B e d r a I l s

B e d   r a I l s
I n va c a r e ®
Bed Rails
All Invacare® Bed Rails feature durable chrome-plated, welded steel construction and are designed to withstand heavy-duty
use. These rails can be installed permanently or semi-permanently on most spring-fabric medical-style beds. When properly
used, bed rails are some of the most important safety and accident prevention accessories used in the patient room today.
Invacare beds, mattresses and rails, excluding therapeutic support surfaces and bariatric beds, when used as a system
and sold new after August 1, 2007, meet the voluntary FDA Guidelines for bed rail entrapment. Visit www.invacare.com/
bedsafety for additional safety and entrapment information.
1. Invacare® Reduced Gap Full-length Bed Rail
1
HCPCS Code: E0310
Model # 6629
Durable 7⁄8" chrome-plated, welded steel construction
Self-adjusting spring-loaded crossbraces snap easily into place without tools for
quick installation
2. Invacare® Reduced Gap Half-Length Bed Rail
Model # 6630
2
HCPCS Code: E0305
Heavy-duty 1" chrome-plated, welded steel construction
Dual flat-channel crossbraces are secured with wing-nut clamp assemblies
(some assembly required)
For optimal safety and convenience, four half-length rails are recommended
(one set for head area and one set for foot area)
HCPCS Code: E0305
3. Invacare® Assist Bed Rail
3
Model # 6632
Heavy-duty 1" powder coated, welded steel construction
3 positions: Guard, Assist, Transfers
Moves easily out of the way with a quick release button
4. Invacare® Extra-Wide
Full-length Bed Rail
4
HCPCS Code: E0310
Model # 6628-TSS
Heavy-duty 1" chrome-plated, welded steel construction
Self-adjusting extra-wide spring-loaded crossbraces snap
easily into place without tools for quick installation
Optional hardware is included for clamp-on
For use with TSS mattresses
5
5. Invacare® Reduced Gap
Heavy-Duty Half-Length Bed Rail
HCPCS Code: E0305
Model # BAR6640IVC
Heavy-duty 1" chrome-plated, welded steel construction
Bolt-on hardware for added strength
Note: Whenever bed rails are used as part of any hospital or home
care bed system, the potential for bed rail entrapment exists. To
reduce this risk, a patient must always be assessed regarding their
risk of entrapment before any product is used. Routine patient
monitoring is also required once a product is in use. To learn
more about the risk of bed rail entrapment please visit the US
FDA’s website at http://www.fda.gov and search for "Bed Rail
Entrapment."
Model #
Rail Length* For optimal safety and convenience, four half-length rails are
recommended (one set for head area and one set for foot
area)
Use with BAR600IVC bed only
Rail Height Rail Height
Width Above Deck Above Deck
Between
RaisedLowered Rails
Shipping Weight Limited
Warranty
1 Year
6628-TSS
56"
14.5"
3.75"
38"
31.5 lb.
6629
55"
14.5"
4.25"
36"
27.5 lb.
1 Year
6630
32"
15"
4.75"
36.5"
23.5 lb.
1 Year
6632
27"
14.5"
N/A
36"
21 lb.
1 Year
BAR6640IVC
28.75"
15"
3.5"
42"
25 lb.
1 Year
*Measurement on flat bed with crossbraces installed as per instruction sheet.
All references to HCPCS codes: Providers are responsible for determining the appropriate billing codes when submitting claims to the Medicare program, and should
consult an attorney or other advisor to discuss specific situations in further detail.
Invacare Corporation
www.invacare.com
USA
One Invacare Way
Elyria, Ohio
44035- 4190
(800) 333- 6900
Canada
570 Matheson Blvd. E.,
Unit 8
Mississauga, Ontario
L4Z 4G4 Canada
(800) 668-5324
©2012
Invacare Corporation.
All rights reserved.
Trademarks are identified
by the symbols ™ and
®. All trademarks are
owned by or licensed
to Invacare Corporation
unless otherwise noted.
Specifications are subject
to change without
notification.
Form No. 11-174
Rev. 03/12
111222
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement