Russell Hobbs | RHWM81400DIDW | Instruction manual | Russell Hobbs RHWM81400DIDW Instruction manual

White 8KG 1400 Spin Speed Inverter
Direct Drive Washing Machine
Instruction Manual
Model number: RHWM81400DIDW
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
Contents
Safety Instructions
……………………………………………………………………
3-4
Before using the appliance
……………………………………………………………………
5
Installation
……………………………………………………………………
6 - 10
How to use
……………………………………………………………………
11 - 12
Control panel functions
……………………………………………………………………
13
Washing procedure &
programme selection
……………………………………………………………………
14 - 23
Maintenance
……………………………………………………………………
24 - 26
Removing stains
……………………………………………………………………
27
Trouble shooting
……………………………………………………………………
28
Specification
……………………………………………………………………
29
Connections to mains supply
……………………………………………………………………
30
Spare parts
……………………………………………………………………
31
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
Safety Instructions
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Do not use an extension lead for this appliance. Only plug directly into a wall socket.
Do not plug into damaged plug sockets
In case the power cable becomes damaged, contact 0845 208 8750 for advice.
Never pull the cable when unplugging – always grip the plug itself.
Do not plug-in or pull-out the plug from the receptacle with wet hands to prevent
electric shock.
Never touch the machine with wet hands or feet.
Never open the detergent drawer when the appliance is running.
Never force the door to open when the washing machine is running.
Do not touch drainage hose and water during drainage as the appliance may reach high
temperatures when running.
In case of any breakdown, unplug the appliance first and then turn the tap off. Do not
attempt to repair by yourself, always contact 0845 208 8750 for advice.
Remember that packaging materials of your machine may be dangerous for children.
Keep the packaging materials in a place where children cannot reach or dispose of them
appropriately.
Do not allow your children to play with the washing machine as it is an electricallydriven appliance.
Keep your pets away from your machine.
Your machine should only be used by adults in line with the information provided in this
user’s manual.
Your machine is designed to be used domestically. Commercial use will cause your
warranty to be cancelled.
Anyone’s intervention to your machine except for a qualified engineer, in anyway will
cause your warranty to be invalid.
Ideal operating temperature of your machine is 15-25˚C.
Do not place your machine on carpet as this will block ventilation of the base.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
3
Safety Instructions
• Do not keep inflammable liquids near your machine.
• You should remove the transport bolts of your machine before the first usage. Faults
occurring in machines operated with transport bolts fitted are not covered by the
warranty Do not put the drainage hose of your machine in a bucket or sink.
• Your machine is not covered under warranty for faults caused by any kind of external
factors (pesticides, fire, etc.).
• The appliance is not intended for use by people (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they do
not play with the appliance
Recommendations
• Ensure you run the machine empty on a full cycle at 95°C with detergent before using
the machine properly for the first time.
• Put detergent into the drawer at the beginning of each wash.
• It is recommended that you wash only extremely dirty laundry in prewashing
programme.
• The amount of laundry you put in your washing machine should not exceed 8kg.
• If your machine is not going to be used for a long time you should unplug the appliance,
turn off the water inlet and leave the door slightly open. This is so that the inside of your
machine will remain dry and will not cause an unpleasant smell of damp.
Important note:
Please read this booklet before installing and switching on this appliance. The
manufacturer assumes no responsibility for incorrect installation and usage as described in
this booklet.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
4
Before using the appliance
• Transportation screws which are located at the back of the machine, must be removed
before using or running the machine. You will void the manufacturer’s guarantee if
these are not removed before using or running the machine
• Before installation, check that all parts listed below are present. If any parts are
missing, please contact the product care service team on 0845 208 8750.
Note
The drawings in the book may vary from your washer model. They are designed to show
the different features of all models covered by this book. Your model may not include all
features.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
5
Installation
1. Before operating the washing machine, remove the 3 transportation screws and rubber
spacers. If the screws are not removed, it may cause heavy vibration, noise and product
malfunction, (voiding the guarantee).
2. Unscrew the 3 screws with a 10mm hex wrench, spanner or cross-tip screwdriver. Keep
the 3 screws as they will need to be re-used if the machine has to be transported.
3. Close the holes with the cap holders supplied
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
6
Installation
4. Adjust the level of washing machine by the adjustable feet. Please check if there is a gap
between the four adjustable feet and the floor. If there is then adjust the level of the
washing machine by turning the adjustable feet. Make sure that the machine does not
sway and that it is completely level. After the adjustment is finished, turn the fixing nuts
up tightly, so that the adjustment that has been made is fixed.
NOTE
There should be no swaying of machine and all the adjustable feet should sit/touch the
floor.
Location of the Washing Machine
• Check location where the washer will be installed. Make sure you have everything
necessary for correct installation.
• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.
• Do not place or store laundry products on top of washer at any times.
• Install the washer on the horizontal solid floor. If the washer is installed on an unsuitable
floor, it could make considerable noise, vibrate severely and cause a malfunction. If the
washer is not level, adjust leg up or down for horizontal installation.
• Ventilation openings must not be obstructed by carpeting when the washer is installed
on a carpeted floor.
• Leave some space (right & left : 2cm, rear : 10cm).
• In case of built-in installation, the distance between top of the washer and bottom of
upper plate should be at least 3mm.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
7
Installation
Electrical connection
• Your washing machine is set to 220-240V and 50Hz.
• The mains cord of your washing machine is equipped with a specific earthed plug. This
plug should always be inserted to a earthed socket of 13 amps. The current value of the
fuse should be 10 amps.
• We do not take responsibility for any damage that occurs due to non earthed usage.
• Operating your machine under low voltage will cause the life cycle of your machine to
be reduced and its performance to be restricted.
Water
The washer should be connected to the water mains using new hose sets. Old hose sets
should not be reused. In using only one water tap or in case of only one water inlet valve,
connect the inlet hose to the cold water inlet valve.
Water inlet hose connection
• Be careful not to confuse hot water inlet and cold water inlet.
• Your machine has a single water (cold) inlet.
• To prevent leakages on the connection joints, 1 seal is included in the hose packing, (Fit
this seal on the end of the water inlet hose at the tap side.)
• After all connections are completed, check for leakages around the connection joints by
turning on your tap completely and seeing if any water escapes.
• Be sure that the water inlet hoses are not folded, twisted, crushed or elongated by
stretching.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
8
Installation
Ordinary tap
Screw-shaped tap
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
9
Installation
Water drainage
• Never forget to install drain hose before operating your washer.
• The water drain hose should be mounted at a height of minimum 60 cm, maximum 100
cm from the ground.
• The end of the water drain hose can be fitted directly to the drainage hole on the back
side of the washer.
• When installing the drain hose pipe, secure it tightly with a string.
• Never attempt to extend the water drain hose by adding extra parts.
• If the drain hose is too long, do not force it back into the washer. This will cause
abnormal noise and damage to the product.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
10
How to use
To obtain the best washing results, you must operate your washer properly. This section
gives you this important information.
Preparing clothes for washing
• Close zippers, snaps, and hooks to avoid snagging other items.
• Remove pin, buckles, and other hard objects to avoid scratching the washer interior.
• Empty pockets and pull them inside out.
• Turn down cuffs and turn synthetic knits inside out to avoid pilling.
• Tie strings and sashes to avoid tangling.
• Treat spots and stains. (See ‘Removing stains’ on page xx)
Sorting clothes for washing
• Separate heavily soiled items from lightly soiled ones, even if they would normally be
washed together.
• Separate dark colours from light colours, colourfast items from non-colourfast item
• Wash lint producers and lint collectors separately.
Loading clothes for washing
• Drop items into washer loosely. Items should move easily through wash water for best
cleaning and wrinkle-free results.
• Load washer properly and select correct load size setting.
• Overloading and selecting a setting too small for the wash load can :
• Cause poor cleaning
• Increase wrinkling
• Create excessive lint
• Wear out items faster (because of pilling)
Mix large and small items in each load. Load evenly to maintain washer balance. An
unbalanced load can make the washer vibrate during spin.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
11
How to use
• Reduce wash time when using a small load size setting. A load with only a few small
items needs less wash time.
• Use a large load size setting to reduce wrinkling with permanent press clothes and some
synthetic knits. These items should have more room to move in the water than heavy
items. (towels, jeans).
Adding detergent
• Please use only the powder detergent for the front loader washing machine.
• Please use the proper amount of detergent in conformity with the instruction of the
detergent manufacturer.
• Using a large amount of detergent, more than the recommended amount, can cause
lots of soapsuds and will overload to the motor. In addition, this will deteriorate the
washing and rinse performance.
Adding fabric softener
• If desired, add measured liquid fabric softener to the softener inlet.
• Pour liquid fabric softener into the dispenser using the amount recommended on the
package.
• Do not exceed the maximum fill line.
• Overfilling can cause early dispensing of the fabric softener which could stain clothes.
• Do not open the detergent case when water is supplied.
• Avoid pouring fabric softener directly on the clothes.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
12
Control panel functions
13
Washing procedure & programme selection
1. Cotton is automatically selected upon power on
• Press the Power button to start.
• Press the Start/Pause button.
• Initial condition;
• Programme : Cotton
• Wash : main wash
• Rinse : 3 times
• Spin : 800 rpm
• Water temperature : 40°C
2. Manual selecting
• Press the Power button to start.
• Select the conditions which you want to use by turning the program dial and pressing
each button.
• Press the Start/Pause button.
3. Time delay washing (time delay can be made from 2 hours to 12 hours)
• Press the Time delay button until the display shows 8 hours.
• Press the Start/Pause button.
•
•
•
•
Each pressing of the Time delay button advances time delay by one hour.
Stop pressing the Time delay button once the correct time is displayed.
If you want to check the selected program, press the ‘Start/Pause’ button again.
Preparing washing before starting ‘Time Delay’ ;
• Turn on the water tap
• Load laundry and close the door
• Place the detergent and fabric softener in the detergent case.
• To cancel the Time delay, press the Power button.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
14
Washing procedure & programme selection
4. FUNCTION
• Recommended programs according to the laundry type
• Pre Wash : If the laundry is heavily soiled, “Pre Wash” program is recommended. Pre
Wash is available in Cotton and Synthetic programs.
• Rinse+ : Used to introduce an additional rinse, which may assist in removing traces of
detergent residue.
• Eco: By selecting Eco function, the water temperature is lowered and washing time is
increased. So you can economize your consumption of heating energy.
• Quick : “THE QUICK CYCLE” option has a very short cycle time. Recommended uses
include a small amount of the laundry, a relatively clean load of laundry, or frequently
used clothes.
15
Washing procedure & programme selection
Cotton program
Note
• If you want to change the setting during operation, press the Start/Pause button to hold
the operation and press the button you want.
• ‘Cold’, ‘30’ °C, ‘40’ °C, ‘60’ °C and ‘95’ °C washing temperatures are selectable with the
Cotton program.
• ‘Prewash’, ‘Rinse+’, and ‘Crease Care’ wash options are selectable with the Cotton
program.
Caution
• If you select washing temperature ‘95’ °C, some cold water is supplied before the drain
of main wash. This is to protect the user from the hazard of burn injury by lowering the
temperature of hot wash water instead of directly draining it. Therefore this is not a
malfunction.
• Be careful with the draining water, since it can be still hot although the temperature is
lowered.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
16
Washing procedure & programme selection
Eco program
Note
• If you want to change the setting during operation, press the Start/Pause button to hold
the operation and press the button you want.
• Only ‘60’ °C washing temperature is selectable with the Eco program.
• ‘Rinse+’ and ‘Crease Care’ are the only wash options that are selectable with the Eco
program.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
17
Washing procedure & programme selection
Synthetic program
Note
• If you want to change the setting during operation, press the Start/Pause button to hold
the operation and press the button you want.
• Only ‘Cold’, ‘30’°C, ‘40’°C and ‘60’ °C washing temperatures are selectable with the
Synthetic program.
• A spin speed of more than 1200rpm is not selectable with the Synthetic program in
order to protect damage to the laundry.
• ‘Prewash’, ‘Rinse+’, and ‘Crease Care’ wash options are selectable with the Synthetic
program.
• The appropriate amount of laundry for the Synthetic program is below 2.0kg.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
18
Washing procedure & programme selection
Delicate program
Note
• If you want to change the setting during operation, press the Start/Pause button to hold
the operation and press the button you want.
• 'Cold', '30°C' and '40°C' are the only washing temperatures that are selectable with the
Delicate program.
• A spin speed of more than 1000rpm is not selectable with the Delicate program.
• Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with the Delicate program.
• The appropriate amount of laundry for the Delicate program is below 2.0kg.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
19
Washing procedure & programme selection
Wool program
Note
• If you want to change the setting during operation, press the Start/Pause button to hold
the operation and press the button you want.
• Only 'Cold', '30°C', and '40°C' washing temperatures are selectable with Wool program.
• A spin speed of more than 1000rpm is not selectable with the Wool program in order to
protect damage on laundry.
• Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with the Wool program.
• The appropriate amount of laundry for the Wool program is below 2.0kg.
• It is recommended that you use special detergent for wool (Please note that special
neutral detergent for wool creates a lot of bubbles, so use the appropriate amount).
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
20
Washing procedure & programme selection
Hand wash program
Note
• If you want to change the setting during operation, press the Start/Pause button to hold
the operation and press the button you want.
• Only ‘Cold’ and ‘30’ °C washing temperatures are selectable with the Hand Wash
program.
• A spin speed of more than 1000rpm is not selectable with the Hand Wash program.
• Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with Hand Wash program.
• Use the Hand Wash program for laundry that is marked ‘Hand wash’ on the care label.
• The appropriate amount of laundry for the Hand Wash Program is below 2.0kg.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
21
Washing procedure & programme selection
Quick 30 program
Note
• If you want to change the setting during operation, press the Start/Pause button to hold
the operation and press the button you want.
• Only ‘Cold’, ‘30’ °C and ‘40’ °C washing temperatures are selectable with the Quick 30
program.
• Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with the Quick 30 program.
• The appropriate amount of laundry for the Quick 30 Program is below 2.0kg..
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
22
Washing procedure & programme selection
Spin only program
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
23
Maintenance
The correct care of your washer can extend its life. This section explains how to care for
your washer properly and safely.
Cleaning your Washing Machine
Exterior
• Wipe up detergent, bleach, and other spills with a soft, damp cloth or sponge as and
when they occur.
• Occasionally wipe the outside of the washer to keep it looking like new.
Interior
• Clean interior with 250ml of chlorine bleach mixed with 500ml of detergent. Run washer
through a complete cycle. Repeat this process if necessary.
Important note
• Do not put sharp or metal object in your washer, or they can damage the finish. Check
all pockets for pins, clips, money, bolts, nuts, etc.
• Do not lay these objects in your washer after emptying pockets.
Winter storage or moving care
Install and store your washer where it will not freeze. Because some water may stay in the
hoses, freezing can damage your washer. If you store or move your washer during freezing
weather, winterize it.
To winterize washer
• Turn off water faucet.
• Disconnect and drain water inlet hoses.
• Run washer on a drain and spin setting (see page 10) for 1 minute.
• Unplug the power supply cord.
To use washer again
• Flush water pipes and hoses.
• Reconnect water inlet hoses.
• Turn on water faucet.
• Reconnect power supply cord.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
24
Maintenance
Non-use or vacation care
Operate your washer only when you are at home.
If you are on vacation or don’t use your washer for an extended period of time, you should:
• Unplug the power supply cord or turn off electrical power to the washer.
• Turn off the water supplier to the washer.
This helps avoid accidental flooding (due to a water pressure surge) while you are away.
Cleaning the water inlet filter
• Clean the filter when water leaks from the water inlet.
Cleaning the drain filter
• This drain filter is used to screen foreign objects such as threads, coins, pins, buttons etc.
• If the drain filter is not cleaned regularly (after every 10 times of use), a drain problem
could be caused.
CAUTION
Be careful when draining if the water is hot.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
25
Maintenance
Cleaning the detergent case
• After a while detergent and fabric softeners leave a deposit in the case;
• It should be cleaned from time to time with a jet of running water. If necessary it can be
removed completely from the machine by pressing the catch downwards
• and by pulling it out.
• To facilitate cleaning, the upper part of the fabric softener compartment can be
removed.
•
•
•
•
Detergent can also accumulate inside the recess which should be
cleaned occasionally with a brush.
Once you have finished cleaning, replace the case and run a rinse
cycle without laundry.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
26
Removing stains
Stained, heavily-soiled, or greasy items may need to be prewashed or soaked for best
results. Soaking helps remove protein-type stains like blood, milk or grass. Prewashing
helps loosen soil before washing.
Stain removal rules
• Use warm water for soaking or prewashing stained laundry. Hot water can set stains.
• Most stains are easier to remove when they are fresh.
• Before treating any stain, find out what kind of stain it is, how old the stain is, what kind
of fabric it is, and whether the fabric is colourfast(Check the care label).
• Washing and drying can set some stains.
• Start with cold or warm water. Hot water can set some stains.
• When bleach is recommended, use a bleach that is safe for the fabric.
• Put the stained area face down on a paper towel or white cloth. Apply the stain remover
to the back of the stain. This forces the stain off fabric instead of through it.
Stain removal guide
27
Trouble shooting
Most problems are easily solved if you understand the cause.
Check the following list for problem before calling for service.
If the error mode such as IE, OE, UE were displayed on the control part, in order to solve
these problem, first turn off the power of the washing machine and then turn on the
power pressing Power button.
If PFE error mode was displayed on the control part, in order to solve this problem, first
turn off the power of the washing machine, second turn on the power pressing Power
button, third press SPIN button and last press Start/Pause button.
These cases are not malfunctions;
• The sound “wing” heard during water supply is the operating sound made by the water
inlet valve.
28
Specification
Specification
Model
RHWM81400DIDW
Dimension (mm)
(H)850 X (W)595 X (D)610
Maximum mass of dry clothes (kg)
8.0
Unit Weight (kg)
54 (Net) / 58 (Gross)
Standard Water Consumption
52L
Spin Speed (RPM)
Operating Water Pressure
400 / 800 / 1000 / 1400
0.03MPa ~ 0.8MPa (0.3kgf/cm2 ~ 8kgf/cm2)
Wiring
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
29
Connection to the mains supply
WARNING- THIS APPLIANCE MUST BE EARTHED
This appliance is designed to operate from a mains supply of AC230V ~ 50HZ.
Check that the voltage marked on the product corresponds with your supply voltage.
This product is fitted with a 13A plug complying with BS1363.
If this plug is unsuitable or needs to be replaced, please note the following:
Important: The wires in the mains lead are
Coloured in accordance with the following code:
GREEN/YELLOW - EARTH
BLUE - NEUTRAL
BROWN - LIVE
For UK use only – Plug fitting details (where applicable):
As the colours of the wires in the mains lead of this appliance may not correspond with
the coloured markings identifying the terminals in your plug, proceed as follows:
The GREEN/YELLOW wire is the EARTH and must be connected to the terminal which
is marked with the letter E or by the earth symbol or coloured GREEN or
GREEN/YELLOW.
The BLUE wire is the NEUTRAL and must be connected to
the terminal marked with the letter N or coloured BLACK.
The BROWN wire is the LIVE wire and must be connected
To the terminal marked with the letter L or coloured RED.
Always ensure that the plug cord grip is fastened correctly.
If a 13A (BS1363) fused plug is used it must be fitted with a 13amp fuse conforming to
BS1362 and be BSI or ASTA approved.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
30
Spare parts
Spare part
Contact details
Detergent drawer
Available at www.productcareuk.com or
call 0845 208 8750
Door
Available at www.productcareuk.com or
call 0845 208 8750
Door seal
Available at www.productcareuk.com or
call 0845 208 8750
Adjustable leg(s)
Available at www.productcareuk.com or
call 0845 208 8750
Inlet hose
Available at www.productcareuk.com or
call 0845 208 8750
Plastic caps
Available at www.productcareuk.com or
call 0845 208 8750
Pump
Available at www.productcareuk.com or
call 0845 208 8750
Motor
Available at www.productcareuk.com or
call 0845 208 8750
PCB
Available at www.productcareuk.com or
call 0845 208 8750
Other
Available at www.productcareuk.com or
call 0845 208 8750
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
31
For Customer Services & Spare Parts
please call
0845 208 8750
Opening times: Monday - Friday
8am – 6pm & Saturday 9am –1pm
or visit us at
www.productcareuk.com
Revision 1
This symbol is known as the 'Crossed-out wheelie bin Symbol'. When this symbol is
marked on a product/batteries, it means that the product/batteries should not be
disposed of with your general household waste. Only discard electrical/electronic/battery
items in separate collection schemes, which cater for the recovery and recycling of
materials contained within. Your co-operation is vital to make sure the success of these
schemes and for the protection of the environment. For your nearest disposal facility, visit
www.recycle-more.co.uk or ask in store for details.
We reserve the right due to possible changes to design to alter the instruction manual
without prior notice.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
Download PDF