Yamaha | YHT-196 | Owner`s manual | Yamaha HTR-2064 Owner`s manual

YHT-196 Home Theater Package
Connection Guide
English
The Yamaha YHT-196 Home Theater Package includes everything you need to add great sound
to your home theater. By following the steps in this Connection Guide, you’ll have your home
theater set up in no time and be enjoying music and movies like never before. Part A explains how
to connect the speakers and antenna. Part B explains how to connect various AV components. See
the relevant owner’s manuals for full instructions and precautions.
© 2011 Yamaha Corporation
Printed in China WZ13610
Caution: Disconnect all components from AC outlets before proceeding.
1
4
Caution: Disconnect all components from AC outlets before proceeding.
AV Receiver
HDMI 2
HDMI 3
1
VOLTAGE
SELECTOR
Part A: Speakers and Antenna
SPEAKERS
FRONT
CENTER
SURROUND
SUB
WOOFER
110V120V
220V240V
3
SUBWOOFER
Connecting HDMI-capable components
AV Receiver
Caution
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local voltage BEFORE plugging the
power cable into the AC wall outlet. Improper setting of
the VOLTAGE SELECTOR may cause damage to this
unit and create a potential fire hazard.
TV
1
CENTER
FRONT
FM MODE
(Other models)
Connect the AV Receiver and your
other AV components to suitable AC
outlets.
VOLTAGE
SELECTOR
SPEAKERS
CENTER
SURROUND
SURROUND
110V120V
SUB
SUB
WOOFER
VOLTAGE
SELECTOR
UB
OFER
110V120V
220V240V
AV Receiver
Rear Panel
2
Checking the package contents
VOLTAGE SELECTOR
(General model)
Voltages are AC 110-120/220-240 V, 50/60 Hz.
● Connecting your TV
(BD/DVD)
Set the VOLTAGE SELECTOR (General model)
Connect the AC power cable (Other models)
Select the switch position according to your local
voltage using a straight slot screwdriver.
If your TV and BD/DVD players or recorders or satellite/cable set-top box have HDMI
jacks, you can connect them via the AV Receiver. Using HDMI cables (not included),
connect the AV Receiver’s HDMI OUT jack to an HDMI input on your TV, and
connect your BD/DVD players or recorders and satellite/cable set-top box to the AV
Receiver’s HDMI 1(BD/DVD) and HDMI 2 jacks, respectively, as shown.
See the owner’s manuals for more information about HDMI.
Connecting the front, center and surround
speakers
HDMI 1
3
Part B: AV Components
UCABG
MUTE
TUNING
VOLUME
PRESET
INFO
MEMORY
SCENE
RADIO
CD
TV
BD
DVD
STRAIGHT
PROGRAM
TONE CONTROL
INPUT
PHONES
SILENT CINEMA
IN
HDMI
a
c
x4
b
To center
speaker
To front right
speaker
● Connecting your BD/DVD players or recorders,
satellite/cable set-top box
To surround
left speaker
To surround
right speaker
To front left
speaker
AV Receiver
Rear Panel
Satellite/cable set-top box
AV Receiver
4
VOLTAGE
VOLT
LTAGE
SELECTOR
SPEAKERS
CENTER
AV Receiver (HTR-2064)
Remote control and two batteries
(AAA, R03, UM-4)
Indoor FM antenna (FM antenna type
depends on destination country.)
Subwoofer (NS-SWP20)
Front/surround speaker (NS-B20)
Center speaker (NS-C20)
Non-skid pad
Speaker cable
SUB
110VV
120V
Playback
Basic playback procedure
TRANSMIT
RECEIVER
SLEEP
OUT
HDMI
HDMI
1
2
3
1
2
3
4
5
6
5
Positioning the speakers
TUNER
MEMORY
OUT
HDMI
PRESET
Subwoofer
TUNING
INFO
BD/DVD players or
recorders
ENHANCER
MOVIE
SOUND
MUSIC
STEREO
STRAIGHT SUR. DECODE
SCENE
BD
DVD
TV
CD
RADIO
(BD/DVD)
HDMI 1
HDMI 2
HDMI 3
SETUP
VOLTAGE
SELECTOR
CENTER
OPTION
SURROUND
SUB
WOOFER
110V10V20V
120V
220V20V40V
240V
VOLUME
Front
left
Center
Subwoofer
The four front and surround
speakers are identical, so it
doesn’t matter which one you use
in each position.
VOLUME +/–
RETURN
2
SURROUND
Connecting your TV for audio output
You can listen to TV audio through the AV Receiver and speakers by connecting an
audio output on your TV to an audio input on the AV Receiver with, for example, an
optical digital audio cable (not included), as shown.
To listen to TV audio, select the appropriate input source on the AV Receiver.
SUB
WOOFER
Position the speakers as shown.
See the owner’s manuals for more
information on installing the
speakers.
MUTE
MUTE
3. Play the external component that you have
selected as the source input, or select a radio
station on the tuner.
Refer to the instruction manuals provided with the
external component for details
4. Press VOLUME +/– to adjust the volume.
To mute the output.
Press MUTE to mute the audio output.
Press MUTE again to unmute.
TV
AV Receiver
(BD/DVD)
HDMI 1
Surround
left
1. Turn on external components (TV, BD player,
etc.) connected to this unit.
2. Turn on this unit and select the input source
using Input selector.
The name of the selected input source is displayed
for a few seconds.
TUNER
Connecting the subwoofer
SPEAKERS
Front
right
3
Input selector
AUDIO
AV Receiver
2
SURROUND
Connect the front speaker ( ), center speaker ( ) and surround speaker ( ) cables
to the AV Receiver. Make sure you connect the speakers with the correct polarity—
positive (+) terminals to positive (+) terminals, and negative (–) terminals to negative
(–) terminals.
Unpack and check the package contents. The following items are necessary to complete this
Connection Guide. See the owner’s manuals for a complete list of supplied items.
To an AC wall
outlet
HDMI 2
HDMI 3
VOLTAGE
SELECTOR
Surround
right
More various functions are available with the
unit.
SPEAKERS
CENTER
SURROUND
SUB
110V120V
AUDIO 4
OPTICAL
( TV )
Connect the subwoofer ( ) cables to the AV Receiver.
Make sure you connect the subwoofer with the correct polarity—positive (+) terminals
to positive (+) terminals, and negative (–) terminals to negative (–) terminals.
Preparing the cables, speakers and subwoofer
Refer to the “HTR-2064 Owner’s Manual” for details on effective use of the unit.
AUDIO 4
OPTICAL
( TV )
OPTICAL
6
Connecting the antenna
AUDIO OUTPUT
ANTENNA
FM
AV Receiver
ANTENNA
(BD/DVD)
HDMI 1
HDMI 2
HDMI 3
FM
VOLTAGE
SELECTOR
75
SPEAKERS
FRONT
Front, Surround speakers
Center speaker
CENTER
SURROUND
SUB
110V120V
Subwoofer
• Cut the included speaker cable to suitable lengths for the front, center, surround speakers
and subwoofer. You need to make six cables altogether. Remove about 10 mm (3/8 in.) of
insulation from the end of each cable, and then twist the bare strands tightly.
• Connect the speaker cables to the front speakers ( ), surround speakers ( ), center
speaker ( ) and subwoofer ( ). Make sure you connect the speakers and subwoofer
with the correct polarity—positive (+) terminals to positive (+) terminals, and negative
(–) terminals to negative (–) terminals.
Indoor FM
antenna
Your TV supports the Audio Return Channel function and HDMI Control
function
• If your TV supports ARC (Audio Return Channel), this connection is
unnecessary.
• The Audio Return Channel is required the setting of HDMI function of the AV
Receiver before use.
• For the connections and settings, refer to “Single HDMI cable input to TV audio
with Audio Return Channel function” (See HTR-2064 Owner’s Manual).
Connecting external devices other than BD/DVD players
Various devices, audio players, such as CD players, video games, camcorders, etc. can be
connected to the unit.
Changing input settings with a single key (SCENE function)
This unit has a SCENE function that allows you to turn the power on and change input sources
and sound field programs with one key.
Enjoying sound field programs
You can enjoy multi-channel playback for almost any sound source using various sound field
programs stored on the chip, and a range of sound decoders.
For more detail, see the relevant owner’s manuals for full operating instructions.
Connect the indoor FM antenna ( ) to the AV Receiver, as shown. See the owner’s
manuals for more information about connecting antenna.
Time to enjoy your Yamaha Home Theater Package!
Now, relax and enjoy the great sound of your Yamaha Home Theater Package.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising