2014 XMN1004 4/3/2 Channel 1000W Amplifier Features • • • • • • • • • 70W x 4 RMS at 4 Ohms 85W x 4 RMS power at 2 Ohms 70W x 2 + 175W x 1 RMS at 4 Ohms 170W x 4 max power at 4 Ohms 500W x 2 max power at 4 Ohms 1000 Watts Max Power Selectable HPF and LPF Automatic Thermal Control Single sided connections PARTS 4-464-857-21 MANUAL, INSTRUCTION 4-166-803-01 COVER (POWER) X-2587-556-1 PLATE TOP, ASSY 4-455-368-11 HEAT SINK (MAIN) 4-455-373-01 SHEET HEAT TRANSFER Specifications Amplifier Section Max power output: 1000W max power Power Ad Hoc: 70W per channel at 4 Ohms Speaker Impedance: 2-8 Ohm stereo 4-8 Ohms mono Audio Circuit System: OTL (Output Transformerless) circuit Pulse Power Supply Impedance: 2-8 Ohm stereo 4-8 Ohms mono Input Level: 0.3 - 6.0V (RCA input) Power Supply: OTL (Output Transformerless) circuit Pulse Power Supply Signal Circuitry: Selectable HPF/LPF crossovers Signal-to-Noise Ratio (dB): 93 dBA Audio Features Level Control: 0.3 - 6.0V (RCA input) Inputs and Outputs Audio In: RCA Pin Jacks Audio Out: Speaker Terminals Input(s): RCA Pin Jacks Line Level Input(s): RCA pin jacks Output(s): Speaker Terminals RCA Audio Input(s): Pin Jacks: 0.3 - 6V Power Current Drain: At rated output: 36A (at 4 Ohms) Remote Input: 1 Input Voltage: 10.5-16V Power Supply Voltage Internal Power Supply: OTL (Output Transformerless) circuit Pulse Power Supply Output Power: Maximum Output: 170W x 4 (at 4 Ohm) Power Requirements: 12V DC Car Battery (Negative Ground) Rated Output: 70W x 4 (20Hz-20kHz, 1% THD+N, 4 Ohms, 14.4V)1 85W x 4 (20Hz-20kHz, 1% THD+N, 2 Ohms, 14.4V) 175W x 2 RMS (20Hz-20kHZ 1.0% THD+N, at 4 Ohms) Speaker Impedance: 2-8 Ohms in Stereo Mode 4-8 Ohms mono Speaker Terminal Type: Gold plated terminals Weights and Measurements Dimensions (Approx.): 13 1/2" x 2 1/8" x 9 1/8" Weight (Approx.): 6 lb (2.7 kg) Premium Brands. Premium Service.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project