Counters, Timers Hour Meters
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
Automation & Control Gear
Counters, Timers & Hour Meters - contents
55 Control Gear & Switchgear
1269
1333
Mechanical Counters
1333
Electromech - Impulse
Counters
1334
Electronic Counters
1336
Rate/Frequency/Tachometers
1340
Electromechanical Hour
Meters
1341
Time Delay Relays
1349
Time Switch, DIN
1364
Time Switch, Industrial
1367
Time Switch, Plug-in
1369
57 Fluid Management & Control
1372
58 Industrial Circuit Protection
1400
59 Machine Guarding
1414
60 Motors & Motor Controllers
1436
61 Panel Meters
1457
62 PLCs, Industrial Networking
& Data Acquisition
1479
63 Signal Conditioning & Relay
Controllers
1489
64 Sensors & Transducers Factory Automation
1511
65 Sensors & Transducers Process Automation
1553
66 Sounders & Beacons
1580
67 Temperature Control &
Process Heating
1611
Visit our website for additional price information and exciting promotions
56
1331
www.nguyenxuong.com
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
Stroke Counters - 301 Series, No
Casing
Trumeter Reciprocal & Tally Counters
Miniature adding counter without housing
5 digits, 4.2mm high
500 strokes per minute
Left hand stroke
Non resettable
Switching distance: 46° to 49°
Dimensions: H18 x W18 x D18.5mm
Miniature mechanical stroke - resettable
Small resettable
stroke counters
designed for
light duty operation
Up to 1,000 counts per minute
Left or right handed version
available
Supplied with: standard stroke lever
attached via a clamping screw allowing
full 360° adjustment.
Product Index
Digit Height
Direction Of Rotation
Model
Number Of Digits
Resettable
Size
Stock no.
Right handed stroke counter
Left handed stroke counter
Stock no.
166-002
Price per
OM
S$
1+
38·90
unit
S$
6+
38·10
S$
12+
37·40
56
Non-Resettable
Stroke
4.8 mm
Top Coming
Description
Manu. Part No.
Top coming 0301407
Price per
710-5228
a710-5219
unit
unit
5
Yes
21.5 x 37 x 25 mm
OM
S$
1+
1+
34·30
47·50
S$
S$
Totalising counter actuated by presence of a magnetic field
No power supply required
Polycarbonate housing
Centre pole magnet with countersunk central fixing hole available
separately
Magnet stock no. 260-369, 20mm diameter, 10 mm height
Supplied with 3 types of mounting brackets
Provision for fitting a cable tie
Height
Width
Depth
Digit Height
Hand held/desk mounted - resettable
20 mm Number Of Digits
27 mm IP Rating
25 mm Operating Temperature Range
4 mm
6
IP65
-10 to +60 °C
Stock no.
OM
S$
1+
62·50
260-375
Price per
unit
S$
6+
58·00
S$
12+
57·00
50cm Metric Counter Top Going
A range of tally counters offering either a hand held or desk mounted single tally counter, or a 4-way
desk mounted bank of tally counters. These are suitable for applications such as traffic monitoring,
pedestrian or footfall crowd counting, airline passenger totalisation and many more.
Positive action mechanism for accurate counting with feedback
Easy to use reliable count mechanism
Product Index
Digit Height
Description
Hand held
Desk Mount
4-way Desk Mount
Description
Hand tally
4 mm
Stock no.
Hand held
Desk Mount
4-way Desk Mount
710-5212
710-5216
a710-5225
Number Of Digits
Resettable
Size (mm)
65 x 39 x 46
65 x 30.5 x 53
1,350 x 730 x 730
Price per
unit
unit
unit
OM
S$
4
Yes
Stock no.
710-5212
710-5216
710-5225
S$
S$
Flush Mount Stroke Counters - 309
Series
Type C stroke lever, 31.5mm
OM
S$
165-740
unit
1+
70·50
OM
S$
1+
12·30
S$
6+
65·50
S$
12+
64·00
Price per
unit
S$
15+
11·40
S$
25+
11·20
Surface Mount Stroke Counters - 301
series
Manu. Part No.
Top coming 0301509
Top going 0301510
Stock no.
165-712
165-734
Type C stroke lever, 31.5mm
Stock no.
165-627
48 mm
60 mm
28 mm
4.5 mm
S$
S$
1+ 275·00
6+ 255·00
S$
Number Of Digits
Shaft Speed Max
Drive Shaft Diameter
Operating Temperature Range
Price per
5
300 rpm
4 mm
0 to +60 °C
OM
unit
S$
S$
1+ 185·50
6+ 170·50
S$
Centre hole ferrite ring magnet with a high resistance to demagnetisation
Ideal for actuating totalising counter (stock no 260-375 ) at a distance of
15mm
Suitable for reed relays, reed proximity switches and hall effect IC
switches
Other uses include its incorporation in various small magnetic
assemblies such as separators and filters
20mm diameter, 10mm high
10 mm
20 mm
Stock no.
260-369
Price per
unit
OM
S$
5+
3·82
S$
30+
3·54
S$
60+
3·48
Kubler Length Measuring Systems
Mini Measurement System
Price per
unit
unit
OM
S$
1+
1+
72·50
89·00
S$
6+
6+
67·50
83·00
15+
11·40
S$
12+
12+
66·00
81·00
25+
11·20
Accessories
Description
OM
unit
Height
Dia.
Miniature adding counter - surface mount
5 digits, 4.2mm high
500 strokes per minute
Right hand stroke
Non-resettable
Switching distance: 46° to 49°
Dimensions: H22.5 x W32 x D21mm
Model
Price per
5
400 rpm
7 mm
0 to +60 °C
Centre Hole Magnet
Price
per
165-627
Number Of Digits
Shaft Speed Max
Drive Shaft Diameter
Operating Temperature Range
20cm Metric Counter Top Going
298-9438
Stock no.
Stock no.
298-9444
Stock no.
Accessories
Description
64 mm
92 mm
45 mm
7 mm
Stock no.
Height
Width
Depth
Digit Height
Miniature flush mount adding counter
5 digits, 4.2mm high
500 strokes per minute
Right hand stroke
Non-resettable
Switching distance: 46° to 49°
Dimensions: H24 x W32 x D22.5mm
5 digit RH stroke counter, top going
Height
Width
Depth
Digit Height
Counts upwards
Metric counter with a 20 cm
measuring wheel (synthetic scored
housing)
Fast zero reset via an
interchangeable handle (left or
right)
1+ 21·00
1+ 26·20
1+ 112·00
Hengstler & IVO
Description
Counts upwards
Metric counter with a 50 cm
measuring wheel (synthetic
scoring housing)
Fast zero reset via an
interchangeable handle (left or
right)
Price per
unit
OM
S$
1+
12·30
S$
S$
Incremental interface
Compact design (74 mm x 50 mm x 52 mm)
Easy to install, one unit
Measuring wheel circumference 100 mm
Resolution 0.1 mm
Cable outlet radial, 2 m PVC cable
Max speed: 2000/min
Output circuit: push-pull with inversion
Power supply: 8 to 30 Vdc
Visit our website for additional price information and exciting promotions
1333
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Counters, Timers & Hour Meters
Accessories
Manu. Part No.
Stock no.
05.2400.0040.1000.5045
704-0727
Price per
unit
OM
S$
1+
510·00
S$
S$
Height
Width
Depth
Price per
375-1262
OM
unit
S$
6+
S$
97·00
1 x rotary transducer type 5802 (RS 375-1290)
1 x pre-assembled cable 3m and 12 way mating connector
1 x rotary transducer holder
1 x pre-set counter 716 90-250Vac or 1 x dual pre-set counter
717
1 x measuring wheel, Vulcolan, smooth
Max Pulse Signal
Supply voltage
Fequency type
(Vdc)
400Hz
Push - Pull 10 - 30
375-1278
Price
per
OM
S$
Operating
temperature (°C)
-20 to +70
S$
S$
unit
1+ 142·00
375-1149
375-1256
375-1290
Price per
unit
unit
unit
OM
S$
1+
1+
1+
210·00
67·00
445·00
S$
6+
6+
6+
S$
Impulse Counter 12Vdc
Impulse Counter 24Vdc
Impulse Counter 110Vac
Impulse Counter 240Vac
Price per
257-199
259-892
259-971
259-870
OM
unit
unit
unit
unit
S$
S$
1+ 98·00
1+ 98·00
1+ 110·00
1+ 110·00
6+ 90·00
6+ 90·00
6+ 101·00
6+ 101·00
Stock no.
257-199
259-892
259-971
259-870
S$
12+
12+
12+
12+
88·00
88·00
99·00
99·00
Stock no.
Count Down 24Vdc
Count Down 220Vac
176-4834
176-4840
75 mm
60 mm
81 mm
5
51 x 51 mm
Manual
Minimum Pause Time (ms) Count Rate (pps)
25
20
50
10
OM
S$
S$
unit
unit
Price per
1+
1+
220·00
240·00
6+ 205·00
6+ 225·00
Price per
OM
S$
1+
31·00
Stock no.
176-4834
176-4840
S$
Accessories
Description
Stock no.
330-660
unit
S$
6+
28·60
S$
12+
27·70
Height
40 mm
Width
51 mm
Depth
65.5 mm
Description
Digit Height
Panel Cut Out
Description
Stock no.
866 Series 24Vdc
866 Series 115Vac
866 Series 240Vac
61.3 mm
51 x 51 mm
4 mm
52 x 27 mm
Supply
Power
Count
Voltage Consumption Rate (Hz)
24 V dc
2.5 W
25
115 V ac 2.75 VA
10
240 V ac 2.75 VA
10
866 Series 24Vdc
866 Series 115Vac
866 Series 240Vac
Isolated SPDT microswitch changes over when the counter
reaches the preselected count value, 230Vac 2A (contact load)
Contacts return to original position when counter is reset to zero
Depth
Panel Cut Out
Panel mounting 866 Series – 6 Digit
Rear connection via shrouded push-on terminals (supplied with
0.8 x 2.8mm receptacles)
198·00
63·00
415·00
Predetermining Batch
75 mm
60 mm
14·70
27·70
6+ 134·00
IVO
Height
Width
S$
12+
12+
Hengstler
Stock no.
Rotary transducer holder
3m cable assembly + conn.
Rotary transducer type 5802
15·20
28·60
Minimum Pulse Time Minimum Pause Time Count Rate
(msec)
(ms)
(pps)
25
25
20
25
25
20
50
50
10
50
50
10
Stock no.
Splashproof Cover
Accessories
Description
Power
Consumption
2W
2W
3 VA
3 VA
Description
Technical Specification - Encoders
Vulcolan Wheel 0.5m
Circumferance, 1mm accuracy
S$
6+
6+
6
51 x 26 mm
Manual
Height
Width
Depth
Number Of Digits
Panel Cut Out
Reset Type
Supply Voltage Minimum Pulse Time (msec)
24 V dc
25
220 V ac
50
Typical System Requirements
Stock no.
16·50
31·00
Counts down pulses from a pre-set value and triggers a
changeover contact on reaching zero
Contacts return to original position when counter is reset
to zero
Electrical connection via supplied plug in clips
Offers IP40 protection with cover
SPDT contact rated to 230Vac 2A
Linear measurement devices (metric) for linear
measurement of running material in the timber, paper,
metal or plastic industry
Used with 716 single preset counter (stock no. 309-6111)
or 717 dual preset (stock no. 309-6155)
The transducer does not require an additional power
supply as it can be supplied from the counter
Operating temperature -20 to +70°C
Accuracy ±1mm
Type Max Axial Weight Material
Load (N) (g)
5802 40
400
Stainless steel
S$
1+
1+
Count Down
Vulcolan Measuring Wheel
(0.5m circumference)
Description
Number Of Digits
Panel Cut Out
Reset Type
Description
S$
1+ 103·00
37.5 mm
60 mm
61.3 mm
Supply
Voltage
12 V dc
24 V dc
110 V ac
240 V ac
1 x rotary transducer type 5802 (RS 375-1290)
1 x pre-assembled cable 3m and 12 way mating connector
1 x rotary transducer holder
1 x single pre-set counter 716 90-250Vac or 1 x dual pre-set counter 717
1 x measuring wheel, Hytrel, grooved
Stock no.
OM
unit
unit
Impulse counters with reset button
Will count to 999999
Typical System Requirements
Hytrel Wheel 0.5m Circum.
Price per
330-626
330-660
Impulse Counter
Linear measurement devices (metric) for linear measurement
of running material
Used with 716 single preset counter (stock no. 309-6111) or
717 dual preset (stock no. 309-6155)
The transducer does not require an additional power supply as
it can be supplied directly from the counter
Grooved Hytrel measuring wheel for textiles
Operating temperature -20 to +70°C
Accuracy ±1mm
Description
Stock no.
Wiring Socket Manual Reset
Splashproof Cover
Hytrel Metric Measuring Wheel
(0.5m circumference)
56
Description
260-684
260-690
260-707
Price per
unit
unit
unit
Stock no.
260-684
260-690
260-707
OM
S$
S$
S$
1+ 95·00
1+ 110·00
1+ 113·00
6+ 88·50
6+ 102·50
6+ 105·00
12+ 86·50
12+ 100·00
12+ 103·00
S$
S$
S$
1+ 119·00
6+ 110·50
12+ 108·50
Panel Mounting 868 Series - 8 Digit
Rear connection via shrouded push-on terminals (supplied
with 0.8 x 2.8mm receptacles)
Reset Type
Supply Number Of Minimum Pulse
Voltage Digits
Time (msec)
Manual
24 V dc
6
25
Manual
110 V ac
6
50
Manual
230 V ac
6
50
Manual; Electrical 24 V dc
5
25
Manual; Electrical 110 V ac
5
50
Manual; Electrical 240 V ac
5
25
Count Rate Minimum Pause
(count/s)
Time (ms)
20
25
10
50
10
50
20
25
10
25
10
25
Reset Type
OM
S$
1+
1+
1+
1+
1+
1+
220·00
230·00
240·00
305·00
335·00
355·00
Manual
Manual
Manual
Manual; Electrical
Manual; Electrical
Manual; Electrical
1334
Stock no.
287-8243
287-8265
287-8271
330-648
330-632
258-962
Price per
unit
unit
unit
unit
unit
unit
OM = Order Multiple
S$
6+
6+
6+
6+
6+
6+
200·00
210·00
220·00
280·00
310·00
325·00
Stock no.
287-8243
287-8265
287-8271
330-648
330-632
258-962
S$
12+
12+
12+
12+
12+
12+
198·00
205·00
215·00
275·00
300·00
320·00
Digit Height
Number Of Digits
Count Rate
Supply Voltage (Vdc)
Panel Cut Out
4 mm
8
25 Hz
24
52 x 27 mm
Stock no.
260-729
Depth
Height
Width
IP Rating
Minimum Pulse Time (msec)
Price per
unit
65.5 mm
40 mm
51 mm
IP40
20
OM
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
Panel Mounting 864 Series - 6 Digit
Pulse Counter - W17.50
Rear connection via shrouded push-on terminals (supplied with
0.8 x 2.8mm receptacles)
Height
Width
Depth
40 mm
51 mm
65.5 mm
Description
864 Series 12Vdc
864 Series 24Vdc
864 Series 115Vac
864 Series 240Vac
Digit Height
Panel Cut Out
Reset Type
4 mm
52 x 27 mm
Manual
Supply Voltage
12 V dc
24 V dc
115 V ac
240 V ac
Description
Power Consumption
2.5 W
2.5 W
2.75 VA
2.75 VA
Stock no.
864 Series 12Vdc
864 Series 24Vdc
864 Series 115Vac
864 Series 240Vac
Miniature adding counter
Long service life
Flush mount with spring clip
Note: All have a count rate of 10Hz
Price per
260-634
260-640
260-656
260-662
Count Rate (Hz)
25
25
10
10
OM
S$
1+
1+
1+
1+
110·00
116·00
128·00
128·00
unit
unit
unit
unit
Stock no.
260-634
260-640
260-656
260-662
S$
6+
6+
6+
6+
102·50
108·00
119·00
119·00
S$
12+
12+
12+
12+
100·00
105·50
116·50
116·50
Predetermining Batch Counter - 5
Digit
75 mm
60 mm
65.5 mm
IP40
4 mm
5
52 x 52 mm
Power
Count Rate
Reset Type
Consumption
(Hz)
2.5 W
25
Manual
2.75 VA
10
Manual
2.75 VA
10
Manual
12 W
25
Manual; Electrical
16 VA
10
Manual; Electrical
Supply
Voltage
Manual rest, 24Vdc
24 V dc
Manual reset, 115Vac
115 V ac
Manual reset, 240Vac
240 V ac
Man + electrical reset, 24Vdc
24 V dc
Man + electrical reset, 240Vac 240 V ac
Description
Manual rest, 24Vdc
Manual reset, 115Vac
Manual reset, 240Vac
Man + electrical reset, 24Vdc
Man + electrical reset, 240Vac
Stock no.
Price
per
OM
S$
260-757
260-763
260-779
260-785
260-808
unit
unit
unit
unit
unit
1+
1+
1+
1+
1+
220·00
245·00
255·00
270·00
305·00
Stock no.
260-757
260-763
260-779
260-785
260-808
S$
6+
6+
6+
6+
6+
S$
205·00
230·00
235·00
250·00
285·00
Depth
Description
Stock no.
Knob Style
Key Style
260-814
260-820
Price per
Manu. Part No.
Manu. Part No.
Stock no.
1.150.510.013.550
1.150.510.056
348-1250
348-1272
Height
Width
Depth
Digit Height
Number Of Digits
Operating Temperature Range
1.180.110.013
1.180.110.064
1.180.110.066
OM
S$
1+
1+
74·00
81·00
Stock no.
704-0695
704-0702
704-0705
Price per
unit
unit
unit
S$
6+
53·00
6+
6+
48·80
80·00
S$
12+
52·00
12+
12+
47·80
78·50
-10 to +50 °C
50
50 ms
45 X 22 mm
Stock no.
348-1250
348-1272
Price per
unit
unit
OM
S$
1+
1+
52·50
86·00
S$
S$
20 mm
30 mm
33.7 mm
4 mm
7
-10 to +60 °C
Stock no.
440-9732
Panel Cut Out
Minimum Pulse Time (msec)
Minimum Pause Time
Supply Voltage (Vdc)
Power Consumption
Price per
unit
OM
S$
1+
46·60
45 x 22 mm
50
50 ms
24
500 mW
S$
6+
42·90
S$
12+
42·00
S$
6+
6+
69·00
75·50
S$
12+
12+
67·50
74·00
Height
Width
Depth
Digit Height
Number Of Digits
20 mm
30 mm
33.7 mm
4 mm
7
Manu. Part No.
1.710.200.012
1.710.200.013
Operating Temperature Range
Panel Cut Out
Minimum Pulse Time (msec)
Minimum Pause Time
-10 to +60 °C
27 x 14 mm
50
50 ms
Supply Voltage (Vdc)
12
24
Stock no.
440-9681
440-9704
Power Consumption (mW)
70
150
Price per
unit
unit
OM
S$
1+
1+
34·30
34·30
Stock no.
440-9681
440-9704
S$
6+
6+
32·00
32·00
S$
12+
12+
31·20
31·20
Compact Pulse - Resettable - W15.20
Miniature adding counter
Suitable for battery operation and electronic circuits
Long service life
Flush mount counter with spring clip
Note: All have a count rate of 10Hz
4
25 x 33 mm
Manual
Yes
40 x 39 mm
Maximum Count Speed (Hz)
10
18
18
24 V dc
115 V ac
230 V ac
57·50
Low power consumption: suitable for battery operation
Magnified large figures
Long service life
IP65
Note: All have a count rate of 10Hz
4-digit totaliser with manual reset
Suitable for general counting, time, performance and rate
measuring
Very high operating life; 200 x 106 pulses
Stainless steel shaft
Flush mount with 2 mounting holes
Manu. Part No. Supply Voltage
S$
1+
Shock Resistant Micro Adding K47.20
Pulse Counter with Reset - BK14
Manu. Part No.
1.180.110.013
1.180.110.064
1.180.110.066
OM
Low power consumption, suitable for battery operation
Magnified large figures
Long service life
IP65
Note: All have a count rate of 10Hz
1.710.200.012
1.710.200.013
Number Of Digits
Panel Cut Out
Reset Method
Resettable
Size
unit
Suitable for battery operation and electronic circuits
Flush mount with spring clip
Note: All have a count rate of 10Hz
Manu. Part No.
UP
Push-on connectors
4 mm
White on black
Voltage
Price per
348-1294
56
Miniature Adding Counter - W15.51
Kubler
Main Count Mode
Connection Type
Digit Height
Display Type
Inputs
45 x 22
mm
Minimum Pulse Time (msec) 50
Minimum Pause Time
50 ms
Supply Voltage
24 V dc
Power Consumption
230 mW
Stock no.
1.170.500.013
1.660.200.013
17 mm
unit
unit
28 mm
49 mm
4 mm
7
-10 to +50
°C
Manu. Part No.
For use with Hengstler predetermining counters
Can be used for devices with a 48 x 48 DIN housing
Knob style: secured via a self-retaining rotary knob
Key style: uses a cylindrical lock, 1 key supplied
79.5 mm
64 mm
Width
Depth
Digit Height
Number Of Digits
Operating Temperature
Range
Panel Cut Out
Shock and Magnetic Field Resistant
Micro Adding - K67.20
Transparent Covers
Height
Width
24 mm
Height
24 mm Operating Temperature Range
Width
48 mm Minimum Pulse Time (msec)
Depth
53.8 mm Minimum Pause Time
Digit Height
4 mm Panel Cut Out
Number Of Digits 5
Manu. Part No. Supply Voltage Power Consumption
1.150.510.013.550
24 V dc
230 mW
1.150.510.056
230 V ac
1.5 VA
Used for counting electrical impulses up to a pre-set value which is
continuously displayed below the count value, enabling comparisons
to be made
Isolated SPDT micro switch changes over when the counter reaches
the preselected count value. Change over contact rated to 220Vac
20VA
Contacts return to original position when counter is reset to zero
(manual or electrical versions available)
Pre-set value is interlocked to prevent accidental change and can be
changed when counting is in progress
Height
Width
Depth
IP Rating
Digit Height
Number Of Digits
Panel Cut Out
Description
Height
Supply Voltage
24 V dc
115 V ac
230 V ac
OM
S$
1+
1+
1+
72·00
93·00
93·00
S$
Stock no.
704-0695
704-0702
704-0705
S$
Height
Width
Depth
Digit Height
Number Of Digits
23 mm
34 mm
54.1 mm
4 mm
5
Operating Temperature Range
Panel Cut Out
Minimum Pulse Time (msec)
Minimum Pause Time
Supply Voltage
12 V dc
24 V dc
230 V ac
New products available online every week
-10 to +50 °C
31 x 20 mm
50
50 ms
Power Consumption
130 mW
230 mW
1.5 VA
Stock no.
297-0917
297-0923
297-0945
1335
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Counters, Timers & Hour Meters
Manu. Part No.
Stock no.
1.150.211.012
1.150.211.013
1.150.211.056
297-0917
297-0923
297-0945
Price per
OM
S$
1+
1+
1+
54·50
59·50
73·00
unit
unit
unit
S$
6+
6+
6+
S$
50·50
55·00
68·00
12+
12+
12+
49·20
53·50
66·50
PCB, Surface & DIN Rail Mounting
56
All units are non-resettable and are continuously rated,Counters may be damaged if connected to
inductive loads where high voltage transients may be present. Should this be unavoidable, use a
suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil
terminals.,Count rate of all products is 10Hz.
Non Reset Totalising Counters
Magnifying lens increases readout
to 4mm
Retains count during power failure
Unaffected by shock, vibration or
magnetic fields
Panel mount version has IP65 rating
331-348
331-354
331-360
331-376
297-3001
297-3039
297-3073
Price per
OM
S$
1+
1+
1+
1+
1+
1+
1+
35·70
35·70
35·70
55·00
41·00
41·00
61·00
unit
unit
unit
unit
unit
unit
unit
7
Stock no.
331-348
331-354
331-360
331-376
297-3001
297-3039
297-3073
S$
6+
6+
6+
6+
6+
6+
6+
S$
32·90
32·90
32·90
50·50
37·70
37·70
56·00
12+
12+
12+
12+
12+
12+
12+
32·20
32·20
32·20
49·60
37·00
36·90
55·00
Depth
Number Of Digits
Minimum Impulse Time
Supply Power
Voltage Consumption (mW)
12
24
Stock no.
78
155
Stock no.
312-022
312-038
Price per
19.6 mm
6
50 ms
OM
S$
1+
1+
40·90
40·90
unit
unit
185-6090
237-2363
185-6090
237-2363
OM
S$
1+
1+
40·80
54·00
unit
unit
S$
6+
6+
38·00
50·00
S$
12+
12+
37·10
49·00
Panel mounting counters with
displays designed for use in harsh
environments
Remote reset facility
Panel cut out: Rectangular - 45.2mm
x 22.4mm, Hexagonal - 36.8mm x
24.1mm, Round - 52mm dia.
Digit Height
Number Of Digits
IP Rating
Description
Rectangular Pattern
Hexagonal Pattern
Round Pattern
Rectangular Pattern
Hexagonal Pattern
5 mm
Pulse Width
6
Resettable
IP65
Maximum Input Frequency
Height (mm) Width (mm) Depth (mm) Supply Voltage (Vdc)
24
48
31.8
5 - 12
30.3
53.3
22.9
5 - 12
*
*
28.6
12 - 48
24
48
31.8
12 - 48
30.3
53.3
22.9
12 - 48
Stock no.
185-5946
185-5952
185-5968
185-5974
185-5980
Price per
OM
S$
1+
1+
1+
1+
1+
47·60
47·60
47·60
47·60
47·60
unit
unit
unit
unit
unit
1 ms
Yes
500 Hz
Stock no.
185-5946
185-5952
185-5968
185-5974
185-5980
S$
6+
6+
6+
6+
6+
44·30
44·30
44·30
44·30
44·30
S$
12+
12+
12+
12+
12+
43·30
43·30
43·30
43·30
43·30
Panel Mounting 24x48
CTR24 LCD Impulse Counter Series
S$
6+
6+
Price per
12 - 48
6
Yes
Stock no.
6 Digit LCD
Rectangular Pattern
Hexagonal Pattern
Round Pattern
Rectangular Pattern
Hexagonal Pattern
Low power counters
Display magnified by a transparent window
High shock resistant
Translucent plastic housing
PCB
31 mm
25.2 mm
Height
15.4 mm
Supply Voltage (Vdc)
Width
31 mm
Number Of Digits
Depth
19.7 mm
Resettable
Digit Height Panel Cut Out Pulse
Maximum Input
(mm)
(mm)
Width
Frequency (Hz)
5
26 x 7.6
1 ms
500
7
31.5 x 8.8
*
7
Description
Non Reset Totalising Magnified
Display
Mounting
Height
Width
PCB mounting solid state totalising counters
Wide voltage range
High shock/vibration resistance. Meets and exceeds requirements of
SAE J 1378
Totalising
Totalising Backlit
Stock no.
Panel 5Vdc
Panel 12Vdc
Panel 24Vdc
Panel 240Vac
Surface Vertical 12Vdc
Surface Vertical 24Vdc
Surface Vertical 115Vac
Totalising Counter
Description
Number Of Digits
Supply Voltage Power Consumption
Mounting Height (mm) Width (mm) Depth (mm)
5 V dc
25 mW
Panel
15
32
35.8
12 V dc
25 mW
Panel
15
32
35.8
24 V dc
100 mW
Panel
15
32
35.8
240 V ac
0.8 VA
Panel
15
32
35.8
12 V dc
25 mW
Surface Vertical
14
45
42.1
24 V dc
100 mW
Surface Vertical
14
45
42.1
115 V ac
0.8 VA
Surface Vertical
14
45
42.1
Description
PCB, Surface Mounting and Tally
S$
38·10
38·10
12+
12+
37·30
37·30
Two Module Wide Counter SK07
Compact adding counter for DIN rail mounting to DIN 46277
Highly shock proof - IP50 front panel
Data retention at power failure
Long life time (50 million counts)
Mounting
DIN Rail
Depth
Height
65 mm
Number Of Digits
Width
30 mm
Minimum Impulse Time
Manu. Part
Supply
Power
Count Rate
No.
Voltage
Consumption
(Hz)
1.132.101.033
24 V dc
250 mW
25
1.132.101.056
230 V ac
0.8 VA
10
Manu. Part No. Supply Voltage
1.132.101.033
1.132.101.056
24 V dc
230 V ac
57.1 mm
7
50 ms
Stock no.
202-1172
202-1188
Stock no.
Price
per
OM
S$
202-1172
202-1188
unit
unit
1+
1+
50·00
66·00
S$
S$
Description
5+
6+
48·10
61·50
10+
12+
44·00
60·00
Omron
Miniature Electromagnetic Totalising
Counter CSK6-YKW
Supply Voltage
24 V dc
220 V ac
1336
Supply voltage Power consumption
24 Vdc
3.5 W
220 Vac
3 VA
Stock no.
385-9681
385-9675
Price per
unit
unit
S$
1+
1+
74·00
73·00
Stock no.
385-9681
385-9675
S$
10+
10+
Price
per
OM
S$
a725-9574
unit
1+ 151·00
a725-9622
unit
1+
LCD/LED Counter/Tachometer
Counting speed (on/off 1:1)
20 CPS
15 CPS
OM
CTR24 Impulse Counter, Battery,
PNP/NPN
CTR24 Adapter 50x25
Stock no.
10·50
Hengstler Panel Mounting 24x48
General purpose miniature electro-magnetic totalising counters.
6-digit display with Manual reset
Locking mechanism for error-free operation
Unique mechanism eliminates digit misalignment during resets
Continuously rated count input
Overall dimensions (WxHxD) 72 x 31 x 80 mm
Connections via 250mm flying leads
Manu. Part no.
CSK6-YKW-DC24
CSK6-YKW-AC220
Display comprises of an 8-digit LCD with a digit height of 8 mm
The device is powered by a lithium battery
Counter inputs: solid state (4 → 30 Vdc) or voltage (10 → 260 Vac)
Reset on panel or external with inhibition option
Backlit model available
Counting directions can be selected with input
Accessories for 50 x 25 mm cut-out
Approvals: UL, CE
70·00
72·50
OM = Order Multiple a New product to range
S$
50+
50+
69·50
72·00
Units display rate per
minute of pulses received
Resettable
7mm digit height
0 to +50°C operating
temperature
IP54 rated with 45 x 22
mm panel cut out
Data retention better than
10 years, 7 years for battery types
Height
Width
24 mm
48 mm
* manufacturers information unavailable at time of printing
S$
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
Description
Manu.
Depth
Supply
Display
Part No. (mm)
Voltage
Type
0.731.101
32
Battery
LCD
0.731.201
32 12 → 24 V dc
LCD
LED
0.731.501
32 12 → 24 V dc
0.731.301
60
Battery
LCD
Manu. Part No.
Stock no.
0.731.101
0.731.201
0.731.501
0.731.301
Count Input Voltage Range
<0.7V & >5V, max 30Vdc
<0.7V & >5V, max 30Vdc
<0.7V & >5V, max 30Vdc
<3V & >12V, max 250Vac/dc
Price per
227-4815
227-4843
227-4900
227-4893
Number Of
Digits
8
8
6
8
unit
unit
unit
unit
227-4815
227-4843
227-4900
227-4893
OM
S$
S$
S$
1+
1+
1+
1+
105·00
132·00
250·00
161·00
6+ 97·50
6+ 123·00
6+ 235·00
6+ 150·00
12+ 95·50
12+ 120·00
12+ 230·00
12+ 146·50
Units display rate per minute of pulses
received
Resettable
7mm digit height
0 to +50°C operating temperature
Depth (mm)
32
60
Description
Stock no.
Tachometer
Tachometer
227-4871
227-4938
Number Of Digits
8
6
Price per
Manu. Part No.
0.731.202
0.731.502
OM
unit
unit
S$
S$
1+ 132·00
1+ 250·00
6+ 123·00
6+ 235·00
Stock no.
227-4871
227-4938
S$
Omron Panel Mounting 24x48
All units are resettable. Panel cut out is 22 x 45 with the front fascia sealed to IP65 and has an operating
temperature range of -10 to +55°C
H8GN Smart Counter/Timer (LED)
Compact unit offers a choice between a multifunction timer
or a multifunction counter
Advanced functions and simple to use menu format
High visibility dual display with set value and actual value
displayed simultaneously
PV = Present Value - SV= Set Value
Counter features:
Choice of counting inputs-up down, individual and
quadrature
4 digit batch counting and full 8 digit totalising count ability
Timer features:
Multi function timer with 6 choices of output selection (A, B, D, E, F and Z modes)
Adjustable ON/OFF duty flicker
Start, gate and reset inputs
Choice of elapsed or remaining time displayed
Approvals: UL, CSA
Height
Width
Digit Height
Depth
Supply Voltage (Vdc)
Description
Timer/Counter
RS 485 Timer/counter
24 mm
48 mm
7 mm, 3 mm
83 mm
24
Stock no.
H8GN-AD
H8GN-AD-FLK
381-0765
381-0771
Battery Powered
Backlight
Number Of Digits
Count Input Voltage Range
Price per
unit
unit
OM
S$
1+
1+
206·00
293·00
unit
unit
unit
unit
unit
unit
unit
unit
1+
1+
1+
1+
1+
1+
1+
1+
81·10
69·00
97·00
70·00
84·50
69·00
97·00
82·00
6+
6+
6+
6+
6+
6+
6+
6+
79·50
67·70
95·10
68·60
82·90
67·70
95·10
80·40
S$
12+
12+
12+
12+
12+
12+
12+
12+
No
No
4 (2 lines)
max 30Vdc
Stock no.
381-0765
381-0771
S$
6+
6+
Battery Powered
Digit Height
Function
Count Input Voltage
Supply Number Of
Range
Voltage (Vdc) Digits
Backlit, frequency, black PNP/NPN 4.5 - 30 Vdc
24
4
Backlit, frequency, beige PNP/NPN 4.5 - 30 Vdc
24
4
Backlit, counter, black
PNP/NPN 4.5 - 30 Vdc
24
8
Standard, counter, black PNP/NPN 4.5 - 30 Vdc
–
8
Multivoltage, std, counter 24 - 240 Vac; 24 - 240 Vdc
–
8
black
Standard, counter, black
No volts
–
8
Backlit, counter, beige
PNP/NPN 4.5 - 30 Vdc
24
8
Beige counter
PNP/NPN 4.5 - 30 Vdc
–
8
Multivoltage, std, counter 24 - 240 Vac; 24 - 240 Vdc
–
8
beige
Standard counter, beige
No volts
–
8
Stock no.
Price
per
348-2130
348-2168
unit
unit
OM
8 digit LCD counter for applications without
power supply (battery powered)
Very good readability due to leading zero
blanking and 8mm digit height
Slow count input e.g. for mechanical
contacts
Fast count input up to 11kHz
Easy and safe connection due to screw
terminals
Solution for any counting task-counting mode - NPN, PNP, ac, fast, slow counting
Bezels for screw mounting included
Easy to use; no programming required
Panel cut-out: 22.2mm x 45mm
Operating temperature: -10 to +60°C
IP65 Rated
Description
Manu. Part No.
Codix 130 – NPN, 7kHz or 30Hz, up or down counting selectable
6.130.012.850
Codix 130 - PNP, 12kHz / NPN, 30Hz, up or down counting
6.130.012.852
selectable
Codix 130 - High voltage count input 10-260Vac/dc, 30Hz adding
6.130.012.853
Stock no.
436-0233
a433-3758
433-3764
S$
201·90
287·20
Description
Yes
8.6 mm
Count Up
Manu. Part
No.
H7ER-NV-BH
H7ER-NV-H
H7EC-NV-BH
H7EC-NV-B
H7EC-NFV-B
H7EC-N-B
H7EC-NV-H
H7EC-NV
H7EC-NFV
H7EC-N
Price per
unit
unit
unit
OM
S$
1+ 88·00
1+ 90·00
1+ 104·50
Very good readability due to leading
zero blanking and 8mm high, 8 digit
LCD
Bezels for screw mounting included
Easy to use, no programming required
Panel cut-out: 22.2mm x 45mm
Operating temperature: -10 to +60°C
Manual and electrical reset
Mode selection (A) 99999h 59m or 99999,99h
Mode selection (B) 9999h 59m 59sec or 9999999,9sec
IP40 Rated
Backlit models require 24Vdc supply
Description
Codix 134, Optocoupler 10-260Vac/dc input, Mode Selection (A)
Codix 134, NPN 0-0.7Vdc input, Mode Selection (A), Backlit
Codix 134, Optocoupler 10-260Vac/dc input, Mode Selection (A), Backlit
Codix 135, NPN 0-0.7Vdc input, Mode Selection (B)
Codix 135, Optocoupler 10-260Vac/dc input, Mode Selection (B)
Codix 135, NPN 0-0.7Vdc input, Mode Selection (B), Backlit
Codix 135, Optocoupler 10-260Vac/dc input, Mode Selection (B), Backlit
Stock no.
Opto 10-260Vac/dc input
NPN 0-0.7Vdc input, Backlit
Opto 10-260Vac/dc input, Backlit
PNP 4-30Vdc input
Opto 10-260Vac/dc input
PNP 4-30Vdc input, Backlit
Opto 10-260Vac/dc input, Backlit
24 mm
48 mm
48.5 mm
Backlit, frequency, black
Backlit, frequency, beige
348-1840
348-1862
348-1890
348-1913
348-1856
348-1878
348-1907
348-1929
S$
77·90
66·30
93·20
67·20
81·20
66·30
93·20
78·80
56
Stock no.
436-0233
433-3758
433-3764
S$
6+
6+
6+
82·00
84·00
97·00
S$
12+
12+
12+
80·00
82·00
95·00
Hour Meter, Codix 130 series
Large totaliser display
Self powered by internal battery which can also be
replaced
Key protected switch to prevent accidental reset switch
operation
Dual operation mode
Short body of only 48.5mm
Finger touch protection
Description
S$
Kubler Panel Mounting 24x48
6.130.012.850
6.130.012.852
6.130.012.853
H7E Series Frequency/Counters (LCD)
Height
Width
Depth
Description
Backlit, counter, black
Standard, counter, black
Multivoltage, std, counter black
Standard, counter, black
Backlit, counter, beige
Beige counter
Multivoltage, std, counter beige
Standard counter, beige
Manu. Part No.
Manu. Part No.
H8GN-AD
H8GN-AD-FLK
Manu. Part No.
OM
Display Counter, Codix 130 series
12 - 24
Display Type
LCD
LED
Price
per
A Lithium battery provides power for the battery powered units, with a battery lifespan of
approximately 8 years at 20°C. Display of battery powered counters may be backlit using a 24Vdc,
50mA power source (where this option is indicated).
Position Indicator/Tachometer
Height 24 mm Supply Voltage (Vdc)
Width 48 mm
Stock no.
Stock no.
433-3821
a433-3843
436-2324
436-0306
433-3837
436-0312
436-3765
Price per
unit
unit
unit
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
1+
1+
1+
115·00
145·00
162·00
93·00
115·00
144·00
166·00
Manu. Part No.
6.134.012.853
6.134.012.860
6.134.012.863
6135012851
6.135.012.853
6135012861
6135012863
Stock no.
433-3821
433-3843
436-2324
436-0306
433-3837
436-0312
436-3765
S$
6+
6+
6+
6+
6+
6+
6+
107·00
135·00
154·00
87·00
107·00
134·00
154·00
S$
12+
12+
12+
12+
12+
12+
12+
105·00
132·00
146·00
85·00
105·00
131·00
151·00
Frequency Meter/Tachometer, Codix
136
Stock no.
348-2130
348-2168
348-1840
348-1862
348-1890
8 digit LCD counter for applications
without power supply (battery
powered)
Frequency meter to measure 1/s
Very good readability due to leading zero blanking and
8mm digit height
Bezels for screw mounting included
Easy to use, no programming required
Panel cut-out: 22.2mm x 45mm
Operating temperature: -10 to +60°C
IP65 Rated
Backlit models require 24Vdc supply
348-1913
348-1856
348-1878
348-1907
Manu. Part No.
348-1929
6.136.012.860
S$
S$
S$
1+ 141·50
1+ 105·00
6+ 138·70
6+ 102·90
12+ 135·90
12+ 100·80
Stock no.
a436-0340
Price per
unit
OM
S$
S$
S$
1+ 149·00
6+ 139·00
12+ 136·00
Many more leading brands from over 2,500 suppliers available online
1337
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Counters, Timers & Hour Meters
Codix 52U, Universal with dual
function
56
Dual Preset - Counter/tachometer/
timer
4x dual functions in one device
Operating modes: Electronic totaliser and frequency counter;
counter with 2 totalising ranges; totaliser and timer; timer with 2
time ranges
Separate multiplication and scaling factor for pulse and frequency
counter
Level of inputs: 0-2Vdc
Reset time: 5ms
Count frequency: 60kHz (can be damped to 30kHz)
Data retention via internal Eeprom
Display Type
Supply Voltage
Number Of Digits
Digit Height
Count Frequency
LED
10 → 30 V dc
6
8 mm
60 kHz/30 kHz
Stock no.
133-311
Panel Cut Out
Depth
Height
Width
IP Rating
Price per
OM
unit
Multifunction units housed in a
panel mounting case (DIN 43700)
Prescaler option - multiplier
programmable from 0.001 to 9.999
(counter and tachometer modes)
The unit may be set in any of three
modes: Counter Mode; Tachometer
Mode; Time Meter Mode
Counter mode: can be programmed for quadrature, differential, count/direction
Tachometer mode: incoming pulses are counter per gate time, which can be pre-selected. Over
speed or under speed can also be indicated
Time meter mode: programmable time ranges and decimal point
45 x 45mm panel cutout
Sensor power supply (ac versions only)
45 x 22 mm
59 mm
24 mm
48 mm
IP65
S$
S$
1+ 215·00
6+ 210·00
S$
LCD Pulse Counter - Codix 140
Direct display of the total number of pulses
Transistor output
Manual or electrical reset of the display
Fast PNP or damped NPN, control via separate inputs
Multifunctional reset key, lockable by a separate input
No programming required
Counting range: 0 ... 9999999, no decimal point
Values stored in EEPROM
Main Count Mode
Maximum Count Speed
Supply Voltage
Connection Type
Digit Height
Display Type
IP Rating
Manu. Part No.
6.140.012.300
UP
8 kHz
10 → 30 V dc
Screw terminal
8 mm
LCD
IP65
Stock no.
704-0664
Number Of Digits
Output Type
Panel Cut Out
Reset Method
Resettable
Size
Price per
OM
unit
7
NPN
22 x 45 mm
Manual, electrical
Yes
24 x 48 mm
S$
S$
S$
1+ 103·00
LED hour meters/short period timers
available with digital inputs
Decimal point selectable
Set up parameters programmable using two front keys
Panel cut-out: 22.2mm x 45mm
Supply voltage: 10-30Vdc
IP65 Rated
6.520.012.300
6.523.012.300
Stock no.
261-3103
a261-3147
Price per
OM
unit
unit
S$
S$
S$
1+ 155·00
1+ 191·00
5+ 149·00
5+ 183·00
10+ 136·50
10+ 168·00
Hengstler Panel Mounting 48x48
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and
Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count
frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact
closure.
Zero/Single Preset - Counter/
tachometer/timer
Multifunction units housed in a panel
mounting case (DIN 43700)
Prescaler option - multiplier
programmable from 0.001 to 9.999
(counter and tachometer modes)
The unit may be set in any of three
modes: Counter Mode; Tachometer
Mode; Time Meter Mode
Counter mode: can be programmed for quadrature, differential, count/direction
Tachometer mode: incoming pulses are counter per gate time, which can be pre-selected. Over
speed or under speed can also be indicated
Time meter mode: programmable time ranges and decimal point
45 x 45mm panel cutout
Sensor power supply (ac versions only)
Height
Width
Depth
Number Of Digits
Supply Voltage
12 → 24 V dc
12 → 24 V dc
230 V ac
48 mm
IP Rating
48 mm
Pulse Width
93.5 mm
Presets
6
Display Type
LCD
LED
LED
Supply Voltage
Stock no.
12 → 24 V dc
12 → 24 V dc
230 V ac
200-0995
200-1083
200-1106
Price per
unit
unit
unit
IP65
100ms @ 5 kHz
1
Digit Height (mm)
9
7.6
7.6
OM
S$
1+
1+
1+
345·00
400·00
485·00
Stock no.
200-0995
200-1083
200-1106
S$
6+
6+
6+
320·00
370·00
450·00
2
48 mm
48 mm
93.5 mm
OM = Order Multiple a New product to range
6
IP65
100ms @ 5 kHz
Digit Height (mm)
9
9
7.6
7.6
Supply
Voltage
Display
Type
12 → 24 V dc
230 V ac
12 → 24 V dc
230 V ac
LCD
LCD
LED
LED
Stock no.
200-1027
200-1033
a200-1128
a200-1134
Price
per
OM
S$
unit
unit
unit
unit
1+
1+
1+
1+
375·00
445·00
500·00
506·00
Stock no.
200-1027
200-1033
200-1128
200-1134
S$
6+
6+
6+
6+
S$
350·00
415·00
470·00
471·00
S$
Universally applicable as tachometer, timer, shift-counter and batchcounter
Simplified handling
Separate preset adjustment (signal 1, trail preset, range or limit
value)
Versatile and easy to program, 4 keys to directly address presets,
prescaler and seperate totalizer
Clearly readable display with large digits
Display and preset range: - 999 999 up to + 999 999
Alarm signal: display flashes when preset 0, 1 or 2 are active
Input frequency up to 60 kHz
Relay outputs: 250Vac / 30Vdc / 5A
Easy installation due to pluggable terminals
3 Presets
Typical applications: Time controlling, position indication, batch counting, cutting to length,
rotation speed controlling
Main Count Mode
Maximum Count
Speed
Presets
Connection Type
Digit Height
IP Rating
Inputs
Manu. Part No.
0 772 101
0 772 102
0 772 111
0 772 112
0 772 121
0 772 122
0 772 131
0 772 132
UP, DN, CUMUL, IND, DIR, PH, PH2, Number Of Digits
PH4, BATCH, Tacho, Hour
60 kHz
Panel Cut Out
6
3
Plug in terminals
9.3 mm, 7.2 mm
IP65
NPN/PNP
Manual, Auto, External
Yes
48 x 48 x 118 mm
LCD Reflective
Manu. Part No.
0 772 101
0 772 102
0 772 111
0 772 112
0 772 121
0 772 122
0 772 131
0 772 132
Reset Method
Resettable
Size
Display Type
Supply Voltage
12 → 24 V dc
12 → 24 V dc
24 V ac
24 V ac
115 V ac
115 V ac
230 V ac
230 V ac
Stock no.
704-3120
704-3124
704-3133
704-3136
704-3130
704-3149
704-3142
704-3146
45 x 45 mm
Price per
Output Type
1 x SPDT relay
2 x SPDT relay
1 x SPDT relay
2 x SPDT relay
1 x SPDT relay
2 x SPDT relay
1 x SPDT relay
2 x SPDT relay
OM
S$
1+
1+
1+
1+
1+
1+
1+
1+
325·00
340·00
340·00
360·00
340·00
360·00
340·00
360·00
unit
unit
unit
unit
unit
unit
unit
unit
S$
Preset Counter - Signo 721.2
Single or dual preset counter
IP65 rated
Counting Operating modes -one channel add or subtract; Direction mode;
differential mode (add/sub); totalizing mode (add/add); phase
discriminator
Programmable reset back to 0 or back to preset 2 (externally resettable)
Overwriting of counter reading is possible
Keylock can be absolute or separately set to allow correction and/or
prescaler
Units have a maximum count frequency of either 50kHz or 30Hz depending on setting
Approvals: UL, CSA
Series
Maximum Count Speed
1338
Number Of Digits
IP Rating
Pulse Width
Multifunctional Counter - tico 772
Display Counter Codix 520 series
Manu. Part No.
Presets
Height
Width
Depth
Display Type
LCD
LCD
LED
LED
721
50 kHz
Inputs
Connection Type
NPN/PNP
Screw Terminal
Stock no.
704-3120
704-3124
704-3133
704-3136
704-3130
704-3149
704-3142
704-3146
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
6 Digit Multifunction, LCD Display
Function
Number Of Digits
Multifunction
5
Description
Stock no.
0721201 1 Preset 12-24Vdc
0721205 2 Preset 12-24Vdc
546-795
546-806
Size
Price per
unit
unit
48 x 48 x 108 mm
OM
S$
1+
1+
610·00
610·00
S$
S$
Crouzet Panel Mounting 24x48
Counter, Tachometer and Timer all in one device
Can be used as a preset counter, batch counter or totaliser
2 line 2 x 6 digits LCD display
Direct input of presets via the front keys or the Teach-In input
3 predefined settings for the most common parameter
settings
Tracking presets eliminate the need for reprogramming of
the pre-signal
4 stage RESET modes and 3 stage key lockout
56
CTR24 Series LCD Hour Counters
The display consists of an 8 digit
LCD with a digit height of 8 mm
Integrated module for voltage
inputs 10 → 260 Vac
4 timing ranges available including 99.999.99 hrs,
99.999.59 hrs, 999.999.9 s, 9.999 hrs 59 min 59 s
Powered by a lithium battery which has a service life of
8 years
Reset on panel or external (via terminals) with inhibition
option
Backlit model available (orange blacklit LCD)
Accessories available for 50 x 25 mm cut-out
Approvals: UL, CE
Product Index
Main Count Mode
Totaliser, Hours Run
Hour Counter
Description
CTR24 Time Counter, Battery, PNP
Input
CTR24 Time Counter, Battery, NPN
Input
CTR24 Time Counter, Battery 10260Vac/dc
Stock no.
Product Index
Totaliser, Tachometer, Hours Run
Number Of Digits
6
Main Count Mode
UP, DIR, CUMUL, IND, PH, PH2, PH4, Tacho, Hour Operating Temperature Range -20 → +65 °C
Maximum Count Speed60 kHz
Output Type
Relay
Backlight
No
Panel Cut Out
45 x 45 mm
Connection Type
Plug in screw terminal
Resettable
Yes
Display Type
LCD
Size
48 x 48 x 98 mm
IP Rating
IP65
Manu. Part No.
Presets
Supply Voltage
Series
Stock no.
Codix 923
669-9322
6.923.0100.300
1
10 → 30 V dc
Codix 923
669-9325
6.923.0100.000
1
90 → 260 V ac
6.924.0100.000
2
90 → 260 V ac
Codix 924
669-9334
Supply Voltage
1 lithium battery - Life 8 years
Price
per
S$
OM
a725-9596
unit
1+ 151·00
a725-9599
unit
1+ 151·00
a725-9593
unit
1+ 180·00
S$
Description
S$
Present value display characters can be switched between red, green
and orange (except H7CX-A11 models)
Increased character height and display segments (10mm)
Simple operation using UP/DOWN keys for digits
Reliable - setting Upper Limit restricts the set time and helps prevent
incorrect settings
Service Life Notification - The number of times that the control output
turns ON is counted and an alarm is displayed when a preset count is
exceeded
Maximum Count Speed
5 kHz
Series
Presets
1
Height
Count Inputs
No Voltage / Voltage selectable
Width
Reset Type
Manual; Auto
Description Supply Voltage Connection Output Type
Display Type
Number Of
Type
Digits
Totaliser
12-24 Vac/dc
11 pin
Relay SPDT Red, green, 1 stage
6
Totaliser
12-24 Vac/dc
11 pin
Transistor Red, green, 1 stage
6
Totaliser, 12-24 Vac/dc
Screw
2-stage
Red, orange, green,
6
Tachometer
terminal
Transistor
2 stage
Totaliser, 12-24 Vac/dc
Screw
Relay SPDT + Red, orange, green,
6
Tachometer
terminal
transistor
2 stage
Totaliser
100-240 V ac
Screw
Relay SPDT Red, orange, green,
4
terminal
1 stage
Totaliser
100-240 V ac
11 pin
Relay SPDT Red, green, 1 stage
6
Totaliser,
100-240 V ac
Screw
Relay SPDT + Red, orange, green,
6
Tachometer
terminal
transistor
2 stage
Totaliser,
100-240 V ac
Screw
Relay SPDT + Red, orange, green,
6
Tachometer
terminal
SPNO
2 stage
Manu. Part No.
Main Count Mode
H7CX-A11D1-N
UP, DN, CUMUL, IND, DIR, PH, PH2, PH4
H7CX-A11SD1-N
UP, DN, CUMUL, IND, DIR, PH, PH2, PH4
H7CX-AUSD1-N
UP, DN, CUMUL, IND, DIR, PH, PH2, PH4, BATCH, Tacho
H7CX-AUD1-N
UP, DN, CUMUL, IND, DIR, PH, PH2, PH4, BATCH, Tacho
H7CX-A4-N
UP, DN, CUMUL, IND, DIR, PH, PH2, PH4
H7CX-A11-N
UP, DN, CUMUL, IND, DIR, PH, PH2, PH4
H7CX-AU-N
UP, DN, CUMUL, IND, DIR, PH, PH2, PH4, BATCH, Tacho
H7CX-AW-N
UP, DN, CUMUL, IND, DIR, PH, PH2, PH4, BATCH, Tacho
H7CX-A11D1-N Counter
H7CX-A11SD1-N Counter
H7CX-AUSD1-N Counter/Tacho
H7CX-AUD1-N Counter/Tacho
H7CX-A4-N Counter
H7CX-A11-N Counter
H7CX-AU-N Counter/Tacho
H7CX-AW-N Counter/Tacho
Price
per
OM
S$
687-6137
687-6147
687-6125
687-6140
687-6119
687-6134
687-6131
687-6143
unit
unit
unit
unit
unit
unit
unit
unit
1+
1+
1+
1+
1+
1+
1+
1+
235·00
245·00
319·00
319·00
245·00
255·00
297·00
280·00
669-9322
669-9325
669-9334
unit
unit
unit
OM
S$
1+
1+
1+
240·00
270·00
295·00
S$
6+
6+
6+
S$
225·00
255·00
275·00
Counter, Tachometer and Timer all in one device
Can be used as a preset counter, batch counter or totaliser
2 line 2 x 6 digits LCD multicolour display for improved
differentiation of the two values
Direct input of presets via the front keys or the Teach-In input
3 predefined settings for the most common parameter settings
Tracking presets eliminate the need for reprogramming of the
pre-signal
4 stage RESET modes and 3 stage key lockout
Ultra Compact Multifunction Counter /
Tachometer - Series H7CX
Stock no.
1 preset, 10-30Vdc
1 preset, 90-260Vac
2 preset, 90-260Vac
Price per
6 Digit Multifunction, Multicolour
LCD Display
Omron Panel Mounting 48x48
Description
Stock no.
S$
H7CX
48 mm
48 mm
Stock no.
687-6137
687-6147
687-6125
687-6140
687-6119
687-6134
687-6131
687-6143
Stock no.
687-6137
687-6147
687-6125
687-6140
687-6119
687-6134
687-6131
687-6143
S$
Kübler Panel Mounting 48x48
Range of Resettable Counters / Timers / Rate Meters. All have 45 x 45mm panel cut out and are sealed
to IP65 (front fascia). Data retention greater than 10 years.
Product Index
Totaliser, Tachometer, Hours Run
Operating Temperature Range -20 → +65 °C
Main Count Mode
UP, DIR, CUMUL, IND, PH, PH2, PH4, Tacho, Hour Output Type
Relay
Maximum Count Speed60 kHz
Panel Cut Out
45 x 45 mm
Backlight
Yes
Resettable
Yes
Connection Type
Plug-in screw terminal
Size
48 x 48 x 98 mm
Display Type
LCD
Presets
1
IP Rating
IP65
Series
Codix 923
Number Of Digits
6
Manu. Part No.
Supply Voltage
Stock no.
669-9316
6.923.0103.300
10 → 30 V dc
6.923.0103.000
90 → 260 V ac
669-9312
Description
Stock no.
Single preset, 10-30Vdc
Single preset, 90-260Vac
669-9316
669-9312
Price per
unit
unit
OM
S$
1+
1+
270·00
300·00
S$
6+
6+
S$
255·00
285·00
6 Digit LED – Single Preset
Electronic preset counter with sign and scale factor
Programmable as a pulse counter, a frequency
meter/speed indicator or a time counter/operating
time counter
Programmable parameters: operating mode, polarity of inputs, input
mode, scaling factor, decimal point, output signals permanent or timed,
gate time when programmed as a rate meter, resolution when
programmed as a timer
Simple use and preselection setting by means of 4 keys
Scale factor setting between 0,0001 and 99,9999 allowing an optimum
matching of the measuring signal
In time counter mode, resolution up to 1ms
Two input channels for up/down, difference and quadrature, quadrature
x 2 (encoders)
Relay output 3A, N/C or N/O
Digit Height
Pulse Width
Manu. Part
No.
8 mm
5 ms
Maximum Input Frequency
Supply Voltage
Stock no.
6.716.010.300 10 → 30 V dc
6.716.010.000 90 → 250 V ac
a309-6105
309-6111
0.03/20 Hz
Price
per
OM
S$
unit
unit
1+
1+
296·00
300·00
S$
6+
6+
S$
272·00
280·00
Single Preset Counter
Lithium battery powered presettable pulse counter
Display shows count value, preset value and switching condition of
relay
Comfortable programming of preset: one pushbutton is attributed
to each digit
Low battery indication, battery is user exchangable
Approvals: UL recognised component for Canada and US
Backlight
Digit Height
Number Of Digits
No
7 mm, 4.5 mm
6 (2 lines)
Stock no.
243-639
Price per
unit
Pulse Width
Maximum Input Frequency
50 ms
25 Hz
OM
S$
S$
S$
1+ 200·00
5+ 192·00
10+ 176·00
Visit our website for additional price information and exciting promotions
1339
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Counters, Timers & Hour Meters
quadrature input (also with pulse doubling) and quadrupaling
Set point multiplier and division
Panel Mounting 48x48 - IVO
LED Dual Preset
Up/down counters with NPN/PNP or AC logic inputs
Resettable
Front fascia sealed to IP54
Greater than 10 year data retention
56
Width
Height
Depth
Supply Current
Display Type
48 mm
48 mm
107 mm
60 mA
LED
Digit Height
Number Of Digits
Panel Cut Out
Operating Temperature Range
Supply Voltage
Stock no.
115/230
253-4511
Price per
unit
8 mm
5
45 x 45 mm
0 to +50 °C
OM
S$
1+
450·00
S$
S$
Panel Mounting 72x36
All units have a panel cut out of 68 x 33mm and have resettable displays.
Dual Counter & Indicator Meter CUB 5
Red Lion
Count speeds up to 20kHz
Programmable scaling for count/rate
Bi-directional counting, up/down control
Flexible input configurations
Anti-coincidence counting (add/add & add/sub)
Resettable display
IP65 sealed front bezel
68 x 33mm panel cut out
Height
39 mm
Width
75 mm
Depth
43 mm
Description
Reflective LCD
Red or Green, Backlit LED
Reflective LCD
Red or Green, Backlit LED
492-7325
492-7319
Price per
unit
unit
48 mm
96 mm
67 mm
14 mm
Number Of Digits
IP Rating
Operating Temperature Range
Maximum Input Frequency
Supply Voltage
Stock no.
90 → 260 V ac
10 → 30 V dc
348-1418
348-1424
Price per
unit
unit
6
IP65
-10 to +50 °C
30 kHz
OM
S$
1+
1+
490·00
495·00
Stock no.
492-7325
492-7319
OM
S$
S$
1+
1+
205·00
255·00
6+ 192·50
6+ 240·00
S$
Height
Width
Depth
Supply Voltage (Vdc)
Display Type
Digit Height
24 mm
48 mm
65.5 mm
10 - 30
LED
8 mm
Number Of Digits
IP Rating
Panel Cut Out
Data Retention
Resettable
Count Frequency
6
IP65
45 x 22 mm
10 (year)
Yes
10kHz / 30 Hz
Hengstler Panel Mounting 96x48
Position Indicator
Style
12 → 24 V dc
115 / 230 V ac
a269-7842
a269-7858
Number Of Digits
Operating Temperature Range
Panel Cut Out
Reset Method
Resettable
Series
Size
Inputs
NPN/PNP, DC Voltage
NPN/PNP, AC Voltage
Price per
unit
unit
OM
S$
1+
1+
571·00
658·00
6
0 to +50 °C
92 x 45 mm
Manual, Electrical
Yes
Signo 727
48 x 96 x 110 mm
Stock no.
269-7842
269-7858
S$
IP Rating
Operating Temperature Range
Maximum Input Frequency
Supply Voltage (Vdc)
348-1373
Price per
unit
1+ 220·00
1+ 279·00
6+ 200·00
6+ 260·00
S$
S$
1+
350·00
Supply Voltage (Vac)
Height
Width
Depth
Digit Height
Number Of Digits
100-240
36 mm
72 mm
66 mm
15 mm
6
Manu. Part No.
Panel Cut Out
Data Retention
Battery Powered
Backlight
Count Frequency
Stock no.
H7HP-A
204-5077
68 x 33 mm
EEPROM (year)
No
Yes
30 Hz - 5 kHz
Price per
unit
OM
S$
S$
S$
1+ 248·00
High count speed, numerous programming options
Separate inputs for position and frequency display
Position display with various count modes, tachometer with
time-base (gate time) or time-interval (process time) with an
accuracy>0.1% (HRA time)
Scaling factor 0.0001 to 99.9999
Division factor 0.0001 to 99.9999
Level of inputs: 0-2Vdc
Data retention via internal Eeprom
IP65
-10 → +50 °C
30 kHz
10 → 30
OM
Hour meter or totaliser (up/down count)
Large display
NPN/PNP selectable by DIP switch
External and manual resets
Codix 52P Position Display and
Frequency Meter
S$
6+
325·00
Timer / Rate Meter / Counter - Codix
544
S$
Display Type
Supply Voltage (Vdc)
Digit Height
Number Of Digits
Panel Cut Out
Resettable
Stock no.
133-305
LED
10-30
8 mm
6
45 x 22 mm
Yes
Price per
unit
Easy and secure programming via 2 keys
Input pulse shape variable (Schmitt Trigger characteristics)
Data retention greater than 10 years
Totaliser and position indicator mode:
Overflow condition indicated by displaying count value with
leading zeros
Counting with direction input, differential counting, counting with
1340
S$
Panel Mounting 96 x 48
Functions as a totaliser with digital inputs
Input pulse shape variable (Schmitt trigger)
Overflow condition displayed
Reset can be disabled
Data retention greater than 10 years
Panel cut out: 92 x 45mm
Stock no.
unit
unit
S$
S$
Digital Counter - Codix 540
48 mm
96 mm
67 mm
14 mm
6
OM
Stock no.
297-7823
297-7845
H7HP Hour Meter & Totaliser, IP66
Kubler Panel Mounting 96x48
Height
Width
Depth
Digit Height
Number Of Digits
297-7823
a297-7845
Price per
Style
522
524
Panel Mounting 72x36
Totaliser
PH, PH2, PH4
40 kHz
Plug-in Terminal
14 mm
LED
IP54
Stock no.
Stock no.
522
524
Position indicator with membrane
keypad
Chain value or absolute value
indication
Counts through zero
Max input frequency: 40kHz
Resettable LED display
Supply Voltage
S$
Decimal point selectable
All set up parameters are programmable
via two front keys
Type
Tachometer, Frequency Meter
Totaliser, Position Indicator, Frequency Meter, Tachometer, Time Meter
Product Index
Main Count Mode
Maximum Count Speed
Connection Type
Digit Height
Display Type
IP Rating
Supply Voltage
12 → 24 V dc
115 / 230 V ac
S$
Digital Single/Multifunction LED
Display
9-28
11.7 mm
8
Supply Current (mA)
15
60
Stock no.
Height
Width
Depth
Digit Height
Panel Mounting 24x48
Supply Voltage (Vdc)
Digit Height
Number Of Digits
Description
Frequency meter and tachometer mode:
Indication in 1/s or 1/min (programmable)
Operating principle: combination & gate measurement and period duration measurement
Hour meter and short time meter mode:
Active counting indicated by flashing lowest digits decimal point
Timing in s, min, h or h, min, s, (programmable) decimal point fixes the resolution up to 1 ms
SET key reset the counter to zero (can be displayed in set up)
Operating mode: hour meter or short time meter (depending on resolution)
Set point for time counter
Resettable
Panel cut out: 92 x 45mm
OM = Order Multiple a New product to range
* manufacturers information unavailable at time of printing
Count Frequency
Depth
Height
Width
IP Rating
OM
30 kHz
59 mm
24 mm
48 mm
IP65
S$
S$
1+ 215·00
6+ 210·00
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
Mains Powered Tachometer / Rate Meter
Signal input selection of all popular motion sensing devices
including magnetic pick-ups (with sensitivity adjustment),
optical and other proximity switches (NPN, PNP or 2 wire
NAMUR), shaft encoders, Hall effect sensors, turbine or pulse
type flow meters
Pulse train frequency measurement and control facility for
inverter drives, shaft encoders, mains frequency monitoring,
etc.
Scaling facilities for input pulse dividing / multiplying
Resettable LED display
Width
Depth
Supply Voltage (Vac)
Digit Height
Number Of Digits
Stock no.
260-094
96 mm
140 mm
110 - 240
11 mm
5
Printed Circuit Board Mounting
Hour Meter/Counter
0 to +45 °C
200 kHz
48 mm
91.5 x 42.5 mm
Operating Temperature Range
Count Frequency
Height
Panel Cut Out
Price per
unit
OM
S$
1+
730·00
Internal electronic circuit generates pulses every 36s for metering
Metering may be interrupted without losing unrecorded time (since
last pulse)
Operating temperature -10 to +60°C
IP65 environmental rating
5 - 12 Vdc operation; may be operated at higher supply voltages by
adding external components
S$
Height
Width
Supply Voltage (Vdc)
Supply Current
S$
Signal input selection of magnetic pickups (with sensitivity
adjustment), optical and other proximity switches (NPN, PNP or
2 wire NAMUR), shaft encoders, Hall effect sensors, turbine or
pulse type flow meters
Indication or sensor active, over and under range. For under
range (> pulses / min.) a choice of zero display, flashing display
or last reading held is switch selectable
Input pulse divider for division in the range 1-999. This permits
the desired engineering units to be displayed
Fixed multiplier used in the tachometer mode for X1, X10 or X100 multiplication of pulses after they
have passed through the divider
Resettable LED display
Stock no.
342-073
48 mm
96 mm
107 mm
110 - 240
11 mm
Number Of Digits
Panel Cut Out
Operating Temperature Range
Count Frequency
Price per
unit
OM
S$
1+
700·00
5
91.5 x 42.5 mm
0 → +45 °C
200 kHz
S$
S$
8 Digit LED Display
Designed for sequential measurements
Pulse variation can be programmed from
0.0001 to 9999.99
Sensor logic can be programmed
Frequencies processed up to 40 kHz
Measurement according to measurement of length of period
Resettable LED display
Height
Width
Depth
Digit Height
IP Rating
Panel Cut Out
Operating Temperature Range
Description
TA200, Tachometer
TA200, Tachometer
TA201, Tachometer, ratemeter
TA202, Threshold tachometer, ratemeter
Supply Voltage
115 / 230 V ac
24 V dc
24 V dc
115 / 230 V ac
Stock no.
176-3853
176-3869
a176-3897
176-4519
48 mm
98 mm
129 mm
14 mm
IP65
92 x 45 mm
0 to +50 °C
Supply Voltage
115 / 230 V ac
24 V dc
24 V dc
115 / 230 V ac
Price per
unit
unit
unit
unit
Manu. Part No.
Stock no.
0 633 604
Universal Mains Powered Tachometer / Rate Meter
Height
Width
Depth
Supply Voltage (Vac)
Digit Height
31 mm
25.2 mm
5 - 12
25 mA (max)
331-512
Digit Height
Number Of Digits
Resettable
Price per
3.5 mm
7
No
OM
S$
1+
74·00
unit
56
S$
6+
69·00
S$
12+
67·50
Panel Mounting - Compact DIN
IP65 Rated - H37
Available in ac and dc versions
Synchronous motor driven for ac, and stepping motor for dc
Held in position with a spring clip
Non resettable
Height
Width
Depth
Digit Height
IP Rating
Operating Temperature Range
Panel Cut Out
Motor Driven
Supply Voltage
Power Consumption
500 mW
10 → 30 V dc
100 → 130 V ac
0.6 VA
1.2 VA
187 → 264 V ac
Supply Voltage
Stock no.
10 → 30 V dc
100 → 130 V ac
187 → 264 V ac
297-1027
297-1049
297-1055
25 mm
48 mm
48.5 mm
4 mm
IP65
-15 to +50 °C
22 x 45 mm
Yes
Count Capacity (h)
999999.99
99999.99
99999.99
Price per
Number Of Digits
8
7
7
OM
S$
1+
1+
1+
90·00
49·50
51·00
unit
unit
unit
Stock no.
297-1027
297-1049
297-1055
S$
6+
6+
6+
83·50
46·10
47·50
6+
6+
59·00
58·00
S$
12+
12+
12+
82·00
45·10
46·40
12+
12+
58·00
57·00
IP67 Rated, Panel/Base Mount - HK47
Non-resettable - internal circuit generates pulses every
36s for metering
Decimal digits red, others white
Picture shows base mount only
Count Frequency (kHz)
40
40
10 - 40
10 - 40
OM
S$
1+
1+
1+
1+
390·00
485·00
436·00
930·00
S$
Stock no.
176-3853
176-3869
176-3897
176-4519
S$
Supply Voltage (Vdc)
Digit Height
Number Of Digits
Power Consumption
IP Rating
Operating Temperature Range
Count Capacity
4.5 - 35
4 mm
7
135 mW
IP66
-10 → +60
°C
99999.99 h
Description Height Width Depth Panel Cut
(mm) (mm) (mm) Out (mm)
Panel Mount 15
32
32.7
30 x 13
Base Mount
14
29
41
*
Programmable Count Controller - Divider
Unit
Description
Stock no.
Panel Mount
Base Mount
442-8345
442-8351
Price per
unit
unit
Stock no.
442-8345
442-8351
OM
S$
1+
1+
63·50
62·50
S$
S$
Progammable count controller for use in applications which
utilise pulse or electronic sensor techniques. Typical applications
include; batch control, flow meter control and pre scaling, preset
conveyor routing, automatic machine lubrication control,
metering pump control, PLC input prescaling and pulse control
sequencing.
