Aqua Flo 475 Series Reverse Osmosis Systems

Aqua Flo 475 Series Reverse Osmosis Systems
Aqua Flo 475 Series Reverse
Osmosis Systems
Fast, Simple & Sanitary Maintenance!
Quick connect disposable cartridges and
membrane make for easy ‘Do-It-Yourself’
maintenance. With built in auto water shut-offs
there is no need to turn off the water supply
prior to maintenance.
Because traditional systems require the
disinfection of the permanent housing canisters
and involve more direct human contact,
maintenance can take as much as an hour
and if not done properly can result in a
contaminated system.
Disposable cartridges changes in seconds and
reduce contamination risk!
“Change filters in
seconds without
turning off water!
No tools required!
”
All models feature:
kFour stage filtration: 5 micron sediment pre-filter, 10 micron coconut carbon pre & post filters, quick connect 75 GPD NSF Certified TFC membrane
kBayonet-style 1/4 turn quick connect
disposable cartridges with auto water shut-off
k3/8” tubing for high product flow rate from tank to faucet
kQuick connect fittings, inlet saddle and drain saddle, labelled tubing for easy installation
kTwo year warranty (excluding consumable filter cartridges and RO membrane)
kIncludes faucet and 3.0 gallon NSF Certified storage tank.(Designer faucets available)
Model Description
Stages
Sediment
Filter
Pre-Filter
Membrane
Post-Filter
Rating
GPD
Dimensions
H x W x D (in)
Aqua Flo 475 PRO
Aqua Flo 475 PRO BP
4
4
5 Micron
5 Micron
10 Micron Coconut Carbon
10 Micron Coconut Carbon
TFC
TFC
10 Micron Coconut Carbon
10 Micron Coconut Carbon
75
75
14.5 x 13 x 4.5
16.5 x 14.5 x 6.25
Replacement Filters / Options
SED-10 (Sediment Filter - 5 Micron)
COC-10 Coconut Carbon (Pre & Post 10 Micron)
CB-10 Carbon Block (Optional Filter - 10 Micron)
GAC-10 Granular Carbon (Optional Filter)
RO Membrane 75 GPD TFC
Feed Water Guidelines
Maximum TDS
2000 ppm
Hardness
<7gpg
Iron (Fe)
<0.2ppm
Manganese (Mn)
<0.05ppm
Hydrogen Sulfide
0.0ppm
Turbidity
<1.0NTU
Feed Water Pressure
40-100psi
Temperature
40-100°F
pH Range
3.0-11.0
Note: Pretreatment suggested if conditions exceed
parameters. Must be installed on potable water.
Booster Pump Model also includes:
kPump mounted on RO to maintain constant water pressure
kRaises water pressure to ideal level for maximum
efficiency
kUse on rural supplies with low pressure or highTDS
kExclusive Auto Flush feature extends membrane life
kSelf-priming and whisper quiet
k24VAC transformer (included) from a standard 120VAC electrical outlet
kFlexible mounting plate, quick connect fittings and pressure shut-off switch
Your Local Water Specialist
80157000 04/15
www.canaturewg.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement