Bryant | T2-PAC | Owner`s manual | Bryant T2-PAC Owner`s manual

T2--PHP, T2--PAC
Legacyt Series
Programmable Thermostat
Owner’s Manual
YOU WILL LOVE THIS THERMOSTAT.
You have the Legacyt Programmable thermostat. This unique device’s
state-- of-- the-- art technology makes it easier than ever for you to keep your home
comfortable.
Designed to be as smart – and smart-- looking – as any of the other electronics in
your home, your new thermostat offers programming options to fit your lifestyle –
not anybody else’s. Let this manual show you how easy it is to enjoy the newest
experience in home comfort.
Designed and Assembled in the U.S.A.
1
TABLE OF CONTENTS
BUTTON IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ON--SCREEN INDICATORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
QUICK START
Setting the time and day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting the temperatures for heating and cooling . . . . . . . . . . . . . . . . . . . . . . . . 9
Changing the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Understanding Touch ‘N’ Got feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
PROGRAMMING THE THERMOSTAT
Programming the Touch ‘N’ Go feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the home temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the away temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the sleep temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the temperature time periods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Assigning time periods to temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
16
17
18
19
25
OPERATING THE THERMOSTAT
Using Touch ‘N’ Go buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To make a temporary change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To hold it at home, away or sleep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the thermostat to turn the heating and cooling system off . . . . . . . . . . . .
Using the fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using emergency heat (heat pump systems only) . . . . . . . . . . . . . . . . . . . . . . .
Changing the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29
29
30
31
32
33
34
ADVANCED PROGRAMMING OPTIONS
Advanced programming display codes chart . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Changing from Fahrenheit to Celsius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
2
TABLE OF CONTENTS
Turning off the continuous backlighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Keypad lockout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Unlocking the keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing from programmable to nonprogrammable . . . . . . . . . . . . . . . . . . . .
Changing the number of programming periods . . . . . . . . . . . . . . . . . . . . . . . . .
39
41
42
43
45
SPECIAL FEATURES
Auto changeover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Smart Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
WHAT IF . . .
The battery icon is displayed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
“Aux heat on” is displayed (heat pump systems only) . . . . . . . . . . . . . . . . . . .
“Em heat” is displayed (heat pump systems only) . . . . . . . . . . . . . . . . . . . . . .
There is a power outage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
You get a system error message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
47
47
47
48
48
COMMON TERMS AND WHERE TO FIND THEM
Auto changeover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Auxiliary heat (heat pump systems only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Backlighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Emergency heat (heat pump systems only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Override . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Smart Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Temporary hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Time period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Touch ‘N’ Got . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
49
49
49
50
50
50
50
50
51
51
51
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
3
BUTTON IDENTIFICATION
off
Em
heat
c
mode
F
C
aux
actual temp
heat
on
temporory
hold
fan
AM
auto start
PM
at
fan
on
b
run
hold
d
cool
on2
e
all days
weekdays
weekends
f
a
home
fan
away
done
sleep
g
push and hold to set
set
schedule
days
period start time
d/h/m
set
clock
h
i
m
k
l
4
j
BUTTON IDENTIFICATION
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
m.
FAN
Selects whether the fan operates continuously (on) or
only when needed for heating or cooling (auto)
RUN/HOLD
Holds the currently selected temperature or runs the
scheduled program
MODE
Selects whether thermostat is set for heating,
cooling, emergency heat (heatpump system only),
auto (heat and cool as needed), or off
UP
Increases the temperature or adjusts the screen
selection up when setting advanced programming
features
DOWN
Decreases the temperature or adjusts the screen
selection down when setting advanced programming
features
DONE
Saves settings when completing a set-- up or
programming step
SLEEP
Activates heating and cooling settings for the sleep
program period
AWAY
Activates heating and cooling settings for the away
program period
HOME
Activates heating and cooling settings for the home
program period
D/H/M SET CLOCK Activates clock set mode
START TIME
Activates the programming menu, displaying the
four period start times
PERIOD
Activates the programming menu, displaying the
four programming time periods
DAYS
Activates the programming menu, displaying three
options – all days, weekdays and weekends
5
ON--SCREEN INDICATORS
off
Em
heat
6
5
aux
actual temp
heat
on
temporory
hold
fan
AM
auto start
PM
at
fan
on
4
3
2
1
19
18
7
F
C
17
16
6
15
8
9
cool
on2
all days
weekdays
weekends
10
11
12
13
14
ON--SCREEN INDICATORS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Clock
Fan mode – on or auto
Selected heating set point; “on” indicates system is in heating mode
System is in auxiliary (supplemental) mode
Current temperature
Thermostat mode is either off or using emergency heat
Fahrenheit
Keypad is locked (no padlock means unlocked)
Celsius
Battery strength indicator
Selected cooling set point; “on” indicates system is in cooling mode
Second stage of cooling is active for 2 speed thermostat models
Day of the week for programming mode
System is using sleep settings
AM or PM indicator for current time
System is using away settings
System is in hold
System is in temporary hold
System is using home settings
7
QUICK START
Setting the time and day
You must set the time and day before you can use any of the thermostat’s
programming features.
1. Open the door.
2. Press the d/h/m button. It’s on the lower right, under the
display screen. The day of the week will flash on the display.
3. Press the up or down button, located to the right of the
display, to change the day. Stop on the correct day.
4. Press the d/h/m button again and the hour will flash on
the display.
5. Press the up or down button to change the hour. Stop on
the correct number.
6. Press the d/h/m button again and minutes will flash on the display.
7. Press the up or down button to change the minutes. Stop on the correct
minute.
8. Press the done button or close the door.
8
QUICK START
Setting the temperatures for heating and cooling
Your thermostat is installed with pre-- set heating and cooling temperature settings.
You can use these or change them so your home is as warm or as cool as you’d like
it to be. These steps will hold the temperature where you set it. For the temperature
to change automatically according to your lifestyle needs – whether you’re home,
away or asleep – you’ll need to follow the Touch ‘N’ Go instructions on pages 13 –
19.
1. Open the door.
2. Press the up or down button located on the right side of
the display. You will see the preset temperature settings
for heating and cooling. The word heat will flash.
3. Press the up or down button to change the heat setting.
Stop on the correct setting.
4. Press the hold/run button.
9
QUICK START
5. Press the mode button located on the left side of the display once. You will see the preset temperature setting for
cooling appear on the right side of the display.
6. Press the up or down button. The word cool will flash.
7. Continue pressing the up or down button to change the
cool setting. Stop at the desired cooling setting.
8. Press the hold/run button located on the left side of the
display. This holds the thermostat at that setting.
9. Press the done button.
10. Close the door.
10
QUICK START
Changing the temperature
There are times when you want to change the temperature.
Here’s how.
1. Open the door.
2. Press the up or down buttons on the right side until you
reach the desired temperature setting. This creates a “temporary hold” until the next pre-- set time period. You will
see temporary hold on the display. (To switch from the
cooling temperature to the heating temperature – or vice
versa – press the mode button on the left until the word
heat or cool is flashing.)
3. To maintain that temperature setting so it doesn’t change
during the next pre-- set time period, press the hold/run
button on the left side. The display will show hold. The
temperature will stay at the setting you selected until you
release the hold.
4. To return the temperature to the pre-- set level for that time
period, press hold/run. This releases the hold and the temperature will return to its programmed level.
5. Close the door.
11
QUICK START
Understanding Touch ‘N’ Go feature
The unique Touch ‘N’ Go feature on your thermostat is a revolutionary tool that lets
you use a simpler programming option – literally, touch and go – to help you get
the maximum comfort control from the entire comfort system.
With the touch of one Touch ‘N’ Go button – home, away or sleep – you can
tell your thermostat where you’ll be. To keep the home at that comfort level
indefinitely, you add one more button – hold/run – and you’re set. It’s the ideal
choice for somebody whose schedule varies from day to day or doesn’t fit into the
two or four predictable time periods allowed by the thermostat.
At the same time, these three comfort options – home, away and sleep – are
connected to the thermostat’s full-- level programming power so that you get the
home comfort you desire exactly when you want it.
The three Touch ‘N’ Go buttons are preset at the factory for typical heating and
cooling temperature settings and assigned to specific time periods. You can change
these temperature settings and the hours you want to use them easily. Learn how to
do that and discover how useful this device is as you read through this manual.
12
PROGRAMMING THE THERMOSTAT
Programming the Touch ‘N’ Go feature
The Touch ‘N’ Go feature on your thermostat involves the home, away and sleep
buttons immediately under the display. They are used for two programming
options. One is more sophisticated than the other.
The simpler programming option requires you to either accept the preset
temperature settings for when you are home, away or asleep, or to set your own
Touch ‘N’ Go heating and cooling temperature settings. Either way, your home,
away and sleep settings are automatically linked to one of four time periods that are
also preset (and changeable) on the thermostat.
You can override those preset time periods and their relationship to your home,
away and sleep buttons by pressing one of those three buttons at any time. This
will let you create a “temporary hold” at that comfort level until the next
programming period.
You can also hold the thermostat at your home, away or sleep temperatures by
pressing one of those three buttons and then pressing the hold button.
This approach is popular with people who don’t follow the same routine every day.
And while you need to remember to push one of those three buttons when you
leave, come home, or go to bed, doing that is easier for some than manually
re-- setting the temperature several times a day.
13
PROGRAMMING THE THERMOSTAT
The more sophisticated programming option works well with people who tend to
follow a more predictable routine and who also want to get the most from this
thermostat’s potential. For both programming options, you must set-- up your Touch
‘N’ Go heating and cooling temperatures in order to use the thermostat’s expanded
programming options.
Here are the temperature settings that are pre-- programmed for your home, away
and sleep periods.
Touch ‘N’ Go Option
Heat
Cool
Home
68
74
Away
60
85
Sleep
66
78
14
PROGRAMMING THE THERMOSTAT
Use this blank grid to determine how warm or cool you want your home to be when
you’re home, away or asleep. You’ll assign time periods to those temperatures later.
Touch ‘N’ Go Option
Heat
Cool
Home
Away
Sleep
15
PROGRAMMING THE THERMOSTAT
Setting the home temperature
1. Open the door.
2. Press the home button located under the display on the
left. You will see a triangle icon (B) above the home button. This icon will always tell you whether you’re in the
home, away or sleep setting.
3. You will see the heating and cooling temperatures that
were set at the factory. To use these, just close the door.
4. To change the factory settings press the home button. You
will see the word heat flashing on the screen.
5. Press the up or down button until you reach the desired
temperature setting.
6. Press and hold the home button for about three seconds.
The set temperature will flash, indicating that it saved
your settings.
7. To change the cooling temperature setting, press the
mode button repeatedly until you see the word cool flashing on the screen.
8. Press the up or down button on the right side of the display until you reach the desired temperature setting.
9. Press and hold the home button for about three seconds. The set temperature will flash, indicating that it saved your settings.
16
PROGRAMMING THE THERMOSTAT
Setting the away temperature
1. Press the away button located under the display in the center. You will see a triangle icon (B ) above the away button.
2. You will see the heating and cooling temperatures that
were set at the factory. To use these, just close the door.
3. To change the factory settings, press the away button. You
will see the word heat flashing on the screen.
4. Press the up or down button on the right side of the display until you reach the correct temperature setting.
5. Press and hold the away button for about three seconds.
The set temperature will flash, indicating that it saved your
settings.
6. To change the cooling temperature setting, press the mode
button until you will see the word cool flashing on the
screen.
7. Press the up or down button until you reach the desired temperature setting.
8. Press and hold the away button for about three seconds. The set temperature will flash, indicating that it saved your settings.
17
PROGRAMMING THE THERMOSTAT
Setting the sleep temperature
1. Press the sleep button located under the display in the
center. You will see a triangle icon (B ) above the sleep
button.
2. You will see the heating and cooling temperatures that were
set at the factory. To use these, just close the door.
3. To change the factory settings, press the sleep button. You
will see the word heat flashing on the screen.
4. Press the up or down button on the right side of the display until you reach the desired temperature setting.
5. Press and hold the sleep button for about three seconds.
The set temperature will flash, indicating that it saved your
settings.
6. To change the cooling temperature setting, press the mode
button until you see the word cool flashing on the screen.
18
PROGRAMMING THE THERMOSTAT
7. Press the up or down button until you reach the desired
temperature setting.
8. Press and hold the sleep button for about three seconds.
The set temperature will flash, indicating that it saved your
settings.
9. Close the door.
Changing the temperature time periods
After you have set your three Touch ‘N’ Go buttons with temperature settings for
when you’re away, home and asleep, you can program the time of day you want to
use for those temperature settings.
The thermostat has four time ranges called periods. They are identified on the
display as P1, P2, P3 and P4.
With four time period options, you have a great deal of schedule and temperature
flexibility. For example, in a household where nobody is home during the day, the
users might use P1 for the morning before they leave for work, P2 for the hours
they are at work, P3 for the period when they are home in the evening, and P4 when
they are sleeping.
In situations where somebody is home most of the day, P1, P2 and P3 can all be
assigned the same “home” temperatures, while P4 is reserved for the sleeping
hours. (To learn how to reduce the number of time periods from four to two, see
page 22.)
19
PROGRAMMING THE THERMOSTAT
The thermostat has preset periods (see below), but you can change these to fit your
lifestyle.
Period
Preset Hours
P1
6:00 AM to 8:00 AM
P2
8:00 AM to 5:00 PM
P3
5:00 PM to 10:00 PM
P4
10:00 PM to 6:00 AM
What time blocks work for you? Write them in here and refer to this as you
make the changes on the thermostat.
Period
Your Hours
P1
P2
P3
P4
20
PROGRAMMING THE THERMOSTAT
Here’s how to change the factory-- set time periods.
1. Open the door.
2. Press the days button at the bottom of the thermostat. You
will see all days, weekdays and weekends flashing on
the display. You will be changing the time periods according to the days of the week. All days is used when the
household’s weekday and weekend schedules are the
same.
3. You must select one of these three timeframe options – all
days, weekdays or weekends – by pressing the up or
down button located to the right of the display. You may
also make your selection by pressing the days button
again. (Select all days if your weekday and weekend
schedules are the same.)
4. When you have selected one of the three options (all days,
weekdays, weekends), press the period button at the
bottom of the thermostat. You will see P and a flashing 1
on the screen. This is period 1 (P1), which begins at 6:00
AM.
5. To change the hours in P1, press the start time button at
the bottom of the screen.
21
PROGRAMMING THE THERMOSTAT
6. You will see the hours in 6:00 AM flashing on the screen. Press the up or
down button and stop on the desired time.
7. To change the minutes, press the start time button on the bottom of the
screen again. You will see the minutes in 6:00 AM flashing on the screen.
Press the up or down button and stop on the desired time.
The “stop time” for period 1 (P1) is also the “start time” for period 2 (P2).
To change the stop time for P1 – which means you are also changing the
start time for P2 – use the instructions in the next step to change the start
time for period 2.
8. To change the start time for period 2 (P2), press the period
button at the bottom of the screen twice. This displays the
information for period 2, with P2 flashing on the display.
9. You will see the hours in 8:00 AM flashing on the screen.
Press the up or down button and stop on the desired time.
22
PROGRAMMING THE THERMOSTAT
10. To change the minutes, press the start time button on the bottom of the
screen again. You will see the minutes in 8:00 AM flashing on the screen.
Press the up or down button and stop on the desired time.
11. To change the start time for period 3 (P3), press the period button at the
bottom of the screen three times. This displays the information for period 3,
with P3 flashing on the display.
12. You will see the hours in 5:00 PM flashing on the screen. Press the up or
down button and stop on the desired time.
13. To change the minutes, press the start time button on the bottom of the
screen again. You will see the minutes in 5:00 PM flashing on the screen.
Press the up or down button and stop on the desired time.
14. To change the start time for period 4 (P4), press the period button at the
bottom of the screen repeatedly. This displays the information for period 4,
with P4 flashing on the display.
15. You will see the hours in 10:00 PM flashing on the screen. Press the up or
down button and stop on the desired time.
16. To change the minutes, press the start time button on the bottom of the
screen again. You will see the minutes in 10:00 PM flashing on the screen.
Press the up or down button and stop on the desired time.
23
PROGRAMMING THE THERMOSTAT
17. If you did not select all days when you started this process, repeat all the
steps for your remaining timeframe choice – weekdays or weekends.
18. To confirm that the thermostat has accepted your changes, cycle through the
four time periods by pressing days, selecting your time frame – all days,
weekdays, or weekends – and then pressing the period button to see the
hours assigned for each start time. Each time you press period, you will
advance to the next start time.
19. Close the door.
24
PROGRAMMING THE THERMOSTAT
Assigning time periods to temperatures
To get the most from your thermostat’s programming features, you will want to take
the remaining steps that will link your four schedule time periods (P1, P2, P3 and
P4) to the heating and cooling temperatures you set with the Touch ‘N’ Go buttons
– home, away and sleep.
Taking these final steps will be easier if you complete the grid below before
programming the thermostat. It will help you decide how you want to assign the
comfort temperatures you’ve selected for home, away and sleep to the time periods
you’ve established. The completed grid will help you keep track of your
information as you work with the thermostat.
Here’s an example of how this would look using the factory-- set periods and Touch
‘N’ Go options.
Pre---set Period
Start Time
Period Number
Pre---set
Touch ‘N’ Go Option
for Each Period
6:00 AM
1
Home
8:00 AM
2
Away
5:00 PM
3
Home
10:00 PM
4
Sleep
25
PROGRAMMING THE THERMOSTAT
Complete this schedule according to daily routine and use it as you follow the
instructions below.
Your Period
Start Time
Period Number
Your Touch ‘N’ Go
Option for
Each Period
1
2
3
4
Here’s how to connect your four time periods with the three comfort ranges – home,
away and sleep.
1. Open the door.
2. Press the days button at the bottom of the thermostat.
You will see all days, weekdays and weekends flashing
on the display.
26
PROGRAMMING THE THERMOSTAT
3. Select one of these three options by pressing the up or
down button located to the right of the display. You may
also make your selection by pressing the days button
again. Select all days if your weekday schedule is the
same as your weekend schedule.
4. When you have selected one of the three options (all days,
weekdays, weekends), press the period button at the
bottom of the thermostat. P1 will flash on the display.
5. Press the Touch ‘N’ Go button – home, away or sleep –
you want to use during period 1 (P1) from the row of buttons just below the display. You will see the triangle icon
(B) above the button selected. This tells the thermostat
whether you are home, away, or asleep during P1. The
thermostat will use the heating and cooling temperature
settings you’ve selected for that Touch ‘N’ Go button. For
example, if your heating temperature setting for home is
72 degrees, the thermostat will keep the heat at 72 during
P1.
6. Press the period button twice. P2 will flash on the display.
27
PROGRAMMING THE THERMOSTAT
Press home, away or sleep.
Press the period button twice. P3 will flash on the display.
Press home, away or sleep.
Press the period button twice. P4 will flash on the display.
Press home, away or sleep.
If you did not select all days when you started this process, then repeat all
the steps for your remaining timeframe choice – weekdays or weekends.
13. To confirm that the thermostat has accepted your changes, cycle through the
four time periods by pressing days, selecting your time frame – all days,
weekdays, or weekends – and then pressing the period button to see the
Touch ‘N’ Go option assigned for each start time. Each time you press period, you will advance to the next start time.
14. Press done or close the door.
7.
8.
9.
10.
11.
12.
28
OPERATING THE THERMOSTAT
Using Touch ‘N’ Go buttons
Once you have set the temperatures and time periods that correspond with your
three Touch ‘N’ Go comfort buttons (see Programming the Touch ‘N’ Go feature,
page 13, and Assigning time periods to temperatures, page 26), you won’t need to
use your Touch ‘N’ Go buttons unless you want to make a temporary change. For
example, if you go to bed earlier than usual, pressing the sleep button will lower
the temperature sooner than scheduled. If you go to bed later than usual, pressing
the home button will keep the home warmer past your usual bedtime but you’ll
need to press sleep before you go to bed.
To make a temporary change
1. Open the door.
2. Press the home, away or sleep button that you want. You will see the
words temporary hold on the display and the triangle icon (B) over the
button you’ve selected. The system will change to the temperature setting
programmed for that lifestyle period. It will maintain that temperature setting until the start of the next programmed cycle.
29
OPERATING THE THERMOSTAT
3. To return to the originally programmed lifestyle period, press the appropriate home, away or sleep button. The system will return to that time period and the words temporary hold will disappear.
4. Close the door.
To hold it at home, away or sleep
There might be situations when you want to override the programming and hold the
home’s temperature at one of the three home, away or sleep comfort levels. This is
useful when you’re going on vacation or traveling, or when you’re home
unexpectedly. Here’s how to prevent the thermostat from changing temperatures
when it reaches the next programming time period.
1. Open the door.
2. Press the desired button under the display – home, away
or sleep.
3. Press the hold/run button on the left side. You will see the
word hold on the display.
30
OPERATING THE THERMOSTAT
4. To return to your original programming schedule, press the
hold/run button. The word hold will disappear.
5. Close the door.
Using the thermostat to turn the heating and cooling system off
Here’s how to use the thermostat to turn the heating and cooling system off.
1. Open the door.
2. Press the mode button on the top left repeatedly until the
display shows off in the upper left.
3. Close the door.
31
OPERATING THE THERMOSTAT
Using the fan
The fan function helps distribute warmth or cooling throughout your home for a
more even temperature in all spaces. The thermostat is automatically set so that the
fan runs only during your heating and cooling cycles (auto mode). However, you
can adjust the settings so that the fan runs continuously, even between cycles or
when the system is turned off.
1. Open the door.
2. Press the fan button on the left side. You will see fan on in the lower left
corner of the display.
3. To return the fan to auto mode, press the fan button again.
You will see fan auto on the display.
4. Close the door.
32
OPERATING THE THERMOSTAT
Using emergency heat (heat pump systems only)
Emergency heat is useful when the automatic auxiliary heat system can’t keep up
with demand. (Systems with heat pumps use “auxiliary heat” when it’s too cold
outside for the heat pump to heat the house without help. The display indicator for
this is aux heat on.)
If the heat pump compressor that works with auxiliary heat fails, or if the heat pump
isn’t working at all, you can turn on the emergency heat for that extra help. (You’ll
know there’s a problem if the house can’t seem to get warm when it’s very cold
outside.) You want to avoid using emergency heat, though, because it’s the most
expensive option. And, of course, if you suspect a problem with your heat pump,
call your heating and cooling dealer immediately.
Here’s how to set your thermostat to use emergency heat.
1. Open the door.
2. Press the mode button three times. You will see Em heat in the upper left
of the display.
3. Close the door.
33
OPERATING THE THERMOSTAT
Changing the batteries
Your thermostat is probably powered by the HVAC equipment, but if it isn’t, it’s
battery powered. You can tell if it’s battery powered by checking in Advanced
Programming Options. (See page 37.) If there’s no lighting until you touch a button,
it’s battery powered. When the thermostat uses electricity, the batteries (if installed)
take over if the electricity goes out. This allows you to monitor the indoor
temperature when there’s no electricity.
When powered by batteries, your thermostat’s two AA batteries should last about
one year. When your batteries have lost about one-- third of their power, a battery
icon shows up on the display in the upper right corner. Two-- thirds of it will be
black. As the batteries get weaker, the icon goes down to one bar and then none.
When the battery icon is less than full, you will first see the loss of backlight
function. When the batteries are completely dead, you won’t be able to use the
thermostat.
34
OPERATING THE THERMOSTAT
We recommend that you replace the batteries at the one bar level
with two AA alkaline batteries. They’re in the back of the
thermostat, so you’ll have to remove it from the wall. Here’s how.
1. Locate the latch at the top of the thermostat. It’s at the center of the top rim.
2. Press it down. This will disconnect the thermostat from the
top of the wall plate.
3. Remove the thermostat from the wall bracket completely by bringing it slightly toward you and lifting it
up and off the lip on the lower edge of the wall bracket.
4. Set the thermostat face down on a flat surface. You will
see the batteries in the lower right corner.
5. Remove and discard the old batteries.
35
OPERATING THE THERMOSTAT
6. Install new batteries by matching the “plus” and “minus” ends of the batteries with the “plus” and “minus” indicators you’ll see outside the two white
battery shapes in the space where the batteries sit.
7. Snap the batteries into place.
8. Put the thermostat back on the wall bracket by lining up the two slots on
the bottom edge of the back of the thermostat with the two lips on the wall
bracket. You will feel the slots fit over the lips.
9. With the bottom of the thermostat attached to the bottom of the wall bracket, bring the thermostat back to the wall. Line up the latch at the top of the
thermostat with the corresponding lip on the wall bracket.
10. Lightly push the thermostat toward the wall. When the latch and lip are
lined up properly, you will hear the thermostat snap into place.
36
ADVANCED PROGRAMMING OPTIONS
Advanced programming display codes chart
You can customize several features of your thermostat. This chart shows which
features you can change and the codes associated with them. The codes will be
shown on the display when you follow the instructions.
Feature
Configuration Code
Change Indication
Fahrenheit to Celsius
U1
F or C
backlighting
U2*
On or Of
keypad lockout
U3
padlock
programmable or nonprogrammable
U4
P or nP
number of program
periods
U5
4 or 2
* Not available when batteries are installed.
37
ADVANCED PROGRAMMING OPTIONS
Changing from Fahrenheit to Celsius
Your thermostat is preset to display the temperature in degrees Fahrenheit. You can
change this to Celsius.
1. Open the door.
2. Press and hold the home and sleep buttons under the display simultaneously for about three seconds.
3. Press the mode button on the left to change it from F
(Fahrenheit) to C (Celsius).
4. Press the done button on the lower right.
5. Close the door.
38
ADVANCED PROGRAMMING OPTIONS
Turning off the continuous backlighting
If your thermostat is not powered by the equipment and is instead battery powered,
the display will light up for a few seconds after you press any button. This is
backlighting. It will go dark after a few seconds.
If the thermostat is powered by electricity, there is always a low level amount of
backlighting until you press any button, which increases the lighting temporarily.
Here’s how to turn off the constant low level backlight when your thermostat is
powered by electricity.
1. Open the door.
2. Press and hold the home and sleep buttons under the display simultaneously for about three seconds.
3. Press the up button at the top right of the display. You
will see U2 and On. (If you don’t, continue to press the
up button, cycling through the options until you get to
U2 and On.)
4. Press the mode button on the left to change it to Of.
39
ADVANCED PROGRAMMING OPTIONS
5. Press the done button on the right.
6. Close the door.
40
ADVANCED PROGRAMMING OPTIONS
Keypad lockout
The keypad lockout feature lets you “lock” the thermostat so nobody can change
the temperature – or make any other changes – by pressing buttons. Keypad
lockout is not activated when the thermostat is installed. Here’s how to activate it.
1. Open the door.
2. Press and hold the home and sleep buttons under the
display simultaneously for about three seconds.
3. Press the up button at the top right of the display. You will
see U3. (If you don’t, continue to press the mode button,
cycling through the options until you get to U3.)
4. Press the mode button on the left. You will see U3 and
On beneath a padlock icon. This indicates that the keypad
is now locked.
5. Press the done button on the right.
6. Close the door.
41
ADVANCED PROGRAMMING OPTIONS
Unlocking the keypad
Here’s how to temporarily unlock the keypad.
1. Open the door.
2. Press and hold the up and down buttons on the right simultaneously for
about five seconds.
3. The padlock icon will disappear. This means the keypad
is unlocked and can be used. The keypad will revert back
to the locked state after you’ve stopped pushing buttons for
two minutes.
4. Close the door.
42
ADVANCED PROGRAMMING OPTIONS
Changing from programmable to nonprogrammable
It is possible to convert your thermostat’s operation from programmable to
nonprogrammable. This eliminates its advanced features. When switching to the
nonprogrammable format, you lose the programming, hold, days of the week on the
display, and Smart Recovery features. Switching to nonprogrammable also means
you’ll give up some of the thermostat’s energy saving features. The time of day will
still show on the display and you will be able to increase or decrease the
temperature settings manually. Here’s how to switch to nonprogrammable.
1. Open the door.
2. Press and hold the home and sleep buttons under the
display simultaneously for about three seconds.
3. Press the up button at the top right of the display. You will
see U4 and P (for programmable). (If you don’t, continue
to press the up button, cycling through the options until
you get to U4 and P.)
43
ADVANCED PROGRAMMING OPTIONS
4. Press the mode button on the left to change it to nP (for
nonprogrammable).
5. Press the done button on the right.
6. Close the door.
44
ADVANCED PROGRAMMING OPTIONS
Changing the number of programming periods
Your thermostat is preset with four time periods (P1, P2, P3, P4). You can change
this to two. Here’s how to change the number of periods in the day.
1. Open the door.
2. Press and hold the home and sleep buttons under the display simultaneously for about three seconds.
3. Press the up button at the top right of the display repeatedly. You will see U5 and 4. (If you don’t, continue
to press the up button, cycling through the options until
you get to U5 and 4.)
4. Press the mode button on the left to change it from 4 to 2.
5. Press the done button on the right.
6. Close the door.
45
SPECIAL FEATURES
Auto Changeover
The thermostat displays one of five modes: heat, cool, Em heat (heat pump version
only), heat cool, and off. When the mode selection is for both heating and cooling,
the thermostat is in auto changeover mode. This allows the system to switch from
heating to cooling – or from cooling to heating – to maintain the temperatures
you’ve programmed. It does this automatically.
Smart Recovery
The Smart Recovery feature transitions your home from one temperature period
(P1, P2, P3, P4) to the next so that the your home’s temperature matches the
temperature setting at the start of each time period. This means, for example, that if
your sleep period temperature setting is lower than the period that precedes it, the
thermostat will start cooling down the home before the beginning of the scheduled
sleep period.
It does this at an energy-- efficient rate. This not only helps make your home as
comfortable as possible, it also makes your thermostat more cost effective. Call
your dealer to adjust Smart Recovery settings.
46
WHAT IF . . .
The battery icon is displayed
The battery icon appears on the display only when the battery starts to lose power.
Replace it when one-- third of the icon is black.
If you wait until the icon is just a silhouette with no black bars, the thermostat won’t
have the power to function correctly. Replace the battery to restore thermostat
functions.
“Aux heat on” is displayed (heat pump systems only)
Aux heat on is auxiliary heat. It applies only to the heat pump version. If it is on,
you will see aux heat on. When it is displayed, it means the system has determined
that it’s too cold outside for your heat pump to heat the house without help, so it’s
getting help from the electric heaters. This happens automatically.
“Em heat” is displayed (heat pump systems only)
Em heat is the display term for emergency heat and applies only to the heat pump
version. When emergency heat has been turned on, Em heat is displayed when you
press the mode button. You have to turn on emergency heat manually – it doesn’t
happen automatically – so if you see Em heat on the display, it means somebody
has turned it on.
47
WHAT IF . . .
There is a power outage
If you lose electricity and have batteries installed, the thermostat will continue to
display the status because it has a battery backup power source. This means that
even though your heating and cooling system doesn’t work, you will still be able to
monitor your home’s temperature. In addition, you won’t have to reprogram the
thermostat because your settings are retained even if the battery dies. The display
will continue to show the time for 8 hours while there is no electricity.
You get a system error message
Here are the possible system error messages and what they mean:
-The room air sensor reports that the room air temperature is above 150° or
below - 50°.
E4
This means the memory has failed and the thermostat will return to the
factory settings. Call your heating and cooling dealer.
48
COMMON TERMS AND WHERE TO FIND THEM
Auto changeover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 46
This feature automatically switches your system from heating to cooling – and from
cooling to heating – whenever necessary when the thermostat is set in auto mode.
Auxiliary heat (heat pump systems only) . . . . . . . . . . . . . . . . . . . . page 33
Most heat pump systems can’t heat a home sufficiently when it gets very cold
outside so they use a supplemental heating source called auxiliary heat. The system
knows when to use this help and does so automatically. If it’s using auxiliary heat,
the display will show aux heat on. You have no control over the auxiliary heat
function.
Backlighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 39
Backlighting illuminates your display. When the thermostat is powered by
electricity, the backlight is on constantly at a dim level that brightens when you
push a button. With battery powered thermostats, the backlight is off until you press
a button.
49
COMMON TERMS AND WHERE TO FIND THEM
Emergency heat (heat pump systems only) . . . . . . . . . . . . . . . . . . page 33
You can manually set the thermostat to use emergency heat but it is the most
expensive option. If it’s using emergency heat, the display will show Em heat when
you press the mode button.
Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 30
This function holds the current set temperature.
Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 46
This term refers to the type of operation your system is performing. The options are
heat, cool, emergency heat, heat cool, and off.
Override . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 30
This happens when you temporarily disregard the thermostat’s programmed
temperature settings and schedules by using the temporary hold or hold options.
Smart Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 46
This feature allows your system to shift from one temperature period to the next
scheduled period at an energy-- efficient rate.
50
COMMON TERMS AND WHERE TO FIND THEM
Temporary hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 29
This function lets you temporarily maintain your temperature settings. The system
will return to the scheduled settings during the next time period.
Time period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 19
The thermostat features four time periods. These blocks of time are linked to
temperatures you set according to how warm or cool you want the house during
those time periods. The time periods are also linked to your Touch ‘N’ Got settings
of home, away and sleep.
Touch ‘N’ Go . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 12
The three Touch ‘N’ Go buttons – home, away and sleep – let you change
programmed time periods with the touch of a button. They are particularly useful
for somebody who doesn’t want to take advantage of the thermostat’s full
programming capability or somebody whose schedule varies from day to day.
51
NOTES PAGE
52
THERMOSTAT LIMITED WARRANTY
Bryant Heating & Cooling Systems
Limited Warranty for Thermostats
FOR WARRANTY SERVICE OR REPAIR:
Contact the installer or a Bryant dealer. You may be able to find the installer’s name on the
equipment or in your Owner’s Packet. You can also find a Bryant dealer online at
www.bryant.com
For help, contact: Bryant Heating & Cooling Systems, Consumer Relations, P.O. Box 4808,
Syracuse, New York 13221, Phone 1--800--428--4326
PRODUCT REGISTRATION: You can register your product online at www.bryant.com.
Model Number_______________________
Serial Number_______________________
Date of Installation____________________
Installed by_________________________
Name of Owner_______________________
Address of Installation_________________
Bryant Heating & Cooling Systems (hereinafter “Company”) warrants this product against
failure due to defect in materials or workmanship under normal use and maintenance as
follows. All warranty periods begin on the date of original installation. If a part fails due to
defect during the applicable warranty period Company will provide a new or remanufactured
part, at Company’s option, to replace the failed defective part at no charge for the part.
Alternatively, and at its option, the Company will provide a credit in the amount of the then
factory selling price for a new equivalent part toward the retail purchase price of a new
Company product. Except as otherwise stated herein, those are Company’s exclusive
obligations under this warranty for a product failure. This limited warranty is subject to all
provisions, conditions, limitations and exclusions listed below and on the reverse (if any) of
this document.
53
THERMOSTAT LIMITED WARRANTY
OWNER--OCCUPIED, RESIDENTIAL APPLICATIONS
This warranty is to the original purchasing owner and is transferable only to the extent and as
stated in the Warranty Conditions and below. The warranty period in years, depending on the
part and the claimant, is as shown in the chart below.
Limited Warranty (Years)
Original Owner
Subsequent Owner
10* (or 5)
5
Product
T6, T2, T1 Thermostats***
*
If properly registered within 90 days, otherwise 5 years (except in California and Quebec
and other jurisdictions that prohibit warranty benefits conditioned on registration, registration is not required to obtain longer warranty periods). See Warranty Conditions below.
***Applies only to Thermostats. Active electronic finished good accessories, such as the optional ExP module, have different warranty terms. See product for details.
OTHER RESIDENTIAL APPLICATIONS (Apartments, Rental Properties, etc.)
The warranty period is five (5) years. The warranty is to the original owner only and is not
transferable.
OTHER APPLICATIONS
The warranty is one (1) year on all such applications. The warranty is to the original owner
only and is not transferable.
LEGAL REMEDIES: The owner must notify the Company in writing, by certified or
registered letter to Bryant Heating & Cooling Systems, Warranty Claims, P.O. Box 4808,
Syracuse, New York 13221, of any defect or complaint with the product, stating the defect or
complaint and a specific request for repair, replacement, or other correction of the product
under warranty, mailed at least thirty (30) days before pursuing any legal rights or remedies.
54
THERMOSTAT LIMITED WARRANTY
WARRANTY CONDITIONS:
1. To obtain the longer warranty periods as shown in the table under original owner, for
the original purchaser, the product must be properly registered at www.bryant.com
within ninety (90) days of original installation. In jurisdictions where warranty terms
conditioned on registration are prohibited by law, registration is not required and the
longer warranty period shown will be apply.
2. Where a product is installed in a newly constructed home, the date of installation is the
date the homeowner purchased the home from the builder.
3. If the date of original installation cannot be verified, then the warranty period begins
ninety (90) days from the date of product manufacture (as indicated by the model and
serial number). Proof of purchase may be required at time of service.
4. The remainder of the first five years of warranty is freely transferable without
registration.
5. Product must be installed properly and by a licensed HVAC technician.
6. The warranty applies only to products remaining in their original installation location.
7. Installation, use, care, and maintenance must be normal and in accordance with
instructions contained in the Installation Instructions, Owner’s Manual and Company’s
service information.
8. Defective parts must be returned to the distributor through a registered servicing
dealer for credit.
LIMITATIONS OF WARRANTIES: ALL IMPLIED WARRANTIES AND/OR
CONDITIONS (INCLUDING IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE OR PURPOSE) ARE
LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. SOME STATES OR
55
THERMOSTAT LIMITED WARRANTY
PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY OR CONDITION LASTS, SO THE ABOVE MAY NOT APPLY TO YOU.
THE EXPRESS WARRANTIES MADE IN THIS WARRANTY ARE EXCLUSIVE AND
MAY NOT BE ALTERED, ENLARGED, OR CHANGED BY ANY DISTRIBUTOR,
DEALER, OR OTHER PERSON, WHATSOEVER.
THIS WARRANTY DOES NOT COVER:
1. Labor or other costs incurred for diagnosing, repairing, removing, installing, shipping,
servicing or handling of either defective parts, or replacement parts, or new units.
2. Any product purchased over the Internet.
3. Normal maintenance as outlined in the installation and servicing instructions or Owner’s
Manual, including filter cleaning and/or replacement and lubrication.
4. Failure, damage or repairs from faulty installation, misapplication, abuse, improper
servicing, unauthorized alteration or improper operation.
5. Failure to start due to voltage conditions, blown fuses, open circuit breakers, or damages
due to the inadequacy or interruption of electrical service.
6. Failure or damage due to floods, winds, fires, lightning, accidents, corrosive environments
(rust, etc) or other conditions beyond the control of Company.
7. Parts not supplied or designated by Company, or damages resulting from their use.
8. Products installed outside the U.S.A. or its territories and Canada.
9. Electricity or fuel costs, or increases in electricity or fuel costs from any reason
whatsoever, including additional or unusual use of supplemental electric heat.
10. Any cost to replace, refill or dispose of refrigerant, including the cost of refrigerant.
11. ANY SPECIAL, INDIRECT OR CONSEQUENTIAL PROPERTY OR
COMMERCIAL DAMAGE OF ANY NATURE WHATSOEVER. Some states or
provinces do not allow the exclusion of incidental or consequential damages, so the above
limitation may not apply to you.
This Warranty gives you specific legal rights, and you may also have other rights which vary
from state to state or province to province.
39004DP479
08/2011
56
Copyright 2012 Bryant Heating & Cooling Systems, 7310 W. Morris St. Indianapolis, IN 46231
Catalog No: OM--- T2PHP--- 05BR
Replaces: OM--- T2PHP--- 4BR
Edition Date: 05/12
Manufacturer reserves the right to change, at any time, specifications and designs without notice
and without obligations.
Download PDF