Asus | AT5IONT-I DELUXE | Specifications | Asus AT5IONT-I DELUXE Specifications

Motherboard
AT5IONT-I DELUXE
AT5IONT-I
E5277
First Edition V1
July 2010
Copyright © 2010 ASUSTeK Computer Inc. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK Computer Inc. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product may contain copyrighted software that is licensed under the General Public License (“GPL”)
and under the Lesser General Public License Version (“LGPL”). The GPL and LGPL licensed code in this
product is distributed without any warranty. Copies of these licenses are included in this product.
You may obtain the complete corresponding source code (as defined in the GPL) for the GPL Software,
and/or the complete corresponding source code of the LGPL Software (with the complete machinereadable “work that uses the Library”) for a period of three years after our last shipment of the product
including the GPL Software and/or LGPL Software, which will be no earlier than December 1, 2011, either
(1) for free by downloading it from http://support.asus.com/download;
or
(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location
where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the
product for which you wish to obtain the corresponding source code and your contact details so that we
can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as
the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source
Software licenses. If however you encounter any problems in obtaining the full corresponding source code
we would be much obliged if you give us a notification to the email address gpl@asus.com, stating the
product and describing the problem (please do NOT send large attachments such as source code archives
etc to this email address).
ii
Contents
Notices........................................................................................................... v
Safety information....................................................................................... vi
About this guide.......................................................................................... vi
AT5IONT-I Series specifications summary.............................................. viii
Chapter 1:
1.1
1.2
1.3
1.4
1.5
Motherboard overview.................................................................. 1-2
1.2.1
1.2.2
1.7
1.8
Layout contents................................................................ 1-3
System memory............................................................................ 1-3
1.4.1
1.4.2
Overview.......................................................................... 1-3
Memory configurations..................................................... 1-4
Expansion slot............................................................................... 1-5
1.5.1
Installing an expansion card............................................ 1-5
1.5.3
PCI Express x4 slot (@ x1 speed, with latch).................. 1-5
Configuring an expansion card........................................ 1-5
Jumpers......................................................................................... 1-6
Connectors.................................................................................... 1-8
1.7.1
1.7.2
Rear panel connectors..................................................... 1-8
Internal connectors........................................................ 1-10
Software support......................................................................... 1-14
1.8.1
Installing an operating system....................................... 1-14
1.8.3
ASUS VideoSecurity...................................................... 1-15
1.8.2
1.8.4
1.8.5
Chapter 2:
2.1
Motherboard layout.......................................................... 1-2
Central Processing Unit (CPU).................................................... 1-3
1.5.2
1.6
Product introduction
Before you proceed...................................................................... 1-1
Support DVD information............................................... 1-14
ASUS Home Theater Gate............................................ 1-17
ASUS @Vibe................................................................. 1-20
BIOS information
Managing and updating your BIOS............................................. 2-1
2.1.1
ASUS Update utility......................................................... 2-1
2.1.3
ASUS CrashFree BIOS.................................................... 2-3
2.1.2
ASUS EZ Flash 2............................................................. 2-2
iii
Contents
2.2
2.3
BIOS setup program..................................................................... 2-4
Main menu..................................................................................... 2-4
2.3.1
System Time.................................................................... 2-5
2.3.3
SATA 1~2......................................................................... 2-5
2.3.2
2.3.4
2.3.5
2.4
2.3.6
2.4.3
Chipset............................................................................. 2-8
2.4.6
Onboard Devices Configuration....................................... 2-8
USB Configuration........................................................... 2-9
PCI PnP......................................................................... 2-10
2.5.1
Suspend Mode................................................................2-11
2.5.3
ACPI APIC Support.........................................................2-11
2.5.4
2.5.5
ACPI 2.0 Support............................................................2-11
APM Configuration..........................................................2-11
Hardware Monitor.......................................................... 2-12
Boot menu................................................................................... 2-12
2.6.1
Boot Device Priority....................................................... 2-12
2.6.3
Security.......................................................................... 2-13
2.6.2
iv
CPU Configuration........................................................... 2-8
Power menu................................................................................. 2-11
2.5.2
2.8
System Information.......................................................... 2-7
JumperFree...................................................................... 2-7
2.4.5
2.7
3rd Party Storage Configuration...................................... 2-6
2.4.1
2.4.4
2.6
Storage Configuration...................................................... 2-6
Advanced menu............................................................................ 2-7
2.4.2
2.5
System Date.................................................................... 2-5
Boot Settings Configuration........................................... 2-13
Tools menu.................................................................................. 2-15
2.7.1
2.7.2
ASUS EZ Flash 2........................................................... 2-15
Express Gate................................................................. 2-15
Exit menu..................................................................................... 2-16
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with manufacturer’s instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
•
•
Increase the separation between the equipment and receiver.
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is required
to assure compliance with FCC regulations. Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department
of Communications.
This class B digital apparatus complies with Canadian ICES-003.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of
Chemicals) regulatory framework, we published the chemical substances in our products at
ASUS REACH website at http://csr.asus.com/english/REACH.htm.
DO NOT throw the motherboard in municipal waste. This product has been designed to
enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin
indicates that the product (electrical and electronic equipment) should not be placed in
municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol
of the crossed out wheeled bin indicates that the battery should not be placed in municipal
waste.
Safety information
Electrical safety
•
•
•
•
•
•
To prevent electric shock hazard, disconnect the power cable from the electric outlet
before relocating the system.
When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
Ensure that your power supply is set to the correct voltage in your area. If you are not
sure about the voltage of the electrical outlet you are using, contact your local power
company.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
Operation safety
•
•
•
•
•
•
Before installing the motherboard and adding devices on it, carefully read all the manuals
that came with the package.
Before using the product, ensure that all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified service
technician or your retailer.
About this guide
This user guide contains the information you need when installing and configuring the
motherboard.
How this guide is organized
This guide contains the following parts:
• Chapter 1: Product introduction
•
vi
This chapter describes the features of the motherboard and the new technology it
supports.
Chapter 2: BIOS information
This chapter tells how to change system settings through the BIOS Setup menus.
Detailed descriptions of the BIOS parameters are also provided.
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task.
CAUTION: Information to prevent damage to the components when trying to complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Where to find more information
Refer to the following sources for additional information and for product and software
updates.
1.
ASUS websites
The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS contact information.
2.
Optional documentation
Your product package may include optional documentation, such as warranty flyers,
that may have been added by your dealer. These documents are not part of the
standard package.
Typography
Bold text
Italics
<Key>
<Key1>+<Key2>+<Key3>
Indicates a menu or an item to select.
Used to emphasize a word or a phrase.
Keys enclosed in the less-than and greater-than sign means
that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or
Return key.
If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+).
Example: <Ctrl>+<Alt>+<D>
vii
AT5IONT-I Series specifications summary
CPU
Chipset
Memory
Graphics
Expansion slot
Storage
Audio
LAN
USB
ASUS special features
Integrated Dual-Core Intel® Atom™ D525 processor
Intel® NM10
Single channel memory architecture
- 2 x SO-DIMM sockets support maximum 4GB unbuffered
non-ECC 800 MHz DDR3 memory modules
* Refer to www.asus.com or this user manual for the Memory
QVL (Qualified Vendors Lists).
**When you install a total memory of 4GB capacity or more,
the operating system may only recognize less than 3GB. We
recommend a maximum of 3GB system memory.
NVIDIA® next generation ION™ graphics processor
Supports CUDA technology
Supports DVI with max. resolution up to 1920 x 1200 x
32 Bpp @60Hz
Supports HDMI with max. resolution up to 1920 x 1080 x
32 Bpp @60Hz
Dual display output supports: DVI&HDMI
Dedicated video memory: 512MB
1 x PCIe x4 slot (@ x1 speed, with latch)
2 x Serial ATA 3Gb/s ports support AHCI Mode
ALC887 (6+2)-channel High Definition Audio CODEC
Supports DTS Surround Sensation Ultra-PC
* Use a chassis with HD audio module in the front panel to
support an 8-channel audio output.
PCIe Gigabit LAN controller
2 x USB 3.0 ports (blue, at back panel)
4 x USB 2.0 ports (2 ports at mid-board, 2 ports at back panel)
ASUS CrashFree BIOS 3
ASUS EZ Flash 2
ASUS MyLogo 2™
ASUS AI NET 2
ASUS Express Gate
Home Theater Gate
Stack Cool 3+
(continued on the next page)
viii
AT5IONT-I Series specifications summary
Rear panel ports
Internal connectors
BIOS features
Accessories
Support DVD contents
Form Factor
1 x PS/2 Keyboard port
1 x PS/2 Mouse port
1 x Optical S/PDIF out port
1 x DVI-D port
1 x HDMI port
1 x eSATA port
1 x LAN (RJ-45) port
2 x USB 2.0/1.1 ports
2 x USB 3.0/2.0 ports
3 x Audio jacks
1 x DC port*
1 x WiFi antenna port*
1 x Bluetooth adapter*
* For AT5IONT-I DELUXE only
1 x USB 2.0/1.1 connector supports additional 2 USB 2.0/1.1
ports
1 x CPU fan connector
1 x Chassis fan connector
1 x Power fan connector
2 x Serial ATA connectors
1 x SATA power connector*
1 x System panel connector
1 x Front panel audio connector
1 x Internal speaker connector
1 x 24-pin EATX power connector**
* For AT5IONT-I DELUXE only
** For AT5IONT-I only
8 Mb Flash ROM, AMI BIOS, PnP, DMI2.0, WfM2.0,
SMBIOS 2.5
2 x Serial ATA cables
1 x I/O shield
1 x User Manual
1 x SATA Power cable*
1 x Remote Controller*
1 x Receiver*
1 x 90W DC adapter*
1 x Power cord*
* For AT5IONT-I DELUXE only
Drivers
ASUS PC Probe II
ASUS Update
Anti-virus software (OEM version)
Mini ITX form factor: 6.75 in x 6.75 in (17.1cm x 17.1cm)
*Specifications are subject to change without notice.
ix
Chapter 1
Product introduction
Thank you for buying an ASUS® AT5IONT-I Series motherboard!
Before you start installing the motherboard, and hardware devices on it, check the items in
your motherboard package. Refer to page ix for the list of accessories.
• AT5IONT-I Series motherboards include AT5IONT-I and AT5IONT-I DELUXE two
models. The package contents vary from models.
• If any of the items is damaged or missing, contact your retailer.
1.1
Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
• Unplug the power cord from the wall socket before touching any component.
• Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due to
static electricity.
• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
• Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so may
cause severe damage to the motherboard, peripherals, or components.
Onboard LED
The motherboard comes with a standby power LED that lights up to indicate that the system
is ON, in sleep mode, or in soft-off mode. This is a reminder that you must shut down
the system and unplug the power cable before removing or plugging in any motherboard
component. The illustration below shows the location of the onboard LED.
SB_PWR
AT5IONT-I DELUXE
ON
Standby Power
OFF
Powered Off
AT5IONT-I DELUXE Onboard LED
1-1
Chapter 1: Product introduction
1.2
Motherboard overview
1.2.1
Motherboard layout
ASUS AT5IONT-I Series motherboards include AT5IONT-I and AT5IONT-I DELUXE two
models. The layout varies with models. The layout illustrations in this user guide are for
AT5IONT-I DELUXE only.
Ensure that you install the motherboard into the chassis in the correct orientation. The edge
with external ports goes to the rear part of the chassis.
3
KBMS
3
RTL
8112
LAN1_USB3.0_12
ICS
9LRS954
Intel®
NM10
USB56
NEC
USB3.0
P17C9X20
AUDIO
SATA1
SATA2
CLRTC
ESATA
_USB34
_BT
Lithium Cell
CMOS Power
JMB
360
SATA_PWR1
Atom D525
4
USBPW56
Intel
®
DDR3 SO-DIMM_A2 (64bit, 204-pin module)
ION2010
SPEAKER
NVIDIA®
DDR3 SO-DIMM_A1 (64bit, 204-pin module)
Super
I/O
DVI
Place this side towards
the rear of the chassis.
SPDIFO_HDMI
PS2_USBPW1-4
ALC
887
5
17.1cm(6.75in)
CPU_FAN
DC_PWR/
WiFi
antenna
CHA_FAN
2
F_PANEL
17.1cm(6.75in)
PWR_FAN
1
6
7
8
8Mb
BIOS
AAFP
PCIEX4_1
AT5IONT-I DELUXE
SB_PWR
13 12
11
10 9
Place four screws into the holes indicated by circles to secure the motherboard to the
chassis. DO NOT overtighten the screws! Doing so can damage the motherboard.
ASUS AT5IONT-I Series
1-2
1.2.2
Layout contents
Connectors/Jumpers/LED
Page
1.
Keyboard/mouse power and USB device
wake-up (3-pin PS2_USBPW1-4)
Connectors/Jumpers/LED
Page
1-7
8.
Clear RTC RAM (3-pin CLRTC)
1-6
2.
Atom D525 processor
1-3
3.
CPU, power, and chassis fan connectors (3-pin
1-11
CPU_FAN, 3-pin PWR_FAN, 3-pin CHA_FAN)
9.
Internal speaker connector (4-pin SPEAKER) 1-12
10.
Serial ATA connectors (7-pin SATA1/2)
1-10
4.
DDR3 SO-DIMM slots
5.
USB device wake-up (3-pin USBPW56)
1-3
11.
USB connector (10-1 pin USB56)
1-11
1-7
12.
Standby power LED (SB_PWR)
6.
1-1
SATA power connector (4-pin SATA_PWR1)
1-13
13.
Front panel audio connector (10-1 pin AAFP)
7.
1-12
System panel connector (10-1 pin F_PANEL)
1-13
1.3
Central Processing Unit (CPU)
The motherboard comes with an onboard Dual-Core Intel® Atom™ D525 processor and a
specially designed CPU heatsink.
D525
AT5IONT-I DELUXE
AT5IONT-I DELUXE CPU - Atom D525
1.4
System memory
1.4.1
Overview
DIMM_A1
DIMM_A2
This motherboard comes with two Double Data Rate 3 (DDR3) Small Outline Dual Inline
Memory Modules (SO-DIMM) sockets. The figure illustrates the location of the DDR3 DIMM
sockets:
AT5IONT-I DELUXE
AT5IONT-I DELUXE 204-pin DDR3 SO-DIMM sockets
1-3
Chapter 1: Product introduction
1.4.2
Memory configurations
You may install 512MB, 1GB, and 2GB unbuffered non‑ECC DDR3 SO-DIMMs into the DIMM
sockets.
• Always install DIMMs with the same CAS latency. For optimum compatibility, it is
recommended that you obtain memory modules from the same vendor.
• Due to the CPU limitation, when you install 4GB or more memory on the motherboard,
the actual usable memory for the OS can be about 3GB or less. For effective use of
memory, we recommend that you do use a maximum of 3GB system memory.
• This motherboard does not support DIMMs made up of 256 megabits (Mb) chips or less.
AT5IONT-I Series Motherboard Qualified Vendors Lists (QVL)
DDR3-1067 MHz capability
Vendors
Part No.
Size
SS/
DS
Chip
Brand
Chip NO.
Timing
Voltage
DIMM socket
support (Optional)
1 DIMM
2 DIMM
APACER
AS01GFA06C7NBGC
1GB
DS
APACER
AM5D5808DEHSBG
7
-
•
•
HYNIX
HMT112S6BFR6C-G7
1GB
DS
HYNIX
H5TQ1G63BFR
-
-
•
•
KINGSTON
KVR1066D3S7/1G
1GB
DS
KTC
D1288JPPDPGD9U
7
1.5V
•
•
KINGSTON
KVR1066D3S7/1G
1GB
DS
ELPIDA
J1108BDBG-DJ-F
7
1.5V
•
•
SAMSUNG
M471B2873EH1-CF8
1GB
DS
SAMSUNG
K4B1G0846E
-
-
•
•
Transcend
JM1066KSU-1G
1GB
DS
Transcend
TK243PDF3
7
-
•
•
ADATA
DDR3 1066(7) SO-DIMM
1GB
DS
Hynix
H5TQ1G83AFP H9C
7
-
•
•
Elixir
M2S1G64CBH8A4P-BE
1GB
DS
Elixir
N2CB1616AP-BE
-
-
•
•
KINGTIGER
1GB DIMM PC3-8500
1GB
DS
QIMONDA
IDSH1G-04A1F1C-10F
-
-
•
•
KINGTIGER
1GB DIMM PC3-8500
1GB
DS
SAMSUNG
K4B1G16460-HCF8
-
-
•
•
DDR3-1333 MHz capability
Vendors
Part No.
Size
SS/DS
Chip
Brand
Chip NO.
Timing
Voltage
DIMM socket
support (Optional)
1 DIMM
2 DIMM
APACER
AS01GFA33C9NBGC
1GB
DS
APACER
AM5D5808AEWSBG
9
-
•
•
HYNIX
HMT112S6TFR8C-H9
1GB
DS
HYNIX
H5TQ1G83TFR
-
-
•
•
HYNIX
HMT325S6BFR8C-H9
2GB
DS
HYNIX
H5TQ2G83BFR
-
-
•
•
KINGSTON
ASU 1333D3S9SR8/1G
1GB
DS
KTC
D1288JELDPGD9U
-
-
•
•
KINGSTON
KVR1333D3S9/1G
1GB
DS
ELPIDA
J1108BDBG-DJ-F
9
1.5V
•
•
ASINT
SSY3128MB-EDJED
1GB
DS
ELPIDA
J1108BDBG-DJ-F
-
-
•
•
DDR3 1333MHz and DDR3 1067MHz memory modules run at 800MHz on AT5IONT-I
Series motherboards.
Visit the ASUS website at www.asus.com for the latest QVL.
ASUS AT5IONT-I Series
1-4
1.5
Expansion slot
In the future, you may need to install an expansion card. The following sub‑sections describe
the slot and the expansion cards that it supports.
Unplug the power cord before adding or removing expansion cards. Failure to do so may
cause you physical injury and damage motherboard components.
1.5.1
Installing an expansion card
To install an expansion card:
1.
Before installing the expansion card, read the documentation that came with it and
make the necessary hardware settings for the card.
2.
Remove the system unit cover (if your motherboard is already installed in a chassis).
3.
Remove the bracket opposite the slot that you intend to use. Keep the screw for later
use.
4.
Align the card connector with the slot and press firmly until the card is completely
seated on the slot.
5.
Secure the card to the chassis with the screw you removed earlier.
6.
Replace the system cover.
1.5.2
Configuring an expansion card
After installing the expansion card, configure it by adjusting the software settings.
1.
Turn on the system and change the necessary BIOS settings, if any. See Chapter 2 for
information on BIOS setup.
2.
Assign an IRQ to the card.
3.
Install the software drivers for the expansion card.
1.5.3
PCI Express x4 slot (@ x1 speed, with latch)
This motherboard supports PCI Express x4 network cards, SCSI cards and other cards that
comply with the PCI Express specifications.
1-5
Chapter 1: Product introduction
1.6
1.
Jumpers
Clear RTC RAM (3-pin CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can
clear the CMOS memory of date, time, and system setup parameters by erasing
the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in
CMOS, which include system setup information such as system passwords.
2
1
2
3
CLRTC
AT5IONT-I DELUXE
Normal
(Default)
Clear RTC
AT5IONT-I DELUXE Clear RTC RAM
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3
for about 5-10 seconds, then move the cap back to pins 1-2.
3. Plug the power cord and turn ON the computer.
4. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter
data.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default
position. Removing the cap will cause system boot failure!
If the steps above do not help, remove the onboard battery and move the jumper again to
clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.
ASUS AT5IONT-I Series
1-6
2.
(Default)
Keyboard/mouse power and USB device wake-up (3-pin PS2_USBPW1-4)
This jumper allows you to enable or disable the keyboard/mouse and USB port 1-4
wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up
the computer by pressing a key on the keyboard, clicking the mouse or using a USB
device. This feature requires an ATX power supply that can supply at least 1A on the
+5VSB lead, and a corresponding setting in the BIOS. The USBPW1-4 jumper is for
the rear USB ports.
PS2_USBPW1-4
1
2 3
2
+5V
+5VSB
(Default)
AT5IONT-I DELUXE
AT5IONT-I DELUXE PS2 Keyboard/Mouse power setting
and USB device wake-up
The total current consumed must NOT exceed the power supply capability (+5VSB)
whether under normal condition or in sleep mode.
3. USB device wake-up (3-pin USBPW56)
Set this jumper to +5V to wake up the computer from S1 sleep mode (CPU stopped,
DRAM refreshed, system running in low power mode) using the connected USB
devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU,
DRAM in slow refresh, power supply in reduced power mode).
2
1
2
3
USBPW56
AT5IONT-I DELUXE
+5V
(Default)
+5VSB
AT5IONT-I DELUXE USB Device Wake-up
• The USB device wake-up feature requires a power supply that can provide 500mA on
the +5VSB lead for each USB port; otherwise, the system would not power up.
• The total current consumed must NOT exceed the power supply capability (+5VSB)
whether under normal condition or in sleep mode.
1-7
Chapter 1: Product introduction
1.7
Connectors
1.7.1
Rear panel connectors
1
2
3
15
14
13
4
12
11
10
5
9
6 7
8
1.
WLAN antenna port (for AT5IONT-I DELUXE only). This port connects to the WLAN
antenna.
2.
PS/2 Mouse port (green). This port is for a PS/2 mouse.
3.
Optical S/PDIF Out port. This port connects to an external audio output device via an
optical S/PDIF cable.
4.
Onboard Bluetooth module (for AT5IONT-I DELUXE only). This onboard Bluetooth
module allows wireless connection and data transfer between your system and other
Bluetooth devices.
• Under Windows® 7 OS, to achieve the complete Bluetooth functions, download the latest
Bluetooth driver from the ASUS support wedsite at http://support.asus.com.
• Bluetooth Electrical Specification:
Bluetooth specification V.2.1 compliant;
Transmission rate up to 3 Mbps;
Working distance up to 10 meters;
Intergrated 32-bit CPU with 32KB data RAM and 256KB program RAM;
5V single supply voltage.
• Under Windows® XP, if the Bluetooth Driver item is not displayed on the Support DVD’s
Drivers screen, follow the steps below:
1. Shut down your computer and switch off the Power Supply Unit (PSU).
2. Switch on the PSU and boot up your computer.
3. Open the Support DVD and click ASUS InstAll.
5.
LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub. Refer to the table below for the LAN port LED indications.
LAN port LED indications
ACT/LINK LED
ACT/LINK SPEED
LED
LED
SPEED LED
Status
Description
Status
Description
OFF
No link
OFF
10 Mbps connection
ORANGE
Linked
ORANGE
100 Mbps connection
BLINKING
Data activity
GREEN
1 Gbps connection
ASUS AT5IONT-I Series
LAN port
1-8
6.
Line In port (light blue). This port connects to the tape, CD, DVD player, or other
audio sources.
7.
Line Out port (lime). This port connects to a headphone or a speaker. In the 4, 6, and
8-channel configurations, the function of this port becomes Front Speaker Out.
8.
Microphone port (pink). This port connects to a microphone.
Refer to the audio configuration table below for the function of the audio ports in 2, 4, 6, or
8-channel configuration.
Audio 2, 4, 6, or 8-channel configuration
Port
Headset 2-channel
4-channel
6-channel
8-channel
Light Blue (Rear panel)
Line In
Rear Speaker Out
Rear Speaker Out
Rear Speaker Out
Lime (Rear panel)
Line Out
Front Speaker Out
Front Speaker Out
Front Speaker Out
Pink (Rear panel)
Mic In
Mic In
Bass/Center
Bass/Center
Lime (Front panel)
–
–
–
Side Speaker Out
To configure an 8-channel audio output:
Use a chassis with HD audio module in the front panel to support 8-channel audio output.
9.
USB 3.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are for
USB 3.0 devices.
10. eSATA port. This port connects to an external Serial ATA hard disk drive.
11.
USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are for
USB 2.0 devices.
12. DVI-D port. This port is for any DVI-D compatible device and is HDCP compliant
allowing playback of HD DVD, Blu-ray, and other protected content.
13. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-Ray, and other protected
content.
14. PS/2 Keyboard port (purple). This port is for a PS/2 keyboard.
15. DC power port (for AT5IONT-I DELUXE only). This port connects to an DC power
adapter.
1-9
Chapter 1: Product introduction
1.7.2
1.
Internal connectors
Serial ATA connectors (7-pin SATA1, SATA2)
These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk
drives and optical disk drives. The Serial ATA 3Gb/s is backward compatible with the
Serial ATA 1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster
than the standard parallel ATA (133 MB/s).
GND
RSATA_RXN1
RSATA_RXP1
GND
RSATA_TXN1
RSATA_TXP1
GND
SATA1
AT5IONT-I DELUXE
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXP2
RSATA_RXN2
GND
SATA2
AT5IONT-I DELUXE SATA connectors
• Install the Windows® XP Service Pack 2 or later versions before using Serial ATA.
2.
ATX power connector (24-pin EATXPWR) (for AT5IONT-I only)
This connector is for an ATX power supply. The plug from the power supply is designed
to fit this connector in only one orientation. Find the proper orientation and push down
firmly until the connector completely fits.
AT5IONT-I
AT5IONT-I ATX power connector
• For a fully configured system, we recommend that you use a power supply unit (PSU)
that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum
power of 90 W.
• We recommend that you use a PSU with higher power output when configuring a
system with more power-consuming devices. The system may become unstable or may
not boot up if the power is inadequate.
• If you are uncertain about the minimum power supply requirement for your system,
refer to the Recommended Power Supply Wattage Calculator at http://support.asus.
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
ASUS AT5IONT-I Series
1-10
3.
USB connector (10-1 pin USB56)
This connector is for a USB 2.0 port. Connect the USB module cable to this connector,
then install the module to a slot opening at the back of the system chassis. This USB
connector complys with USB 2.0 specification that supports up to 480 Mbps connection
speed.
USB56
AT5IONT-I DELUXE
PIN 1
AT5IONT-I DELUXE USB2.0 connector
Never connect a 1394 cable to the USB connector. Doing so will damage the motherboard!
The USB module cable is purchased separately.
4.
CPU, power, and chassis fan connectors (3-pin CPU_FAN, 3-pin PWR_FAN, 3-pin
CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
CPU_FAN
PWR_FAN
Rotation
+12V
GND
Rotation
+12V
GND
Insufficient air flow inside the system may damage the motherboard components. These
are not jumpers! Do not place jumper caps on the fan connectors!
CHA_FAN
AT5IONT-I DELUXE
GND
+12V
Rotation
AT5IONT-I DELUXE fan connectors
1-11
Chapter 1: Product introduction
Front panel audio connector (10-1 pin AAFP)
NC
AGND
NC
NC
SENSE2_RETUR
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
GND
PRESENCE#
SENSE1_RETUR
5.
AAFP
AT5IONT-I DELUXE
HD-audio-compliant
pin definition
PIN 1
MIC2
MICPWR
Line out_R
NC
Line out_L
PORT1 L
PORT1 R
PORT2 R
SENSE_SEND
PORT2 L
PIN 1
Legacy AC’97
compliant definition
AT5IONT-I DELUXE Front panel audio connector
• We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.
• If you want to connect a high-definition front panel audio module to this connector, set
the Front Panel Support Type item in the BIOS setup to [HD Audio]. If you want to
connect an AC'97 front panel audio module to this connector, set the item to [AC97].
By default, this connector is set to [HD Audio]. See section 2.4.4 Onboard Devices
Configuration for details.
6.
Internal speaker connector (4-pin SPEAKER)
The 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
SPEAKER
Speaker Out
GND
GND
+5V
PIN 1
AT5IONT-I DELUXE
AT5IONT-I DELUXE Speaker out connector
ASUS AT5IONT-I Series
1-12
7.
System panel connector (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.
AT5IONT-I DELUXE
RESET
HD_LED
Reset
Ground
IDE_LEDIDE_LED+
GND
PWR
PLEDPLED+
PIN 1
PWR LED PWR BTN
F_PANEL
AT5IONT-I DELUXE System panel connector
•
•
•
•
8.
System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
Hard disk drive activity LED (2-pin HD_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The HD LED lights up or flashes when data is read from or written to
the HDD.
ATX power button/soft-off button (2-pin PWRBTN)
This 2-pin connector is for the system power button.
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
SATA power connectors (4-pin SATA_PWR1) (for AT5IONT-I DELUXE only)
This connectors is for SATA power cable. The power cable plug is designed to fit this
connector in only one orientation. Find the proper orientation and push down firmly until
the connector completely fit.
AT5IONT-I DELUXE
AT5IONT-I DELUXE SATA power connector
1-13
Chapter 1: Product introduction
1.8
Software support
1.8.1
Installing an operating system
This motherboard supports Windows® XP/Vista/7 Operating Systems (OS). Always install the
latest OS version and corresponding updates to maximize the features of your hardware.
• Motherboard settings and hardware options vary. Refer to your OS documentation for
detailed information.
• Ensure that you install Windows® XP Service Pack 3 or later versions / Windows® Vista
Service Pack 1 or later versions before installing the drivers for better compatibility and
system stability.
1.8.2
Support DVD information
The Support DVD that comes with the motherboard package contains the drivers, software
applications, and utilities that you can install to avail all motherboard features.
The contents of the Support DVD are subject to change at any time without notice. Visit the
ASUS website at www.asus.com for updates.
To run the Support DVD
Place the Support DVD to the optical drive. If Autorun is enabled in your computer, the
DVD automatically displays the Specials screen which contains the unique feature of ASUS
motherboard. Click Drivers, Utilities, Make Disk, Manual, and Contact tabs to display their
respective menus.
The following screen is for reference only.
Click an icon to
display Support DVD/
motherboard information
Click an item to install
If Autorun is NOT enabled in your computer, browse the contents of the Support DVD to
locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run
the DVD.
ASUS AT5IONT-I Series
1-14
1.8.3
ASUS VideoSecurity
ASUS VideoSecurity is a powerful monitoring and motion detection feature that enables users to
keep an eye on their properties from a remote location via the Internet and a wide range of video
capturing devices.
System requirements
Ensure that you have the following softwares and harwares installed on your computer before
using the ASUS VideoSecurity.
Software:
•
Microsoft® Windows 2000/XP/Vista/7 with DirectX 9.0a or later versions
•
WDM capture driver for your video capture devices
•
Internet connection with Microsoft® IE 6 SP1 or later versions
•
Microsoft® Media Player 9.0 or later versions
Hardware:
•Video capture devices, like webcams, CCD, V8, or Hi-8, which support UYVY video format.
•An audio card or chip onboard is necessary if you want to play the warning wave file.
Launching ASUS VideoSecurity
1.
Install ASUS VideoSecurity from the motherboard support DVD.
2.
To launch the ASUS VideoSecurity from the Windows® desktop, click Start > All Programs
> ASUS > ASUS VideoSecurity > ASUS VideoSecurity. The VideoSecurity main screen
appears.
ASUS VideoSecurity main screen
Click to close VodeoSecurity
Click to minimize the main window
Click to open the Help file
Click to open the setup wizard
Click to check video source
Click to define the detecting
region
Displays working status
Displays images detected
Click to delete all image files
Click to view the image file
Click to delete the image file
Click to start/stop detecting
1-15
Chapter 1: Product introduction
VideoSecurity Setting screen
To launch the setting screen, click
from the main screen.
Click
for the main screen to refer to the Help file for details on how to setup
VideoSecurity.
ASUS AT5IONT-I Series
1-16
1.8.4
ASUS Home Theater Gate
The ASUS Home Theater Gate, specially designed for the AT5IONT-I series, allows you
to easily and quickly launch media applications to enjoy your music and movies. With the
bundled remote controller, you can launch the ASUS Home Theater Gate and start media
applications with just one touch.
Launching Home Theater Gate
1.
Install Home Theater Gate from the motherboard support DVD.
2.
To launch Home Theater Gate ,click Start > All Programs > ASUS > ASUS Home
Theater Gate > ASUS Home Theater Gate 1.xx.xx. The Home Theater Gate main
window appears.
Home Theater Gate main window
Click to minimize the Home Theater Gate window. Click the Home Theater
Gate icon in the Windows® notification area to restore the window
Click to return to the main window
Click to return to the previous page
Click to close the Home
Theater Gate window
Click to switch to the full
screen mode
View photos
Playback videos
Configure the Media Path
Settings, Internet Radio
Settings, and Favorite Music
Create your
Playback Internet Radio
music playlists
The Internet Radio function is included in the bundled trial version software “mediaU Player
Mercury“. You may use the Top 20, Station Overview, History, Recommendations,
Station Search, and Recording Schedule functions without registering the software and
within the evaluation period.
1-17
Chapter 1: Product introduction
Internet Radio channel setting
Long press the channel number and the station information on the currently playing station
will be saved to that channel number.
Supported type
Resolution
Normal display under 1024 x 600 – 1920 x 1080
Music
mp3, midi, wav, wma and cda
Video
avi, mp4, mpeg, rmvb, wmv, rm, mov, asf, mpg, vob and dat
Photo
bmp, dib, gif, jpg, jpeg, png, tif, tiff
DTS
Video player
Music player
Windows® Vista™ and Window® 7 operating systems (HDMI and analog out
only)
Windows® Media Player, PowerDVD 8 (Cyberlink), WinDVD 9 (Corel/
InterVideo), KMPlayer, Media Player Classic, RealPlayer and Arcsoft
TotalMedia Theatre 3
Windows® Media Player, Winamp, KMPlayer, RealPlayer, iTunes
• Visit the ASUS website at http://support.asus.com/download/download.
aspx?SLanguage=en-us for the latest supported type.
• Due to Window® XP limitation, you have to install the UDF Reader to recognize the
Blu-ray disc.
ASUS AT5IONT-I Series
1-18
Using the remote controller (for AT5IONT-I DELUXE only)
Use the remote controller to launch the ASUS Home Theater Gate and start media
applications.
Connect the IR receiver to the USB 2.0 port 1 or 2 before using the remote controller.
Power on/off*
Mute
Play/Pause
Fast rewind
Stop
Previous track
Volume up
OK
Scroll left
Fast forward
Next track
Volume down
Scroll up
Scroll right
Scroll down
Main window
Previous page
Switch windows
Full screen
Internet Radio**
Tranquil mode****
Music***
DTS on/off
Launch Home Theater
Gate/Minimize Home
Theater Gate window
* T
his button follows the behavior of the system sleep button. Actual behavior of the system
sleep button can be customized in Windows® Control Panel > Power Options.
** Set up the Internet radio channel 1 to 7 before using the Internet Radio.
*** Set the Favorite Music in the Settings or Music mode first.
**** This motherboard is fanless-designed. The Tranquil mode button is functionless on this
motherboard.
1-19
Chapter 1: Product introduction
1.8.5
ASUS @Vibe
ASUS @Vibe allows you to enjoy online entertainment contents including Radio, Live TV and
Games, etc.
• The ASUS @Vibe service contents differ for each territory.
• This utility does not work on Windows® 64-bit XP OS.
Launching ASUS @Vibe
1.
Install ASUS @Vibe from the motherboard support DVD.
2.
To launch ASUS @Vibe ,click Start > All Programs > ASUS > ASUS VIBE > ASUS
VIBE.
ASUS AT5IONT-I Series
1-20
Chapter 2
BIOS information
2.1
Managing and updating your BIOS
Save a copy of the original motherboard BIOS file to a USB flash disk in case you need to
restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS Update
utility.
2.1.1
ASUS Update utility
The ASUS Update is a utility that allows you to manage, save, and update the motherboard
BIOS in Windows® environment.
• ASUS Update requires an Internet connection either through a network or an Internet
Service Provider (ISP).
• This utility is available in the support DVD that comes with the motherboard package.
Installing ASUS Update
To install ASUS Update:
1.
Place the support DVD in the optical drive. The Drivers menu appears.
2.
Click the Utilities tab, then click ASUS Update.
3.
Follow the onscreen instructions to complete the installation.
Quit all Windows® applications before you update the BIOS using this utility.
Updating the BIOS
To update the BIOS:
1.
From the Windows® desktop, click Start > Programs > ASUS > ASUSUpdate >
ASUSUpdate to launch the ASUS Update utility.
2.
From the dropdown list, select any of the updating process:
Updating from the Internet
a.
Select Update BIOS from the Internet, then click Next.
b.
Select the ASUS FTP site nearest you to avoid network traffic, or click Auto Select then click Next.
c.
From the FTP site, select the BIOS version that you wish to download then click Next.
ASUS AT5IONT-I Series
2-1
The ASUS Update utility is capable of updating itself through the Internet. Always update
the utility to avail all its features.
Updating from a BIOS file
a.
Select Update BIOS from a file, then click Next.
b.
Locate the BIOS file from the Open window, then click Open.
3.
Follow the onscreen instructions to complete the updating process.
2.1.2
ASUS EZ Flash 2
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS‑based
utility.
Before you start using this utility, download the latest BIOS file from the ASUS website at
www.asus.com.
To update the BIOS using EZ Flash 2:
1.
Insert the USB flash disk that contains the latest BIOS file to the USB port, then launch
EZ Flash 2 in any of these two ways:
•
Press <Alt> + <F2> during POST.
•
Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and press <Enter> to enable it.
Press <Tab> to switch between drives until the correct BIOS file is found.
ASUSTek EZ Flash 2 BIOS ROM Utility V3.44
FLASH TYPE: WINBOND W25P80
Current ROM
BOARD: AT5IONT-I Series
VER: 0214 (H:01 B:07)
DATE: 05/19/2010
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
PATH: A:\
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
2.
2-2
[Tab] Switch
[B] Backup
[V] Drive Info
[ESC] Exit
When the correct BIOS file is found, EZ Flash 2 performs the BIOS update process
and automatically reboots the system when done.
Chapter 2: BIOS information
• This function supports USB flash disks with FAT 32/16 format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
2.1.3
ASUS CrashFree BIOS
The ASUS CrashFree BIOS is an auto recovery tool that allows you to restore the BIOS file
when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS
file using the motherboard support DVD or a removable device that contains the updated
BIOS file.
• Before using this utility, rename the BIOS file in the removable device into
AT5IONT.ROM (for AT5IONT-I DELUXE) or AT5IONTI.ROM (for AT5IONT-I).
• The BIOS file in the support DVD may not be the latest version. Download the latest
BIOS file from the ASUS website at www.asus.com.
• The removable device that ASUS CrashFree BIOS support vary with motherboard
models. For motherboards without the floppy connector, prepare a USB flash disk before
using this utility.
Recovering the BIOS
To recover the BIOS:
1.
Turn on the system.
2.
Insert the support DVD to the optical drive or the removable device that contains the
BIOS file to the USB port or to the floppy disk drive, if supported.
3.
The utility automatically checks the devices for the BIOS file. When found, the utility
reads the BIOS file and starts flashing the corrupted BIOS file.
4.
Turn off the system after the utility completes the updating process and turn on again.
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause
system boot failure!
Ensure to load the BIOS default settings to ensure system compatibility and stability. Select
the Load Setup Defaults item under the Exit menu. Refer to section 2.8 Exit menu for
details.
ASUS AT5IONT-I Series
2-3
2.2
BIOS setup program
Use the BIOS Setup program to update the BIOS or configure its parameters. The BIOS
screens include navigation keys and brief online help to guide you in using the BIOS Setup
program.
Entering BIOS Setup at startup
To enter BIOS Setup at startup:
• Press <Delete> during the Power-On Self Test (POST). If you do not press <Delete>,
POST continues with its routines.
Entering BIOS Setup after POST
To enter BIOS Setup after POST:
• Press <Ctrl>+<Alt>+<Del> simultaneously.
•
•
Press the reset button on the system chassis.
Press the power button to turn the system off then back on. Do this option only if you
failed to enter BIOS Setup using the first two options.
Using the power button, reset button, or the <Ctrl>+<Alt>+<Del> keys to force reset from
a running operating system can cause damage to your data or system. We recommend to
always shut down the system properly from the operating system.
• The default BIOS settings for this motherboard apply for most conditions to ensure
optimum performance. If the system becomes unstable after changing any BIOS
settings, load the default settings to ensure system compatibility and stability. Select the
Load Setups Default item under the Exit Menu. See section 2.8 Exit Menu.
• The BIOS setup screens shown in this section are for reference purposes only, and may
not exactly match what you see on your screen.
• Visit the ASUS website at www.asus.com to download the latest BIOS file for this
motherboard.
2.3
Main menu
When you enter the BIOS Setup program, the Main menu screen appears, giving you an
overview of the basic system information.
Main
Advanced
Power
Version 0214
AT5IONT-I DELUXE BIOS Setup
Boot
Tools
Exit
System Time
System Date
SATA 1
SATA 2
[00:31:48]
[Tue 01/01/2002]
Use [ENTER], [TAB] or
[SHIFT-TAB] to select
a field.
[Not Detected]
[Not Detected]
Use [+] or [-] to
configure system time.
Storage Configuration
3rd Party Storage Configuration
System Information
+-
Tab
F1
F10
ESC
Select Screen
Select Item
Change Field
Select Field
General Help
Save and Exit
Exit
v02.58 (C)Copyright 1985-2010, American Megatrends, Inc.
2-4
Chapter 2: BIOS information
2.3.1
System Time [xx:xx:xx]
2.3.2
System Date [Day xx/xx/xxxx]
2.3.3
SATA 1~2
Allows you to set the system time.
Allows you to set the system date.
While entering Setup, the BIOS automatically detects the presence of SATA devices. There
is a separate sub-menu for each SATA device. Select a device item then press <Enter> to
display the SATA device information.
The BIOS automatically detects the values opposite the dimmed items (Device, Vendor, Size,
LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART Monitoring). These
values are not user-configurable. These items show Not Detected if no Serial ATA device is
installed in the system.
Type [Auto]
Selects the type of SATA drive. Setting to Auto allows automatic selection of the appropriate
SATA device type. Select CDROM if you are specifically configuring a CD-ROM drive. Select
ARMD (ATAPI Removable Media Device) if your device is either a ZIP, LS-120, or MO drive.
Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]
LBA/Large Mode [Auto]
Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device
supports this mode, and if the device was not previously formatted with LBA mode disabled.
Configuration options: [Disabled] [Auto]
Block (Multi-sector Transfer) M [Auto]
Enables or disables data multi-sectors transfers. When set to [Auto], the data transfer from
and to the device occurs multiple sectors at a time if the device supports multi-sector transfer
feature. When set to [Disabled], the data transfer from and to the device occurs one sector
at a time. Configuration options: [Disabled] [Auto]
PIO Mode [Auto]
Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled]
ASUS AT5IONT-I Series
2-5
2.3.4
Storage Configuration
The items in this menu allow you to set or change the configurations for the SATA devices
installed in the system. Select an item then press <Enter> if you want to configure the item.
Configure SATA as [IDE]
Allows you to set the SATA mode. Configuration options: [IDE] [AHCI] [Disabled]
ATA Run Mode Configuration [Enhanced]
Allows you to set the ATA controller operating mode. Configuration options: [Compatible]
[Enhanced]
2.3.5
3rd Party Storage Configuration
The items in this menu allow you to set or change the configurations for the 3rd party SATA
devices installed in the system. Select an item then press <Enter> if you want to configure
the item.
JMicron 36x ATA Controller [IDE Mode]
Allows you to set the JMicron 36x ATA controller operating mode. Configuration options:
[Disabled] [IDE Mode]
ESATA
The BIOS automatically detects the values opposite the dimmed items (Device, Vendor,
Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART Monitoring).
These values are not user-configurable. These items show Not Detected if no eSATA device
is installed in the system.
LBA/Large Mode [Auto]
Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the
device supports this mode, and if the device was not previously formatted with LBA
mode disabled. Configuration options: [Disabled] [Auto]
Block (Multi-sector Transfer) M [Auto]
Enables or disables data multi-sectors transfers. When set to [Auto], the data transfer
from and to the device occurs multiple sectors at a time if the device supports multisector transfer feature. When set to [Disabled], the data transfer from and to the
device occurs one sector at a time. Configuration options: [Disabled] [Auto]
PIO Mode [Auto]
Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled]
2-6
Chapter 2: BIOS information
2.3.6
System Information
This menu gives you an overview of the general system specifications. The BIOS
automatically detects the items in this menu.
BIOS Information
Displays the auto-detected BIOS information.
Processor
Displays the auto-detected CPU specification.
System Memory
Displays the auto-detected system memory.
2.4
Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other system
devices.
Take caution when changing the settings of the Advanced menu items. Incorrect field
values can cause the system to malfunction.
Main
Advanced
Power
AT5IONT-I DELUXE BIOS Setup
Boot
Tools
Exit
Version 0214
JumperFree
CPU Configuration
Chipset
Onboard Devices Configuration
USB Configuration
PCIPnP
2.4.1
JumperFree
The items in this menu allows you to adjust the system frequency/voltage.
Ai Overclocking [Auto]
Allows selection of CPU overclocking options to achieve desired CPU internal frequency.
Select either one of the preset overclocking configuration options:
Manual - allows you to individually set overclocking parameters.
Auto - loads the optimal settings for the system.
The following item appears only when you set the AI Overclocking item to [MANUAL].
CPU Frequency [xxx]
Displays the frequency sent by the clock generator to the system bus and PCI bus. The
value of this item is auto-detected by the BIOS. Use the <+> and <-> keys to adjust
the CPU frequency. You can also type the desired CPU frequency using the numeric
keypad. The values range from 150 to 250.
ASUS AT5IONT-I Series
2-7
Memory Over Voltage [Auto]
Manually set memory voltage or set to Auto for safe mode. Configuration options: [Auto]
[+56mV] [+112mV]
Vcore Over Voltage [Auto]
Sets the CPU Vcore over voltage. Configuration options: [Auto] [+47mV] [+94mV] [+141mV]
2.4.2
CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically
detects.
Max CPUID Value Limit [Disabled]
Allows you to determine whether to limit CPUID maximum value. Set this item to [Disabled]
for Windows XP operating system; set this item to [Enabled] for legacy operating system
such as Windows NT4.0. Configuration options: [Disabled] [Enabled]
Execute-Disable Bit Capability [Enabled]
Allows you to enable or disable the No-Execution Page Protection Technology. Setting this
item to [Disabled] forces the XD feature flag to always return to zero (0). Configuration
options: [Disabled] [Enabled]
Hyper Threading Technology [Enabled]
Allows you to enable or disable the Intel® Hyper Threading technology. Configuration options:
[Disabled] [Enabled]
2.4.3
Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then
press <Enter> to display the sub-menu.
North Bridge Configuration
DRAM Frequency [Auto]
Allows you to set the DIMM operating frequency. Configuration options: [Auto] [667 MHz]
[800 MHz]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configurating DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
2.4.4
Onboard Devices Configuration
Onboard LAN [Enabled]
Allows you to enable or disable the onboard LAN controller.
Configuration options: [Enabled] [Disabled]
Onboard LAN Boot ROM [Disabled]
Allows you to enable or disable the boot ROM in the onboard LAN controller. This item
appears only when the Onboard LAN item is set to Enabled. Configuration options:
[Disabled] [Enabled]
2-8
Chapter 2: BIOS information
The following item appears only on AT5IONT-I DELUXE motherboard.
Onboard Wireless [Enabled]
Allows you to enable or disable the onboard Wireless function.
Configuration options: [Enabled] [Disabled]
Onboard USB 3.0 Controller [Enabled]
Allows you to enable or disable the onboard USB 3.0 controller.
Configuration options: [Enabled] [Disabled]
The following item appears only on AT5IONT-I DELUXE motherboard.
Onboard Bluetooth [Enabled]
Allows you to enable or disable the onboard Bluetooth controller.
Configuration options: [Enabled] [Disabled]
Audio Controller [Enabled]
Allows you to set the audio controller. Configuration options: [Enabled] [Disabled]
Front Panel Support Type [HD Audio]
Allows you to select the front panel support type. If High Definition Audio Front Panel
used, set this item to [HD Audio] mode. Configuration options: [AC97] [HD Audio]
2.4.5
USB Configuration
The items in this menu allows you to change the USB-related features. Select an item then
press <Enter> to display the configuration options.
The Module Version and USB Devices Enabled items show the auto-detected values. If no
USB device is detected, the item shows None.
USB Functions [Enabled]
Allows you to disable or enable the USB functions.
Configuration options: [Disabled] [Enabled]
USB 2.0 Controller [Enabled]
Allows you to enable or disable USB 2.0 controller.
Configuration options: [Enabled] [Disabled]
Legacy USB Support [Auto]
Allows you to enable or disable support for Legacy USB storage devices, including USB flash
drives and USB hard drives. Setting to [Auto] allows the system to detect the presence of
USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB
device is detected, the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
ASUS AT5IONT-I Series
2-9
USB 2.0 Controller Mode [HiSpeed]
Allows you to configure the USB 2.0 controller in HiSpeed (480Mbps) or Full Speed
(12Mbps). Configuration options: [FullSpeed] [HiSpeed]
The following items may only appear when a USB storage device is plugged.
USB Mass Storage Device Configuration
USB Mass Storage Reset Delay [20 Sec]
Allows you to set the maximum time that the BIOS waits for the USB storage device to
initialize. Configuration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec]
Emulation Type [Auto]
Allows you to select the emulation type. Configuration options: [Auto] [Floppy] [Forced
FDD] [Hard Disk] [CDROM]
2.4.6
PCI PnP
The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.
The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA
devices, and setting the memory size block for legacy ISA devices.
Take caution when changing the settings of the PCI PnP menu items. Incorrect field values
can cause the system to malfunction.
Plug and Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set to [Yes] and if you
install a Plug and Play operating system, the operating system configures the Plug and Play
devices not required for boot. Configuration options: [No] [Yes]
2-10
Chapter 2: BIOS information
2.5
Power menu
The Power menu items allow you to change the settings for the Advanced Power
Management (APM). Select an item then press <Enter> to display the configuration options.
Main
Advanced
Power
AT5IONT-I DELUXE BIOS Setup
Boot
Tools
Exit
Suspend Mode
ACPI 2.0 Support
ACPI APIC Support
[S3 only]
[Enabled]
[Enabled]
Version 0214
Select the ACPI state
used for System
Suspend.
APM Configuration
Hardware Monitor
2.5.1
Suspend Mode [S3 only]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used
for system suspend. Configuration options: [S3 Only]
[S3 Only] - Enables the system to enter the ACPI S3 (Suspend to RAM) sleep state
(default). In S3 sleep state, the system appears to be off and consumes less power
than in the S1 state. When signaled by a wake-up device or event, the system resumes
to its working state exactly where it was left off.
2.5.2
ACPI 2.0 Support [Enabled]
2.5.3
ACPI APIC Support [Enabled]
2.5.4
APM Configuration
Allows you to add more tables for Advanced Configuration and Power Interface (ACPI) 2.0
specifications. Configuration options: [Disabled] [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI)
support in the Application-Specific Integrated Circuit (ASIC). When set to Enabled, the ACPI
APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
Restore on AC Power Loss [Power Off]
When set to [Power Off], the system goes into off state after an AC power loss. When set
to [Power On], the system goes on after an AC power loss. When set to [Last State], the
system goes into either off or on state, whatever the system state was before the AC power
loss. Configuration options: [Power Off] [Power On] [Last State]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is set to
Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute, and RTC Alarm
Second appear with set values. Configuration options: [Disabled] [Enabled]
Power On By PME [Disabled]
Allows you to enable or disable PME to generate a wake event. This feature requires an ATX
power supply that provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]
ASUS AT5IONT-I Series
2-11
Power On By PS/2 Keyboard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system. This feature requires
an ATX power supply that provides at least 1A on the +5VSB lead. Configuration options:
[Disabled] [Space Bar] [Power Key] [Ctrl-Esc]
Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse to turn on the
system. This feature requires an ATX power supply that provides at least 1A on the +5VSB
lead. Configuration options: [Disabled] [Enabled]
2.5.5
Hardware Monitor
CPU/GPU Temperature [xxxºC/xxxºF] or [Ignored]
The onboard hardware monitor automatically detects and displays the CPU/GPU
temperature. Select Ignored if you do not wish to display the detected temperatures.
CPU/Chassis/Power Fan Speed [xxxxRPM] or [Ignored]
The onboard hardware monitor automatically detects and displays the CPU/chassis/power
fan speeds in rotations per minute (RPM). If the fan is not connected to the motherboard, the
field shows N/A. Select Ignored if you do not wish to display the detected speed.
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage [xxxV] or [Ignored]
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators.
2.6
Boot menu
The Boot menu items allow you to change the system boot options. Select an item then
press <Enter> to display the sub-menu.
Main
Advanced
Power
AT5IONT-I DELUXE BIOS Setup
Boot
Tools
Exit
Boot Settings
Boot Device Priority
Boot Settings Configuration
Security
2.6.1
Version 0214
Specifies the Boot
Device Priority
sequence.
A virtual floppy disk
drive (Floppy Drive B:)
may appear when you set
the CD-ROM drive as the
first boot device.
Boot Device Priority
1st ~ xxth Boot Device
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system. Configuration options: [Removable Dev.] [Hard Drive]
[ATAPI CD-ROM] [Disabled]
2-12
Chapter 2: BIOS information
• To select the boot device during system startup, press <F8> when ASUS Logo appears.
• To access Windows® OS in Safe Mode, do any of the following:
•
Press <F5> when ASUS Logo appears.
•
Press <F8> after POST.
2.6.2
Boot Settings Configuration
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to
decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the
POST items. Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
This allows you to enable or disable the full screen logo display feature. Configuration
options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo2™ feature.
AddOn ROM Display Mode [Force BIOS]
Sets the display mode for option ROM. Configuration options: [Force BIOS] [Keep Current]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock. Configuration options: [Off] [On]
Wait For ‘F1’ If Error [Enabled]
When set to Enabled, the system waits for the F1 key to be pressed when error occurs.
Configuration options: [Disabled] [Enabled]
Hit ‘DEL’ Message Display [Enabled]
When set to [Enabled], the system displays the message Press DEL to run Setup during
POST. Configuration options: [Disabled] [Enabled]
2.6.3
Security
The Security menu items allow you to change the system security settings. Select an item
then press <Enter> to display the configuration options.
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor Password item
on top of the screen shows the default Not Installed. After you set a password, this item
shows Installed.
To set a Supervisor Password:
1.
Select the Change Supervisor Password item and press <Enter>.
2.
In the password box, key in a password containing up to six letters or numbers, or
both, then press <Enter>.
3.
Confirm the password when prompted.
ASUS AT5IONT-I Series
2-13
The message Password Installed appears after you successfully set your password.
To change the supervisor password, follow the same steps in setting a supervisor password.
To clear the supervisor password, select the Change Supervisor Password then press
<Enter> twice. The message Password uninstalled appears.
If you forget your BIOS password, you can clear it by erasing the CMOS Real Time Clock
(RTC) RAM. See section 1.6 Jumpers for information on how to erase the RTC RAM.
After you have set a supervisor password, the other items appear to allow you to change
other security settings.
User Access Level [Full Access]
This item allows you to select the access restriction to the Setup items.
Configuration options: [No Access] [View Only] [Limited] [Full Access]
[No Access] - prevents user access to the Setup utility.
[View Only] - allows access but does not allow change to any field.
[Limited] - allows changes only to selected fields, such as Date and Time.
[Full Access] - allows viewing and changing all the fields in the Setup utility.
Change User Password
Select this item to set or change the user password. The User Password item on top of the
screen shows the default Not Installed. After you set a password, this item shows Installed.
To set a User Password:
1.
Select the Change User Password item and press <Enter>.
2.
In the password box, key in a password containing up to six letters or numbers, or
both, then press <Enter>.
3.
Confirm the password when prompted.
The message Password Installed appears after you set your password successfully.
To change the user password, follow the same steps in setting a user password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
When set to [Setup], BIOS checks for user password when accessing the Setup utility. When
set to [Always], BIOS checks for user password both when accessing Setup and booting the
system. Configuration options: [Setup] [Always]
2-14
Chapter 2: BIOS information
2.7
Tools menu
The Tools menu items allow you to configure options for special functions. Select an item
then press <Enter> to display the sub-menu.
Main
Advanced
Power
AT5IONT-I DELUXE BIOS Setup
Boot
Tools
Exit
ASUS EZ Flash 2
Express Gate
Enter OS Timer
Reset User Data
[Auto]
[10 Seconds]
[No]
AI NET2
2.7.1
ASUS EZ Flash 2
2.7.2
Express Gate [Auto]
Version 0214
Press ENTER to run the
utility to select and
update BIOS.
This utility supports
1.FAT 12/16/32(r/w)
2.NTFS(read only)
3.CD-DISC(read only)
Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to
confirm your choice. See section 2.1.2 ASUS EZ Flash 2 for details.
Allows you to enable or disable the ASUS Express Gate feature. ASUS Express Gate is
a unique instant-on environment that provides quick access to the Internet and Skype.
Configuration options: [Enabled] [Disabled] [Auto]
Enter OS Timer [10 Seconds]
Sets countdown duration that the system waits at the Express Gate’s first screen
before starting Windows or other installed OS. Choose [Prompt User] to stay at the
first screen of Express Gate for user action. Configuration options: [Prompt User]
[1 second] [3 seconds] [5 seconds] [10 seconds] [15 seconds] [20 seconds]
[30 seconds]
Reset User Data [No]
Allows you to clear Express Gate’s user data. Configuration options: [No] [Reset]
When setting this item to [Reset], ensure to save the setting to the BIOS so that the
user data will be cleared the next time you enter the Express Gate. User data includes
the Express Gate’s settings as well as any personal information stored by the web
browser (bookmarks, cookies, browsing history, etc.). This is useful in the rare case
where corrupt settings prevent the Express Gate environment from launching properly.
The first time wizard will run again when you enter the Express Gate environment after
clearing its settings.
2.7.3
AI NET 2
Check Realtek LAN cable [Disabled]
Enables or disables checking of the Realtek LAN cable during the Power-On Self‑Test
(POST). Configuration options: [Disabled] [Enabled]
ASUS AT5IONT-I Series
2-15
2.8
Exit menu
The Exit menu items allow you to load the optimal or failsafe default values for the BIOS
items, and save or discard your changes to the BIOS items.
Main
Advanced
AT5IONT-I DELUXE BIOS Setup
Power
Boot
Tools
Exit
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults
Version 0214
Exitsystem
systemsetup
setup
Exit
aftersaving
savingthe
the
after
changes.
changes.
F10key
keycan
canbe
beused
used
F10
forthis
thisoperation.
operation.
for
Select Screen
Select Screen
Itemfrom this
Pressing <Esc> does not immediately exit this menu. Select+-one ofSelect
the options
Select
Item
Change
Option
EnterGeneral
Go to Sub-screen
menu or <F10> from the legend bar to exit.
F1
Help
Exit & Save Changes
F1
General
Help
F10
Save
and Exit
F10 Exit
Save and Exit
ESC
ESC
Exit
Once you are finished making your selections, choose this option from the Exit menu to
ensure the values you selected are saved to the CMOS RAM. An onboard backup battery
sustains the CMOS RAM so it stays on even when the PC is turned off. When you select this
option, a confirmation window appears. Select OK to save changes and exit.
Exit & Discard Changes
Select this option only if you do not want to save the changes that you made to the Setup
program. If you made changes to fields other than System Date, System Time, and
Password, the BIOS asks for a confirmation before exiting.
Discard Changes
This option allows you to discard the selections you made and restore the previously saved
values. After selecting this option, a confirmation appears. Select OK to discard any changes
and load the previously saved values.
Load Setup Defaults
This option allows you to load the default values for each of the parameters on the Setup
menus. When you select this option or if you press <F5>, a confirmation window appears.
Select OK to load default values. Select Exit & Save Changes or make other changes
before saving the values to the non-volatile RAM.
2-16
Chapter 2: BIOS information
ASUS contact information
ASUSTeK COMPUTER INC.
Address
Telephone Fax E-mail
Web site
Technical Support
Telephone Online support
15 Li-Te Road, Peitou, Taipei, Taiwan 11259
+886-2-2894-3447
+886-2-2890-7798
info@asus.com.tw
www.asus.com.tw
+86-21-38429911
support.asus.com
ASUS COMPUTER INTERNATIONAL (America)
Address
Telephone Fax
Web site
Technical Support
Telephone Support fax
Online support
800 Corporate Way, Fremont, CA 94539, USA
+1-510-739-3777
+1-510-608-4555
usa.asus.com
+1-812-282-2787
+1-812-284-0883
support.asus.com
ASUS COMPUTER GmbH (Germany and Austria)
Address
Fax
Web site
Online contact
Technical Support
Telephone (Component)
Telephone (System/Notebook/Eee/LCD)
Support Fax
Online support
Harkort Str. 21-23, D-40880 Ratingen, Germany
+49-2102-959911
www.asus.de
www.asus.de/sales
+49-1805-010923*
+49-1805-010920*
+49-2102-9599-11
support.asus.com
* EUR 0.14/minute from a German fixed landline; EUR 0.42/minute from a mobile phone.
(510)739-3777/(510)608-4555
800 Corporate Way, Fremont, CA 94539.
Asus Computer International
Signature :
Date :
Representative Person’s Name :
Jun. 09, 2010
Steve Chang / President
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Supplementary Information:
FCC Part 15, Subpart E, Intentional Radiators
FCC Part 15, Subpart B, Unintentional Radiators
FCC Part 15, Subpart C, Intentional Radiators
Model Number : AT5IONT-I
Conforms to the following specifications:
Product Name : Motherboard
hereby declares that the product
Phone/Fax No:
Address:
Responsible Party Name:
Per FCC Part 2 Section 2. 1077(a)
DECLARATION OF CONFORMITY
Manufacturer:
HARKORT STR. 21-23, 40880 RATINGEN
GERMANY
Address, City:
Country:
EN 62301:2005
Declaration Date: Jun. 09, 2010
Year to begin affixing CE marking:2010
CE marking
EN 62301:2005
Regulation (EC) No. 642/2009
Signature : __________
Position : CEO
Name :
Jerry Shen
(EC conformity marking)
EN 62301:2005
Regulation (EC) No. 278/2009
EN 60950-1:2006+A11:2009
Regulation (EC) No. 1275/2008
2009/125/EC-ErP Directive
EN60065:2002+A1:2006
EN 60950-1:2006
EN 301 489-1 V1.8.1(2008-04)
EN 301 489-3 V1.4.1(2002-08)
EN 301 489-4 V1.3.1(2002-08)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V1.3.2(2008-04)
EN 301 489-24 V1.4.1(2007-09)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.3.1(2006-05)
EN 55024:1998+A1:2001+A2:2003
EN 61000-3-3:2008
EN 55020:2007
EN 60950-1:2001+A11:2004
2006/95/EC-LVD Directive
EN 300 328 V1.7.1(2006-05)
EN 300 440-1 V1.4.1(2008-05)
EN 300 440-2 V1.2.1(2008-03)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V3.2.1(2007-05)
EN 301 908-2 V3.2.1(2007-05)
EN 301 893 V1.4.1(2005-03)
EN 50360:2001
EN 50371:2002
EN 62311:2008
EN 50385:2002
1999/5/EC-R &TTE Directive
EN 55022:2006+A1:2007
EN 61000-3-2:2006
EN 55013:2001+A1:2003+A2:2006
Motherboard
AT5IONT-I
Model name :
conform with the essential requirements of the following directives:
2004/108/EC-EMC Directive
Product name :
declare the following apparatus:
TAIWAN
ASUS COMPUTER GmbH
Authorized representative in Europe:
No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C.
Country:
Address, City:
ASUSTek COMPUTER INC.
EC Declaration of Conformity
We, the undersigned,
Download PDF