Provides an output pulse after a preset number of input pulses
Input/Output divide ratio 1 to 4095
Output pulse adjustable between 0.1 and 5 seconds
Maximum input pulse rate 100Hz ( can be set to 5Khz)
Built in 12 and 24 volt power supplies to provide power to
sensors, displays etc
NPN output for driving LCD counters etc
DIN rail or surface mounting
Supplied with: full instructions.
Stock no.
341-480
Price per
unit
OM
S$
1+
325·00
S$
6+
300·00
S$
www.rssingapore.com
New products available online every week
1341
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Counters, Timers & Hour Meters
Flush Mount DIN Standard - H57
HK17 Series
Magnified lens
Operated by ac synchronous motor and dc stepper motor
Flush mounting with clamp
33 x 22mm cut out
Applications include general counting, service interval for
measurement systems (respiratory ventilators, oxygen machines,
dialysis machines) and small appliances
Non resettable
High shock resistance
Data retention when breaking of power supply
Approvals: UL recognised component for Canada and US
56
Height
Width
48 mm
48 mm
Depth
Digit Height
Power Consumption
35 mm
4 mm
2 VA
IP Rating
Operating Temperature
Range
Panel Cut Out
Motor Driven
Number Of Digits
Height
26 mm
Digit Height
3.8 x 1.7 mm
Width
37 mm
Motor Driven
Yes
Depth
68.8 mm
Number Of Digits
8
Supply Voltage Power Consumption Count Capacity (h) Stock no.
500 mW
999999.99
309-6060
10 → 30 V dc
1.2 VA
99999.99
309-6098
187 → 264 V ac
IP54
-15 to +50 °C
45 x 45 mm
Yes
8
Count Capacity (h)
999999.99
99999.99
99999.99
Supply Voltage
10 → 30 V dc
100 → 130 V ac
187 → 264 V ac
Supply Voltage
Stock no.
10 → 30 V dc
100 → 130 V ac
187 → 264 V ac
297-1156
297-1162
297-1178
Price per
unit
unit
unit
OM
S$
1+
1+
1+
77·00
41·10
43·30
Stock no.
297-1156
297-1162
297-1178
S$
15+
15+
15+
71·50
38·30
40·30
S$
25+
25+
25+
70·00
37·40
39·40
Combination Time and Pulse Meter,
IP52 Rated - H77
Counts on/off timing and total hours
Synchronous motor for ac versions, stepper motor for dc versions
Voltage frequency time control for ac versions, quartz controller for
dc versions
Approvals: UL / C-UL recognised
Height
Width
Depth
Digit Height
IP Rating
48 mm
48 mm
30 mm
4 x 1.7 mm
IP52
Panel Cut Out
Motor Driven
Operating Temperature Range
Number Of Digits
Supply Voltage
10 → 30 V dc
187 → 264 V ac
Supply Voltage
Stock no.
10 → 30 V dc
187 → 264 V ac
297-1061
202-1324
Price per
Count Capacity (h)
999999.99
99999.99
OM
unit
unit
S$
1+ 100·00
1+ 86·00
Stock no.
297-1061
202-1324
S$
6+
6+
93·00
82·50
12+
12+
91·00
76·00
Low noise, synchronous motor driven hour meters
Red coloured decimal digits
Visual indication that motor is running
Supplied with adapter to fit 45 x 45 cut-out
Number Of Digits
Power Consumption
Count Capacity
Motor Driven
Supply Voltage (V ac)
Stock no.
115
230
260-066
260-072
7
750 mW Max
99999.99 h
Yes
Price per
unit
unit
OM
S$
1+
1+
56·50
53·50
S$
6+
6+
52·50
49·80
S$
12+
12+
51·50
48·70
Magnified lenses
Operated by ac synchronous motor and dc stepper motor
Clamp mounting
50 x 25mm cut out
Height
28 mm
Digit Height
4.5 mm
Width
53 mm
Number Of Digits
6
Depth
70 mm
Motor Driven
Yes
Supply Voltage Power Consumption Count Capacity (h) Stock no.
10 → 30 V dc
500 mW
99999.9
307-6814
187 → 264 V ac
1.2 VA
99999.99
307-6836
Stock no.
307-6814
307-6836
Price per
unit
unit
OM
S$
S$
S$
1+ 128·50
1+ 100·50
6+ 119·50
6+ 93·50
12+ 117·00
12+ 91·50
Manu. Part
No.
999999 h
2x6
No
Screw terminal
Voltage
4 mm
Supply Voltage (V
ac)
3.563.201.074 115
Stock no.
440-9669
1342
Price per
unit
Number Of Digits
Power Consumption
Count Capacity
Motor Driven
S$
6+
6+
70·50
40·60
S$
12+
12+
69·00
39·80
IP Rating
Panel Cut Out
Size
Supply Voltage
Accuracy
Type
Stock no.
Price
per
704-0686
unit
OM
IP65
45 x 45 mm
48 x 48 mm
115 V ac
± 2 % (hour meter)
Standard
S$
S$
S$
1+ 220·00
Round Facia - HR76
Waterproof; Rated at IP65
Quartz controlled drive of the stepper
motor
Supply Voltage
10 → 80 V dc
115 V ac
230 V ac
10 → 80 V dc
115 V ac
230 V ac
Dia. (mm)
58.7
58.7
58.7
71.1
71.1
71.1
297-1128
297-1134
297-1140
297-1099
297-1106
297-1112
7
135 mW
99999.99 h
No
S$
1+
56·50
Price per
unit
unit
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
1+
1+
64·50
64·50
64·50
64·50
68·00
54·00
Stock no.
297-1128
297-1134
297-1140
297-1099
297-1106
297-1112
S$
6+
6+
6+
6+
6+
6+
60·00
60·00
60·00
60·00
63·00
50·00
S$
12+
12+
12+
12+
12+
12+
58·50
58·50
58·50
58·50
62·00
49·20
Hour meter with run indicator
Efficiently monitors and plans maintenance
intervals
Run indicator displays status of the meter, whilst count value is
read at a glance
Large optical figures, white and red on black
Suitable for any mounting position
Without reset and tamper-proof
High shock and impact resistance
7
No
Screw terminal
Voltage
Supply Voltage
10 → 80 V dc
100 → 130 V ac
187 → 264 V ac
OM
Power Consumption
0.08 W at 12 Vdc; 0.7 W at 48 Vdc
0.4 VA
0.4 VA
0.08 W at 12 Vdc; 0.7 W at 48 Vdc
0.4 VA
0.4 VA
Stock no.
Number Of Digits
Resettable
Connection Type
Count Inputs
Magnified large figures
Flush mounting (snap-in spring clip)
Long service life
Suitable for battery operation
27 x 14mm cut out
4.5 - 35
20 mm
30 mm
33.7 mm
4 mm
76·00
43·70
Round Hour Meter - HR 47
Shock Resistant Micro - K47
Supply Voltage (Vdc)
Height
Width
Depth
Digit Height
S$
1+
1+
Metering of hours run and energy consumption in one compact
device
Shows both values in parallel
Can also be read if no voltage present
2 x 6-digit easy-to-read display, white and red on black
LED indicates power on and blinks when energy is being measured
Tamper-proof fixed installation without reset
High measuring accuracy
Wide temperature range: -20 to +55°C
Note: The MID version (stock number 704-0682) has been developed in
accordance with the relevant European Measuring Instruments Directive,
known as the MID. As a result it meets the legal requirements for the accuracy of the instrument and
carries the seal of approval for official energy billing. It also meets all the requirements of the German
Weights & Measures Act.
Ø59mm, 10-80 Vdc
Ø59mm, 115 Vac
Ø59mm, 230 Vac
Ø71mm, 10-80 Vdc
Ø71mm, 115 Vac
Ø71mm, 230 Vac
Resettable - HB26
10 → 30 V dc
187 → 264 V ac
OM
Energy and Time Counter - HW 66
Description
Supply Voltage
Price per
unit
unit
Depth
49.3 mm Count Capacity 99999.9 h
Digit Height
3.5 mm Motor Driven Yes
Number Of Digits 6
Multi Mount
24 mm
48 mm
43 mm
5 mm
309-6060
309-6098
S$
Panel Mounting
Height
Width
Depth
Digit Height
Stock no.
10 → 30 V dc
187 → 264 V ac
Count Capacity
Number Of Digits
Resettable
Connection Type
Count Inputs
Digit Height
45 x 45 mm
Yes
-15 to +50 °C
8, 7 (2 lines)
Power Consumption
1W
3 VA
Supply Voltage
S$
6+
52·00
OM = Order Multiple a New product to range
S$
12+
51·00
Digit Height
IP Rating
Panel Cut Out
Size
Count Capacity (h)
999999,9
99999,99
99999,99
Manu. Part No. Supply Voltage
Stock no.
10 → 80 V dc
100 → 130 V ac
187 → 264 V ac
a704-0676
704-0670
a704-0689
3.474.911.373
3.474.901.084
3.474.901.075
4 mm
IP65
Ø 50.5 mm
Ø 58 mm
Price per
unit
unit
unit
* manufacturers information unavailable at time of printing
Accuracy (%)
0.002
0.02
0.02
OM
S$
1+
1+
1+
51·10
38·00
38·00
S$
Stock no.
704-0676
704-0670
704-0689
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
Motor Driven
Single Module Wide
Low noise
Decimal digits are white, whilst the others are red
Supplied with panel clip and bezel for mounting through
50mm dia. hole
46 x 46mm cut out
Height
48 mm
Digit Height
Width
48 mm
Number Of Digits
Depth
51 mm
Motor Driven
Supply
Power
Count Capacity
Voltage
Consumption
(h)
12 → 48 V dc 20 mW at 12 V
999999
24 V ac (50 Hz)
1 VA
99999
115 V ac (50
1 VA
99999
Hz)
230 V ac (50
1 VA
99999
Hz)
Supply Voltage
Stock no.
12 → 48 V dc
24 V ac (50 Hz)
115 V ac (50 Hz)
230 V ac (50 Hz)
331-146
854-324
854-330
854-346
White ’run’ indicator when metering
Non-resettable
Finger protected screw terminals accept 4mm2 conductors
Power Consumption
Height
Width
Depth
4.4 mm
7
Yes
Stock no.
Supply Voltage
(Vac)
331-146
854-324
854-330
110
230
854-346
Price per
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
62·00
38·30
38·30
38·30
S$
6+
6+
6+
6+
57·00
35·30
35·20
35·30
S$
12+
12+
12+
12+
56·00
34·50
34·50
34·50
Stock no.
18 - 26
110 - 120
220 - 240
unit
unit
unit
OM
S$
1+
1+
1+
59·00
39·80
39·80
S$
6+
6+
6+
54·50
36·60
36·60
S$
12+
12+
12+
53·00
35·80
35·80
Stock no.
467-9105
Number Of Digits
Power Consumption
Count Capacity
Motor Driven
Price per
S$
S$
S$
1+ 177·50
5+ 173·00
10+ 168·50
Data retention in case of power failure
High shock resistance
Large optical figures
Non-resettable
UL certified
442-8373
Count Capacity
Supply Voltage (Vdc)
Power Consumption
Operating Temperature Range
Price per
unit
OM
S$
1+
78·00
1+
1+
51·00
51·00
6+
6+
56
S$
47·00
47·00
12+
12+
45·40
45·40
Price
per
OM
S$
208-0351
208-0345
unit
unit
1+
1+
52·00
59·50
5
-15 → +55 °C
99999.9 h
S$
6+
6+
S$
47·90
55·00
12+
12+
46·90
53·50
99999.99 h
4.5 - 35
135 mW
-10 → +60 °C
S$
6+
72·50
S$
12+
Pulse
24 mm
48 mm
32 mm
Digit Height
Number Of Digits
Operating Temperature Range
Stock no.
227-4821
227-4837
227-4865
Price per
unit
unit
unit
7 mm
8
0 to +50 °C
OM
S$
S$
S$
1+ 100·00
1+ 100·00
1+ 125·50
6+ 93·00
6+ 93·00
6+ 117·00
12+ 91·00
12+ 91·00
12+ 114·00
Shock Resistant Micro Hour Meter
SHK07.1 Shockproof
Stock no.
unit
unit
Stock no.
H/M/S Display
Total Hours Display
H/M/S Display, 12-24Vdc
5
14 - 17 mA
*
No
OM
unit
65 mm
30 mm
53 mm
7
313-980
313-974
S$
1.5 VA Number Of Digits
105 mm Operating Temperature Range
35 mm Count Capacity
60 mm
Description
DIN Rail Mounting
Height
Width
Depth
Number Of Digits
S$
Can display as either hours, minutes and seconds or total
number of hours
Resettable display
Powered by 3V lithium battery apart from 227-4865 which is
externally powered (12-24Vdc)
Panel cut out 45 x 22mm
IP54 rated
IP type
Height
Width
Depth
Ideally suited for monitoring scheduled maintenance, warranty
and leasing intervals
Flashing LCD segments and panel mounted LED and FET allow
different notification methods such as alarms or buzzers
Solid state design with no moving parts
12 - 48
53.6 mm
60 mm
5 mm
OM
LCD Time Counters
Maintenance Monitor
Supply Voltage (Vdc)
Depth
Dia.
Digit Height
Price
per
Panel Mounting 48x24
7
2 VA
99999.99 h
Price per
298-9494
298-9501
298-9517
Power Consumption
Height
Width
Depth
115
230
Number Of Digits
Power Consumption
Count Capacity
Supply Voltage (Vac)
Stock no.
7
-15 to +60 °C
99999 h
DIN rail/surface mounting hour meter
For easy reading the decimal digit is in red whilst the
other 5 digits are in white
Supply
Voltage (V ac)
Hour meters suitable for surface mounting
Terminal enclosure
Non-resettable
Elapsed time display
Operation indicator
48 mm
48 mm
60 mm
4 mm
Number Of Digits
Operating Temperature Range
Count Capacity
Double Module Wide
Counter for External Mounting,
Socket with Terminal Cover
Height
Width
Depth
Digit Height
1.5 VA
85 mm
17.5 mm
61.5 mm
71·00
Key-lock to avoid accidental operation
Self-powered by internal battery which can also be
replaced
Dual operation mode
Resettable display
Conforms to EMC Standards EN50082-2, EN50081-1
IP66 rated
The backlit version 348-2095 requires a 24Vdc supply
Height
24 mm
Digit Height
Width
48 mm
Number Of Digits
Depth
48.5 mm
Operating Temperature Range
Description
IP type
Count Capacity
Black
Volt free
999999.9 h → 3999 d 23.9 h
Black
Multi-voltage ac/dc 999 h 59 m 59 s → 9999 h 59.9 m
Black, backlit
NPN/PNP
999 h 59 m 59 s → 9999 h 59.9 m
Beige
Volt free
999 h 59 m 59 s → 9999 h 59.9 m
Manu. Part No.
Stock no.
H7ET-N-B
H7ET-NFV1-B
H7ET-NV1-BH
H7ET-N1
348-1935
348-2051
348-2095
348-2045
Price per
unit
unit
unit
unit
OM
8.6 mm
7
-10 to +55 °C
Manu. Part No.
Stock no.
H7ET-N-B
348-1935
H7ET-NFV1-B
348-2051
H7ET-NV1-BH
348-2095
H7ET-N1
348-2045
S$
S$
S$
1+ 75·00
1+ 113·00
1+ 102·00
1+ 85·50
6+ 73·50
6+ 110·80
6+ 100·00
6+ 83·80
12+ 72·00
12+ 108·50
12+ 98·00
12+ 82·10
My Account
www.rssingapore.com
www.rssingapore.com
Many more leading brands from over 2,500 suppliers available online
1343
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Counters, Timers & Hour Meters
Hour Meter - H7GP
Solid State Hour Meter
NPN/PNP selectable by DIP switch
Time range selectable by DIP switch
Electrical or Manual reset
EEPROM memory
56
IP type
Height
Width
Depth
NPN/PNP
24 mm
48 mm
80 mm
Digit Height
Number Of Digits
Operating Temperature Range
Count Capacity
Manu. Part
No.
Supply Voltage (V
dc)
H7GP-TD
12 → 24
Resettable
Count capacity
99999.9h
Circular types have
aluminium bezel and
toughened glass fascia
Rectangular and
’hexagonal’ types are in a polycarbonate material
2-wire types display only when voltage is present
3-wire types will display permanently if required
8.5 mm
6
-10 → +55 °C
0.1 → 99999.9 h, 1 s → 99 h 59 m 59 s
Stock no.
Price
per
204-5061
unit
OM
S$
S$
Digit Height
Number Of Digits
Description
Circular 2-wire
48 → 150 Vdc, 100 → 230
Rectangular 2-wire LV 12 → 48 Vdc, 20 → 60
Rectangular 2-wire HV 48 → 150 Vdc, 100 → 230
Hexagonal 2-wire
48 → 150 Vdc, 100 → 230
Circular 3-wire
12 → 48 Vdc, 20 → 60
Rectangular 3-wire LV
5 → 12 Vdc, 6 → 12
Rectangular 3-wire HV 12 → 48 Vdc, 20 → 60
Hexagonal 3-wire LV
5 → 12 Vdc, 6 → 12
Hexagonal 3-wire HV
12 → 48 Vdc, 20 → 60
1+ 167·00
Panel Mounting DIN Standard Size
Solid State
LCD display with LED backing
High shock resistance - meets and exceeds requirements of SAE J
1378
Resettable
Height
Width
Depth
48 mm
48 mm
44 mm
Digit Height
Number Of Digits
Panel Cut Out
Description
Stock no.
12-48Vdc
100-230Vac, 48-150Vdc
237-2385
237-2379
Description
7 mm
6
45 x 45 mm
Price per
unit
unit
OM
S$
1+
1+
64·00
76·00
S$
6+
6+
59·50
70·50
S$
12+
12+
58·50
69·00
Number Of Digits
Panel Cut Out
Supply Voltage Range (Vac)
Stock no.
Circular 2-wire
Rectangular 2-wire LV
Rectangular 2-wire HV
Hexagonal 2-wire
Circular 3-wire
Rectangular 3-wire LV
Rectangular 3-wire HV
Hexagonal 3-wire LV
Hexagonal 3-wire HV
6
45 x 45 mm
100 -250
Supply Voltage Range (Vac)
Supply Voltage Range (Vdc)
Digit Height
Stock no.
Description
Stock no.
Combined Hour/Counter
Combined Hour/Hour meter
183-379
183-385
Price per
unit
unit
OM
S$
S$
S$
1+ 126·50
1+ 126·50
6+ 117·50
6+ 117·50
12+ 115·00
12+ 115·00
www.rssingapore.com
1344
185-6012
185-6006
185-6028
185-6034
185-6078
185-6040
185-6084
185-6056
185-7087
OM = Order Multiple
dia 52 mm
DIN 24 x 48
DIN 24 x 48
36.8 x 24.1 mm
dia 52 mm
45.2 x 22.4 mm
DIN 24 x 48
36.8 x 24.1 mm
45.2 x 22.4 mm
Price per
unit
unit
unit
unit
unit
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
1+
1+
1+
1+
1+
55·00
55·00
48·80
48·80
55·00
48·80
48·80
50·50
48·80
Stock no.
185-6012
185-6006
185-6028
185-6034
185-6078
185-6040
185-6084
185-6056
185-7087
S$
6+
6+
6+
6+
6+
6+
6+
6+
6+
51·00
51·00
45·40
45·40
51·00
45·40
45·40
46·90
45·40
S$
12+
12+
12+
12+
12+
12+
12+
12+
12+
50·00
50·00
44·40
44·40
50·00
44·40
44·40
45·90
44·40
High shock/vibration resistance - meets and exceeds requirements of SAE J
1378
Resettable
Count capacity 99999.9h
High shock/vibration resistance
Supplied with 1/4in shrouded terminals
48 mm
48 mm
56 mm
5 mm
Size
Hour Meter
Combination Counter/Hour Meter
Height
Width
Depth
Digit Height
Supply Voltage (V ac)
S$
5 mm
6
IP Rating Panel Cut Out
(mm)
IP65
52
IP52
45.2 x 22.4
IP52
45.2 x 22.4
IP65
36.8 x 24.1
IP65
52
IP52
45.2 x 22.4
IP52
45.2 x 22.4
IP65
36.8 x 24.1
IP65
45.2 x 22.4
185-6107
20 - 60
12 - 48
5 mm
Price per
unit
Number Of Digits
Dimensions (WxHxD)
Panel Cut Out
OM
S$
1+
40·80
6
32 x 18 x 8 mm
31 x 15.5 mm
S$
6+
38·00
S$
12+
37·10
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
111
- On Delay
Brand Code
Ɂ
Al
Ɂ
Ɂ
Ɂ
Ɂ
Ɂ
K
P
Ɂ
CE
BE
Ɂ
DP
–
–
A
–
Al
–
11
E
–
Delay on energisation
Brand
Brodersen
Broyce Control
Crouzet
ABB
Finder
Omron
Saia-Burgess
Tele Automation
Components
Trumeter
121 -
On Delay (Control Switch Resettable)
Brand Code
Brands
Brand
Description
–
Delay on
Broyce Control
(from volts free contact closing)
N
Safe guard
Crouzet
Ɂ
Ɂ
H
O
Ht
B
Ɂ
Ɂ
Ɂ
DI
Ɂ
Ɂ
DE
INT
Ɂ
Ɂ
Ɂ
Ɂ
Ɂ
Ɂ
Ɂ
Ɂ
Ɂ
Ɂ
W
Bw
Di
D
L
Li
Q
Ɂ
131 -
On Delay (Control Switch Interruptible) Type 1
Brand Code
Brands
Brand
Description
At
Timing on energisation with memory
Crouzet
132 -
On Delay (Control Switch Interruptible) Type 2
Brand Code
Brands
Brand
Description
A2
Power on delay
Omron
On Delay (Constant Supply) Type 1
Brand Code
Brands
Brand
Description
DE
Delay on
Baron Control
–
On delay (constant supply) type 2
Broyce
A1
Signal on delay 2
Omron
Es
On delay with control contact
Tele Automation
Components
On Delay (Constant Supply) Type 2
Brand Code
Brands
Description
–
Delay on
(from volts free contact opening)
–
’ON’ delay
F
Sustained output
1
On delay time delay
dE-1
1 on delay
dE-2
2 independant on delays
Ɂ
Ɂ
Ɂ
Ɂ
Ɂ
Ɂ
A
A
161 -
SW
–
A1
191 -
G
D
16
12
Ɂ
E
Ɂ
Ɂ
19
Ɂ
Trumeter
–
Tele Automation Components
Schneider
Es
1
5 / 11
21
28
G
E
Ɂ
Ɂ
Ɂ
Brands
Description
On delay
Signal on delay 1
C
B2
B
F
PI
LI
PE
LE
10
dE
E+R
R
Ɂ
dd
A
E + Wa
dP
Ɂ
Ɂ
Ɂ
Int/It
Ɂ
Ɂ
Ɂ
2
23
E + Ws
E + Ws
eW / Wu
Ɂ
Wt
Ws
aW / Wa
Ɂ
22
6
42
4
3
Ɂ
Ɂ
Ɂ
Ɂ
51
Ɂ
Ɂ
Ɂ
Ɂ
Bp
Lp
Li
cct
8
7
Ɂ
S
211 Brand
Broyce
ABB
Omron
Schneider
–
–
Brand
Hengstler
Omron
On Delay with Instantaneous Contact
Brand Code
B
EE
On Delay ( Constant Supply) Type 3
Brand Code
A
56
Ɂ
E
C
Ɂ
143 -
11
GI
Ɂ
DCY
ICY
Ɂ
A2
A1
F
A
Ɂ
A1
Ac
C
Saia-Burgess
Ɂ
Ɂ
Hengstler
Finder
ABB
Crouzet
Ɂ
Ɂ
DE
DD
A
N
At
Omron
Ɂ
Ɂ
142 Brands
Description
On delay
Delay on operation
Delay on energisation
On delay
On delay
On delay
Delayed operation
On delay
141 -
Ɂ
Broyce Control
RS Description
On Delay
On Delay (Control Switch Resettable)
On Delay (Control Switch Interruptible) Type 1
On Delay (Control Switch Interruptible) Type 2
On Delay (Constant Supply) Type 1
On Delay (Constant Supply) Type 2
On Delay ( Constant Supply) Type 3
On Delay with Instantaneous Contact
On Off Delay (Constant Supply)
Off Delay (Constant Supply) Type 1
Off Delay (Constant Supply) Type 2
True Off Delay
Delayed Pulse (Constant Supply)
Delayed Pulse (Remote Trigger)
Delayed Pulse (Constant Supply) Type 1
Delayed Pulse (Constant Supply) Type 2
On Pulse
On Pulse (Control Switch Resettable)/Watchdog
On Pulse (Supply Reset)
On Pulse (Control Switch Interruptible)
On Pulse (Constant Supply) Type 1
On Pulse (Constant Supply) Type 2
On Pulse (Constant Supply) Type 3
On Pulse (Constant Supply) Type 4
Off Pulse
On Off Pulse
Symmetrical Recycler Pulse Start
Symmetrical Recycler Pause Start
Asymmetrical Recycler Pause Start
Asymmetrical Recycler Pulse Start
Asymmetrical Recycler (Constant Supply) Pause Start
Asymmetrical Recycler (Constant Supply) Pulse Start
Star Delta Type 1
Star Delta Type 2
Brodersen
Timer Function Code
111
121
131
132
141
142
143
161
191
211
212
311
411
412
413
414
421
431
432
441
451
452
453
454
511
521
611
612
651
652
661
662
711
712
Baron Control
Cross Reference Tables / Timer Functions
Brands
Brand
Description
Delay with instantaneous contact Broyce Control
On delay (1 timed, 1 instantaneous)
Crouzet
On Off Delay (Constant Supply)
Brand Code
Brands
Brand
Description
Ac
Timing after closing and opening of
Crouzet
control contact
CE
Signal on/off delay
Finder
G
Signal on/off delay
Omron
16
Delayed operation and release
Saia-Burgess
E+R
On and off delay
Tele Automation
Components
–
On/off delay (constant supply)
–
Off Delay (Constant Supply) Type 1
Brand Code
Brands
Brand
Description
–
Release delay
Brodersen
DD
Delay off
Baron Control
–
Off delay (switch initiated)
Broyce Control
C
Timing after impulse
Crouzet
–
’OFF’ delay
ABB
BE
Signal off delay
Finder
B
Off delay
Hengstler
D
Signal off delay
Omron
12
Delayed release
Saia-Burgess
5
Off delay time delay at contact
Schneider
opening
11
Off delay function at contact
Schneider
opening
R
Off delay
Tele Automation
Components
dd-1
1 off delay
–
dd-2
2 independant off delays
–
–
Off delay
Trumeter
212 -
Off Delay (Constant Supply) Type 2
Brand Code
–
311
-
Brand Code
–
–
K
–
–
19
10
A
Brands
Description
Off delay (constant supply) type 2
Brand
Trumeter
True Off Delay
Brands
Description
True off delay
True delay off
Delay on energisation
True off delay
Power off delay
True off delay (power off)
Self powered off delay function
True off delay
Visit our website for additional price information and exciting promotions
Brand
Brodersen
Broyce Control
Crouzet
Hengstler
Omron
Saia-Burgess
Schneider
Tele Automation
Components
1345
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Counters, Timers & Hour Meters
411 -
Delayed Pulse (Constant Supply)
Brand Code
Brands
Description
–
Delayed pulse (constant supply)
P
Delayed fixed length pulse
E
On delay / interval
–
Delayed pulse (constant supply)
–
Delayed pulse (constant supply)
E + Wa
Delayed pulse leading edge
56
dP
–
Delayed pulse
Delayed pulse (constant supply)
452 Brand
Broyce Control
Crouzet
Hengstler
Omron
Saia-Burgess
Tele Automation
Components
–
Trumeter
412
Delayed Pulse (Remote Trigger)
Brand Code
Brands
Brand
Description
DP
Delayed pulse
Baron Control
GI
Fixed pulse delayed
Finder
–
One shot
Trumeter
413 -
Delayed Pulse (Constant Supply) Type 1
Brand Code
Brands
Brand
Description
E + Ws
Delayed pulse leading edge pulse Tele Automation
started
Components
453 -
On Pulse (Constant Supply) Type 3
Brand Code
Brands
Description
INT
Interval
C
Interval
–
On pulse (constant supply) type 3
–
Single shot
454 -
On Pulse
Brand Code
–
–
H
–
DI
21
–
2
eW
Brands
Description
On pulse without control switch
Interval supply initiated (single shot)
Timing on energisation
On pulse
On pulse
Fleeting on delay
Single pulse on ’ON’
Pulse on energisation function
Single shot timer
Wu
Single shot leading edge
Brand
Brodersen
Broyce Control
Crouzet
ABB
Finder
Saia-Burgess
Saia-Burgess
Schneider
Tele Automation
Components
Tele Automation
Components
Brand Code
Brands
Description
1 interval
Single shot
Int1
C
On Pulse (Control Switch Resettable)/Watchdog
Brand Code
Brands
Brand
Description
–
Interval (switch initiated)
Broyce Control
O
Delayed safe guard
Crouzet
28
Fleeting on delay with pulse control Saia-Burgess
–
On pulse (control switch resettable)/ Tele Automation
watchdog
Components
432
On Pulse (Supply Reset)
Brand Code
Brands
Description
Wt
Pulse detection
Brand
Tele Automation
Components
441 -
On Pulse (Control Switch Interruptible)
Brand Code
Brands
Brand
Description
Ht
Delay on energisation with memory
Crouzet
451 -
On Pulse (Constant Supply) Type 1
Brand Code
Brands
Brand
Description
–
On pulse with control switch
Brodersen
B
Timing on impulse one shot
Crouzet
–
Non triggerable one shot
ABB
DE
Signal on pulse
Finder
G
Interval 2 one shot
Hengstler
E
Interval
Omron
23
Pulse converter
Saia-Burgess
Ws
Single shot leading edge
Tele Automation
Components
OM = Order Multiple
Baron Control
Hengstler
–
Trumeter
Brand
–
–
Brands
Description
Off pulse
Timing after impulse on control
contact
Signal off pulse
Fleeting off delay
Pulse on energisation at contact
opening function
–
W
EE
22
6
521 -
C
Brands
Description
On off pulse
Timing at the closing and opening of
control contacts
Signal on/off
Asymmetrical Recycler Pause Start
Brand Code
Brands
Brand
Description
–
Asymmetrical recycler pause or
Brodersen
pulse start
L
Asymmetrical flip flop pause start
Crouzet
PI
Asymmetrical recycler (off start)
Finder
–
Asymmetrical recycler pause start
Schneider
Lp
Cyclic timer (pause start)
Tele Automation
Components
–
Repeat cycle delay
Trumeter
652 -
Asymmetrical Recycler Pulse Start
Brand Code
Brands
Brand
Description
–
Asymmetrical recycler pause or
Brodersen
pulse start
Li
Asymmetrical flip flop pulse start
Crouzet
LI
Asymmetrical recycler (on start)
Finder
–
Asymmetrical recycler pulse start
Schneider
Li
Cyclic timer (pulse start)
Tele Automation
Components
–
Repeat cycle
Trumeter
Asymmetrical Recycler (Constant Supply) Pause
Start
Brand
Brand Code
Brodersen
Crouzet
DCY
–
Finder
Saia-Burgess
Schneider
PE
–
cct
On Off Pulse
Brand Code
651 -
661 -
511 -
–
Bw
431 -
Brand
On Pulse (Constant Supply) Type 4
Off Pulse
Brand Code
421 -
1346
On Pulse (Constant Supply) Type 2
Brand Code
Brands
Brand
Description
–
Single pulse on ’OFF’
ABB
aW
Single shot timer (trailing edge) Tele Automation
Components
Wa
Single shot trailing edge
Tele Automation
Components
Brand
662 -
Omron
ICY
LE
–
611 -
Brand Code
–
–
Di
–
SW
F
B2
42
4
–
612 –
–
D
–
B
3
Bp
–
Brands
Description
Symmetrical recycler pulse or
pause start
Symmetrical recycler ON/OFF
Symmetrical flip flop, pulse start
Flasher starting with ’ON’
Symmetrical recycler on start
Repeat cycle with start signal
Symmetrical recycler pulse start
Flasher relay
On delay flasher function
Symmetrical repeat cycle
Baron Control
Brodersen
Finder
Saia-Burgess
–
Brands
Description
Immediate cycle
Signal asymmetrical recycler (on
start)
Asymmetrical recycler (constant
supply) pulse start
Asymmetrical recycler (constant
supply) pulse start
Brand
Baron Control
Finder
Saia-Burgess
–
Brand
Brodersen
Broyce Control
Crouzet
ABB
Finder
Hengstler
Omron
Saia-Burgess
Schneider
Trumeter
711 -
Star Delta Type 1
Brand Code
Q
–
–
51
8
S
Symmetrical Recycler Pause Start
Brand Code
–
–
Symmetrical Recycler Pulse Start
Brand
Asymmetrical Recycler (Constant Supply) Pulse
Start
Brand Code
Brodersen
Crouzet
Brands
Description
Delayed cycling
Asymmetrical recycler (constant
supply) pause start
Signal asymmetrical recycler (off
start)
Asymmetrical recycler (constant
supply) pause start
Cycle timer variable on and off
Brands
Brand
Description
Symmetrical recycler with pause
Brodersen
start
Symmetrical recycler pause or
Brodersen
pulse start
Symmetrical recycler OFF/ON
Broyce Control
Symmetrical flip flop, pause start
Crouzet
Flasher starting with ’OFF’
ABB
Flicker off start
Omron
Off delay flasher function
Schneider
Flasher (pause start)
Tele Automation
Components
Symmetrical repeat cycle delay
Trumeter
712 -
Star Delta Type 2
Brand Code
–
–
–
7
Brands
Brand
Description
Star delta
Crouzet
Star delta changeover with wiping
ABB
function
Star delta type 1
Omron
Star delta
Saia-Burgess
Star delta with pulse on
Schneider
energisation
Star delta start timer
Tele Automation
Components
Brands
Description
Star delta start
Star delta type 2
Star delta changeover with twice
delay
Star delta function with double
delay at energisation
Brand
Broyce Control
Crouzet
ABB
Schneider
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
Timer Functions (Page 1 of 2)
Note: The functions detailed below have no industry standard titles. They may be titled differently by the manufacturers.
Diagram
111
On Delay
121
On Delay (Control Switch
Resettable)
131
On Delay (Control Switch
Interruptible) Type 1
132
On Delay (Control Switch
Interruptible) Type 2
141
On Delay (Constant Supply)
Type 1
142
On Delay (Constant Supply)
Type 2
143
On Delay ( Constant Supply)
Type 3
161
On Delay with Instantaneous
Contact
191
On Off Delay (Constant
Supply)
211
212
311
411
412
413
The timing period starts when the supply voltage is applied. After the pre-set time period has elapsed,
the output relay ’R’ is energised. ’R’ Will stay energised until the supply is interrupted, if the supply is
interrupted then ’R’ returns to its original state.Regardless of when this occurs the timer starts from
the beginning of the cycle all over again.
The timing period starts when the supply voltage is applied. The output relay ’R’ will
energise after this period has elapsed, unless the control switch input ’S’ is repeatedly
closed and then opened. The timer monitors the leading edges of the control
switch pulses. Pulse length therefore has to be shorter than that of the timer period set.
The timing period starts when the supply is applied to the timer with the control
switch ’S’ open. Closing ’S’ causes the timer to pause its timing, without resetting.
Timing then resumes once ’S’ is opened again. Therefore the total time taken
for the output relay ’R’ to energise is the preset timing period plus the sum of the
time ’S’ was closed. Removal the supply will cause the timer to reset the timing
period back to the preset value.
The timing period starts when both the supply and control switch are energised. Opening the control
switch suspends timing but does not reset the time sequence. Therefore, the total time taken before
the delayed contact changes state is the pre set time plus any time that the control switch is open.
Interrupting the supply resets the timer. If the control switch remains closed during and after the
reset, timing will resume immediately the supply is resumed.
A permanent supply is required. A control switch ’S’ is used to control the timer
function. The delay period starts once switch ’S’ is closed.Once the preset time period
has elapsed then output relay ’R’ energises. Opening ’S’will cause ’R’ to de-energise,
and likewise closing it again will start the timing period from the beginning, this action
may be performed at any point of the timing cycle.
Timing will commence when the supply is present and switch ’S’
is open. After the time period has elapsed, the output relay ’R’ will energise.
If however ’S’ is closed then the timing period resets to the beginning
of the cycle. Timing will restart only when ’S’ has been opened. Therefore
there are 2 methods this timer can be controlled, either by opening and closing ’S’
or with the interruption of the supply voltage to the timer with switch ’S’ open.
A permanent supply is required. The timing period starts when the control
switch ’S’ is closed and will continue irrespective of any further changes to ’S’.
After the elapsed time output relay ’R’ energises. To reset the timer, switch ’S’ must be
opened. This does not de-energise the relay. It is de-energised and the
function repeated when switch ’S’ is reclosed. (ie, the timer must see a leading edge).
The timing period starts when the supply voltage is applied. The output relay ’R’2
energises immediately. After the pre-set time period has elapsed, the output relay ’R’1
’R’1 and ’R’2 will stay energised until the supply is interrupted. If the supply is
interrupted ’R’1 and ’R’2 return to their original state. Regardless of when this occurs
the timer starts from the beginning of the cycle all over again.
56
A permanent supply is required. Control switch ’S’ controls the timer function. When
switch ’S’ is closed, the timer period starts. Once this has elapsed output relay ’R’ energises. If switch
’S’ is opened the relay remains energised for the same length of time
as the first preset time period. Once this too has elapsed the relay de-energises and
remains so until switch ’S’ is closed again. Closing switch ’S’ and then opening it before
the time period has elapsed will not cause activation of ’R’.
Off Delay (Constant Supply) A permanent supply is required. The timer function is triggered by the use of
Type 1
control switch ’S’. When ’S’ is closed the output relay ’R’ will energise immediately.
The timing period will start once ’S’ is opened, with ’R’ still energised. Once this period
has elapsed then ’R’ will de-energise. Closing ’S’ at any time in the cycle will
cause ’R’ to energise if it is not already and the timing period to start from the beginning.
Off Delay (Constant Supply) A permanent supply is required. The timer function is triggered by the use of
Type 2
control switch ’S’. When the switch is closed the output relay ’R’ will energise immediately.Once the
timing period has started further actions of ’S’ will have no effect. However once the timing cycle has
been completed the process may be started again
by closing ’S’. While the timer is executing this function the only way to reset the timer is to interrupt
the supply.
True Off Delay
When the supply is applied the timer output relay ’R’ will energise. When the supply
is removed ’R’ will stay energised for the preset time period.Re-applying the supply
will cause ’R’ to energise again (if it is not already) and the timing period
starts when the supply is disconnected again. A point to note is that the timer needs
to store the energy to retain the output relay in the energised state after the supply
has been removed. This will reflect in the length of time the supply has to be applied.
Delayed Pulse (Constant The timing period starts when the supply is applied to the timer. After the preset
Supply)
has elapsed the output relay ’R’ will energise for the preset pulse duration.
To reset the timer the supply has to be interrupted. If this interruption occurs
during the pulsed output then the relay will de-energise and the timer
will reset. (’T’ is the delay duration and ’t’ is the pulse duration).
Delayed Pulse (Remote
The timing period will start when control switch ’S’ is closed with the
Trigger)
supply connected. After preset time has elapsed the output relay ’R’ will energise
for the pre-selected pulse duration. To reset the timer either control switch ’S’ is open
or the supply has to interrupted. If this action occurs during the pulsed output
cycle then the relay will de-energise and the timer will reset. (’T’ is the delay
duration and ’t’ is the pulse duration).
Delayed Pulse (Constant Supply to the unit must be continuous. On closure of the ’S’ the time period ’t1’ starts to run.On
Supply) Type 1
completion of ’t1’, the relay ’R’ energises immediately and the time period ’t2’ starts to run. On
completion of ’t2’ the relay ’R’ de-energises. The control contact ’S’ has no effect until ’t1’ + ’t2’ have
completely expired.
414
Delayed Pulse (Constant
Supply) Type 2
The supply is connected permanently to the timer. A switch ’S’ is used to control
the timer function (refer to the timing diagram). The delay time period starts closing
After elapse of time set the output relay ’R’ is energised for a fixed period T2.
Opening switch ’S’ during time period ’T’ has no affect, but re-closing will initiate
timing ’T’ once more.
421
On Pulse
When the supply is connected the output relay ’R’ energises and the timing function starts. After the
preset timer period has elapsed ’R’ de-energises. Interrupting the supply resets the time period. If this
interruption occurs before the period has elapsed ’R’ will de-energise the timing period resets.
431
On Pulse (Control Switch
Resettable)/Watchdog
Output relay ’R’ will energise as soon as the supply is applied to the timer if
control switch ’S’ closed, and will start to time out unless control switch ’S’ opened and then closed
repeatedly within the time period. The timer will not time out while it sees a continuous series of
pusles. If ’R’ does de-energise, then the timer can be reset by closing control switch ’S’ and repeating
the process as before.
New products available online every week
1347
www.nguyenxuong.com
Counters, Timers & Hour Meters
ON-LINE
www.rssingapore.com
Timer Functions (Page 2 of 2)
Diagram
56
432
On Pulse (Supply Reset)
On application of supply voltage the relay energises. The first pulse of ’S’ starts the time
period. Receiving pulses during the time period extends it and ’R’ stays energised.
Receiving no pulses during the time period completes it and ’R’ de-energises. ’R’ stays latched until
supply voltage has been interrupted.
441
On Pulse (Control Switch
Interruptible)
When the timer supply is connected output relay ’R’ energises and the timer period starts. If control
switch ’S’ is closed then the timing is suspended. Only when ’S’ is open again will the timing resume.
Therefore the total time output relay ’R’ is energised is equal to the preset time period plus the sum of
the time ’S’ is closed. Interrupting the supply will reset the timer.
451
On Pulse (Constant Supply)
Type 1
A permanent supply is required. Control switch ’S’ controls the timers function. When ’S’ is closed
output relay ’R’ energises and will then time out irrespective of any further action of ’S’. To reenergise ’R’, ’S’ must be opened and then closed after ’R’ has de-energised.
452
On Pulse (Constant Supply)
Type 2
A permanent supply is required. Control switch ’S’ controls the timers function. When ’S’ is opened
output relay ’R’ energises and will then time out irrespective of any further action of ’S’. To reenergise ’R’, ’S’ must be closed and then opened after ’R’ has de-energised.
453
On Pulse (Constant Supply)
Type 3
A permanent supply is required. Control switch ’S’ controls the timers function. When ’S’ is closed
and remains closed the output relay ’R’ will energise and only de-energise after it has timed out. If ’S’
is opened during the timing period relay ’R’ resets.
454
On Pulse (Constant Supply)
Type 4
A permanent supply is required. Control switch ’S’ controls the timers function. When ’S’ is opened
and remains open the output relay ’R’ will energise and only de-energise after it has timed out. If ’S’ is
closed during the timing period relay ’R’ resets.
511
Off Pulse
521
On Off Pulse
A permanent supply is required. Control switch ’S’ controls the timers function. Closing control ’S’ has
no effect on output relay ’R’. However when ’S’ is opened ’R’ will energise and starts the time period,
after which it will de-energise. If switch ’S’ is pulsed during that timing period it will have no effect on
relay ’R’. Closing and then re-opening ’S’ will repeat the timing operation after the completion of the
timing period.
A permanent supply is required. Control switch ’S’ controls the timers function. The
output relay ’R’ is energised by either opening or closing control switch ’S’. Once a timing period has
started it cannot be interrupted by changing the state of ’S’.
611
612
651
652
661
662
711
Symmetrical Recycler Pulse When the supply is connected to the timer it will energise the output relay ’R’ for the preset time and
Start
then de-energise for the same preset time interval. This operation will repeat indefinitely until the
supply is removed. The timer will always start at the same point of the cycle regardless of where it
was when the supply was removed. The unit can be either pause or pulse start depending on wiring
or type.
Symmetrical Recycler Pause When the supply is connected to the timer the preset time will elapse before output relay "R"
Start
energises for the same preset time interval. This operation will repeat indefinitely until the supply is
removed. The timer will always start at the same point of the cycle regardless of where it was when
the supply was removed. The unit can be either pause or pulse start depending on wiring or type.
Asymmetrical Recycler Pause When the supply is connected to the timer the first preset time will elapse before the output relay ’R’
Start
will energise. The output will stay energised for the second preset time period (which is set
independently to the de-energised time) it will return to the de-energised state and repeat the whole
process over again. This is continued until the supply is removed. The timer will always start in the
de-energised part of the cycle regardless of which state it was in when the supply was removed.
Asymmetrical Recycler Pulse When the supply is connected to the timer the output relay will energise for the first preset time.
Start
Once this has elapsed the output will de-energise and stay de-energised for the second preset time
period (which is set independently to the energised time). Once this has elasped then it will return to
the energised state and repeat the whole process over again, until the supply is removed. The timer
will always start in the energised part of the cycle regardless of which state it was in when the
supply was removed.
Asymmetrical Recycler
A permanent supply is required. The timer function is triggered by the use of a control switch ’S’.
(Constant Supply) Pause Start When ’S’ is closed the output relay ’R’ will remain de-energised while the first preset time period
elapses. Once this time period has elapsed ’R’ will energise for the second preset time period (which
is set independently). Once this second time period had elapsed then ’R’ will de-energise and the
cycle will start from the beginning again.If ’S’ is opened the cycle will stop, with it starting in the deenergised state when the switch is closed again.
Asymmetrical Recycler
A permanent supply is required. The timer function is triggered by the use of a control switch ’S’.
(Constant Supply) Pulse Start When ’S’ is closed the output relay ’R’ will energise while the first preset time period elapses. Once
this time period has elapsed ’R’ will de-energise for the second preset time period (which is set
independently). Once this second time period had elapsed then ’R’ will energise and the cycle will
start from the beginning again. If ’S’ is opened the cycle will stop, with it starting in the energised
state when the switch is closed again.
Star Delta Type 1
This function of a timer has 2 sets of normally open contacts. The timing period starts when the
supply is connected. At this point the first output relay ’R1’ will energise.
This is used to control the ’STAR’ contactor. After the preset time interval the contacts
will open. A preset dwell time will elapse after which the second output relay ’R2’ will close.
712
Star Delta Type 2
713
Star/Delta Timer Type 3
1348
OM = Order Multiple
This type of timer uses 2 sets of contacts. One being normally open and the other
is normally closed. Alternatively 2 sets of change over contacts may be used. The timing
period starts when the supply is applied. After the preset interval has elapsed the normally closed
contact will energise opening the circuit. This is used to control the
’STAR’ contactor. After the preset dwell time has elapsed the normally open contacts will
close, this is used to control the DELTA contactor. The timer will reset
itself when the supply is removed. (’t’ is the dwell time).
This function only employs one normally closed contact. This has to be wired to a
suitable control circuit. When the supply is applied the contact remains closed for the delay period
set on the unit, time ’T’. At the end of the time period the contact opens for a fixed period of time
(manufacturer preset, time ’t’) and then recloses.
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
Solid State – CT-MKE
Multifunction
Functions - 111, 421, 611, 612
On-delay function is AC/DC, other functions are AC
Thyristor output
Voltage should not be applied without a load connected
22.5mm wide
Approvals: UL listed/UL listed for Canada; GL; GOST; C-Tick
Standards: IEC / EN 61812-1
CT-D - multifunction time relays
Electronic multi-function time relay
Functions: response delay, fallback delay with auxiliary voltage, impulse-on,
impulse-off, impulse or pause start timer, impulse shaper
Wide range input
5 A to 250 V contact capacity
Simple adjustment via potentiometer with absolute display
LEDs for status display
Approvals: CE, UL
Height
Depth
Contact Configuration
RS Timer
111, 211, 421, 431, 521, 611, 612 Size
17.5 mm
Function
Time Range
0.05 s → 100 h (7 time ranges) Connection Type Connecting Terminal
Supply Voltage 12 → 240 VAC / DC
Operating
-20 → +60 °C °C
Temperature
Range
Output Contacts 2-changeover
Stock no.
185-924
Price per
OM
unit
Manu. Part No.
S$
S$
S$
Function - 111, 191, 211, 421, 454, 521 + pause,611, 612, 711 & test function
10 time ranges
2nd contact is selectable as an instantaneous contact
Will accept remote potentiometer connection for fine adjustment of the time
delay
Control input with volt-free triggering
Double-chamber cage connecting terminals
Operating temperature: -25°C to +60°C
22.5mm wide
Approvals: cULus, GL, GOST, CCC, CE, C-tick
Standards: IEC/EN61812-1
Manu. Part No.
Stock no.
CT-MBS.22
333-723
Supply Voltage
Contact Configuration
Price per
unit
OM
Manu. Part No.
1SVR 500 020 R 0000
Stock no.
489-7151
Price per
24 → 48 Vdc; 24 → 240 V ac
DPDT
S$
S$
1+ 184·00
6+ 173·00
S$
unit
S$
S$
S$
1+ 128·50
6+ 121·00
12+ 118·00
92·50
6+
87·00
S$
12+
85·00
333-739
333-773
4 A @ 250 V ac
0.05 s → 300 h
Output Contacts
Stock no.
SPDT
333-739
DPDT
333-773
Price per
unit
unit
OM
S$
S$
S$
1+ 163·00
1+ 200·00
6+ 153·00
6+ 190·00
12+ 150·00
CT-MVS.21 - Multifunction
Manu. Part No.
CT-MVS.21
4 A @ 250 V ac
0.05 s → 300 h
Stock no.
333-751
Price per
unit
Supply Voltage
Contact Configuration
OM
24 → 240 Vac/dc
DPDT
S$
S$
1+ 205·00
6+ 192·50
S$
Function - 191 (independently adjustable ON/OFF times), 521 + reset, 651,
652 + reset, 662 + pause
2x 10 time ranges
Will accept 2x remote potentiometer connections for fine adjustment of the
time delay
Control input with voltage-related triggering
Double-chamber cage connecting terminals
Operating temperature: -25°C to +60°C
22.5mm wide
Approvals: cULus, GL, GOST, CCC, CE, C-tick
Standards: IEC/EN61812-1
0.05 s → 100 h
24 → 240 Vac/dc
4 A @ 250 V ac
78 mm Time Range
78.5 mm Supply Voltage
SPDT Contact Rating - Resistive Load
Contact Rating - Resistive
Load
Time Range
1SVR 550 029 R8100
1+
S$
CT-MXS - Multifunction
Functions – 111,211, 421, 431, 611, 612
Direct reading scales for fast positive adjustment
Rotary switch selection of desired function
LEDs for status indication
22.5mm wide
Approvals: UL listed/UL listed for Canada; GL; GOST; C-Tick
Standards: IEC/EN 61812-1
Manu. Part No.
Stock no.
CT-MVS.12
CT-MVS.23
Contact Rating - Resistive Load
Time Range
CT-MFE
Height
Depth
Contact Configuration
S$
Function - 111, 131, 191, 211, 421, 454, 521 + pause, 611 & 612 combined, &
test function
10 time ranges
2nd contact is selectable as an instantaneous contact
Will accept remote potentiometer connection for fine adjustment of the time
delay
Control input with voltage-related triggering
Double-chamber cage connecting terminals
Operating temperature: -25°C to +60°C
22.5mm wide
Approvals: cULus, GL, GOST, CCC, CE, C-tick
Standards: IEC/EN61812-1
Time Range 0.05 s → 100 h
OM
OM
56
Function - 111, 131, 191, 211, 421, 454, 521 + pause, 611 & 612 combined, 711
& test function
10 time ranges
Control input with voltage-related triggering
Double-chamber cage connecting terminals
Operating temperature: -25°C → +60°C
22.5mm wide
Approvals: cULus, GL, GOST, CCC, CE, C-tick
Standards: IEC/EN61812-1
Manu. Part No.
Functions – 111, 211, 421, 431, 454, 611, 612
SPDT contact configuration
Parallel load to the voltage related control inputs is possible
Wide voltage range
LEDs for status indication
Operating temperature range: -20°C to +60°C
Contact material: AgSnO222.5mm wide
Approvals: UL listed/UL listed for Canada; GL; GOST; C-Tick
Standards: IEC/EN 61812-1, DIN VDE 0435 pt 2021
24 → 48 Vdc; 24 → 240 V ac
8 A @ 250 V ac
unit
Contact Rating - Resistive Load
Time Range
Manu. Part No.
Supply Voltage (V ac)
CT-MVS.12
24 → 48 Vdc; 24 → 240
CT-MVS.23
380 → 440
CT-MFD
Supply Voltage
Contact Rating - Resistive Load
442-9168
Price per
0.8 A @ 240 V ac
24 → 240 Vac/dc
0.1 → 300s
CT-MVS - Multifunction
1+ 215·00
4 A @ 250 V ac
0.05 s → 300 h
Stock no.
1SVR 550 019 R0000
CT-MBS - Multifunction
Contact Rating - Resistive Load
Time Range
78 mm Contact Rating - Resistive Load
78.5 mm Supply Voltage
Thyristor Timer Range
Stock no.
442-9297
Price per
unit
OM
S$
1+ 105·00
S$
6+
98·50
S$
12+
96·50
Manu. Part No.
CT-MXS.22
CT-MFS - Multifunction
4 A @ 250 V ac Supply Voltage
0.05 s → 300 h Contact Configuration
Stock no.
333-745
Price per
unit
OM
24 → 48 Vdc;
24 → 240 V ac
DPDT
S$
S$
1+ 210·00
6+ 197·50
S$
CT-WBS - On Pulse & Symmetrical
Function - 111, 191, 211, 421, 454, 521 + pause,611, 612, 711 & test function
10 time ranges
2nd contact is selectable as an instantaneous contact
Will accept remote potentiometer connection for fine adjustment of the
time delay
2x control input with volt-free triggering
Double-chamber cage connecting terminals
Operating temperature: -25°C to +60°C
22.5mm wide
Approvals: cULus, GL, GOST, CCC, CE, C-tick
Standards: IEC/EN61812-1
Function - 111, 411, 421, 521+pause, 611, 612
10 time ranges
Double-chamber cage connecting terminals
Operating temperature: -25°C to +60°C
22.5mm wide
Approvals: cULus, GL, GOST, CCC, CE, C-tick
Standards: IEC/EN61812-1
Contact Rating - Resistive Load 4 A @ 250 V ac Supply Voltage 24 → 48 Vdc; 24 → 240 V ac
Contact Configuration
DPDT
Time Range 0.05 s → 300 h
Contact Rating - Resistive Load 4 A @ 250 V ac Supply Voltage
24 → 240 Vac/dc
Time Range
0.05 s → 300 h Contact Configuration DPDT
Manu. Part No.
CT-MFS.21
Stock no.
333-717
Price per
unit
OM
S$
S$
1+ 205·00
6+ 192·50
S$
Manu. Part No.
CT-WBS.22
Stock no.
333-846
Price per
unit
OM
S$
S$
S$
1+ 135·50
6+ 127·50
12+ 124·50
Many more leading brands from over 2,500 suppliers available online
1349
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Counters, Timers & Hour Meters
XM Series
Functions - 111, 421, 611, 612
Used for control applications or for direct switching of light loads
LED indication of output relay energisation
27mm wide
Standards: EN50081-1, EN50082-2
56
0.6 s → 60 min
10.5 → 265 Vac/dc
Contact Rating - Resistive Load Manu. Part
(V ac)
No.
8 A @ 240
XM-D-1
5 A @ 240
XM-D-2
Time Range
Supply Voltage
Contact
Configuration
SPDT
DPDT
Manu. Part
No.
Contact
Configuration
XM-D-1
XM-D-2
SPDT
DPDT
Stock no.
Price
per
341-373
260-448
unit
unit
OM
XW-S-1
XW-S-2
SPDT
DPDT
Stock no.
341-373
260-448
S$
S$
S$
1+ 136·00
1+ 130·00
6+ 126·50
6+ 121·00
12+ 124·00
12+ 118·50
Height
Depth
Contact Configuration
Manu. Part
No.
Stock no.
Contact
Configuration
XM-S-1
XM-S-2
SPDT
DPDT
Price
per
329-137
329-222
unit
unit
OM
unit
unit
OM
S$
S$
S$
1+ 124·50
1+ 136·00
6+ 116·00
6+ 126·50
12+ 113·50
12+ 124·00
unit
8 A @ 250 V ac
24 Vac/dc; 230 V ac
0.24 s → 10 h
S$
1+ 101·50
S$
6+
S$
94·50
12+
92·50
M1MFT
4 Functions – 111, 421, 611, 612
Can also be surface mounted
CE marked
17.5mm wide
12 → 240 Vac/dc
0.6s → 60m
Stock no.
329-200
329-238
Price per OM
296-7365
Height
Depth
Contact Configuration
Manu. Part
No.
Price
per
89 mm Contact Rating - Resistive Load
59 mm Supply Voltage
SPDT Time Range
M1DFD
Supply Voltage
Timer Range
Stock no.
Functions - 111, 211
LED indication for supply and relay status
Flame retardant housing to UL 94V-0
On and Off delay
CE marked
17.5mm wide
Approvals: UL recognised component for Canada and US
Functions - 111, 421, 611, 612
Contact rating (res); stock no 329-137 ; 8A @ 250Vac, stock no
329-222 ; 5A @ 240Vac
75 mm
27 mm
53.5 mm
Contact
Configuration
M1DFD
11 Pin Timer - XM Series
Height
Width
Depth
Manu. Part
No.
S$
S$
S$
1+ 106·50
1+ 126·50
6+ 99·00
6+ 117·50
12+ 97·00
12+ 115·00
89 mm Contact Rating - Resistive Load
59 mm Time Range
SPDT
Supply Voltage
(V ac)
Stock no.
Price
per
OM
S$
24 Vac/dc; 230
24 Vac/dc; 110
330-6654
331-5737
unit
unit
1+
1+
64·00
64·00
8 A @ 250 V ac
0.5 s → 60 min
S$
6+
6+
59·00
59·00
S$
12+
12+
57·50
57·50
M1SMT
XMW Series
Functions – 111,121,142,211,421,451
Can also be surface mounted
CE marked
17.5mm wide
Functions - 111,211,421,451,612
Used for control applications or for direct switching of light loads
LED indication of output relay energisation
27mm wide
Standards: EN50081-1, EN50082-2
Height
Depth
Contact Configuration
Contact Configuration SPDT
Contact Rating - Resistive Load 8 A @ 240 V ac
Supply Voltage
10.5 → 265 Vac/dc
Supply Voltage (V
ac)
89 mm Contact Rating - Resistive Load
59 mm Time Range
SPDT
Stock no.
Price
per
OM
S$
340-4900
340-5802
unit
unit
1+
1+
80·00
80·00
24 Vac/dc; 230
24 Vac/dc; 110
Manu. Part No. Time Range
XMW-D1-H
XMW-D1
Stock no.
0.6 min → 60 h
0.6 s → 60 min
Price per
224-1297
308-0784
OM
unit
unit
S$
S$
S$
1+ 149·00
1+ 149·00
6+ 138·50
6+ 138·50
12+ 135·50
12+ 135·50
11 Pin Timer - XMW Series
Functions - 111, 211, 421, 451, 612
Height
Width
Depth
Contact Configuration
10.5 → 265 Vac/dc
8 A @ 240 V ac
0.6s → 60m
75 mm Supply Voltage
27 mm Contact Rating - Resistive Load
53.5 mm Timer Range
SPDT
Manu.
Part No.
Stock no.
Price
per
XMW-S1
308-0790
unit
OM
S$
S$
S$
1+ 132·00
6+ 123·00
12+ 120·00
8 A @ 250 V ac
0.5 s → 60 min
S$
6+
6+
73·50
73·50
S$
12+
12+
72·00
72·00
M3RTM
Functions - 411, 651
Two independent timer ranges for On/Off times and setting potentiometers
LED indications for supply and relay status
DIN rail or surface mount
CE Compliant
0.24 s → 10 h
24 → 240 Vac/dc
DPDT
8 A @ 250 V ac
Time Range
Supply Voltage
Contact Configuration
Contact Rating - Resistive Load
Manu.
Part No.
Stock no.
Price
per
M3RTM
328-140
unit
OM
Height
Width
Depth
89 mm
35 mm
59 mm
S$
S$
S$
1+ 151·00
6+ 140·50
12+ 137·50
Chronos 2
XW Series
3 wire sensor control option
1 LED status indicator
AgNi contact material
17.5mm wide
Functions - 211, 451, 511, 521
Used for control applications or for direct switching of light loads
LED indication of output relay energisation
27mm wide
Standards: EN50081-1, EN50082-2
Height
Depth
81 mm
60 mm
Contact Configuration SPDT
Contact Rating - Resistive Load 8 A @ 240 V ac
0.6 s → 60 min
Supply Voltage
10.5 → 265 Vac/dc Time Range
Manu.
Part No.
Stock no.
Price
per
XW-D-1
341-389
unit
OM
S$
S$
S$
1+ 148·00
6+ 137·50
12+ 134·50
11 Pin Timer - XW Series
Functions - 211, 451, 511, 521
Contact rating (res); stock no 329-200 ; 8A @ 250Vac, stock no
329-238 ; 5A @ 240Vac
Height
Width
Depth
1350
75 mm
27 mm
53.5 mm
Supply Voltage
Timer Range
OM = Order Multiple
12 → 240 Vac/dc
0.6s → 60m
Manu.
Part No.
Contact
Configuration
88 826 105
SPDT
88 826 103
SPDT
88 82 65 03
SPDT
88 826 185
SPDT
88 826 004
SSR
Supply
Voltage
Contact Rating
Timer Function
Time
- Resistive
Range
Load (V ac)
8 A @ 250
Multifunction: 111, 131, 451, 1 s →
24 Vdc; 24
211, 421, 441, 611, 612, 191, 521 100 h
→ 240 V ac
12 → 240
8 A @ 250
Multifunction: 111, 131, 451, 1 s →
Vac/dc
211, 421, 441, 611, 612, 191, 521 100 h
12 → 240
8 A @ 250
Multifunction: 111, 131, 451, 0.1 s →
Vac/dc
211, 421, 441, 611, 612, 191, 521 120 h
24 Vdc; 24
8 A @ 250
Multifunction
0.1 s →
→ 240 V ac
100 h
24 → 240 V 0.7 A @ 250 Multifunction: 111, 131, 451, 1 s →
ac
211, 421, 441, 611, 612, 191, 521 100 h
Stock no.
331-0928
331-0934
385-6957
363-1269
331-0940
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
11 Pin Timer - TMR48U
Manu. Part No.
Model No
88 826 105
88 826 103
88 82 65 03
88 826 185
88 826 004
MUR1
MUR3
MURc3
MXR1
MUS2
Stock no.
331-0928
331-0934
385-6957
363-1269
331-0940
Price per
OM
unit
unit
unit
unit
unit
S$
S$
1+ 74·50
1+ 103·00
1+ 92·50
1+ 107·50
1+ 83·00
6+ 70·00
6+ 97·00
6+ 87·00
6+ 101·00
6+ 78·00
S$
12+
12+
12+
12+
12+
68·50
95·00
85·00
99·00
76·50
Chronos 2 - PU2R
Functions 111,131,191,211,421,441,451,521,611,612
3 wire sensor control option
Electrical life: 100000 operations at rated load
Approvals: UL, CSA
Standards: IEC 1812-1, EN 50081-2, EN 50082-2.
Number of Pins
Height
Width
Depth
Contact Configuration
Stock no.
331-1000
11
45 mm
35 mm
78 mm
DPDT
Price per
OM
467-6869
8 A @ 250 V ac
± 0.5 mm
1 s → 100 h
12 → 240
12 → 240
S$
S$
S$
1+ 153·00
6+ 144·00
12+ 141·00
Stock no.
DIN Rail Socket
215-5449
Price per
unit
OM
S$
1+
8·85
8·15
S$
50+
7·95
Chronos 2 TUR3 / TU2R1
Functions - 111, 131, 191, 211, 421, 441, 451, 521, 611, 612
Option of connecting an external power supply to the control input
3-wire sensor control option
LED status indicator
Stock no. 331-0984 has an additional, instantaneous contact
Standards: Conforms to IEC 1812-1, EN50081-1/2, EN50082-1/2
Height 78 mm
Flame Retardant Case
Width 22.5 mm Contact Rating - Resistive Load
Depth 95 mm
Time Range
Contact
Supply Voltage
Mounting
Configuration
Type
SPDT
12 → 240 Vac/dc
Din rail
DPDT
24 Vdc; 24 → 240 V ac Din rail
Manu. Part
No.
Contact
Configuration
88 865 103
88 865 305
SPDT
DPDT
Price
per
331-0978
331-0984
unit
unit
OM
467-6875
S$
S$
S$
1+ 105·50
1+ 128·00
6+ 99·00
6+ 119·00
12+ 97·00
12+ 116·50
Multifunction, multi-range and multi-voltage timers for assembly on DIN
rail.
Timer range 0-1 s, 0-10 s, 0-1 min, 0-10 min, 0-1 hr, 0-10 hr and 0-100 hr.
Function and range selection by rotary switch.
Timer display by button.
Self-extinguishing casing.
Standards: IEC 1812-1, EN 50081-1/2, EN 50082-1/2, UL, CUL
recognised
Breaking
capacity:
331-0962
OM
unit
8A AC / DC
S$
S$
S$
1+ 112·50
Height
48 mm
Supply Voltage
Width
48 mm
Depth
Contact
Configuration
90.2 mm
SPDT
Contact Rating Resistive Load
Time Range
Price per
unit
45 x 45
5 A @ 230 V ac
0.02 s → 300 h
OM
S$
S$
S$
1+ 117·00
5+ 114·00
10+ 111·00
Accessories
Manu. Part No.
AZ58
Stock no.
403-853
1+ 150·50
5+ 147·00
10+ 143·00
849-445
Price per
unit
S$
S$
S$
1+ 255·00
6+ 235·00
24 V ac/dc; 110 →
240 V ac
8A
0.01 s → 999.9 h
OM
48 mm
Supply Voltage
Width
48 mm
Depth
Contact
Configuration
90.2 mm
SPDT
Contact Rating Resistive Load
Time Range
Stock no.
849-451
Price per
unit
24 Vac/dc, 110 →
240 V ac
8A
0.01 s → 999.9 h
OM
S$
S$
1+ 255·00
6+ 235·00
S$
Digital LCD timer relays Timer 814
Height 48 mm Panel Cut Out
Width 48 mm Contact Rating - Resistive Load
Depth 80 mm Time Range
467-6897
Stock no.
Height
88 857 105
Function 111
8 pin
Panel or base mount
2 LED status indicators
Precision timing by micro-controller
Stock no.
S$
Functions - 111,211,421,451,611,612
4 digit
Four button time setting, 2 line display, actual time shown
alongside set time
Symbols indicate function, status of output relay and power input
Programme change inhibit switch on side of the timer case
Lithium battery back-up
8mm character height
Approvals: UL, CSA
Electronic - TMR48A
88 886 106
S$
Functions - 111,211,421,451,611,612
4 digit
Four button time setting, 2 line display, actual time shown
alongside set time
Symbols indicate function, status of output relay and power input
Programme change inhibit switch on side of the timer case
Lithium battery back-up
8mm character height
Approvals: UL, CSA
Manu. Part No.
Manu. Part No.
S$
814 Series, 11 Pin, LCD
Max. voltage: 250 Vac/dc
Protection index: IP 50 (front side)
Operating
–20 °C → +60 °C
temperature:
Supply Voltage 12 → 240 V ac
Range (Vac)
Price per
S$
10+ 111·00
OM
unit
88 857 005
Max. current:
Stock no.
S$
5+ 114·00
48 mm
48 mm
80 mm
12 → 24 Vdc; 24 → 240 V ac
2 x SPDT
5 A @ 230 V ac
0.02s → 300h
Price per
Manu. Part No.
Timer range:
2000 VA / 80 W
S$
1+ 117·00
814 Series, 8 Pin, LCD
Chronos 2 Series Multifunction
Timers
0 → 1 sec, 0 → 10 sec, 0 → 1 min, 0 →
10 min, 0 → 1 hr, 0 → 10 hr and 0 → 100
hr
Multi-function A-At-B-C-H-Ht-Di-D-Ac-Bw
Relay output: 1 C/O or 2 C/O
Contact material:Ag Ni
OM
Height
Width
Depth
Supply Voltage
Contact Configuration
Contact Rating - Resistive Load
Timer Range
Stock no.
Yes
8 A @ 250 V ac
0.1 s → 100 h
Manu. Part
Stock no.
No.
88 865 103
331-0978
88 865 305
331-0984
Stock no.
Price per
unit
56
Functions:111(2 contacts),161,421 (instantaneous contacts), 421 (2
contacts), 611,612,711,712
Panel or base mount
2 LED status indicators
Precision timing by micro-controller
S$
15+
48 mm
48 mm
80 mm
12 → 24 Vdc; 24 → 240 V ac
2 x SPDT
5 A @ 230 V ac
0.02s → 300h
8 Pin Timer - TMR48X
Accessories
Description
Height
Width
Depth
Supply Voltage
Contact Configuration
Contact Rating - Resistive Load
Timer Range
Stock no.
Contact Rating - Resistive Load
Repeat Accuracy
Time Range
Supply Voltage (Vac)
Supply Voltage (Vdc)
unit
Functions: 211,212,511,521,661
Panel or base mount
2 LED status indicators
Gate inhibit on all timing functions
Precision timing by micro-controller
Price per
unit
OM
S$
1+
6·85
S$
25+
6·40
S$
100+
6·25
Digital electronic timer relays, multi-range
from 0.01 sec → 9999 hrs in DIN format
48 x 48, with very good LCD reading, easy to
use (encoding wheel principle), and connection by undecal base.
Timer range: 99.99 s; 999.9 s;
9999 sec; 99 min 59 sec; 99.99 min; 999.9 min;
9999 min; 99 hours 59 min; 99.99 hours; 999.9 hours; 9999 hours.
Operates from 88 857 105: power-up delay (A),
calibrator (B), timing on opening (C),
flashing (D and Di), time delay on power-up (H).
Timed changeover relay output.
Support to be ordered separately:
- Decal support for refs. 88 857 105 and 88 857 103 stock no.
509-1219.
- Octal support for reference 88 857 005
stock no. 278-7226.
Standards: Protection class NFC 20010 IEC 529-DIN 40050 and
IEC 255, VDE 0435-2021
Visit our website for additional price information and exciting promotions
1351
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Counters, Timers & Hour Meters
Description
24 Vac / Vdc 110 → 240 Vac (849-451 and 542-6637)
12 Vdc / 24 → 48 Vac / Vdc (305-5817)
Display capacity:
4 digits (height 8 mm)
Accuracy:
±0.03% ±20 ms
Min. pulse:
50 ms
Reset time
- timing: 50 ms
- non timing: 50 ms
Output:
8A AC / DC
Breaking capacity:
2000 VA, 190 W
Minimum current:
100mA
<0.015 sec
Resistance to power line disturbances:
Panel cut-out (mm):
45 x 45
Protection index:
IP 65
Operating temperature:
–10 °C → +60 °C
Material:
fire resistance UL 94-V0
Fixing:
bracket / on base
Dimensions (mm):
48 x 48 x 70.4
Weight:
100 g
Product Index
Multifunction
IP Rating
IP 65
Time Range
0.01 sec → 999.9 hr
Series
814
Output Contacts
1 C/O
RS Timer
Supply Voltage
Connection
Manufacturer Timer
Stock no.
Function
Type
Function
111, 131
24 Vac / dc; 110 → 240 V
8 pins
A, At
542-6637
ac
11 pins
A, At
305-5817
111, 132
12 Vdc, 24 → 48 Vac / dc
Stock no.
Price
per
OM
S$
159-600
450-4742
unit
unit
1+
1+
90·00
76·00
Supply voltage:
56
Supply Voltage
Stock no.
24 Vac / dc; 110 → 240 V ac
12 Vdc, 24 → 48 Vac / dc
Price per
a542-6637
a305-5817
unit
unit
OM
S$
1+
1+
301·00
291·00
S$
4PCO 110 Vac
4PCO 230 Vac
Description
Stock no.
DIN rail skt, Clamp terms.
DIN rail skt, Screw terms.
446-0327
Price per
OM
S$
1+
94·50
S$
6+
87·00
S$
12+
0.1 s → 24 h
1 A @ 250 V ac
≤ 50 ms
Price
per
80.71.0.240.0000
159-593
unit
OM
Height
Width
Depth
S$
S$
S$
1+ 119·50
6+ 110·00
12+ 107·50
Height
80 mm Supply Voltage
Depth
70 mm Contact Rating - Resistive Load
Contact Configuration SPDT Time Range
82.01.0.240.0000
385-6913
S$
15+
15+
9·60
10·30
S$
50+
50+
9·40
9·90
12+
72·00
25+
25+
9·90
10·00
8 timing functions - 111,191,211,421,451,511,521,611
For use with dedicated 8 and 11 pin DIN rail sockets
7 time scales
LED status indicator
Protected, but accessible, function and time scale setting
switches
Suitable relays are 350-585 (8 pin) typically and 350-670
(11 pin) typically
Note: The coil voltage of the chosen relay will determine the
operating voltage of the timer module
Height
Width
Depth
38 mm
16.8 mm
54 mm
12 → 240 Vac/dc
± 1 mm
0.05 s → 100 h
Supply Voltage
Repeat Accuracy
Time Range
Stock no.
Price per
454-7137
OM
S$
1+
80·00
unit
S$
6+
73·50
15+
15+
10·00
10·30
S$
Stock no.
454-7143
454-7159
Price per
OM
S$
1+
1+
10·90
11·10
unit
unit
S$
S$
Price per
S$
1+
98·00
unit
90·00
Size
Manufacturer Timer Function
RS Timer Function
15.5 x 11.3 x 31 mm
AI,Di
111,421
Manu. Part No. Supply Voltage
Stock no.
Price
per
OM
S$
86.30.0.024.0000 12 → 24 Vac/dc
86.30.8.120.0000 110 → 125 V ac
86.30.8.240.0000 230 → 240 V ac
159-458
666-7952
666-7955
unit
unit
unit
1+
1+
1+
47·20
53·00
53·00
S$
6+
6+
6+
43·40
48·80
48·80
S$
12+
12+
12+
42·50
47·70
47·70
Manu. Part
No.
Stock no.
Price
per
OM
S$
87.01.0240
385-6929
unit
1+
94·50
SPDT
24 → 48 Vdc; 24 → 240 V ac
8 A @ 250 V ac
S$
6+
S$
87·00
12+
85·00
87.82 Series
Functions - 111, 191, 211, 412, 421, 451, 511, 611
Timing can be regulated by an external potentiometer
2 timed contacts or 1 timed + 1 instantaneous contact
AgCdO contact material
22.5mm wide
S$
6+
Multifunction
86
0.05 s → 100 h
Height
78.8 mm
Contact Configuration
Depth
96 mm
Supply Voltage
Time Range 0.05 s → 60 h Contact Rating - Resistive Load
24 → 48 Vdc; 24 → 240 V ac
5 A @ 250 V ac
0.05 s → 10 h
OM
Type
Series
Time Range
Functions - 111, 191, 211, 412, 421, 451, 611
LED status indication
22.5mm wide
Approvals: C-UL, GL
Functions – 111,211,421,611
AgCdO contact material
17.5mm wide
Stock no.
10·40
11·10
87.01
88.8 mm
17.5 mm
60.8 mm
82.01 Series
Manu. Part No.
S$
1+
1+
85·00
Function - 111, 191, 211, 421, 451, 611
6 time ranges
High input/output isolation
Multi-voltage (24-240Vac/dc) output independent from the input voltage
17.5mm wide
Stock no.
OM
unit
unit
Functions - 111, 421
Timer module for use in conjunction with relay and socket
7 time ranges
LED status indicator
Note: For use with 40, 44, 46, 55, 60 & 62 series Finder relays
For use with 90, 92, 94, 95 & 97 series Finder sockets
80 Series - Solid State Multifunction
Timer
Manu. Part No.
81·00
68·50
86 Series - Dual Function Timer Module
12 → 240 Vac/dc
16 A @ 250 V ac
0.1 s → 20 h
unit
Time Range
Contact Rating - Resistive Load
Reset Accuracy
Price per
400-9146
403-263
90.02 8-pin Relay+Timer Socket
90.03 11-pin Relay+Timer Socket
84 mm Supply Voltage
59 mm Contact Rating - Resistive Load
SPDT Time Range
Stock no.
12+
10+
Accessories
Functions – 111, 421, 611, 211, 191 and 451
AgCdO contact material
17.5mm wide
80.01.0.240.0000
83·00
70·00
Multivoltage/Multifunction - Series
86.00 Timer Module
S$
80 Series
Manu. Part No.
6+
5+
S$
Accessories
Description
Height
Depth
Contact Configuration
S$
S$
12+
Height
78.8 mm
Contact Configuration
DPDT
Depth
96 mm
Supply Voltage
24 → 48 Vdc; 24 → 240 V ac
Time Range 0.05 s → 60 h Contact Rating - Resistive Load 8 A @ 250 V ac
88·00
Multifunction - 85 Series
Functions - 111, 412, 421, 611
Delay or timeout functions at power-on, configurable by DIL switch
LED indicator for power-on and output status
Height
Width
Depth
27.7 mm
20.7 mm
61.6 mm
Contact Rating - Resistive Load
Number of Pins
Repeat Accuracy
7 A @ 250 V ac
14
±2 ms
Description
Stock no.
Price
per
OM
S$
4PCO 12 Vac/
dc
4PCO 24 Vac/
dc
159-565
unit
1+
90·00
6+
83·00
12+
81·00
450-4736
unit
1+
76·00
5+
70·00
10+
68·50
1352
S$
S$
OM = Order Multiple a New product to range
Manu. Part No.
Stock no.
87.02.0.240.0000
511-7276
Price per
unit
OM
S$
S$
S$
1+ 162·00
6+ 149·00
12+ 146·00
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
11 Pin Timer, H3CR-A
Description
Functions - 143,211,453,521,611,612
LED indication of power and contact status
Note: Adaptor is not supplied and must be ordered separately see stock
number 342-916
Approvals: UL, CSA.
Standards: Conforms to EMC standards.
12-48V DPDT timer
100-240V DPDT timer
100-240V SPDT + instantaneous
output timer
Stock no.
Price
per
OM
S$
423-4998
423-4982
423-5008
unit
unit
unit
1+
1+
1+
54·00
53·00
78·00
S$
5+
5+
5+
50·00
49·30
72·50
S$
10+
10+
10+
49·10
48·20
71·00
4 & 8 Multifunction - H3DK-M/S Series
Height
(mm)
48
48
Width Depth Panel Cut Out
Contact
Contact Rating - Timer Range
(mm) (mm)
(mm)
Configuration Resistive Load (V ac)
48
87
44.8 x 44.8
DPDT
5 A @ 250
0.05s →
300h
48
87
44.8 x 44.8
DPDT
5 A @ 250
0.05s →
300h
Supply Voltage (ac-dc)
Stock no.
24 → 48 Vac; 12 → 48 Vdc
100 → 240 Vac; 100 → 125
Vdc
Price per
113-8128
113-8134
OM
unit
unit
Stock no.
113-8128
113-8134
S$
S$
S$
1+ 121·00
1+ 110·00
15+ 118·60
15+ 107·80
25+ 116·20
25+ 105·60
Product Index
Time Range
Accessories
Description
Stock no.
Panel Mount Adaptor
DIN Rail Surface Mount Base
11 Pin, Back Connecting
Socket
Price per
342-916
342-922
188-4562
unit
unit
unit
OM
S$
1+
1+
1+
3·70
16·60
12·00
S$
15+
15+
3·63
16·30
S$
25+
25+
3·60
16·00
5A
0.05 s → 300 h
Manu. Part No.
H3CR-A8 AC24-48/DC12-48
H3CR-A8 AC100-240/DC100-125
H3CR-A8E AC/DC24-48
Stock no.
328-364
328-358
328-386
100 → 125 Vdc; 100 → 240 V ac H3CR-A8E AC100-240/DC100-125
Contact Configuration
Stock no.
Price
per
DPDT
DPDT
SPDT (Timed) + SPDT
(Instantaneous)
SPDT (Timed) + SPDT
(Instantaneous)
328-364
328-358
328-386
328-370
OM
328-370
S$
S$
S$
unit
unit
unit
1+ 130·00
1+ 80·00
1+ 80·00
6+ 127·40
6+ 78·40
6+ 78·40
12+ 124·80
12+ 76·80
12+ 76·80
unit
1+
6+
12+
77·00
75·50
74·00
Accessories
Stock no.
8 Pin DIN Rail Socket
Panel Mount Adaptor
329-468
342-916
Price per
unit
unit
OM
S$
1+
1+
10·30
3·70
S$
6+
15+
10·10
3·63
Solid State Multifunction Timer H3CR-A8
Series
A 1⁄16 DIN solid state multi-function timer
Functions 111, 411, 421, 611
Nine timing ranges from 0.005s to 300h
Power indicator, output indicator, operating mode display
Relay output rated 250Vac 5A
Conforms to EN61812-1 (VDE0435/P2021) and EN60664-1 (VDE0110)
4kV/2
Approvals: UL, CSA, Lloyds, NK
Timing functions
Timing range
Terminals
Supply voltage (423-4982, 423-5008)
Supply voltage (423-4998)
Operating temp. range
Mechanical life (no load)
Electrical life
Output (423-4982, 423-4998)
Output (423-5008)
A, B2, E, J
0.05s to 300h
8 pin Octal style
100-240Vac, 100-125Vdc
24-48Vac, 12-48Vdc
-10°C to +55°C
20x106 operations min.
10 x 104 operations min.
Relay DPDT
Relay SPDT + SPDT Instantaneous
Key to timing functions
A: ON-delay
B2: Flicker ON Start
E: Interval
J: One-shot
111 On delay
611 Sym. recycler, pulse start
421 On pulse
411 Delayed pulse
Cross reference to Manufacturers Part No.
Stock no
423-4998
423-4982
423-5008
56
24 → 240 Vac/dc
Output Contacts
SPDT
DPDT
SPDT
DPDT
Stock no.
Price
per
OM
S$
a733-4956
unit
1+
98·00
a733-4959
unit
1+
70·60
a733-4953
unit
1+
60·80
a733-4962
unit
1+
98·00
Stock no.
733-4956
733-4959
733-4953
733-4962
S$
S$
Tamper Proof - H3DS Series
Supply Voltage
12 → 48 Vdc; 24 → 48 V ac
100 → 240 V ac
24 → 48 Vac/dc
Description
Supply Voltage
RS Timer Function
141, 191, 211, 451, 521 + 3 non RS
141, 191, 211, 451, 521 + 3 non RS
143, 451 + 2 non RS
143, 451 + 2 non RS
SPDT Multifunction Timer,24240Vac/dc
DPDT Multifunction Timer,24240Vac/dc
SPDT Multifunction Timer,24240Vac/dc
DPDT Multifunction Timer,24240Vac/dc
Functions - 111,453
LED indication of power and contact status
44.8 x 44.8mm panel cut out
Conforms to EMC standards
Note: Panel mount adaptor and DIN rail socket are sold separately (see
accessories).
Approvals: UL, CSA
Height 48 mm Contact Rating - Resistive Load
Width 48 mm Timer Range
Depth 87 mm
Multifunction Timer
0.1 s → 1200 h
Description
8 Pin Multifunction Timer, H3CR - A8
Contact Configuration
DPDT
DPDT
SPDT (Timed) + SPDT
(Instantaneous)
SPDT (Timed) + SPDT
(Instantaneous)
Multiple time ranges and operating modes let
you cover a wide range of applications
The time limit DPDT output contacts can be
changed to time limit SPDT and instantaneous SPDT output contacts
using a switch Sequence checks are easily performed by setting an
instantaneous output to zero
Start signal control for the H3DK-M
DIN rail track mounting
Power reset: Minimum power-OFF time: 0.1 s
Insulation resistance: 100 MΩ min. at 500 Vdc
Protection class rating: IP30 (Terminal block: IP20)
Approvals: CE, cURus, CCC, LR
Omron part no
H3CR-A8 AC24-48/DC12-48
H3CR-A8 AC100-240/DC100-125
H3CR-A8E AC100-240/DC100-125
S$
12+
25+
9·90
3·60
Functions: 111,414. 365-6987 also has functions 191 and 211
7 timing ranges covering 0.1s to 120h
Meets current European legislation for EMC and LVD
17.5mm wide
Stock no. 365-6987 also has additional functions: 211,191
These timers require the use of setting tool 365-7025
Approvals: UL & CSA
Height
Depth
Contact Configuration
Supply Voltage
Contact Rating - Resistive Load
Time Range
80 mm
68 mm
SPDT
24 → 48 Vdc; 24 → 230 V ac
5 A @ 250 V ac
0.1 s → 120 h
Manu. Part No.
Stock no.
H3DS-ML AC/DC
H3DS-SL AC/DC
365-6987
365-6993
Price per
unit
unit
OM
S$
1+
1+
68·90
62·60
S$
6+
6+
67·60
61·40
S$
12+
12+
66·20
60·10
Ultra-slim Multifunction Relay Timer H3RN
Functions - 143, 421, 611, 612 (for explanation of these
functions please refer to introductory pages in the
’Timers’ section)
Ultra slim 13mm design, for G2R relay socket
Dimensions W46mm, D13mm, H29mm
Creepage and Clearance 1.5 mm; 2.5 mm
Operating Accuracy +/- 1% FS max
Switching Voltage 250 Vac
Approvals: UL recognised component, CSA certified
Standards: EN61812-1
Electrical Life
100 x 103
Setting Error
Mechanical Life
1 x 107
Switching Current
Operating Temperature Range
-10 → +55 °C
Reset Time
Manu. Part No. Coil Voltage Number of Pins Contact Configuration
H3RN-1 12DC
12 Vdc
5
SPDT
H3RN-1 24DC
24 Vdc
5
SPDT
H3RN-11 12DC
12 Vdc
5
SPDT
H3RN-11 24DC
24 Vdc
5
SPDT
H3RN-2 12DC
12 Vdc
8
DPST
H3RN-2 24DC
24 Vdc
8
DPST
Manu. Part No.
Stock no.
H3RN-1 12DC
H3RN-1 24DC
H3RN-11 12DC
H3RN-11 24DC
H3RN-2 12DC
H3RN-2 24DC
236-1155
236-1161
236-1183
236-1199
236-1228
236-1234
Price per
unit
unit
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
1+
1+
50·60
52·50
52·50
52·50
52·50
52·00
OM
S$
1+
1+
3·78
3·78
+/-15% +/-50 ms FS max %
3A
0.1 s
Timer Range
Stock no.
236-1155
0.1 s → 10 min
0.1 s → 10 min
236-1161
236-1183
0.1 min → 10 h
0.1 min → 10 h
236-1199
236-1228
0.1 s → 10 min
0.1 s → 10 min
236-1234
S$
6+
6+
6+
6+
6+
6+
49·60
51·50
51·50
51·50
51·50
51·00
S$
12+
12+
12+
12+
12+
12+
48·60
50·40
50·40
50·40
50·40
50·00
Accessories
Description
PCB Socket, SPCO,5 pin,10A
PCB Socket, DPCO,8 pin,5A
New products available online every week
Stock no.
353-950
353-972
Price per
unit
unit
S$
10+
10+
3·71
3·71
S$
25+
25+
3·70
3·70
1353
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Counters, Timers & Hour Meters
Description
Stock no.
DIN Socket, SPCO,5 pin,10A
DIN Socket, DPCO,8 pin,5A
PCB Mounting Socket, SPDT
Busbar
353-944
353-966
260-4446
329-7320
Price per
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
8·90
7·10
6·50
13·20
S$
10+
15+
15+
15+
8·80
7·00
6·40
13·00
S$
25+
25+
50+
25+
8·60
6·90
6·30
12·70
H3YN - DPDT
56
8
28 mm
21.5 mm
63 mm
Panel Cut Out
Contact Configuration
Repeat Accuracy
Stock no.
0.1s-10min, 24Vac
0.1s-10min, 200-230Vac
0.1s-10min, 24Vdc
0.1min-10h, 100-120Vac
0.1min-10h, 200-230Vac
0.1min-10h, 24Vdc
236-1307
236-1313
236-1290
349-1291
236-1357
236-1335
Price per
unit
unit
unit
unit
unit
unit
Stock no.
DIN rail/surface mtg skt 8-pin
803-376
Price per
unit
Price per
687-6106
687-6103
687-6112
687-6115
687-6092
687-6128
687-6109
687-6096
687-6121
unit
unit
unit
unit
unit
unit
unit
unit
unit
Input Type
NPN
NPN / PNP
NPN / PNP
NPN / PNP
NPN
NPN / PNP
NPN / PNP
OM
S$
1+
1+
1+
1+
1+
1+
1+
1+
1+
198·00
180·00
180·00
198·00
340·00
200·00
180·00
198·00
198·00
Size (mm)
48 x 48 x 63.7
48 x 48 x 63.7
48 x 48 x 78
48 x 48 x 78
48 x 48 x 63.7
48 x 48 x 63.7
48 x 48 x 63.7
OM
S$
1+
1+
1+
1+
1+
1+
50·40
48·40
76·00
78·00
50·40
50·40
OM
S$
1+
10·00
Stock no.
236-1307
236-1313
236-1290
349-1291
236-1357
236-1335
S$
S$
S$
6+
6+
6+
6+
6+
6+
49·40
47·50
74·50
76·50
49·40
49·40
S$
S$
12+
12+
12+
12+
12+
12+
S$
15+
9·80
Functions - 111, 141 ,211, 421, 432, 451, 452, 612
Self-extinguishing housing
Height
Width
Depth
Contact Configuration
64 mm
70 mm
22.5 mm
SPDT
1 s → 10 d
Yes
110 → 240
8 A @ 250 V ac
Time Range
Flame Retardant Case
Supply Voltage Range (Vac)
Contact Rating - Resistive Load
S$
48·40
46·50
73·00
74·90
48·40
48·40
S$
25+
9·60
H3YN - 4PDT
Manu. Part No.
Stock no.
D6DM
321-6422
Price per
OM
S$
1+
94·00
unit
6+
87·50
8 and 16 Function - Delta D6M/
D12M
Functions - 111,141,211,421,432,451,452,612
LED status indication
Manu. Part No.
Depth
Height
Width
Flame Retardant Case
Functions - 143,453,611,612
Multiple functions, multiple time
ranges
Electrical life: 200000 operations at
rated load
Approvals: UL, CSA
Standards: VDE0435/P2021, EN
50081-2, EN 50082-2
Stock no.
436-2289
D6M-RS
22.5 mm
64 mm
70 mm
Yes
12 → 240 Vac/dc
5 A @ 250 V ac
SPDT
1 s → 10 d
Supply Voltage
Contact Rating - Resistive Load
Contact Configuration
Time Range
Price per
OM
unit
S$
S$
1+ 108·00
6+ 100·50
S$
12+
98·50
Enya Series - E1ZM
Height
Width
Depth
Contact Configuration
Time Range
0.1 s → 10 min
0.1 s → 10 min
0.1 s → 10 min
0.1 s → 10 min
0.1 min → 10 h
28 mm
21.5 mm
63 mm
4PDT
Description
Contact Rating - Resistive Load
Number of Pins
Repeat Accuracy
Panel Cut Out
Supply Voltage
24 Vac
24 Vdc
100 → 120 Vac
200 → 230 Vac
200 → 230 Vac
Stock no.
0.1s-10min, 24Vac
0.1s-10min, 24Vdc
0.1s-10min, 100-120Vac
0.1s-10min, 200-230Vac
0.1min-10h, 200-230Vac
236-1391
236-1385
349-1308
236-1408
236-1458
Price per
unit
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
1+
58·10
50·20
50·20
50·20
53·80
OM
S$
1+
1+
12·90
14·30
3 A @ 250 V ac
14
± 1 mm
25.8 x 21.4 mm
Stock no.
236-1391
236-1385
349-1308
236-1408
236-1458
S$
6+
6+
6+
6+
6+
57·00
49·20
49·20
49·20
52·80
S$
12+
12+
12+
12+
12+
55·80
48·20
48·20
48·20
51·70
Accessories
Description
Stock no.
DIN rail/surface mtg skt 14-pin
DIN Socket and 2 x Clips
403-285
451-7726
Price per
unit
unit
S$
15+
15+
12·70
13·30
S$
25+
25+
12·40
13·00
Ultra Compact Digital Timer - H5CX
Series
Shorter body depth
Display colour can be switched between red, green and orange
(status monitoring)
Up/Down keys for each digit
Twin Timer and Variable ON/OFF duty modes
Service Life Notification - The number of times that the control output
turns ON is counted and an alarm is displayed when a preset count is
exceeded
12mm character height
Setting Upper Limit prevents unwanted operation
Isolated power supply and input circuits (Prevent unwanted circuit
paths) on 100-240Vac versions
RS Timer Function 131,132,141,143,211,453,612 Manufacturer Timer Function A, A-1, A-2, A-3, b, b-1, d, E, F, Z, S
Time Range
0.001 s → 9999 h
Series
H5CX
IP Rating
IP66
Supply Voltage
Output Contacts
Connection Type Input Type
Size (mm)
Stock no.
SPDT
Screw Terminal NPN / PNP 48 x 48 x 59
687-6106
12 → 24 Vac/dc
SPDT
8 pin
NPN
48 x 48 x 63.7
687-6103
12 → 24 Vac/dc
1354
Stock no.
687-6112
687-6115
687-6092
687-6128
687-6109
687-6096
687-6121
Delta D6DM
Accessories
Description
Connection Type
8 pin
11 pin
Screw Terminal
Screw Terminal
8 pin
11 pin
11 pin
Stock no.
H5CX-AD-N screw term
H5CX-L8D-N 8-pin
H5CX-L8SD-N 8-pin
H5CX-A11SD-N 11-pin
H5CX-A-N screw term
H5CX-AS-N screw term
H5CX-L8-N 8-pin
H5CX-A11-N 11-pin
H5CX-A11S-N 11-pin
25.8 x 21.4 mm
DPDT
Supply Voltage (Vac)
24
200 → 230
–
100 → 120
200 → 230
–
Description
Output Contacts
SPST transistor
SPST transistor
SPDT
SPST transistor
SPDT
SPDT
SPST transistor
Description
Functions - 143,453,611,612
Multiple functions, multiple time
ranges
Electrical life: 500000 operations at
rated load
Approvals: UL, CSA
Standards: VDE0435/P2021, EN
50081-2, EN 50082-2
Number of Pins
Height
Width
Depth
Time Range
0.1 s → 10 min
0.1 s → 10 min
0.1 s → 10 min
0.1 min → 10 h
0.1 min → 10 h
0.1 min → 10 h
Supply Voltage
12 → 24 Vac/dc
12 → 24 Vac/dc
100 → 240 V ac
100 → 240 V ac
100 → 240 V ac
100 → 240 V ac
100 → 240 V ac
OM = Order Multiple a New product to range
Functions - 111, 141, 211, 421, 451, 452, 612
Installation design
7 time ranges
Wide voltage range
17.5mm wide
50 ms → 100 h
8 A @ 250 V ac
SPDT
60 mm
87 mm
Time Range
Contact Rating - Resistive Load
Contact Configuration
Depth
Height
Supply Voltage
(Vac/dc)
12 → 240
24 → 240
Stock no.
Price
per
160-284
160-290
unit
unit
OM
S$
1+ 103·50
1+ 88·50
S$
6+
6+
95·00
81·50
S$
12+
12+
93·00
79·50
Enya series - E1ZMQ
Functions - 111, 211, 421, 612
Installation design
7 time ranges
Wide voltage range
17.5mm wide
Supply Voltage
Time Range
Contact Rating - Resistive Load
Contact Configuration
Depth
Height
Stock no.
160-262
Price per
unit
24 → 240 Vac/dc
50 ms → 100 h
8 A @ 250 V ac
SPDT
60 mm
87 mm
OM
S$
1+
61·50
S$
6+
57·00
S$
12+
56·00
12+
85·50
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
Enya Series - E3ZM20
11 Pin Multifunction Electromechanical Timers
Functions - 111,411,421,612 (with instantaneous contact and
special function)
Stock nos. 346-479 and 346-463 have time and range settings on
the front panel
Stock nos. 329-266, 329-272 and 329-288 require time and range
settings to be pre-set before installation
45 x 45mm panel cut out
Note: For function 141 the timer motor should be continuously
connected to the power supply, the time sequence can be controlled
by energising the clutch only.
For function 132 the clutch should be energised continuously and timing controlled by energising/deenergising the motor only. Reset is achieved by de-energising the clutch.
Approvals: UL.
Functions - 111, 141, 211, 421, 451, 452, 612
Installation design
7 time ranges
Wide voltage range
35mm wide
12 → 240 Vac/dc
50 ms → 100 h
8 A @ 250 V ac
Supply Voltage
Time Range
Contact Rating - Resistive Load
Stock no.
160-307
Price per
OM
unit
Contact Configuration
Depth
Height
DPDT
60 mm
87 mm
S$
S$
S$
1+ 126·50
6+ 116·50
12+ 114·00
Enya Series - E3ZI20
Size
Contact Configuration
Functions - 191, 411 (with 2x independent time ranges), 413, 432, 521
(with 2x independent time ranges), 651, 652
Installation design
Wide voltage range
35mm wide
12 → 240
50 ms → 100 h
8 A @ 250 V ac
DPDT
60 mm
87 mm
Supply Voltage (ac-dc)
Time Range
Contact Rating - Resistive Load
Contact Configuration
Depth
Height
Stock no.
160-199
Price per
OM
unit
S$
S$
1+ 126·50
6+ 116·50
12+ 114·00
Supply Voltage
(Vac)
124.5
124.5
100
100
100
110
240
24
110
240
Contact Configuration
Depth
Height
Height
Width
Depth
Contact Configuration
160-234
Price per
OM
unit
DPDT
103 mm
90 mm
S$
S$
1+ 160·50
6+ 147·50
S$
Manu. Part No.
Stock no.
G2ZMF11 24-240VAC/DC
Contact Configuration
Depth
Height
Price per
160-228
unit
OM
DPDT
103 mm
90 mm
S$
S$
1+ 198·00
6+ 182·00
S$
Stock no.
160-206
Price per
OM
unit
a714-0026
Price per
unit
1+
1+
1+
1+
1+
198·50
200·00
157·50
157·50
157·50
6+
6+
6+
6+
6+
S$
182·50
184·00
145·00
145·00
145·00
Supply Voltage Range
Contact Rating - Resistive Load
Time Range
OM
S$
1+
435·00
110; 220 Vac
5 A @ 250 V ac
0.1 s → 99.59 h
S$
6+
S$
405·00
33 mm
75 mm
69 mm
DPDT
12 → 24 Vac/dc
8 A @ 240 V ac
0.1 s → 99.59 h
Supply Voltage
Contact Rating - Resistive Load
Time Range
Price per
OM
unit
S$
S$
1+ 187·50
6+ 176·50
S$
Contact Configuration
Depth
Height
S$
1+ 147·50
6+ 135·50
Functions - 308-1579 : 161,211,411,454,661,662. 308-1585 :
211,411,454,661,662
IP65 (Front Face)
Timer may be externally started or the start input may be used as
a reset
4 timing ranges
45 x 45mm panel cut out
Standards: EN 50081-1, EN 50082-1, EN 61010-1
DPDT
103 mm
90 mm
S$
DPDT
Supply Voltage90 → 265 Vac/dcContact Configuration
Height
48 mm
Contact Rating - Resistive Load 8 A @ 240 V ac
Width
48 mm
Time Range
0.1 s → 99.59 h
Depth
132 mm
Flexible functionality with wide range applications
Tamper proof with key lock function
Selectable up/down counting modes - to show elapsed/
remaining time
3 Digit LCD for preset time and run time
Clear LED indication of relay status
Approvals: CE, UL
Stock no.
unit
unit
unit
unit
unit
S$
Four Digit 2 Line
S$
Multifunction
0.1 s → 999 h
8 A @ 240 Vac
76 mm
89 mm
Eliro
Height
Width
Depth
Contact Configuration
237-8793
Digital Time Delay Relay
Product Index
Time Range
Contact Rating - Resistive Load
Depth
Height
Series
346-479
346-463
329-266
329-272
329-288
unit
Stock no.
Functions - 111, 141, 211, 421, 451, 452, 611, 612
7 time ranges
Industrial design
Wide voltage range
22.5mm wide
12 → 240 Vac/dc
50 ms → 100 h
5 A @ 250 V ac
S$
Functions - 142, 161, 454, 211, 411, 661, 24 hour mode
IP65 (Front Face)
External 3Vdc battery back-up to retain clock on 24 hour
mode only, at loss of voltage
Four reset/start modes: unconditional reset, start only
after time, either from front panel or external volt free
contacts
6 timing ranges
71 x 29mm panel cut out
Standards: EN 50081-1, EN 50082-1, EN 61010-1
Gamma Series - G2ZM20
Supply Voltage
Time Range
Contact Rating - Resistive Load
OM
Four Digit
Functions - 111, 141, 211, 421, 451, 452, 611, 612
All 8 listed functions operate with 2 x delayed contacts or 1x delayed
and 1 x instantaneous contact offering 16 functions in total
16 time ranges
Industrial design
Connection of remote potentiometer possible
Zoom voltage 24-240Vac/dc
22.5mm wide
24 → 240 Vac/dc
50 ms → 30 d
5 A @ 250 V ac
Price per
329-777
Gamma Series - G2ZMF11
Supply Voltage
Time Range
Contact Rating - Resistive Load
Price
per
48 mm
48 mm
142 mm
SPDT
Stock no.
Stock no.
Stock no.
Functions – 111, 132, 142, 143, 421, 451, 452, 453, 454, 611, 612, 651,
652
Asymmetrical function pulse time settings: 0.5s, 1s, 5s, 15s
Contact closure or NPN/PNP inputs can be used to control timing
functions
An integral power supply is available for powering sensors, etc.
6 timing ranges
11 pin
46 x 46mm panel cut out
Functions - 191, 413, 421,(2x independent time ranges) 651, 652
7 time ranges
Industrial design
Wide voltage range
22.5mm wide
12 → 240 Vac/dc
50 ms → 100 h
5 A @ 250 V ac
Depth
(mm)
Delayed; 5 A, instantaneous; 2 A
6 s → 60 h
Three Digit
S$
Gamma Series - G2ZI20
Supply Voltage
Time Range
Contact Rating - Resistive Load
DIN 48 x 48 mm Contact Rating - Resistive Load
2 x SPDT
Time Range
56
Width
Mounting
Function
Output Contacts
RS Timer Function
Stock no.
308-1585
Price per
OM
S$
1+
370·00
unit
S$
6+
S$
350·00
Three Digit LCD – UDT Type
Functions - 142, 211, 411, 453, 662
LCD display can be set to count down or count up
For a suitable base with easy to configure rear terminals
see stock no. 403-869
Panel mount
Standards: EN 50081-1, EN50082-1, EN61010-1
17.5 mm
DIN Rail
8
SPDT
121;211;191;451;521
OM
S$
1+
76·00
S$
S$
Height
Depth
Width
Contact Configuration
48 mm
70 mm
48 mm
SPDT
Supply Voltage
Contact Rating - Resistive Load
Battery Type
Time Range
Many more leading brands from over 2,500 suppliers available online
18 → 264 Vac/dc
7 A @ 240 V ac
CR2430 (Lithium)
0.1 s → 99.9 h
1355
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Counters, Timers & Hour Meters
CT-S - time relays, on delay
Stock no.
343-997
Price per
OM
unit
S$
S$
1+ 225·00
6+ 210·00
S$
Panel Mount Adaptor
56
Series
Time Range
Size
Connection Type
Reduces a standard 72 DIN cut-out to a 48 DIN cut-out
When fitted, the adaptor will accept standard 48 DIN components (cut-out
45x45)
Stock no.
Price per
328-099
OM
S$
1+
9·80
unit
S$
15+
S$
9·05
50+
Electronic on-delay time relay (111)
LEDs for status display
Rotary switch for preselecting the time range
Potentiometer for fine tuning the time range
Dual chamber box connection terminals
Remote potentiometer connection
Integrated labelling plate
Approvals: CE, UL
CT-S
0.05 s → 300 h
22.5 mm
Connecting Terminal
Type
8·85
Stock no.
CT-ERS.21
On Delay
SPDT
Supply Voltage
0.05 s → 100 h
Contact Rating Resistive Load
Stock no.
1SVR 500 100 R 0000
489-7167
Price per
Height
Depth
Contact Configuration
24 → 48 Vdc; 24 → 240 V
ac
8 A @ 250 V ac
Manu. Part
No.
M1DOM
OM
S$
1+
97·50
unit
S$
6+
91·50
S$
12+
89·50
Electronic timer relay
Function: on-delay
Wide range input
Contact rating 5 A at 250 V
Simple adjustment via potentiometer with absolute display
LEDs for status display
Approvals: CE, UL
Price per
OM
unit
S$
S$
S$
1+ 162·00
Time Range
Functions – 111
1 time range per model
Direct reading scales for fast positive adjustment
LEDs for status indication
Operating temperature range: -20°C → +60°C
Contact material: AgCdO
22.5mm wide
Approvals: UL listed/UL listed for Canada; GL; GOST; C-Tick
Standards: IEC/EN 61812-1
0.5 s → 10 s
2 s → 60 s
0.5 min → 10 min
2 min → 60 min
0.5 s → 10 s
2 s → 60 s
0.5 min → 10 min
2 min → 60 min
Contact Rating - Resistive Load
Supply Voltage
8 A @ 250 V ac
24 Vac/dc; 220 → 240 V ac
Manu. Part No.
