Universal Remote Control | RNC-100 | Specifications | Universal Remote Control RNC-100 Specifications

Home Theater Master
Universal Remote Control
SL-8000
Operating
Manual
Table of Contents
Page
Introduction
Battery Installation
A. To Open and Close Battery Compartment Cover
B. Low Battery Message
Using Your Remote Control
A. Function Table Reference
Function Tables
B. Preprogrammed Set Up
Three Digit Code Method
Auto Search Method
Recalling the Set Up Code Number
C. Operation
Device Buttons
Main Device Mode
Automatic Audio Mode
Backlighting
Advanced Features
A. Punch Through Controls
Volume “Punch Through”
Channel “Punch Through”
Transport “Punch Through”
B. Memory Buttons
Programming Memory Buttons
Erasing Memory Buttons
C. Changing the LCD Display
D. Programming a Second TV, VCR, etc. to other Device Buttons
Warranty and Specifications
Glossary
Appendix
Assignment of Audio/Video Equipment
Set Up Code Tables
Audio
Satellite
TV
VCR
Cable
CD
DVD
AUX
1
2
3
3
3
4
4
5
8
8
10
12
13
14
15
15
16
17
17
17
18
20
22
24
25
26
27
29
30
32
32
33
33
36
38
41
44
46
48
49
Introduction
The Home Theater Master SL-8000 remote control is
preprogrammed to operate over 1,000 Audio and Video
components so that you can set it up by simply punching
in a three digit code number that matches your equipment.
The Home Theater Master SL-8000 remote control operates
up to eight different audio and video devices in your home
entertainment system. They are listed below:
1
2
3
4
5
6
7
8
TVs, Monitors, Video/LCD Projectors
VCRs, TV/VCR combination units
Cable boxes, Internet set-tops
Satellite receivers - DSS, Primestar, Dish, DBS,
C-Band
Audio receivers, Preamplifiers, Surround processors
Compact disc players, Multi-Disc changers
DVD, Laser disc players, Cassette decks
Cassette Tape Players, DAT, MiniDisc, Switchers,
Lighting, Home Control Devices, and Line Doublers
Setting up the remote control to work with your equipment
is simple. The remote control also has many advanced
features that can add ease and enjoyment to the operation
of your home entertainment system. Please follow the
instructions in this manual, and retain the manual for future
reference.
For any questions or comments about this remote control,
please contact Universal Remote Control, Inc., 271 North
Avenue, New Rochelle, NY 10801, or call (914) 235-2610.
Service hours are 9:00 AM to 6:00 PM EST, Monday- Friday.
2
Battery Installation
This remote control uses four AAA 1.5 V batteries. Please
be sure to match the batteries with the (+) and (–) markings
inside the battery compartment during installation.
A: To Open and Close the Battery
Compartment Cover
1 To open the battery cover, push the latch forward toward
the top of the remote control, and lift the latch up.
2 To close the battery cover, slide the battery cover straight
back in (toward the top of the remote) and push down
until it “clicks” into place.
B: Low Battery Message
When the Liquid Crystal Display (LCD) flashes L__BAT,
the batteries should be replaced.
Note: Batteries should last about 6 months under normal conditions. The SL-8000 remote control will retain its programmed
memory for up to one year after the batteries are removed and up
to ten years after the batteries go “dead”.
3
Using Your Remote
A: Function Table Reference
AUD
CD
DVD
AUX
1
2
3
4
SAT
TV
VCR
CBL
5
6
7
8
POWER
9
MUTE
12
14
13
15
CH
VOL
T/ V
10
GUIDE
11
MENU
21
PAUSE
SEL
R
E
W
F
.
F
PLAY
20
19
STOP
PRE.
CH
EXIT
1
2
3
18
17
23
FAV
22
16
24
25
26
27
37
28
29
30
38
31
32
33
39
35
34
36
40
SLEEP
4
5
6
INFO
PRO.L
7
9
8
NEXT
3.CH
+10
0
ENTER
ALT
SHIFT
TEST
PIP
TUNER
CD
TAPE1
VCR1 VCR2/SAT LDP
M1
M2
TAPE2
PHONO
AUX
TV
M3
M4
41
42
43
44
45
46
47
48
49
50
51
LIGHT
52
53
55
HOME THEATER MASTER
SL-8000
4
54
Using Your Remote
Function Table
No.
Button Name
Audio Functions
SAT Functions
TV Functions
1-8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25-34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
Device Name
Power
Mute
T/V Input
VOL Up
VOL Down
CH Up
CH Down
Up/Pause
Down/Stop
Right/F.F.
Left/Rew
Sel/Play
Guide/I<<
Menu/>>I
Exit/Rec
Pre. Ch./Eject
1—0
10+
Enter/Shift
Fav/Sleep
Info/Pro. L.
Next/3 Ch.
Alt/Test
Tuner
CD
Tape 1
Tape 2
Phono
VCR1
VCR2/SAT
LD/DVD
Aux
TV
M1
M2
M3
M4
Light
AUDIO (ON)
On/Off (OFF)
Mute
Band/FM
Vol Up
Vol Down
Preset +
Preset Center +
Center Rear +
Rear Select/Sub.Bass
Display
Surround
Delay Delay+
1—0
Plus 10
Shift
Sleep
Pro. Logic
3 Ch.
Test Tone
Tuner/AM/FM
CD
Tape 1
Tape 2
Phono
VCR1
VCR2
LD/DVD
Aux
TV
SAT (ON)
On/Off (OFF)
Mute
TV/SAT
Vol Up
Vol Down
Ch. Up
Ch. Down
Up
Down
Right
Left
Select
Guide
Menu
Exit/Cancel
Prev. Ch.
1—0
TV (ON)
On/Off (OFF)
Mute
TV/Video
Vol Up
Vol Down
Ch. Up
Ch. Down
Up
Down
Right/Picture
Left/Audio
Select/Enter
Display/Recall
Menu
Exit/Clear
Q. View/Last Ch.
1—0
100/Ch. Scan
Ch. Scan
Sleep
Caption
Ant
Reset
PIP On/Auto Ch.
PIP Swap, Add
PIP Freeze/Delete
PIP Off/Position
TV/CATV
Auto
Add
Delete
Enter
Fav
Info/Fetch
Next Prog.
Alt. Audio
Rec.
5
Using Your Remote
Function Table
No.
Button Name
VCR Functions
Cable Functions
1-8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25-34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
Device Name
Power
Mute
T/V Input
VOL Up
VOL Down
CH Up
CH Down
Up/Pause
Down/Stop
Right/F.F.
Left/Rew
Sel/Play
Guide/I<<
Menu/>>I
Exit/Rec
Pre. Ch./Eject
1—0
10+
Enter/Shift
Fav/Sleep
Info/Pro. L.
Next/3 Ch.
Alt/Test
Tuner
CD
Tape 1
Tape 2
Phono
VCR1
VCR2/SAT
LD/DVD
Aux
TV
M1
M2
M3
M4
Light
VCR (ON)
On/Off (OFF)
Mute
VCR/TV
Vol Up
Vol Down
Ch Up
Ch Down
Pause
Stop
Fast Forward
Rewind
Play
F. Adv./Slow<
X2/Intro/Slow>
Record
Eject
1—0
1—100
Enter
Program
Display
C-Counter
Reset
Auto Ch
Add +
Delete Tape Speed
VCR Plus
Tracking +
Tracking Auto Tracking
Slow Slow +
Index
QTR On
QTR Off
Edit
CABLE (ON)
On/Off (OFF)
Mute
Switch/A/B
Vol Up
Vol Down
Ch Up
Ch Down
Up/Fine +
Down/Fine Right/Fine R
Left/Fine L
Select
Guide/Recall
Menu
Exit
Prev. Ch
1—0
*/Help
Enter/Memory
Fav
Info
PPV/Buy
P/Delete
Page Page +
Day -.
Day +
Record
6
Using Your Remote
Function Table
No.
Button Name
CD Functions
DVD Functions
AUX Functions
1-8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25-34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
Device Name
Power
Mute
T/V Input
VOL Up
VOL Down
CH Up
CH Down
Up/Pause
Down/Stop
Right/F.F.
Left/Rew
Sel/Play
Guide/I<<
Menu/>>I
Exit/Rec
Pre. Ch./Eject
1—0
10+
Enter/Shift
Fav/Sleep
Info/Pro. L.
Next/3 Ch.
Alt/Test
Tuner
CD
Tape 1
Tape 2
Phono
VCR1
VCR2/SAT
LD/DVD
Aux
TV
M1
M2
M3
M4
Light
CD (ON)
On/Off (OFF)
Mute/Fader
Random
Vol Up
Vol Down
Track +/Skip +
Track-/Skip Pause
Stop
FF/Search +
REW/Search Play
Search Search +
DVD (ON)
On/Off (OFF)
TAPE (ON)
On/Off (OFF)
Mute/Rec Mute
Skip >>I
Skip I<<
Pause
Stop
F.F.
REW
Play
Set Up
Menu
Clear
Open/Close
1—0
10+
Enter
Return
Display
Sub. On/Off
Audio
Up
Down
Select
Angle
Slow
Left
Right
Subtitle
Repeat
Random
A/B Repeat
T
Title
Memory
Eject/Intro
1—0
Plus 10
Disc
Program
Display
Repeat
Clear
Disc 1
Disc 2
Disc 3
Disc 4
Disc 5
A-B
Time
Intro
Edit
7
Pause
Stop
F.F.
REW
Play
Deck A
Deck B
Record
Rev. Play
Deck A
Deck B
REW
For. Play
F.F.
Stop
REV. Play
Pause
Record
Using Your Remote
B: Preprogrammed Set Up
The Home Theater Master universal remote control can
operate up to eight separate audio and video devices
(equipment). To program the remote control for your
devices, please use the following steps:
Three Digit Code Method
1 Turn on the device you would like the remote control to
operate, either manually or with your original remote
control.
2 Find the three digit Set-Up Code number for your
device from the tables on pages (33~50).
Example: To set up the remote to operate with a ZENITH
TV, go to the TV Set-Up Code table found on pages (38 40) and look for ZENITH under the Manufacturer/Brand
column. You will find that the Set-Up Code numbers for
ZENITH TVs are 072, 073, 095, 103 and 157.
3 Press the corresponding Device Button (TV, VCR, SAT,
CBL, AUD, CD, DVD, or AUX) and the MUTE button
on the remote control simultaneously. SET will appear
in the LCD.
AUD
CD
DVD
AUX
SAT
TV
VCR
CBL
Device Buttons
POWER
CH
VOL
Mute Button
MUTE
T/ V
GUIDE
GUIDE
MENU
MENU
PAUSE
PAUSE
Example: To set-up the remote to operate a TV, press the
TV Device Button and the Mute button, simultaneously.
SEL
R
R
E
E
W
W
F
.F
.
F
F
PLAY
PLAY
STOP
STOP
8
EXIT
1
2
PRE.
CH
3
FAV
SLEEP
SLEEP
4
5
6
INFO
PRO.L
PRO.L
7
8
9
+10
0
ENTER
ALT
SHIFT
SHIFT
TEST
TEST
NEXT
3.CH
3.CH
PIP
PIP
TUNER
CD
TAPE1
TAPE2 PHONO
Using Your Remote
Note: SET appears in the LCD for 20 seconds to indicate that
the remote control is ready to be programmed. The following
steps must be entered while SET appears in the LCD.
4 Point the remote control toward the device that was
turned on in Step 1 and press in the first three-digit SetUp Code number for that device using the number buttons
(0-9) on the remote control. SET followed by the number
will appear in the LCD.
Your device will turn off when the correct Set-Up Code
number has been selected. If the device does not turn
off, press in the next Set-Up Code number from the listing.
Continue to select Set-Up Code numbers until your
device turns off, before you proceed to Step 5.
Note: If you have tried all of the three digit Set-Up Code
numbers listed for your device and it still did not turn off, please
proceed to the Auto Search Method on page (10) to
program your remote control.
5 Once your device turns off, press the Device Button
selected in Step 3 once again to store the Set-Up Code
number. PASS will flash in the LCD.
6 Test the remote control for your device. Try the POWER,
CHANNEL UP AND DOWN, VOLUME UP AND DOWN
buttons, etc. If any of the buttons do not perform as they
should, please repeat the set-up from Step 1 using the
next Set-Up Code number for your device.
Note: Some audio/video devices have separate buttons for
POWER ON and POWER OFF. To operate these devices on
the remote, press the corresponding DEVICE Button to turn the
equipment ON and press the POWER button to turn the
equipment OFF.
7 Please repeat the above steps to program the remote
control for each of your other devices.
9
Using Your Remote
Auto Search Method
Please use this method if none of the Set-Up Code numbers
worked for your device during the standard set-up procedure or if the manufacturer or brand for your device is not
listed in Set-Up Code Tables.
1 Turn on the device you would like the remote control to
operate, either manually or with your original remote
control.
2 Press the corresponding Device Button (TV, VCR, SAT,
CBL, AUD, CD, DVD, or AUX) and the MUTE button,
simultaneously. SET will appear in the LCD.
AUD
AUD
CD
CD
DVD
DVD
AUX
AUX
SAT
SAT
TTV
V
VCR
VCR
CBL
CBL
Device Buttons
POWER
POWER
CH
CH
VOL
VOL
Mute Button
MUTE
MUTE
Channel Buttons
T/
T/V
V
GUIDE
GUIDE
MENU
MENU
PAUSE
PAUSE
Note: SET appears in the LCD for 20 seconds to indicate that
the remote control is ready to be programmed. The following
steps must be entered while SET appears in the LCD.
SEL
SEL
R
R
EE
W
W
F
.F
.
FF
PLAY
PLAY
STOP
STOP
PRE.
PRE.
CH
CH
3 Point the remote control toward the device and press the
EXIT
EXIT
CHANNEL UP button on the remote control. Each but1
22
33
ton press sends the1 signal
for
one Set-Up Code number.
44
55 UP 66button pressed produces a
Keeping the CHANNEL
quick scanning of the
Set-Up
Code numbers.
99
77
88
Release the CHANNEL
UP
button as soon as the device
++10
00
10
turns off. Please confirm that you have the correct code
by pressing the MUTE button on the remote. You should
be able to turn your device on and off with this button.
FAV
FAV
SLEEP
SLEEP
INFO
INFO
PRO.L
PRO.L
NEXT
NEXT
3.CH
3.CH
PIP
PIP
TUNER
TUNER
CD
CD
ENTER
ENTER
ALT
ALT
SHIFT
SHIFT
TEST
TEST
TAPE2
PHONO
TAPE2 PHONO
TAPE1
TAPE1
VCR1
VCR1 VCR2/SAT
VCR2/SAT LDP
LDP
M1
M1
M2
M2
AUX
AUX
M3
M3
TV
TV
M4
M4
LIGHT
LIGHT
10
HOME
HOME THEATER
THEATER MASTER
MASTER
LEARNING
LEARNING REMOTE
REMOTE CONTROL
CONTROL
Using Your Remote
If you pass the correct Set-Up Code number, you can
return to it by pressing the CHANNEL DOWN button,
one Set-Up Code number at a time, until your device
turns back on.
Note: During programming, the signal for POWER ON and
POWER OFF is located on the MUTE button. For devices that
use separate POWER ON and POWER OFF buttons, pressing
the MUTE button on the remote control during programming
will only turn the device OFF.
4 Once the correct code is confirmed, press the Device
Button to store the Set-Up Code number. PASS will
appear in the LCD.
5 Test the remote control for your device. Try the POWER,
CHANNEL UP AND DOWN, VOLUME UP AND DOWN
buttons, etc. If any of the buttons do not perform as they
should, please repeat the set-up from Step 1 using the
next Set-Up Code number for your device.
