Whirlpool | ED22HP | Specifications | Whirlpool ED22HP Specifications

UseAhdCare
A Note To You
2
kizE2Ed~
3
Parts And Features
4
Before Using Your
Refrigerator
5
Using Your
Refrigerator
7
pa$royr
21
Food Storage Guide 24
If You Need
.
PEz
26
Warranty
28
1-800-253-1301
Cell us with questions
or comments.
NO-FROST REFRIGERATOR-FREEZER
MODELS
ED25PW
ED25PB
ED22PW
ED22PB
ED22HP
A Note To You
Thank
you for buying
a Whirlpool’
appliance.
You have purchased a quality, worM&~ss home appliance. Years of engineering experience
went into its manufacturing. To ensure that you enjoy many years of trouble-free operation,
we developed this Use and Care Guide. It is full of valuable information on how to operate
and maintain your appliance properly and safely. Please read it carefully. Also, please complete and mail the Ownership Registration Card provided with your appliance. This will help
us notify you about any new information on your appliance.
Your
safety
is important
to us.
This guide contains safety symbols and statements. Please pay special attention to these
symbols and follow any instructions given. Here is a brief explanation of the use of each
symbol.
This symbol will help alert you to such
dangers as personal injury, bums, fire
1 and electrical shock.
This symbol will help you avoid actions
1
Our Consumer
Assistance
Center
is toll-free,
24 hours a day.
IEE”
number,
1
1-800-253-1301,
If you ever have a question concerning your appliance’s operation, or if you need service, first
see “If You Need Assistance Or Service” on page 26. If you need further help, feel free to call
our Consumer Assistance Center. When calling, you will need to know your appliance’s
complete model number and serial number. You can find this information on the model and
serial number label (see diagram on page 4). For your convenience, we have included a
handy place below for you to record these numbers, the purchase date from the sales slip
and your dealer’s name and telephone number. Keep this book and the sales slip together in
a safe place for future reference.
Model Number
Dealer Namer
Serial Number
Dealer Phone
Purchase Date
2
.---
Important
.
7---
Safety
Instructions
To reduce the risk of fire, electrical shock, or injury when
using your refrigerator, follow these basic precautions:
*Read all instructions before using the
refrigerator.
@Child entrapment and suffocation are
not problems of the past. Junked or
abandoned refrigerators are still dangerous . . . even if they will “just sit in the
garage a few days.”
If you are getting rid of your 0M refrigerator, do it safely.
l Never allow children to operate, play
with, or crawl inside the refrigerator.
Never clean refrigerator parts with
flammable fluids. The fumes can create a
fire hazard or explosion.
l FOR YOUR SAFETY l
DO NOT STORE OR USE GASOLINE OR
OTHER FLAMMABLE VAPORS AND
LIQUIDS IN THE VICINITY OF THIS OR
ANY OTHER APPLIANCE. THE FUMES
CAN CREATE A FIRE HAZARD OR
EXPLOSION.
l
- SAVE THESE INSTRUCTIONS -
Help
us help
you
Please:
l Install and level the refrigerator
on a floor
that will hold the weight and in an area
suitable for its size and use.
l Do not install the refrigerator
near an oven,
radiator or other heat source.
l Do not use the refrigerator
in an area
where the room temperature will fall below
55°F (13°C).
l Keep the refrigerator
out of the weather.
l Connect the refrigerator
only to the proper
kind of outlet, with the correct electrical
supply and grounding.
l Do not load the refrigerator
with food
before it has time to get properly cold.
l Use the refrigerator
only for the uses
described in this manual.
l Properly maintain the refrigerator.
l Be sure the refrigerator
is not used by
anyone unable to operate it properly.
3
Parts And Features
This section contains captioned illustrations. Use them to become familiar with where all parts
and features are located and what they look like. The model you have purchased may have
all or some of the parts and features shown and they may not match the illustration exactly.
This manual covers several models.
Control
Automatic
maker -
panel
Light
ice
Model and
serial number
label
(on side wail)
Ice
bin
\
Light
(below ice bin)’
Dtiiity
compartment
Freezer shelves
.
Snack bin
Crisper
cover-
Meat drawer
temperature
\
Removable
sheif front
1
Egg bin
\
Adjustable
door bins
Adjustable
glass sheives
Freezer basket
.
\
Tail-bottle
retainer
. Crisper
1
Leveling rollers
(behind base
grille)
.
light
Crisper
. Meat drawer
Base grille
Model ED22PW shown
Control
panel
I
1
Freezer control
Refrigerator
control
I--
Before Using Your
Refrigerator
In This
Section
Page
Cleaning it . .. .... ................. ............... .... 5
Page
Installing it properly ............. ........... ... 6
Plugging it in ....................................... 5
Leveling it .,.......................................... 6
It is important to prepare your refrigerator for use. This section tells you how to clean it,
connect it to a power source, install it and level it.
Cleaning
Removing
it
packaging
materials
Remove tape and any inside labels (except
the model and serial number label) before
using the refrigerator.
NOTE: Do not remove any permanent
instruction labels inside your refrigerator. Do
not remove the Tech Sheet fastened under
the refrigerator at the front.
To remove any remaining glue:
Cleaning
Rub briskly with thumb to make a ball, then
remove.
OR
l Soak area with liquid hand-dishwashing
detergent before removing glue as
described above. Do not use sharp
instruments, rubbing alcohol, flammable
fluids or abrasive cleaners. These can
damage the material. See “Important
Safety Instructions” on page 3.
After removing all packaging materials,
clean your refrigerator before using it, if
necessary. See cleaning instructions on
pages 21-22.
l
Plugging
it before
use
it in
Recommended Grounding
Method
A 115 Volt, 60 Hz., AC only 15 or 20 ampere
fused and properly grounded electrical
supply is required. It is recommended that a
separate circuit serving only this appliance
be provided. Use a receptacle which cannot
be turned off with a switch or pull chain. Do
not use an extension cord.
See Electriil
Requirements and Grounding Instructions Sheet in your Literature
Package.
a-prong grounding
type wall receptacle
Refrigerator
power cord
grounding
PM
5
Installing
it properly
1. Allow % inch (1.25 cm) space on each
side and at the top of the refrigerator for
ease of installation.
2. If the refrigerator is to be against a wall,
you might want to leave extra space on
the hinge side closest to the wall so the
door can be opened wider.
3. The refrigerator can be flush against the
wall.
4. Make sure ice maker water supply has
been connected. Refer to Installation
Instructions.
Leveling
it
Your refrigerator has 2 front leveling
screws-one on the right and one on the left.
To adjust one or both of these, follow the
directions below.
1. Remove base grille. (See page 18.)
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterckxkwise.
4. Check with level.
5. Replace base grille. (See page 18.)
6
-
Using Your Refrigerator
In This Section
Page
Setting the controls ............................ 7
Page
Removing the freezer shelves ........ .13
Changing the control settings ........... 8
Removing the freezer basket.. ........ .13
Removing the snapoff door trim.. .... .
Removing the freezer door
shelves .............................................. 13
Adjusting the door bins .................... .9
Adjusting the door bin glides ........... .9
Using the ice and water
dispensers ......................................... 14
Removing the tall-bottle retainer ....lO
Using the automatic ice maker.. ..... .15
Adjusting the refrigerator shelves ..lO
Using the egg bin ............................. 10
Removing the ice maker
storage bin ........................................ 18
Removing the crisper and crisper
cover .................................................. 11
Solving common ice maker/
dispenser problems ........................ .17
Removing the meat drawer
and cover ........................................... 11
Removing the base grille ................ .18
Changing the light bulbs ................ .18
Adjusting the crisper humidity
control ............................................... 12
Understanding the sounds you
may hear ............................................ 20
Adjusting the meat drawer
temperature ....................................... 12
Saving energy ................................... 20
Removing the snack bin ................. .12
To obtain the best possible results from your refrigerator, it is important that you operate it
properly. This section tells you how to set the controls, remove and adjust some of the features in your refrigerator, and how to save energy.
Setting
the controls
Controls for the refrigerator and freezer are in
the refrigerator. When you plug in the refrigerator
for the first time:
1. Set the Refrigerator Control to 3.
Refrigerator Control adjustments
1 (warmest) to 5 (coldest).
2.
range from
Set the Freezer Control to B.
Freezer Control adjustments
A (warmest) to C (coldest).
range from
3. Give the refrigerator time to cool down
completely before adding food. This may
take several hours.
The settings indicated above should be
correct for normal, household refrigerator
usage. The controls are set correctly
when milk or juice is as cold as you like
and when ice cream is firm. lf you need to
adjust these settings, see “Changing the
control settings” below.
Changing
the control
If you need to adjust temperatures in
refrigerator or freezer, use the settings
listed in the chart below as a guide. If
you have questions, call our Consumer
Assistance Center number, 1-800-253-l
CONDITION:
Refrigerator
section
too warm
Freezer
section
too warm
Ice not
made fast
enough
Both
sections
too warm
settings
l
l
l
Adjust the Refrigerator Control first.
Wait at least 24 hours between adjustments.
Then adjust the Freezer Control if needed.
301.
REASON:
l
l
l
l
l
l
I
Refrigerator
section
too cold
NOTE: The Automatic Exteriir Moisture
control continuousty guards against moisture
build-up on the outside of your refrigerator
cabinet. This control does not have to be set
or adjusted.
l
l
l
l
l
l
RECOMMENDED
CONTROL SElTlNGS:
Door opened often
Large amount of food added
Room temoerature too warm
Refrigerator
Freezer
4
A
Door opened often
Large amount of food added
Very cokf room temperature
(can’t cycle often enough)
Refrigerator
Freezer
3
C
Controls not set correctly
for your conditions
Refrigerator
Freezer
2
El
Heavy ice usage
Very coM room temperature
(can’t cycle often enough)
Refrigerator
Freezer
3
C
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator
Freezer
4
B
I
I
Removing
(on some
the snap-off
door trim
models)
To remove the trim piece:
1. Remove all items from the shelf.
2. Pull out on the inside tab at each end of
the trim piece.
3. Pull trim piece straight out.
To replace the trim piece:
1. Line up ends of the trim piece with the
button on the door liner wall.
2. Push trim piece straight back until it
snaps securely into place.
3. Replace items on the shelf.
Adjusting
the door bins
To remove door bins:
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push down until it stops.
Adjusting
the door bin glides
Use the bin glides to secure odd-shaped
items or to separate other items.
1. Grasp glide.
2. Slide glide along bin.
9
.-
-
Removing
the tall-bottle
retainer
The tall-bottle retainer fits onto any door bin
in your refrigerator. The retainer helps to
hold tall-bottles in place when opening and
closing the refrigerator door.
To remove tall-bottle retainer:
1. Grasp center of retainer.
2. Pull up and off of bin.
To replace tall-bottle retainer:
1. Position retainer above desired door bin.
2. Gently push retainer down onto bin.
3. Make sure both side notches sit firmly
against bin.
Adjusting
the refrigerator
Notch
shelves
Adjust shelves to match the way you use your
refrigerator. Glass shelves are strong enough to
hold bottles, milk and other heavy food items.
To remove the shelves:
1. Remove items from the shelf.
2. Tilt shelf up at front.
3. Lii shelf up at back.
4. Pull shelf straight out.
To replace the shelves:
1. Guide the rear shelf hooks into the slots in
the shelf supports on the back liner wall.
2. Tilt front of shelf up until hooks drop into slots.
3. Lower front of shelf to a level position.
Using
when
the egg bin
The egg bin has two pieces -the lid and the
bin. Use the egg bin to hold one, two or three
dozen eggs.
To hold one dozen eggs:
Place a dozen eggs (in or out of carton) in
the bin and cover with the lid.
To hold two dozen eggs:
Place two dozen eggs loose in the bin and
cover with the lid.
To hold three dozen eggs:
Place two dozen eggs loose in the bin. Invert
the lid and place it on the bin. Put a dozen
eggs, in their carton, on top of the lid.
10
Be careful
handling glass items.
Lid
Bin
Removing
the crisper
To remove the crisper:
1. Slide the crisper straight out to the stop.
and crisper
cover
Pull out to the
stop, lift the front
and pull again.
I
2. Lift the front slightly.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Hold cover firmly with both hands and lift
front of cover off supports.
2. Lift cover out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on
Lift the cover
front, then
the back
walls of refrigerator.
2. Lower front into place.
Removing
the meat drawer
and cover
To remove the meat drawer:
1. Slide the meat drawer straight out to the
stop.
2. Lift the front slightly.
3. Slide out the rest of the way.
4. Replace in reverse order.
Pull out to the stop, lift
the front and pull again.
To remove the cover:
1. Remove meat drawer and crisper.
2. Lift front of cover off supports.
3. Lift cover out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on
walls of refrigerator.
2. Lower front into place.
3. Replace meat drawer and crisper.
11
Adjusting
the crisper
humidity
control
You can control the amount of humidity in
the moisture-sealed crisper.
l Adjust the control to any setting
between
LOW and HIGH.
l LOW (open) lets moist air out of the crisper
for best storage of fruits and vegetables
with skins.
l HIGH (closed)
keeps moist air in the
crisper for best storage of fresh, leafy
vegetables.
Adjusting
the meat drawer
Cold air flows against the meat drawer
through an opening between the freezer and
the refrigerator. This helps keep the meat
drawer colder than the rest of the refrfgerator for better storage of meats.
Slide the control to let more or less coM air
through.
Removing
the snack
temperature
Use control to
adjust meat drawer
temperature.
bin
To remove the snack bin:
1. Slide snack bin straight out to the stop
with an even, constant motion.
2. Lift the front.
3. Slide bin out the rest of the way.
4. Replace in reverse order.
Pull out to the
atop, lift the front
and pull again.
12
Removing
the freezer
shelves
To remove the shelf:
1. Lii right side of shelf off supports.
2. Slide shelf out of shelf support holes.
3. Replace in reverse order.
Removing
the freezer
basket
To remove the basket:
Pull out to the
stop, lift the
front and pull
again.
1. Slide basket out to the stop.
2. Lift the front to clear the stop.
3. Slide basket out the rest of the way.
To replace the basket:
1. Place basket on the slides.
2. Make sure the wire stops clear the front
of the slides.
3. Slide basket in all the way.
Removing
(on some
the freezer
door shelves
models)
Remove the freezer door shelves for easier
cleaning.
To remove the door shelves:
1. Grasp shelf at both ends.
2. Lift shelf up and pull it out.
To replace the door shelves:
1. Insert door shelf hooks into guides on
both edges of door liner.
2. Push shelf down to lock into place.
13
Using
the ice and water
Personal injury Hazard
Tumbling ice and pressure can break a
fragile glass. Use a sturdy glass when
dispensing ice or water.
Failure to do so could result in personal
injury or breakage.
The ice dispenser
Ice dispenses from the ice maker storage bin in
the freezer. When you press the dispenser bar,
a trapdoor opens in a chute between the
dispenser and the ice bin. Ice moves from the
bin and falls through the chute. When you
release the dispenser bar, a buzzing sound
may be heard for a few seconds as the trapdoor closes. The dispenser system will not
operate when the freezer door is open.
To dispense ice:
1. Press a sturdy glass against the ice dispenser bar. HoM glass close to dispenser
opening so ice does not fall outside of glass.
2. Remove the glass to stop dispensing.
NOTE: The first few batches of ice may have
an off-flavor from new plumbing and parts.
Throw the ice away. Also, take large amounts
of ice from the ice bin, not through the dispenser.
The water
dispenser
Chilled water comes from a tank behind the
meat drawer. It hokfs approximately 1 l/2 quarts
(1.5 L).
When the refrigerator is first hooked up,
press the water dispenser bar with a glass or
jar until you draw and discard 2 or 3 quarts (1.9
to 2.8 L). The water you draw and discard
rinses the tank and pipes.
Allow several hours to chill a new tankful.
NOTE: The small tray beneath the dispenser is
designed to evaporate small spills. There is no
drain in this tray. Do not pour water into it.
14
dispensers
To dispense water:
1. Press a sturdy glass against the water
dispenser bar.
2. Remove the glass to stop dispensing.
NOTE: Dispense enough water every week
to maintain a fresh supply.
Using
the automatic
ice maker
Here are a few things you will want to know
about your automatic ice maker:
l The ON/OFF lever is a wire signal arm.
DOWN to make ice automatically.
UP to shut off the ice maker.
NOTE: Do not turn ice maker on until it is
connected to the water supply. instructions
UP to
stop ice
maker.
t
DOWN to
start ice
maker.
for ice maker water suppty hook up are
attached to the back of the refrigerator
cabinet.
l
l
l
l
It is normal for ice crescents to be attached
by a corner. They break apart easily.
The ice maker will not operate until the
freezer is cold enough to make ice. This can
take overnight.
If ice is not being made fast enough and
more ice is needed, turn the Refrigerator
Control toward a higher number. Wait a day
and, if necessary, turn the Freezer Control
toward C.
Good water quality is important for good ice
quality. Try to avoid connecting the ice
maker to a softened water supply. Water
softener chemicals (such as salt from a
malfunctioning softener) can damage the ice
maker mold and lead to poor ice quality. If a
softened water suppfy cannot be avoided,
make sure the water softener is operating
properly and well maintained.
15
Removing
the ice maker
Remove, empty and clean the
l the ice dispenser
has not, or
used for a week or more.
l a power failure
causes ice in
melt and freeze together.
l the ice dispenser
is not used
storage bin if:
will not, be
the bin to
regularly.
To remove ice bin:
1. Pull the coveting panel out from the
bottom and slide it to the rear.
2. Lift the signal arm so it clicks into the OFF
(up) position. Ice can still be dispensed,
but no more can be made.
3. Lift the front of the storage bin and pull it
Out.
4. Empty the ice bin. Use hot or warm water
to melt the ice if necessary. Never use
anything sharp to break up ice in the
bin. This can damage the bin and dispenser mechanism.
5. Wash with mild detergent. Rinse well. Do
not use harsh or abrasive cleaners or
solvents.
6. When replacing the bin, make sure it is
pushed in all the way. Then push the
signal arm down to the ON position to
restart ice production.
16
storage
bin
Solving common
problems
PROBLEM
ice dispenser
won’t work
CAUSE
l
l
l
l
ice dispenser
stops working
ice maker/dispenser
l
Freezer door open
Ice bin not properly
installed
Wrong ice in bin
Dispenser not used for
extended periids,
causing ice cubes to
melt together
Ice dispenser bar held
in too long
SOLUTIONS
l
Close the freezer door.
Make sure bin is pushed in all the way.
l
Use only crescents from ice maker.
l
Shake the bin occasionally to keep cubes
separated and to increase storage room.
Dump old ice and make a new supply.
l
l
l
Off-taste or
l
odor in ice
l
Ice attracts airborne
odors; old ice
Water quality
l
Foods not properly
wrapped
Ice bin and freezer may
need cleaning
Plumbing to ice maker
l
New ice maker
l
l
l
l
l
l
l
l
Wait about 3 minutes for the dispenser
motor to reset.
Large amounts of ice should be taken
from the bin, not through the dispenser.
Dump old ice and make a new supply.
Store excess ice in covered container.
Water containing minerals (such as sulfur)
may require a filter to remove.
Wrap properly. See pages 24 and 25.
Clean freezer and ice bin. See cleaning
chart on pages 21 and 22.
Follow Installation Instructions for proper
ice maker water supply hook up. (See
back of refrigerator cabinet.)
The first few loads of ice from a new ice
maker may have an off-taste. Dump ice
and make a new supply.
17
Removing
the base grille
To remove the grille:
1. Open both doors.
I
2. Pull base grille forward to release the
support tabs from the metal clips.
3. Do not remove Tech Sheet fastened
behind the grille.
To replace the grille:
1. Line up grille support tabs with metal
clips.
2. Push firmly to snap into place.
3. Close the doors.
See cleaning instructions for defrost pan and
condenser coils on page 22.
Changing
the light
bulbs
I
Electrical Shock Hazard
Before removing a light bulb, either
unplug the refrigerator or disconnect
the electricity leading to it at the main
power supply.
Failure to do so could resuft in personal injury.
L
To change refrigerator light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Console to
remove bulb.
3. Replace bulb with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
18
Condenser
coils
To change crisper light:
1. Disconnect refrigerator from power supply.
2. Pull top of light shield forward until it snaps
free.
3. Lower light shield to clear bottom supports.
4. Pull light shield straight out to remove.
6. Replace bulb with a 40-watt appliance
bulb.
6. Replace light shield in reverse order.
7. Reconnect refrigerator to power supply.
risper
light
To change light below ice bin:
1. Disconnect refrigerator from power supply.
2. Push in sides of light shield until it snaps
free.
3. Replace bulb with a 40-watt appliance bulb.
4. Replace light shield.
5. Reconnect refrigerator to power supply.
Light
below
ice bin
To change upper freezer light
(on some models):
1. Disconnect refrigerator from power
\
SUPPly.
2. Lift top of light shield up and pull shield
Out.
3. Replace with a 40-watt appliance bulb.
4. Place shield over bulb and snap shield
into place.
5. Reconnect refrigerator to power supply.
I
Upper f&ezer
light
To change dispenser area light:
1. Disconnect refrigerator from power supply.
2. Reach through dispenser area to
remove bulb.
3. Replace with a heavy-duty 1O-watt bulb,
which can be purchased from your
Whirlpool dealer.
4. Reconnect refrigerator to power supply.
NOTE: Not all commercial appliance bulbs
will fit your refrigerator. Be sure to replace a
bulb with one of the same size and shape.
19
-
Understanding
the sounds
Your new refrigerator may make sounds that
your old one didn’t. Because the sounds are
new to you, you might be concerned about
them. Don’t be. Most of the new sounds are
normal. Hard surfaces like the floor, walls
and cabinets can make the sounds seem
louder.
The following describes the kinds of
sounds that might be new to you, and what
may be making them.
Slight
hum,
soft
hiss
You may hear the refrigerator’s
and moving air.
Clicking
or snapping
fan motor
Saving
sounds
When the refrigerator stops running, you
may hear gurgling in the tubing for a few
minutes after it stops. You may also hear
defrost water running into the defrost water
pan.
Ice maker
sounds
trickling water
l thud (clatter of ice)
You may hear buzzing (from the water
valve), triikling water and the clatter of ice
dumped into the bin.
l
Running
sounds
Your refrigerator has a high-efficiency
compressor and motor. It will run longer than
older designs. It may even seem to run most
of the time.
energy
You can help your refrigerator use less
electricity.
l Check door gaskets for a tight seal. Level
the cabinet to be sure of a good seal.
l Clean the condenser
coils regularly.
l Open the door as few times as possible.
Think about what you need before you
open the door. Get everything out at one
time. Keep food organized so you won’t
have to search for what you want. Close
door as soon as food is removed.
20
Water
sounds
The thermostat makes a definite click when
the refrigerator stops running. It also makes
a sound when the refrigerator starts. The
defrost timer will click when the defrost cycle
starts.
you may hear
l
l
l
Go ahead and fill up the refrigerator, but
don’t overcrowd it so air movement is
blocked.
It is a waste of electricity to set the refrigerator and freezer to temperatures cokfer
than they need to be. If ice cream is firm in
the freezer and drinks are as cold as your
family likes them, that’s cold enough.
Make sure your refrigerator is not next to a
heat source such as a range, water heater,
furnace, radiator or in direct sunlight.
Caring
I
In This
For Your Refrigerator
Section
Cleaning your refrigerator ............... 21
Power interruptions
Page
..... ............... ...... 23
Vacation and moving care ............... 22
Your refrigerator is built to give you many years of dependable service. However, there are a
few things you can do to help extend its product life. This section tells you how to clean your
refrigerator and what to do when going on vacation, moving or during a power outage.
Cleaning
your
refrigerator
Both the refrigerator and freezer sections
defrost automatically. However, clean both
about once a month to prevent odors from
building up. Wipe up spills right away.
To clean your refrigerator, turn the Refrigerator Control to OFF, unplug it, take out all
removable parts and clean the refrigerator
according to the following directions.
PART
WHAT TO USE
Removable parts
Sponge or cloth with mild
detergent and warm
water
(shelves, crisper,
etc.)
Outside
Sponge, cloth or paper
towel with mild detergent,
warm water and an
appliance wax (or good
auto paste wax)
Personal injury Hazard
Refrigeration system tubes are located
near the defrost pan and can become
hot. Remove and install defrost pan
carefully.
Failure to do so could result in personal
injury.
HOW TO CLEAN
l
l
l
l
Hand wash, rinse and dry thoroughly.
Wash outside of cabinet. Do not
use abrasive or harsh cleaners.
Rinse and dry thoroughly.
Wax painted metal surfaces at least
twice a year. Apply wax with a
clean, soft cloth. Waxing painted
metal surfaces provides rust
protection. Do not wax plastic
parts.
inside wails
(allow freezer to
warm up so cloth
won’t stick)
Sponge, soft cloth or
paper towel with baking
soda or mild detergent
and warm water
l
l
Wash with mixture of warm water
and:
- mikl detergent, or
- baking soda (2 tablespoons [26 g]
to 1 quart [.95 L] of water).
Rinse and dry thoroughly.
on next page
21
-
PART
WHAT TO USE
Door liners and
gaskets
Sponge, soft cloth
or paper towel with
miM detergent and
warm water
Piasttic parts
Soft, clean sponge
or soft, clean cloth
with mild detergent
and warm water
(covers and
panels)
Defrost pan
Sponge or cloth
with mild detergent
and warm water
HOW TO CLEAN
Wash, rinse and dry thoroughly.
l
DO NOT USE cleaning waxes, concentrated detergents, bleaches or cleaners
containing petroleum on plastic parts.
l
l
l
l
l
l
l
Condenser coils
Vacuum cleaner
with extended
narrow
attachment
l
l
l
Floor under
refrigerator
Floor cleaners
l
l
l
l
Vacation
Short
and moving
vacations
No need to shut off the refrigerator if you will
be away for less than four weeks.
1. Use up any perishables.
2. Freeze other items.
3. Raise signal arm to OFF (up) position.
4. Shut off water supply to ice maker.
5. Empty the ice bin.
22
Wash, rinse and dry thoroughly.
DO NOT USE paper towels, window
sprays, scouring cleansers or fiammabie fiuMs. These can scratch or
damage material. See “important Safety
instructions” on page 3.
Remove base grille. (See page 18.)
To remove defrost pan, lift pan over wire
brace (remove tape; if any).
Wash, rinse and dry thoroughly.
Replace with notched corner to the rear.
Push it in all the way.
Make sure defrost pan drain tube is
pointing into pan.
Replace base grille.
Remove base grille.
Vacuum coils when dusty or dirty. Coils
may need to be cleaned as often as
every other month.
Replace base grille.
Roll refrigerator out only as far as the
water supply line allows.
Clean floor.
Roll refrigerator back into place.
Check to see if the refrigerator is level.
care
Long
vacations
If you will be gone a month or more:
1. Remove all food from the refrigerator.
2. Turn off the water supply to the ice maker
at least one day ahead of time.
3. When the last load of ice drops, turn
off the ice maker. Make sure all ice is
dispensed out of the ice maker
mechanism.
4. Unplug the refrigerator.
5. Clean it, rinse well and dry.
6. Tape rubber or wood blocks to the tops of
both doors to prop them open far enough
for air to get in. This stops odor and mold
from building up.
Personal injury Hazard
Do not allow children to climb on, play
near or climb inside the refrigerator
when the doors are blocked open.
They may become injured or trapped.
Moving
When you are moving the refrigerator to a
new home:
1. Turn off the water supply to the ice
maker at least one day ahead of time.
2. Disconnect the water line.
3. After the last load of ice drops, lift the
signal arm to the OFF (up) position.
4. Remove all food from the refrigerator.
5. Pack all frozen food in dry ice.
6. Unplug the refrigerator.
7. Clean it thoroughly. Rinse well and dry.
6. Take out all removable parts, wrap them
well, and tape them together so they
don’t shift and rattle.
9. Screw in the leveling rollers.
10. Tape the doors shut and tape the power
supply cord to the cabinet.
When you get to your new home, put
everything back and refer to page 5. Also,
remember to reconnect the water supply
line.
To restart refrigerator, see “Using Your
Refrigerator” on page 7.
Power
interruptions
If electriiity goes off, call the power company. Ask how long power will be off.
1. If service will be interrupted 24 hours or
less, keep both doors closed. This
helps food stay frozen
2. If service will be interrupted longer than
24 hours:
(a) Remove all frozen food and store in a
frozen food locker.
OR
(b) Place 2 Ibs. (0.9 kg) of dry ice in
freezer for every cubic foot of freezer
space. This will keep food frozen for 2
to 4 days. Wear gloves to protect your
hands from dry ice burns.
OR
(c) If neither a food locker or dry ice is
available, use or can perishable food
at once.
3. A full freezer stays cold longer than a
partly filled one. A freezer full of meat
stays cold longer than a freezer full of
baked goods. If food contains ice crystals,
it may be safely refrozen, although the
quality and flavor may be affected. If the
condition of the food is poor, or if you feel
it is unsafe, dispose of it.
Questions
‘1
Call our Consumer Assistance Center
telephone number, 1-800-253-l 301.
23
Food Storage
Guide
There is a correct way to package and store refrigerated or frozen food. To keep food fresher,
longer, take the time to study these recommended steps.
Storing
fresh
food
Wrap or store food placed in the refrigerator
in airtight and moisture-proof material. This
prevents food odor and taste transfer
throughout the refrigerator. For dated
products, check code date to ensure
freshness.
Leafy
vegetables
Remove store wrapping and trim or tear off
bruised and discolored areas. Wash in cold
water and drain. Place in plastic bag or
plastic container and store in crisper.
Vegetables
with skins
(carrots,
peppers)
Cheese
Store in the original wrapping until you are
ready to use ft. Once opened, rewrap tightly
in plastic wrap or aluminum foil.
Leftovers
Cover leftovers with plastic wrap or aluminum foil. Plastic containers with tight lids can
also be used.
Meat
Store most meat in original wrapping as long
as it is airtight and moisture-proof. Rewrap if
necessary. See the following chart for
storage times.
Store in crisper, plastic bags or plastic
container.
TYPE
Fruit
Wash, let dry and store in refrigerator in
plastic bags or crisper. Do not wash or hull
berries until they are ready to use. Sort and
keep berries in their original container in a
crisper, or store in a loosely closed paper
bag on a refrigerator shelf.
Eggs
Store without washing in egg bin provided,
or in the original carton on an interior shelf.
APPROXIMATE TIME
(DAYS)
Chicken
1 to2
Ground beef
1 to2
Steaks and roasts
3 to 5
Cured meats
7to10
Bacon
5 to 7
Cold cuts
3 to 5
Variety meats
1 to2
Milk
*If storing meat longer than the times given,
follow the directions for freezing.
Wipe milk cartons. For best storage, place
milk on interior shelf.
NOTE: Use fresh fish and shellfish the Same
day as purchased.
Butter
or margarine
Keep opened butter in covered dish or
closed compartment. When storing an
extra supply, wrap in freezer packaging
and freeze.
24
Storing
frozen
food
The freezer section is designed for storage
of commercially frozen food and for freezing
food at home.
NOTE: For further information about preparing food for freezing or food storage times,
contact your local Cooperative Extension
Service or check a freezer guide or reliable
cookbook.
Packaging
The secret of successful freezing is in the
packaging. The way you close and seal the
package must not allow air or moisture in or
out. Packaging done in any other way could
cause food odor and taste transfer throughout the refrigerator and drying of frozen
food.
Freezing
Do not expect your freezer to quick-freeze
any large quantity of food. Put no more
unfrozen food into the freezer than will
freeze within 24 hours (no more than 2 to
3 pounds of food per cubic foot of freezer
space). Leave enough space for air to
circulate around packages. Be careful to
leave enough room at the front so the door
can close tightly.
Storage times will vary according to the
qualii of the food, the type of packaging or
wrap used (airtight and moisture-proof) and
the storage temperature, which should be
0°F (-17.8%).
Packaging recommended for use:
Rigid plastic containers with tight-fitting lids
Straight-sided canning/freezing jars
l Heavy-duty
aluminum foil
l Plastic-coated
paper
l Non-permeable
plastic wraps (made from
a Saran film)
Follow package or container instructions for
proper freezing methods.
l
l
Do not use:
Bread wrappers
Non-polyethylene
plastic containers
l Containers
without tight lids
l Waxed paper
l Waxed-coated
freezer wrap
l Thin, semi-permeable
wrap
The use of these wrappings could cause
food odor, taste transfer and drying of frozen
food.
l
l
25
If You Need Assistance
Service
Or
Performance problems often result from little things you can fix without tools. Please read the
chart below before calling for service on your apdiance.
1. Before
calling
for assistance
...
Listed in this chart are the most common problems consumers
Please read through this and see if it can solve vour
.
,problem.
PROBLEM
Your refrigerator
will not
operate
run into with their appliances.
CHECK THE FOLLOWING
Is the power supply cord firmly plugged into a live circuit with proper
voltage?
Has a household fuse or circuit breaker blown/tripped?
Is the Refrigerator Control set to the OFF position?
The lights do
not work
Is the power supply cord firmly plugged into a live circuit with proper
voltage?
Has a household fuse or circuit breaker blown/tripped?
Is a bulb burned out?
The ice maker
does not work
Is the freezer cokf enough to make ice? It could take overnight for
the freezer to reach the proper temperature.
Is the ON/OFF lever in the ON (down) position? (See page 15.)
Is the water valve turned on?
Does the water line have a clog or leak?
You hear unfamiliar sounds or a
rattling/jingling
noise
Is something on top of or behind the refrigerator?
Some new sounds are normal. See “Understanding
may heat” on page 20.
the sounds you
There is water in
the defrost pan
This is normal on hot, muggy days. Make sure the refrigerator
so the pan does not overflow.
The motor seems
to run too much
Are the condenser coils dirtv?
is level
Has the door been open often? Has a larae amount of food been
added at one time? The motor naturally r&s longer if these things
happen.
Is the room hot? If the room is too warm, the motor runs longer to
keep the unit cool.
26
2. If you need
assistance*...
Call Whirlpool Consumer Assistance
Center telephone number. Dial toll-free
from anywhere in the U.S.A.:
1-800-253-1301
and talk with one of our trained consultants.
The consultant can instruct you in how to
obtain satisfactory operation from your
appliance or, if service is necessary, recommend a qualified service company in your
area.
If you prefer, write to:
Mr. William Clark
Consumer Assistance Representative
Whirlpool Corporation
2000 N State Route 63
Benton Harbor, Ml 49022-2692
Please include a daytime phone number in
your correspondence.
4. If you need FSP
ment parts . . .
FSP is a registered trademark of Whirlpool
Corporation for quality parts. Look for this
symbol of quality whenever you need a
replacement part for your Whirlpoole
appliance. FSP replacement parts will fii
right and work right, because they are made
to the same exacting specifications used to
build every new Whirlpool appliance.
To locate FSP replacement parts in your
area, refer to Step 3 above or call the
Whirlpool Consumer Assistance Center
number in Step 2.
5. If you are not satisfied
how the problem
was
solved . . .
l
3. If you
need
service*...
Whirlpool has a nationwide network of
authorized Whirlpool@ service companies.
Whirlpool service technicians are trained to
fulfill the product warranty and provide afterwarranty service, anywhere in the United
States. To locate the authorized Whirlpool
service company in your area, call our
Consumer Assistance Center telephone
number (see Step 2) or look in your telephone directory Yellow Pages under:
‘APPIMNCE-HOUSEHOIDYAJOR, SERVICE L REPNR
- SM Whirlpool Applimces
or
Autlwrlmd
WhIrlpool Servke
(.ExBt7@x XYi! Smvk4 Co.)
replace-
l
l
with
Contact the Major Appliance Consumer
Action Panel (MACAP). MACAP is a group
of independent consumer experts that
voices consumer views at the highest
levels of the major appliance industry.
Contact MACAP only when the dealer,
authorized servicer and Whirlpool have
failed to resolve your problem.
Major Appliance Consumer Action Panel
20 North Wacker Driie
Chicago, IL 66606
MACAP will in turn inform us of your
action.
‘wAsHlNo
YAcHlNEs
k
ORYERS, SERVICE L REPNR
- Sew Whirlpool App4lmces or
Authorlmd
Whklpool Sewke
(Exampb:
XYZ Senke
Co.)
‘When asking for help or service:
Please provide a detailed description of
the problem, your appliance’s complete
model and serial numbers, and the purchase date. (See page 2.) This information will help us respond properly to your
request.
27
WHIRLPOOL@
Refrigerator
Warranty
LENGTH OF WARRANTY
WHIRLPOOL WILL PAY FOR
FULL ONE-YEAR
WARRANTY
FSP replacement parts and repair labor to correct
defects in materials or workmanship. Service must be
provided by an authorized Whirlpool service company.
From Date of Purchase
FULL FIVE-YEAR
WARRANTY
From Date of Purchase
FSP replacement parts and repair labor to correct defects
in materials or workmanship in the sealed refrigeration
system. These parts are:
4. Drier
1. Compressor
5. Connecting tubing
2. Evaporator
3. Condenser
Service must be provided by an authorized Whirlpool
service company.
WHIRLPOOL WILL NOT PAY FOR
A. Service calls to:
1. Correct the installation of your refrigerator.
2. Instruct you how to use your refrigerator.
3. Replace house fuses or correct house wiring or plumbing.
4. Replace light bulbs.
B. Repairs when your refrigerator is used in other than normal, single-family household
use.
C. Pickup and delivery. Your refrigerator is designed to be repaired in the home.
D. Damage to your refrigerator caused by accident, misuse, fire, flood, acts of God or use
of products not approved by Whirlpool.
E. Any fcod loss due to product failure.
F. Repairs to parts or systems caused by unauthorized modifications made to the
appliance.
CR3
WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so this limitation or exclusion may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to
state.
Outside the United States, a different warranty may apply. For details, please contact your
authorized Whirlpool distributor or military exchange.
If you need service, first see the “lf You Need Assistance or Service” section of this book.
After checking “If You Need Assistance or Service,” additional help can be found by calling
our Consumer Assistance Center telephone number, l-500-253-1 301, from anywhere in the
U.S.A.
PART NO. 2170711 Rev. A
0 lee4 wlllrlpod
colporahl
0 R~&Iered
Trademark
/ TM Trademark
01 WhIrlpool.
U.S.A.
Printed
In U.SA
Download PDF