BR Precision | 040210 | Specifications | BR Precision 040210 Specifications

1.800.565.5911
Boating
Supplies
MOORING & ANCHORING
Boating
Supplies
Boating
Supplies
Boating
Supplies
info@CargoEast.ca | P: (204) 956.0771 | F: (204) 957.5886 | #3 276 Marion St. Winnipeg, MB R2H 0T7
PAGE 1
MOORING & ANCHORING
Anchor & Dock Lines
Anchor Line & Dockline
840 - 841
Snubbers & Accessories
841
Chain & Logging
Fenders & Buoys
842 - 843
Fenders & Buoys
845 - 849
Fender Covers & Holders
849 - 851
Fender Lines
852
Dock Bumpers
852 - 855
Mooring Whips
855
Dock Lighting
855
Dock Ladders & Cleats
Anchors & Accessories
Windlasses
Boat Hooks & Pike Poles
839
856 - 857
Anchors
857 - 861
Anchor Rollers
861 - 864
Anchor Accessories
865 - 866
Maxwell
868 - 874
Endurance
874
Anchorlift
865 - 876
877
840
Dock Lines / Anchor Lines
Performance Ropes DB Nylon Dock Lines
Samson Dual Braid Nylon Dock Lines
• Ready for use
• Excellent shock absorption & elastic
recovery
• Excellent abrasion resistance
• Good UV resistant
• Resistant to rot, oil, gasoline & most
chemicals
• Spliced with 12" eye
• Whipped at splice and bitter end
Long lasting and beautiful to
handle. These 100% nylon braided
lines come complete with a 12"
eye splice and a heat shrink sleeve
that finishes the tail end. Available
in three solid colours (blue, black,
and red), golden braid (white with a gold fleck) and white.
* use colour code when ordering
i.e. SAM DL-BK-1/2 x 20'= (1/2" black dockline)
Part #
(GW)
Golden
Braid
(BL)
Solid
Blue
(BK)
Solid
Black
SAM DL(colour)-3/8" x 10'
●
●
●
4,500
SAM DL(colour)-3/8" x 15'
●
●
●
4,500
SAM DL(colour)-3/8" x 20'
●
●
●
4,500
SAM DL(colour)-3/8" x 25'
●
●
●
4,500
SAM DL(colour)-1/2" x 10'
●
●
●
7,900
SAM DL(colour)-1/2" x 15'
●
●
●
7,900
SAM DL(colour)-1/2" x 20'
●
●
●
7,900
SAM DL(colour)-1/2" x 25'
●
●
●
7,900
SAM DL(colour)-1/2" x 30'
●
●
●
7,900
SAM DL(colour)-5/8" x 20'
●
●
●
●
14,000
SAM DL(colour)-5/8" x 25'
●
●
●
●
14,000
SAM DL(colour)-5/8" x 30'
●
●
●
●
14,000
SAM DL(colour)-5/8" x 35'
●
●
(WH)
White
Strength
lbs
●
14,000
SAM DL(colour)-5/8" x 50'
●
14,000
SAM DL(colour)-3/4" x 35'
●
19,400
SAM DL(colour)-3/4" x 50'
●
19,400
BK = Black
BL = Blue
NB = Navy
GW = Gold/White
WH = White
PRS DB-3/8X10-BK
PRS DB-3/8X10-GW
PRS DB-3/8X10-NB
PRS DB-3/8X15-BK
PRS DB-3/8X15-GW
PRS DB-3/8X15-NB
PRS DB-3/8X15-WH
PRS DB-3/8X20-BK
PRS DB-3/8X20-GW
PRS DB-3/8X20-NB
PRS DB-3/8X20-WH
PRS DB-3/8X25-BK
PRS DB-3/8X25-BL
PRS DB-3/8X25-GW
PRS DB-3/8X30-GW
Samson Gold Braid Anchor Lines
A high-strength, non-twisting, free-running, rot proof 100%
dual braid nylon. Gold-Braid are double braids composed of a
braided nylon core with a braided nylon cover and are shipped
with a pre-spliced, reinforced black synthetic captive thimble.
All Samson dock and anchor lines are treated with Samson’s
Pro-Gard 1000 marine finish to enhance wet strength and
abrasion resistance. Supplied in a re-useable plastic container
with lid, (5/8" x 300' on reel).
MOORING & ANCHORING
Part #
Strength lbs
SAM AL-3/8X100
4,500
SAM AL-3/8X150
4,500
SAM AL-3/8X200
4,500
SAM AL-3/8X250
4,500
SAM AL-3/8X300
4,500
SAM AL-1/2X150
7,900
SAM AL-1/2X200
7,900
SAM AL-1/2X250
7,900
SAM AL-1/2X300
7,900
SAM AL-5/8X200
14,000
SAM AL-5/8X250
14,000
SAM AL-5/8X300
14,000
PRS DB-1/2X10-GW
PRS DB-1/2X15-BK
PRS DB-1/2X15-GW
PRS DB-1/2X15-NB
PRS DB-1/2X15-WH
PRS DB-1/2X20-BK
PRS DB-1/2X20-GW
PRS DB-1/2X20-NB
PRS DB-1/2X20-WH
PRS DB-1/2X25-BK
PRS DB-1/2X25-GW
PRS DB-1/2X25-NB
PRS DB-1/2X30-BK
PRS DB-1/2X30-GW
PRS DB-1/2X30-NB
PRS DB-1/2X35-GW
PRS DB-5/8X20-BK
PRS DB-5/8X20-GW
PRS DB-5/8X20-NB
PRS DB-5/8X25-BK
PRS DB-5/8X25-GW
PRS DB-5/8X25-NB
PRS DB-5/8X30-BK
PRS DB-5/8X30-GW
PRS DB-5/8X30-NB
PRS DB-5/8X35-BK
PRS DB-5/8X35-GW
PRS DB-5/8X35-NB
Performance Ropes
Dual Braid Gold Nylon Anchor Lines
• 100 % nylon
• Resistant to rot, gasoline and most chemicals
• Good UV resistance
• Complete with stainless steel thimble
• Whipped at splice and bitter end
• Gold braid
PRS AL-3/8X50-GW
PRS AL-3/8X100-GW
PRS AL-3/8X150-GW
PRS AL-3/8X200-GW
PRS AL-1/2X100-GW
PRS AL-1/2X150-GW
PRS AL-1/2X200-GW
PRS AL-1/2X250-GW
PRS AL-1/2X300-GW
PRS AL-5/8X150-GW
PRS AL-5/8X200-GW
Anchor Lines / Dock Lines / Line Snubbers
Performance Ropes
Nylon Anchor Line w/ Snap Hook
• Good shock absorption
• Resistant to rot, gasoline and most
chemicals
• Weather resistant interior
• Complete with steel snap
• Blister packed
PRS ALS-3/16X50
PRS ALS-3/16X100
PRS ALS-3/16X150
Sea-Dog Mooring Line Chafe Kits
• Leather chafe protectors including
waxed twine and a needle for sewing
• Sold in pairs
• Length: 10"
SED 561010-1
SED 561012-1
SED 561016-1
SED 561019-1
3/8" & 7/16"
1/2"
5/8"
3/4"
Davis Mooring Line Chafe Guard
Performance Ropes
3 Strand White Nylon Anchor Lines
• 100 % nylon
• Good UV resistance
• Complete with stainless steel thimble
• Whipped at splice and bitter end
PRS 3S-3/8X100
PRS 3S-1/2X150
Chafe protection is critical at the dock,
at anchor, or on a mooring. Removable
chafe guards fit 3/8" to 7/8" line (10 mm
to 23 mm). Velcro brand hook fasteners
on the inside of the guard grip the line
securely; no need for additional strings or ties. Easily reposition
when dock lines stretch and chafe protection needs to be moved.
Made of nylon.
Sold by the pair. Each chafe guard is 16" long (40 cm).
DIN 395
Canada Cordage Nylon
Anchor Line
Proflex Mooring Snubbers
3-Strand nylon is flexible, has high abrasion
resistance, can be stored wet, resists most
acids, alkalis and organic solvents. Comes with
a spliced-in plastic thimble. It will not rot.
Accepts line up to 3/4" diameter.
Unharmed by salt, ozone & UV rays.
These snubbers are 24" long and are
available in 3 colours.
CCI 14205
841
3/8" x 100'
Greenfield Anchor Buddy
The anchor rope that stretches from
14 feet to 50 feet. Works with ski boats,
fishing boats, sail boats, patio boats,
rafts, and jet skis up to 4,000 lbs. Works
in lakes, rivers, and the ocean. Enables
you to anchor straight down. The shock
is taken out of your anchor line and the anchor isn't pulled loose
in waves and swells as with a straight line.
PCS PLS-BK
PCS PLS-BL
PCS PLS-R
Black
Blue
Red
Just Ducky Mooring Snubbers
• Black
PCS PC12-BK
PCS PC18-BK
PCS PC24-BK
12"
18"
24"
GRN AB4000-BLUE
Airhead bungee dock lines absorb shock
to boats, cleats, docks, pylons and other
hardware. The bungee cord is hidden inside
the rope and acts as a built-in snubber.
Two foam floats protect the boat from chafing.
There’s a sliding adjustment at both ends for quick docking.
Recommended for docking boats and PWC’s up to 4,000 lbs.
Tensile strength is 2,150 lbs. Black / blue / red colour scheme.
KWI AHDL-4
KWI AHDL-5
KWI AHDL-6
4', stretches to 5-3/4'
5', stretches to 7'
6', stretches to 9'
Davis Instruments Line Snubbers
A tough rubber snubber to absorb
mooring line shocks caused by wind,
waves and wakes. Sun, salt and water
resistant.
DIN 1468B
DIN 1463B
1/2" x 22"
1/2" x 15"
Falcon Mooring Snubbers
Made from EPDM rubber and injection molded nylon
locking elements, these snubbers have an unprecedented
5-year free replacement guarantee.
FAL LLM-1
FAL LLM-2
FAL LLM-3
FAL LLM-4
3/8" rope
5/8" rope
3/4" rope
1" rope
MOORING & ANCHORING
Kwik Tek Bungee Dock Lines
842
Trolling Springs / Logging / Links
Galvanized Trolling Springs
Crosby Missing Links
Popular as a mooring line shock absorber.
Bright plated.
Forged steel, integral rivets for
connecting two pieces of chain, etc.
Must be peened after connection. Hot
dip galvanized.
WES 1-1/2"X12"
1-1/2" x 22"
Chain
Size
SWL
OD
ID
CRO G335-1/4"
1/4"
1325
1.5 x 1.0
.88 x .44
Rafting Dogs
Part #
Forged steel available in 1/2" and 5/8" sizes.
LOA
ID Eye
CRO G335-5/16"
5/16"
1950
1.69 x 1.16
.94 x .47
LOG RD1/2"
5-1/2"
1-1/8"
CRO G335-3/8"
3/8"
2750
2.06 x 1.38
1.13 x .56
LOG RD5/8"
6-3/4"
1-1/4"
CRO G335-1/2"
1/2"
4750
2.66 x 1.72
1.47 x .66
CRO G335-5/8"
5/8"
7250
3.31 x 2.09
1.81 x .78
Part # / Size
Black Log Staples
Part# is the item size x length.
Electro-galvanized mild steel.
Display packed.
LOG 3/8X4
LOG 3/8X41/2
LOG 3/8X5
LOG 1/2X4
LOG 1/2X41/2
LOG 1/2X5
LOG 1/2X6
Part #
SED 160110-1
Gauge
Length
Width
3/8"
2-3/8"
1-1/2"
Greenfield Products Coated Chain
Brass Plumbers Chain
A solid brass, 1/0, light duty chain
useful for numerous applications
where noncorrosive support/safety chain is required. Sold by
the foot.
CHN 1/0
Sea-Dog Lap Links
Per foot
Anchor lead chain fits most anchor/rode
combinations. Over-sized end links for easy
shackle attachment. PVC coated, hot dip
galvanized for years of service.
GRN 2115-B
GRN 2115-RD
GRN 2115-W
GRN 2115-Y
GRN 2116-W
N ot e s
1/4" x 4' Black
1/4" x 4' Red
1/4" x 4' White
1/4" x 4' Yellow
5/16" x 5' White
MOORING & ANCHORING
Chain
843
Import Galvanized Chain
CMP Global Grade 30 Galvanized Chain
An inexpensive hot galvanized anchor
chain. Conveniently packaged on reels or
in a wooden box.
• ISO hot dip galvanized
• Sold by the foot or barrel
Part #
Size
Length
CHN CMG33/16
3/16"
Cut
CHN CMG33/16"X250'
3/16"
*250'
CHN CMG33/16"X800'
3/16”
800’
CHN CMG31/4
1/4"
Cut
CHN CMG31/4"X141'
1/4"
*141'
CHN CMG31/4"X400'
1/4"
400'
CHN CMG31/4"X800'
1/4”
800’
CHN CMG35/16
5/16”
Cut
CHN CMG35/16"X92'
5/16"
*92'
CHN CMG35/16”X550'
5/16”
550’
CHN CMG33/8
3/8”
Cut
CHN CMG33/8"X63'
3/8"
*63'
CHN CMG33/8”X400'
3/8”
400’
CHN CMG31/2
1/2”
Cut
CHN CMG31/2"X36'
1/2"
*36'
CHN CMG31/2”X200'
1/2”
200’
CHN 1/4"X100FT
CHN 1/4"X200FT
CHN 5/16"X70FT
CHN 5/16"X200FT
CHN 3/8"X200 FT
Reel
Box
Reel
Box
Box
Working
Load
Weight
per 100’
800 lbs
40 lbs
Stainless Steel Chain
71 lbs
High quality, outstanding looking, 316
stainless steel chain is the ultimate in
corrosion resistance.
Not recommended for windlasses.
Sold by the foot.
1,300 lbs
Part #
CHN SS3/16"
1,900 lbs
100 lbs
2,650 lbs
152 lbs
4,500 lbs
265 lbs
Inside
Length
Inside
Width
Breaking
Strength
24 mm
10.2 mm
3200#
CHN SS1/4"
29.3 mm
11 mm
5200#
CHN SS5/16"
31.5 mm
12.4 mm
7600#
CHN SS3/8"
33.6 mm
15.1 mm
10600#
*Comes in a re-usable platic pail
CMP Global Grade 43 Galvanized Chain
• ISO high test, hot galvanized
• Calibrated for windlasses
• High carbon steel
• Sold by the foot or barrel
Part #
Size
Length
1/4”
Cut
CHN CMG41/4"X400'
1/4"
400'
CHN CMG41/4”X800'
1/4”
800’
CHN CMG45/16
5/16”
Cut
CHN CMG45/16"X300'
5/16"
300'
CHN CMG45/16”X550'
5/16”
550’
CHN CMG43/8
3/8”
Cut
CHN CMG43/8”X400'
3/8”
400’
CHN CMG41/2
1/2”
Cut
CHN CMG41/2”X200'
1/2”
200’
Weight
per 100’
2,600 lbs
75 lbs
3,900 lbs
107 lbs
5,400 lbs
152 lbs
9,200 lbs
256 lbs
MOORING & ANCHORING
CHN CMG41/4
Working
Load
845
Polyform
MOORING & ANCHORING
846
Fenders / Buoys
Polyform G-Series Fenders
Economical fenders with molded in ribbed construction from a tough
commercial strength marine vinyl in one piece. Lifetime guarantee.
Colours: white II, black III, teal VII, forest green VIII, blue XII, burgundy XIII,
cobalt blue XVI or sand XVII
Teal
Burgundy
Cobalt
Blue
Forest
Green
Sand
●
●
●
●
●
●
●
●
●
●
●
●
●
Part #
Colour
Size
Boat Size
White
Black
Blue
POL G-1
(colour code)
3-1/2" x 13"
up to 15'
●
●
POL G-2
(colour code)
4-1/2" x 16"
10' to 20'
●
●
●
●
POL G-3
(colour code)
5-1/2" x 20"
15' to 25'
●
●
●
POL G-4
(colour code)
6-1/2" x 23"
20' to 30'
●
●
●
POL G-5
(colour code)
8-1/2" x 27"
25' to 40'
●
●
●
POL G-6
(colour code)
10-1/2" x 30"
35' and over
●
●
●
●
●
*When ordering specify colour code i.e POLG-2/XII
Polyform HTM Series Fenders
Polyform's Hole Through-the-Middle fender, with its quality finish, one piece
construction and tough commercial strength marine vinyl, is the finest fender available.
The unique and reliable Polyform valve system allows you to adjust the firmness of the
fender to suit your needs. Hole size 5/8".
Colour Code - white II , black III, blue XII or cobalt blue XVI
Colour
Size
Boat Size
White
Black
Blue
POL HTM-1
Part #
(Colour Code)
6" x 15"
up to 30'
●
●
●
Cobalt Blue
POL HTM-2
(Colour Code)
8" x 20"
25' - 45'
●
●
●
●
POL HTM-3
(Colour Code)
10" x 26"
40' - 60'
●
●
●
●
POL HTM-4
(Colour Code)
12" x 34"
50' and over
●
●
*When ordering specify colour code i.e POLHTM-2/II
Polyform LD-Series Buoys
Polyform F-Series Fenders
MOORING & ANCHORING
Heavy duty classic European style
twin-eye fender. Molded from tough
commercial strength marine vinyl. Onepiece construction. These are the strongest
fenders made by Polyform. Designed for
rough commercial use. Classic white with
blue tips.
Polyform's low-drag buoy is specifically designed for
the commercial industry. This one-piece, ribbed design
buoy allows for less surface drag which means faster
retrieval time with less strain on your gear. LD buoys
create less than 20% of the drag of standard round
buoys. Comes in red or white with a blue top.
Part #
Size
Boat Size
Colour
POL LD-2-IV
11.5" x 24"
20' to 30'
Red
Size
Boat Size
POL LD-3-IV
13.5" x 29"
40' to 50'
Red
POL F-1/II
6" x 24"
20' to 30'
POL LD-2-II
11.5" x 24"
20' to 30
White
POL F-2/II
8.2" x 25"
20' to 30'
POL LD-3-II
13.5" x 29"
40' to 50'
White
POL F-3/II
8.2" x 30"
20' to 30'
POL F-4/II
8.5" x 40.5"
30' to 40'
POL F-5/II
11" x 30"
30' to 40'
POL F-7/II
15" x 41"
50' to 60'
Part #
Polyform S-1 Fender
The elongated shape allows the buoy to sit higher in the
water than a round buoy, making it more visible during
times of strong currents or waves. Stronger and more UV
resistant than standard foam fishing floats. Also serves as
a very effective fender for boats with little freeboard.
POL S-1/XII
Blue 6" x 15.5"
Not recommended for boats over 20'
Buoys
847
Polyform A-Series Buoys
The only one-piece reinforced rope hold buoy on the market today. Widely
used in commercial fishing, offshore oil and commercial marine as well as
recreational marine.
• Fluorescent red with blue top-IV
• White with blue top-II
Part #
POL A-0/(colour)
Dia
Circ
Boat
Size
Red/w
Blue Top
White/w
Blue Top
9"
28.5"
Up to 25'
●
●
POL A-1/(colour)
11.5"
36.0"
20' to 35'
●
●
POL A-2/(colour)
15.5"
48.5"
30' to 45'
●
●
POL A-3/(colour)
18.5"
58.5"
40' to 55'
●
●
POL A-4/(colour)
21.5"
68.0"
50' to 65'
●
●
POL A-5/(colour)
27.5"
86.5"
60' to 75'
●
●
POL A-6/(colour)
34.0"
106.5"
70' and >
●
* Use colour code when ordering
Lifetime Warranty
Polyform has so much confidence in its superior quality
that all Polyform products carry a limited lifetime guarantee
against splitting or bursting.
*When ordering specify colour code i.e POLA-3/IV
Polyform Mooring Buoys
Offers up to 35% more buoyancy than hard shell buoys. Features a 5/8" centre tube for maximum
strength. The mooring iron is completely powder coated with the additional protection of a vinyl coated
4-3/8" diameter eye. Soft vinyl surface will not harm boats finish. Easy to inflate or deflate for storage.
Available in two colours, Specify colour code when ordering.
Fluorescent Red- code IV, White- code II
Part #
Colour
Diameter
Circumference
Length
Buoyancy
POL CM2
(colour code)
14"
44.5"
29.2"
55 lbs.
POL CM3
(colour code)
18.5"
58.5"
35.1"
121 lbs.
SAFETY
MOORING TIP:
In a hard blow, the holding power of the mooring can be increased
by lengthening the mooring pennant. This increases the scope of the
mooring providing greater holding power – just be sure to check other
boats in the moorage first to ensure you won’t foul another moored
boat. In adverse conditions, a second mooring pennant can be run to
the top eye as a safety in case the primary pennant chafes through or
fails. All shackles should be moused to prevent opening. Electricians
plastic tie wraps are an excellent means of securing a shackle.
When picking up a mooring, always use the top ring to
pick the buoy with a boat hook. Then shackle the mooring
pennant to the mooring chain shackle, rather than to the
buoy itself. This puts all the strain on the anchor chain,
rather than the buoy
MOORING & ANCHORING
848
Mooring Buoys
Polyform CC Series Buoy
Because of the flexible centre tube, you will see the CC buoy used in a variety of applications.
They are used by longliners, fish farmers to add buoyancy to their pens, and more recently by
geophysical researchers to tow sonic cannons in search of gas and oil.
Features:
• Polyform’s unique vinyl valve system
• Reinforced flexible centre tube accommodates a 1-1/2 PVC pipe
Part #
POL CC-2/IV
Buoy Dia
Circumference
Length
Buoyancy
21.5"
44"
27.5"
187 lbs.
CC SERIES MOORING SYSTEM
When using the CC series as a mooring ball, please follow these simple instructions to achieve
the maximum use and durability of this product:
1) The CC series has a flexible centre tube. If you use a chain, you must first insert a rigid PVC
pipe. DO NOT inflate the buoy until you have inserted the pipe.
2) Lubricate with oil both the tube and the pipe prior to inserting. Make the length of the pipe so
that you have 3 inches extending beyond the top and bottom of the buoy.
3) Run a suitable size pin for your load through the top of the pipe and attach the shackle to the
chain at the bottom of the buoy.
Dockedge Mooring Buoy
Polyform Shackles
Bright orange polyethylene and filled
with closed cellular foam for long
life under the most extreme marine
conditions
• Resistant to fire, oil and gas
• Molded in UV inhibitors and fungicides
A handy addition to our A, F and
LD Series products for improved
performance in tough applications.
PVC bushing distributes load over
entire rope hold area for maximum performance and
longevity.
DOC 90-027-F
POL 50
POL 52
Mooring buoy, orange 24"
Mooring Buoy Accessories
Swivel/Rod
• Fits 1 7/8"dia. (2" nominal) collar/ spindle openings
• Galvalume has 10X the corrosion resistance of hotdipped galvanized steel
DOC 90-032-F
Mooring buoy collar
MOORING & ANCHORING
Polyform Water Ski Buoys
WS-1 slalom buoys are made from high quality PVC
and feature a strong rope hold. The WS-1 meets
American Water-ski Association specifications. Use
as boat path slalom coarse marker. Available in three
colours. 9" dia. 3/8" eye dia.
POL WS-1/IV
POL WS-1/X
POL WS-1/XI
Polyform Accessories
Swivel & rod 7.5"
Collar
• Flared Galvalume collar prevents chain wear or
chaffing
DOC 90-030-F
1-1/4", Fits: A-2, A-3, A-4
1", Fits: A-1, LD2, LD3, F-2 to F-7
Red
Yellow
Green
POL 10
POL 42
POL 20
POL PLUG
POL 30
Inflation adaptor
Quart Blue marking ink
Patching kit 1 oz tube
Spare plug for valve
Hand pump, 24 cubic inches per stroke
849
Fenders / Buoys
Kwik Tek HULL HUGR Fenders
Fend-Air Inflatable Fenders
Contour Series
Traditional round fenders roll up, leaving
boats unprotected and they’re bulky to stow.
HULL HUGR to the rescue! When boats rock,
HULL HUGR stays put. The innovative HULL
HUGR protects boats better than 6 traditional
fenders. The ingenious patented design enables
you to fold it up to a very compact size, easy
to stow, or use it as a cushion. Hull Hugr is
constructed of UV and puncture resistant
marine grade vinyl / polyester tri-laminate. Six blocks of durable
closed-cell foam are sealed inside. There are 3 sizes to fit every
boat, dock, and slip:
Manufactured of heavyduty, urethane and vinyl
coated nylon fabric for high
strength, puncture and abrasion
resistance, as well as resistant to
most petro-chemicals. Made to
the highest yacht quality standard to provide maximum protection
for your vessel while at a floating or stationary dock and while
rafted to another vessel. Stainless steel triangle ring on each end
allows the fenders to be rigged horizontally or vertically. Equiped
with a high quality inflatable boat valve for convenient inflation or
deflation for storage.
Contour Standard Fenders
• 24" Long x 6" wide x 2-1/2" thick
KWI HH-1C
KWI HH-1CB
KWI HH-1CW
Blue
Black
White
Contour Large Fenders:
• 30" Long x 6" wide x 4" thick
KWI HH-30CB
KWI HH-30CW
Black
White
Flat Series
You’ll love the protection this flat fender gives
your boat and the way it stows so compactly
under a seat or in a side compartment.
Constructed of durable marine grade trilaminate with a polycarbonate grommet at
each end. Hang them vertically or horizontally.
Great for mounting to docks and posts.
• 26” Long x 6” wide x 2 1/2” thick
KWI HH-1
KWI HH-1B
KWI HH-1W
Blue
Black
White
Dockedge Toon Fenders
DOC 53-121-F
DOC 53-124-F
DOC 53-131-F
DOC 53-134-F
6" x 24” White
6" x 24” Beige
6" x 36” White
6" x 36” Beige
10"X24" Black
10"X24" White
12"X24" Black
12"X24" White
Polyform Elite Fender Covers
Designed to cover the entire fender protecting the ends
where most UV breakdown occurs. Made of heavy duty
black polyester which resists sunlight, washing, friction
and sea water. Heavy duty elastic bands are sewn inside
the hem.
Part #
Polyform Fender
Sizes (inches)
POL EFC-1-BLK
HTM-1, G-3, G-4, F-1
5-1/2 x 20 - 6-1/2 x 25
POL EFC-2-BLK
HTM-2, G-5, F-2, F-3
8 x 20 - 9 x 30
POL EFC-3-BLK
HTM-3, G-6, F-4
9 x 41 - 10-1/2 x 30
POL EFC-4-BLK
HTM-4, F-6
12 x 34 - 12 x 43
POL EFC-5-BLK
F-5
12 x 30
Polyform
Fender Fit Series Fender Covers
• Fully protects fenders from damaging UV rays
• Eliminates the "squeak" for a peaceful morning
• Minimize hull damage from scuffs and rub marks
• Durable - made from long lasting acrylic yarn
POL FF-F-1/G-4 BLACK
POL FF-F-1/G-4 NAVY
POL FF-F-3/G-5 BLACK
POL FF-F-3/G-5 NAVY
POL FF-HTM-2 BLACK
POL FF-HTM-2 NAVY
POL FF-HTM-3 BLACK
POL FF-HTM-3 NAVY
POL FF-HTM-4 BLACK
POL FF-HTM-4 NAVY
F-1 & G-4, Black
F-1 & G-4, Navy
F-3 & G-5, Black
F-3 & G-5, Navy
HTM-2, Black
HTM-2, Navy
HTM-3, Black
HTM-3, Navy
HTM-4, Black
HTM-4, Navy
MOORING & ANCHORING
The first fender designed especially for pontoon boats. It is
designed to attach to various deck styles and contains a dual
hooking system to keep the fender from popping up and flying
around.
• PVC molded fender that comes in two lengths
• An attachment system that is adjustable so you can hook the
fender on the rail and adjust it up or down
• A bottom hook that connects to any of eight receiver
attachments that are built into the PVC fender. This hook
design will attach to the aluminum trim
around the deck of the pontoon boat
• A block of 6” x 6” EVA foam with Velcro
attached to the fender for easy adjustment
and additional protection
• Aluminum hook “STOPS” that prevent
the fender from sliding on the rub rail
• It is a complete system – there is no need
to buy extra attachment devices or rope
FEN FA-1024-B
FEN FA-1024-W
FEN FA-1224-B
FEN FA-1224-W
850
Fender Covers / Fender Holders
Dock Edge Fender Covers
Windline Stainless Steel Fender Holders
Unlike other fender covers, Dolphin covers WILL NOT absorb
water. Absorbing water loosens the fit and covers start to sag and
droop. After a few washings they fade, stretch and go out of shape,
making for a sloppy look and fit.
• Covers have an elastic top and bottom
• Include Velcro straps, so the covers will never fall off
• The stretch polyester fabric is antimicrobial, which will not
fade, mold, mildew or rot.
Constructed of solid stainless steel rod
and made to hold two fenders. Easily
adjusted to various mounting positions.
Folds away when not in use. Units fit
standard 7/8" or 1" O.D. rails.
DOC 96-556-F
DOC 96-559-F
DOC 96-552-F
DOC 96-566-F
DOC 96-569-F
DOC 96-562-F
DOC 96-586-F
DOC 96-589-F
DOC 96-582-F
5.5" x 20" Black
5.5" x 20" Navy
5.5" x 20" Royal
6.5" x 23" Black
6.5" x 23" Navy
6.5" x 23" Royal
8.5" x 27" Black
8.5" x 27" Navy
8.5" x 27" Royal
WIN FND-1
WIN FND-2
WIN FND-3
Up to 7"
7" to 9"
9" to 11"
Transat Fender Hanger
Polyform True Fit Fender Holders
As with all Polyform products, the new True Fit System offers
several unique advantages not found in other fender holders.
Because of its design and patented 360o swivel connector virtually
any spot along the bow or stern rail can become a fender
storage area. Because the fender holders and connectors
are all available separately single, double, or triple units
are easily assembled. The True Fit holders are made of
high quality stainless steel and come in three sizes.
MOORING & ANCHORING
POL TFR-170
POL TFR-230
POL TFR-280
POL TFR-360
POL TFR-402
POL TFR-404
POL TFR-403
6-3/4" Holder
9" Holder
12" Holder
14" Holder
Swivel connector, 7/8"-1" (Holder to rail)
Swivel connector, 1-1/4" railing (Holder to rail)
Parallel connector, 2/pkg, (Holder to holder)
Solid one piece plastic construction. For rope
sizes to up to 1/2” and rails up to 1”.
• Finger tip adjusting
• No moving parts - nothing to break
• Durable - high impact UV protected
• Secure - will not slide or scratch
• Flexible - 1/4” to 1/2” rope of any material
• Value - no more lost fenders
• Versatile - Use as a tarp/load tiedown
TSM FH01
Sea-Dog Nylon Fender Mate
The latest in fender brackets made of white
marine grade reinforced nylon. Clamps
securely onto both 7/8" and 1" round
tubing and 3/16" and 1/4" life line cable.
Unique double locking action, locks clamp
onto rail or wire and still allows full adjustment of the height of the
fender. When the proper height is reached, the final locking action
clamps the rope quickly and securely.
SED 327200-1
True Fit Fender Holders Kits
Sea-Dog Fender Hooks
Patented 360 swivel connectors allow any spot on the bow or
stern rail to become a fender storage area.
Kit comes with (2) baskets, (3) TFR402
Swivel Connectors and (1) pair of TFR403
Parallel Connectors. The True Fit holders
are made of high quality stainless steel and
the kits come in two sizes. Easy to add on
additional holders.
Chrome plated cast brass or stainless
steel with spring closure hook for
quick fender attachment.
• Fasteners: #8 FH
o
POL TFR-170-2
POL TFR-230-2
6-3/4"
9"
A
B
C
Material
SED 672410
Part #
1-5/16"
5/16"
1"
S/S
SED 672510-1
1-5/16"
5/16"
1"
Chromed
SED 672520-1
1-1/4"
7/16"
1-5/16"
Chromed
► Also See:
Clam Cleats pg 773
Fender Holders
Sea-Dog Rail Mount Fender Holder
Scotty Fender Holders
Injection molded nylon and stainless steel. Loopstyle clam cleat allows for easy attachment and
adjustment of fenders using up to 1/4" line. Easily
attaches to 7/8" - 1" tubing.
Quickly and easily remove or reposition your
boats fenders. Fits into all Scotty post rod holder
mounts. Will accommodate rope up to 7/8"
diameter.
SED 327110-1
SCO 327
Perko Snap Type Fender Hook
Chrome plated zinc. For rope up to 1/4".
• 2/pkg
• Plate size 1-9/16" x 1-3/8"
PER 1309-DP-CHR
Perko Fender Lock
Chrome plated zinc. Eye is permanently
attached to fender for quick and easy installation.
• 2/pkg
• Flange diameter: 1-1/2"
• I.D. of eye 3/8"
PER 1299-DP-CHR
PER 1299-DP-99A
Spare eye 2/pkg
Perko Fender Hook
Chrome plated zinc. For rope up to 3/8".
• 2/pkg
• Plate size 1-3/4" x 1-1/4"
PER 1246-DP-CHR
BoatMates Fender Cleats
Quickly secure fenders with a lift and turn
of the S/S cleat. Accommodates up to 3/8"
line.
• Length: 3-3/4"
BOT 2201-2
Davis Fender Tender II
DIN 393
Davis Instruments Python
Attaches universally onto stanchions and
railings. The Python makes it easy to adjust
the line length for proper dock fender height.
Use with 1/2" and 3/8" line. Whether vertical,
angled or horizontal the Python grips like no
other product on the market. Glass reinforced
with UV resistant nylon for longevity and outstanding strength.
DIN 1475W
DIN 1476W
7/8" rail, white
1" rail, white
2/pkg
Taylor Fender Lock
This stainless steel low profile fender
lock base makes hanging fenders fast
and easy.
TAY 1010
Stainless
Parts:
TAY 1009
Locking peg
Garelick Handy Securing Straps
Quick and easy to use. Closes or opens with
simple turn snap. Ideal for holding all types
of gear. Strap is strong, mildew proof white
vinyl with plated brass swivel fasteners.
• 2/pkg.
GAR 71077
GAR 71069
Moveable
Fixed
BoatMates Rail Clips
A convenient way to hang fenders, fender boards,
bait buckets, etc. Snaps easily over 7/8" and 1"
diameter rails. 2/pkg.
BOT 2106-1
White
Garelick Fender Height Adjuster
• Raises or lowers boat fenders with ease.
• Automatically locks in place at desired
height
• Eliminates tying and untying fender lines
• Simple locking lever lets line slide down
and lock in place
• Handles: Hollow braid lines up to 1/2”
(1cm) diameter solid braid lines up to 3/8” (1cm) diameter
• Tough glass reinforced nylon
• Rust free brass serrated locking ball
GAR 71080
For rails and life lines. Vinyl strap with easy on-off snap.
BoatMates Fender Hanger
A convenient way to hang fenders, fender
boards, bait buckets, etc. Snaps easily over 7/8"
and 1" diameter rails. 2/pkg.
BOT 2102-1
White
MOORING & ANCHORING
Clip your fenders to rails, lifelines, side wing
windows or cleats. Simplify the handling
and relocation of boat fenders. Easy to adjust
with no more knots. Made of sun-resistant
white plastic.
851
852
Fender Lines / Dock Bumpers
Dock Edge MFP Fender Lines
• Strong and float along the surface of
the water
• Can be used for twin eye or centre
hole fenders
• Are easily adjustable and will
remain soft and pliable
• 2/pkg
DOC 91-566-F
DOC 91-569-F
DOC 91-561-F
DOC 91-576-F
DOC 91-571-F
3/8" x 5’ Black
3/8" x 5’ Navy
3/8" x 5’ White
3/8" x 8’ Black
3/8" x 8’ White
Performance Ropes
Dual Braid Nylon Fender Lines
• 100 % nylon
• Resistant to rot, gasoline and most
chemicals
• Good UV resistance
• Complete with 12" eye
• Whipped at splice and bitter end
• Blister packed
PRS FL-1/4X6-BK
PRS FL-1/4X6-NB
PRS FL-1/4X6-GW
PRS FL-1/4X6-WH
Black (74013)
Navy (74017)
Gold (74003)
White (74005)
PRS FL-3/8X6-BK
PRS FL-3/8X6-GW
PRS FL-3/8X6-NB
Black (74057)
Gold (74047)
Navy (74061)
PRS FL-5/16X6-BK
PRS FL-5/16X6-GW
PRS FL-5/16X6-NB
Black (74037)
Gold (74027
Navy (74041)
BoatMates Double Rail Clips
Here’s a quick, portable solution for hanging
a couple of extra dock lines, wet bathing suits,
towels, etc. Fits 7/8" and 1" rails, and stows
away when not in use. Great for hanging shore
power cords, or water hoses.
MOORING & ANCHORING
BOT 2108-1
White
Hand Held Rope Reels
A convenient way to store,
protect and dispense rope,
twine, electrical wire or
extension cords. Great for
homes, shops, marinas, boats, RV's, etc.
TOO K-100
TOO KW-130
Astro Nautics Dock Wheel
Heavy duty dock wheels designed to protect your boat. The wheels
are constructed using extra thick white vinyl that is durable and will
not scuff boat surfaces. The side mount brackets are pre-drilled and
have a galvanized finish.
Dia
Mount
AST DW41090
Part #
10"
Universal
AST DW41160
10"
Corner
AST DW41490
14"
Side
AST DW41493
14"
Corner
Dock Edge Corner Bumpers
Protect your vessel from damaging impact with
dock corners. This air-filled bumper is constructed
from nylon reinforced vinyl and features a builtin air valve for inflation or deflation if necessary.
Comes with stainless mounting screws.
• 9" x 9" x 3-5/8"
DOC 1057 1-F
DOC R1034
Keep shore power cords, water hoses, TV and
phone cables off the deck, and organized while
in port. Holds power cords, two hoses, plus
communications cable. Keeps decks free of
clutter and makes getting underway quicker.
Fits 7/8" and 1" rails.
BOT 2104-1
White
White w/ header card
White bulk
Dock Edge Dock Wheels
These heavy duty wheels measure 24”
in diameter, have an 8” tread width,
700 lb capacity and are roto-molded
from polyethylene and UV stabilized.
Rolls easily over virtually any terrain and will not rust on the axle.
Suitable for roll-in docks or boat lifts, they are easily mounted on a
1-1/2” OD axle.
DOC 90-024F
BoatMates Rail Line Organizer
Standing rope reel
Hand-held rope reel
Each
Dock Edge Torpedo Bumpers
These large, durable bumpers add an
attractive and functionally rugged
cushion to the leg pipes of your
docking system. Fabricated from
quality marine vinyl, each weighs
2.7 lbs and measures 18” tall with a
diameter of 5”. Place them on dock
leg pipes over the mounting brackets
to prevent damaging your watercraft
on protruding bolts.
DOC 91-110-F
DOC 91-114-F
White
Beige
854
Dock Bumpers
Dock Edge Air Cushion Bumpers
Constructed of marine grade flexible PVC they will not chip or crack and are
unaffected by oil, gas or saltwater. Air trapped inside these profile cushions impact
just like a pressurized fender. Easily installed on any horizontal or vertical surface.
Large “P” section with large air volume provides excellent protection. Use large
corners, end plugs and connectors. White. 8' length’s.
DOC 1001-F
DOC 1002-F
DOC 1004-F
Single 'P' Double 'D' Single 'D' White
White
White
Air Cushion Connectors
Connect the above Air Cushion Profiles with DOCK EDGE +
connectors, corners and end plugs for the Air Cushion System.
DOC 1026-F
DOC 1027-F
Large end plug, 2 per pack
Small end plug, 4 per pack
DOC 1028-F
DOC 1029-F
Large connector, 2 per pack
Small connector, 4 per pack
DOC 1048-F
DOC 1049-F
Large corner, 2 per pack
Small corner, 4 per pack
Stainless steel mounting screws with square head driver.
DOC 1006-F
100/pkg
Full Face Bumpers
Constructed of marine grade PVC and are unaffected by oil, gas or saltwater,
these units are ideal for larger applications, this profile provides extra strength
and security against damage to boats or property. Double internal channels with
cross girder adds additional protection from impacts and provides a large contact
area. 8' lengths.
DOC 1104-F
DOC 1106-F
White full face
White slant 'P'
Polyform Dock Moldings
MOORING & ANCHORING
Manufactured from the best available marine grade vinyl. Reinforcement ribs in the PG-1, 2, &
3 to provide added protection to both your boat and dock. They are easy to mount and are built
to withstand the harsh marine environment using the correct additives to keep them soft and
resistant to UV breakdown for years. The result is a product you can depend on when things
don’t go as planned.
POL PG-1
POL PG-2
POL PG-3
POL PG-4
10" 18" 10' 6' Dock corner
Straight bumper
Vinyl extrusion
Vinyl extrusion
Dock Bumpers / Dock Lighting
Dock Edge Mooring Whips
Dock Edge
HD “P” Profile Dock Edge
This exceptionally strong Profile is further
reinforced by internal support. like all
DOCK EDGE + Profiles, it is constructed
of marine grade flexible PVC, developed
not to chip or crack under normal usage.
Unaffected by oil, gas or salt water. UV
and Fungus Inhibitors prevent fading, yellowing, deterioration
from sunlight and unsightly blotching.
DOC 1200-F
855
8' white
Perimeter Dock & Post Bumpers
Constructed with a heavy-duty polyester fabric
encasement these bumpers are guaranteed
not to deteriorate in the sun or mar your boat.
The specially formulated closed cell inner
cushion provides superior and long-lasting
impact protection for your boat. The flexible
construction allows vertical, horizontal,
rounded or flat surface installation. Tab system
allows standard "top of dock" or unique
"fold-over" mounting which conceals the
top row fasteners and allows quick and easy
installation with nails, staples or screws.
Fibreglass mooring whips are
exceptionally strong, attractive, and
do not obstruct your view. Each whip
mounts with a cast aluminium, powder
coated base with built-in cleats. These
whips act as a spring to maintain your
boat at a safe, convenient distance from the dock. Complete with
double braided nylon whip lines, spring lines, and stainless steel
mounting hardware. Some mooring areas may be too rough for
any type of tie-up system. Weight is more critical than boat length
when selecting the correct size of the whip.
DOC 3200-F
DOC 3400-F
DOC 3600-F
8' for boats up to 18' and/or 2500 lbs
12' for boats up to 23' and/or 5000 lbs
14' for boats up to 28' and/or 10,000 lbs
The exclusive Plug & Socket Design on these whips
was developed by DOCK EDGE for quick and easy
separation, allowing for convenient storage.
DOC 3000-F
Mooring whip base
Dock Edge Solar DockLite
Diameter
Length
PMP DB3.30
2-1/2"
3'
PMP DB3.60
2-1/2"
6'
PMP DB3.90
2-1/2"
9'
Easy to install. Its durable, weatherproof,
low profile construction makes it an
attractive and functional addition to docks,
walkways, decks and landings. Ideal for
illuminating trouble spots on pathways or
transition areas such as from dock to shore.
With extended duty solar charged batteries the DockLite will last
until sunrise. Automatic on-at-dusk.
• L: 11cm x W: 10cm x H: 2cm
PMP DB4.30
3-1/2"
3'
DOC 96-255-F
PMP DB4.60
3-1/2"
6'
PMP DB4.90
3-1/2"
9'
No.
Perimeter Gunnel Guards
PMP GG1.5HR.50 1/2" round, 50'
PMP GG1.5HR.CU 1/2" round, cut length
PMP GG1.53Q.50 3/4" round, 50'
PMP GG1.53Q.CU 3/4" round, cut length
Easy to install. Its durable, weatherproof low
profile construction makes it an attractive
and functional addition to docks,
walkways, decks and landings. Ideal for
illuminating trouble spots on pathways
or transition areas such as from dock to
shore. With extended duty solar charged
batteries the DockLite will last until
sunrise.
• Automatic on-at-dusk
• Replaceable batteries
• 10cm x 10cm x 2.5cm
DOC 96-257-F
Dock Edge Solar Light & Cleat
Mounted on top of a sturdy steel base,
housed inside an attractive, Colonial style
12” tall, 4” wide vinyl pillar. Easy to
install and NO WIRES. These decorative
and functional dock accessories will add
style to your dock day or night. The lamp
is designed to illuminate your boat, dock
and stainless steel cleat, and not shine in
your eyes. Each kit includes, pillar, stainless steel cleat, mounting
base, solar light and rechargeable batteries.
DOC 96-250-F
MOORING & ANCHORING
Constructed with a heavy-duty polyester fabric
encasement these bumpers are guaranteed
not to deteriorate in the sun or mar your boat.
Because of this construction, Perimeter's
Gunnel Guard lasts more than 10 times longer
than similar cotton canvas guards currently on
the market. The gunnel guard's 3/4" tabs are
slightly larger than other similar products on
the market which allows easier attachment
with screws and washers.
Dock Edge Solar Pro DockLite
856
Dock Ladders / Dock Cleats
Dock Edge Dock Ladder
Dock Edge Classic Dock Cleats
Constructed with heavy-duty 1-7/8" galvalume tubing and finished
with a white polyester powder coating. These ladders have a
hinged design that allows the ladder
to conveniently flip out of the water
when not in use. Locks securely in
both positions so it will not swing
when in use or accidentally lower
when in the raised position. Unique
hinge design has no pinch points
for safety and is quickly and easily
assembled with stainless steel
hardware included.
• 23" x 25" x 4.25"
Made from marine grade aluminum and
powder coated white.
• Use hex head bolts
DOC 2113-F
3-step
Tie Down Engineering Dock Ladders
This galvanized steel dock ladder is available in
3-step and 4-step models. Add the optional speed release to make
for easy removal when not in use.
TIE 28273
TIE 28274
TIE 27271
MOORING & ANCHORING
These innovative 6" x 3-3/4" cleats fold down to a low profile base
with smooth, rounded surfaces and conveniently flip up for easy
use. Also useful for replacing conventional
cleats on decks of houseboats and pontoon
boats. Made from marine grade aluminum
with optional powder coated white. Use
3/8" carriage bolts.
Sea-Dog Open Base Flat Head Cleats
• Galvanized iron
• A sturdy cleat
Part #
A
B
C
D
Fastener
SED 040103
3.5"
1"
13/16"
1-5/8"
#8 FH
SED 040104
4"
1-1/8"
7/8"
1-7/8"
#10 FH
SED 040105
5"
1-5/16"
1-1/16"
2-3/16"
#12 FH
SED 040106
6"
1-3/8"
1-1/4"
2-3/16"
1/4" Bolt
SED 040106-1
6"
1-3/8"
1-1/4"
2-3/16"
1/4" Bolt
SED 040108
8"
2-1/8"
1-11/16"
3-1/4"
5/16" Bolt
SED 040108-1
8"
2-1/8"
1-11/16"
3-1/4"
5/16" Bolt
SED 040110
10"
2-1/2"
2-3/8"
4-1/16"
3/8" Bolt
SED 040112
12"
2-7/8"
3-3/8"
5-1/2"
3/8" Bolt
SED 040114
14"
3-1/2"
4-1/4"
6-1/8"
1/2" Bolt
Sea-Dog Open Base Hex Head Cleats
Galvanized iron. A sturdy cleat. Ideal for deck or dock use.
Part #
A
B
C
D
Fastener
SED 040208
8"
2-1/8"
1-11/16"
3-1/4"
5/16" HH
SED 040210
10"
2-1/2"
2-3/8"
4-1/16"
3/8" HH
SED 040212
12"
2-7/8"
3-3/8"
5-1/2"
3/8" HH
SED 040214
14"
3-1/2"
4-1/4"
6-1/8"
1/2" HH
Aluminum finish
Powder coat finish
Dock Edge Flip Up Dock Cleat/Rings
Where safety is a concern this 3-1/2" x 2-1/4" cleat has the answer.
A fold down, low profile cleat that conveniently flips up for easy
use. All surfaces are smooth and rounded. Made from marine grade
aluminum with optional powder coated white.
• Use 3/8" carriage bolts
DOC 2603P-F
DOC 2603W-F
4-1/2" x 2" Cleat
8" x 4" Cleat
3-step ladder
4-step ladder
Speed release
Dock Edge Flip Up Classic Dock Cleats
DOC 2606P-F
DOC 2606W-F
DOC 2504W-F
DOC 2508W-F
Aluminum finish
Powder coat finish
► Also See:
Deck Cleats pg 242
857
Dock Cleats / Anchors
Tie Down Super Hooker Anchors
Sea-Dog Dock Cleats
• Galvanized iron
Part #
A
B
C
D
Fastener
The Super Hooker is an
economical anchor. It is
a good choice for less
demanding anchoring
situations. Super Hooker
anchors are well made,
strong, and have a hotdipped galvanized finish.
SED 040808
8"
2-3/4"
2"
4"
1/2" HH
SED 040810
10"
3-1/2"
2-1/2"
4-13/16"
1/2" HH
SED 040812
12"
3-3/4"
3-7/16"
7"
5/8" HH
SED 040815
15"
4-1/2"
3-1/2"
7"
3/4" HH
Part #
SED 040818
18"
5-1/8"
3-7/8"
7-1/2"
3/4" HH
TIE M-4S
lbs
A
B
C
Holding
Power
4
19-1/2"
10-1/2"
14-3/4"
240 lbs
TIE M-8S
9
24"
12"
18-1/4"
480 lbs
TIE M-13S
14
28-1/4"
14-1/4"
21-1/2"
740 lbs
TIE M-18S
18
31-3/4"
16-1/2"
24"
1050 lbs
TIE M-22S
25
35"
19"
26-3/4"
1300 lbs
Dock Edge EZE Docker
One piece, spring operated portable mooring
ring which simplifies a boaters docking
problems. Simply insert the EZE Docker
between the dock planks - press down - and
turn 90º. All steel construction, zinc plated for protection against the elements.
• Length: 6-1/4" x Eye: 1-1/4"
DOC 2701Z-F
2/pkg
Danforth Standard Anchors
The Standard anchor has the traditional good holding power which has
always been associated with Danforth anchors. The shank is made of
high strength steel. The steel flukes are strong and wide. Each anchor
has a hot dipped galvanized coating for long-lasting protection.
Part #
Holding Power (lbs)
Weight (lbs)
Boats to
Chain & Diameter
A
B
C
DAN S300
300
5
17’
3’ - 3/16”
DAN S600
600
9
27’
3’ - 3/16”
19-1/2”
14-3/4”
10-1/2”
24”
18-1/4”
12”
920
14
31’
4’ - 1/4”
28-1/4”
21-1/2”
14-1/4”
DAN S1300
1300
16
36’
4’ - 3/16”
31-3/4”
24”
16-1/2”
DAN S1600
1600
25
40’
5’ - 5/16”
35"
26-3/4”
19”
DAN S2000
2000
43
45’
6’ - 3/8"
40-1/4”
31”
22”
DAN S3000
3000
70
55’
8’ - 1/2”
50”
38”
26-1/2”
DAN S3500
3500
100
60’
5’ - 5/8”
54”
41”
28-3/4”
Danforth Anchor Selection
The selection of the proper anchor for your requirements depends strictly on holding power, because holding
power is the only true measure of an anchor's ability to hold your boat. Be sure then, before you consider weights,
sizes, styles, shapes or materials of construction, that you know what holding power you need and what holding
power each anchor offers. All Danforth anchors have holding power ratings on their labels.
MOORING & ANCHORING
DAN S920
858
Anchors
Fortress Anchors
Fortress Guardian Anchors
The Fortress is widely regarded as the most
effective, most efficient anchor on the market today.
Rather than depending upon weight, Fortress's
large fluke areas, precision machined shape, and
accurate fluke-shank pivot angles allow it to readily
penetrate the sea bed and bury itself deeply, to
provide unparalleled security at minimum weight.
Completely rustproof, the Fortress is made of
hardened high tensile strength anodized marine
grade aluminum - magnesium alloy which has
the strength of steel but at only half the weight. Can be easily
disassembled for compact stowage, or for parts replacement.
• Lifetime parts replacement warranty
The Guardian is the utility anchor from Fortress.
Guardian represents an excellent value for boaters
who do not require the ultimate performance
of Fortress, yet want the security of a quality,
dependable, lightweight anchor. The Guardian is
fully machined - no welds - out of hi-tech aluminum
alloy and can be easily disassembled for compact
stowage or for parts replacement.
• One year parts replacement warranty
Working
Load lbs
lbs
A
B
C
Boat
Length
FOR FX-7
700
4
24"
14"
19"
16-27'
FOR FX-11
900
7
27"
16"
22"
26-32'
FOR FX-16
1250
10
31"
18"
25"
33-36'
FOR FX-23
2000
15
36"
21"
29"
39-45'
FOR FX-37
3000
21
40"
24"
32"
46-51'
FOR FX-55
4000
32
43"
27"
37"
52-58'
Part #
Part #
lbs
A
B
C
Boat Length
FOR G-5
2.5
19"
11"
16"
12-16'
FOR G-7
4
22"
13"
18"
17-22'
FOR G-11
6
25"
15"
20"
23-27'
FOR G-16
7
29"
17"
23"
28-33'
FOR G-23
13
33"
19"
28"
34-41'
Boat size recommendations are for boats of average windage and
proportions in 30 knots of wind, average bottom conditions, and moderate
protection from open seas. Remember that the loads in 42 knots of wind
are twice as much as in 30 knots.
Use three-strand nylon rope, 6-12 ft of chain and a minimum of 5:1 scope.
Also, a minimum of 6 ft of chain should be used for every 25 ft of water
depth. For storm conditions use an anchor one or two sizes larger.
Transat ‘Bruce’ Style Anchors
An excellent quality, highly polished, stainless steel or galvanized steel ‘Bruce’ style anchor.
Stainless
Galvanized
Weight
Kg
A
B
C
D
Recommended
for boats to:
MOORING & ANCHORING
TMS Q91002S
-
2
13.5
5.5
8.25
7.5
20'
TMS Q91005S
TMS Q91105G
5
18.5
9
11
12.5
26'
TMS Q91007S
TMS Q91107G
7.5
20
10
11.5
14.5
30'
TMS Q91010S
-
10
23
11.5
12.5
15.5
33'
-
TMS Q91113G
13
TMS Q91015S
TMS Q91115G
15
26
14.5
14.5
17
38'
TMS Q91020S
TMS Q91120G
20
28
15.5
16
19
44'
TMS Q91030S
TMS Q91130G
30
30
16
17
22
50'
-
TMS Q91150G
50
32
20
27
20
-
859
Anchors
Anchorlift
Pro Plow Stainless Steel Anchors
Kingston QuickSet Anchors
Shark series anchors are exceptionally
effective in a variety of sea beds. Work very
well with Anchorlift bow rollers, which give
you a self launching system. Release the
anchor without the need to leave the controls.
Remains stable in various tidal conditions.
High polished stainless steel (ASI316).
Part #
Size
Boat Size
AxBxC
ALF RSA6
6KG
to 25'
23 x 33 x 57 cm
ALF RSA8
8KG
to 30'
26 x 37.5 x 63 cm
ALF RSA10
10KG
to 40'
29 x 42 x 70 cm
This patented design includes lateral fins
that trip the anchor resulting in the fastest
setting anchor. The cylindrical shaped
flukes bury deeply for high holding
power, and the fins also stabilize the
anchor preventing premature break-out.
The shank is designed to smoothly enter
a roller and the weighted ballast ensures
that the anchor will self-launch. High tensile steel is used in the
shank, and the anchor is hot dip galvanized to ensure long lasting
corrosion protection.
Part #
Weight
Working
Load
Fluke
Length
Width
Overall
1000 lbs
15.75"
12"
27"
13"
31.25"
ALF RSA15
15KG
to 45'
32 x 45 x 75 cm
KIN QS-14
14 lbs
ALF RSA20*
20KG
to 55'
34 x 50 x 82.5 cm
KIN QS-22
22 lbs
1500 lbs
17.25"
ALF RSA30*
30KG
to 65'
38 x 57 x 95 cm
KIN QS-35
35 lbs
2500 lbs
21.25"
15"
35.5"
KIN QS-50
50 lbs
3500 lbs
24.5"
16.5"
38.25"
*Request Items
Kingston Plow Anchors
The plow anchor is the most popular
anchor for lake and seagoing yachts,
and is the most widely recommended
type of anchor. They dig in quickly and hold well in all types of
bottom. Manufactured to tight quality control standards, ensuring
that each anchor is properly balanced and has the correct angle.
They are hot dip galvanized to ensure long lasting corrosion
protection.
Anchorlift
Pro Plow Galvanized Anchors
Shark series anchors are exceptionally effective
in a variety of sea beds. Work very well with
Anchorlift bow rollers, which give you a self
launching system. Release the anchor without
the need to leave the controls. Remains stable in
various tidal conditions. Hot dipped galvanized.
Part #
Part #
Size
Boat Size
AxBxC
ALF SA6
6 kg
to 22'
23 x 33 x 57 cm
ALF SA8
8 kg
to 28'
26 x 37.5 x 63 cm
ALF SA10
10 kg
to 35'
29 x 42 x 70 cm
ALF SA15
15 kg
to 40'
32 x 45 x 75 cm
ALF SA20
20 kg
to 50'
34 x 50 x 82.5 cm
ALF SA30
30 kg
to 60'
38 x 57 x 95 cm
Weight
Fluke
Width
Overall
KIN K-20
20 lbs
16"
11"
33"
KIN K-27
27 lbs
16.5"
12.5"
33"
KIN K-35
35 lbs
18.5"
14.5"
39"
Boat Length in feet
Anchor Type
Quickset
Plow
Chain
Shackle
Nylon
Rode
Size
Length
QS-14
3/8"
1/2"
1/4"
6'
QS-22
7/16"
1/2"
3/8"
6'
QS-35
7/16"
5/8"
3/8"
8'
QS-50
1/2"
3/4"
7/16"
8'
K-20
5/16"
7/16"
1/4"
6'
Model
10
20
30
40
50
60
K-27
3/8"
1/2"
5/16"
6'
K-35
7/16"
1/2"
3/8"
7'
MOORING & ANCHORING
Kingston Anchors
860
Anchors
Greenfield Products Mushroom Anchor
Greenfield Slip-Ring Anchors
Heavy no-mar plastisol protectant coating.
Colour: Black
GRN 515-B
Made of solid steel. Selfreleasing, lightweight,
easy to store & coated
with no-mar resistant
plastisol finish protectant.
lbs
Boat
Size
GRN 669-6B
6
GRN 669-6W
6
GRN 669-6Y
Part #
Greenfield Products River Anchors
Colour
A
B
C
18'
Black
19"
18"
13-1/2"
18'
White
19"
18"
13-1/2"
6
18'
Yellow
19"
18"
13-1/2"
GRN 669-11B
11
22'
Black
23"
19"
17"
GRN 669-11-R
11
22'
Blue
23"
19"
17"
GRN 669-11W
11
22'
White
23"
19"
17"
GRN 699-11Y
11
22'
Yellow
23"
19"
17"
Sea-Dog Slip-Ring Anchors
MOORING & ANCHORING
Boat (ft)
A
B
C
4 lbs
8 - 12
14
12
9
SED 317707
5 lbs
12 - 15
17
13
9-1/2
SED 317710
6 lbs
15 - 18
20
16
10
SED 317713
8 lbs
18 - 20
24
22
11-3/4
SED 317715
9 lbs
20 - 22
24-1/2
22
14-1/2
WES .7KG
WES 1.5KG
WES 2.5KG
WES 3.2KG
WES 4.0KG
WES 6.0KG
1.5 lb
3 lb
5 lb
7 lb
9 lb
13 lb
Up to a 7' boat
Up to a 10' boat
Up to a 13' boat
Up to a 16' boat
Up to a 18' boat
Up to a 22' boat
14 lbs, boats to 16'
20 lbs, boats to 22'
30 lbs, boats to 24'
Greenfield Products Wave Stake Anchors
Black plati-coated steel anchor can be broken
down and stored in the provided bag.
12 lbs
18 lbs
Classic navy style anchor. Heavy no-mar
plastisol protectant coating. Colour: Black
Weight
Galvanized cast folding anchors. Inexpensive and
easy to store, these folding anchors make an ideal
back up anchor on larger boats and can be used
as a primary anchor on smaller boats, sailboats
and inflatables. Takes a 1/2" line through the eye.
GRN 514-B
GRN 520-B
GRN 530-B
Greenfield Products Navy Anchors
SED 317705
Galvanized Folding Anchors
Designed for river and mud bottom lakes.
Great for pontoon and bass boats. Heavy
no-mar plastisol protectant coating.
Colour: Black
GRN WAVE-12-B
GRN WAVE-18-B
Specifically designed for use in rocky bottoms or
where anchorage may be snag-filled or unfamiliar
to the boater. The design of the anchor is such that
if the anchor should snag, the
boat may be manoeuvred over
the anchor allowing the slipring to slide down the shank
so the anchor will be drawn
out backwards. The Slip-Ring
Anchor is not designed for
use in unattended moorage
where tide or wind directional
changes may occur, yet is
ideal for use as a lunch hook.
Part #
15 lbs, boats to 16'
GRN 910-B
GRN 915-B
GRN 920-B
GRN 928-B
10 lbs, boats to 14'
15 lbs, boats to 18'
20 lbs, boats to 24'
28 lbs, boats to 28'
Greenfield Products Ritcher Anchors
This anchor combines the penetration of
a grapnel anchor, the easy retrieval of a
slip ring anchor and the weight of a river
anchor. Designed for use in all weather
conditions and bottom conditions. Heavy
no-mar plastisol protectant coating.
Colour: Black
GRN 614-B
GRN 618-B
GRN 625-B
14 lbs, boats to 18'
18 lbs, boats to 22'
25 lbs, boats to 26'
Anchors / Bow Rollers
Tie Down Hooker Anchor Kits
These complete anchor kits include
a 3/8" x100' nylon anchor line with
thimble and two 5/16" shackles. All the
parts are display packaged.
• One 10HQ, 5# quick set anchor • 1/4" x 4' galvanized chain
Anchorlift Stainless Steel Bow Rollers
95090
High quality rollers designed universally for easy mounting on
most bows. Made in stainless steel with a low profile design.
Hinged with an inner roller for self launching operation.
TIE 95090
• One #8 Super Hooker anchor
• 1/4" x 6' galvanized chain
861
Part #
95095 / 95100
TIE 95095
• One #13 Super Hooker anchor
• 1/4" x 6' galvanized chain
TIE 95100
LxW
Anchor Size
ALF 90102
16.9" x 3"
to 33lbs (15kg)
ALF 90103
23.2" x 3.5"
to 44lbs (20kg)
ALF 90104
29.5" x 3.5"
to 66lbs (30kg)
Sea-Dog Seahook Bow Roller
Scotty Anchor Kit
• 50' (15m) premium nylon line
• 1.5 lb (0.6 kg) Folding Anchor
• Watertight buoyant container - doubles
as a bailer
• Nylon snap hook, for easy attachment
to vessel
• For still water use
SCO 797
Scotty Anchor Accessory Kit
Includes the #797 Anchor Kit, #276
Anchor Lock. Accessory kit also
includes a reusable nylon mesh bag.
• 304 stamped stainless steel
• Fits most welded steel Danforth style anchors
SED 328054
Bow roller
Parts:
SED 328059-1
Replacement wheel
Sea-Dog Bow Roller
SCO 798
Kwik Tek Folding Anchor System
Sea-Dog Bow Roller
KWI A-2
Greenfield Products Grapple Buddy
• Galvanized steel
• Complete with 50’ nylon line
• Height: 8-3/4” x Width: 8”
GRN GB-G
• 304 stamped stainless steel
SED 328052
Bow roller
Parts:
SED 328059-1
Replacement wheel
MOORING & ANCHORING
Designed for all boat types this 3-1/3 lb 4-fluke
folding anchor will hold in mud, sand, gravel
and rock. The anchor is coated to protect
finishes and is kept in a durable padded nylon
storage case. The 25' long marine-grade rope, with an in-line buoy,
is spliced to the anchor and a heavy-duty stainless steel snap hook.
• Investment cast stainless steel
SED 328050
862
Anchor Rollers
Sea-Dog Bow Roller
Windline Stainless Steel Anchor Rollers
Windline anchor rollers are made of the finest marine grade
stainless steel with electro-polished finish. The roller wheels
are hand-casted from Marithane which is a space-age elastomer
unmatched in its resistance to wear, distortion, and the elements.
The wheel will not wear or chafe chain or rope.
• 304 stamped stainless steel
SED 328053
Bow roller
Parts:
SED 328059-1
Replacement wheel
Sea-Dog Bow Roller
Small platform anchor roller. For boats 18 - 30' with anchor
platform or bow planks. Handles anchors up to 20 lbs. with rope to
1/2" and chain to 3/8". Pre-drilled for 3/8" fasteners.
WIN AR-4
• Electro-galvanized steel
• Lift & lock anchor roller
• Use #10 RH fasteners
SED 328040-1
Sea-Dog Medium Anchor Bow Roller
Medium platform anchor roller. For boats 28 to 48' with anchor
platforms or bow planks. Handles anchors from 20 to 50 lbs. with
rope to 1-1/2" and chain to 1/2".
Pre-drilled for 3/8" fasteners.
WIN AR-5
• 304 stamped stainless steel
SED 328064
Bow roller
Parts:
SED 328069-1
Replacement wheel
Sea-Dog Replacement Wheels
MOORING & ANCHORING
Medium fairlead anchor roller. For boats 20 - 45'. Will handle
anchoring gear with rope to 1" and chain to 3/8".
Pre-drilled for 3/8" fasteners.
• Centre: 1/2" ID
• Natural rubber wheels
Part #
A
B
SED 328059-1
1-3/4"
2-1/2"
SED 328069-1
2-15/16"
2-3/4"
SED 328079-1
3-3/8"
3"
WIN AR-7
Plow Anchor roller/mount. For sail or power boats 25' - 75'.
Securely stows plow-type anchors weighing 20 - 60 lbs. With rope
to 1-1/2" and chain to 3/8". No mounting holes.
WIN CRM-1
Anchor Rollers
Windline Stanchion/Rail Mount Anchor Brackets
Universal anchor roller/mount. For sail and power boats
25 - 54'. For plow-type anchors 25 - 45 lbs and most sizes of
pivoting fluke Danforth anchors using rope to 1-1/2" and chain to
1/2". No mounting holes.
WIN URM-1
Small anchor roller/mount. Ideal for small sail or power boats. For
Danforth anchors 5 - 13 lbs. Accommodates rope to 1" and chain to
3/8". Pre-drilled for 3/8" fasteners.
WIN URM-2
863
Windline Stainless Steel Anchor Rollers
Bruce /Stingray anchor roller/mount. For sail or power boats 9' 30'. Handles Bruce anchors up to 16.5 lbs. using chain or rope to
3/8". Pre-drilled for 3/8" fasteners.
WIN BRM-2
Bruce / Stingray anchor roller/mount. For large boats with Bruce
anchors 22 to 66 lbs. Holds rope to 1-1/2" and chain to 1/2". The
sliding wheel locks the anchor flukes against base without clamps
or pins. Pre-drilled for 1/2" fasteners.
WIN BRM-3
Bruce / Stingray anchor roller/mount. Unit firmly secures the Bruce
22 lb anchor to eliminate movement while underway. Holds rope
to 1-1/2" and chain to 1/2". Pre-drilled for 3/8" fasteners.
WIN URM-3
WIN BRM-4
Medium anchor roller/mount. For sail or power boats to 35'.
Handles Danforth anchors 13 - 28 lbs. Holds rope to 1-1/2" and
chain to 1/2". No mounting holes. Ideal for use where deck space
is limited.
Stern fairlead anchor roller. Designed for stern use, where the line
usually leads sharply to one side or the other. The movable bail
secures chain to 3/8" and line to 1". Pre-drilled for 3/8" fasteners.
WIN URM-4
WIN DR-1
MOORING & ANCHORING
Large anchor roller/mount. For sail or power boats 25 - 54'.
Securely stows Danforth anchors 12 - 60 lbs. Holds rope to 1-1/2"
and chain to 1/2". No mounting holes.
864
Anchor Rollers
Windline Marithane Wheels
Kingston Pivoting Anchor Roller
Rollers are hand-casted from an elastomer
unmatched in its ability to resist wear and
distortion. Self lubricating bushings.
WIN W-25
WIN W-30
WIN W-40
Kingston Quick Set Rollers
The BR-21 is a pivoting anchor roller designed for use with a
windlass, allowing the anchor to self-launch. Two pivot points
let you control the roller extension and the stowed position of the
anchor.
KIN BR-21
Kingston Bruce Anchor Roller
The QR-20 is a heavy duty anchor roller designed for QuickSet
anchors up to 45 lbs. It is made out of heavy plate stainless. Three
pin positions are provided for securing the anchor when stowed.
The QR-30 is longer and is designed for anchors up to 75 lbs.
These rollers have bent tabs that control the rode and provide antichafing protection.
Bruce-25 anchor rollers has three wheels and is designed
specifically to self-launch Bruce or Claw anchors up to 44 lbs.
KIN BRUCE-25
Kingston Quickset Anchor Roller
KIN QR-20
KIN QR-30
Kingston Narrow Roller
The CQR-20 is a heavy-duty anchor
designed for CQR anchors up to 45 lbs. It is made out of heavy
plate stainless. Three pin positions are provided for securing the
anchor when stowed.
The BR-15 is a narrow roller (2" outside dimension) for rollers up
to 20 lbs.
KIN BR-15
MOORING & ANCHORING
Kingston Universal Roller
The BR-20 is a universal roller designed for anchors up to 35 lbs.
The extended tabs rest against pivoting fluke type anchors, holding
the anchor securely in place. The rounded bail controls the rode.
KIN BR-20
KIN CQR-20
Kingston Roller Wheels
The roller wheels are machined from delrin. Delrin is a tough,
strong, and very dense polymer that has low absorption of
moisture.
• Centre ID: 3/8"
KIN W2-16
KIN W2-25
KIN W25-25
KIN W25-3
KIN W25-35
2" Dia x 1.6"
2" Dia x 2-1/2"
2.38" Dia x 2-1/2"
2.38" Dia x 2-7/8"
2.38" Dia x 3-3/8"
Anchor Rollers / Anchor Chocks
865
Anchorlift Stainless Steel Chain Stopper
Windline Stainless Steel Anchor Chocks
Works with your anchor rollers to take the tension off
the windlass by locking the chain. Included
a convinient foot tab for safe and easy
operation. Mounted with 4 screw holes to
increase breaking strength. Made in mirror
polished stainless steel.
• Handles 7 - 10 mm (1/4 - 3/8") chain
Designed to fit Danforth anchors to 35 lbs. All stainless steel. For
7/8" or 1" OD tubing.
WIN PM-1
WIN PM-2
Rail mount (horizontal)
Stanchion mount (vertical)
ALF 91404
Sea-Dog Chain Stoppers
• Use for Sea-Dog and comparable bow rollers
• Mounts alone or inside most bow rollers
• Use 5/16" FH fasteners
Part #
Chain Sizes
WxDxH
SED 321820-1
3/16" - 1/4"
2-3/4" x 2-3/8" x 1-13/16"
SED 321825-1
5/16" - 3/8"
3-5/8" x 3-1/8" x 2-7/16"
Maxwell Chain Stoppers
Sea-Dog Anchor Chock
A low profile stopper with positive non-slip
grip. Easy release. High strength construction
that comes in a bronze, chrome plated finish.
MAX P102211
MAX P102212
5/16" chain, L: 152mm x W 51mm x H: 72
3/8" chain, L: 190mm x W 64mm x H: 85
Windline Heavy Duty Anchor-Tite Anchor Holder
This flip-lever, stainless steel tensioner locks the anchor in place,
yet allows for quick release. For anchors up to 90 lbs. and any size
chain or shackle.
WIN AT-3
• Chrome plated cast brass
• Suitable for 5 - 25 lb anchors
• Use #10 FH fasteners
SED 322100-1
Sea-Dog Anchor Chock
• Cast 316 stainless steel
• Suitable for 5 - 20 lb anchors
• Use #10 FH fasteners
SED 322150-1
Perko Anchor Chocks
Chrome plated cast bronze anchor chocks.
• Fits Danforth style anchors from 25 to 70 lbs
PER 903-DP2-CHR
MOORING & ANCHORING
• Fits Danforth style anchors up to 18 lbs
PER 903-DP1-CHR
866
Anchoring Accessories
Anchorlift Anchor Swivels
Attwood “Lift and Lock” Anchor Controls
Easy to use anchor roller and built in lock and release
mechanism. Will support an anchor up to 20 lbs with
1/4" to 7/16" line.
Deluxe:
• High impact reinforced nylon
• Stainless steel shafts
• Easy pull-up, lock, and release
Stainless steel anchor connectors with swivel. With
an anchor connector swivel attached to the anchor it
is impossible for the chain to get twisted. The oval
shaped joint allows perfect sliding of the anchor
through the roller with no risk of damaging any
components. Fits the Shark, Delta, Bruce and Holding
anchors up to 80 kgs/176 lbs.
ATT 13702-4
Standard:
• Economical steel/zinc plate anchor
lift
• Nylon pulley system
• Steel sheave controls anchor from
any position
Part #
Chain
Dimensions (cm)
ALF 964408
1/4 - 5/16"
A:8.5 x B:3 x C:2 x D:1
ALF 964410
5/16 - 3/8"
A:9.5 x B:4.5 x C:2.5 x D:1.4
Sea-Dog Anchor Swivels
ATT 13700-7
Scotty Anchor Locks
• AISI 316 stainless steel
Part #
Lock and release system for small boats. The #276 and #277
come with deck mounts and are removable while the #278F is
permanently mounted to the boat.
SCO 276
SCO 277
SCO 278F
Comes w/ #241 side/deck mount
Comes w/ #244 flush mount
Anchor lock
A
B
C
Chain
Sizes
SED 182608-1
3-9/16"
5/8"
13/16"
1/4"-5/16"
SED 182612-1
4-11/16"
13/16"
1-1/16"
5/16"-1/2"
5-1/2"
1-1/8"
1-3/16"
1/2" - 5/8"
SED 182614
► Also See:
No te s
Swivels pg 746
MOORING & ANCHORING
868
Windlasses
Maxwell RC6 Rope/Chain
Windlass
• The RC6 features Maxwell’s
revolutionary, and patented,
new Wave Design chainwheel (See below)
• Designed with the smaller, trailer boat market
in mind the in-line, vertical gearbox and motor
means quick and easy installation by either the
boat yard or the DIY aftermarket customer
• The RC6 is a Low Profile unit (no optional
capstan drum)
MAX RC6-12V
Maxwell RC8 & RC10 Series Rope/Chain Windlasses
• The ingeniously designed rope/chain gypsy (chainwheel) is able to
accommodate a wide range of chain pitch differences within the specified
chain size diameters
• Sleek, Low Profile and MAX-Grip capstan drum versions are available to
suit individual user preference.
• Simple two piece installation saves time and money and allows easy
retrofitting without disassembly of the windlass.
• Dual direction, power up and down operation via helm station controls or
foredeck foot switches (available option).
• Huge, through deck hawse pipe throat ensures easy entry of the rope/
chain rode into and out of the anchor locker.
• Cone type clutch/brake mechanism permits manual, ‘free fall’ anchoring.
• Sealed oil bath and marine-grade hard anodised, alloy gearbox provides
high efficiency output drive via precision worm and wormwheel.
Exclusive Maxwell 3 YEAR Limited Warranty
MAX RC8-6-12VCAP
1/2" rope x 1/4" chain, w/ Capstan
MAX RC8-8-12V
5/8" rope x 5/16" chain
MAX RC8-8-12VCAP
5/8" rope x 5/16" chain, w/ Capstan
This patented rope/chain wheel incorporates two unique design
concepts that greatly improve the handling and control of the
rope/chain spliced rode. The outer ribs of the chainwheel are
angled slightly forward ensuring that the rope and the chain are
smoothly guided in the wheel during anchor retrieval. As the
rope pulls into the wheel, the opposite facing inner ribs grip the
rope in an undulating manner, securing the rope more firmly in
a ‘wave pattern’ action that is far superior to the traditional ‘jam
cleat’ manner of holding the rope compared to all other products
on the market. Not only does this Wave Design hold the rope
more securely, it is also kinder on the rope resulting in increased
longevity of your anchor rode.
MAX RC10-8-12V
MAX RC10-8-12VCAP
MAX RC10-10-12V
MAX RC10-10-12VCAP
5/8” rope x 5/16” chain
5/8" rope x 5/16" chain w/ Capstan
5/8” rope x 3/8” chain
5/8” rope x 3/8” chain w/ Capstan
Specifications
Model
RC6-12V
RC8-6-12VCAP
RC8-8-12V
RC8-8-12VCAP
RC10/8-12V
RC10/10-12V
Maximum Pull
660lbs (300kg)
770lbs (350kg)
1320lbs (600kg)
1540lbs (700kg)
1870lbs (850kg)
Chain Speed
79ft/min
24m/min
92ft/min
28m/min
79ft/min
24m/min
79ft/min
24m/min
79ft/min
24m/min
Rope Speed
69ft/min
21m/min
79ft/min
24m/min
69ft/min
21m/min
65ft/min
20m/min
65ft/min
20m/min
Motor (Watts)
500
600
1000
1000
1200W
MOORING & ANCHORING
Rope Size
1/2" (12mm)
1/2" (12mm)
9/16-5/8" (14-16mm)
9/16-5/8" (14-16mm)
5/8” (16 mm)
Chain Short Link
1/4" (6/7mm)
1/4" (6/7mm)
5/16" (8mm)
5/16" (8mm)
3/8” (10 mm)
Net Weight
18.7lbs (8.5kg)
27.5lbs (12.5kg)
36.3lbs (16.5kg)
42lbs (19 kg)
44lbs (20 kg)
Dimensions
Model
RC6-12V
RC8-6-12VCAP
RC8-8-12V
RC8-8-12VCAP
RC10/8-12V
RC10/10-12V
A
7-3/4" (196mm)
8-5/16" (210mm)
8-5/16" (210mm)
9-1/8” (230 mm)
B
3-3/16" (80mm)
3-5/16" (83mm)
3-5/16" (83mm)
3-1/2” (89 mm)
B (with capstan)
N/A
5-3/4" (146mm)
5-3/4" (146mm)
7” (178 mm)
C
5-3/4" (145mm)
6-3/16" (156mm)
6-3/16" (156mm)
6-3/4” (170 mm)
D
8-1/8" (205mm)
7-7/8" (200mm)
8-1/4" (208mm)
7-7/8” (201 mm)
E
2-1/2" (65mm)
2-1/2" (65mm)
2-1/2" (65mm)
10-3/4” (272 mm)
F
1-9/16" (39mm)
1-5/8" (40mm)
1-5/8" (40mm)
16-3/4” (424 mm)
Motor offset
N/A
9-1/2" (240mm)
10-3/4" (272mm)
2-1/2” (65 mm)
Windlasses
F YI
Maxwell Freedom Series Windlass
869
How to select the proper windlass
Step One:
Maxwell’s Freedom series winches offer trouble-free
flawless performance for rope and chain combinations. The
Freedom series handles both rope and chain and transfers
from one to the other automatically. Two models are
available for boats 20 ft. to 50 ft. Patented tension system
ensures that the rope and chain feed trouble-free. Multiple
mounting positions allow for a simple installation.
Comes complete with a dual direction solenoid pack, circuit
breaker panel, up/down remote switch panel, emergency
crank/clutch release handle. Three year warranty.
Add-up the weight of your ground tackle, this includes the anchor, chain and rode
being used. Multiply this number by 3. This represents the maximum load rating
you would require. i.e. Ground tackle consisting of, 20 lb. anchor, 100 ft. of 1/4"
chain, 200 ft. of 1/2" 3-strand nylon. 20 lb. + 75 lb. + 14 lb. = 109 lb. x 3 = 327 lb.
Load. Therefore a 500 Series windlass would be adequate.
Step Two:
Identify what type of installation options you have. Freedom and VWC windlasses
take-up the least deck space and are the most tolerant of mounting location.
HWC windlasses are particularly good for mounting on extra thick decks or when
operating two anchors with one winch. HWC and VWC windlasses are best for allchain applications and Freedom windlasses are used for rope-chain combinations.
MAX P100000
MAX P100001
(Freedom 500) 12 Volt low profile windlass
(Freedom 800) 12 Volt low profile windlass
Parts:
MAX P100019
MAX 131AI
Pressure arm upgrade kit Freedom 500 & 800
Replacement handle
Dimensions
Specifications
Model
RC500
RC800
Model
RC500
RC800
Maximum Pull
227 kg
500 lbs
364 kg
800 lbs
A
207 mm
8-3/16”
207 mm
8-3/16”
Chain Speed
19 m/min
62 ft/min
33 m/min
108 ft/min
B1
79 mm
3-1/8”
79 mm
3-1/8”
Rope Speed
14 m/min
45 ft/min
21 m/min
69 ft/min
B2
145 mm
5-3/4”
145 mm
5-3/4”
Power Supply
12 or 24V
12 or 24V
C
168 mm
6-11/16”
168 mm
6-11/16”
D
193 mm
7-9/16”
215 mm
8-7/16”
E
364 mm
14-3/8”
364 mm
14-3/8”
F
240 mm
9-7/16”
240 mm
9-7/16”
G
65 mm
2-1/2”
65 mm
2-1/2”
Motor Watts
600
1000
Rope Size
12 mm-1/2”
16mm-5/8”
Chain Size
6 mm-1/4”
8mm-5/16”
MOORING & ANCHORING
870
Windlasses
Maxwell Vertical Windlasses
Designed for automatic handling of all-chain anchor rode plus independent rope handling .
All exterior parts are stainless or chrome bronze making them virtually maintenance free.
The motor and gear box are below decks freeing up valuable deck space and keeping them from the elements. All VWC electric
windlasses come complete with single direction controls, chain pipe, chain wheel, circuit breaker/isolator panel, foot switch and an
emergency crank handle. A dual direction kit is available for all models. All VWC windlasses are available in 12 volt or 24 volt DC.
Models 800 and larger are available with hydraulic motors. Three year warranty.
Model VWC 1000
• Intended for boats 34' to 45'
• Chain wheels to fit all Acco brand 1/4" and 5/16" hi-test chains
• Three year warranty
VWC 2200
MAX VWC1000-12V105 12V with rope capstan & 5/16" chainwheel
MAX VWC1000-12V111 12V with rope capstan & 1/4" chainwheel
Model VWC 1500
• Intended for boats 35' to 55'
• Chain wheels to fit all Acco brand 1/4", 5/16" and 3/8" hi-test chains
• Three year warranty
MAX VWC1500-12V105 12V with rope capstan & 5/16" chainwheel
MAX VWC1500-12V100 12V with rope capstan & 3/8" chainwheel
MAX VWC1500-24V105* 24V with rope capstan & 5/16" chainwheel
Model VWC 2200
• Intended for boats 40' to 58'
• Chain wheels to fit all Acco brand 1/4", 5/16", 3/8" and 7/16"" hi-test chains
• Available without rope capstan
• Opposite rotation available for twin installations
• Three year warranty
MAX VWC2200-12V105 12V with rope capstan & 5/16" chainwheel
MAX VWC2200-12V100 12V with rope capstan & 3/8" chainwheel
MAX VWC2200-24VXXX* 24V with rope capstan & 5/16" chainwheel
Model VWC3500
• Intended for boats 45' to 70'
• Chain wheels to fit all Acco brand 5/16", 3/8" and 1/2"
BBB, G40 or G30 chains
• Available without rope capstan
• Opposite rotation available for twin installations
MAX VWC3500-HYD058 Hydraulic motor
*Request Item
Specifications
Model
1000
1500
2200
3500
Maximum Pull (lbs)
1000
1500
2200
3500
Chain Sizes
1/4"-3/8"
1/4"-3/8"
3/8"-7/16"
5/16"-1/2"
Line Speed (per min.)
60'
60'
56'
33'
Motor (watts)
1000
1200
1200
1200
Weight (lbs)
52
52
81
88
Dimensions
MOORING & ANCHORING
Model
1000
1500
2200
3500
A
80 mm
3-5/32”
80 mm
3-5/32”
94 mm
3-11/16”
110 mm
4-11/32”
B
207 mm
8-5/32"
207 mm
8-5/32"
242 mm
9-17/32”
254 mm
10”
C
69 mm
2-23/32"
69 mm
2-2 3/32"
80 mm
3-5/32”
83 mm
3-9/32”
D
220 mm
8-21/32"
220 mm
8-21/32"
290 mm
11-13/32”
290 mm
11-13/32”
E
277 mm
10-29/32"
277 mm
10-29/32"
185 mm
7-9/32”
185 mm
7-9/32”
F
225 mm
8-7/8"
225 mm
8-7/8"
297 mm
11-23/32”
333 mm
13-1/8”
G
100 mm
4”
100 mm
4”
100 mm
4”
100 mm
4”
H
44 mm
1-3/4"
44 mm
1-3/4"
33 mm
1-5/16”
31 mm
1-7/32”
Windlasses
871
Maxwell Horizontal Windlasses
Designed for fully automatic handling of all chain anchor rodes plus independent rope
handling ability. Marine-grade epoxy powder-coated alloy casing. Simple installation with
flush deck mounting and no under deck parts. The horizontal windlass comes standard as
a single direction winch but is easily upgraded to a fully automatic dual direction ability.
Included with the standard winch are a foot switch, chain pipe, chain wheel for specified chain
size, circuit breaker and an emergency crank handle. The models 1200 and larger are available
with a hydraulic motor.
24 volt motors are available for all models.
Specifications
HWC 2200:
Model
2200
• Intended for boats 40' to 58'
• 1200 watt motor
Max. Pull
1000 kg
• Chain wheels to fit all Acco brand 1/4", 5/16", 3/8" and 7/16"
2200 lbs
high-test chains
Line Speed
17 m/min
MAX HWC3500-12V058* 12V
*Request Item
1590 kg
3500 lbs
56 ft/min
10 m/min
33 ft/min
Motor Watts
1200
1200
Max. Chain
11 mm
7/16”
13 mm
1/2”
Weight DC
41 kg
91 lbs
48 kg
106 lbs
MAX HWC2200-12V033* 12V
HWC 3500:
• Intended for boats 45' to 70'
• 1200 watt motor
• Chain wheels to fit all Acco brand 5/16", 3/8" and 1/2" chains
3500
Maxwell Capstan Winch
An extremely versatile vertical or horizontal (clockwise-nonreversing) capstan or general purpose electric winch for use as an
anchor winch, pot hauler or davit winch. Utilizes a fully sealed
gearbox driven by a vertically mounted, high efficiency permanent
magnet motor that generates up to 386 kg (850 lbs) of line pull.
Manufactured in durable anodized marine aluminum with chrome
manganese bronze top parts.
Comes complete with foot switch.
MAX P9510005
MOORING & ANCHORING
Maximum line pull............ 386kg (850lb)
Speed.............................. @ nominal working load 24m/min
Voltage............................. 12V
Power.............................. 600W
Weight............................. 8kg (17.6lb)
Maximum boat loa........... 10m (33ft)
Max. boat weight............. 4 tonnes
872
Windlasses
Maxwell Horizontal Rope/Chain Winches
• Aesthetically pleasing above deck design, incorporating the motor and drive in an IP66 rated
watertight unit, saving space below deck and allowing simple routine maintenance. Highpressure die cast, marine grade, alloy case is chromate passivated and polyester powder coated for
unsurpassed marine protection
• Simple “bolt down” installation ensures effortless and rapid on-deck installation and set up
• Proven and patented tension arm system, within a safe, enclosed design, guarantees trouble free
rode transition from rope to chain
• Integrated composite nylon through deck hawse pipe for ease of installation and smooth, snag free operation
• High efficiency 59:1 ratio straight cut, spur gearbox incorporating a robust (tough) non-back wind mechanism
• High speed, jam free retrieval of rope and chain controlled from remote, panel mounted Up/Down switch control
• Emergency, free fall function in the event of on-board power failure
• Innovative chainwheel constructed of marine-grade alloy bronze with a high quality chrome finish suitable for use with 6 to 8mm
(1/4" to 5/16") short link chain and either 3-Strand or 8-Plait rope
• Heavy duty, dual direction motor incorporating “new technology” features, easily
Specifications
removed for simple routine electric brush maintenance and integrated wiring for
Model
HRC6-12V
HRC8-12V
quick electrical installation
Standard Equipment
• Up/down remote control panel
• Dual direction control system
• Circuit breaker/isolator panel
• Emergency free fall activation lever
MAX HRC6-12V
MAX HRC8-12V
Max. Pull
275 kg
600 lbs
410 kg
900 lbs
Chain
6 mm-7 mm
1/4"
7 mm-8 mm
1/4”-5/16”
Rope Size
12 mm
1/2”
12 mm-14 mm
1/2”-5/8”
Line Speed
27 m/min
89 ft/min
28 m/min
92 ft/min
Line Speed
30 m/min
98 ft/min
33 m/min
108 ft/min
Power
12V
12/24V
Motor Watts
400W
600W
Breaker
50 Amp
70 Amp
Weight
10 kg
10 kg
Maxwell Liberty Rope/Chain Windlasses
Feature packed with patented innovation and styling,
• Balanced force pressure arm system eliminates snags
• Rope/chainwheel design ensures maximum grip on rope splice
• Simply activated emergency/manual crank mechanism
• Geared manual crank for easy emergency anchor retrieval
• Push button disassembly for easy servicing
• “Quick Fit” deck plate design saves installation time and money
and allows easy retrofitting without disassembly of the windlass
MOORING & ANCHORING
Standard Equipment:
• Circuit breaker/isolator panel (supplied with DC units only)
• Dual direction solenoid pack
• Up/down remote control panel
• Emergency (manual) crank/clutch release handle
• Maxwell Chain Spacer Kit
Recommended for boats between 35' and 55'.
MAX RC1700-24V
Part #
RC1700-24V
Max. Pull
Chain Size
Rope Size
Chain Speed
Rope Speed
Motor
Weight
770 kg
1700 lbs
8 mm
5/16"
16 mm
5/8"
23 m/min.
75'/min.
20 m/min.
66'/min.
1000W
39 kg
86 lbs
Windlass Accessories
873
Maxwell Chain/Chainwheel Chart
Size
Manufacturer
4” 3132
500 Series
5” 3173
1000-1500 Series
6” 3231
2200-2500 Series
7” 3182
3500-4000 Series
3/16”
Acco BBB
201C
-
-
-
1/4”- 9/32”
1/4”
1/4”
1/4”
Acco G-63
Acco HT G-40
Acco PCG-30
Acco BBB
203C
203C
203C
111C
111C
-
046C*
046C*
046C*
-
5/16”
5/16”
5/16”
Acco G-63
Acco HTG-40
Acco BBB
-
105C
105C
033C
033C
033C
033C
3/8”
3/8”
3/8”
3/8”
Acco G-63
Acco HTG-40
Acco PCG-30
Acco BBB
-
100C
100C*
114C*
058C*
058C
065C
054C*
054C*
058C
054C*
1/2”
1/2”
Acco HTG-40
Acco PCG-30
-
-
-
016C
-
*Request Item
To order, use the prefix MAX, number corresponding to chain wheel size, followed by chain code. For example, to order a
4" chain wheel for 3/16" chain, use: MAX 3132-201.
*Note: (1) All above chain is I.S.O. short link. N.A.C.M. metric long link cannot be used. (2) Chains not listed above may
work in some applications. We can try to match your chain wheel/chain requirement if you would provide us with either an
6' chain sample or your existing chain wheel.
Maxwell Standard On/Off Breaker Panels
A thermally operated (manual reset) 12V breaker provides reliable,
automatic over current protection. This black panel comes complete
with a power-on indicator light and is included with all windlasses
except the 500 series.
• Panel size: 4" x 4"
MAX P100790
MAX P100791
MAX P102902
MAX P102903
80 amp breaker
135 amp breaker
50 amp breaker
70 amp breaker
Maxwell Reversing Solenoids
Use these parts on all Maxwell winches if dual direction is
required.
MAX P19045 MAX P19001 12 Volt S.W. reversing solenoid
Maxwell foot switch
24 volt includes:
MAX P19046 MAX P19001 24 Volt S.W. reversing solenoid
Maxwell foot switch
500 series:
12 volt includes:
MAX P100711 MAX P19001 P.M. reversing solenoid
Maxwell foot switch
A wireless remote control for full windlass
control and chain counting with the option
of thruster operation.
• Controls bow and stern thrusters
independently and together
• Full windlass control and chain
counting
• Preset the length of rode to deploy
• Counts rope/chain or all-chain rode
• Choice of feet, metres or fathoms rode
measurement
• Logs windlass operating hours to assist
with maintenance
• Easy calibration
• Electronic diagnostics for troubleshooting installation
• Console unit is shockproof, waterproof and will float • High level wireless transmission security includes unique ID
and registration for every unit
• Ergonomic shape with lanyard connector
• Rubber over moulding for grip and non slip protection
• Console holder and protective cover
• Displays signal strength and battery level
• Auto stop and docking alarm when the anchor is close to
docking
• Connects to DC, AC and Hydraulic systems
• Operates in parallel with other control equipment eg. toggle
switches, foot switches and other electronic controllers
MAX P102979
MOORING & ANCHORING
All models except 500 series:
12 volt includes:
Maxwell Wireless Remote Control
for Windlasses and Thrusters
874
Windlass Accessories
Maxwell Auto Anchor 560
Panel mount rode counter for electric or
hydraulic windlasses using all-chain or
rope/chain rode.
• Windlass control and monitoring from
the helm
• Large LCD display with adjustable red
backlighting shows length of anchor rode deployed
• Display in feet or metres
• One-touch automatic function deploys and retrieves a preset
length of anchor rode
• Manual operation also available
• Vessel is protected during anchor retrieval by preset windlass
stopping point and docking alarm
• Safety lock protects windlass from accidental deployment
• Measurements and settings are saved on exit or if the battery
fails
• Simple installation and set up with pre-programmed
calibrations for rope/chain rodes
• Install one or more units or combine with the AA150 or
AA601 for multiple stations
• Cover for weather protection
MAX P102944
12V or 24V DC
Maxwell Toggle Style Up/Down Remote Panel
Designed for use with all Maxwell windlasses
using a dual direction control kit. Can be wired
together for multiple station application. Red
light indicates power on.
• Panel size: 3-5/16"H x 2-3/8"W
MAX P19220
MAX P19221
12V
24V
Maxwell Waterproof Foot Switch
A foot operated, waterproof deck switch for all anchor
windlasses. This heavy duty (150 amps continuous) switch does
not require additional solenoids. Mounts in any thickness deck
into a 2" diameter hole. 3/8" stud terminals. Switch cover ring
diameter: 4". Depth from deck top: 2-1/4".
6 stainless steel wood screws included.
• 12 to 24 volts
MAX P19001
MOORING & ANCHORING
Parts:
MAX 2343
Diaphragm
Maxwell Switch w/ Cover
A P19001 Maxwell foot switch with a hinged, black, impact
resistant, protective cover that guards against accidental use of
the windlass. Switch cover ring diameter:
4-1/4"with a 3/4" hinge pocket. 12 to 24 volts.
MAX P19006
MAX P19007
Black
White
Parts:
MAX SP1387
Replacement cap - White
Maxwell Rope/Chain
Spliced sets of rope and chain with a choice of
Nylon Brait or Pro Set 3 Strand Nylon.
MAX BRC-1/2"X175'
MAX BRC-1/2"X200'
MAX BRC-1/2"X250'
MAX BRC-1/2"X350'
MAX BRC-5/8"X250'
MAX BRC-5/8"X350'
MAX BRC-5/8"X375'
1/2" x 150' Brait & 1/4" x 25' chain
1/2" x 150' Brait & 1/4" x 50' chain
1/2" x 200' Brait & 1/4" x 50' chain
1/2" x 300' Brait & 1/4" x 50' chain
5/8" x 200' Brait & 5/16" x 50' chain
5/8" x 300' Brait & 5/16" x 50' chain
5/8" x 300' Brait & 3/8" x 75' chain
MAX PRC-1/2"X250'
MAX PRC-1/2"X350'
MAX PRC-5/8"X250'
MAX PRC-5/8"X350'
1/2" x 200' Proset & 1/4" x 50' chain
1/2" x 300' Proset & 1/4" x 50' chain
5/8" x 200' Proset & 5/16" x 50' chain
5/8" x 300' Proset & 5/16" x 50' chain
Anchorlift Rope/Chain
Double braid nylon 24 plate super soft
rope with chain combination. The inner
core is designed to give the rope a better
grip and avoid slippage on the gypsy.
Spliced with Anchorlift´s original hot
dip galvanized HT chain. Soft compact
splice between rope and chain that
makes this rodes your best choice for trouble free operation.
ALF DB1/2X200-15
ALF DB1/2X300-20
ALF DB1/2X300-50
ALF DB5/8X200-50
ALF DB5/8X300-50
► Also See:
200' x 1/2 rope & 15' x 1/4" chain
300' x 1/2" rope & 20' x 1/4" chain
300' x 1/2" rope & 50' x 1/4" chain
200' x 5/8" rope & 50' x 5/16" chain
300' x 5/8" rope & 50' x 5/16" chain
Nylon Rope pg 832
Endurance Marine Capstan Deck Winch
An affordable, high quality anchor winch that will handle vessels
up to 40'. The compact horizontal
mount design allows installation in
limited spaces. The recovery rate
allows many other applications such
as retrieval of crab traps.
• 1.3 hp motor
• Separate foot control
• Stall load: 1,000 lbs
• Gypsy diameter: 3.15"
• 12.65" L x 6.5" D x 6.7" H
• Weight: 14 lbs
Part #
END WCH600
Line Speed
200 lbs. @ 31 FPM 50 amp draw
600 lbs. @ 24 FPM 85 amp draw
875
Windlasses
The Complete Windlass System
Anchorlift has more than 2 generations of experience
manufacturing and distributing windlass systems
and windlass accessories for the marine industry.
From small boats to super yachts and from sailboats
to power boats, Anchorlift has a variety of windlass
system solutions for your boating needs.
Windlasses
Control Units
Anchors
Rollers
Chain
Anchorlift strives to make windlasses and windlass
accessories with the highest quality materials possible
and provides a 5-Year Warranty on all of our windlass
models and windlass accessories. Anchorlift's 5-Year
Warranty covers all windlass models and windlass accessories that
are found to be defective and will replace the defective part(s) free
of charge within 5 years of the purchase date.
Anchorlift Barracuda Windlasses
Anchorlift Dolphin Windlasses
These low profile models take up less space on the deck. Designed
for smooth & silent motor/gear operation under the deck. Powerful
and compact windlass with capstan for optional warping operation.
Vertical shaft in stainless steel. Highspeed drop of up to 40 m per
minute. Manual free fall with adjustable clutch. Stainless steel parts
in high polished steel (316L). Long term trouble-free operation.
Works with chain only or rope/chain combination.
Ideal for boats 35-45 feet long. These models are designed for
smooth & silent motor/gear operation under the deck and take up
less deck space. Powerful windlass with a new compact motor.
With capstan for optional warping operation. Vertical shaft in
stainless steel. Highspeed drop of up to 40 m (120 ft) per minute.
Manual free fall with adjustable clutch. Stainless steel parts in high
polished steel (316L). Long term trouble-free operation. Works
with chain only or chain/rope combination.
ALF BA612
ALF BA912
ALF B612
ALF B912
Aluminum 600 watt
Aluminum 900 watt
S/S 600 watt
S/S 900 watt
ALF D1012
ALF D1012C
Accessories:
Accessories:
ALF HANDLE
S/S Low profile
S/S Capstan
ALF HANDLE
Spare handle
Spare handle
B612 / BA612
B912 / BA912
Model Number
Motor
600 watt
900 watt
Motor output
Voltage
12 volt
D1012
D1012C
1000 watt
Voltage
12 volt
Max Working Load
150kgs (330lbs)
220kgs (484lbs)
Max Working Load
250kgs (550lbs)
Max Power Pull
450kgs (990lbs)
660kgs (1452lbs)
Max Power Pull
750kgs (1650lbs)
Current Draw
40 Amp
55 Amp
Current Draw
65 Amp
Drop Speed Chain
36m (109ft)
38m (125ft)
Drop Speed per min.
33m (100 min)
Alt. 1 - Chain
6mm DIN 766
Alt. 1 Chain/rope
8mm DIN766
Alt. 2 - Chain/rope
7mm - 1/4" HT G4
Alt. 2 Chain/rope
10mm - 5/16" HT G4
Rope Alt. 2
12mm - 1/2" line
Rope Alt.
14mm - 9/16" line
Dimensions
A3.14" x B4.48" x C7.08" x D4.6" x E10.62"
Rope Alt. 2
16mm - 5/8" line
Dimensions (inches)
D1012
D1012C
A4.33 x B4.48 x C8.85 x D5.9 x E12.2
A5.51 x B5.51 x C8.85 x D5.9 x 12.2
Weight
7.5kgs (16.5lbs) /
8.3kgs (19lbs)
7.5kgs (16.5lbs)
Weight
11.9kgs (26lbs)
19kgs (42lbs)
MOORING & ANCHORING
Number
876
Windlasses
Anchorlift Mako Windlasses
Powerful 1200 & 1500 watt motors, ideal for 40-60 foot boats.
Designed for smooth & silent motor/gear operation under the deck.
Powerful windlass with capstan for optional warping operation.
Vertical shaft in stainless steel. Highspeed drop of up to 40 m per
minute. Manual free fall with adjustable clutch. Stainless steel parts
in high polished steel (316L). Long term trouble-free operation.
Works with chain only or chain/rope combination.
ALF M1212
ALF M1212C
ALF M1512
S/S Low profile 1200 watt
S/S Capstan 1200 watt
S/S Low profile 1500 watt
Stainless steel front plates. Toggle or
rocker control. Rocker switch has a safety
on/off switch.
ALF 90800
Toggle
ALF 90801
Rocker w/ on-off
Anchorlift Foot Switches
UP & DOWN switches with a safety cover
to prevent accidental push button operation.
Available with black or white cover.
• Sold in pairs
Accessories:
ALF HANDLE
Anchorlift Panel Switches
Spare handle
ALF 90900B
ALF 90900W
Black
White
Anchorlift Solenoid
Operates anchor windlass system from 400 to
1500 watts 12 volts. Reliable and compact in
size. The external connections on the solenoids
make them very easy to install.
ALF 90501 Number
M1212 / M1212C
M1512
Motor output
1200 watt
1500 watt
Voltage
12 volt
12 volt
Max Working Load
400kgs (800lbs)
485 kgs (1067lbs)
Max Power Pull
1100kgs (2420lbs)
1200 kgs (2640lbs)
Current Draw
95 Amp
115 Amp
Drop Speed per min.
40 m (120ft) / min
40m (120ft) / min
Alt. 1 Chain/rope
8mm - 5/16" HT G4
10mm - 3/8" HT G4
Alt. 2 Chain/rope
10mm - 3/8" HT G4
8mm - 5/16" HT G4
Dimensions (inches)
M1212 / M1512
M1212C
A4.13 x B5.0 x C10.03 x D6.69 x E12.2
A6.49 x B5.0 x C10.03 x 6.69 x E12.2
Weight
M1212
M1212C
M1512
19.2 kgs (44 lbs)
20.4 kgs (45 lbs)
19.5 kgs (43 lbs)
Blue Sea Systems
Bussmann 185 Series Circuit Breakers
These high amperage, thermally activated, circuit breakers are all
non-corrosive materials and waterproof construction. They are
manually re-settable with the reset handle providing a positive
means of determining that a circuit fault has occurred. A red reset
button can also be tripped manually, allowing the breaker to be
used as a switch. Designed for surface or panel mounting. Rated at
3000 ampere interrupt capacity and 30 VDC maximum.
BSS 7111
BSS 7112
BSS 7114
BSS 7106
BSS 7102
BSS 7107
BSS 7113
BSS 7115
BSS 7104
60
70
80
90
100
110
120
135
150
MOORING & ANCHORING
Wiring Data
Length of cable run
0-24'
24'-50'
Circuit Breaker
Barracuda 600
6 AWG
2 AWG
60A
Barracuda 900
2 AWG
1 AWG
80A
Windlass
Dolphin 1000
2 AWG
1 AWG
100A
Mako 1200 - 12V
1 AWG
1/0 AWG
135A
Mako 1200 - 24V
6 AWG
2 AWG
80A
Mako 1500 - 12V
1 AWG
1/0 AWG
135A
Mako 1500 - 24V
6 AWG
2 AWG
100A
Boat Hooks / Pike Poles
Garelick Boat Hooks
• Anodized aluminum tubing with unique
rolled edges for added comfort
• Permanently attached glass reinforced head
with vinyl tips
• Vinyl non-slip safety grips
Premium Telescoping
• Adjustable, 3 sections, 1" - 1-1/8" - 1-1/4"
GAR 55170
GAR 55175
42" - 96"
56" - 144"
Standard Telescoping
• Adjustable, 2 sections, 1" - 1-1/8"
GAR 55190
48" - 90"
Fixed Length
Soo-Line Aluminum Pike Poles
With a non-blackening anodized finish these poles are light,
strong and buoyant. Made with a straight pike and knob type grip
securely crimped in 1-1/4" O.D. tubing.
DOM 500A - 8'
DOM 500A - 10'
DOM 500A - 12'
DOM 500A - 14'
DOM 500A - 16'
DOM 500A - 20'
Soo-Line Aluminum Pike Pole Parts
Replacement wooden parts for rebuilding poles.
• Fixed length 1" diameter
GAR 55006
GAR 55008
877
6'
8'
DOM 530P
DOM 530GK
Pole plug for pike
Hand grip, knob style
Davis Telescoping Boat Hooks
Soo-Line Pike Pole Gaffs
The best boat hook just got better! New threaded tip accepts
standard 3/4" thread mops, brushes, etc. Available in two easy-tostore sizes.
DIN 4122
DIN 4132
DIN 4152
DIN 5141
53" - 96"
2 sections
38" - 96"
3 sections
54" - 144" 3 sections
Replacement end, fits most 1" & 1-1/4" poles.
Taylor Made Bazooka Bailers
TAY 18548
TAY 18549
5 ft
8 ft
DOM 322
DOM 323
Straight pike and hook
Curved pike and hook
Shurhold Dock-A-Reni
Makes a Loop - Dock Line Holding Tool:
• Use any boat pole
• No special storage necessary
• Simple & safe to use
• Plastic - no rusting
• UV resistant
SHU 134
MOORING & ANCHORING
A combination boathook/bailer/power washer.
• Anodized aluminum shaft
• Collapses nearly in half for storage and automatically locks
firmly in place when fully extended
• Two non-slip grips
• 8' model drains nearly a quart per stroke
• Nitrile piston resists oil and gas
• Water is expelled at approximately thirty six times faster than
it's operating speed, giving it a firing range of over 50'
Manufactured of drop-forged, heattreated carbon steel. Both items are
threaded screw type to fit our Soo-Line
pike poles.
Download PDF