Compaq | dx2060 - Microtower PC | HP Compaq dc5100 Business PC Series

HP Compaq dc5100 Business
PC Series
© 2005, 2006 Hewlett-Packard Development Company, L.P.
HP and the HP logo are trademarks of Hewlett-Packard
Development Company, L.P.
Illustrated Parts Map
Microtower
All other product names mentioned herein may be
trademarks of their respective companies.
HP shall not be liable for technical or editorial errors or
omissions contained herein. The information in this
document is provided “as is” without warranty of any kind
and is subject to change without notice. The warranties for
HP products are set forth in the express limited warranty
statements accompanying such products. Nothing herein
should be construed as constituting an additional
warranty.
Standard and Optional Boards
1
System board with alcohol pad and thermal grease
403714-001
Memory Modules
2nd Edition, December 2005
1st Edition, January 2005
Document Number
376225-002
+
256 MB/400 MHz FSB
382504-001*⌧
393392-001
+
512 MB/400 MHz FSB
382509-001*⌧
393393-001
+
1 GB/400 MHz FSB
382505-001*⌧
393394-001
Intel Celeron D Processors with thermal grease and alcohol pad
+
2.66 GHz/533 MHz FSB, 256 KB cache
375361-001*⌧
391940-001
+
2.8 GHz/533 MHz FSB, 256 KB cache
375362-001*⌧
391941-001
+
2.93 GHz/533 MHz FSB, 256 KB cache
382501-001*⌧
405692-001
+
3.06 GHz/533 MHz FSB, 256 KB cache
382502-001*⌧
405693-001
+
3.2 GHz/533 MHz FSB, 256 KB cache
382503-001
Intel Pentium 4 Processors with thermal grease and alcohol pad
+
2.93 GHz/533 MHz, 1 MB Cache (517)
417904-001
+
3.06 GHz/533 MHz, 1 MB Cache (519)
407325-001
+
2.8 GHz/800 MHz, 1 MB Cache, 64 bit (521)
394643-001
+
3.0 GHz/800 MHz, 2 MB Cache, 64 bit, EIST (630)
392273-001
3.2 GHz/800 MHz, 2 MB Cache, 64 bit, EIST (640)
384786-001
3.4 GHz/800 MHz, 2 MB Cache, 64 bit, EIST (650)
384787-001
Other Cards
+
PCI Modem, International, FH bracket
398661-001
+
1394 Firewire, PCI, FH
361551-001*⌧
393308-001
Graphics Solutions
+
nVidia, Quadro NVS280, PCI, 64 MB
351384-005*⌧
398686-001
+
nVidia, Quadro NVS55, PCI, 64 MB
406412-001
+ Not shown
FH = Full height mounting bracket
+
System Unit
1
Access panel
2
3
Cables
376298-001*⌧
395969-001
1
SATA hard drive cable, 13” lg
346141-005*⌧
391738-001
Chassis
not spared
2
Front Bezel with 5.25” ODD bezel blank and lower
3.5” bezel blank 7, painted
368085-001
IDE UATA dual device, Optical Disk Drive data
cable, 14”
395964-001*⌧
383283-001
4
Power supply, PFC, 300W
405872-001
5
Diskette drive bezel, painted
372448-001
+
6
Diskette drive bezel, not painted
3.5” bezel blank, top bay, painted
3.5” bezel blank, top bay, not painted
Cable Kit, includes:
395968-001
335938-005*⌧
335938-001
3.5” bezel blank, lower (spared with 368085-001)
see 3, above
+
5.25” bezel blank, carbonite
335937-005
SATA hard drive cable, 13” lg
+
Power/LED cable with switch and switch holder
370859-001*⌧
395965-001
+
RJ-11 telephone cable (use with 361286-021)
198220-005
+
2nd Serial port with cable
392414-001
Notes:
⌧ Original Spare
Modified Spare
Mass Storage Devices (not illustrated)
365555-001*⌧
409232-001
80 GB\7200 RPM SATA hard drive
345713-005*⌧
413319-001
160 GB\7200 RPM SATA hard drive
345712-005*⌧
391741-001
250 GB\7200 RPM SATA hard drive
393303-001*⌧
391937-001
Diskette drive with mounting screws
333505-005 *⌧
392415-001
48X CD-ROM drive with mounting screws
326773-005*⌧
391730-001
52X CD-ROM drive
333969-005*⌧
413522-001
48X/32X/48X CD-RW drive
346788-005*
395272-001
48X/32X/48X+16X DVD/CD-RW drive
359493-005*
405425-001
16/40X DVD ROM drive
IDE UATA data cable
1
+Not shown
+Not shown
16X DVD+/-RW drive
Diskette drive cable
4
383182-001
7
40 GB\7200 RPM SATA hard drive
3
346141-005*⌧
405066-001
390882-001*
405760-001
325313-005*⌧
405761-001
REQUIREMENT:
For customers in countries/regions with RoHS legislation* (e.g. EU,
China, etc.) restricting the use of hazardous substances in electrical
equipment.
The use of the Original Spare part is regulated by RoHS legislation. If your
unit contains a part that is labelled with the Modified Spare number, the
Modified Spare must be ordered as the replacement part.
If your unit contains a part that is labelled with the Original Spare number,
please order the Original Spare as the replacement part. In this case either
the Original Spare or the Modified Spare may be shipped which will not
affect performance or functionality of the unit.
*Directive 2002/95/EC restricts the use of lead, mercury, cadmium,
hexavalent chromium, PBBs and PBDEs in electronic products. Countries/
regions outside the EU, e.g. China, are introducing similar legislation. References to ‘RoHS legislation’ means requirements of Directive 2002/95/EC
or similar substance restrictive legislation enacted by any country/region
outside the EU. or similar substance restrictive legislation enacted by any
country/region outside the EU.
See next page for keyboard spares
Miscellaneous Parts
1
Speaker
326776-005*⌧
399871-001
2
Chassis fan
366641-001*⌧
392412-001
3
Heatsink with fan, alcohol pad, and thermal grease
381884-001*⌧
418806-001
4
Front I/O device with cable
377461-001*⌧
395966-001
+
Real-time clock battery
153099-001
+
Rubber foot (4 ea)
370708-001
Mouse
+
2-Button, PS/2 with scroll wheel
323614-005 *⌧
390937-001
+
2-Button, USB, with scroll wheel
323615-005*⌧
390939-001
+
2-Button, USB, optical with scroll wheel
323617-005*⌧
390938-001
Miscellaneous screw kit, includes:
+
330458-001*⌧
414180-001
M3 x 5mm Full slot hi top, taptite (4 ea) (263585-001)
+
#6-32 x 1/4 Hi top, taptite (4 ea) (262508-001)
+
#6-32 x 5/16 Hi top, taptite (2 ea) (262508-002)
+
#6-32 x 3/32 Hi top, taptite (4 ea) (262508-003)
+
#6-32 x 3/8 Taptite with washer (1 ea) (114399-069)
+
#6-32 x 1/4 Thumbscrew (1 ea) (124702-004)
+
Countersunk, flat head plastite (1 ea) (247481-001)
+Not shown
Standard Keyboard (not illustrated)
Computer Diagnostic LEDs (on front of computer)
PS/2, Basic
USB, Basic
USB, Modular
355630-xxx*⌧, 382925-xxx
355631-xxx*⌧, 382926-xxx
355102-xxx*⌧
LED
Color
LED/Beep Activity
State/Message
Power
Green
On
(S0) Computer on
Arabic
-175
Japanese
-295
Power
Green
1 blink every 2 seconds
(S1) Suspend mode
Belgian
-185
Korean (Hanguel)
-KD5
Power
Green
1 blink every 2 seconds
(S3) Suspend to RAM
-165
Power
Clear
Off
(S4) Hibernation
Clear
Off
(S5) Computer off
BHCSY
-B45
LA Spanish
Brazilian Portuguese
-205
Netherlands[1]
-335
Power
Czech
-225
Norwegian
-095
Power
Red*
2 blinks and beeps 1 second
apart
CPU thermal shutdown
Danish
-085
PRC
-AA5
Power
Red*
-025
Polish[1]
-245
3 blinks and beeps 1 second
apart
CPU not installed
Europe[1]
Finnish
-355
Portuguese
-135
Power
Red*
4 blinks and beeps 1 second
apart
Power supply overload (crow bar)
French
-055
Russian
-255
Power
Red*
-DE5
Slovakian
-235
5 blinks and beeps 1 second
apart
Bad memory
French Arabic
French Canadian[2]
-125
Spanish
-075
Power
Red*
6 blinks and beeps 1 second
apart
Graphics adapter error
German
-045
Swedish[5]
-101
Power
Red*
-155
Swedish[4]
-105
7 blinks and beeps 1 second
apart
System board failure (detected prior to video)
Greek
Hebrew[1]
-BB1
Swiss
-115
Power
Red*
Invalid ROM checksum
Hebrew[2]
-BB5
Taiwanese[3]
-AB5
8 blinks and beeps 1 second
apart
Hungarian
-215
Thai
-285
Power
Red*
9 blinks and beeps 1 second
apart
System not fetching code
International[2]
-B35
Turkish
-145
Power
Red*
-065
U.K.
-035
10 blinks and beeps 1 second
apart
System hang while loading an option ROM
Italian
Hard Drive
Green
Blinking
Hard drive activity
[1] For 355102 only
[2] Not for 355102
[3] Not for 355631
[4] Not for 355630
[5] For 355630 only
*Blinking codes are repeated after a 2 second pause. Beeps stop after fifth iteration, but LEDs continue until problem is
resolved.
USB Basic Keyboard (not illustrated)
Keyboard Diagnostic LEDs (PS/2 Keyboards Only)
Gray and carbonite
LED
Color
LED Activity
State/Message
Green
On (Rising Tone)
ROM reflashed successfully.
Green
On
ROMPaq diskette not present, is bad, or drive
not ready.*
355632-xxx*⌧
382927-xxx
Belgian
-185
International[2]
-B35
Num, Caps,
Scroll Lock
Danish
-085
Italian
-065
Num Lock
French
-055
Swedish[4]
-105
German
-045
Swiss
-115
Green
On
Enter password.
Num, Caps,
Scroll Lock
Green
Blink On in sequence, one at a
time - N, C, SL
Keyboard locked in network mode.
* Insert valid ROMPaq diskette in drive A. Turn power switch off, then on to reflash ROM. If ROM flash is successful, all
three keyboard LEDs will light up, and you will hear a rising tone series of beeps. Remove diskette and turn power off,
then on to restart the computer. For more information about flashing the ROM, refer to the Troubleshooting guide.
SmartCard Keyboard (not illustrated)
Gray and carbonite
Caps Lock
393670-001
Clearing CMOS
The computer's configuration (CMOS) may occasionally be corrupted. If it is, it is necessary to clear the CMOS
memory using switch SW50.
To clear and reset the configuration, perform the following procedure:
1. Prepare the computer for disassembly.
Ä
2.
3.
4.
5.
CAUTION: The power cord must be disconnected from the power source before pushing the Clear CMOS
Button (NOTE: All LEDs on the board should be OFF). Failure to do so may damage the system board.
Remove the access panel.
Press the CMOS button located on the system board, and keep it depressed for 5 seconds.
Replace the access panel.
Turn the computer on and run F10 Computer Setup (Setup utility) to reconfigure the system.
Disabling or Clearing the Power-On and Setup Passwords
1.
2.
3.
4.
5.
6.
7.
8.
Refer to the Computer Setup (F10 Setup) instructions to establish new passwords.
System Board Connectors and Jumpers (position of some untitled components may vary in location)
CR1
5CV Aux power LED
P20
Primary IDE
E49
Password jumper
P23
Front audio/USB
J20
PCI slot 1
P24
Front USB header
J21
PCI slot 2
P52
Flying Serial Port
J31
PCI Express x1
P60
Primary Serial ATA (SATA) connector
P1
Main power (20 pin)
P61
Second Serial ATA (SATA) connector
P3
CPU regulator power (4 pin)
P70
CPU fan
P5
Front panel
SW50
CMOS button
P6
Internal chassis speaker
XBT2
Battery
P7
CD audio in
XMM1
Memory socket
P8
Chassis fan
XMM2
Memory socket
P10
Diskette drive
XMM3
Memory socket
P11
Aux audio in
XMM4
Memory socket
P14
Boot Block
XU1
Processor socket
System Hardware Interrupts
IRQ
System Function
IRQ
0
Timer Interrupt
8
System Function
Real-Time Clock
1
Keyboard
9
Unused
2
Interrupt Controller Cascade
10
Unused, available for PCI
3
Serial Port (COM B)
11
Unused, available for PCI
4
Serial Port (COM A)
12
Mouse
5
Unused, available for PCI
13
Coprocessor
6
Diskette Drive
14
Primary ATA (IDE) Controller
7
Parallel Port (LPT 1)
Turn off the computer and any external devices, and disconnect the power cord from the power outlet.
Remove the access panel.
Locate the header and jumper labeled E49.
Remove the jumper from pins 1 and 2. Place the jumper over pin 2 only, in order to avoid losing it.
Replace the access panel.
Plug in the computer and turn on power. Allow the operating system to start.
NOTE: Placing the jumper on pin 2 clears the current passwords and disables the password features.
To re-enable the password features, repeat steps 1-3, then replace the jumper on pins 1 and 2.
Repeat steps 5-6, then establish new passwords.
Computer Setup (F10) Utility Features (features may vary)
File
System Information
About
Set Time and Date
Replicated Setup
Default Setup
Apply Defaults and Exit
Ignore Changes and Exit
Save Changes and Exit
Storage
Device Configuration
Storage Options
DPS Self-Test
Boot Order
Security
Setup Password
Power-On Password
Password Options
Smart Cover
Embedded Security
Drivelock Security
Data Execution Prevention
Master Boot Record Security
Save Master Boot Record
Restore Master Boot Record
Device Security
Network Service Boot
System IDs
Power
OS Power Management
Hardware Power Management
Thermal
Advanced
Power-On Options
BIOS Power On
Onboard Devices
PCI Devices
Bus Options
Device Options
PCI VGA Configuration
Download PDF