TRULY SEMICONDUCTORS LIMITED

TRULY SEMICONDUCTORS LIMITED
TRULY SEMICONDUCTORS LIMITED
TRULY SEMICONDUCTORS LIMITED
1
TRULY SEMICONDUCTORS LIMITED
INTRODUCTION
Truly Semiconductors Limited, wholly owned subsidiary of Truly International Holdings Limited, was established
in 1991 with the headquarter in Hong Kong and all manufacturing facilities at Shanwei, Guangdong Province,
China.
The company is equipped with four state-of-the art liquid crystal display (LCD) and one touch-panel production
lines together with several fully automated module assembly lines. The products range from TFT, CSTN, OLED,
TN, STN, FSTN, DSTN, special feature displays and the modules. The factories occupy 800,000 square meters
gross space and 400,000 square meters floor area and have over 8000 employees which comprising of 350
management staff, 650 engineers and approximate 7000 production workers. In order to cope with the increased
demand for the TFT product, the company has invested on the 2.5 G Thin Film Transistor Array panel (TFT)
production line and starts the mass production on the second quarter of year 2007. Apart from the TFT products,
the company also expands the production facility for compact camera module and touch panel product in order
to cope with the increasing demand of the customers.
Truly's display products are mainly serving the portable electronic device market (mobile phone, MP3, PDA,
PMP, cordless phone etc); the industrial market (machinery control unit, office automation, instrument, etc);
the automotive market (main dashboard, central control station, GPS, etc); and the consumer electronic market
(Hi-Fi, DVD player, white goods). Apart from huge business inside PRC, significant proportions of products
are exported to Europe, Japan, Korea and US. The success of the company emphasizes the balance technology
development on product portfolio from monochrome displays TN, STN, FSTN, ETN, ASTN on the industrial,
automotive and equipment; full colour technology of CSTN on the mobile phone, DECT phone and educational
toys; small TFT on the mobile phone and multi-media players; medium size TFT on industrial, handheld device,
automotive and equipment; OLED on the MP3 and mobile phone. The touch panel and Compact Camera
Module products also successfully penetrate to the mobile phone manufacturer. Also, Truly Semiconductors
Ltd has long anticipated the next generation flat panel technology-organic light emitting diode (OLED). OLED
is a well-known emissive display technology for high power efficiency, fast response time and its thinness. Because
of the many advantages of this technology it is an excellent candidate for portable electronic devices. The company
obtained a license from Eastman Kodak, set up the R&D and pilot production facilities since 2003, and it's now
shipping full colour OLED modules to customers.
Superior product quality is the key factor of Truly's success. In addition to TL9000 accreditation in 2002 (Quality
System for Telecommunication Industry), Truly Semiconductors Ltd has been accredited ISO/TS 16949 in 2003
(Quality System for Automotive Industry). Truly Semiconductors Ltd has a long history of complying with
ISO14000 Environmental Management System and a solder program has been successfully implemented.
The company is continuously improving of the capacity, technology, quality and efficiency. Truly Semiconductors
Limited is in the unique position of having the expertise to address all established flat panel display technologies
and manufacturing processes in the World today.
2
TABLE OF CONTENTS
Introduction
Product List
Specifications of Character Display Modules
Specifications of Monochrome LCD Modules
Specifications of CSTN Modules
Specifications of TFT Modules
Specifications of Touch Panels
Specifications of Camera Modules
Specifications of OLED
Monochrome Optical Characteristics
Technical Issues
LCD Mounting Methods
Production Processes
Backlights for LCD Modules
Basic Instructions for Character LCD Modules
Interface Pin Connections
Instruction Set
Character Modules Font Table (Standard Font)
Character Modules Font Table (European Font)
Monochrome Reliability Criteria
Monochrome Absolute Maximum Ratings
Reliability Test Data
Proper Use of LCD Modules
Liquid Crystal Display Handing Procedures
Standard LCD Module Numbering System
Standard TFT LCD Module System
Touch Panel Numbering System
CCM Numbering System
Custom Design OLED Numbering System
Check List for Custom Design LCD Panels
Check List for Custom Design LCD Modules
PAGE
2
5
9
32
107
120
144
156
170
186
188
189
190
191
193
193
195
196
197
198
198
199
201
202
204
205
206
207
208
209
210
5
MODULE SIZE
( Width x Height x Thickness )
80 x 36 x 14
80 x 36 x 14
122 x 33 x 14.5
80 x 36 x 14.8
80 x 36 x 14
122 x 44 x 14
84 x 44 x 10
80 x 36 x 14
80 x 36 x 14
65 x 27.7 x 3.4
65 x 27.7 x 3.4
85 x 30 x 15.8
85 x 30 x 15.8
84 x 60 x 14
116 x 37 x 14
98 x 60 x 14
98 x 60 x 11
98 x 60 x 15
118 x 36 x 14
182 x 33.5 x 11
182 x 33.5 x 14.5
190 x 54 x 14
190 x 54 x 14
MODEL NO.
MC161-1
MC161-2
MC161-4
MC162-1
MC162-2
MC162-3
MC162-4
MC162-8
MC162-9
MC162-14
MC162-15
MC162-16
MC162-17
MC164-2
MC202-1
MC204-1
MC204-2
MC204-31
MC242-1
MC401-1
MC402-1
MC404-1
MC404-10
MG11264-1
MG12064-1
MG12232-3
MG12232-10
MG12232-11
MG12232-61
MG12864-1
MG12864-2
MG12864-4
MG12864-5
MG12864-6
MG12864-7
MG12864-8
MG12864-10
MG12864-11
MG12864-12
MG12864-15
MG12864-23
MG12864-24
MG12864-27
MG12864-28
MG12864-32
MG12864-151
MG128128-1
MG128128-2
MG128128-58
MG128128-141
MG13265-3
MG160160-7
MG160240-2
MG160240-3
MG160240-6
MODEL
NO.
59.45 x 6.35
59.45 x 6.35
94.84 x 9.55
57.7 x 9.5
57.7 x 9.5
94.84 x 20
56.2 x 11
56.2 x 11.5
56.2 x 11.5
56.2 x 10
56.2 x 10
55.73 x 10.9
55.73 x 10.98
56.2 x 20.8
75.4 x 11.9
70.4 x 20.8
70.4 x 20.8
70.4 x 20.8
88.3 x 11.5
154.5 x 15.8
147.5 x 11.5
140.5 x 29.15
140.5 x 23.16
VIEWING AREA
(WxH)
CHARACTER
SIZE
(WxH)
3.2 x 6.35
3.2 x 6.35
4.84 x 8.06
2.95 x 4.35
2.95 x 4.35
4.84 x 9.66
2.95 x 5.55
2.95 x 5.55
2.95 x 5.55
2.95 x 5.15
2.95 x 5.15
2.78 x 4.89
2.78 x 4.89
2.95 x 4.75
3.2 x 5.55
2.95 x 4.75
2.95 x 4.75
2.95 x 4.75
3.2 x 5.55
3.2 x 6.35
3.2 x 5.55
2.78 x 4.89
2.78 x 4.89
39.34 x 28.9 x 6.0
74.0 x 76.9 x 2.9
56.1 x 29.2 x 5.5
65.6 x 29.2 x 5.5
56.1 x 29.2 x 5.5
45.05 x 22.32 x 6.3
93.0 x 70.0 x 11.0
113.0 x 65.0 x 11.0
93.0 x 70.0 x 8.5
78.0 x 70.0 x (10/13/14.5)
54.0 x 54.5 x 10.0
54.0 x 50.0 x 6.5
59.0 x 39.5 x 2.0
113.0 x 65.0 x 11.0
100.0 x 58.5 x 11.8
54.0 x 54.5 x 10.0
78.0 x 70.0 x 14.5
93.0 x 70.0 x 13.5
78.0 x 70.0 x (10/13/14.5)
93.0 x 70.0 x 14.0
80.0 x 44.0 x 12.0
93.0 x 70.0 x 11.0
78.0 x 70.0 x 14.5
85.0 x 100.0 x (10/12.5)
65.4 x 70.0 x 12.3
36.3 x 43.2 x 2.1
65.4 x 70.0 x 12.0
57.0 x 39.0 x 2.8
60.2 x 62.65 x 4.5
63.0 x 74.6 x 8.0
74.6 x 53.1 x 5.5
52.9 x 70.6 x 5.2
31.5 x 20.3
70.0 x 38.0
49.1 x 19.0
54.8 x 19.1
49.1 x 19.0
38.56 x 13.16
70.7 x 38.8
73.4 x 38.8
70.7 x 38.8
62.0 x 44.0
44.5 x 29.5
43.5 x 29.0
54.0 x 31.0
73.4 x 38.8
54.0 x 31.0
44.5 x 29.5
62.0 x 44.0
70.5 x 38.5
62.0 x 44.0
70.7 x 38.8
54.0 x 31.0
70.7 x 38.8
62.0 x 44.0
62.0 x 62.0
49.0 x 49.0
30.5 x 32.0
49.0 x 49.0
42.0 x 24.0
46.2 x 49.4
42.5 x 61.6
60.6 x 41.5
41.4 x 60.6
0.25 x 0.26
0.53 x 0.53
0.37 x 0.4
0.4 x 0.45
0.37 x 0.4
0.3 x 0.32
0.52 x 0.52
0.52 x 0.52
0.52 x 0.52
0.44 x 0.6
0.33 x 0.43
0.32 x 0.39
0.37 x 0.41
0.52 x 0.52
0.37 x 0.41
0.33 x 0.43
0.44 x 0.6
0.52 x 0.52
0.44 x 0.6
0.52 x 0.52
0.37 x 0.41
0.52 x 0.52
0.44 x 0.6
0.43 x 0.43
0.35 x 0.35
0.21 x 0.23
0.35 x 0.35
0.3 x 0.3
0.27 x 0.29
0.24 x 0.24
0.24 x 0.24
0.24 x 0.24
MODULE SIZE
VIEWING AREA
DOT PITCH
( Width x Height x Thickness ) ( Width x Height ) ( Width x Height )
All unit measurements are in mm’s.
NO. OF DOTS
OR PIXEL
( Width x Height )
112 x 64
120 x 64
122 x 32
122 x 32
122 x 32
122 x 32
128 x 64
128 x 64
128 x 64
128 x 64
128 x 64
128 x 64
128 x 64
128 x 64
128 x 64
128 x 64
128 x 64
128 x 64
128 x 64
128 x 64
128 x 64
128 x 64
128 x 64
128 x 128
128 x 128
128 x 128
128 x 128
132 x 65
160 x 160
160 x 240
160 x 240
160 x 240
MONOCHROME LCD MODULES :
NO. OF
DISPLAY
CHAR. x LINE
16 x 1
16 x 1
16 x 1
16 x 2
16 x 2
16 x 2
16 x 2
16 x 2
16 x 2
16 x 2
16 x 2
16 x 2
16 x 2
16 x 4
20 x 2
20 x 4
20 x 4
20 x 4
24 x 2
40 x 1
40 x 2
40 x 4
40 x 4
CHARACTER DISPLAY MODULES :
0.22 x 0.23
0.49 x 0.49
0.33 x 0.36
0.36 x 0.41
0.33 x 0.36
0.26 x 0.28
0.48 x 0.48
0.48 x 0.48
0.48 x 0.48
0.39 x 0.55
0.3 x 0.4
0.28 x 0.35
0.34 x 0.38
0.48 x 0.48
0.34 x 0.38
0.3 x 0.4
0.39 x 0.55
0.48 x 0.48
0.39 x 0.55
0.48 x 0.48
0.34 x 0.37
0.48 x 0.48
0.39 x 0.55
0.39 x 0.39
0.32 x 0.32
0.2 x 0.22
0.32 x 0.32
0.27 x 0.27
0.255 x 0.275
0.23 x 0.23
0.23 x 0.23
0.22 x 0.22
DOT SIZE
( Width x Height )
0.6 x 0.75
0.6 x 0.75
0.92 x 1.1
0.55 x 0.5
0.55 x 0.5
0.92 x 1.1
0.55 x 0.65
0.55 x 0.65
0.55 x 0.65
0.55 x 0.6
0.55 x 0.6
0.5 x 0.55
0.5 x 0.55
0.55 x 0.55
0.6 x 0.65
0.55 x 0.55
0.55 x 0.55
0.55 x 0.55
0.6 x 0.65
0.6 x 0.75
0.6 x 0.75
0.5 x 0.55
0.5 x 0.55
DOT SIZE
(WxH)
2.5~3.6
2.4~3.6
3
3
3
3
5
5
5
5
5
5
2.4~3.6
5
3.3
5
5
3.3
5
5
3
5
5
5
5
3
5
2.4~3.6
5
3.3
5
5
SUPPLY
VOLTAGE
TAB
TAB
COB
COB
COB
COB
COB
COB
COB
COB
COB
COB
TAB
COB
TAB
COB
QFP
TAB
COB
COB
COG
COB
COB
COB
QFP
COG
COB
COG
COG
TAB
TAB
COG
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
NONE
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
BACK – LIGHT
STN / FSTN
EL
LED
∗
∗
∗
∗
∗
∗
∗
LED
∗
∗
∗
∗
∗
∗
∗
BACK – LIGHT
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
NONE
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
TN
EL
∗
∗
∗
NONE
∗
∗
∗
∗
∗
∗
∗
IC
PACKAGE
COB
COB
COB
COB
COB
COB
COB
COB
COB
COG
COG
COB
COB
COB
COB
COG
COB
COB
COB
COB
COB
COB
COB
IC
PACKAGE
S6B1713A01
KS0713TB
SED1520
CS1520
CS1520
PT6520
KS0107B, KS0108B
KS0107B, KS0108B
S6B0107B, S6B0108A
S6B0107B, S6B0108A
S6B0107B, S6B0108A
S6B0107B, S6B0108B
KS0713TB-01
S6B0107B, S6B0108A
KS0713
S6B0107B, S6B0108A
T6963C, T6A39, T6A40
KS0713-01
S6B0107B, S6B0108A
KS0107B, KS0108B
SPLC501C
ST7920, ST7921
S6B0086, T6963C
S6B0107B, S6B0108A
T6963C, T6A39, T6A40
UC1610IGAB
T6963CFG
S6B1713A01-BOCZ
EK7011CG
SED1335FOA, NT7701F3, NT7702F4
NT7701, NT7702
EK7010, EK7011
BUILT-IN CONTROLLER
LSI OR EQUIV
CONTROLLER
LSI
OR EQUIV
S6A0069
S6A0069
S6A0069
S6A0069
S6A0070
S6A0070
S6A0070
KS0070B
S6A0070
SPLC782A-01-C
NT7603H-BDT01
NT7065, NT7066U
NT0066
S6A0070
S6A0069
S6A0069
KS0075
KS0066U
S6A0069
KS0066U
S6A0069
S6A0069
NT7066
CCFL
∗
∗
∗
∗
∗
∗
∗
∗
∗
STN
EL
∗
TOUCH
PANEL
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
LED
∗
∗
∗
∗
∗
∗
∗
∗
∗
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
REFERENCE
PAGE
Unit : mm
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
REFERENCE
PAGE
Unit : mm
6
MCG160120-1
MCG240320-2
MCG240320-21
MCG320240-15
MCG320240-28
MCG320240-31
MCG320240-33
MCG320240-47
MCG320240-151
MCG320240-281
MCG320240-282
MCG320240-283
MCG480320-2
160 x 120
240 x 320
240 x 320
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
480 x 320
77.4 x 55.5 x 5.0
68.0 x 82.0 x 6.7
68.0 x 82.0 x 7.0
146.5 x 109.0 x 8.5
146.5 x 109.0 x 9.0
154.6 x 114.8 x 8.7
112.0 x 82.09 x 10.0
154.6 x 114.8 x 8.7
146.5 x 109.0 x 9.2
146.5 x 109.0 x 9.0
146.5 x 109.0 x 9.0
146.5 x 109.0 x 9.0
164.0 x 94.9 x 11.5
MODULE SIZE
( Width x Height
x Thickness )
84.0 x 31.0
84.0 x 31.0
100.0 x 37.0
84.0 x 31.0
84.0 x 31.0
82.0 x 39.0
104.0 x 39.0
104.0 x 39.0
132.6 x 39.0
132.6 x 39.0
114.0 x 64.0
114.0 x 64.0
84.0 x 49.3
84.0 x 49.3
61.6 x 42.5
61.6 x 42.5
61.6 x 42.5
61.6 x 42.5
61.1 x 80.55
82.6 x 63.4
122.0 x 92.0
61.1 x 80.55
87.9 x 69.8
100.0 x 75.0
121.0 x 91.6
122.0 x 92.0
103.0 x 79.0
95.0 x 72.0
45.4 x 59.6
77.79 x 58.59
77.79 x 58.59
122.0 x 92.0
122.0 x 92.0
122.0 x 92.0
122.0 x 92.0
61.1 x 80.55
103.0 x 79.0
103.0 x 79.0
122.0 x 92.0
122.0 x 92.0
229.5 x 36
119.2 x 80.4
215.2 x 162.4
160(RGB) x 120 / 65K Color
240 x 320(RGB) / 65K Color
240 x 320(RGB) / 65K Color
320(RGB) x 240 / 65K Color
320(RGB) x 240 / 65K Color
320(RGB) x 240 / 65K Color
320(RGB) x 240 / 65K Color
320(RGB) x 240 / 65K Color
320(RGB) x 240 / 65K Color
320(RGB) x 240 / 65K Color
320(RGB) x 240 / 65K Color
320(RGB) x 240 / 65K Color
480(RGB) x 320 / 65K Color
DISPLAY
FORMAT/COLORS
100.0 x 60.0 x (10/12)
100.0 x 60.0 x (10/12)
120.0 x 62.0 x 12.5
100.0 x 60.0 x 13.0
100.0 x 60.0 x 12.5
100.4 x 63.0 x 9.8
130.0 x 65.0 x 12.5
130.0 x 65.0 x 12.5
180.0 x 75.0 x (11/14)
180.0 x 65.0 x 14.0
148.0 x 104.0 x 13.0
148.0 x 104.0 x 14.0
105.0 x 75.0 x 11.0
105.0 x 75.0 x 11.0
74.6 x 56.1 x 4.5
74.6 x 53.5 x 6.1
74.6 x 56.1 x 5.3
74.6 x 56.1 x 5.3
70.5 x 89 x 7.3
93.8 x 75.1 x 5.0
167.0 x 109.0 x 12.0
70.5 x 89.0 x 7.3
122.0 x 83.3 x 11.5
144.8 x 104.0 x 7.5
268.0 x 190.0 x 7.0
167.0 x 109.0 x 12.0
139.0 x 120.0 x 13.2
130.0 x 79.0 x 10.0
58.0 x 67.1 x 6.0
96.2 x 72.0 x 9.3
96.8 x 70.7 x 4.7
167.0 x 109.0 x 13.0
167.0 x 109.0 x 13.5
166.8 x 109.0 x 13.5
167.0 x 109.0 x 13.0
70.5 x 89.0 x 8.0
139.0 x 120.0 x 13.2
139.0 x 120.0 x 13.2
167.0 x 109.0 x 13.5
166.8 x 109.0 x 13.5
260.0 x 58.0 x 11.0
156.0 x 94.9 x 11.5
268.0 x 190.0 x 7.0
60.1 x 45.6
54.4 x 71.2
54.4 x 71.2
119.18 x 90.38
119.18 x 90.38
118.2 x 89.4
100.0 x 72.2
118.2 x 89.4
119.18 x 90.38
119.18 x 90.38
119.18 x 90.38
119.18 x 90.38
119.2 x 80.4
VIEWING AREA
( Width x Height )
0.41 x 0.41
0.41 x 0.41
0.5 x 0.5
0.41 x 0.41
0.41 x 0.41
0.41 x 0.41
0.508 x 0.508
0.508 x 0.508
0.53 x 0.53
0.53 x 0.53
0.45 x 0.45
0.45 x 0.45
0.3 x 0.3
0.3 x 0.3
0.24 x 0.24
0.24 x 0.24
0.24 x 0.24
0.24 x 0.24
0.24 x 0.24
0.24 x 0.24
0.36 x 0.36
0.24 x 0.24
0.265 x 0.27
0.3 x 0.3
0.36 x 0.36
0.36 x 0.36
0.3 x 0.3
0.285 x 0.285
0.195 x 0.195
0.24 x 0.24
0.24 x 0.24
0.36 x 0.36
0.36 x 0.36
0.36 x 0.36
0.36 x 0.36
0.24 x 0.24
0.3 x 0.3
0.3 x 0.3
0.36 x 0.36
0.36 x 0.36
0.47 x 0.47
0.24 x 0.24
0.33 x 0.33
0.121 x 0.363
0.21 x 0.07
0.21 x 0.07
0.12 x 0.36
0.12 x 0.36
0.12 x 0.36
0.27 x 0.27
0.12 x 0.36
0.12 x 0.36
0.12 x 0.36
0.12 x 0.36
0.12 x 0.36
0.12 x 0.36
0.105 x 0.347
0.195 x 0.055
0.195 x 0.055
0.1 x 0.34
0.1 x 0.34
0.105 x 0.345
0.25 x 0.25
0.105 x 0.345
0.105 x 0.345
0.105 x 0.345
0.105 x 0.345
0.105 x 0.345
0.105 x 0.345
DOT SIZE
( Width x Height )
1/120
1/240
1/240
1/240
1/240
1/240
1/240
1/240
1/240
1/240
1/240
1/240
1/320
DRIVING
METHOD
DUTY
∗
∗
∗
∗
NONE
∗
∗
∗
∗
∗
BUILT-IN CONTROLLER
LSI OR EQUIV
COB
COB
COB
COB
COB
COG
COB
COB
COB
COB
COB
COB
COF
COF
TAB
TAB
TAB
TAB
TAB
TAB
QFP
TAB
TAB
TAB
TAB
QFP
QFP
TAB
TAB
TAB
TAB
TAB
TAB
TAB
TAB
TAB
TAB
TAB
TAB
TAB
COB
TAB
TAB
IC
PACKAGE
ST8016, ST8024
IST3032TA0, IST3033TA1
IST3032TA0, IST3033CA1
NT7702
NT7702, NT7701
IST3032TA0, SMC51542, IST3033
SSD1706T, SSD1702T1
SMC51542, NT7702, NT7707
SSD1702T1, SSD1706T
SSD1702T1, SSD1706T
SSD1702T1, SSD1706T
SSD1702T1, SSD1706T
NT7701, NT7706
S6B0107B, S6B0108A
S6B0107B, S6B0108A
S6B0107B, S6B0108A
S6B0107B, S6B0108A
S6B0107B, S6B0108A
ST7565P
S6B0407, S6B0108
SEG1-80, SEG81-160, SEG161-192
S6B0107B, S6B0108A
T6963C, SPLC0086
RA8863, S6B0086
RA8863, S6B0086
UC1608
UC1608
LH1560, LH1562
RA8822S
LH1560, LH1562
NT7701F3, NT7702F4
NT7701F3, NT7702F4
NT7701F3, NT7702F4
S6B0086
SSD1870, SSD1882
NT7701F3, NT7702F4
LH1530F, LH1542F
LH1530F, LH1542F
S6B2086X01-TO
S6B2086X01-TO
NT7701, NT7702
IST3031TA0, IST3032TB0
LH1560F3, LH1562F4
LH1560F3, LH1562F4
RA8803, SPLC086A
NT7701, NT7702
NT7701, NT7702
RA8835P3N, SPLC086A
RA8835P3N
RA8835P3N, S6B2086
RA8835P3N, S6B2086
NT7701, NT7702
NT7701, NT7702
S6B0086
NT7701F1, NT7701H-18A
LH1532F, LH1542F
BUILT-IN CONTROLLER
LSI OR EQUIV
MAIN DISPLAY
5
5
5
5
5
3
2.7~5
2.7~5
5
5
5
5
3
3
3.3
2.4~5.5
3.3
5
5
5
5
3
3~5
5
5
5
5
5
3.3
5
5
5
5
5
5
5
5
5
5
5
5
3.3
5
DOT PITCH
( Width x Height )
0.36 x 0.36
0.36 x 0.36
0.46 x 0.46
0.36 x 0.36
0.36 x 0.36
0.36 x 0.36
0.458 x 0.458
0.458 x 0.458
0.48 x 0.48
0.48 x 0.48
0.4 x 0.4
0.4 x 0.4
0.28 x 0.28
0.28 x 0.28
0.23 x 0.23
0.23 x 0.23
0.23 x 0.23
0.23 x 0.23
0.225 x 0.225
0.23 x 0.23
0.33 x 0.33
0.225 x 0.225
0.245 x 0.25
0.28 x 0.28
0.33 x 0.33
0.27 x 0.27
0.27 x 0.27
0.27 x 0.27
0.18 x 0.18
0.23 x 0.23
0.23 x 0.23
0.33 x 0.33
0.33 x 0.33
0.33 x 0.33
0.33 x 0.33
0.225 x 0.225
0.27 x 0.27
0.27 x 0.27
0.33 x 0.33
0.33 x 0.33
0.43 x 0.43
0.228 x 0.228
0.3 x 0.3
MODULE SIZE
VIEWING AREA
DOT PITCH
DOT SIZE
SUPPLY
( Width x Height x Thickness ) ( Width x Height ) ( Width x Height ) ( Width x Height ) VOLTAGE
All unit measurements are in mm’s.
MODEL NO.
DOTS
CSTN MODULES :
MG19264-1
MG19264-2
MG19264-3
MG19264-5
MG19264-8
MG19264-61
MG19264-70
MG19264-71
MG24064-13
MG24064-21
MG240128-7
MG240128-11
MG240128-51
MG240128-52
MG240160-1
MG240160-1(ch)
MG240160-2
MG240320-4
MG320240-4
MG320240-10
MG320240-11
MG320240-13
MG320240-14
MG320240-19
MG320240-20
MG320240-22
MG320240-23
MG320240-29
MG320240-30
MG320240-100TP
MG320240-100QR
MG320240-211(ch)
MG320240-212
MG320240-213
MG320240-214
MG320240-261
MG320240-271
MG320240-272
MG320240-370
MG320240-371
MG48064-1
MG480320-1
MG640480-2
MODEL
NO.
MONOCHROME LCD MODULES :
NO. OF DOTS
OR PIXEL
( Width x Height )
192 x 64
192 x 64
192 x 64
192 x 64
192 x 64
192 x 64
192 x 64
192 x 64
240 x 64
240 x 64
240 x 128
240 x 128
240 x 128
240 x 128
240 x 160
240 x 160
240 x 160
240 x 320
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
320 x 240
480 x 64
480 x 320
640 x 480
∗
∗
5
3.3
3.3
5.0
5.0
5.0
3.5
5.0
3.3
3.3
3.3
3.3
3.3
SUPPLY
VOLTAGE
∗
∗
∗
∗
∗
∗
∗
∗
∗
BACK – LIGHT
STN / FSTN
EL
LED
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
TOUCH
PANEL
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
REFERENCE
PAGE
BACK-LIGHT TOUCH REFERENCE
PANEL
PAGE
LED CCFL
∗
107
∗
∗
108
∗
109
∗
∗
110
∗
∗
111
∗
112
∗
∗
113
∗
114
∗
∗
115
∗
116
∗
∗
117
∗
118
∗
119
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
CCFL
Unit : mm
7
TFT128160-37
TFT240320-8
TFT240320-26
TFT320234-1
TFT320240-32
TFT320240-43
TFT320240-48
TFT320240-50
TFT320240-62
TFT400234-2
TFT400234-3
TFT400240-1
TFT480234-2
TFT480234-3
TFT480234-4
TFT480234-5
TFT480234-9
TFT480234-15
TFT480272-2
TFT480272-3
TFT800480-4
TFT800480-7
TFT800480-8
TFT800480-10
1.8
3.2
2.41
5.6
4.0
3.5
3.5
5.7
3.5
6.5
6.5
6.5
3.5
7.0
7.0
3.5
7.0
7.0
4.3
4.0
7.0
8.5
8.5
7.0
OV7663/60
S5K53BEA
OV7663/60
OV7670
NOON030PC11
SAP07663-8
OV7663/60
MC501CA
OV9653
OV9653
OV9653
OV9653
NOON200PC11
OV2640
All unit measurements are in mm’s.
COMOS SENSOR
MODEL NO.
CM1180A030SF
CM1228O030SF
CM1275B030SF
CM1327B030SF
CM1344B030SF
CM1364B030SF
CM1434B030SF-E
CM1480A030SF
CM1009B130SF
CM1066O130SF
CM1176O130SF
CM1208A130SF
CM1323A200SF
CM1360A200SF
CAMERA MODULES :
2.9
2.8
5.8
3.4
1.9
1.8
2.3
2.2
5.8
5.8
3.2
4.1
SIZE (inch)
DISPLAY
FORMAT
128(RGB) x 160
240(RGB) x 320
240(RGB) x 320
320(RGB) x 234
320(RGB) x 240
320(RGB) x 240
320(RGB) x 240
320(RGB) x 240
320(RGB) x 240
400(RGB) x 234
400(RGB) x 234
400(RGB) x 240
480(RGB) x 234
480(RGB) x 234
480(RGB) x 234
480(RGB) x 234
480(RGB) x 234
480(RGB) x 234
480(RGB) x 272
480(RGB) x 272
800(RGB) x 480
800(RGB) x 480
800(RGB) x 480
800(RGB) x 480
TOUCH PANELS :
TFT
MODEL NO.
AA SIZE
(Inch)
TFT MODULES :
664 x 492
640 x 480
664 x 492
640 x 480
640 x 480
664 x 492
664 x 492
640 x 480
1300 x 1028
1300 x 1028
1300 x 1028
1300 x 1028
1600 x 1200
1600 x 1200
ARRAY SIZE
TS043-AFGF-29
TS045-AFGF-28
TS061-AFGF-58
TS078-AFGF-34
TS085-AFGF-19
TS096-AFGF-18
TS138-AFGF-23
TS164-AFGF-22
TS245-AFGF-58
TS289-AFGF-58
TS302-AFGF-32
TS303-AFGF-41
MODEL NO.
34.0 x 47.25 x 3.25
57.54 x 79.4 x 3.5
42.72 x 59.46 x 3.0
113.28 x 87.7 x 6.8
98.4 x 78.0 x 10.4
79.0 x 66.0 x 3.8
79.0 x 66.0 x 5.0
126.08 x 101.54 x 6.35
79.0 x 66.0 x 3.8
155.5 x 89.8 x 6.8
155.5 x 89.8 x 7.8
155.3 x 91.0 x 6.5
83.0 x 60.5 x 3.2
166.0 x 100.0 x 7.0
164.9 x 100.0 x 5.7
83.7 x 68.6 x 6.5
164.9 x 100.0 x 5.7
165.0 x 100.0 x 5.9
105.14 x 66.21 x 3.3
98.3 x 62.6 x 4.65
165.0 x 104.0 x 10.5
198.95 x 126.03 x 7.6
198.95 x 126.03 x 7.6
165.0 x 104.0 x 11.7
MODULE SIZE
( Width x Height
x Thickness )
2.9mm
2.65mm
3.1mm
2.43mm
2.14mm
3.15mm
3.2mm
2.14mm
4.5mm
4.1mm
3.99mm
3.99mm
4.46mm
3.39mm
EFL
30.4 x 37.82
48.6 x 64.8
38.82 x 50.56
126.5 x 100
81.6 x 61.2
70.08 x 52.56
70.08 x 52.56
117.4 x 88.
73.2 x 55.6
145.8 x 81.7
145.6 x 81.5
146.6 x 82.0
72.0 x 50.54
154.08 x 86.58
154.08 x 86.58
75.1 x 53.7
154.08 x 86.58
156.6 x 89.2
95.04 x 53.86
90.84 x 52.78
152.4 x 91.44
188.46 x 114.46
188.46 x 114.46
156.0 x95.04
VIEWING AREA
( Width x Height )
Digital
Digital
Digital
Analog
Digital
Digital
Digital
Digital
Digital
Analog
Analog
Digital
Analog
Analog
Analog
Analog
Analog
Analog
Digital
Digital
Digital
Digital
Digital
Digital
INTERFACE
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
Stripe
COLOR
ARRAY
Portrait
Portrait
Portrait
Landscape
Landscape
Landscape
Landscape
Landscape
Landscape
Landscape
Landscape
Landscape
Landscape
Landscape
Landscape
Landscape
Landscape
Landscape
Landscape
Landscape
Landscape
Landscape
Landscape
Landscape
FORMAT
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
2.8
F. NO.
>6.2º
>60º
>59º
>66.3º
>61.2º
>61º
>60º
>61º
>59º
>68º
>70.3º
>70º
>68º
>71º
VIEW ANGLE
53.25 x 67.1 x 1.1
52.9 x 70.6 x 0.8
109.0 x 142.4 x 1.35
62.3 x 80.3 x 1.0
38.5 x 49.5 x 0.95
34.5 x 46.5 x 1.05
40.1 x 53.96 x 1.35
38.1 x 52.5 x 1.1
109.0 x 142.4 x 1.6
109.0 x 142.4 x 1.6
56.74 x 79.0 x 1.15
98.4 x 78.0 x 1.55
MODULE SIZE ( Width x Height x Thickness )
65K
262K
262K
262K
262K
262K
262K
262K
16.7M
262K
262K
262K
262K
262K
262K
262K
262K
262K
16.7M
16.7M
262K
262K
262K
262K
COLOR
<1%
<1%
<1%
<1%
<1%
<1%
<1%
<1%
<1%
<1%
<1%
<1%
<1%
<1%
CONTROLLER /
IC DRIVER
>200TV Line
>200TV Line
>200TV Line
>200TV Line
>200TV Line
>200TV Line
>200TV Line
>200TV Line
>500TV Line
>500TV Line
>500TV Line
>500TV Line
>600TV Line
>600TV Line
RESOLUTION
45.4 x 59.6
39.38 x 58.58
88.38 x 117.18
51.4 x 68.2
31.32 x 36.99
29.69 x 35.69
34.48 x 45.64
33.49 x 43.70
88.38 x 117.18
88.38 x 117.18
49.2 x 64.5
82.6 x 62.2
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
20cm ~ Infinity
20cm ~ Infinity
20cm ~ Infinity
20cm ~ Infinity
20cm ~ Infinity
20cm ~ Infinity
20cm ~ Infinity
20cm ~ Infinity
50cm ~ Infinity
50cm ~ Infinity
50cm ~ Infinity
50cm ~ Infinity
80cm ~ Infinity
80cm ~ Infinity
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
CCFL
∗
∗
TOUCH
PANEL
6
9
12
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
12
6
1/5 Inch 2P+IR
1/5.8 Inch 2P+IR
1/5 Inch 2P+IR
1/6 Inch 2P+IR
1/7 Inch 2P+IR
1/5 Inch 2P+IR
1/5 Inch 2P+IR
1/7 Inch 2P+IR
1/4 Inch 3P+IR
1/4 Inch 3P+IR
1/4 Inch 3P+IR
1/4 Inch 3P+IR
1/3 Inch 3P+IR
1/4 Inch 3P+IR
LENS SIZE
4
4
4
4
4
4
4
4
4
4
4
4
REMARKS
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
REFERENCE
PAGE
156
157
158
159
160
161
162
163
164
165
166
167
168
169
REFERENCE PAGE
144
145
146
147
148
149
150
151
152
153
154
155
REFERENCE PAGE
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
VIEW
ANGLE ROHS
CONNECTING WIRES
LED
BACKLIGHT
TYPE
FOCUSING RANGE
ACTIVE AREA ( Width x Height )
HCD667B73RBP / HX8303
IS2102 / IS2202
R61505B0C3
/
HX8206B / HX8615A
HX8218 / HX8615
HX8218 / HX8615
HX8218C / HX8615A
HX8218A / HX8615A
/
/
/
/
/
HX8206B / HX8615A
/
NT3947 / NT39324
NT3947 / NT39324
HX8655 + HX8227
/
/
HX8232A, HX8643A / NT39406, NT39202
HX8232A, HX8643A / NT39406, NT39202
HX8232A, HX8643A / NT39406, NT39202
DISTARTION
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
Transmissive
DISPLAY
MODE
8
TOD9M002-L3QR
TOD9M003-A2QR
TOD9M004-A3QR
TOD9M005-A3QR
TOD9M007-BQR
TOD9M007-GQR
TOD9M007-RQR
TOD9M007-WQR
TOD9M008-BQR
TOD9M0010-A3QR
TOD9M0014-L3QR
TOD9M0018-A2QR
TOD9M0018-RQR
TOD9M0018-WQR
TOD9M5006-L4QR
TOD9M5007-4QR
96 x 64
96 x 48
96 x 62
96 x 62
96 x 64
96 x 64
96 x 64
96 x 64
96 x 64
96 x 62
96 x 64
128 x 64
128 x 64
128 x 64
160 x 128
160 x 128
All unit measurements are in mm’s.
MODEL NO.
DOTS
OLED :
26.66 x 20.38 x 1.6
28.0 x 20.3 x 1.6
28.0 x 20.3 x 1.6
28.0 x 20.3 x 1.6
28.0 x 20.3 x 1.6
28.0 x 23.3 x 1.6
28.0 x 20.3 x 1.6
28.0 x 20.3 x 1.6
28.0 x 20.3 x 1.6
28.0 x 20.3 x 1.6
26.66 x 20.38 x 1.6
30.0 x 20.16 x 1.6
30.0 x 20.16 x 1.6
30.0 x 20.16 x 1.6
43.4 x 34.6 x 18.35
37.7 x 30.4 x 1.835
MODULE SIZE
( Width x Height x Thickness )
95(RGB) x 64 / 65K Color
96 x 48 / Blue & Yellow
96 x 62 / Blue & Area Color
96 x 62 / Blue & Area Color
96 x 64 / Blue
96 x 64 / Green
96 x 64 / Red
96 x 64 / White
96 x 64 / Blue
96 x 62 / Blue & Area Color
96(RGB) x 64 / 65K Color
128 x 64 / Blue & Yellow
128 x 64 / Red & Red
128 x 64 / White & White
160(RGB) x 128 / 65K Color
160(RGB) x 128 / 262K Color
DISPLAY FORMAT / COLORS
21.74 x 15.02
21.17 x 15.02
21.18 x 15.02
21.18 x 15.02
21.172 x 15.024
21.172 x 15.024
21.172 x 15.024
21.172 x 15.024
21.17 x 15.02
21.17 x 15.02
21.74 x 15.02
26.0 x 13.66
26.0 x 13.66
26.0 x 13.66
38.42 x 28.82
32.8 x 24.6
VIEWING AREA
( Width x Height )
SEPS104T1A
SH1101A-TCP03
SSD1303T9
SH1101A-TCP09
SH1101A-TCP03
SH1101A-TCP03
SH1101A-TCP03
SH1101A-TCP03
SSD1303T3
SSD1303T3
LDS514-T20
SH1101B
SH1101B
SH1101B
LGDP4216
LGDP4216A
BUILT-IN CONTROLLER
LSI OR EQUIV
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
REFERENCE PAGE
MC161-1
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
9
MC161-2
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
10
MC161-4
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
11
MC162-1
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
12
MC162-2
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
13
MC162-3
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
14
MC162-4
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
15
MC162-8
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
16
MC162-9
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
17
MC162-14
• EXTERNAL DIMENSIONS :
PLASTIC FILM
PLASTIC FILM
• BLOCK DIAGRAM :
18
MC162-15
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
19
MC162-16
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
20
MC162-17
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
~
21
MC164-2
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
22
MC202-1
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
23
MC204-1
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
24
MC204-2
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
25
MC204-31
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
26
MC242-1
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
27
MC401-1
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
28
MC402-1
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
29
MC404-1
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
30
MC404-10
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
31
MG11264-1
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
32
MG12064-1
• EXTERNAL DIMENSIONS :
• PIN ASSIGNMENT :
IC DRIVER : KS0713TB-01
33
MG12232-3
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
34
MG12232-10
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
35
MG12232-11
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
36
MG12232-61
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
37
MG12864-1
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
38
MG12864-2
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
39
MG12864-4
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
40
MG12864-5
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
41
MG12864-6
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
42
MG12864-7
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
43
MG12864-8
• EXTERNAL DIMENSIONS :
• PIN ASSIGNMENT :
IC DRIVER : KS0713TB-01
44
MG12864-10
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
45
MG12864-11
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : KS0713
46
MG12864-12
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
47
MG12864-15
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
48
MG12864-23
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
49
MG12864-24
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
50
MG12864-27
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
51
MG12864-28
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
NOTES: 1. OPERATING TEMPERATURE –20˚C TO 70˚C
STORAGE TEMPERATURE
–30˚C TO 80˚C
2. POLARIZER TYPE: STN
3. IC DRICER: SPLC501C
52
MG12864-32
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
53
MG12864-151
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
54
MG128128-1
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
55
MG128128-2
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
56
MG128128-58
• EXTERNAL DIMENSIONS :
• PIN ASSIGNMENT :
IC DRIVER : UC1610IGAB
57
MG128128-141
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
58
MG13265-3
• EXTERNAL DIMENSIONS :
• PIN ASSIGNMENT :
IC DRIVER: KS0713UM-L0CC
59
MG160160-7
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER: EK7011CG
60
MG160240-2
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
61
MG160240-3
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
62
MG160240-6
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
3.IC DRIVER: EK7010; EK7011
63
MG19264-1
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
64
MG19264-2
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
65
MG19264-3
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
66
MG19264-5
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
67
MG19264-8
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
68
MG19264-61
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
69
MG19264-70
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
3.IC Driver: S6B0107, S6B0108
70
MG19264-71
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
3.IC Driver: S6B0107, S6B0108
71
MG24064-13
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
72
MG24064-21
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
73
MG240128-7
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
74
MG240128-11
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
75
MG240128-51
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
76
MG240128-52
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
77
MG240160-1
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
78
MG240160-1(ch)
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
79
MG240160-2
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
80
MG240320-4
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
81
MG320240-4
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
82
MG320240-10
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER: NT7701F3
NT7702F4
83
MG320240-11
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
84
MG320240-13
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER: SSD1870, SSD1882
85
MG320240-14
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
86
MG320240-19
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
87
MG320240-20
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
88
MG320240-22
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
89
MG320240-23
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
90
MG320240-29
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
91
MG320240-30
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
92
MG320240-100TP
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
93
MG320240-100QR
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
94
MG320240-211(ch)
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
95
MG320240-212
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : NT7701, NT7702
96
MG320240-213
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : NT7701, NT7702
97
MG320240-214
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
98
MG320240-261
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
99
MG320240-271
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
100
MG320240-272
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
101
MG320240-370
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : NT7701, NT7702
102
MG320240-371
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : NT7701, NT7702
103
MG48064-1
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
104
MG480320-1
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
105
MG640480-2
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : LH1532F; LH1542F
106
MCG160120-1
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
107
MCG240320-2
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
108
MCG240320-21
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : IST3032TA0; IST3033CA1
109
MCG320240-15
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
110
MCG320240-28
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : NT7702; NT7701
111
MCG320240-31
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
112
MCG320240-33
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
113
MCG320240-47
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
114
MCG320240-151
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
115
MCG320240-281
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
116
MCG320240-282
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
117
MCG320240-283
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
118
MCG480320-2
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
119
TFT128160-37
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
120
TFT240320-8
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
121
TFT240320-26
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : R61505
122
TFT320234-1
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
123
TFT320240-32
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : HX8206B / HX8615A
124
TFT320240-43
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
125
TFT320240-48
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
126
TFT320240-50
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
127
TFT320240-62
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
128
TFT400234-2
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
129
TFT400234-3
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
130
TFT400240-1
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
131
TFT480234-2
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
132
TFT480234-3
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
133
TFT480234-4
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : HX8206B / HX8615A
134
TFT480234-5
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
135
TFT480234-9
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : NT3947 / NT39324
136
TFT480234-15
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : NT3947 / NT39324
137
TFT480272-2
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : HX8655 + HX8227
138
TFT480272-3
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
139
TFT800480-4
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
140
TFT800480-7
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
141
TFT800480-8
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
142
TFT800480-10
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
143
TS043-AFGF-29
• EXTERNAL DIMENSIONS :
144
TS045-AFGF-28
• EXTERNAL DIMENSIONS :
145
TS061-AFGF-58
• EXTERNAL DIMENSIONS :
146
TS078-AFGF-34
• EXTERNAL DIMENSIONS :
147
TS085-AFGF-19
• EXTERNAL DIMENSIONS :
148
TS096-AFGF-18
• EXTERNAL DIMENSIONS :
149
TS138-AFGF-23
• EXTERNAL DIMENSIONS :
150
TS164-AFGF-22
• EXTERNAL DIMENSIONS :
151
TS245-AFGF-58
• EXTERNAL DIMENSIONS :
152
TS289-AFGF-58
• EXTERNAL DIMENSIONS :
153
TS302-AFGF-32
• EXTERNAL DIMENSIONS :
154
TS303-AFGF-41
• EXTERNAL DIMENSIONS :
155
CM1180A030SF
• EXTERNAL DIMENSIONS :
• MODULE SPECIFICATION :
• PIN ASSIGNMENT :
156
CM1228O030SF
• EXTERNAL DIMENSIONS :
• MODULE SPECIFICATION :
• PIN ASSIGNMENT :
157
CM1275B030SF
• EXTERNAL DIMENSIONS :
• MODULE SPECIFICATION :
• PIN ASSIGNMENT :
158
CM1327B030SF
• EXTERNAL DIMENSIONS :
• MODULE SPECIFICATION :
• PIN ASSIGNMENT :
159
CM1344B030SF
• EXTERNAL DIMENSIONS :
• MODULE SPECIFICATION :
• PIN ASSIGNMENT :
160
CM1364B030SF
• EXTERNAL DIMENSIONS :
• MODULE SPECIFICATION :
• PIN ASSIGNMENT :
161
CM1434B030SF-E
• EXTERNAL DIMENSIONS :
• MODULE SPECIFICATION :
• PIN ASSIGNMENT :
162
CM1480A030SF
• EXTERNAL DIMENSIONS :
• MODULE SPECIFICATION :
• PIN ASSIGNMENT :
163
CM1009B130SF
• EXTERNAL DIMENSIONS :
• MODULE SPECIFICATION :
• PIN ASSIGNMENT :
164
CM1066O130SF
• EXTERNAL DIMENSIONS :
• MODULE SPECIFICATION :
• PIN ASSIGNMENT :
165
CM1176O130SF
• EXTERNAL DIMENSIONS :
• MODULE SPECIFICATION :
• PIN ASSIGNMENT :
166
CM1208A130SF
• EXTERNAL DIMENSIONS :
• MODULE SPECIFICATION :
• PIN ASSIGNMENT :
167
CM1323A200SF
• EXTERNAL DIMENSIONS :
• MODULE SPECIFICATION :
• PIN ASSIGNMENT :
168
CM1360A200SF
• EXTERNAL DIMENSIONS :
• MODULE SPECIFICATION :
• PIN ASSIGNMENT :
169
TOD9M002-L3QR
• EXTERNAL DIMENSIONS :
• PIN ASSIGNMENT :
IC DRIVER : SEPS104T1A
170
TOD9M003-A2QR
• EXTERNAL DIMENSIONS :
• PIN ASSIGNMENT :
IC DRIVER : SH1101A-TCP03
171
TOD9M004-A3QR
• EXTERNAL DIMENSIONS :
• PIN ASSIGNMENT :
IC DRIVER : SSD1303T9
172
TOD9M005-A3QR
• EXTERNAL DIMENSIONS :
• PIN ASSIGNMENT :
IC DRIVER : SH1101A-TCP09
173
TOD9M007-BQR
• EXTERNAL DIMENSIONS :
• PIN ASSIGNMENT :
IC DRIVER : SH1101A-TCP03
174
TOD9M007-GQR
• EXTERNAL DIMENSIONS :
• PIN ASSIGNMENT :
IC DRIVER : SH1101A-TCP03
175
TOD9M007-RQR
• EXTERNAL DIMENSIONS :
• PIN ASSIGNMENT :
IC DRIVER : SH1101A-TCP03
176
TOD9M007-WQR
• EXTERNAL DIMENSIONS :
• PIN ASSIGNMENT :
IC DRIVER : SH1101A-TCP03
177
TOD9M008-BQR
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : SSD1303T3
178
TOD9M0010-A3QR
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : SSD1303T3
179
TOD9M0014-L3QR
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : LDS514-T20
180
TOD9M0018-A2QR
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : SH1101B
181
TOD9M0018-RQR
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : SH1101B
182
TOD9M0018-WQR
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : SH1101B
183
TOD9M5006-L4QR
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
COF IC DRIVER : LGDP4216
184
TOD9M5007-4QR
• EXTERNAL DIMENSIONS :
• BLOCK DIAGRAM :
IC DRIVER : LGDP4216A
185
MONOCHROME OPTICAL CHARACTERISTICS
Note 1. Definition of
Viewing Angle
Note 2. Definition of
Contrast Ratio “K”
K=
Viewing Angle (all LCDs)
Right
B2
Viewing
Surface
ø
Bottom
Non-selected state
B1
Set point driving voltage
Bottom
Viewing Angle
Tr
Set point
Rise time
10%
ø
Brightness curve for
non-selected segment
90%
θ
100%
θ
Brightness curve for
selected segment
Brightness (%)
Top
Viewing Angle
Top
Brightness of non-selected segment (B 2 )
Brightness of selected segment (B 1 )
Brightness
Left
Note 3. Definition of Optical
Response Time
Tf
Fall time
Note : Select either top or bottom viewing angle.
For TN Display Modules
Item
Symbol
Test Condition
θ
Ø
K
Tr
Tf
Ø = 20° θ = 0°
Ø = 0° θ = 0°
Ø = 0° θ = 0°
Symbol
Test Condition
Viewing Angle
Contrast Ratio
Response Time (rise)
Response Time (fall)
K = 1.4
Standard Value
Min.
Typ .
Max.
30
–
2.5
–
–
–
–
4
150
150
–
30
–
250
250
Unit
Notes to see
degree
degree
–
ms
ms
1, 2
1, 2
1, 2
3
3
Unit
Notes to see
degree
degree
–
ms
ms
1, 2
1, 2
1, 2
3
3
Unit
Notes to see
degree
degree
–
ms
ms
1, 2
1, 2
1, 2
3
3
For STN Display Modules
Item
θ
Ø
K
Tr
Tf
Ø = 0° θ = 0°
Ø = 0° θ = 0°
Ø = 0° θ = 0°
Symbol
Test Condition
Viewing Angle
Contrast Ratio
Response Time (rise)
Response Time (fall)
K = 2.0
Standard Value
Min.
Typ .
Max.
50
–
4
–
–
–
–
7
150
150
–
±40
–
250
250
For FSTN Display Modules
Item
Viewing Angle
Contrast Ratio
Response Time (rise)
Response Time (fall)
θ
Ø
K
Tr
Tf
K = 2.5
Ø = 0° θ = 0°
Ø = 0° θ = 0°
Ø = 0° θ = 0°
186
Standard Value
Min.
Typ .
Max.
50
–
7
–
–
–
–
10
150
150
–
±40
–
250
250
MONOCHROME OPTICAL CHARACTERISTICS
STN LCD
Principles
The following features are available STN mode:
• High contrast, wide viewing angle.
• Assurance of vertical viewing angle of display.
This technology has come to be widely used in the last several years, because it permits the use
of the existing process and makes it possible to obtain a high picture quality at low cost.
Equi-Contrast Distribution Curve TN vs STN
Angular Scan: Contrast-Ratio
Angular Scan: Contrast-Ratio
90
90
120
120
60
60
1
Ph
1
Ph
150
150
30
20
40
Theta
60
210
20
40
330
240
300
Theta
60
210
330
240
30
300
270
270
TN
STN
FSTN LCD
Features
• Clear and legible black and white display.
• High contrast and wide viewing angle at a high multiplex drive.
• Up to VGA resolution.
• Small temperature dependency of background color.
• Contrast of B/W display is approximately three times higher than STN.
Principles
This technology is achieved by adding an optical retardation film to LC cell. The same driving
method as STN is used.
Equi-Contrast Distribution Curve
Contrast vs. Viewing Angle
Angular Scan: Contrast-Ratio
CR
90
120
15
60
150
30
10
20
40
60
B&W
Super TN
Theta
5
210
330
240
–30
300
–20
–10
0
10
270
Viewing Angle ( )
187
20
30 (deg)
TECHNICAL ISSUES
LCD PANEL
Features
• Low driving voltage, low power dissipation (0.2 ~ 2µA/[email protected]).
• Compact and thin structure.
• Custom artwork designs.
• Sunlight readable.
Viewing Modes
Reflective Type
Transflective Type
Light source
Light source
Reflected light
Reflected light
Transmitted
light
Reflective Rear
Polarizer
Transmissive Type
Backlight
light
Transmitted
light
Backlight
light
Transflective
Rear Polarizer
Transmissive
Rear Polarizer
Positive Type
Negative Type
Positive type display requires
no backlighting.
Negative type display requires
backlighting.
LCD Modes
LCD
MODE
COLOR
MODE
DOT
COLOR
BACKGROUND
COLOR
STRUCTURE
Polarizer
TN
–
Black
Gray
STN
Yellow
Gray
Blue
Dark Blue
Medium Blue
White
Yellow-Green
Blue-Gray
Dark Blue
FSTN
–
Black
White
Polarizer
Glass
Twist angle 90°
Polarizer
Polarizer
Polarizer
Polarizer
188
LC
STN Cell
Twist angle 180° to 240°
Compensation Film
STN Cell
LCD MOUNTING METHODS
The following interfaces are available for connecting the LCD to the drive circuit :
Rubber Connector
LCD MOUNTING METHOD
Rubber Connector
• Structure :
Alternate Lamination of Conductive Rubber
and Insulating Rubber.
Spacer
(in case of separate polarizer)
LCD
Polarizer
• Connecting Method :
Bezel (plastic, metal)
Mechanical Compression.
PCB
• Pitch (mm) :
Polarizer
Min 0.5
• Easy to assemble.
• Long Life.
• Wide Range of Applications.
Pin Connector
LCD MOUNTING METHOD
Pin Connector
• Structure :
Metal Pins Fit onto the Panel Pad.
Polarizer
LCD
• Connecting Method :
Soldering.
Pins
• Pitch (mm) :
PCB
1.27, 1.5, 1.8, 1.905, 2.0, 2.54
Polarizer
• Stable.
• Suitable for small production runs.
Flexible Connector
LCD MOUNTING METHOD (example)
Flexible Connector
• Structure :
Electroconductive thin film.
Polarizer
• Connecting Method :
PCB
Heat and Pressure Fitting, Soldering
or Mechanical Compression.
Flexible connector
• Pitch (mm) :
Polarizer
LCD
Heat Seal : Min 0.2, Soldering : Min 0.7
• Low Profile.
• Bending Flexibility
189
PRODUCTION PROCESSES
COG Structure
Chip On Glass
LCD
Polarizer
ACF
Connecting Method :
FPC
Heat and pressure fitting (ACF),
Heatseal, Fpc, Rubber, Socket or Pin.
Polarizer
IC
• Enables high resolution display.
• Saves mounting space.
• Can achieve a Low Profile Structure.
TAB Structure
Tape Automated Bonding / Tape Carrier Package
(with driver)
Polarizer
Connecting Method :
LCD
IC
Heat and pressure fitting (ACF) or Soldering.
PCB
Mold
Polarizer
ACF
• Enables high resolution display.
• Can achieve a Low Profile Structure.
COF Structure
Chip-On-Film
LCD
Polarizer
IC
Componets
Connecting Method :
Heat and pressure fitting (ACF),
Soldering, Mechanical Compression,
Plug in with Adjoining Socket or Heat
and Pressure Fitting (ACF).
PCB
Polarizer
ACF
•
•
•
•
•
190
Desired design for LCD with FPC.
Enables high resolution display.
Saves mounting space.
Can achieve a Low Profile Structure.
Fine bending flexibility.
BACKLIGHTS FOR LCD MODULES
EL
Features
• Max 1.3mm thickness (Max 1.5mm for lead portion).
• Wide driving condition of 60 – 1,000Hz and 150V AC Max. with inverter; step-up voltage from
1.5V battery is available.
• Emitted colors are blue-green and white.
• Life : 3K ~ 8K Hours.
Electrical Characteristics
• Voltage vs. Current Density
2
150
400Hz
100
50
Power Consumption
10
10
1kHz
08
08
06
06
04
04
400
Hz
02
50Hz
0
50
100
Ambient Condition : 50°C 90% RH
Initial Brightness Ratio (%)
Current Density (mA/cm )
200
Brightness
1kHz
Current Density
2
1kHz
Power Consumption (mW/cm )
• Voltage vs. Brightness
Life Characteristics
Constant Voltage/Frequency Drive
100
100V / 50Hz
50
100V / 400Hz
100V / 700Hz
02
150Hz
0
150
50
Voltage (Vrms)
100
150
Inverter Drive
0
0
100
200
300
Voltage (Vrms)
LED
Features
•
•
•
•
Low voltage driving (DC) is available without inverter.
Life: 100,000 hours (average).
No noise.
Various colors.
Electrical Characteristics (Reference Data)
• Forward Current Derating Curve
• Wave Length vs. Relative Light Intensity
100%
Relative Light
Intensity (%)
Forward Current (IF)
100
L
A
L ...... Yellowgreen
A ...... Amber
50
20%
– 20
25
0
70°C
520 540 560 580 600 620 640 660 680 700
Wave Length (mm)
Note : The above spec. are only for reference
191
400
500
Time (h)
BACKLIGHTS FOR LCD MODULES
Cold Cathode Fluorescent Lamp
Features
•
•
•
•
Hight brightness of 3,000-4,000cd/m2
OE lamp and AE lamp show good results in color enhancement
Life: 20,000 hours
Low heat generation when operating at rated lamp current of 5-20mA
Electrical Characteristics (Reference Data)
• Temperature Characteristics Curve
9
10
• Spectrum
5
6
7
8
150%
B
W
EZ
2
3
4
100
1
50
0
B.......Brightness
W......Power Consumption
EZ.....Breakdown Voltage
400 420 440 460 480 500 520 540 560 580 600 620 640 660 680 700
Wave Length (nm)
0
CCFL Backlight
–10
0
10
20
30
40
50°C
CCFL backlight provides two to three times the luminance of an EL backlight.
• Outline
Characteristics
Direct Lighting
Edge Lighting
Remarks
1
Luminescent Color
White
White
2
Luminance
Approx 100 nt typ.
Approx 60 nt typ.
3
Thickness (Unit base)
24.2mm max.
14mm max.
4
Operating Voltage
1,500 Vrms AC max.
1,500 Vrms AC max.
5
Power Consumption
Approx 3 to 6 W
(including inverter)
Approx 3.4W (CCFL only)
CCFL : 2 pcs.
Approx 3 to 6 W
(including inverter)
Approx 3.4W (CCFL only)
CCFL : 2 pcs.
To lower the power consumption,
improve the efficiency of inverter
design.
6
Life
20,000 hours (IL = 5mA)
10,000 hours (IL = 5mA)
Continuous operation
The definition of life differs by each
MFR’s spec.
Note : The above spec. is for reference only.
• Sectional View
Electrode
Glass
• Sectional View of The LCD Unit
Direct lighting method (Example)
Fluorescent substance
TAB LSI
Plastic chassis
Visible light
LCD panel
Scattering sheet
Chassis
CCFL
Edge lighting method (Example)
CCFL
LCD panel
Chassis
CCFL
Scattering sheet
192
Reflection sheet
Light guide
BASIC INSTRUCTIONS FOR CHARACTER LCD MODULES
Interface Pin Connections
Pin No.
Symbol
Level
Pin Description
Functions
1
2
3
VSS
VDD
VO
—
—
—
4
RS
H/L
Ground
Supply voltage for logic and LCD(+)
Supply voltage for LCD
Register selection
5
R/W
H/L
1
1
1
1
1
1
1
1
1
1
1
E
DB0
DB1
DB2
DB3
DB4
DB5
DB6
DB7
LED +
LED –
H, H➝L
H/L
H/L
H/L
H/L
H/L
H/L
H/L
H/L
0V
5V ± 5%
Decision by user system
H : Data
L : Instruction code
H : Read
L : Write
—
Read / Write
Enable signal
Data bit 0
Data bit 1
Data bit 2
Data bit 3
Data bit 4
Data bit 5
Data bit 6
Data bit 7
8 bits
4 bits
LED Backlight
Interface Timing
Write Operation
V1H1
V1L1
RS
tAS
RW
V1L1
V1H1
V1L1
V1H1
V1L1
tDSW
tEr
DB0~DB7
RS
V1H1
V1L1
R/W
V1L1
tAH
PWEH
E
Read Operation
V1H1
V1L1
tAH
tEr
tAS
V1L1
tAH
V1L1
PWEH
V1L1
E
tH
V1H1
V1L1
V1H1
V1L1
V1H1
V1L1
V1H1
V1L1
tEr
DB0~DB7
V1H1
V1L1
tDDR
V0H1
V0L1
teyeE
tAH
tEr
V1L1
tDHR
Valid data
V0H1
V0L1
teyeE
Standard Value
Symbol Measuring
Unit
conditions Min
Max
Enable cycle time
teyeE
800
–
ns
Enable pulse
PWEH
450
–
ns
width “High” Level
Standard Value
Symbol Measuring
Unit
conditions Min
Max
Enable cycle time
teyeE
800
–
ns
Enable pulse
PWEH
450
–
ns
width “High” Level
Enable rise time
Enable decay time
tEr
tEr
Address set-up
time RS.R/W-E
tAS
Address hold time
Data set-up time
Data hold time
tAH
tDSW
tH
Item
As shown
above
Item
–
25
ns
Enable rise time
Enable decay time
tEr
tEr
140
–
ns
Address set-up
time RS.R/W-E
tAS
10
195
10
*
320
–
ns
ns
ns
Address hold time
Data set-up time
Data hold time
tAH
tDDR
tDHR
193
As shown
above
–
25
ns
140
–
ns
10
–
20
–
320
–
ns
ns
ns
BASIC INSTRUCTIONS FOR CHARACTER LCD MODULES
Initialization Procedure
8 bit interface
4 bit interface
POWER ON
POWER ON
Wait 20ms or more after VDD reaches 4.5V
Wait 15ms or more after VDD
reaches 4.5V
Function set : 8 bit
Busy flag can be checked
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
0
0
0
0
1
1
*
*
*
*
Wait 4.1ms or more
RS R/W DB7 DB6 DB5 DB4
0
0
0
0
1
1
Wait 4.1ms or more
Function set : 8 bit
Busy flag can be checked
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
0
0
0
0
1
1
*
*
*
*
Wait 100µs or more
RS R/W DB7 DB6 DB5 DB4
0
0
0
0
1
1
Wait 100µs or more
Function set : 8 bit
Busy flag can be checked
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
0
0
0
0
1
1
*
*
*
*
RS R/W DB7 DB6 DB5 DB4
0
0
0
0
1
1
Function set : 4 bit
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
0
0
0
0
1
1
N
F
*
*
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
1
I/D
S
RS R/W DB7 DB6 DB5 DB4
0
0
0
0
1
0
0
0
0
0
1
0
0
0
N
F
*
*
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
1
I/D
1
Function set
Display off
Display clear
Entry mode set
End of Initialization
# The busy flag cannot be checked until this point is reached, if the busy flag is not checked at all,
the time should be longer than the total execution time of these instructions.
Module Interface to Power Supply
End of Initialization
Single power
Dual power
+5V
VDD
VDD–VO
LCM
VO
VSS
+5V
VDD
VDD
VDD–VO
VDD
VR
LCM
VO
VSS
GND
VDD ~ VO : Operating Voltage for LCD
VR : 10k ~ 20k
VR
VEE
GND
VDD ~ VO : Operating Voltage for LCD
VR : 10k ~ 20k
Module Interface to MPU
8051 CPU
LCD MODULE
RD
A15
A14
A13
ADDRESS
DECODER
AD7
R/W
A0
ADDRESS A1
LATCH
E
Ø2
ALE
AD0
LCD MODULE
VmA
E
WR
A15
A14
A13
6800 CPU
R/S
R/W
D0
D7
A0
D0
D7
194
ADDRESS
DECODER
R/W
D0
D7
R/S
BASIC INSTRUCTIONS FOR CHARACTER LCD MODULES
INSTRUCTION SET
Instructions
Code
Description
RS R/W DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0
Clear display
0
0
0
0
0
0
0
0
0
1
Cursor
at home
0
0
0
0
0
0
0
0
1
*
Entry mode set
0
0
0
0
0
0
0
1
1/D
S
Display ON/OFF
control
0
0
0
0
0
0
1
D
C
B
Cursor /
display shift
0
0
0
0
0
1
S/C
R/L
*
*
Function set
0
0
0
0
1
DL
N
F
*
*
CGRAM
address set
0
0
0
1
DDRAM
address set
0
0
1
ADD
Busy flag
0
0
BF
AC
CGRAM/DDRAM
data write
1
0
CGRAM/DDRAM
data read
1
1
I/D
I/D
S
S/C
S/C
R/L
R/L
DL
DL
N
N
F
F
BF
BF
Cursor is resumed to home Position
(address 0) after entire display clear
Execution time Execution time
(fosc = 250KHz) (fosc = 160KHz)
82µs ~ 1.64ms
120µs ~ 4.9ms
Cursor is resumed to home Position
(address 0).
Shifted display is also returned to
the original position. Contents of
DDRAM are not changed
40µs ~ 1.6ms
120µs ~ 4.8ms
Cursor advance direction and
display shift are set.
These operations are performed
during data write and read modes
40µs
120µs
Entire display ON/OFF (D), cursor
ON/OFF (C) and character blink (B)
at cursor position are set.
40µs
120µs
Cursor and display are shifted
without changing the contents of
DDRAM
40µs
120µs
Interface data length (DL), number
of display lines (N) and character
font (F) are set.
40µs
120µs
CGRAM address is set.
Transmitted and received after this
are the data of CGRAM.
40µs
120µs
DDRAM address is set.
Transmitted and received after this
are the data of DDRAM.
40µs
120µs
Busy flag (BF) showing internal
operation and contents of address
counter are read.
1µs
1µs
Write Data
Data are written in DDRAM or
CGRAM
40µs
120µs
Read Data
Data are read out of DDRAM or
CGRAM
40µs
120µs
Acc
= 1 : Increment (+1)
= 0 : Decrement (–1)
= 1 : With display shift
= 1 : With display shift
= 0 : Cursor movement
= 1 : Shift to the right
= 0 : Shift to the left
= 1 : 8 bits
= 0 : 4 bits
= 1 : 2 lines
= 0 : 1 line
= 1.5 x 10 dots
= 0.5 x 7 dots
= 1 : Internal operation is being performed
= 0 : Instruction acceptable
DDRAM : Display data RAM
CGRAM : Character Generator
RAM
ACC : Address of CGRAM
ADD : Address of DDRAM
These correspond to
cursor address.
AC : Address counter used for
both DDRAM and
CGRAM.
195
Execution time changes with
change in internal oscillation
frequency (fosc).
(Ex.) When fosc = 270KHz.
40µs x 250 = 37µs
270
BASIC INSTRUCTIONS FOR CHARACTER LCD MODULES
Character modules with built in controllers and Character Generator (CG) ROM & RAM will display 96 ASCII and special
characters in a dot matrix format. Then first 16 locations are occupied by the character generator RAM. These locations
can loaded with the user designed symbols and displayed along with the characters stored in the CG ROM.
CHARACTER MODULE FONT TABLE (Standard Font)
Character Font Table
LOWER
4 BITS
UPPER
4 BITS
0000
0000
CG RAM
0001
(2)
0010
(3)
0011
(4)
0100
(5)
0101
(6)
0110
(7)
0111
(8)
1000
(1)
1001
(2)
1010
(3)
1011
(4)
1100
(5)
1101
(6)
1110
(7)
1111
(8)
0010
0011
0100
0101
0110
(1)
196
0111
1010
1011
1100
1101
1110
1111
BASIC INSTRUCTIONS FOR CHARACTER LCD MODULES
CHARACTER MODULE FONT TABLE (European Font)
Character Font Table
UPPER
4 BITS
LOWER
4 BITS
0000
0000 0010 0011 0100 0101 0110 0111 1000 1001 1010 1011 1100 1101 1110 1111
CG RAM
(1)
0001
(2)
0010
(3)
0011
(4)
0100
(5)
0101
(6)
0110
(7)
0111
(8)
1000
(1)
1001
(2)
1010
(3)
1011
(4)
1100
(5)
1101
(6)
1110
(7)
1111
(8)
197
MONOCHROME RELIABILITY CRITERIA
TN Type
Horizontal Ø
VIEWING
ANGLE
Vertical θ (min)
Operating Temperature
Normal
Temperature
Wide
Temperature
Normal
Temperature
Wide
Temperature
± 30°
± 30°
± 30°
± 30°
10° to 30°
10° to 30°
–10°C to 70°C
–20 °C to 80°C
Storage Temperature
STN Type
–10° to 40°
–10° to 40°
–25°C to 80°C
0°C to 50°C
–20°C to 70°C
–35 °C to 90°C
–20 °C to 70°C
–30 °C to 80°C
High Temperature (Power Off)
240 Hours @ 70°C
Low Temperature (Power Off)
240 Hours @ –20°C 240 Hours @ –35°C
240 Hours @ –15 °C 240 Hours @ –25°C
High Temperature (Power On)
240 Hours @ 70°C
240 Hours @ 80°C
240 Hours @ 60°C
240 Hours @ 70°C
Low Temperature (Power On)
240 Hours @ –10°C
240 Hours @ –25°C
240 Hours @ –10°C
240 Hours @ –20°C
55°C/90%RH
240 Hours
75°C/90%RH
240 Hours
45°C/90%RH
240 Hours
65°C/90%RH
240 Hours
A
60 Min @ –20°C
60 Min @ –35°C
60 Min @ –20°C
60 Min @ –30°C
B
5 Min @ 25°C
5 Min @ 25°C
5 Min @ 25°C
25 Min @ 25°C
C
60 Min @ 70°C
60 Min @ 90°C
60 Min @ 70°C
60 Min @ 80°C
50,000 Hours
50,000 Hours
50,000 Hours
50,000 Hours
High Temperature &
High Humidity
C
Thermal Shock
5 Cycles
B
A
Expected Life
240 Hours @ 90°C
240 Hours @ 65°C
240 Hours @ 75°C
Wide temp. version may not be available for some products. Please consult our sales engineer or representative.
MONOCHROME ABSOLUTE MAXIMUM RATINGS
For Character Display Modules
Item
Supply Voltage for Logic
Supply Voltage for LCD
Input Voltage
Operating Temperature
Storage Temperature
Symbol
VDD–VSS
VDD–VEE
VI
Topr
Tstg
Test Condition
Standard Value
Min.
Max.
0
0
VSS
0
-10
Ta =25°C
–
–
7.0
6.5
VDD
50
60
Unit
V
V
V
°C
°C
For Graphic Display Modules
Item
Supply Voltage for Logic
Supply Voltage for LCD
Input Voltage
Operating Temperature
Storage Temperature
Symbol
VDD–VSS
VDD–VEE
VI
Topr
Tstg
198
Test Condition
Standard Value
Min.
Max.
Refer to individual spec.
Unit
V
V
V
°C
°C
RELIABILITY TEST DATA
Color STN (CSTN) :
Item
Condition
Operation life time
100000 Hours
High temperature (storage)
80°C x 480 Hours
Low temperature (storage)
–30°C x 480 Hours
High temperature high humidity (storage)
60°C x 90% RH x 480 Hours
B
Cold-Hot rotation impact
One cycle A
A : –30°C x 30 minutes
B : 80°C x 30 minutes
Total : 20 cycles
OLED :
Item
Condition
Operation life time
8000 Hours
High temperature (storage)
70°C x 240 Hours
Low temperature (storage)
–30°C x 240 Hours
High temperature high humidity (storage)
50°C x 90% RH x 120 Hours
B
Cold-Hot rotation impact
One cycle A
A : –20°C x 30 minutes
B : 55°C x 30 minutes
Total : 10 cycles
TFT :
Item
Condition
Operation life time
100000 Hours
High temperature (storage)
80°C x 480 Hours
Low temperature (storage)
–30°C x 480 Hours
High temperature high humidity (storage)
60°C x 90% RH x 480 Hours
B
Cold-Hot rotation impact
One cycle A
199
A : –30°C x 30 minutes
B : 80°C x 30 minutes
Total : 20 cycles
RELIABILITY TEST DATA
Camera Module Reliability Criteria:
Item
Temperature
Operation temperature
–20°C ~ 70°C
Storage temperature
–30°C ~ 80°C
High temperature (Power Off)
80°C
Low temperature (Power Off)
–30°C
High temperature (Power ON)
70°C
Low temperature (Power ON)
–20°C
High temperature & High humidity
40°C / 90% RH, 48 Hours
C
Thermal Shock
10 Cycles
A : 30 Min @ –30°C
B : 5 Min @ 25°C
C : 30 Min @ 80°C
B
A
Compact Camera Module CCM:
Item
Temperature
High temperature storage
80˚C, 120 Hours
Low temperature storage
–30˚C, 120 Hours
High temperature operating
70˚C, 120 Hours
Low temperature operating
–20˚C, 120 Hours
High temperature & High humidity storage
60˚C, 90%RH, 120 Hours
High temperature & High humidity operating
40˚C, 90%RH, 48 Hours
Thermal shock (Power Off)
10 times
Thermal cycle (Power Off)
10 times
Vibration test (Packaged)
X, Y, Z directions for 3 Hours
Dropping test (Packaged)
Dropping height: 150cm
ESD test (Power Off)
10 times
Remark:
1. The resolution, TV Line, dimension and torsion test must be recorded within the specification.
2. No any detectable defect is allowed.
3. All details are defined in the engineering drawings and specifications.
4. All functional and cosmetic checking will be conducted before and after the reliability test
Touch Panel Reliability Criteria:
Item
Condition
Touch durability
More than 1 millions times at a single location. Note:1
Pen sliding
More than 100k stroke durability. Note:2
Humidity test
60˚C x 90%RH x 240 Hours
High temperature storage test
50˚C x 90%RH x 120 Hours
Low temperature storage test
–20˚C x 240 Hours
Thermal shock test
B
A
A:
–10˚C x 1 Hours
B:
60˚C x 1 Hours
Total : 20 cycles
Note:1 - Test Condition: Hitting Pad (tip R 3.75mm, Hardness 40, Silicone Rubber); Load 2.45N; Speed 2 time/sec;
Note:2 - Test Condition: Hitting Pad (tip R 0.8mm, Plastic Pen); Load 1N; Speed 60 mm/second.
General Characteristic:
Recomended Operation: 80g or less (Plastic Pen Tip R0.8mm or Silicone Rubber pen Tip R3.75mm Hardness 40 degree)
Terminal Resistance: Rx-x: A±150Ω; Ry-y: B±150Ω (A, B: values of particular touch panel design)
Linearity: Linearity Error ≤ 1.5% (Analog Type Touch Panel)
Insulation: 20MΩ or over (DC25V)
Chattering time: 20 msec or less @100kΩ pull-up
Transmittance ≥ 82% (l = 550nm)
200
PROPER USE OF LCD MODULES
Precaution for Handling LCD Modules
Liquid Crystal Display Modules
Since LCM has been assembled and adjusted with a high degree
of precision, avoid applying excessive shocks to the module or
making any alterations or modifications to it.
(1) Do not alter, modify or change the shape of the tab on the
metal frame.
(2) Do not make extra holes on the printed circuit board, modify
its shape or change the positions of components to be
attached.
(3) Do not damage or modify the pattern wiring on the printed
circuit board.
(4) Absolutely do not modify the zebra rubber strip (conductive
rubber) or touch it with another object.
(5) Except for soldering the interface, do not make any alterations
or modifications with a soldering iron.
(6) Do not drop, bend or twist LCM.
LCD is composed of glass and polarizer. Pay attention to the
following items when handling.
(1) Please keep the temperature within specified range for use
and storage. Polarization degradation, bubble generation or
polarizer peel-off may occur with high temperature and high
humidity.
(2) Do not touch, push or rub the exposed polarizers with
anything harder than an HB pencil lead (glass, tweezers,
etc.).
(3) N - hexane is recommended for cleaning the adhesives used
to attach front/rear polarizers and reflectors made of organic
substances which will be damaged by such chemicals as
acetone, toluene, ethanol and isopropylalcohol.
(4) When the display surface becomes dusty, wipe gently with
absorbent cotton or other soft material like chamois soaked
in petroleum benzine. Do not scrub hard to avoid damaging
the display surface.
(5) Wipe off saliva or water drops immediately. Contact with
water over a long period of time may cause deformation or
color fading.
(6) Avoid contacting oil and fats.
(7) Condensation on the surface and contact terminals due to
cold will damage, stain or dirty the polarizers. After products
are tested at low temperatures they must be warmed up in
a container before coming to contact with room temperature
air.
(8) Do not put or attach anything on the display area to avoid
leaving marks on it.
(9) Do not touch the display with bare hands. This will stain the
display area and degrade insulation between terminals.
(Some cosmetics are detrimental to the polarizers).
(10) As glass is fragile, it tends to become chipped during
handling especially on the edges. Please avoid dropping or
jarring.
Electro-Static Discharge Control
Since this module uses a CMOS LSI, the same careful attention
should be paid to electrostatic discharge as for an ordinary CMOS
IC.
(1) Make certain that you are grounded when handling LCM.
(2) Before removing LCM from its packing case or incorporating
it into a set, be sure that the module and your body have the
same electric potential.
(3) When soldering the terminal of LCM, make certain that the
AC power source for the soldering iron does not leak.
(4) When using an electric screwdriver to attach LCM, the
screwdriver should be of ground potentiality to minimize as
much as possible any transmission of electromagnetic waves
produced sparks coming from the commutator of the motor.
(5) As far as possible make the electric potential of your work
clothes and that of the work bench the ground potential.
(6) To reduce the generation of static electricity be careful that
the air in the working environment is not too dry. (A relative
humidity of 50%–60% is recommended.)
Installing LCD Modules
The hole in the printed circuit board is used to fix LCM as shown
in the picture below. Attend to the following items when installing
the LCM.
(1) Cover the surface with a transparent protective plate to
protect the polarizer and LC cell.
Precaution for Soldering to the LCM
(1) Observe the following when soldering lead wire, connector
cable, etc., to the LCM.
• Soldering iron temperature : 280°C±10°C
• Soldering time : 3-4 sec.
• Solder ; eutectic solder
If soldering flux is used, be sure to remove any remaining flux
after finishing to soldering operation. (This does not apply
in the case of a non-halogen type of flux.) It is recommended
that you protect the LCD surface with a cover during
soldering to prevent any damage due to flux spatters.
(2) When soldering the electroluminescent panel and PC board,
the panel and board should not be detached more than
three times. This maximum number is determined by the
temperature and time conditions mentioned above, though
there may be some variance depending on the temperature
of the soldering iron.
(3) When removing the electroluminescent panel from the PC
board, be sure that the solder has completely melted, the
soldered pad on the PC board could be damaged.
Protective plate
Fitting plate
LCM
(2) When assembling the LCM into other equipment, the spacer
to the bit between the LCM and the fitting plate should have
enough height to avoid causing stress to the module surface.
Refer to the individual specifications for measurements. The
measurement tolerance should be ±0.1mm
201
LIQUID CRYSTAL DISPLAY HANDLING PROCEDURES
Liquid Crystal Display (LCD)
An LCD is made up of glass, organic sealant, organic fluid and polymer based polarizers. The following precautions
should be taken when handling:
(1) Keep the temperature within range for use and storage. Excessive temperature and humidity could cause
polarization degradation, polarizer peel-off or bubble generation. When storage for a long period over 40°C
is required, the relative humidity should be kept below 60%.
(2) Do not contact the exposed polarizers with anything harder than an HB pencil lead. To clean dust off the
display surface, wipe gently with cotton, chamois or other soft material soaked in petroleum benzine. Never
scrub hard.
(3) Wipe off saliva or water drops immediately. Contact with water over a long period of time may cause polarizer
deformation or color fading, while an active LCD with water condensation on its surface will cause corrosion
of ITO electrodes.
(4) PETROLEUM BENZINE is recommended to remove adhesives used to attach front/rear polarizer and reflectors,
while chemicals like acetone, toluene, ethanol and isopropyl alcohol will cause damage to the polarizer.
Avoid oil and fats. Avoid lacquer and epoxies which might contain solvents and hardeners to cause electrode
erosion. Some solvents will also soften the epoxy covering the DIL pins and thereby weaken the adhesion
of the epoxy on glass. This will cause the exposed electrodes to erode electro-chemically when operating in
high humidity and condensing environment.
(5) Glass can be easily chipped or cracked from rough handling, especially at corners and edges.
(6) Do not drive LCD with DC voltage.
(7) When soldering DIL pins, avoid excessive heat and keep soldering temperature between 260°C to 300°C
for no more than 5 seconds.
Operation
(1)
(2)
(3)
(4)
The viewing angle can be adjusted by varying the LCD driving voltage.
Driving voltage should be kept within specified range; excess voltage shortens display life.
Response time increases with decrease in temperature.
Display may turn black or dark blue at temperatures above its operational range, however, this is not
destructive and the display will return to normal once the temperature falls back to range.
(5) Mechanical disturbance during operation (such as pressing on the viewing area) may cause the segments
to appear “ fractured ”. They will recover once the display is turned off.
(6) Condensation at terminals will cause malfunction and possible electro-chemical reaction. Relative humidity
of the environment should therefore be kept below 60%.
Storage
(1) Store LCDs and modules in dark places and do not expose to sunlight or fluorescent light. Keep the
temperature between 0°C and 35°C and the relative humidity low.
(2) Modules should be kept in antistatic packaging. If properly sealed, there is no need for desiccant.
Safety
If any fluid leaks out of a damaged glass cell, wash off with soap and water any human part that comes into contact
with the fluid. Never swallow the fluid. The toxicity is extremely low but caution should be exercised at all times.
Limited Warranty
Unless otherwise agreed between TRULY and customer, TRULY will repair any of its LCDs functionally defective when
inspected in accordance with TRULY LCD acceptance standards (copies available upon request)for a period of one
year from date of shipments. Cosmetic/visual defects must be returned to TRULY within 90 days of shipment.
Confirmation of such date shall be based on freight documents. The warranty liability of TRULY is limited to repair
and/or replacement on the terms set forth above. TRULY will not be responsible for any subsequent or consequential
events.
Returning LCD under Warranty
No warranty can be granted if the precautions stated above have been disregarded. Broken glass, scratches on
polarizers, mechanical damage as well as defects that are caused by accelerated environmental tests are excluded
from warranty.
202
Precautions for Operation
Safety
(1) Viewing angle varies with the change of liquid crystal
driving voltage(V0).
Adjust V0 to show the best contrast.
(2) Driving an LCD in the voltage above the limit shortens its life.
(3) Response time is greatly delayed at temperatures below the
operating temperature range. The display area becomes dark
color at temperatures above this range. However, this does
not mean the LCD will be out of order, it will recover when
it returns to the specified temperature range.
(4) If the display area is pushed hard during operation, the
display will become abnormal. However, it will return to
normal if it is turned off and then back on.
(5) Condensation on terminals can cause an electrochemical
reaction disrupting the terminal circuit. Therefore, it must
be used in the relative condition of 40°C, 50% RH.
(6) when turning on power, input each signal after the positive /
negative voltage becomes stable.
(1) It is recommended to crush damaged or unnecessary LCDs
into pieces and wash them off with solvents such as acetone
and ethanol, which should later be burned.
(2) If any liquid leakes out of a damaged glass cell and comes in
contact with the hands, wash off thoroughly with soap and
water.
Limited Warranty
Unless otherwise agreed between TRULY and customer, TRULY will
replace or repair any of its LCD and modules which are found to
be functionally defective when inspected in accordance with TRULY
LCD acceptance standards ( copies available upon request ), for a
period of one year from date of shipments. Cosmetic/visual defects
must be returned to TRULY within 90 days of shipment.
Confirmation of such date be based on freight documents. The
warranty liability of TRULY is limited to repair and/or replacement
on the terms set forth above. TRULY will not be responsible for any
subsequent or consequential events.
1.5µs min.
Positive voltage
GND
0 min. 50 ms max.(For graphic)
GND
(Negative voltage)
0 min. 50 ms max.(For graphic)
GND
(Signal)
Return LCM under Warranty
No warranty can be granted if the precautions stated above have
been disregarded. A typical examples of violations are:
– broken LCD glass;
– PCB eyelet’s damaged or modified;
– PCB conductors damaged;
– circuit modified in any way, including addition of components;
– PCB tampered with by grinding, engraving or painting varnish;
– soldering to or modifying the bezel in any manner.
Module repairs will be invoiced to the customer upon mutual
agreement. Modules must be returned in antistatic packaging
together with sufficient description of the failures or defects. Any
connectors or cables installed by the customer must be removed
completely without damaging the PCB eyelet‘s, conductors and
terminals.
Storage
When storing LCDs as spares for some years, the following
precautions are necessary.
(1) Store them in a sealed polyethylene bag. If Properly sealed,
there’s no need for dessicant.
(2) Store them in a dark place, do not expose to sunlight or
fluorescent light. Keep the temperature between 0°C and
35°C.
(3) The polarizer surface should not come in contact with any
other object. (We advise you to store them in the container
in which they were shipped).
(4) Environmental conditions :
– Do not leave them for more than : 168 hrs. at 60°C.
– Should not be left for more than 48 hrs. at –20°C.
203
STANDARD LCD MODULE NUMBERING SYSTEM
M T C – C 16 1 D P L Y – 1 N – TP
1
2
3
4
5
1
LIQUID CRYSTAL DISPLAY MODULE
2
LCD TYPE
T – TN LCD
3
H – HTN LCD
8
S – STN LCD
9
10
11
F – FSTN
12
13
C – Color STN
G – Chip on glass
N – Without IC
C – Chip on board
T – TCP
LCD MODE
C – Characters
5
7
IC PACKING
P – Packing type
4
6
G – Graphic
Z – Other
LCD OF FUNCTION
Characters model : Number of characters
Graphic model
: Number of colum dots
6
LCD OF FUNCTION
Characters model : Number of lines
Graphic model
: Number of row dots
7
VIEWING ANGLE
U – Upper 12 o’ clock
D – Lower 6 o’ clock
8
3 o’ clock
9 o’ clock
Z – Others
COLOR MODE
HTN / TN : P – Positive
N – Negative
9
R – Right
L – Left
STN : G – Grey
Y – Yellow green
B – Blue
FSTN (F) : P – Positive
N – Negative type
CSTN : F – Negative / Tranflective
T – Negative / Transmissive
BACKLIGHT MODE
Without backlight : R – Reflective
F – Transflective
T – Transmissive
Blacklight : L
C
E
S
–
–
–
–
LED (Transflective)
CCFL (Transmissive)
EL (Transflective)
Side lit LED
10 BACKLIGHT COLOR
B – Blue
A – Amber
Y – Yellow green
R – Red
W – White
N – Without backlight
11 VERSION
12 TEMPERATURE
N – Normal temperature
W – Wide temperature
13 SPECIAL REMARKS
TP – With touch panel
204
S – Super wide temperature
Z – Others
STANDARD TFT LCD MODULE NUMBERING SYSTEM
TFT – G 320 240 D T S W – 48 W – TP – E
1
2
3
4
5
1
THIN FILM TRANSISTOR TFT LCD MODULE
2
LCD MODE
G – Graphic
3
6
7
8
9
10
11
Z – Other
DISPLAY FORMAT
Number of Column
4
DISPLAY FORMAT
Number of Row
5
VIEWING ANGLE
U – Upper 12 o’ clock
D – Lower 6 o’ clock
6
BACKLIGHT MODE
Blacklight : L – LED
C – CCFL
S – Side lit LED
BACKLIGHT COLOR
W – White
9
Z – Others
T – Transmissive
Without backlight : R – Reflective
F – Transflective
T – Transmissive
8
3 o’ clock
9 o’ clock
DISPLAY MODE
F – Transflective
7
R – Right
L – Left
N – Without backlight
VERSION
10 TEMPERATURE
N – Normal temperature
W – Wide temperature
S – Super wide temperature
11 SPECIAL REMARKS
TP – With touch panel
12 ROHS COMPLIANCE
E – ROHS Compliance
Blank – Non - ROHS Compliance
205
Z – Others
12
TOUCH PANEL NUMBERING SYSTEM
T T 001 – D F G H – 28 – S – EC – E
1
2
3
4
*1
T – Touch Panel
*1
T – Custom Design
*3
SERIES NUMBER
4
D – Digital
UPPER TYPE
O – Other
BOTTOM TYPE
F – Film
7
7
TOUCH PANEL TYPE
F – Film
6
6
S – Standard Production tooled by TRULY
A – Analog
5
5
G – Glass
CONNECTOR TYPE
H – Heat Seal
F – FPC
N – NA
8
DIAGONAL SIZE (ACTIVE AREA - AA)
9
MARKING MARK
S – PET
S1 – Glass Mark
Blank – NA
10 SPECIAL REMARK
EC – ESD Surface
11 PRODUCTOR FOR ROHS
E – ROHS Compliance
*
REMARK :
Blank – NA
1 + 2 + 3 can be used in Simplified Abbreviation.
206
8
9
10
11
CCM NUMBERING SYSTEM
CAMERA MODULE NUMBERING SYSTEM:
C M 1001 – A 030 S F –E
1
2
3
1
C: CAMERA MODULE
2
APPLICATION
A – Automotive
T – Toy
4
S – Security / Surveillance
P – PC
3
PRODUCT NO.: 1000-9999
4
LINKING MODE / OUTPUT MODE
4.1 Mobile Phone:
4.2 No Mobile Phone:
5
015 – 0.15M
300 – 3.0M
B – BTB
D – Digital Signals
7
030 – 0.3M
400 – 4.0M
B – COB
O – Others
O – Others (Analog & Digital)
130 – 1.3M
500 – 5.0M
O – others
FOCUS MODE
M – Macro Focus
A – Auto Focus
Z – Auto Zoom
PRODUCTOR FOR ROHS
–E – Having Rohs Requirement
Blank – No Requirement
CM FPC/PCB NAMING:
1
PRODUCT NO.
2
TYPE
F – FPC
1001
F
–A
1
–E
1
2
3
4
5
P – PCB
R – FPC & PCB
3
PRINCIPIUM VERSION
4
FPC/PCB LAYOUT VERSION
5
PRODUCTOR FOR ROHS
–E – Having Rohs Requirement
Blank – No Requirement
207
8
D – DSC
O – Others
IC PACKAGE
F – Fix Focus
8
M – Mobile Phone
E – Entertainment
A – ZIF
A – Analog Signals
S – CSP / CLCC IC Package, SMT
7
6
PIXEL CODE
010 – 0.1M
200 – 2.0M
6
5
CUSTOM DESIGN OLED NUMBERING SYSTEM
T O E 9M0005 G G P –W –G –P –C1 –A2 –2
1
2
3
4
5
1
TRULY SEMICONDUCTORS LTD.
2
PRODUCT TYPE
6
7
8
9
10
11
12
13
O – OLED
3
DUTY (RATIO): DUTY = 1/N
B – N ≤ 16
E – 64 < N ≤ 128
4
PRODUCT NO.
5
DISPLAY TYPE
G – Graphic (Default)
6
D – 32 < N ≤ 64
G – N > 240
C – Character
Z – Others
ENCAPSULATION
G – Glass Cap (Default)
7
C – 16 < N ≤ 32
F – 128 < N ≤ 240
M – Metal Cap
POLARIZER ATTACHED
P – Front Polarizer attached (Default)
8
N – Nil
OPERATING TEMPERATURE RANGE
W – Wide Temperature:
–20ºC ~ +70ºC (Default)
N – Normal Temperature:
–10ºC ~ +50ºC
S – Super Wide Temperature: –40ºC ~ +80ºC
The operation temperature range in the corresponding.
9
CONNECTING METHOD
T – TCP or COF (Default)
N – Panel
F – FRC
G – Clip on Glass (COG)
10 EDGE TREATMENT
BLANK – No polished no chamfer (Default)
P – Side polished
P1 – Chamfer
P - P1 – Side polished and chamfer
11 MARKING
BLANK
C1
C2
C3
–
–
–
–
No Marking
Print color on glass side
Outside ink screen on polarizer
Black MASK or INK screen between two glass
C4 – Mixed ink screen
C5 – Print mark on glass side
C6 – Print mark on polarizer
12 COLOR MODE
R – Red
G – Green
A2 – 2 area colors
L1 – 256 colors
B – Blue
O – Orange
A3 – 3 area colors
L2 – 4096 colors
13 PRODUCT VERSION
BLANK – Only 1 version
1
– 2nd version
2
– 3rd version
etc.
All but items 1, 2, 3, 4, 12 are default if not specified.
208
Y – Yellow
A4 – 4 area colors
L3 – 65K colors
etc.
Y – Yellow
A4 – 4 area colors
L4 – 260K colors
CHECK LIST FOR CUSTOM DESIGN LCD PANELS
ACCOUNT
APPLICATION
Company Name:
Contact Person:
Tel:
Fax:
E-mail:
DISPLAY
SPECIFICATION
Outside Dimensions:
t
L1
W2
W3
W1
(L1) :
mm
(W1) :
mm
(t):
mm
Viewing Area:
L2
Terminal Width:
mm
End Seal:
(L2) :
mm
(W3) :
mm
(W2) :
mm
( H ):
mm
H
Bottom
Top
Left
Right
Two Sides
Two Sides
Two Sides
Three Sides
LCD
CONFIGURATION
Display Type
LCD PANEL
SPECIFICATION
NTN
STN (
Yellow-Green
FSTN
STN
Others
View Direction
6:00
12:00
3:00
Polarizer Type
Reflective
LCD mode
Positive
Negative
Visual
Specification
Normal
Anti-Glare
Operating
Method
TEMPERATURE
RANGE
TN
9:00
Transflective
Operating Voltage:
Gray
Blue
Transmissive
Hz
Bias
Operating Temperature:
°C ~
°C
Storage Temperature:
°C ~
°C
CONNECTOR
TYPE
Heat Seal
Rubber Connector
With
Pins
Item
Finalize Specification
Start Design
W/S
Date
Quantity
Other information:
NOTES
Length:
mm
(Manufacturer & Part No. if specified)
CONTROLLER IC
DESIRED
SCHEDULE
Yellow )
Others
Volts, Frame Frequency:
Duty
Green
With
Without File
(We can accept an AUTOCAD File) Please send via E-mail.
LEAD TIME LCD MODULES
1) Counter drawing: 7~14 days after price confirmed.
2) Samples: 45~60 days after counter drawing approved.
3) Mass production: 45~60 days after sample approved.
209
E/S
P/P
M/P
Monthly Q’ty
Total Q’ty
CHECK LIST FOR CUSTOM DESIGN LCD MODULES
ACCOUNT
APPLICATION
Company Name:
Contact Person:
Tel:
Fax:
E-mail:
Display Type
Character
DISPLAY
SPECIFICATION
Display Configuration
Character Font:
Graphic
(W)
Display Type
LCD PANEL
SPECIFICATION
TN
NTN
STN (
6:00
12:00
3:00
Polarizer Type
Reflective
LCD mode
Positive
Negative
Visual
Specification
Normal
Anti-Glare
Viewing Area: (W)
COB
Other
x (H)
x (H)
V
V
Other
Zinc
Varnish
EL
CCFL
With
Without Inverter
Dot Size: (W)
x (H)
mm
Dot Pitch: (W)
x (H)
mm
Green
Yellow )
Hz
With Touch Panel
x (T)
mm
CONTRAST
ADJUST
VR
LCD/PCB:
Nikel
CONNECTOR
TYPE
Other
TEMPERATURE
RANGE
Thermo-Resistor
Others
External:
Heat Seal
Rubber Connector
With Pin
FPC
None
Pin Header
Flat Cable
Other
Other
Operating Temperature:
°C ~
°C
Storage Temperature:
°C ~
°C
(Manufacturer & Part No. if specified)
CONTROLLER IC
Item
DESIRED
SCHEDULE
mm
Transmissive
Others
LED
mm
x (H)
Others
Color:
BACKLIGHT
x (H)
Character Pitch: (W)
mm
Power Supply For LCD (VEE)
Resin
Blue
Character Size: (W)
Bias
Power Supply Voltage (VDD)
Plating:
Gray
Volts, Frame Frequency:
Duty
TAB
9:00
Transflective
Operating Voltage:
COF
without Cursor
Lines
Yellow-Green
View Direction
Outside Dimension: (W)
with
dots
Others
Steel
BEZEL
dots x (H)
STN
COG
DRAVING
CONDITIONS
dots
Character x
FSTN
Operating
Method
MECHANICAL
SPECIFICATION
x
Character x Lines:
Finalize Specification
Start Design
W/S
Date
Quantity
NOTES
LEAD TIME LCD MODULES
1) Counter drawing: 7~14 days after price confirmed.
2) Samples: 45~60 days after counter drawing approved.
3) Mass production: 45~60 days after sample approved.
210
E/S
P/P
M/P
Monthly Q’ty
Total Q’ty
IATF CERT. No. : 0011847
(ISO/TS16949)
CERT. No. : H002005
CERT. No. : 946535
(ISO14001)
(ISO9001) (TL9000)
http://www.truly.com.hk
HEAD OFFICE :
TRULY SEMICONDUCTORS LIMITED
2/F., Chung Shun Knitting Centre, 1-3 Wing Yip Street, Kwai Chung, N.T., Hong Kong.
Tel: (852) 2487 9803 (20Lines)
Fax: (852) 2480 0038, 2422 7668, 2480 0126, 2429 5486
E-mail: [email protected] (General enquiry)
[email protected] (Product enquiry)
CHINA FACTORY :
North of the Dong Chong Road, Industrial Area, Shanwei Shi, Guang Dong Province, China.
Tel: (0660) 337 2777 (6 Lines)
Fax: (0660) 338 0882
E-mail: [email protected]
BEIJING OFFICE :
Tel: (010) 8518 1438
Fax: (010) 8518 5075
E-mail: [email protected]
SHENZHEN OFFICE :
Tel: (0755) 8287 6008
Fax: (0755) 8287 6058, 8287 6098
E-mail: [email protected]
SHANGHAI OFFICE :
Tel: (021) 6426 4818, 6426 4881
Fax: (021) 6426 4082, 6426 4083
E-mail: [email protected]
WUHAN OFFICE :
Tel: (027) 8544 9626, 8544 9635
Fax: (027) 8544 9623
E-mail: [email protected]
CHENGDU OFFICE :
Tel: (028) 8618 0086 (808)
Fax: (028) 8620 2120
E-mail: [email protected]
2007 V1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement