kbsi240d multiple kbvf kbwd kbwt app

kbsi240d multiple kbvf kbwd kbwt app
"The Right Control
for your Application"
KB ELECTRONICS, INC.
12095 NW 39th Street, Coral Springs, Florida 33065 USA
(954) 346-4900 FAX (954) 346-3377
SUBJECT: Warning: Do not connect the KBSI-240D Signal Isolator with multiple KBVF,
KBRG, KBMG, KBWD OR KBWT AC or DC DRIVES
Please note, if your application requires using multiples of the following AC or DC Drives, KBVF,
KBRG, KBMG, KBWD or KBWT, then each drive must have its own signal isolator. All KB motor
speed controls require the use of a signal isolator when being controlled by an external grounded
signal. The KBSI-240D signal isolator can be used successfully with any single control. It will provide
isolation between the grounded input signal and the AC or DC motor speed control.
The KBSI-240D signal isolator can be used with multiple, non-regenerative, DC Drives such as KBIC,
KBMM, KBMD and KBPC.
If you have an application that requires multiple PWM or regenerative speed controls to all follow one
input signal, you must use one signal isolator per control. Please call your Applications Engineer or
Regional Manager if you have any questions or need applications assistance.
Sincerely,
Richard Fritts
National Sales Manager
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement