Aiwa | NSX-BL54 | NSX-BL54 NSX-AJ54 LH U

NSX-BL54
NSX-AJ54
LH
U
SERVICE MANUAL
COMPACT DISC
STEREO SYSTEM
BASIC TAPE MECHANISM : 2ZM-3MK2 YPR4NC(LH)
BASIC TAPE MECHANISM : ZZM-3 PR1NF(U)
BASIC CD MECHANISM : AZG-1 ZD8RDC(LH)
BASIC CD MECHANISM : AZG-1 YKZD8RDF(U)
SYSTEM
CD
CASSEIVER
SPEAKER
REMOTE
CONTROLLER
NSX–BL54
CX–NBL54
SX–WNBL53
RC–ZAS01
NSX–AJ54
CX–NAJ54
SX–WNAJ53
RC–ZAS02
This Service Manual is the "Revision Publishing" and replaces "Simple Manual"
(S/M Code No. 09-002-429-5T1).
S/M Code No. 09-002-429-5R3
DA
TA
RE
VI
SIO
N
If requiring information about the CD mechanism, see Service Manual of
AZG-1 ZD8RDC (S/M Code No. 09-001-335-3NA)/
AZG-1 YKZD8RDF (S/M Code No. 09-001-335-3N6).
SPECIFICATIONS
Main unit CX-NBL54/CX-NAJ54
FM tuner section
Tuning range
87.5 MHz to 108 MHz
Usable sensitivity (IHF)
13.2 dBf
Antenna terminal
75 ohms (unbalanced)
AM tuner section
Tuning range
Compact disc player section
Laser
Semiconductor laser (λ = 780 nm)
D-A converter
1 bit dual
Signal-to-noise ratio
85 dB (1 kHz, 0 dB)
Harmonic distortion
0.05 % (1 kHz, 0 dB)
Wow and flutter
Unmeasurable
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
350 µV/m
Loop antenna
Usable sensitivity
Antenna
General
Power requirements
120 V/220 – 230 V/240 V AC,
switchable 50/60 Hz <LH>
120 V AC, 60 Hz <U>
Power consumption
130 W <LH>, 110 W <U>
Power consumption in standby mode
If the power-economizing mode is
ECO OFF: 20 W
If the power-economizing mode is
ECO ON or ECO AUTO: 0.9 W
Dimensions of main unit
260 x 326 x 346 mm
(W x H x D)
(10 1/4 x 127/8 x 135/8 in.)
Weight of main unit
9.0 kg <LH>
8.0 kg (17 lbs 10 oz.) <U>
Amplifier section
Mid-high frequency amplifier
Power output
Rated: 20 W + 20 W (8 ohms,
T.H.D. 1 %, 1 kHz) <LH>
Reference : 25 W + 25 W (8 ohms,
T.H.D. 10 %, 1 kHz) <LH>
20 W + 20 W (200 Hz - 20kHz, THD
less than 1%, 8 ohms) <U>
Total harmonic distortion 0.1 % (10 W, 1 kHz, 8 ohms, DIN
AUDIO)
Low frequency amplifier
Power output
Rated: 60 W + 60 W (6 ohms,
T.H.D. 1 %, 130 Hz) <LH>
Reference : 75 W + 75 W (6 ohms,
T.H.D. 10 %, 130 Hz) <LH>
60 W + 60 W (50 Hz - 200 Hz, THD
less than 1%, 6 ohms) <U>
Total harmonic distortion 0.1 % (30W, 130 Hz, 6 ohms, DIN
AUDIO)
Inputs
VIDEO/AUX: 500 mV
MIC
1.0 mV (10 k ohms) <LH>
Outputs
SPEAKERS HIGH FREQ:
accept speakers of 8 ohms or more
SPEAKERS LOW FREQ:
accept speakers of 6 ohms or more
SURROUND SPEAKERS:
accept speakers of 8 ohms to 16
ohms
PHONES (stereo jack): accepts
headphones of 32 ohms or more
Cassette deck section
Track format
Frequency response
Recording system
Heads
Speaker system SX-WNBL53/SX-WNAJ53
Speaker system
3 way, Built-in subwoofer (magnetic
shielded type)
Speaker units
Subwoofer: 160 mm (63/8 in.)
cone type
Full range: 100 mm (4 in.)cone type
Super tweeter: 20 mm (13/16 in.)
ceramic type
Impedance
6 ohms/8 ohms
Sensitvity
87 dB/W/m
Dimensions (W x H x D)
230 x 324 x 282 mm
(91/8 x 127/8 x 111/8 in.)
Weight
4.8 kg (10 lbs 9 oz)
• Design and specifications are subject to change without notice.
• The word “BBE” and the “BBE symbol” are trademarks of BBE
Sound, Inc.
• Under license from BBE Sound, Inc.
4 tracks, 2 channels stereo
50 Hz – 15000 Hz
AC bias
Deck 1: Playback head x 1
Deck 2: Recording/playback head
x 1, erase head x 1
ACCESSORIES LIST
REF. NO
1
1
2
2
3
!
PART NO.
KANRI
NO.
8A-NFJ-902-010
8A-NFJ-913-010
8Z-NF8-702-010
8Z-NF9-702-010
87-006-268-010
3 87-A90-030-010
4 87-043-115-010
5 87-A91-017-010
DESCRIPTION
IB,LH(ESP)B<LH>
IB,U(ESF)M<U>
RC UNIT,RC-ZAS01<LH>
RC UNIT,ZAS02<U>
ANT,LOOP AM<U>
ANT,LOOP AM-NC C<LH>
FEEDER-ANT,FM
PLUG,CONVERSION JT-0476<LH>
2
PROTECTION OF EYES FROM LASER BEAM DURING SERVICING
This set employs laser. Therefore, be sure to follow carefully the
instructions below when servicing.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
WARNING!
WHEN SERVICING, DO NOT APPROACH THE LASER EXIT
WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO
CONFIRM LASER BEAM EMISSION. BE SURE TO OBSERVE
FROM A DISTANCE OF MORE THAN 30cm FROM THE
SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL
PICK-UP BLOCK.
ATTENTION
L'utilisation de commandes, réglages ou procédures autres que
ceux spécifiés peut entraîner une dangereuse exposition aux
radiations.
ADVARSEL!
Caution: Invisible laser radiation when
open and interlocks defeated avoid exposure to beam.
Advarsel:Usynling laserståling ved åbning,
når sikkerhedsafbrydere er ude af funktion.
Undgå udsættelse for stråling.
Usynlig laserståling ved åbning, når sikkerhedsafbrydereer ude
af funktion. Undgå udsættelse for stråling.
This Compact Disc player is classified as a CLASS 1 LASER
product.
The CLASS 1 LASER PRODUCT label is located on the rear
exterior.
VAROITUS!
Laiteen Käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyt-täjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
VARNING!
Om apparaten används på annat sätt än vad som specificeras i
denna bruksanvising, kan användaren utsättas för osynling
laserstrålning, som överskrider gränsen för laserklass 1.
ZA3/ZA4 (KSS-213F) MODEL
Precaution to replace Optical block
Body or clothes electrostatic potential could ruin
laser diode in the optical block. Be sure ground
body and workbench, and use care the clothes
do not touch the diode.
1) After the connection, remove solder shown in
the figure below.
ZA8/ZD8 MODEL
Solder
3
NOTE ON BEFORE STARTING REPAIR
1. Forced discharge of electrolytic capacitor of power supply block
When repair is going to be attempted in the set that uses relay circuit in the power supply block, electric potential is kept charged across
the electrolytic capacitors (C101, 102) even though AC power cord is removed. If repair is attempted in this condition, secondary defect
can occur.
In order to prevent the secondary trouble, perform the following measures before starting repair work.
Discharge procedure
1
2
3
4
5
MAIN C.B
Remove the AC power cord.
Connect a discharging resistor at an end of lead wire that
has clips at both ends. Connect the other end of the lead
wire to metal chassis.
Contact the other end of the discharging resistor to the
positive (+) side (+VH) of C101. (For two seconds)
Contact the same end of the discharging resistor as step 3
to the negative (-) side (-VH) of C102 in the same way.
(For two seconds)
Check that voltage across C101 and C102 has decreased
to 1 V or less using a multimeter or an oscilloscope.
D101
3
2
C101
C102
4
2
Select a discharging resistor referring to the following table.
Charging voltage (V)
Discharging
(C101, 102)
resistor (Ω)
25-48
100
3
87-A00-247-090
49-140
220
5
87-A00-232-090
Rated power (W)
Parts number
Note: The reference numbers (C101, C102) of the electrolytic capacitors can change depending on the models. Be sure to check the
reference numbers of the charging capacitors on schematic diagram before starting the discharging work.
2. Check items before exchanging the MICROCOMPUTER
Be sure to check the following items before exchanging the MICROCOMPUTER. Exchange the MICROCOMPUTER after confirming
that the MICROCOMPUTER is surely defective.
2-1. Regarding the HOLD terminal of the MICROCOMPUTER
When the HOLD terminal (INPUT) of the MICROCOMPUTER is “H”, the MICROCOMPUTER is judged to be operating correctly.
When this terminal is “L”, the main power cannot be turned on. Therefore, be sure to check the terminal voltage of the HOLD
terminal before exchange.
When the MICROCOMPUTER is not defective, the HOLD terminal can also go “L” when the POWER AMPLIFIER has any
abnormalities that triggers the abnormality detection circuit on the MAIN C. B. that sets the HOLD terminal to “L”.
• Good or no good judgement of the MICROCOMPUTER
1
2
3
Turn on the AC main power.
Confirm that the main power is turned on and the HOLD terminal of the MICROCOMPUTER keeps the “H” level or not.
When the HOLD terminal is “L” level, the abnormality detection circuit is judged to be working correctly and the
MICROCOMPUTER is judged to be good.
4
In such a case, check also if the POWER AMPLIFIER circuit or power supply circuit has any abnormalities or not.
2-2. Regarding reset
TE
R
There are cases that the machine does not work correctly because the MICROCOMPUTER is not reset even though the AC power
cord is re-inserted, or the software reset (pressing the STOP key + POWER key) is performed.
When the above described phenomenon occurs, it can lead to wrong judgement as if the MICROCOMPUTER is defective and to
exchange the MICROCOMPUTER. In such a case, perform the forced-reset by the following procedure and check good or no
good of the MICROCOMPUTER.
1 Remove the AC power cord.
M
IC
RO
CO
M
PU
FRONT C.B
15 VSS
18
15
MICROCOMPUTER
18 VDD
C113
C113
FRONT C.B
Short with tweezers.
Fig-2-2
2
3
Short both ends of the electrolytic capacitor C113 that is connected to VDD of the MICROCOMPUTER with tweezers.
Connect the AC power cord again. If the MICROCOMPUTER returns to the normal operation, the MICROCOMPUTER is
good.
Note: The reference number or MICROCOMPUTER pin number of transistor (Q110) and electrolytic capacitor (C113) can change depending
on the models. Be sure to check the reference numbers on schematic diagram before starting the discharging work.
2-3. Confirmation of soldering state of MICROCOMPUTER
Check the soldering state of the MICROCOMPUTER in addition to the above described procedures. Be sure to exchange the
MICROCOMPUTER after surely confirming that the trouble is not caused by poor soldering but the MICROCOMPUTER itself.
5
ELECTRICAL MAIN PARTS LIST
REF. NO
PART NO.
KANRI
NO.
DESCRIPTION
REF. NO
IC
87-A21-269-010
87-020-454-010
87-A21-417-010
8A-NF8-612-110
87-A21-396-010
IC,EW732<U>
IC,DN6851<LH>
IC,STK490-310
C-IC,LC866548V-5P40
IC,STK490-040
87-A21-629-010
87-A21-419-040
87-A21-023-040
87-070-289-040
87-A21-401-040
IC,SPS-442-1-N
C-IC,NJM14558MD-TE2
C-IC,BA3835F
C-IC,BU2092F
C-IC,M61503FP
87-A21-415-010
87-070-127-110
IC,LA1843
IC,LC72131D
TRANSISTOR
87-026-451-080
87-026-609-080
89-213-702-010
87-026-610-080
87-A30-076-080
TR,2SA933S<LH>
TR,KTA1266GR
TR,2SB1370E
TR,KTC3198GR
C-TR,2SC3052F
87-A30-075-080
87-026-245-080
87-A30-198-080
87-A30-107-070
87-A30-106-040
C-TR,2SA1235F
TR,DTC114ES
TR,KTC3199GR
C-TR,CMBT5401
C-TR,CMBT5551
87-A30-087-080
87-A30-074-080
87-A30-318-080
87-A30-091-080
87-A30-329-080
C-FET,2SK2158
C-TR,RT1P 141C
TR,CSA952K
FET,2SJ460
TR,CD1585BC
87-A30-090-080
87-A30-104-080
87-A30-468-080
87-A30-484-080
89-333-317-880
FET,2SK2541
C-TR,RT1N 441C
C-TR,KRC102S-RTK
C-TR,KRA102S<U>
TR,2SC3331(T/U)
87-A30-269-040
89-327-143-080
87-A30-489-080
87-A30-234-080
C-FET,2SJ461-T1
C-TR,2SC2714O
C-TR,KRA107S
TR,CSC4115BC
87-A40-393-090
87-020-465-080
87-A40-548-090
87-A40-547-090
87-A40-455-080
DIODE,1N5402GW(F20)
DIODE,1SS133
DIODE,D3SBA20<U>
DIODE,D5SBA20<LH>
DIODE,RL203 GW
87-A40-553-080
87-A40-776-080
87-A40-764-080
87-A40-270-080
87-A40-313-080
DIODE,1N4003 LES
ZENER,UZ27BSD
ZENER,UZ10BSC
C-DIODE,MC2838
C-DIODE,MC2840
87-A40-269-080
87-A40-768-080
87-A40-752-080
87-A40-802-080
87-A40-739-080
C-DIODE,MC2836
ZENER,UZ16BSA
ZENER,UZ6.2BSC
ZENER,UZ5.1BSC
ZENER,UZ2.7BSA
87-017-149-080
ZENER,HZS6A2L
DIODE
MAIN C.B
C0003
C0004
C0005
C0006
C0009
87-012-368-080
87-012-368-080
87-012-368-080
87-012-368-080
87-012-368-080
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
0.1-50
0.1-50
0.1-50
0.1-50
0.1-50
Z
Z
Z
Z
Z
F
F
F
F
F
C0010
87-012-368-080
C-CAP,S 0.1-50 Z F
6
PART NO.
KANRI
NO.
DESCRIPTION
C0011
C0012
C0015
C0016
C0017
87-012-368-080
87-012-368-080
87-012-368-080
87-012-368-080
87-012-368-080
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
0.1-50
0.1-50
0.1-50
0.1-50
0.1-50
Z
Z
Z
Z
Z
F
F
F
F
F
C0018
C0019
C0020
C0021
C0022
87-012-368-080
87-016-520-000
87-016-520-000
87-016-051-000
87-016-051-000
C-CAP,S 0.1-50 Z F
CAP,E 3300-65 M SMG
CAP,E 3300-65 M SMG
CAP,E 2200-35 M SMG
CAP,E 2200-35 M SMG
C0023
C0024
C0025
C0026
C0030
87-016-658-000
87-016-658-000
87-010-408-080
87-010-247-080
87-010-430-080
CAP,E
CAP,E
CAP,E
CAP,E
CAP,E
C0031
C0032
C0033
C0034
C0035
87-010-263-080
87-010-197-080
87-010-263-080
87-010-260-080
87-010-380-080
CAP,E 100-10 M 11L SME
C-CAP,S 0.01-25 K B C2012
CAP,E 100-10 M 11L SME<U>
CAP,E 47-25 M 11L SME
CAP,E 47-16 M 11L SME
C0036
C0038
C0060
C0061
C0101
87-010-381-080
87-010-197-080
87-010-403-080
87-010-260-080
87-010-183-080
CAP,E 330-16 M SME
C-CAP,S 0.01-25 K B C2012
CAP,E 3.3-50 M 11L SME
CAP,E 47-25 M 11L SME
C-CAP,S 2700P-50 K B GRM
C0102
C0103
C0104
C0107
C0108
87-010-183-080
87-010-545-080
87-010-545-080
87-010-405-080
87-010-405-080
C-CAP,S 2700P-50 K B GRM
CAP,E 0.22-50 M 11L SME
CAP,E 0.22-50 M 11L SME
CAP,E 10-50 M 11L SME
CAP,E 10-50 M 11L SME
C0111
C0112
C0113
C0114
C0119
87-010-405-080
87-010-405-080
87-010-866-080
87-010-866-080
87-010-197-080
CAP,E 10-50 M 11L SME
CAP,E 10-50 M 11L SME
CAP,E 10-63 M VX
CAP,E 10-63 M VX
C-CAP,S 0.01-25 K B C2012
C0120
C0125
C0126
C0127
C0128
87-010-197-080
87-012-368-080
87-012-368-080
87-012-368-080
87-012-368-080
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
0.01-25 K B C2012
0.1-50 Z F
0.1-50 Z F
0.1-50 Z F
0.1-50 Z F
C0133
C0140
C0141
C0203
C0204
87-010-186-080
87-010-182-080
87-010-196-080
87-010-182-080
87-010-182-080
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
4700P-50
2200P-50
0.1-25 Z
2200P-50
2200P-50
C0205
C0206
C0209
C0210
C0211
87-012-140-080
87-012-140-080
87-010-402-080
87-010-402-080
87-010-184-080
C-CAP,S 470P-50 J CH
C-CAP,S 470P-50 J CH
CAP,E 2.2-50 M 11L SME
CAP,E 2.2-50 M 11L SME
C-CAP,S 3300P-50 K B C2012
C0212
C0213
C0214
C0217
C0218
87-010-184-080
87-010-402-080
87-010-402-080
87-010-405-080
87-010-405-080
C-CAP,S 3300P-50 K B C2012
CAP,E 2.2-50 M 11L SME
CAP,E 2.2-50 M 11L SME
CAP,E 10-50 M 11L SME
CAP,E 10-50 M 11L SME
C0220
C0223
C0224
C0228
C0229
87-010-405-080
87-010-190-080
87-010-190-080
87-010-405-080
87-010-196-080
CAP,E 10-50 M 11L SME
C-CAP,S 0.01-50 Z F C2012
C-CAP,S 0.01-50 Z F C2012
CAP,E 10-50 M 11L SME
C-CAP,S 0.1-25 Z F C2012
C0230
C0231
C0232
C0239
C0301
87-010-196-080
87-010-196-080
87-010-196-080
87-010-196-080
87-010-178-080
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
F
F
F
F
K
C2012
C2012
C2012
C2012
B C2012
C0302
C0303
C0304
C0307
C0308
87-010-178-080
87-010-178-080
87-010-178-080
87-010-263-080
87-010-263-080
C-CAP,S 1000P-50 K
C-CAP,S 1000P-50 K
C-CAP,S 1000P-50 K
CAP,E 100-10 M 11L
CAP,E 100-10 M 11L
B C2012
B C2012
B C2012
SME
SME
4700-35 M SMG
4700-35 M SMG
47-50 M 11L SME
100-50 M SME
100-63
0.1-25 Z
0.1-25 Z
0.1-25 Z
0.1-25 Z
1000P-50
K
K
F
K
K
B C2012
B C2012
C2012
B C2012
B C2012
REF. NO
PART NO.
C0309
C0310
C0313
C0314
C0315
KANRI
DESCRIPTION
NO.
87-010-318-080
C-CAP,S 47P-50 J CH GRM
87-010-318-080
C-CAP,S 47P-50 J CH GRM
87-010-188-080
C-CAP,S 6800P-50 K B C2012
87-010-188-080
C-CAP,S 6800P-50 K B C2012
87-010-263-080
CAP,E 100-10 M 11L SME
REF. NO
C0673
C0677
C0771
C0772
C0782
KANRI
DESCRIPTION
NO.
87-010-182-080
C-CAP,S 2200P-50 K B C2012<LH>
87-010-197-080
C-CAP,S 0.01-25 K B C2012
87-010-263-080
CAP,E 100-10 M 11L SME
87-010-197-080
C-CAP,S 0.01-25 K B C2012
87-010-197-080
C-CAP,S 0.01-25 K B C2012
C0317
C0318
C0326
C0327
C0360
87-010-546-080
87-010-546-080
87-010-198-080
87-012-368-080
87-010-401-080
CAP,E 0.33-50 M 11L SME
CAP,E 0.33-50 M 11L SME
C-CAP,S 0.022-25 K B C2012
C-CAP,S 0.1-50 Z F
CAP,E 1-50 M 11L SME
C0783
C0784
C0785
C0786
C0788
87-010-197-080
87-010-197-080
87-010-197-080
87-010-197-080
87-010-149-080
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C0399
C0401
C0402
C0403
C0404
87-012-140-080
87-010-544-080
87-010-544-080
87-010-321-080
87-010-321-080
C-CAP,S 470P-50 J CH
CAP,E 0.1-50 M 11L SME
CAP,E 0.1-50 M 11L SME
C-CAP,S 82P-50 J CH
C-CAP,S 82P-50 J CH
C0789
C0790
C0791
C0792
C0793
87-A12-052-080
87-A12-052-080
87-010-196-080
87-010-197-080
87-010-404-080
C-CAP,S 0.033-25 J B
C-CAP,S 0.033-25 J B
C-CAP,S 0.1-25 Z F C2012
C-CAP,S 0.01-25 K B C2012
CAP,E 4.7-50 M 11L SME
C0405
C0406
C0407
C0408
C0409
87-010-197-080
87-010-197-080
87-010-197-080
87-010-197-080
87-010-182-080
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
0.01-25 K B C2012
0.01-25 K B C2012
0.01-25 K B C2012
0.01-25 K B C2012
2200P-50 K B C2012
C0795
C0796
C0797
C0798
C0799
87-010-197-080
87-010-197-080
87-010-405-080
87-010-197-080
87-010-407-080
C-CAP,S 0.01-25 K
C-CAP,S 0.01-25 K
CAP,E 10-50 M 11L
C-CAP,S 0.01-25 K
CAP,E 33-50 M 11L
C0410
C0411
C0412
C0452
C0453
87-010-182-080
87-010-405-080
87-010-405-080
87-010-382-080
87-010-183-080
C-CAP,S 2200P-50 K B C2012
CAP,E 10-50 M 11L SME
CAP,E 10-50 M 11L SME
CAP,E 22-25 M 11L SME
C-CAP,S 2700P-50 K B GRM
C0800
C0801
C0802
C0803
C0804
87-012-369-080
87-010-403-080
87-010-194-080
87-010-198-080
87-010-263-080
C-CAP,S 0.047-50 Z
CAP,E 3.3-50 M 11L
C-CAP,S 0.047-25 Z
C-CAP,S 0.022-25 K
CAP,E 100-10 M 11L
C0454
C0455
C0456
C0458
C0459
87-010-183-080
87-010-183-080
87-010-197-080
87-010-178-080
87-010-175-080
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
2700P-50 K B GRM
2700P-50 K B GRM
0.01-25 K B C2012
1000P-50 K B C2012
560P-50 J SL
C0807
C0808
C0809
C0810
C0814
87-010-400-080
87-010-401-080
87-010-401-080
87-010-196-080
87-010-197-080
CAP,E 0.47-50 M 11L SME
CAP,E 1-50 M 11L SME
CAP,E 1-50 M 11L SME
C-CAP,S 0.1-25 Z F C2012
C-CAP,S 0.01-25 K B C2012
C0460
C0461
C0462
C0507
C0508
87-010-196-080
87-012-158-080
87-012-158-080
87-010-196-080
87-010-178-080
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
0.1-25 Z F C2012
390P-50 J CH GRM
390P-50 J CH GRM
0.1-25 Z F C2012
1000P-50 K B C2012
C0815
C0816
C0821
C0823
C0824
87-010-400-080
87-010-400-080
87-010-405-080
87-010-177-080
87-010-405-080
CAP,E 0.47-50 M 11L SME
CAP,E 0.47-50 M 11L SME
CAP,E 10-50 M 11L SME
C-CAP,S 820P-50 J SL C2012
CAP,E 10-50 M 11L SME
C0509
C0510
C0515
C0516
C0518
87-A10-300-080
87-A10-300-080
87-A10-300-080
87-A10-300-080
87-010-196-080
CAP,M 0.027-50
CAP,M 0.027-50
CAP,M 0.027-50
CAP,M 0.027-50
C-CAP,S 0.1-25
C0825
C0842
C0844
C0850
C0851
87-010-596-080
87-010-197-080
87-010-197-080
87-010-260-080
87-010-197-080
C-CAP,S 0.047-16 K R C2012
C-CAP,S 0.01-25 K B C2012
C-CAP,S 0.01-25 K B C2012
CAP,E 47-25 M 11L SME
C-CAP,S 0.01-25 K B C2012
C0519
C0520
C0521
C0522
C0523
87-010-401-080
87-010-401-080
87-010-546-080
87-010-546-080
87-010-545-080
CAP,E
CAP,E
CAP,E
CAP,E
CAP,E
C0852
C0853
C0858
C0859
C0860
87-010-197-080
87-010-197-080
87-010-196-080
87-010-196-080
87-010-197-080
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C0524
C0525
C0526
C0605
C0606
87-010-545-080
87-010-545-080
87-010-545-080
87-010-179-080
87-010-179-080
CAP,E 0.22-50 M 11L SME
CAP,E 0.22-50 M 11L SME
CAP,E 0.22-50 M 11L SME
C-CAP,S 1200P-50 K B GRM
C-CAP,S 1200P-50 K B GRM
C0959
C0960
C0961
C0963
C0971
87-010-196-080
87-010-196-080
87-010-152-080
87-015-785-080
87-010-381-080
C-CAP,S 0.1-25 Z F C2012
C-CAP,S 0.1-25 Z F C2012
C-CAP,S 8P-50 D CH GRM
C-CAP, 0.1-25 Z F C3216
CAP,E 330-16 M SME
C0609
C0610
C0611
C0612
C0613
87-010-213-080
87-010-213-080
87-010-545-080
87-010-545-080
87-010-545-080
C-CAP,S 0.015-25 K B GRM
C-CAP,S 0.015-25 K B GRM
CAP,E 0.22-50 M 11L SME
CAP,E 0.22-50 M 11L SME
CAP,E 0.22-50 M 11L SME
C0972
C0973
C0974
C0979
C0981
87-010-404-080
87-010-197-080
87-010-197-080
87-010-322-080
87-010-260-080
CAP,E 4.7-50 M 11L SME
C-CAP,S 0.01-25 K B C2012
C-CAP,S 0.01-25 K B C2012
C-CAP,S 100P-50 J CH GRM
CAP,E 47-25 M 11L SME
C0614
C0615
C0616
C0617
C0618
87-010-545-080
87-010-154-080
87-010-385-080
87-010-385-080
87-010-405-080
CAP,E 0.22-50 M 11L SME
C-CAP,S 10P-50 D CH GRM
CAP,E 220-25 M SME
CAP,E 220-25 M SME
CAP,E 10-50 M 11L SME
C0982
C0983
C0984
C0987
C0991
87-010-196-080
87-010-197-080
87-010-197-080
87-010-197-080
87-010-312-080
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C0620
C0630
C0631
C0632
C0633
87-010-263-080
87-016-669-080
87-010-185-080
87-010-185-080
87-016-369-080
CAP,E 100-10 M 11L
C-CAP,S 0.1-25 K B
C-CAP,S 3900P-50 K
C-CAP,S 3900P-50 K
C-CAP,S 0.033-25 K
B
B
B GRM
C0992
C0993
C0995
C0997
C0998
87-010-312-080
87-010-178-080
87-010-178-080
87-010-196-080
87-010-260-080
C-CAP,S 15P-50 J CH GRM
C-CAP,S 1000P-50 K B C2012
C-CAP,S 1000P-50 K B C2012
C-CAP,S 0.1-25 Z F C2012
CAP,E 47-25 M 11L SME
C0634
C0661
C0662
C0671
C0672
87-016-369-080
87-010-178-080
87-010-178-080
87-010-196-080
87-010-196-080
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
B GRM
B C2012
B C2012
C2012<LH>
C2012<LH>
C0999
CF0831
CF0832
CN0301
CN0351
87-A11-132-080
87-008-261-010
87-008-261-010
87-A60-620-010
87-A60-625-010
CAP,TC U 0.01-50 K B
FLTR,CF SFE10.7MA5
FLTR,CF SFE10.7MA5
CONN,3P V 2MM JMT
CONN,8P V 2MM JMT
J
J
J
J
Z F C2012
1-50 M 11L SME
1-50 M 11L SME
0.33-50 M 11L SME
0.33-50 M 11L SME
0.22-50 M 11L SME
0.033-25
1000P-50
1000P-50
0.1-25 Z
0.1-25 Z
K
K
K
F
F
SME
7
PART NO.
0.01-25
0.01-25
0.01-25
0.01-25
5P-50 C
K B C2012
K B C2012
K B C2012
K B C2012
CH GRM
B C2012
B C2012
SME
B C2012
SME
F
SME
F
B C2012
SME
0.01-25 K B C2012
0.01-25 K B C2012
0.1-25 Z F C2012
0.1-25 Z F C2012
0.01-25 K B C2012
0.1-25 Z F C2012
0.01-25 K B C2012
0.01-25 K B C2012
0.01-25 K B C2012
15P-50 J CH GRM
REF. NO
PART NO.
KANRI
NO.
DESCRIPTION
CN0601
CN0602
CNA0001
FFC602
FFE0831
87-099-719-010
87-A60-131-010
8A-NF8-654-010
88-906-251-110
A8-8ZA-191-030
CONN,30P H BLK TYK-B(X)
CONN,6P V FE
CONN ASSY,11P TID-A(480)
FF-CABLE,6P 1.25
8ZA-1 YFEUNM<U>
C0315
C0316
C0321
C0322
C0325
KANRI
DESCRIPTION
NO.
87-010-196-080
C-CAP,S 0.1-25 Z F C2012
87-010-196-080
C-CAP,S 0.1-25 Z F C2012
87-012-393-080
C-CAP,S 0.22-16 K W5R CM/CB
87-010-400-040
CAP,E 0.47-50 M 11L SME
87-A10-189-040
CAP,E 220-10 M 5L
FFE0831
J0201
J0203
J0204
J0205
A8-8ZA-193-070
87-A60-483-010
87-A60-238-010
87-A61-153-010
87-A61-157-010
8ZA-1 YFEUNC<LH>
JACK,DIA6.3 BLK ST W/S KM
TERMINAL,SP 4P (MSC)
JACK,PIN 4P R/W(BL) (SEPA) KM<U>
JACK,PIN 2P R/W/BL V(SEPA) KM<LH>
C0326
C0332
C0334
C0335
C0336
87-A10-189-040
87-010-178-080
87-010-312-080
87-012-140-080
87-012-155-080
CAP,E 220-10 M 5L
C-CAP,S 1000P-50 K B C2012
C-CAP,S 15P-50 J CH GRM
C-CAP,S 470P-50 J CH
C-CAP,S 180P-50 J CH GRM
J0602
J0831
L0101
L0102
L0201
87-A60-881-010
87-A60-202-010
87-003-383-010
87-003-383-010
87-003-383-010
JACK,PIN 2P MSP 242V05 PBSN
TERMINAL,ANT 4P MSP-154V-02
COIL,1UH K
COIL,1UH K
COIL,1UH K
C0339
C0340
C0341
C0351
C0401
87-012-156-080
87-010-197-080
87-010-194-080
87-010-981-040
87-010-197-080
C-CAP,S 220P-50 J CH GRM
C-CAP,S 0.01-25 K B C2012
C-CAP,S 0.047-25 Z F
CAP,E 22-35 M 5L SRE
C-CAP,S 0.01-25 K B C2012
L0202
L0451
L0801
L0802
L0811
87-003-383-010
87-007-342-010
87-A50-540-010
87-A91-551-010
87-005-847-080
COIL,1UH K
COIL,OSC 85KHZ BIAS
COIL,FM DET(TOK)
FLTR,PCFJZH-450 L(TOK)
COIL,2.2UH K CECS
C0451
C0452
C0453
C0454
C0455
87-010-196-080
87-010-196-080
87-010-196-080
87-010-196-080
87-010-196-080
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
L0832
L0951
R0129
R0130
R0143
87-005-847-080
8A-NF8-667-010
87-A00-257-080
87-A00-257-080
87-A00-439-050
COIL,2.2UH K CECS
COIL,AM PACK 4(TOK)
RES,M/F 0.15-1W J
RES,M/F 0.15-1W J
RES,180-1/2W J RP<U>
C0502
C0503
C0504
C0505
C0506
87-010-186-080
87-010-112-040
87-010-405-040
87-010-545-040
87-010-320-080
C-CAP,S 4700P-50 K B C2012<LH>
CAP,E 100-16 M 11L SME<LH>
CAP,E 10-50 M 11L SME<LH>
CAP,E 0.22-50 M 11L SME<LH>
C-CAP,S 68P-50 J CH GRM<LH>
R0143
R0144
R0144
R0145
R0145
87-A00-440-050
87-A00-439-050
87-A00-440-050
87-A00-439-050
87-A00-440-050
RES,220-1/2W
RES,180-1/2W
RES,220-1/2W
RES,180-1/2W
RES,220-1/2W
C0507
C0508
C0510
C0511
C0512
87-010-544-040
87-010-544-040
87-010-322-080
87-010-265-040
87-010-178-080
CAP,E 0.1-50 M 11L SME<LH>
CAP,E 0.1-50 M 11L SME<LH>
C-CAP,S 100P-50 J CH GRM<LH>
CAP,E 33-16 M 11L SME<LH>
C-CAP,S 1000P-50 K B C2012<LH>
R0146
R0146
R0233
R0234
R0790
87-A00-439-050
87-A00-440-050
87-A00-258-080
87-A00-258-080
87-010-197-080
RES,180-1/2W J RP<U>
RES,220-1/2W J RP<LH>
RES,M/F 0.22-1W J
RES,M/F 0.22-1W J
C-CAP,S 0.01-25 K B C2012
C0513
C0515
C0602
C0603
C0604
87-010-196-080
87-010-178-080
87-010-322-080
87-010-322-080
87-010-322-080
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
R0991
R0993
R0995
SFR0451
SFR0452
87-010-322-080
87-010-322-080
87-010-322-080
87-A90-432-080
87-A90-432-080
C-CAP,S
C-CAP,S
C-CAP,S
SFR,30K
SFR,30K
C0650
C0699
CN0101
CN0102
CN0301
87-010-196-080
87-010-196-080
87-099-720-010
87-099-015-010
87-A60-140-010
C-CAP,S 0.1-25 Z F C2012
C-CAP,S 0.1-25 Z F C2012
CONN,30P BLK TYK-B(P)
CONN,13P V BLK 6216
CONN,15P V FE<LH>
WH0001
X0991
87-A91-179-010
87-A70-061-010
HLDR,WIRE 2.5-11P
VIB,XTAL 4.500MHZ CSA-309
CN0302
FB0301
FB0501
FFC102
FFC105
87-A60-136-010
87-008-372-080
87-008-372-080
88-913-301-110
88-911-101-110
CONN,11P V FE<U>
FLTR,EMI BL01 RN1
FLTR,EMI BL01 RN1<LH>
FF-CABLE,13P-1.25
FF-CABLE,11P 1.25<U>
C0201
C0202
C0203
C0204
C0205
87-010-322-080
87-010-322-080
87-010-322-080
87-010-322-080
87-010-322-080
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
100P-50
100P-50
100P-50
100P-50
100P-50
J
J
J
J
J
CH
CH
CH
CH
CH
GRM
GRM
GRM
GRM
GRM
FFC105
FL0401
J0501
L0331
LED0311
88-915-101-110
8A-NF8-601-010
87-A61-242-010
87-A50-408-010
87-A40-589-040
FF-CABLE, 15P 1.25 100MM<LH>
FL,HNA-11MM30(ANF-8)
JACK,6.3 BLK MONO W/SW V KM<LH>
COIL,OSC 5.76MHZ
LED,SLR-56VCT31 RED
C0206
C0207
C0208
C0209
C0210
87-010-322-080
87-010-322-080
87-010-322-080
87-010-322-080
87-010-322-080
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
C-CAP,S
100P-50
100P-50
100P-50
100P-50
100P-50
J
J
J
J
J
CH
CH
CH
CH
CH
GRM
GRM
GRM
GRM
GRM
LED0601
LED0602
LED0603
LED0604
LED0605
87-A40-803-010
87-A40-619-080
87-A40-619-080
87-A40-619-080
87-A40-619-080
LED,SELU1E10CXM-S LF38 BLUE
LED,SLR-56PT-TE7-W GRN
LED,SLR-56PT-TE7-W GRN
LED,SLR-56PT-TE7-W GRN<LH>
LED,SLR-56PT-TE7-W GRN<U>
C0211
C0251
C0253
C0254
C0255
87-010-322-080
87-010-405-040
87-010-196-080
87-012-369-080
87-010-560-040
C-CAP,S 100P-50 J CH GRM
CAP,E 10-50 M 11L SME
C-CAP,S 0.1-25 Z F C2012
C-CAP,S 0.047-50 Z F
CAP,E 10-50 M 5L MA
LED0606
LED0607
LED0608
S0401
S0401
87-A40-619-080
87-A40-619-080
87-A40-619-080
87-A90-095-080
87-A91-024-180
LED,SLR-56PT-TE7-W GRN<LH>
LED,SLR-56PT-TE7-W GRN
LED,SLR-56PT-TE7-W GRN
SW,TACT EVQ11G04M<U>
SW,TACT KSHG611BT<LH>
C0256
C0259
C0264
C0273
C0274
87-010-405-040
87-010-405-040
87-A11-148-080
87-010-178-080
87-010-178-080
CAP,E 10-50 M 11L SME
CAP,E 10-50 M 11L SME
CAP,TC U 0.1-50 Z F
C-CAP,S 1000P-50 K B C2012
C-CAP,S 1000P-50 K B C2012
S0402
S0402
S0403
S0403
S0404
87-A90-095-080
87-A91-024-180
87-A90-095-080
87-A91-024-180
87-A90-095-080
SW,TACT
SW,TACT
SW,TACT
SW,TACT
SW,TACT
EVQ11G04M<U>
KSHG611BT<LH>
EVQ11G04M<U>
KSHG611BT<LH>
EVQ11G04M<U>
C0301
C0302
C0303
C0312
C0314
87-010-182-080
87-010-196-080
87-010-196-080
87-010-498-040
87-010-196-080
C-CAP,S 2200P-50
C-CAP,S 0.1-25 Z
C-CAP,S 0.1-25 Z
CAP,E 10-16 M 5L
C-CAP,S 0.1-25 Z
S0404
S0405
S0405
S0406
S0406
87-A91-024-180
87-A90-095-080
87-A91-024-180
87-A90-095-080
87-A91-024-180
SW,TACT
SW,TACT
SW,TACT
SW,TACT
SW,TACT
KSHG611BT<LH>
EVQ11G04M<U>
KSHG611BT<LH>
EVQ11G04M<U>
KSHG611BT<LH>
J
J
J
J
J
REF. NO
RP<LH>
RP<U>
RP<LH>
RP<U>
RP<LH>
100P-50 J CH GRM
100P-50 J CH GRM
100P-50 J CH GRM
H NVZ6TLTA
H NVZ6TLTA
FRONT C.B
K B C2012
F C2012
F C2012
SRE
F C2012
8
PART NO.
0.1-25
0.1-25
0.1-25
0.1-25
0.1-25
Z
Z
Z
Z
Z
F
F
F
F
F
C2012
C2012
C2012
C2012
C2012
0.1-25 Z F C2012<LH>
1000P-50 K B C2012<LH>
100P-50 J CH GRM
100P-50 J CH GRM
100P-50 J CH GRM
DESCRIPTION
REF. NO
S0407
S0407
S0408
S0408
S0409
KANRI
NO.
87-A90-095-080
SW,TACT
87-A91-024-180
SW,TACT
87-A90-095-080
SW,TACT
87-A91-024-180
SW,TACT
87-A90-095-080
SW,TACT
EVQ11G04M<U>
KSHG611BT<LH>
EVQ11G04M<U>
KSHG611BT<LH>
EVQ11G04M<U>
CON105
CON105
SFR1
SOL1
SOL2
KANRI
DESCRIPTION
NO.
87-099-753-010
CONN,11P 9604 S F<U>
87-099-756-010
CONN,15P 9604 S F<LH>
87-024-581-010
SFR,3.3K DIA 6H
82-ZM1-618-410
SOL ASSY,27
82-ZM1-618-410
SOL ASSY,27
S0409
S0410
S0410
S0411
S0411
87-A91-024-180
87-A90-095-080
87-A91-024-180
87-A90-095-080
87-A91-024-180
SW,TACT
SW,TACT
SW,TACT
SW,TACT
SW,TACT
KSHG611BT<LH>
EVQ11G04M<U>
KSHG611BT<LH>
EVQ11G04M<U>
KSHG611BT<LH>
SW1
SW1
SW2
SW2
SW3
87-A90-673-010
87-A90-248-010
87-A91-500-010
87-A90-248-010
87-A91-500-010
SW,MICRO
SW,MICRO
SW,MICRO
SW,MICRO
SW,MICRO
ESE11SH1C<U>
ESE11SH2CXQ<LH>
MPU11470MLB0<U>
ESE11SH2CXQ<LH>
MPU11470MLB0<U>
S0412
S0413
S0413
S0414
S0414
87-A91-024-180
87-A90-095-080
87-A91-024-180
87-A90-095-080
87-A91-024-180
SW,TACT
SW,TACT
SW,TACT
SW,TACT
SW,TACT
KSHG611BT<LH>
EVQ11G04M<U>
KSHG611BT<LH>
EVQ11G04M<U>
KSHG611BT<LH>
SW3
SW4
SW4
SW5
SW5
87-A90-248-010
87-A91-500-010
87-036-110-010
87-A90-673-010
87-036-110-010
SW,MICRO
SW,MICRO
SW,MICRO
SW,MICRO
SW,MICRO
ESE11SH2CXQ<LH>
MPU11470MLB0<U>
SPPB62<LH>
ESE11SH1C<U>
SPPB62<LH>
S0415
S0415
S0416
S0416
S0417
87-A90-095-080
87-A91-024-180
87-A90-095-080
87-A91-024-180
87-A90-095-080
SW,TACT
SW,TACT
SW,TACT
SW,TACT
SW,TACT
EVQ11G04M<U>
KSHG611BT<LH>
EVQ11G04M<U>
KSHG611BT<LH>
EVQ11G04M<U>
SW6
SW8
SW9
W1
87-036-110-010
87-A90-248-010
87-A90-248-010
82-ZM3-601-010
SW,MICRO SPPB62<LH>
SW,MICRO ESE11SH2CXQ<LH>
SW,MICRO ESE11SH2CXQ<LH>
RBN,CORD,4P-75<LH>
S0417
S0418
S0418
S0419
S0419
87-A91-024-180
87-A90-095-080
87-A91-024-180
87-A90-095-080
87-A91-024-180
SW,TACT
SW,TACT
SW,TACT
SW,TACT
SW,TACT
KSHG611BT<LH>
EVQ11G04M<U>
KSHG611BT<LH>
EVQ11G04M<U>
KSHG611BT<LH>
HEAD-1 C.B<LH>
S0420
S0425
S0425
S0426
S0426
87-A91-024-180
87-A90-095-080
87-A91-024-180
87-A90-095-080
87-A91-024-180
SW,TACT
SW,TACT
SW,TACT
SW,TACT
SW,TACT
KSHG611BT<LH>
EVQ11G04M<U>
KSHG611BT<LH>
EVQ11G04M<U>
KSHG611BT<LH>
HEAD-2 C.B<LH>
S0432
S0432
S0433
S0433
S0434
87-A90-095-080
87-A91-024-180
87-A90-095-080
87-A91-024-180
87-A90-095-080
SW,TACT
SW,TACT
SW,TACT
SW,TACT
SW,TACT
EVQ11G04M<U>
KSHG611BT<LH>
EVQ11G04M<U>
KSHG611BT<LH>
EVQ11G04M<U>
PT C.B
S0434
S0435
S0435
S0436
S0436
87-A91-024-180
87-A90-095-080
87-A91-024-180
87-A90-095-080
87-A91-024-180
SW,TACT
SW,TACT
SW,TACT
SW,TACT
SW,TACT
KSHG611BT<LH>
EVQ11G04M<U>
KSHG611BT<LH>
EVQ11G04M<U>
KSHG611BT<LH>
S0437
S0437
SW0252
SW0253
VR0501
87-A90-095-080
87-A91-024-180
87-A91-555-010
87-A91-542-010
86-NFA-607-010
SW,TACT
SW,TACT
SW,RTRY
SW,RTRY
VR,RTRY
EVQ11G04M<U>
KSHG611BT<LH>
EC12E24504
EC12E12504
10K15AX1 1 V XV0121PVN<LH>
REF. NO
PART NO.
CON301
PART NO.
85-ZM3-602-010
87-NF6-615-010
PWB,FLEX A<LH>
CONN ASSY,3P PB<LH>
85-ZM3-602-010
87-NF6-616-010
PWB,FLEX A<LH>
CONN ASSY,8P-RPB<LH>
C0001
C0031
CN0001
!PT0001
!PT0001
87-010-387-080
87-010-403-040
87-A61-122-010
8A-NF8-604-010
8A-NF8-605-010
CAP,E 470-25 M SME
CAP,E 3.3-50 M 11L SME
CONN,11P V TID-A
PT,ANF-8 U<U>
PT,ANF-8 LH<LH>
!PT0002
!PT0002
!RY0001
!RY0002
!S0001
8A-NF8-661-010
8A-NF8-673-010
87-A91-339-010
87-A91-418-010
87-A90-165-010
PT,SUB ANF-8 (U)<U>
PT,SUB ANF-8 (H)KAMI<LH>
RELAY,AC DC12V G5PA-2<LH>
RELAY,AC12V G5PA-1-M<U>
SW,SL 1-2-3 SWS2301<LH>
!T0001
!T0002
87-A60-317-010
87-A60-317-010
TERMINAL, 1P MSC
TERMINAL, 1P MSC
CON351
DECK C.B
CHIP RESISTOR PART CODE
Chip Resistor Part Coding
8 8
A
Figure
Resistor Code
Value of resistor
Chip resistor
L
W
t
:A
Resistor Code : A
1.0
0.5
0.35
104
1.6
0.8
0.45
108
2
1.25
0.45
118
3.2
1.6
0.55
128
Dimensions (mm)
Wattage
1/16W
Type
1005
Tolerance
5%
Symbol
CJ
1/16W
1/10W
1608
2125
5%
5%
CJ
CJ
1/8W
3216
5%
CJ
Form
L
t
W
9
TRANSISTOR ILLUSTRATION
C
B
E
ECB
ECB
BCE
2SC3331
CD1585
CSA952
CSC4115
KTA1266
KTC3198
2SA933S
DTC114ES
KTC3199
2SB1370
D
G
S
SDG
2SJ460
2SK2541
2SJ461
2SK2158
10
2SA1235
2SC2714
2SC3052
CMBT5401
CMBT5551
KRA102S
KRA107S
KRC102S
RT1N441C
RT1P141C
FL (HNA-11MM30) GRID ASSIGNMENT/ANODE CONNECTION
GRID ASSIGNMENT
ANODE CONNECTION
11
12
WIRING-1 (MAIN C.B)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
B C E
B C E
B C E
C
D
E
F
G
H
J205
I
J
13
14
SCHEMATIC DIAGRAM-1 (FUNCTION/AM SECTION)
15
16
SCHEMATIC DIAGRAM-2 (TUNER SECTION)
17
18
SCHEMATIC DIAGRAM-3 (PT SECTION) <LH>
SCHEMATIC DIAGRAM-4 (PT SECTION) <U>
WIRING-2 (PT C.B) <LH>
WIRING-3 (PT C.B) <U>
1
2
3
4
5
6
7
1
A
A
B
B
C
C
D
D
E
E
F
F
19
2
3
4
20
5
6
7
SCHEMATIC DIAGRAM-5 (FRONT SECTION) <LH>
68k
21
22
WIRING-4 (FRONT C.B) <LH>
1
2
3
4
5
6
7
8
9
11
10
12
13
14
A
B
C
D
SW253
E
F
G
H
I
GEQ
J
TIMER
23
24
SCHEMATIC DIAGRAM-6 (FRONT SECTION) <U>
25
26
WIRING-5 (FRONT C.B) <U>
1
2
3
4
5
6
7
8
9
10
11
12
A
B
C
D
E
F
G
H
I
J
27
28
13
14
WIRING-6 (DECK C.B ) <LH>
3
4
5
6
7
1
A
A
B
B
C
C
D
D
E
E
F
F
G
G
H
H
I
I
J
J
29
2
3
4
TO MAIN C.B
CN301
TO FRONT C.B
CN 302
2
DECK C.B
1
WIRING-7 (DECK C.B ) <U>
30
5
7
6
TO MAIN C.B
CN351
IC BLOCK DIAGRAM
IC, LA1843
IC, LC72131D
31
IC, BU2092F
IC, BA3835F
IC, M61503FP
32
IC DESCRIPTION
IC, LC866548V-5P87 <U>, LC866548V-5P40 <LH>
Pin No.
Pin Name
I/O
Description
_______________
1
I-STEREO/I-DRF
I
Stereo detected input/CD DRF input
______
2
I-IFC/I-SUBQ
I
Tune IF count serial data input/CD SUBQ input
3
O-2PB
O
Deck 2 playback switch output
4
O-POWER
O
System power supply ON/OFF output
5
O-CD-ON
O
CD power ON/OFF output
6
O-PLL_DATA
O
LED driver, Tuner IC, Function IC data output
7
O-RMT
O
Deck 2 REC MUTE output
_______
_______
_________
_____
8
O-BIAS
O
Deck 2 bias ON/OFF output
9
O-MUTE
O
System mute ON/OFF output
O-STB
O
Latch strobe output for LED driver IC
_______
10
_________________
11
O-CLK_SFT
O
Micon clock shift output
12
RESET
I
System reset
13
NC
–
Not connected
14
I-DISH
I
CD turntable photo sensor A/D converter input
15
VSS1
–
GND
16
CF1
–
5.76 MHz oscillator circuit
17
CF2
–
5.76 MHz oscillator circuit
18
VDD1
–
Power supply input
__________
19
I-HOLD
I
Power failure detected input
20
I-KEY1
I
KEY input (A/D)
21
I-KEY2
I
KEY input (A/D)
22
I-KEY3
I
KEY input (A/D)
23
I-TU_SIG
I
Tuner signal input
24
I-CDSW
I
CD mechanical switch A/D converter input
25
I-SPEANA
I
A/D input for spectrum analyzer display
26
I-RE_VOL
I
Rotary encoder input (VOL)
27
I-WRQ/I-RDS_CLK
I
CD WRQ input/Tuner RDS clock input
28
I-TM_BASE
I
Reference clock input for timer watch
_________
29
I-RMC
I
System remotecontrol signal input
30 ~ 40
G11 ~ G1
O
FL GRID output G11 ~ G1
41
NC
–
Not connected
42 ~ 45
P35 ~ P32
O
FL SEGMENT output P35 ~ P32
46
VDD3
–
Power supply input
47 ~ 48
P31 ~ P30
O
FL SEGMENT output P31 ~ P30
49
P29/O-SPEANA-C
O
FL SEGMENT output P29/Spectrum analyzer band switching output
50
P28/O-SPEANA-B
O
FL SEGMENT output P28/Spectrum analyzer band switching output
51
VFL
–
Power supply input for FL display
52
P27/O-SPEANA-A
O
FL SEGMENT output P27/Spectrum analyzer band switch output
53
P26
O
FL SEGMENT output P26
54
P25/I-NO_CASINO
I/O
FL SEGMENT output P25/NO CASINO DEMO input to diode
55
P24/I-KARAOKE
I/O
FL SEGMENT output P24/KARAOKE input to diode
56
P23/NO_DEMO
I/O
FL SEGMENT output P23/NO DEMO input to diode
33
Pin No.
Pin Name
I/O
Description
57
P22/PRO LOGIC
I/O
FL SEGMENT output P22/PROLOGIC input to diode (not used)
58
P21/RDS
I/O
FL SEGMENT output P21/RDS input to diode
59
P20/FM1
I/O
FL SEGMENT output P20/FM1 input to diode
60
P19/SW
I/O
FL SEGMENT output P19/SW input to diode
61
P18/LW
I/O
FL SEGMENT output P18/LW input to diode
62
P17/AMST
I/O
FL SEGMENT output P17/AMST input to diode
63
P16/AM10K
I/O
FL SEGMENT output P16/AM10K input to diode
I/O
FL SEGMENT output P15/DECK2 cassette detect switch data input
I/O
FL SEGMENT output P14/DECK2 side-B record OK switch data input
I/O
FL SEGMENT output P13/DECK2 CAM switch signal input
I/O
FL SEGMENT output P12/DECK1 AUTO STOP signal input
I/O
FL SEGMENT output P11/DECK2 AUTO STOP signal input
I/O
FL SEGMENT output P10/DECK1 CAM switch data input
I/O
FL SEGMENT output P9/DECK1 cassette detect switch data input
FL SEGMENT output P8/DECK2 side A record OK switch data input
_________
64
P15/I-CST2
________
65
P14/I-REB
___________
66
P13/I-CAM2
____________
67
P12/I-AUTO1
_____________
68
P11/I-AUTO2
__________
69
P10/I-CAM1
_________
70
P9/I-CST1
________
71
P8/I-REA
I/O
72
VDD4
–
73
P7/I-REV2
I/O
FL SEGMENT output P7/DECK2 REVERSE mode input to diode
74
P6/I-REV1
I/O
FL SEGMENT output P6/DECK1 REVERSE mode input to diode
75
P5/NO_ECO
I/O
FL SEGMENT output P5/NO ECO MODE input to diode
76 ~ 79
P4 ~ P1
O
FL SEGMENT output P4 ~ P1
80
O-CD CLOSE
O
CD TRAY CLOSE data output
81
O-CD OPEN
O
CD TRAY OPEN data output
82
NC
–
Not connected
83
I-JOG_A
I
Rotary encoder A input (JOG)
84
I-JOG_B
I
Rotary encoder B input (JOG)
85
O-DISH_FWD
O
CD turntable forward rotation output
86
O-DISH_REV
O
CD turntble reverse rotation output
87
O-PLL_CE
O
PLL IC chip enable output
Power supply input
_____________
88
O-KSCAN
O
Switch SCAN timing output
89
VSS2
–
GND
90
VDD2
–
Power supply input
O
STAND BY LED (Echo mode) ouput
O
DECK MOTOR ON/OFF output
O
DECK1 soleroid ouput
_________
91
LED-STBY
______________
92
O-MOTOR
93
O-SOL1
_____
_________
_________
94
O-SOL2
O
DECK2 soleroid ouput
95
O-CD-DATA
O
CD DATA output
96
O-CD-LED
O
CD LED output
97
O-CD CLK
O
CD clock output
98
O-CD CE
O
CD chip enable output
99
I-RDS_DATA
I
RDS data input
100
O-PLL_CLK
O
PLL IC CLOCK output
34
ADJUSTMENT
6
7
MAIN C.B
1
7
L802
L801
12
IC801
SFR451 SFR452
TP4 (DC BALANCE)
TP3 (DC BALANCE)
L951
TP2 (CLK)
4
2. AM VT Check
Settings : • Test point : TP1 (VT)
Method : Set to AM 1710kHz, 530kHz and check that the test
point is less than 8.5V (1710kHz) and more than
0.6V (530kHz).
11. PB Sensitivity Check (DECK 1, DECK 2)
Settings : • Test tape : TTA–200
• Test point : TP8(Lch), TP9(Rch)
Method : Play back the test tape and check that the output
level of the test point is 140mV ± 3dB.
(3/3) (1/3)
TP8 (RCH)
GND
TP9 (LCH)
TP1 (VT)
2
3
FFE831
4
10. PB Frequency Response Check (DECK 1, DECK 2)
Settings : • Test tape : TTA–300
• Test point :TP8(Lch), TP9(Rch)
Method : Play back the 315Hz and 8kHz signals of the test
tape and check that the output ratio of the 8kHz
signal with respect to that of the 315Hz signal is
within 5dB.
< TUNER SECTION >
1. Clock frequency Check
Settings : • Test point : TP2
Method : Set to AM 1710kHz and check that the test point is
2160kHz ± 45Hz.
3. FM VT Check
Settings : • Test point : TP1 (VT)
Method : Set to FM 87.5MHz, 108.0MHz and check that the
test point is more than 0.5V (87.5MHz) and less
than 8.0V (108.0MHz).
12. REC/PB Frequency Response Adjustment (DECK 2)
Settings : • Test tape : TTA–602
• Test point : TP8(Lch), TP9(Rch)
• Input signal : 1kHz / 8kHz (LINE IN)
• Adjustment location : SFR451 (Lch)
SFR452 (Rch)
Method : Apply a 1kHz signal and REC mode. Then adjust
OSC attenuator so that the output level at the TP8,
TP9 becomes -20VU. Record and play back the
1kHz and 8kHz signals and adjust SFRs so that the
output of the 8kHz signals becomes 0dB ± 0.5dB
with respect to that of the 1kHz signal.
9
5 10
4. AM Tracking Adjustment
Settings : • Test point : TP8(Lch), TP9(Rch)
• Adjustment location :
L951(1/3) ...................................... 1000kHz
Method : Set to AM 1000kHz and adjust L951(1/3) so that
the level at the test point becomes maximum.
6 11
7 12
8 13
<U>
5. FM Tracking Check
Settings : • Test point : TP8(Lch), TP9(Rch)
Method : Set to FM 98.0MHz and check that the test point is
less than 9dBµV.
<LH>
DECK-1 P HEAD
DECK-2 R/P HEAD
DECK-1 P HEAD
DECK-2 R/P/E HEAD
DECK C.B
SFR1
11
11
FWD
REV
8
9
REV
14
FRONT C.B
FL401
R268
C326
30
+
GND
TP7
IC201
L331
1
14
9
FWD
13. REC/PB Sensitivity Check (DECK 2)
Settings : • Test tape : TTA–602
• Test point : TP8(Lch), TP9(Rch)
• Input signal : 1kHz (LINE IN)
Method : Apply a 1kHz signal and REC mode. Then adjust
OSC attenuator so that the output level at TP8, TP9
becomes 0VU. Record and play back the 1kHz
signals and check that the output is –2dB ± 3.0dB.
6. AM IF Adjustment
Settings : • Test point : TP8(Lch), TP9(Rch)
• Adjustment location :
L802 ............................................. 1000kHz
7. DC Balance / Mono Distortion Adjustment
Settings : • Test point : TP3, TP4 (DC Balance)
: TP8(Lch), TP9(Rch) (Distortion)
• Adjustment location : L801
• Input level : 60dBµV
Method : Set to FM 98.0MHz and adjust L801 so that the
voltage between TP3 and TP4 becomes 0V ± 0.3V.
Next, check that the distortion is less than 1.3%.
< FRONT SECTION >
14. µ-CON OSC Adjustment
Settings : • Test point : TP7 and GND
• Adjustment location : L331
Method : Insert AC plug while pressing POWER and TUNER
function keys. Adjust L331 so that the frequency at
the test point is 153.84Hz ± 0.15Hz.
< DECK SECTION >
8. Tape Speed Adjustment (DECK 2)
Settings : • Test tape : TTA–100
• Test point : TP8(Lch), TP9(Rch)
• Adjustment location : SFR1
Method : Play back the test tape and adjust SFR1 so that the
frequency counter reads 3000Hz ± 5Hz and ±45Hz
(REV) with respect to forward speed.
9. Head Azimuth Adjustment (DECK 1, DECK 2)
Settings : • Test tape : TTA–330
• Test point : TP8(Lch), TP9(Rch)
• Adjustment location : Head azimuth
adjustment screw
Method : Play back (FWD) the 8kHz signal of the test tape
and adjust screw so that the output becomes
maximum. Next, perform on REV PLAY mode.
35
36
MECHANICAL EXPLODED VIEW 1/1
39
A
A
AZG-1
A
40
18
A
19
HT-SINK
17
38
48
P.C.B
A
A
A
B
49
F
A 47
15
16
FL401
23
HT-SINK
37
20
WIRE,BINDER
41
A
50
F
A
14
21
22
P.C.B
C
B
A
28
13
25
24
27
A
26
H
A
A
9
30
P.C.B
29
E
31
5
G
A
HT-SINK
32
G
42
HT-SINK
I
A
44
H
8
43
3
11
34
12
PLATE,EARTH MIC
6
1
7
D
33
A
A
35
45
10
CHAS,MAIN
PLATE,EARTH MECH
2
A
9
35 33
36
2ZM-3 <LH>
ZZM-3 <U>
46
F
4
37
38
MECHANICAL MAIN PARTS LIST 1/1
REF. NO
PART NO.
1
2
3
3
4
KANRI
DESCRIPTION
NO.
8A-NFJ-012-010
WINDOW,CASS 1
8A-NFJ-013-010
WINDOW,CASS 2
8A-NFJ-002-010
BOX,CASS 1 U<U>
8A-NFJ-035-010
BOX,CASS 1H<LH>
8A-NFJ-003-010
BOX,CASS 2 U<U>
REF. NO
4
5
5
6
6
8A-NFJ-036-010
8A-NF8-207-010
82-NF5-218-010
8A-NF8-208-010
82-NF5-219-010
BOX,CASS 2H<LH>
SPR-T,EJECT 1<U>
SPR-T,EJECT 1(SIN)<LH>
SPR-T,EJECT 2<U>
SPR-T,EJECT 2(SIN)<LH>
30
31
31
32
33
KANRI
DESCRIPTION
NO.
88-913-301-110
FF-CABLE,13P-1.25
8A-NFJ-030-010
KEY,CD EDIT H<LH>
8A-NFJ-025-010
KEY,CD EDIT U<U>
8A-NFJ-027-010
KEY,DISC
86-NF9-224-010
SPR-C,LOCK
34
35
36
37
38
87-NF4-216-010
82-NF5-229-010
87-NF4-217-110
8A-NF8-206-010
87-064-185-010
HLDR,LOCK 1
PLATE,LOCK(*)
HLDR,LOCK 2
HLDR,PWB M
HLDR,WIRE PVC 0.5
7
8
9
9
10
8A-NFJ-005-010
8A-NFJ-017-010
8Z-NF6-210-010
8A-NF8-209-010
8A-NFJ-033-010
WINDOW,FR 2
KNOB,RTRY JOG
DMPR,150 N<LH>
OIL-DMPR,120<U>
CABI,FR H<LH>
39
40
40
41
42
84-ZG1-245-210
8A-NFJ-063-010
8A-NFJ-067-010
8A-DB8-209-010
87-NF4-221-010
CAP,OPTICAL
CABI,REAR LHSC<LH>
CABI,REAR USFD<U>
HLDR,PWB PT
HLDR,CABLE
10
11
11
12
13
8A-NFJ-001-010
8A-NFJ-004-010
8A-NFJ-006-010
8A-NFJ-026-010
8A-NFJ-039-010
CABI,FR U<U>
WINDOW,FR 1<U>
WINDOW,FR 1H<LH>
KNOB,RTRY MIC<LH>
WINDOW,DISP H<LH>
43
43
44
44
45
87-085-185-010
87-A91-422-010
87-A80-092-010
87-A80-110-010
8Z-NB8-240-010
BUSHING,AC CORD(E) CM-22B<LH>
BUSHING,AC CORD(U)<U>
AC CORD ASSY,E BLK SUN FAI<LH>
AC CORD ASSY,U SPT-2W<U>
COVER, PL
13
14
15
16
17
8A-NFJ-011-010
8A-NFJ-008-010
8A-NF8-007-010
8A-NF8-005-010
8A-NF8-006-010
WINDOW,DISP U<U>
WINDOW,CD
PANEL,LEFT V-2
PANEL,TOP
WINDOW,TOP
46
47
47
48
49
8A-NF8-008-010
8A-NF8-205-010
8A-NF8-216-010
88-906-251-110
87-NF6-615-010
PANEL,RIGHT V-2
HLDR,IC<U>
HLDR,IC C<LH>
FF-CABLE.6P 1.25
CONN ASSY,3P PB<LH>
18
19
20
21
22
8A-NFJ-009-010
8A-NFJ-010-010
88-NF8-205-010
8A-NFJ-018-010
8A-NFJ-016-010
PANEL,TRAY
WINDOW,TRAY
GUIDE,FL
KEY,FUN
REFLECTOR,FUN
49
50
50
A
B
86-ZM3-604-210
87-NF6-616-010
86-ZM3-605-110
87-067-703-010
87-NF4-224-010
CONN ASSY,3P PB<U>
CONN ASSY,8P RPB<LH>
CONN ASSY,8P -RPB<U>
BVT2+3-10 W/0 SL0T
S-SCREW,IT3B+3-8 CU
23
24
25
26
26
8A-NFJ-014-010
8A-NFJ-015-010
8A-NFJ-019-010
8A-NFJ-028-010
8A-NFJ-029-010
KEY,POWER
REFLECTOR,ECO
KEY,GEQ
KEY,ASSY OPE 1WAY<U>
KEY,ASSY OPE REV<LH>
C
D
E
F
G
87-067-581-010
87-067-688-010
87-723-096-410
87-067-641-010
87-078-191-010
BVT2+3-15 W/0 SL0T
BVTT+3-6
QT2+3-10 W/O SLOT BLK
UTT2+3-8 W/O SLOT BLK
S-SCREW,IT+4-10 SWCH12A
27
27
28
29
29
8A-NF8-202-010
8A-NF8-203-010
8A-NF8-201-010
88-911-101-110
88-915-101-110
GUIDE,OPE 1WAY<U>
GUIDE,OPE REV<LH>
GUIDE,FUN
FF-CABLE,11P 1.25<U>
FF-CABLE.15P 1.25 100MM<LH>
H 87-721-097-410
I 87-721-096-410
!
!
!
!
!
PART NO.
QT2+3-12 W/O SLOT
QT2+3-10 W/O SLOT
COLOR NAME TABLE
Basic color symbol
Color
Basic color symbol
Color
Basic color symbol
Color
B
Black
C
Cream
D
Orange
G
Green
H
Gray
L
Blue
LT
Transparent Blue
N
Gold
P
Pink
R
Red
S
Silver
ST
Titan Silver
T
Brown
V
Violet
W
White
WT
Transparent White
Y
Yellow
YT
Transparent Yellow
LM
Metallic Blue
LL
Light Blue
GT
Transparent Green
LD
Dark Blue
DT
Transparent Orange
GM
Metallic Green
YM
Metallic Yellow
DM
Metallic Orange
PT
Transparent Pink
39
MECHANISM MAIN PARTS LIST 1/1<LH: 2ZM-3MK2 YPR4NC>
REF. NO
PART NO.
KANRI
NO.
DESCRIPTION
1
2
3
4
5
82-ZM3-335-310
87-B10-043-010
86-ZM1-206-010
82-ZM1-322-010
82-ZM1-220-210
0E
0E
0E
0E
0E
PULLEY,COUPLER M3
W-P,0.99-4-0.25 SLT
BELT,MAIN L
SPR-T,FR 60
GEAR,IDLER
6
7
7
8
9
82-ZM3-616-010
82-ZM3-348-010
82-ZM1-341-210
82-ZM1-258-210
87-A90-821-110
0E
0E
1A
0E
1H
RING MAGNET 4
LEVER ASSY,PINCH YL<YPR4>
LVR ASSY,PINCH L2<PR4>
SPR-T,PINCH L
HEAD,RPH HADKH56 FPC
10
11
12
13
14
82-ZM3-342-010
82-ZM1-338-110
09-001-420-010
82-ZM3-333-310
82-ZM3-334-010
0E
0E
1A
1A
0E
BELT,SBU MOT 3
BELT,FR 4
FLY-WHL,R ASSY
SLIP DISK ASSY 2
PW 2.16-6-0.4
15
16
17
18
19
82-ZM3-306-110
82-ZM1-225-210
82-ZM3-305-310
82-ZM1-226-010
82-ZM1-216-510
0E
0E
0E
0E
0E
LVR,FR M2
GEAR,FR
GEAR,CAM M2(*)
GEAR,REW
GEAR,REEL
20
21
22
22
22
82-ZM1-227-310
82-ZM1-265-310
82-ZM1-245-210
82-ZM1-245-210
82-ZM3-351-010
0E
0E
0E
0E
0E
LVR,TRIG
SPR-E,TRIG
HLDR,IC <YPR4NF><YPR4NC>
HLDR,IC <PR4NF><PR4NC>
HLDR,IC 2 <YPR4NM><PR4NM>
23
23
24
25
26
82-ZM1-344-210
82-ZM3-343-010
82-ZM1-259-210
82-ZM1-234-310
82-ZM1-237-610
0E
0E
0E
1A
1A
LVR ASSY,PINCH R2<PR4>
LEVER ASSY,PINCH YR<YPR4>
SPR-T,PINCH R
FLY-WHL,L ASSY
FLY-WHL,R ASSY
27
28
29
30
31
82-ZM3-339-110
82-ZM1-255-310
82-ZM1-217-410
82-ZM1-285-410
82-ZM1-333-210
0E
0E
0E
0E
0E
SHAFT,COUPLER N3
SPR-E,LVR DIR
REEL TABLE
SPR-C,BT L
PLATE,LINK2
32
33
34
35
36
82-ZM1-222-310
82-ZM3-307-010
87-045-347-010
82-ZM1-257-010
82-ZM3-340-010
0E
0E
1H
0E
0E
LVR,PLAY(*)
CUSH-G,DIA3.7-8-3.2
MOT,SHU2L 70
SPR-T,CAS
SH,BELT D2
37
38
39
40
41
82-ZM1-242-010
82-ZM1-244-510
82-ZM1-243-010
82-ZM1-240-110
82-ZM1-264-010
0E
0E
0E
0E
0E
LVR,CAS
SPR-C,BT
LVR,STOP
LVR,REC(*)
LVR,EJECT R
42
42
43
44
45
82-ZM3-621-110
82-ZM3-627-010
82-ZM1-241-310
82-ZM1-208-310
87-A90-820-110
1B SOL ASSY 27 KO<YPR4>
— SOL ASSY 27 SO<PR4>
0E LVR,MC
0E HLDR,HEAD
1D HEAD,PH HADKH25 FPC
46
47
48
49
50
82-ZM1-314-110
82-ZM1-207-910
82-ZM3-353-010
82-ZM1-210-110
82-ZM1-219-110
0E
1A
0E
0E
0E
PLATE,HEAD
GUIDE,TAPE
SPR-T,HEAD 2
GEAR,H T
SPR-T,LINK
51
52
53
54
55
82-ZM1-269-210
82-ZM1-218-010
82-ZM1-206-910
82-ZM1-266-310
82-ZM1-214-010
0E
0E
1A
0E
0E
SPR-T,BRG
SPR-E,HB
CHAS,HEAD
LVR,DIR
SPR-T,DIR
56
57
58
59
60
82-ZM3-221-210
82-ZM3-301-610
80-ZM6-243-010
82-ZM3-329-410
82-ZM1-288-010
0E
1H
0E
0E
0E
PULLEY,MOT 2M
CHAS ASSY,M2
SH 1.75-3.6-0.5 SLT
BELT,SBU R2
SH,1.63-3.2-0.5 SLT
A
B
C
D
E
80-ZM6-207-010
86-ZM4-206-110
85-ZM3-202-010
82-ZM3-222-010
82-ZM3-318-110
0E
0E
0E
0E
0E
V+1.6-7
S-SCREW,AZIMUTH L
S-SCREW,TG
S-SCREW,SHILD PLATE
S-SCREW W,MOTOR M2
40
MECHANISM EXPLODED VIEW 1/1 <LH: 2ZM-3MK2 YPR4NC>
B
A
44
C
47
45
46
48
52
49
44
B
50
53
29
7
38
PWB
9
47
48
32
46
51
37
39
43
27
8
C
35
29
A
49
b
52
31
1
30
60
58
2
40
29
4
3
50
54
43
53
37
5
38
b
32
E
39
29
6
55
51
60
35
58
31
PLATE
40
a
30
SHLD,M3
a
54
36
57
D
23
23
55
41
PWB
24
19
15
24
7
18
8
20
GEAR
28
PLAY
13
17
25
19
21
42
4
14
15
16
18
PLAY
11
5
42
19
GEAR
28
YPR4NM,PR4NM
6
11
22
PLATE
13
22
SHLD,M3
D
59
12
10
56
14
25
33
26
33
16
17
20
21
PWB
34
41
42
MECHANISM EXPLODED VIEW 1/1 <U: ZZM-3 PR1NF>
TERMINAL,
LB1
33
A
34
44
55
A
43
36
41
46
51
TERMINAL,LB1
33
45
51
35
A
52
44
42
31
32
52
45
31
32
b
a
29
43
47
29
40
39
28
48
50
42
53
46
49
35
41
30
27
37
47
B
38
21
a
48
40
19
27
49
20
26
25
b
24
17
23
18
16
22
28
30
21
26
20
25
24
19
IC, EW732
23
18
22
IC, EW732
54
9
5
6
38
1
14
54
39
2
10
11
c
c
5
6
3
37
9
14
15
16
P.C.B
10
7
11
12
8
4
12
13
15
13
43
44
MECHANISM MAIN PARTS LIST 1/1<U: ZZM-3 PR1NF>
REF. NO
PART NO.
KANRI
NO.
DESCRIPTION
1
2
3
4
5
8Z-ZM3-227-010
8Z-ZM3-235-010
8Z-ZM1-235-010
87-045-347-010
8Z-ZM1-232-010
0E
0E
0E
1H
0E
6
7
8
9
10
8Z-ZM3-244-010
8Z-ZM3-256-010
8Z-ZM3-255-010
8Z-ZM3-231-010
8Z-ZM3-213-010
0E GEAR,CAM TD20
— FLY-WHL ASSY,M3 R
— FLY-WHL ASSY,M3 L
0E SPR-T,TRIG
0E CLR,MG
11
12
13
14
15
82-ZM3-616-010
8Z-ZM3-243-010
8Z-ZM3-238-010
8Z-ZM3-219-010
8Z-ZM3-206-010
0E
0E
0E
0E
0E
RING MAGNET 4
LEVER ASSY,HD UP
SPR-T,HD UP
GEAR,CAM M3
LEVER,TRIG
16
17
18
19
20
8Z-ZM3-209-010
8Z-ZM3-203-010
8Z-ZM1-228-010
8Z-ZM1-265-010
8Z-ZM1-227-010
0E
1H
0E
0E
0E
LEVER,CAM FR
CHAS ASSY,M3
GEAR,SLIP T-UP B
FELT,T-UP
GEAR,SLIP T-UP A
21
22
23
24
25
8Z-ZM1-251-110
8Z-ZM1-275-010
8Z-ZM1-257-010
8Z-ZM1-236-010
8Z-ZM3-226-010
0E
0E
0E
0E
0E
SPR-C,T-UP SLIP
W-L,1,47-4-0.25
SPR-C,F/R
CLR,SLIP FF/REW
SPR-C,FR M3
26
27
28
29
30
8Z-ZM3-250-010
8Z-ZM1-269-010
8Z-ZM1-238-110
8Z-ZM3-220-010
8Z-ZM3-205-010
0E
0E
0E
0E
0E
GEAR,SLIP F/R A M3
FELT,FF/REW 2
GEAR,SLIP FF/REW B 2
LEVER,FR M3
LEVER,PLAY M3
31
32
33
34
35
8Z-ZM3-233-010
84-ZM2-227-310
87-A90-403-110
87-A90-404-010
8Z-ZM3-239-010
0E
0E
1B
1B
0E
SPR-T,BRG M3
SPR-C,AZIMUTH
HEAD,RPH MS15R
HEAD,EH LE15B
SPR-E,FR
36
37
38
39
40
8Z-ZM3-211-010
8Z-ZM3-225-010
8Z-ZM3-221-010
8Z-ZM3-234-010
8Z-ZM3-223-010
0E
0E
0E
0E
0E
LEVER,EJECT R
LEVER,STOP
LEVER,CAS
SPR-T,LVR CAS
SPR-C,REEL R M3
41
42
43
44
45
8Z-ZM1-225-110
8Z-ZM3-240-010
8Z-ZM3-237-010
8Z-ZM3-215-010
8Z-ZM1-261-110
0E
0E
0E
0E
0E
GEAR,REEL R
SPR-T,T-UP M3
SPR-T,PINCH M3
LEVER,PINCH M3
ROLLER ASSY,PINCH
46
47
48
49
50
8Z-ZM1-226-010
8Z-ZM3-222-010
8Z-ZM3-251-010
8Z-ZM3-236-010
82-ZM1-240-110
0E
0E
0E
0E
0E
GEAR,REEL L
SPR-C,REEL L M3
GEAR,IDL REW M3
SPR-T,PLAY M3
LVR,REC(*)
51
52
53
54
55
8Z-ZM3-216-010
87-B10-301-010
8Z-ZM3-212-010
8Z-ZM3-214-010
86-ZM3-605-110
0E
0E
0E
0E
1B
LEVER,T-UP M3
W-L,1.63-3.2-05 SLIT
LEVER,EJECT L
HLDR,IC
CONN ASSY,8P -RPB
A
B
BELT,MAIN M3
BELT,MAIN L
PULLEY,MOT
MOT,SHU2L 70
GEAR,IDL FF/REW
84-ZM2-242-010 0E S-SCREW,AZ1-2-6.4
8Z-ZM2-220-110 0E V+2.6 ZZM-2
45
SPEAKER DISASSEMBLY INSTRUCTIONS
Type.4
Type.1
Insert a flat-bladed screwdriver into the position indicated by the
arrows and remove the panel. Remove the screws of each speaker
unit and then remove the speaker units.
TOOLS
1 Plastic head hammer
2 ( – ) flat head screwdriver
3 Cut chisel
1
2
3
How to Remove the PANEL, FR
Type.2
1. Insert the ( – ) flat head screwdriver tip into the gap
between the PANEL, FR and the PANEL, SPKR. Tap the
head of the ( – ) flat head screwdriver with the plastic
hammer head, and create the clearance as shown in Fig-1.
Remove the grill frame and four pieces of rubber caps by pulling
out with a flat-bladed screwdriver. Remove the screws from hole
where installed rubber caps. Insert a flat-bladed screwdriver into
the position indicated by the arrows and remove the panel. Remove the screws of each speaker unit and then remove the
speaker units.
2.
Insert the cut chisel in the clearance, and tap the head of
the cut chisel with plastic hammer as shown in Fig-2, to
remove the PANEL, FR.
3. Place the speaker horizontally. Tap head of the cut chisel
with plastic hammer as shown in Fig-3, and remove the
PANEL, FR completely.
Type.3
Insert a flat-bladed screwdriver into the position indicated by the
arrows and remove the panel. Turn the speaker unit to counterclockwisedirection while inserting a flat-bladed screwdriver into
one of the hollows around speaker unit, and then remove the
speaker unit. After replacing the speaker unit, install it turning to
clockwise direction until "click" sound comes out.
Fig-1
Fig-2
Fig-3
How to Attach the PANEL, FR
Attach the PANEL, FR to the PANEL, SPKR. Tap the four
corners of the PANEL, FR with the plastic hammer to fit the
PANEL, FR into the PANEL, SPKR completely.
46
SPEAKER PARTS LIST (SX–WNBL53) <LH>
REF. NO
PART NO.
KANRI
NO.
DESCRIPTION
1
1
2
3
4
8A-NS5-001-010
8A-NS5-016-010
8A-NS5-017-010
8A-NS5-004-010
8A-NS5-009-010
PANEL,FR<YL>
PANEL,FR U<YS>
PLATE,NAME B
PANEL,DUCT
PROTECTOR,
5
5
6
7
8
8A-NS5-005-010
8A-NS5-012-010
8A-NS5-015-010
8Z-NSY-003-010
88-NS3-029-010
GRILLE,FRAME ASSY<YL>
GRILLE,FRAME ASSY U<YS>
BADGE,AIWA S35
CORD,BUSH
CORD,BUSH L
9
10
11
12
13
88-NS5-610-010
88-NS5-611-010
8Z-NSY-608-010
8A-NS8-604-010
8Z-NS7-602-010
CORD,SPKR
CORD,SPKR B/L
SPKR, CERAMIC ASSY
SPKR, M 100
SPKR, W 160
SPEAKER PARTS LIST (SX–WNAJ53) <U>
REF. NO
PART NO.
KANRI
NO.
DESCRIPTION
1
2
3
4
5
8A-NS5-016-010
8A-NS5-017-010
8A-NS5-004-010
8A-NS5-009-010
8A-NS5-012-010
PANEL,FR U
PLATE,NAME B
PANEL,DUCT
PROTECTOR,
GRILLE,FRAME ASSY U
6
7
8
9
10
8A-NS5-015-010
8Z-NSY-003-010
88-NS3-029-010
88-NS5-610-010
88-NS5-611-010
BADGE,AIWA S35
CORD,BUSH
CORD,BUSH L
CORD,SPKR
CORD,SPKR B/L
11 8Z-NSY-608-010
12 8A-NS8-604-010
13 8Z-NS7-602-010
SPKR, CERAMIC ASSY
SPKR, M 100
SPKR, W 160
47
2–11, IKENOHATA 1–CHOME, TAITO-KU, TOKYO 110, JAPAN TEL:03 (3827) 3111
920074
Printed in Singapore
Download PDF