AFL NOYES SMLP5-5 Single Mode/Multimode Loss Test Kit Spec Sheet

AFL NOYES SMLP5-5 Single Mode/Multimode Loss Test Kit Spec Sheet
Test and Inspection
SMLP5-5 Test Kit with Wave ID, Set Reference, and Data Storage
The SMLP5-5 test kit combines the OPM5-2D optical power meter
and OLS4 integrated LED and LASER light source and is ideally
suited for testing fiber optic networks with hybrid (single-mode and
multimode) cables.
The OLS4 features 850/1300 nm LED output from a multimode
output port and 1310/1550 nm LASER output from a single-mode
output port. Each wavelength may be transmitted individually at
CW or with user selectable modulated Tone (SM output). Also,
each wavelength may be transmitted with Wave ID. Both output
ports are equipped with UCI based removable adapters to allow
the output connectors to be inspected and cleaned.
The OPM5-2D is a full-featured, hand-held optical power
meter designed for measuring optical power in premise, telco,
or broadband networks and for performing insertion loss
measurements on multimode or single-mode fiber optic links.
The standard Wave ID feature (when used with NOYES OLS series
light sources) automatically detects and sets the wavelength(s),
preventing setup and measurement errors. It significantly
increases efficiency and reduces technician errors—and saves
testing time—by eliminating the need to test each wavelength
individually. The OPM5-2D stores optical references for each
calibrated wavelength and offers multiple test tone detection for
fiber identification.
Features
SMLP5-5 Test Kit
•• Wave ID reduces test time
•• Hand-held, rugged, lightweight
•• Cost-effective, easy-to-use
•• N.I.S.T traceable
OLS4 Quad Light Source
•• Dual or single Wave ID, CW, Tone
•• Industry standard 2 Khz test Tone
•• 50 µm and 62.5 µm mandrels
OPM5-2D Optical Power Meter
•• File management system organizes stored test data
•• Storage capability >500 fibers
•• USB port for download of stored data
Data Storage of Test Results
The OPM5-2D File Management system allows technicians to
organize test results into multiple files and transfer stored results
via USB to a PC for analyzing, generating reports, and printing.
The supplied powerful PC Analysis and Reporting Tool (TRM - Test
Results Management software) allows users to apply industry
standards based rules to test results and create comprehensive
certification reports. Users can generate network Pass/Fail results
demonstrating compliance to industry standards and illustrate
headroom. TRM is a Windows® compatible software.
The SMLP5-5 test kit is fully N.I.S.T. traceable.
TRM™ PC Reporting Tool (Windows® Compatible)
•• Apply certification rules to test results
•• Create professional test reports
•• Archive test results
Applications
•• Certify multimode and single-mode links per TIA/EIA standards
•• Fiber identification prior to splicing
•• Passive Optical Networks (PON) testing
•• Save test data for report generation with NOYES TRM Software
Continued on the next page
www.AFLglobal.com or 1-800-321-5298/1-603-528-7780
1
© 2002-2011, AFL, all rights reserved. SMLP-55-2001 Revision E, 2011-01-10
Specifications are subject to change without notice.
Test and Inspection
SMLP5-5 Test Loss Test Kit with PC Reporting Tool – TRM™
Powerful Pair
The SMLP loss test kit and TRM Test Results Management software is a powerful pair
•• Increases efficiency
•• Reduces technician errors
•• Simple to operate with minimal training required
•• Provides customized professional reports
Target Markets
Any one testing fiber links who requires report generation applications include
•• Data networks
•• Telecommunications providers
•• CATV
•• Industrial
WaveID Increases Efficiency and Reduces Errors
•• Enables users to test two wavelengths simultaneously
–– Significantly reduces test time by eliminating the need to test each wavelength individually
•• Automatically detects and sets received wavelengths
–– Eliminates loss measurement errors by automatically matching OPM to transmitted wavelength
Straightforward Results Storage and Easy File Management in the Field
•• Simple to use interface allows for easy separation of results into files
•• Keep cable/job results separated for fast customer report generation
•• Access to files and results allows for quick and easy retest of fibers
Continued on the next page
www.AFLglobal.com or 1-800-321-5298/1-603-528-7780
2
© 2002-2011, AFL, all rights reserved. SMLP-55-2001 Revision E, 2011-01-10
Specifications are subject to change without notice.
Test and Inspection
Upload test data files to PC via USB to utilize powerful data
management and reporting tool – TRM™
File Naming and Data Management Editor
•• Manage job information (Ends, Cable ID, Comments, and Operators) to meet documentation specifications in reports
•• Create Bi-directional results
•• Combine results from multiple OPMs to create a complete job report
•• Automatic backup of data
Create Certification Results to Industry Standards (TIA/ISO/EN and applications)
•• Apply standards based rules to loss results
•• Generate Pass/Fail information for each fiber
•• Demonstrate compliance to industry standards
Customized Reports
•• Create professional personalized reports with company logos
•• Reports meet accepted industry documentation standards.
•• Save common report options for quick generation of future reports
•• Recall previously stored settings to save time generating reports for repeat customers
•• Create certification reports showing fiber pass/fail results based on customer/consultant specifications, Industry Standard, and Industry
Applications
•• Show headroom values for the primary rule (typically the industry standard)
•• Use PC analysis to verify if previously measured fibers (tested with NOYES loss test equipment) meet loss requirements of Standards and
Rules
Superior Customer Support
•• Dedicated customer service, technical support and field sales available to support customers
•• Knowledgeable timely technical support and customer service
Continued on the next page
www.AFLglobal.com or 1-800-321-5298/1-603-528-7780
3
© 2002-2011, AFL, all rights reserved. SMLP-55-2001 Revision E, 2011-01-10
Specifications are subject to change without notice.
Test and Inspection
SMLP5-5 Test Kit with Wave ID, Set Reference, and Data Storage
OLS4 Light Source Specifications
OPTICAL
Wavelength
Emitter Type
OPM5-2D Specifications
MM OPTICAL PORT
SM OPTICAL PORT
850 ±30 nm 1300 -10/+50 nm 1310 ±20 nm 1550 ±20 nm
LED
Laser
Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
40 nm (typ)
120 nm (typ)
5 nm (max) 5 nm (max)
>-20 dBm, 62.5 µm multimode*
0 dBm, 9 µm single-mode
±0.1 dB over 8 hours
±0.05 dB over 1 hour
(after 5 min. warm-up)
(after 15 min. warm-up)
±0.1 dB over 8 hours
(after 15 min. warm-up)
Spectral Width
Output Power
Output Stability
OPTICAL
OPM5-2D
Calibrated Wavelengths
850, 1300, 1310, 1490, 1550 nm
Detector Type
Germanium (Ge)
Measurement Range
+6 to -60 dBm
Tone Detect Range
+6 to -50 dBm
+6 to -45 dBm for 850 nm
Wavelength ID Range
+6 to -50 dBm
+6 to -45 dBm for 850 nm
Accuracy*
±0.25 dB
Resolution
GENERAL
Power
2 x AA batteries, optional AC adapter
Battery Life
Typical 30 hours,
minimum 20 hours
Available Adapters
Operating Temperature
Storage Temperature
Size (H x W x D)
Weight
Typical 72 hours,
minimum 40 hours
SC FC, ST, LC
-10 °C to 50 °C, 90 % RH (non-condensing)
-30 °C to 60 °C, 90 % RH (non-condensing)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
0.29 kg (0.65 lb)
0.01 dB
Measurement Units
GENERAL
Power
dB, dBm, μW
2 x AA batteries, optional AC adapter
Battery Life
300 hours
Operating Temperature -10 °C to 50 °C, 90 % RH (non-condensing)
Storage Temperature
Size (H x W x D)
Weight
* Output power will be approximately 3 dB less if a 50 µm mandrel-wrapped
jumper is used instead of a 62.5 µm mandrel-wrapped jumper.
All specifications at 25 °C.
-30 °C to 60 °C, 90 % RH (non-condensing)
14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
0.26 kg (0.58 lb)
* Accuracy measured at 25 ºC and -10 dBm per N.I.S.T.
standards.
All specifications at 25 °C
Ordering Information
MODEL
INCLUDES
SMLP5-5
OLS4 optical light source, OPM5-2D optical power meter, AA batteries, protective
rubber boots, adapter cap, USB cable, PC reporting tool - TRM™ (Windows®
compatible), 50 and 62.5 µm mandrels, and carry case
Note: Test jumpers and connector adapters are required for operation (purchased
separately). Test jumpers with a variety of connector styles and fiber types and
adapter caps for most common connectors may be purchased from AFL.
Authorized Channel Partner
FIBER SYSTEM
YES
S
NO
ISO
9001
CERTIFIED
United States
Customer Service
1.800.321.5298
1.603.528.7780
www.AFLglobal.com
Europe, Middle East, Africa
Max Penfold
[email protected]
+44 1799 542 840
+44 7802 839 160
Middle East
Ahmed El Sakaty
[email protected]
+20 106 451 523
www.AFLglobal.com or 1-800-321-5298/1-603-528-7780
Africa (Sub Sahara)
Nicholas Cole
[email protected]
+44 7702 005 590
China
Dai Liu
[email protected]
+86 133 1101 4533
Asia-Pacific (non-China)
Saw Biing Huei
[email protected]
+65 9791 3398
© 2002-2011, AFL, all rights reserved. SMLP-55-2001 Revision E, 2011-01-10
Specifications are subject to change without notice.
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement