HP | Presario SG1100 - Desktop PC | User`s guide | HP Presario SG1100 - Desktop PC User`s guide

User’s Guide
Compaq P1100 Color Monitor
Compaq P1100 Color Monitor
325603-001
Notice
The information in this guide is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE
LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR
OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL.
This guide contains information protected by copyright. No part of
this guide may be photocopied or reproduced in any form without
prior written consent from Compaq Computer Corporation.
 1999 Compaq Computer Corporation.
All rights reserved. Printed in Singapore.
Compaq and Deskpro are registered in the U. S. Patent and
Trademark Office.
Microsoft, MS-DOS, Windows, Windows NT, and other names of
Microsoft products referenced herein are trademarks or registered
trademarks of Microsoft Corporation.
ENERGY STAR is a U.S. registered mark.
Product names mentioned herein may be trademarks and/or
registered trademarks of their respective companies.
The software described in this guide is furnished under a license
agreement or nondisclosure agreement. The software may be used
or copied only in accordance with the terms of the agreement.
User’s Guide
Compaq P1100 Color Monitor
First Edition (July 1999)
Part Number 325603-291
CD-ROM Part Number 153303-001
Compaq Computer Corporation
Part Number: 144437-001 - Writer: Marianne Silvetti - Saved by: MSilvetti
Saved date: 09/16/99 12:09 PM
File Path: P:\Docs\Monitors\Mayflower
English
Product Features
The Compaq P1100 Color Monitor is a microprocessor-based, highresolution monitor with auto-scanning. The monitor features include the
following:
?# 21-inch (19.8-in/50.3 cm viewable) FD Trinitron® CRT
?# 1920 × 1440 resolution, plus full-screen support for lower
resolutions
?# On-Screen Display (OSD) adjustments in nine different languages:
English, Dutch, French, German, Italian, Spanish, Russian,
Swedish, and Japanese for ease of set-up and screen optimization
?# Plug and Play capability if supported by your system
?# Tilt and swivel functionality
?# Kodak Color Profile (included on CD-ROM)
?# CD-ROM includes an information file (INF), Image Color
Matching file (ICM), and product documentation
?# Automatic scanning of all horizontal frequencies between 30 and
121 kHz, and vertical frequencies between 50 and 160 Hz
?# Asset Control
?# Energy Saver feature for Energy Star® compliance
?# Macintosh-compatible timing with optional connector∗
?# USB Hub (1 upstream, 4 downstream)
?# Compliance with the following regulated specifications:
❏ Swedish MPR II 1990
®
❏ EPA ENERGY STAR
❏ European Union CE Directives
❏ Swedish TCO 99 for all models
∗ A Macintosh-compatible connector is not supplied with this monitor.
English
ttttt
Part Number: 325603-001- Writer:Carol Benjamin Name - Saved by:
Pages: 16 Words: 2796 Saved date: 10/27/99 5:20 PM File Name: P1100
1-1
✎ Depending on the content of the screen, at times the shadows of
two small horizontal lines may appear on the screen. This is not
a defect and is normal for all aperture grille type displays. The
shadows are two damper wires that reduce the monitor's
susceptibility to vibration.
Universal Driver Manager
This monitor may require a graphics driver (and/or .INF file) that is
compatible with your computer’s graphics adapter. A CD-ROM
containing an .INF file is included with this monitor (see the section on
Information Files). Compaq has also created a Universal Driver
Manager (UDM) release that supports all graphics adapters found on
Compaq Deskpro and Compaq Workstation products. The UDM eases
graphics driver deployment across Compaq platforms ensuring crosscompatibility and backward-compatibility. The resulting solution
enables customers to manage and control ongoing software maintenance
costs. The UDM is available on the Compaq Support Software CD for
Compaq Desktop, Portable, and Workstation Products and the Compaq
web site (www.compaq.com).
Information Files
This monitor includes a CD-ROM with two information files that should
be installed onto your computer—an .INF file and an .ICM file. The
.INF file defines monitor resources and provides specifications used by
Microsoft Windows 95/98 to install support software for certain
hardware devices. The .INF file ensures monitor compatibility and
optimization with your computer’s graphics adapter.
The .ICM file provides color matching consistency from monitor screen
to printer and is activated from within the graphics programs that have
this feature. To install these files on your computer, insert the Compaq
CD-ROM into the computer's CD tray and follow the instructions from
the menu that appears on the monitor screen. The CD-ROM is located in
the Program License Agreement packet. INF file updates are
downloadable by clicking on:
www.compaq.com/products/monitors/index.html
1-2
English
Part Number: 325603-001- Writer: Carol Benjamin Saved by: Alyce Klingler
Pages: 16 Words: 2796 Saved date: 10/27/99 5:20 PM File Name: P1100
Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the monitor,
computer system, and other attached devices, then follow these steps:
1.
Place the monitor in a convenient, well-ventilated location near
your computer.
2.
Connect the monitor signal cable 3 to one of the two 15-pin
connectors 4 on the rear panel of the computer and tighten the
screws.
✎ Be sure the signal cable aligns with the 15-pin connector. Do
not force the cable onto the connector or you may damage the
signal cable.
3.
Connect one end of the monitor power cord 1 to the connector
on the back of the monitor and the other end 2 to an electrical
outlet that is easily accessible and close to the monitor.
English
Part Number: 325603-001- Writer: Shauna Allison - Saved by: Lynette
Saved date: 10/27/99 5:18 PM - File Name: Ch1Fitt.doc
1-3
!
WARNING: To reduce the risk of electric shock or damage
to your equipment:
„ Do not disable the power cord grounding plug. The
grounding plug is an important safety feature.
?# Plug the power cord into a grounded (earthed) electrical
outlet that is easily accessible at all times.
„# Disconnect power from the monitor by unplugging the
power cord from the electrical outlet.
„# Do not place anything on power cords or cables.
Arrange them so that no one may accidentally step on or
trip over them. Do not pull on a cord or cable. When
unplugging from the electrical outlet, grasp the cord by
the plug.
1-4
English
Part Number: 325603-001- Writer: Carol Benjamin Saved by: Alyce Klingler
Pages: 16 Words: 2796 Saved date: 10/27/99 5:20 PM File Name: P1100
Using USB Connectors
The base of the monitor has five Universal Serial Bus (USB) connectors.
Four of these connectors, 1,2,3,and 4, are for connecting USB
compatible devices such as a keyboard, mouse, or joystick to the hub.
USB connector 5 is used to connect the USB signal cable to the
computer. The USB signal cable is included with the monitor.
The following are required to operate the USB hub:
?# Your computer must be fitted with a USB port.
?# Your computer must have Microsoft Windows 95 OSR2.1 or
later, or Microsoft Windows 98 as the operating system.
English
Part Number: 325603-001- Writer: Shauna Allison - Saved by: Lynette
Saved date: 10/27/99 5:18 PM - File Name: Ch1Fitt.doc
1-5
Operating the Monitor
Front Panel Controls
No./Icon
Control
Function
1
Reset Button
Pressing this button resets the following items: Contrast,
brightness, size/center, geometry, screen, zoom, and
color. OSD Position, Color Mode, Control Lock, and
Language can not be reset.
2
Auto Adjust
Provides automatic horizontal and vertical centering and
sizing.
Input/Select
Switch
Selects either video input 1 or 2.
Brightness Button
Down arrow decreases brightness or is used to select
menu adjustment
Brightness Button
Up arrow Increases brightness or is used to select menu
adjustment.
6
Menu Button
7
Contrast Button
Launches on-screen menus and selects the functions. Also,
exits menus and on-screen display.
Left arrow decreases contrast or is used to adjust selected
OSD adjustment item.
3
1 2
4
5
1-6
English
Part Number: 325603-001- Writer: Carol Benjamin Saved by: Alyce Klingler
Pages: 16 Words: 2796 Saved date: 10/27/99 5:20 PM File Name: P1100
Continued
8
Contrast Button
Right arrow increases contrast or is used to adjust selected
OSD adjustment item
9
Power Button
Turns the monitor on and off.
:
LED
Indicates monitor mode.
1. Green LED indicates monitor is turned on.
2. Alternating Amber/Green LED indicates
Standby/Suspend.
3. Amber LED indicates Sleep Mode.
;
Light Sensor
Automatically adjusts the monitor contrast depending on
the ambient light levels.
English
Part Number: 325603-001- Writer: Shauna Allison - Saved by: Lynette
Saved date: 10/27/99 5:18 PM - File Name: Ch1Fitt.doc
1-7
On-Screen Display Settings
To adjust screen settings, press the Menu button 6 to launch the onscreen display (OSD). The OSD can be viewed in nine available
languages. The following menu shows the functions at each level:
Menu Level 1
Menu Level 2
Size/Center
Horizontal Centering
Vertical Centering
Horizontal Sizing
Vertical Sizing
Zoom
Geometry
Rotation
Pincushion
Pin Balance
Keystone
Key Balance
Convergence
Horizontal Convergence
Vertical Convergence
Vertical Convergence Top
Vertical Convergence Bottom
Screen
Landing Left Top
Landing Right Top
Landing Left Bottom
Landing Right Bottom
Moire Cancel
Color
Easy - 5000/6500/9300/adjustable
Expert - RGB Gain, RGB Bias
Color Return - optimizes screen brilliance as CRT ages.
Language
English
Francais
Deutsche
Espanol
Italiano
Nederlands
Svenska
Ðóññêèé (Russian)
(Japanese)
Degauss
OSD Horizontal Position
OSD Vertical Position
Control Lock
Light Sensor
Option
Information*
Model
Serial
Manufactured
* To get this data, press the Menu button for 5 seconds while the monitor picture is stable,
1-8
English
Part Number: 325603-001- Writer: Carol Benjamin Saved by: Alyce Klingler
Pages: 16 Words: 2796 Saved date: 10/27/99 5:20 PM File Name: P1100
How to Adjust Screen Settings
To launch the on-screen display Main Menu:
1.
Press the Menu button 3 on the monitor front panel. The Main
Menu will display on the monitor screen.
2.
To select an item from the Main Menu, scroll down by pressing
the down arrow button 1 located on the monitor front panel. To
reverse or back up, press the up arrow button 2.
3.
The item to be selected will be highlighted in yellow. Press the
Menu button 3 again.
Monitor with On-Screen Display
✎
The bar on the bottom of the OSD menu shows the current
operating frequency (and resolution if VESA standard).
English
Part Number: 325603-001- Writer: Shauna Allison - Saved by: Lynette
Saved date: 10/27/99 5:18 PM - File Name: Ch1Fitt.doc
1-9
4.
A second-level menu displays and adjustment scale. Use the
arrow keys 4 or 5 to select a value on the adjustment scale.
5.
Press the Menu button 3 to exit from that adjustment.
6.
To exit from the on-screen menu, press the Menu button again.
Press Reset to return the adjustments to their original settings.
Troubleshooting
Special OSD Messages
Special OSD messages will appear on the monitor screen when
identifying the following monitor conditions:
?# Monitor is Working out of Scan Range, Change Signal Timing
Indicates the monitor is unable to operate with the selected
input signal. Readjust your video setting to a lower resolution.
?# No Input Signal, *Activate Using the PC
*Check Input selector.
?# Monitor is Working, Check Signal Cable
Indicates the video cable may not be plugged into the
computer.
Self Diagnosis
If the screen goes blank and the LED is green, remove any video
connections from video connector 1 or 2. You can also turn off the PC.
Press the power switch twice to turn the monitor OFF then ON again.
Press the right arrow button (contrast increase) before the monitor
enters power saving mode. If a color bar pattern appears then it is likely
the problem is not the monitor. Please check the condition of your
computer. If the color bar pattern does not appear, please inform your
service representative of the monitor’s condition. If the power LED is
flashing orange, please make note of the frequency of flashing and
inform your service representative of this frequency.
1-10
English
Part Number: 325603-001- Writer: Carol Benjamin Saved by: Alyce Klingler
Pages: 16 Words: 2796 Saved date: 10/27/99 5:20 PM File Name: P1100
Adjusting Screen Quality
The optimum screen settings are factory preset. However, to change the
settings to your personal preference, allow the monitor to warm up for
30 minutes before performing the following procedures. The screen
image stabilizes after a warm-up period.
Optimizing Contrast
For best results, set your screen to a light background (such as the
Windows Desktop) before adjusting the following settings:
1.
Set the brightness control to its maximum setting, then reduce the
brightness to your preference.
2.
Adjust the contrast setting to your preference.
Optimizing Focus
The default image size is preset at the factory. The front panel controls
can be used to increase the screen size beyond the default setting.
However, expanding the screen image beyond the default settings may
degrade the focus at the outer edge of the screen.
To enhance focus, use the lowest brightness and contrast levels that
provide satisfactory results in your viewing environment.
✎ Settings that maximize contrast may not offer optimum focus,
and settings that maximize focus may not offer optimum contrast.
English
Part Number: 325603-001- Writer: Shauna Allison - Saved by: Lynette
Saved date: 10/27/99 5:18 PM - File Name: Ch1Fitt.doc
1-11
Display Resolutions
The display resolutions listed below are the most commonly used modes
and are set as factory defaults. This monitor automatically recognizes
these preset modes and they will appear properly sized and centered on
the screen.
Display Resolutions
Preset Modes
Resolutions
1. Industry Standard
640 × 480 at 60 Hz/31.5 kHz
2. VESA
640 × 480 at 85 Hz/43.3 kHz
3. Industry Standard
720 × 400 at 70 Hz/31.5 kHz
4. VESA
800 × 600 at 75 Hz/46.9 kHz
5. VESA
800 × 600 at 85 Hz/53.7 kHz
6. Macintosh-compatible
832 × 624 at 75 Hz/49.7 kHz
7. VESA
1024 × 768 at 75 Hz/60 kHz
8. VESA
1024 × 768 at 85 Hz/68.7 kHz
9. Macintosh-compatible
1152 × 870 at 75 Hz/68.7 kHz
10. VESA
1280 × 1024 at 60 Hz/63.9 kHz
11. VESA
1280 × 1024 at 75 Hz/79.9 kHz
12. VESA
1280 × 1024 at 85 Hz/91.1 kHz
13. VESA
1600 × 1200 at 70 Hz/87.5 kHz
14. VESA
1600 × 1200 at 85 Hz/106.3 kHz
15. VESA
1792 × 1344 at 60 Hz/83.7 kHz
16. VESA
1792 × 1344 at 75 Hz/106.3 kHz
17. VESA
1920 × 1440 at 60 Hz/90.0 kHz
18. VESA
1920 × 1440 at 75 Hz/112.5 kHz
When "Factory Reset" is selected by pressing the reset button. The
factory reset values will replace user changes that were made for only
the current operating mode.
✎ If the video input signal meets the Generalized Timing Formula
(GTF) the monitor will automatically provide an optimal screen
image.
1-12
English
Part Number: 325603-001- Writer: Carol Benjamin Saved by: Alyce Klingler
Pages: 16 Words: 2796 Saved date: 10/27/99 5:20 PM File Name: P1100
Maximum Refresh Rates
This monitor is capable of the maximum refresh rates listed in the
following table. However, the video adapter installed in your computer
must also be capable of supporting these refresh rates in order for them
to operate. Most of the new video adapters being shipped and sold in
computers today are capable of supporting these calculated refresh rates.
Certain video adapters may provide different timing parameters which
could result in slightly different maximum refresh rates.
Maximum Refresh Resolutions
640 × 480 at 160 Hz
800 × 600 at 160 Hz
1024 × 768 at 140 Hz
1280 × 1024 at 110 Hz
1600 × 1200 at 95 Hz
User Modes
The video controller signal may occasionally call for a mode that is not
preset if:
?# You are not using a Compaq standard graphics adapter.
?# You are not using a preset mode.
If this occurs, you may need to readjust the parameters of the monitor
screen by using the on-screen display. User changes can be made to any
or all of these modes and saved in memory. The monitor automatically
stores the new setting, then recognizes the new mode just as it does a
preset mode. In addition to the 18 factory preset modes, there are fifteen
user modes that can be entered and stored.
English
Part Number: 325603-001- Writer: Shauna Allison - Saved by: Lynette
Saved date: 10/27/99 5:18 PM - File Name: Ch1Fitt.doc
1-13
Energy Saver Feature
The energy saver feature has three different modes of operation:
■
Full Power
■
Standby/Suspend
■ Sleep
By selecting settings in the computer's Energy Saver utility, you are able
to determine the length of the inactivity period before the monitor goes
into sleep mode.
The following table describes the monitor energy saver levels available
during the different modes of operation.
Energy Saver Levels*
Mode
Power Usage
Description
Full Power
Less than 145 Watts
ON = Normal operation
Power LED is green.
Standby/Suspend
Less than 15 Watts
Monitor screen is blank. LED blinks amber
and green. There is a brief warm-up period
before returning to full power mode.
Sleep
Approximately 1 Watt
Monitor screen is blank. LED turns amber.
There is a brief warm-up period before
returning to full power mode.
Off
0 Watts
Monitor screen is blank. LED is OFF. There
is a brief warm-up period before returning
to full power mode.
Refer to your computer manual for instructions on setting energy saver
features (sometimes referred to as power management features).
✎
1-14
The energy saver features for monitors only work when
connected to computers that have energy saver features.
English
Part Number: 325603-001- Writer: Carol Benjamin Saved by: Alyce Klingler
Pages: 16 Words: 2796 Saved date: 10/27/99 5:20 PM File Name: P1100
Care and Maintenance
This section explains how to care for and maintain your Compaq
monitor during normal everyday use.
Protecting the Monitor
To protect your monitor from overheating and other types of damage,
follow these suggestions:
„#Use only a power source and connection appropriate for this
monitor, as indicated on the marking label/back plate.
?# If an extension cord or power strip is used, make sure that the cord
or strip is rated for the product and that the total ampere ratings of
all products plugged into the extension cord or power strip do not
exceed 80% of the extension cord or strip ampere ratings limit.
?# Do not overload an electrical outlet, power strip, or convenience
receptacle. The overall system load must not exceed 80% of the
branch circuit rating. If power strips are used, the load should not
exceed 80% of the power strip input rating.
?# Install the monitor near an outlet that you can easily reach.
Disconnect the product by grasping the plug firmly and pulling it
from the outlet. Never disconnect it by pulling the cord.
?# Unplug the monitor from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners.
?# Slots and openings in the cabinet are provided for ventilation.
These openings must not be blocked or covered. Never push
objects of any kind into cabinet slots or other openings.
?# Do not place plants on top of the monitor. Water or dirt from the
plant may fall into the vents.
?# Do not drop the monitor or place it on an unstable surface.
?# Do not allow anything to rest on the power cord. Do not walk on
the cord.
English
Part Number: 325603-001- Writer: Shauna Allison - Saved by: Lynette
Saved date: 10/27/99 5:18 PM - File Name: Ch1Fitt.doc
1-15
?# Keep the monitor in a well-ventilated area, away from excessive
light, heat, and moisture.
?# In a two-monitor system, place the monitors as far apart from each
other as possible to lessen interference between them.
?# Do not open the monitor cabinet or attempt to service this product
yourself. Adjust only those controls that are covered by the
operating instructions. If the monitor is not operating properly or
has been dropped or damaged, contact your Compaq authorized
dealer, reseller, or service provider.
Cleaning the Monitor
To clean the monitor, follow these steps:
1.
Turn off the monitor and the computer.
2.
Dust the monitor by wiping the screen and the cabinet with
a soft, clean cloth.
If the screen requires additional cleaning, use any antistatic CRT screen
cleaner.
CAUTION: Do not use benzene, thinner, ammonia, or any
volatile substance to clean the monitor screen or cabinet.
These chemicals may damage the monitor.
Shipping the Monitor
Keep the original packing box in a storage area. You may need it later if
you move or ship your monitor.
1-16
English
Part Number: 325603-001- Writer: Carol Benjamin Saved by: Alyce Klingler
Pages: 16 Words: 2796 Saved date: 10/27/99 5:20 PM File Name: P1100
Appendix
Agency Regulatory Notices
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
■
Reorient or relocate the receiving antenna.
■
Increase the separation between the equipment and the receiver.
■
Connect the equipment into an outlet on a circuit different from
the circuit that the receiver is connected.
■
Consult the dealer or an experienced radio or television technician
for help.
Modifications
The FCC requires the user to be notified that if any changes or modifications are made to this device, not expressly approved by Compaq
Computer Corporation, this may void the user's authority to operate the
equipment.
Cables
Connections to this device must be made with shielded cables with
metallic RFI/EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
Specifications
ttttt
Part Number: 325603-001 - WriterCarol Benjamin - Saved by: MSilvetti
Saved date: 10/27/99 5:02 PM
File Path: P:\Docs\Monitors\Colin
A-1
Declaration of Conformity for products marked
with the FCC logo - United States only
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
For questions regarding your product, contact:
Compaq Computer Corporation
P.O. Box 692000, Mail Stop 530113
Houston, Texas 77269-2000
Or, call 1-800-652-6672 (1-800-OK COMPAQ)
For questions regarding this FCC declaration, contact:
Compaq Computer Corporation
P.O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000
Or, call (281) 514-3333
To identify this product, refer to the Part, Series, or Model number
found on the product.
Canadian Notice
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Avis Canadien
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
European Notice
Products with the CE Marking comply with both the EMC Directive
(89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the
Commission of the European Community.
Compliance with these directives implies conformity to the following
European norms:
■
EN55022 (CISPR 22) - Radio Frequency Interference
■
EN61000-4-2, EN61000-4-3, EN61000-4-4 - Electromagnetic
Immunity
■
EN60950 (IEC950) - Product Safety
■
EN61000-3-2 - Power Line Harmonics
A-2
Specifications
Part Number: 325603-001 - Writer: CCB - Saved by: CCB
Saved date: 10/27/99 5:02 PM
File Path: P:\Docs\Monitors\Fittipaldi
Japanese Notice
EPA ENERGY STAR Compliance
Monitors that are marked with the ENERGY STAR Logo meet the
requirements of the EPA ENERGY STAR program. As an ENERGY STAR
Partner, Compaq Computer Corporation has determined that this product
meets the ENERGY STAR guidelines for energy efficiency. Specific
details on using the Energy Saving features can be found in the energy
saver or power management section of the computer manual.
Specifications
Part Number: 380213-001 - Writer: CCB - Saved by: CCB
Saved date: 10/27/99 5:02 PM
File Path: P:\Docs\Monitors\Fittipaldi
A-3
Specifications
Compaq P1100 Color Monitor
Display
Type
Viewable Image Size
(diagonal)
Face Treatment
21-in
Color, FD Trinitron
19.8-in
53.3-cm
50.2-cm
Antireflective and antistatic coating compliant with TCO
1999 requirements
Maximum Weight
(Unpacked)
70.4-lb
Maximum Dimensions
Height
19.9-in
Depth
19.4-in
Width
19.8-in
Maximum Graphics
Resolution
1920 × 1440 at 75Hz Refresh Rate
Aperture Grille Pitch
P22, 0.24 mm
Text Mode
720 × 400
Horizontal Frequency
30 to 121 kHz
Vertical Frequency
50 to 160 Hz
Environmental Requirements Temperature
Operating Temperature
50 to 95°F
-22 to 140°F
Storage Temperature
Humidity (Noncondensing)
Operating
20 to 80%
Nonoperating
10 to 90%
Power Source
90 - 132/195 - 255 VAC, 50-60 Hz
Power Consumption
< 160 Watts
Input Terminal
Two 15-pin D-type connectors
32.0-kg
50.6-cm
49.3-cm
50.4-cm
5 to 35°C
-20 to 60°C
Color Display Values
CIE* Chromaticity Coordinates
Red
x (+/- 0.030)
0.625
y (+/- 0.030)
0.340
Blue
0.155
0.070
Green
0.280
0.605
White Point (9300 K)
0.281
0.311
Gamma: 2.6
*Commission International d’Eclairage, 1931 Standard.
A-4
Specifications
Part Number: 325603-001 - Writer: CCB - Saved by: CCB
Saved date: 10/27/99 5:02 PM
File Path: P:\Docs\Monitors\Fittipaldi
Power Cord
If you were not provided with a power cord for your computer, you
should purchase a power cord that is approved for use in your country.
The power cord must be rated for the product and for the voltage and
current marked on the product’s electrical ratings label. The voltage and
current rating of the cord should be greater than the voltage and current
rating marked on the product. In addition, the diameter of the wire must
be a minimum of ).75 mm² or 18AWG. And the length of the cord must
be between 6 feet (1.8 m) and 12 feet (3.6 m). If you have questions
about the type of power cord to use, contact your Compaq authorized
service provider.
A power cord should be routed so that it is not likely to be walked on or
pinched by items placed upon it or against it. Particular attention should
be paid to the plug, electrical outlet, and the point where the cord exits
from the product.
Specifications
Part Number: 380213-001 - Writer: CCB - Saved by: CCB
Saved date: 10/27/99 5:02 PM
File Path: P:\Docs\Monitors\Fittipaldi
A-5
Download PDF