Note: Some audio/video devices have separate buttons for
POWER ON and POWER OFF. To operate these devices on
the remote, press the corresponding DEVICE Button to turn the
equipment ON and press the POWER button to turn the
equipment OFF.
6 Please repeat the above steps to program the remote
control for each of your other devices.
11
Using Your Remote
Recalling the Set-Up Code Number
To display the three digit Set-Up Code number that was
stored for a device.
1 Press the Device Button and the MUTE button, simultaneously. SET will appear in the LCD.
2 Press the T/V button. The LCD will quickly flash the
three digit Set-Up Code number that was stored for your
device in that mode.
3 Please write your Set-Up Code numbers in the chart
below, for future reference.
Set-Up Code Numbers:
Audio
Cable
SAT
CD
TV
DVD
VCR
AUX
12
Using Your Remote
C: Operation
After you have programmed the remote control for your
equipment, use the following procedures to operate your
home entertainment system:
1 Press the Device Button that you wish to operate: e.g. to
operate a TV, press the TV Device Button; to operate a
VCR, press the VCR Device Button, etc.
2 Aim the remote control at the device and press the
POWER button to turn on the device.
3 Press the buttons that send out the commands you
desire.
Note: Some audio/video devices have separate buttons for
POWER ON and POWER OFF. To operate these devices on
the remote, press the corresponding DEVICE Button to turn the
equipment ON and press the POWER button to turn the
equipment OFF.
Please try all the functions of this remote control with your
equipment. The most common functions are labeled on the
remote. However, some of the secondary functions might
be stored under a button that has a different name from the
one on your original remote control. Please refer to the
Function Tables on pages (5 - 7) for details.
13
Using Your Remote
Device Buttons
Any press of a Device button at the top of the remote control
can perform the following functions:
1 Changes the Device mode on the SL-8000 remote control.
2 Sends out a preprogrammed POWER ON command for a
AUD
AUD
CD
CD
DVD
DVD
AUX
AUX
SAT
SAT
TV
V
T
VCR
VCR
CBL
CBL
Device, if applicable.
POWER
3 Sends out a joined selection.
4 Toggles between the Main Device mode and the Automatic
CH
VOL
MUTE
MUTE
T/ V
V
T/
Audio mode if the Automatic Audio Mode is active.
GUIDE
GUIDE
MENU
MENU
PAUSE
PAUSE
Joining to Device Buttons
SEL
SEL
R
R
E
E
W
W
.F
.F
F
F
PLAY
PLAY
The 10 preprogrammed Audio input selects and the keypad buttons 0-9 found on the SL-8000 in the AUDIO Device
mode can be joined to individual Device buttons. Once
joined, any press of 1the Device
button will also emit the
2
3
joined command.
STOP
STOP
PRE.
PRE.
CH
CH
EXIT
EXIT
FAV
FAV
SLEEP
SLEEP
4
5
6
AUD
CD
DVD
7
8
9
SAT
TV
VCR
+10
0
ENTER
ENTER
ALT
ALT
SHIFT
SHIFT
TEST
TEST
PIP
PIP
INFO
INFO
PRO.L
PRO.L
AUX
NEXT
NEXT
3.CH
3.CH
CBL
Device Buttons
POWER
CH
VOL
TUNER
TUNER
MUTE
PHONO
TAPE2 PHONO
TAPE2
TAPE1
CD
TAPE1
CD
T/ V
VCR1 VCR2/SAT
VCR2/SAT LDP
LDP
AUX
VCR1
AUX
GUIDE
M1
M2
M3
M1
M2
M3
Audio Input Buttons
TV
TV
MENU
M4
M4
PAUSE
Setting Up:
1 Press the AUDIO and ENTER buttons simultaneously on
LIGHT
LIGHT
SEL
R
E
W
F
.
F
PLAY
HOME THEATER MASTER
the remote control. JOIN will appear in the LCD.
LEARNING REMOTE
REMOTE CONTROL
CONTROL
LEARNING
STOP
PRE.
CH
2 Press the Device button that you would like to assign a
EXIT
joined function. CLEAR will flash and INPUT will then
1
2
3
appear in the LCD.
FAV
SLEEP
4
5
6
INFO
3 Select a button to be joined from the remote control, e.g. ,
PRO.L
7 or 81, 1, 9
VCR1, VCR2, CD, etc.
2 etc.). The LCD will display
IN_XX indicating +10the 0Audio input selected (IN_V1,
IN_V2, IN_CD, etc. or IN_0, IN_1, IN_2 etc.) and then JOIN.
NEXT
3.CH
ENTER
ALT
SHIFT
TEST
PIP
TUNER
CD
TAPE1
14
VCR1 VCR2/SAT LDP
M1
M2
TAPE2
AUX
M3
PHONO
TV
M4
LIGHT
HOME THEATER MASTER
LEARNING REMOTE CONTROL
Appendix
A: Assignment of Audio/Video
Equipment
Please use the following listing to locate the correct Set-Up
Code Tables for your equipment:
AUDIO Set-Up Code Table:
Audio Receivers, Preamplifiers, Surround Processors
Satellite Set-Up Code Table:
DSS, Primestar, DBS, Echostar, C Band receivers
TV Set-Up Code Table:
TVs, Monitors, Video/LCD Projectors
VCR Set-Up Code Table:
VCRs, TV/VCR combination units
CABLE Set-Up Code Table:
Cable Boxes, Internet/TV Set-Tops
CD Set-Up Code Table:
CD Players, CD Changers
DVD Set-Up Code Table:
DVD Players, Laser Disc
AUX Set-Up Code Table:
Cassette Tape Players, DAT systems, MiniDisc,
Switchers, Lighting, Home Control Devices,
and Line Doublers
32
Glossary
Punch Through
Advanced feature that enables you to operate Volume,
Channel or Transport Control functions of one device
while in another mode.
Example: Audio Volume Control “Punch Through” gives
you the ability to raise, lower and mute your Audio
receiver volume while operating the remote control in the
TV mode.
Set-Up Code Number
The three-digit number that is used to program the remote
control for your particular manufacturer or brand of audio/
video equipment. Set-Up Code numbers are located in
tables in the appendix on pages 33 - 50 of the instruction
manual. Set-Up Code numbers are categorized by type of
device, e.g. TV, VCR, Audio, CD, DVD, Cable, AUX and
Satellite.
More than one Set-Up Code number may work with your
device. You should test the functions for each of the Set-Up
Code numbers that work with your device to determine the
best Set-Up Code number for your particular device.
Note: Some devices, such as CD players and DVD Decks that
do not have POWER buttons on their original remote controls,
may not shut off during programming. For these devices, it may
be necessary to first store the Set-Up Code number and then test
functions like PLAY, STOP, etc., to determine if the correct SetUp Code number has been selected.
Transport Control
Buttons that correspond to the PLAY, STOP, REWIND,
FAST FORWARD, PAUSE, SEARCH/SKIP and RECORD
functions on your audio/video equipment.
31
Using Your Remote
4 Press the ENTER button. SAVE will flash twice and the
LCD will return to AUDIO indicating that the joined
function has been stored.
Every time that the Device button is pressed it will also emit
the joined function.
To erase a joined function from a Device button:
1 Press the AUDIO and ENTER buttons simultaneously on
the remote control. JOIN will appear in the LCD.
2 Press the Device button that you would like to erase a
joined function. CLEAR will flash and INPUT will then
appear in the LCD.
3 Press the ENTER button. The LCD will flash SAVE twice
and return to AUDIO indicating that the join has been
erased.
Main Device Mode
When the main device is displayed in the LCD, the
SL-8000 will perform all of the preprogrammed, joined and
punch through features for that device mode.
Automatic Audio Mode
The remote is defaulted to the Automatic Audio. When the
remote control is in this mode, pressing a Device button a
second time will display A_XXX in the LCD indicating that
the Volume and Mute controls of the device programmed
into the Audio mode of the SL-8000 is active, while full
function control of all other buttons of the current Device
mode is maintained.
Main Device Mode
Automatic Audio Mode
15
Advanced Features
After you set-up the remote control to operate your
equipment, you can also program advanced features on
the remote control. The advanced features are designed
to enhance the use of the remote control with your home
entertainment system.
A: Punch Throughs
Volume Control “Punch Through”
You can program the remote control so that either the
AUDIO or TV Volume Control (VOLUME UP, DOWN AND
MUTE) will also operate in other modes on the remote control.
Example: Raise, lower and mute the VOLUME of your
Audio receiver while the remote control is in the Satellite
mode.
Note: When this feature is active, the AUDIO or TV VOLUME
and MUTE will override any existing volume controls in that
mode.
To Set-Up:
1 Select the mode that you wish to program for Volume
Control “Punch Through.”
2 Press the corresponding Device Button and the MUTE
button simultaneously. SET will appear in the LCD.
3 Press the VOLUME UP button. PUNCH will appear
in the LCD.
4 Press either the AUDIO Device Button to set-up for Audio
Volume Control or the TV Device Button to set-up for TV
Volume Control. AUDIO or TV will flash in the LCD,
depending on which Device Button was selected.
AUDIO or TV Volume Control will now override the
original VOLUME and MUTE in this mode.
17
Glossary
Cursor Control
Buttons that correspond to the UP, DOWN, LEFT, RIGHT,
SELECT, GUIDE, MENU and EXIT functions of your
audio/video equipment.
Device
Audio or video equipment, e.g. Television, VCR, Cable
box, Audio receiver, Satellite receiver, etc.
Device Button
Any of the eight buttons located at the top of the remote
control labeled AUD, CD, DVD, AUX, SAT, TV, VCR and
CBL. Device Buttons are used to select modes of operation
and to program the remote control.
Joining
Transfer of a function from the AUDIO input selects and
keypad(0-9) on the SL-8000 to a Device button at the top of
the remote control.
LCD
Liquid crystal display window located at the top of the
remote control. During normal operation the LCD
indicates the mode. The LCD also indicates the remote’s
programming status.
Memory Buttons
Buttons labeled M1, M2, M3, M4, and POWER. These buttons can be programmed to store Favorite Channels, Macro
Commands, or to “relocate” functions from one mode to
another.
Modes
Modes correspond to Device Button selections. Modes are
displayed in the LCD as AUDIO, CD, DVD, AUX, SAT, TV,
VCR and CABLE. Modes indicate the type of device the
remote control is currently operating.
30
Warranty
The Home Theater Master SL-8000 remote control comes
with a one-year warranty from the date of purchase.
Specifications
Model
SL-8000, infrared remote control.
Power
Four 1.5 V AAA Batteries.
Dimensions (h/w/d)
8.88 x 2.5 x 1.25 inches
Weight
6.5 oz. (with batteries)
29
Advanced Features
To Return to the Original Setting:
1 Select the mode that you want to turn off the Volume
Control “Punch Through.”
2 Press the corresponding Device Button and the MUTE
button simultaneously. SET will appear in the LCD.
3 Press the VOLUME UP button. PUNCH will appear in
the LCD.
4 Press the Device Button again. The DEVICE Mode will
flash in the LCD.
The AUDIO or TV Volume Control “Punch Through” is
now turned off. The VOLUME and MUTE of the original
device will operate on the remote control.
Channel Control “Punch Through”
You can program the remote so that either the SAT or Cable
Channel Controls (CHANNEL UP and DOWN) will also
operate in other modes on the remote control.
Example: Change CHANNELS UP and DOWN on your
cable box while the remote is in the TV mode.
Note: When this feature is active, SAT or Cable CHANNEL
UP and DOWN will override any existing channel controls in
that mode.
To Set-Up:
1 Select the mode that you wish to program for Channel
Control “Punch Through.”
2 Press the corresponding Device Button and the MUTE
button simultaneously. SET will appear in the LCD.
3 Press the VOLUME DOWN button. PUNCH will appear
in the LCD.
18
Advanced Features
4 Press either the SAT Device Button to set-up for SAT
Channel Control or the CBL Device Button to set-up for
Cable Channel Control. Either SAT or CBL will flash
in the LCD, depending on the Device Button selected.
SAT or Cable Channel Controls will now override the
original CHANNEL UP and DOWN in this mode.
To Return to the Original Setting:
1 Select the mode that you want to turn off the Channel
Control “Punch Through.”
2 Press the corresponding Device Button and the MUTE
button, simultaneously. SET will appear in the LCD.
3 Press the VOLUME DOWN button. PUNCH will appear
in the LCD.
4 Press the same Device Button again. The DEVICE Mode
will flash in the LCD.
The SAT or Cable Channel Control “Punch Through” is
now turned off. The CHANNEL UP and DOWN of the
original device will now operate on the remote control.
19
Advanced Features
Your device will turn off when the correct Set-Up Code
number has been selected. If it does not turn off, select the
next Set-Up Code number from the table, and press in that
code number. When your device turns off, proceed to Step 6.
6 Press the Device Button that was selected in Step 2.
to store the Set-Up Code number. PASS will flash in the
LCD to confirm the programming.
The second device can now be operated by pressing the
assigned Device Button and using the buttons within this
mode.
28
Advanced Features
LCD Displays in the Automatic Audio Mode
A_TV
A_DVD
A_AM2
A_PRJ
A_AV
A_VCR
A_AUX
A_TA1
A_AX2
A_TAP
A_CAB
A_TV2
A_TA2
A_LD
A_DAB
A_SAT
A_VC2
A_WEB
A_A2
AUDIO
A_TUN
A_SUR
A_LIT
A_CD
A_AM1
A_DAT
A_DSS
D: Programming a Second TV, VCR, etc.
to Other Device Buttons.
This feature is used to program the remote control for two
or more TVs, VCRs, etc., or to program a device into a
mode with a different Device Button name. You can store
the three-digit Set-Up Code number for any device into any
other unused Device Button.
Example: If your home entertainment system contains
two VCRs. First, using the VCR Device button, program
the remote via standard set-up to operate the first VCR.
Then, program your second VCR into a Device Button that
is not being used, e.g., AUX using this method.
1 Turn on the device.
2 On the remote control, press the Device Button that
you will assign for the device and the MUTE button,
simultaneously. SET will appear in the LCD.
3 Press the Device Button that corresponds to the original
device. SET will still appear in the LCD.
4 Locate the Set-Up Code number for the device from the
tables found on pages (33 - 50).
5 Point the remote toward the device and press
in the first Set-Up Code number. SET, followed by the
Set-Up Code number will appear in the LCD.
27
Advanced Features
Transport Control “Punch Through”
AUD
AUD
DVD
DVD
CD
CD
AUX
AUX
You can set-up your remote control so that VCR or CD
Transport Controls (PLAY,
STOP, FAST FORWARD,
POWER
POWER
REWIND, PAUSE, and RECORD)
also operate in other
VOL
CH
VOLwillCH
modes on the remote control.
SAT
SAT
MUTE
MUTE
CBL
CBL
VCR
VCR
TTV
V
T/
T/V
V
GUIDE
GUIDE
MENU
MENU
PAUSE
PAUSE
SEL
SEL
R
R
EE
W
W
F
.F
.
FF
PL
PLAY
AY
PLAY
PL
AY
Transport Controls
STOP
STOP
PRE.
PRE.
CH
CH
EXIT
EXIT
11
22
33
FAV
FAV
SLEEP
SLEEP
44
55
66
Example: Control VCR
functions
while operating the
remote control in the TV
mode.
99
77
88
INFO
INFO
PRO.L
PRO.L
NEXT
NEXT
3.CH
3.CH
++10
10
00
ENTER
ENTER
ALT
ALT
SHIFT
SHIFT
TEST
TEST
Note: When this feature is active, the VCR or CD functions
(PLAY, STOP, FAST FORWARD, REWIND, PAUSE, and
RECORD) will override any existing functions pre-assigned to
these buttons in that mode.
PIP
PIP
TUNER
TUNER
CD
CD
TAPE1
TAPE1
VCR1
VCR1 VCR2/SAT
VCR2/SAT LDP
LDP
M1
M1
M2
M2
TAPE2
PHONO
TAPE2 PHONO
AUX
AUX
M3
M3
TV
TV
M4
M4
To Set-Up:
1 Select the mode into which you want to program
LIGHT
LIGHT
HOME
HOME THEATER
THEATER MASTER
MASTER
Transport Control “Punch Through.”
SL-8000
SL-8000
2 Press the corresponding Device Button and the MUTE
button simultaneously. SET will appear in the LCD.
3 Press the SELECT/PLAY button. PUNCH will appear in
the LCD.
4 Press either the VCR Device Button to set-up for VCR
Transport Control or the CD Device Button to set-up for
CD Transport Control. VCR or CD will flash in the LCD,
depending on the Device Button selected.
20
Advanced Features
The VCR or CD Transport Controls (PLAY, STOP, FAST
FORWARD, REWIND, PAUSE, and RECORD) will now
override the original functions of the buttons in this mode.
To Return to the Original Setting:
1 Select the mode that you want to turn off the Transport
Control “Punch Through.”
2 Press the corresponding Device Button and the MUTE
button simultaneously. SET will appear in the LCD.
3 Press the SELECT/PLAY button. PUNCH will appear
in the LCD.
4 Press the Device Button again. The Device Mode will
flash in the LCD.
The VCR or CD Transport Control “Punch Through”
feature is now turned off. The original functions
assigned to these buttons are restored.
21
Using Your Remote
C. Changing the LCD Display
Twenty-seven different LCD displays can be selected for
each Device mode of the remote control. To select an alternate LCD display, please use the following procedure:
1 Press and hold the Device button for which you would
like to change the LCD setting.
2 While pressing the Device button, press and release the
MENU button. Each time the MENU button is pressed,
the LCD will show one of twenty-seven displays.
3 Release the Device button when you find the new LCD
display you wish to assign to the Device mode.
AUD
CD
DVD
AUX
SAT
TV
VCR
CBL
POWER
CH
VOL
MUTE
T/ V
GUIDE
MENU
PAUSE
SEL
R
E
W
F
.
F
PL AY
PLAY
STOP
PRE.
CH
EXIT
Choice of LCD Displays
TV
VCR
DVD
AUX
AMP2
TAPE1
PROJE
AUX2
AV
TAPE
1
2
CABLE
SLEEP
TV2 5
4
SATFAV
3
6
VCR2
INFO
TAPE2
PRO.L
WEBTV
7
9
NEXT
ENTER
ALT
SHIFT
TEST
LD
8
AUD2
3.CH
+10
DAB0
PIP
TUNER
CD
26 TAPE2
TAPE1
VCR1 VCR2/SAT LDP
M1
M2
AUX
M3
PHONO
TV
M4
LIGHT
HOME THEATER MASTER
SL-8000
AUDIO
CD
TUNER
AMP1
SURR
DAT
LIGHT
DSS
Advanced Features
1 Press the Audio Device Button and the MUTE button
simultaneously. SET will appear in the LCD.
2 Press Memory Button M2. M2_ # # will appear in the LCD.
3 Press the MUTE button (to turn on the Audio receiver)
M2__01 will appear in the LCD.
Press the TV Device Button (to change to the TV mode)
M2__02 will appear in the LCD.
Press the MUTE button (to turn on the TV)
M2__03 will appear in the LCD.
Press the VCR Device Button (to change to the VCR mode)
M2__04 will appear in the LCD.
Press the MUTE button (to turn on the VCR)
M2__05 will appear in the LCD.
Press the SAT Device Button (to change to SAT mode)
M2__06 will appear in the LCD.
Press the MUTE button (to turn on the Satellite receiver)
M2__07 will appear in the LCD.
Power On/Off is located on the MUTE button during the
programming mode.
4 Press the CHANNEL UP button. SAVE will flash in the
LCD, and the remote will return to the AUDIO mode.
Erasing Memory Buttons
1 Select the mode (AUD or SAT) in which you want to
erase the Memory Button.
2 Press the corresponding Device Button (AUD or SAT) and
MUTE button, simultaneously. SET will appear in the
LCD. Press the Memory Button to be erased. M(1-5)_# #
will appear in the LCD.
3 Press the CHANNEL UP button. SAVE will flash in the
LCD. The Memory Button is now erased.
Note: Any previously stored commands on a Memory Button
will be erased when new commands are stored on the same
Memory Button.
25
Advanced Features
B: Memory Buttons
There are five memory buttons (M1~M4, Power) that are
designed to store up to 15 commands in each button.
Pressing any one of the memory button will send out the
series of commands that are stored in the button.
AUD
AUD
CD
CD
DVD
DVD
AUX
AUX
SAT
SAT
T
TV
V
VCR
VCR
CBL
CBL
POWER
POWER
You can either turn on or off up
devices by storing
CH
CH
VOL
VOLto eight
Power on/off commands or use it to select the favorite
channels by storing channel numbers into the button. You
can also combine Power on/off, select favorite channel and
any of the features in the remote control to these buttons.
MUTE
MUTE
T/
T/ V
V
GUIDE
GUIDE
MENU
MENU
PAUSE
PAUSE
SEL
SEL
R
R
E
E
W
W
F
..F
F
F
PLAY
PLAY
You can program any of the memory buttons (M1~M4,
Power) in AUD mode and it will send out the stored commands in Audio, CD, DVD and AUX modes. You can also
program the memory 11 buttons
in SAT mode and it will
2
2
3
3
send out the stored commands in Satellite, TV, VCR and
4
4
5
5
6
6
CBL modes.
STOP
STOP
PRE.
PRE.
CH
CH
EXIT
EXIT
AUD
FAV
FAV
AUX
DVD
CD
SLEEP
SLEEP
SAT
INFO
INFO
CBL
VCR
TV
PRO.L
PRO.L
Power Button
7
7
8
8
9
9
0
0
ENTER
ENTER
VOL
ALT
ALT
CH
SHIFT
SHIFT
TEST
TEST
NEXT
NEXT
POWER
+10
10
3.CH
3.CH
MUTE PIP
PIP T/ V
TUNER
TUNER
GUIDE
CD
CD
PHONO
TAPE2
TAPE2 PHONO
TAPE1
TAPE1
MENU
Memory Buttons
PAUSE
VCR1
VCR1 VCR2/SAT
VCR2/SAT LDP
LDP
M1
M1
R
E
W
AUX
AUX
M2
M2 SEL M3
M3
PLAY
TV
TV
M4
M4
F
.
F
LIGHT
LIGHT
STOP
PRE.
EXIT
CH
HOME
HOME THEATER
THEATER MASTER
MASTER
LEARNING
LEARNING REMOTE
REMOTE CONTROL
CONTROL
1
2
3
FAV
SLEEP
4
5
6
INFO
PRO.L
7
8
9
+10
0
ENTER
ALT
SHIFT
TEST
NEXT
3.CH
PIP
TUNER
CD
TAPE1
VCR1 VCR2/SAT LDP
M1
M2
22
TAPE2 PHONO
AUX
M3
TV
M4
LIGHT
HOME THEATER MASTER
LEARNING REMOTE CONTROL
M1~M4 Buttons
Advanced Features
• Macro Commands:
Memory Buttons can store and emit up 15 commands
including multiple Power On/Off sequences.
Example: In the Audio mode, the POWER Memory Button
can be programmed to turn on the TV, turn on the Audio
receiver, turn on the VCR and turn on the Satellite receiver
with one button push.
Note: The MUTE buttons is used to designate POWER commands during Memory Button programming. See the Example:
Memory Button Programming for further description.
• Favorite Channels:
Memory Buttons can provide direct access to your channels with one button push.
Example: In the SAT device mode each of the Memory
Buttons M1, M2, M3, M4 can provide direct access to a
different satellite channel by sending out the three digit
channel number for that channel to your satellite receiver with one button push.
23
Advanced Features
Programming Memory Buttons:
1 Select the section that you wish to program the Memory
Button in by pressing the corresponding Device Button
(AUD, or SAT) and MUTE button, simultaneously. SET
will appear in the LCD.
2 Press one of the Memory Buttons (M1, M2, M3, M4, or
POWER) into which you wish to store the functions.
M(1-5)_# # will appear in the LCD.
3 Press in up to fifteen commands that you want stored in
that Memory button. Each successive button selection
will appear as M(1-5)__(01-15) in the LCD.
You can select functions from another mode by first
pressing the corresponding Device Button and then the
buttons where those functions are located in that mode.
The pressing a Device Button also counts as one command.
Note: Each insertion of a Device Button adds a 1/2 second
delay to the command sequence.
4 Press the CHANNEL UP button to store your selections.
SAVE will flash three times in the LCD to confirm the
programming.
Note: It can take up to 15 seconds to send out 15
commands from a memory button. Please continue to point
the remote control at the device(s) until all the commands on the
Memory Button have been sent out. This will ensure that all the
commands are received by the device(s).
Example: Memory Button Programming.
To program Memory Button M2 in the Audio mode to send
the following commands: turn on the Audio receiver, turn
on the TV, turn on the VCR, and turn on the satellite
receiver.
24
Using Your Remote
No IR commands are emitted during the second press of a
Device button when the remote is in the Automatic Audio
mode. Pressing the Device button again will return the
remote to the Main Device Mode.
To Delete the Automatic Audio for a Device mode:
1 Press and hold the AUDIO Device button and the LIGHT
button simultaneously. A_SET will appear in the LCD.
2 Press the Device button corresponding to the Device mode
to be deleted for Automatic Audio. E.g. VCR, CD etc.
A_OFF will appear in the LCD indicating the deleted
status of the automatic Audio mode for the Device mode.
3 Press the ENTER button to store the programming.
SAVE will flash in the LCD and then return to AUDIO.
To Return to Automatic Audio for a Device mode:
1 Press and hold the AUDIO Device button and the LIGHT
button simultaneously. A_SET will appear in the LCD.
2 Press the Device button corresponding to the Device mode
to be added for Automatic Audio. E.g. VCR, CD etc.
A_ON will appear in the LCD indicating the active
status of the Automatic Audio mode for the Device mode.
3 Press ENTER to store the programming. SAVE will flash
in the LCD and then return to AUDIO.
Backlighting
All the buttons and the LCD on the SL-8000 are back-lit
for 7 seconds when the LIGHT button is pressed. The backlight is extended an additional 7 seconds with any button
press while the backlight is on.
16
Set-Up Code Tables
AUX
Manufacturer/Brand
Set-Up Code Number
3M
AIWA
ARCHER
AUTON
CARVER
DENON
DMX
DRAPER SCREEN
DWIN
EVERQUEST
EXTRON
FAROUDJA
FISHER
FUJI
GOLDSTAR
HARMAN KARDON
JERROLD
JVC
KENWOOD
LINN
LITE-TECH
LUTRON
LUXMAN
MAGNAVOX
MAKITA
MARANTZ
MCINTOSH
MINDPATH
MITSUBISHI
NAD
NAKAMICHI
NILES
NSM
ONKYO
OPTIMUS
PANASONIC
PHILIPS
PIONEER
POLKAUDIO
QUASAR
REPLAY
152
015 071 100 114 164
155
191
006 008 027 024 036
105 227 229
156
204
080
206
151
184
064
209
011
233
153
106 116 239 240 185
005 013 023 026 064 145 146 181 190 185
124
208
158 159 077
035 137 139
027
186 201
014 027 056 065 087
238
205
242 243
029 048
244 245 025
160 187
161
002 012 016 017 018 019 115
026 054 055
007 010 032 088 195
027 087
003 039 047 050 066 098 222
162
007 088
075
49
Set-Up Code Tables
Cable
Manufacturer/Brand
Set-Up Code Number
REGAL
REGENCY
SAMSUNG
SCIENTIFIC ATLANTA
SIGNAL
SIGNATURE
SL MARX
SONY
SPRUCER
STARCOM
STARGATE
TADIRAN
TOCOM
TOSHIBA
UNIKA
UNITED CABLE
UNIVERSAL
VIEWSTAR
ZENITH
049 050
057
030
003 011 041 042 043 045 046
030
103
030
096
047 078
002 004 008 009
008 030 097 104
030
039 040 056
052
007 014
004 053
005 007 014 032 035
012 015 018 086 087 088 089
052 060 093 100
45
Set-Up Code Tables
Cable
Manufacturer/Brand
Set-Up Code Number
ABC
AMERICAST
ANTRONIX
ARCHER
BELL SOUTH
CENTURION
CENTURY
CITIZEN
COMBANO
COMSAT
COMTRONICS
DIGICABLE
EAGLE
EASTERN
ECHOSTAR
ELECTRICORD
GEMINI
GENERAL ELECTRIC
GENERAL INSTRUMENT
GNC
GOLDEN CHANNEL
HAMLIN
HITACHI
JERROLD
MAGNAVOX
MEMOREX
MITSUBISHI
M-NET
MOVIE TIME
NOVAPLEX
NSC
OAK
PANASONIC
PARAGON
PHILIPS
PIONEER
PRUCER
PTS
PULSAR
RCA
RECOTON
103 003 004 039 042 046 053
099
014
005 007 014
099
092
007
007
080 081
074
030
101
020 030 040
057 066
106
032
008 054
072
103 074 104
099
030
049 050 055
103 055
103 002 003 004 008 009 010 069 074
010 012 064 079 095 094
052
102
037
028 032
092
015 028 038 071
031 037 053
044 047
052
006 012 013 020 085 095
103 034 051 063 076 105
059
011 071 074
052
047
098
44
Set-Up Code Tables
VCR
Manufacturer/Brand
Set-Up Code Number
THOMAS
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
034
006
008 013 042 047 059 079 082 112 131 081
040 101
040
012
048
012 034 046 141
040
003 013 017 024 031 034 040 053 054 131
012 034 039 043
034 048 056 058 072 080 101
43
Set-Up Code Tables
VCR
Manufacturer/Brand
Set-Up Code Number
MITSUBISHI
MTC
MULTITECH
NEC
NORDMENDE
OPTONICA
ORION
PANASONIC
PENTAX
PHILCO
PHILIPS
PILOT
PIONEER
PORTLAND
PULSAR
QUARTZ
QUASAR
RADIO SHACK
RCA
REALISTIC
RICO
RUNCO
SALORA
SAMSUNG
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHINTOM
SIGNATURE
SONY
SOUNDESIGN
STS
SYLVANIA
SYMPHONIC
TANDY
TATUNG
TEAC
TECHNICS
TEKNIKA
013 020 045 046 051 059 061 142 151 049
034 040
024 034
012 023 039 043 048
043
053 054
025
066 070 083 133 140 145 157 163 074
013 020 031 063
031 034 067
031 034 054 067 071 101
101
013 021 048
108
072
002 014
066 145 075
123
013 020 041 107 109 140 144 145 147 034 040 158
003 008 010 014 031 034 040 053 054 101
058
148
014
032 040 066 102 104 107 109 112 113 115 120 122 125
022 043 048 135
003 007 010 014 134 102
017 037 112 129 131
003 008 009 010 013 014 081 101 017 073 112
031 054 149 159 165
024
034
003 031 052 056 057 058 076 077 078 149 154
034
013
031 034 059 067
034
010 034
039 043
034 039 043
031 070
019 031 034 101
42
Set-Up Code Tables
VCR
Manufacturer/Brand
Set-Up Code Number
AIWA
AKAI
AMPRO
ANAM
AUDIO DYNAMICS
BROOKSONIC
CANON
CAPEHART
CRAIG
CURTIS MATHES
DAEWOO
DAYTRON
DBX
DYNATECH
ELECTROHOME
EMERSON
034 161
016 043 046 124 125 142 146
072
031
012 023 039 043
035 037 129
028 031
108
003 040 135
031 041
005 007 010 065 108 110 111 112 116 117 119
108
012 023 039 043
034 053
059
006 017 025 027 029 031 034 035 036 037 046 101 129
131 138 153 162 116
003 008 009 010
034
031 063 072 107 109 144 147
132 136 155 040 115
012 013 020 101 106 114 123
012 045
004 018 026 034 043 063 137 150 160 013
031
031
012 013 015 040 066 101
043
012 031 043 048 050 055 060 130 150 152
014 048 034 047
034
003 009 017 034 106
040
031 034 041 067 068 156 164
012 031 067 069
101
027 030
031
003 010 014 031 034 053 072 101 102 134 139
045 046 059
013 020
FISHER
FUNAI
GE
GO VIDEO
GOLDSTAR
HARMAN KARDON
HITACHI
INSTANTREPLAY
JCL
JCPENNY
JENSEN
JVC
KENWOOD
LLOYD
LXI
MAGIN
MAGNAVOX
MARANTZ
MARTA
MATSUI
MEI
MEMOREX
MGA
MINOLTA
41
Set-Up Code Tables
TV
Manufacturer/Brand
Set-Up Code Number
SAMPO
SAMSUNG
SANYO
SCOTT
SEARS
SELECO
SHARP
SIEMENS
SIGNATURE
SONY
SOUNDESIGN
SPECTRICON
SSS
SUPRE MACY
SYLVANIA
TANDY
TATUNG
TECHNICS
TECHWOOD
TEKNIKA
TELEFUNKEN
TELERENT
TERA
TMK
TOSHIBA
TOTEVISION
UNIVERSAL
VIDEO CONCEPTS
VIDIKRON
VIDTECH
WARDS
197 058 004
004 050 089 101 105 127 143 160
166 007 020 053 057 082 187
004 028 043 048 143
015 030 004 007 028 057 143 094 160 082 165 166
189
170 081 019 028 029 014 004 022 143 175
088
072
070 085 139 147 126 185 194
004 028 003 043
112
004 043
002
197 003 059 060 063 064 164 044 160 127
081
056 062
034 080
004
002 003 004 024 028 043 072 101 143
037 046 086 087
072
172
004
007 015 030 040 062 101 138
143
008 009
146
174 184 188 192
004
004 008 009 019 028 060 061 063 064 072 074 143 164
034
076
197 004
004
043
072 073 095 103 157
112
WESTING HOUSE
YAMAHA
YORK
YUPITERU
ZENITH
ZONDA
40
Set-Up Code Tables
TV
Manufacturer/Brand
Set-Up Code Number
JCPENNY
JENSEN
JVC
KEC
KENWOOD
KLOSS
KMC
KTV
LODGENET
LOGIK
LUXMAN
LXI
MAGNAVOX
MARANTZ
MATSUI
MEMOREX
METZ
MGA
MINERVA
MITSUBISHI
MTC
NAD
NEC
NIKEI
ONKING
ONWA
OPTONICA
ORION
PANASONIC
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
PROTON
QUASAR
RADIO SHACK
RCA
REALISTIC
ROCTEC
RUNCO
197 004 008 009 024 030 065 101 143 156 160
013
034 038 070 083 145 199
043
197 070
002 059
143
197 043 143 154
072
072
004
166 007 015 052 081 160 164
197 003 004 022 059 060 061 063 064 127 160 164 094
197 164
164
007 072 004
088
197 004 024 028 042
088
004 024 028 040 042 109 124 146 191
197 004 062 101
015 025
132 130 134 197 040 016 024 056 019
043
043
043
019 081
096
034 056 080 092 164
197 003 024 056 059 060 063 064 164 004
197 003 004 005 038 059 093 164 127
197 018 023 025 116 135 190
004 143
144 160 161 165 167
004 058 131 143 171 173 193
034 056 092
019 043 143 004 127
160 161 165 065 156 144 197 004 023 024 056 074 152
007 019 043 047
186
168 169 178 179 180 181 182 183
39
Set-Up Code Tables
TV
Manufacturer/Brand
Set-Up Code Number
ADMIRAL
AKAI
AMARK
AMPRO
AMSTRAD
ANAM
AOC
AUDIOVOX
BLAUPUNKT
CANDLE
CAPEHART
CETRONIC
CITIZEN
CLASSIC
CONCERTO
CONTEC
CORONADO
CRAIG
CROWN
CURTIS MATHES
CXC
DAEWOO
DAYTRON
DWIN
DYNASTY
DYNATECH
EIKI
ELECTROHOME
EMERSON
072 081 161 160
197 146
112 143
073 167
052
043 054 056 080 112 131
197 004 112 058
076
088
197 002 003 004
058
043
197 002 003 004 043 101 103 143
043
004
043 050 051
143
043 054
043 143
197 101 004 143
043
004 016 043 044 076 103 114 125 127 143
004 143
177
043
062
187
024 076 143 196
197 004 005 028 043 047 048 050 051 076 096 143 151
153 154 155
007 057
198
028 043
043
197 008 009 034 056 073 074 130 144 155 160 161 165
004 091
004 102 106 112 113 116 119 127 143
004
004 009 010 011 012 023 075 143 158 163 166 072
164
164
FISHER
FUJITSU
FUNAI
FUTURETECH
GE
GOLDSTAR
HALL MARK
HITACHI
INFINITY
JBL
38
Set-Up Code Tables
Satellite
Manufacturer/Brand
Set-Up Code Number
PROSAT
PROSCAN
RCA
REALISTIC
SAMSUNG
SATELLITE SERVICE
SONY
STARCAST
SUPERGUIDE
TEECOM
TOSHIBA
TOWN & COUNTRY
UNIDEN
072
151 106 150
151 106 150
043 074
123
028 035 047 085
103
041
020 124 125
023 026 075 087 088 090 107 130 137
002 127
023 026
016 025 042 043 044 045 048 049 078 079 080 086 101
135 136
115
128 146
081 082 083 084 091 120
VIEWSTAR
WINEGARD
ZENITH
37
Set-Up Code Tables
Satellite
Manufacturer/Brand
Set-Up Code Number
ALPHASTAR
AMPLICA
BIRDVIEW
BSR
CAPETRONICS
CHANNEL MASTER
CHAPARRAL
CITOH
CURTIS MATHES
DRAKE
DX ANTENNA
ECHOSTAR
ELECTROHOME
EUROSAT
FUJITSU
GENERAL ELECTRIC
GENERAL INSTRUMENT
HITACHI
HOME CABLE
HOUSTON TRACKER
HUGHES
HYTEK
HYUNDAI
ICR
JANIEL
KATHREIN
LEGEND
LUTRON
LUXOR
MACOM
MEMOREX
NEXTWAVE
NORSAT
PACE
PANASONIC
PANSAT
PERSONAL CABLE
PHILIPS
PL
PRESIDENT
PRIMESTAR
123
050
129 113 051 126
053
053
013 014 015 018 036 055
008 009 012 077
054
050
005 006 007 010 011 112 116 141 052
024 046 056 076
038 040 057 058 093 094 095 096 097 098 099 100 122
089
114
017 021 022 027 133 134
151 106 150
003 004 016 029 031 059 101 148
139 140
080 044 029
033 037 039 104 057 051
068
053
149
023
060 147
108
057
132
144 062
010 059 063 064 065
057
028 124 125
069 070
143
142 060
121
117
071
023 026
019 102
110 030
36
Set-Up Code Tables
Audio
Manufacturer/Brand
Set-Up Code Number
ADC
ADCOM
AIWA
AKAI
AMC
AMEND
AMX
ANGSTROM
ARCAM
AUDIO ACCESS
AUDIO ALCHEMY
AUDIO DESIGN
AUDIO EASE
AUDIO FILE
AUDIO MATRIX
AUDIO SOURCE
AUDIO TECHNICA
B&K
BOSE
BRYSTON
CARVER
CASIO
CHIRO
CINEMA SOUND
CITATION
CLARION
CURTIS MATHES
DENON
EIGER
ELAN
ENLIGHTENED AUDIO
FISHER
FOSGATE
GE
GOLDSTAR
HAFLER
HARMAN KARDON
HITACHI
INKEL
JBL
JCPENNY
007
082 092 225 161 269
018 104 170 202 203 213 211 188
138 189
125 126 127 128 258
054
196
142
141
147
135
194 221 011
021 196 207
071
167
273
134
096 097
070 170 224
023
006 028 061 071 201 214 226 180 185 022 029 077
076
140
034 134
148 272
026
076
002 034 109 215 229 230 027 037 234 259
149
057
099 098
047 214 180 182
062 231
056 260
008
174
231 233 254 153 154 118 121 227
020
197
263
076 216
33
Set-Up Code Tables
Audio
Manufacturer/Brand
Set-Up Code Number
JEFF ROWLAND
JENSEN
JVC
KENWOOD
206
058
240 163 191 114 266
026 066 145 146 181 190 197 192 182 199 151 222 180
005
220
216
150 072
007
120 235 236 237
124
137 139 052 165 115 004 009
076 056
086 164 152 208
006 028 031 040 063 185 186 251 265
238
076
100 012 013
242 243 204
157 158 042 043 081 112
186 113
111 244 245 172 183
176
017 046 064 107 108 187 079 080 090 179 209 270
026 041 138
032 195 219 177
129 130 132 261
196
249 250 251 063
014 033 039 044 045 050 069 159 168 116 035 078 198
144 268
010 048 117 156 067
019 056 073 075 095
162
074 083 085
016
040 048 110 119 065 228
047 059
019 091
076
026 094 131 175 181
KINERGETICS
KOSS
KRELL
KYOCERA
LEXICON
LINN
LUXMAN
LXI
MAGNAVOX
MARANTZ
MCINTOSH
MCS
MERIDIAN
MITSUBISHI
MONDIAL
NAD
NAKAMICHI
NEC
ONKYO
OPTIMUS
PANASONIC
PARASOUND
PHAST
PHILIPS
PIONEER
PROCEED
RCA
REALISTIC
REVOX
ROTEL
SAMSUNG
SANSUI
SANYO
SCOTT
SEARS
SHARP
34
Set-Up Code Tables
CD
Manufacturer/Brand
Set-Up Code Number
ADCOM
AIWA
AKAI
AMC
AMEND
ARCAM
AUDIO ACCESS
AUDIO EASE
AUDIO TECHNICA
BSR
CALIFORNIA AUDIO
CAPETRONIC
CARRERA
CARVER
062 042
059 065 088 089 105 122 170 187
085 195 202
231 232
118
238
119 147
165
046
037 057
103 008
063
057 080
185 041 044 050 086 107 130 134 135 138 139 203 204
167
111 182
182
159
035
002 123
042 069 102
050 185 134 008
111
010 069 102
080
093
018 033 047 208
042 175
130 143 144
014 061 092 141
158
004 022 136 163 213 214 242
185 007 023 055 071 072 142 137
061
241
005
102
011 028 070 076
059
044 107
027 041 044 051 077 107 209
212
014 073 092
010
044 107
179
CASIO
CLARINETTE
CREEK
CROWN
DENON
EMERSON
FISHER
FRABA
GENEXXA
GOLDSTAR
HAITAI
HARMAN KARDON
HITACHI
INKEL
JC PENNY
JENSEN
JVC
KENWOOD
KOSS
KRELL
KYOCERA
LOTTE
LUXMAN
LXI
MAGNAVOX
MARANTZ
MCINTOSH
MCS
MEMOREX
MISSION
MITSUBISHI
46
Set-Up Code Tables
CD
Manufacturer/Brand
Set-Up Code Number
MITSUMI
MODULAIRE
MONDIAL
NAD
NAKAMICHI
NEC
NIKKO
NSM
ONKYO
OPTIMUS
PANASONIC
PARASOUND
PHILIPS
PIONEER
PROCEED
PROTON
QUASAR
RADIO SHACK
RCA
REALISTIC
ROTEL
SAE
SANSUI
SANYO
SCOTT
SHARP
SHERWOOD
SIGNATURE
SONY
SOUNDESIGN
SUMO
SYLVANIA
SYMPHONIC
TAEKWANG
TANDY
TEAC
TECHNICS
TECHWOOD
THETA DIGITAL
TOSHIBA
VECTOR RESEARCH
VICTOR
WARDS
YAMAHA
YORX
153
182
147
006 005 067 178
217 218 219 095
014 062
046
044 107
030 038 039 168 169
010 050 057 058 081 082 083 085 093 195
103 201 172 008 068
233
041 044
010 020 025 056 174 175 176
239
044 107 228
103 008
182
017 042 150
042 050 051 102 181 182 187
044 107 161 178
044 107
044 069 107 128 171 190 125
050
069 102
026 031 051 066
003 019 051 096 112 115 119 166
033
048 081 097 126 133 177 225 226 164
251
155
044 107
052 181
195 085
010
015 034 036 051 052 101 131 140 079
060 103 200 172 184 008 068
076
234 235
006 067 091 160 148
080
004 022 114 124
185 033
024 046 054 186 183
182
47
Set-Up Code Tables
AUX
Manufacturer/Brand
Set-Up Code Number
RUSSOUND
SANSUI
SCIENTIFIC ATLANTA
SHARP
SHERWOOD
SIMA
SOLO ELECTRONICS
SOMFY
SONY
STARCOM
TEAC
TECHNICS
TOSHIBA
TURBOSCAN
VELODYNE
VICTOR
X-10
XANTECH
YAMAHA
081
027 113 119 224
163 156
026 057 131 175 181
038 004 028 030 033 034
082
207
078 079
020 022 052 084 089 164 165 166
153
009 059 212
007 010 076 088 109 122 193
112
167
203
106
183
168 169 170 171 172 188 189
021 026 031 067
50
Set-Up Code Tables
DVD
Manufacturer/Brand
Set-Up Code Number
DENON
FUNAI
GE
GOLDSTAR
JVC
KENWOOD
MAGNAVOX
MARANTZ
MITSUBISHI
NAD
ONKYO
OPTIMUS
PANASONIC
PHILIPS
PIONEER
PROSCAN
RADIO SHACK
RCA
REALISTIC
RUNCO
SAMSUNG
SANYO
SHARP
SONY
TECHNICS
THETA DIGITAL
THOMPSON
TOSHIBA
YAMAHA
ZENITH
007 206 207 080
120
026 027
057
012
152 013
066 032 121
211
017 121
121
076 035
049 013
021 113 042
066 032
023 106 117 121
026 027
120
026 027 002
049
127
056 070
075
152 013
033 053 110
113
032
026 027
035 152 106
042 129 043
057 074
48
Set-Up Code Tables
Audio
Manufacturer/Brand
Set-Up Code Number
SHERWOOD
SONY
SOUNDESIGN
SOUNDSTREAM
SSI
SUMO
TAEKWANG
TEAC
TECHNICS
THETA DIGITAL
TOSHIBA
WARDS
YAMAHA
ZENITH
024 038 055 102 103 105 106 051 030
018 093 223 247 248 160 166 015 101 184 218 271
036
084 088
068
171
138
005 019 049 111 212 217
122 176 193 219 178 177 200 257 262
136
060 087 198
180
026 253 169 067 173 205 264 232 089 264
143 210
35
OEE-0031V
Rev. 1
Download PDF