Time Range
Stock no.
Price
per
OM
S$
1SVR 550 107 R1100
1SVR 550 107 R4100
1SVR 550 107 R2100
0.1 s → 10 s
0.3 s → 30 s
3 s → 300 s
442-9118
442-9045
442-9130
unit
unit
unit
1+
1+
1+
67·50
66·00
66·00
S$
6+
6+
6+
63·50
62·00
62·00
S$
12+
12+
12+
62·00
60·50
60·50
Function - 111
10 time ranges
Double-chamber cage connecting terminals
Operating temperature: -25°C to +60°C
22.5mm wide
Approvals: cULus, GL, GOST, CCC, CE, C-tick
Standards: IEC/EN61812-1
Contact
Configuration
CT-ERS.12
CT-ERS.22
SPDT
DPDT
1356
Price
per
333-795
333-824
unit
unit
OM = Order Multiple
Price
per
127-8030
unit
OM
S$
S$
1+ 101·50
6+
S$
94·50
12+
92·50
Stock no.
296-7359
300-5856
300-5840
300-5834
300-5828
300-5812
300-5799
300-5783
Price per
SPDT
8 A @ 250 V ac
Stock no.
296-7359
300-5856
300-5840
300-5834
300-5828
300-5812
300-5799
300-5783
OM
S$
1+
1+
1+
1+
1+
1+
1+
1+
58·50
58·50
63·50
58·50
50·00
50·00
50·00
50·00
unit
unit
unit
unit
unit
unit
unit
unit
S$
6+
6+
6+
6+
6+
6+
6+
6+
54·50
54·50
59·00
54·50
46·50
46·50
46·50
46·50
S$
12+
12+
12+
12+
12+
12+
12+
12+
53·50
53·50
58·00
53·50
45·50
45·50
45·50
45·50
Functions – 111, 131
Self-extinguishing case
17.5mm wide
Approvals: UL recognised component for Canada and US
Standards: Conforms to IEC1812-1, EN50081-1/2, EN50082-1/2
Height
Depth
Contact Configuration
1 s → 100 h
24 Vdc; 24 → 240 V ac
8 A @ 250 V ac
81 mm Time Range
60 mm Supply Voltage
SPDT Contact Rating - Resistive Load
Manu. Part
No.
Stock no.
Price
per
OM
S$
88 826 115
331-1016
unit
1+
62·00
S$
6+
S$
57·50
12+
56·50
Solid State Output - MBA2F Series
4 A @ 250 V ac
24 → 48 Vdc; 24 → 240 V ac
0.05 s → 300 h
Stock no.
Stock no.
Two Function - Chronos 2 MAR1
CT-ERS - On Delay
Manu. Part
No.
S$
M1EDO
CT-ERE (On Delay)
Contact Rating - Resistive Load
Supply Voltage
Time Range
S$
0.24 s → 10 h
24 → 240 Vac/dc
8 A @ 250 V ac
89 mm Time Range
59 mm Supply Voltage
SPDT Contact Rating - Resistive Load
Height
89 mm
Contact Configuration
Depth
59 mm
Contact Rating - Resistive Load
Supply Voltage
Time Range
24 Vac/dc; 230 V ac
0.5 s → 10 s
24 Vac/dc; 230 V ac
2 s → 60 s
24 Vac/dc; 230 V ac
0.5 min → 10 min
24 Vac/dc; 230 V ac
2 min → 60 min
24 Vac/dc; 110 Vac.
0.5 s → 10 s
24 Vac/dc; 110 V ac
2 s → 60 s
24 Vac/dc; 110 V ac
0.5 min → 10 min
24 Vac/dc; 110 V ac
2 min → 60 min
RS Timer Function111
Size
17.5 mm
Supply Voltage 24 → 48 VDC, 24 → 240 VAC Connection TypeConnecting Terminal
Type
On-delay
Time Range
0.05 s → 100 h (7 time ranges)
Output Contacts 2-changeover
185-081
S$
1+ 195·00
Function - 111
LED indication for supply and relay status
Flame retardant housing to UL 94V-0
CE marked in compliance with relevant Euorpean Directives
17.5mm wide
Approvals: UL recognised component for Canada and US
CT-D - time relays, on delay
Stock no.
OM
Function - 111
LED indication for supply and relay status
Flame retardant housing to UL 94V-0
17.5mm wide
Approvals: UL recognised component for Canada and US
Functions – 111
Parallel load to the voltage related control inputs is possible
Wide voltage range
LEDs for status indication
Operating temperature range: -20°C → +60°C
Contact material: AgSnO222.5mm wide
Approvals: UL listed/UL listed for Canada; GL; GOST; C-Tick
Standards: IEC/EN 61812-1, DIN VDE 0435 pt 2021
Manu. Part No.
Price per
unit
M1DOM
CT-ERD
Contact
Configuration
Time Range
185-255
-25 to +60 °C
24-240V AC/DC
3-changeover
Operating Temperature Range
Supply Voltage
Output Contacts
OM
S$
S$
S$
1+ 108·00
1+ 130·00
6+ 101·50
6+ 122·00
12+ 99·50
12+ 119·50
Function - 111
Short circuit and reverse polarity protected
LED indication of power and output
400mA output rating on a.c. types
200mA output rating on d.c. types
Depth: 47.5mm
Manu. Part No. Supply Voltage (Vdc)
Time Range
88 901 302
24
0.1 s → 1 s
88901802
24
0.5 s → 10 s
88 901 342
24
3 s → 60 s
88901804
24
0.5 min → 10 min
88 901 392
24
3 min → 60 min
Time Range
Stock no.
0.1 s → 1 s
0.5 s → 10 s
3 s → 60 s
433-3900
433-3916
433-3950
Price per
unit
unit
unit
Stock no.
433-3900
433-3916
433-3950
433-3966
433-3988
OM
S$
1+
1+
1+
90·50
92·50
92·50
S$
6+
6+
6+
84·00
86·00
86·00
S$
12+
12+
12+
82·50
84·00
84·00
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
Accessories
Time Range
Stock no.
0.5 min → 10 min
3 min → 60 min
433-3966
433-3988
Price per
unit
unit
OM
S$
1+
1+
90·50
90·50
S$
6+
6+
84·00
84·00
12+
12+
S$
Description
Stock no.
82·50
82·50
Setting Tool
365-7025
unit
OM
S$
1+
17·50
S$
6+
17·20
S$
12+
16·80
Miniature - H3Y4
RTM Series
Function - 111
Pin compatible with MY power relay
Time settings adjustable with a screwdriver
All have 14 pins (rectangular format)
Approvals: UL, CSA
Standards: EN 50081-2, EN50082-2, VDE0435/P2021, VDE0110
Function - 111
An instantaneous setting is available for testing
Screwdriver adjustable timer settings
Excellent noise resistance
8 and 14 pin rectangular format
Approvals: UL, C-UL
Description
Stock no.
8-pin DPCO 24Vdc
14-pin 4PCO 12Vdc
14-pin 4PCO 24Vdc
14-pin 4PCO 230Vac
454-7014
433-4026
436-4746
433-4032
Height
Width
Depth
0.1 s → 100 h
5 A @ 250 V ac
Height 27 mm Time Range
Width 21 mm Contact Rating - Resistive Load
Depth 63 mm
Contact
Supply
Number of
Configuration
Voltage
Pins
DPDT
24 V dc
8
4PDT
12 V dc
14
4PDT
24 V dc
14
4PDT
230 V ac
14
Manu. Part
No.
88 895 202
88 896 801
88 896 802
88 896 805
Price per
unit
unit
unit
unit
Stock no.
454-7014
433-4026
436-4746
433-4032
OM
S$
1+
1+
1+
1+
78·00
79·00
79·00
79·00
S$
6+
6+
6+
6+
73·00
73·50
73·50
73·50
S$
12+
12+
12+
12+
71·00
72·00
72·00
72·00
Chronos 2 TAR1, On Delay
3 wire sensor control option
22.5mm wide
Approvals: UL Listed; UL Listed for Canada
Standards: IEC1812-1, EN50081-1/2, EN50082-1/2
Height
78 mm
Time Range
0.1 s → 100 h
Depth
95 mm
Contact Rating - Resistive Load 8 A @ 250 V ac
Supply Voltage 24 Vdc; 24 → 240 V ac Timer Function
On Delay: 111, 131
Manu. Part No.
Contact Configuration
Stock no.
88 865 115
SPDT
331-1050
88 865 215
DPDT
331-1066
Manu. Part No.
Stock no.
88 865 115
88 865 215
Price per
331-1050
331-1066
unit
unit
OM
S$
1+
1+
72·00
98·00
S$
6+
6+
67·50
92·00
S$
12+
12+
66·50
90·00
Function - 111
6 time ranges
Wide voltage range
Contact material: AgCdO
111
0.1 s → 20 h
24 → 240
24 → 240
SPDT
Contact Rating - Resistive Load
Reset Accuracy
Depth
Height
Width
Manu. Part No.
Stock no.
Price
per
OM
S$
80.11.0.240.0000
221-086
unit
1+
77·00
16 A @ 250 V ac
± 5% ms
61 mm
89 mm
17.5 mm
S$
6+
71·00
Contact Configuration
Number of Pins
Contact Rating - Resistive Load
Manu. Part No.
H3Y-4 DC24 10S
H3Y-4 DC24 60S .
H3Y-4 DC24 3M .
H3Y-4 DC24 5M ..
H3Y-4 DC24 30M .
H3Y-4 AC24 10S
H3Y-4 AC24 3M
H3Y-4 AC24 10M
H3Y-4 AC24 30M
H3Y-4 AC100-120 60S
H3Y-4 AC100-120 5M
H3Y-4 AC200-230 10S
H3Y-4 AC200-230 30S
H3Y-4 AC200-230 60S
H3Y-4 AC200-230 3M
H3Y-4 AC200-230 5M
H3Y-4 AC200-230 10M
H3Y-4 AC200-230 30M
24 Vdc 0.5 - 10 sec
24 Vdc 2 - 60 sec
24 Vdc 0.1 - 3 min
24 Vdc 0.2 - 5 min
24 Vdc 1 - 30 min
24 Vac 0.5 - 10 sec
24 Vac 0.1 - 3 min
24 Vac 0.5 - 10 min
24 Vac 1 - 30 min
110 Vac 2 - 60 sec
110 Vac 0.2 - 5 min
240 Vac 0.5 - 10 sec
240 Vac 1 - 30 sec
240 Vac 2 - 60 sec
240 Vac 0.1 - 3 min
240 Vac 0.2 - 5 min
240 Vac 0.5 - 10 min
240 Vac 1 - 30 min
4PDT
14
3 A @ 250 V ac
Supply Voltage
24 V dc
24 V dc
24 V dc
24 V dc
24 V dc
24 V ac
24 V ac
24 V ac
24 V ac
110 V ac
110 V ac
240 V ac
240 V ac
240 V ac
240 V ac
240 V ac
240 V ac
240 V ac
Stock no.
340-392
340-415
340-421
340-437
340-459
340-465
340-493
340-516
340-522
340-550
340-572
340-601
340-617
340-623
340-639
340-645
340-651
340-667
56
Price per
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
Time Range
0.5 s → 10 s
2 s → 60 s
0.1 min → 3 min
0.2 min → 5 min
1 min → 30 min
0.5 s → 10 s
0.1 min → 3 min
0.5 min → 10 min
1 min → 30 min
2 s → 60 s
0.2 min → 5 min
0.5 s → 10 s
1 s → 30 s
2 s → 60 s
0.1 min → 3 min
0.2 min → 5 min
0.5 min → 10 min
1 min → 30 min
OM
S$
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
60·00
87·00
81·00
81·00
81·00
81·00
81·00
81·00
81·00
52·00
52·00
60·00
52·00
60·00
52·00
52·00
52·00
52·00
Stock no.
340-392
340-415
340-421
340-437
340-459
340-465
340-493
340-516
340-522
340-550
340-572
340-601
340-617
340-623
340-639
340-645
340-651
340-667
S$
6+
6+
6+
6+
6+
6+
6+
6+
6+
6+
6+
6+
6+
6+
6+
6+
6+
6+
58·80
85·30
79·40
79·40
79·40
79·40
79·40
79·40
79·40
51·00
51·00
58·80
51·00
58·80
51·00
51·00
51·00
51·00
S$
12+
12+
12+
12+
12+
12+
12+
12+
12+
12+
12+
12+
12+
12+
12+
12+
12+
12+
57·60
83·60
77·80
77·80
77·80
77·80
77·80
77·80
77·80
50·00
50·00
57·60
50·00
57·60
50·00
50·00
50·00
50·00
Solid State Timer H3Y Series
A range of miniature on-delay timers compatible with the MY series of
relays.
Timer function 111
Large transparent time setting knob facilitates time setting
Flat-blade and Phillips screwdriver settable
Pin-configuration compatible with MY Power Relays
LED indication for power and output status
Conforms to VDE 0435/P2021
Approvals: UL, CSA
S$
12+
28 mm
21.5 mm
63 mm
Description
80 Series - On Delay Timer
Timer Function
Time Range
Supply Voltage (Vac)
Supply Voltage (Vdc)
Contact Configuration
Price per
69·50
87 Series - On Delay
AgCdO contact material
22.5mm wide
Height
78.8 mm Supply Voltage
24 → 48 Vdc; 24 → 240 V ac
Depth
96 mm Time Range
0.05 s → 60 h
Contact Configuration SPDT Contact Rating - Resistive Load 8 A @ 250 V ac
Time contacts
DPDT
All other voltages:- 85% to 110% of rated voltage
Time limit operation
Self Resetting
Control ouputs 5A at 250VAC resistive
Operating Volatge Range 12VDC:- 90% to 110%
Selection guide
Manu. Part No.
Stock no.
87.11.0.240.0000
511-7282
Price per
unit
OM
S$
1+
78·00
S$
6+
72·00
S$
12+
70·00
Tamperproof - H3DS
Functions - 111
User can select functions to be accessible or locked to the
operator, using tool, available separately
17.5mm wide
Approvals: UL, CSA
Height
Depth
80 mm
68 mm
Manu. Part No.
H3DS-AL AC/DC
H3DS-XL
Time Range
0.1 s → 120 h
Contact
Supply Voltage
Contact Rating - Resistive Load
Configuration
(V ac)
SPDT
24 → 230 Vac, 24 → 48
5 A @ 250
V dc
SCR
24 → 230 V ac
0.7 A @ 250
Manu. Part No.
Stock no.
H3DS-AL AC/DC
H3DS-XL
365-7003
397-1220
Price per
unit
unit
OM
S$
1+
1+
49·40
69·00
Stock no.
365-7003
397-1220
S$
6+
6+
48·50
67·70
S$
12+
12+
47·50
66·30
stock no.
386-1195
386-1202
386-1224
386-1268
386-1218
386-1230
386-1274
386-1101
386-1094
386-1117
386-1066
386-1145
386-1139
386-1151
386-1173
386-1123
Omron part no.
H3Y-2 DC12 10S
H3Y-2 DC12 30S
H3Y-2 DC24 1S
H3Y-2 DC24 5S
H3Y-2 DC24 10S
H3Y-2 DC24 30S
H3Y-2 DC24 60S
H3Y-2 AC100-120 5S
H3Y-2 AC100-120 30S
H3Y-2 AC100-120 60S
H3Y-2 AC100-120 10M
H3Y-2 AC200-230 1S
H3Y-2 AC200-230 10S
H3Y-2 AC200-230 30S
H3Y-2 AC200-230 60S
H3Y-2 AC200-230 10M
Supply Voltage Time Range
230 V ac
230 V ac
230 V ac
230 V ac
0.5 → 10 min
0.5 → 10 s
1.0 → 30 s
2.0 → 60 s
Stock no.
386-1123
386-1139
386-1151
386-1173
Supply voltage
12 Vdc
12 Vdc
24Vdc
24Vdc
24Vdc
24Vdc
24Vdc
100-120 Vac
100-120 Vac
100-120 Vac
100-120 Vac
200-230 Vac
200-230 Vac
200-230 Vac
200-230 Vac
200-230 Vac
Price per
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
41·80
41·80
41·80
41·80
Visit our website for additional price information and exciting promotions
Timing range
0.5 - 10 sec
1.0 - 30 sec
0.1 - 1.0 sec
0.2 - 5.0 sec
0.5 - 10 sec
1.0 - 30 sec
2.0 - 60 sec
0.2 - 5.0 sec
1.0 - 30 sec
2.0 - 60 sec
0.5 - 10 min
0.1 - 1.0 sec
0.5 - 10 sec
1.0 - 30 sec
2.0 - 60 sec
0.5 - 10 min
S$
5+
5+
5+
5+
41·40
41·40
41·40
39·00
S$
10+
10+
10+
10+
41·30
41·30
41·30
38·10
1357
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Counters, Timers & Hour Meters
Time Range Supply Voltage
56
Supply Voltage Time Range
Stock no.
2.0 → 60 s
1.0 → 30 s
0.2 → 5.0 s
0.5 → 10 s
1.0 → 30 s
0.5 → 10 s
0.1 → 1.0 s
1.0 → 30 s
0.2 → 5.0 s
2.0 → 60 s
386-1117
386-1094
386-1101
386-1195
386-1202
386-1218
386-1224
386-1230
386-1268
386-1274
120 V ac
120 V ac
120 V ac
12 V dc
12 V dc
24 V dc
24 V dc
24 V dc
24 V dc
24 V dc
Price per
OM
S$
1+
1+
1+
1+
1+
1+
1+
1+
1+
1+
41·80
41·80
42·00
43·70
41·80
41·80
41·80
41·80
41·80
41·80
unit
unit
unit
unit
unit
unit
unit
unit
unit
unit
S$
5+
5+
5+
5+
5+
5+
5+
5+
5+
5+
39·00
41·40
41·40
41·50
41·40
41·40
41·40
41·40
41·40
41·40
S$
10+
10+
10+
10+
10+
10+
10+
10+
10+
10+
38·10
41·30
41·30
41·40
41·30
41·30
41·30
41·30
41·30
41·30
Relay Cube - CT3E
Function 111
Plugs in between an 11 pin plug relay and its socket, enabling the
relay to be operated as a time relay
Fine time setting achieved by a thumb wheel potentiometer with the
relay fitted
Approvals: UL, CSA.
Height
Width
50 mm
35 mm
Depth
Time Range
Manu. Part Supply Voltage
No.
(Vac/dc)
CT3-E30 / L 20 → 65
CT3-E30 / H 90 → 265
Price
per
459-4357
459-4363
unit
unit
OM
S$
S$
1+ 107·50
1+ 107·50
6+ 100·00
6+ 100·00
S$
12+
12+
98·00
98·00
On Delay-RE8T
Stock no.
0.1 s → 10 s
3 s → 300 s
0.3 s → 30 s
20 s → 30 min
Price per
a609-8384
a609-8390
610-1115
610-1121
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
71·00
71·00
54·50
54·50
Manu. Part
No.
S$
S$
RE11 RC MU
RE11 RA MU
RE11 RH MU
a738-8650
a738-8653
a738-8657
OM
S$
unit
unit
unit
1+
1+
1+
72·00
61·50
72·00
Price
per
OM
S$
340-5408
unit
1+
68·50
S$
S$
S$
6+
Panel Cut Out
Contact Rating - Resistive Load
Time Range
Supply Voltage
0.5 s → 20 s
5 s → 200 s
0.5 s → 20 s
1 min → 30 min
0.5 s → 20 s
240 V ac
240 V ac
110 V ac
110 V ac
24 V dc
1358
Stock no.
349-872
349-888
349-894
347-905
349-923
S$
unit
S$
1+
6·85
25+
6·40
100+
6·25
110Vac, 240Vac (50Hz)
Repeat accuracy
±0.5%
6s, 60s, 6min, 60min, 6h
Screw terminal capacity 1 x 25mm2 max
SPDT 6A @ 250Vac (instantaneous) Power consumption
15VA continuously rated
DPDT 10A @ 250Vac (delayed)
Height
72 mm
Width
72 mm
Operating temperature -10 to +70°C
Reset accuracy
300ms
Depth
133 mm
Description
Coil Voltage (V ac)
Time Range
Stock no.
11-pin 6sec-6hr 110V
110
6s→6h
348-453
Timer relay 230 V 50 Hz 0–6 hours
230
6s→6h
329-389
11-pin 6sec-6hr 240V
240
6s→6h
349-866
Stock no.
Price per
348-453
329-389
349-866
unit
unit
unit
OM
S$
S$
S$
1+
1+
1+
260·00
235·00
260·00
6+ 240·00
5+ 220·00
6+ 240·00
10+ 215·00
Functions - 211 (Off-delay)
SPDT contact configuration
Parallel load to the voltage related control inputs is possible
Wide voltage range
LEDs for status indication
Operating temperature range: -20°C → +60°C
Contact material: AgSnO2
22.5mm wide
Approvals: UL listed/UL listed for Canada; GL; GOST; C-Tick
Standards: IEC/EN 61812-1, DIN VDE 0435 pt 2021
64·00
Off-delay
Stock no.
Price per
489-7173
unit
OM
S$
S$
S$
1+ 113·00
6+ 106·00
12+ 104·00
S$
S$
12+
Price per
OM
S$
S$
S$
S$
1+
1+
1+
1+
1+
123·50
123·50
123·50
118·00
123·50
1+ 149·00
6+ 140·00
12+ 137·00
CT-D
0.05 s → 100 h (7 time ranges)
24 → 48 Vdc, 24 → 240 V ac
2 changeovers
17.5 mm
Connecting Terminal
-20 → +60 °C
Stock no.
185-097
unit
OM
S$
1+ 162·00
Function - 211
10 time ranges
Control input with volt-free triggering
Double-chamber cage connecting terminals
Operating temperature: -25°C to +60°C
22.5mm wide
Approvals: cULus, GL, GOST, CCC, CE, C-tick
Standards: IEC/EN61812-1
62·50
Contact Rating - Resistive Load
Contact Configuration
Supply Voltage
Time Range
S$
6+
6+
6+
6+
6+
Price per
CT-AHS - Off Delay
S$
45 x 45 mm
10 A @ 250 V ac
unit
unit
unit
unit
unit
S$
OM
Functions - 141 (double pole with instantaneous contact and
special function)
Motor and clutch connections are separate in order to facilitate
interrupt timing (disconnect motor) or reset timer (de-energise
clutch coil).
Rated for 50Hz supply frequency only
68 x 68mm panel cut out
Note: Regarding reset accuracy, the clutch coil must be disconnected
from the supply for a minimum of 500ms.
Type
Function 111
LED indication of power on and relay energised
DPDT contact configuration
AgCdO contact material
Standards: EN 50081-1, EN 50082-1, EN 61010-1.
50 mm
50 mm
95 mm
12+ 112·50
12+ 112·50
Multifunction Electromechanical Timer – 11 Pin
Series
Time Range
Supply Voltage
Output Contacts
Size
Connection Type
Operating Temperature Range
Octal Base
Height
Width
Depth
6+ 115·00
6+ 115·00
Electronic timer relay
Function: Off delay (211)
Wide range input
Contact rating 5 A at 250 V
Simple adjustment via potentiometer with absolute display
LEDs for status display
Approvals: CE, UL
Height
64 mm Time Range
1 s → 10 d
Depth
70 mm Contact Rating - Resistive Load 8 A @ 250 V ac
Contact Configuration SPDT Supply Voltage
24 Vac/dc; 110 Vac; 230 V ac
Stock no.
1+ 123·50
1+ 123·50
CT-D Timer Relay, Off-Delay
Timing period indication
22.5mm wide
D6DR
403-853
1SVR 500 110 R 0000
On Delay - Delta D6DE
Manu.
Part No.
S$
Supply Voltage
24 → 48 Vdc; 24 → 240 V ac Time Range 0.05 s → 100 h
Contact Rating - Resistive Load 8 A @ 250 V ac
0.1 s → 100 h
8A
Price
per
Price per
Fingerproof Reversed Socket
Manu. Part No.
Time Range
Contact Rating - Resistive Load
Stock no.
Stock no.
S$
CT-AHD
Timing functions including - 111, 211 and 421
Solid state output on some models
Good for short cycle, repetitive actions
17.5 mm wide
Approvals: CSA, CULus, CE
Standards: IEC 61812-1
81 mm
72 mm
unit
unit
S$
Off Delay
On Delay Timers - RE11 Series
Height
Depth
Description
110
230
240
Height
78 mm Supply Voltage
24 Vac/dc; 110 → 240 V ac
Depth
80 mm Contact Rating - Resistive Load 8 A @ 250 V ac
Contact Configuration SPDT
Manu. Part No. Time Range
349-939
349-951
OM
Accessories
Coil Voltage (V ac)
Function-111
Sealable transparent cover protects settings
22.5mm wide
Note: Manufacturers part numbers suffixed with ’TQ’ are supplied in packs of
10
Standards: UL;GL;CSA
RE8TA11BU
RE8TA21BU
RE8TA31BUTQ
RE8TA41BUTQ
5 s → 200 s 24 V dc
5 s → 200 s 12 V dc
Price per
Supply voltage
Time ranges
Contacts
37 mm
0.2 s → 30 min
Stock no.
Stock no.
115·00
115·00
115·00
109·50
115·00
OM = Order Multiple a New product to range
S$
12+
12+
12+
12+
12+
112·50
112·50
112·50
107·50
112·50
Manu. Part No.
CT-AHS.22
4 A @ 250 V ac
DPDT
24 → 48 Vdc; 24 → 240 V ac
0.05 s → 300 h
Stock no.
333-802
Price per
unit
OM
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
M1ESW
Mounting Type
Series
Function - 211
LED indication for supply and relay status
SPDT contacts
Flame retardent housing to UL 94V-0
Can also be surface mounted
CE marked
17.5mm wide
Approvals: UL recognised component for Canada and US
Supply Voltage (Vac)
Time Range
Height
Stock no.
300-5935
Supply Voltage (Vac/dc)
Price per
OM
S$
1+
73·00
S$
68·00
S$
12+
66·50
Height
Depth
Supply Voltage
Time Range
Contact Rating - Resistive Load
Function - 211
Self-extinguishing case
AgNi Contact material
SPDT contacts
17.5mm wide
Approvals: UL Listed; UL Listed for Canada
Standards: IEC 1812-1, EN50081-1/2, EN50082-1/2
Manu. Part
No.
Stock no.
Price
per
OM
S$
88 826 135
331-1038
unit
1+
65·00
8 A @ 250 V ac
1 s → 100 h
S$
6+
60·50
12+
59·00
211
Depth
0.1 s → 100 h
IP Rating
24 Vdc; 24 → 240 V ac Manufacturer Timer Function
SPDT
Mounting Type
AgNi
Series
8 A @ 250 V ac
Width
Stock no.
88 865 135
331-1072
Price per
unit
OM
S$
1+
82·00
95 mm
IP40
C
DIN rail
Chronos 2
22.5 mm
Stock no.
Price
per
OM
S$
80.41.0.240.0000
221-092
unit
1+
77·00
6+
77·00
12+
CT2-A30 / L 20 → 65
Stock no.
Price
per
459-4385
unit
8 Pin DIN Rail Socket
Stock no.
329-468
16 A @ 250 V ac
± 5% ms
61 mm
89 mm
17.5 mm
unit
Stock no.
OM
S$
6+
71·00
D6DR
S$
12+
OM
S$
S$
S$
1+ 118·90
6+ 115·30
12+ 113·00
Price per
unit
Depth
Height
Manufacturer Timer Function
Mounting Type
Series
Width
S$
72 mm
81 mm
C
DIN rail
Zelio
17.5 mm
S$
S$
1+ 113·00
211
1 s → 10 d
24 Vac/dc; 110 Vac; 230 V ac
SPDT
8 A @ 250 V ac
Stock no.
Price
per
OM
S$
340-5414
unit
1+
81·00
Depth
IP Rating
Manufacturer Timer Function
Mounting Type
Width
S$
6+
70 mm
IP40
R
DIN rail
22.5 mm
S$
75·50
12+
74·00
On + Off Delay
69·50
Symmetrical, Asymmetrical, 22.5mm
– Zelio RE7M
External control for suspension of time relay and
adjustment of time delay
External starting of time delay via external contact only
Sealable transparent cover protects settings
Approvals: UL, CSA
Standards: IEC 61812-1
OM
S$
S$
S$
1+ 141·50
6+ 131·50
12+ 129·00
Price per
S$
S$
unit
OM
S$
1+
10·30
6+
10·10
12+
9·90
Function - 211
Plugs in between a relay and its socket, enabling
the relay to be operated as a time relay
Fine time setting achieved by a thumb wheel potentiometer with the
relay fitted
Approvals: UL, CSA
Off Delay
211
0.2 s → 30 min
11 Pin
407-1977
Off Delay
211
1 s → 100 h
24 → 240 V ac
SS
Screw Terminal
0.7 A @ 250 V ac
Manu. Part
No.
11 Pin Relay Cube - CT3A
Product Index
RS Timer Function
Time Range
Connection Type
Price
per
Product Index
RS Timer Function
Time Range
Supply Voltage
Output Contacts
Connection Type
Contact Rating - Resistive Load
RS Timer Function
Time Range
Supply Voltage
Output Contacts
Contact Rating - Resistive Load
Accessories
Description
Stock no.
0.2 s → 30 min
20 → 65
20 → 65
Time Range
Supply Voltage Range (Vac)
Supply Voltage Range (Vdc)
Manu. Part Supply Voltage
No.
(Vac/dc)
56
75·50
Function - 211
Plugs in between a relay and its socket, enabling the relay to be
operated as a time relay
Fine time setting achieved by a thumb wheel potentiometer with the
relay fitted
Approvals: UL, CSA
50 mm
35 mm
37 mm
12+ 145·00
12+ 145·00
S$
8 Pin Relay Cube - CT2A
Height
Width
Depth
6+ 148·00
6+ 148·00
Timing period indication
22.5mm wide
Contact Rating - Resistive Load
Reset Accuracy
Depth
Height
Width
Manu. Part No.
1+ 159·00
1+ 159·00
Off Delay - Delta D6DR
S$
Function - 211
6 time ranges
Wide voltage range
Contact material AgCdO
211
0.1 s → 20 h
24 → 240
24 → 240
SPDT
Contact
Configuration
a609-8283
80 Series - Off Delay timer
Timer Function
Time Range
Supply Voltage (Vac)
Supply Voltage (Vdc)
Contact Configuration
S$
Function - 211
Solid state output
Good for short cycle, repetitive actions
Allows connection of external potentiometer
17.5 mm wide
S$
3 wire sensor control option
22.5mm wide
Approvals: UL Listed; UL Listed for Canada
Standards: IEC1812-1, EN50081-1/2, EN50082-1/2
Manu. Part No.
S$
Solid State Off Delay - RE11 Series
Off Delay - Chronos 2 TCR1
RS Timer Function
Time Range
Supply Voltage
Output Contacts
Contact Material
Contact Rating - Resistive Load
unit
unit
S$
78 mm
80 mm
24 Vac/dc; 42 → 48 Vac/dc; 110 → 240 V ac
0.05 s → 300 h
8 A @ 240 V ac
RE7RM11BU SPDT
Contact Rating - Resistive Load
Time Range
Manu. Part
No.
a459-4436
a459-4442
OM
35 mm
Function - 211
External control for suspension of time relay
External starting of time delay
Sealable transparent cover protects settings
External control is possible for stock number 407-1977 with a potentiometer
22.5mm wide
Approvals: UL, CSA
Standards: IEC 61812-1
59 mm
8 A @ 250 V ac
Chronos 2 MCR1
Height
81 mm
Depth
60 mm
Supply Voltage 24 Vdc; 24 → 240 V ac
Price per
Width
Off Delay Tamperproof - Zelio RE7R
Depth
Contact Rating - Resistive Load
6+
Stock no.
90 → 150
180 → 265
24 Vac/dc; 110 V ac
0.5 min → 10 min
89 mm
unit
11 pin plug in
CT3A
Depth
Height
IP Rating
Manufacturer Timer Function
Product Index
Time Range
Supply Voltage
Connection Type
Contact Material
Contact Rating - Resistive Load
Depth
Height
IP Rating
Mounting Type
Series
Width
Output Contacts
Manufacturer Timer Function
Manu. Part No.
RE7MV11BU
Stock no.
a609-8312
Symmetrical/Asymmetrical
0.05 s → 300 h
24 Vac/dc; 42 → 48 Vac/dc; 110 → 240 V ac
Screw Terminal
AgNi
3 A @ 250 V ac
80 mm
78 mm
IP50
DIN rail
Zelio
22.5 mm
SPDT
L,Li,Lt
Price per
unit
OM
S$
S$
S$
1+ 222·00
37 mm
50 mm
IP40
A
New products available online every week
1359
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Counters, Timers & Hour Meters
8 Pin - H3CR-H8LM
True Off Delay
Function 311
Short behind panel depth
LED indication of power and contact status
Suitable DIN rail socket stock no. 329-468
45 x 45mm panel cut-out
Contact material AgCdO
Note: Not supplied with panel mount adaptor. Suitable adaptor
available stock no. 342-916.
Approvals: UL, CSA. Conforms to EN 50081-1, EN 50082-2,
EN61812-1, IEC 60664-1, EN 60947-5-1
CT-ARS - True Off Delay
56
Function - 311
7 time ranges
Double-chamber cage connecting terminals
Operating temperature: -25°C to +60°C
22.5mm wide
Approvals: cULus, GL, GOST, CCC, CE, C-tick
Standards: IEC/EN61812-1
Contact Rating - Resistive Load 4 A @ 250 V ac
Time Range 0.05 s → 10 min
Supply Voltage
24 → 48 Vdc; 24 → 240 V ac
Manu. Part
No.
Contact
Configuration
CT-ARS.12
CT-ARS.22
SPDT
DPDT
Stock no.
Price
per
333-830
333-818
unit
unit
OM
Height 48 mm Contact Configuration
Width 48 mm Contact Rating - Resistive Load
Depth 87 mm Time Range
S$
S$
1+ 179·50
1+ 210·00
6+ 168·50
6+ 197·50
S$
Manu. Part No.
H3CR-H8L AC/DC24 M
H3CR-H8L AC100-120 M
H3CR-H8L AC200-240 M
Supply Voltage
24 Vac/dc
100 → 120 V ac
200 → 240 V ac
Manu. Part No.
XF Series
Height 75 mm
Depth 53.5 mm
Manu. Part No.
XF-D2.24.2/RS
XF-D2.115.2/RS
XF-D2.220.2/RS
XF-D2.220.3/RS
Stock no.
XF-D2.24.2/RS
XF-D2.115.2/RS
XF-D2.220.2/RS
XF-D2.220.3/RS
260-454
260-476
260-498
260-505
Price per
unit
unit
unit
unit
OM
S$
1+
1+
1+
1+
148·50
142·00
142·00
142·00
Contact Rating - Resistive Load
Reset Accuracy
Depth
Height
Width
Manu. Part No.
Stock no.
80.61.0.240.2000
221-080
Price per
OM
unit
138·00
132·00
132·00
132·00
S$
12+
12+
12+
12+
135·00
129·50
129·50
129·50
8 A @ 250 V ac
± 5% ms
61 mm
87 mm
17.5 mm
93·00
92·90
93·00
unit
unit
unit
OM
S$
1+
1+
1+
10·30
3·70
6·85
386-1044
H3CR-H8LAC/DC24M
24Vac/dc
DPDT
5A 250Vac/30Vdc
Minutes
-10 to 55°C
10 x 106 operations
1 x 105 operations
Stock no.
24Vac/dc Off-delay
200-240Vac Off-delay
S$
S$
S$
1+ 150·50
6+ 138·50
12+ 135·50
386-1044
386-1050
6+
6+
6+
91·20
91·10
91·20
6+
15+
25+
10·10
3·63
6·40
S$
S$
S$
12+
25+
100+
9·90
3·60
6·25
Price per
unit
unit
386-1050
H3CR-H8LAC100-240M
24Vac/dc
DPDT
5A 250Vac/30Vdc
Minutes
-10 to 55°C
10 x 106 operations
1 x 105 operations
OM
S$
1+
1+
89·00
89·00
S$
5+
5+
87·00
83·00
S$
10+
10+
86·50
81·00
Tamperproof - Zelio RE7R
Height
78 mm
Depth
80 mm
Output Contacts
SPDT
DPDT
78.8 mm
96 mm
24 → 240 Vac/dc
0.15 s → 10 min
DPDT
Manu. Part No.
Stock no.
87.62.0.240.0000
511-7311
Price per
OM
unit
S$
S$
S$
1+ 215·00
6+ 197·00
12+ 193·00
0.05 s → 10 min
Time Range
Supply Voltage (Vac/dc)
24 → 240
24 → 240
Manu. Part No.
Stock no.
RE7RB11MW
RE7RB13MW
407-1961
609-8356
Price per
unit
unit
OM
Stock no.
407-1961
609-8356
S$
S$
S$
1+ 160·30
1+ 185·60
6+ 155·50
12+ 152·30
Delta D6A - True Off Delay Timer
Chronos 2
Function - 311
Wide input range
Contact Rating: 5A @ 250Vac
4 time ranges: 1s / 10s / 1min / 3min
Adjustment ranges: 100ms / 1s / 6s / 18s
IP40 - Industrial Design
Function - 311
Self-extinguishing case
Contact rating: 5A @ 250Vac
22.5mm wide
Approvals: UL listed / UL listed for Canada
Standards: IEC1812-1, EN 50081-1/2, EN 50082-1/2
1360
1+
1+
1+
S$
Function - 311
Sealable transparent cover protects settings
Contact rating: 5A @ 250Vac
Approvals: UL, CSA
Standards: IEC 61812-1
Height
Depth
Supply Voltage
Time Range
Contact Configuration
88 865 265
S$
DIN, Analogue-set Off-delay timer, four selectable ranges
Timer Function - 311
Extended power-OFF delay timer, up to 12 minutes
8-pin octal plug-in base
Red LED output indicator
Description
Functions - 311
AgCdO contact material
22.5mm wide
Manu.
Part No.
Price per
329-468
342-916
403-853
Stock no.
Omron part no.
Supply voltage
Output contacts
Contact rating
Timing units
Operating temperature
Mechanical life (no load)
Electrical life (250Vac 5A)
87.6 Series
Height
Depth
Contact Configuration
OM
Solid-State Off-delay Timer H3CR-H
1⁄16
Function - 311
4 time ranges
Rotary range selector and timing trimmer
Wide voltage range
Contact material: AgNi
311
0.1 s → 20 s
24 → 240
24 → 240
SPDT
unit
unit
unit
Stock no.
8 Pin DIN Rail Socket
Panel Mount Adaptor
Fingerproof Reversed Socket
80 Series - True Off Delay timer
Timer Function
Time Range
Supply Voltage (Vac)
Supply Voltage (Vdc)
Contact Configuration
188-4613
349-1279
188-4629
Description
S$
6+
6+
6+
6+
Price per
Stock no.
188-4613
349-1279
188-4629
Accessories
Contact Configuration
DPDT
Contact Rating - Resistive Load
5 A @ 240 V ac
Supply Voltage
Time Range
Stock no.
24 Vac/V(dc)
1 s → 30 s
260-454
260-476
115 Vac
1 s → 30 s
260-498
230 Vac
1 s → 30 s
230 Vac
0.1 min → 3 min
260-505
Manu. Part No.
Stock no.
H3CR-H8L AC/DC24 M
H3CR-H8L AC100-120 M
H3CR-H8L AC200-240 M
Function - 311
LED indication of power on
22.5mm wide
Note: Care should be taken to observe the minimum start and reset time of
100ms.
Standards: EN50081-1, EN50082-2
DPDT
5 A @ 230 V ac
0.05 min → 12 min
78 mm Supply Voltage
95 mm Time Range
DPDT
Stock no.
Price
per
349-6858
unit
OM
24 Vdc; 24 → 240 V ac
0.6 s → 160 s
S$
S$
S$
1+ 130·00
6+ 122·00
12+ 119·50
Product Index
Time Range
Supply Voltage (ac-dc)
Output Contacts
Depth
Stock no.
OM = Order Multiple a New product to range
a713-9805
True Off Delay
1s → 3 min
24 → 240 Vac/dc
SPDT
70 mm
Price per
unit
Height
Manufacturer Timer Function
Mounting Type
Series
Width
OM
S$
1+ 122·00
64 mm
A
Din Rail
DELTA
22.5 mm
S$
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
On Pulse
Manu. Part Timer Function
No.
CT-VWD
88 865 125
88 865 145
Functions - 421
Parallel load to the voltage related control inputs is possible
Wide voltage range
LEDs for status indication
Operating temperature range: 20 to +60°C
Contact material: AgSn02
22.5mm wide
Approvals: UL listed / UL listed for Canada, GL, GOST, c-Tick
Standards: IEC/EN 61812-1. DIN VDE 0435 pt 2021
Stock no.
1SVR 500 130 R 0000
Price per
489-7189
OM
S$
1+
97·50
unit
S$
6+
91·50
S$
12+
Price per
442-8890
OM
S$
1+
66·00
unit
Height
80 mm
Supply Voltage (Vac)
Width
55 mm
Contact Rating - Resistive Load
Panel Cut Out 80 x 55 mm
Manu. Part No.
88 256 401
88 256 404
88 256 469
88 256 509
88 256 511
Depth (mm)
72
72
72
83.5
83.5
Manu. Part No.
Contact Configuration SPDT
Contact/Output Rating - Resistive Load 4A at 250V
Supply Voltage
24 Vac/dc; 220 → 240 V ac Time Range
0.1 s → 10 s
Stock no.
unit
unit
S$
1+
1+
85·50
78·50
S$
6+
6+
80·50
74·00
S$
12+
12+
78·50
72·00
S$
6+
62·00
S$
12+
56
115 → 230
16 A @ 230 V ac
89·50
Functions- 421
Direct reading scales for fast positive adjustment
LEDs for status indication
Operating temperature range: -20°C to +60°C
Contact material: AgCdO
22.5mm wide
Approvals: UL listed / UL listed for Canada, GL, GOST, c-Tick
Standards: IEC/EN 61812-1
1SVR 550 137 R1100
363-1310
363-1326
OM
Function: 421
SPDT: the motor is wired via the N/O contact of the micro-switch,
the load being wired to the N/C contact of the same switch
DPDT: the motor is wired via the N/O contact of a 2nd micro-switch,
which operates after the 1st one, which is used to switch the load.
Graduated knob displays the unit of measurement (min or hr)
CT-VWE
Manu. Part No.
On Pulse: 451
On Pulse: 421, 441
Price per
Open Frame, Manual Reset
Contact Configuration
SPDT
Supply Voltage 24 → 48 Vdc; 24 → 240 V ac
Contact/Output Rating - Resistive Load 8A at 250V Time Range 0.05 s → 100 h
Manu. Part No.
Stock no.
Contact Configuration
SPDT
SPDT
SPDT
DPDT
DPDT
Stock no.
88 256 401
88 256 404
88 256 469
88 256 509
88 256 511
Price per
328-178
328-184
328-190
328-213
328-229
unit
unit
unit
unit
unit
Time Range
0 min → 5 min
0 min → 60 min
0h→5h
0 min → 60 min
0h→5h
OM
S$
1+
1+
1+
1+
1+
119·50
119·50
119·50
168·00
168·00
Stock no.
328-178
328-184
328-190
328-213
328-229
S$
6+
6+
6+
6+
6+
110·00
110·00
110·00
154·50
154·50
S$
12+
12+
12+
12+
12+
107·50
107·50
107·50
151·50
151·50
60·50
80 Series - On Pulse Timer
M1EIN
Function - 421
6 time ranges
Wide voltage range
Contact material AgCdO
Function - 421
LED indication for supply and relay status
Flame retardant housing to UL 94V-0
Can also be surface mounted
CE marked
17.5mm wide
Approvals: UL recognised component for Canada and US
Height
Depth
Contact Configuration
Stock no.
89 mm Supply Voltage
59 mm Contact Rating - Resistive Load
SPDT Time Range
Price per
296-7371
unit
OM
S$
1+
74·00
24 Vac/dc; 230 V ac
8 A @ 250 V ac
0.5 s → 10 s
S$
6+
69·00
S$
12+
67·50
Chronos 2 - MBRI
Stock no.
Price
per
OM
S$
88 826 125
363-1297
unit
1+
68·50
24 Vdc; 24 → 240 V ac
8 A @ 250 V ac
1 s → 100 h
S$
Stock no.
80.21.0.240.0000
221-109
6+
64·50
12+
63·00
Functions - 421, 441
Self extinguishing case
AgNi Contact Material
17.5mm wide
Approvals: UL listed / UL listed for Canada
Standards: IEC1812, EN50081-1/2, EN50082-1/2
Price
per
OM
S$
88 826 145
363-1304
unit
1+
68·50
S$
1+
77·00
S$
6+
71·00
S$
12+
69·50
Height
Width
45.5 mm
47.5 mm
Depth
12+
12+
38·60
37·40
30 mm
Time Range
Stock no.
536-2555
536-2779
Price per
unit
unit
OM
S$
1+
1+
42·90
41·60
S$
6+
6+
39·50
38·30
S$
Star Delta
CT-D - time relays, star-delta
81 mm Supply Voltage
60 mm Contact Rating - Resistive Load
SPDT Time Range
Stock no.
unit
OM
Can be manually reset during the run-back period
DPDT contact configuration
Contact rating: 16A @ 250Vac resistive load
Connection via 6·35 x 0.8 mm terminals suitable for 0·25in receptacles
Minimum panel thickness (with screws provided) of 3.5mm
0 min → 30 min
0 min → 120 min
Manu. Part
No.
Price per
16 A @ 250 V ac
± 5% ms
61 mm
89 mm
17.5 mm
S$
Chronos 2 - MHRI
Height
Depth
Contact Configuration
Manu. Part No.
Contact Rating - Resistive Load
Reset Accuracy
Depth
Height
Width
Mechanical Run-back Timer
81 mm Supply Voltage
60 mm Contact Rating - Resistive Load
SPDT Time Range
Manu. Part
No.
421
0.1 s → 20 h
24 → 240
24 → 240
SPDT
Run Back
Function - 451
Self extinguishing case
AgNi Contact Material
17.5mm wide
Approvals: UL listed / UL listed for Canada
Standards: IEC1812, EN50081-1/2, EN50082-1/2
Height
Depth
Contact Configuration
Timer Function
Time Range
Supply Voltage (Vac)
Supply Voltage (Vdc)
Contact Configuration
24 Vdc; 24 → 240 V ac
8 A @ 250 V ac
1 s → 100 h
S$
6+
64·50
S$
12+
63·00
On Pulse - Chronos 2
Self-extinguishing case
22.5mm wide
Approvals: UL listed / UL listed for Canada
Standards: IEC1812-1, EN 50081-1/2, EN 50082-1/2
Height
78 mm Supply Voltage
24 Vdc; 24 → 240 V ac
Depth
95 mm Contact/Output Rating - Resistive Load 8A at 250V
Contact Configuration SPDT Time Range
0.1 s → 100 h
Electronic time relay
Function: 711 - star-delta
Wide range input
5 A to 250 V contact capacity
Simple adjustment via potentiometer with absolute display
LEDs for status display
Approvals: CE, UL
Series
CT-D
Size
17.5 mm
Supply Voltage 24-48V DC, 24-240 V AC Connection Type
Connecting Terminal
Output Contacts 2 N/O
Operating Temperature Range -20 to +60°C °C
Time Range
Manu. Part No.
Stock no.
185-025
0.05 s → 10 mins (4 ranges), fixed transit time 50 ms 1SVR500211R0100
185-110
0.05 s → 10 mins (4 ranges), adjustable transit time 1SVR500210R0100
Description
Star-Delta Time Relay
Star-Delta Time Relay
Stock no.
185-025
185-110
Price per
unit
unit
OM
S$
S$
S$
1+ 152·00
1+ 162·00
Many more leading brands from over 2,500 suppliers available online
1361
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Counters, Timers & Hour Meters
CT-SDS - Star Delta
Recyclers
Function - 711
7 time ranges
50ms transition time
Double-chamber cage connecting terminals
Operating temperature: -25°C to +60°C
22.5mm wide
Approvals: cULus, GL, GOST, CCC, CE, C-tick
Standards: IEC/EN61812-1
56
Stock no.
CT-SDS.22
CT-SDS.23
Functions - 611
Wide voltage range
LEDs for status indication
Contact rating: 8A @ 250Vac
SPDT contacts
Operating temperature range: -20°C to +60°C
Contact material: AgSnO2
Approvals: UL listed / UL listed for Canada, GL, GOST, c-Tick
Standards: IEC/EN 61812-1, DIN VDE 0435 pt 2021
4 A @ 250 V ac Time Range 0.05 s → 10 min
DPST
Supply Voltage (V ac)
Stock no.
333-852
24 → 48 Vdc; 24 → 240
380 → 440
333-789
Contact Rating - Resistive Load
Contact Configuration
Manu. Part No.
CT-SDS.22
CT-SDS.23
Manu. Part No.
CT-EBD (Symmetrical)
Price per
333-852
333-789
OM
unit
unit
Height
Width
Depth
S$
S$
S$
1+ 126·00
1+ 145·00
6+ 118·50
6+ 136·50
12+ 116·00
12+ 133·50
70 mm
22.5 mm
58 mm
0.05 s → 100 h
24 → 48 Vdc; 24 → 240 V ac
Time Range
Supply Voltage
Manu. Part No.
Stock no.
CT-EBD
489-7195
Price per
OM
unit
1+ 100·00
22.5mm – Chronos 2 TQR1
CT-TGD (Asymmetrical)
Function - 711
Self - extinguishing case
Approvals: UL listed / UL Listed for Canada
Standards: IEC1812-1, EN50081-1/2, EN50082-1/2
Functions - 651, 652, 661, 662
Wide voltage range
LEDs for status indication
Contact rating: 8A @ 250Vac
Operating temperature range: -20°C to +60°C
Contact material: AgSnO2
Approvals: UL listed / UL listed for Canada, GL, GOST,
c-Tick
Standards: IEC/EN 61812-1, DIN VDE 0435 pt 2021
Height
Width
Depth
Contact Configuration
78 mm Supply Voltage
22.5 mm Contact Rating - Resistive Load
95 mm Time Range
SPDT
Manu. Part No.
Stock no.
88 865 175
331-1094
Price per
unit
24 Vdc; 24 → 240 V ac
8 A @ 250 V ac
0.1 s → 100 h
OM
S$
1+
83·00
S$
6+
78·00
76·50
H3CR-G8EL AC200-240
386-1038
unit
OM
S$
1+
82·00
Supply Voltage
Width
22.5 mm
Depth
Contact
Configuration
80 mm
DPDT
Contact Rating Resistive Load
Time Range
Manu. Part No.
Stock no.
RE7YA12BU
RE7YR12BU
423-6742
609-8378
Price per
S$
5+
81·50
S$
10+
81·00
1362
unit
Output Contacts
22.5
58
2-changeover
489-7202
185-104
Time Range
Supply Voltage
Stock no.
0.05 s → 100 h 24 → 48V DC, 24 → 240
Vac
0.05 s → 100 h 24 → 48V DC, 24 → 240 V
AC
SPDT
Stock no.
Height
Width
75 mm
27 mm
Price per
OM
unit
unit
Depth
Supply Voltage
Manu.
Part No.
Stock no.
Price
per
XT-D1
XT-D1-H
341-395
224-1304
unit
unit
0.05 s → 300 h
S$
S$
S$
1+ 130·40
1+ 128·60
6+ 126·50
12+ 123·90
Height
Width
Depth
Contact Configuration
Contact Rating - Resistive Load
Mounting Type
Supply Voltage
Time Range
Manu. Part No.
XT-S1/RS
489-7202
185-104
S$
S$
S$
1+ 124·00
1+ 187·00
6+ 116·50
12+ 114·00
53.5 mm
10.5 → 265 Vac/dc
OM
S$
S$
S$
1+ 137·00
1+ 137·00
6+ 127·50
6+ 127·50
12+ 124·50
12+ 124·50
75 mm
27 mm
53.5 mm
SPDT
8 A @ 230 V ac
11 pin plug in
12 → 240 Vac/dc
0.6 s → 60 min
Stock no.
329-216
Price per
unit
OM
S$
S$
S$
1+ 133·00
6+ 123·50
12+ 121·00
Accessories
24 → 240
500 ms → 3 min
5 A @ 250 V ac
DPDT
103 mm
90 mm
Supply Voltage (ac-dc)
Time Range
Contact Rating - Resistive Load
Contact Configuration
Depth
Height
160-256
92·00
Functions - 651, 652
LED indication of output relay
energisation
Supply frequency 40 - 440 Hz
AgNi Contact material
Standards: EN 50081-1, EN 50082-2
24 Vac/dc; 42 → 48 Vac/
dc; 110 → 240 V ac
8 A @ 240 V ac
Function - 711
Industrial design
Zoom voltage 24-240Vac/dc
22.5mm wide
Price per
12+
Functions - 651, 652
LED indication of output relay energisation
Contact rating: 8A @ 250Vac
SPDT contacts
Standards: EN50081-1, EN50082-2
Gamma Series - G2ZS20
Stock no.
94·00
11 Pin Asymmetric – XT Series
OM
unit
unit
6+
S$
Asymmetrical Timer, 27mm –
Type XT
Function - 712
LEDs indicating relay energisation and time delay
Sealable transparent cover protects settings
Approvals: UL,CSA.
Standards: IEC 61812-1
78 mm
Depth
(mm)
58
CT-TGD.12 SPCO
CT-TGD.22 DPCO
22.5mm - Zelio RE7Y
Height
Width
(mm)
22.5
Description
Supply voltage
200 to 240 Vac
Output contacts:
Star operation circuit
SPNO*
Delta operation circuit
SPNO*
Instantaneous
SPNO
Connections
8-pin octal base
Operating/reset method
Self-resetting after removal of supply (0.5s min.)
Operating temperature range
-10°C to +55°C
*Star and Delta outputs share a common connection
Price per
Height
(mm)
70
70
An 8-pin plug-in DIN 48 x 48mm solid-state Star-Delta timer
Timing function 711
Wide star time range of 0.5 to 120 seconds in 4 overlapping ranges
Selectable Star-Delta transfer time of 0.05 to 0.5 seconds in 4 steps
Includes separate N/O instantaneous contact
Stock no.
S$
S$
12+
Star Delta Timer solid state H3CR-G
Manu. Part No.
S$
OM
Description
DIN Rail Surface Mount Base
S$
S$
1+ 158·50
6+ 146·00
S$
OM = Order Multiple a New product to range
Stock no.
342-922
Price per
unit
OM
S$
1+
16·60
S$
15+
16·30
S$
25+
16·00
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
8 Pin Asymmetrical– H3CR–F8
Asymmetrical Recycler –M1ARM
Functions - 651, 652
LED indication of supply and relay status
Multi-voltage supply
Flame retardant housing UL 94V-0
Can also be surface mounted
17.5mm wide
Height
Depth
Supply Voltage
89 mm
59 mm
24 → 240 Vac/dc
Manu. Part No.
Contact Rating - Resistive Load
Time Range
Stock no.
M1ARM 24-240VAC/DC
440-9350
Price per
8 A @ 250 V ac
0.5 s → 60 min
OM
unit
Functions - 651
Supply frequency range (ac types) 50-60Hz
44.8 x 44.8mm panel cut out
Note: Not supplied with panel mount adaptor which must be
purchased separately see stock no. 342-916.
Approvals: UL, CSA
Standards: EN 50081-1, EN 50082-2
S$
S$
S$
1+ 124·50
6+ 116·00
12+ 113·50
Stock no.
Price
per
331-1044
unit
88 826 155
8 A @ 250 V ac
1 s → 100 h
S$
S$
S$
1+ 110·00
6+ 102·50
12+ 100·00
Manu. Part No.
Stock no.
88 865 155
331-1088
Price per
OM
unit
Width
48 mm
Depth
Contact
Configuration
80 mm
2 x SPDT
Contact Rating Resistive Load
Supply Voltage
Time Range
Manu. Part No.
Stock no.
TMR48L
467-6881
Price per
unit
S$
S$
S$
1+ 136·00
6+ 128·00
12+ 125·00
Stock no.
DIN Rail Surface Mount Base
342-922
Price per
unit
Stock no.
12 → 24 Vdc; 24 →
240 V ac
0.02 s → 300 h
OM
S$
S$
S$
1+ 161·00
5+ 157·00
10+ 153·00
OM
S$
1+
16·60
Contact Rating - Resistive Load
Time Range
Stock no.
80.91.0.240.0000
446-0406
Price per
unit
Price per
unit
unit
0.05s to 30h
8-pin octal
100 to 240Vac
-10°C to +55°C
Stock no.
386-1000
386-1016
OM
S$
1+
1+
10·30
3·70
S$
6+
15+
10·10
3·63
S$
12+
25+
9·90
3·60
20x106 operations min.
10x104 operations min.
DPDT 5A 250Vac 30Vdc
Mechanical life (no load)
Electrical life (5A 250VAC)
Output relay contacts
Price per
unit
unit
OM
S$
1+
1+
92·50
94·00
S$
5+
5+
87·50
93·50
S$
10+
10+
87·00
93·00
OM
Supply Voltage 24 → 240 Vac/dc
Output Contacts SPDT
Price per
unit
OM
S$
1+
80·20
S$
S$
S$
15+
16·30
S$
25+
16·00
The RE11 series of timers from Schneider replaces and updates
the RE7 series. This specific range of "asymmetrical flashing"
timers offers a large timing range, easy mounting via 35mm
symmetrical DIN rail and a high mechanical life of up to
100000000 cycles.
Large timing range of 0.1 seconds → 100 hours
Mounting type: 35 mm symmetrical mounting rail
Mechanical life of up to 100000000 cycles
Operating temperature range between: -20 → +60 °C
Repeat accuracy of +/- 0.5 % conforming to IEC 61812-1
Protection class rating: IP20 (terminal block), IP40 (housing) and IP50 (front panel)
Termination type: (screw terminals, clamping capacity: 1 x 4 mm2 without cable
end), (screw terminals, clamping capacity: 2 x 1.5 mm2 with cable end) and
(screw terminals, clamping capacity: 2 x 2.5 mm2 without cable end)
17.5 mm width package style
Approvals: CSA, CULus, CE
Standards: IEC 61812-1
Product Index
Asymmetrical
RS Timer Function
651, 652
Description
Asymmetrical Flashing Relay 24 - 240 Vac
Asymmetrical Flashing Relay 12 Vac/dc
Asymmetrical Flashing Timer 24 - 240 Vac
16 A @ 250 V ac
0.1 s → 20 h
Description
Manu. Part No.
6+ 102·90
6+ 137·20
Asymmetrical Flashing Timers - RE11
Series
5 A @ 230 V ac
Functions – 652 and 662
AgCdO contact material
17.5mm wide
84 mm
59 mm
12 → 240 Vac/dc
1+ 105·00
1+ 140·00
S$
Switch between flicker-OFF or flicker-ON start mode
Independent ON time and OFF time settings
Eight time ranges from 0.1 s → 1200 h
Output type: Relay, SPDT
DIN rail track mounting
6 terminals
Power reset: Minimum power-OFF time: 0.1 s
Insulation resistance: 100 MΩ min. at 500 Vdc
Protection class rating: IP30 (Terminal block: IP20)
Approvals: CE, cURus, CCC, LR
a733-4928
Asymmetrical Recycler - 80 Series
Height
Depth
Supply Voltage
329-468
342-916
Product Index
Symmetrical/Asymmetrical
RS Timer Function 651, 652
Time Range
0.1 s → 1200 h
Accessories
Description
S$
Asymmetrical Recycler - H3DK-F
Function: 651
Panel mount or base and DIN rail mount using relay socket
2 LED status indicators
Gate inhibit on all timing functions
Precision timing by micro-controller
For base, please see stock number 509-1219
48 mm
Stock no.
H3CR-F8 AC100-240
H3CR-F8N AC100-240
11 Pin Asymmetric – TMR48L
Height
Description
Manu. Part No.
0.1 s → 100 h
24 Vdc; 24 → 240 V ac
Time Range
Supply Voltage
unit
unit
56
S$
Accessories
Timing range
Terminals
Supply voltage
Operating temperature range
Functions - 651, 652
Self-extinguishing case
Contact rating: 8A @ 250Vac
SPDT contacts
Approvals: UL/UL listed for Canada
Standards: IEC1812-1, EN 50081-1/2, EN 50082-1/2
78 mm
22.5 mm
95 mm
188-4578
188-4584
OM
DIN solid state analogue setting asymmetric recycling timers with 8pin octal style plug-in connections
Timing function 651, 652
12 setting ranges cover a wide span of 0.05s to 30h
Independent long or short ON/OFF time settings are possible
Wide power supply range 100 to 240Vac
Both OFF start and ON start functions available
Asymmetrical, 22.5mm – Chronos 2
TLR1
Height
Width
Depth
24 Vac/dc
100 → 240 V ac
Price per
1⁄16
Contact Rating - Resistive Load
Time Range
OM
Stock no.
Solid State Asymmetric Recycler
Functions - 651, 652
Self extinguishing case
AgNi contact material
17.5mm wide
Approvals: UL listed / UL Listed for Canada
Standards: IEC1812-1, EN50081-1/2, EN50082-1/2
Manu.
Part No.
Supply Voltage
8 Pin DIN Rail Socket
Panel Mount Adaptor
Asymmetrical Recycler – Chronos 2
MLR1
Height
81 mm
Depth
60 mm
Supply Voltage 24 Vdc; 24 → 240 V ac
0.05 s → 30 h
DPDT
5 A @ 230 V ac
Height 48 mm Time Range
Width 48 mm Contact Configuration
Depth 84 mm Contact Rating - Resistive Load
S$
S$
S$
1+ 113·50
6+ 104·50
12+ 102·00
Asymmetrical Flashing Relay 24 240 Vac
Asymmetrical Flashing Relay 12
Vac/dc
Asymmetrical Flashing Timer 24 240 Vac
Stock no.
Time Range
0.1 s → 100 h
Supply Voltage
24 → 240 Vac
12 Vac/dc
24 → 240 Vac
Price
per
OM
S$
a738-8666
unit
1+ 108·00
a738-8669
unit
1+ 108·00
a738-8644
unit
1+
Stock no.
738-8666
738-8669
738-8644
S$
S$
96·00
Visit our website for additional price information and exciting promotions
1363
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Counters, Timers & Hour Meters
Enya Series - E1ZI10 Asymmetric
Talento 371 plus
Functions - 651, 652
Installation design
7 time ranges
Wide voltage range
17.5mm wide
12 → 240 Vac/dc
50 ms → 100 h
8 A @ 250 V ac
Supply Voltage
Time Range
Contact Rating - Resistive Load
Contact Configuration
Depth
Height
Flexible button assignment
Manual switch: automatic/preselection, Fix ON/Fix OFF
Non-volatile memory (EEPROM)
Free weekday block formation
Summer/Winter time changeover: automatic or freely selectable
Switching capacity: 16A @ 250vac
SPDT
60 mm
87 mm
Supply Voltage
Function
Number of Channels
Output Contacts
56
Manu. Part No.
Stock no.
E1ZI10 12-240V AC/DC
Price per
160-278
unit
OM
S$
1+ 120·50
S$
6+ 111·00
230 V ac
24 hr/7 day
1
SPDT
Stock no.
S$
Price per
388-420
12+ 108·50
Battery Back-Up
Number Of Switching Operations
Panel Cut Out
Size
OM
unit
3 yrs
50 memory locations
46 x 36 mm
H45 x W35 x D60 mm
S$
S$
S$
1+ 150·00
6+ 139·50
12+ 136·50
Talento 372 plus
Flexible button assignment
Manual switch: automatic/preselection, Fix ON/Fix OFF
Non-volatile memory (EEPROM)
Free weekday block formation
Summer/Winter time changeover: automatic or freely selectable
Switching capacity: 16A @ 250vac, 800mA @ 24Vdc
50 memory locations
Dimensions: H45 x W17.5 x D60mm
Analogue
17.5mm 24 Hour Time Switches
Time switches for DIN-rail mounting
Daily program
Captive setting keys
Manual overide switch, Permanently ON / AUTO
Supply Voltage
Contact Rating - Resistive Load
Function
Contact Configuration
Number of Channels
Resolution
230 V ac
16 A
24 hr
SPNO
1
15 min
Description
Contact Rating - Inductive Load
Frequency
Number Of Switching Operations
Operating Temperature Range
Power Consumption
Segment Length
Stock no.
Timer w/70 hr battery reserve
Price per
271-366
unit
OM
S$
1+ 107·00
Supply Voltage
Function
Number of Channels
Output Contacts
1.5 A
50/60 Hz
96
-5 → +50 °C
1 VA
15 min
Stock no.
99·50
S$
12+
97·50
Time switches for DIN-Rail mounting
Daily program
Captive setting keys
Manual overide switch: Permanently ON / Permanently OFF / Auto
16 A
24 hr
SPDT
1
30 min
1.5 A
50/60 Hz
Battery Back-Up-Hrs
Number Of Switching Operations
Operating Temperature Range
Power Consumption
Segment Length
Supply Voltage
Battery Back-Up-Hrs
Stock no.
70
Price per
271-388
unit
OM
Stock no.
329-711
S$
S$
S$
1+ 127·00
6+ 119·50
12+ 117·00
35mm 7 Day Time Switch - 12 Series
Internal battery for set up without supply
Impulse output function 1s - 59s
Automatic adjustment for daylight saving
Single channel
Power back up of 6 year after first operation
230 V ac
SPDT
16 A
3W
Manu. Part No.
Stock no.
12.21.8.230.0000
159-470
Price per
unit
OM
30 programs
90 mm
35 mm
44 mm
S$
S$
1+ 157·00
6+ 144·50
Manu. Part No. Supply Voltage
12.22.0.024.0000 24 Vac/dc
12.22.8.230.0000 230 V ac
Stock no.
666-7864
159-464
Price per
unit
unit
OM
1+ 189·00
1+ 182·00
6+ 174·00
6+ 167·50
OM = Order Multiple
S$
12+ 133·00
512-5570
Price per
OM
unit
1.5 VA
100 h
28
S$
S$
1+ 182·50
6+ 169·50
S$
MicroRex Plus
230 V ac
SPDT
10 A
Stock no.
604 777
512-5586
Power Consumption
Minimum Setting Time
Number of Channels
Price per
OM
unit
1.5 VA
60 s
2
S$
S$
1+ 192·00
6+ 178·50
SC18.10 pro
S$
Holiday function
16A switching capacity
Permanently ON or OFF with manual switch
Manual override
Unrestricted block programming of days
Fully automatic daylight saving time
Elapsed time and pulse counter
Pulse function: Automated switch OFF timer up to 59:59 (mm:ss)
Security by PIN coding
Supply Voltage
Function
Number of Channels
Output Contacts
1364
S$
6+ 136·00
230 V ac Power Consumption
SPDT
Battery Back-Up-Hrs
16 A
Number Of Memory Locations
Stock no.
Manu. Part No.
Stock no.
666-7864
159-464
S$
S$
1+ 146·00
Simple to program
Weekday and weekend programming
Manual advance/over-ride (ON/OFF)
Automatic summer/winter settings
Minimum setting time of 1 minute
Single channel
Dimensions (mm): H83, W36, D66
Standards: EN 60730-1 and EN 60730-2-7
Supply Voltage
Contact Configuration
Contact Rating - Resistive Load
90 mm
35.8 mm
60 mm
S$
56/week
100 h
17.5 mm
Simple to program
Weekday and weekend programming
Manual advance/over-ride (ON/OFF)
Automatic override (ON/OFF) for holidays, weekends or bank holidays up to
99 days successively
Automatic summer/winter settings
Standards: EN 60730-1 and EN 60730-2-7
Internal battery for set up without supply
Impulse output function 1s - 59s
Automatic adjustment for daylight saving
2 channel
Power back up of 6 year after first operation
DPDT
Height
16 A
Width
30 programs
Depth
1 min
Supply Voltage
24 Vac/dc
230 V ac
S$
MicroRex Plus
604 774
S$
OM
unit
Manu. Part No.
35mm, 7 Day Time Switch - 12 Series
Output Contacts
Contact Rating - Resistive Load
Number Of Switching Operations
Minimum Setting Time
Power Consumption
1.4 W
2 VA
S$
6+ 188·00
230 V ac Number Of Switching Operations
SPDT
Battery Back-Up-Hrs
16 A
Width
2.5 VA
Price per
Supply Voltage
Contact Configuration
Contact Rating - Resistive Load
Number Of Switching Operations
Height
Width
Depth
S$
1+ 200·00
Micro Rex D11
Supply Voltage
Contact Configuration
Contact Rating - Resistive Load
Power Consumption
48
-5 → +50 °C
1 VA
30 min
230 V ac
70
Digital
Supply Voltage
Contact Configuration
Contact Rating - Resistive Load
Power Consumption
OM
unit
3 yrs
50 memory locations
46 x 36 mm
H45 x W35 x D60 mm
7 Day
Single channel
Manual override and memory back-up
Sealable front cover
8 memory locations
Minimum setting time of 1 minute
24 Hour Time Switches
Contact Rating - Resistive Load
Function
Contact Configuration
Number of Channels
Resolution
Contact Rating - Inductive Load
Frequency
Battery Back-Up
Number Of Switching Operations
Panel Cut Out
Size
Price per
388-426
S$
6+
230 V ac
24 hr/7 day
2
DPDT
230 V ac Battery Back-Up
24hr/7day Number Of Switching Operations
1
Size
SPST
6 years
30 memory locations
35 mm
S$
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
Accessories
Manu. Part No.
Stock no.
SC 18.10 PRO
Price per
453-924
OM
unit
S$
S$
S$
1+ 122·00
6+ 114·50
12+ 112·00
SC28.13 pro 1 Channel Astro
35mm
230 V ac Battery Back-Up
24hr/7day Number Of Switching Operations
1
Size
SPDT
Manu. Part No.
Stock no.
SC 28.13 PRO
Price per
453-918
6 years
60 memory locations
35 mm
OM
unit
S$
S$
1+ 160·00
6+ 150·50
S$
SC28.23 pro 2 Channel Astro
35mm
Astro Program: Automated switching in relation to sunset and sunrise
Holiday function
Switching capacity 16A per channel
Permanently ON or OFF with manual switch
Manual override
Unrestricted block programming of days
Fully automatic daylight saving time
Elapsed time and pulse counter for each channel
Security by PIN-Coding
Supply Voltage
Function
Number of Channels
Output Contacts
230 V ac Battery Back-Up
24hr/7day Number Of Switching Operations
2
Size
2 x SPDT
Manu. Part No.
Stock no.
SC 28.23 PRO
Price per
453-912
6 years
60 memory locations
35 mm
OM
unit
S$
S$
1+ 199·00
6+ 185·00
S$
7 Day SPDT Timeswitch
Manu. Part
No.
23141
Price
per
104-480
unit
OM
Power Consumption
Battery Back-Up
Width
104-468
Price per
unit
S$
S$
S$
1+ 139·00
6+ 130·50
12+ 128·00
56/week
230 V ac
DPDT
16A @ 250 V ac
OM
Power Consumption
Segment Length
Battery Back-Up
Width
Function
Number of Channels
Contact Configuration
Supply Voltage
Contact Rating - Resistive Load
Minimum Setting Time
Display Type
Battery Back-Up
Height
Width
Depth
270·00
S$
6+
S$
245·00
56
Annual, weekly
4
4PDT
120 / 230 V ac
16 A
1s
LCD
5 years
83 mm
107.7 mm
66 mm
Manu. Part No.
Stock no.
Price
per
OM
S$
AlphaRex DY64
133-046
unit
1+
730·00
S$
S$
1+ 177·00
6+ 166·50
Function
Supply Voltage
Contact Rating - Resistive Load
Power Consumption
Minimum Setting Time
Display Type
Battery Back-Up
Height
Width
Depth
Description
D21 1-channel time switch
D22 2-channel time switch
6 VA
1 min
5 years
35 mm
S$
17.5mm 7 Day Time Switch - 12 Series
Internal battery for set up without supply
Impulse output function 1s - 59s
Automatic adjustment for daylight saving
Power back up of 6 year after first operation
Single channel
Description
D21 1-channel time switch
D22 2-channel time switch
S$
S$
Stock no.
666-7873
159-717
Price per
unit
unit
Stock no.
Price
per
S$
S$
S$
133-080
133-074
unit
unit
1+ 51·50
1+ 225·00
6+ 48·40
6+ 210·00
OM
12+
47·40
24hr or 7 day
230 V ac
16 A
1W
1 min
LCD
6 years
83 mm
35 mm
50 mm
Number of Channels
Contact Configuration
1
SPDT
2
DPDT
Stock no.
133-068
133-119
Price per
unit
unit
OM
S$
S$
1+ 196·50
1+ 215·00
6+ 182·50
6+ 200·00
Stock no.
133-068
133-119
S$
Accessories
Output Contacts
SPDT
Height 90 mm
Contact Rating - Resistive Load 16 A
Width 17.5 mm
Number Of Switching Operations 30 programs Depth 60 mm
Supply Voltage
Power Consumption
Stock no.
24 Vac/dc
1.4 W
666-7873
230 V ac
2 VA
159-717
12.71.0.024.0000 24 Vac/dc
12.71.8.230.0000 230 V ac
S$
1+
Easy text-based programming directly via front panel or program via a PC using
optional software and data key. Data keys can be used to transfer programmes
between units or used to securely store back-up data
24 hour or 7 day
Built in hour counter up to 65,535 hours with reset
56 programs
Optional automatic summer/winter time change
Random function and Manual override (permanent ON or OFF until manual
reset)
Transparent cover seals with or without data key inserted
D21 also has a pulse function: 84 starts from 1 second to 59 minutes 59 seconds
duration
Note: To program via PC a programming kit (data key included) will be required
To transfer programs between units a data key will be required
Approvals: VDE
Standards: IEC/EN 60730-1, EN 60730-2-7
Remotely Programmable
Manu. Part No. Supply Voltage
OM
AlphaRex D21/D22
6 VA
5 years
35 mm
Programmable without mains power
Bar graph display of daily profile
ON/OFF function
Lockable keypad
Automatic summer/winter change
Voltage free change-over contacts
2 channels
Stock no.
Price per
unit
Easy text-based programming direct on to time switch or program
via a PC using optional software and data key,Data keys can be used
to transfer programmes between units or used to securely store
back-up data
84 programs per channel possible: 28 weekly/astronomical, 28
yearly and 28 exceptional programs
Weekly programming for lighting, boilers and other simple on-off
circuits can be "weekly" or "inidividual day". Annual programming
integrates with Weekly, and offers "Every Year" repetition e.g.
Christmas, National Holidays or "Once" for periods which will
differ each year, for example vacation periods. Exceptional programming replace the Weekly and
Annual programmes for as long as it is active. These can be Every Year, One Year only, Weekly,
Single Day or Permanently ON/OFF.
Programmes are shown as a weekly matrix on the display
Manual override (ON/OFF/AUTO) for each channel on the front face
Twilight (astro) switching for lights and other electrical devices combined with standard time
switching functions
Automatically calculates sunrise/sunset (with optional offset +/-120 min)
One channel includes an input control enabling remote activation irrespective of the programme
setting (delay time 0min to 23hr 59min)
Option to create a cyclical repetitive programme on channel 1
Transparent cover seals with or without data key inserted
Note: To program via PC a programming kit will be required
Standards: EN 60730-1 and EN 60730-2-7
Supplied with: CD, DY64 data key
DY64 data key, 4 channel
USB Adaptor + PC Programming Kit
7 Day DPDT Timeswitch
Number Of Switching Operations
Supply Voltage
Contact Configuration
Contact Rating - Resistive Load
666-7876
Description
56/week
230 V ac
SPDT
16 A
Stock no.
Stock no.
Accessories
Programmable without mains power
Bargraph display of daily profile
ON/OFF function
Lockable keypad
Automatic summer/winter change
Voltage free changeover contacts
Single channel
Number Of Switching Operations
Supply Voltage
Contact Configuration
Contact Rating - Resistive Load
PC programming kit
AlphaRex DY64
Astro Program: Automated switching in relation to sunset and sunrise
Holiday function
Switching capacity 16A
Permanently ON or OFF with manual switch
Manual override
Unrestricted block programming of days
Fully automatic daylight saving time
Elapsed time and pulse counter
Security by PIN-Coding
Supply Voltage
Function
Number of Channels
Output Contacts
Description
OM
S$
S$
1+ 175·00
1+ 163·50
6+ 161·00
6+ 150·50
Description
Stock no. Price
per
D21/22 data key, 1/2 channel
USB Adaptor + PC Programming Kit
133-096
133-074
unit
unit
OM
S$
S$
1+ 51·50
1+ 225·00
6+ 48·40
6+ 210·00
S$
12+
47·40
S$
New products available online every week
1365
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Counters, Timers & Hour Meters
Programming Kit and USB Adaptor
Manu. Part
No.
Enables programmes to be written or read on a PC then
transferred using the data key (supplied) to a compatible LeGrand
time switch
Note: System requirements : 10Mb free disk space and Windows
2000/ ME/ XP/ 98 second edition
Supplied with: CD, USB programming adaptor, D21/22 Data Key
56
Manu. Part No.
Stock no.
047 73
Price per
133-074
unit
OM
Size (mm)
Supply Voltage
35
35.8
35.8
230 V ac
12 Vac/dc
115 V ac
Stock no.
Price per
S$
S$
1+ 225·00
6+ 210·00
453-928
a720-4394
a720-4397
unit
unit
unit
S$
Manu. Part No.
Stock no.
Price per
453-930
453-934
unit
unit
SPDT
S$
S$
1+ 150·00
1+ 168·00
1+ 168·00
6+ 141·00
12+ 138·00
S$
S$
1+ 37·40
1+ 177·50
6+ 35·10
6+ 167·00
S$
12+
34·40
Holiday function
Permanently ON or OFF with manual switch
Switching capacity 16A per channel
Manual override
Unrestricted block programming of days
Fully automatic daylight saving time
Elapsed time and pulse counter for each channel
Pulse function: Automated switch OFF timer up to 59:59 (mm:ss)
Security by PIN coding
PC programming package (stock no. 453-934) and Data-key (stock no. 453930) enable progam management and data back-up
Note: PC programming package and Data-key are not supplied and must be
ordered separately, see accessories
230 V ac
24hr/7day
2
2 x SPDT
Manu. Part No.
Battery Back-Up
Number Of Switching Operations
Size
Stock no.
SC 28.21 PRO
Price per
453-902
Function
Memory
Contact Configuration
Number of Channels
Price per
S$
398-8903
24hr/7day
97 Mb
2 x SPDT
2
OM
S$
1+
360·00
unit
6+
330·00
Contact Rating - Resistive Load 10 A @ 250 V ac Supply Voltage (Vac) 230
Power Consumption
2 VA
Function
1Year/7day/24hr
Battery Back-Up-Hrs
10 years
Memory
102 Mb
Manu. Part No. Contact Configuration Number of Channels Stock no.
SC 98.20 PRO
2 x SPDT
2
386-8483
SC98.40
3 x SPDT + 1 x SPST
4
386-8499
Number of
Channels
Stock no.
SC 98.20 PRO 2
SC98.40
4
Price per
386-8483
386-8499
unit
unit
OM
S$
S$
S$
1+
1+
430·00
670·00
unit
OM
Contact Rating - Resistive Load
Supply Voltage
Power Consumption
6 years
46 memory locations
35 mm
S$
S$
S$
S$
S$
1+ 185·00
6+ 172·00
S$
1+ 143·00
1+ 205·00
6+ 134·50
6+ 192·50
12+ 131·50
16A @ 250V Number Of Memory Locations
240 V ac
Battery Back-Up
6VA max.
Contact
Configuration
Manu. Part
No.
Stock no.
Price
per
SPDT
DPDT
TR 610 top 2
TR 612 top 2
133-349
133-333
unit
unit
OM
56
10 yr
Memory Card - Termina top 2
Description
Manu. Part
No.
Data Key
Programming
package
22262 DK PRO
PP 50 PRO
Stock no.
Price
per
453-930
453-934
unit
unit
OM
S$
S$
1+ 37·40
1+ 177·50
6+ 35·10
6+ 167·00
S$
12+
34·40
SC 28.x4 pro Series
Daily, weekly and Astro program
Permanent by date / holiday function
Manual permanent mode
Manual override
Automatic sorting of switching times on readout
Unrestricted block programming
Fully automatic daylight saving time
Elapsed time and pulse counter
Timer function
Advanced warning function
Channel button function
Security by PIN-Code
Data-key function
Note: PC programming package (stock no. 453-934) and Data-key (stock no. 453930) enable program management and data back-up, these are not supplied and must be purchased
separately
Daily/Weekly/Astro
230 V ac
100
Back up 6 years
1.5 VA
1 min
Height
Width
Depth
Contact Rating - Resistive Load
Number of Channels
Contact Configuration
90 mm
35.8 mm
63 mm
16 A @ 250 V ac
1
SPDT
Plug the memory card in to a Termina top 2 and the timeswitch
will use the program stored on the card. When the card is
removed, the program stored in the timeswitch will again be
executed.
The program on the memory card can be displayed on the
timeswitch without rewriting the program stored in the
timeswitch
The memory card can be stored under the hinged cover of
the timeswitch when not in use, and the cover can be sealed
This is ideal for transferring programs quickly between multiple timeswitches, or for one off
programs e.g. open days
Note: You will require a Termina top 2 timeswitch to use this product
Manu. Part No.
907 0 404
133-327
Price per
unit
OM
S$
1+
52·50
S$
6+
48·80
S$
12+
47·80
PC Programming Kit - Termina top 2
Note: You will require a Termina top 2 timeswitch to use this product
Supplied with: Memory card, plug-in adaptor, software
907 0 409
OM = Order Multiple a New product to range
Stock no.
This OBELISK programming kit offers everything you need to
program a Termina top 2 timeswitch on your PC,Clearly
structured, easy to understand. Even complicated programs can
be created in minutes by mouse click. The switch on phases are
clearly displayed in a chart and automatically recorded in a
table. So it is possible to save, print or export the programs to
Excel.,A program created on PC using this software can be
transferred via USB to the memory card, and from the card to
the timeswitch. So no PC or laptop is required on site
Manu. Part No.
1366
S$
1+ 238·00
Plain text programming of daily and weekly programs, service interval
monitoring and a countdown timer
Copy function speeds up programming
Date controlled holiday program
Zero cross switching for relay-saving switching and high lamp loads
PIN encoding to protect against program alteration
Extended operating temperature -30°C to +55°C
Volt-free contacts
Incandecent/Halogen lamp load 2600W; Fluorescent lamps 1000VA (parallel
compensated 730VA)
Note: Memory card or a PC programming kit are available separately
Accessories
Type
Supply Voltage
Memory Spaces
Battery Life
Power Consumption
Segment Length
S$
24 hour / 7 day Timeswitch Termina top 2
SC 28.21 pro
Supply Voltage
Function
Number of Channels
Output Contacts
S$
Daily, weekly or yearly programming
Can be programmed with supply disconnected
Permanent On/Off switch, manual override, holiday switching
Pulse function and segment length of 1 min (1 sec pulse)
71.5mm wide
S$
OM
unit
S$
Yearly - SC98
Manu. Part
No.
Data Key
Programming package
10 A @ 250 V ac
2 VA
230
10 years
Stock no.
SC 88.20 PRO
Accessories
Description
OM
Unrestricted block programming of days, channels and
switching functions
Can be programmed with supply disconnected
Permanent On/Off switch, manual override
Holiday switching of 1-99 days
Pulse function and segment length of 1 min (1 sec pulse)
71.5mm wide
Contact Rating - Resistive Load
Power Consumption
Supply Voltage (Vac)
Battery Back-Up-Hrs
Output Contacts
OM
a703-2495
Price
per
SC88
Holiday function
Permanently ON or OFF with manual switch
Switching capacity 16A
Manual override
Unrestricted block programming of days
Fully automatic daylight saving time
Elapsed time and pulse counter
Pulse function: Automated switch OFF timer up to 59:59 (mm:ss)
Security by PIN coding
PC programming package (stock no. 453-934) and Data-key (stock no. 453930) enable progam management and data back-up
Note: PC programming package and Data-key are not supplied and must be
ordered separately, see accessories
24hr/7day
1
Stock no.
SC 28.14 PRO 1
SC28.11 pro
Function
Number of Channels
Number of
Channels
Stock no.
133-264
Price per
unit
OM
S$
S$
S$
1+ 163·00
6+ 151·50
12+ 148·50
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
24 Hour or 7 Day Single Channel
Quartz control, simple time setting by rotating dial in either
direction
Supply voltage of 230V(ac)
Voltage free changeover
Surface/Flush/DIN rail mount
67 x 67mm panel cut out
200 hours battery back-up (264-9922, 264-9966)
Conforms to EEC24
Analogue
24 Hour or 7 Day
24 hour (FM/1 QRWUZH) or 7 day (FM/1 QRTUZH) versions
Quartz driven with a battery back up (72 hour charge time)
Volt-free change-over contact
Manual switch
Incandescent lamp load 135W, fluorescent lamp load 100W
Supply voltage of 230Vac
Control panel cut-out ∅62.5mm
Note: Counter does not come with a back or a cover
Height
62 mmContact Rating - Resistive Load
Width
60 mmTime Switch Type
Depth
32 mmResolution
Contact Configuration SPDT Number Of Switching Operations
Manu. Part No.
Stock no.
FM/1 QRTUZH
513-4704
Height
Width
Depth
OM
unit
S$
S$
1+ 103·00
6+
96·00
S$
12+
94·00
24 Hour or 7 Day - Tactic Series
1 channel time switch without battery reserve
Panel mount
Volt-free SPDT contacts
ON, timed and OFF manual override
Supply voltage of 230Vac
Incandescent lamp load 1300W
Height
Width
Depth
Contact Rating - Resistive Load
Stock no.
01.79.0001.1
Price per
512-9594
unit
OM
S$
1+
54·50
24hr
15 m (min ON period 30 m)
96
S$
6+
50·50
Price per
unit
OM
S$
1+
80·00
Height
Depth
24 hr
7 day
Number Of Switching
Operations
144/day
168/week
Stock no.
422-5584
422-5590
S$
6+
74·50
S$
12+
73·00
Q554 FORM 2
Price per
SPDT
20 A
Stock no.
264-9792
unit
unit
Price per
unit
Height
Width
Depth
92.5 mm
70 mm
73 mm
S$
264-9922
264-9966
264-9938
264-9972
unit
unit
unit
unit
1+
1+
1+
1+
95·50
97·50
79·00
79·00
S$
6+
6+
6+
6+
S$
90·00
91·50
74·50
74·50
12+
12+
12+
12+
88·00
89·50
72·50
72·50
Starkstrom
Contact Rating - Resistive Load
Contact Configuration
16 A
SPDT
Supply Number Of Switching Battery BackVoltage
Operations
Up-Hrs
230 V ac
144-168/week
100
230 V ac
144/week
–
24 Vac/dc
144/week
100
Stock no.
Price per
180-7874
180-7773
180-7795
unit
unit
unit
Stock no.
180-7874
180-7773
180-7795
OM
S$
S$
S$
1+
1+
1+
255·00
133·00
205·00
6+ 235·00
6+ 122·50
6+ 188·50
12+ 230·00
12+ 119·50
12+ 184·50
Programmable via membrane keyboard, with audible entry
verification
Security protection of programmes
LED Display
Adjustable 1-15s pulse length
Ideal as school bell or factory hooter timer
Surface Mount
Manu. Part No.
841
422-5584
422-5590
OM
S$
S$
S$
1+ 143·50
1+ 155·00
6+ 133·50
6+ 144·00
12+ 130·50
12+ 141·00
112 mm
50 mm
226 mm
SPST
Stock no.
329-250
Supply Voltage
Contact Rating - Resistive Load
Battery Back-Up-Hrs
Number of Channels
Price per
unit
OM
S$
1+
540·00
230 V ac
15 A
90 d
1
S$
S$
S$
S$
24 Hour / 7 Day CMOS Time
Switch, IMD 120
Easy programming (menu or text programming)
Single Channel
Weekly programme
1 minute resolution
Display of switching function
Flush mounting
Supply Voltage
3.4 V dc Battery Back-Up
3 yrs
Function
24hr/7day Number Of Switching Operations20 memory locations
Number of Channels1
Size
H41.6 x W32.4 x D14.9 mm
Output Contacts CMOS
136 mm
Contact Configuration
82 mm
Contact Rating - Resistive Load
105.7 mm
Battery Back-Up-Hrs
200 → 250 V ac
Stock no.
OM
Supplied with: transparent cover, panel mounting clip, and plug in
surface mounting base with screw terminals and terminal cover
Panel/Surface mount
66.4 x 66.4mm panel cut out
Height
Depth
Width
Contact Configuration
Day omit facility
Single channel
Quartz controlled manual override facility
Dial calibration in 15 minute divisions
Surface mount
Note: Stock number 264-9809 has a volt free contact
Approvals: BEAB
Manu. Part No.
Price
per
7 Day Pulsed Output
24 hour Quartz Controlled
Height
Depth
Width
Supply Voltage
16021
16721
16022
16722
Stock no.
Stock no.
264-9922
264-9966
264-9938
264-9972
Digital
72 mm
34.5 mm
Supply voltage of 230Vac
IP53
Hinged door with viewing window (padlockable - not supplied)
Surface mount
Time Switch Type
24 hr
7 day
24 hr
7 day
MAXI REX CQWT 230V
MAXI REX CT 230V 50HZ
924448
24 hour or 7 Day Indoor/Outdoor
Contact Configuration
Contact Rating - Resistive Load
Time Switch
Resolution
Type
24 hr
10 m
7 day
1 hr
Manu. Part
No.
Manu. Part No.
16 A
84
72 mm
336-536
Time Switch
Type
Time Switch
Resolution
Type
24hr/7 day
15 m (min ON period 45 m)
24 hr
15 m (min ON period 45 m)
24 hr
10 min (min ON period 20 m)
Contact Rating - Resistive Load
Number Of Switching Operations
Width
Tactic 171.1
Resolution
Number Of Switching Operations
10 m
72/week
1 hr
84/week
10 m
72/week
1hr/10m (min ON period 2 hr/20m)
84/week
49·60
Control panel cut-out 68x68 mm
AC switching capacity 16A 250Vac
Minimum switching current 100 ma (20Vac/dc)
Supply Voltage 240 Vac
Accuracy ±2.5 sec. day
Minimum switching time 2hrs
Manual override fix on/timed/fix off
Ambient temperature -20 to +85°C
Surface and panel mounting
Weight 160 grams
Supplied with: Backplate and terminal cover
Stock no.
56
S$
12+
7 Day - Tactic 171.1
Manu. Part No.
16 A
SPDT
24 Hour & 7 Day
72 mm Time Switch Type
72 mm Resolution
34.5 mm Number Of Switching Operations
16 A
Manu. Part No.
Contact Rating - Resistive Load
Contact Configuration
Time Switch Type
24 hr
7 day
24 hr
7 day
16 A
24hr
15 m (min ON period 30 m)
96
Price per
72 mm
72 mm
56 mm
Manu. Part No.
SPST
20A at 240 V ac
100 h
03.85.0001.1
Stock no.
388-404
Price per
unit
OM
S$
1+
66·50
6+
62·50
12+
61·00
7 Day 1/2 Channel Digital
OM
S$
1+
285·00
S$
6+
265·00
S$
Programmable via membrane keyboard, with audible
entry verification
Manual selection of any output for a preset period of 1,2,3
or 4 hours
Manual override facility
LED Display
Surface Mount
Many more leading brands from over 2,500 suppliers available online
1367
www.nguyenxuong.com
ON-LINE
www.rssingapore.com
Counters, Timers & Hour Meters
Height
Depth
Width
Supply Voltage
Battery Back-Up-Hrs
112 mm
50 mm
226 mm
220 → 240 V ac
90 d
Manu. Part No.
Stock no.
852 RS
Number Of Switching Operations
Contact Configuration
Contact Rating - Resistive Load
Number of Channels
Price per
317-982
unit
OM
S$
1+
390·00
200/week
2 x SPDT
10 A
2
S$
6+
S$
365·00
Time Switch Module 56 Digital
FMD 120
230 V ac
24hr/7 day
1
SPDT
Manu. Part No.
FMD 120
388-391
Price per
OM
S$
1+
98·50
unit
3 yrs
20 memory locations
Dia 64 mm
H62 x W60 x D32 mm
S$
6+
91·50
S$
12+
89·50
388-432
Price per
Price
per
674-1814
674-1817
unit
unit
OM
S$
S$
1+ 205·00
1+ 245·00
6+ 193·00
6+ 225·00
S$
82 mm
75 mm
105 mm
Contact Rating - Resistive Load
Battery Back-Up-Hrs
Supply Voltage
6A
36 h
240 V ac
Manu. Part No.
Stock no.
ZDR101F011
ZDR102F021
Price per
182-2615
182-2637
unit
unit
OM
S$
1+
1+
420·00
475·00
S$
6+
6+
S$
395·00
445·00
7 Day Digital – ELU5620
Quartz controlled, can be used with up to 3000W of fluorescent (or low
energy) lighting, or 3000W of filament lighting
SPNO contact configuration
Surface mounting
1000 hours battery back-up
Height
Depth
Width
Supply Voltage
Supply Voltage
230 V ac Battery Back-Up
3 yrs
Function
24 hr/7 day Number Of Switching Operations20 memory locations
Number of Channels1
Panel Cut Out
66 x 66 mm
Output Contacts SPDT
Size
DIN 72 x 72
Stock no.
1
2
Stock no.
Manu. Part No. Contact Configuration Number Of Switching Operations Number of Channels Stock no.
ZDR101F011
SPDT
399/week
1
182-2615
ZDR102F021
2 x SPDT
406/week
2
182-2637
Weekly and daily programme
Easy programming
20 memory spaces
Manual switch-over to daylight saving time
Switching current: 16A @ 250Vac, 10A @ 24Vdc
Surface and panel mounting
Dimensions: H72 x W72 x D35mm
TACTIC 371.1 PLUS
SC44.11 pro
SC44.21 pro
Height
Depth
Width
24 Hour / 7 Day, 20 Programs Tactic 371.1 plus
Manu. Part No.
Number of
Channels
Automatic summer/winter changeover
Programme can be suspended for 10 days
Access code prevents unauthorised changes
2 second pulse facility
LCD Display
Surface; Din Rail; Panel Mount
Optional plug-in memory not included
Battery Back-Up
Number Of Switching Operations
Panel Cut Out
Size
Stock no.
Manu. Part
No.
Contact Configuration Stock no.
SPCO
674-1814
SPCO x 2
674-1817
230 V ac
250 Vac 16 A
30
1 minute
7 Day 1/2 Channel Digital –
ZDR100
Easy programming (menu or text programming)
Weekly and daily programme
20 memory spaces
Relay output
Relay switching current: 16A @ 250Vac, 10A @ 24Vdc
Manual switch-over to daylight saving time
Flush mount
Dimensions: H60 x W60 x D32mm
Supply Voltage
Function
Number of Channels
Output Contacts
Supply Voltage
Contact Rating - Resistive Load
Memory Spaces
Segment Length
OM
unit
S$
S$
1+ 146·00
6+ 136·00
S$
104 mm
69 mm
72 mm
220 → 240 V ac
Manu.
Part No.
Stock no.
Price
per
ELU56-20
309-6240
unit
Contact Rating - Resistive Load
Number Of Switching Operations
Time Switch Type
Number of Channels
OM
S$
S$
1+ 195·00
6+ 183·50
20 A
112/week
7 day
1
S$
Modular 24 Hour
24 Hour / 7 Day 1 Channel
Timeswitch - SC 24.10 pro
The unit can be purchased assembled ready for panel
mounting, without the powerboard for assembly into
equipment or in kit form (housing plus powerboard)
These timers can be mounted on a flat surface such as a
chassis plate or the rear surface of an enclosure. They cannot
be directly mounted onto a wall or unenclosed surface.
67 x 67mm panel cut out
CE marked in accordance with 73/23/EEC (LVD) and 89/336/
EEC (EMC) Directives
The SC 24.10 pro from Hugo Muller
incorporates a text based user interface which
includes a self explanatory menus/symbols,
consequently making the device easy to use/program. Both daily
and weekly programs are possible when using this device with a
minimum interval time to switch of 1 minute. Additional features
Hugo Muller have included comprise of a 6 year power reserve
(enabling the device to be programmed when disconnected), an
unlimited program security via E2 - PROM and the ability to display
two lines of text via the user interface.
Single channel timeswitch
Daily and weekly programs possible
46 individual memory locations
Minimum interval to switch is 1 minute
Switching capacity of up to 8A
Permanent by date / holiday function capability
Manual permanent mode (channel key)
Manual override
Automatic sorting of switching times
Unrestricted block programming
Fully automatic daylight saving time
Elapsed time and pulse counter
Pulse function
External input (manual override)
Security by PIN code
Product Index
Type
Supply Voltage
Digital
Timeswitch
230 Vac (50⁄60 Hz)
Stock no.
a735-0181
Price per
Height
Depth
Width
Contact Configuration
Manu. Part No.
EL11
unit
1
46
S$
S$
1+ 177·00
6+ 166·00
7 Day 1 and 2 Channel Digital
- SC44 pro
Text based menu and programming
LCD-Backlight
Elapsed time and pulse counter
Plug for DataKey DKpro (programmable via PC interface)
Security by PIN-Code
Permanent by date / holiday function
Unrestricted block programming
Manual permanent mode
Manual override
Automatic sorting of switching times on readout
Automatic daylight saving time
Can be programmed with supply disconnected (6 years battery reserve)
1368
Stock no.
226-1257
220 → 240 V ac
16 A
1000 h
Supply Voltage
Contact Rating - Resistive Load
Battery Back-Up-Hrs
Price per
unit
OM
S$
1+
96·00
S$
6+
90·50
S$
12+
88·50
Modular 7 Day
Number of Channels
Memory Spaces
OM
72 mm
34 mm
72 mm
SPDT
OM = Order Multiple a New product to range
S$
The unit can be purchased assembled ready for panel
mounting, without the powerboard for assembly into
equipment or in kit form (housing plus powerboard)
These timers can be mounted on a flat surface such as a
chassis plate or the rear surface of an enclosure. They
cannot be directly mounted onto a wall or enclosure surface.
67 x 67mm panel cut out
CE marked in accordance with 73/23/EEC (LVD) and 89/336/
EEC (EMC) Directives
Height
Depth
Width
Contact Configuration
Supply Voltage
Contact Rating - Resistive Load
Battery Back-Up-Hrs
Manu. Part No.
EL17
72 mm
34 mm
72 mm
SPDT
220 → 240 V ac
16 A
1000 h
Stock no.
226-4054
Price per
unit
OM
S$
S$
S$
1+ 118·00
6+ 111·00
12+ 108·50
www.nguyenxuong.com
ORDERLINE
65 6865 3433
Counters, Timers & Hour Meters
24 hour or 7 Day Immersion Heater
ETU
Analogue
Integral thermal fuse for extra protection
Stock no. 309-5613 has optional one or two hour boost function
SPST contact configuration
Surface mounting type
1000 hours battery back-up
Height
Depth
Width
Supply Voltage
115 mm
50 mm
74 mm
220 → 240 V ac
Contact Rating - Resistive Load
Number of Channels
Number Of Switching Operations
Time Switch
Type
Manu. Part
No.
Stock no.
Price
per
OM
S$
24 hr
7 day
ETU2000
ETU8000
309-5613
309-5607
unit
unit
1+
1+
76·00
93·00
Tappet - TS8 Series
13 A
1
42/week
S$
6+
6+
71·50
87·50
S$
12+
12+
70·00
85·50
Ideal for use in controlling heating and ventilation appliances,
combination boilers, washing machines, dish washers or lighting
Indicator shows when timed output is On
SPDT contact configuration
Surface mounting type
1000 hours battery back-up
Time Switch Type
Stock no.
24 hr
7 day
225-6110
225-6126
unit
unit
OM
Stock no.
105-489
Price per
unit
S$
S$
1+ 115·00
1+ 125·00
6+ 108·00
6+ 117·50
12+ 106·00
12+ 115·00
S$
1+
39·30
MEU17
105-518
Price per
unit
OM
S$
1+
41·00
S$
6+
36·50
S$
12+
35·70
271-338
unit
S$
1+
40·70
S$
6+
37·50
S$
12+
36·70
6+
230-4124
Supply Voltage
Price per
unit
OM
S$
1+
74·00
240 V ac
S$
5+
69·00
S$
10+
67·50
Plug-in 24-Hour Time Switch
38·60
Price per
unit
OM
S$
1+
34·40
S$
5+
32·00
6+
6+
52·00
58·00
S$
10+
31·30
12+
12+
51·00
57·00
S$
12+
37·70
24 hour or 7 Day Digital - ETU Series
Suitable for domestic appliances such as washing machines and
dishwashers, due to high inductive rating
Supply Voltage of 230V(ac).
Battery back up allows out of socket programming of up to 1000 hrs
Electronic timer technology
CE marked in accordance with 73/23/EEC (LVD) and 89/336/EEC (EMC)
Directives
Contact Rating - Resistive Load
Depth
Height
Width
Number of Channels
Price per
Stock no.
780-627
S$
Max time: 99h 59m 59s
Inputs for start and stop
Start/Stop button
Optical and acoustic signal on completion of time
Screw clamp connection
Stock no.
Digital
Daily/Weekly
Daily/Weekly
Stock no.
100 Hour Count-Down
LCD
SPDT
230 V ac
16 h
1s
1 sec
OM
Motor driven 24-hour time switch for plugging directly into a
3 pin 10A 240V Australian or New Zealand socket allowing a
10A 3-pin appliance to be connected to its outlet socket.
Time setting is achieved by removable tappets mounted on
the time switch fascia plate. A manual override switch is
provided. Manufactured to Australian standards. Approval
No. N/10872.
Run Back
Display Type
Contact Configuration
Supply Voltage
Battery Back-Up-Hrs
Segment Length
Resolution
24 hr
15m (30m min.
period)
A plug-in timer rated at 240Vac 10A that can be programmed with up to 12
operations in a 24 hour or 7 day period.
Daily 24 hour programming for all 7 days of the week
Simple to set with digital accuracy - switching times can be set at 1 minute
increments
In-built rechargeable battery maintains programs when unplugged from
mains
Daylight saving function to advance time by 1 hour
Override switch bypasses timer action
Random ON and OFF switching for added security with unoccupied
premises
Rating 240 volt 10 amp
Type
7 Day Electronic Timer Module - MEU17
Stock no.
unit
Product Index
Type
For OEM applications in equipment and appliances requiring
accurate, cost effective time control. The module requires only an
external diode, resistor and relay to switch mains.
Individual day, weekday or weekend programme selections over a
7 day period
Six programmes available - if selected to operate over all 7 days, 42
ON/OFF switchings per week will result
Self-cancelling override until next programme change
1 minute minimum switching time
1000 hrs rechargeable memory back-up
Dimensions: H40mm, W54.5mm, D37.5mm
Manu. Part No.
Price per
13A @ 240 V
ac
6/day
24 Hour or 7 Day Programmable
S$
OM
Contact Rating - Resistive
Load
73 mm
Number Of Switching
Operations
44 mm
Time Switch Type
5 A @ 230 Vac Resolution
56
Digital
24 Hour Electronic Timer Module - MEU11
MEU11
Width
329-676
For OEM applications in equipment and appliances requiring
accurate, cost effective time control. The module requires only an
external diode, resistor and relay to switch mains.
Up to 4 ON/OFF programmes per day
Self-cancelling override until next programme change
1000 hrs rechargeable memory back-up
1 minute minimum switching time
Dimensions: H40mm, W54.5mm, D37.5mm
Manu. Part No.
73 mm
Stock no.
220 → 240 V ac
13 A
1
Time Switch
Stock no.
Type
24 hr
225-6110
7 day
225-6126
Price per
Height
Depth
Contact Rating - Inductive
Load
24 hour 7 day Single Gang FST
Height 85 mm Supply Voltage
Depth 38 mm Contact Rating - Resistive Load
Width 85 mm Number of Channels
Manu. Part
Number Of Switching
No.
Operations
FST 11
8/day
FST 17
42/week
Motor driven for use in standard BS 1363 13A mains sockets
Supply Voltage of 230V(ac)
30 minute minimum switching interval which can be increased in 15
min steps
Manual override facility
6 tappet pins supplied
CE marked in accordance with 73/23/EEC (LVD) and 89/336/EEC (EMC)
Directives
OM
Height 81 mm Contact Rating - Inductive Load
6 A @ 230 Vac
Width 61 mm Contact Rating - Resistive Load
13A @ 230 V ac
Depth 40 mm Resolution hours
1m
Number Of Switching Operations
Time Switch Type
Stock no.
8/day
24 hr
210-5674
84/week
7 day
210-5680
8A
41 mm
48 mm
48 mm
1
Time Switch Type
S$
S$
S$
1+ 136·50
6+ 127·00
12+ 124·00
24 hr
7 day
Stock no.
210-5674
210-5680
Price per
unit
unit
OM
S$
1+
1+
56·00
62·50
Visit our website for additional price information and exciting promotions
S$
S$
1369
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement