Wrangler | JEEP P5063 | Owner`s manual | Wrangler JEEP P5063 Owner`s manual

Please read this manual and save it with
your original sales receipt.
Tools needed for assembly:
Phillips Screwdriver and
Slotted Screwdriver (both not included).
Use only with a Power Wheels®
6 Volt Rechargeable Battery with A-style
Connector and Built-in Thermal Fuse
and a Power Wheels®
Super 6 Volt Charger (both included).
Product features may vary from the picture above.
Owner's Manual
with Assembly Instructions
For Model P5063
A
TABLE OF CONTENTS
A Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
B Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
C Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
D Parts Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
E Battery Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
F Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
G Decoration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
H Battery Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
I Battery Care and Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
J Safe Driving Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
K Vehicle Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
L Vehicle Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
M Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
N Problems and Solutions Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
A
IMPORTANT INFORMATION
• Your new vehicle requires adult assembly. Please set aside at
least 45 minutes for assembly.
• You must charge your battery for 18 - 30 hours before you use
your vehicle for the first time. We recommend that you start
charging your battery before beginning assembly. Please see
Battery Charging beginning on page 7 for detailed instructions.
• Read this manual carefully for important safety information
and operating instructions before using your vehicle. Keep this
manual for future reference as it contains
important information.
• This vehicle is designed for use on: grass, asphalt and other
hard surfaces; on generally level terrain; and by children 2 - 6
years of age and older.
• Use this vehicle ONLY outdoors. Most interior flooring can be
damaged by riding this vehicle indoors. Fisher-Price® will not
be responsible for damage to the floor if the vehicle is
used indoors.
• To prevent damaging the motors and gears, teach your child to
stop the vehicle before switching direction. Do not tow anything
behind the vehicle or overload it. Do not exceed the maximum
weight capacity of 65 lbs (29.5 kg).
2
• If you have any questions about your Power Wheels® vehicle,
please call our toll-free service lines at 1-800-348-0751 from
9 AM to 7 PM (EST) Monday through Friday and 11 AM to 5 PM
(EST) Saturday. Trained customer service representatives are
available to take your call in English or French. Habla Español? Si
usted tiene alguna pregunta ó necesita asistencia llame gratis
1-800-348-0755 para los Estados Unidos. Tenemos
representantes que hablan español para atender su llamada.
• For your convenience, Power Wheels® maintains an Authorized
Service Center Network with more than 300 authorized service
centers nationwide. Our authorized service centers will repair or
replace parts under warranty at no extra charge, and can perform
non-warranty repairs for a minimal charge. To find the authorized
service center nearest you, please visit us on-line at
www.powerwheels.com or call 1-800-348-0751.
• To register your vehicle, please visit us on-line at
www.powerwheels.com.
P5063pr-0923
P5063a-0920
WARNINGS AND CAUTIONS
B
ELECTRICAL HAZARD
WARNING
• Battery can fall out and injure a child if vehicle tips over. Always use battery retainer.
• PREVENT FIRE
- Never modify the electrical system. Alterations could cause a fire resulting in serious injury
and could also ruin the electrical system.
- Use of the wrong type battery or charger could cause a fire or explosion resulting in
serious injury.
- Use of Power Wheels® components in products other than Power Wheels® vehicles could
cause overheating, fire or explosion.
• The battery must be handled by adults only. The battery is heavy and contains sulfuric acid
(electrolyte). Dropping the battery could result in serious injury.
• Never allow children to charge the battery. Battery charging must be done by adults only. A child
could be injured by the electricity involved in charging the battery.
• Never lift or carry the battery by the wires or connector. This can damage the battery and
possibly cause a fire resulting in serious injury. Lift and carry the battery by the case only.
• Read the safety instructions on the battery.
• Examine the battery, charger and their connectors for excessive wear or damage each time
you charge the battery. If damage or excessive wear is detected, do not use the charger or the
battery until you have replaced the worn or damaged part.
• HOT motors. Handle carefully.
RIDING HAZARD
WARNING
• Prevent Injuries and Deaths
• Direct Adult Supervision Required.
• Never Ride at Night.
• Keep Children Within Safe Riding Areas.
These areas must be:
- away from swimming pools and other bodies of water to prevent drownings
- generally level to prevent tipovers
- away from steps, cars, steep inclines, roads and alleys.
• Riding Rules
Make sure children know and follow these rules for safe driving and riding:
- Always sit on the seat.
- Always wear shoes.
- Only 1 (one) rider at a time.
CAUTION
• In the unassembled state, this package contains small parts. Adult assembly is required.
• Use the charger in dry locations only.
P5063a-0920
P5063pr-0923
3
PARTS
C
• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this
product to the store.
• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts
are discarded.
• Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove
any excess lubricant.
Windshield
Vehicle
Steering Wheel
Roll Bar
Brush Guard
Dashboard
Steering Column
Hood
Steering Column Cap
Seat
4
P5063pr-0923
P5063a-0920
TABLE OF
PARTS
CONTENTS
A
C
Steering Wheel Cap
Hood Latch - 2
Spacer - 2
#8 x 4" Screw - 2
Super 6 Volt Charger
#8 x ¾" Screw – 3
#10 x 1" Screw – 8
6 Volt Battery
5/32"
x 1½" Pin
For your convenience, we included extra fasteners!
Note: Tighten and loosen all screws with a Phillips
screwdriver. Do not over-tighten the screws.
Part Not Shown: Label Sheet - 2
5
P5063a-0920
Fasteners Shown Actual Size
P5063pr-0923
5
PARTS PICTURE
D
A
16
8
9
3
10
11
7
2
14
5
4
13
15
1
6
12
1
2
3
4
5
6
6
Vehicle
Dashboard
Windshield
Hood
Hood Latch - 2
Brush Guard
7 Steering Column
8 Steering Wheel
9 Steering Wheel Cap
10 Roll Bar
11 Seat
12 Steering Column Cap
13 Super 6 Volt Charger
14 6 Volt Battery
15 Spacer - 2
16 5/32" x 1½" Pin
Parts Not Shown
#10 x 1" Screw - 8
#8 x ¾" Screw - 3
#8 x 4" Screw - 2
Label Sheet - 2
P5063a-0920
BATTERY CHARGING
E
ELECTRICAL HAZARD
WARNING
• Battery can fall out and injure a child
if vehicle tips over. Always use battery
retainer.
• PREVENT FIRE
- Never modify the electrical system.
Alterations could cause a fire resulting
in serious injury and could also ruin the
electrical system.
- Use of the wrong type battery or charger
could cause a fire or explosion resulting in
serious injury.
- Use of Power Wheels® components in
products other than Power Wheels®
vehicles could cause overheating, fire
or explosion.
• The battery must be handled by adults only.
The battery is heavy and contains sulfuric
acid (electrolyte). Dropping the battery
could result in serious injury.
• Never allow children to charge the battery.
Battery charging must be done by adults
only. A child could be injured by the electricity involved in charging the battery.
• Never lift or carry the battery by the wires
or connector. This can damage the battery
and possibly cause a fire resulting in
serious injury. Lift and carry the battery by
the case only.
• Read the safety instructions on the battery.
• Examine the battery, charger and their
connectors for excessive wear or damage
each time you charge the battery. If
damage or excessive wear is detected, do
not use the charger or the battery until you
have replaced the worn or damaged part.
P5063a-0920
CAUTION
Use the charger in dry locations only.
About Thermal Fuses
Your Power Wheels 6 volt battery with A-style connector
is equipped with a built-in thermal fuse. The thermal fuse is a
self-resetting safety device which automatically “trips” and shuts
down operation of the vehicle if the vehicle is overloaded or the
driving conditions too severe. Once a fuse has “tripped”, remove
your foot from the pedal and wait approximately 25 seconds
before operating the vehicle again.To avoid repeated automatic
shut-downs, do not overload the vehicle by exceeding the 65 lbs
(29.5 kg.) maximum weight capacity or by towing anything
behind the vehicle. Avoid severe driving conditions, such as
driving up slopes or running into fixed objects, which can cause
the wheels to stop spinning while power is still being supplied
to the motors and make sure your child stops the vehicle before
switching speeds or direction.
If a thermal fuse in a battery continually trips under normal
driving conditions, please contact your local Power Wheels®
Authorized Service Center. For the location of the Authorized
Service Center nearest to you, visit us on-line at
www.powerwheels.com, or call 1-800-348-0751.
Important Notes
• Your new battery must be charged for at least 18 hours
before you use it in your vehicle for the first time.
• We recommend that you start charging your battery before
beginning assembly of your new vehicle.
• The battery must be upright while charging.
• The charger is not a toy.
• Do not short circuit the battery.
• You do not need to remove the battery from your vehicle to
recharge it.
• Before charging the battery, examine the battery case for cracks
and other damage which may cause sulfuric acid (electrolyte)
to leak during the charging process. If damage is detected, do
not charge the battery or use it in your vehicle. Battery acid is
very corrosive and can cause severe damage to surfaces
it contacts.
• Do not charge the battery on a surface (such as kitchen counter
tops) which could be damaged by the acid contained inside the
battery. Take precautions to protect the surface on which you
charge your battery.
• Use only a Power Wheels® Super 6 volt charger with an A-style
connector (input 120 VAC, 60 Hz with an output of 6 VDC,
7.2W) to charge your Power Wheels® 6 volt battery.
• Adults Note: Regularly examine the charger for damage to the
cord, plug, housing or other parts that may result in the risk of
fire, electric shock or injury. In the event of any damage, do not
use the charger until the damage has been properly repaired.
Please call 1-800-348-0751.
• If your battery is old and will not accept a charge, do not leave
it in the vehicle. Always remove a dead battery from the vehicle.
P5063pr-0923
7
TABLE
BATTERY
OF CHARGING
CONTENTS
A
E
A-Style
Charger Connector
A-Style
Battery
Connector
Power
Indicator
WARNING
P R E V E N T
F I R E
•
D o
n o t
b y p a s s
a
P o w e r
W h e e l
•
U s e
o n l y
a
R e d
P o w e r
W h e e l s
•
N e v e r
m o d i f y
t h e
e l e c t r i c a l
O R
O P E R A
T E
1
GAP
Incorrect
NO GAP
Correct
• Plug the battery connector and charger connector together.
Push firmly to make sure the two connectors are
completely joined.
8
2
• Plug the charger into a standard wall outlet.
Notes:
- Use the charger only in a wall outlet. Do not plug the charger
into a ceiling outlet.
- If power flow to the wall outlet is controlled by a switch, make
sure the switch is "ON".
- The power indicator on the charger does not indicate the charge
status of your battery. The power indicator allows you to see
that there is power from the wall outlet.
• Before first time use, charge the battery for at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery for at least 14 hours after each use of
your vehicle. Do not charge a battery longer than 30 hours.
• Once the battery is charged, disconnect the charger connector
from the battery connector. Unplug the charger from the wall
outlet. The battery is now charged and is ready to be installed
in your vehicle.
P5063a-0920
P5063pr-0923
ASSEMBLY
F
WARNING
Children can be harmed by small parts,
sharp edges and sharp points in the vehicle's
unassembled state, or by electrical items.
Care should be taken in unpacking and
assembly of the vehicle. Children should not
handle parts, including the battery, or help in
assembly of the vehicle.
Seat Tabs
Slots
1
FRONT VIEW
• Fit both tabs on the front end of the seat into the slots in
the vehicle.
P5063a-0920
P5063pr-0923
9
ASSEMBLY
F
#10 x 1" Screw
Dashboard
4
2
• Insert a #10 x 1" screw into the back edge of the seat. Tighten
the screw.
• Place the dashboard on top of the vehicle, as shown.
• Insert five #10 x 1" screws into the dashboard and tighten.
Steering Wheel
Large Opening
Roll Bar
Large Opening UP
Steering Column
Hole
Hole
Bend
Upright
5
3
• Position the steering wheel with the large opening UP.
• Position the steering column so that the bend is UP, as shown.
• Fit the steering column through the center hole in the
steering wheel.
• Position the roll bar so that it bends toward the back end of
the vehicle.
• Insert and "snap" the roll bar into the large holes in the top side
of the vehicle, as shown.
• Pull up on the roll bar to be sure it is secure.
10
P5063pr-0923
P5063a-0920
ASSEMBLY
F
End of Steering Column
Large Hole in
Dashboard
Steering
Column
/ " x 1½" Pin
5 32
Bend Up
PUSH
6
• While holding the steering wheel, grasp the steering column
and push it up as far as it will go.
• Insert the 5/32" x 1½" pin through the hole in the end of the
steering column.
8
• Insert the steering column assembly into the large hole in the
dashboard. Make sure the bend in the steering column is UP.
Steering Wheel Cap
Steering Wheel
Steering Column Cap
PULL
7
End of Steering Column
• Now, pull the steering column down to fit the pin into the
grooved area in the center of the steering wheel.
• Fit the steering cap into the center of the steering wheel. Be
sure to align the notch in the steering wheel cap with the tab
in the center of the steering wheel.
• Insert two #8 x ¾" screws into the steering wheel cap and
tighten.
P5063a-0920
Steering Linkage
9
BOTTOM VIEW
• Carefully, turn the vehicle over, keeping the steering wheel and
steering column in place.
• Fit the end of the steering column through the hole in the
steering linkage.
• Fit a steering column cap on the end of the steering column
and hold it in place.
P5063pr-0923
11
ASSEMBLY
F
Hood Latches
10
12
• Insert a #8 x ¾" screw through the large opening in the
steering column cap and the hole in the steering column.
Tighten the screw.
Slots
• Insert a hood latch into each slot in the front end of the vehicle.
• Turn each hood latch a 1/4 turn to fit in place. Pull up on the
hood latches to be sure they are secure.
Windshield Wiper
Large
Tab
Large
Tab
Dashboard Slots
Slot
Slot
11
Hood Tabs
FRONT VIEW
• Turn the vehicle upright.
• Position the windshield so that the molded detail on the wipers
faces the front end of the vehicle.
• Insert and "snap" both large tabs on the windshield into the
large slots in the dashboard.
• Pull up on the windshield to be sure it is secure.
12
13
• Insert the tabs on the rear edge of the hood into the slots in
the front of the dashboard.
• Pull the hood forward. Lower the hood closed.
P5063pr-0923
P5063a-0920
ASSEMBLY
F
A Spacers
Lock
Fastener
Lock
Fastener
14
Unlocked
Locked
• Using a slotted screwdriver, turn each lock fastener in the hood
1/4 turn to the locked
position.
IMPORTANT! Remember to keep the lock fasteners locked at
all times to prevent children from accessing the vehicle
battery compartment.
B
#8 x 4" Screws
16
• Fit the spacers between the upper holes of the brush guard
and the front end of the vehicle A .
• Insert two #8 x 4" screws through the two upper holes in the
brush guard, through the spacers and into the front end of the
vehicle B . Tighten the screws.
15
Brush Guard
• Fit the brush guard to the front end of the vehicle.
Hint: Using the end of a Phillips screwdriver, poke a hole in the
thin plastic covering over the lower holes in the brush guard.
• Insert two #10 x 1" screws through the lower holes in the
brush guard and into the front end of the vehicle. Tighten
the screws.
P5063a-0920
P5063pr-0923
13
DECORATION
G
Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind:
• Wash your hands before applying the labels.
• Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations.
• For best results, avoid repositioning a label once it has been applied to the vehicle.
• After applying a label, rub the label firmly with a clean, dry cloth to make sure the label is adhered to your vehicle.
Start at the center of a label, and smooth towards the outer edges to remove air bubbles.
6
5
5
13
12
10
14
11
9
Jeep® and the Jeep® grille design are registered trademarks
of Chrysler LLC. Jeep® Wrangler and it’s trade dress are used
under license from Chrysler LLC. © Chrysler LLC 2008.
10
REAR VIEW
14
P5063pr-0923
P5063a-0920
DECORATION
G
1
1
7
8
15
TM
3
2
16
FRONT LEFT SIDE
1
4
8
2
1
16
FRONT RIGHT SIDE
P5063a-0920
P5063pr-0923
15
BATTERY INSTALLATION
H
IMPORTANT! Use only a Power Wheels® 6 volt battery with
A-style connector and built-in thermal fuse. Use of any other
battery will damage your vehicle. Make sure that you charge
the battery for at least 18 hours using the enclosed Power
Wheels® Super 6 volt charger before operating your vehicle
for the first time. Charge the battery for at least 14 hours after
each use of the vehicle. Never charge the battery longer than
30 hours. Failure to follow these instructions may damage your
battery and will void your warranty.
Battery
Connector
Motor Harness
Connector
Hood
3
NO GAP
GAP
Incorrect
1
Unlocked
Locked
• Using a slotted screwdriver, turn each lock fastener 1/4 turn to
the unlocked position.
• Lift the hood to access the battery compartment.
Correct
• Plug the battery connector into the motor harness connector.
Note: If the battery connector will not plug into the motor
harness connector, turn it over and try again! Do not force the
battery connector into the motor harness connector.
Hood
Power Wheels®
6 Volt Battery
2
Slide Battery
Retainer
• Slide the battery retainer open.
• Place the battery in the battery compartment and release the
battery retainer.
16
4
Unlocked
Locked
• Lower the hood on the vehicle. Using a slotted screwdriver,
turn each lock fastener 1/4 turn to the locked
position.
IMPORTANT! Remember to keep the lock fasteners locked
at all times to prevent children from accessing the battery
compartment.
P5063pr-0923
P5063a-0920
BATTERY CARE AND DISPOSAL
I
Care
Disposal
If a battery leak develops, avoid contact with the leaking acid
and place the damaged battery in a plastic bag. See information
below for proper disposal.
If acid comes in contact with skin or eyes, flush with cool water
for at least 15 minutes and call a physician.
If acid is internally ingested, give water, milk of magnesia or
egg whites immediately. Never give emetics or induce vomiting.
Call a physician.
• Charge a new battery for at least 18 hours before first use.
Never charge the battery longer than 30 hours. Overcharging or
undercharging the battery may shorten battery life and decrease
vehicle running time.
• After the first charge, recharge the battery for at least 14 hours
after each use. Never charge the battery longer than 30 hours.
Charge the battery after each use, regardless of how long the
vehicle was used.
• The battery must be upright while charging.
• Do not allow the battery to run down completely
before charging.
• Charge the battery before storing the vehicle.
• Charge the battery at least once per month, even if the vehicle
has not been used.
• Leaving the battery in a discharged condition will ruin it.
• Always remove an exhausted battery from the vehicle. Battery
leakage and corrosion can damage the vehicle.
• Do not store the battery on a surface (such as a kitchen counter
top) which could be damaged by the acid contained inside the
battery. Take precautions to protect the surface on which you
store the battery.
• Do not store the battery in temperatures above 75° F or
below -10° F.
• Use only a Power Wheels® 6 volt battery. Remember to charge
the new battery for at least 18 hours before first use.
• Prevent the battery from moving freely inside the battery
compart-ment. Always use the battery retainer to secure the
battery in the battery compartment.
• Examine the battery, charger and their connectors for excessive
wear or damage each time you charge the battery. If damage is
detected, do not use the charger or the battery until you have
replaced the worn or damaged part.
• Your Power Wheels® battery is a non-spillable sealed leadacid battery. They must be recycled or disposed of in an
environmentally sound manner.
• Do not dispose of a lead-acid battery in a fire. The battery may
explode or leak.
• Do not dispose of a lead-acid battery in your regular, household
trash. The incineration, landfilling or mixing of sealed lead-acid
batteries with household trash is prohibited by law in most areas.
• Protect the environment by not disposing of this product with
household waste (2002/96/EC). Check your local authority for
recycling advice and facilities (Europe only).
• Return an exhausted battery to a federal or state approved
lead-acid battery recycler, such as a Power Wheels® authorized
service center or a local seller of automotive batteries. For the
authorized service center location nearest to you, please visit us
on-line at www.powerwheels.com or call 1-800-348-0751.
Contact your local waste management officials for other
information regarding the environmentally sound collection,
recycling and disposal of lead-acid batteries. If you live in the
State of Florida or the State of Minnesota, it is prohibited by law
for anyone to throw away lead-acid batteries in the municipal
waste stream.
P5063a-0920
P5063pr-0923
17
SAFE DRIVING RULES
J
RIDING HAZARD
WARNING
• Prevent Injuries and Deaths
• Direct Adult Supervision Required
• Never Ride at Night.
• Keep Children Within Safe Riding Areas.
These areas must be:
- away from swimming pools and other
bodies of water to prevent drownings
- generally level to prevent tipovers
- away from steps, cars, steep inclines,
roads and alleys.
• Riding Rules
Make sure children know and follow
these rules for safe driving and riding.
- Always sit on the seat.
- Always wear shoes.
- Only 1 (one) rider at a time.
Teach Safety Rules to Children
While children can quickly develop the skill necessary to drive this
vehicle, it is important to remember that their judgment skills are
still very immature. Unsupervised driving by children can lead to
serious injury. Before children use this vehicle, an adult should
carefully evaluate the driving area as well as the children’s skill
level and ability to drive this vehicle safely. Children are not always
able to recognize or anticipate hazards, even when they have been
taught about them. There is no acceptable substitute for direct
adult supervision.
Teach appropriate safety rules to your child before allowing
operation of this vehicle. These rules should also be reviewed with
neighborhood children or other playmates who want to drive
this vehicle.
Riding Rules
Make sure children know and follow these rules for safe driving:
1. Always sit on the seat.
2. Always wear shoes.
3. Only 1 (one) rider at a time. A child who is not sitting on the seat
or who is standing on the vehicle could fall off, cause a tip-over
or block the driver’s view. A child could be seriously injured.
4. Do not allow any child to drive the vehicle in the street or near
moving (motorized) vehicles.
5. Do not allow any child to drive near bodies of water (such as
pools or creeks), obstructions (such as furniture, low tree limbs
or play equipment), or drop-offs (such as stairs or decks).
6. Do not allow any child to drive the vehicle in the dark.
A child could encounter unexpected obstacles and have an
accident. Operate the vehicle only in the daytime or a well-lit area.
7. Do not allow your child to drive on sloped or inclined surfaces.
Restrict your child’s driving to generally level ground ONLY!
8. Do not allow your child to drive down or across a steep slope.
- The vehicle may gain unsafe speed, even if the pedal is released
to stop.
- The vehicle may tilt and tip over.
- The wheels could lose traction, causing the vehicle to slip.
9. Do not allow your child to drive up steep inclines. The motor may
stop and the vehicle could roll backwards at an unsafe speed.
10. Never put anything near any moving parts. Rotating parts such
as motors, gear boxes and wheels can snag fingers, hair, etc.,
causing serious injury. Do not allow operation of the vehicle
when it is on its side or in an upside-down position.
11. Do not operate the vehicle near flammable vapors (gasoline,
paint thinner, acetone, liquid wax, etc.). The vehicle’s electrical
switches, like most electrical switches, emit an internal spark
when first turned on or turned off. The presence of flammable
liquids or vapors could cause an explosion or a fire. Keep all
flammable products in tightly sealed containers and away from
the vehicle.
12. Do not allow a child to operate the vehicle without direct
adult supervision. To prevent unsupervised use of the vehicle,
disconnect the motor harness from the battery when the vehicle
is not in use.
18
P5063pr-0923
P5063a-0920
K
VEHICLE OPERATION
IMPORTANT! Use this vehicle ONLY outdoors. Most interior
flooring can be damaged by riding this vehicle indoors.
Fisher-Price® will not be responsible for damage to the floor
if the vehicle is used indoors.
REVERSE FORWARD
• Press the FORWARD or REVERSE button on the floor of
the vehicle.
• Now, press the foot pedal. The vehicle drives forward or in
reverse at a maximum speed of 31/2 mph.
IMPORTANT! To prevent damaging the motors and gears,
teach your child to stop the vehicle before switching direction.
Never shift from forward to reverse, or from reverse to
forward, without stopping.
• Help your child practice steering to learn how far and how
quickly to turn the wheel.
VEHICLE CARE
L
• Check all screws, cap nuts and their protective coverings
regularly and tighten as required. Check plastic parts on a
regular basis for cracks or broken pieces.
• During snowy or rainy weather, the vehicle should be stored
inside or under a protective cover. Remember to charge the
battery at least once per month while your vehicle is not in
regular use.
• Avoid operating the vehicle in wet or snowy conditions, and do
not spray the vehicle with a hose. Do not wash the vehicle with
soap and water. Water or moisture in the motors or electrical
switches can cause them to corrode, and could cause switch or
motor failure.
• Avoid operating the vehicle on sand, loose dirt or gravel. Sand,
loose dirt or gravel in the motors or electrical switches can
cause them to jam, and could cause switch or motor failure.
• The vehicle can be wiped down with a soft, dry cloth. For a
shiny finish, you can wipe plastic parts with a non-wax furniture
polish applied to a soft-cloth. Do not use automotive wax. Do
not use soap and water or spray the vehicle with a hose.
• To ensure that your vehicle stays in good operating order, we
recommend that you periodically have your vehicle checked by a
Power Wheels® authorized service center. For the location of the
authorized service center nearest you, please visit us on-line at
www.powerwheels.com or call 1-800-348-0751.
• Your vehicle has a patented, electronic braking system that
automatically stops the vehicle when your child’s foot lifts from
the pedal.
• Make sure your child is comfortable with steering the vehicle
and automatically knows how to stop.
P5063a-0920
P5063pr-0923
19
M
BUMPER-TO-BUMPER* LIMITED WARRANTY
*One year limited warranty from the date of purchase on the Power Wheels® vehicle.
Six month limited warranty on the 6 volt battery.
For the original purchaser, this one year limited warranty covers the Power Wheels® ride-on vehicle (purchased from Power
Wheels®) against defects in materials and workmanship. The six month limited warranty applies only to the 6 volt battery included
by Power Wheels® with the original purchase of the vehicle.
This warranty covers normal use and does not cover the Power Wheels® vehicle or battery if damaged by unreasonable use,
neglect, accident, abuse, misuse, improper service or other causes not arising out of defects in materials or workmanship.
Evidence of any attempt at consumer repair will void this warranty. THIS WARRANTY DOES NOT COVER, AND IS INTENDED TO
EXCLUDE, ANY LIABILITY ON THE PART OF POWER WHEELS®, WHETHER UNDER THIS WARRANTY OR IMPLIED BY LAW FOR
ANY INDIRECT OR CONSEQUENTIAL DAMAGES FOR BREACH OF WARRANTY. SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION SO THIS LIMITATION MAY NOT APPLY TO YOU.
Should you need service or assistance with your vehicle during the warranty period, do not return the vehicle to the store. Power
Wheels® has provided a nationwide network of authorized service centers. If there is not an authorized service center in your area,
please visit us on-line at www.powerwheels.com or call Consumer Relations for information, 1-800-348-0751.
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.
PLEASE SAVE YOUR ORIGINAL SALES RECEIPT.
20
P5063pr-0923
P5063a-0920
PROBLEMS AND SOLUTIONS GUIDE
N
IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still
experience a problem, please contact Power Wheels® Consumer Relations, toll-free at 1-800-348-0751 between 9 AM - 7 PM (EST)
Monday through Friday and 11 AM - 5 PM (EST) Saturday. Or, contact your local Power Wheels® authorized service center. For the
location nearest you, please visit us on-line at www.powerwheels.com, or call 1-800-348-0751.
PROBLEM
Vehicle does not run
POSSIBLE CAUSE
Undercharged battery
SOLUTION
Charge the battery. A new battery should have been
charged for at least 18 hours before using the vehicle for
the first time. After first-time use, recharge the battery for
at least 14 hours after each use. Never charge the battery
longer than 30 hours.
Check all connectors. Make sure the battery connector is
tightly plugged into the charger connector, and that the
charger is plugged into the wall.
Make sure power flow to the wall outlet is “ON”.
P5063a-0920
Charger is not working
There is no sure way to tell if your charger is working unless
you have a volt meter. If you suspect there is a problem with
your charger, contact your local Power Wheels® authorized
service center. They can test your charger for you.
Tripped thermal fuse
The built-in thermal fuse may "trip" and shut down operation
of the vehicle if the vehicle is overloaded or the driving
conditions too severe. Once a fuse has "tripped", remove
your foot from the pedal and wait 25 seconds before
operating the vehicle again. To avoid repeated automatic
shutdowns, do not overload the vehicle by exceeding the
65 lb maximum weight capacity or by towing anything behind
the vehicle. Do not drive up hills or run into fixed objects,
which can cause the wheels to stop spinning while power
is still being supplied to the motors. If a thermal fuse
continually trips, contact your local Power Wheels®
authorized service center.
Loose wires or loose connectors
Check all wires and connectors. Make sure the battery
connector is tightly plugged into the motor harness connector
and that there are no loose wires around the motors.
Dead battery
If your battery is old or if you have not followed Battery
Care instructions, your battery may be dead. If you are
unsure whether or not the battery are dead, you can have
it tested at your local Power Wheels® authorized
service center.
Electrical switch damage
The electrical switches can become corroded due to
exposure to water or moisture, or can jam due to loose dirt,
sand or gravel. Contact your local Power Wheels® authorized
service center for diagnosis and repair.
Motor damage
Contact your local Power Wheels® authorized service center
for diagnosis and repair.
P5063pr-0923
21
PROBLEMS AND SOLUTIONS GUIDE
N
PROBLEM
Vehicle was running but
suddenly stopped
Short run time (Less than
1 - 3 hours per charge)
POSSIBLE CAUSE
SOLUTION
Loose wires or loose connectors
Check all wires and connectors. Make sure the battery
connector is tightly plugged into the motor harness connector, and that there are no loose wires around the motors.
Tripped thermal fuse
The built-in thermal fuse may "trip" and shut down operation
of the vehicle if the vehicle is overloaded or the driving
conditions too severe. Once a fuse has "tripped", remove
your foot from the pedal and wait 25 seconds before
opperating the vehicle again. To avoid repeated automatic
shutdowns, do not overload the vehicle by exceeding the
65 lb maximum weight capacity or by towing anything
behind the vehicle. Do not drive up hills or run into fixed
objects, which can cause the wheels to stop spinning while
power is still being supplied to the motors. If a thermal
fuse continually trips, contact your local Power Wheels®
authorized service center.
Undercharged battery
Charge the battery. A new battery should have been
charged for at least 18 hours before using the vehicle for
the first time. After first-time use, recharge the battery for
at least 14 hours after each use. Never charge the
battery longer than 30 hours.
Check all wires and connectors. Make sure the battery
connector is tightly plugged into the charger connector, and
that the charger is plugged into the wall.
Make sure power flow to the wall outlet is “ON”.
22
Overcharged battery
Do not charge the battery longer than 30 hours. If you
suspect that your battery is damaged as a result of
overcharging, contact your local Power Wheels® authorized
service center. They can test the battery for you.
Battery is old and will not
accept full charge
Even with proper care, a rechargeable battery does not
last forever. Average battery life is 1 to 3 years depending
on vehicle use and use conditions. Replace only with a
Power Wheels® 6 Volt battery with A-style connector and
built-in thermal fuse. Do not substitute parts.
Tripped thermal fuse
The built-in thermal fuse may "trip" and shut down operation
of the vehicle if the vehicle is overloaded or the driving
conditions too severe. Once a fuse has "tripped", remove
your foot from the pedal and wait 25 seconds before
opperating the vehicle again. To avoid repeated automatic
shutdowns, do not overload the vehicle by exceeding the
65 lb maximum weight capacity or by towing anything
behind the vehicle. Do not drive up hills or run into fixed
objects, which can cause the wheels to stop spinning while
power is still being supplied to the motors. If a thermal
fuse continually trips, contact your local Power Wheels®
authorized service center.
P5063pr-0923
P5063a-0920
PROBLEMS AND SOLUTIONS GUIDE
PROBLEM
Vehicle runs sluggishly
POSSIBLE CAUSE
Undercharged battery
N
SOLUTION
Charge the battery. A new battery should have been
charged for at least 18 hours before using the vehicle for
the first time. After first-time use, recharge the battery for
at least 14 hours after each use. Never charge the battery
longer than 30 hours.
Check all connectors. Make sure the battery connector
is tightly plugged into the charger connector, and that the
charger is plugged into the wall.
Make sure power flow to the wall outlet is “ON”.
Battery needs charging
Be sure to charge the battery after each use.
Battery is old and will not
accept full charge
Even with proper care, a rechargeable battery does not
last forever. Average battery life is 1 to 3 years depending
on vehicle use and use conditions. Replace only with a
Power Wheels® 6 Volt battery with A-style connector and built-in
thermal fuse. Do not substitute parts.
Vehicle is overloaded
Make sure you do not overload the vehicle by allowing
more than one rider at one time, exceeding the 65 lb.
maximum weight capacity, or by towing objects behind the
vehicle. If the vehicle is overloaded, the built-in thermal fuse in
the battery may "trip", and automatically shut down. Adjust the
driving conditions to prevent repeated automatic shutdowns.
Driving conditions are too stressful
Use only on generally level ground.
Loose wire or connector
Check all wires around the motors and all connectors to
make sure they are tight.
Motor or electrical switch damage
Contact your local Power Wheels® authorized service
center for diagnosis and repair.
Loose wire or connector
Check all wires around the motors and all connectors
to make sure they are tight.
“Dead Spot” on motor
Contact your local Power Wheels® authorized service
center for diagnosis and repair.
Damaged battery
Contact your local Power Wheels® authorized service
center for diagnosis and repair.
Child is switching between
FORWARD and REVERSE
without stopping
Teach your child to stop the vehicle before switching
direction.
Loud clacking or grinding
noise from a motor-gearbox
Broken gears
Contact your local Power Wheels® authorized service
center for diagnosis and repair.
Charger gets warm during use
It is normal for some chargers to get
warm during use and is not reason
for concern. Some chargers do not
get warm during use.
No action required.
Sometimes the vehicle doesn’t
run, but other times it does
When the foot pedal is pressed,
the vehicle won’t run without
a push
Battery’s thermal fuse constantly
"trips", but the vehicle is not
overloaded nor the driving
conditions too severe
Battery makes a sizzling or
gurgling noise when charging
It is normal for some batteries to
make noise and swell slightly while
charging and is not reason for concern.
If your charger does not get warm during
use, it does not mean that it is not working properly.
No action required.
If your battery does not make noise or swell slightly
during charging, it does not mean that it is
not accepting the charge.
If, after reviewing the Problems and Solutions Guide, the vehicle still fails to operate, please contact your nearest authorized service center.
P5063a-0920
P5063pr-0923
23
Before first-time use,
you must charge the battery
18 hours!
Charge the battery immediately after each use.
Charge the battery once a month, even if the vehicle
is not used or stored.
Do not return
your vehicle to the store!
We're a toll-free phone call away, and we can help.
If you are missing parts or need assistance, please call:
1-800-348-0751
8 am - 6 pm EST, Monday through Friday.
Or contact your local independently owned and operated
Power Wheels® Authorized Service Center.
For the location nearest you, visit us on-line at www.powerwheels.com.
Jeep® and the Jeep® grille design are registered trademarks of Chrysler LLC. Jeep® Wrangler and
its trade dress are used under license from Chrysler LLC.® Chrysler LLC 2008.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052 U.S.A.
©2008 Mattel, Inc. All Rights Reserved.
Fisher-Price and Power Wheels by Fisher-Price are U.S. trademarks of Mattel, Inc.
PRINTED IN MEXICO
P5063a-0920
PRINTED IN CHINA
73610a-0920
Download PDF