50281 2 ifs d2300 series ds fin

50281 2 ifs d2300 series ds fin
IFS® Line / Fiber Transmission
D2300 Series
IFS RS-485 (2-wire) Drop and Repeat
Data Transceivers
Specifications
Data
Data Interface:
Data Rate:
Total Network Pulse Distortion:
RS-485 (2-wire)
DC - 200 Kbps
<1μs
D2300: 850 nm, Multimode
All others: 1310 nm, Multimode or SingleSTANDARD
Mode
Wavelength
OVERVIEW
FEATURES
Number The
Of Fibers
2 In/2 Outprovide drop and repeat
IFS D2300 Series data transceivers
• Meets EIA RS-485 Specifications
transmission of half-duplex (2-wire) EIARS-485 data signals over
• Tested and Certified by an Independent Testing Laboratory for Full
Connectors
one
or
two
optical
fibers.
The
transceivers
feature
optical
“drop
Compliance with the Environmental Requirements (Ambient
Data and Power:
Terminal Block with Screw Clamps
Operating Temperature, Mechanical Shock, Vibration, Humidity
Optical: & repeat” capability that allowsSTthe user to easily configure the
network operation. The transceivers are transparent to data
with Condensation, High-Line/Low-Line Voltage Conditions and
Electricalencoding
& Mechanical
Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
allowing for broad-range compatibility. The D2300
Power: Series transceivers can be used as line-terminating devices
Specification for Traffic Signal Control Equipment.
Surface Mount:
12 VDC @ 250 mA to 24 VDC @ 125 mA
series are available for
• Automatic Resettable Solid-State Current Limiters
Rack: with these modules. Models within
Fromthis
Rack
use
with
multimode
or
single
mode
optical
fiber.
• Power, Transmit and Receive Data Status LED Indicators
Plug-and-play
Number of Rack Slots:
1
No In-field Electrical or Optical Adjustments Required
design ensures ease of installation
requiring
no electricalSolid-State
or optical Current
• Limiters
Current Protection:
Automatic
Resettable
Circuit Board:
IPC Standard
adjustments. Each transceiverMeets
incorporates
power and transmit/
• Data rates up to 200 kbps NRZ
Size (in./cm.)
(LxWxH)
• Data Re-clocking
receive
data status indicating LED’s for monitoring proper system
Surface Mount:
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm • Transparent to Data Encoding/Compatible with Major Data
operation. The modules are available in either stand-alone or rack
Rack Mount:
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
versions.
Protocols
Shippingmount
Weight:
< 2 lbs./0.9 kg
• Drop and Repeat Network Architecture
• 2-Wire (Half-Duplex)
Environmental
MTBF: APPLICATION EXAMPLES
> 100,000 hours
• True Tri-State Output
Operating Temp:
-40° C to +74° C
• Distances up to 20 Miles (33km)
Storage Temp:
-40° C to +85° C
• Access Control Systems
• Comprehensive Lifetime Warranty
Relative Humidity:
0% to 95% (non-condensing)†
• Building Automation and Environmental Control Systems
• Computer/Data
Equipment
†May be extended
to condensation
conditions by adding suffix ‘–C’ to
model number
for&conformal
coating.
• Fire
Alarm Systems
• ITS Traffic Signalization Networks
System Design
SYSTEM DESIGN
up to 1.9 miles
(3 km)
D1300
ifs
203.426.1180
International
Fiber
Systems
Incorporated
D2300
ifs
D2300
International
ifs
Fiber
Systems
Incorporated
203.426.1180
International
Fiber
Systems
Incorporated
203.426.1180
Control
Data
Control
Data
2 Fibers
62.5/125μm MM
D1300
ifs
International
Fiber
Systems
Incorporated
203.426.1180
Control
Data
Control
Data
Host
interlogix.com
D2300 Series
North America
T 855-286-8889
Latin America
T 561-998-6114
IFS RS-485 (2-wire) Drop and Repeat Data Transceivers
Ordering Information
Part Number
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
Multimode 62.5/125µm**
D2300
RS-485, 2-Wire Repeater (850 nm)
2 In/2 Out
10 dB
1.9 miles (3 km)
D2320
RS-485, 2-Wire Repeater (1310 nm)
2 In/2 Out
10 dB
6 miles (10 km)
Single Mode 9/125µm
D2325
RS-485, 2-Wire Repeater (1310 nm)
2 In/2 Out
23 dB
20 miles (33 km)
Accessories ♦
PS12VDC1.5A-U
12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
Options
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
GE
Security
Specifications
Data
Data Interface:
RS-485 (2-wire)
Data Rate:
DC - 200 Kbps*
Total Network Pulse Distortion:
<1µs
Wavelength
D2300: 850 nm, Multimode
All others: 1310 nm, Multimode or Single Mode
Number Of Fibers
2 In/2 Out
Connectors
Date and Power:
Terminal Block with Screw Clamps
Optical:
ST
Electrical & Mechanical
Power:
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [email protected]
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Surface Mount:
12 VDC @ 250 mA to 24 VAC @ 125 mA
Rack:
From Rack
Number of Rack Slots:
1
Current Protection:
Automatic Resettable Solid-State Current Limiters
gesecurity.com/ifs
Circuit Board:
Meets IPC Standard
Specifications subject to
change without notice
Size (in./cm.) (LxWxH)
Surface Mount:
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Rack Mount:
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
Shipping Weight:
< 2 lbs./0.9 kg
Latin America
T 305-593-4301
F 305-593-4300
Agency Compliance
© 2008 General Electric Company
Complies
with
FDA Performance
All Rights
Reserved
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Environmental
MTBF:
> 100,000 hours
Operating Temp:
-40° C to +74° C*
Storage Temp:
-40° C to +85° C*
Relative Humidity:
0% to 95% (non-condensing)
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Ordering Information
PartNumber
D1010
interlogix.com
D1010WDMA✧
Multimode
D1010WDMB
62.5/125µm**
Specifications subject
to change without
notice.
D1020
© 2013 United Technologies Corporation
All rights
reserved.
D1030
Interlogix is part of UTC Building
& Industrial
Systems, ✧
Single Mode
D1030WDMA
a unit of United
Technologies Corporation.
9/125µm
D1030WDMB
Accessories♦
Options
De
RS
RS
RS
RS
RS
RS
RS
D2300 Series
PS-12VDC 12 Volt DC Plu
PS-12VDC-230 12 Volt D
Add ‘-R3’ to Model Num
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement