Pure Link Fiber Optic Extenders Owner`s manual

HDX II Owner’s Manual
Modular Fiber Optic HDMI Extender
Dtrovision LLC
9A Bergen Turnpike
Little Ferry, NJ 07643
Tel: 201.488.3232
Fax: 201.621.6118
E-mail: mpark@dtrovision.com
For technical support, contact:
PureLink by Dtrovision
Package Contents
Please make sure all of the following items are included in the package:
1) HDX II Transmitter Module
2) HDX II Receiver Module
3) 6ft HDMI Cable (x2)
4) DC 12V Power Supply Unit with a power cord
PureLink by Dtrovision
General Specification
HDX II is a HDMI extension system over pure fiber optic cable for long distance up to
Compact & durable design and low power consumption makes it an ideal solution for
connection for high definition video/audio signal of digital displays such as LCD/Plasma
displays and projectors.
HDX II’s unique circuitry and optic conversion design eliminates the need of a copper
connection (Cat 5) between the transmitter and receiver. This pure fiber optic
connection enables electrical noise free and EMI free that is ideal for long distance
extension of high definition HDMI signals with embedded audio.
HDX II’s intuitive LCD panel on both transmitter and receiver show the status of the
video and audio signals including the current signal image format and audio format. This
information provides helpful diagnostic information.
Input Signal
Output Signal
Supporting Display VGA ~WUXGA(up to 1920 x 1200 @ 60Hz) ,
480i ~ 1080p
Max. Distance
Connector Type
Power Rating
1920x1200 @ 60Hz or at 1080p: 1,000M(3,300ft)
1280x1024 @ 60Hz or at 1080i: 1,530M(5,000ft)
DC Power Jack
HDMI 19 Pin Female
LC Receptacles with 4 cores
HDMI version 1.3
DC +12V , 10W Max
53.6x46.5x9.86(inches) 136x118x25(mm)
Transmitter: 1.1Lbs(0.48Kg) / Receiver: 1.1Lbs(0.48Kg)
PureLink by Dtrovision
Operation and Reliability Specification
1. Operating Environment
: 50F ~ 104F (10℃~ 40℃)
: 10% ~ 80%
: 3,000m Max.
2. Transit Environment
: -13F ~ 140F (-25℃~ 60℃)
: 5% ~ 95%
: 15,000m Max.
3. Storage Environment
: -4F ~ -49F (-20℃~ 45℃)
: 5% ~ 95%
: 3,000m Max.
4. Reliability
MTBF: 90% at over 50,000 hours aging test
 In compliance with LCD Monitor reliability test standard
PureLink by Dtrovision
Main Features
1. Zero loss & Zero noise delivery of digital high definition video and audio signal us
ing optical conversion technology, HDX II delivers HD signals over fiber optic cabl
es without loss or digital interference maintaining the clarity and colors. Noise ca
ncellation and error correction logic enhances HDMI video and audio signals over
long distance.
2. Built-in signal repeater to support longer distance between the source and the H
DX II transmitter & HDX II receiver and the display. This Signal Repeater logic sup
ports up to 50ft copper based HDMI cables.
3. Compact and Robust Module Design
4. Long Distance (Up to 5000ft at 1080i or lower signal) over cost effective multimo
de fiber optic cables.
5. Full EDID Management
Saving/Emulating display’s EDID in the transmitter module enhances reliability
and compatibility with various displays.
6. HDCP (High-bandwidth Digital Content Protection) Support.
7. HDMI version 1.3 Support.
8. Signal Status LCD panel on both transmitter and receiver modules video and audi
o signal information is displayed on the LCD panels to help understand the signal
even before the display is connected. Display Resolution, refresh rates and audio
signal status are intuitively displayed on the modules.
PureLink by Dtrovision
Installation and Connection Instructions
Installation and Connection Instructions
1. Turn off both the video source and the display before connecting any cables.
2. Connect HDMI cable between the source and HDX II transmitter AND between th
e HDX II receiver and the display.
3. Connect LC terminated fiber optic cables according to the picture below;
4. Connect the power supply unit to both HDX II transmitter and receiver units.
5. Turn on Display
6. Turn on Video Source
EDID Management
For reliability and correct signal transmission of the video source, EDID emulation is recommended. Please
follow the steps below;
Connect the HDX II transmitter’s HDMI input port to the Display’s HDMI input port
Press and hold EDID switch for about 2 seconds until the Display’s EDID is successfully saved on t
o the transmitter. ‘EDID PASS’ message on the LCD panel indicates successful EDID save. ‘EDID ER
ROR’ message indicates failed EDID save. Please repeat the step #1 and #2.
** Factory Default EDID is based on 1080p.
<EDID Save Successful>
<EDID Save Failed>
PureLink by Dtrovision
Signal Status LCD Display
The LCD panel on HDX II transmitter and receiver shows the current signal status.
Example Status:
PureLink by Dtrovision
HDX II Transmitter and Receiver Specification
Module Dimensions: 53.6x46.5x9.86 (inches) 136x118x25(mm)
Transmitter Module
Connection Ports;
1234 optical receptacles
12V DC Power Supply Unit Input
Receiver Module
Connection Ports;
1234 optical receptacles
12V DC Power Supply Unit Input
LCD Panel Display;
LCD Display: 16x2 digital LCD
Power LED: Power On/Off Indication
Video LED: HDMI Video Signal Status
Audio LED: Audio Signal Status
EDID s/w: EDID Save Function button
PureLink by Dtrovision
Technical Specification
Data Transfer Speed:
Up to 10 Gbps
Frequency Range:
25 ~ 165 MHz
Supporting Display Resolutions:
1080p / Up to WUXGA (1920X1200)@60Hz
I/O Signal Standard:
Max Distance:
1,000m (3,300ft) at 1080p / 1920x1200@60Hz
1,500m (5,000ft) at 1080i / 1280x1024@60Hz
Optical Source:
850 nm Vcsel
Optical Cable Specification:
Multimode 50/125 or, 62.5/125
Input Ports:
HDMI Female 19P / LC Receptacles x 4 cores
Output Ports:
HDMI Female 19P / LC Receptacles x 4 cores
Power Consumption:
Transmitter: 2.65 Watts (Max) / Receiver: 3.48 Watts (Max)
Power Rating:
12V DC / 3A
PureLink by Dtrovision
2 (Two) Year Warranty
Dtrovision warrants this fiber optical HDMI extension cable to be free from defects in
workmanship and materials, under normal use and service, for a period of two (2) year
from the date of purchase from Dtrovision or its authorized resellers.
If a product does not work as warranted during the applicable warranty period,
Dtrovision shall, at its option and expense, repair the defective product or part, deliver
to customer an equivalent product or part to replace the defective item, or refund to
customer the purchase price paid for the defective product.
All products that are replaced will become the property of Dtrovision.
Replacement products may be new or reconditioned.
Any replaced or repaired product or part has a ninety (90) day warranty or the reminder
of the initial warranty period, whichever is longer.
Dtrovision shall not be responsible for any software, firmware, information, or memory
data of customer contained in, stored on, or integrated with any products returned to
Dtrovision for repair under warranty or not.
Warranty Limitation and Exclusion
Dtrovision shall have no further obligation under the foregoing limited warranty if the
product has been damaged due to abuse, misuse, neglect, accident, unusual physical or
electrical stress, unauthorized modifications, tampering, alterations, or service other
than by Dtrovision or its authorized agents, causes other than from ordinary use or
failure to properly use the Product in the application for which said Product is intended.
PureLink by Dtrovision
FCC/CE Statement
This device complies with part 15 of FCC Rules and EN 55022/55024/61000-3 for CE
certification. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must not accept any interference
received, including interference that may cause undesired operation. This equipment
has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 and 2 of FCC Rules and EN 55022/55024/61000-3 for CE
certification. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and. if not installed
and used in accordance with the instruction guide, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult a service representative for help.
Properly shielded and grounded cables and connectors must be used in order to comply
with FCC/CE emission limits. Changes or modifications not expressly approved by the
party responsible for compliance could void the user s authority to operate the
UL Statement
This device has completed a UL Commercial Inspection and Testing Services for the
multimode HDMI cable complied with VW-1 under UL 758. It is validated by the UL file
number SV2038 and project number 04CA05353.