Section D - Energy Management Devices

Section D - Energy Management Devices
SECTION
D
Energy
Management
Products
INDEX
Energy Management Products Index
Occupancy Sensor LightIng Controls
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .D2
Decora Wall Switch Infrared Occupancy Sensors . .D3-D6
Decora Dual-Relay Wall Switch Infrared
Occupancy Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . .D4
Decora Wall Switch Multi-Tech Occupancy Sensor . . .D4
Manual-ON Wall Switch Occupancy Sensor . . . . . . . .D6
Self-Contained Fixture Mount Occupancy Sensor . . . .D7
Power Base Adaptor . . . . . . . . . . . . . . . . . . . . . . . . . .D8
Self-Contained Infrared Ceiling Mount
Occupancy Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . .D9
Multi-Tech Ceiling Mount Occupancy Sensor . . . . . .D10
Ultrasonic Ceiling Mount Occupancy Sensor . . . . . . .D11
Infrared Ceiling Mount Occupancy Sensor . . . . . . . .D12
Multi-Tech Wall Mount Occupancy Sensor . . . . . . . .D13
Infrared Wide-View Wall Mount Occupancy Sensor . .D14
Infrared High-Bay Wall Mount Occupancy Sensor . . .D14
Infrared Long-Range Wall Mount Occupancy Sensor . .D14
Power Packs for Occupancy Sensors . . . . . . . . . . . .D15
Infrared Outdoor Motion Sensors . . . . . . . . . . . . . . . .D16
Centura System
Centura® Fluorescent Energy
Management System . . . . . . . . . . . . . . . . . . . .D17, D18
Timed Lighting Controls
DecoraPlus Electronic Timer Switches . . . . . . . . . . . .D19
Decora Programmable Electronic Timer Switches . . .D20
Variable Countdown Timer Switch . . . . . . . . . . . . . . .D20
Z-MAX Relay Lighting Control Systems . . . . . . . .D21-D27
Z-MAX Relay Cabinets . . . . . . . . . . . . . . . . . . . .D22, D23
RRP-Remote 4-Relay Panel . . . . . . . . . . . . . . . . . . .D24
EZ-MAX Relay Cabinets . . . . . . . . . . . . . . . . . . . . . . .D25
Z-MAX Digital and Low Voltage Switch Stations . . . . .D26
miniZ™ Intelligent Daylight Management System . . .D27
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
OCCUPANCY SENSOR LIGHTING CONTROL FEATURES
Commercial and Residential Grade Energy Management Products
LEVITON OFFERS A RANGE OF PRODUCTS THAT REDUCE ENERGY COSTS WHILE INCREASING COMFORT AND SECURITY.
The modular Centura® Fluorescent Energy Management system offers "daylight harvesting" in commercial buildings
through the use of photo sensors, occupancy sensors, dimmers and a PC-based lighting control interface. Occupancy
Sensors provide convenient, hands-free lights-ON/lights-OFF switching either independently or as part of the Centura
system. Leviton's residential and commercial grade Electronic Timers reduce energy bills and can provide a "lived-in
look" for added home security. Z-MAX™ timed relay lighting control panels combine time clock and switching contactor
functions with innovative technology for advanced scheduling of lighting and other loads in commercial, educational
and outdoor areas.
Occupancy Sensor Lighting Controls
Leviton offers a variety of space-monitoring Occupancy Sensor Lighting Controls for virtually any room, facility, home
or office. Wall or ceiling mount, with passive infrared, ultrasonic or multi-technology sensing; end-users will benefit
from the energy savings, convenience and security provided by Leviton Occupancy Sensors.
PIR sensors detect
IR signal
Photocell detects light to
enable energy-saving
ambient light override
Energy Management Products
Adjustable blinders
block peripheral signals
Fresnel lens for
optimal field of view
Features and Benefits
I Adjustable delayed-OFF and/or self-
adjusting delayed-OFF interval compensates for occupancy patterns—preventing
unnecessary ON/OFF switching
I Many with self-adjusting settings that continuously analyze and adjust for optimum
performance
I Advanced passive infrared (PIR) technology
for monitoring obstruction-free areas
I Advanced ultrasonic sensing technology for
highly accurate small-motion monitoring
I For use with incandescent or fluorescent
lighting
I Backed by a Limited Five-Year Warranty
Time, range
and light
adjustments
Ground clip to
ensure solid
connection
LED indicator flashes when
sensor detects motion
Wall-Switch Occupancy Sensor
Push button for
manual ON/OFF
OCCUPANCY SENSOR LIGHTING CONTROLS FOR COMMERCIAL AND RESIDENTIAL APPLICATIONS
D
Decora® Wall-Switch
Infrared Occupancy
Sensor
Features automatic
“walk-through” sensing
and self-adjusting
delayed-OFF. Dual relay
versions available.
ODS15-IDW shown
Self-Contained
Infrared Ceiling-Mount
Occupancy Sensor
Features built-in relay
and 360º coverage.
For small spaces.
ODC0S-I1W shown
Multi-tech Ceiling-Mount
Occupancy Sensor
IR and ultrasonic
combine for accurate
monitoring while minimizing false triggers.
For larger, open areas.
Self adjusting.
OSC20-M0W shown
Ultrasonic Ceiling-Mount
Occupancy Sensor
Highly accurate smallmotion detection. Selfadjusting sensitivity
and time off.
OSC05-U0W shown
Wall-Mount
Occupancy Sensor
Available with multitechnology sensing or IR
wide-view, high-bay and
long-range versions.
Fits in corner.
OSW12-M0W shown
Infrared Outdoor
Motion Sensor
Adjustable delayedOFF plus sensitivity to
reduce false triggers.
For commercial
and residential
applications.
PS200 shown
more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
2Courtesy of Steven Engineering,To learn
Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
DECORA® OCCUPANCY SENSOR LIGHTING CONTROLS • WALL SWITCH
Commercial and Residential Grade Energy Management Products
Wall Switch Occupancy Sensor Lighting Controls
Decora Wall Switch Infrared Occupancy Sensor (Incandescent or Fluorescent) U R
COLOR*
I, W, A, T, G
I, W, A, T, G
2.60 (66.1)
Decora Wall Switch
ODS15-ID
PIR Occupancy Sensor
with Self-Adaptive Technology,
180˚ field of view, 2100 sq. ft
Decora Wall Switch PIR
OSSNL-ID
Occupancy Sensor with LED
Night Light, 180˚ field of view,
1200 sq. ft (neutral required)
CEC Title 24 Compliant Decora
OSS10-ID
Wall Switch PIR Manual-ON
Sensor with LED Night Light,
180˚ field of view, 1200 sq. ft (neutral required)
RATING
Incandescent: 800W @ 120V,
Fluorescent: 1200VA @ 120V,
2700VA @ 277V.
For 60 Hz AC only.
Motor: 1/4 HP @ 120V
Incandescent: 1800W @ 120V.
Fluorescent: 1800VA @ 120V,
4000VA @ 277V.
Motor: 1/4 HP @ 120V
Incandescent: 800W @ 120V
Fluorescent: 1200VA @ 120V
2700VA @ 277V
Motor: 1/8HP @ 120V
Incandescent: 800W @ 120V
Fluorescent: 1200VA @ 120V
2700VA @ 277V
Motor: 1/8HP @ 120V
4.06 (103.2)
CAT. NO.
ODS10-ID
3.28 (83.3)
DESCRIPTION
Decora Wall Switch
PIR Occupancy Sensor,
180˚ field of view, 2100 sq. ft
I, W, A, T, G
1.75 (44.4)
I, W, A, T, G
1.35
(34.3)
ODS15-IDW
40
2.66
(67.5)
TOP VIEW
4.11
(104.4)
30
15
0
1.75
(44.5)
15
OSSNL-IDW/OSS10-IDW
30
Major Motion, IR
Minor Motion, IR
40
5
4
0
Energy Management Products
1.35
(33.6)
SIDE VIEW
0
15
40
ODSXX-ID/OSSXX-ID Field of View (in feet)
SPECIFICATIONS AND FEATURES
All ODS Wall Switch Sensors
• Ambient light override prevents these devices from
switching lights ON when there is ample natural sunlight
• Push-button manual override is used to turn lights ON
at any time, regardless of the override setting
• 180° field of view, 2100 sq. ft. of coverage
• One unit can be used for 120V or 277VAC 60Hz incandescent, low voltage and fluorescent lighting with either
magnetic or electronic ballasts, and motor loads
• Fits in standard wallbox; gangable
• Elegant Decora styling; uses Decora wallplate
ODS15-ID PIR Occupancy Sensor
• For use in small offices, conference rooms, classrooms,
stockrooms, lounges, restrooms, warehouses and commercial areas
• Exclusive automatic “Walk-Through” sensing increases
energy savings by shutting lights within 21⁄2 minutes
after momentary occupancy
• Delayed-OFF time interval (5, 10 and 20 minutes)
compensates for real-time occupancy patterns, preventing unnecessary ON/OFF switching—with 30-second
test mode
ODS10-ID PIR Occupancy Sensor
• For use in enclosed offices, storage rooms, copier
rooms and closets
• Delayed-OFF time settings: 10, 20 and 30 minutes with
30-second test mode
All Night Light Wall Switch Sensors
• For use in conference rooms, classrooms, small
offices, lounges, hotel/hospital/office restrooms
• 180˚ field of view, 1200 sq. ft. of coverage
• Night light with dim feature
OSSNL-ID PIR Occupancy Sensor
• Manual delayed-OFF time settings: 30 seconds,
30 minutes, 1 hour, 2 hours
OSS10-ID PIR Occupancy Sensor
• Manual delayed-OFF time settings: 30 seconds to
30 minutes
• Manual ON/Auto OFF operation for CEC Title 24
Compliance
TESTING AND CODE COMPLIANCE
•
•
•
•
•
UL Listed (File #E-118904)
CSA Certified (File #LR-91148M)
NOM Certified (#057)
Conforms to California Title 24 Energy Code
Backed by a Limited Five-Year Warranty
*COLOR
Colors available as listed, add suffix to catalog
number as follows: Ivory (-I), White (-W), Almond
(-A), Light Almond (-T), Gray (-G).
MATERIAL CHARACTERISTICS
Operating Temperature: 0°C to 50°C
Storage Temperature: -10°C to 85°C
Relative Humidity: 20% to 90% non-condensing
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
D
3
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
DECORA® OCCUPANCY SENSOR LIGHTING CONTROLS • WALL SWITCH
Commercial Grade Energy Management Products
Wall Switch Occupancy Sensor Lighting Controls
Dual-Relay Decora Wall Switch Infrared Occupancy Sensor U R
1.35
(33.6)
2.66
(67.5)
4.11
(104.4)
Energy Management Products
DESCRIPTION
1.75
(44.5)
ODS0D-IDW/ODS0D-TDW
CAT. NO.
PHOTOCELL
CONTROL OPTIONS
PER RELAY
Dual-Relay Decora ODS0D-ID Default Setting:
Wall Switch PIR
Conference Room Mode
Occupancy Sensor
(Both Primary and Secondary
with Self-Adaptive
Relays respond to
Technology,
Ambient Light Override.)
180˚ field of view,
Alternate Setting:
2100 sq. feet
Classroom Mode
(Primary Relay only
responds to Ambient
Light Override.)
Dual-Relay Decora ODS0D-TD Primary Relay provides
Wall Switch PIR
Automatic ON switching
Occupancy Sensor
and responds to Ambient
with Self-Adaptive
Light Override. Secondary
Technology. Secondary
Relay provides Manual-ON
relay provides Manualswitching only
ON only for CEC Title 24
compliance, 180˚ field
of view, 2100 sq. ft
RATING
COLOR*
Primary Relay:
Fluorescent: 1200VA @ 120V,
2700VA @ 277V.
Incandescent: 800W @ 120V.
Secondary Relay:
Fluorescent: 800VA @ 120V,
1200VA @ 277V.
Incandescent: 800W @ 120V
I, W, A, T, G
Primary Relay:
Fluorescent: 1200VA @120V,
2700VA @ 277V.
Incandescent: 800W @ 120V.
Secondary Relay:
Fluorescent: 800VA @ 120V,
1200VA @ 277V.
Incandescent: 800W @ 120V
I, W, A, T, G
Decora Wall Switch Multi-Tech (PIR & US) Occupancy Sensors U R
DESCRIPTION
Decora Wall Switch Multi-Tech
Occupancy Sensor with
Self-Adaptive Technology,
180˚ field of view, 1200 sq. ft
1.35
(33.6)
CAT. NO.
OSSMT-MD
RATING
COLOR*
Incandescent/Tungsten:
I, W, A, T, G
800W @ 120V
Fluorescent: 1200VA @ 120V,
2700VA @ 277V
Motor: 1/4HP @ 120V
40
TOP VIEW
2.66
(67.5)
4.11
(104.4)
30 ft (9.1 m)
30
20 ft (6.1 m)
minor motion
15
20 ft (6.1 m)
minor motion
0
40 ft
(12.2 m)
15
1.75
(44.5)
OSSMT-MD
Multi-Tech Sensor
30
Major Motion, IR
Minor Motion, IR
40
5
4
0
OSSMT-MD Field of View (in feet)
SIDE VIEW
15
0
40
ODS0D-ID, -TD Field of View (in feet)
SPECIFICATIONS AND FEATURES
Dual-Relay PIR Occupancy Sensors
• Ideal for classrooms, multimedia and conference
rooms, day care centers, office, and lounges
• Exclusive automatic “Walk-Through” sensing
• Provides automatic switching for 2 separate banks of
fluorescent, incandescent, or low-voltage lighting from a
single unit
• Delayed-OFF time interval (5, 10 and 20 minutes)
compensates for real-time occupancy patterns, preventing unnecessary ON/OFF switching—with 30-second
test mode
• ODS0D-TD provides Manual-ON/Auto-OFF operation
for CEC Title 24 compliance
OSSMT-MD Multi-Tech Occupancy Sensor
• Ideal in offices, conference rooms, storage areas,
restrooms, classrooms and lounges
D
• Combines passive infrared and ultrasonic technologies to provide maximum sensitivity with immunity to
false triggering
• Ambient light override prevents lights from turning
ON when there is ample natural light
• Exclusive automatic “Walk-Through” sensing
• Manual delayed-OFF time settings (30 seconds to
30 minutes)
• Manual-ON/Auto-OFF setting for CEC Title 24
compliance
*COLOR
Colors available as listed, add suffix to catalog
number as follows: Ivory (-I), White (-W), Almond
(-A), Light Almond (-T), Gray (-G).
MATERIAL CHARACTERISTICS
Operating Temperature: 0°C to 50°C
Storage Temperature: -10°C to 85°C
Relative Humidity: 20% to 90% non-condensing
TESTING AND CODE COMPLIANCE
•
•
•
•
•
•
UL Listed (File #E-118904)
Cat. No. ODS0D-ID is CUL/US Certified
CSA Certified (File #LR-91148M)
NOM Certified (#057)
Conforms to California Title 24 Energy Code
Backed by a Limited Five-Year Warranty
more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
4Courtesy of Steven Engineering,To learn
Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
DECORA® OCCUPANCY SENSOR LIGHTING CONTROLS • WALL SWITCH
Residential Grade Energy Management Products
Wall Switch Occupancy Sensor Lighting Controls
Decora Wall Switch Infrared Occupancy Sensor U R
PR150-1L
COLOR*
I, W, A
I, W, A
2.60 (66.1)
Decora Wall Switch PIR Occupancy Sensor,
Single-Pole, 150° field of view, 350 sq. ft
RATING
Incandescent: 500W,
Rapid Start Magnetic
Fluorescent only:
400VA @ 120V AC,
Incandescent: 500W,
Rapid Start Magnetic
Fluorescent only:
400VA @ 120V AC,
4.06 (103.2)
CAT. NO.
PR180-1L
3.28 (83.3)
DESCRIPTION
Decora Wall Switch PIR Occupancy Sensor,
Single-Pole & 3-Way, 180° field of view,
400 sq. ft
1.75 (44.4)
1.35
(34.3)
PR180-ILW
TOP VIEW
10
10
0
0
10
10
SIDE VIEW
SIDE VIEW
5
4
5
4
0
0
0
20
PR150-1L Field of View (in feet)
SPECIFICATIONS AND FEATURES
• PR180 with 180° field of view, 400 sq. ft. of
coverage: For use in large rooms, home offices,
and a variety of light commercial and residential
applications
• PR150 with 150° field of view, 350 sq. ft. of
coverage: For use in residential applications
• Ambient light override prevents these devices from
switching lights ON when there is ample natural
sunlight
• Manual override for use as a standard ON/OFF
switch
• Adjustable delayed-OFF time interval (15 seconds to
15 minutes)
• Fits in standard wallbox; gangable
• Elegant Decora styling; uses Decora wallplate
0
20
PR180-1L Field of View (in feet)
Energy Management Products
TOP VIEW
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-118904)
• CSA Certified (File #LR-91148M)
• Backed by a Limited Two-Year Warranty
*COLOR
Colors available as listed, add suffix to catalog number
as follows: Ivory (-I), White (-W), Almond (-A).
MATERIAL CHARACTERISTICS
Operating Temperature: 0°C to 50°C
Storage Temperature: -10°C to 85°C
Relative Humidity: 20% to 90% non-condensing
D
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
5
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
DECORA® OCCUPANCY SENSOR LIGHTING CONTROLS • WALL SWITCH
Residential Grade Energy Management Products
1.35
(34.3)
2.60
(66.1)
4.06
(103.2)
Energy Management Products
Manual-ON Wall Switch Occupancy Sensor Lighting Controls
Decora Manual-ON Wall Switch Infrared Occupancy Sensor U R
DESCRIPTION
Decora Manual-ON Wall Switch PIR
Occupancy Sensor, CEC Title 24
Compliant, Single-Pole, 3-Way or more
when used with IPP0R Sensor Remote or
Vizia Switch Remote, 180˚ field of view,
900 sq. ft (neutral required)
Decora Manual-ON Occupancy
Sensor Remote, 180˚ field of
view, 900 sq. ft (neutral required)
Vizia™ Matching Switch
Remote, lighted (neutral required)
Vizia™ Coordinating Switch
Remote, unlighted (neutral required)
1.75
(44.4)
IPP15-ILW
CAT. NO.
IPP15-1L
RATING
Incandescent: 1800W,
Fluorescent: 1800VA
at 120V AC,
Motor: 1/2 HP @ 120V AC
COLOR*
I, W, A, T, E
IPP0R-1L
I, W, A, T
VZ0SR-1L
120V AC–No load rating,
For use with IPP15 Sensor
or Vizia Dimmers
120V AC – No load rating
VZ0SR-10
120V AC – No load rating
X (I, W & A),
Z (I, W & T)
X (I, W & A),
Z (I, W & T)
TOP VIEW
30
15
0
15
30
5
4
SIDE VIEW
0
0
15
30
IPP15-IL Field of View (in feet)
SPECIFICATIONS AND FEATURES
• Manual-ON/Automatic OFF operation in accordance
with California Title 24 2005 requirements
• 180˚ field-of-view provides approximately 900 sq. ft. of
coverage suitable for bathrooms, basements, garages,
utility rooms, and a variety of other residential areas
• Low-profile design eliminates an obtrusive “scanningdevice” look
• Elegant Decora styling complements any interior and
coordinates with Leviton’s popular line of Decora
wiring devices and Vizia lighting controls
• IPP15 provides a true 3-Way feature when used with
the IPP0R Manual-ON Occupancy Sensor Remote or
the VZ0SR Vizia Switch Remote
• Convenient push-button provides Manual ON/OFF
light switching at any time
• Segmented Fresnel lens provides optimum sensitivity
and performance
• Horizontal field of view may be adjusted between
180˚ and 32˚ of arc by using integral blinders located
on either side of the lens
• Four optional manual adjustments for delayed-OFF
time settings maximize energy savings: 30 seconds
(for walk test), 5 minutes, 15 minutes and 30 minutes
• LED indicator light flashes when sensor detects
motion to verify detection is active
• Fits in standard wallbox
• Requires a neutral (white) wire connection
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-118904)
• CSA Certified (File #LR-152105)
• Conforms to California Title 24 Energy Code and
FCC regulations
• Backed by a Limited Five-Year Warranty
*COLOR
Colors available as listed, add suffix to catalog
number as follows: Ivory (-I), White (-W), Almond
(-A), Light Almond (-T) and Black (-E). Vizia Switch
Remotes come packaged with three colors. Controls
with suffix (-X) include White, Ivory and Almond.
Controls with suffix (-Z) include White, Ivory and
Light Almond.
MATERIAL CHARACTERISTICS
Operating Temperature: 0°C to 50°C
Storage Temperature: -10°C to 85°C
Relative Humidity: 20% to 90% non-condensing
D
more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
6Courtesy of Steven Engineering,To learn
Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
OCCUPANCY SENSOR LIGHTING CONTROLS • FIXTURE MOUNT
Commercial Grade Energy Management Products
Self-Contained Infrared Fixture-Mount Occupancy Sensor
DESCRIPTION
Self-Contained Fixture-Mount
High Bay Occupancy Sensor
with 360˚ open area lens and
60 x 20 ft. aisle pattern lens
CAT. NO.
