Iiyama ProLite T2250MTS-1 User Guide Manual Pdf

Iiyama ProLite T2250MTS-1 User Guide Manual Pdf
USER MANUAL
ENGLISH
DEUTSCH
FRANCAIS
NEDERLANDS
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the monitor.
Please keep this manual in a safe place for
your future reference.
Downloaded from ManualMonitor.com Manuals
POLSKI
ENGLISH
Downloaded from ManualMonitor.com Manuals
TABLE OF CONTENTS
FOR YOUR SAFETY.............................................................................................. 1
SAFETY PRECAUTIONS ................................................................................ 1
SPECIAL NOTES ON LCD MONITORS.......................................................... 3
CUSTOMER SERVICE .................................................................................... 3
CLEANING....................................................................................................... 3
FEATURES ...................................................................................................... 4
CHECKING THE CONTENTS OF THE PACKAGE ......................................... 4
FITTING AND REMOVAL OF BASE ................................................................ 4
CONTROLS AND CONNECTORS .................................................................. 5
CONNECTING YOUR MONITOR.................................................................... 6
COMPUTER SETTING .................................................................................... 7
ADJUSTING THE VIEWING ANGLE .............................................................. 7
OPERATING THE MONITOR................................................................................. 8
ADJUSTMENT MENU CONTENTS ................................................................ 9
SCREEN ADJUSTMENTS............................................................................... 15
POWER MANAGEMENT FEATURE ............................................................... 18
TROUBLE SHOOTING .......................................................................................... 19
RECYCLING INFORMATION................................................................................. 20
APPENDIX ............................................................................................................ 21
SPECIFICATIONS .......................................................................................... 21
DIMENSIONS .................................................................................................. 22
COMPLIANT TIMING....................................................................................... 22
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 2004/108/EC “EMC
Directive” , 2006/95/EC “Low Voltage Directive” and 2005/32/EC “EuP Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas, business and light industrial premises and small-scale enterprises, inside as
well as outside of the buildings. All places of operation are characterised by their connection to
the public low voltage power supply system.
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the address:
http://www.iiyama.com
You can access the Web page of different countries from there.
We reserve the right to change specifications without notice.
All trademarks used in this user manual are the property of their respective owners.
Downloaded from ManualMonitor.com Manuals
ENGLISH
BEFORE YOU OPERATE THE MONITOR ............................................................ 4
FOR YOUR SAFETY
SAFETY PRECAUTIONS
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor
ENGLISH
and contact your dealer or iiyama service center immediately. Further use may be dangerous and can
cause fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire
or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any
object inside may cause fire, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will
cause malfunction and may cause fire or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause fire or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it may
cause electric shock.
1
FOR YOUR SAFETY
Downloaded from ManualMonitor.com Manuals
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky
areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun
shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fire.
To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet
will be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage.
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also
cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable
is disconnected. If you do not disconnect them, it may cause fire or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid
accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself
as this may cause fire or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage
your computer.
DO NOT PUT FLOPPY DISKS NEAR THE SPEAKERS
Magnetically recorded data, such as on a floppy disk, may become corrupted by the magnetic field
produced by the speakers if the disks are placed on or near the speakers.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is
recommended as looking at the screen continuously can cause eye strain.
FOR YOUR SAFETY
Downloaded from ManualMonitor.com Manuals
2
ENGLISH
place any heavy objects on the monitor, and that all cables are routed such that children may not pull
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE
When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture position
to the correct position.
Due to the nature of the backlight, the screen may flicker during initial use. Turn off
the Power Switch and then turn it on again to make sure the flicker disappears.
You may find slightly uneven brightness on the screen depending on the desktop
ENGLISH
pattern you use.
Due to the nature of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for hours. In this
case, the screen is recovered slowly by changing the image or turning off the Power
Switch for hours.
Contact your dealer or iiyama service center for the backlight replacement when the
screen is dark, flickering or not lighting up. Never attempt to replace it by yourself.
CUSTOMER SERVICE
NOTE
The fluorescent light used in the LCD monitor may have to be periodically replaced.
For the warranty coverage on this component, please check with local iiyama service
center.
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
CLEANING
WARNING
If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION
For safety reasons, turn off the power switch and unplug the monitor before you clean
it.
NOTE
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and the
LCD screen.
Thinner
Spray-type cleaner
Benzine
Wax
Abrasive cleaner
Acid or Alkaline solvent
Touching the cabinet with any product made from rubber or plastic for a long time may
cause degeneration or loss of paint on the cabinet.
CABINET
Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then
wipe the cabinet with a soft dry cloth.
LCD
Periodic cleaning with a soft dry cloth is recommended.
SCREEN
Don't use tissue paper etc. because these will damage the LCD screen.
3
FOR YOUR SAFETY
Downloaded from ManualMonitor.com Manuals
BEFORE YOU OPERATE THE MONITOR
FEATURES
Supports Resolutions up to 1920 × 1080
High Contrast 1000:1 (Typical), Brightness 270cd/m2 (Typical), Quick Response
Time 5ms (Typical)
Digital Character Smoothing
ENGLISH
Automatic Set-up
Stereo Speakers
2 × 1W Stereo Speakers
Plug & Play VESA DDC2B Compliant
Windows® 95/98/2000/Me/XP/Vista/7 Compliant
Power Management (VESA DPMS Compliant)
VESA Mounting Standard (100mm×100mm) Compliant
Keyhole for Security Lock
CHEKING THE CONTENTS OF THE PACKAGE
The following accessories are included in your package. Check to see if they are enclosed with the monitor.
If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office.
Power Cable*
D-Sub Signal Cable
DVI-D Cable
USB Cable
Audio Cable
Stand-Base
Quick Start Guide
CAUTION
* The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
BEFORE YOU OPERATE THE MONITOR
Downloaded from ManualMonitor.com Manuals
4
FITTING AND REMOVAL OF BASE
The monitor is supplied complete with a stand. If you prefer to wall mount the monitor, please follow
the instructions below to remove the stand. Be sure to include the stand with the monitor if it is
necessary to return the unit.
CAUTION
Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
ENGLISH
Unplug the monitor before removal or installation to avoid electric shock or damage.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
the monitor flat on a table with front face down.
Hold the monitor and push the Stand-Base.
Use 'thumb screw' provided to secure base to monitor column.
Thumb screw for Stand-Base fixing
Stand-Base
<Remove>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
the monitor flat on a table with front face down.
Remove 'thumb screw' to remove base from monitor column.
5
BEFORE YOU OPERATE THE MONITOR
Downloaded from ManualMonitor.com Manuals
ENGLISH
CONTROLS AND CONNECTORS
<Front>
Power Switch (
<Back>
)
Power Indicator
NOTE Blue:
Normal operation
Orange: Power Management
The monitor enters into power management mode which reduces the power
consumption to less than 1W when receiving no horizontal and/or vertical
sync signal.
Auto Button (AUTO)
Scroll Up / Brightness / Contrast Button* ( > )
Scroll Down / Volume Button* ( < )
Menu / Select Button (MENU)
Speakers
USB Conector (USB)
Audio Connector (AUDIO)
D-SUB mini 15pin Connector (VGA)
DVI-D 24pin Connector (DVI)
AC Connector (AC IN)
Keyhole for Security Lock
NOTE You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
* You can skip the Menu items and display an adjustment scale directly.
BEFORE YOU OPERATE THE MONITOR
Downloaded from ManualMonitor.com Manuals
6
CONNECTING YOUR MONITOR
Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
Connect the Power Cable to the monitor first and then to the power supply.
Power of the monitor and the computer is turned on.
ENGLISH
NOTE
The signal cables used for connecting the computer and monitor may vary with the type of
computer used. An incorrect connection may cause serious damage to both the monitor and
the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector. If
a special cable is required please contact your local iiyama dealer or regional iiyama office.
For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama
office for a suitable adaptor.
Make sure you tighten the finger screws at each end of the signal cable.
[Example of Connection]
<Back>
Power Cable
(Accessory)
USB Cable (Accessory)
Audio Cable (Accessory)
D-Sub Signal Cable (Accessory)
DVI-D Cable (Accessory)
7
BEFORE YOU OPERATE THE MONITOR
Downloaded from ManualMonitor.com Manuals
Computer
COMPUTER SETTING
Signal Timing
Change to the desired signal timing listed on page 22: COMPLIANT TIMING.
Windows 95/98/2000/Me/XP/Vista/7 Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on
Windows 95/98/2000/Me/XP/Vista/7 by connecting the monitor to DDC2B compliant computer with
the Signal Cable supplied.
For installation on Windows 95/98/2000/Me/XP: The monitor Information File for iiyama monitors
ENGLISH
may be necessary for your computer and obtained via the Internet, using the address:
http://www.iiyama.com
NOTE
For additional information on how to download the driver for your touch screen monitor,
please access the internet site noted above.
Monitor Drivers are not required in most cases for Macintosh or Unix operating systems.
For further information, please contact your computer dealer first for advice.
ADJUSTING THE VIEWING ANGLE
For optimal viewing it is recommended to look at the full
face of the monitor.
Hold the stand so that the monitor does not topple when
you change the monitor’s angle.
You are able to adjust the monitor ’s angle up to 20
degrees upward, 3 degrees downward.
In order to ensure a healthy and relaxed body position
when using the monitor at visual display workstations, it
is recommended that the adjusted tilt angle should not
exceed 10 degrees. Adjust the monitor’s angle to your
20
own preference.
NOTE
Do not touch the LCD screen when you change
the angle. It may cause damage or break the
LCD screen.
Careful attention is required not to catch your
fingers or hands when you change the angle.
BEFORE YOU OPERATE THE MONITOR
Downloaded from ManualMonitor.com Manuals
8
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 22. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 15 for SCREEN ADJUSTMENTS.
Press the MENU Button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the < / > Buttons.
BRIGHTNESS/CONTRAST
BRIGHTNESS
ENGLISH
CONTRAST
< > ADJUST
MENU : ENTER
AUTO : EXIT
B Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the MENU Button. Then, use the < / > Buttons to highlight
the desired adjustment icon.
C Press the MENU Button again. Use the < / > Buttons to make the appropriate
adjustment or setting.
D Press the AUTO Button to leave the menu, and the settings you just made would
be automatically saved.
For example, to correct for vertical position, select Menu item of IMAGE CONTROL and then press
the MENU Button. Then, select V.POSITION by using the < / > Buttons.
IMAGE CONTROL
AUTO ADJUSTMENT
H.POSITION
V.POSITION
CLOCK
PHASE
SHARPNESS
< > ADJUST
MENU : ENTER
AUTO : EXIT
An adjustment page appears after you press the MENU Button. Then, use the < / > Buttons to
change the vertical position settings. The vertical position of the overall display should be changing
accordingly while you are doing this.
Press the AUTO Button lastly, it ends, any changes are saved in the memory.
IMAGE CONTROL
V.POSITION
50
NOTE
< > ADJUST
MENU : ENTER
AUTO : EXIT
When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the OSD TIMEOUT has passed. Also, the AUTO button can be used to return previous
menu and turn off the On-Screen Display.
Any changes are automatically saved in the memory when the On Screen Display disappears.
Turning off the power should be avoided while using the Menu.
Adjustments for H. / V. POSITION, CLOCK and PHASE are saved for each signal timing. Except for
these adjustments, all other adjustments have only one setting which applies to all signal timings.
9
OPERATING THE MONITOR
Downloaded from ManualMonitor.com Manuals
ADJUSTMENT MENU CONTENTS
BRIGHTNESS/CONTRAST
BRIGHTNESS/CONTRAST
Direct
BRIGHTNESS
CONTRAST
Adjustment Item
BRIGHTNESS *
CONTRAST
*
MENU : ENTER
AUTO : EXIT
Problem / Option
ENGLISH
< > ADJUST
Button to Press
Too dark
Too bright
Too dull
Too intense
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
Direct
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
BRIGHTNESS/CONTRAST: Press the > Button when the Menu is not displayed.
OPERATING THE MONITOR
Downloaded from ManualMonitor.com Manuals
10
IMAGE CONTROL
IMAGE CONTROL
Only Analog Input
AUTO ADJUSTMENT
H.POSITION
V.POSITION
CLOCK
PHASE
SHARPNESS
< > ADJUST
Adjustment Item
ENGLISH
AUTO
ADJUSTMENT *1
Direct
Button to Press
Adjust H. / V. POSITION, CLOCK and PHASE automatically.
Too left
Too right
Too low
V. POSITION
Too high
Too narrow
CLOCK*2
SHARPNESS
AUTO : EXIT
Problem / Option
H. POSITION
PHASE*2
MENU : ENTER
Too wide
To correct flickering text or lines
Adjust the picture quality at resolutions of less 1920 x
1080. You can change the picture quality.
*1 For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 15 for
SCREEN ADJUSTMENTS.
*
2
See page 15 for SCREEN ADJUSTMENTS.
Direct
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
AUTO ADJUSTMENT: Press the AUTO Button when the Menu is not displayed.
11
OPERATING THE MONITOR
Downloaded from ManualMonitor.com Manuals
COLOR
COLOR
9300K
6500K
CUSTOM COLOR
SRGB
< > ADJUST
Problem / Option
9300K
Bluish white
6500K
Greenish white
RED
CUSTOM COLOR
AUTO : EXIT
GREEN
BLUE
Button to Press
ENGLISH
Adjustment Item
MENU : ENTER
Too weak
Too strong
sRGB
SRGB
NOTE
sRGB is an international standard which defines and unifies the difference of color
appearance between equipment.
You can not adjust the BRIGHTNESS and CONTRAST during sRGB mode because
those settings are locked.
OSD CONTROL
OSD CONTROL
H. OSD POSITION
V. OSD POSITION
OSD TIMEOUT
< > ADJUST
Adjustment Item
H.OSD POSITION
V.OSD POSITION
OSD TIMEOUT
MENU : ENTER
AUTO : EXIT
Problem / Option
Button to Press
OSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time
between 10 and 100 seconds.
OPERATING THE MONITOR
Downloaded from ManualMonitor.com Manuals
12
OTHER
OTHER
LANGUAGE
INPUT
SPEAKER VOLUME
INFORMATION
SN: xxxxxxxxxxxxxxxx
31. 5KHZ / 60. 1HZ
640X 480
< > ADJUST
ENGLISH
Adjustment Item
MENU : ENTER
Problem / Option
ENGLISH
DEUTSCH
FRANÇAIS
JAPANESE
LANGUAGE
INPUT
AUTO : EXIT
English
German
French
Japanese
Button to Press
ITALIANO
ANALOG
POLSKI
NEDERLANDS
PYCCKO
Select the D-SUB input.
DIGITAL
Select the DVI-D input.
Italian
Polish
Dutch
Russian
AUTO DETECT Select the signal input automatically.
SPEAKER VOLUME
Direct
INFORMATION
Too soft
Too loud
ON
Displays information regarding the current input
signal coming from the graphic card in your
computer.
OFF
No Information Displayed.
Direct
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
SPEAKER VOLUME: Press the < Button when the Menu is not displayed.
MUTE: [ON]
Press the MENU Button when the SPEAKER VOLUME Menu is displayed.
[OFF] Press the < or > Button when the SPEAKER VOLUME Menu is displayed.
13
OPERATING THE MONITOR
Downloaded from ManualMonitor.com Manuals
RESET
RESET
YES
NO
Adjustment Item
MENU : ENTER
AUTO : EXIT
Problem / Option
YES
Factory-preset data is restored.
NO
Return to Menu.
EXIT
Button to Press
ENGLISH
< > ADJUST
EXIT
< > ADJUST
MENU : ENTER
AUTO : EXIT
Exit OSD.
OPERATING THE MONITOR
Downloaded from ManualMonitor.com Manuals
14
SCREEN ADJUSTMENTS
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
The screen adjustments described in this manual are designed to set image position and minimize
flicker or blur for the particular computer in use.
The monitor is designed to provide the best performance at resolution of 1920 × 1080, but can not
provide the best at resolutions of less than 1920 × 1080 because the picture is automatically stretched
to fit the full screen. It is recommended to operate at resolution of 1920 × 1080 in normal use.
ENGLISH
Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to
the screen enlargement process.
It is preferable to adjust the image position and frequency with the monitor controls, rather than the
computer software or utilities.
Perform adjustments after a warm-up period of at least thirty minutes.
Additional adjustments may be required after the Auto Adjust depending on the resolution or signal
timing.
The Auto Adjust may not work correctly when displaying the picture other than the screen adjustment
pattern. In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for POSITION, CLOCK and
PHASE. The other way is performing each adjustment manually.
Perform the Auto Adjust first when the monitor is connected to a new computer, or resolution is
changed. If the screen has a flicker or blur, or the picture does not fit in the display area after
performing the Auto Adjust, manual adjustments are required. Both adjustments should be made by
using the screen adjustment pattern (Test.bmp) obtained via the IIYAMA web site (http://www.iiyama.
com).
Adjust the image by following the procedure below to get the desired picture.
This manual explains adjustment under Windows 95/98/2000/Me/XP/Vista/7.
A Display the picture at the optimum resolution.
B Enter the Test.bmp (screen adjustment pattern) to wallpaper.
NOTE
NOTE
Consult the appropriate documentation for doing this.
Test.bmp is made at resolution of 1280 × 1024. Set the display position to center in the
wallpaper setting dialogue box. If you use Microsoft® PLUS! 95/98 cancel the setting of
“Stretch desktop wallpaper to fit the screen”.
[Adjustment pattern]
Color bar
Zebra pattern
Picture frame
15
OPERATING THE MONITOR
Downloaded from ManualMonitor.com Manuals
C Press the Auto Button. (AUTO ADJUSTMENT)
D Adjust the image manually by following procedure below when the screen has a flicker or
blur, or the picture does not fit in the display area after performing the Auto Adjust.
ENGLISH
E Adjust the V.POSITION so that the top and bottom of the picture frame will fit to the display
area.
F 1) Adjust the H.POSITION so that the left side of the picture frame will move to the left edge
of the display area.
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the CLOCK.
NOTE
NOTE
When the left side of the picture frame moves apart from the left edge of the display
area during the CLOCK adjustment, adjust steps 1) and 2).
Another way to make the CLOCK adjustment is to correct the vertical wavy lines in the
zebra pattern.
The picture may flicker during the CLOCK, H.POSITION and V.POSITION adjustment.
In case the picture frame is bigger or smaller than the data display area after the
CLOCK adjustment, repeat steps from C.
OPERATING THE MONITOR
Downloaded from ManualMonitor.com Manuals
16
ENGLISH
G Adjust the PHASE to correct horizontal wavy noise, flicker or blur in the zebra pattern.
NOTE
NOTE
In case the strong flicker or blurs remain on a part of the screen, repeat steps F and
G because the CLOCK may not be adjusted correctly. If the flicker or blurs still remain,
set the refresh rate of computer to low (60Hz) and repeat steps from C again.
Adjust the H.POSITION after the PHASE adjustment if the horizontal position moves
during the adjustment.
H Adjust the Brightness and Color to get the desired picture after you complete the CLOCK
and PHASE adjustments.
Put back your favorite wallpaper.
17
OPERATING THE MONITOR
Downloaded from ManualMonitor.com Manuals
POWER MANAGEMENT FEATURE
The power management feature of this product complies with power saving requirement of VESA
DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when
your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There
is a power management step the monitor takes as described below. The power management function,
including any timer settings is configured by the operating system. Check your operating system
Power Management Mode
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor
enters into Power Management Mode which reduces the power consumption to less than 1W. The
screen becomes dark, and the power indicator turns to orange. From Power Management Mode,
the image reappears in several seconds when either the keyboard or the mouse are touched again.
Power Indicator
NORMAL MODE
POWER MANAGEMENT MODE
Blue
Orange
POWER 0
1W
CONSUMPTION
NOTE
100%
Even when using the power management mode, the monitor consumes electricity. Turn
off the Power Switch whenever the monitor is not in use, during the night and weekends,
to avoid unnecessary power consumption.
It is possible that the video signal from the computer may be on while the H or V sync
signal is missing. In this instance, the POWER MANAGEMENT feature may not work
properly.
OPERATING THE MONITOR
Downloaded from ManualMonitor.com Manuals
18
ENGLISH
manual for information on how this can be configured.
TROUBLE SHOOTING
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you
have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE
MONITOR or if the problem persists.
ENGLISH
3. If you are experiencing a problem which is not described below or you cannot correct the
problem, discontinue using the monitor and contact your dealer or iiyama service center for further
assistance.
Problem
Check
A The picture does
not appear.
(Power indicator
does not light up.)
The Power Cable is firmly seated in the socket.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
(Power indicator
is blue.)
If the blank screen saver is in active mode, touch the keyboard or the
mouse.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specification of the monitor.
(Power indicator
is orange.)
If the monitor is in power management mode, touch the keyboard or the
mouse.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specification of the monitor.
B The screen is not
synchronized.
The Signal Cable is properly connected.
The signal timing of the computer is within the specification of the monitor.
The video output level of the computer is within the specification of the
monitor.
C The screen
position is not in
the center.
The signal timing of the computer is within the specification of the monitor.
D The screen is too
bright or too dark.
The video output level of the computer is within the specification of the
monitor.
E The screen is
shaking.
The power voltage is within the specification of the monitor.
The signal timing of the computer is within the specification of the monitor.
19
TROUBLE SHOOTING
Downloaded from ManualMonitor.com Manuals
Problem
Check
The audio equipment (computer etc.) is ON.
The Audio Cable is properly connected.
The Volume is turned up.
The Mute is OFF.
The audio output level of the audio equipment is within the specification of
the monitor.
G The sound is too
loud or too quiet.
The audio output level of the audio equipment is within the specification of
the monitor.
H A strange noise is
heard.
The Audio Cable is properly connected.
ENGLISH
F No sound.
RECYCLING INFORMATION
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com/recycle for monitor recycling.
TROUBLESHOOTING / RECYCLING INFORMATION
Downloaded from ManualMonitor.com Manuals
20
APPENDIX
SPECIFICATIONS
22"
LCD Panel
Driving system
a-Si TFT Active Matrix
Size
Diagonal: 21.5" (54.6cm)
Pixel pitch
0.248mm H × 0.248mm V
Brightness
270cd/m2 (Typical)
Contrast ratio
1000 : 1 (Typical)
Viewable angle
Right / Left : 85 degrees each, Up : 85 degrees, Down : 75 degrees (Typical)
Response time
5ms (Typical)
ENGLISH
Size Category
Display Colors
Approx.16.7M
Sync Frequency
Horizontal: 31.0-82.0kHz, Vertical: 56-75Hz
Maximum Resolution
1920 × 1080, 2.1 MegaPixels
Input Connector
D-Sub mini 15 pin, DVI-D 24 pin
Plug & Play
VESA DDC2BTM
Input Sync Signal
Separate sync: TTL, Positive or Negative
Input Video Signal
Analog: 0.7Vp-p (Standard), 75Ω, Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Input Audio Connector
ø 3.5mm mini jack (Stereo)
Input Audio Signal
0.5Vrms maximum
Speakers
1W × 2 (Stereo speakers)
Maximum Screen Size
476.64mm W × 268.11mm H / 18.8" W × 10.6" H
Power Source
100-240VAC, 50/60Hz, 1.2A
Power Consumption
44W typical, Power management mode: 1W maximum*
Dimensions / Net Weight
513.0 × 419.0 × 263.0mm / 20.2 × 16.5 × 10.4" (W×H×D)
6.0kg / 13.2lbs
Tilt Angle
Upward: 20 degrees, Downward: 3 degrees
5 to 35°C / 41 to 95°F
Environmental Considerations Operating: Temperature
10 to 80% (No condensation)
Humidity
Storage: Temperature -20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
Humidity
Approvals
NOTE
21
CE, TÜV-Bauart, VCCI-B
* Audio equipment is not connected.
APPENDIX
Downloaded from ManualMonitor.com Manuals
DIMENSIONS
513.0mm/20.2"
478.0mm/18.8"
263.0mm/10.4"
ENGLISH
419.0mm/16.5"
269.5mm/10.6"
332.5mm/13.1"
75.0mm/2.9"
409.0mm/16.1"
COMPLIANT TIMING
Horizontal
Frequency
Vertical
Frequency
Dot Clock
31.469kHz
59.940Hz
25.175MHz
37.500kHz
75.000Hz
31.500MHz
37.879kHz
60.317Hz
40.000MHz
46.875kHz
75.000Hz
49.500MHz
48.363kHz
60.004Hz
65.000MHz
60.023kHz
75.029Hz
78.750MHz
63.981kHz
60.020Hz
108.000MHz
79.976kHz
75.025Hz
135.000MHz
55.935kHz
59.887Hz
106.500MHz
70.635kHz
74.984Hz
136.750MHz
1600 × 1200
75.000kHz
60.000Hz
162.000MHz
WSXGA+ 1680 × 1050
65.290kHz
60.000Hz
146.250MHz
Full HD
1920 × 1080
66.590kHz
59.930Hz
138.500MHz
640 × 480
35.000kHz
66.667Hz
30.240MHz
*
832 × 624
49.725kHz
74.500Hz
57.283MHz
*
Video Mode
VESA
VGA
640 × 480
SVGA
800 × 600
XGA
1024 × 768
SXGA
1280 × 1024
WXGA+ 1440 × 900
UXGA
VGA TEXT
NOTE * Digital input is not compliant.
APPENDIX
22
M056A02
Downloaded from ManualMonitor.com Manuals
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising