SPECIFICATION DATA

Tensioned Dual Masking Electrol®
Automatic Electric Projection Screen Model
SPECIFICATION DATA
SUGGESTED SPECIFICATIONS:
projection screen(s),
(H) x
(W), electrically operated 120 volt (60 Hz) not
more than 4.8 amp. Shall have two specially designed motors mounted inside
two rollers, to be three wire with ground quick reversal type, oiled for life, with
automatic thermal overload cutout, integral gears, capacitor and an electric
brake to prevent coasting. To have pre-set limit switches to automatically stop
picture surfaces in the “up” and “down” positions. The fabric roller to be of rigid
aluminum. The mask roller to be of rigid metal. Screen fabric to be seamless,
flame retardant and mildew resistant vinyl with black masking borders
standard. Each side of the fabric to have tab guide cable system to maintain
even lateral tension and hold surface flat. To have masking fabric on sides to
convert the screen to different aspect ratios. Bottom of fabric to be inserted
into an aluminum slat bar with added weight to maintain vertical tension on
the screen surface. The ends of the slat to be protected by heavy duty plastic
caps enclosing a preset adjustable mechanism for screen tensioning. Bottom
of each masking fabric shall be formed into a pocket holding a flat steel bar.
Case to be of wood and be finished with a black primer coat, ready to accept
final finish by others. To be complete with a three position control switch and a
two position control switch in a two gang box with cover plate. Screen to be
listed by Underwriters’ Laboratories.
HDTV To NTSC Video Format Dimensions
HDTV Format
Viewing Area (H x W)
In.
Cm
45" x 80"
114 x 203
50" x 89"
127 x 226
54" x 96"
137 x 244
60" x 107"
152 x 272
69" x 123"
175 x 312
87" x 155"
221 x 394
HDTV
Nominal Diagonal
In.
Cm
92"
234
102"
259
110"
279
122"
310
141"
358
177"
450
Letterbox Format
Viewing Area (H x W)
In.
Cm
50" x 92½"
127 x 235
60" x 111"
152 x 282
69" x 128"
175 x 325
87" x 161"
221 x 409
Letterbox
Nominal Diagonal
In.
Cm
105"
267
126"
320
145"
368
183"
465
Cinemascope Format
Viewing Area (H x W)
In.
Cm
45" x 106"
114 x 269
49" x 115"
124 x 292
52" x 122"
132 x 310
54" x 126"
137 x 320
58" x 136"
147 x 345
65" x 153"
165 x 389
Cinemascope
Nominal Diagonal
In.
Cm
115"
292
125"
318
133"
338
138"
351
148"
376
166"
422
NTSC Video Viewing
Area (By Masking)
In.
Cm
45" x 60"
114 x 152
50" x 67"
127 x 170
54" x 72"
137 x 183
60" x 80"
152 x 203
69" x 92"
175 x 234
87" x 116"
221 x 295
NTSC Video
Nominal Diagonal
In.
Cm
75"
191
84"
213
90"
229
100"
254
120"
305
150"
381
Overall
Length of Case*
In.
Cm
103¼"
262
112¾"
286
120¼"
305
131¾"
335
149¾"
380
184¾"
469
Approx. Ship. Wt.
Lbs.
Kg
117
53.1
123
55.8
132
59.9
145
65.8
163
73.9
186
84.4
Overall
Length of Case*
In.
Cm
116¼"
295
135¾"
345
154¾"
393
190¾"
485
Approx. Ship. Wt.
Lbs.
Kg
117
50.4
140
63.5
157
71.2
180
81.7
Overall
Length of Case*
In.
Cm
129¼"
328
138¾"
352
146¼"
371
150¼"
382
160¾"
408
178¾"
454
Approx. Ship. Wt.
Lbs.
Kg
145
65.8
155
70.3
161
73.0
168
76.2
175
79.4
189
85.7
Letterbox To NTSC Video Format Dimensions
NTSC Video Viewing
Area (By Masking)
In.
Cm
50" x 67"
127 x 170
60" x 80"
152 x 203
69" x 92"
175 x 234
87" x 116"
221 x 295
NTSC Video
Nominal Diagonal
In.
Cm
84"
213
100"
254
120"
305
150"
381
Cinemascope To HDTV Format Dimensions
HDTV Viewing
Area (By Masking)
In.
Cm
45" x 80"
114 x 203
49" x 87"
124 x 221
52" x 92"
132 x 234
54" x 96"
137 x 244
58" x 104"
147 x 345
65" x 116"
165 x 295
HDTV
Nominal Diagonal
In.
Cm
92"
234
100"
254
106"
269
110"
279
119"
302
133"
338
*Add 3" (76mm) overall length of case for mounting brackets.
PRODUCT NOTES
WHEN ORDERING, MARK APPROPRIATE SELECTIONS:
• All viewing surfaces will be seamless.
1. Select size from charts on the other side.
• All viewing surfaces are standard with black
backing except Da-Tex® and Dual Vision.
2. Select viewing surface (All Da-Lite surfaces are GREENGUARD GOLD Certified.):
Da-Mat®
HD Progressive 1.1 Perf
• Audio Vision, High Contrast Audio Vision,High
Contrast Cinema Perf and HD Progressive 1.1 Perf
available in sizes up to 87" x 155" in HDTV Format
and 87" x 161" in Letterbox Format.
High Contrast Da-Mat®
Audio Vision
Pearlescent Da-Tex® (Rear)
Cinema Vision
High Contrast Audio Vision
• All screen sizes listed are viewing areas.
High Contrast Cinema Vision
Dual Vision
• Overall case length dimensions +/- ¼" (6mm).
High Contrast Cinema Perf
• All sizes come standard with 12" (305mm)
black drop at top.
3. Optional accessories:
• Extra drop may alter case dimensions.
Contact Da-Lite for details.
Dual Motor Low Voltage
Control System (DMC).
Radio Frequency Remote.
Silent Motor (available on sizes up
to 10' x 10').
Radio Frequency Range
Extender available
• Specifications subject to change without notice.
• Custom formats and sizes available upon request..
PRODUCT VIEWS
Infrared Remote.
SUGGESTED METHOD OF INSTALLATION
9"
83/4"
NOTE: Must Mark Hole Location Of
Screws In 3½" Panel For Removal, If
Covering With Tile.
NOTE: Drawings below show picture surface and mask in the
down position. Mask will be on front side of roller when retracted.
Method A
Case Length See Chart
(Suggested)
1/4" Lag Screws
Center Brackets
63/4"
Method B
Mounting
Bracket
93/16"
9"
11/2"
Audience
Side
11/2"
Motor End
Switch
Control
63/4"
Outlet
White box (black standard).
Wireless Remote Control for DMC.
• Detail dimensional drawings, wiring diagrams and
installation instructions available upon request.
11/2"
Mounting
Bracket
220 Volt (50Hz) Motor.
815/16"
Furring
Strip
Mounting
Joist
3/4" Finished
Ceiling
31/2"
Panel
Can Be Painted Same As Ceiling
Or Removed And Replaced With
Finished Ceiling
Aluminum Slat
Picture Surface
Masking Surface
3/16" x 1" Steel Slat
In Pocket
Offset mounting, recessed above ceiling. For
plaster, dry wall, tile or paneling. Bottom of case
painted same finish as ceiling.
11/2"
11/2"
93/16"
Furring
Strip
Mounting
Joist
3/4" Finished
Ceiling
31/2"
Panel
Ceiling Tile Cut To 1/4" Thick
(Attach With Mastic)
Aluminum Slat
93/16"
9"
Audience
Side
11/2"
Furring
Strip
31/2"
Panel
Finished
Ceiling
93/16"
Picture Surface
Masking Surface
3/16" x 1" Steel Slat In Pocket
Aluminum Slat
Offset mounting, recessed above ceiling. May be
adapted for 1/4" paneling for ceiling.
A Milestone AV Technologies Brand
3100 North Detroit Street
Warsaw, Indiana 46582
P: 574.267.8101 or 800.622.3737
F: 574.267.7804 or 877.325.4832
E: [email protected]
www.da-lite.com
DL–0241 12.13
© 2013 Milestone AV Technologies LLC. Printed in U.S.A.
Picture Surface
Masking Surface
3/16" x 1" Steel Slat In Pocket
Method D
Mounting
Bracket
11/2"
Mounting
Joist
Audience
Side
Offset mounting, recessed above ceiling. May be
adapted for 3/4" ceiling, but cut to 1/4" thick under
screen case and panel.
Method C
(Suggested)
1/4" Lag Screws
Mounting
Bracket
93/16"
9"
(Suggested)
1/4" Lag Screws
11/2"
(Suggested)
1/4" Bolts
Mounting
Joist
93/16"
Furring
Audience
Strip
Side
Suspended
Ceiling Tile
T-Bar
Furnished
With Ceiling
11/2"
31/2"
Panel
Picture Surface
Masking Surface
3/16" x 1" Steel Slat In Pocket
Aluminum Slat
Flush mounting, recessed above ceiling. For use
with dropped ceiling. May also be adapted for use
with acoustical or other ceiling 3/4" thick but cut to
1/4" thick under screen case and panel.
Project Name: Architect: Contractor: Phone: Reseller: Phone: