Rosemount 2051 Pressure Transmitter Product Data Sheet

Rosemount 2051 Pressure Transmitter Product Data Sheet
Product Data Sheet
September 2014
00813-0100-4101, Rev KA
Rosemount 2051 Pressure Transmitter

Rosemount Coplanar™ platform enables integration of primary elements, manifolds, and remote seal
solutions

Best in Class performance with up to 0.05% high accuracy option

IEC 62591 (WirelessHART®) Protocol enables cost effective installations

Local Operator Interface (LOI) offers easy to use configuration capabilities at the transmitter

Protocols available include HART® 4-20 mA, FOUNDATION™ fieldbus, PROFIBUS® PA, HART 1-5 Vdc Low
Power

Selectable HART Revision prepares your plant for the latest HART capabilities while ensuring seamless
integration with today's systems

SIL2 safety certification to IEC 61508 is available with the full 4-20 mA HART offering to simplify
compliance
Rosemount 2051
September 2014
Rosemount 2051 Pressure Transmitter Product Offering
Foundation of reliable measurement

Differential, gage, and absolute pressure measurement

Select from an extensive offering of DP Flowmeters, Liquid Level, Manifolds and
Flanges.

Available with variety of protocols and materials
Best-in-class capabilities extended to IEC 62591 (WirelessHART)

Cost effectively implement wireless on the industry's most proven platform.

Optimize safety with the industry's only intrinsically safe power module.

Eliminate wiring design and construction complexities to lower costs by 40-60%.

Quickly deploy new pressure, level and flow measurements in 70% less time.
Innovative, integrated DP Flowmeters

Fully assembled and leak tested for out-of-the-box installation

Reduce straight pipe requirements, lower permanent pressure loss, and achieve
accurate measurement in small line sizes.

Up to 2.00% volumetric flow accuracy at 5:1 turndown
Proven, reliable, and innovative DP Level technologies

Connect to virtually any process with a comprehensive offering of process
connections, fill fluids, direct mount or capillary connections and materials.

Quantify and optimize total system performance with QZ option.

Optimize level measurement with cost efficient Tuned-System Assemblies.
Instrument manifolds – quality, convenient, and easy

Designed and engineered for optimal performance with Rosemount transmitters

Save installation time and money with factory assembly.

Offers a variety of styles, materials, and configurations
Contents
Rosemount 2051C Coplanar Pressure Transmitter . . . . . . . . . . 3
Rosemount 2051T In-Line Pressure Transmitter . . . . . . . . . . . 11
Rosemount 2051CF Flowmeters . . . . . . . . . . . . . . . . . . . . . . . . . 17
Rosemount 2051L Liquid Level Transmitter . . . . . . . . . . . . . . . 36
2
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Rosemount 2051 Product Certifications . . . . . . . . . . . . . . . . . . 53
Dimensional Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
www.rosemount.com
September 2014
Rosemount 2051
Rosemount 2051C Coplanar Pressure Transmitter
Transmitter output code
Configuration
4-20 mA HART
2051
A
2051 with Selectable HART(1)
Lower Power
2051
M
2051 with Selectable HART(1)
2051C Coplanar
Pressure Transmitter
FOUNDATION fieldbus
F
PROFIBUS
W
Wireless
X
(1) The 4-20mA with Selectable HART device can be ordered with Transmitter
Output option code A plus any of the following options codes: M4, QT, DZ,
CR, CS, CT, HR5, HR7.
Additional information
Specifications: page 43
Certifications: page 53
Dimensional Drawings: page 61
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 51 for more information on Material Selection..
Table 1. Rosemount 2051C Coplanar Pressure Transmitters Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Transmitter type
2051C
Coplanar Pressure Transmitter
Measurement type
D
Differential
★
G
Gage
★
Pressure range
2051CD
2051CG
1
-25 to 25 inH2O (-62.2 to 62.2 mbar)
-25 to 25 inH2O (-62.2 to 62.2 mbar)
★
2
-250 to 250 inH2O (-623 to 623 mbar)
-250 to 250 inH2O (-623 to 623 mbar)
★
3
-1000 to 1000 inH2O (-2.5 to 2.5 bar)
-393 to 1000 inH2O (-0.98 to 2.5 bar)
★
4
-300 to 300 psi (-20.7 to 20.7 bar)
-14.2 to 300 psi (-0.98 to 20.7 bar)
★
5
-2000 to 2000 psi (-137.9 to 137.9 bar)
-14.2 to 2000 psi (-0.98 to 137.9 bar)
★
www.rosemount.com
3
Rosemount 2051
September 2014
Table 1. Rosemount 2051C Coplanar Pressure Transmitters Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Transmitter output
A(1)
4–20 mA with Digital Signal Based on HART Protocol
★
F
FOUNDATION fieldbus Protocol
★
W
PROFIBUS PA Protocol
★
X
Wireless
★
M
Low-Power, 1–5 Vdc with Digital Signal Based on HART Protocol
Materials of construction
Process flange type
Flange material
Drain/vent
2
Coplanar
SST
SST
★
3(2)
Coplanar
Cast C-276
Alloy C-276
★
5
Coplanar
Plated CS
SST
★
7(2)
Coplanar
SST
Alloy C-276
★
8(2)
Coplanar
Plated CS
Alloy C-276
★
0
Alternate Process Connection
★
Isolating diaphragm
2(2)
316L SST
★
3(2)
Alloy C-276
★
5(3)(4)
Tantalum
O-ring
A
Glass-filled PTFE
★
B
Graphite-filled PTFE
★
Sensor fill fluid
1
Silicone
★
2(4)
Inert
★
Housing material
Conduit entry size
A
Aluminum
½–14 NPT
★
B
Aluminum
M20 × 1.5
★
SST
½–14 NPT
★
J
(5)
SST
M20 × 1.5
★
P(6)
Engineered Polymer
No Conduit Entries
★
D
Aluminum
G½
M(5)
SST
G½
K
4
www.rosemount.com
September 2014
Rosemount 2051
Table 1. Rosemount 2051C Coplanar Pressure Transmitters Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Wireless options (requires Wireless output code X and Engineered Polymer housing code P)
Wireless transmit rate, operating frequency and protocol
WA3
User Configurable Transmit Rate, 2.4GHz WirelessHART
★
Antenna and SmartPower™
WP5
Internal Antenna, Compatible with Green Power Module (I.S. Power Module Sold Separately)
★
Options (include with selected model number)
Extended product warranty
WR3
3-year limited warranty
★
WR5
5-year limited warranty
★
HART revision configuration
HR5(7)(19)
Configured for HART Revision 5
★
HR7(8)(19)
Configured for HART Revision 7
★
PlantWeb control functionality
A01
FOUNDATION fieldbus Advanced Control Function Block Suite
★
Alternate flange(9)
H2
Traditional Flange, 316 SST, SST Drain/Vent
★
H3(2)
Traditional Flange, Cast C-276, Alloy C-276 Drain/Vent
★
H7(2)
Traditional Flange, 316 SST, Alloy C-276 Drain/Vent
★
HJ
DIN Compliant Traditional Flange, SST, 7/16 in. Adapter/Manifold Bolting
★
FA
Level Flange, SST, 2 in., ANSI Class 150, Vertical Mount
★
FB
Level Flange, SST, 2 in., ANSI Class 300, Vertical Mount
★
FC
Level Flange, SST, 3 in., ANSI Class 150, Vertical Mount
★
FD
Level Flange, SST, 3 in., ANSI Class 300, Vertical Mount
★
FP
DIN Level Flange, SST, DN 50, PN 40, Vertical Mount
★
FQ
DIN Level Flange, SST, DN 80, PN 40, Vertical Mount
★
Alternate flange(10)
HK(11)
DIN Compliant Traditional Flange, SST, 10 mm Adapter/Manifold Bolting
HL
DIN Compliant Traditional Flange, SST, 12 mm Adapter/Manifold Bolting
Manifold assembly(11)(12)
S5
Assemble to Rosemount 305 Integral Manifold
★
S6
Assemble to Rosemount 304 Manifold or Connection System
★
www.rosemount.com
5
Rosemount 2051
September 2014
Table 1. Rosemount 2051C Coplanar Pressure Transmitters Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Integral mount primary element(11)(12)
S4(13)
Assemble to Rosemount 405A, 485, or 585 Annubar® primary element or 1195 Integral Orifice primary element
★
S3
Assemble to Rosemount 405C or 405P Compact Orifice Plate
★
Seal assemblies(12)
S1(14)
(15)
S2
Assemble to one Rosemount 1199 diaphragm seal
★
Assemble to two Rosemount 1199 diaphragm seals
★
Mounting brackets
B1
Traditional Flange Bracket for 2-in. Pipe Mounting, CS Bolts
★
B2
Traditional Flange Bracket for Panel Mounting, CS Bolts
★
B3
Traditional Flange Flat Bracket for 2-in. Pipe Mounting, CS Bolts
★
B4
Coplanar Flange Bracket for 2-in. Pipe or Panel Mounting, all SST
★
B7
B1 Bracket with Series 300 SST Bolts
★
B8
B2 Bracket with Series 300 SST Bolts
★
B9
B3 Bracket with Series 300 SST Bolts
★
BA
SST B1 Bracket with Series 300 SST Bolts
★
BC
SST B3 Bracket with Series 300 SST Bolts
★
Product certifications
E1(5)
ATEX Flameproof
★
E2(5)
INMETRO Flameproof
★
E3(5)
China Flameproof
★
E4(5)
TIIS Flameproof
★
E5
FM Explosion-proof, Dust Ignition-proof
★
E6
CSA Explosion-proof, Dust Ignition-proof, Division 2
★
E7(5)
IECEx Flameproof
★
EW
India (CCOE) Flameproof Approval
★
I1(5)
ATEX Intrinsic Safety
★
I2(5)
INMETRO Intrinsically Safe
★
I3(5)
China Intrinsic Safety
★
TIIS Intrinsic Safety
★
I5
FM Intrinsically Safe, Division 2
★
I6
CSA Intrinsically Safe
★
I7(5)
IECEx Intrinsic Safety
★
IA(16)
ATEX FISCO Intrinsic Safety
★
IE(16)
FM FISCO Intrinsically Safe
★
IF(16)
CSA FISCO Intrinsically Safe
★
I4
6
(5)(6)
www.rosemount.com
September 2014
Rosemount 2051
Table 1. Rosemount 2051C Coplanar Pressure Transmitters Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
IG(16)
IECEx FISCO Intrinsically Safe
★
IW(5)
India (CCOE) Intrinsically Safe
★
K1(5)
ATEX Flameproof, Intrinsic Safety, Type n, Dust
★
K2
INMETRO Flameproof and Intrinsic Safety
★
K5
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
(5)
IECEx Flameproof, Intrinsic Safety, Type n and Dust
★
(5)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
★
KB
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
KC(5)
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
★
KD(5)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe
★
N1(5)
ATEX Type n
★
N7(5)
IECEx Type n
★
ND(5)
ATEX Dust
★
EM
Technical Regulations Customs Union (EAC) Flameproof
★
IM
Technical Regulations Customs Union (EAC) Intrinsic Safety
★
KM
Technical Regulations Customs Union (EAC) Flameproof and Intrinsic Safety
★
K6
K7
KA
Drinking water approval
DW(17)
NSF Drinking Water Approval
★
Shipboard approvals
SBS(4)
American Bureau of Shipping (ABS) Type Approval
★
SBV(4)
Bureau Veritas (BV) Type Approval
★
SDN(4)
Det Norske Veritas (DNV) Type Approval
★
SLL(4)
Lloyds Register (LR) Type Approval
★
Bolting materials
L4
Austenitic 316 SST Bolts
★
L5
ASTM A 193, Grade B7M Bolts
★
L6
Alloy K-500 Bolts
★
L8
ASTM A 193 Class 2, Grade B8M Bolts
★
Display and interface options
M4(18)
LCD Display with Local Operator Interface
★
M5
LCD Display
★
Hardware adjustments
D4(19)
Zero and Span Configuration Buttons
★
DZ(20)
Digital Zero Trim
★
www.rosemount.com
7
Rosemount 2051
September 2014
Table 1. Rosemount 2051C Coplanar Pressure Transmitters Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Flange adapters
DF(21)
★
1
/2-14 NPT Flange Adapters
Conduit plug
DO(4)(22)
★
316 SST Conduit Plug
RC 1/4 RC 1/2 process connection
D9(23)
RC 1/4 Flange with RC 1/2 Flange Adapter - SST
Ground screw
V5(4)(24)
★
External Ground Screw Assembly
Performance
P8(25)
★
High Performance Option
Transient protection
T1(4)(26)
★
Transient Protection Terminal Block
Software configuration
C1 (20)
Custom Software Configuration (Completed CDS 00806-0100-4101 or 00806-0100-4100 for Wireless required
with order)
★
Alarm limit
C4(19)(27)
NAMUR alarm and saturation levels, high alarm
★
CN(19)(27)
NAMUR alarm and saturation levels, low alarm
★
CR(19)
Custom Alarm and saturation signal levels, high alarm (requires C1 and Configuration Data Sheet)
★
CS(19)
Custom Alarm and saturation signal levels, low alarm (requires C1 and Configuration Data Sheet)
★
CT(19)
Low Alarm (standard Rosemount alarm and saturation levels)
★
Pressure testing
P1
Hydrostatic testing with certificate
Cleaning process area
P2
Cleaning for Special Service
P3
Cleaning for < 1 PPM Chlorine/Flourine
Maximum static line pressure
P9
4500 psig (310 bar) Static Pressure Limit (2051CD Ranges 2-5 only)
★
Calibration certification
Q4
Calibration Certificate
★
QG
Calibration Certificate and GOST Verification Certificate
★
QP
Calibration certification and tamper evident seal
★
8
www.rosemount.com
September 2014
Rosemount 2051
Table 1. Rosemount 2051C Coplanar Pressure Transmitters Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Material traceability certification
Q8
Material Traceability Certification per EN 10204 3.1
★
Quality certification for safety
QS(28)
QT
(28)
Prior-use certificate of FMEDA data
★
Safety Certified to IEC 61508 with certificate of FMEDA
★
Surface finish
Q16
Surface finish certification for sanitary remote seals
★
Toolkit total system performance reports
QZ
Remote Seal System Performance Calculation Report
★
Conduit electrical connection
GE(4)
M12, 4-pin, Male Connector (eurofast®)
★
GM(4)
A size Mini, 4-pin, Male Connector (minifast®)
★
NACE certificate
Q15(29)
Certificate of Compliance to NACE MR0175/ISO 15156 for wetted materials
★
Q25(29)
Certificate of Compliance to NACE MR0103 for wetted materials
★
Typical model number: 2051C D 2 A 2 2 A 1 A B4 M5
(1) HART Revision 5 is the default HART output. The Rosemount 2051 with Selectable HART can be factory or field configured to HART Revision 7. To order HART
Revision 7 factory configured, add option code HR7.
(2) Materials of Construction comply with recommendations per NACE MR0175/ISO 15156 for sour oil field production environments. Environmental limits apply to
certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments. Order with Q15 or Q25 to
receive a NACE certificate.
(3) Available in Ranges 2-5 only.
(4) Not available with output code X.
(5) Not available with Low Power output code M.
(6) Only available with output code X.
(7) Configures the HART output to HART Revision 5. The device can be field configured to HART Revision 7 if needed.
(8) Configures the HART output to HART Revision 7. The device can be field configured to HART Revision 5 if needed.
(9) Requires 0 code in Materials of Construction for Alternate Process Connection.
(10) Requires 0 code in Materials of Construction for Alternate Process Connection.
(11) Not valid with optional code P9 for 4500 psi Static Pressure.
(12) “Assemble-to” items are specified separately and require a completed model number.
(13) Process Flange limited to Coplanar (codes 2, 3, 5, 7, 8) or Traditional (H2, H3, H7).
(14) Not valid with optional code D9 for RC1/2 Adapters.
www.rosemount.com
9
Rosemount 2051
September 2014
(15) Not valid with optional codes DF or D9 for Adapters.
(16) Only valid with FOUNDATION fieldbus output code F.
(17) Not available with Alloy C-276 isolator (3 code), tantalum isolator (5 code), all cast C-276 flanges, all plated CS flanges, all DIN flanges, all Level flanges,
assemble-to manifolds (S5 and S6 codes), assemble-to seals (S1 and S2 codes), assemble-to primary elements (S3 and S4 codes), surface finish certification (Q16
code), and remote seal system report (QZ code).
(18) Not available with FOUNDATION fieldbus output code F or Wireless Output Code X.
(19) Only Available with HART 4-20 mA (output codes A and M).
(20) Only available with HART 4-20 mA Output(Output Codes A) and Wireless Output (Output Code X).
(21) Not valid with Alternate Process Connection options S3, S4, S5, S6.
(22) Transmitter is shipped with 316 SST conduit plug (uninstalled) in place of standard carbon steel conduit plug.
(23) Not available with Alternate Process Connection: DIN Flanges and Level Flanges.
(24) The V5 option is not needed with the T1 option; external ground screw assembly is included with the T1 option.
(25) Available with 4-20 mA HART output code A, Wireless output code X, FOUNDATION fieldbus output code F, 2051C Ranges 2-5 or 2051T Ranges 1-4, SST and Alloy
C 276 diaphragms and silicone fill fluid. High Performance Option includes 0.05% Reference Accuracy, and 5 year stability. See Performance specifications for
details.
(26) The T1 option is not needed with FISCO Product Certifications; transient protection is included in the FISCO product certification codes IA and IE.
(27) NAMUR-Compliant operation is pre-set at the factory and cannot be changed to standard operation in the field.
(28) Only available with HART 4-20 mA output (output code A).
(29) NACE Compliant wetted materials are identified by Footnote (2).
10
www.rosemount.com
September 2014
Rosemount 2051
Rosemount 2051T In-Line Pressure Transmitter
Configuration
2051T In-Line
Wireless Pressure Transmitter
Transmitter output code
4-20 mA HART
2051
2051 with Selectable HART(1)
A
Lower Power
2051
2051 with Selectable HART(1)
M
FOUNDATION fieldbus
F
PROFIBUS
W
Wireless
X
(1) The 4-20mA with Selectable HART device can be ordered with Transmitter
Output option code A plus any of the following options codes: M4, QT, DZ,
CR, CS, CT, HR5, HR7.
Additional information
Specifications: page 43
Certifications: page 53
Dimensional Drawings: page 61
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See
page 51 for more information on Material Selection..Ordering Information
Table 2. Rosemount 2051T In-Line Pressure Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Transmitter type
2051T
In-Line Pressure Transmitter
★
Pressure type
G
Gage
★
A(1)
Absolute
★
Pressure range
2051TG
2051TA
★
1
-14.7 to 30 psi (-1.0 to 2.1 bar)
0 to 30 psi (0 to 2.1 bar)
★
2
-14.7 to 150 psi (-1.0 to 10.3 bar)
0 to 150 psi (0 to 10.3 bar)
★
3
-14.7 to 800 psi (-1.0 to 55 bar)
0 to 800 psi (0 to 55 bar)
★
4
-14.7 to 4000 psi (-1.0 to 276 bar)
0 to 4000 psi (0 to 276 bar)
★
5
-14.7 to 10000 psi (-1.0 to 689 bar)
0 to 10000 psi (0 to 689 bar)
★
Transmitter output
A(2)
4–20 mA with Digital Signal Based on HART Protocol
★
F
FOUNDATION fieldbus Protocol
★
www.rosemount.com
11
Rosemount 2051
September 2014
Table 2. Rosemount 2051T In-Line Pressure Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
W
PROFIBUS PA Protocol
★
X
Wireless
★
M
Low-Power, 1–5 Vdc with Digital Signal Based on HART Protocol
Process connection style
★
1
2B
/2–14 NPT female
(3)
★
1
2C
G /2 A DIN 16288 male
2F(4)
Coned and Threaded, Compatible with Autoclave Type F-250-C (Range 5 only)
Isolating diaphragm
Process connection wetted parts material
2(5)
316L SST
316L SST
★
3(5)
Alloy C-276
Alloy C-276
★
Sensor fill fluid
1
Silicone
★
2(4)
Inert
★
Housing material
Conduit entry size
A
Aluminum
½–14 NPT
★
B
Aluminum
M20 × 1.5
★
J
SST
½–14 NPT
★
K(6)
SST
M20 × 1.5
★
P(7)
Engineered Polymer
No Conduit Entries
★
D
Aluminum
G½
M(6)
SST
G½
Wireless options (requires Wireless output code X and Engineered Polymer housing code P)
Wireless transmit rate, operating frequency and protocol
WA3
User Configurable Transmit Rate, 2.4GHz WirelessHART
★
Antenna and SmartPower
WP5
Internal Antenna, Compatible with Green Power Module (I.S. Power Module Sold Separately)
★
Options (include with selected model number)
Extended product warranty
WR3
3-year limited warranty
★
WR5
5-year limited warranty
★
12
www.rosemount.com
September 2014
Rosemount 2051
Table 2. Rosemount 2051T In-Line Pressure Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
HART revision configuration
HR5(8)(19)
Configured for HART Revision 5
★
(9)(19)
Configured for HART Revision 7
★
HR7
PlantWeb control functionality
A01
FOUNDATION fieldbus Advanced Control Function Block Suite
★
Manifold assemblies
S5(10)
Assemble to Rosemount 306 Integral Manifold
★
Seal assemblies
S1(10)
Assemble to one Rosemount 1199 diaphragm seal
★
Mounting bracket
B4
Bracket for 2-in. Pipe or Panel Mounting, All SST
★
Product certifications
E1(6)
ATEX Flameproof
★
E2(6)
INMETRO Flameproof
★
E3(6)
China Flameproof
★
E4(6)
TIIS Flameproof
★
E5
FM Explosion-proof, Dust Ignition-proof
★
E6
CSA Explosion-proof, Dust Ignition-proof, Division 2
★
E7(6)
IECEx Flameproof
★
EW(6)
India (CCOE) Flameproof Approval
★
I1(6)
ATEX Intrinsic Safety
★
I2(6)
INMETRO Intrinsically Safe
★
I3(6)
China Intrinsic Safety
★
I4(6)(7)
TIIS Intrinsic Safety
★
I5
FM Intrinsically Safe, Division 2
★
CSA Intrinsically Safe
★
IECEx Intrinsic Safety
★
IA(13)
ATEX FISCO Intrinsic Safety
★
IE(11)
FM FISCO Intrinsically Safe
★
IF(11)
CSA FISCO Intrinsically Safe
★
IG(11)
IECEx FISCO Intrinsically Safe
★
IW(6)
India (CCOE) Intrinsic Safety Approval
★
K1(6)
ATEX Flameproof, Intrinsic Safety, Type n, Dust
★
K5
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
I6
I7
(6)
www.rosemount.com
13
Rosemount 2051
September 2014
Table 2. Rosemount 2051T In-Line Pressure Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
K6
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
K7(6)
IECEx Flameproof, Intrinsic Safety, Type n, Dust
★
KA(6)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
★
KB
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
★
KC
(6)
KD(6)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe
★
(6)
ATEX Type n
★
(6)
N7
IECEx Type n
★
ND(6)
ATEX Dust
★
EM
Technical Regulations Customs Union (EAC) Flameproof
★
IM
Technical Regulations Customs Union (EAC) Intrinsic Safety
★
KM
Technical Regulations Customs Union (EAC) Flameproof and Intrinsic Safety
★
N1
Drinking water approval
DW(12)
NSF Drinking Water Approval
★
Shipboard approvals
SBS(4)
American Bureau of Shipping (ABS) Type Approval
★
SBV(4)
Bureau Veritas (BV) Type Approval
★
SDN(4)
Det Norske Veritas (DNV) Type Approval
★
SLL(4)
Lloyds Register (LR) Type Approval
★
Display and interface options
M4(13)
LCD Display with Local Operator Interface
★
M5
LCD Display
★
Hardware adjustments
D4(14)
Zero and Span Configuration Buttons
★
DZ(15)
Digital Zero Trim
★
Wireless SST sensor module
WSM(7)
Wireless SST Sensor Module
★
Conduit plug
DO(4)(16)
316 SST Conduit Plug
★
Ground screw
V5(4)(17)
External Ground Screw Assembly
★
Performance
P8(18)
14
High Performance Option
★
www.rosemount.com
September 2014
Rosemount 2051
Table 2. Rosemount 2051T In-Line Pressure Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Terminal blocks
T1(4)(19)
Transient Protection Terminal Block
★
Software configuration
C1(15)
Custom Software Configuration (completed CDS 00806-0100-4101 or 00806-0100-4100 for Wireless required
with order)
★
Alarm limits
C4(14)(20)
Analog Output Levels Compliant with NAMUR Recommendation NE 43, Alarm High
★
CN(14)(21)
Analog Output Levels Compliant with NAMUR Recommendation NE 43, Alarm Low
★
CR(14)
Custom Alarm and saturation signal levels, high alarm (requires C1 and Configuration Data Sheet)
★
CS(14)
Custom Alarm and saturation signal levels, low alarm (requires C1 and Configuration Data Sheet)
★
CT(14)
Low Alarm (standard Rosemount alarm and saturation levels)
★
Pressure testing
P1
Hydrostatic testing with certificate
Cleaning process area(22)
P2
Cleaning for Special Service
P3
Cleaning for <1 PPM Chlorine/Fluorine
Calibration certification
Q4
Calibration Certificate
★
QG
Calibration Certificate and GOST Verification Certificate
★
QP
Calibration Certificate and tamper evident seal
★
Material traceability certification
Q8
Material Traceability Certification per EN 10204 3.1
★
Quality certification for safety
QS(21)
QT
(21)
Prior-use certificate of FMEDA data
★
Safety Certified to IEC 61508 with certificate of FMEDA
★
Surface finish
Q16
Surface finish certification for sanitary remote seals
★
Toolkit total system performance reports
QZ
Remote Seal System Performance Calculation Report
★
Conduit electrical connector
GE(4)
M12, 4-pin, Male Connector (eurofast)
★
GM(4)
A size Mini, 4-pin, Male Connector (minifast)
★
www.rosemount.com
15
Rosemount 2051
September 2014
Table 2. Rosemount 2051T In-Line Pressure Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
NACE certificate
Q15(23)
(23)
Q25
Certificate of Compliance to NACE MR0175/ISO 15156 for wetted materials
★
Certificate of Compliance to NACE MR0103 for wetted materials
★
Typical model number:
2051T G 3 A 2B
2
1 A B4 M5
(1) Wireless Output (code X) only available in absolute measurement type (code A) in range 1-5 with 1/2 14 NPT process connection (code 2B), and housing code
(code P).
(2) HART Revision 5 is the default HART output. The Rosemount 2051 with Selectable HART can be factory or field configured to HART Revision 7. To order HART
Revision 7 factory configured, add option code HR7.
(3) Wireless output (code X) only available in G1/2 A DIN 16288 Male process connection (code 2C) with range 1-4, 316 SST isolating diaphragm (code 2), silicone
fill fluid (code 1), and housing code (code P).
(4) Not available with output code X.
(5) Materials of Construction comply with recommendations per NACE MR0175/ISO 15156 for sour oil field production environments. Environmental limits apply to
certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments. Order with Q15 or Q25 to
receive a NACE certificate.
(6) Not available with Low Power output code M.
(7) Only available with output code X.
(8) Configures the HART output to HART Revision 5. The device can be field configured to HART Revision 7 if needed.
(9) Configures the HART output to HART Revision 7. The device can be field configured to HART Revision 5 if needed.
(10) “Assemble-to” items are specified separately and require a completed model number.
(11) Only valid with FOUNDATION fieldbus output code F.
(12) Not available with coned and threaded connection (2F code), assemble-to manifold (S5 code), assemble-to seal (S1 code), surface finish certification (Q16 code),
remote seal system report (QZ code).
(13) Not available with FOUNDATION fieldbus output code F or Wireless output code X
(14) Only Available with HART (output codes A and M).
(15) Only available with HART 4-20 mA Output (output code A) and Wireless Output (output code X).
(16) Transmitter is shipped with 316 SST conduit plug (uninstalled) in place of standard carbon steel conduit plug.
(17) The V5 option is not needed with the T1 option; external ground screw assembly is included with the T1 option.
(18) Available with 4-20 mA HART output code A, Wireless output code X, FOUNDATION fieldbus output code F, 2051C Ranges 2-5 or 2051T Ranges 1-4, SST and Alloy
C 276 diaphragms and silicone fill fluid. High Performance Option includes 0.05% Reference Accuracy, and 5 year stability. See Performance specifications for
details.
(19) The T1 option is not needed with FISCO Product Certifications; transient protection is included in the FISCO product certification codes IA and IE.
(20) NAMUR-Compliant operation is pre-set at the factory and cannot be changed to standard operation in the field.
(21) Only available with HART 4-20 mA output (output code A).
(22) Not valid with Alternate Process Connection S5.
(23) NACE Compliant wetted materials are identified by Footnote (2).
16
www.rosemount.com
September 2014
Rosemount 2051
Rosemount 2051CF Flowmeters
Configuration
Transmitter output code
4-20 mA HART
2051
2051 with Selectable HART(1)
A
Lower Power
2051
2051 with Selectable HART(1)
M
FOUNDATION fieldbus
F
PROFIBUS
W
Wireless
X
(1) The 4-20 mA with Selectable HART device can be ordered with
Transmitter Output option code A plus any of the following options
codes: M4, QT, DZ, CR, CS, CT, HR5, HR7.
Rosemount 2051CFA Annubar
Flowmeter
Additional information
Specifications: page 43
Certifications: page 53
Dimensional Drawings: page 61
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment.
See page 51 for more information on Material Selection.
Table 3. Rosemount 2051CFA Annubar Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Product description
2051CFA
Annubar Flowmeter
Measurement type
Differential Pressure
★
L
Liquid
★
G
Gas
★
S
Steam
★
2-in. (50 mm)
★
D
Fluid type
Line size
020
025
2 /2-in. (63.5 mm)
★
030
3-in. (80 mm)
★
035
1
1
3 /2-in. (89 mm)
www.rosemount.com
★
17
Rosemount 2051
September 2014
Table 3. Rosemount 2051CFA Annubar Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
040
4-in. (100 mm)
★
050
5-in. (125 mm)
★
060
6-in. (150 mm)
★
070
7-in. (175 mm)
★
080
8-in. (200 mm)
★
100
10-in. (250 mm)
★
120
12-in. (300 mm)
★
Pipe I.D. range
C
Range C from the Pipe I.D. table
★
D
Range D from the Pipe I.D. table
★
A
Range A from the Pipe I.D. table
B
Range B from the Pipe I.D. table
E
Range E from the Pipe I.D. table
Z
Non-standard Pipe I.D. Range or Line Sizes greater than 12 in.
Pipe material/mounting assembly material
C
Carbon steel (A105)
★
S
316 Stainless Steel
★
0(1)
No Mounting (Customer Supplied)
G
Chrome-Moly Grade F-11
N
Chrome-Moly Grade F-22
J
Chrome-Moly Grade F-91
Piping orientation
H
Horizontal Piping
★
D
Vertical Piping with Downwards Flow
★
U
Vertical Piping with Upwards Flow
★
P
Pak-Lok
★
F
Flanged with opposite side support
★
Annubar type
Sensor material
316 Stainless Steel
★
1
Sensor size 1 — Line sizes 2-in. (50 mm) to 8-in. (200 mm)
★
2
Sensor size 2 — Line sizes 6-in. (150 mm) to 96-in. (2400 mm)
★
3
Sensor size 3 — Line sizes greater than 12-in. (300 mm)
★
S
Sensor size
Mounting type
T1
Compression or Threaded Connection
★
A1
150# RF ANSI
★
18
www.rosemount.com
September 2014
Rosemount 2051
Table 3. Rosemount 2051CFA Annubar Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
A3
300# RF ANSI
★
A6
600# RF ANSI
★
D1
DN PN16 Flange
★
D3
DN PN40 Flange
★
D6
DN PN100 Flange
★
R1
150# RTJ Flange
R3
300# RTJ Flange
R6
600# RTJ Flange
Opposite side support or packing gland
0
No opposite side support or packing gland (required for Pak-Lok and Flange-Lok models)
★
Opposite Side Support (required for Flanged Models)
C
NPT Threaded Opposite Support Assembly – Extended Tip
★
D
Welded Opposite Support Assembly – Extended Tip
★
Isolation valve for Flo-Tap models
0(1)
★
Not Applicable or Customer Supplied
Temperature measurement
T
Integral RTD – not available with Flanged model greater than class 600#
★
0
No Temperature Sensor
★
R
Remote Thermowell and RTD
Transmitter connection platform
3
Direct-mount, Integral 3-valve Manifold– not available with Flanged model greater than class 600
★
5
Direct -mount, 5-valve Manifold – not available with Flanged model greater than class 600
★
7
Remote-mount NPT Connections (1/2-in. FNPT)
★
8
1
Remote-mount SW Connections ( /2-in.)
Differential pressure range
1
0 to 25 in H2O (0 to 62,3 mbar)
★
2
0 to 250 in H2O (0 to 623 mbar)
★
3
0 to 1000 in H2O (0 to 2,5 bar)
★
Transmitter output
A(2)
4–20 mA with digital signal based on HART Protocol
★
F
FOUNDATION fieldbus Protocol
★
W
PROFIBUS PA Protocol
★
X
Wireless
★
M
Low-Power, 1-5 Vdc with Digital Signal Based on HART Protocol
Transmitter housing material
Conduit entry size
A
Aluminum
1
/2-14 NPT
★
B
Aluminum
M20 x 1.5
★
www.rosemount.com
19
Rosemount 2051
September 2014
Table 3. Rosemount 2051CFA Annubar Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
J
K(3)
P
(4)
D
M
(3)
SST
1
/2-14 NPT
★
SST
M20 x 1.5
★
Engineered Polymer
No Conduit Entries
★
Aluminum
G1/2
SST
G1/2
Transmitter performance class
1
★
2.0% flow rate accuracy, 5:1 flow turndown, 2-year stability
Wireless options (requires Wireless output code X and Engineered Polymer housing code P)
Wireless transmit rate, operating frequency and protocol
WA3
★
User Configurable Transmit Rate, 2.4GHz WirelessHART
Antenna and SmartPower
WP5
Internal Antenna, Compatible with Green Power Module (I.S. Power Module Sold Separately)
★
Options (include with selected model number)
Extended product warranty
WR3
3-year limited warranty
★
WR5
5-year limited warranty
★
Special cleaning
P2(3)
Cleaning for Special Services
PA(3)
Cleaning per ASTM G93 Level D (Section 11.4)
Material testing
V1(3)
Dye Penetrant Exam
Material examination
V2(3)
Radiographic Examination
Special inspection
QC1(3)
Visual & Dimensional Inspection with Certificate
★
QC7(3)
Inspection & Performance Certificate
★
RL(3)
Surface finish for Low Pipe Reynolds # in Gas & Steam
★
RH(3)
Surface finish for High Pipe Reynolds # in Liquid
★
Surface finish
Material traceability certification
Q8(3)(5)
Material Traceability Certification per EN 10474:2004 3.1
★
Code conformance
J2 (3)
ANSI/ASME B31.1
J3(3)
ANSI/ASME B31.3
20
www.rosemount.com
September 2014
Rosemount 2051
Table 3. Rosemount 2051CFA Annubar Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Materials conformance
J5(3)(6)
NACE MR-0175 / ISO 15156
Country certification
J6(3)
European Pressure Directive (PED)
J1(3)
Canadian Registration
★
Instrument connections for remote mount options
G2(3)
G6
(3)
Needle Valves, Stainless Steel
★
OS&Y Gate Valve, Stainless Steel
★
G1(3)
Needle Valves, Carbon Steel
G3(3)
Needle Valves, Alloy C-276
G5(3)
OS&Y Gate Valve, Carbon Steel
G7(3)
OS&Y Gate Valve, Alloy C-276
Special shipment
Y1(3)
Mounting Hardware Shipped Separately
★
Product certifications
E1(3)
ATEX Flameproof
★
E2(3)
INMETRO Flameproof
★
E3(3)
China Flameproof
★
E5
FM Explosion-proof, Dust Ignition-proof
★
E6
CSA Explosion-proof, Dust Ignition-proof, Division 2
★
E7(3)
IECEx Flameproof
★
I1(3)
ATEX Intrinsic Safety
★
I2(3)
INMETRO Intrinsically Safe
★
I3(3)
China Intrinsic Safety
★
I5
FM Intrinsically Safe, Division 2
★
I6
CSA Intrinsically Safe
★
I7(3)
IECEx Intrinsic Safety
★
(3)(7)
ATEX FISCO Intrinsic Safety; for FOUNDATION fieldbus protocol only
★
(3)(7)
FM FISCO Intrinsically Safe
★
(3)(7)
IF
CSA FISCO Intrinsically Safe
★
IG(3)(7)
IECEx FISCO Intrinsically Safe
★
K1(3)
ATEX Flameproof, Intrinsic Safety, Type n, Dust
★
K5
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E5 and I5)
★
K6
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E6 and I6)
★
K7(3)
IECEx Flameproof, Dust Ignition-proof, Intrinsic Safety, Type n (combination of E7, I7, and N7)
★
KA(3)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
★
KB
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E5, E6, I5, and
I6)
★
IA
IE
www.rosemount.com
21
Rosemount 2051
September 2014
Table 3. Rosemount 2051CFA Annubar Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
KC(3)
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
★
KD(3)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe (combination of E5, I5, E6, I6, E1, and I1)
★
(3)
ATEX Type n
★
(3)
IECEx Type n
★
(3)
ATEX Dust
★
N1
N7
ND
Sensor fill fluid and O-ring options
L1(3)(8)
Inert Sensor Fill Fluid
★
(3)
Graphite-Filled (PTFE) O-ring
★
(3)(8)
Inert Sensor Fill Fluid and Graphite-Filled (PTFE) O-ring
★
L2
LA
Display and interface options
M4(3)(9)
LCD Display with Local Operator Interface
★
M5(3)
LCD Display
★
Transmitter calibration certification
Q4(3)
★
Calibration Certificate for Transmitter
Quality certification for safety
QS(3)(10)
Prior-use certificate of FMEDA data
★
QT(3)(10)
Safety Certified to IEC 61508 with certificate of FMEDA
★
Transient protection
T1(3)(8)(11)
★
Transient terminal block
Manifold for remote mount option
F2(3)
3-Valve Manifold, Stainless Steel
★
F6(3)
5-Valve Manifold, Stainless Steel
★
F1(3)
3-Valve Manifold, Carbon Steel
F5(3)
5-Valve Manifold, Carbon Steel
PlantWeb control functionality
A01(3)(7)
★
FOUNDATION fieldbus Advanced Control Function Block Suite
Hardware adjustments
D4(3)(12)
Zero and Span Hardware Adjustments
★
Digital Zero Trim
★
C4(3)(12)(14)
NAMUR Alarm and Saturation Levels, High Alarm
★
CN(3)(12)(14)
(3)(13)
DZ
Alarm limit
NAMUR Alarm and Saturation Levels, Low Alarm
★
(3)(12)
Custom Alarm and saturation signal levels, high alarm (requires C1 and Configuration Data Sheet)
★
(3)(12)
Custom Alarm and saturation signal levels, low alarm (requires C1 and Configuration Data Sheet)
★
(3)(12)
Low Alarm (standard Rosemount alarm and saturation levels)
★
CR
CS
CT
22
www.rosemount.com
September 2014
Rosemount 2051
Table 3. Rosemount 2051CFA Annubar Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Ground screw
V5(3)(8)(15)
★
External Ground Screw Assembly
HART revision configuration
HR5(3)(12)(16)
Configured for HART Revision 5
★
HR7(3)(12)(17)
Configured for HART Revision 7
★
Typical model number:
2051CFA
D
L
060
D
C
H
P
S
2
T1
0
0
0
3
2A
A
1A
3
(1) Provide the “A” dimension for Flanged (page Pressure-70) and Pak-Lok (page Pressure-70).
(2) HART Revision 5 is the default HART output. The Rosemount 2051 with Selectable HART can be factory or field configured to HART Revision 7. To order HART
Revision 7 factory configured, add option code HR7.
(3) Not available with Low Power Output Code M.
(4) Only available with output code X.
(5) Instrument Connections for Remote Mount Options and Isolation Valves for Flo-tap Models are not included in the Material Traceability Certification.
(6) Materials of Construction comply with metallurgical requirements within NACE MR0175/ISO for sour oil field production environments. Environmental limits
apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.
(7) Only valid with FOUNDATION fieldbus Output Code F.
(8) Not available with output code X.
(9) Not available with FOUNDATION fieldbus (Output Code F) or Wireless (Output Code X).
(10) Only available with 4-20 mA HART (Output Code A).
(11) Not available with Housing code 00, 5A or 7J. The T1 option is not needed with FISCO Product Certifications, transient protection is included with the FISCO
Product Certification code IA.
(12) Only available with 4-20 mA HART (output codes A and M).
(13) Only available with HART 4-20 mA Output (output codes A and M) and Wireless Output (output code X).
(14) NAMUR-Compliant operation is pre-set at the factory and cannot be changed to standard operation in the field.
(15) The V5 option is not needed with the T1 option; external ground screw assembly is included with the T1 option.
(16) Configures the HART output to HART Revision 5. The device can be field configured to HART Revision 7 if needed.
(17) Configures the HART output to HART Revision 7. The device can be field configured to HART Revision 5 if needed.
www.rosemount.com
23
Rosemount 2051
September 2014
Rosemount 2051CFC Compact Flowmeter
Additional information
Specifications: page 43
Certifications: page 53
Dimensional Drawings: page 61
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment.
See page 51 for more information on Material Selection.
Table 4. Rosemount 2051CFC Compact Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Product description
2051CFC
Compact Flowmeter
Measurement type
D
Differential Pressure
★
Primary element technology
A
Annubar Averaging Pitot Tube
C
Conditioning Orifice Plate
★
P
Orifice Plate
★
316 SST
★
005(1)
1/2-in. (15 mm)
★
010(1)
1-in. (25 mm)
★
Material type
S
Line size
015(1)
1 /2-in. (40 mm)
★
020
2-in. (50 mm)
★
030
3-in. (80 mm)
★
040
4-in. (100 mm)
★
060
6-in. (150 mm)
★
080
8-in. (200 mm)
★
100(2)(3)
10-in. (250 mm)
★
120 (2)(3)
12-in. (300 mm)
★
1
Primary element type
N000
Annubar Sensor Size 1
★
N040
0.40 Beta Ratio
★
N050
0.50 Beta Ratio
★
N065(4)
0.65 Beta Ratio
★
24
www.rosemount.com
September 2014
Rosemount 2051
Table 4. Rosemount 2051CFC Compact Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Temperature measurement
0
T
(5)
R
★
No Temperature Sensor
Integral RTD
Remote Thermowell and RTD
Transmitter connection platform
3
Direct-mount
★
7
Remote-mount, NPT Connections
★
Differential pressure range
1
0 to 25 in H2O (0 to 62,3 mbar)
★
2
0 to 250 in H2O (0 to 623 mbar)
★
3
0 to 1000 in H2O (0 to 2,5 bar)
★
Transmitter output
A(6)
4–20 mA with digital signal based on HART Protocol
★
F
FOUNDATION fieldbus Protocol
★
W
PROFIBUS PA Protocol
★
X
Wireless
★
M
Low-Power, 1-5 Vdc with Digital Signal Based on HART Protocol
Transmitter housing material
Conduit entry size
A
Aluminum
1
/2-14 NPT
★
B
Aluminum
M20 x 1.5
★
J
SST
1
/2-14 NPT
★
K(7)
SST
M20 x 1.5
★
P(8)
Engineered Polymer
No Conduit Entries
★
1
D
Aluminum
G /2
M(7)
SST
G1/2
Transmitter performance class
1
up to ±2.25% flow rate accuracy, 5:1 flow turndown, 2-year stability
★
Wireless options (requires Wireless output code X and Engineered Polymer housing code P)
Wireless transmit rate, operating frequency and protocol
WA3
User Configurable Transmit Rate, 2.4GHz WirelessHART
★
Antenna and SmartPower
WP5
Internal Antenna, Compatible with Green Power Module (I.S. Power Module Sold Separately)
★
Options (include with selected model number)
Extended product warranty
WR3
3-year limited warranty
★
WR5
5-year limited warranty
★
www.rosemount.com
25
Rosemount 2051
September 2014
Table 4. Rosemount 2051CFC Compact Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Installation accessories
AB(7)
ANSI Alignment Ring (150#) [only required for 10-in. (250 mm) and 12-in. (300 mm) line sizes]
★
(7)
ANSI Alignment Ring (300#) [only required for 10-in. (250 mm) and 12-in. (300 mm) line sizes]
★
(7)
ANSI Alignment Ring (600#) [only required for 10-in. (250 mm) and 12-in. (300 mm) line sizes]
★
(7)
DIN Alignment Ring (PN16)
★
(7)
DH
DIN Alignment Ring (PN40)
★
DJ(7)
DIN Alignment Ring (PN100)
★
AC
AD
DG
(7)
JIS Alignment Ring (10K)
(7)
JR
JIS Alignment Ring (20K)
JS(7)
JIS Alignment Ring (40K)
JB
Remote adapters
FE(7)
★
Flange Adapters 316 SST (1/2-in NPT)
High temperature application
HT(7)
Graphite Valve Packing (Tmax = 850 °F)
Flow calibration
WC(7)(9)
Flow Calibration, 3 Pt, Conditioning Orifice Option C (all pipe schedules)
WD(7)(9)
Flow Calibration, 10 Pt, Conditioning Option C (all schedules), Annubar Option A (Schedule 40)
Pressure testing
P1(7)
Hydrostatic Testing with Certificate
Special cleaning
P2(7)
Cleaning for Special Services
PA(7)
Cleaning per ASTM G93 Level D (Section 11.4)
Special inspection
QC1(7)
QC7
(7)
Visual & Dimensional Inspection with Certificate
★
Inspection and Performance Certificate
★
Transmitter calibration certification
Q4(7)
Calibration Certificate for Transmitter
★
Quality certification for safety
QS(7)(10)
Prior-use certificate of FMEDA data
★
QT(7)(10)
Safety Certified to IEC 61508 with certificate of FMEDA
★
Material traceability certification
Q8(7)
Material Traceability Certification per EN 10204:2004 3.1
★
Code conformance
J2(7)
ANSI/ASME B31.1
J3(7)
ANSI/ASME B31.3
J4(7)
ANSI/ASME B31.8
26
www.rosemount.com
September 2014
Rosemount 2051
Table 4. Rosemount 2051CFC Compact Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Materials conformance
J5(7)(11)
NACE MR-0175/ISO 15156
Country certification
J1(7)
Canadian Registration
Product certifications
E1(7)
ATEX Flameproof
★
E2(7)
INMETRO Flameproof
★
E3
China Flameproof
★
E5
FM Explosion-proof, Dust Ignition-proof
★
E6
CSA Explosion-proof, Dust Ignition-proof, Division 2
★
E7(7)
IECEx Flameproof
★
I1(7)
ATEX Intrinsic Safety
★
I2(7)
INMETRO Intrinsically Safe
★
I3(7)
China Intrinsic Safety
★
I5
FM Intrinsically Safe, Division 2
★
I6
CSA Intrinsically Safe
★
I7(7)
IECEx Intrinsic Safety
★
IA(7)(12)
ATEX FISCO Intrinsic Safety; for FOUNDATION fieldbus protocol only
★
IE(7)(12)
FM FISCO Intrinsically Safe
★
IF(7)(12)
CSA FISCO Intrinsically Safe
★
IG(7)(12)
IECEx FISCO Intrinsically Safe
★
K1(7)
ATEX Flameproof, Intrinsic Safety, Type n, Dust
★
K5
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E5 and I5)
★
K6
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E6 and I6)
★
K7(7)
IECEx Flameproof, Dust Ignition-proof, Intrinsic Safety, Type n (combination of E7, I7, and N7)
★
KA(7)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
★
KB
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E5, E6, I5, and
I6)
★
KC(7)
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
★
KD(7)
(7)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe (combination of E5, I5, E6, I6, E1, and I1)
★
(7)
ATEX Type n
★
(7)
N7
IECEx Type n
★
ND(7)
ATEX Dust
★
N1
Sensor fill fluid and O-ring options
L1(7)(13)
Inert Sensor Fill Fluid
★
L2(7)
Graphite-Filled (PTFE) O-ring
★
LA(7)(13)
Inert Sensor Fill Fluid and Graphite-Filled (PTFE) O-ring
★
www.rosemount.com
27
Rosemount 2051
September 2014
Table 4. Rosemount 2051CFC Compact Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Display and interface options
M4(7)(10)
(7)
M5
LCD Display with Local Operator Interface
★
LCD Display
★
Transient protection
T1(7)(13)(14)
★
Transient terminal block
Manifold for remote mount option
F2(7)
3-Valve Manifold, Stainless Steel
★
(7)
5-Valve Manifold, Stainless Steel
★
C4(7)(15)(16)
NAMUR Alarm and Saturation Levels, High Alarm
★
CN(7)(15)(16)
NAMUR Alarm and Saturation Levels, Low Alarm
★
CR(7)(15)
Custom Alarm and saturation signal levels, high alarm (requires C1 and Configuration Data Sheet)
★
CS(7)(15)
Custom Alarm and saturation signal levels, low alarm (requires C1 and Configuration Data Sheet)
★
CT(7)(15)
Low Alarm (standard Rosemount alarm and saturation levels)
★
F6
Alarm limit
PlantWeb control functionality
A01(7)(12)
★
FOUNDATION fieldbus Advanced Control Function Block Suite
Hardware adjustments
D4(7)(15)
Zero and Span Hardware Adjustments
★
DZ(7)(17)
Digital Zero Trim
★
Ground screw
V5(7)(13)(18)
★
External Ground Screw Assembly
HART revision configuration
HR5(7)(15)(19)
Configured for HART Revision 5
★
HR7(7)(15)(20)
Configured for HART Revision 7
★
Typical model number:
2051CFC D C S 060 N 065 0 3 2 A A 1 WC E5 M5
(1) Not available for Primary Element Technology C.
(2) For the 10-in. (250 mm) and 12-in. (300 mm) line size, the alignment ring must be ordered (Installation Accessories).
(3) 10-in. (250 mm) and 12-in. (300 mm) line sizes not available with Primary Element Technology A.
(4) For 2-in. (50 mm) line sizes the Primary Element Type is 0.6 for Primary Element Technology Code C.
(5) Available with Primary Element Technology A only.
(6) HART Revision 5 is the default HART output. The Rosemount 2051 with Selectable HART can be factory or field configured to HART Revision 7. To order HART
Revision 7 factory configured, add option code HR7.
(7) Not available with Low Power Output Code M.
(8) Only available with output code X.
28
www.rosemount.com
September 2014
Rosemount 2051
(9) Not available with Primary Element Technology P.
(10) Not available with FOUNDATION fieldbus (Output Code F) or Wireless (Output Code X).
(11) Materials of Construction comply with metallurgical requirements within NACE MR0175/ISO for sour oil field production environments. Environmental limits
apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.
(12) Only valid with FOUNDATION fieldbus Output Code F.
(13) Not available with output code X.
(14) Not available with Housing code 00, 5A, or 7J. The T1 option is not needed with FISCO Product Certifications, transient protection is included with the FISCO
Product Certification code IA.
(15) Only available with 4-20 mA HART (output codes A and M).
(16) NAMUR-Compliant operation is pre-set at the factory and cannot be changed to standard operation in the field.
(17) Only available with HART 4-20 mA (Output Codes A and M) and Wireless (Output Code X).
(18) The V5 option is not needed with the T1 option; external ground screw assembly is included with the T1 option.
(19) Configures the HART output to HART Revision 5. The device can be field configured to HART Revision 7 if needed.
(20) Configures the HART output to HART Revision 7. The device can be field configured to HART Revision 5 if 14 needed.
www.rosemount.com
29
Rosemount 2051
September 2014
Rosemount 2051CFP Integral Orifice Flowmeter
Additional information
Specifications: page 43
Certifications: page 53
Dimensional Drawings: page 61
Specification and selection of product materials, options, or components must be made by the purchaser of the equipment.
See page 51 for more information on Material Selection.
Table 5. Rosemount 2051CFP Integral Orifice Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Product description
2051CFP
Integral Orifice Flowmeter
Measurement type
Differential Pressure
★
316 SST
★
005
1
★
010
1-in. (25 mm)
★
015
11/2-in. (40 mm)
★
D
Material type
S
Line size
/2-in. (15 mm)
Process connection
T1
NPT Female Body (Not Available with Thermowell and RTD)
★
S1(1)
Socket Weld Body (Not Available with Thermowell and RTD)
★
P1
Pipe Ends: NPT Threaded
★
P2
Pipe ends: Beveled
★
D1
Pipe Ends: Flanged, DIN PN16, slip-on
★
D2
Pipe Ends: Flanged, DIN PN40, slip-on
★
D3
Pipe Ends: Flanged, DIN PN100, slip-on
★
W1
Pipe Ends: Flanged, RF, ANSI Class 150, weld-neck
★
W3
Pipe Ends: Flanged, RF, ANSI Class 300, weld-neck
★
W6
Pipe Ends: Flanged, RF, ANSI Class 600, weld-neck
★
Process connection
A1
Pipe Ends: Flanged, RF, ANSI Class 150, slip-on
A3
Pipe Ends: Flanged, RF, ANSI Class 300, slip-on
A6
Pipe Ends: Flanged, RF, ANSI Class 600, slip-on
R1
Pipe Ends: Flanged, RTJ, ANSI Class 150, slip-on
R3
Pipe Ends: Flanged, RTJ, ANSI Class 300, slip-on
R6
Pipe Ends: Flanged, RTJ, ANSI Class 600, slip-on
30
www.rosemount.com
September 2014
Rosemount 2051
Table 5. Rosemount 2051CFP Integral Orifice Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Orifice plate material
S
★
316 SST
Bore size option
0066
0109
0.066-in. (1.68 mm) for 1/2-in. Pipe
★
1
★
1
0.109-in. (2.77 mm) for /2-in. Pipe
0160
0.160-in. (4.06 mm) for /2-in. Pipe
★
0196
0.196-in. (4.98 mm) for 1/2-in. Pipe
★
0260
1
★
1
0.260-in. (6.60 mm) for /2-in. Pipe
0340
0.340-in. (8.64 mm) for /2-in. Pipe
★
0150
0.150-in. (3.81 mm) for 1-in. Pipe
★
0250
0.250-in. (6.35 mm) for 1-in. Pipe
★
0345
0.345-in. (8.76 mm) for 1-in. Pipe
★
0500
0.500-in. (12.70 mm) for 1-in. Pipe
★
0630
0.630-in. (16.00 mm) for 1-in. Pipe
★
0800
0.800-in. (20.32 mm) for 1-in. Pipe
★
0295
0.295-in. (7.49 mm) for 11/2-in. Pipe
★
0376
0.376-in. (9.55 mm) for 1 /2-in. Pipe
★
0512
0.512-in. (13.00 mm) for 11/2-in. Pipe
★
0748
0.748-in. (19.00 mm) for 11/22-in. Pipe
★
1
1022
1.022-in. (25.96 mm) for 1 /2-in. Pipe
★
1184
1.184-in. (30.07 mm) for 11/2-in. Pipe
★
0010
0.010-in. (0.25 mm) for 1/2-in. Pipe
0014
0.014-in. (0.36 mm) for 1/2-in. Pipe
0020
0.020-in. (0.51 mm) for 1/2-in. Pipe
0034
0.034-in. (0.86 mm) for 1/2-in. Pipe
1
Transmitter connection platform
D3
Direct-mount, 3-Valve Manifold, SST
★
D5
Direct-mount, 5-Valve Manifold, SST
★
R3
Remote-mount, 3-Valve Manifold, SST
★
R5
Remote-mount, 5-Valve Manifold, SST
★
Differential pressure ranges
1
0 to 25 in H2O (0 to 62,3 mbar)
★
2
0 to 250 in H2O (0 to 623 mbar)
★
3
0 to 1000 in H2O (0 to 2,5 bar)
★
Transmitter output
A(2)
4–20 mA with digital signal based on HART protocol
★
F
FOUNDATION fieldbus protocol
★
W
PROFIBUS PA Protocol
★
www.rosemount.com
31
Rosemount 2051
September 2014
Table 5. Rosemount 2051CFP Integral Orifice Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
★
X
Wireless
M
Low-Power, 1-5 Vdc with Digital Signal Based on HART Protocol
Transmitter housing material
Conduit entry size
A
Aluminum
1
/2-14 NPT
★
B
Aluminum
M20 x 1.5
★
J
SST
1
/2-14 NPT
★
K(3)
SST
M20 x 1.5
★
Engineered Polymer
No Conduit Entries
★
D
Aluminum
G1/2
M(3)
SST
G1/2
P
(4)
Transmitter performance class
1
★
up to ±2.25% flow rate accuracy, 5:1 flow turndown, 2-year stability
Wireless options (requires Wireless output code X and Engineered Polymer housing code P)
Wireless transmit rate, operating frequency and protocol
WA3
★
User Configurable Transmit Rate, 2.4GHz WirelessHART
Antenna and SmartPower
WP5
Internal Antenna, Compatible with Green Power Module (I.S. Power Module Sold Separately)
★
Options (include with selected model number)
Extended product warranty
WR3
3-year limited warranty
★
WR5
5-year limited warranty
★
Temperature sensor
RT(3)(5)
Thermowell and RTD
Optional connection
G1(3)
DIN 19213 Transmitter Connection
★
Pressure testing
P1(3)(6)
Hydrostatic Testing with Certificate
Special cleaning
P2(3)
Cleaning for Special Services
PA(3)
Cleaning per ASTM G93 Level D (Section 11.4)
Material testing
V1(3)
Dye Penetrant Exam
Material examination
V2(3)
32
Radiographic Examination
www.rosemount.com
September 2014
Rosemount 2051
Table 5. Rosemount 2051CFP Integral Orifice Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Flow calibration
WD(3)(7)
Discharge Coefficient Verification
Special inspection
QC1(3)
Visual & Dimensional Inspection with Certificate
★
QC7(3)
Inspection and Performance Certificate
★
Material traceability certification
Q8(3)
Material Traceability Certification per EN 10204:2004 3.1
★
Code conformance
J2(3)(8)
ANSI/ASME B31.1
J3(3)(8)
ANSI/ASME B31.3
J4(3)(8)
ANSI/ASME B31.8
Materials conformance
J5(3)(9)
NACE MR-0175 / ISO 15156
Country certification
J6(3)
European Pressure Directive (PED)
J1(3)
Canadian Registration
★
Transmitter calibration certification
Q4(3)
Calibration Certificate for Transmitter
★
Quality certification for safety
QS(3)(10)
Prior-use certificate of FMEDA data
★
QT(3)(13)
Safety Certified to IEC 61508 with certificate of FMEDA
★
Product certifications
E1(3)
ATEX Flameproof
★
E2(3)
INMETRO Flameproof
★
E3
China Flameproof
★
E5
FM Explosion-proof, Dust Ignition-proof
★
E6
CSA Explosion-proof, Dust Ignition-proof, Division 2
★
E7(3)
IECEx Flameproof
★
I1(3)
ATEX Intrinsic Safety
★
I2(3)
INMETRO Intrinsically Safe
★
I3(3)
China Intrinsic Safety
★
I5
FM Intrinsically Safe, Division 2
★
(3)
CSA Intrinsically Safe
★
(3)
IECEx Intrinsic Safety
★
(3)(11)
I6
I7
ATEX FISCO Intrinsic Safety; for FOUNDATION fieldbus protocol only
★
IE(3)(11)
FM FISCO Intrinsically Safe
★
IF(3)(11)
CSA FISCO Intrinsically Safe
★
IA
www.rosemount.com
33
Rosemount 2051
September 2014
Table 5. Rosemount 2051CFP Integral Orifice Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Product certifications
IG(3)(11)
K1
(3)(11)
K5
K6
(3)
IECEx FISCO Intrinsically Safe
★
ATEX Flameproof, Intrinsic Safety, Type n, Dust
★
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E5 and I5)
★
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E6 and I6)
★
IECEx Flameproof, Dust Ignition-proof, Intrinsic Safety, Type n (combination of E7, I7, and N7)
★
KA(3)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
★
KB
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 (combination of E5, E6, I5, and
I6)
★
KC(3)
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
★
KD(3)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe (combination of E5, I5, E6, I6, E1, and I1)
★
N1(3)
ATEX Type n
★
N7(3)
IECEx Type n
★
ND(3)
ATEX Dust
★
K7
Sensor fill fluid and O-ring options
L1(3)(12)
Inert Sensor Fill Fluid
★
L2(3)
Graphite-Filled (PTFE) O-ring
★
LA(3)(12)
Inert Sensor Fill Fluid and Graphite-Filled (PTFE) O-ring
★
Display and interface options
M4(3)(13)
LCD Display with Local Operator Interface
★
M5(3)
LCD Display
★
Transient protection
T1(3)(12)(13)
Transient terminal block
★
C4(3)(14)(15)
NAMUR Alarm and Saturation Levels, High Alarm
★
CN(3)(14)(15)
NAMUR Alarm and Saturation Levels, Low Alarm
★
CR(3)(14)
Alarm limit
Custom Alarm and saturation signal levels, high alarm (requires C1 and Configuration Data Sheet)
★
(3)(14)
Custom Alarm and saturation signal levels, low alarm (requires C1 and Configuration Data Sheet)
★
(3)(14)
Low Alarm (standard Rosemount alarm and saturation levels)
★
CS
CT
PlantWeb control functionality
A01(3)(11)
FOUNDATION fieldbus Advanced Control Function Block Suite
★
Hardware adjustments
D4(3)(14)
Zero and Span Hardware Adjustments
★
DZ(3)(16)
Digital Zero Trim
★
Ground screw
V5(3)(12)(17)
34
External Ground Screw Assembly
★
www.rosemount.com
September 2014
Rosemount 2051
Table 5. Rosemount 2051CFP Integral Orifice Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
HART revision configuration
HR5(3)(14)(18)
Configured for HART Revision 5
★
HR7(3)(14)(19)
Configured for HART Revision 7
★
Typical model number:
2051CFP D S 010 W1 S 0500 D3 2 A A 1 E5 M5
(1) To improve pipe perpendicularity for gasket sealing, socket diameter is smaller than standard pipe O.D.
(2) HART Revision 5 is the default HART output. The Rosemount 2051 with Selectable HART can be factory or field configured to HART Revision 7. To order HART
Revision 7 factory configured, add option code HR7.
(3) Not available with Low Power Output Code M.
(4) Only available with output code X.
(5) Thermowell Material is the same as the body material.
(6) Does not apply to Process Connection codes T1 and S1.
(7) Not available for bore sizes 0010, 0014, 0020, or 0034.
(8) Not available with DIN Process Connection codes D1, D2, or D3.
(9) Materials of Construction comply with metallurgical requirements within NACE MR0175/ISO for sour oil field production environments. Environmental limits
apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.
(10) Not available with FOUNDATION fieldbus (Output Code F) or Wireless (Output Code X).
(11) Only valid with FOUNDATION fieldbus Output Code F.
(12) Not available with output code X.
(13) Not available with Housing code 00, 5A, or 7J. The T1 option is not needed with FISCO Product Certifications, transient protection is included with the FISCO
Product Certification code IA.
(14) Only available with 4-20 mA HART (output codes A and M).
(15) NAMUR-Compliant operation is pre-set at the factory and cannot be changed to standard operation in the field.
(16) Only available with HART 4-20 mA (Output Codes A and M) and Wireless (Output Code X).
(17) The V5 option is not needed with the T1 option; external ground screw assembly is included with the T1 option.
(18) Configures the HART output to HART Revision 5. The device can be field configured to HART Revision 7 if needed.
(19) Configures the HART output to HART Revision 7. The device can be field configured to HART Revision 5 if needed.
www.rosemount.com
35
Rosemount 2051
September 2014
Rosemount 2051L Liquid Level Transmitter
Transmitter output code
Configuration
2051L Liquid Level
Transmitter
4-20 mA HART
2051
2051 with Selectable HART(1)
A
Lower Power
2051
2051 with Selectable HART(1)
M
FOUNDATION fieldbus
F
PROFIBUS
W
Wireless
X
(1) The 4-20mA with Selectable HART device can be ordered with Transmitter
Output option code A plus any of the following options codes: M4, QT, DZ,
CR, CS, CT, HR5, HR7.
Additional information
Specifications: page 43
Certifications: page 53
Dimensional Drawings: page 61
Table 6. Rosemount 2051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
Model
Transmitter type
2051L
Liquid Level Transmitter
★
Pressure range
2
–250 to 250 inH2O (–0,6 to 0,6 bar)
★
3
–1000 to 1000 inH2O (–2,5 to 2,5 bar)
★
4
–300 to 300 psi (–20,7 to 20,7 bar)
★
Transmitter output
A(1)
4–20 mA with Digital Signal Based on HART Protocol
★
F
FOUNDATION fieldbus Protocol
★
W
PROFIBUS PA Protocol
★
X
Wireless
★
M
Low-Power, 1–5 V dc with Digital Signal Based on HART Protocol
Process connection size, diaphragm material (high side)
Process connection size
Diaphragm
G(2)
2 in./DN 50
316L SST
★
H(2)
2 in./DN 50
Alloy C-276
★
J
2 in./DN 50
Tantalum
★
36
www.rosemount.com
September 2014
Rosemount 2051
Table 6. Rosemount 2051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
A(2)
3 in./DN 80
316L SST
★
B(2)
4 in./DN 100
316L SST
★
C(2)
3 in./DN 80
Alloy C-276
★
4 in./DN 100
Alloy C-276
★
E
3 in./DN 80
Tantalum
★
F
4 in./DN 100
Tantalum
★
D
(2)
Extension length (high side)
0
None, Flush Mount
★
2
2 in./50 mm
★
4
4 in./100 mm
★
6
6 in./150 mm
★
Mounting flange size, rating, material (high side)
Size
Rating
Material
M
2-in.
ANSI/ASME B16.5 Class 150
CS
★
A
3-in.
ANSI/ASME B16.5 Class 150
CS
★
B
4-in.
ANSI/ASME B16.5 Class 150
CS
★
N
2-in.
ANSI/ASME B16.5 Class 300
CS
★
C
3-in.
ANSI/ASME B16.5 Class 300
CS
★
D
4-in.
ANSI/ASME B16.5 Class 300
CS
★
X(2)
2-in.
ANSI/ASME B16.5 Class 150
SST
★
F(2)
3-in.
ANSI/ASME B16.5 Class 150
SST
★
G(2)
4-in.
ANSI/ASME B16.5 Class 150
SST
★
Y(2)
Displayed
ANSI/ASME B16.5 Class 300
SST
★
H(2)
3-in.
ANSI/ASME B16.5 Class 300
SST
★
J(2)
4-in.
ANSI/ASME B16.5 Class 300
SST
★
Q
DN50
PN 10-40 per EN 1092-1
CS
★
R
DN80
PN 40 per EN 1092-1
CS
★
K(2)
DN50
PN 10-40 per EN 1092-1
SST
★
T(2)
DN80
PN 40 per EN 1092-1
SST
★
Seal fill fluid (high side)
Specific gravity at
77°F (25 °C)
Temperature limits
(ambient temperature of
70 °F (21 °C))
A
SYLTHERM™ XLT
0.85
-102 to 293 °F (-75 to 145 °C)
★
C
Silicone 704
1.07
32 to 401 °F (0 to 205 °C)
★
D
Silicone 200
0.93
-49 to 401 °F (-45 to 205 °C)
★
www.rosemount.com
37
Rosemount 2051
September 2014
Table 6. Rosemount 2051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
F
Silicone 200 for Vacuum Applications Limits: For use in vacuum applications below 14.7 psia (1 bar-a), refer to
vapor pressure curves in Rosemount DP Level Fill Fluid Specification Technical Note (00840-2100-4016).
H
Inert (Halocarbon)
1.85
5 to 401 °F (-15 to 205 °C)
★
G
Glycerin and Water
1.13
-49 to 320 °F (-45 to 160 °C)
★
L
Silicone 704 for Vacuum Applications Limits: For use in vacuum applications below 14.7 psia (1 bar-a), refer to
vapor pressure curves in Rosemount DP Level Fill Fluid Specification Technical Note (00840-2100-4016).
N
Neobee® M-20
0.92
5 to 401 °F (-15 to 205 °C)
★
P
Propylene Glycol and Water
1.02
5 to 203 °F (-15 to 95 °C)
★
Sensor module configuration, flange adapter (low side)
Configuration
Flange adapter
1
Gage
SST
★
2
Differential
SST
★
3(3)
Tuned-System with Remote Seal
None
★
Sensor module diaphragm material, sensor fill fluid (low side)
Diaphragm material
Sensor fill fluid
1
316L SST
Silicone
★
2
Alloy C-276 (SST Valve Seat)
Silicone
★
7
Alloy C-276 (Alloy C-276 Valve Seat)
Silicone
★
A(4)
316L SST
Inert (Halocarbon)
★
B(2)(4)
Alloy C-276 (SST Valve Seat)
Inert (Halocarbon)
★
G(4)
Alloy C-276 (Alloy C-276 Valve Seat)
Inert (Halocarbon)
★
O-ring
A
★
Glass-filled PTFE
Housing material
Conduit entry size
A
Aluminum
½–14 NPT
★
B
Aluminum
M20 × 1.5
★
J
SST
½–14 NPT
★
K(5)
SST
M20 × 1.5
★
P(6)
Engineered Polymer
No Conduit Entries
★
Housing material
Conduit entry size
D
Aluminum
G½
M(5)
SST
G½
38
www.rosemount.com
September 2014
Rosemount 2051
Table 6. Rosemount 2051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
Wireless options (requires Wireless output code X and Engineered Polymer housing code P)
Wireless transmit rate, operating frequency and protocol
WA3
User Configurable Transmit Rate, 2.4GHz WirelessHART
★
Antenna and SmartPower
WP5
Internal Antenna, Compatible with Green Power Module (I.S. Power Module Sold Separately)
★
Options (include with selected model number)
Extended product warranty
WR3
3-year limited warranty
★
WR5
5-year limited warranty
★
PlantWeb control functionality
A01(7)
FOUNDATION fieldbus Advanced Control Function Block Suite
★
Seal assemblies
S1(8)
Assemble to One Rosemount 1199 Seal (requires 1199M)
★
Product certifications
E1(5)
ATEX Flameproof
★
E2(5)
INMETRO Flameproof
★
E3(5)
China Flameproof
★
E4
TIIS Flameproof
★
E5
FM Explosion-proof, Dust Ignition-proof
★
E6
CSA Explosion-proof, Dust Ignition-proof, Division 2
★
E7(5)
IECEx Flameproof
★
EW(5)
India (CCOE) Flameproof Approval
★
(5)
ATEX Intrinsic Safety
★
I2(5)
INMETRO Intrinsically Safe
★
I3(5)
China Intrinsic Safety
★
I4(5)(6)
TIIS Intrinsic Safety
★
I5
FM Intrinsically Safe, Division 2
★
I6
CSA Intrinsically Safe
★
I1
Product certifications
I7(5)
IECEx Intrinsic Safety
★
IA(7)
ATEX FISCO Intrinsic Safety
★
IE(7)
FM FISCO Intrinsically Safe
★
www.rosemount.com
39
Rosemount 2051
September 2014
Table 6. Rosemount 2051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
IF(7)
CSA FISCO Intrinsically Safe
★
IG(7)
IECEx FISCO Intrinsically Safe
★
IW(5)
India (CCOE) Intrinsically Safety Approval
★
ATEX Flameproof, Intrinsic Safety, Type n, Dust
★
K2
INMETRO Flameproof and Intrinsic Safety
★
K5
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
K1
(5)
K6
(5)
IECEx Flameproof, Intrinsic Safety, Type n and Dust
★
KA(5)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
★
KB
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
★
KC(5)
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
★
KD(5)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe
★
N1(5)
ATEX Type n
★
N7(5)
IECEx Type n
★
ND(5)
ATEX Dust
★
EM
Technical Regulations Customs Union (EAC) Flameproof
★
IM
Technical Regulations Customs Union (EAC) Intrinsic Safety
★
KM
Technical Regulations Customs Union (EAC) Flameproof and Intrinsic Safety
★
K7
Shipboard approvals
SBS(4)
American Bureau of Shipping (ABS) Type Approval
★
SBV(4)
Bureau Veritas (BV) Type Approval
★
SDN(4)
Det Norske Veritas (DNV) Type Approval
★
SLL(4)
Lloyds Register (LR) Type Approval
★
Display and interface options
M4(9)
LCD Display with Local Operator Interface
★
M5
LCD Display
★
Hardware adjustments
D4(10)
Zero and Span Configuration Buttons
★
DZ(11)
Digital Zero Trim
★
Flange adapters
DF(12)
1/2-14 NPT Flange Adapters
★
316 SST Conduit Plug
★
External Ground Screw Assembly
★
Conduit plug
DO(4)(13)
Ground screw
V5(4)(14)
40
www.rosemount.com
September 2014
Rosemount 2051
Table 6. Rosemount 2051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
Transient protection
T1(4)(15)
★
Transient Terminal Block
Software configuration
C1(11)
Custom Software Configuration (requires completed Configuration Data Sheet)
★
C4(10)(16)
NAMUR alarm and saturation levels, high alarm
★
CN(10)(16)
NAMUR alarm and saturation levels, low alarm
★
CR(10)
Custom Alarm and saturation signal levels, high alarm (requires C1 and Configuration Data Sheet)
★
CS(10)
Custom Alarm and saturation signal levels, low alarm (requires C1 and Configuration Data Sheet)
★
CT(10)
Low Alarm (standard Rosemount alarm and saturation levels)
★
Alarm limit
Calibration certification
Q4
Calibration Certificate
★
QG
Calibration Certificate and GOST Verification Certificate
★
GP
Calibration Certificate and tamper evident seal
★
Material traceability certification
Q8
★
Material Traceability Certification per EN 10204 3.1
Quality certification for safety
QS(17)
Prior-use certificate of FMEDA data
★
QT(17)
Safety Certified to IEC 61508 with certificate of FMEDA
★
Toolkit total system performance reports
QZ
★
Remote Seal System Performance Calculation Report
Conduit electrical connector
GE(4)
M12, 4-pin, Male Connector (eurofast)
★
GM(4)
A size Mini, 4-pin, Male Connector (minifast)
★
NACE certificate
Q15(18)
(18)
Q25
Certificate of Compliance to NACE MR0175/ISO 15156 for wetted materials
★
Certificate of Compliance to NACE MR0103 for wetted materials
★
Lower housing flushing connection options
Ring material
Number
Size (NPT)
F1
316 SST
1
1/4-18 NPT
★
F2
316 SST
2
1
★
F3(19)
Alloy C-276
1
1
/4-18 NPT
★
2
1/4-18 NPT
★
F4(19)
Alloy C-276
www.rosemount.com
/4-18 NPT
41
Rosemount 2051
September 2014
Table 6. Rosemount 2051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
F7
316 SST
1
1
★
F8
316 SST
2
1
★
F9
Alloy C-276
1
1
★
2
1
★
F0
Alloy C-276
Typical model number:
/2-14 NPT
/2-14 NPT
/2-14 NPT
/2-14 NPT
2051L 2 A A0 X D 21 A A B4 M5 F1
(1) HART Revision 5 is the default HART output. The Rosemount 2051 with Selectable HART can be factory or field configured to HART Revision 7. To order HART
Revision 7 factory configured, add option code HR7.
(2) Materials of Construction comply with metallurgical requirements highlighted within NACE MR0175/ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments. Order with Q15 or Q25 to receive a NACE certificate.
(3) Requires option code S1.
(4) Not available with output code X.
(5) Not available with Low Power output code M.
(6) Only available with output code X.
(7) Only valid with FOUNDATION fieldbus output code F.
(8) “Assemble-to” items are specified separately and require a completed model number.
(9) Not valid with FOUNDATION fieldbus output code F and Wireless Output Code X.
(10) Only available with 4-20 mA HART (output codes A and M).
(11) Only available with HART 4-20 mA output (output codes A) and Wireless output (output code X).
(12) Not available with Remote Mount Seal Assembly option S1.
(13) Transmitter is shipped with 316 SST conduit plug (uninstalled) in place of standard carbon steel conduit plug.
(14) The V5 option is not needed with the T1 option; external ground screw assembly is included with the T1 option.
(15) The T1 option is not needed with FISCO Product Certifications; transient protection is included in the FISCO product certification codes IA, IE, IF, and IG.
(16) NAMUR-Compliant operation is pre-set at the factory.
(17) Only available with HART 4-20 mA output (output code A).
(18) NACE Compliant wetted materials are identified by footnote (2).
(19) Not available with Option Codes A0, B0, and G0.
42
www.rosemount.com
September 2014
Rosemount 2051
Specifications
Performance specifications
This product data sheet covers HART, Wireless, FOUNDATION fieldbus, and PROFIBUS PA protocols unless specified.
Conformance to specification [±3σ (Sigma)]
Technology leadership, advanced manufacturing techniques, and statistical process control ensure specification conformance to at least ±3σ.
Reference accuracy
Stated reference accuracy equations include terminal based linearity, hysteresis, and repeatability. For Wireless, FOUNDATION fieldbus, and PROFIBUS
PA devices, use calibrated range in place of span.
Models
Standard
High performance option, P8
2051C
±0.10% of span
For spans less than 15:1, accuracy =
Range 1
URL
± 0.025 + 0.005  --------------- % of Span
 Span
±0.065% of span
For spans less than 10:1, accuracy =
Ranges 2-4
URL
± 0.025 + 0.005  --------------- % of Span
 Span
±0.075% of span
For spans less than 10:1, accuracy=
Range 5
URL
± 0.025 + 0.005  --------------- % of Span
 Span
N/A N/A
High Accuracy Option, P8
±0.05% of span
(1)
Ranges 2-4 For spans less than 10:1 , accuracy =
URL
± 0.015 + 0.005  --------------- % of Span
 Span
High Performance Option, P8
±0.065% of span
Range 5 For spans less than 10:1, accuracy=
URL
± 0.015 + 0.005  --------------- % of Span
 Span
±0.065% of span
For spans less than 10:1, accuracy =
2051T
Ranges 1-4
URL
± 0.0075  --------------- % of Span
 Span
Ranges 1-4
High Accuracy Option, P8
±0.05% of span
For spans less than 10:1(1), accuracy =
URL
± 0.0075  --------------- % of Span
 Span
±0.075% of span
For spans less than 10:1,
Range 5
URL
Span
accuracy = ± .0075  --------------- % of Span
±0.075% of span
For spans less than 10:1, accuracy =
2051L
Ranges 2-4
N/A N/A
N/A N/A
URL
± 0.025 + 0.005  --------------- % of Span
 Span
(1) For protocol cod F accuracy specification is for spans less than 7:1. Not available with output code W.
www.rosemount.com
43
Rosemount 2051
September 2014
Flow performance - flow reference accuracy
2051CFA Annubar Flowmeter
Ranges 2-3
±2.00% of Flow Rate at 5:1 flow turndown
2051CFC_A Compact Annubar Flowmeter - Annubar Option A
Ranges 2-3
Standard
±2.60% of Flow Rate at 5:1 flow turndown
Calibrated
±2.30% of Flow Rate at 5:1 flow turndown
2051CFC Compact Orifice Flowmeter – Conditioning Option C
Ranges 2-3
β =0.4
±2.25% of Flow Rate at 5:1 flow turndown
β =0.65
±2.45% of Flow Rate at 5:1 flow turndown
2051CFC Compact Orifice Flowmeter – orifice type option P(1)
Ranges 2-3
β =0.4
±2.50% of Flow Rate at 5:1 flow turndown
β =0.65
±2.50% of Flow Rate at 5:1 flow turndown
2051CFP Integral Orifice Flowmeter
Ranges 2-3
Bore <0.1
±3.10% of Flow Rate at 5:1 flow turndown
0.1< Bore <0.2
±2.75% of Flow Rate at 5:1 flow turndown
0.2< Bore <0.6
±2.25% of Flow Rate at 5:1 flow turndown
0.6< Bore <0.8
±3.00% of Flow Rate at 5:1 flow turndown
(1) For smaller line sizes, see Rosemount Compact Orifice
Long-term stability
± 50 °F (28 °C) temperature changes and up to 1000 psi (6,9 MPa) line pressure.
Models
Standard
High performance option, P8
2051C
Range 1 (CD) ±0.2% of URL for 1 year
Ranges 2-5 ±0.1% of URL for 3 years
±0.125% of URL for 5 years
Ranges 1-5 ±0.1% of URL for 3 years
±0.125% of URL for 5 years
2051T
Dynamic performance
4-20 mA HART(1)
1-5 Vdc HART Low
Power
FOUNDATION fieldbus
Typical HART transmitter response
and PROFIBUS PA
time
protocols (2)
115 ms
270 ms
130 ms
100 ms
See Instrument Toolkit™
152 ms
307 ms
152 ms
152 ms
See Instrument Toolkit
Dead time (Td)
60 ms (nominal)
97 ms
Update rate(4)
22 times per second
22 times per second
Total response time (Td + Tc)(3):
2051C, Range 3-5:
Range 1:
Range 2:
2051T:
2051L:
Transmitter Output vs. Time
Pressure Released
Td
100%
Tc
Td = Dead Time
Tc = Time Constant
Response Time = Td +Tc
63.2% of Total
Step Change
36.8%
0%
Time
(1) Dead time and update rate apply to all models and ranges; analog output only.
(2)
Transducer block response time, Analog Input block execution time not included.
(3) Nominal total response time at 75 °F (24 °C) reference conditions.
(4) Does not apply to wireless (Output Code X). See “Wireless (Output Code X)” on page Pressure- 48 for wireless update rate.
44
www.rosemount.com
September 2014
Rosemount 2051
Line pressure effect per 1000 psi (6,9 MPa)
For line pressures above 2000 psi (13,7 MPa) and Ranges 4-5, see user manual (document number 00809-0100-4001 for HART,
00809-0100-4102 for WirelessHART, 00809-0100-4774 for FOUNDATION fieldbus, and 00809-0300-4101 for PROFIBUS PA)
Models
Line pressure effect
2051CD, 2051CF
Zero Error(1)
Range 1
±0.25% of URL/1000 psi (68.9 bar)
Ranges 2-3
±0.05% of URL/1000 psi (68.9 bar) for line pressures from 0 to 2000 psi (0 to 13.7 MPa)
Span Error
Range 1
±0.4% of reading/1,000 psi (68.9 bar)
Ranges 2-3
±0.1% of reading/1,000 psi (68.9 bar)
(1) Can be calibrated out at line pressure.
Ambient temperature effect per 50 °F (28 °C)
Models
Ambient temperature effect
2051C, 2051CF
±(0.025% URL + 0.125% span) from 1:1 to 5:1
±(0.05% URL + 0.25% span) from 5:1 to 100:1
Range 1 ±(0.1% URL + 0.25% span) from 1:1 to 30:1
Ranges 2-5
2051T
±(0.05% URL + 0.25% span) from 1:1 to 30:1
±(0.07% URL + 0.25% span) from 30:1 to 100:1
±(0.05% URL + 0.25% span) from 1:1 to 10:1
Range 1
±(0.10% URL + 0.25% span) from 10:1 to 100:1
Range 5 ±(0.1% URL + 0.15% span)
Range 2-4
2051L
See Instrument Toolkit
Mounting position effects
Models
Mounting position effects
2051C
Zero shifts up to ±1.25 inH2O (3.1 mbar), which can be calibrated out. No span effect.
2051T
Zero shifts up to ±2.5 inH2O (6.2 mbar), which can be calibrated out. No span effect.
2051L
With liquid level diaphragm in vertical plane, zero shift of up to 1 inH2O (2.49 mbar). With diaphragm in
horizontal plane, zero shift of up to 5 inH2O (12.43 mbar) plus extension length on extended units. Zero
shifts can be calibrated out. No span effect.
Vibration effect
Less than ±0.1% of URL when tested per the requirements of IEC60770-1 field or pipeline with high vibration level (10-60 Hz 0.21mm
displacement peak amplitude / 60-2000 Hz 3g).
Transient protection (Option Code T1)
Power supply effect
Less than ±0.005% of calibrated span per volt.(1)
Meets IEEE C62.41, Category Location B
• 6 kV crest (0.5 μs - 100 kHz)
• 3 kA crest (8 × 20 microseconds)
• 6 kV crest (1.2 × 50 microseconds)
Electromagnetic compatibility (EMC)
Meets all relevant requirements of EN 61326 and
NAMUR NE-21.(2)
(1) Does not apply to Wireless (Output Code X).
(2) NAMUR NE-21 does not apply to wireless output code X.
www.rosemount.com
45
Rosemount 2051
September 2014
Functional specifications
Range and sensor limits
Table 7. Range and Sensor Limits
2051CD, 2051CF, 2051CG, 2051L
Range
Range and sensor limits
Lower (LRL)
Minimum span
1
2
3
4
5
Upper (URL) 2051C Differential
2051CF
Flowmeters
0.5 inH2O
(1.2 mbar)
2.5 inH2O
(6.2 mbar)
10 inH2O
(24.9 mbar)
3 psi
(0.207 bar)
20 psi
(1.38 bar)
25 inH2O
(62.3 mbar)
250 inH2O
(0.62 bar)
1000 inH2O
(2.49 bar)
300 psi
(20.7 bar)
2000 psi
(137.9 bar)
–25 inH2O
(–62.1 mbar)
–250 inH2O
(–0.62 bar)
-1000 inH2O
(-2.49 bar)
-300 psi
(-20,7 bar)
-2000 psi
(-137.9 bar)
2051C Gage(1)
–25 inH2O
(–62.1 mbar)
–250 inH2O
(–0.62 bar)
–393 inH2O
(–979 mbar)
–14.2 psig
(–979 mbar)
–14.2 psig
(–979 mbar)
2051L Differential
2051L Gage(1)
N/A
N/A
–250 inH2O
(–0.62 bar)
–1000 inH2O
(–2.49 bar)
–300 psi
(–20.7 bar)
–250 inH2O
(–0.62 bar)
–393 inH2O
(–979 mbar)
–14.2 psig
(–979 mbar)
N/A
N/A
(1) Assumes atmospheric pressure of 14.7 psig.
Table 8. Range and Sensor Limits
Range
2051T
Minimum
span
1
2
3
4
5
0.3 psi (20.7 mbar)
1.5 psi (0.103 bar)
8 psi (0.55 bar)
40 psi (2.76 bar)
2,000 psi (137.9 bar)
Range and sensor limits
Upper
(URL)
Lower
(LRL) (Abs)
Lower(1)
(LRL) (Gage)
30 psi (2.07 bar)
150 psi (10.3 bar)
800 psi (55.2 bar)
4000 psi (275.8 bar)
10,000 psi (689.5 bar)
0 psia (0 bar)
0 psia (0 bar)
0 psia (0 bar)
0 psia (0 bar)
0 psia (0 bar)
–14.7 psig (–1.01 bar)
–14.7 psig (–1.01 bar)
–14.7 psig (–1.01 bar)
–14.7 psig (–1.01 bar)
–14.7 psig (–1.01 bar)
(1) Assumes atmospheric pressure of 14.7 psig.
Service
Liquid, gas, and vapor applications
Protocols
4–20 mA HART (Output Code A)
Power supply
External power supply required. Standard transmitter
operates on 10.5 to 42.4 Vdc with no load.
46
www.rosemount.com
September 2014
Rosemount 2051
Load limitations
Maximum loop resistance is determined by the voltage level
of the external power supply, as described by:
Power supply
1387
External power supply required; transmitters operate on 9.0 to
32.0 Vdc transmitter terminal voltage for non-I.S. applications,
9.0 to 30 Vdc for entity model intrinsically safe applications and
9.0 to 17.5 Vdc for FISCO intrinsically safe applications.
1000
Current draw
Max. Loop Resistance = 43.5 (Power Supply Voltage – 10.5)
Load (Ωs)
FOUNDATION fieldbus (Output code F)
17.5 mA for all configurations (including LCD display option)
500
Operating
Region
Indication
Optional two line LCD display
0
10.5
20
30
Voltage (Vdc)
42.4(1)
Communication requires a minimum
loop resistance of 250 ohms.
(1) For CSA approval, power supply must not exceed 42.4
Indication
Optional two line LCD/LOI Display
Zero and span adjustment requirements
Zero and span values can be set anywhere within the range
limits stated in Table 7 and Table 8.
Span must be greater than or equal to the minimum span stated
in Table 7 and Table 8.
Output
Two-wire 4-20mA, user selectable for linear or square root
output. Digital process variable superimposed on 4-20 mA
signal, available to any host that conforms to HART protocol.
2051
Digital communications based on HART Revision 5 protocol.
2051 with selectable HART
The 2051 with Selectable HART comes with Selectable HART
Revisions. Digital communications based on HART Revision 5
(default) or Revision 7 (option code HR7) protocol can be
selected. The HART revision can be switched in the field using
any HART based configuration tool or the optional local operator
interface (LOI).
Local operator interface
The LOI utilizes a 2 button menu with internal and external
configuration buttons. Internal buttons are always configured
for Local Operator Interface. External Buttons can be configured
for either LOI, (option code M4), Analog Zero and Span (option
code D4) or Digital Zero Trim (option code DZ). See 2051 with
Selectable HART product manual (00809-0100-4107) for LOI
configuration menu.
www.rosemount.com
FOUNDATION fieldbus function block
Execution times
Block
Execution time
Resource
N/A
Transducer
N/A
LCD Display Block
N/A
Analog Input 1, 2
20 milliseconds
PID
25 milliseconds
Arithmetic
20 milliseconds
Input Selection
20 milliseconds
Signal Characterizer
20 milliseconds
Integrator
20 milliseconds
Output Splitter
20 milliseconds
Control Selector
20 milliseconds
FOUNDATION fieldbus parameters
Schedule Entries
7 (max.)
Links
25 (max.)
Virtual Communications Relationships
(VCR)
20 (max.)
Standard function blocks
Resource block
The Resource block contains diagnostic, hardware and
electronics information. There are no linkable inputs or
outputs to the Resource Block.
Sensor transducer block
The Sensor Transducer Block contains sensor information
including the sensor diagnostics and the ability to trim the
pressure sensor or recall factory calibration.
LCD display transducer block
The LCD Display Transducer Block is used to configure the
LCD display meter.
47
Rosemount 2051
Analog input block
The Analog Input (AI) Function Block processes the
measurements from the sensor and makes them available to
other function blocks. The output value from the AI block is
in engineering units and contains a status indicating the
quality of the measurement. The AI block is widely used for
scaling functionality.
Note
The channel, Set XD_Scale, Set L_Type, and sometimes Set Out_Scale
are typically configured by instrument personnel. Other AI block
parameters, block links, and schedule are typically configured by the
control systems configuration engineer.
Input selector block
The Input Selector (ISEL) Function Block can be used to
select the first good, Hot Backup, maximum, minimum, or
average of as many as eight input values and place it at the
output. The block supports signal status propagation.
Integrator block
The Integrator (INT) Function Block integrates one or two
variables over time. The block compares the integrated or
accumulated value to pre-trip and trip limits and generates
discrete output signals when the limits are reached.
The Integrator Block is used as a totalizer. This block will
accept up to two inputs, has six options how to totalize the
inputs, and two trip outputs.
Arithmetic block
The Arithmetic (ARTH) Function Block provides the ability to
configure a range extension function for a primary input. It
can also be used to compute nine different arithmetic
functions including flow with partial density compensation,
electronic remote seals, hydrostatic tank gauging, ratio
control and others.
Signal characterizer block
The Signal Characterizer (SGCR) Function Block
characterizes or approximates any function that defines an
input/output relationship. The function is defined by
configuring as many as twenty X,Y coordinates. The block
interpolates an output value for a given input value using the
curve defined by the configured coordinates. Two separate
analog input signals can be processed simultaneously to
give two corresponding separate output values using the
same defined curve.
PID block
The PID Function Block combines all of the necessary logic to
perform proportional/integral/derivative (PID) control. The
block supports mode control, signal scaling and limiting,
feed forward control, override tracking, alarm limit
detection, and signal status propagation.
Control selector block
The Control Selector Function Block selects one of two or
three inputs to be the output. The inputs are normally
connected to the outputs of PID or other function blocks.
One of the inputs would be considered Normal and the other
two overrides.
September 2014
Output splitter block
The Output Splitter Function Block provides the capability to
drive two control outputs from a single input. It takes the
output of one PID or other control block to control two
valves or other actuators.
Backup Link Active Scheduler (LAS)
The transmitter can function as a LAS if the current link master
device fails or is removed from the segment.
PROFIBUS PA (Output Code W)
Profile version
3.02
Power supply
External power supply required; transmitters operate on 9.0 to
32.0 Vdc transmitter terminal voltage for non-I.S. applications,
9.0 to 30 Vdc for entity model intrinsically safe applications and
9.0 to 17.5 Vdc for FISCO intrinsically safe applications.
Current draw
17.5 mA for all configurations (including LCD display option)
Output update rate
Four times per second
Standard function blocks
Analog Input (AI Block)
The AI function block processes the measurements and
makes them available to the host device. The output value
from the AI block is in engineering units and contains a
status indicating the quality of the measurement.
Physical block
The physical block defines the physical resources of the
device including type of memory, hardware, electronics, and
diagnostic information.
Transducer block
Contains actual sensor measurement data including the
sensor diagnostics and the ability to trim the pressure sensor
or recall factory defaults.
Indication
Optional two line LCD display.
LOI
Optional external configuration buttons.
Wireless (Output Code X)
Output
IEC 62591 (WirelessHART), 2.4 GHz DSSS
Wireless radio (internal antenna, WP5 option)
•Frequency: 2.400 - 2.485 GHz
•Channels: 15
•Modulation: IEEE 802.15.4 compliant DSSS
•Transmission: Maximum of 10 dBm EIRP
48
www.rosemount.com
September 2014
Local display
The optional 3-line, 7-digit LCD display can display
user-selectable information such as primary variable in
engineering units, scaled variable, percent of range, sensor
module temperature, and electronics temperature. The display
updates based on the wireless update rate.
Digital zero trim
Digital Zero trim (option DZ) is an offset adjustment to
compensate for mounting position effects, up to 5% of URL.
Update rate
User selectable 1 sec. to 60 min.
Wireless sensor module for in-line transmitters
The 2051 Wireless Transmitter requires the engineered polymer
housing to be selected. The standard sensor module will come
with aluminum material. If stainless steel is required, the option
WSM must be selected.
Power module
Field replaceable, keyed connection eliminates the risk of
incorrect installation, Intrinsically Safe Lithium-thionyl
chloride Power Module with PBT/PC enclosure. Ten-year life at
one minute update rate.(1)
Rosemount 2051
Power consumption
3.0 mA, 27–84 mW
Output load
100 kΩ or greater (meter input impedance)
Turn-on time
Performance within specifications less than 2.0 seconds
after power is applied to the transmitter.
Overpressure limits
Transmitters withstand the following limits without damage:
2051C, 2051CF
•Ranges 2–5: 3,626 psig (250 bar)
4,500 psig (310,3 bar) for option code P9
•Range 1: 2,000 psig (137,9 bar)
2051T
•Range 1: 750 psi (51,7 bar)
•Range 2: 1,500 psi (103,4 bar)
•Range 3: 1,600 psi (110,3 bar)
•Range 4: 6,000 psi (413,7 bar)
•Range 5: 15,000 psi (1034,2 bar)
2051L
Limit is flange rating or sensor rating, whichever is lower (Table 9
on page Pressure- 49).
Table 9. 2051L Flange Rating
(1) Reference conditions are 70 °F (21 °C), and routing data for three
additional network devices.
Note: Continuous exposure to ambient temperature limits of -40 °F to
185 °F (-40 °C to 85 °C) may reduce specified life by less than 20 percent.
HART 1-5 Vdc Low Power (Output Code M)
Output
Three wire 1–5 Vdc output, user-selectable for linear or
square root output. Digital process variable superimposed
on voltage signal, available to any host conforming to the
HART protocol.
2051
Digital communications based on HART Revision 5 protocol.
2051 with selectable HART
The 2051 with Selectable HART comes with Selectable HART
Revisions. Digital communications based on HART Revision
5 (default) or Revision 7 (option code HR7) protocol can be
selected. The HART revision can be switched in the field
using any HART based configuration tool or the optional
local operator interface (LOI).
LOI
The LOI utilizes a 2 button menu with internal and external
configuration buttons. Internal buttons are always
configured for Local Operator Interface. External Buttons can
be configured for either LOI, (option code M4), Analog Zero
and Span (option code D4) or Digital Zero Trim (option code
DZ). See 2051 with Selectable HART product manual
(00809-0100-4107) for LOI configuration menu.
Power supply
External power supply required. Standard transmitter
operates on 9 to 28 Vdc with no load.
www.rosemount.com
Standard
Type
CS rating SST rating
ANSI/ASME
Class 150
285 psig
275 psig
ANSI/ASME
Class 300
740 psig
720 psig
At 100 °F (38 °C), the rating decreases
with increasing temperature, per ANSI/ASME B16.5.
DIN
PN 10–40
40 bar
40 bar
DIN
PN 10/16
16 bar
16 bar
At 248 °F (120 °C), the rating decreases
with increasing temperature, per DIN 2401.
Static pressure limit
2051CD, 2051CF
•Operates within specifications between static line pressures of
-14.2 psig (0.034 bar) and 3,626 psig (250 bar)
•For Option Code P9, 4,500 psig (310,3 bar)
•Range 1: 0.5 psia to 2,000 psig (34 mbar and 137,9 bar)
Burst pressure limits
2051C, 2051CF Coplanar or traditional process flange
10,000 psig (689.5 bar)
2051T in-Line
•Ranges 1–4: 11,000 psi (758.4 bar)
•Range 5: 26,000 psi (1792.6 bar)
49
Rosemount 2051
September 2014
Temperature limits
Humidity limits
Ambient
0–100% relative humidity
–40 to 185 °F (–40 to 85 °C)
With LCD display(1)(2): –40 to 175 °F (–40 to 80 °C)
Volumetric displacement
Storage(1)
–50 to 230 °F (–46 to 110 °C)
With LCD display: –40 to 185 °F (–40 to 85 °C)
With Wireless Output: -40 °F to 185 °F (-40 °C to 85 °C)
(1) 2051 LCD display may not be readable and LCD display updates may
be slower at temperatures below -22 °F (-30 °C).
(2) Wireless LCD display may not be readable and LCD display updates
will be slower at temperatures below -4 °F (-20 °C).
Process
At atmospheric pressures and above. See Table 10.
Table 10. Process Temperature Limits
2051C, 2051CF
Silicone Fill Sensor(1)
with Coplanar Flange
–40 to 250 °F (–40 to 121 °C)(2)
with Traditional Flange
–40 to 300 °F (–40 to 149 °C)(2)(3)
with Level Flange
–40 to 300 °F (–40 to 149 °C)(2)
with 305 Integral
Manifold
–40 to 300 °F (–40 to 149 °C)(2)
Inert Fill Sensor(1)
–40 to 185 °F (–40 to 85 °C)(3)
2051T (process fill fluid)
Silicone Fill Sensor(1)
-40 to 250 °F (-40 to 121 °C)(2)
Inert Fill Sensor(1)
-22 to 250 °F (-30 to 121 °C)(2)
2051L low-side temperature limits
Silicone Fill Sensor(1)
Inert Fill Sensor(1)
–40 to 250 °F (–40 to 121 °C)(2)
-40 to 185 °F (-40 to 85 °C) (2)
2051L high-side temperature limits (process fill fluid)
SYLTHERM XLT
D.C. Silicone 704
–102 to 293 °F (–75 to 145°C)
®
32 to 401 °F (0 to 205 °C)
D.C. Silicone 200
–49 to 401 °F (–45 to 205 °C)
Inert
–49 to 320 °F (–45 to 160 °C)
Glycerin and Water
5 to 203 °F (–15 to 95 °C)
Neobee M-20
5 to 401 °F (–15 to 205 °C)
Propylene Glycol and
Water
5 to 203 °F (–15 to 95 °C)
(1) Process temperatures above 185 °F (85 °C) require derating the ambient
limits by a 1.5:1 ratio.
(2) 220 °F (104 °C) limit in vacuum service; 130 °F (54 °C) for pressures below
0.5 psia.
(3) 160 °F (71 °C) limit in vacuum service.
50
Less than 0.005 in3 (0.08 cm3)
Damping
4-20 mA HART
2051 with selectable HART
Analog output response to a step input change is
user-enterable from 0.0 to 60 seconds for one time
constant. This software damping is in addition to sensor
module response time.
2051
Analog output response to a step input change is
user-selectable from 0.4 to 60 seconds for one time
constant. This software damping is in addition to sensor
module response time.
FOUNDATION fieldbus
Transducer block: User configurable
AI Block: User configurable
PROFIBUS PA
AI Block only: User configurable
Failure mode alarm
HART 4-20 mA (Output Code A)
If self-diagnostics detect a sensor or microprocessor failure, the
analog signal is driven either high or low to alert the user. High or
low failure mode is user-selectable with a jumper on the
transmitter. The values to which the transmitter drives its
output in failure mode depend on whether it is
factory-configured to standard or NAMUR-compliant operation.
The values for each are as follows:
Standard operation
Output code
Linear
output
Fail high
A
3.9 ≤ I ≤ 20.8
I ≥ 21.75 mA I ≤ 3.75 mA
M
0.97 ≤ V ≤ 5.2
V ≥ 5.4 V
V ≤ 0.95 V
Fail low
NAMUR-compliant
operation
Output code
Linear
output
Fail high
Fail low
A
3.8 ≤ I ≤ 20.5
I ≥ 22.5 mA
I ≤ 3.6 mA
Output code F and X
If self-diagnostics detect a gross transmitter failure, that
information gets passed as a status along with the process
variable.
www.rosemount.com
September 2014
Physical specifications
Material selection
Emerson provides a variety of Rosemount product with various
product options and configurations including materials of
construction that can be expected to perform well in a wide
range of applications. The Rosemount product information
presented is intended as a guide for the purchaser to make an
appropriate selection for the application. It is the purchaser’s
sole responsibility to make a careful analysis of all process
parameters (such as all chemical components, temperature,
pressure, flow rate, abrasives, contaminants, etc.), when
specifying product, materials, options and components for the
particular application. Emerson Process Management is not in a
position to evaluate or guarantee the compatibility of the
process fluid or other process parameters with the product,
options, configuration or materials of construction selected.
Electrical connections
1
/2–14 NPT, G1/2, and M20 × 1.5 conduit.
Process connections
2051C
•1/4–18 NPT on 21/8-in. centers
•1/2–14 NPT and RC 1/2 on 2-in.(50,8 mm), 21/8-in. (54,0 mm), or
21/4-in. (57,2 mm) centers (process adapters)
2051T
•1/2–14 NPT female
•G1/2 A DIN 16288 Male (available in SST for Range 1–4
transmitters only)
•Autoclave type F-250-C (Pressure relieved 9/16–18 gland thread;
1/4 OD high pressure tube 60° cone; available in SST for Range 5
transmitters only)
2051L
Rosemount 2051
Process isolating diaphragms
316L SST, Alloy C-276, or Tantalum
2051T process wetted parts
Process connections
316L SST or Alloy C-276
Process Isolating diaphragms
316L SST or Alloy C-276
2051L Process wetted parts
Flanged process connection (transmitter high side)
Process diaphragms, Including process gasket surface
316L SST, Alloy C-276, or Tantalum
Extension
CF-3M (Cast version of 316L SST, material per ASTM-A743),
or Cast C-276. Fits schedule 40 and 80 pipe.
Mounting flange
Zinc-cobalt plated CS or SST
Reference process connection (transmitter low side)
Isolating diaphragms
316L SST or Alloy C-276
Reference flange and adapter
CF-8M (Cast version of 316 SST, material per ASTM-A743)
Non-wetted parts for 2051C/T/L
Electronics housing
Low-copper aluminum or CF-8M (Cast version of 316 SST).
Enclosure Type 4X, IP 65, IP 66, IP68
Housing Material Code P: PBT/PC with NEMA 4X and IP66/67/68
Paint for aluminum housing
Polyurethane
•High pressure side: 2-in.(50,8 mm), 3-in. (72 mm), or 4-in. (102
mm), ASME B 16.5 (ANSI) Class 150 or 300 flange;
50, 80, or 100 mm, DIN 2501 PN 40 or 10/16 flange
Coplanar sensor module housing
•Low pressure side: 1/4–18 NPT on flange, 1/2–14 NPT on process
Bolts
adapter
CF-3M (cast version of 316L SST)
•For 2051CFA wetted parts, see 00813-0100-4485 in the 485
section
ASTM A449, Type 1 (zinc-cobalt plated carbon steel)
ASTM F593G, Condition CW1 (Austenitic 316 SST)
ASTM A193, Grade B7M (zinc plated alloy steel)
Alloy K-500
•For 2051CFC wetted parts, see 00813-0100-4485 in the 405
section
Sensor module fill fluid
2051CF
•For 2051CFP wetted parts, see 00813-0100-4485 in the 1195
section
Silicone or inert halocarbon
In-Line series uses Fluorinert® FC-43
2051C process wetted parts
Process fill fluid (2051L only)
Drain/vent valves
316 SST or Alloy C-276
SYLTHERM XLT, D.C. Silicone 704,
D.C. Silicone 200, inert, glycerin and water, Neobee M-20, or
propylene glycol and water
Process flanges and adapters
Cover O-rings
Plated carbon steel, SST CF-8M (cast version of 316 SST, material
per ASTM-A743), or CW2M (cast version of Alloy C)
Buna-N
Silicone (for wireless option code X)
Wetted O-rings
Glass-filled PTFE or Graphite-filled PTFE
www.rosemount.com
51
Rosemount 2051
September 2014
Power module
Field replaceable, keyed connection eliminates the risk of
incorrect installation, Intrinsically Safe Lithium-thionyl chloride
Power Module with PBT enclosure.
Shipping weights
Table 11. Transmitter Weights without Options(1)
Table 13. Transmitter Options Weights
Code
Option
Add
lb (kg)
J, K, L, M
Stainless Steel Housing
3.9 (1,8)
M5
LCD Display for Aluminum Housing
0.5 (0,2)
Transmitter Standard 2051 In lb. (kg) Wireless In lb. (kg)
M5
LCD Display for Wireless Output
0.1 (0,04)
2051C
4.9 (2.2)
3.9 (1,8)
B4
SST Mounting Bracket for Coplanar Flange
1.0 (0,5)
2051L
See Table 12
See Table 12
B1 B2 B3
Mounting Bracket for Traditional Flange
2.3 (1,0)
2051T
3.1 (1.4)
1.9 (0,86)
B7 B8 B9
Mounting Bracket for Traditional Flange
2.3 (1,0)
BA, BC
SST Bracket for Traditional Flange
2.3 (1,0)
H2
Traditional Flange
2.6 (1,2)
H3
Traditional Flange
3.0 (1,4)
H4
Traditional Flange
3.0 (1,4)
H7
Traditional Flange
2.7 (1,2)
FC
Level Flange—3 in., 150
12.7 (5,8)
FD
Level Flange—3 in., 300
15.9 (7,2)
(1) Transmitter weights include the sensor module and housing only
(aluminum for standard 2051 and polymer for wireless).
Table 12. 2051L Weights without Options
Flange
Flush
lb. (kg)
2-in. Ext.
lb (kg)
4-in. Ext.
lb (kg)
6-in. Ext.
lb (kg)
2-in., 150
12.5 (5,7)
N/A
N/A
N/A
FA
Level Flange—2 in., 150
8.0 (3,6)
Level Flange—2 in., 300
8.4 (3,3)
3-in., 150
17.5 (7,9)
19.5 (8,8)
20.5 (9,3)
21.5 (9,7)
FB
4-in., 150
23.5 (10,7)
26.5 (12,0)
28.5 (12,9)
30.5 (13,8)
FP
DIN Level Flange, SST, DN 50, PN 40
7.8 (3,5)
2-in., 300
17.5 (7,9)
N/A
N/A
N/A
FQ
DIN Level Flange, SST, DN 80, PN 40
12.7 (5,8)
3-in., 300
22.5 (10,2)
24.5 (11,1)
25.5 (11,6)
26.5 (12,0)
WSM
SST Sensor Module
1.0 (0,45)
Power Module (701PGNKF)
0.4 (0,18)
4-in., 300
32.5 (14,7)
35.5 (16,1)
37.5 (17,0)
39.5 (17,9)
DN 50/PN 40
13.8 (6,2)
N/A
N/A
N/A
DN 80/PN 40
19.5 (8,8)
21.5 (9,7)
22.5 (10,2)
23.5 (10,6)
DN 100/PN
10/16
17.8 (8,1)
19.8 (9,0)
20.8 (9,5)
21.8 (9,9)
DN 100/PN 40
23.2 (10,5)
25.2 (11,5)
26.2 (11,9)
27.2 (12,3)
52
www.rosemount.com
September 2014
Rosemount 2051
Rosemount 2051 Product Certifications
European Directive Information
E6
A copy of the EC Declaration of Conformity can be found at the
end of the Quick Start Guide. The most recent revision of the EC
Declaration of Conformity can be found at
www.rosemount.com.
Ordinary Location Certification for Factory Mutual
As standard, the transmitter has been examined and tested to
determine that the design meets the basic electrical,
mechanical, and fire protection requirements by a nationally
recognized test laboratory (NRTL) as accredited by the Federal
Occupational Safety and Health Administration (OSHA).
Markings: Explosion-Proof for Class I, Divisions 1, Groups
B, C, and D. Dust-Ignition Proof for Class II and
Class III, Division 1, Groups E, F, and G. Suitable
for Class I, Division 2; Groups A, B, C, and D for
indoor and outdoor hazardous locations. Class I
Zone 1 Ex d IIC T5. Enclosure type 4X, factory
sealed. Single Seal.
North America
E5
I5
IE
FM Explosionproof (XP) and Dust-Ignitionproof (DIP)
Certificate: 3032938
Standards: FM Class 3600 – 2011, FM Class 3615 – 2006,
FM Class 3810 – 2005, ANSI/NEMA 250 –
1991. ANSI/IEC 60529 2004
Markings: XP CL I, DIV 1, GP B, C, D; DIP CL II, DIV 1, GP
E, F, G; CL III; T5(-50°C Ta +85°C);
Factory Sealed; Type 4X
FM Intrinsic Safety (IS) and Nonincendive (NI)
Certificate: 3033457
Standards: FM Class 3600 – 1998, FM Class 3610 – 2007,
FM Class 3611 – 2004, FM Class 3810 – 2005
Markings: IS CL I, DIV 1, GP A, B, C, D; CL II, DIV 1, GP E,
F, G; Class III; DIV 1 when connected per
Rosemount drawing 02051-1009; Class I,
Zone 0; AEx ia IIC T4; NI CL 1, DIV 2, GP A, B,
C, D; T4(-50°C Ta +70°C); Type 4x
CSA Explosion-Proof, Dust Ignition Proof
Certificate: 2041384
Standards: CAN/CSA C22.2 No. 0-10, CSA Std C22.2 No.
25-1966, CSA Std C22.2 No. 30-M1986,
CAN/CSA-C22.2 No. 94-M91, CSA Std C22.2
No.142-M1987, CAN/CSA-C22.2 No.157-92,
CSA Std C22.2 No. 213-M1987,
CAN/CSA-E60079-0:07,
CAN/CSA-E60079-1:07,
CAN/CSA-E60079-11-02, CAN/CSA-C22.2 No.
60529:05, ANSI/ISA-12.27.01–2003
I6
CSA Intrinsic Safety
Certificate: 2041384
Standards: CSA Std. C22.2 No. 142 - M1987, CSA Std.
C22.2 No. 213 - M1987, CSA Std. C22.2 No.
157 - 92, CSA Std. C22.2 No. 213 - M1987,
ANSI/ISA 12.27.01 – 2003,
CAN/CSA-E60079-0:07,
CAN/CSA-E60079-11:02
Markings: Intrinsically safe for Class I, Division 1, Groups
A,B, C, and D when connected in accordance
with Rosemount drawings 02051-1008.
Temperature code T3C. Class I Zone 1 Ex ia IIC
T3C. Single Seal. Enclosure Type 4X
FM FISCO
Certificate: 3033457
Standards: FM Class 3600 – 1998, FM Class 3610 – 2007,
FM Class 3611 – 2004, FM Class 3810 – 2005
Markings: IS CL I, DIV 1, GP A, B, C, D when connected per
Rosemount drawing 02051-1009
(-50 °C ≤ Ta ≤ +60 °C); Type 4x
www.rosemount.com
53
Rosemount 2051
September 2014
Europe
E1
Table 15. Input Parameters
ATEX Flameproof
Certificate: KEMA 08ATEX0090X
Standards: EN60079-0:2006, EN60079-1:2007,
EN60079-26:2007
Markings:
II 1/2 G Ex d IIC T6 IP66 (–50 °C ≤ Ta ≤ 65 °C);
II 1/2 G Ex d IIC T5 IP66 (–50 °C ≤ Ta ≤ 80 °C)
FISCO
Special Conditions for Safe Use (X):
1. The Ex d blanking elements, cable glands and wiring needs
to be suitable for a temperature of 90 °C.
2. This device contains a thin wall diaphragm. Installation,
maintenance and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer’s instructions for
maintenance shall be followed in detail to assure safety
during its expected lifetime.
3. In case of repair, contact the manufacturer for information
on the dimensions of the flameproof joints.
I1
Current li
380 mA
Power Pi
5.32 W
Capacitance Ci
0 μF
Inductance Li
0 mH
Special Conditions for Safe Use (X):
1. If the equipment is fitted with an optional 90V transient
suppressor, it is incapable of withstanding the 500V
isolation from earth test and this must be taken into
account during installation.
2. The enclosure may be made of aluminum alloy and given a
protective polyurethane paint finish; however care should
be taken to protect it from impact and abrasion when
located in Zone 0.
N1
Table 14. Input Parameters
Special Condition for Safe Use (X):
HART
Fieldbus/PROFIBUS
Voltage Ui
30 V
30 V
Current li
200 mA
300 mA
Power Pi
1.0 W
1.3 W
Capacitance Ci
0.012 μF
0 μF
Inductance Li
0 mH
0 mH
1. If the equipment is fitted with an optional 90V transient
suppressor, it is incapable of withstanding the 500V
isolation from earth test and this must be taken into
account during installation.
2. The enclosure may be made of aluminum alloy and given a
protective polyurethane paint finish; however care should
be taken to protect it from impact and abrasion when
located in Zone 0.
54
17.5 V
ATEX Intrinsic Safety
Certificate: Baseefa08ATEX0129X
Standards: EN60079-0:2012, EN60079-11:2012
Markings:
II 1 G Ex ia IIC T4 Ga (–60 °C ≤ Ta ≤ +70 °C)
Special Condition for Safe Use (X):
IA
Voltage Ui
ATEX Type n
Certification: Baseefa08ATEX0130X
Standards: EN60079-0:2012, EN60079-15:2010
Markings:
II 3G Ex nA IIC T4 Gc (-40°C Ta +70°C)
1. If the equipment is fitted with an optional 90V transient
suppressor, it is incapable of withstanding the 500V
electrical strength test as defined in clause 6.5.1 of by EN
60079-15:2010. This must be taken into account during
installation.
ND ATEX Dust
Certification: Baseefa08ATEX0182X
Standards: EN60079-0:2012, EN60079-31:2009
Markings:
II 1 D Ex ta IIIC T95°C T500 105°C
Da (-20°C ≤ Ta ≤ +85°C)
Special Condition for Safe Use (X):
If the equipment is fitted with an optional 90V transient
suppressor, it is incapable of withstanding the 500V
isolation from earth test and this must be taken into
account during installation.
ATEX FISCO
Certificate: Baseefa08ATEX0129X
Standards: EN60079-0:2012, EN60079-11:2012
Markings:
II 1 G Ex ia IIC T4 Ga (-60°C ≤ Ta ≤ +60°C)
www.rosemount.com
September 2014
Rosemount 2051
International
E7
Table 18. Input Parameters
IECEx Flameproof
Certificate: IECExKEM08.0024X
Standards: IEC60079-0:2004, IEC60079-1:2007-04,
IEC60079-26:2006
Markings: Ex d IIC T6/T5 IP66, T6(-50°C ≤ Ta ≤ +65°C),
T5(-50°C ≤ Ta ≤ +80°C)
FISCO
Table 16. Process Temperature
Temperature Class
Process Temperature
T6
-50 °C to +65 °C
T5
-50°C to +80°C
Special Conditions for Safe Use (X):
1. The device contains a thin wall diaphragm. Installation,
maintenance and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer’s instructions for
maintenance shall be followed in detail to assure safety
during its expected lifetime.
2. The Ex d blanking elements, cable glands, and wiring shall
be suitable for a temperature of 90°C
IECEx Intrinsic Safety
Certificate: IECExBAS08.0045X
Standards: IEC60079-0:2011, IEC60079-11:2011
Markings: Ex ia IIC T4 Ga (–60 °C ≤ Ta ≤ +70 °C)
17.5 V
Current li
380 mA
Power Pi
5.32 W
Capacitance Ci
0 μF
Inductance Li
0 mH
Special Condition for Safe Use (X):
1. If the equipment is fitted with an optional 90V transient
suppressor, it is incapable of withstanding the 500V
isolation from earth test and this must be taken into
account during installation.
2. The enclosure may be made of aluminum alloy and given a
protective polyurethane paint finish; however care should
be taken to protect it from impact and abrasion when
located in Zone 0.
N7
3. In case of repair, contact the manufacturer for information
on the dimensions of the flameproof joints.
I7
Voltage Ui
IECEx Type n
Certificate: IECExBAS08.0046X
Standards: IEC60079-0:2011, IEC60079-15:2010
Markings: Ex nA IIC T4 Gc (-40°C ≤ Ta ≤ +70°C)
Special Condition for Safe Use (X):
1. If fitted with a 90V transient suppressor, the equipment is
not capable of withstanding the 500V electrical strength
test as defined in clause 6.5.1 of IEC60079-15:2010. This
must be taken into account during installation.
Table 17. Input Parameters
HART
Fieldbus/PROFIBUS
Voltage Ui
30 V
30 V
Current li
200 mA
300 mA
Power Pi
1.0 W
1.3 W
Capacitance Ci
0.012 μF
0 μF
Inductance Li
0 mH
0 mH
Special Condition for Safe Use (X):
1. If the equipment is fitted with an optional 90V transient
suppressor, it is incapable of withstanding the 500V
isolation from earth test and this must be taken into
account during installation.
Brazil
E2
INMETRO Flameproof
Certificate: CEPEL 09.1767X, CEPEL 11.2065X, UL-BR
14.0375X
Standards: ABNT NBR IEC60079-0:2008, ABNT NBR
IEC60079-1:2009, ABNT NBR
IEC60079-26:2008, ABNT NBR IEC60529:2009,
ABNT NBR IEC60079-0:2008 + Errata 1:2011,
ABNT NBR IEC 60079-1:2009 + Errata 1:2011,
ABNT NBR IEC 60079-26:2008 + Errata 1:2009
Markings: Ex d IIC T6/T5 Ga/Gb IP66,
T6(-50°C ≤ Ta ≤ +65°C), T5(-50°C ≤ Ta ≤ +80°C)
2. The enclosure may be made of aluminum alloy and given a
protective polyurethane paint finish; however care should
be taken to protect it from impact and abrasion when
located in Zone 0.
IG
IECEx FISCO
Certificate: IECExBAS08.0045X
Standards: IEC60079-0:2011, IEC60079-11:2011
Markings: Ex ia IIC T4 Ga (-60°C ≤ Ta ≤ +60°C)
www.rosemount.com
55
Rosemount 2051
September 2014
Special Condition for Safe Use (X):
Special Condition for Safe Use (X):
1. The device contains a thin wall diaphragm. Installation,
maintenance and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer’s instructions for installation
and maintenance shall be followed in detail to assure
safety during its expected lifetime.
1. If the equipment is fitted with an optional 90V transient
suppressor, it is not capable of withstanding the 500V
insulation test required by ABNT NBR IRC 60079-11:2008.
This must be taken into account when installing the
equipment.
2. The Ex d blanking elements, cable glands, and wiring shall
be suitable for a temperature of 90°C
China
3. In case of repair, contact the manufacturer for information
on the dimensions of the flameproof joints.
E3
I2
INMETRO Intrinsic Safety
Certificate: CEPEL 09.1768X, CEPEL 11.2066X
Standards: ABNT NBR IEC60079-0:2008, ABNT NBR
IEC60079-11:2009, ABNT NBR IEC
60079-26: 2008, ABNT NBR IEC60529:2009
Markings: Ex ia IIC T4 Ga IP66W (-60°C ≤ Ta ≤ +70°C)
Table 19. Input Parameters
HART
Fieldbus/PROFIBUS
Voltage Ui
30 V
30 V
Current li
200 mA
300 mA
Power Pi
0.9 W
1.3 W
Capacitance Ci
0.012 μF
0 μF
Inductance Li
0 mH
0 mH
Special Condition for Safe Use (X):
1. If the equipment is fitted with an optional 90V transient
suppressor, it is not capable of withstanding the 500V
insulation test required by ABNT NBR IRC 60079-11:2008.
This must be taken into account when installing the
equipment.
IB
INMETRO FISCO
Certificate: CEPEL 09.1768X, CEPEL 11.2066X
Standards: ABNT NBR IEC60079-0:2008, ABNT NBR
IEC60079-11:2009, ABNT NBR IEC
60079-26: 2008, ABNT NBR IEC60529:2009
Markings: Ex ia IIC T4 Ga IP66W (-60°C ≤ Ta ≤ +60°C)
Table 20. Input Parameters
FISCO
56
China Flameproof
Certificate: GYJ13.1386X; GYJ101321X [Flowmeters]
Standards: GB3836.1-2000, GB3836.2-2000
Markings: Ex d IIC T6/T5, T6(-50°C ≤ Ta ≤ +65°C),
T5(-50°C ≤ Ta ≤ +80°C)
Special Condition for Safe Use (X):
1. Symbol “X” is used to denote specific conditions of use:

The Ex d blanking elements, cable glands, and wiring
shall be suitable for a temperature of 90°C

This device contains a thin wall diaphragm.
Installation, maintenance and use shall take into
account the environment conditions to which the
diaphragm will be subjected.
2. The relation between T code and ambient temperature
range is:
Ta
Temperature Class
-50 °C ≤ Ta ≤ +80 °C
T5
-50 °C ≤ Ta ≤ +65 °C
T6
3. The earth connection facility in the enclosure should be
connected reliably.
4. During installation, use and maintenance of the product,
observe the warning “Don’t open the cover when the
circuit is alive.”
5. During installation, there should be no mixture harmful to
flameproof housing
6. Cable entry and conduit, certified by NEPSI with type of
protection Ex d IIC and appropriate thread form, should be
applied when installed in a hazardous location. Blanking
elements should be used on the redundant cable entries.
7. End users are not permitted to change any internal
components, but to settle the problem in conjunction with
the manufacturer to avoid damage to the product.
Voltage Ui
17.5 V
Current li
380 mA
Power Pi
5.32 W
8. Maintenance should be done in a non-hazardous location.
Capacitance Ci
0 μF
Inductance Li
0 mH
9. During installation, use and maintenance of this product,
observe the following standards: GB3836.13-1997,
GB3836.15-2000, GB3836.16-2006, GB50257-1996
www.rosemount.com
September 2014
I3
Rosemount 2051
Note 2: [For Flowmeters] When 644 temperature
transmitter is used, the 644 temperature transmitter
should be used with Ex-certified associated apparatus to
establish explosion protection system that can be used in
explosive gas atmospheres. Wiring and terminals should
comply with the instruction manual of both 644
temperature transmitter and associated apparatus. The
cables between 644 temperatures transmitter and
associated apparatus should be shielded cables (the cables
must have insulated shield). The shielded cable has to be
grounded reliably in a non-hazardous area.
China Intrinsic Safety
Certificate: GYJ12.1295X; GYJ101320X [Flowmeters]
Standards: GB3836.1-2010, GB3836.4-2010,
GB3836.20-2010
Markings: Ex ia IIC T4 Ga
1. Symbol “X” is used to denote specific conditions of use:
a. If the apparatus is fitted with an optional 90V transient
suppressor, it is not capable of withstanding the 500V
insulation test for 1 minute. This must be taken into
account when installing the apparatus.
b. The enclosure may be made of aluminum alloy and
given a protective polyurethane paint finish; however, care
should be taken to protect it from impact or abrasion if
located in Zone 0.
2. The relation between T code and ambient temperature
range is:
Model
T Code Temperature Range
HART, Fieldbus,
T4
Profibus, and Low Power
-60°C ≤ Ta ≤ +70°C
FISCO
T4
-60°C ≤ Ta ≤ +60°C
Flowmeter with 644
Temp Housing
T4
-40°C ≤ Ta ≤ +60°C
3. Intrinsically Safe parameters:
HART
Fieldbus/
PROFIBUS
FISCO
Voltage Ui
30 V
30 V
17.5 V
Current li
200 mA
300 mA
380 mA
Power Pi
1W
1.3 W
5.32 W
Capacitance Ci
0.012 μF
0 μF
0 nF
Inductance Li
0 mH
0 mH
0 μF
Note 1: FISCO parameters comply with the requirements
for FISCO field devices in GB3836.19-2010
www.rosemount.com
4. The product should be used with Ex-certified associated
apparatus to establish explosion protection system that
can be used in explosive gas atmospheres. Wiring and
terminals should comply with the instruction manual of
the product and associated apparatus.
5. The cables between this product and associated apparatus
should be shielded cables (the cables must have insulated
shield). The shielded cable has to be grounded reliably in a
non-hazardous area.
6. End users are not permitted to change any internal
components, and needs to settle the problem in
conjunction with the manufacturer to avoid damage to the
product.
7. During installation, use and maintenance of this product,
observe the following standards: GB3836.13-1997,
GB3836.15-2000, GB3836.16-2006, GB50257-1996
Japan
E4
Japan Flameproof
Certificate: TC20598, TC20599, TC20602, TC20603
[HART]; TC20600, TC20601, TC20604,
TC20605 [Fieldbus]
Markings: Ex d IIC T5
Combinations
K1
Combination of E1, I1, N1, and ND
K2
Combination of E2 and I2
K5
Combination of E5 and I5
K6
Combination of E6 and I6
K7
Combination of E7, I7, and N7
KB
Combination of K5 and K6
KD
Combination of K1, K5, and K6
57
Rosemount 2051
September 2014
Additional Certifications
SBS American Bureau of Shipping (ABS) Type Approval
Certificate: 09-HS446883B-3-PDA
Intended Use: Marine & Offshore Applications
Measurement of either Gauge or Absolute
Pressure for Liquid, Gas, and Vapor.
ABS Rules: 2013 Steel Vessels Rules 1-1-4/7.7,
1-1-Appendix 3, 4-8-3/1.7, 4-8-3/13.1
SBV Bureau Veritas (BV) Type Approval
Certificate: 23157/A2 BV
BV Rules:
Bureau Veritas Rules for the Classification of
Steel Ships
Application: Class notations: AUT-UMS, AUT-CCS,
AUT-PORT and AUT-IMS; Pressure
transmitter type 2051 cannot be installed on
diesel engines
SDN Det Norske Veritas (DNV) Type Approval
Certificate: A-13245
Intended Use: Det Norske Veritas’ Rules for Classification of
Ships, High Speed & Light Craft Det Norske Veritas’
Offshore Standards
Application:
Locations Classes
Type
2051
Temperature
D
Humidity
B
Vibration
A
EMC
B
Enclosure
D
SLL Lloyds Register (LR) Type Approval
Certificate: 11/60002
Application: Environmental categories ENV1, ENV2, ENV3
and ENV5
58
www.rosemount.com
September 2014
Rosemount 2051
Rosemount 2051 Wireless Product Certifications
European Directive Information
A copy of the EC Declaration of Conformity can be found at the
end of the Quick Start Guide. The most recent revision of the EC
Declaration of Conformity can be found at
www.rosemount.com.
USA
I5
Telecommunication Compliance
All wireless devices require certification to ensure that they
adhere to regulations regarding the use of the RF spectrum.
Nearly every country requires this type of product certification.
Emerson is working with governmental agencies around the
world to supply fully compliant products and remove the risk of
violating country directives or laws governing wireless device
usage.
FM Intrinsic Safety (IS)
Certificate: 3046325
Standards: FM Class 3600 - 2011, FM Class 3610 - 2010, FM
Class 3810 - 2005, ANSI/ISA 60079-0 - 2009,
ANSI/ISA 60079-11 - 2009, NEMA 250 - 2003,
ANSI/IEC 60529
Markings: IS CL I, DIV 1, GP A, B, C, D T4;
CL 1, Zone 0 AEx ia IIC T4;
T4(-40 °C ≤ Ta ≤ +70 °C) when installed per
Rosemount drawing 03031-1062;
Type 4X/IP66/IP68
Specific Conditions for Safe Use (X):
1. The Model 2051 Wireless Pressure Transmitter shall only
be used with the 701PGNKF Rosemount Smartpower
Battery Pack.
FCC and IC
2. The inline pressure sensor may contain more than 10%
aluminum and is considered a potential risk of ignition by
impact or friction. Care must be taken into account during
installation and used to prevent impact and friction.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following conditions: This device may not cause
harmful interference. This device must accept any interference
received, including interference that may cause undesired
operation. This device must be installed to ensure a minimum
antenna separation distance of 20 cm from all persons.
3. The surface resistivity of the transmitter housing is greater
than one gigaohm. To avoid electrostatic charge build-up,
it must not be rubbed or cleaned with solvents or a dry
cloth.
Ordinary Location Certification for FM
As standard, the transmitter has been examined and tested to
determine that the design meets the basic electrical,
mechanical, and fire protection requirements by FM Approvals,
a nationally recognized test laboratory (NRTL) as accredited by
the Federal Occupational Safety and Health Administration
(OSHA).
Installing in North America
The US National Electrical Code (NEC) and the Canadian
Electrical Code (CEC) permit the use of Division marked
equipment in Zones and Zone marked equipment in Divisions.
The markings must be suitable for the area classification, gas,
and temperature class. This information is clearly defined in the
respective codes.
www.rosemount.com
Canada
I6
CSA Intrinsically Safe
Certificate: 2526009
Standards: CAN/CSA C22.2 No. 0-M91, CAN/CSA C22.2
No. 94-M91, CSA Std C22.2 No. 142-M1987,
CSA Std C22.2 No. 157-92, CSA Std C22.2 No.
60529:05
Markings: Intrinsically Safe for Class I, Division 1, Groups
A, B, C, D, T4 when installed per Rosemount
drawing 03031-1063; Type 4X/IP66/IP68
59
Rosemount 2051
September 2014
Europe
China
I1
I3
ATEX Intrinsic Safety
Certificate: Baseefa12ATEX0228X
Standards: EN 60079-0: 2012, EN 60079-11: 2012
Markings:
II 1 G Ex ia IIC T4 Ga, T4(-40 °C ≤ Ta ≤ +70 °C)
IP66/IP68
Specific Conditions for Safe Use (X):
Specific Conditions for Safe Use (X):
See certificate for special conditions.
1. The plastic enclosure may constitute a potential
electrostatic ignition risk and must not be rubbed or
cleaned with a dry cloth.
2. The Model 701PGNKF Power Module may be replaced in a
hazardous area. The power module has a surface resistivity
greater than 1G? and must be properly installed in the
wireless device enclosure. Care must be taken during
transportation to and from the point of installation to
prevent electrostatic charge build-up.
China Intrinsic Safety
Certificate: GYJ12.1295X
Standards: GB3836.1-2010, GB3836.4-2010,
GB3836.20-2010
Markings: Ex ia IIC Ga T4, -40 ~ +70°C
Certificate: GYJ101320X [Flowmeters]
Standards: GB3836.1-2000, GB3836.4-2000
Markings: Ex ia IIC T4
Specific Conditions for Safe Use (X):
See certificate for special conditions.
International
EAC – Belarus, Kazakhstan, Russia
I7
IM
IECEx Intrinsic Safety
Certificate: IECEx BAS 12.0124X
Standards: IEC 60079-0: 2011, IEC 60079-11: 2011
Markings: Ex ia IIC T4 Ga, T4(-40 °C ≤ Ta ≤ +70 °C)
IP66/IP68
Technical Regulation Customs Union (EAC) Intrinsic Safety
Certificate: Contact an Emerson Process Management
representative for additional information.
Specific Conditions for Safe Use (X):
1. The plastic enclosure may constitute a potential
electrostatic ignition risk and must not be rubbed or
cleaned with a dry cloth.
2. The Model 701PGNKF Power Module may be replaced in a
hazardous area. The power module has a surface resistivity
greater than 1G? and must be properly installed in the
wireless device enclosure. Care must be taken during
transportation to and from the point of installation to
prevent electrostatic charge build-up.
Brazil
I2
INMETRO Intrinsic Safety
Certificate: UL-BR 13.0534X
Standards: ABNT NBR IEC60079-0:2008, ABNT NBR
IEC60079-11:2009
Markings: Ex ia IIC T4 IP66 Ga, T4(-40°C ≤ Ta ≤ +70°C)
Specific Conditions for Safe Use (X):
See certificate for special conditions.
60
www.rosemount.com
September 2014
Rosemount 2051
Dimensional Drawings
2051C Exploded View
F
E
D
C
B
A
G
H
I
P
J
O
K
L
N
M
A. Cover
B. Cover O-Ring
C. Terminal Block
D. Electronics Housing
E. Local Configuration Buttons(1)
F. Nameplate
G. Electronics Board
H. Housing Rotation Set Screw (180° Maximum Housing Rotation without
Further Disassembly)
(1)
I. Sensor Module
J. Process O-Ring
K. Flange Adapter O-Ring
L. Flange Alignment Screw (Not Pressure Retaining)
M. Flange Bolts
N. Flange Adapters
O. Drain/Vent Valve
P. Coplanar Flange
Span and Zero Adjustment Buttons are optional with 4-20 mA and 1-5 Vdc HART protocol. Local Operator Interface buttons are optional for PROFIBUS PA
protocol. Local Configuration Buttons are not available with Foundation fieldbus.
www.rosemount.com
61
Rosemount 2051
September 2014
2051C Coplanar Flange
5.66 (144)
5.20 (132)
4.36 (111)
3.85 (98)
7.04 (179)
A
B
D
C
6.53 (166)
2051 Wireless Housing with Coplanar Platform
A. Fieldbus Display Cover
B. HART Display Cover
C. Transmitter Circuitry
D. Terminal Connections
62
www.rosemount.com
September 2014
Rosemount 2051
2051C Coplanar Flange
2051C Coplanar with Rosemount 305 3-Valve Coplanar Integral Manifold
5.66 (144)
5.20 (132)
4.36 (111)
3.85 (98)
C
6.19
(157)
B
D
7.44
(189)
E
A
9.20 (234)
Max Open
5.00 (127)
Max Open
Dimensions are in inches (millimeters).
A. Drain/Vent Valve
B. Terminal Connections
C. Fieldbus Display Cover
D. HART Display Cover
E. Transmitter Circuitry
www.rosemount.com
63
Rosemount 2051
September 2014
Coplanar Flange Mounting Configurations with
Optional Bracket (B4) for 2-in. Pipe or Panel Mounting
2.82
(72)
4.36
(111)
2.18
(55)
B
PANEL MOUNTING
2.8 (71)
7.03
(178)
A
6.15
(156)
2.81
3.4 (85)
4.73
(120)
PIPE MOUNTING
C
6.25
(159)
A. 3/8–16 × 11/4 Bolts for Mounting to Transmitter
B. 5/16 × 11/2 Bolts for Panel Mounting (Not Supplied)
C. 2-in. U-Bolt for Pipe Mounting
64
3.51
(89)
Dimensions are in inches (millimeters).
www.rosemount.com
September 2014
Rosemount 2051
2051C Coplanar with Traditional Flange
5.66 (144)
5.20 (132)
4.36 (111)
3.85 (98)
D
C
E
7.76
(197)
F
A
B
1.626
(41,3)
1.10 (28)
3.40 (86)
2.13
(54)
1.16 (29)
2051C Coplanar with Rosemount 305 3-Valve Traditional Integral Manifold
5.66 (144)
5.20 (132)
4.36 (111)
3.85 (98)
D
E
6.19
(157)
G
C
F
B
1.626
3.75 (95)
Max Open
1.05
(27)
A. 1/2 - 14 NPT Flange Adapter (optional)
B. Drain/Vent Valve
C. Terminal Connections
D. Fieldbus Display Cover
www.rosemount.com
3.50
(89)
2.126
(54)
1.10
(28)
6.20 (158)
Max Open
8.90 (226)
Max Open
2.70 (69)
Max Open
Dimensions are in inches (millimeters).
E. HART Display Cover
F. Transmitter Circuitry
G. 1/2 - 14 NPT Flange Adapter (optional)
65
Rosemount 2051
September 2014
Traditional Flange Mounting Configurations with
Optional Brackets for 2-in. Pipe or Panel Mounting
Panel Mount (Bracket Option B2/B8)
Pipe Mount (Bracket Option B3/B9/BC)
9.18 (233)
2.62
(67)
6.19
(157)
1.94
(49)
11.51
(292)
3.56 (90)
Max Open
4.85
(123)
5.32
(135)
3.50
(89)
1.10
(28)
6.19 (157)
Pipe Mount (Bracket Option B1/ B7/BA)
6.76 (172)
3.56 (90)
MAX OPEN
1.10 (28)
3.50 (89)
2.62 (67)
0.93
(24)
Dimensions are in inches (millimeters).
66
www.rosemount.com
September 2014
Rosemount 2051
2051T Dimensional Drawings
5.66 (144)
5.20 (132)
4.36 (111)
3.85 (98)
A
B
7.19 (182.7)
D
C
2051 Wireless Housing with In-Line Platform
4.20
(106.6)
5.49
(139.3)
7.56
(192.1)
E
F
A. Fieldbus Display Cover
B. HART Display Cover
C. Transmitter Circuitry
D. Terminal Connections
E. U-Bolt Bracket
F. 1/2-14 NPT Female or G1/2 A DIN 16288 Make Process Connection
www.rosemount.com
67
Rosemount 2051
September 2014
2051T Dimensional Drawings
2051T with Rosemount 306 2-Valve Integral Manifold
5.66 (144)
5.20 (132)
4.36 (111)
3.85 (98)
A
7.19
(182.7)
B
D
C
4.85
(123)
4.40
(112)
6.25 (159)
Max Open
Dimensions are in inches (millimeters).
A. Fieldbus Display Cover
B. HART Display Cover
C. Transmitter Circuitry
D. Terminal Connections
68
www.rosemount.com
September 2014
Rosemount 2051
2051T Typical Mounting Configurations with Optional Mounting Bracket
Pipe mounting
Panel mounting
3.85
(98)
5.16 (131)
1.99 (51)
2.81 (71)
6.21
(158)
3.49
(89)
4.72
(120)
6.90
(175)
Dimensions are in inches (millimeters).
www.rosemount.com
69
Rosemount 2051
September 2014
Rosemount 2051CFA Pak-Lok Annubar Flowmeter(1)
Front view
Side view
Top view
D
B
C
A
(1) The Pak-Lok Annubar model is available up to 600# ANSI [1,440 psig at 100 °F (99 bar at 38 °C)].
Table 21. 2051CFA Pak-Lok Annubar Flowmeter Dimensional Data
Sensor size
A (Max)
B (Max)
C (Max)
D (Max)
1
8.50 (215.9)
14.55 (369.6)
9.00 (228.6)
6.00 (152.4)
2
11.00 (279.4)
16.30 (414.0)
9.00 (228.6)
6.00 (152.4)
3
12.00 (304.8)
19.05 (483.9)
9.00 (228.6)
6.00 (152.4)
Dimensions are in inches (millimeters).
70
www.rosemount.com
September 2014
Rosemount 2051
Rosemount 2051CFC Compact Orifice Flowmeter
Compact Orifice Plate
Orifice plate front view
Orifice plate top view
(Primary Element Type code P)
Orifice plate side view
Conditioning Orifice Plate
(Primary Element Type code C)
1.125 (28.58)
1.125 (28.58)
Table 22. 2051CFC Dimensional Drawings
Primary
element
type
Type P and C
A
B
Transmitter
height
C
D
5.62 (143)
Transmitter Height + A
6.27 (159)
7.75 (197) - closed
8.25 (210) - open
6.00 (152) - closed
6.25 (159) - open
Dimensions are in inches (millimeters).
www.rosemount.com
71
Rosemount 2051
September 2014
Rosemount 2051CFP Integral Orifice Flowmeter
Side view
Bottom view
Front view
10.2
[258.28]
6.2
[156.51]
8.8 [223.46]
5.3
[134.51]
Dimensions are in inches (millimeters).
Table 23. 2051CFP Dimensional Drawings
Line size
/2-in. (15 mm)
1-in. (25 mm)
11/2-in. (40 mm)
J (Beveled/Threaded pipe ends)
12.54 (318.4)
20.24 (514.0)
28.44 (722.4)
J (RF slip-on, RTJ slip-on, RF-DIN slip on)
12.62 (320.4)
20.32 (516.0)
28.52 (724.4)
J (RF 150#, weld neck)
14.37 (364.9)
22.37 (568.1)
30.82 (782.9)
J (RF 300#, weld neck)
14.56 (369.8)
22.63 (574.7)
31.06 (789.0)
J (RF 600#, weld neck)
14.81 (376.0)
22.88 (581.0)
31.38 (797.1)
K (Beveled/Threaded pipe ends)
5.74 (145.7)
8.75 (222.2)
11.91 (302.6)
K (RF slip-on, RTJ slip-on, RF-DIN slip on)(1)
5.82 (147.8)
8.83 (224.2)
11.99 (304.6)
K (RF 150#, weld neck)
7.57 (192.3)
10.88 (276.3)
14.29 (363.1)
K (RF 300#, weld neck)
7.76 (197.1)
11.14 (282.9)
14.53 (369.2)
K (RF 600#, weld neck)
8.01 (203.4)
11.39 (289.2)
14.85 (377.2)
B.D. (Bore Diameter)
0.664 (16.87)
1.097 (27.86)
1.567 (39.80)
Dimension
1
Dimensions are in inches (millimeters).
(1) Downstream length shown here includes plate thickness of 0.162-in. (4.11 mm).
72
www.rosemount.com
September 2014
Rosemount 2051
2051L Liquid Level
2-in. flange configuration
(flush mount only)
3- and 4-in. flange configuration
3.85
(98)
3.85
(98)
E
D
A
2-in., 4-in., or 6-in.
Extension
(50.8, 101.6, 152.4)
A
H
Optional flushing connection ring
(lower housing)
5.66 (144)
5.20 (132)
4.36 (111)
G
Terminal
Connections
F
E
H
Fieldbus
Display
Cover
HART
Display
Cover
6.60
(68)
7.02
(178)
8.12
(206)
Flushing Connection
Diaphragm assembly and
mounting flange
Transmitter
Circuitry
B
C
Dimensions are in inches (millimeters).
www.rosemount.com
73
Rosemount 2051
September 2014
Table 24. 2051L Dimensional Specifications
Pipe
size
Class(1)
ASME B16.5 (ANSI) 150
ASME B16.5 (ANSI) 300
DIN 2501 PN 10–40
DIN 2501 PN 25/40
Outside
Extension
Flange
Bolt circle
No. of Bolt hole
diameter
diameter(1)
thickness A diameter B
bolts diameter
C
D
O.D.
gasket
surface E
2 (51)
0.69 (18)
4.75 (121)
6.0 (152)
4
0.75 (19)
N/A
3.6 (92)
3 (76)
0.88 (22)
6.0 (152)
7.5 (191)
4
0.75 (19)
2.58 (66)
5.0 (127)
4 (102)
0.88 (22)
7.5 (191)
9.0 (229)
8
0.75 (19)
3.5 (89)
6.2 (158)
2 (51)
0.82 (21)
5.0 (127)
6.5 (165)
8
0.75 (19)
N/A
3.6 (92)
3 (76)
1.06 (27)
6.62 (168)
8.25 (210)
8
0.88 (22)
2.58 (66)
5.0 (127)
4 (102)
1.19 (30)
7.88 (200)
10.0 (254)
8
0.88 (22)
3.5 (89)
6.2 (158)
DN 50
20 mm
125 mm
165 mm
4
18 mm
N/A
4.0 (102)
DN 80
24 mm
160 mm
200 mm
8
18 mm
66 mm
5.4 (138)
DN 100
24 mm
190 mm
235 mm
8
22 mm
89 mm
6.2 (158)
Dimensions are in inches (millimeters).
Class(1)
ASME B16.5 (ANSI) 150
ASME B16.5 (ANSI) 300
DIN 2501 PN 10–40
DIN 2501 PN 25/40
Lower housing G
Pipe
size
Process
side F
2 (51)
2.12 (54)
0.97 (25)
1.31 (33)
5.65 (143)
3 (76)
3.6 (91)
0.97 (25)
1.31 (33)
5.65 (143)
4 (102)
3.6 (91)
0.97 (25)
1.31 (33)
5.65 (143)
2 (51)
2.12 (54)
0.97 (25)
1.31 (33)
5.65 (143)
3 (76)
3.6 (91)
0.97 (25)
1.31 (33)
5.65 (143)
4 (102)
3.6 (91)
0.97 (25)
1.31 (33)
5.65 (143)
DN 50
2.4 (61)
0.97 (25)
1.31 (33)
5.65 (143)
DN 80
3.6 (91)
0.97 (25)
1.31 (33)
5.65 (143)
DN 100
3.6 (91)
0.97 (25)
1.31 (33)
5.65 (143)
1
/4 NPT
1
/2 NPT
H
(1) Tolerances are -0.020 and +0.040 (-0,51 and +1,02).
74
www.rosemount.com
September 2014
Rosemount 2051
Options
Tag may be stored in transmitter memory. Character limit is
dependent on protocol.
Standard configuration
•HART Revision 5: 8 characters
Unless otherwise specified, transmitter is shipped as follows:
•HART Revision 7 and Wireless: 32 characters
•FOUNDATION fieldbus: 32 characters
ENGINEERING UNITS
Differential/Gage
2051TA
(1)
4 mA (1 Vdc) :
20 mA (5 Vdc)
(1)
:
inH2O (Ranges 1, 2, and 3)
psi (Ranges 4-5)
psi (all ranges)
0 (engineering units)
Upper range limit
•PROFIBUS PA: 32 characters
Commissioning tag(2)
A temporary commissioning tag is attached to all transmitters.
The tag indicates the device ID and allows an area for writing the
location.
Optional Rosemount 304, 305, or 306 Integral
Manifolds
Output:
Linear
Flange type:
Specified model code option
Flange material:
Specified model code option
O-ring material:
Specified model code option
Factory assembled to 2051C and 2051T transmitters. Refer to
Product Data Sheet (document number 00813-0100-4839 for
Rosemount 304 and 00813-0100-4733 for Rosemount 305 and
306) for additional information.
Drain/vent:
Specified model code option
Other seals
LCD Display:
Installed or none
Refer to the Rosemount 1199 Seal Systems Product Data Sheet
(document number 00813-0100-4016) for additional
information.
Alarm
(1):
Software tag:
High
(Blank)
Output information
Output range points must be the same unit of measure.
Available units of measure include:
(1) Not applicable to FOUNDATION fieldbus, PROFIBUS PA, or Wireless.
Custom configuration(1)
Pressure
If Option Code C1 is ordered, the customer may specify the
following data in addition to the standard configuration
parameters.
atm
[email protected] °C(1)
g/cm2
psi
mbar
mmH2O
kg/cm2
torr
bar
mmHg
Pa
[email protected] °C(1)
kPa
[email protected] °C(1)
[email protected] °C(1)
•Output Information
inH20
•Transmitter Information
inHg
ftH20
MPa(1)(2)
•LCD display Configuration
[email protected] °F(1)
hPa(1)
[email protected] °F(1)
kg/SqM(1)
[email protected] °C(1)
Psf(1)
[email protected](1)
[email protected] °C(1)
hPa(1)
bbl
kg
cm3
ft3
lb
m3
gal
L
ton
%
ft
cm
in
mm
•Hardware Selectable Information
•Signal Selection
•Wireless Information
•Scaled Variable
[email protected] °C(1)
Tagging (3 options available)
Standard SST hardware tag is permanently affixed on
transmitter. Tag character height is 0.125 in. (3,18 mm), 84
characters maximum.
Tag may be wired to the transmitter nameplate upon request,
85 characters maximum.
inH2
Flow(2)(3)
•and more
Refer to the “Rosemount 2051 Configuration Data Sheet”
document number 00806-0100-4101.
For Wireless refer to the “Rosemount 2051 Wireless
Configuration Data Sheet” document number
00806-0100-4102.
mmH2
Level(3)
(1) Available with enhanced 2051 and Wireless.
(2) Available on PROFIBUS PA.
(3) All flow units are available per second, minute, hour or day.
Display and interface options
(1)
Not applicable to FOUNDATION fieldbus or PROFIBUS PA protocols.
www.rosemount.com
(2)
Only applicable to FOUNDATION fieldbus.
75
Rosemount 2051
Product Data Sheet
00813-0100-4101, Rev KA
Rosemount Catalog
Emerson Process Management
Rosemount Inc.
8200 Market Boulevard
Chanhassen, MN 55317 USA
T (U.S.) 1-800-999-9307
T (International) (952) 906-8888
F (952) 906-8889
www.rosemount.com
Emerson Process Management
Blegistrasse 23
P.O. Box 1046
CH 6341 Baar
Switzerland
T +41 (0) 41 768 6111
F +41 (0) 41 768 6300
www.rosemount.com
Emerson Process Management
Asia Pacific Pte Ltd
1 Pandan Crescent
Signapore 128461
T +65 6777 8211
F +65 6777 0947
Service Support Hotline: +65 6770 8711
Emerson Process Management
Latin America
1300 Concord Terrace, Suite 400
Sunrise, Florida 33323 USA
Tel + 1 954 846 5030
Email: [email protected]
www.rosemount.com
Standard Terms and Conditions of Sale can be found at www.rosemount.com\terms_of_sale
The Emerson logo is a trade mark and service mark of Emerson Electric Co.
Instrument Toolkit, SmartPower, Coplanar, Rosemount, and the Rosemount logotype are registered trademarks of Rosemount Inc.
PlantWeb is a registered trademark of one of the Emerson Process Management group of companies.
HART and WirelessHART are registered trademarks of the HART Communication Foundation.
FOUNDATION fieldbus is a registered trademark of the Fieldbus Foundation.
PROFIBUS is a registered trademark of PROFINET International (PI).
D.C. Silicone 704 and SYLTHERM are trademarks of Dow Corning Corporation.
Neobee M-20 is a registered trademark of Stepan Speciality Products, LLC.
eurofast and minifast are registered trademarks of TURCK.
Fluorinert is a trademark of 3M.
All other marks are the property of their respective owners.
© 2014 Rosemount Inc. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement