Instruction ManualET-2 12

EASY CONNECT®
TING & FANS
LIGH
IR A
RS
EC
LA
INSTALLATION INSTRUCTIONS
G E S & VE N T I L A T
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-265-1833 (English) • 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
EU
“INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS”
“READ ALL INSTRUCTIONS”
!
“IMPORTANT SAFETY
INSTRUCTIONS”
“SAVE THESE INSTRUCTIONS”
INSTALL EASY CONNECT MOUNTING BRACKET:
STEP 1
N
Easy Connect
mounting
bracket
L
Black (Live)
Attach easy connect
mounting bracket
to electrical box with
electrical box screws
(not included).
1.TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF
LIGHT FIXTURE.
2.THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
NOTE: Product May Not Look Exactly As Shown In Figures.
STYLE #2
STYLE #1
White
(Neutral)
L
Green (Ground)
CONNECT HOUSE WIRES
STEP 2 - Option 1
(N)
White
(Neutral)
(L)
Black
(Live)
L
Option 2 - MULTIPLE ELECTRICAL BOX WIRES
Jumper Wire
Connect (push) electrical
wires from electric box
(house wiring) into correct
inserts. Black (Live),
White (Neutral),
Green (Ground)
N
N
Green
(Ground)
SAFETY PRECAUTIONS:
N
Electrical
Box
ET-2
12/12
Green
(Ground)
(N)
White
(Neutral)
L
(L)
Black (Live)
Jumper
Wire
For multiple black (live) &
white (neutral) wires joined
in the electrical box
(house wiring), attach a single
“black” and “white” Jumper Wire
before connecting. Strip 7mm
from a 6” Jumper Wires (AWG 12-24)
supplied. Then connect (push) wires
into correct inserts.
CONNECT LIGHT FIXTURE
STEP 3
(N)
White
(Neutral)
(L)
Black
(Live)
Connect (push) electrical wires from fixture into correct inserts.
Black (live), White (neutral), Green (ground)
L
N
Light
Fixture
Green
(Ground)
STEP 4
STYLE#1
Stud
Or
Nipple
Fixture
Cap
Nut
Star
Washer
STYLE#1- Tuck electrical wires into
outlet box and position fixture over
studs or nipple on mounting bracket
assembly. Secure fixture in place with
star washer(s) and cap nut(s).
Note: If required, assemble body and
spread the arms of the fixture out
evenly.
STYLE#2
Screw
Fixture
STYLE #2 - Insert one screw into the
mounting bracket - do not tighten
yet. Tuck electrical wires into outlet
box and position fixture over the
mounting bracket. Line up the screw
in the bracket to the "7" hole on the
fixture. Slide fixture to secure in place.
Insert remaining screw. Tighten both
screws to secure.
Bracket
STEP 5 - Optional for some models (Note: Refer to the style of assembly that matches the style of your fixture.)
STYLE#1
“Pop Off”
Head Or
Glass
Style#1 - Snap “pop off” head or
glass onto fixture (push, or push
and turn (it depends on the style
of your fixture)). Install proper bulb
Fixture type and wattage.
Socket
STYLE#2
Fixture Head
Decorative
Ring
Style#2 - Install proper bulb
type and wattage. Install
decorative ring.
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: (613) 342-5424, Fax: (800) 263-4598