datasheet for ACL396 by ACL Inc.

datasheet for ACL396 by ACL Inc.
ACL 395
Resistivity Meter
Precision Auditor for ESD-Protected Areas
The ACL 395 handheld meter features sophisticated circuitry that produces
higher accuracy than other pocket-sized meters. This allows for the same
advantages as megohmmeters, but at an economical price.
Utilizing color-coded zones, the LED scale is easy to read and interpret.
Half decade measurements give a closer indication to actual value. A specially colored “warning” stage alerts the auditor to material approaching
the upper end of the dissipative scale, so that it can be designated as nearly
out of specification.
Unlike other pocket-sized meters, the ACL 395 features conductive rubber
rails for the best contact possible. This yields higher accuracy when assessing packaging and assembly lines using the parallel resistivity probe
method ASTM D257. When the optional 5-lb probes are used, this meter
will comply with IEC 61340-4-1, ANSI/ESDA S4.1 & ANSI/ESDA S7.1 for RTG
and RTT testing, making it ideal for auditing in ESD production areas and
Easy to Use:
To measure resistivity in ohms per
square, test using the built-in rubber
electrodes. To measure resistance in
ohms, test using the optional external
5-lb probes. Detailed instructions are
found in the ACL 395 manual.
The flush façade of the ACL 395 is contemporary in design and functional in
purpose. The face plate includes an integrated press button and provides
protection for the LED scale. This prevents battery drain and lessens the
potential for breakage.
The ACL 395 meter can be used in all facets of material production including engineering, maintenance, quality control, incoming inspection, manufacturing and research departments for the testing of anti-static mats,
floor finishes, paints, wrist straps, smocks, bags and containers.
Product #395 includes tester, two cables, 9volt battery, and calibration certificate.
Accuracy: +/- 0.25 decade in the dissipative range
Product #396 includes two 5-lb probes and a
foam-lined carrying case.
Test Voltage: 10 volts at values less than 106
100 volts at values of 106 and greater
Resistivity Limits: 103 - 1012 ohms per square
Power Supply: 9-volt alkaline battery
Resistance Limits (when using external probes): 103 - 1012 ohms
LED Colors: Green 103 - 106,Yellow 3 x 106 - 109,Orange 3 x 109 - 1010
Red 1011 - 1012
Weight: 8.9 ounces
Size: 5 ¼” x 1 ⅜” x 3”
840 W. 49th Place · Chicago, IL 60609
800.782.8420 · 847.981.9212 · fax 847.981.9278 ·
ACL Inc. registered to
ISO-9001 : 2008
Certificate NO. 10002746
Rev. 11/30/12, mkb
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF