User manual | Mid frame Air Deflector Trim Kit

INSTALLED 09 OCT 2012
21,607 MILES
INSTRUCTIONS I
-J05338
REV. 2010-11-10
MID-FRAME AIR DEFL:ECTOR TRIM
GENERAL
NOTE
Kit Number
Ambient temperature should be at least 50 OF (10°C) for
proper adhesion.
61400028
4.
Models
FonTibdelfitment info"rmafion, see the P&A Retail Catalog "or
the Parts and Accessories section ofwww.harley-davidson.com
(English only).
Kit Contents
See Figure 1. Remove the adhesive backing from a trim
piece and install onto the mid-frame air deflector. Start at
the top, front corners of the mid-frafiw-d-eflector and install
downward around the mid-frame deflector. Make sure that
the lip of the trim piece engages the front edge of the mid­
frame deflector. Repeat this step for the opposite side
deflector.
This kit contains a left side and right side mid-frame air deflector
trim piece.
There are no Service Parts available with this kit.
INSTALLATION
1.
Without removing the adhesive backing, test the fit of the
trim pieces on the mid-frame air deflectors. Note the lip
on the trim piece that is designed to engage the front edge
of the mid-frame air deflector.
2. Thoroughly clean the mid-frame air deflectors:
a.
_
b.
3.
Clean mid-frame air deflectors thoroughly with soap
allow to dry.
-an~water-aAd
Clean the trim mounting area of the mid-frame air
deflectors with an approximately 1: 1 mixture of isop­
ropyl alcohol and water. Allow to dry completely.
1. Mid-frame air deflector
2. Mid-frame air deflector trim
Figure 1. Mid-Frame Air Deflector Trim
Rub the adhesive backings on the trim pieces to activate
the adhesive.
-J05338
1 of 1

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project