OSFHU-ITW
RATING
Fluorescent: 800VA
@ 120V,
1200VA @ 277V,
1500VA @ 347V
Motor: 1/4HP @
120V
Offset Adapter Accessory
for High Bay Fixture-Mount
Occupancy Sensor
OSF0A-00W
––
MOUNTING HEIGHT
COLOR
360˚ lens:
White
40 ft with 60 ft dia.
30 ft with 50 ft dia.
20 ft with 50 ft dia.
Aisle lens:
40 ft with 60 ft (length)
x 20 ft (width)
––
White
Aisle Lens
3.50
(88.9)
3.50
(88.9)
1.25
(31.8)
OSFHU-ITW
OSFHU-ITW 360° Field of View (in feet)
OSF0A
Energy Management Products
360˚ Lens
OSFHU-ITW Aisle Field of View (in feet)
SPECIFICATIONS AND FEATURES
• Ideal in commercial facilities with high ceilings,
including warehouses, manufacturing and others
• Mounts directly to industrial-style fluorescent
luminaires or electrical junction box
• Provided with an open area 360˚ lens installed in
the sensor and an interchangeable 60 x 20 ft. aislepattern lens
• Self-contained PIR sensor and relay turn individual
fixtures ON/OFF based on occupancy
• Accommodates high-bay 20-40 ft. mounting heights
• Relay uses zero-crossing circuitry for enhanced reliability and long-life operation
• Delayed-OFF time adjustment from 30 seconds to
20 minutes
• Two-piece accessory offset adapter (Cat. No. OSFOA00W) that snaps into a 1⁄2" knockout on the end of an
industrial fixture is also available
• Adapter allows positioning of the sensor below the
fixture body to improve field of view for deep body
fixtures
TESTING AND CODE COMPLIANCE
•
•
•
•
UL and cUL Listed
California Title 24 Compliant
FCC Compliant
Backed by a Limited Five-Year Warranty
D
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
7
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
OCCUPANCY SENSOR LIGHTING CONTROLS • POWER BASE ADAPTOR
Commercial Grade Energy Management Products
Self-Contained Power Base Adaptor
Power Base Adaptor
Converts any Leviton low voltage ceiling or wall-mount occupancy sensor to a self-contained, line voltage
unit with 15A, 120/277V load capacity
Power Base Adaptor U
Ø4.50
(114.3)
DESCRIPTION
CAT. NO.
Power Base Adaptor
OPB15-0DW
POWER
INPUT/OUTPUT
Power Input:
120/277VAC
Control Output:
24VDC, 40mA
RATING
COLOR
15A Incandescent,
Electronic or
Magnetic
Fluorescent Ballast
White
1.75
(44.5)
Energy Management Products
OPB15-ODW
Load
Neutral (White)
Hot (Black)
120/277V
Load (Blue)
OPB15 Power Base
Any Leviton Low-Voltage
Ceiling Sensor
OPB15-0DW Power Base Adaptor Wiring Diagram
SPECIFICATIONS AND FEATURES
• Ideal for use in lavatories, remodels, hard ceiling
spaces, energy conservation retrofits and any
installation with limited access for low-voltage
wiring
• Patent-pending design converts Leviton low-voltage
ceiling sensors to line voltage
• Ideal for both existing buildings with limited access
to low-voltage wiring and new construction with
line-voltage circuiting only
• Mounts easily in a standard 2.125" deep x 4" octagon or 2.125" deep x 4" square electrical box with
a 2-gang mud ring; flying leads provide fast line
voltage connections
• Two-piece terminal block provides fast, easy lowvoltage connections to the sensor
• Relay uses zero-crossing circuitry for enhanced
reliability and long-life operation
TESTING AND CODE COMPLIANCE
• UL and cUL Listed
• NOM Certified
• California Title 24 Compliant
• Backed by a Limited Five-Year Warranty
D
more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
8Courtesy of Steven Engineering,To learn
Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
OCCUPANCY SENSOR LIGHTING CONTROLS • CEILING MOUNT
Commercial Grade Energy Management Products
Ceiling-Mount Occupancy Sensor Lighting Controls
PIR Occupancy Sensor with built-in relay—Separate Power Pack not required
DESCRIPTION
Self-Contained Ceiling-Mount
Infrared Occupancy Sensor
and Switching Relay
CAT. NO.
ODC0S-I1W
Self-Contained Ceiling-Mount
Infrared Occupancy Sensor
and Switching Relay
ODC0S-I2W
Self-Contained Ceiling-Mount
Infrared Occupancy Sensor
and Switching Relay
Protective Cage
ODC0S-I7W
RATING
Incandescent:
1000W @ 120V.
Fluorescent:
1000VA @ 120V.
1 HP @ 120V
For 60Hz AC only
Incandescent:
1000W @ 220V.
Fluorescent:
500VA @ 220V.
For 50Hz AC only
Fluorescent:
2700VA @ 277V.
For 60Hz AC only
—
ODCCG
COVERAGE
360°, 530 sq. ft
COLOR
White
360°, 530 sq. ft
White
360°, 530 sq. ft
White
—
Ø4.30 (109.2)
Self-Contained Infrared Ceiling-Mount Occupancy Sensor U R
2.15
(54.6)
White
ODC0S-I1W
13
0
13
SIDE VIEW
8
0
13
7
3
0
3
7
13
ODC0S-I Field of View (in feet)
SPECIFICATIONS AND FEATURES
• Ideal for use in storage areas, small bathrooms,
copy rooms and a variety of small spaces without
wall switches
• Full 360° view of a 530 sq. ft. area when surface
mounted on standard, 8-foot ceiling
• Sensor and switching relay combined in a single
self-contained unit—No control unit required
• Ambient light override option prevents lights from
turning ON when there is ample natural light
• Adjustable Delayed-OFF time settings from
20 seconds (for test mode) to 15 minutes
• Small, unobtrusive self-contained unit: 4.3"
(109.2 mm) diameter
Energy Management Products
TOP VIEW
TESTING & CODE COMPLIANCE
• UL Listed and CSA Certified
• California Title 24 compliant and meets ASHRAE
Standard 90.1 requirements
• Backed by a Limited Five-Year Warranty
D
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
9
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
OCCUPANCY SENSOR LIGHTING CONTROLS • CEILING MOUNT
Commercial Grade Energy Management Products
Ceiling-Mount Occupancy Sensor Lighting Controls
Multi-Technology Ceiling-Mount Occupancy Sensor U R (For use with Leviton Power Pack)*
Ø4.20 (106.7)
Advanced motion sensors combine infrared and ultrasonic technology for highly accurate monitoring without false triggering. All-digital self-adjusting technology provides “Install and Forget” solution for automatic
lighting control.
1.55
(39.4)
DESCRIPTION
CAT. NO.
COVERAGE
180°, 500 sq. ft
OPERATING
FREQUENCY
40kHz
Multi-Tech Ceiling-Mount
Occupancy Sensor
Multi-Tech Ceiling-Mount
Occupancy Sensor
Multi-Tech Ceiling-Mount
Occupancy Sensor
Protective Cage for Ceiling-Mount
Occupancy Sensors
OSC05-M0W
COLOR
White
OSC10-M0W
360°, 1000 sq. ft
40kHz
White
OSC20-M0W
360°, 2000 sq. ft
32kHz
White
ODCCG-000
—
—
White
*Low-voltage wiring is used to connect Leviton Occupancy Sensors to Cat. No. OSP20 Power Pack or a Centura CN100
Power Pack (purchased separately). See page D15 for information on OSP20.
OSC05-M0W
Major Motion, IR
TOP VIEW
20
11.5
Major Motion, Ultrasonic
8.5
Ø4.20 (106.7)
Energy Management Products
Minor Motion, Ultrasonic
0
8.5
11.5
1.55
(39.4)
20
SIDE VIEW
8
OSC20-M0W
0
0
3 5.6
9 11
15
20
17
23
OSC05-M0W Field of View (in feet)
TOP VIEW
TOP VIEW
20
20
16
11.5
11.5
8.5
0
0
8.5
11.5
11.5
16
20
20
SIDE VIEW
SIDE VIEW
8
8
0
23
20
17
15
11 9
5.6 3
0
3 5.6
9 11
OSC10-M0W Field of View
SPECIFICATIONS AND FEATURES
• Ideal for office areas with cubicles, general work space, classrooms, cafeterias
and public areas in commercial facilities
• Ultrasonic sensing for maximum sensitivity combined with Passive Infrared (PIR)
sensing to prevent false triggering from air conditioning and corridor activity
• Self-adjusting settings continuously analyze and adjust for optimum performance
• Ambient light override prevents lights from turning ON when there is ample
natural light
• Manual Delayed-OFF time settings of 30 seconds to 30 minutes
• Self-Adjusting Delayed-OFF time interval settings for 30 seconds to 30 minutes
— Compensates for real-time occupancy patterns, preventing unnecessary
ON/OFF switching
15
20
17
23
20
32
15
11 9 5.5 3
0
3 5.5 9 11
22.5
15
20
22.5
32
OSC20-M0W Field of View
• Non-volatile memory preserves all automatic and manual settings during
power outages
• Choice of coverage patterns to suit a variety of applications
• Small, unobtrusive size blends in with any décor
• Fast, simple installation using 4 color-coded low-voltage wires and a single
mounting post
• Compatible with Wiremold® surface raceways for mounting to hard ceilings
TESTING AND CODE COMPLIANCE
• CUL/US, FCC and NOM Certified
• California Title 24 compliant and meets ASHRAE Standard 90.1 requirements
• Backed by a Limited Five-Year Warranty
D
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
10
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
OCCUPANCY SENSOR LIGHTING CONTROLS • CEILING MOUNT
Commercial Grade Energy Management Products
Ceiling-Mount Occupancy Sensor Lighting Controls
Ultrasonic Ceiling-Mount Occupancy Sensor U R (For use with Leviton Power Pack)*
DESCRIPTION
CAT. NO.
COVERAGE
180°, 500 sq. ft
OPERATING
FREQUENCY
40kHz
Ultrasonic Ceiling-Mount
Occupancy Sensor
Ultrasonic Ceiling-Mount
Occupancy Sensor
Ultrasonic Ceiling-Mount
Occupancy Sensor
Protective Cage for Ceiling-Mount
Occupancy Sensors
OSC05-U0W
White
OSC10-U0W
360°, 1000 sq. ft
40kHz
White
OSC20-U0W
360°, 2000 sq. ft
32kHz
White
ODCCG-000
—
—
White
Ø4.20 (106.7)
Advanced Ultrasonic sensing technology for highly accurate monitoring with excellent immunity to air
currents and other interference. All-digital self-adjusting technology provides “Install and Forget” solution
for automatic lighting control.
COLOR
1.34
(34.0)
*Low-voltage wiring is used to connect Leviton Occupancy Sensors to Cat. No. OSP20 Power Pack or a Centura CN100
Power Pack (purchased separately). See page D15 for information on OSP20.
OSC05-U0W
Minor Motion, Ultrasonic
11.5
Major Motion, Ultrasonic
8.5
Energy Management Products
0
8.5
11.5
5
0
10
20
17
23
OSC05-U0W Field of View (in feet)
16
11.5
11.5
8.5
0
0
8.5
11.5
11.5
16
23
17
0
17
23
32
OSC10-U0W Field of View
SPECIFICATIONS AND FEATURES
• Ideal for restrooms, office areas with cubicles, general work space, warehouse and storage facilities,
cafeterias and public areas in commercial facilities
• Ultrasonic sensing for maximum range and
sensitivity combined with high immunity to false
triggering from air currents and other interference
• Self-adjusting settings continuously analyze and
adjust for optimum performance
• Ambient light override prevents lights from turning
ON when there is ample natural light
• Manual Delayed-OFF time settings of 30 seconds to
30 minutes
• Self-Adjusting Delayed-OFF time interval settings for
30 seconds to 30 minutes — Compensates for realtime occupancy patterns, preventing unnecessary
ON/OFF switching
0
22.5
22.5
32
OSC20-U0W Field of View
• Non-volatile memory preserves all automatic and
manual settings during power outages
• Choice of coverage patterns to suit a variety of
applications
• Small, unobtrusive size blends in with any décor
• Fast, simple installation using 4 color-coded lowvoltage wires and a single mounting post
TESTING AND CODE COMPLIANCE
• CUL/US Certified
• Meets ASHRAE Standard 90.1 requirements
• Backed by a Limited Five-Year Warranty
D
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
11
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
OCCUPANCY SENSOR LIGHTING CONTROLS • CEILING MOUNT
Commercial Grade Energy Management Products
Ceiling-Mount Occupancy Sensor Lighting Controls
Infrared Ceiling-Mount Occupancy Sensor U R (For use with Leviton Power Pack)*
Advanced Passive Infrared technology for highly accurate monitoring in a variety of commercial applications. All-digital self-adjusting technology provides “Install and Forget” solution for automatic lighting control.
Ø4.20 (106.7)
DESCRIPTION
Infrared Ceiling-Mount Occupancy Sensor
Infrared Ceiling-Mount Occupancy Sensor
with Ambient Light Override and
Secondary Relay
Protective Cage for Ceiling-Mount
Occupancy Sensors
1.55
(39.4)
CAT. NO.
OSC04-I0W
OSC15-I0W
COVERAGE
360°, 450 sq. ft
360°, 1500 sq. ft
COLOR
White
White
ODCCG-000
—
White
*Low-voltage wiring is used to connect Leviton Occupancy Sensors to Cat. No. OSP20 Power Pack or a Centura CN100
Power Pack (purchased separately). See page D15 for information on OSP20.
OSC04-I0W
Minor Motion, IR
TOP VIEW
12
Major Motion, IR
Energy Management Products
TOP VIEW
20
5
10
0
0
5
10
12
20
SIDE VIEW
8
SIDE VIEW
8
0
12
9
7
5
3
0
3
5
7
9
12
OSC04-I0W Field of View (in feet)
SPECIFICATIONS AND FEATURES
• Ideal for use in small offices, closets, open offices,
and other areas in commercial facilities with
unobstructed view of the sensor
• Self-adjusting settings continuously analyze and
adjust for optimum performance
• Ambient light override prevents lights from turning
ON when there is ample natural light
• Manual Delayed-OFF time settings of 30 seconds to
30 minutes
• Self-Adjusting Delayed-OFF time interval settings for
30 seconds to 30 minutes — Compensates for realtime occupancy patterns, preventing unnecessary
ON/OFF switching
20
15 11 9 5.6 3
0
3 5.6 9 11 15
20
OSC15-I0W Field of View
• Non-volatile memory preserves all automatic and
manual settings during power outages
• Small, unobtrusive size blends in with any décor
• Fast, simple installation using 4 color-coded
low-voltage wires and a single mounting post
TESTING AND CODE COMPLIANCE
• Meets ASHRAE Standard 90.1 requirements
• Backed by a Limited Five-Year Warranty
D
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
12
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
OCCUPANCY SENSOR LIGHTING CONTROLS • WALL MOUNT
Commercial Grade Energy Management Products
Wall-Mount Occupancy Sensor Lighting Controls
Multi-Technology Wall-Mount Occupancy Sensor U R
Ø4.23 (107.4)
4.67
(118.6)
(For use with Leviton Power Pack or Power Base Adaptor)*
Advanced motion sensors combine infrared and ultrasonic technology for highly accurate monitoring
without false triggering. All-digital self-adjusting technology provides “Install and Forget” solution for
automatic lighting control.
CAT. NO.
COVERAGE
Multi-Tech Wall-Mount
Occupancy Sensor
OSW12-M0W
115°, 1200 sq. ft
OPERATING
FREQUENCY
32kHz
COLOR
White
5.50 (139.7)
DESCRIPTION
*Low-voltage wiring is used to connect Leviton Occupancy Sensors to Cat. No. OSP20 Power Pack, OPB15 Power Base
Adaptor or a Centura CN100 Power Pack (purchased separately). See page D15 for information on OSP20 and page D8
for information on OPB15.
Note: Canopy and neck allow the Wall-Mount Occupancy Sensor to be installed on the ceiling as well.
(
)
OSW12-M0W
Wall Mount
TOP VIEW
58
31
16
11.5
5.50 (139.7)
11.5
16
31
58
SIDE VIEW
8
Minor Motion, IR
Major Motion, IR
OSW12-M0W
Ceiling Mount
Minor Motion, Ultrasonic
0
0 3 8 15
31
23 32
68
Major Motion, Ultrasonic
6.37 (161.8)
0
Energy Management Products
Ø4.23 (107.4)
OSW12-M0W Field of View (in feet)
SPECIFICATIONS AND FEATURES
• Ideal for conference rooms, stairwells, high-ceiling
rooms, open areas, storage rooms and classrooms.
Also ideal for corner mounting in a variety of
applications.
• Ultrasonic sensing for maximum sensitivity
combined with Passive Infrared (PIR) sensing
to prevent false triggering from air conditioning
and corridor activity
• Adjustable swivel neck rotates 85° vertically and
60° horizontally— Can be used for ceiling or wall
mounting
• Self-adjusting settings continuously analyze and
adjust for optimum performance
• Ambient light override prevents lights from turning
ON when there is ample natural light
• Manual Delayed-OFF time settings of 30 seconds to
30 minutes
• Self-Adjusting Delayed-OFF time interval settings for
30 seconds to 30 minutes — Compensates for realtime occupancy patterns, preventing unnecessary
ON/OFF switching
• Non-volatile memory preserves all automatic and
manual settings during power outages
• Fast, simple installation using 3 color-coded lowvoltage wires and a single mounting post
TESTING AND CODE COMPLIANCE
• Meets ASHRAE Standard 90.1 requirements
• Backed by a Limited Five-Year Warranty
• California Title 24 Compliant
D
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
13
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
OCCUPANCY SENSOR LIGHTING CONTROLS • WALL MOUNT
Commercial Grade Energy Management Products
4.67
(118.6)
Wall-Mount Occupancy Sensor Lighting Controls
5.50 (139.7)
Ø4.23 (107.4)
Infrared Wide View, High-Bay and Long-Range Wall-Mount Occupancy Sensor U
R
(For use with Leviton Power Pack or Power Base Adaptor)*
Advanced Passive Infrared technology for highly accurate monitoring in a variety of commercial applications.
All-digital self-adjusting technology provides “Install and Forget” solution for automatic lighting control.
DESCRIPTION
Infrared Wide-View Wall-Mount
Occupancy Sensor
Infrared High-Bay Wall-Mount
Occupancy Sensor
Infrared Long-Range Wall-Mount
Occupancy Sensor
CAT. NO.
OSWWV-I0W
COVERAGE
115°, 2500 sq. ft
COLOR
White
OSWHB-I0W
55 ft., 7 ft. wide
@ 30 ft. high
100 ft., 110º
@ 10 ft. high
White
OSWLR-I0W
White
*Low-voltage wiring is used to connect Leviton Occupancy Sensors to Cat. No. OSP20 Power Pack, OPB15 Power Base
Adaptor or a Centura CN100 Power Pack (purchased separately). See page D15 for information on OSP20 and page D8
for information on OPB15.
Note: Canopy and neck allow the Wall-Mount Occupancy Sensor to be installed on the ceiling as well.
Energy Management Products
OSWHB-I0W
TOP VIEW
Major Motion, IR
29
0
3.5
0
SPECIFICATIONS AND FEATURES
• OSWWV-I: Ideal for conference
rooms, stairwells, high-ceiling rooms,
large open areas, parking garages,
storage rooms and rooms with pendant fixtures. Also ideal for corner
mounting in a variety of applications.
• OSWHB-I and OSWLR-I: Ideal for
monitoring long, narrow spaces such
as warehouse aisles, hallways, stairways, any narrow room, closets and
storage areas. Also ideal for corner
mounting in a variety of applications.
• Self-adjusting settings continuously
analyze and adjust for optimum
performance
• Ambient light override prevents lights
from turning ON when there is ample
natural light
• Adjustable swivel neck rotates 85°
vertically and 60° horizontally—Can
be used for ceiling or wall mounting
• Manual Delayed-OFF time settings of
30 seconds to 30 minutes
• Self-Adjusting Delayed-OFF time interval settings for 30 seconds to 30 minutes — Compensates for real-time
occupancy patterns, preventing
unnecessary ON/OFF switching
• Non-volatile memory preserves all
automatic and manual settings during power outages
• Fast, simple installation using 3 colorcoded low-voltage wires and a single
mounting post
TESTING AND CODE COMPLIANCE
• Meets ASHRAE Standard 90.1
requirements
• Backed by a Limited Five-Year
Warranty
• California Title 24 Compliant
D
Minor Motion, IR
58
29
3.5
30
58
SIDE VIEW
8
0
0 3 8 15
31
68
0 3
OSWWV Field of View (in feet)
13
25
52
OSWHB Field of View
TOP VIEW
16.6
0
16.6
SIDE VIEW
10
0
0
14
42
71
100
OSWLR Field of View
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
14
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
OCCUPANCY SENSOR POWER PACKS
Commercial Grade Energy Management Products
Occupancy Sensor Power Packs
Power packs provide power for occupancy sensors as well as load switching circuitry. A Leviton Power Pack is
required with any low voltage occupancy sensor. Add-A-Relay units can be used to expand control capability.
DESCRIPTION
CAT. NO.
Power Pack
OSP20-0D0
Power Pack with
HVAC relay
OSP20-RD0
POWER
INPUT
120/220/
277VAC,
60Hz
120/220/
277VAC,
60Hz
OSP15-R30
347VAC,
60Hz
Add-A-Relay Unit
with HVAC relay
OSA20-R00
—
Low-Voltage Nipple
Adapter with 1/2"
Lock Nut for Power
Pack and
Add-A-Relay units
OSPNA-000
—
20A fluorescent/
incandescent @ 120V,
20A fluor. @ 277V;
1HP @120V,
2HP @ 240V
20A fluorescent/
incandescent @ 120V,
20A fluor. @ 277V;
1HP @ 120V, 2HP @ 240V;
HVAC: 0.5A @ 125VAC,
1A @ 30VDC
15A fluorescent @ 347V;
1HP @ 120V, 2HP @ 240V;
HVAC: 0.5A @ 125VAC,
1A @ 30VDC
15A incandescent @120V,
20A fluorescent @120V,
20A fluor. @ 277V,
15A fluor. @ 347V;
HVAC: 0.5A @ 125VAC,
1A @ 30VDC
—
CONTROL
INPUT
5mA,
24VDC
POWER SUPPLY
OUTPUT
150mA,
24VDC
5mA,
24VDC
150mA,
24VDC
3.66 (93.0)
OSP20-RD0
5mA,
24VDC
120mA,
24VDC
5mA,
24VDC
—
—
—
Power Pack Capacity Formula
Leviton power packs can be used to provide power to one or more occupancy sensors. Since current
consumptions of occupancy sensors may vary, the best way to ensure you order the correct number of
power packs and Add-A-Relays is by using this formula:
Number of
Model A sensors
X
Sensor A current
consumption rating
+
Number of
Model B sensors
X
Sensor B current
consumption rating…
+
Number of
Add-A-Relays
X
50mA
SENSOR
OSC04-I, OSC15-I, OSWHB-I, OSWLR-I, OSWWV-I
OSC05-M, OSC05-U, OSW12-M
OSC20-M, OSC20-U
OSC10-M, OSC10-U
OSA20-R00 Add-A-Relay
SPECIFICATIONS AND FEATURES
Power Pack
• For use with all OS Series occupancy sensors
• Power supply for OS Series occupancy sensors
• Switches incandescent, magnetic and electronic
fluorescent, magnetic and electronic low voltage,
and motor loads
• Compact size and light weight allows easy mounting through knockout in junction box (from either
inside or outside the box) with a simple twist-on nut
Add-A-Relay
• Expands power pack load capacity by functioning
as a supplementary relay
• Provides ability to switch loads in different voltage
systems
1.38
(35.1)
< 150mA per power pack
CURRENT CONSUMPTION
20mA
30mA
32mA
40mA
50mA
Energy Management Products
Power Pack with
HVAC relay
RELAY RATING
2.35 (56.7)
Power Packs and Accessories U R (For use with Leviton Occupancy Sensors on pages D10–D14)
• Compatible with electronic ballasts
• Same compact size and mounting features as
Power Pack
Nipple Adapter
• Simplifies the connection of occupancy sensor to
the low-voltage side of a power pack mounted
inside a fluorescent ballast cavity
1
• /2" conduit lock nut included
TESTING AND CODE COMPLIANCE
• cULus, FCC and NOM Certified
• Meets ASHRAE Standard 90.1 requirements
• Backed by a Limited Five-Year Warranty
D
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
15
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
OCCUPANCY SENSOR LIGHTING CONTROLS • OUTDOOR
Commercial and Residential Grade Energy Management Products
Outdoor Motion Sensors
Passive Infrared (PIR) outdoor motion sensors provide outstanding value in security lighting, convenience,
safety and energy savings for a wide range of commercial and residential applications.
5.36
(136.1)
2.43 (63.0)
4.50 (114.3)
9.16
(232.7)
PS200
COMMERCIAL GRADE
Professional Series Infrared Outdoor Occupancy Sensor U R
DESCRIPTION
Professional Series Outdoor
PIR Motion Sensor
Professional Series Outdoor
PIR Motion Sensor with
Dual Floodlights
Professional Series Outdoor
PIR Motion Sensor
Professional Series Outdoor
PIR Motion Sensor with
Dual Floodlights
CAT. NO.
PS200-10
RATING
Incandescent: 1000W @ 120V.
For 60Hz AC only
Incandescent: 1000W @ 120V.
For 60Hz AC only
PS200-1F
PS110-10
Incandescent: 1000W @ 120V.
For 60Hz AC only
Incandescent: 1000W @ 120V.
For 60Hz AC only
PS110-1F
COVERAGE
200°
COLOR
White
White
200°
110°
White
110°
White
RESIDENTIAL GRADE
Residential Series Infrared Outdoor Occupancy Sensor U R
Energy Management Products
DESCRIPTION
Residential Series Outdoor
PIR Motion Sensor
Residential Series Outdoor
PIR Motion Sensor with
Dual Floodlights
CAT. NO.
RS110-10
RATING
Incandescent: 500W @ 120V.
For 60Hz AC only
Incandescent: 500W @ 120V.
For 60Hz AC only.
RS110-1F
50
50
0
0
50
50
White
SIDE VIEW
SIDE VIEW
10
10
0
0
0
50
PS110/RS110 Field of View (in feet)
Professional Series
• Ideal for a wide range of commercial/industrial
settings including parking areas, storage facilities,
warehouses, loading docks, marina, garages,
walkways, campus grounds, meat lockers, walk-in
refrigerators/freezers and outbuildings
• Adjustable Delayed-OFF time settings from
20 seconds (for test mode) to 15 minutes
• Adjustable sensitivity and immunity to RFI signals
reduces false triggers
• Ambient light override prevents lights from turning
ON when there is ample natural light
• Provides Automatic, Test and Continuous Modes—
Test mode simulates automatic operation with short
delayed-OFF time for ease of making adjustments.
Continuous mode enables manual override for
110°
TOP VIEW
TOP VIEW
SPECIFICATIONS AND FEATURES
COVERAGE COLOR
110°
White
constant “lights ON” operation (when used with
standard ON/OFF switch)
• Surge suppression minimizes likelihood of damage
due to electrical surges
• Temperature compensation feature ensures uniform
performance in extreme hot or cold weather and
during temperature fluctuations
• Sensor neck adjustment allows accurate area monitoring: 110° vertical, 180° horizontal, 110° rotational
Residential Series
• Ideal for a wide range of residential settings including
backyards, garages, entranceways, porches, swimming pool areas, doorways and private docks
• Sensor neck adjustment allows accurate area monitoring: 110° vertical, 180° horizontal, 110° rotational
• Adjustable Delayed-OFF time settings from
20 seconds (for test mode) to 15 minutes
50
0
PS200 Field of View
• Adjustable sensitivity reduces false triggers
• Provides Automatic, Test and Continuous Modes—
Test mode simulates automatic operation with short
Delayed-OFF time for ease of making adjustments.
Continuous mode enables manual override for
constant “lights ON” operation (when used with
standard ON/OFF switch)
TESTING AND CODE COMPLIANCE
• UL Listed
• CSA Certified
MATERIAL CHARACTERISTICS
• Meets ASHRAE Standard 90.1 requirements
• Backed by a Limited Five-Year Warranty
D
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
16
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
FLUORESCENT ENERGY MANAGEMENT SYSTEMS
Commercial Grade Energy Management Products
Centura® Fluorescent Energy
Management System
Centura combines the technology of “daylight
harvesting” with a host of innovative energyefficient modular lighting controls, including
dimmers, timers, occupancy sensors and
photo-sensors that dim or turn off fluorescent
lighting when a space is not being used.
Centura incorporates the ability to interface
with Leviton occupancy sensors to provide
even greater energy savings. When single or
multiple occupancy sensors are installed,
programmed interior lighting is automatically
turned OFF when the room is vacant and
back ON to the programmed level when
occupancy is detected. The use of movement
sensors means energy savings up to a
proven 50%.
Leviton Occupancy Sensors Compatible with Centura System
CAT. NO.
OSC05-M0W
OSC10-M0W
OSC20-M0W
OSC05-U0W
OSC10-U0W
OSC20-U0W
OSC04-I0W
OSC15-I0W
OSW12-M0W
OSWWV-I0W
OSWLR-I0W
OSWHB-I0W
COVERAGE
180º, 500 sq. ft.
360º, 1000 sq. ft.
360º, 2000 sq. ft.
180º, 500 sq. ft.
360º, 1000 sq. ft.
360º, 2000 sq. ft.
360º, 450 sq. ft.
360°, 1500 sq. ft.
115º, 1200 sq. ft.
115º, 2500 sq. ft.
100 ft. @ 10 ft. high
55 ft., 7 ft. wide @ 30 ft. high
PAGE NO.
D10
D10
D10
D11
D11
D11
D12
D12
D13
D14
D14
D14
Note: The Leviton Occupancy Sensors listed can be powered by the Centura Dimming Power Pack—Use of a separate
Occupancy Sensor Power Pack is not required.
ODxxx
OCCUPANCY SENSOR
CN220
SWITCHING
CONTROLLER
CN221
DIMMING
CONTROLLER
Energy Management Products
DESCRIPTION
Multi-tech Ceiling Sensor
Multi-tech Ceiling Sensor
Multi-tech Ceiling Sensor
Ultrasonic Ceiling Sensor
Ultrasonic Ceiling Sensor
Ultrasonic Ceiling Sensor
PIR Ceiling Sensor
PIR Ceiling Sensor
Multi-tech Wall Sensor
PIR Wide-View Sensor
PIR Long Range Sensor
PIR High-Bay Sensor
Low-Voltage
Line Voltage
CN100 DIMMING POWER PACK
Red Bundle
Gray
POWER (+24V) - Green/White
DC GROUND - Green
CAN_H - Blue
CAN_L - Blue/White
PHOTOCELL - Orange
OCCUPANCY - Blue
Violet
Hot (Black)
Black
Line
120/277VAC
4
3
2
1
White
Neutral (White)
DIM - Violet
RETURN - Gray
Blue
HVAC NO - Brown/White
HVAC NC - Brown
HVAC COMM. - Green
Blue
Blue Bundle
HVAC
System
ON
MAX
BRIGHT
DIM
Green
Ground
OFF
Gray
Black
White
O-10V DC Ballast
ODC0P
PHOTOCELL
Violet
Alternate Ballast Connection
CN200
DIMMING
CONTROLLER
w/IR RECEIVER
NE100
SMARTJACK
System Wiring Diagram
For more information on Commercial Fluorescent Energy Management Systems, visit Leviton’s website at www.leviton.com
D
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
17
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
FLUORESCENT ENERGY MANAGEMENT SYSTEMS
Commercial Grade Energy Management Products
Centura® Fluorescent Energy Management System
4.30 (109.2)
Leviton’s Centura, a modular lighting control system for dimming fluorescent ballasts (Advance Mark 7™,
OSRAM Sylvania Quicktronic® Helios™ and Energy Savings SuperDim™), brings increased energy savings to
commercial spaces. Using a technique known as “daylight harvesting,” Centura factors in the available daylight
for the precise control of fluorescent light levels to achieve optimum comfort and energy efficiency.
Centura Fluorescent Energy Management System
3.62
(91.9)
4.00 (101.6)
2.69 (68.3)
3.28 (83.3)
4.71 (119.6)
1.76 (44.7)
1.10
(27.9)
3.28 (83.3)
2.66 (67.5)
CN200
4.11 (104.4)
Energy Management Products
CN100
DESCRIPTION
Centura Dimming Power Pack—ON/OFF and
DIM/BRIGHT control of 0-10VDC dimming
fluorescent ballasts. Responds to Wall Controller,
Occupancy Sensor and Photocell input and
provides +24 VDC power supply for these
devices. Programmed via Wall Controller
or via Leviton Personal Dimmer software
from a PC. Secondary relay sends control
signals to HVAC system. LEDs indicate
operation mode
Centura Dimming Controller with Infrared
Receiver—Decora-style 5-button unit for
ON/OFF, DIM/BRIGHT and MAX override.
Built-in IR receiver for use with Centura
NE200-00E Hand-Held Remote.
Programs energy management functions
Centura Hand-Held Remote Controller Infrared—
Remote provides convenient ON/OFF,
DIM/BRIGHT control presets and programming.
Designed for use with Centura CN200
Centura Switching Controller—
Decora-style rocker for ON/OFF switching
CAT. NO.
RATING
CN100-0D0 2400VA @ 120V AC 60Hz, 5500VA
@ 277V AC 60Hz. For use with
Advance Mark 7™ 0-10VDC,
OSRAM Sylvania Quicktronic®
Helios™, Energy Savings
SuperDim™ and comparable
ballasts only
COLOR
Gray
Metallic
CN200-00C No load rating, for use with
Centura Dimming Power Pack only
White
(Ivory
color
change
kit
included)
Black
NE200-00E
No load rating, for use with
Centura CN200 Controller only
CN220-00C No load rating
Centura Dimming Controller—Decora-style
CN221-00C No load rating, for use with
rocker for ON/OFF switching with built-in
Centura Dimming
arrow-shaped rocker for DIM/BRIGHT control.
Power Pack only
LED display indicates selected brightness
level. Programs energy management functions—
back of wallplate provides instruction label that
lines up with LEDs to facilitate programming
Centura Photocell—Detects available light
ODC0P
No load rating, for use with
levels for “Daylight Harvesting.” Allows Centura
Centura Dimming
system to maintain a programmed light level by
Power Pack only.
constantly adjusting fluorescent light output to
0–70 foot candles
compensate for changes in available daylight
Centura LCnet SmartJack—Includes a cable
NE100-00C No load rating, for use with
for connecting the SmartJack to a PC and a
Centura Power Pack
mini-CD containing server, administrator and
user software. For the latest software upgrades,
check Leviton’s website at leviton.com/centura
White
(Ivory
color
change
kit
included)
White
(Ivory
color
change
kit
included)
White
White
(Ivory
color
change
kits
included)
For more information on Commercial Fluorescent Energy Management Systems, visit Leviton’s website at www.leviton.com
1.75 (44.5)
1.32
(33.6)
2.51 (63.8)
CN221
0.99
(25.1)
SPECIFICATIONS AND FEATURES
• Ideal for commercial spaces and individual offices
• Reduces eyestrain and fatigue from glare, increasing
comfort and productivity
• All functions conveniently accessed through
Controllers or via Leviton Personal Dimmer software
from a PC
• Dimming Power Pack provides low-voltage power
supply for Controllers, Photocell and Occupancy
Sensors
• Photocell provides energy savings through Daylight
Harvesting technology
• Use with Leviton Occupancy Sensors for increased
energy savings: Lights turn ON automatically to
programmed levels when personnel enter area; OFF
automatically when area becomes vacant
• Modular system design expands energy saving
options with an interface for building emergency
systems, load shedding programs and time
clock systems
• Dimming Power Pack mounts in standard 4" square
back box. Dimming and Switching Controllers
mount in standard single-gang switch box
TESTING AND CODE COMPLIANCE
• Agency approvals for all Centura components are
UL, CSA, NOM, FCC, and California Title 24 (where
applicable) except for the hand-held remote
controller
• Meets ASHRAE Standard 90.1 requirements
• Backed by a Limited Two-Year Warranty (except
photocell: Backed by a Limited Five-Year Warranty)
ODC0P
D
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
18
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
DECORA® PLUS ELECTRONIC TIMER SWITCHES • 600–1000 WATTS
Commercial and Residential Grade Energy Management Products
Electronic Timer Switches 120V AC 60Hz U R
DESCRIPTION
Four Preset Buttons and OFF
3-Wire, Single-Pole (Neutral Required)
1000W Incandescent, 20A Inductive
1 HP @ 120V. Compatible with
electronic ballasts
CAT. NO.
6215M
6230M
6260M
6212H
INTERVAL
2-5-10-15 Minutes
5-10-15-30 Minutes
10-20-30-60 Minutes
2-4-8-12 Hours
COLOR*
I, W, A, T
I, W, A, T
I, W, A, T
I, W, A
2.38 (60.5)
RESIDENTIAL GRADE
Electronic Timer Switches 120V AC 60Hz U R
CAT. NO.
6515M
6560M
6512H
INTERVAL
2-5-10-15 Minutes
10-20-30-60 Minutes
2-4-8-12 Hours
SPECIFICATIONS AND FEATURES
*COLOR
• Electronic Timer Switch has four preset buttons
plus OFF for timed control of lights and appliances
• Electronic Timer Switch LEDs indicate time
elapsed and last LED flashes two minutes
until OFF warning
• All install easily in single gang wallbox in place
of standard switch
• Electronic keypad control
• Matching Decora wallplate included
Colors available as listed. For color selections, add
suffix to catalog numbers as follows: Ivory (-I), White
(-W), Almond (-A), Light Almond (-T).
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-68679)
• NOM Certified (#057)
• Meets ASHRAE Standard 90.1 requirements
• NOM Certified (#057)
• Backed by a Limited Two-Year Warranty
1.53
(38.9)
6215M-W
COLOR*
I, W, A
I, W, A
I, W, A
Energy Management Products
DESCRIPTION
Four Preset Buttons and OFF
2-Wire, Single-Pole, 120V
500W Incandescent Only
2.67 (67.8)
COMMERCIAL GRADE
3.28 (83.3)
Leviton Timers add contemporary styling to any commercial or residential application. Built to the highest
performance standards, Decora Electronic Timers provide long-lasting trouble-free service life.
Four Preset buttons plus an OFF button permit timed control of lights and appliances. Decora Plus Timers
are ideal for heat lamps, foyer and outdoor lights, hot tubs, spas, attic and exhaust fans. LEDs indicate
elapsed time and flash “Two Minutes Until OFF” warning.
4.13 (104.9)
Decora Plus Electronic Timer Switches
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
For more information regarding
matching wallplates, colors,
materials, single and multi-gang,
refer to Wallplates, section E.
D
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
19
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
DECORA® ELECTRONIC TIMER SWITCHES
Commercial and Residential Grade Energy Management Products
Decora Programmable Electronic Timer Switches
COMMERCIAL GRADE
2.67 (67.8)
3.28 (83.3)
4.13 (104.9)
24-Hour Programmable Electronic Timer Switch 120V AC 60Hz U R
DESCRIPTION
24-Hour LCD Programmable
Timer Switch–1200W Incandescent,
1200VA Inductive @ 120V AC 60Hz
Motor: 1 HP @ 120V AC 60Hz UL,
3⁄4 HP @ 120V AC 60Hz CSA
Neutral Connection Required
Compatible with electronic ballasts
CAT. NO.
6124H
INTERVAL
24-Hour ON/OFF scheduling
in 30 minute intervals
COLOR*
I, W, A, T
RESIDENTIAL GRADE
14-Hour Programmable Electronic Timer Switch 120V AC 60Hz U R
2.38 (60.5)
1.53
(38.9)
6124H-W
DESCRIPTION
14-Hour Segment Programmable
Timer Switch– 40W min, 500W max. @
120V AC 60Hz, Incandescent only
CAT. NO.
6651
INTERVAL
14-Hour ON/OFF scheduling
in hourly intervals
COLOR
I, W, A
2.73 (69.2)
3.28 (83.3)
4.13 (104.9)
Energy Management Products
Variable Countdown Timer Switch 120V AC 60Hz U R
1.73 (43.9)
DESCRIPTION
Decora Style Rotary-Dial
Variable Countdown Timer Switch –
600W Incandescent,
20A Inductive
Motor: 1 HP @ 120V AC 60Hz
Neutral Connection Required
CAT. NO.
6652
INTERVAL
1 minute to 18 hours
COLOR
I, W, A
1.43
(36.3)
6651-W
SPECIFICATIONS AND FEATURES
24-Hour Programmable Timer
• Ideal for a wide variety of commercial and residential
applications including outdoor lighting, pools, motors,
sprinklers, exhaust and attic fans, bathroom heat
lamps, hot tubs and spas, whole-house exhaust
fan scheduling, office lights, janitor closets,
landscape and security lighting
• Permits separate ON or OFF scheduling for halfhour periods of the day; ON/OFF manual control
available by using button below display panel
• Decora styling enhances any interior (NOTE:
6124H cannot be used with Decora Plus Screwless
Snap-On Wallplates)
14-Hour Programmable Timer
• Ideal for residential incandescent lighting control
including indoor, outdoor and seasonal lighting
• “Set-it-and-forget convenience” provides automatic
daily control with manual override
• Automates daily switching program (up to 14
hours) by responding to DIP switch ON or OFF
position for each hour; repeats until function switch
is moved to Manual or OFF mode
Countdown Timer Switch
• For residential and light commercial applications
including indoor and outdoor lighting, office lights
and ceiling paddle fans
• Simple rotary-dial time selection of settings from
1 minute to 18 hours: ON/OFF manual control
available
• An illuminated LED indicates load is ON. Blinking
LED accompanied by annunciator sound indicates
end of time cycle
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-66800)
• CSA Certified (File #LR-68679)
• Backed by a Limited Two-Year warranty
*COLOR
Colors available as listed. For color selections,
add suffix to catalog numbers as follows: Ivory (-I),
White (-W), and Almond (-A).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
D
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
20
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TIMED LIGHTING CONTROL PANELS
Commercial Grade Energy Management Products
Z-MAX Relay Overview
Lighting Control Relay Systems
The Leviton Z-MAX™ line of timed lighting controls and relays provides advanced scheduling of lighting and other loads in
applications where a time clock is typically used in conjunction with switching contactors. All Z-MAX models feature easyto-use menu-driven programming and configuration, a programmable time clock and output relays in a compact cabinet,
and several optional accessories for remote control. Z-MAX relay panels are ideal for cafeterias, auditoriums, offices, parking facilities, gymnasiums, pools, educational facilities, and landscape and security lighting. A number of wall stations, flush
trim kits and other accessories are available.
NEMA Type-1 enclosure
with removable door
Modular connectors for
wiring outside cabinet
Multi-voltage power
supply (120V-347V)
Revolutionary Z-Max
relay circuit provides
unmatched durability
Contractor-friendly
oversized lugs accept
#8-16 AWG wire
Keypad with LCD and
oversized buttons eases
programming
Energy Management Products
Keyed lock
• In four versions: 8-relay non-networked and 8-relay, 24-relay, 48-relay networked
• Single-circuit relay cards simplify maintenance and expansion
• Integrated astronomical time clock
• Individually replaceable relays rated for all light sources as well as motors
• Single-pole and two-pole relays fit in the same location
• Normal or emergency panel capability
• Compatible with occupancy sensors, photocells, digital and low-voltage wall stations and more
Available Color
Blue
D
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
21
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TIMED LIGHTING CONTROL PANELS
Commercial Grade Energy Management & Dimming Products
13 (330.2)
4.34
(110.6)
Z-MAXTM Relay Cabinets
Z-MAX Relay Cabinets provide complex scheduling of lighting and other loads in commercial
and residential applications where a time clock would typically be used in conjunction with
switching contactors. Z-MAX relay cabinets are ideal for cafeterias, auditoriums, offices, parking facilities, gymnasiums, pools, educational facilities, and landscape and security lighting.
Unique to Z-MAX is the standard relay card’s proprietary circuitry that eliminates arc shower
pitting at the contacts for extended relay life. The stand-alone cabinets presented here are
best suited to advanced scheduling of a single area (networked 8-relay cabinets are also
available). The Z-MAX line features a wide range of accessories, including digital and lowvoltage switch stations.
8-Relay Stand-Alone Z-MAX Cabinets U R
With 8 switch inputs and 20A output relays
13 (330.2)
Energy Management Products
R08BD
DESCRIPTION
Standard 8-Relay Cabinet (no relays)
8-Relay Cabinet with 4 Standard Relays
8-Relay Cabinet with 8 Standard Relays
8-Relay Cabinet with 4 2-Pole Relays
8-Relay Cabinet with 8 2-Pole Relays
8-Relay Cabinet with 4 347V Relays
8-Relay Cabinet with 8 347V Relays
CAT. NO.
R08BD-000
R08BD-104
R08BD-108
R08BD-204
R08BD-208
R08BD-C04
R08BD-C08
COLOR
Blue
Blue
Blue
Blue
Blue
Blue
Blue
For network versions replace B in middle of catalog number with N for network. 24-relay and 48-relay cabinets with
12 switch inputs (in master and slave versions) are also available.
For digital and low-voltage switch stations, see page D26.
Z-MAX Relay Cards U R
For incandescent, electronic fluorescent, magnetic fluorescent, electronic low voltage, neon cold cathode,
high intensity discharge and motor loads
DESCRIPTION
Standard 20A Single-Pole Relay Card*
2-Pole 20A Relay Card
347V Single-Pole 20A Relay Card
Normally Closed Relay Card
CAT. NO.
RELAY-STD
RELAY-2PL
RELAY-347
RELAY-NCL
INPUT POWER
120-277V
240/480V
120-347V
120-347V
*NOTE: Relay cabinets ship with RELAY-STD modules unless otherwise specified.
For the complete line of Z-MAX components, visit Leviton’s website at www.leviton.com.
SPECIFICATIONS AND FEATURES
D
INPUT POWER
120, 277, 347V
120, 277, 347V
120, 277, 347V
120, 277, 347V
120, 277, 347V
120, 277, 347V
120, 277, 347V
• Easy-to-program keypad control module with LCD
screen and straightforward menus—in plain English
(not code)
• Internal time clock with astronomical clock, daylight
savings time, and holiday scheduling features
• Generous wiring space and easy-to-wire terminals
• Switch inputs with override capability for each relay
• Hinged, removable door with keyed lock
• Works with analog controllers, low voltage switches,
discrete and analog photocells, and occupancy
sensors
• Accessories include: Z-MAX Switch Stations, telephone and modem interface modules, additional
switch input board, Ethernet module, photocell,
flush trim kits, voltage barriers, and PC-based
programming software
• Enclosure Dimensions: 13.00 (330.2) x 13.00
(330.2) x 4.34 (110.6)
TESTING AND CODE COMPLIANCE
• UL Listed (for individual load types) and CUL
Listed under both Industrial Control Equipment
and Energy Management Equipment
• California Title 24 compliant and meets ASHRAE
Standard 90.1 requirements
• NOM certified
• Limited Two-Year Warranty on cabinets
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
22
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TIMED LIGHTING CONTROL PANELS
Commercial Grade Energy Management & Dimming Products
Z-MAX Relay Product Listing
Z-MAX Relay Cabinets with Integrated Electrical Distribution
Z-MAX Relay Panels with an integrated electrical distribution system
offer the convenience of a single feed with the flexibility of our popular
Z-MAX relay system. Each includes all the award winning features of
the Z-MAX product line, integrated with a standard system of electrical
distribution and over current protection. These integrated systems
use commonly available Cutler Hammer breakers.
120V Systems Stock Configurations
CAT. NO.
VOLTS
PHASE
POWER FEED
RB423-L11
RB423-B11
RB421-L11
RB421-B11
RB243-L11
RB243-L11
RB241-L11
RB241-B11
120/208
120/208
120/240
120/240
120/208
120/208
120/240
120/240
3Ø
3Ø
1Ø
1Ø
3Ø
3Ø
1Ø
1Ø
Main Lug
225A Main Breaker
Main Lug
225A Main Breaker
Main Lug
225A Main Breaker
Main Lug
225A Main Breaker
NO. OF CIRCUIT BREAKERS
(20A SINGLE POLE)
42
42
42
42
24
24
24
24
NO. OF Z-MAX RELAY MODULES
(STANDARD SINGLE POLE)
42
42
42
42
24
24
24
24
NO. OF CIRCUIT BREAKERS
(20A SINGLE POLE)
42
42
24
24
NO. OF Z-MAX RELAY MODULES
(STANDARD SINGLE POLE)
42
42
24
24
277V Systems Stock Configurations
CAT. NO.
VOLTS
PHASE
POWER FEED
RB423-L21
RB423-B21
RB243-L21
RB243-B21
277/480
277/480
277/480
277/480
3Ø
3Ø
3Ø
3Ø
Main Lug
200A Main Breaker
Main Lug
200A Main Breaker
Energy Management Products
Z-MAX Relay Cabinets with
Integrated Electrical Distribution
Custom configurations are available upon request.
Contact your local Leviton LMS representative for additional information or visit www.leviton.com/LMS.
SPECIFICATIONS AND FEATURES
•
•
•
•
•
•
•
Single or Three Phase configurations
120V, 277V or 347V systems
Main lugs or main breaker
Custom load center configuration
Field replaceable standard breakers
All standard Z-MAX operational features
Uses Cutler-Hammer CH, GHQ and GBH frame
snap-in breakers, locked in place by the enclosure
• Ships as one complete pre-wired assembly
• Up to 100,000A AIC, short Circuit Current Rating,
available on all panelboards (Consult factory for
details)
• 277/480V panelboards, main lugs, 65k AIC @
120/208V, 14k AIC @ 277/480V standard
• 277/480V panelboard, main breaker, 35k AIC
standard
• 120/208V or 120/240V panelboards, main lugs,
10k AIC standard
• 120/208V or 120/240V panelboards, main breaker,
25k AIC standard depending on main breaker
• 347/600V panelboards, main lugs, 10k AIC
standard
• 347/600V panelboards, main breaker, 19k AIC
standard
TESTING AND CODE COMPLIANCE
• UL and cUL Listed
D
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
23
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TIMED LIGHTING CONTROL PANELS
Commercial Grade Energy Management & Dimming Products
Z-MAX Relay Product Listing
RRP—Remote 4-Relay Panel (Controlled by Z-MAX Master Cabinet)
The RRP (Remote Relay Panel) provides distributed switching of up to four 20 amp lighting
circuits, enabling multiple units to be networked and controlled from a Z-MAX Master Relay
Panel. With photocell, occupancy sensor and local switch inputs, the RRP is an ideal solution for
applications such as school classrooms where daylight harvesting, occupancy sensor control,
local switching and central control scheduling are desired. Revolutionary Z-MAX switching
circuit with 10,000,000 cycle life employed in the 120-277V standard relay model.
RRP—Remote 4-Relay Panel
DESCRIPTION
Remote Relay Panel with 4, Single Pole 20 Amp Relays
for use with Z-MAX. 120/277V
Remote Relay Panel with 4, Double Pole 20 Amp Relays
for use with Z-MAX. 120/277V
Remote Relay Panel with 4, Single Pole 20 Amp Relays
for use with Z-MAX. 347V
CAT. NO.
RE4SD-104
RATING
20A per relay
RE4SD-204
20A per relay
RE4SD-304
20A per relay
Energy Management Products
Dimensions: 10.0 (254.0) H x 10.0 (254.0) W x 4.0 (101.6) D
For more information on
Z-MAX Remote Relay Panels
and Accessories,
refer to Z-MAX data sheets.
RRP – Remote 4-Relay Panel
SPECIFICATIONS AND FEATURES
• Network ready for up to 96 total relays
• USB port for software updates and network
configuration
• 120/277V dual voltage standard
• 347V available
• Removable interior allows rough-in without risk of
damage to components
• Rated for 100% load capacity
• Handles in-rush currents in excess of 50 times load
current
• Low-voltage switch inputs support Leviton low
voltage switches and GE-style, ON/OFF switches
with optional LED output
ACCESSORIES
• Low-voltage switch adapter (reduces required wire
count of GE style switch by 1)
• 1–10 Button low voltage switches
• Indoor and outdoor 0-10V photocells
• Atrium and skylight 0-10V photocells
D
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
24
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TIMED LIGHTING CONTROL PANELS
Commercial Grade Energy Management & Dimming Products
EZ-MAX Relay Product Listing
EZ-MAX Relay Cabinets
EZ-MAX relay lighting control panels combine the power and performance
of the larger Z-MAX relay cabinets in a cost-effective four-circuit package
that’s housed in a compact 10" X 10" standard electrical enclosure. It is the
ideal contractor friendly, quick-to-install solution for smaller, stand-alone
applications that do not require the field configuration or advanced
networking features of the larger Z-MAX cabinets. It serves as a smart
replacement for time clock/contactor installations for any application
requiring reliable and cost-effective automatic lighting control.
EZ-MAX Relay Cabinet
DESCRIPTION
EZ-MAX with 4 120-277V relays
EZ-MAX with 4 208-480V 2-pole relays
EZ-MAX with 4 120-347V relays
CAT. NO.
RE4BD-104
RE4BD-204
RE4BD-C04
RATING
20A per relay
20A per relay
20A per relay
For more information on
EZ-MAX Relay Cabinets,
refer to EZ-MAX data sheets.
Dimensions: 10.0 (254.0) H x 10.0 (254.0) W x 4.0 (101.6) D
See pages D10-D15 for information on compatible Leviton Occupancy Sensors.
For digital and low-voltage switch stations, see page D26.
SPECIFICATIONS AND FEATURES
Relay Cabinets
• 120-277V standard relay model features revolutionary, patent-pending Z-MAX switching circuit with an
unprecedented 10,000,000 cycle life
• 347V available
• Low-voltage inputs allow connection of photocells,
occupancy sensors and low-voltage switches for a
comprehensive, easy-to-install energy management
solution
• Refer to pages D21-D22 for Z-MAX general features
Accessories
• Modem module for touch tone control or remote
configuration
Energy Management Products
EZ-MAX Relay Cabinets
• Low-voltage switch adapter (reduces required wire
count of GE style switch by 1)
• 1–4 Button low voltage switches
• Indoor and outdoor 0-10V photocells
• Atrium and skylight 0-10V photocells
TESTING AND CODE COMPLIANCE
• ASHRAE 90.1 compliant
• CEC Title 24 compliant
• Limited Ten-Year Warranty
D
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
25
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TIMED LIGHTING CONTROL PANELS
Commercial and Residential Grade Energy Management Products
Z-MAX Relay Product Listing
Z-MAX Digital and Low Voltage Switch Stations
The Z-MAX system can incorporate either digital or low-voltage stations. Although they look
identical, there are a few differences in how they operate. Both contain buttons that are
programmable to a variety of functions and custom labels are available.
Z-MAX Switch Stations
DESCRIPTION
Energy Management Products
ZMDSW-03W
On/Off switch
Zones 1 and 2
Zones 1 to 3
Zones 1 to 4
Zones 1 to 5
Zones 1 to 6
Zones 1 to 8
Zones 1 to 10
DIGITAL SWITCH
CAT. NO.*
ZMDSW-01W
ZMDSW-02W
ZMDSW-03W
ZMDSW-04W
ZMDSW-05W
ZMDSW-06W
ZMDSW-08W
ZMDSW-10W
LOW-VOLTAGE SWITCH
CAT. NO.**
LVS-01W
LVS-02W
LVS-03W
LVS-04W
LVS-05W
LVS-06W
LVS-08W
LVS-10W
COLOR
White
White
White
White
White
White
White
White
Note: Wallplate sold separately
*Support network and master Z-MAX versions only
**Support EZ-MAX and Z-MAX stand-alone and slave versions only
miniZ™ Low-Voltage Switch Stations
DESCRIPTION
5-Button dimming controller with On/Off, for use with miniZ only.
On/Off switch controller for use with miniZ, Z-MAX and EZ-MAX
CAT. NO.
LV200-00W
LV240-00W
COLOR
White
White
Dimensions: 4.71 (119.7) H x 1.76 (44.7) W x 1.26 (32.0) D for Switch Stations
LVS-08W
SPECIFICATIONS AND FEATURES
Common Features
• Available in 8 configurations
• Programmable functions include: on, off, and group
and scene select
• Compatible with standard and midway size Decora®
wallplates
• Custom labeling available; contact a factory
representative
Digital Station
• Wired via Luma-Net® to compatible products
including D4200, D8000, a-2000, i Series e, i Series
Quad, and Z-MAX Relay Cabinets
• Networks with up to 127 devices
• Compatible with handheld IR remote control
Low-Voltage Station
• Compatible with EZ-MAX and Z-MAX Relay
Cabinets, MDS cabinets, a-2000 cabinets
(with analog card), network protocol converter, and
other low-voltage devices
• Cat. No. LV240 for use with miniZ Intelligent
Daylight Management System, Z-MAX and EZ-MAX
• Cat. No. LV200 for use with miniZ Intelligent
Daylight Management System only
WARRANTY
• Limited Two-Year Warranty
D
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
26
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
TIMED LIGHTING CONTROL PANELS
Commercial Grade Energy Management & Dimming Products
miniZ™ Product Listing
miniZ™ Intelligent Daylight Management System
miniZ combines occupancy sensing, daylight harvesting and flexible lighting control functions
into a single, easily installed package. miniZ features several methods of ladderless commissioning, including the AutoCal™ feature, the world’s first 100% self-configuring daylight harvesting system. Installation requires little more than any other power-pack type product. The
performance features and capabilities of the miniZ product provide a package that surpasses
all others in the industry at a price anyone can afford.
6.65
(168.9)
miniZ™ Intelligent Daylight Management System
20A output relays (120/277V); 15A output relays (347V); Fluorescent, non-dimmed and 1-10V dimmed
(0,2 or 3 zones); 120mA/24V output for operation of occupancy sensors, etc.
CAT. NO.
0-10V DIMMING
CIRCUITS
0
2
3
2
3
0
2
3
2
3
CONTROL INPUT
VOLTAGE
120/277VAC
120/277VAC
120/277VAC
120/277VAC
120/277VAC
220/347VAC
220/347VAC
220/347VAC
220/347VAC
220/347VAC
NETWORK
FUNCTIONALITY
No
No
No
Yes
Yes
No
No
No
Yes
Yes
6.65
(168.9)
miniZ/ Dual Room miniZ
*Consult with factory for availability.
Dual Room miniZ™ Intelligent Daylight Management System
The dual room miniZ offers the same performance features as the miniZ, but instead of working in one
room using one photocell to control three zones, it provides dual room/ one zone per room daylight harvesting control using a separate photocell and occupancy sensor for each room.
CAT. NO.
MZB02-102
20A POWER
CIRCUITS
2
0-10V DIMMING
CIRCUITS
0
CONTROL INPUT
VOLTAGE
120/277VAC
NETWORK
FUNCTIONALITY
No
MZD22-102
2
2
120/277VAC
No
MZN22-102*
2
2
120/277VAC
Yes
MZB02-C02
2
0
220/347VAC
No
MZD22-C02
2
2
220/347VAC
No
MZN22-C02*
2
2
220/347VAC
Yes
*Consult with factory for availability.
SPECIFICATIONS AND FEATURES
• Automatic Correction setting for Light Loss Factor
(LLF) recognizes and corrects for lumen maintenance issues
• Cost-effective energy code compliance
• Ladderless Commissioning™ provides install-andforget convenience
• Automatic closed-loop, multi-zone daylight control
• Convenient occupancy sensor and photocell
integration
• Simplified daylight harvesting with 3% to 100%
dimming capabilities (0-10V fluorescent dimming
ballasts required)
• Autocal™ (patent pending) automatic photocell
calibration
• Accepts external time clock inputs
• Simplified integration with emergency and building
automation systems
• Automatic Daylight Harvest Mode provides
optimum lighting output for additional energy
savings potential
• Daylight switching full range 0-10V dimming and
network models available
• Cost effective energy code compliance
• Accepts external time clock inputs
• Closed loop or open loop daylight control
• Isolated contacts for HVAC relay
• miniZ works in one room using one photocell and
occupancy sensor to control three zones
• Dual Room miniZ controls one zone per room
using a separate photocell and occupancy sensor
for each room
2.1
(53.3)
Energy Management Products
MZB00-102
MZD20-102
MZD30-101
MZN20-102*
MZN30-101*
MZB00-C02
MZD20-C02
MZD30-C01
MZN20-C02*
MZN30-C01*
20A POWER
CIRCUITS
2
2
1
2
1
2
2
1
2
1
NETWORK FEATURES
•
•
•
•
•
Luma-CAN® Network support
Network digital switch support
Z-MAX master/slave network participation
Remote shared network inputs
Scalable system expansion
TESTING AND CODE COMPLIANCE
• UL and cUL Listed
• CEC Title-24 Listed
• Limited Two-Year Warranty
D
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005
27
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
HOW TO USE THIS CATALOG
The L-101 Leviton Wiring Device Catalog is designed to help you find the device you’re seeking in the quickest and easiest way
possible. Most product sections are divided into three distinct categories in the following sequence—Industrial Grade, Commercial
Grade and Residential Grade—and grouped according to amperage and voltage, lowest to highest. For example, if you need to
order 15 Amp, 125 Volt Industrial Grade straight-blade duplex receptacles, begin your search with the main Table of Contents at the
front of the book. Here you’ll see that all straight blade receptacles are listed in Section G. Turn to Section G for a more detailed Table
of Contents on the first page. Each section page contains product descriptions, ratings and catalog numbers. There are also helpful
highlights including Specifications and Features, Testing and Code Compliance, Color listing, Material Characteristics and dimensioned color product photos. Any product page in the L-101 Catalog can be clearly copied or faxed to customers and prospects for
use as a specifier sheet or as part of a presentation.
The Quick Reference Guide follows the main Table of Contents to help you pinpoint and locate specific products. Technical
Section V provides general product and test data, industry standards, NEMA configuration charts, a glossary of wiring device
terms, ANSI architectural symbols and other related information. Specific catalog numbers are listed in the exhaustive index at
the back of the catalog.
A
B
D
C
G
E
F
H
I
K
L
J
A RATING
E CATALOG NUMBER
I SPECIFICATIONS & FEATURES
B Choose GRADE, if appropriate
F DESCRIPTION
J TESTING AND CODE COMPLIANCE
C DIMENSIONED PHOTOGRAPH
G Check for NEMA CONFIGURATION
K COLOR LISTING
D WIRING/CERTIFICATIONS
H WALLPLATE REFERENCE, if appropriate
L MATERIAL CHARACTERISTICS
D
28
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement