Rocktron VII Deadly Sins Auto Wah Boutique Series Owner Manual

Add to my manuals
12 Pages

advertisement

Rocktron VII Deadly Sins Auto Wah Boutique Series Owner Manual | Manualzz

VII Deadly Sins

Instruction Manual

This pedal is:

May be covered by one or more of the following: U.S. Patents #4538297, 4647876, 4696044, 4745309, 4881047,

4893099, 5124657, 5263091, 5268527, 5319713, 5333201, 5402498 and 5493617.

Other patents pending. Foreign patents pending.

Compliance

Your VII Deadly Sins ™ pedal has been tested and complies with the following

Standards and Directives as set forth by the European Union:

Council Directive(s):

Compatibility

Standard(s):

89/336/EEC

EN55013, EN50082-1

Electromagnetic

This means that this product has been designed to meet stringent guidelines on how much RF energy it can emit, and that it should be immune from other sources of interference when properly used. Improper use of this equipment could result in increased RF emissions, which may or may not interfere with other electronic products.

To insure against this possibility, always use good shielded cables for all audio input and output connections. This will help insure compliance with the Directive(s).

For more information about other Rocktron products, please see your local dealer or one of our importers closest to you (listed on the Rocktron website - www.

rocktron.com).

Read all instructions contained in this manual.

Keep these instructions

Heed all warnings

Follow all instructions.

Do not use this apparatus near water.

Clean with dry cloth

Copyright © 2009 GHS Corporation

All Rights Reserved.

Precautions

Refer all service to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply or plug is damaged, liquid has been spilled or objects have fallen into the apparatus or if the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.

DO NOT ATTEMPT TO SERVICE THIS EQUIPMENT. QUALIFIED PERSONNEL

SHOULD SERVICE THIS EQUIPMENT ONLY. DO NOT MAKE ANY INTERNAL

ADJUSTMENTS OR ADDITIONS TO THIS EQUIPMENT AT ANY TIME OR TAMPER

WITH INTERNAL ELECTRONIC COMPONENTS AT ANY TIME. FAILURE TO FOL-

LOW THESE INSTRUCTIONS MAY VOID THE WARRANTY OF THIS EQUIPMENT

AS WELL AS CAUSING A SHOCK HAZARD.

OPERATING TEMPERATURE

Do not expose this unit to excessive heat. This unit is designed to operate between 32 F and

104 F (0 C and 40 C). This unit may not function properly under extreme temperatures.

Do not block any ventilation openings (if applicable). Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.

This product is not equipped with a plug or cable. This pedal runs on a 9 Volt Battery, if a

9Volt DC adapter is the used please follow adapter manufacturer’s operation instructions.

Only used attachments/accessories specified by the manufacturer.

Do not use this product with any case, stand tripod, bracket or table that is not specified by the manufacturer. Insure that the case, stand, tripod, bracket etc. is properly adjusted and setup (follow all instructions). Extra care and caution should be taken to avoid tip over and injury.

Unplug this apparatus during lightening storms or when unused during long periods of time.

Introduction

If you have never experienced the wonders of an Auto

Wah pedal, jump on board now with Rocktron’s VII

Deadly Sins! Seven deadly sins will be washed away with this intriguing effect that will offer up bliss filled wah sounds with incredibly easy control.

Part of the Rocktron Boutique Series of stomp boxes this pedal design comes in a rugged metal chassis with eye popping retro custom design laser etched artwork.

This is a TRUE BYPASS pedal: when you turn it off…it is out of your signal path!

Control knobs for the VII Deadly Sins Auto Wah include MODE which controls the A.D.S.R. (Attack,

Decay, Sustain, Release) response curve applied to the wah filter. Q SHAPE determines how wide you set the wah filter sweep. DEADLY SIN provides Trigger

Threshold Detection for wah actuation.

With the VII Deadly Sins, you shape the wah you desire, you set the wah sweep you want, you determine the attack, decay, sustain and release responses you need. One click of the footswitch sends you to wah heaven with an auto wah that uses

Introduction

a minimum of real estate on your pedalboard, yet provides years of solid performance in a rugged chassis.

The VII Deadly Sins is sure to inspire your next composition and your stage performances. Wah effects are at the heart of so many great songs and solos, and Rocktron’s stomp box will be no exception.

The footswitch on the VII Deadly Sins Auto Wah controls On/Off status (indicated by the LED). This stomp box runs on a 9V Alkaline battery. You may also use the Rocktron DC OnTap Universal Power

Adaptor.

Descriptions

1 2 3 4

8

5

6

7

Descriptions continued.........

1 MODE Control - This control allows you to select DOWN, MIDDLE or UP of the response curve applied to the wah filter.

2 Q-SHAPE Control -The control determines the width of the wah filter boost.

3

4

5

6

9VDC Input - This input jack provides 9VDC power to the pedal from the Rocktron DC

OnTap 9V power supply (sold seperately).

DEADLY SIN Control - This control determines the threshold point at which the wah will activate.

ON/OFF Led - This LED shows if the pedal is on or off. When the LED is light the pedal is on. When the LED is not light the pedal is off.

FOOTSWITCH - Use this switch to turn on or off the pedal. The On/Off Led will show you if the pedal is on or off.

Descriptions continued.........

7 INPUT Jack - Using a standard 1/4” guitar cable, plug your guitar into this jack.

8 OUTPUT Jack - Using a standard 1/4” guitar cable you can plug in another pedal from this jack or plug directly into your amplifier.

Typical Connection

Specifications

Maximum Input

Maximum Output

Imput Impedance

Output Impedance

Current Consumption

Power Requirements

3dBu

8dBu

1MΩ

10k

15mA

9V Alkaline Battery or

Rocktron DC OnTap

Univeral Power Supply

(sold seperately). Negative tip.

Dimensions

Weight

95mm x 122mm x 56mm

3.75” x 4.75” x 2.25”

410g

14.46 oz

How to change the battery:

To change the battery, turn the pedal over and remove the 4 screws on the bottom. Remove the back cover. Carefully remove the old battery and replace it with a new 9V Alkaline battery. Replace battery in the same area as the old battery was located. Place the back cover on the pedal and reinsert the screws.

Save yourself tons of money in batteries by using the Rocktron DC OnTap Universal Power Supply to power this pedal (sold seperately). The Rocktron DC OnTap provides a constant flow of power to the pedal, unlike a battery that will degrade over time. The Rocktron DC OnTap Univeral Power

Supply can also power up to 20 pedals and can be used with both 110V and 220V power sources.

Check, www.rocktron.com for more information on the DC OnTap and where to purchase.

Rocktron - A Division of GHS Corporation

2813 Wilber Ave

Battle Creek MI 49037

USA www.rocktron.com

[email protected]

tel: 1-269-968-3351 rev. 7-27-09

2009.1

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement