WRGCAMV8 Manual
2007-2016 Jeep Wrangler
1.
Fixed mount rear-view camera for mounting on the spare tire.
1.
2.
3.
4.
Remove the outside mounted spare tire.
Mount the CCH-01S metal bracket onto the bolts and secure with the star washers.
Run the cable to the inside of the cabin towards the radio.
Make the power and video connections to the OE radio (with the use of Crux part# MG-3, sold separately)
or to an aftermarket radio.
Cut the thin white wire on the camera cable to enable the parking guide lines.
5.
Camera Specifications:
Sensor
Viewing Angle (H)
Viewing Angle (V)
TV System
Guide Lines
Invert Image
Resolution
Illumination
CCD
170°
90°
NTSC / PAL
Yes
No
480 TV Lines
0.2 Lux / F1.8
Power Supply
12v
Waterproof
IP67 - IP68
Dimensions
10 x 7 x 3.5
Parking Line Delete
Yes (White Wire)
Reverse Image
No
Camera Cable Length
2 ft.
Extension Cable
20 ft.
1
rev.092915
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement