G-Series Pneumatic Dimensions Data Metric

G-Series Pneumatic Dimensions Data Metric
Data sheet
Sheet No.: GPM 3.01 RevB
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Double-Acting Actuators
G011XX (CW Model Shown)
Actuator Model
A
B
C
G01108
222.3
81.0
260.4
G01109
251.0
96.0
274.8
G01110
279.4
111.3
289.1
G01112
330.2
127.0
314.5
G01114
362.0
139.7
330.2
G010XX-M11 (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
B
G01108-M11
222.3
81.0
G01109-M11
251.0
96.0
G01110-M11
279.4
111.3
G01112-M11
330.2
127.0
G01114-M11
362.0
139.7
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.02 RevB
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Double-Acting Actuators
Mounting Pad Detail
Adjustable End Stops
& Jackscrews
Power
Module
Blind
End Cap
Module
Spring
Module
X (-ETS) Extended Travel Stop
693.9
402.1
1210.3
X (-33) End Stop
518.4
226.6
1023.9
Z (M3/M3HW) Jackscrew
750.3
442.7
1184.4
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.03 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Spring-Return Actuators
G011XX-SR (CW Model Shown)
Actuator Model
A
B
C
G01108-SR
222.3
81.0
260.4
G01109-SR
251.0
96.0
274.8
G01110-SR
279.4
111.3
289.1
G01112-SR
330.2
127.0
314.5
G01114-SR
362.0
139.7
330.2
G011XX-SR-M11 (CW Model Shown)
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
B
G01108-SR-M11
222.3
81.0
G01109-SR-M11
251.0
96.0
G01110-SR-M11
279.4
111.3
G01112-SR-M11
330.2
127.0
G01114-SR-M11
362.0
139.7
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.04 RevC
Date: April 2015
Dimensions – (Pneumatic) mm.
Spring-Return Actuators
Accessory Details
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
G-Series
Data sheet
Sheet No.: GPM 3.05 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Double-Acting Actuators
G21XX (CW Model Shown)
4x M12 x 1.75-6H x19 MM DEEP
Actuator Model
A
B
C
D
G2109
251.0
85.9
289.1
3/4 NPT
G2110
279.4
111.3
303.0
3/4 NPT
G2112
330.2
127.0
328.4
3/4 NPT
G2114
362.0
139.7
344.4
3/4 NPT
G2116
412.8
158.8
369.8
3/4 NPT
G21XX-M11 (CW Model Shown)
4x M12 x 1.75-6H
x19 MM DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
B
C
G2109-M11
251.0
85.9
3/4 NPT
G2110-M11
254.0
111.3
3/4 NPT
G2112-M11
330.2
127.0
3/4 NPT
G2114-M11
362.0
139.7
3/4 NPT
G2116-M11
412.8
158.8
3/4 NPT
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.06 RevB
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
X (-ETS)
Extended
Travel Stop
X
End Stop
Z
(M3/M3HW)
Jackscrew
719.3
543.8
890.8
Power Module
Blind End Cap Module
427.5
252.0
572.8
Spring Module
1224.8
1049.3
1278.9
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.07 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Spring-Return Actuators
G21XX-SR (CW Model Shown)
4x M12 x 1.75
4x M12 x 1.75-6H
x19 MM DEEP
Actuator Model
A
B
C
D
G2109-SR
251.0
85.9
304.0
3/4 NPT
G2110-SR
279.4
111.3
304.0
3/4 NPT
G2112-SR
330.2
127.0
328.4
3/4 NPT
G2114-SR
362.0
139.7
344.4
3/4 NPT
G2116-SR
412.8
158.8
369.8
3/4 NPT
G21XX-SR-M11 (CW Model Shown)
4x M12 x 1.75-6H
x19 MM DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
B
C
G2109-SR-M11
251.0
85.9
3/4 NPT
G2110-SR-M11
254.0
111.3
3/4 NPT
G2112-SR-M11
330.2
127.0
3/4 NPT
G2114-SR-M11
362.0
139.7
3/4 NPT
G2116-SR-M11
412.8
158.8
3/4 NPT
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.08 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Spring-Return Actuators
Accessory Details
.
4x M12 x 1.75-6H
x19 MM DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.09 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Double-Acting Actuators
G31XX (CW Model Shown)
4x M12 x 1.75-6H
x19 MM DEEP
Actuator Model
A
B
C
D
G3110
279.4
111.3
378.7
3/4 NPT
G3112
330.2
131.8
404.1
3/4 NPT
G3114
362.0
144.3
419.9
3/4 NPT
G3116
412.8
158.8
445.3
3/4 NPT
G3120
514.4
203.2
496.1
3/4 NPT
G31XX-M11 (CW Model Shown)
4x M12 x 1.75-6H
x19 MM DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
B
C
G3110-M11
279.4
111.3
3/4 NPT
G3112-M11
330.2
131.8
3/4 NPT
G3114-M11
362.0
144.3
3/4 NPT
G3116-M11
412.8
158.8
3/4 NPT
G3120-M11
514.4
203.2
3/4 NPT
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.10 RevB
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
X (-ETS)
Extended
Travel Stop
X
End Stop
Z
(M3/M3HW)
Jackscrew
840.5
623.1
938.3
Power Module
Blind End Cap Module
497.1
281.9
580.6
Spring Module
1353.8
1136.4
1397.0
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.11 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Spring-Return Actuators
G31XX-SR (CW Model Shown)
4x M12 x 1.75-6H
x19 MM DEEP
.
Actuator Model
A
B
C
D
G3110-SR
279.4
111.3
399.5
3/4 NPT
G3112-SR
330.2
131.8
404.1
3/4 NPT
G3114-SR
362.0
144.3
419.9
3/4 NPT
G3116-SR
412.8
158.8
445.3
3/4 NPT
G3120-SR
514.4
203.2
496.1
3/4 NPT
G31XX-SR-M11 (CW Model Shown)
4x M12 x 1.75-6H
x19 MM DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
B
C
G3110-SR-M11
279.4
111.3
3/4 NPT
G3112-SR-M11
330.2
131.8
3/4 NPT
G3114-SR-M11
362.0
144.3
3/4 NPT
G3116-SR-M11
412.8
158.8
3/4 NPT
G3120-SR-M11
514.4
203.2
3/4 NPT
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.12 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Spring-Return Actuators
Accessory Details
.
4x M12 x 1.75-6H
x19 MM DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.13 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Double-Acting Actuators
G41XX (CW Model Shown)
4x M12 x 1.75-6H
x19 MM DEEP
Actuator Model
A
B
C
D
G4112
330.2
138.2
449.3
3/4 NPT
G4114
362.0
143.0
465.3
3/4 NPT
G4116
412.8
158.8
490.7
3/4 NPT
G4120
514.4
206.5
541.5
3/4 NPT
G4124
616.0
244.6
592.3
3/4 NPT
G4128
736.6
292.1
652.5
1.0 NPT
G41XX-M11 (CW Model Shown)
4x M12 x 1.75-6H
x19 MM DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
B
C
G4112-M11
330.2
138.2
3/4 NPT
G4114-M11
362.0
143.0
3/4 NPT
G4116-M11
412.8
158.8
3/4 NPT
G4120-M11
514.4
206.5
3/4 NPT
G4124-M11
616.0
244.6
3/4 NPT
G4128-M11
736.6
292.1
1.0 NPT
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.14 RevB
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
Power Module
X
End Stop
1009.4
790.4
Blind End Cap Module
592.3
373.4
Spring Module
1539.5
1263.7
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
X
Extended
Travel Stop
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.15 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Spring-Return Actuators
G41XX-SR (CW Model Shown)
4x M12 x 1.75-6H
x19 MM DEEP
Actuator Model
A
B
C
D
G4112-SR
330.2
138.2
486.2
3/4 NPT
G4114-SR
362.0
143.0
486.2
3/4 NPT
G4116-SR
412.8
158.8
490.7
3/4 NPT
G4120-SR
514.4
206.5
541.5
3/4 NPT
G4124-SR
616.0
244.6
592.3
3/4 NPT
G4128-SR
736.6
292.1
652.5
1.0 NPT
G41XX-SR-M11 (CW Model Shown)
4x M12 x 1.75-6H
x19 MM DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
B
C
G4112-SR-M11
330.2
138.2
3/4 NPT
G4114-SR-M11
362.0
143.0
3/4 NPT
G4116-SR-M11
412.8
158.8
3/4 NPT
G4120-SR-M11
514.4
206.5
3/4 NPT
G4124-SR-M11
616.0
244.6
3/4 NPT
G4128-SR-M11
736.6
292.1
1.0 NPT
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.16 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Spring-Return Actuators
Lug/Accessory Details
4x M12 x 1.75-6H
x19 MM DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.17 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Double-Acting Actuators
G51XX (CW Model Shown)
4x M12 x 1.75-6H x19 MM DEEP
Actuator Model
A
B
C
D
G5116
412.8
179.3
555.8
3/4 NPT
G5120
514.4
203.2
606.6
3/4 NPT
G5124
616.0
235.0
657.4
1 NPT
G5128
736.6
306.3
717.6
1 NPT
G5132
838.2
355.6
768.4
1-1/2 NPT
G5136
946.2
406.4
822.5
1-1/2 NPT
G51XX-M11 (CW Model Shown)
4x M12 x 1.75-6H x19 MM DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
B
C
G5116-M11
412.8
179.3
3/4 NPT
G5120-M11
514.4
203.2
3/4 NPT
G5124-M11
616.0
235.0
1 NPT
G5128-M11
736.6
306.3
1-1/2 NPT
G5132-M11
838.2
355.6
1-1/2 NPT
G5136-M11
946.2
406.4
1-1/2 NPT
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.18 RevB
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
Power Module
X
End Stop
1271.8
979.9
Blind End Cap Module
717.6
441.5
Spring Module
1790.7
1333.5
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
X
Extended
Travel Stop
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.19 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Spring-Return Actuators
G51XX-SR (CW Model Shown)
4x M12 x 1.75-6H x19 MM DEEP
Actuator Model
A
B
C
D
G5116-SR
412.8
179.3
603.3
3/4 NPT
G5120-SR
514.4
203.2
606.6
3/4 NPT
G5124-SR
616.0
235.0
657.4
1 NPT
G5128-SR
736.6
306.3
717.6
1-1/2 NPT
G5132-SR
838.2
355.6
768.4
1-1/2 NPT
G5136-SR
946.2
406.4
822.5
1-1/2 NPT
G51XX-SR-M11 (CW Model Shown)
4x M12 x 1.75-6H x19 MM DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
B
C
G5116-SR-M11
412.8
179.3
3/4 NPT
G5120-SR-M11
514.4
203.2
3/4 NPT
G5124-SR-M11
616.0
235.0
1 NPT
G5128-SR-M11
736.6
306.3
1-1/2 NPT
G5132-SR-M11
838.2
355.6
1-1/2 NPT
G5136-SR-M11
946.2
406.4
1-1/2 NPT
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.20 RevB
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Spring-Return Actuators
Lug/Accessory Details
4x M12 x 1.75-6H
x19 MM DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.21 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Double-Acting Actuators
G71XX or G712XX (CW Model Shown)
4x M12 x 1.75-6H x19 MM DEEP
Actuator Model
A
B
C
D
G7120
514.4
222.3
669.0
3/4 NPT
G7124
616.0
244.6
719.8
1-1/2 NPT
G7128
736.6
285.8
780.0
1-1/2 NPT
G7132
838.2
355.6
830.8
1-1/2 NPT
G7136
946.2
406.4
884.9
1-1/2 NPT
G71228
736.6
285.8
780.0
1-1/2 NPT
G71XX-M11 (CW Model Shown)
4x M12 x 1.75-6H x19 MM DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
B
C
G7120-M11
514.4
222.3
3/4 NPT
G7124-M11
616.0
244.6
1-1/2 NPT
G7128-M11
736.6
285.8
1-1/2 NPT
G7132-M11
838.2
355.6
1-1/2 NPT
G7136-M11
946.2
406.4
1-1/2 NPT
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.22 RevB
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
Power Module
X
End Stop
1548.6
1186.7
Blind End Cap Module
902.5
540.5
Spring Module
2313.9
1382.8
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
X
Extended
Travel Stop
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.23 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Spring-Return Actuators
G71XX-SR or G71TXX-SR (CW Model Shown)
4x M12 x 1.75-6H x19 MM
DEEP
Actuator Model
A
B
C
D
G7120-SR
514.4
222.3
751.6
3/4 NPT
G7124-SR
616.0
244.6
751.6
1-1/2 NPT
G7128-SR
736.6
285.8
780.0
1-1/2 NPT
G7132-SR
838.2
355.6
830.8
1-1/2 NPT
G7136-SR
946.2
406.4
884.9
1-1/2 NPT
G71T28-SR
736.6
285.8
780.0
1-1/2 NPT
G71XX-SR-M11 or G71TXX-SR-M11 (CW Model Shown)
4x M12 x 1.75-6H x19 MM
DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
B
C
G7120-SR-M11
514.4
222.3
3/4 NPT
G7124-SR-M11
616.0
244.6
1-1/2 NPT
G7128-SR-M11
736.6
285.8
1-1/2 NPT
G7132-SR-M11
838.2
355.6
1-1/2 NPT
G7136-SR-M11
946.2
406.4
1-1/2 NPT
G71T28-SR-M11
736.6
285.8
1-1/2 NPT
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.24 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Spring-Return Actuators
Lug/Accessory Details
4x M12 x 1.75
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.25 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Double-Acting Actuators
G81XX or G812XX (CW Model Shown)
4x M12 x 1.75-6H x19 MM DEEP
Actuator Model
A
B
C
D
G8124
616.0
244.6
805.4
1-1/2 NPT
G8128
736.6
314.5
865.6
1-1/2 NPT
G8132
838.2
339.9
916.4
1-1/2 NPT
G8136
946.2
406.4
970.5
1-1/2 NPT
G8140
1047.8
457.2
1021.3
2 NPT
G81232
838.2
339.9
916.4
1-1/2 NPT
G81236
946.2
406.4
970.5
1-1/2 NPT
G81XX-M11 (CW Model Shown)
4x M12 x 1.75-6H x19 MM DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
B
C
G8124-M11
616.0
244.6
1-1/2 NPT
G8128-M11
736.6
314.5
1-1/2 NPT
G8132-M11
838.2
339.9
1-1/2 NPT
G8136-M11
946.2
406.4
1-1/2 NPT
G8140-M11
1047.8
457.2
2NPT
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.26 RevB
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
X
Extended
Travel Stop
X
End Stop
Power Module
1801.9
1381.5
Blind End Cap Module
1032.8
633.0
Spring Module
2845.8
1803.4
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.27 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Spring-Return Actuators
G81XX-SR or G81TXX-SR (CW Model Shown)
4x M12 x 1.75-6H x19 MM
DEEP
Actuator Model
A
B
C
D
G8124-SR
616.0
244.6
837.2
1-1/2 NPT
G8128-SR
736.6
314.5
865.6
1-1/2 NPT
G8132-SR
838.2
339.9
916.4
1-1/2 NPT
G8136-SR
946.2
406.4
970.5
1-1/2 NPT
G8140-SR
1047.8
457.2
1021.3
2 NPT
G81T32-SR
838.2
339.9
916.4
1-1/2 NPT
G81T36-SR
946.2
406.4
970.5
1-1/2 NPT
G81XX-SR-M11 or G81TXX-SR-M11 (CW Model Shown)
4x M12 x 1.75-6H
x19 MM DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
B
C
G8124-SR-M11
616.0
244.6
1-1/2 NPT
G8128-SR-M11
736.6
314.5
1-1/2 NPT
G8132-SR-M11
838.2
339.9
1-1/2 NPT
G8136-SR-M11
946.2
406.4
1-1/2 NPT
G8140-SR-M11
1047.8
457.2
2 NPT
G81T32-SR-M11
838.2
339.9
1-1/2 NPT
G81T36-SR-M11
946.2
406.4
1-1/2 NPT
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.28 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Spring-Return Actuators
Lug/Accessory Details
8x M12 x 1.75-6H
x19 MM DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.29 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Double-Acting Actuators
G101XX or G1012XX (CW Model Shown)
8x M12 x 1.75-6H x19 MM
DEEP
Actuator Model
A
B
C
D
G10128
736.6
314.5
1018.0
1-1/2 NPT
G10132
838.2
339.9
1068.8
1-1/2 NPT
G10136
946.2
406.4
1122.9
2 NPT
G10140
1122.9
457.2
1173.7
2 NPT
G101232
838.2
339.9
1068.8
1-1/2 NPT
G101236
946.2
406.4
1122.9
2 NPT
G101240
1047.8
457.2
1173.7
2 NPT
G101XX-M11 (CW Model Shown)
4x M12 x 1.75-6H x19 MM
DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
B
C
G10128-M11
736.6
314.5
1-1/2 NPT
G10132-M11
838.2
339.9
1-1/2 NPT
G10136-M11
946.2
406.4
2 NPT
G10140-M11
1047.8
457.2
2 NPT
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.30 RevB
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Double-Acting Actuators
Valve/Accessory Mounting Details
Adjustable End Stops
X
Extended
Travel Stop
X
End Stop
Power Module
2262.6
1669.0
Blind End Cap Module
1325.6
757.4
Spring Module
3429.5
2051.6
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.31 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Spring-Return Actuators
G101XX-SR or G101TXX-SR (CW Model Shown)
8x M12 x 1.75-6H x19 MM
DEEP
Actuator Model
A
B
C
D
G10128-SR
736.6
314.5
1018.0
1-1/2 NPT
G10132-SR
838.2
339.9
1068.8
1-1/2 NPT
G10136-SR
946.2
406.4
1122.9
2 NPT
G10140-SR
1047.8
457.2
1173.7
2 NPT
G101T32-SR
838.2
339.9
1068.8
2 NPT
G101T36-SR
946.2
406.4
1122.9
2 NPT
G101T40-SR
1047.8
457.2
1173.7
2 NPT
G101XX-SR-M11 or G101TXX-SR-M11 (CW Model Shown)
8x M12 x 1.75-6H
x19 MM DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Actuator Model
A
B
C
G10128-SR-M11
736.6
314.5
1-1/2 NPT
G10132-SR-M11
838.2
339.9
1-1/2 NPT
G10136-SR-M11
946.2
406.4
2 NPT
G10140-SR-M11
1047.8
457.2
2 NPT
G101T32-SR-M11
838.2
339.9
2 NPT
G101T36-SR-M11
946.2
406.4
2 NPT
G101T40-SR-M11
1047.8
457.2
2 NPT
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Data sheet
Sheet No.: GPM 3.32 RevC
Date: April 2015
G-Series
Dimensions – (Pneumatic) mm.
Spring-Return Actuators
Lug/Accessory Details
8x M12 x 1.756H x19 MM
DEEP
Note:Not Certified dimensional drawings. Such drawings available on request. Contact factory with correct model designation and serial number.
All dimensions are expressed in millimeters.
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement