C541 1
C531
15p
JL539
JL540
R582 100k
3.3
C515
0.1
160
C512
0.1
R586 100k
E
C508
0.001
0
KEY_IN1
R585 100k
R554
100
CL520
KEY_IN0
CL517
RC_IN0
R617
100k
C540
0.1
C523
0.1
C517
0.1
R551
100
C509
0.1
R607
100
R618
100
CL518
C516
1
C538
0.1
CL519
C560
47
C521
0.1
R579
270k
R681
100k
3.3
R684
0
R562
10k
C559
0.0033
R571
0
3.3
R563
10k
C519
0.1
R567
0
0
R566
10k
C501
100
10V
C528
10p
1.6
C529 0.1
C564
220
6.3V
3.3
R666 0
CT 3
X502
13.333MHz
VOUT 4
2 VDD
C533
15p
C570 2.2
C502
100
10V
D
1 GND
R573 100k
3.3
R513
100
R574
0
R572 100k
C
C571
0.1
C524
10p
X503
32.768kHz
IC501
RESET SIGNAL GENERATOR
IC501
BU4228F-STR
BT_DOUT
MEC_DSW
R680
100
C536
22
R616
0
R626
100k
C568 0.001
3.3
0
L501 15nH
3.3
L502 15nH
N
R652
100
CS
1
HOLD
DO
2
CLK
WP
3
GND
4
8
VCC
7
6
5
DI
0
0
JL529
BUS1
BUS2
IC502
ATT
R611
100
0
SERIAL FLASH
3
MAIN
BOARD
(1/4)
(Page 5)
IC502
MX25L3235EM2I-10G
MEX-M70BT
Note: When IC502 on the MAIN board is replaced, the destination setting is necessary. Refer
to “DESTINATION SETTING METHOD” on page 4 on original service manual.
8
8
MEX-M70BT
MAIN
3. ELECTRICAL PARTS LIST
Note:
• Due to standardization, replacements in
the parts list may be different from the
parts specified in the diagrams or the components used on the set.
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
• Items marked “*” are not stocked since
they are seldom required for routine service. Some delay should be anticipated
when ordering these items.
• RESISTORS
All resistors are in ohms.
METAL: Metal-film resistor.
METAL OXIDE: Metal oxide-film resistor.
F: nonflammable
Ref. No.
• CAPACITORS
uF: μF
• COILS
uH: μH
• SEMICONDUCTORS
In each case, u: μ, for example:
uA. . : μA. . , uPA. . , μPA. . ,
uPB. . : μPB. . , uPC. . , μPC. . ,
uPD. . : μPD. .
Part No.
Description
Remark
A-2033-096-B
MAIN BOARD, COMPLETE (See Note)
********************
7-685-134-19
7-685-794-01
SCREW +P 2.6X8 TYPE2 NON-SLIT
SCREW +PTT 2.6X10 (S)
< CAPACITOR/RESISTOR >
Ref. No.
When indicating parts by reference number, please include the board name.
Part No.
Description
Remark
C326
1-114-813-11
CERAMIC CHIP 1uF
10%
16V
C328
C329
C330
C331
C332
1-164-866-11
1-118-347-11
1-164-866-11
1-164-866-11
1-118-361-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47PF
0.1uF
47PF
47PF
0.1uF
5%
10%
5%
5%
10%
50V
25V
50V
50V
50V
* C03
C05
C09
C010
C013
1-116-738-11
1-118-386-11
1-116-707-11
1-114-813-11
1-118-361-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.1uF
47uF
1uF
0.1uF
10%
10%
20%
10%
10%
6.3V
16V
10V
16V
50V
C333
C334
C335
C336
C337
1-164-866-11
1-128-996-11
1-128-996-11
1-128-996-11
1-128-996-11
CERAMIC CHIP
ELECT CHIP
ELECT CHIP
ELECT CHIP
ELECT CHIP
47PF
4.7uF
4.7uF
4.7uF
4.7uF
5%
20%
20%
20%
20%
50V
50V
50V
50V
50V
C014
C015
C102
* C103
C104
1-114-813-11
1-115-416-11
1-116-716-11
1-116-738-11
1-118-290-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.001uF
10uF
1uF
0.001uF
10%
5%
10%
10%
10%
16V
25V
16V
6.3V
50V
C338
C339
C340
C341
C342
1-162-923-11
1-162-923-11
1-162-923-11
1-162-923-11
1-162-923-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47PF
47PF
47PF
47PF
47PF
5%
5%
5%
5%
5%
50V
50V
50V
50V
50V
C105
C106
* C107
C109
C301
1-118-477-11
1-118-290-11
1-116-738-11
1-118-347-11
1-164-866-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
2.2uF
0.001uF
1uF
0.1uF
47PF
10%
10%
10%
10%
5%
6.3V
50V
6.3V
25V
50V
C343
C400
C401
C402
C404
1-162-923-11
1-118-047-11
1-128-992-21
1-114-813-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
47PF
10uF
47uF
1uF
0.1uF
5%
10%
20%
10%
10%
50V
16V
25V
16V
16V
C302
C303
C304
C305
C306
1-164-866-11
1-112-839-11
1-164-866-11
1-164-866-11
1-118-361-11
CERAMIC CHIP
ELECT
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47PF
4700uF
47PF
47PF
0.1uF
5%
20%
5%
5%
10%
50V
16V
50V
50V
50V
C405
C406
* C407
C408
C409
1-162-923-11
1-124-779-00
1-118-035-11
1-162-923-11
1-124-779-00
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
47PF
10uF
0.1uF
47PF
10uF
5%
20%
10%
5%
20%
50V
16V
25V
50V
16V
C307
C308
C309
C310
C311
1-114-813-11
1-164-866-11
1-164-866-11
1-118-347-11
1-164-866-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
47PF
47PF
0.1uF
47PF
10%
5%
5%
10%
5%
16V
50V
50V
25V
50V
C410
C411
C412
C413
C414
1-124-779-00
1-162-923-11
1-100-966-91
1-118-386-11
1-162-923-11
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10uF
47PF
10uF
0.1uF
47PF
20%
5%
20%
10%
5%
16V
50V
10V
16V
50V
C312
C313
C314
C315
C316
1-118-347-11
1-164-866-11
1-118-930-11
1-164-866-11
1-114-813-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
47PF
10uF
47PF
1uF
10%
5%
10%
5%
10%
25V
50V
10V
50V
16V
C415
C416
C417
C418
C419
1-116-865-11
1-124-779-00
1-116-728-11
1-162-923-11
1-162-923-11
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10uF
10uF
2.2uF
47PF
47PF
10%
20%
10%
5%
5%
25V
16V
10V
50V
50V
C317
C318
C319
C320
C321
1-114-813-11
1-114-813-11
1-114-813-11
1-114-813-11
1-114-813-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
1uF
1uF
1uF
1uF
10%
10%
10%
10%
10%
16V
16V
16V
16V
16V
* C420
* C421
* C422
C423
C424
1-116-738-11
1-116-738-11
1-116-738-11
1-118-389-11
1-118-389-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
1uF
1uF
0.022uF
0.022uF
10%
10%
10%
10%
10%
6.3V
6.3V
6.3V
25V
25V
C322
C323
C324
C325
1-114-813-11
1-114-813-11
1-164-866-11
1-114-813-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
1uF
47PF
1uF
10%
10%
5%
10%
16V
16V
50V
16V
C425
C441
C442
C443
1-116-728-11
1-164-866-11
1-164-866-11
1-164-866-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
2.2uF
47PF
47PF
47PF
10%
5%
5%
5%
10V
50V
50V
50V
Note: When the complete MAIN board is replaced, it is necessary to replace knob (VOL) (SV) assy simultaneously. Also, the
destination setting, Bluetooth operation check and Bluetooth information writing is necessary. Refer to “DESTINATION
SETTING METHOD” on page 4, “BLUETOOTH FUNCTION CHECKING METHOD USING A CELLULAR PHONE”
on page 7 and “BLUETOOTH INFORMATION WRITING METHOD” on page 8 on original service manual.
9
MEX-M70BT
MAIN
Ref. No.
Part No.
Description
Part No.
Description
C444
1-164-866-11
CERAMIC CHIP 47PF
5%
50V
C571
1-118-361-11
CERAMIC CHIP 0.1uF
10%
50V
C445
C446
C501
C502
C503
1-164-866-11
1-114-599-21
1-165-492-21
1-165-492-21
1-118-345-11
CERAMIC CHIP
ELECT CHIP
ELECT CHIP
ELECT CHIP
CERAMIC CHIP
47PF
10uF
100uF
100uF
0.01uF
5%
20%
20%
20%
10%
50V
35V
10V
10V
25V
C702
* C704
C705
* C706
* C707
1-118-386-11
1-116-738-11
1-118-386-11
1-116-738-11
1-116-738-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
1uF
0.1uF
1uF
1uF
10%
10%
10%
10%
10%
16V
6.3V
16V
6.3V
6.3V
C504
C505
C506
C507
C508
1-118-459-11
1-118-386-11
1-118-386-11
1-118-386-11
1-118-290-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
0.1uF
0.1uF
0.1uF
0.001uF
10%
10%
10%
10%
10%
25V
16V
16V
16V
50V
C711
C712
C714
C715
C716
1-118-386-11
1-118-386-11
1-118-388-11
1-118-477-11
1-118-477-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.047uF
2.2uF
2.2uF
10%
10%
10%
10%
10%
16V
16V
25V
6.3V
6.3V
C509
C510
C511
C512
C515
1-118-386-11
1-118-386-11
1-118-386-11
1-118-386-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
16V
16V
16V
16V
16V
C717
* C718
C719
C720
* C721
1-118-388-11
1-118-407-11
1-118-386-11
1-116-707-11
1-118-407-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.047uF
470PF
0.1uF
47uF
470PF
10%
10%
10%
20%
10%
25V
50V
16V
10V
50V
C516
C517
C518
C519
C520
1-165-908-11
1-118-386-11
1-164-847-11
1-118-386-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.1uF
7PF
0.1uF
0.1uF
10%
10%
0.5PF
10%
10%
10V
16V
50V
16V
16V
C722
C723
C725
C727
C728
1-118-386-11
1-118-459-11
1-118-403-11
1-118-386-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.01uF
0.001uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
16V
25V
50V
16V
16V
C521
C522
C523
C524
C525
1-118-386-11
1-164-848-11
1-118-386-11
1-164-850-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
8PF
0.1uF
10PF
0.1uF
10%
0.5PF
10%
0.5PF
10%
16V
50V
16V
50V
16V
C729
C730
C731
C732
C734
1-165-908-11
1-118-386-11
1-116-733-11
1-118-386-11
1-118-394-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.1uF
1uF
0.1uF
0.0056uF
10%
10%
10%
10%
10%
10V
16V
25V
16V
50V
C526
C527
C528
C529
C530
1-116-711-11
1-118-386-11
1-164-850-11
1-118-386-11
1-116-711-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
22uF
0.1uF
10PF
0.1uF
22uF
20%
10%
0.5PF
10%
20%
16V
16V
50V
16V
16V
C735
C736
C737
C738
C739
1-127-772-81
1-115-416-11
1-118-397-11
1-118-397-11
1-118-397-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.033uF
0.001uF
0.0033uF
0.0033uF
0.0033uF
10%
5%
10%
10%
10%
10V
25V
50V
50V
50V
C531
C532
C533
C534
C535
1-164-854-11
1-118-386-11
1-164-854-11
1-116-711-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
15PF
0.1uF
15PF
22uF
0.1uF
5%
10%
5%
20%
10%
50V
16V
50V
16V
16V
C740
C741
C742
C743
C744
1-118-397-11
1-118-397-11
1-118-386-11
1-124-778-00
1-128-996-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
ELECT CHIP
0.0033uF
0.0033uF
0.1uF
22uF
4.7uF
10%
10%
10%
20%
20%
50V
50V
16V
6.3V
50V
C536
C537
C538
C539
C540
1-116-711-11
1-118-386-11
1-118-386-11
1-118-386-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
22uF
0.1uF
0.1uF
0.1uF
0.1uF
20%
10%
10%
10%
10%
16V
16V
16V
16V
16V
C745
C746
C747
C748
C749
1-118-386-11
1-128-996-11
1-118-386-11
1-128-996-11
1-165-908-11
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
0.1uF
4.7uF
0.1uF
4.7uF
1uF
10%
20%
10%
20%
10%
16V
50V
16V
50V
10V
C541
C543
C544
C545
C546
1-116-737-11
1-118-386-11
1-118-386-11
1-118-386-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.1uF
0.1uF
0.1uF
0.1uF
20%
10%
10%
10%
10%
10V
16V
16V
16V
16V
C750
C751
C754
C755
C756
1-128-996-11
1-116-728-11
1-118-386-11
1-118-403-11
1-164-852-11
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
4.7uF
2.2uF
0.1uF
0.001uF
12PF
20%
10%
10%
10%
5%
50V
10V
16V
50V
50V
C547
C548
C549
C550
C551
1-118-386-11
1-118-386-11
1-118-386-11
1-118-386-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
10%
10%
10%
10%
10%
16V
16V
16V
16V
16V
C758
C759
C760
C761
C762
1-118-386-11
1-118-386-11
1-127-988-81
1-118-386-11
1-100-579-81
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
0.015uF
0.1uF
0.0056uF
10%
10%
10%
10%
10%
16V
16V
16V
16V
25V
C553
C559
C560
C564
C566
1-216-833-11
1-164-940-11
1-116-707-11
1-100-354-21
1-118-386-11
METAL CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
10K
0.0033uF
47uF
220uF
0.1uF
5%
10%
20%
20%
10%
1/10W
16V
10V
6.3V
16V
C763
C764
C765
C766
C767
1-164-852-11
1-118-345-11
1-118-477-11
1-118-399-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
12PF
0.01uF
2.2uF
0.0022uF
0.1uF
5%
10%
10%
10%
10%
50V
25V
6.3V
50V
16V
* C567
C568
C569
C570
1-116-738-11
1-115-416-11
1-118-361-11
1-118-477-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.001uF
0.1uF
2.2uF
10%
5%
10%
10%
6.3V
25V
50V
6.3V
C768
C769
C770
C771
1-118-459-11
1-116-728-11
1-118-459-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
2.2uF
0.01uF
0.1uF
10%
10%
10%
10%
25V
10V
25V
16V
10
Remark
Ref. No.
Remark
MEX-M70BT
MAIN
Ref. No.
Part No.
Description
Part No.
Description
C772
1-118-477-11
CERAMIC CHIP 2.2uF
10%
6.3V
Remark
Ref. No.
C865
1-118-929-11
CERAMIC CHIP 47uF
10%
16V
Remark
C773
C775
C777
C779
C780
1-116-728-11
1-116-728-11
1-116-728-11
1-116-728-11
1-118-399-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
2.2uF
2.2uF
2.2uF
2.2uF
0.0022uF
10%
10%
10%
10%
10%
10V
10V
10V
10V
50V
C866
C867
* C872
C874
C876
1-118-929-11
1-100-769-21
1-118-407-11
1-162-923-11
1-118-359-11
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
47uF
470uF
470PF
47PF
10uF
10%
20%
10%
5%
10%
16V
16V
50V
50V
16V
C781
C782
C783
C786
C787
1-118-399-11
1-118-386-11
1-127-988-81
1-165-908-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.0022uF
0.1uF
0.015uF
1uF
0.1uF
10%
10%
10%
10%
10%
50V
16V
16V
10V
16V
C878
C1004
C1005
C1006
C1008
1-116-728-11
1-116-737-11
1-116-707-11
1-118-386-11
1-118-040-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
2.2uF
1uF
47uF
0.1uF
2.2uF
10%
20%
20%
10%
10%
10V
10V
10V
16V
16V
C788
C790
C793
C801
C803
1-118-386-11
1-118-386-11
1-164-866-11
1-118-929-11
1-118-290-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
47PF
47uF
0.001uF
10%
10%
5%
10%
10%
16V
16V
50V
16V
50V
C1009
* C1010
* C1011
* C1012
C1013
1-118-040-11
1-116-738-11
1-116-738-11
1-116-738-11
1-118-388-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
2.2uF
1uF
1uF
1uF
0.047uF
10%
10%
10%
10%
10%
16V
6.3V
6.3V
6.3V
25V
C804
C805
C806
C807
C809
1-118-290-11
1-118-405-11
1-118-386-11
1-118-403-11
1-118-393-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
680PF
0.1uF
0.001uF
0.0068uF
10%
10%
10%
10%
10%
50V
50V
16V
50V
50V
* C1014
C1016
C1017
C1018
C1019
1-116-738-11
1-116-716-11
1-118-403-11
1-116-724-11
1-116-741-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
10uF
0.001uF
4.7uF
0.47uF
10%
10%
10%
20%
20%
6.3V
16V
50V
6.3V
10V
C810
C811
C812
C813
C814
1-164-850-11
1-164-874-11
1-114-813-11
1-116-712-11
1-135-366-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
10PF
100PF
1uF
22uF
100uF
0.5PF
5%
10%
10%
20%
50V
50V
16V
10V
16V
C1050
C1052
C1054
C1094
C1301
1-118-290-11
1-118-386-11
1-118-290-11
1-118-386-11
1-118-932-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.001uF
0.1uF
0.001uF
0.1uF
10uF
10%
10%
10%
10%
10%
50V
16V
50V
16V
16V
C815
C816
C817
C818
C819
1-118-359-11
1-164-874-11
1-118-386-11
1-118-359-11
1-118-359-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10uF
100PF
0.1uF
10uF
10uF
10%
5%
10%
10%
10%
16V
50V
16V
16V
16V
C1303
C1304
C1306
C1307
C1308
1-118-932-11
1-116-733-11
1-118-929-11
1-118-931-11
1-162-963-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10uF
1uF
47uF
22uF
680PF
10%
10%
10%
10%
10%
16V
25V
16V
10V
50V
C820
C821
C822
* C823
C825
1-116-740-11
1-116-716-11
1-116-716-11
1-116-738-11
1-118-386-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.47uF
10uF
10uF
1uF
0.1uF
10%
10%
10%
10%
10%
16V
16V
16V
6.3V
16V
C1309
C1310
C1312
C1313
C1314
1-118-391-11
1-135-366-11
1-118-459-11
1-100-055-21
1-162-915-11
CERAMIC CHIP
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.01uF
100uF
0.01uF
22uF
10PF
10%
20%
10%
20%
0.5PF
50V
16V
25V
16V
50V
C827
C828
* C829
* C830
C831
1-114-813-11
1-114-813-11
1-118-407-11
1-118-407-11
1-100-769-21
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
1uF
1uF
470PF
470PF
470uF
10%
10%
10%
10%
20%
16V
16V
50V
50V
16V
C1315
C1316
C1317
C1318
C1320
1-162-915-11
1-118-391-11
1-118-386-11
1-118-278-91
1-100-159-91
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10PF
0.01uF
0.1uF
2.2uF
22uF
0.5PF
10%
10%
10%
10%
50V
50V
16V
10V
6.3V
C832
C833
C834
C835
C837
1-118-386-11
1-118-386-11
1-118-359-11
1-100-769-21
1-100-769-21
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
ELECT CHIP
ELECT CHIP
0.1uF
0.1uF
10uF
470uF
470uF
10%
10%
10%
20%
20%
16V
16V
16V
16V
16V
C1321
C1322
C1323
C1324
* C1325
1-118-386-11
1-118-386-11
1-118-480-11
1-116-737-11
1-116-738-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
0.1uF
4.7uF
1uF
1uF
10%
10%
10%
20%
10%
16V
16V
6.3V
10V
6.3V
C838
C839
C840
C841
C843
1-118-386-11
1-164-878-11
1-116-739-11
1-116-739-11
1-118-403-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
150PF
0.47uF
0.47uF
0.001uF
10%
5%
10%
10%
10%
16V
50V
50V
50V
50V
C1326
C1327
C1328
C1329
C1330
1-118-386-11
1-118-480-11
1-118-480-11
1-118-386-11
1-116-707-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
4.7uF
4.7uF
0.1uF
47uF
10%
10%
10%
10%
20%
16V
6.3V
6.3V
16V
10V
C844
C845
C846
C847
C848
1-100-764-21
1-114-813-11
1-116-716-11
1-118-955-11
1-118-929-11
ELECT CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
4.7uF
1uF
10uF
22uF
47uF
20%
10%
10%
20%
10%
25V
16V
16V
16V
16V
C1331
C1332
C1333
C1334
C1336
1-116-737-11
1-118-386-11
1-118-386-11
1-118-386-11
1-162-923-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
1uF
0.1uF
0.1uF
0.1uF
47PF
20%
10%
10%
10%
5%
10V
16V
16V
16V
50V
C850
C851
C852
C861
1-118-359-11
1-112-746-11
1-112-746-11
1-116-716-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
10uF
4.7uF
4.7uF
10uF
10%
10%
10%
10%
16V
6.3V
6.3V
16V
C1337
C1338
C1339
C1341
1-118-386-11
1-162-923-11
1-118-045-11
1-118-403-11
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
CERAMIC CHIP
0.1uF
47PF
2.2uF
0.001uF
10%
5%
10%
10%
16V
50V
25V
50V
11
MEX-M70BT
MAIN
Ref. No.
Part No.
Description
C1342
1-118-403-11
CERAMIC CHIP 0.001uF
10%
50V
Remark
* C1344
C1353
C1358
1-116-738-11
1-118-361-11
1-162-966-91
CERAMIC CHIP 1uF
CERAMIC CHIP 0.1uF
CERAMIC CHIP 0.0022uF
10%
10%
10%
6.3V
50V
50V
< CONNECTOR >
CN101
CN301
CN701
CN801
1-842-266-22
1-843-330-11
1-843-775-11
1-779-886-11
CN1002
1-821-559-11
SOCKET, CONNECTOR 20P
PIN, CONNECTOR 16P
CONNECTOR, FFC/FPC (ZIF) 27P
SOCKET, MINIATURE DIN CONNECTOR
(SIRIUSXM IN)
CONNECTOR, COAXIAL (SMT TYPE)
CN1004
CN1300
1-784-650-21
1-779-993-11
CONNECTOR 2P
PIN, CONNECTOR (PWB) 5P
< DIODE >
D114
D301
D303
D304
D401
6-502-969-01
6-503-548-01
6-503-238-01
6-502-961-01
6-502-961-01
DIODE
DIODE
DIODE
DIODE
DIODE
DZ2J06800L
DB2441600L
GN1G
DA2J10100L
DA2J10100L
D501
D502
D801
D802
D805
6-503-759-01
6-503-759-01
6-504-041-01
6-502-972-01
6-503-031-01
DIODE
DIODE
DIODE
DIODE
DIODE
RB751V40, 115
RB751V40, 115
RB050L-60
DZ2J09100L
DZ2J18000L
* D806
D808
D809
D811
D812
6-503-973-01
6-503-031-01
6-503-031-01
6-503-031-01
6-503-238-01
DIODE
DIODE
DIODE
DIODE
DIODE
RSX205L-30TE25
DZ2J18000L
DZ2J18000L
DZ2J18000L
GN1G
D813
D814
D816
D817
D818
6-503-031-01
6-502-961-01
6-504-047-01
6-503-016-01
6-503-031-01
DIODE
DIODE
DIODE
DIODE
DIODE
DZ2J18000L
DA2J10100L
RSX051VA-30
DZ2J07500L
DZ2J18000L
D1001
D1002
D1003
* D1300
D1306
6-502-969-01
6-502-969-01
6-502-969-01
6-503-973-01
6-503-759-01
DIODE
DIODE
DIODE
DIODE
DIODE
DZ2J06800L
DZ2J06800L
DZ2J06800L
RSX205L-30TE25
RB751V40, 115
D1309
6-503-548-01
DIODE DB2441600L
< FUSE >
F801
1-576-415-11
FUSE (2 A/32 V)
< FERRITE BEAD >
FB02
FB101
FB302
FB404
FB501
1-400-334-21
1-500-113-22
1-481-746-11
1-500-113-22
1-500-113-22
FERRITE, EMI (SMD) (1608)
BEAD, FERRITE (CHIP) (1608)
SDM EMI FERRITE
BEAD, FERRITE (CHIP) (1608)
BEAD, FERRITE (CHIP) (1608)
FB504
FB505
FB702
FB703
FB801
1-500-113-22
1-400-823-11
1-469-084-21
1-469-084-21
1-500-113-22
BEAD, FERRITE (CHIP) (1608)
EMI FERRITE (SMD) (1005)
INDUCTOR, FERRITE BEAD (1005)
INDUCTOR, FERRITE BEAD (1005)
BEAD, FERRITE (CHIP) (1608)
FB802
FB803
1-500-113-22
1-500-113-22
BEAD, FERRITE (CHIP) (1608)
BEAD, FERRITE (CHIP) (1608)
Ref. No.
Part No.
Description
FB804
FB805
FB1003
1-500-113-22
1-500-113-22
1-500-113-22
BEAD, FERRITE (CHIP) (1608)
BEAD, FERRITE (CHIP) (1608)
BEAD, FERRITE (CHIP) (1608)
FB1004
FB1005
FB1300
FB1301
1-500-113-22
1-500-113-22
1-469-094-21
1-469-094-21
BEAD, FERRITE (CHIP) (1608)
BEAD, FERRITE (CHIP) (1608)
FERRITE, EMI (SMD) (1608)
FERRITE, EMI (SMD) (1608)
< IC/BT MODULE >
IC301
IC401
IC402
IC501
IC502
6-720-774-01
6-721-140-01
6-721-168-01
6-719-855-01
6-721-462-01
IC
IC
IC
IC
IC
PURE5001H-4WX
NJW4190R-A (TE2)
BD3468FV-E2
BU4228F-STR
MX25L3235EM2I-10G-A01 (for SERVICE)
(See Note 1)
IC503
IC504
IC702
IC703
IC704
6-721-336-01
6-710-376-01
6-717-694-01
6-716-355-01
6-716-355-01
IC
IC
IC
IC
IC
R7S7200022CFP
74LVC1G17GW-125
BU33TD3WG-TR
BU15TD3WG-TR
BU15TD3WG-TR
IC705
IC801
IC802
IC803
IC804
6-715-712-11
6-709-182-01
6-710-376-01
6-721-184-01
(Not supplied)
IC
IC
IC
IC
IC
TC94A99FG-003 (SYCH
TC7WH126FK
74LVC1G17GW-125
BD49100RFS-E2
BD60HC0WEFJ-E2 (See Note 2)
IC805
IC1001
IC1002
IC1003
IC1009
6-719-012-01
6-717-694-01
(Not supplied)
6-703-863-01
(Not supplied)
IC S-13A1A12-E6T1U3
IC BU33TD3WG-TR
BT MODULE (WB113C) (See Note 2)
IC NJM2781RB1
IC MFI337S3959 (See Note 2)
IC1051
IC1300
IC1301
IC1302
6-716-858-01
6-718-913-01
6-718-416-01
6-717-694-01
IC
IC
IC
IC
NLASB3157DFT2G
OZ539IGN-A1-0-TR
uPD720114GA-YEU-AT-SAK
BU33TD3WG-TR
< JACK >
J001
J401
J801
J1001
1-843-791-11
1-822-714-21
1-566-822-81
1-566-822-91
JACK (ANT) (ANTENNA IN)
JACK, PIN 6P (FRONT/REAR/SUB AUDIO OUT)
JACK (REMOTE IN)
JACK (MIC)
< COIL >
L01
L301
L401
L501
L502
1-400-073-21
1-456-617-11
1-469-844-11
1-414-842-21
1-414-842-21
INDUCTOR
COIL, CHOKE
INDUCTOR
INDUCTOR
INDUCTOR
4.7uH
L504
L505
L801
L802
L1301
1-400-073-21
1-400-073-21
1-460-704-11
1-481-904-11
1-481-904-11
INDUCTOR
INDUCTOR
COIL, CHOKE
INDUCTOR
INDUCTOR
4.7uH
4.7uH
22uH
47uH
47uH
L1302
L1303
L1304
L1305
L1307
1-414-842-21
1-414-842-21
1-414-842-21
1-414-842-21
1-457-223-11
INDUCTOR
15nH
INDUCTOR
15nH
INDUCTOR
15nH
INDUCTOR
15nH
COMMON MODE CHOKE COIL
2.2uH
15nH
15nH
< TRANSISTOR >
Q401
Q402
Note 1: When IC502 on the MAIN board is replaced, the destination
setting is necessary. Refer to “DESTINATION SETTING
METHOD” on page 4 on original service manual.
12
Remark
6-552-936-01
6-552-922-01
TRANSISTOR
TRANSISTOR
LTC014EUBFS8TL
LTA014EUBFS8TL
Note 2: IC804, IC1002 and IC1009 on the MAIN board
cannot replace with single. When these parts are
damaged, replace the complete mounted board.
MEX-M70BT
MAIN
Ref. No.
Part No.
Description
Q403
Q404
Q405
6-552-856-01
6-552-856-01
6-552-856-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
LTC914TUBFS8TL
LTC914TUBFS8TL
LTC914TUBFS8TL
Remark
Q406
Q407
Q408
Q701
Q801
6-552-856-01
6-552-856-01
6-552-856-01
6-551-120-01
6-552-936-01
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
TRANSISTOR
LTC914TUBFS8TL
LTC914TUBFS8TL
LTC914TUBFS8TL
2SA2119K
LTC014EUBFS8TL
Q802
Q803
Q805
Q806
Q807
6-552-922-01
6-553-498-01
6-553-497-01
6-552-892-01
6-552-892-01
TRANSISTOR
FET
FET
TRANSISTOR
TRANSISTOR
LTA014EUBFS8TL
NTTFS5116PLTWG
NVTFS5124PLTWG
LSCR523UBFS8TL
LSCR523UBFS8TL
Q808
Q810
Q811
Q812
Q813
6-552-922-01
6-553-496-01
6-553-496-01
6-552-949-01
6-552-936-01
TRANSISTOR
FET
FET
TRANSISTOR
TRANSISTOR
LTA014EUBFS8TL
RSD046P05TL
RSD046P05TL
LTC044EUBFS8TL
LTC014EUBFS8TL
Q814
6-552-892-01
TRANSISTOR
LSCR523UBFS8TL
< RESISTOR >
R02
R09
R10
R11
R012
1-216-864-11
1-218-953-11
1-218-990-81
1-218-941-81
1-216-864-11
SHORT CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
SHORT CHIP
0
1K
0
100
0
R21
R102
R103
R104
R105
1-216-864-11
1-216-864-11
1-216-825-11
1-216-817-11
1-218-966-11
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
0
2.2K
470
12K
R107
R108
R301
R302
R303
1-218-966-11
1-216-817-11
1-216-214-00
1-216-864-11
1-218-965-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
12K
470
4.7K
0
10K
R304
R305
R306
R307
R308
1-216-864-11
1-218-953-11
1-218-953-11
1-218-953-11
1-218-953-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
1K
1K
1K
1K
R309
R310
R311
R312
R315
1-218-943-11
1-218-973-11
1-216-864-11
1-218-973-11
1-216-833-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
R316
R317
R318
R319
R320
1-250-515-11
1-216-833-11
1-250-515-11
1-250-515-11
1-216-833-11
R321
R322
R323
R401
R404
R406
R407
R408
R409
5%
1/16W
5%
1/16W
Ref. No.
Part No.
Description
R410
1-216-295-91
SHORT CHIP
0
Remark
R411
R412
R413
R414
R415
1-250-519-11
1-216-296-11
1-250-600-11
1-250-656-11
1-250-515-11
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
0
220
47K
6.8K
R416
R417
R420
R421
R422
1-216-864-11
1-250-656-11
1-250-519-11
1-250-600-11
1-250-600-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
47K
10K
220
220
R423
R424
R425
R426
R427
1-250-656-11
1-218-990-81
1-218-990-81
1-218-990-81
1-218-990-81
METAL CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
47K
0
0
0
0
R428
R429
R430
R431
R432
1-218-990-81
1-218-990-81
1-218-990-81
1-218-990-81
1-250-656-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
R433
R434
R435
R436
R437
1-250-600-11
1-250-600-11
1-250-656-11
1-250-656-11
1-218-953-11
R438
R439
R440
R501
R502
1%
1/16W
1%
1%
1%
1/10W
1/10W
1/16W
1%
1%
1%
1%
1/10W
1/16W
1/10W
1/10W
1%
1/10W
0
0
0
0
47K
1%
1/10W
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
220
220
47K
47K
1K
1%
1%
1%
1%
5%
1/10W
1/10W
1/10W
1/10W
1/16W
1-250-600-11
1-218-990-81
1-218-990-81
1-218-941-81
1-218-941-81
METAL CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
220
0
0
100
100
1%
1/10W
5%
5%
1/16W
1/16W
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
1-216-864-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
100
100
100
100
0
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
5%
5%
5%
1/10W
1/10W
1/16W
5%
5%
5%
1/16W
1/10W
1/8W
5%
1/16W
R503
R504
R505
R506
R507
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R509
R510
R511
R512
R513
1-218-941-81
1-218-953-11
1-218-953-11
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
1K
1K
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
150
47K
0
47K
10K
5%
5%
1/16W
1/16W
5%
5%
1/16W
1/10W
R514
R515
R516
R517
R519
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
6.8K
10K
6.8K
6.8K
10K
1%
5%
1%
1%
5%
1/16W
1/10W
1/16W
1/16W
1/10W
R520
R521
R522
R523
R524
1-218-941-81
1-218-977-11
1-218-941-81
1-218-977-11
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100K
100
100K
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
1-250-515-11
1-216-833-11
1-218-990-81
1-218-933-11
1-208-939-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
6.8K
10K
0
22
150K
1%
5%
1/16W
1/10W
METAL CHIP
METAL CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
100
100
0
0
100K
1/16W
1/16W
1/16W
1/16W
1-218-941-81
1-218-941-81
1-218-990-81
1-218-990-81
1-218-977-11
5%
5%
5%
0.5%
R525
R526
R527
R528
R529
5%
1/16W
1-216-864-11
1-216-296-11
1-216-296-11
1-216-296-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
0
0
0
0
R533
R534
R535
R538
1-218-990-81
1-218-957-11
1-218-957-11
1-218-957-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
2.2K
2.2K
2.2K
5%
5%
5%
1/16W
1/16W
1/16W
13
MEX-M70BT
MAIN
Ref. No.
Part No.
Description
Part No.
Description
R539
1-218-957-11
METAL CHIP
2.2K
5%
1/16W
R612
1-218-941-81
METAL CHIP
100
5%
1/16W
R540
R541
R542
R544
R545
1-218-971-81
1-218-977-11
1-218-941-81
1-218-971-81
1-218-965-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
33K
100K
100
33K
10K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R613
R614
R615
R616
R617
1-218-977-11
1-218-977-11
1-218-977-11
1-218-990-81
1-218-977-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
100K
100K
100K
0
100K
5%
5%
5%
1/16W
1/16W
1/16W
5%
1/16W
R546
R547
R548
R549
R550
1-218-965-11
1-218-965-11
1-218-965-11
1-218-977-11
1-218-990-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
10K
10K
10K
100K
0
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
R618
R619
R621
R622
R623
1-218-941-81
1-218-941-81
1-218-953-11
1-218-941-81
1-218-953-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
1K
100
1K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R551
R552
R553
R554
R555
1-216-809-11
1-218-949-11
1-218-941-81
1-216-809-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
470
100
100
100
5%
5%
5%
5%
5%
1/10W
1/16W
1/16W
1/10W
1/10W
R624
R625
R626
R627
R628
1-218-941-81
1-218-941-81
1-218-977-11
1-218-941-81
1-218-953-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100K
100
1K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R556
R557
R558
R559
R560
1-216-809-11
1-218-941-81
1-218-977-11
1-218-977-11
1-216-845-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100K
100K
100K
5%
5%
5%
5%
5%
1/10W
1/16W
1/16W
1/16W
1/10W
R629
R630
R631
R632
R633
1-218-941-81
1-218-941-81
1-218-965-11
1-218-965-11
1-218-965-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
10K
10K
10K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R561
R562
R563
R565
R566
1-218-941-81
1-250-519-11
1-250-519-11
1-218-949-11
1-250-519-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
10K
10K
470
10K
5%
1%
1%
5%
1%
1/16W
1/16W
1/16W
1/16W
1/16W
R634
R635
R637
R638
R639
1-218-941-81
1-218-977-11
1-218-977-11
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100K
100K
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R567
R568
R571
R572
R573
1-218-990-81
1-218-990-81
1-218-990-81
1-218-977-11
1-218-977-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
0
0
0
100K
100K
5%
5%
1/16W
1/16W
R640
R641
R642
R643
R644
1-218-977-11
1-218-977-11
1-218-941-81
1-218-977-11
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
100
100K
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R574
R576
R578
R579
R582
1-218-990-81
1-218-977-11
1-218-941-81
1-250-553-11
1-218-977-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
100K
100
270K
100K
5%
5%
1%
5%
1/16W
1/16W
1/16W
1/16W
R646
R647
R648
R649
R650
1-218-965-11
1-218-977-11
1-218-977-11
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
100K
100K
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
* R583
R585
R586
R587
R590
1-250-513-11
1-218-977-11
1-218-977-11
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
5.6K
100K
100K
100
100
1%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R651
R652
R653
R654
R655
1-218-941-81
1-218-941-81
1-218-957-11
1-218-990-81
1-216-864-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
SHORT CHIP
100
100
2.2K
0
0
5%
5%
5%
1/16W
1/16W
1/16W
R591
R592
R593
R594
R597
1-218-977-11
1-218-977-11
1-218-941-81
1-218-990-81
1-218-981-81
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
100K
100K
100
0
220K
5%
5%
5%
1/16W
1/16W
1/16W
5%
1/16W
R656
R657
R658
R659
R660
1-218-941-81
1-218-977-11
1-218-941-81
1-216-833-11
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100K
100
10K
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/10W
1/16W
R598
R599
R600
R601
R602
1-218-977-11
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100
100
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R662
R665
R666
R680
R681
1-218-965-11
1-218-941-81
1-216-296-11
1-218-941-81
1-218-977-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
10K
100
0
100
100K
5%
5%
1/16W
1/16W
5%
5%
1/16W
1/16W
R603
R604
R605
R606
R607
1-218-941-81
1-218-941-81
1-218-977-11
1-218-977-11
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100K
100K
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R682
R683
R684
R701
R702
1-218-977-11
1-218-990-81
1-216-295-91
1-216-864-11
1-218-990-81
METAL CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
100K
0
0
0
0
5%
1/16W
R608
R609
R610
R611
1-218-990-81
1-218-941-81
1-218-941-81
1-218-941-81
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
100
100
100
5%
5%
5%
1/16W
1/16W
1/16W
R703
R704
R705
R706
1-216-864-11
1-216-864-11
1-218-990-81
1-216-864-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
0
0
0
0
14
Remark
Ref. No.
Remark
MEX-M70BT
MAIN
Ref. No.
Part No.
Description
R707
1-216-864-11
SHORT CHIP
0
Remark
R708
R709
R711
R712
R714
1-216-864-11
1-218-953-11
1-216-864-11
1-242-967-11
1-208-637-11
SHORT CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
0
1K
0
1
12
R715
R717
R718
R719
R720
1-216-864-11
1-218-990-81
1-218-941-81
1-218-941-81
1-218-990-81
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
0
0
100
100
0
R721
R722
R723
R724
R725
1-218-941-81
1-218-941-81
1-218-941-81
1-218-947-11
1-218-947-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
R726
R727
R728
R729
R731
1-218-969-11
1-218-990-81
1-218-969-11
1-218-947-11
1-216-864-11
R732
R733
R734
R735
R737
5%
1/16W
5%
0.5%
1/16W
1/16W
Ref. No.
Part No.
Description
R814
1-218-966-11
METAL CHIP
12K
5%
1/16W
Remark
R815
R816
R817
R818
R819
1-257-321-11
1-257-321-11
1-216-864-11
1-218-966-11
1-216-845-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
0.039
0.039
0
12K
100K
1%
1%
1/2W
1/2W
5%
5%
1/16W
1/10W
R821
R822
R823
R825
R826
1-216-821-11
1-250-602-11
1-250-632-11
1-208-923-11
1-208-946-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
270
4.7K
33K
300K
5%
1%
1%
0.5%
0.5%
1/10W
1/10W
1/10W
1/16W
1/16W
5%
5%
1/16W
1/16W
100
100
100
330
330
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R827
R828
R829
R830
R831
1-250-557-11
1-250-541-11
1-216-809-11
1-250-533-11
1-218-977-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
390K
82K
100
39K
100K
1%
1%
5%
1%
5%
1/16W
1/16W
1/10W
1/16W
1/16W
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
22K
0
22K
330
0
5%
1/16W
5%
5%
1/16W
1/16W
R832
R833
R834
* R835
R836
1-250-495-11
1-250-495-11
1-216-809-11
1-250-540-11
1-216-809-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
1K
100
75K
100
1%
1%
5%
1%
5%
1/16W
1/16W
1/10W
1/16W
1/10W
1-218-947-11
1-218-990-81
1-218-990-81
1-218-947-11
1-218-990-81
METAL CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
SHORT CHIP
330
0
0
330
0
5%
1/16W
5%
1/16W
R837
* R838
R839
* R840
R841
1-216-839-11
1-250-545-11
1-250-563-11
1-250-545-11
1-218-977-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
33K
120K
680K
120K
100K
5%
1%
1%
1%
5%
1/10W
1/16W
1/16W
1/16W
1/16W
* R738
R739
R740
R741
R742
1-250-503-11
1-218-989-11
1-218-941-81
1-218-958-11
1-218-958-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
2.2K
1M
100
2.7K
2.7K
1%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R842
R845
R846
R847
R848
1-218-990-81
1-218-990-81
1-250-495-11
1-216-864-11
1-216-801-11
SHORT CHIP
SHORT CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
0
0
1K
0
22
1%
1/16W
5%
1/10W
R743
R744
R745
R747
R748
1-218-965-11
1-218-965-11
1-218-990-81
1-218-977-11
1-218-983-11
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
10K
10K
0
100K
330K
5%
5%
1/16W
1/16W
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
39K
68K
0
10K
2.7K
1/16W
1/16W
1/16W
1/16W
1-218-972-11
1-218-975-11
1-218-990-81
1-250-519-11
1-208-897-81
5%
5%
5%
5%
R849
R850
R851
R852
R853
1%
0.5%
1/16W
1/16W
R749
R750
R751
R752
R753
1-218-977-11
1-218-967-11
1-216-841-11
1-218-941-81
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
15K
47K
100
100
5%
5%
5%
5%
5%
1/16W
1/16W
1/10W
1/16W
1/16W
* R854
R856
R857
R858
R859
1-250-543-11
1-216-073-91
1-218-973-11
1-218-961-11
1-216-073-91
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
10K
47K
4.7K
10K
1%
5%
5%
5%
5%
1/16W
1/10W
1/16W
1/16W
1/10W
R754
R755
R756
R757
R758
1-218-941-81
1-218-941-81
1-218-941-81
1-218-941-81
1-218-977-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100K
5%
5%
5%
5%
5%
1/16W
1/16W
1/16W
1/16W
1/16W
R860
R861
R862
R863
R865
1-218-973-11
1-218-969-11
1-218-977-11
1-218-990-81
1-208-948-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
47K
22K
100K
0
360K
5%
5%
5%
1/16W
1/16W
1/16W
0.5%
1/16W
R760
R761
R762
R763
R803
1-218-977-11
1-218-977-11
1-216-845-11
1-218-977-11
1-250-525-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
100K
100K
18K
5%
5%
5%
5%
1%
1/16W
1/16W
1/10W
1/16W
1/16W
R868
R869
R870
R871
R872
1-216-821-11
1-216-821-11
1-250-495-11
1-248-473-11
1-245-453-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
1K
1K
1K
0.068
0.047
5%
5%
1%
1%
1%
1/10W
1/10W
1/16W
1/2W
1/2W
* R805
R806
* R807
R808
R809
1-250-543-11
1-218-977-11
1-250-529-11
1-250-640-11
1-250-640-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100K
100K
27K
10K
10K
1%
5%
1%
1%
1%
1/16W
1/16W
1/16W
1/10W
1/10W
R878
R888
R890
R892
R894
1-216-296-11
1-216-864-11
1-216-864-11
1-216-864-11
1-218-977-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
0
0
0
0
100K
5%
1/16W
* R810
R811
R812
R813
1-250-523-11
1-218-990-81
1-218-941-81
1-216-821-11
METAL CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
15K
0
100
1K
1%
1/16W
5%
5%
1/16W
1/10W
R1001
R1002
R1003
R1004
1-216-296-11
1-216-296-11
1-218-977-11
1-218-941-81
SHORT CHIP
SHORT CHIP
METAL CHIP
METAL CHIP
0
0
100K
100
5%
5%
1/16W
1/16W
15
MEX-M70BT
MAIN
Ref. No.
Part No.
Description
R1005
1-218-941-81
METAL CHIP
100
5%
1/16W
R1006
R1007
R1010
R1011
R1012
1-218-941-81
1-218-990-81
1-218-990-81
1-218-990-81
1-216-864-11
METAL CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
100
0
0
0
0
5%
1/16W
R1013
R1014
R1015
R1016
R1017
1-218-990-81
1-218-941-81
1-218-933-11
1-216-809-11
1-218-933-11
SHORT CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
0
100
22
100
22
5%
5%
5%
5%
1/16W
1/16W
1/10W
1/16W
R1018
R1019
R1020
R1021
R1023
1-216-809-11
1-218-941-81
1-216-809-11
1-216-809-11
1-218-941-81
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
100
100
100
100
100
5%
5%
5%
5%
5%
1/10W
1/16W
1/10W
1/10W
1/16W
R1024
R1025
R1028
R1029
R1030
1-218-977-11
1-218-941-81
1-218-990-81
1-218-990-81
1-218-941-81
METAL CHIP
METAL CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
100K
100
0
0
100
5%
5%
1/16W
1/16W
5%
1/16W
R1031
R1032
R1033
R1035
R1036
1-218-957-11
1-218-965-11
1-218-967-11
1-218-990-81
1-218-951-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
2.2K
10K
15K
0
680
5%
5%
5%
1/16W
1/16W
1/16W
5%
1/16W
R1037
R1040
R1052
R1055
R1056
1-218-937-11
1-250-525-11
1-216-864-11
1-216-864-11
1-216-864-11
METAL CHIP
METAL CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
47
18K
0
0
0
5%
1%
1/16W
1/16W
R1090
R1117
R1145
R1173
R1300
1-218-990-81
1-218-990-81
1-216-296-11
1-216-296-11
1-218-953-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
METAL CHIP
0
0
0
0
1K
5%
1/16W
R1301
R1302
R1303
R1304
R1306
1-218-871-11
1-216-849-11
1-216-809-11
1-218-885-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
220K
100
39K
1K
0.5%
5%
5%
0.5%
5%
1/10W
1/10W
1/10W
1/10W
1/10W
R1307
R1309
R1310
R1311
R1312
1-208-911-11
1-250-541-11
1-250-541-11
1-250-664-11
1-216-821-11
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
METAL CHIP
10K
82K
82K
100K
1K
0.5%
1%
1%
1%
5%
1/16W
1/16W
1/16W
1/10W
1/10W
R1313
R1314
R1316
R1317
R1318
1-216-864-11
1-218-977-11
1-216-833-11
1-216-864-11
1-246-184-81
SHORT CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
0
100K
10K
0
2.43K
5%
5%
1/16W
1/10W
0.5%
1/16W
R1320
R1333
R1334
R1350
R1353
1-216-821-11
1-218-977-11
1-218-953-11
1-216-864-11
1-218-989-11
METAL CHIP
METAL CHIP
METAL CHIP
SHORT CHIP
METAL CHIP
1K
100K
1K
0
1M
5%
5%
5%
1/10W
1/16W
1/16W
5%
1/16W
R1354
R1355
R1358
R1359
1-216-296-11
1-216-864-11
1-216-864-11
1-216-864-11
SHORT CHIP
SHORT CHIP
SHORT CHIP
SHORT CHIP
0
0
0
0
16
Remark
Ref. No.
* R1361
Part No.
Description
1-250-513-11
METAL CHIP
Remark
5.6K
1%
1/16W
< TUNER UNIT >
TU01
A-1946-531-A
TUX-DSP03 (TUNER UNIT)
< VIBRATOR >
X501
X502
X503
X701
X1300
1-814-485-11
1-814-767-11
1-814-777-11
1-814-778-11
1-814-367-11
QUARTZ CRYSTAL UNIT (48 MHz)
QUARTZ CRYSTAL UNITS (13.333 MHz)
QUARTZ CRYSTAL UNITS (32.768 kHz)
QUARTZ CRYSTAL UNITS (16.9344 MHz)
QUARTZ CRYSTAL UNITS (30 MHz)
MEX-M70BT
MEMO
17
MEX-M70BT
REVISION HISTORY
Checking the version allows you to jump to the revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Ver.
Date
Description of Revision
1.0
2014.01
New
1.1
2014.04
Deletion of Part No. for Ref. No. IC804 (Not supplied)
Change of Part No. for INSTRUCTION MANUAL and INSTALL INSTRUCTION MANUAL
Change of MAIN board (Suffix-41) and Deletion of REGULATOR board (SUPPLEMENT-1)
(SMR-13058)
(SMR-14027)
1.2
2014.10
Applicable to areas other than the US and Canadian
1.3
2014.12
Applicable to the NFCtagWriter of ver. 1.0.2
Change of CABLE FLEXIBLE FLAT (27 CORE) (Ref. No. FFC1)
Change of SHEET HEAT TRANSFER (Ref. No. 52)
Change of Part No. for INSTRUCTION MANUAL and KEY (FRAME) (Ref. No. 502)
Change of Part for Ref. No. C102, R894, R1301, R1302, R1304 and R1307 on the MAIN board
(SUPPLEMENT-1)
Deletion of Part for Ref. No. C875, CN502 and CN1001 on the MAIN board (SUPPLEMENT-1)
Change of MAIN board (Suffix-42) (SUPPLEMENT-2)
(SMR-14043)
Download PDF