P O W E R C H A I R

P O W E R C H A I R
MyChair® Programmability
POWERCHAIR
CONTROL SYSTEM
Mobility System
enAble™ 40 Series
Features
Powerbase (1740)
• Best-in-market drive feel and control for front, mid and rear
wheel drive chairs.
• Enhanced ramp control climbing and descending. Smooth
starts and stops on all grades.
• Full 50 and 75 amp power ratings in a rugged, compact and
sealed enclosure.
• Advanced MyChair™ parameter tunes the overall chair feel
to fit each user’s unique need with a single parameter.
• Patented Auto-Trim automatically and contiguously corrects
steering alignment, which can be thrown off by tire, motor
and gearbox wear and replacement.
• Four complete chair configurations/personalities stored in one
unit. Each with two drive profiles.
• 3 flexible Multi-Function input pins can be used for:
- On-board charger with high or low inhibit signal.
- Speed limits based on switch inputs or potentiometer position.
- Individual seat actuator inhibits.
- Swivel chair.
D ES C R I P T I O N
The Curtis enAble 40-Series Powerchair Control System provides
• Powerbase software is upgradable in the field or factory.
unprecedented drive feel and flexibility in a three-module solution:
• Compatible with the 1311 and 1314 programmers.
a powerbase with optional light and seat actuators, an ergonomic
• Meets EEC emission and immunity requirements.
handcontrol with an intuitive icon LCD display and a compact
attendant control.
The integration of light and actuators provides these options at
minimum cost and with simplified installation:
A P P L I C AT I O N
The enAble 40-Series provides the perfect solution for rear-,
mid- and front drive Powerchairs. With its advanced seating
control many Rehab chair configurations will also find the
enAble 40-Series as the right fit.
Lighting Option
• StVZ0 compliant lighting system provides constant brightness
and faulted bulb detection.
• Hazard lamps and running lights continue to operate after
key-off.
Actuator Option
• Two 4-quadrant variable speed actuator drives (12 amps
max) with stall protection.
• Automatic end-stop detection.
www.curtisinstruments.com
enAble™ 40 Series
F e a t u r e s continued
Handcontrol (1741)
Attendant Control (1742)
• Stylish and ergonomic design.
• Easily connected to the system. Plug and play auto-connect
feature.
• Intuitive at-a-glance LCD icon
display with backlight. Viewable
in any lighting.
• Programmable take-over mode.
• Two speed modes, seat control and BDI indication.
• Industry standard 3-pin XLR
Charger/Programmer port on
Handcontrol.
• Compact and stylish.
• 4 keypad configurations to match the application.
Meets or complies with relevant US and
International Regulations
• Field replaceable cable mounts in 2 directions.
• Up to 9 selectable and individually programmable speed
control modes are quickly and easily accessible while driving.
• Key-lock function prevents unauthorized use.
The Curtis enAble™ 40 Series powerchair control system is
designed to meet:
• Rugged and flexible cable.
• EN 12184
• Field replaceable keypad, lens, joystick and cable.
• EN 55022
• IEC 801
• FDA documentation filed
• TÜV Certified
M O D E L C H ART
Powerbase Models
Model
Supply Voltage
Handcontrol Models
Drive Current
Options
Model
Display
Options
1740-1001
24 V
50 A
1741-2001
LCD
1740-2001
24 V
75 A
1741-2101
LCD
1740-1101
24 V
50 A
lights
1741-2201
LCD
actuators
1740-2101
24 V
75 A
lights
1741-2301
LCD
actuators & lights
1740-1201
24 V
50 A
actuators
1740-2201
24 V
75 A
actuators
1740-1301
24 V
50 A
actuators & lights
1740-2301
24 V
75 A
actuators & lights
A C C ESS O R I ES
Battery and Motor Connector kit:
Curtis PN 381570001
Handheld Programmer Cable (XLR): Curtis PN 36378004
Attendant Control Model
1742-2001
lights
enAble™ 40 Series
DIMENSIONS mm
Handcontrol
116
170
85
Powerbase
30 (1.18)
181.0
173.0
2x4.0
2x52.5
30 (1.18)
105.0
2x 5.3
46.4
Attendant Control
54.0
84.0
47.5
25.0
130.0
57.5
0 .0
R3
48.0
54.0
48.0
75.0
enAble™ 40 Series
T y pic a l w i r in g
CIRCUIT BREAKER
BATT+
BATTBATTERY
M1 +
BRK1 +
BRAKE
PM
MOTOR
BRAKE
PM
MOTOR
BRK1 M1 M2 +
1740
POWERBASE
BRK2 +
BRK2 M2 -
MULTI-FUNCTION INPUT 1
MULTI-FUNCTION INPUT 2
MULTI-FUNCTION INPUT 3
BACTUATOR 1+
ACTUATOR 1ACTUATOR 2+
ACTUATOR 2B+
RUNNING LIGHTS
FRONT RIGHT TURN SIGNAL
J1
J2-7
J2-4
J2-1
J2-2
SEAT ACTUATOR
INHIBIT
B+
ON BOARD
CHARGER
OPTION
J2-3
J2-10
J2-11
REAR RIGHT TURN SIGNAL
REAR LEFT TURN SIGNAL
J2-14
J2
J1
8
B-
J2-9
J2-12
1
SEAT ACTUATOR
J2-8
J2-13
6
6 PIN MOLEX
J2-6
FRONT LEFT TURN SIGNAL
1
POTENTIOMETER
OR SWITCH
OPTION
J2-5
14 PIN MOLEX
WARRA N TY Two year limited warranty from time of delivery.
is a trademark of Curtis Instruments, Inc.
Specifications subject to change without notice
©2008 Curtis Instruments, Inc.
50132 REV E 10/08
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement