NOVA XPAK 604X Strobe Power Supply Installation Sheet

The NOVA XPAK604X is a powerful strobe power supply that can be used to activate up to 4 strobe heads at a time. It provides a variety of flash patterns and adjustable power settings, making it suitable for a wide range of applications. You can activate heads 1 and 2, or 3 and 4 depending on your need. You can also choose between high and low power modes.

PDF Download
Document
NOVA XPAK604X Installation Sheet | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • 4 Strobe Head Outlets
  • 15 Flash Patterns
  • High/Low Power Mode
  • Adjustable Power Output
  • Easy Installation
  • Diagnostic Indicators
  • EZ Panel Connector

Frequently asked questions

To change the flash pattern, momentarily connect the YELLOW wire to +12/24V. Each connection will advance to the next pattern in the list. Holding the YELLOW wire to +12/24V for 3 seconds will reset to pattern #1. You can also connect the YELLOW wire to a momentary push-button located in the passenger compartment.

The GREEN wire activates Heads 1 & 2 when connected to +12/24V. The BLUE wire activates Heads 3 & 4 when connected to +12/24V. You can activate any combination of the heads by connecting the corresponding wires to +12/24V.

Connect the RED wire to BATTERY + through a 15A fuse (customer supplied) located at the battery. Connect the BLACK wire to battery negative (-) or directly to vehicle chassis. Use the correct size wire for power connections. The length of the wires determines the size needed.
Preparing document for printing…
0%