advertisement
WS-PL-MTL-40-35-4-CT model shown.
FEATURES
• Four Independently-Controlled Zones
• Temperature Range of 300 °F to 700 °F
• Stainless Steel Backsplash
• Removable Drip Tray
ELECTRIC
COUNTERTOP PLANCHA
HIGH-TEMP COOK SURFACE
Job Name
Model WS-PL-MTL-40-35-4-CT
Item#
The Electric Countertop Plancha features a small footprint that measures 40 inches x 35 inches with a smooth steel cooking surface 35 inches x 24 inches. Supported by four legs, it is intended for installation on a suitable countertop.
The surface of the Electric Countertop Plancha can be used as a direct contact cooking surface like a griddle for searing or sautéing, or heated up to 700 °F so that it functions more like an open burner .
This is an efficient piece of equipment that radiates less heat than a gas-fired open burner range, resulting in a cooler kitchen.
With four thermostatically controlled zones, the Electric
Countertop Plancha utilizes a proprietary control system developed by Wood Stone, which provides even temperature control across the entire cook surface. Its unique design ensures fast temperature recovery even in the most demanding of production environments.
The Electric Countertop Plancha arrives completely assembled,
ETL Listed, ready to install and is made in the USA.
Additional product information can be found online at: woodstone-corp.com.
ANSI/UL 197
C22.2
CSA 1.8b-2009 t. 360.650.1111
tf.
800.988.8103
f.
360.650.1166
Wood Stone Corporation
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA [email protected]
woodstone-corp.com
REVISED
:
SUMMER 2015
An ongoing program of product improvement may require us to change specifications without notice.
107
ELECTRIC COUNTERTOP PLANCHA
HIGH-TEMPERATURE COOK SURFACE • WS-PL-MTL-40-35-4-CT
VERY IMPORTANT!!
The Electric Countertop Plancha is available in three different electrical configurations. This must be specified at time of order:
208 VAC, 3 Phase 13,300 W.
Requires 1 ea. 50 A individual branch circuit. Single NEMA 15-50P plug.
208 VAC, Single Phase 13,300 W.
Requires 2 ea. 40 A individual branch circuits. Two NEMA 6-50P plugs.
240 VAC, Single Phase 17,700 W.
Requires 2 ea. 50 A individual branch circuits. Two NEMA 6-50P plugs.
PLAN VIEW
39 1/2"
1000mm
34 1/2"
880mm
NOTE:
3-phase model shown in drawings.
HEATING
ZONE
HEATING
ZONE
CLEARANCE INFO:
Provide a minimum of 12 inches of clearance to combustible construction from sides and back.
Allow a minimum of 3 inches of clearance around the unit to allow cooling air to enter the vents on the sides and back of the unit. Do not block the air vents on the sides, back or beneath the appliance.
HEATING
ZONE
HEATING
ZONE
FRONT VIEW SIDE VIEW
108
UTILITIES SPECIFICATIONS
GAS
N/A
ANSI/UL 197
C22.2
CSA 1.8b-2009
5 1/2"
4"
140mm
100mm
ADJUSTABLE RANGE
ELECTRICAL
Must be specified when ordering.
Units are cord-connected. 208 and
240 VAC single phase units are equipped with 2 cords. 208 VAC
3-phase unit equipped with one cord.
VENTING INFORMATION
The Electric Countertop Plancha must be vented in accordance with NFPA 96 and all relevant local and national codes, and in a manner acceptable to the authority having jurisdiction.
Ship Weight: 480 lbs / 218 kg
REVISED
: SUMMER 2015
An ongoing program of product improvement may require us to change specifications without notice. t. 360.650.1111
tf.
800.988.8103
f.
360.650.1166
Wood Stone Corporation
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA [email protected]
woodstone-corp.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement