i-PRO Management Software WV-ASM200 Series Security & AV Systems Business Unit Panasonic System Networks Company 2 What is WV-ASM200 series? WV-ASM200 series is designed for integrated management, control, live image display and playback of recorded images for multiple Panasonic network disk recorders* and digital disk recorders.** More efficient operation and management are possible by using an operation window, a map window *** and a live window*** at a time when three monitors are used with a PC. * WJ-NV200, WJ-ND400, WJ-ND300A, WJ-ND200. ** WJ-HD716/616 and WJ-HD316A/HD309A. *** Extension software “WV-ASE201” is required in addition to “WV-ASM200”. System diagram WJ-HD316A/HD309A WJ-HD716 /HD 616 WJ-ND400 WJ-ND300A WJ-NV200 WJ-ND200 WV-ASM200 Series Operation Window Map Window Network i-Pro series network camera Management, Live/Playback ctrl, Search, Download PTZ ctrl, Live view 1 Cameras are registered on network recorders 2 Recorders are connected by a single port configuration. Cameras can be directly viewed. (i-Pro series cameras) PC WV-ASM200 Series Live Window 3 WV-ASM200 Product Line up and functions Extension Software n .... Product Additional Extension Software* (Future) Extension Software 4 : Extension Software 3 Extension Software 2 Extension Software 1 Basic Function Extension WV-ASM100 Live Window Full MAP Window CU950 Controller WV-ASM100L Light Software* WV-ASE201 WV-ASM200 Live Window MAP Window CU950 controller Additional Features from ASM100L + 16:9 Stream & HD monitor support + File Conversion + Internet Mode (Camera) + NV200, ND400 Smooth Playback** + SDHC H.264 Download ASM100 Series ASM200 Series Functions *To use functions of extension software such as WV-ASE201, WV-ASM200 is required as base software. ** NV200 ver. 1.2 or later, ND400 ver. 2.5 or later are required. 4 WV-ASM200 Series Major Features (1) Multi-monitor function (Up to 3 monitors)* The multi-monitor function using up to three PC monitors is available, and it enables surveillance operation more efficient. (2) Map window* It is possible to display live images from a camera by clicking the respective camera’s icon on the map. (3) Multi-screen Live window* It is possible to display multi-screen live images to handle large bit rate** such as 1.5Mbps (VGA 30 ips) x 16 cameras for H.264, 2 Mbps (VGA 30 ips) x 16 cameras for MPEG-4. (4) The number of registration of recorders Up to 100 recorders can be registered. (5) Camera / Encoder direct control and display Cameras registered at a recorder can be viewed not only viewed via the recorder but also by direct access to the cameras from ASM200. (6) Other remarkable features Alarm notification by Panasonic alarm protocol. Up to 20 screens can be displayed for the operation window and the Live window. Operation using the system controller WV-CU950* * Extension Software WV-ASE201 is required in addition to WV-ASM200. ** This is possible when a recommended PC with enough performance is used. 5 WV-ASM200 Series Major Features (7) Supporting 16:9 Full HD, Wide monitor (New) The display area of images can be set as 16:9 so that the 16:9 resolution images are displayed. (8) Supporting the Internet mode (New) The streams of the Internet mode (H.264/MPEG-4) from cameras and recorders are handled. (9) Conversion of a n3r file to a standard format file. (New) It is possible to convert a .n3r file to an mp4 file that is standard of Windows. The converted file can be played back by QuickTime, Widows Media Player (Only Windows 7) and so on. (10) Downloading recorded images of a camera’s SD card (New) It is possible to download an H.264 file on a SD memory card of a camera to a PC. (11) High-speed playback smooth mode (New) Full frame playback is possible for STEP2 and STEP3 of high-speed playback. (12) Loading WV-ASM100 series setup data The setup data of WV-ASM100/100L can be loaded to WV-ASM200 for migration. 6 WV-ASM200 Series Multi-monitor function There is a multi-monitor function using up to three PC monitors to display the operation window, the live window* and the map window* simultaneously on each monitor. It is also possible to display the operation window, the live window* and the map window* overlapped on one or two PC monitors. Operation window •Selection displayed camera •Camera control •Recorder control (Recording, Playback) •Switching screens (multi-screen, sequence) Map window* • Camera switch to be displayed by clicking an icon on a map. • Switch a map. • Display an alarm camera changing the icon with blinking and red color. • Search and download * Extension Software WV-ASE201 is required in addition to WV-ASM200. Live window* • Live display for a group by group (1, 4, 9, 16 screens) • Sequential live display (Mixture of 1, 4, 9 ,16 screens is possible) WV-ASM200 Series Multi-monitor Display Operation 7 Display sample Single Display 1 PC monitor (Not use the live window) Configuration When using a single PC monitor, Operation with the operation window and the map window* without using the live window is suitable. Set the value of the maximum screens of Live window to “--”. Dual Display** Triple Display** 2 PC monitors (Use the live window) <When using two PC monitors> Operation while displaying the operation window and the map window on one of the two PC monitors and the live window on the other PC monitor is suitable. The number of screens of the operation window and live window can be changed. 3 PC monitors (Use the live window) <When using three PC monitors> Operation while displaying the operation window, the live window and the map window on each of three PC monitors is suitable. The number of screens of the operation window and live window can be changed. * Extension Software WV-ASE201 is required in addition to WV-ASM200 when the map window is used. ** Extension Software WV-ASE201 is required in addition to WV-ASM200. 8 The number of screens of the windows The number of screens of the operation window and the live window* can be arbitrarily set as far as the total number of screens is 20 or less than 20. Operation Window Live Window* Maximum number of screens 1 screen [Setup Software] => [System] Maximum number of the screens of the operation window Select 1/4/9/16-screen 1 screen Maximum number of the screens of the live window Select 1/4/9/16-screen ＋ Total has to be 20 or less than 20. The number of the screens of the Operation window and the Live window has to be 20 or less than 20. * Extension Software WV-ASE201 is required in addition to WV-ASM200. 9 WV-ASM200 Series Operation window Tool Tool bar bar Status Status bar bar The shortcut icons of the menu items are shown [Functions] Save still image/ print/ Logout/ 1-16 screen display/ Full screen display/ Search/ Format transformation Image Image display display area area SD SD operation operation panel panel ・Display SD list ・Download Menu Menu panel panel ・Show registered recorders and cameras ・Display images by a registered group • Sequence operation •Playback operation by Easy playback panel •Playback from search panel •Download images •Show alarm logs •Show error logs •Show NW error logs Camera Camera operation operation panel panel •Pan/tilt •Zoom •Focus •Auto mode •Camera operation by control pad •Brightness •Preset •AUX Playback Playback operation operation panel panel On the status bar. • Recorder camera name • Alarm button • Error button • Presence or absence of SD memory data in the SD memory card • Live/Rec/Playback button • Time and date 10 WV-ASM200 Series Map window* Map Map selection selection Select the desired map from the drop-down list. (Up to 20 maps can be used among up to 100 registered maps.) Map Map icon icon When a map icon displayed on the map is clicked, the respective map will be displayed on the map window. Camera Camera icon icon Actions at alarm input 1. A map is switch to the map where the camera that sent an alarm, is plotted. (When Alarm setting is auto map switch : ON) 2. Corresponding camera icon starts blinking. When the camera icon on the map is clicked, live images from the selected camera will be displayed in the selected area on the operation window. Up to 64 cameras’ icons can be plotted. A pop-up menu appears by right click, then it is possible to switch open/close status of a device connected to the AUX terminal from the submenu. * Extension Software WV-ASE201 is required in addition to WV-ASM200. Map Map display display area area 11 WV-ASM200 Series Live window* Group Group information information display display area area Camera Camera information information Display Display area area * Extension Software WV-ASE201 is required in addition to WV-ASM200. 12 WV-ASM200 Series License Key Activation (No dongle) WV-ASM200 Series changes the activation way from Dongle, HASP key, to Software License Key. ASM100 Series ASM200 Series Key Management System ＨＡＳＰ Key Internet Software install Activate by registration of “Registration key” issued by Key management System Activate by HASP key connection Activation Key Card Activate Software Activate Software Software install 13 License registration for the demo edition Before getting an official license/licenses, ASM200 Series can be used as 90 days demo edition free of charge by registering the registration key for demo edition. The user can continue to use ASM200 Series by purchasing an official license/ Licenses, and registering the official registration key(s) within 90 days. Registration Key for demo edition WV-ASM200: 0000-0010-0000-0001 WV-ASE201: 0000-0030-0000-0001 When ASM200 is running as demo edition mode, the following message appears every one hour. 14 Registering cameras and encoders to WV-ASM200 Series Cameras Cameras 1 a. a. Registering Registering network network recorders recorders WV series cameras Camera information registration Images come directly from cameras. Streams are received directly from cameras for live view. Device information registration Playback Live images recorder SW 2 WV-ASM200 series • The above is to register NWDR(s) to WV-ASM200 Series. The information of cameras and encoders is handed over to WVASM200 series. When there are many cameras to be registered, this is very efficient way. • There are two ways how the images from cameras are received. They are shown in the right figures and one of them is selected* * In the case of BB/BL model cameras, only second way (No2 in the right figure) is possible. Cameras WV-ASM200 Series Images come through recorders. Streams are received through recorders for live view and playback. WV and BB/BL Series cameras Playback Live images WV-ASM200 series b. b. Registering Registering cameras cameras independently independently from from recorders recorders 3 Cameras WV series cameras This is the way to register cameras and encoders to SW WV-ASM200 Series independently from a recorder. ASM200 Series Device information registration 15 The number of PCs to be connected to recorders The maximum number of PCs that can be connected to a recorder depends on types of connected recorders and usage of the live monitor. Recorder Connected PCs Live Monitor is used Live Monitor is not used ND300 series 4 6 ND200 2 4 HD316A, HD309A 2* 3** ND400 8 16 HD616/HD716 4 8 NV200 1 2*** * If 16 or 9-screen display is done, the number of PC that can be connected becomes 1. ** If 16-screen display is done, the number of PCs that can be connected becomes 2. *** In this case, the total number of screens displayed on 2 PCs is limited depending on NV200’s throughput (Max: approximate 110 Mbps). If the total bit rate of NV200 is over the throughput limit, some phenomenon such as slowing down of displaying images may happen. 16 Compatible firmware version for connected devices ■ Recorders’ firmware versions that can be compatible with WV-ASM200 Series* Product Number WJ-ND300 WJ-ND300A WJ-ND200 Firmware version Ver 5.20 or later Compression format M-JPEG H.264 MPEG-4 Ver 3.30 or later M-JPEG H.264 MPEG-4 WJ-HD300A series (HD316A, HD309A) WJ-ND400 Ver 3.44 or later Ver 2.20 or later Proprietary format M-JPEG H.264 MPEG-4 WJ-HD616 WJ-HD716 WJ-NV200 Ver 2.06 or later H.264 Ver 1.04 or later M-JPEG H.264 MPEG-4 * WJ-RT416, WJ-HD300 series are not supported. 17 Compatible firmware version for connected devices ■ Cameras’ firmware versions that can be set as WV-ASM200 Series direct access. Product Number Firmware version WV-NP502 Ver 1.30 or later WV-NW502 Ver 1.30 or later WV-SP302 Ver 1.30 or later WV-SP305 Ver 1.30 or later WV-SP306 Ver 1.30 or later WV-SF332 /SF342 Ver 1.30 or later WV-SF335 Ver 1.30 or later WV-SF336/SF346 Ver 1.30 or later WV-SP102/SP105 Ver 1.31 or later WV-SC385 Ver 1.06 or later WV-SW395 Ver 1.06 or later WV-SC384 Ver 1.03 or later WV-SW352/SW355 Ver 1.04 or later WV-GXE500 Ver 1.30 or later Compression format H.264 MPEG-4 M-JPEG * As far as the same functions are used, new cameras can be supported by capability function. 18 Compatible firmware version for connected devices ■ Cameras’ firmware versions that can be set as WV-ASM200 series direct access. Product Number Firmware version WV-NP244 Ver 1.80 or later WV-NP1000/1004 Ver 1.25 or later WV-NS202 Ver 1.11 or later WV-NS202A Ver 2.70 or later WV-NF284 Ver 1.60 or later WV-NW484 Ver 1.61or later WV-NS950/NS954 Ver 1.61 or later WV-NW960/NW964 Ver 1.61 or later WV-NP304 Ver 1.61 or later WV-NF302 Ver 1.61 or later WV-NT304 Ver 1.32 or later WV-NT314 Ver 1.32or later Compression format MPEG-4 M-JPEG 19 Required Specification for PC OS OS Microsoft® Windows® 7 Professional SP1 32-bit Microsoft® Windows® 7 Professional SP1 64-bit Microsoft® Windows Vista® Business SP2 32-bit Microsoft® Windows Vista® Business SP2 64-bit * Windows XP isn’t supported. OS OS Language Language English, French, Spanish, German, Italian, Russian, Chinese (Simplified Chinese), Japanese Computer Computer CPU CPU Memory Memory Display Display Network Network IBM PC/AT Compatible Intel® CoreTM i5-2400, 2500 Intel® CoreTM i7-860 or higher spec. 3GB or more 1280x800 pixels or more, True color 24 bits or more 100/1000 Mbps Network Interface Card 20 Camera bit rate for recommended PCs Recommended Recommended camera camera bit bit rate rate for for aa recommended recommended CPU CPU model model when when H.264 H.264 is is used. used. Image size : VGA, Transmission Priority is “Frame rate” PC’s CPU Intel® CoreTM i5-2400 Recommended bit rate per 1 camera 768kbps(30fps) * except NP502 and NW502 1,024kbps(30fps) ** NP502 and NW502 Recommended Recommended camera camera bit bit rate rate for for aa recommended recommended CPU CPU model model when when MPEG-4 MPEG-4 is is used. used. Image size : VGA, Image quality : Normal PC’s CPU Intel® CoreTM i5-2400 Recommended bit rate per 1 camera 2,048kbps(30 fps) 21 Resolutions supported by WV-ASM200 Supported Not supported Aspect Ratio 4:3 2048x1536(QXGA) 1280x960(SXVGA) 800x600(SVGA) 640x480(VGA) 320x240(QVGA) - Aspect Ratio 16:9 1920x1080 1280x720 640x360 320x180 - Other resolutions - D1(720x480：NTSC) D1(720x576：PAL) Remarks: In the above table, there are some resolutions in “not supported” cells that can be displayed. However, lower display performance, distortion of aspect ratio or some problems might occur. 22 Multi-monitor function* WV-ASM200 has multi-monitor functions. The operation window, the live window* and the map window* are simultaneously displayed on up to three monitors. Operation Window Live Window* Map Window* It is necessary to add a graphics board to the PC to use the multi-monitor function. * Extension Software WV-ASE201 is required in addition to WV-ASM200. 23 Operation Window’s structure Operation Window Menu Bar Tool Bar Status Bar Information display area Function Panel Image display area Operation Panel 24 Screen Display Patterns The following screen patterns can be displayed on the operation window and the live window. • Multi-screen display (1,4,9,16 screens) • Full screen display 25 Displaying images with different aspect ratio ASM200 Series keeps the same aspect ratio of the streams from cameras and mixture of 16:9 and 4:3 screens in a window is possible. The Operation window and the Live window can display the following display patterns without changing the aspect ratio of each image. •Multi screen display (1 screen, 4 screen, 9 screen, 16 screen) Setting Image display •Full screen area (Selection) -Aspect ratio -Scaling (Images are enlarged or reduced in the whole of image area.) *The aspect ratio of images from WJ-HD300A series can’t be kept. All are displayed with enlargement or reduction. 4 screen When Aspect ratio is selected Full screen 26 Displaying images by scaling When “scaling” is selected at image display area setting, images are djusted by being enlarged or reduced to fit in each screen area. The following display pattern are available. • Multi-screen display (1 screen, 4 screen, 9 screen, 16 screen) • Full screen * When all the 4:3 aspect images are displayed at non HD monitor (4:3 resolution), The same pattern display with ASM100 can be done by selecting “scaling”. 4 screen When Scaling is selected Full screen 27 Display function - Reference - There are cases that the window may have black areas or distorted images due to the difference of the aspect ratio of a monitor and that of images. Image of aspect ratio 16:9 Image of aspect ratio 4:3 Aspect ratio of a monitor 4:3 Keep aspect ratio Aspect ratio of images 16:9 （16:10） Scaling Keep aspect ratio Scaling 4:3 Black areas at right, left, up and down. Black areas at right and left. 16:9 Black areas at up and down. Distorted vertically. Distorted horizontally. 28 Group Display Register frequently viewed cameras in a group, and it becomes easier to display the desired cameras’ images quickly by selecting the group. Operation Window “group” can be registered from Function panel’s group. Registered groups are shown. They are icons and group names. Clicking one of them, images in the group are displayed. 1 screen icon 9 screen icon 4 screen icon 16 screen icon Live Window A pop-up menu is displayed by right clicking. Select a group in the group name list from sub-menu to display the images in the image display area. 29 Sequence Display Images from the registered groups can be displayed on a full screen in a automatic sequential manner. •Select the "Sequence" bar on the function panel. ・・・ Group 1 Group 2 Group 3 Registration of sequence display is done in advance by WV-ASM200 setup software. 30 Switch the pattern of the screen The screen pattern can be selected among 1, 4, 9, 16 screen. Live images from cameras and recorders can be displayed in a selected screen pattern. This operation can be done only by the operation window. 31 Camera Control Camera control can be done such as adjustment of display position, zooming and focusing by operating the camera during live display. *1 Pan/Tilt *2 Zoom Focus Brightness Preset *2 : Adjust the camera position horizontally or vertically. : The camera images expand or they are reduced. : The focus of the camera images are adjusted. : The diaphragm of the lens is adjusted. : Select a preset number from the following. When the [Program] button is clicked after selecting a preset number, the current position will be registered as the preset position of the selected preset position number. Auto mode AUX : Selected auto mode function is activated. : The device that is connected to the AUX terminal is open or closed. *1 There is a case that the operation can not be done depending types of camera. *2 This can work for PTZ dome cameras. 32 SD memory card operation ASM200 can download H.264 videos (MP4) saved in SD/SDHC card of network cameras*. Viewer Software such as QuickTime, WMP (Only Windows 7) can playback the downloaded data. The cameras have to be registered by camera registration (not via a recorder) to use this function. * Only H.264 i-PRO SmartHD cameras When displaying live view of the camera registered independently from a recorder, the following operation panel is shown at the operation window. 1. Click “List” button 3. Select records and Click “Download” 2. Select “Alarm data” or “Manual/Schedule data” 33 Internet mode Support ASM200 can receive live images from both cameras directly and recorders via the Internet. *ASM100 ver8.0 can receive live image only from Recorders via internet WJ-HD616/716 (Ver.2.04 or later) WJ-ND400 (Ver.2.40 or later) WJ-NV200 (Ver.1.04 or later) live image from Recorder Over HTTP Internet IP cameras (SmartHD camera only) live image from Camera Over HTTP ASM200 Series ASM100 Ver8.0 34 Internet mode Support for recorders When H.264 or MPEG-4 live video and audio are received via the Internet, the HTTP port is used instead of the UDP port. Supported Recorder Version Remarks ND400 2.4 or later NV200 1.04 or later HD716/616 2.04 or later Whether or not the internet mode of the recorder is “ON”, ASM200 can receive video and audio streams of H.264 or MPEG4 by HTTP as far as the Internet mode is “ON” at ASM200. No recorder setting change is required. In this case, the all live image sources change to via recorder. Internet mode “ON” or “OFF” * In case if the firmware version is older than the required version, this button becomes gray out. 35 Internet mode Support for cameras Supported cameras Version WV-NP502 Ver. 1.30 or later WV-NW502 Ver. 1.30 or later WV-SP302 Ver. 1.30 or later WV-SP305 Ver. 1.30 or later WV-SP306 Ver. 1.30 or later WV-SF332/342 Ver. 1.30 or later WV-SF335 Ver. 1.30 or later WV-SF336/346 Ver. 1.30 or later WV-SP102/105 Ver. 1.30 or later WV-GXE500 Ver. 1.30 or later WV-SC385 Ver. 1.06 or later WV-SW395 Ver. 1.06 or later WV-SC384 Ver. 1.03 or later WV-SW355/352 Ver. 1.04 or later Remarks When the camera setting isn’t Internet mode, ASM200 Series changes it to the Internet mode. Changing the setting of the camera isn’t required. Internet mode ON/OFF * In case if a camera doesn’t support the Internet mode, the button becomes gray out. Camera setting has to be changed to the Internet mode by camera set up menu.* *This camera setting won’t be required from the next version upgraded by the firmware in fall 2011. 36 Audio Bi-directional audio transmission between the camera sites and PC (WVASM200 Series) can be done Camera to PC WV-ASM200 series PC to Camera WV-ND400 WJ-ND300/300A WV-ND200 Playback recorded audio WV-HD316A Playback audio after download Image Source WJ-ND400 Audio camera to PC *2 Audio PC to camera*1 Playback recorded audio Playback audio after download From the recorder YES NO YES YES From the camera YES YES*3 YES YES WJ-ND300/ 300A From the recorder NO NO NO NO From the camera YES YES*3 NO NO WJ-ND200 From the recorder NO NO YES YES From the camera YES YES*3 YES YES WJ-HD616/716 YES NO YES YES WJ-HD316A NO NO NO YES Camera Direct YES YES*3 － － *1 When Multicasting is used for the transmission, only one way of “camera to PC” is available. *2 The camera needs to have an audio function. *3 The camera needs to have a bidirectional audio function. * In order to use this function, audio transmission/receiving has to be enabled at camera setting. 37 Audio setup on WV-ASM200 Series Audio ON / OFF Audio icons are displayed on the operation window. Microphone is “ON” (transmission from a PC to a camera) Speaker is “ON” (Transmission from a camera to a PC) Upper side of the operation window Setup Software’s system tab 38 Playback Playing back recorded images can be done by WV-ASM200 Series • • Single screen playback Multi-screen playback 39 High-Speed Playback Smooth mode ASM200 Series supports WJ-ND400/NV200 Smooth Playback to avoid skipping important scenes. Step 2 Step 3 Step 4-7 ASM100 Series 4 times speed I frame only 8 times speed I frame only 16, 32, 64, 96 I frame only ASM200 Series 2 times speed I frame + P frame 4 times speed I frame + P frame 8, 16, 32, 48 I frame only (*Increase the number of I frame for smooth playback so that smoother playback is possible compared to ASM100 Series.) * ND400 V2.5 or later needed ** NV200 V1.20 or later needed *** Available on 1 or 4 split screen **** To use this function, more bandwidth is used than before. Consider the bandwidth availability of the network and ND400’s output stream. 40 Search Search the desired images from recoded video images. 1. Event Search The following 9 types of events can be searched for each unit of a recorder, a group or a map. 1. manual 2. Schedule 3. Emergency 4. Site alarm 5. Terminal alarm 6. Command alarm 7. VMD 8. Video loss 9. SD Memory In addition, in the case of the system that consists of SD5 cameras and WJ-HD616/716, the following i-VMD search are possible. 10. Terminal alarm 11. Object removal/abandonment 12. intrusion direction 13. Scene change detection 14. Motion detection 15. Loitering detection 2. Playback VMD Search Search date and time when the images have motions from a recorder. This is supported for WJ-ND400, WJ-NV200 and WJ-HD616/716. To do this, VMD information addition has to be “ON” for i-Pro series camera’s setup. (This is not applicable for WV-NP1000/NP1004 and BB/BL series cameras.) 41 Playback VMD Search This function is available only for WJ-ND400, WJ-NV200 and WJ-HD616/716 Click Search button Display images Make whole areas as the motion detection area Select a recorder and a camera Set search period The search result are shown in list form here. The way to display the result is the same as the event search. Specify frames for motion detection by 320 x 240 dots. Start search Playback VMD search can be done only for the recorded images whose aspect ratio is 4:3. When the images’ aspect ratio is 16:9, this can’t be used. The search result always becomes no record for the 16:9 images. 42 Download recorded images Downloading recorded images from a recorder to a PC is possible. Using the download panel, downloading images is done. • Download recorded images The name of the image file downloaded is decided as follows. example : 01_070209121500_0515.n3r (Ch number : 1, Starting date and time : February 9th, 2007, 12:15:00, Duration : 5 min 15 sec.) • Playback is done by Viewer software. Viewer software • Up to 64 cameras’ images can be downloaded at a time. • When more than one camera channel are specified, download is done for each camera. • One recorder can be specified for download at a time. • The maximum duration of downloaded images is 24 hours. • The downloading duration is divided into every 10 minutes. So, the downloaded file is divided into pieces every 10 minutes duration. *When the aspect ratio of downloaded images is 16:9, playback images by the viewer software are vertically distorted. 43 File conversion A downloaded file of n3r format can be converted to a standardized mp4 file. A converted mp4 file can be played back by QuickTime, Windows Media Player, (Only under Windows 7) and so on. There is no restriction for n3r files. Any format n3r files can be converted. Converted files’ formats become H.264. Conversion time depends on the size of original images and the size of converted images. Click convert tool button. Specify downloaded files by drag and drop. (It can be selected from add button, too) When a n3r file exists, specify whether this is converted together. After conversion, it becomes a mp4 system file. Image size is specified after the conversion. 1920*1080/1280*960/1280*720/ 960*720/800*600/720*576/ 720*480/640*480/320*240 When files are connected, the order is the same as in the list. Use up and down button to change the order of files if necessary. Selection whether more than one files are connected into one file. 44 Operations for images EL-zoom, Saving still images and printing can be done. • EL-zoom (1,2,4 times) When right-clicking on the image display area, the pop-up menu will be displayed. (*Selection from the displayed pop-up menu is available only when right-clicking on a 1-screen.) For example in the right figure, select EL zoom from x1, x2 or x4. • Saving still images Still images can be saved as JPEG format. • Printing Printing live images or recorded images is possible. *When a still image is save or printed during EL-zoom, the zoomed image is saved or printed. (Except for WJ-HD316A and WJ-HD309A) Alarm Actions 45 If an alarm occurs, an alarm notification message window is popped up on the operation window. Several actions will take place to notify an alarm occurred. • • • • • • The buzzer starts sounding. A pop-up window is displayed. Alarm images are displayed. Alarm indication on a map (The camera icon blinks 10 seconds, after that, becomes red color.) Recorded in the alarm Log Playback can be done based on the alarm log Alarm notification If the map window or the live window is displayed on the operation window, an alarm pop-up window can not be displayed on the top of all the windows. Event Notification 46 A event notification message window is popped up to provide a notification message of a device error, a network error occurrence or an message that an error is recovered. Several actions will take place to notify an error occurred or has been recovered. • • • • The buzzer starts sounding. An error pop-up window will be displayed. An error is show on the map. The error information is logged. Event Notification If the map window or the live window is displayed on the operation window, an pop-up window can not be displayed on the top of all the windows. 47 Controller WV-CU950 working with WV-ASM200 Series* * Extension Software WV-ASE201 is required to use WV-CU950 in addition to WV-ASM200. WV-CU950 • Controller for network connection • WV-CU950 is used to operate PTZ dome cameras as a controller for WV-ASM200 Series. • Some part of recorder operations can also be done from the controller. Network Disk Recorder Digital Disk Recorder i-PRO PTZ cameras Network Operation of cameras (PAN, TILT, ZOOM, Pre-set) ＰＣ WV-CS950 WV-CW960 Operation of cameras (PAN, TILT, ZOOM, Pre-set) ASM200 + ASE201 WV-CU950 48 Ethernet System Controller WV-CU950 Camera/Recorder/Display control can be made with a hardware system controller WV-CU950 allowing intuitive operation. Group select Sequence (start/stop) AUX open/close Multiscreen selection Recorder Control Camera Control -Pan/Tilt -Zoom -Focus -Auto pan on/off -Auto track on/off Camera select Preset position select Preset program Ethernet System Controller with 3D-Joystick & Jog/Shuttle WV-CU950 49 Camera/Group/Sequence Selection by WV-CU950 - A camera can be selected by NUM key and CAM (SET) key. - A group or a sequence can be selected by NUM key and GROUP or TOUR SEQ key. - 1/4A/4B/4C/4D/9/16 screen mode can be selected by the F1 ~ F4 button. - Pressing the MULTISCREEN button will switch the multiscreen mode (1/4A/4B/4C/4D/9/16). - +/- keys on WV-CU950 controller can be used for camera channel switching of live image on an operation window. Camera channel increments (with + key) / decrements (with - key) along camera number setting in setup tool. [ASM200 setup software : Controller – Camera number menu] WV-ASM200 Operation window F1/F2/F3/F4 TOUR SEQ Group select ASM100 (recorder ) ZOOM （Slide Volume） Numeric key MULTISCREEN CAM (SET) WV-CU950 PAN/TILT 50 User Management •• There There are are two two types types of of users users :: Administrator Administrator and and Registered Registered user. user. •• Setting Setting user user management management can can be be done done only only by by the the administrator. administrator. •• A A customized customized menu menu is is displayed displayed according according to to the the level level defined defined for for aa registered registered user. user. Registered User ITEM Administrator LV1 LV2 LV3 LV4 Registration of the settings Display the current settings Alarm reset / error reset Print / Save as JPEG file File Conversion Download Manual recording Recorder control Preset position registration Operation of SD memory card Camera control Audio (Transmission) Display the alarm log Display the device error log Display the network error log LV5 The administrator can define each user level for LV2 to LV5. 51 User Management User authentication, user level restriction, auto login function, operation log management, password’s validation period management and operable cameras, etc. can be set by the user management menu. 52 Log Management There are roughly two types of logs. One is an application log and the other is a recorder log. The recorder log is made by a recorder. •Application log The application log records alarm information taken from recorders, device error information and system information of this software. The application log has the following log types. Alarm log, Device error log, Network error log, System log and Operation log. •Recorder log The recorder log records errors and events that occur in the recorders. The recorder log is made by a recorder. It is possible to download the recorder logs filed in each recorder and display/save them. The logs downloaded from the recorder and their contents are as follows. Error log, Access log, Event log and Network log. 53 Loading ASM100’s setup data by ASM200 It is possible for WV-ASM200 to load the setup data of WV-ASM100/100L. The The setup setup data data that that ASM200 ASM200 can can load. load. All versions of WV-ASM100 and WV-ASM100L. ASM200 can’t load the setup data of WV-ASM10. The following table shows the compatibility of the setup date between ASM100 series and ASM200 series. To ASM200 ASM200+ASE201 ASM100 YES (*) YES ASM100L YES YES From *The setup data for the functions supported by WV-ASE201 is migrated from ASM100, but the functions don’t work and they aren’t shown at setup software’s screen if the license of WV-ASE201 hasn’t been registered. When the license of WV-ASE201 is additionally registered, these functions and setup operations are enabled. 54 WV-ASM200 series software package Folder structure 1.SQLServer2005 Install PC Software package WV-ASM200 2.Recoder Management Software 1. Setup Software A setup software’s screen Device registration, User registration and other setting up. (By the administrator) 2. Operation Software Operation and Control. (By users) An operation software’s screen PC 55 Items to be confirmed before installation Items Items to to be be confirmed confirmed Confirm if the Operating System’s service pack version is the same as that shown in the table. If it is old, apply the service pack to the OS at first. OS Required Service Pack Windows Vista SP2 Windows 7 SP1 Before installing this software, make sure that no other Panasonic disk recorder management software such as WV-AS65, WV-ASM10 or WV-ASM100/ASM100L is installed on the PC.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021